[PATCH] m68knommu: register map setup for MOD5272 board
[deliverable/linux.git] / arch / m68knommu / platform / 5272 / config.c
CommitLineData
1da177e4
LT
1/***************************************************************************/
2
3/*
4 * linux/arch/m68knommu/platform/5272/config.c
5 *
6 * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
7 * Copyright (C) 2001-2002, SnapGear Inc. (www.snapgear.com)
8 */
9
10/***************************************************************************/
11
12#include <linux/config.h>
13#include <linux/kernel.h>
14#include <linux/sched.h>
15#include <linux/param.h>
16#include <linux/init.h>
17#include <linux/interrupt.h>
18#include <asm/irq.h>
19#include <asm/dma.h>
20#include <asm/traps.h>
21#include <asm/machdep.h>
22#include <asm/coldfire.h>
23#include <asm/mcftimer.h>
24#include <asm/mcfsim.h>
25#include <asm/mcfdma.h>
26
27/***************************************************************************/
28
29void coldfire_tick(void);
30void coldfire_timer_init(irqreturn_t (*handler)(int, void *, struct pt_regs *));
31unsigned long coldfire_timer_offset(void);
32void coldfire_trap_init(void);
33void coldfire_reset(void);
34
35extern unsigned int mcf_timervector;
36extern unsigned int mcf_profilevector;
37extern unsigned int mcf_timerlevel;
38
39/***************************************************************************/
40
41/*
42 * Some platforms need software versions of the GPIO data registers.
43 */
44unsigned short ppdata;
45unsigned char ledbank = 0xff;
46
47/***************************************************************************/
48
49/*
50 * DMA channel base address table.
51 */
52unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = {
53 MCF_MBAR + MCFDMA_BASE0,
54};
55
56unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
57
58/***************************************************************************/
59
60void mcf_disableall(void)
61{
62 volatile unsigned long *icrp;
63
64 icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
65 icrp[0] = 0x88888888;
66 icrp[1] = 0x88888888;
67 icrp[2] = 0x88888888;
68 icrp[3] = 0x88888888;
69}
70
71/***************************************************************************/
72
73void mcf_autovector(unsigned int vec)
74{
75 /* Everything is auto-vectored on the 5272 */
76}
77
78/***************************************************************************/
79
80void mcf_settimericr(int timer, int level)
81{
82 volatile unsigned long *icrp;
83
84 if ((timer >= 1 ) && (timer <= 4)) {
85 icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
86 *icrp = (0x8 | level) << ((4 - timer) * 4);
87 }
88}
89
90/***************************************************************************/
91
92int mcf_timerirqpending(int timer)
93{
94 volatile unsigned long *icrp;
95
96 if ((timer >= 1 ) && (timer <= 4)) {
97 icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
98 return (*icrp & (0x8 << ((4 - timer) * 4)));
99 }
100 return 0;
101}
102
103/***************************************************************************/
104
105void config_BSP(char *commandp, int size)
106{
a7962660
GU
107#if defined (CONFIG_MOD5272)
108 volatile unsigned char *pivrp;
1da177e4
LT
109
110 /* Set base of device vectors to be 64 */
a7962660 111 pivrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_PIVR);
1da177e4
LT
112 *pivrp = 0x40;
113#endif
114
115 mcf_disableall();
116
117#if defined(CONFIG_BOOTPARAM)
118 strncpy(commandp, CONFIG_BOOTPARAM_STRING, size);
119 commandp[size-1] = 0;
120#elif defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
121 /* Copy command line from FLASH to local buffer... */
122 memcpy(commandp, (char *) 0xf0004000, size);
123 commandp[size-1] = 0;
124#elif defined(CONFIG_MTD_KeyTechnology)
125 /* Copy command line from FLASH to local buffer... */
126 memcpy(commandp, (char *) 0xffe06000, size);
127 commandp[size-1] = 0;
128#elif defined(CONFIG_CANCam)
129 /* Copy command line from FLASH to local buffer... */
130 memcpy(commandp, (char *) 0xf0010000, size);
131 commandp[size-1] = 0;
132#else
133 memset(commandp, 0, size);
134#endif
135
136 mcf_timervector = 69;
137 mcf_profilevector = 70;
138 mach_sched_init = coldfire_timer_init;
139 mach_tick = coldfire_tick;
140 mach_gettimeoffset = coldfire_timer_offset;
141 mach_trap_init = coldfire_trap_init;
142 mach_reset = coldfire_reset;
143}
144
145/***************************************************************************/
This page took 0.086738 seconds and 5 git commands to generate.