Linux-2.6.12-rc2
[deliverable/linux.git] / arch / mips / au1000 / common / setup.c
CommitLineData
1da177e4
LT
1/*
2 * Copyright 2000 MontaVista Software Inc.
3 * Author: MontaVista Software, Inc.
4 * ppopov@mvista.com or source@mvista.com
5 *
6 * Updates to 2.6, Pete Popov, Embedded Alley Solutions, Inc.
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
12 *
13 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
14 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
15 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
16 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
17 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
18 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
19 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
20 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
21 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
23 *
24 * You should have received a copy of the GNU General Public License along
25 * with this program; if not, write to the Free Software Foundation, Inc.,
26 * 675 Mass Ave, Cambridge, MA 02139, USA.
27 */
28#include <linux/config.h>
29#include <linux/init.h>
30#include <linux/sched.h>
31#include <linux/ioport.h>
32#include <linux/mm.h>
33#include <linux/delay.h>
34#include <linux/interrupt.h>
35
36#include <asm/cpu.h>
37#include <asm/bootinfo.h>
38#include <asm/irq.h>
39#include <asm/mipsregs.h>
40#include <asm/reboot.h>
41#include <asm/pgtable.h>
42#include <asm/mach-au1x00/au1000.h>
43#include <asm/time.h>
44
45extern char * __init prom_getcmdline(void);
46extern void __init board_setup(void);
47extern void au1000_restart(char *);
48extern void au1000_halt(void);
49extern void au1000_power_off(void);
50extern struct resource ioport_resource;
51extern struct resource iomem_resource;
52extern void (*board_time_init)(void);
53extern void au1x_time_init(void);
54extern void (*board_timer_setup)(struct irqaction *irq);
55extern void au1x_timer_setup(struct irqaction *irq);
56extern void au1xxx_time_init(void);
57extern void au1xxx_timer_setup(struct irqaction *irq);
58extern void set_cpuspec(void);
59
60static int __init au1x00_setup(void)
61{
62 struct cpu_spec *sp;
63 char *argptr;
64 unsigned long prid, cpupll, bclk = 1;
65
66 set_cpuspec();
67 sp = cur_cpu_spec[0];
68
69 board_setup(); /* board specific setup */
70
71 prid = read_c0_prid();
72 cpupll = (au_readl(0xB1900060) & 0x3F) * 12;
73 printk("(PRId %08lx) @ %ldMHZ\n", prid, cpupll);
74
75 bclk = sp->cpu_bclk;
76 if (bclk)
77 {
78 /* Enable BCLK switching */
79 bclk = au_readl(0xB190003C);
80 au_writel(bclk | 0x60, 0xB190003C);
81 printk("BCLK switching enabled!\n");
82 }
83
84 if (sp->cpu_od) {
85 /* Various early Au1000 Errata corrected by this */
86 set_c0_config(1<<19); /* Set Config[OD] */
87 }
88 else {
89 /* Clear to obtain best system bus performance */
90 clear_c0_config(1<<19); /* Clear Config[OD] */
91 }
92
93 argptr = prom_getcmdline();
94
95#ifdef CONFIG_SERIAL_AU1X00_CONSOLE
96 if ((argptr = strstr(argptr, "console=")) == NULL) {
97 argptr = prom_getcmdline();
98 strcat(argptr, " console=ttyS0,115200");
99 }
100#endif
101
102#ifdef CONFIG_FB_AU1100
103 if ((argptr = strstr(argptr, "video=")) == NULL) {
104 argptr = prom_getcmdline();
105 /* default panel */
106 /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
107#ifdef CONFIG_MIPS_HYDROGEN3
108 strcat(argptr, " video=au1100fb:panel:Hydrogen_3_NEC_panel_320x240,nohwcursor");
109#else
110 strcat(argptr, " video=au1100fb:panel:s10,nohwcursor");
111#endif
112 }
113#endif
114
115#ifdef CONFIG_FB_E1356
116 if ((argptr = strstr(argptr, "video=")) == NULL) {
117 argptr = prom_getcmdline();
118#ifdef CONFIG_MIPS_PB1000
119 strcat(argptr, " video=e1356fb:system:pb1000,mmunalign:1");
120#else
121 strcat(argptr, " video=e1356fb:system:pb1500");
122#endif
123 }
124#endif
125
126#ifdef CONFIG_FB_XPERT98
127 if ((argptr = strstr(argptr, "video=")) == NULL) {
128 argptr = prom_getcmdline();
129 strcat(argptr, " video=atyfb:1024x768-8@70");
130 }
131#endif
132
133#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
134 /* au1000 does not support vra, au1500 and au1100 do */
135 strcat(argptr, " au1000_audio=vra");
136 argptr = prom_getcmdline();
137#endif
138 _machine_restart = au1000_restart;
139 _machine_halt = au1000_halt;
140 _machine_power_off = au1000_power_off;
141 board_time_init = au1xxx_time_init;
142 board_timer_setup = au1xxx_timer_setup;
143
144 /* IO/MEM resources. */
145 set_io_port_base(0);
146 ioport_resource.start = IOPORT_RESOURCE_START;
147 ioport_resource.end = IOPORT_RESOURCE_END;
148 iomem_resource.start = IOMEM_RESOURCE_START;
149 iomem_resource.end = IOMEM_RESOURCE_END;
150
151 while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_E0S);
152 au_writel(SYS_CNTRL_E0 | SYS_CNTRL_EN0, SYS_COUNTER_CNTRL);
153 au_sync();
154 while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S);
155 au_writel(0, SYS_TOYTRIM);
156
157 return 0;
158}
159
160early_initcall(au1x00_setup);
161
162#if defined(CONFIG_64BIT_PHYS_ADDR)
163/* This routine should be valid for all Au1x based boards */
164phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
165{
166 u32 start, end;
167
168 /* Don't fixup 36 bit addresses */
169 if ((phys_addr >> 32) != 0) return phys_addr;
170
171#ifdef CONFIG_PCI
172 start = (u32)Au1500_PCI_MEM_START;
173 end = (u32)Au1500_PCI_MEM_END;
174 /* check for pci memory window */
175 if ((phys_addr >= start) && ((phys_addr + size) < end)) {
176 return (phys_t)((phys_addr - start) + Au1500_PCI_MEM_START);
177 }
178#endif
179
180 /* All Au1x SOCs have a pcmcia controller */
181 /* We setup our 32 bit pseudo addresses to be equal to the
182 * 36 bit addr >> 4, to make it easier to check the address
183 * and fix it.
184 * The Au1x socket 0 phys attribute address is 0xF 4000 0000.
185 * The pseudo address we use is 0xF400 0000. Any address over
186 * 0xF400 0000 is a pcmcia pseudo address.
187 */
188 if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF)) {
189 return (phys_t)(phys_addr << 4);
190 }
191
192 /* default nop */
193 return phys_addr;
194}
195#endif
This page took 0.029699 seconds and 5 git commands to generate.