MIPS: Add support for fine granularity task level IRQ time accounting
[deliverable/linux.git] / arch / mips / boot / dts / xlp_fvp.dts
CommitLineData
1cf0e1be
GR
1/*
2 * XLP2XX Device Tree Source for FVP boards
3 */
4
5/dts-v1/;
6/ {
7 model = "netlogic,XLP-FVP";
8 compatible = "netlogic,xlp";
9 #address-cells = <2>;
10 #size-cells = <2>;
11
12 soc {
13 #address-cells = <2>;
14 #size-cells = <1>;
15 compatible = "simple-bus";
16 ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
17 1 0 0 0x16000000 0x02000000>; // GBU chipselects
18
19 serial0: serial@30000 {
20 device_type = "serial";
21 compatible = "ns16550";
22 reg = <0 0x30100 0xa00>;
23 reg-shift = <2>;
24 reg-io-width = <4>;
25 clock-frequency = <133333333>;
26 interrupt-parent = <&pic>;
27 interrupts = <17>;
28 };
29 serial1: serial@31000 {
30 device_type = "serial";
31 compatible = "ns16550";
32 reg = <0 0x31100 0xa00>;
33 reg-shift = <2>;
34 reg-io-width = <4>;
35 clock-frequency = <133333333>;
36 interrupt-parent = <&pic>;
37 interrupts = <18>;
38 };
39 i2c0: ocores@37100 {
40 compatible = "opencores,i2c-ocores";
41 #address-cells = <1>;
42 #size-cells = <0>;
43 reg = <0 0x37100 0x20>;
44 reg-shift = <2>;
45 reg-io-width = <4>;
46 clock-frequency = <32000000>;
47 interrupt-parent = <&pic>;
48 interrupts = <30>;
49 };
50 i2c1: ocores@37120 {
51 compatible = "opencores,i2c-ocores";
52 #address-cells = <1>;
53 #size-cells = <0>;
54 reg = <0 0x37120 0x20>;
55 reg-shift = <2>;
56 reg-io-width = <4>;
57 clock-frequency = <32000000>;
58 interrupt-parent = <&pic>;
59 interrupts = <31>;
60
61 rtc@68 {
62 compatible = "dallas,ds1374";
63 reg = <0x68>;
64 };
65
66 dtt@4c {
67 compatible = "national,lm90";
68 reg = <0x4c>;
69 };
70 };
71 pic: pic@4000 {
72 compatible = "netlogic,xlp-pic";
73 #address-cells = <0>;
74 #interrupt-cells = <1>;
75 reg = <0 0x4000 0x200>;
76 interrupt-controller;
77 };
78
79 nor_flash@1,0 {
80 compatible = "cfi-flash";
81 #address-cells = <1>;
82 #size-cells = <1>;
83 bank-width = <2>;
84 reg = <1 0 0x1000000>;
85
86 partition@0 {
87 label = "x-loader";
88 reg = <0x0 0x100000>; /* 1M */
89 read-only;
90 };
91
92 partition@100000 {
93 label = "u-boot";
94 reg = <0x100000 0x100000>; /* 1M */
95 };
96
97 partition@200000 {
98 label = "kernel";
99 reg = <0x200000 0x500000>; /* 5M */
100 };
101
102 partition@700000 {
103 label = "rootfs";
104 reg = <0x700000 0x800000>; /* 8M */
105 };
106
107 partition@f00000 {
108 label = "env";
109 reg = <0xf00000 0x100000>; /* 1M */
110 read-only;
111 };
112 };
113 };
114
115 chosen {
116 bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
117 };
118};
This page took 0.094113 seconds and 5 git commands to generate.