Commit | Line | Data |
---|---|---|
59d13f9d BD |
1 | /* |
2 | * Analogue & Micro ASP8347 Device Tree Source | |
3 | * | |
4 | * Copyright 2008 Codehermit | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify it | |
7 | * under the terms of the GNU General Public License as published by the | |
8 | * Free Software Foundation; either version 2 of the License, or (at your | |
9 | * option) any later version. | |
10 | */ | |
11 | ||
12 | /dts-v1/; | |
13 | ||
14 | / { | |
15 | model = "Analogue & Micro ASP8347E"; | |
16 | compatible = "analogue-and-micro,asp8347e"; | |
17 | #address-cells = <1>; | |
18 | #size-cells = <1>; | |
19 | ||
20 | aliases { | |
21 | ethernet0 = &enet0; | |
22 | ethernet1 = &enet1; | |
23 | serial0 = &serial0; | |
24 | serial1 = &serial1; | |
25 | }; | |
26 | ||
27 | cpus { | |
28 | #address-cells = <1>; | |
29 | #size-cells = <0>; | |
30 | ||
31 | PowerPC,8347@0 { | |
32 | device_type = "cpu"; | |
33 | reg = <0x0>; | |
34 | d-cache-line-size = <32>; | |
35 | i-cache-line-size = <32>; | |
36 | d-cache-size = <32768>; | |
37 | i-cache-size = <32768>; | |
38 | timebase-frequency = <0>; // from bootloader | |
39 | bus-frequency = <0>; // from bootloader | |
40 | clock-frequency = <0>; // from bootloader | |
41 | }; | |
42 | }; | |
43 | ||
44 | memory { | |
45 | device_type = "memory"; | |
46 | reg = <0x00000000 0x8000000>; // 128MB at 0 | |
47 | }; | |
48 | ||
49 | localbus@ff005000 { | |
50 | #address-cells = <2>; | |
51 | #size-cells = <1>; | |
52 | compatible = "fsl,mpc8347e-localbus", | |
53 | "fsl,pq2pro-localbus", | |
54 | "simple-bus"; | |
55 | reg = <0xff005000 0x1000>; | |
56 | interrupts = <77 0x8>; | |
57 | interrupt-parent = <&ipic>; | |
58 | ||
59 | ranges = < | |
60 | 0 0 0xf0000000 0x02000000 | |
61 | >; | |
62 | ||
63 | flash@0,0 { | |
64 | compatible = "cfi-flash"; | |
65 | reg = <0 0 0x02000000>; | |
66 | bank-width = <2>; | |
67 | device-width = <2>; | |
68 | }; | |
69 | }; | |
70 | ||
71 | soc8349@ff000000 { | |
72 | #address-cells = <1>; | |
73 | #size-cells = <1>; | |
74 | device_type = "soc"; | |
75 | ranges = <0x0 0xff000000 0x00100000>; | |
76 | reg = <0xff000000 0x00000200>; | |
77 | bus-frequency = <0>; | |
78 | ||
79 | wdt@200 { | |
80 | device_type = "watchdog"; | |
81 | compatible = "mpc83xx_wdt"; | |
82 | reg = <0x200 0x100>; | |
83 | }; | |
84 | ||
85 | i2c@3000 { | |
86 | #address-cells = <1>; | |
87 | #size-cells = <0>; | |
88 | cell-index = <0>; | |
89 | compatible = "fsl-i2c"; | |
90 | reg = <0x3000 0x100>; | |
91 | interrupts = <14 0x8>; | |
92 | interrupt-parent = <&ipic>; | |
93 | dfsrr; | |
94 | ||
95 | rtc@68 { | |
96 | compatible = "dallas,ds1374"; | |
97 | reg = <0x68>; | |
98 | }; | |
99 | }; | |
100 | ||
101 | i2c@3100 { | |
102 | #address-cells = <1>; | |
103 | #size-cells = <0>; | |
104 | cell-index = <1>; | |
105 | compatible = "fsl-i2c"; | |
106 | reg = <0x3100 0x100>; | |
107 | interrupts = <15 0x8>; | |
108 | interrupt-parent = <&ipic>; | |
109 | dfsrr; | |
110 | }; | |
111 | ||
112 | spi@7000 { | |
113 | cell-index = <0>; | |
114 | compatible = "fsl,spi"; | |
115 | reg = <0x7000 0x1000>; | |
116 | interrupts = <16 0x8>; | |
117 | interrupt-parent = <&ipic>; | |
118 | mode = "cpu"; | |
119 | }; | |
120 | ||
dee80553 KG |
121 | dma@82a8 { |
122 | #address-cells = <1>; | |
123 | #size-cells = <1>; | |
124 | compatible = "fsl,mpc8347-dma", "fsl,elo-dma"; | |
125 | reg = <0x82a8 4>; | |
126 | ranges = <0 0x8100 0x1a8>; | |
127 | interrupt-parent = <&ipic>; | |
128 | interrupts = <71 8>; | |
129 | cell-index = <0>; | |
130 | dma-channel@0 { | |
131 | compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; | |
132 | reg = <0 0x80>; | |
aeb42762 | 133 | cell-index = <0>; |
dee80553 KG |
134 | interrupt-parent = <&ipic>; |
135 | interrupts = <71 8>; | |
136 | }; | |
137 | dma-channel@80 { | |
138 | compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; | |
139 | reg = <0x80 0x80>; | |
aeb42762 | 140 | cell-index = <1>; |
dee80553 KG |
141 | interrupt-parent = <&ipic>; |
142 | interrupts = <71 8>; | |
143 | }; | |
144 | dma-channel@100 { | |
145 | compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; | |
146 | reg = <0x100 0x80>; | |
aeb42762 | 147 | cell-index = <2>; |
dee80553 KG |
148 | interrupt-parent = <&ipic>; |
149 | interrupts = <71 8>; | |
150 | }; | |
151 | dma-channel@180 { | |
152 | compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; | |
153 | reg = <0x180 0x28>; | |
aeb42762 | 154 | cell-index = <3>; |
dee80553 KG |
155 | interrupt-parent = <&ipic>; |
156 | interrupts = <71 8>; | |
157 | }; | |
158 | }; | |
159 | ||
59d13f9d BD |
160 | /* phy type (ULPI or SERIAL) are only types supported for MPH */ |
161 | /* port = 0 or 1 */ | |
162 | usb@22000 { | |
163 | compatible = "fsl-usb2-mph"; | |
164 | reg = <0x22000 0x1000>; | |
165 | #address-cells = <1>; | |
166 | #size-cells = <0>; | |
167 | interrupt-parent = <&ipic>; | |
168 | interrupts = <39 0x8>; | |
169 | phy_type = "ulpi"; | |
b7d66c88 | 170 | port0; |
59d13f9d BD |
171 | }; |
172 | /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ | |
173 | usb@23000 { | |
174 | compatible = "fsl-usb2-dr"; | |
175 | reg = <0x23000 0x1000>; | |
176 | #address-cells = <1>; | |
177 | #size-cells = <0>; | |
178 | interrupt-parent = <&ipic>; | |
179 | interrupts = <38 0x8>; | |
180 | dr_mode = "otg"; | |
181 | phy_type = "ulpi"; | |
182 | }; | |
183 | ||
59d13f9d | 184 | enet0: ethernet@24000 { |
70b3adbb AV |
185 | #address-cells = <1>; |
186 | #size-cells = <1>; | |
59d13f9d BD |
187 | cell-index = <0>; |
188 | device_type = "network"; | |
189 | model = "TSEC"; | |
190 | compatible = "gianfar"; | |
191 | reg = <0x24000 0x1000>; | |
70b3adbb | 192 | ranges = <0x0 0x24000 0x1000>; |
59d13f9d BD |
193 | local-mac-address = [ 00 08 e5 11 32 33 ]; |
194 | interrupts = <32 0x8 33 0x8 34 0x8>; | |
195 | interrupt-parent = <&ipic>; | |
b31a1d8b | 196 | tbi-handle = <&tbi0>; |
59d13f9d BD |
197 | phy-handle = <&phy0>; |
198 | linux,network-index = <0>; | |
70b3adbb AV |
199 | |
200 | mdio@520 { | |
201 | #address-cells = <1>; | |
202 | #size-cells = <0>; | |
203 | compatible = "fsl,gianfar-mdio"; | |
204 | reg = <0x520 0x20>; | |
205 | ||
206 | phy0: ethernet-phy@0 { | |
207 | interrupt-parent = <&ipic>; | |
208 | interrupts = <17 0x8>; | |
209 | reg = <0x1>; | |
70b3adbb AV |
210 | }; |
211 | ||
212 | phy1: ethernet-phy@1 { | |
213 | interrupt-parent = <&ipic>; | |
214 | interrupts = <18 0x8>; | |
215 | reg = <0x2>; | |
70b3adbb AV |
216 | }; |
217 | ||
218 | tbi0: tbi-phy@11 { | |
219 | reg = <0x11>; | |
220 | device_type = "tbi-phy"; | |
221 | }; | |
222 | }; | |
59d13f9d BD |
223 | }; |
224 | ||
225 | enet1: ethernet@25000 { | |
70b3adbb AV |
226 | #address-cells = <1>; |
227 | #size-cells = <1>; | |
59d13f9d BD |
228 | cell-index = <1>; |
229 | device_type = "network"; | |
230 | model = "TSEC"; | |
231 | compatible = "gianfar"; | |
232 | reg = <0x25000 0x1000>; | |
70b3adbb | 233 | ranges = <0x0 0x25000 0x1000>; |
59d13f9d BD |
234 | local-mac-address = [ 00 08 e5 11 32 34 ]; |
235 | interrupts = <35 0x8 36 0x8 37 0x8>; | |
236 | interrupt-parent = <&ipic>; | |
b31a1d8b | 237 | tbi-handle = <&tbi1>; |
59d13f9d BD |
238 | phy-handle = <&phy1>; |
239 | linux,network-index = <1>; | |
70b3adbb AV |
240 | |
241 | mdio@520 { | |
242 | #address-cells = <1>; | |
243 | #size-cells = <0>; | |
244 | compatible = "fsl,gianfar-tbi"; | |
245 | reg = <0x520 0x20>; | |
246 | ||
247 | tbi1: tbi-phy@11 { | |
248 | reg = <0x11>; | |
249 | device_type = "tbi-phy"; | |
250 | }; | |
251 | }; | |
59d13f9d BD |
252 | }; |
253 | ||
254 | serial0: serial@4500 { | |
255 | cell-index = <0>; | |
256 | device_type = "serial"; | |
f706bed1 | 257 | compatible = "fsl,ns16550", "ns16550"; |
59d13f9d BD |
258 | reg = <0x4500 0x100>; |
259 | clock-frequency = <400000000>; | |
260 | interrupts = <9 0x8>; | |
261 | interrupt-parent = <&ipic>; | |
262 | }; | |
263 | ||
264 | serial1: serial@4600 { | |
265 | cell-index = <1>; | |
266 | device_type = "serial"; | |
f706bed1 | 267 | compatible = "fsl,ns16550", "ns16550"; |
59d13f9d BD |
268 | reg = <0x4600 0x100>; |
269 | clock-frequency = <400000000>; | |
270 | interrupts = <10 0x8>; | |
271 | interrupt-parent = <&ipic>; | |
272 | }; | |
273 | ||
274 | /* May need to remove if on a part without crypto engine */ | |
275 | crypto@30000 { | |
276 | device_type = "crypto"; | |
277 | model = "SEC2"; | |
278 | compatible = "talitos"; | |
279 | reg = <0x30000 0x10000>; | |
280 | interrupts = <11 0x8>; | |
281 | interrupt-parent = <&ipic>; | |
282 | num-channels = <4>; | |
283 | channel-fifo-len = <24>; | |
284 | exec-units-mask = <0x0000007e>; | |
285 | /* desc mask is for rev2.0, | |
286 | * we need runtime fixup for >2.0 */ | |
287 | descriptor-types-mask = <0x01010ebf>; | |
288 | }; | |
289 | ||
290 | /* IPIC | |
291 | * interrupts cell = <intr #, sense> | |
292 | * sense values match linux IORESOURCE_IRQ_* defines: | |
293 | * sense == 8: Level, low assertion | |
294 | * sense == 2: Edge, high-to-low change | |
295 | */ | |
296 | ipic: pic@700 { | |
297 | interrupt-controller; | |
298 | #address-cells = <0>; | |
299 | #interrupt-cells = <2>; | |
300 | reg = <0x700 0x100>; | |
301 | device_type = "ipic"; | |
302 | }; | |
303 | }; | |
304 | ||
305 | chosen { | |
306 | bootargs = "console=ttyS0,38400 root=/dev/mtdblock3 rootfstype=jffs2"; | |
307 | linux,stdout-path = &serial0; | |
308 | }; | |
309 | ||
310 | }; |