[deliverable/linux.git] / arch / powerpc / boot / dts / mpc8315erdb.dts

/*
 * MPC8315E RDB Device Tree Source
 *
 * Copyright 2007 Freescale Semiconductor Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

/dts-v1/;

/ {
	compatible = "fsl,mpc8315erdb";
	#address-cells = <1>;
	#size-cells = <1>;

	aliases {
		ethernet0 = &enet0;
		ethernet1 = &enet1;
		serial0 = &serial0;
		serial1 = &serial1;
		pci0 = &pci0;
		pci1 = &pci1;
		pci2 = &pci2;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,8315@0 {
			device_type = "cpu";
			reg = <0x0>;
			d-cache-line-size = <32>;
			i-cache-line-size = <32>;
			d-cache-size = <16384>;
			i-cache-size = <16384>;
			timebase-frequency = <0>;	// from bootloader
			bus-frequency = <0>;		// from bootloader
			clock-frequency = <0>;		// from bootloader
		};
	};

	memory {
		device_type = "memory";
		reg = <0x00000000 0x08000000>;	// 128MB at 0
	};

	localbus@e0005000 {
		#address-cells = <2>;
		#size-cells = <1>;
		compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
		reg = <0xe0005000 0x1000>;
		interrupts = <77 0x8>;
		interrupt-parent = <&ipic>;

		// CS0 and CS1 are swapped when
		// booting from nand, but the
		// addresses are the same.
		ranges = <0x0 0x0 0xfe000000 0x00800000
		          0x1 0x0 0xe0600000 0x00002000
		          0x2 0x0 0xf0000000 0x00020000
		          0x3 0x0 0xfa000000 0x00008000>;

		flash@0,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "cfi-flash";
			reg = <0x0 0x0 0x800000>;
			bank-width = <2>;
			device-width = <1>;
		};

		nand@1,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,mpc8315-fcm-nand",
			             "fsl,elbc-fcm-nand";
			reg = <0x1 0x0 0x2000>;

			u-boot@0 {
				reg = <0x0 0x100000>;
				read-only;
			};

			kernel@100000 {
				reg = <0x100000 0x300000>;
			};
			fs@400000 {
				reg = <0x400000 0x1c00000>;
			};
		};
	};

	immr@e0000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		compatible = "fsl,mpc8315-immr", "simple-bus";
		ranges = <0 0xe0000000 0x00100000>;
		reg = <0xe0000000 0x00000200>;
		bus-frequency = <0>;

		wdt@200 {
			device_type = "watchdog";
			compatible = "mpc83xx_wdt";
			reg = <0x200 0x100>;
		};

		i2c@3000 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <0>;
			compatible = "fsl-i2c";
			reg = <0x3000 0x100>;
			interrupts = <14 0x8>;
			interrupt-parent = <&ipic>;
			dfsrr;
			rtc@68 {
				compatible = "dallas,ds1339";
				reg = <0x68>;
			};

			mcu_pio: mcu@a {
				#gpio-cells = <2>;
				compatible = "fsl,mc9s08qg8-mpc8315erdb",
					     "fsl,mcu-mpc8349emitx";
				reg = <0x0a>;
				gpio-controller;
			};
		};

		spi@7000 {
			cell-index = <0>;
			compatible = "fsl,spi";
			reg = <0x7000 0x1000>;
			interrupts = <16 0x8>;
			interrupt-parent = <&ipic>;
			mode = "cpu";
		};

		dma@82a8 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,mpc8315-dma", "fsl,elo-dma";
			reg = <0x82a8 4>;
			ranges = <0 0x8100 0x1a8>;
			interrupt-parent = <&ipic>;
			interrupts = <71 8>;
			cell-index = <0>;
			dma-channel@0 {
				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
				reg = <0 0x80>;
				cell-index = <0>;
				interrupt-parent = <&ipic>;
				interrupts = <71 8>;
			};
			dma-channel@80 {
				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
				reg = <0x80 0x80>;
				cell-index = <1>;
				interrupt-parent = <&ipic>;
				interrupts = <71 8>;
			};
			dma-channel@100 {
				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
				reg = <0x100 0x80>;
				cell-index = <2>;
				interrupt-parent = <&ipic>;
				interrupts = <71 8>;
			};
			dma-channel@180 {
				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
				reg = <0x180 0x28>;
				cell-index = <3>;
				interrupt-parent = <&ipic>;
				interrupts = <71 8>;
			};
		};

		usb@23000 {
			compatible = "fsl-usb2-dr";
			reg = <0x23000 0x1000>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupt-parent = <&ipic>;
			interrupts = <38 0x8>;
			phy_type = "utmi";
		};

		enet0: ethernet@24000 {
			#address-cells = <1>;
			#size-cells = <1>;
			cell-index = <0>;
			device_type = "network";
			model = "eTSEC";
			compatible = "gianfar";
			reg = <0x24000 0x1000>;
			ranges = <0x0 0x24000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <32 0x8 33 0x8 34 0x8>;
			interrupt-parent = <&ipic>;
			tbi-handle = <&tbi0>;
			phy-handle = < &phy0 >;
			fsl,magic-packet;

			mdio@520 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,gianfar-mdio";
				reg = <0x520 0x20>;

				phy0: ethernet-phy@0 {
					interrupt-parent = <&ipic>;
					interrupts = <20 0x8>;
					reg = <0x0>;
				};

				phy1: ethernet-phy@1 {
					interrupt-parent = <&ipic>;
					interrupts = <19 0x8>;
					reg = <0x1>;
				};

				tbi0: tbi-phy@11 {
					reg = <0x11>;
					device_type = "tbi-phy";
				};
			};
		};

		enet1: ethernet@25000 {
			#address-cells = <1>;
			#size-cells = <1>;
			cell-index = <1>;
			device_type = "network";
			model = "eTSEC";
			compatible = "gianfar";
			reg = <0x25000 0x1000>;
			ranges = <0x0 0x25000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <35 0x8 36 0x8 37 0x8>;
			interrupt-parent = <&ipic>;
			tbi-handle = <&tbi1>;
			phy-handle = < &phy1 >;
			fsl,magic-packet;

			mdio@520 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,gianfar-tbi";
				reg = <0x520 0x20>;

				tbi1: tbi-phy@11 {
					reg = <0x11>;
					device_type = "tbi-phy";
				};
			};
		};

		serial0: serial@4500 {
			cell-index = <0>;
			device_type = "serial";
			compatible = "fsl,ns16550", "ns16550";
			reg = <0x4500 0x100>;
			clock-frequency = <133333333>;
			interrupts = <9 0x8>;
			interrupt-parent = <&ipic>;
		};

		serial1: serial@4600 {
			cell-index = <1>;
			device_type = "serial";
			compatible = "fsl,ns16550", "ns16550";
			reg = <0x4600 0x100>;
			clock-frequency = <133333333>;
			interrupts = <10 0x8>;
			interrupt-parent = <&ipic>;
		};

		crypto@30000 {
			compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
				     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
				     "fsl,sec2.0";
			reg = <0x30000 0x10000>;
			interrupts = <11 0x8>;
			interrupt-parent = <&ipic>;
			fsl,num-channels = <4>;
			fsl,channel-fifo-len = <24>;
			fsl,exec-units-mask = <0x97c>;
			fsl,descriptor-types-mask = <0x3a30abf>;
		};

		sata@18000 {
			compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
			reg = <0x18000 0x1000>;
			cell-index = <1>;
			interrupts = <44 0x8>;
			interrupt-parent = <&ipic>;
		};

		sata@19000 {
			compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
			reg = <0x19000 0x1000>;
			cell-index = <2>;
			interrupts = <45 0x8>;
			interrupt-parent = <&ipic>;
		};

		gtm1: timer@500 {
			compatible = "fsl,mpc8315-gtm", "fsl,gtm";
			reg = <0x500 0x100>;
			interrupts = <90 8 78 8 84 8 72 8>;
			interrupt-parent = <&ipic>;
			clock-frequency = <133333333>;
		};

		timer@600 {
			compatible = "fsl,mpc8315-gtm", "fsl,gtm";
			reg = <0x600 0x100>;
			interrupts = <91 8 79 8 85 8 73 8>;
			interrupt-parent = <&ipic>;
			clock-frequency = <133333333>;
		};

		/* IPIC
		 * interrupts cell = <intr #, sense>
		 * sense values match linux IORESOURCE_IRQ_* defines:
		 * sense == 8: Level, low assertion
		 * sense == 2: Edge, high-to-low change
		 */
		ipic: interrupt-controller@700 {
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <2>;
			reg = <0x700 0x100>;
			device_type = "ipic";
		};

		ipic-msi@7c0 {
			compatible = "fsl,ipic-msi";
			reg = <0x7c0 0x40>;
			msi-available-ranges = <0 0x100>;
			interrupts = <0x43 0x8
				      0x4  0x8
				      0x51 0x8
				      0x52 0x8
				      0x56 0x8
				      0x57 0x8
				      0x58 0x8
				      0x59 0x8>;
			interrupt-parent = < &ipic >;
		};

		pmc: power@b00 {
			compatible = "fsl,mpc8315-pmc", "fsl,mpc8313-pmc",
				     "fsl,mpc8349-pmc";
			reg = <0xb00 0x100 0xa00 0x100>;
			interrupts = <80 8>;
			interrupt-parent = <&ipic>;
			fsl,mpc8313-wakeup-timer = <&gtm1>;
		};
	};

	pci0: pci@e0008500 {
		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
		interrupt-map = <
				/* IDSEL 0x0E -mini PCI */
				 0x7000 0x0 0x0 0x1 &ipic 18 0x8
				 0x7000 0x0 0x0 0x2 &ipic 18 0x8
				 0x7000 0x0 0x0 0x3 &ipic 18 0x8
				 0x7000 0x0 0x0 0x4 &ipic 18 0x8

				/* IDSEL 0x0F -mini PCI */
				 0x7800 0x0 0x0 0x1 &ipic 17 0x8
				 0x7800 0x0 0x0 0x2 &ipic 17 0x8
				 0x7800 0x0 0x0 0x3 &ipic 17 0x8
				 0x7800 0x0 0x0 0x4 &ipic 17 0x8

				/* IDSEL 0x10 - PCI slot */
				 0x8000 0x0 0x0 0x1 &ipic 48 0x8
				 0x8000 0x0 0x0 0x2 &ipic 17 0x8
				 0x8000 0x0 0x0 0x3 &ipic 48 0x8
				 0x8000 0x0 0x0 0x4 &ipic 17 0x8>;
		interrupt-parent = <&ipic>;
		interrupts = <66 0x8>;
		bus-range = <0x0 0x0>;
		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
			  0x42000000 0 0x80000000 0x80000000 0 0x10000000
			  0x01000000 0 0x00000000 0xe0300000 0 0x00100000>;
		clock-frequency = <66666666>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0xe0008500 0x100		/* internal registers */
		       0xe0008300 0x8>;		/* config space access registers */
		compatible = "fsl,mpc8349-pci";
		device_type = "pci";
	};

	pci1: pcie@e0009000 {
		#address-cells = <3>;
		#size-cells = <2>;
		#interrupt-cells = <1>;
		device_type = "pci";
		compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
		reg = <0xe0009000 0x00001000>;
		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
		          0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
		bus-range = <0 255>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <0 0 0 1 &ipic 1 8
				 0 0 0 2 &ipic 1 8
				 0 0 0 3 &ipic 1 8
				 0 0 0 4 &ipic 1 8>;
		clock-frequency = <0>;

		pcie@0 {
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			reg = <0 0 0 0 0>;
			ranges = <0x02000000 0 0xa0000000
				  0x02000000 0 0xa0000000
				  0 0x10000000
				  0x01000000 0 0x00000000
				  0x01000000 0 0x00000000
				  0 0x00800000>;
		};
	};

	pci2: pcie@e000a000 {
		#address-cells = <3>;
		#size-cells = <2>;
		#interrupt-cells = <1>;
		device_type = "pci";
		compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
		reg = <0xe000a000 0x00001000>;
		ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000
			  0x01000000 0 0x00000000 0xd1000000 0 0x00800000>;
		bus-range = <0 255>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <0 0 0 1 &ipic 2 8
				 0 0 0 2 &ipic 2 8
				 0 0 0 3 &ipic 2 8
				 0 0 0 4 &ipic 2 8>;
		clock-frequency = <0>;

		pcie@0 {
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			reg = <0 0 0 0 0>;
			ranges = <0x02000000 0 0xc0000000
				  0x02000000 0 0xc0000000
				  0 0x10000000
				  0x01000000 0 0x00000000
				  0x01000000 0 0x00000000
				  0 0x00800000>;
		};
	};

	leds {
		compatible = "gpio-leds";

		pwr {
			gpios = <&mcu_pio 0 0>;
			default-state = "on";
		};

		hdd {
			gpios = <&mcu_pio 1 0>;
			linux,default-trigger = "ide-disk";
		};
	};
};
Commit	Line	Data
64ee61bb KP	1	/*
	2	* MPC8315E RDB Device Tree Source
	3	*
	4	* Copyright 2007 Freescale Semiconductor Inc.
	5	*
	6	* This program is free software; you can redistribute it and/or modify it
	7	* under the terms of the GNU General Public License as published by the
	8	* Free Software Foundation; either version 2 of the License, or (at your
	9	* option) any later version.
	10	*/
	11
	12	/dts-v1/;
	13
	14	/ {
	15	compatible = "fsl,mpc8315erdb";
	16	#address-cells = <1>;
	17	#size-cells = <1>;
	18
	19	aliases {
	20	ethernet0 = &enet0;
	21	ethernet1 = &enet1;
	22	serial0 = &serial0;
	23	serial1 = &serial1;
	24	pci0 = &pci0;
0585a155 AV	25	pci1 = &pci1;
0585a155 AV	26	pci2 = &pci2;
64ee61bb KP	27	};
	28
	29	cpus {
	30	#address-cells = <1>;
	31	#size-cells = <0>;
	32
	33	PowerPC,8315@0 {
	34	device_type = "cpu";
cda13dd1	35	reg = <0x0>;
64ee61bb KP	36	d-cache-line-size = <32>;
	37	i-cache-line-size = <32>;
	38	d-cache-size = <16384>;
	39	i-cache-size = <16384>;
	40	timebase-frequency = <0>; // from bootloader
	41	bus-frequency = <0>; // from bootloader
	42	clock-frequency = <0>; // from bootloader
	43	};
	44	};
	45
	46	memory {
	47	device_type = "memory";
	48	reg = <0x00000000 0x08000000>; // 128MB at 0
	49	};
	50
	51	localbus@e0005000 {
	52	#address-cells = <2>;
	53	#size-cells = <1>;
	54	compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
	55	reg = <0xe0005000 0x1000>;
cda13dd1	56	interrupts = <77 0x8>;
64ee61bb KP	57	interrupt-parent = <&ipic>;
	58
	59	// CS0 and CS1 are swapped when
	60	// booting from nand, but the
	61	// addresses are the same.
cda13dd1 PG	62	ranges = <0x0 0x0 0xfe000000 0x00800000
	63	0x1 0x0 0xe0600000 0x00002000
	64	0x2 0x0 0xf0000000 0x00020000
	65	0x3 0x0 0xfa000000 0x00008000>;
64ee61bb KP	66
	67	flash@0,0 {
	68	#address-cells = <1>;
	69	#size-cells = <1>;
	70	compatible = "cfi-flash";
cda13dd1	71	reg = <0x0 0x0 0x800000>;
64ee61bb KP	72	bank-width = <2>;
	73	device-width = <1>;
	74	};
	75
	76	nand@1,0 {
	77	#address-cells = <1>;
	78	#size-cells = <1>;
	79	compatible = "fsl,mpc8315-fcm-nand",
	80	"fsl,elbc-fcm-nand";
cda13dd1	81	reg = <0x1 0x0 0x2000>;
64ee61bb KP	82
	83	u-boot@0 {
	84	reg = <0x0 0x100000>;
	85	read-only;
	86	};
	87
	88	kernel@100000 {
	89	reg = <0x100000 0x300000>;
	90	};
	91	fs@400000 {
	92	reg = <0x400000 0x1c00000>;
	93	};
	94	};
	95	};
	96
	97	immr@e0000000 {
	98	#address-cells = <1>;
	99	#size-cells = <1>;
	100	device_type = "soc";
b74a7e50	101	compatible = "fsl,mpc8315-immr", "simple-bus";
64ee61bb KP	102	ranges = <0 0xe0000000 0x00100000>;
	103	reg = <0xe0000000 0x00000200>;
	104	bus-frequency = <0>;
	105
	106	wdt@200 {
	107	device_type = "watchdog";
	108	compatible = "mpc83xx_wdt";
	109	reg = <0x200 0x100>;
	110	};
	111
	112	i2c@3000 {
	113	#address-cells = <1>;
	114	#size-cells = <0>;
	115	cell-index = <0>;
	116	compatible = "fsl-i2c";
	117	reg = <0x3000 0x100>;
cda13dd1 PG	118	interrupts = <14 0x8>;
cda13dd1 PG	119	interrupt-parent = <&ipic>;
64ee61bb KP	120	dfsrr;
64ee61bb KP	121	rtc@68 {
64ee61bb KP	122	compatible = "dallas,ds1339";
	123	reg = <0x68>;
	124	};
44274698 AV	125
	126	mcu_pio: mcu@a {
	127	#gpio-cells = <2>;
	128	compatible = "fsl,mc9s08qg8-mpc8315erdb",
	129	"fsl,mcu-mpc8349emitx";
	130	reg = <0x0a>;
	131	gpio-controller;
	132	};
64ee61bb KP	133	};
	134
	135	spi@7000 {
	136	cell-index = <0>;
	137	compatible = "fsl,spi";
	138	reg = <0x7000 0x1000>;
cda13dd1 PG	139	interrupts = <16 0x8>;
cda13dd1 PG	140	interrupt-parent = <&ipic>;
64ee61bb KP	141	mode = "cpu";
	142	};
	143
dee80553 KG	144	dma@82a8 {
	145	#address-cells = <1>;
	146	#size-cells = <1>;
	147	compatible = "fsl,mpc8315-dma", "fsl,elo-dma";
	148	reg = <0x82a8 4>;
	149	ranges = <0 0x8100 0x1a8>;
	150	interrupt-parent = <&ipic>;
	151	interrupts = <71 8>;
	152	cell-index = <0>;
	153	dma-channel@0 {
	154	compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
	155	reg = <0 0x80>;
aeb42762	156	cell-index = <0>;
dee80553 KG	157	interrupt-parent = <&ipic>;
	158	interrupts = <71 8>;
	159	};
	160	dma-channel@80 {
	161	compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
	162	reg = <0x80 0x80>;
aeb42762	163	cell-index = <1>;
dee80553 KG	164	interrupt-parent = <&ipic>;
	165	interrupts = <71 8>;
	166	};
	167	dma-channel@100 {
	168	compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
	169	reg = <0x100 0x80>;
aeb42762	170	cell-index = <2>;
dee80553 KG	171	interrupt-parent = <&ipic>;
	172	interrupts = <71 8>;
	173	};
	174	dma-channel@180 {
	175	compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
	176	reg = <0x180 0x28>;
aeb42762	177	cell-index = <3>;
dee80553 KG	178	interrupt-parent = <&ipic>;
	179	interrupts = <71 8>;
	180	};
	181	};
	182
64ee61bb KP	183	usb@23000 {
	184	compatible = "fsl-usb2-dr";
	185	reg = <0x23000 0x1000>;
	186	#address-cells = <1>;
	187	#size-cells = <0>;
cda13dd1 PG	188	interrupt-parent = <&ipic>;
cda13dd1 PG	189	interrupts = <38 0x8>;
64ee61bb KP	190	phy_type = "utmi";
	191	};
	192
64ee61bb	193	enet0: ethernet@24000 {
70b3adbb AV	194	#address-cells = <1>;
70b3adbb AV	195	#size-cells = <1>;
64ee61bb KP	196	cell-index = <0>;
	197	device_type = "network";
	198	model = "eTSEC";
	199	compatible = "gianfar";
	200	reg = <0x24000 0x1000>;
70b3adbb	201	ranges = <0x0 0x24000 0x1000>;
64ee61bb	202	local-mac-address = [ 00 00 00 00 00 00 ];
cda13dd1 PG	203	interrupts = <32 0x8 33 0x8 34 0x8>;
cda13dd1 PG	204	interrupt-parent = <&ipic>;
b31a1d8b	205	tbi-handle = <&tbi0>;
64ee61bb	206	phy-handle = < &phy0 >;
1cad2c87	207	fsl,magic-packet;
70b3adbb AV	208
	209	mdio@520 {
	210	#address-cells = <1>;
	211	#size-cells = <0>;
	212	compatible = "fsl,gianfar-mdio";
	213	reg = <0x520 0x20>;
	214
	215	phy0: ethernet-phy@0 {
	216	interrupt-parent = <&ipic>;
	217	interrupts = <20 0x8>;
	218	reg = <0x0>;
70b3adbb AV	219	};
	220
	221	phy1: ethernet-phy@1 {
	222	interrupt-parent = <&ipic>;
	223	interrupts = <19 0x8>;
	224	reg = <0x1>;
70b3adbb AV	225	};
	226
	227	tbi0: tbi-phy@11 {
	228	reg = <0x11>;
	229	device_type = "tbi-phy";
	230	};
	231	};
64ee61bb KP	232	};
	233
	234	enet1: ethernet@25000 {
70b3adbb AV	235	#address-cells = <1>;
70b3adbb AV	236	#size-cells = <1>;
64ee61bb KP	237	cell-index = <1>;
	238	device_type = "network";
	239	model = "eTSEC";
	240	compatible = "gianfar";
	241	reg = <0x25000 0x1000>;
70b3adbb	242	ranges = <0x0 0x25000 0x1000>;
64ee61bb	243	local-mac-address = [ 00 00 00 00 00 00 ];
cda13dd1 PG	244	interrupts = <35 0x8 36 0x8 37 0x8>;
cda13dd1 PG	245	interrupt-parent = <&ipic>;
b31a1d8b	246	tbi-handle = <&tbi1>;
64ee61bb	247	phy-handle = < &phy1 >;
1cad2c87	248	fsl,magic-packet;
70b3adbb AV	249
	250	mdio@520 {
	251	#address-cells = <1>;
	252	#size-cells = <0>;
	253	compatible = "fsl,gianfar-tbi";
	254	reg = <0x520 0x20>;
	255
	256	tbi1: tbi-phy@11 {
	257	reg = <0x11>;
	258	device_type = "tbi-phy";
	259	};
	260	};
64ee61bb KP	261	};
	262
	263	serial0: serial@4500 {
	264	cell-index = <0>;
	265	device_type = "serial";
f706bed1	266	compatible = "fsl,ns16550", "ns16550";
64ee61bb	267	reg = <0x4500 0x100>;
6c9789de	268	clock-frequency = <133333333>;
cda13dd1 PG	269	interrupts = <9 0x8>;
cda13dd1 PG	270	interrupt-parent = <&ipic>;
64ee61bb KP	271	};
	272
	273	serial1: serial@4600 {
	274	cell-index = <1>;
	275	device_type = "serial";
f706bed1	276	compatible = "fsl,ns16550", "ns16550";
64ee61bb	277	reg = <0x4600 0x100>;
6c9789de	278	clock-frequency = <133333333>;
cda13dd1 PG	279	interrupts = <10 0x8>;
cda13dd1 PG	280	interrupt-parent = <&ipic>;
64ee61bb KP	281	};
	282
	283	crypto@30000 {
3fd44736 KP	284	compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
	285	"fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
	286	"fsl,sec2.0";
64ee61bb	287	reg = <0x30000 0x10000>;
cda13dd1 PG	288	interrupts = <11 0x8>;
cda13dd1 PG	289	interrupt-parent = <&ipic>;
3fd44736 KP	290	fsl,num-channels = <4>;
	291	fsl,channel-fifo-len = <24>;
	292	fsl,exec-units-mask = <0x97c>;
18f397c8	293	fsl,descriptor-types-mask = <0x3a30abf>;
64ee61bb KP	294	};
	295
	296	sata@18000 {
	297	compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
	298	reg = <0x18000 0x1000>;
	299	cell-index = <1>;
cda13dd1 PG	300	interrupts = <44 0x8>;
cda13dd1 PG	301	interrupt-parent = <&ipic>;
64ee61bb KP	302	};
	303
	304	sata@19000 {
	305	compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
	306	reg = <0x19000 0x1000>;
	307	cell-index = <2>;
cda13dd1 PG	308	interrupts = <45 0x8>;
cda13dd1 PG	309	interrupt-parent = <&ipic>;
64ee61bb KP	310	};
64ee61bb KP	311
1cad2c87 AV	312	gtm1: timer@500 {
	313	compatible = "fsl,mpc8315-gtm", "fsl,gtm";
	314	reg = <0x500 0x100>;
	315	interrupts = <90 8 78 8 84 8 72 8>;
	316	interrupt-parent = <&ipic>;
	317	clock-frequency = <133333333>;
	318	};
	319
	320	timer@600 {
	321	compatible = "fsl,mpc8315-gtm", "fsl,gtm";
	322	reg = <0x600 0x100>;
	323	interrupts = <91 8 79 8 85 8 73 8>;
	324	interrupt-parent = <&ipic>;
	325	clock-frequency = <133333333>;
	326	};
	327
64ee61bb KP	328	/* IPIC
	329	* interrupts cell = <intr #, sense>
	330	* sense values match linux IORESOURCE_IRQ_* defines:
	331	* sense == 8: Level, low assertion
	332	* sense == 2: Edge, high-to-low change
	333	*/
	334	ipic: interrupt-controller@700 {
	335	interrupt-controller;
	336	#address-cells = <0>;
	337	#interrupt-cells = <2>;
	338	reg = <0x700 0x100>;
	339	device_type = "ipic";
	340	};
4dc2a6cf	341
	342	ipic-msi@7c0 {
	343	compatible = "fsl,ipic-msi";
	344	reg = <0x7c0 0x40>;
	345	msi-available-ranges = <0 0x100>;
	346	interrupts = <0x43 0x8
	347	0x4 0x8
	348	0x51 0x8
	349	0x52 0x8
	350	0x56 0x8
	351	0x57 0x8
	352	0x58 0x8
	353	0x59 0x8>;
	354	interrupt-parent = < &ipic >;
	355	};
1cad2c87 AV	356
	357	pmc: power@b00 {
	358	compatible = "fsl,mpc8315-pmc", "fsl,mpc8313-pmc",
	359	"fsl,mpc8349-pmc";
	360	reg = <0xb00 0x100 0xa00 0x100>;
	361	interrupts = <80 8>;
	362	interrupt-parent = <&ipic>;
	363	fsl,mpc8313-wakeup-timer = <&gtm1>;
	364	};
64ee61bb KP	365	};
	366
	367	pci0: pci@e0008500 {
cda13dd1	368	interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
64ee61bb KP	369	interrupt-map = <
64ee61bb KP	370	/* IDSEL 0x0E -mini PCI */
cda13dd1 PG	371	0x7000 0x0 0x0 0x1 &ipic 18 0x8
	372	0x7000 0x0 0x0 0x2 &ipic 18 0x8
	373	0x7000 0x0 0x0 0x3 &ipic 18 0x8
	374	0x7000 0x0 0x0 0x4 &ipic 18 0x8
64ee61bb KP	375
64ee61bb KP	376	/* IDSEL 0x0F -mini PCI */
cda13dd1 PG	377	0x7800 0x0 0x0 0x1 &ipic 17 0x8
	378	0x7800 0x0 0x0 0x2 &ipic 17 0x8
	379	0x7800 0x0 0x0 0x3 &ipic 17 0x8
	380	0x7800 0x0 0x0 0x4 &ipic 17 0x8
64ee61bb KP	381
64ee61bb KP	382	/* IDSEL 0x10 - PCI slot */
cda13dd1 PG	383	0x8000 0x0 0x0 0x1 &ipic 48 0x8
	384	0x8000 0x0 0x0 0x2 &ipic 17 0x8
	385	0x8000 0x0 0x0 0x3 &ipic 48 0x8
	386	0x8000 0x0 0x0 0x4 &ipic 17 0x8>;
	387	interrupt-parent = <&ipic>;
	388	interrupts = <66 0x8>;
	389	bus-range = <0x0 0x0>;
64ee61bb KP	390	ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
	391	0x42000000 0 0x80000000 0x80000000 0 0x10000000
	392	0x01000000 0 0x00000000 0xe0300000 0 0x00100000>;
	393	clock-frequency = <66666666>;
	394	#interrupt-cells = <1>;
	395	#size-cells = <2>;
	396	#address-cells = <3>;
5b70a097 JR	397	reg = <0xe0008500 0x100 /* internal registers */
5b70a097 JR	398	0xe0008300 0x8>; /* config space access registers */
64ee61bb KP	399	compatible = "fsl,mpc8349-pci";
	400	device_type = "pci";
	401	};
0585a155 AV	402
	403	pci1: pcie@e0009000 {
	404	#address-cells = <3>;
	405	#size-cells = <2>;
	406	#interrupt-cells = <1>;
	407	device_type = "pci";
	408	compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
	409	reg = <0xe0009000 0x00001000>;
	410	ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
	411	0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
	412	bus-range = <0 255>;
	413	interrupt-map-mask = <0xf800 0 0 7>;
	414	interrupt-map = <0 0 0 1 &ipic 1 8
	415	0 0 0 2 &ipic 1 8
	416	0 0 0 3 &ipic 1 8
	417	0 0 0 4 &ipic 1 8>;
	418	clock-frequency = <0>;
	419
	420	pcie@0 {
	421	#address-cells = <3>;
	422	#size-cells = <2>;
	423	device_type = "pci";
	424	reg = <0 0 0 0 0>;
	425	ranges = <0x02000000 0 0xa0000000
	426	0x02000000 0 0xa0000000
	427	0 0x10000000
	428	0x01000000 0 0x00000000
	429	0x01000000 0 0x00000000
	430	0 0x00800000>;
	431	};
	432	};
	433
	434	pci2: pcie@e000a000 {
	435	#address-cells = <3>;
	436	#size-cells = <2>;
	437	#interrupt-cells = <1>;
	438	device_type = "pci";
	439	compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
	440	reg = <0xe000a000 0x00001000>;
	441	ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000
	442	0x01000000 0 0x00000000 0xd1000000 0 0x00800000>;
	443	bus-range = <0 255>;
	444	interrupt-map-mask = <0xf800 0 0 7>;
	445	interrupt-map = <0 0 0 1 &ipic 2 8
	446	0 0 0 2 &ipic 2 8
	447	0 0 0 3 &ipic 2 8
	448	0 0 0 4 &ipic 2 8>;
	449	clock-frequency = <0>;
	450
	451	pcie@0 {
	452	#address-cells = <3>;
	453	#size-cells = <2>;
	454	device_type = "pci";
	455	reg = <0 0 0 0 0>;
	456	ranges = <0x02000000 0 0xc0000000
	457	0x02000000 0 0xc0000000
	458	0 0x10000000
	459	0x01000000 0 0x00000000
	460	0x01000000 0 0x00000000
	461	0 0x00800000>;
	462	};
	463	};
6971df4f AV	464
	465	leds {
	466	compatible = "gpio-leds";
	467
	468	pwr {
	469	gpios = <&mcu_pio 0 0>;
	470	default-state = "on";
	471	};
	472
	473	hdd {
	474	gpios = <&mcu_pio 1 0>;
	475	linux,default-trigger = "ide-disk";
	476	};
	477	};
64ee61bb	478	};