projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| 23dd1cbf KP |
1 | /* |
| 2 | * MPC8377E RDB Device Tree Source | |
| 3 | * | |
| 4 | * Copyright 2007, 2008 Freescale Semiconductor Inc. | |
| 5 | * | |
| 6 | * This program is free software; you can redistribute it and/or modify it | |
| 7 | * under the terms of the GNU General Public License as published by the | |
| 8 | * Free Software Foundation; either version 2 of the License, or (at your | |
| 9 | * option) any later version. | |
| 10 | */ | |
| 11 | ||
| 12 | /dts-v1/; | |
| 13 | ||
| 14 | / { | |
| 3b29dade | 15 | compatible = "fsl,mpc8377rdb"; |
| 23dd1cbf KP |
16 | #address-cells = <1>; |
| 17 | #size-cells = <1>; | |
| 18 | ||
| 19 | aliases { | |
| 20 | ethernet0 = &enet0; | |
| 21 | ethernet1 = &enet1; | |
| 22 | serial0 = &serial0; | |
| 23 | serial1 = &serial1; | |
| 24 | pci0 = &pci0; | |
| 25 | }; | |
| 26 | ||
| 27 | cpus { | |
| 28 | #address-cells = <1>; | |
| 29 | #size-cells = <0>; | |
| 30 | ||
| 31 | PowerPC,8377@0 { | |
| 32 | device_type = "cpu"; | |
| cda13dd1 | 33 | reg = <0x0>; |
| 23dd1cbf KP |
34 | d-cache-line-size = <32>; |
| 35 | i-cache-line-size = <32>; | |
| 36 | d-cache-size = <32768>; | |
| 37 | i-cache-size = <32768>; | |
| 38 | timebase-frequency = <0>; | |
| 39 | bus-frequency = <0>; | |
| 40 | clock-frequency = <0>; | |
| 41 | }; | |
| 42 | }; | |
| 43 | ||
| 44 | memory { | |
| 45 | device_type = "memory"; | |
| 46 | reg = <0x00000000 0x10000000>; // 256MB at 0 | |
| 47 | }; | |
| 48 | ||
| 49 | localbus@e0005000 { | |
| 50 | #address-cells = <2>; | |
| 51 | #size-cells = <1>; | |
| 52 | compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus"; | |
| 53 | reg = <0xe0005000 0x1000>; | |
| cda13dd1 | 54 | interrupts = <77 0x8>; |
| 23dd1cbf KP |
55 | interrupt-parent = <&ipic>; |
| 56 | ||
| 57 | // CS0 and CS1 are swapped when | |
| 58 | // booting from nand, but the | |
| 59 | // addresses are the same. | |
| cda13dd1 PG |
60 | ranges = <0x0 0x0 0xfe000000 0x00800000 |
| 61 | 0x1 0x0 0xe0600000 0x00008000 | |
| 62 | 0x2 0x0 0xf0000000 0x00020000 | |
| 63 | 0x3 0x0 0xfa000000 0x00008000>; | |
| 23dd1cbf KP |
64 | |
| 65 | flash@0,0 { | |
| 66 | #address-cells = <1>; | |
| 67 | #size-cells = <1>; | |
| 68 | compatible = "cfi-flash"; | |
| cda13dd1 | 69 | reg = <0x0 0x0 0x800000>; |
| 23dd1cbf KP |
70 | bank-width = <2>; |
| 71 | device-width = <1>; | |
| 72 | }; | |
| 73 | ||
| 74 | nand@1,0 { | |
| 75 | #address-cells = <1>; | |
| 76 | #size-cells = <1>; | |
| 77 | compatible = "fsl,mpc8377-fcm-nand", | |
| 78 | "fsl,elbc-fcm-nand"; | |
| cda13dd1 | 79 | reg = <0x1 0x0 0x8000>; |
| 23dd1cbf KP |
80 | |
| 81 | u-boot@0 { | |
| 82 | reg = <0x0 0x100000>; | |
| 83 | read-only; | |
| 84 | }; | |
| 85 | ||
| 86 | kernel@100000 { | |
| 87 | reg = <0x100000 0x300000>; | |
| 88 | }; | |
| 89 | fs@400000 { | |
| 90 | reg = <0x400000 0x1c00000>; | |
| 91 | }; | |
| 92 | }; | |
| 93 | }; | |
| 94 | ||
| 95 | immr@e0000000 { | |
| 96 | #address-cells = <1>; | |
| 97 | #size-cells = <1>; | |
| 98 | device_type = "soc"; | |
| 99 | compatible = "simple-bus"; | |
| cda13dd1 | 100 | ranges = <0x0 0xe0000000 0x00100000>; |
| 23dd1cbf KP |
101 | reg = <0xe0000000 0x00000200>; |
| 102 | bus-frequency = <0>; | |
| 103 | ||
| 104 | wdt@200 { | |
| 105 | device_type = "watchdog"; | |
| 106 | compatible = "mpc83xx_wdt"; | |
| 107 | reg = <0x200 0x100>; | |
| 108 | }; | |
| 109 | ||
| 110 | i2c@3000 { | |
| 111 | #address-cells = <1>; | |
| 112 | #size-cells = <0>; | |
| 113 | cell-index = <0>; | |
| 114 | compatible = "fsl-i2c"; | |
| 115 | reg = <0x3000 0x100>; | |
| cda13dd1 PG |
116 | interrupts = <14 0x8>; |
| 117 | interrupt-parent = <&ipic>; | |
| 23dd1cbf KP |
118 | dfsrr; |
| 119 | rtc@68 { | |
| 120 | device_type = "rtc"; | |
| 121 | compatible = "dallas,ds1339"; | |
| 122 | reg = <0x68>; | |
| 123 | }; | |
| 124 | }; | |
| 125 | ||
| 126 | i2c@3100 { | |
| 127 | #address-cells = <1>; | |
| 128 | #size-cells = <0>; | |
| 129 | cell-index = <1>; | |
| 130 | compatible = "fsl-i2c"; | |
| 131 | reg = <0x3100 0x100>; | |
| cda13dd1 PG |
132 | interrupts = <15 0x8>; |
| 133 | interrupt-parent = <&ipic>; | |
| 23dd1cbf KP |
134 | dfsrr; |
| 135 | }; | |
| 136 | ||
| 137 | spi@7000 { | |
| 138 | cell-index = <0>; | |
| 139 | compatible = "fsl,spi"; | |
| 140 | reg = <0x7000 0x1000>; | |
| cda13dd1 PG |
141 | interrupts = <16 0x8>; |
| 142 | interrupt-parent = <&ipic>; | |
| 23dd1cbf KP |
143 | mode = "cpu"; |
| 144 | }; | |
| 145 | ||
| 146 | /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ | |
| 147 | usb@23000 { | |
| 148 | compatible = "fsl-usb2-dr"; | |
| 149 | reg = <0x23000 0x1000>; | |
| 150 | #address-cells = <1>; | |
| 151 | #size-cells = <0>; | |
| cda13dd1 PG |
152 | interrupt-parent = <&ipic>; |
| 153 | interrupts = <38 0x8>; | |
| 23dd1cbf KP |
154 | phy_type = "utmi"; |
| 155 | }; | |
| 156 | ||
| 157 | mdio@24520 { | |
| 158 | #address-cells = <1>; | |
| 159 | #size-cells = <0>; | |
| 160 | compatible = "fsl,gianfar-mdio"; | |
| 161 | reg = <0x24520 0x20>; | |
| 162 | phy2: ethernet-phy@2 { | |
| cda13dd1 PG |
163 | interrupt-parent = <&ipic>; |
| 164 | interrupts = <17 0x8>; | |
| 165 | reg = <0x2>; | |
| 23dd1cbf KP |
166 | device_type = "ethernet-phy"; |
| 167 | }; | |
| 168 | phy3: ethernet-phy@3 { | |
| cda13dd1 PG |
169 | interrupt-parent = <&ipic>; |
| 170 | interrupts = <18 0x8>; | |
| 171 | reg = <0x3>; | |
| 23dd1cbf KP |
172 | device_type = "ethernet-phy"; |
| 173 | }; | |
| 174 | }; | |
| 175 | ||
| 176 | enet0: ethernet@24000 { | |
| 177 | cell-index = <0>; | |
| 178 | device_type = "network"; | |
| 179 | model = "eTSEC"; | |
| 180 | compatible = "gianfar"; | |
| 181 | reg = <0x24000 0x1000>; | |
| 182 | local-mac-address = [ 00 00 00 00 00 00 ]; | |
| cda13dd1 | 183 | interrupts = <32 0x8 33 0x8 34 0x8>; |
| 23dd1cbf | 184 | phy-connection-type = "mii"; |
| cda13dd1 PG |
185 | interrupt-parent = <&ipic>; |
| 186 | phy-handle = <&phy2>; | |
| 23dd1cbf KP |
187 | }; |
| 188 | ||
| 189 | enet1: ethernet@25000 { | |
| 190 | cell-index = <1>; | |
| 191 | device_type = "network"; | |
| 192 | model = "eTSEC"; | |
| 193 | compatible = "gianfar"; | |
| 194 | reg = <0x25000 0x1000>; | |
| 195 | local-mac-address = [ 00 00 00 00 00 00 ]; | |
| cda13dd1 | 196 | interrupts = <35 0x8 36 0x8 37 0x8>; |
| 23dd1cbf | 197 | phy-connection-type = "mii"; |
| cda13dd1 PG |
198 | interrupt-parent = <&ipic>; |
| 199 | phy-handle = <&phy3>; | |
| 23dd1cbf KP |
200 | }; |
| 201 | ||
| 202 | serial0: serial@4500 { | |
| 203 | cell-index = <0>; | |
| 204 | device_type = "serial"; | |
| 205 | compatible = "ns16550"; | |
| 206 | reg = <0x4500 0x100>; | |
| 207 | clock-frequency = <0>; | |
| cda13dd1 PG |
208 | interrupts = <9 0x8>; |
| 209 | interrupt-parent = <&ipic>; | |
| 23dd1cbf KP |
210 | }; |
| 211 | ||
| 212 | serial1: serial@4600 { | |
| 213 | cell-index = <1>; | |
| 214 | device_type = "serial"; | |
| 215 | compatible = "ns16550"; | |
| 216 | reg = <0x4600 0x100>; | |
| 217 | clock-frequency = <0>; | |
| cda13dd1 PG |
218 | interrupts = <10 0x8>; |
| 219 | interrupt-parent = <&ipic>; | |
| 23dd1cbf KP |
220 | }; |
| 221 | ||
| 222 | crypto@30000 { | |
| 223 | model = "SEC3"; | |
| 224 | device_type = "crypto"; | |
| 225 | compatible = "talitos"; | |
| 226 | reg = <0x30000 0x10000>; | |
| cda13dd1 PG |
227 | interrupts = <11 0x8>; |
| 228 | interrupt-parent = <&ipic>; | |
| 23dd1cbf KP |
229 | /* Rev. 3.0 geometry */ |
| 230 | num-channels = <4>; | |
| 231 | channel-fifo-len = <24>; | |
| 232 | exec-units-mask = <0x000001fe>; | |
| 233 | descriptor-types-mask = <0x03ab0ebf>; | |
| 234 | }; | |
| 235 | ||
| 236 | sata@18000 { | |
| 237 | compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; | |
| 238 | reg = <0x18000 0x1000>; | |
| cda13dd1 PG |
239 | interrupts = <44 0x8>; |
| 240 | interrupt-parent = <&ipic>; | |
| 23dd1cbf KP |
241 | }; |
| 242 | ||
| 243 | sata@19000 { | |
| 244 | compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; | |
| 245 | reg = <0x19000 0x1000>; | |
| cda13dd1 PG |
246 | interrupts = <45 0x8>; |
| 247 | interrupt-parent = <&ipic>; | |
| 23dd1cbf KP |
248 | }; |
| 249 | ||
| 250 | /* IPIC | |
| 251 | * interrupts cell = <intr #, sense> | |
| 252 | * sense values match linux IORESOURCE_IRQ_* defines: | |
| 253 | * sense == 8: Level, low assertion | |
| 254 | * sense == 2: Edge, high-to-low change | |
| 255 | */ | |
| 256 | ipic: interrupt-controller@700 { | |
| 257 | compatible = "fsl,ipic"; | |
| 258 | interrupt-controller; | |
| 259 | #address-cells = <0>; | |
| 260 | #interrupt-cells = <2>; | |
| 261 | reg = <0x700 0x100>; | |
| 262 | }; | |
| 263 | }; | |
| 264 | ||
| 265 | pci0: pci@e0008500 { | |
| 266 | interrupt-map-mask = <0xf800 0 0 7>; | |
| 267 | interrupt-map = < | |
| 268 | /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ | |
| 269 | ||
| 270 | /* IDSEL AD14 IRQ6 inta */ | |
| cda13dd1 | 271 | 0x7000 0x0 0x0 0x1 &ipic 22 0x8 |
| 23dd1cbf KP |
272 | |
| 273 | /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */ | |
| cda13dd1 PG |
274 | 0x7800 0x0 0x0 0x1 &ipic 21 0x8 |
| 275 | 0x7800 0x0 0x0 0x2 &ipic 22 0x8 | |
| 276 | 0x7800 0x0 0x0 0x4 &ipic 23 0x8 | |
| 23dd1cbf KP |
277 | |
| 278 | /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/ | |
| cda13dd1 PG |
279 | 0xE000 0x0 0x0 0x1 &ipic 23 0x8 |
| 280 | 0xE000 0x0 0x0 0x2 &ipic 21 0x8 | |
| 281 | 0xE000 0x0 0x0 0x3 &ipic 22 0x8>; | |
| 282 | interrupt-parent = <&ipic>; | |
| 283 | interrupts = <66 0x8>; | |
| 23dd1cbf | 284 | bus-range = <0 0>; |
| cda13dd1 PG |
285 | ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 |
| 286 | 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 | |
| 287 | 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; | |
| 23dd1cbf KP |
288 | clock-frequency = <66666666>; |
| 289 | #interrupt-cells = <1>; | |
| 290 | #size-cells = <2>; | |
| 291 | #address-cells = <3>; | |
| 292 | reg = <0xe0008500 0x100>; | |
| 293 | compatible = "fsl,mpc8349-pci"; | |
| 294 | device_type = "pci"; | |
| 295 | }; | |
| 296 | }; |