powerpc/booke: Add kprobes support for booke style processors
[deliverable/linux.git] / arch / powerpc / boot / dts / mpc8379_mds.dts
CommitLineData
5761bc5d
LY
1/*
2 * MPC8379E MDS Device Tree Source
3 *
4 * Copyright 2007 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 */
11
12/dts-v1/;
13
14/ {
15 model = "fsl,mpc8379emds";
16 compatible = "fsl,mpc8379emds","fsl,mpc837xmds";
17 #address-cells = <1>;
18 #size-cells = <1>;
19
20 aliases {
21 ethernet0 = &enet0;
22 ethernet1 = &enet1;
23 serial0 = &serial0;
24 serial1 = &serial1;
25 pci0 = &pci0;
26 };
27
28 cpus {
29 #address-cells = <1>;
30 #size-cells = <0>;
31
32 PowerPC,8379@0 {
33 device_type = "cpu";
cda13dd1
PG
34 reg = <0x0>;
35 d-cache-line-size = <32>;
36 i-cache-line-size = <32>;
37 d-cache-size = <32768>;
38 i-cache-size = <32768>;
5761bc5d
LY
39 timebase-frequency = <0>;
40 bus-frequency = <0>;
41 clock-frequency = <0>;
42 };
43 };
44
45 memory {
46 device_type = "memory";
47 reg = <0x00000000 0x20000000>; // 512MB at 0
48 };
49
d7f46190
LY
50 localbus@e0005000 {
51 #address-cells = <2>;
52 #size-cells = <1>;
53 compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
54 reg = <0xe0005000 0x1000>;
55 interrupts = <77 0x8>;
56 interrupt-parent = <&ipic>;
57
58 // booting from NOR flash
59 ranges = <0 0x0 0xfe000000 0x02000000
60 1 0x0 0xf8000000 0x00008000
61 3 0x0 0xe0600000 0x00008000>;
62
63 flash@0,0 {
64 #address-cells = <1>;
65 #size-cells = <1>;
66 compatible = "cfi-flash";
67 reg = <0 0x0 0x2000000>;
68 bank-width = <2>;
69 device-width = <1>;
70
71 u-boot@0 {
72 reg = <0x0 0x100000>;
73 read-only;
74 };
75
76 fs@100000 {
77 reg = <0x100000 0x800000>;
78 };
79
80 kernel@1d00000 {
81 reg = <0x1d00000 0x200000>;
82 };
83
84 dtb@1f00000 {
85 reg = <0x1f00000 0x100000>;
86 };
87 };
88
89 bcsr@1,0 {
90 reg = <1 0x0 0x8000>;
91 compatible = "fsl,mpc837xmds-bcsr";
92 };
93
94 nand@3,0 {
95 #address-cells = <1>;
96 #size-cells = <1>;
97 compatible = "fsl,mpc8379-fcm-nand",
98 "fsl,elbc-fcm-nand";
99 reg = <3 0x0 0x8000>;
100
101 u-boot@0 {
102 reg = <0x0 0x100000>;
103 read-only;
104 };
105
106 kernel@100000 {
107 reg = <0x100000 0x300000>;
108 };
109
110 fs@400000 {
111 reg = <0x400000 0x1c00000>;
112 };
113 };
114 };
115
5761bc5d
LY
116 soc@e0000000 {
117 #address-cells = <1>;
118 #size-cells = <1>;
119 device_type = "soc";
120 ranges = <0x0 0xe0000000 0x00100000>;
121 reg = <0xe0000000 0x00000200>;
122 bus-frequency = <0>;
123
124 wdt@200 {
125 compatible = "mpc83xx_wdt";
126 reg = <0x200 0x100>;
127 };
128
129 i2c@3000 {
130 #address-cells = <1>;
131 #size-cells = <0>;
132 cell-index = <0>;
133 compatible = "fsl-i2c";
134 reg = <0x3000 0x100>;
cda13dd1
PG
135 interrupts = <14 0x8>;
136 interrupt-parent = <&ipic>;
5761bc5d
LY
137 dfsrr;
138 };
139
140 i2c@3100 {
141 #address-cells = <1>;
142 #size-cells = <0>;
143 cell-index = <1>;
144 compatible = "fsl-i2c";
145 reg = <0x3100 0x100>;
cda13dd1
PG
146 interrupts = <15 0x8>;
147 interrupt-parent = <&ipic>;
5761bc5d
LY
148 dfsrr;
149 };
150
151 spi@7000 {
f3a2b29d
AV
152 cell-index = <0>;
153 compatible = "fsl,spi";
5761bc5d 154 reg = <0x7000 0x1000>;
cda13dd1
PG
155 interrupts = <16 0x8>;
156 interrupt-parent = <&ipic>;
5761bc5d
LY
157 mode = "cpu";
158 };
159
5761bc5d
LY
160 usb@23000 {
161 compatible = "fsl-usb2-dr";
162 reg = <0x23000 0x1000>;
163 #address-cells = <1>;
164 #size-cells = <0>;
cda13dd1
PG
165 interrupt-parent = <&ipic>;
166 interrupts = <38 0x8>;
28b95885
LY
167 dr_mode = "host";
168 phy_type = "ulpi";
5761bc5d
LY
169 };
170
171 mdio@24520 {
172 #address-cells = <1>;
173 #size-cells = <0>;
174 compatible = "fsl,gianfar-mdio";
175 reg = <0x24520 0x20>;
176 phy2: ethernet-phy@2 {
cda13dd1
PG
177 interrupt-parent = <&ipic>;
178 interrupts = <17 0x8>;
179 reg = <0x2>;
5761bc5d
LY
180 device_type = "ethernet-phy";
181 };
182 phy3: ethernet-phy@3 {
cda13dd1
PG
183 interrupt-parent = <&ipic>;
184 interrupts = <18 0x8>;
185 reg = <0x3>;
5761bc5d
LY
186 device_type = "ethernet-phy";
187 };
188 };
189
190 enet0: ethernet@24000 {
191 cell-index = <0>;
192 device_type = "network";
193 model = "eTSEC";
194 compatible = "gianfar";
195 reg = <0x24000 0x1000>;
196 local-mac-address = [ 00 00 00 00 00 00 ];
cda13dd1 197 interrupts = <32 0x8 33 0x8 34 0x8>;
5761bc5d 198 phy-connection-type = "mii";
cda13dd1
PG
199 interrupt-parent = <&ipic>;
200 phy-handle = <&phy2>;
5761bc5d
LY
201 };
202
203 enet1: ethernet@25000 {
204 cell-index = <1>;
205 device_type = "network";
206 model = "eTSEC";
207 compatible = "gianfar";
208 reg = <0x25000 0x1000>;
209 local-mac-address = [ 00 00 00 00 00 00 ];
cda13dd1 210 interrupts = <35 0x8 36 0x8 37 0x8>;
5761bc5d 211 phy-connection-type = "mii";
cda13dd1
PG
212 interrupt-parent = <&ipic>;
213 phy-handle = <&phy3>;
5761bc5d
LY
214 };
215
216 serial0: serial@4500 {
217 cell-index = <0>;
218 device_type = "serial";
219 compatible = "ns16550";
220 reg = <0x4500 0x100>;
221 clock-frequency = <0>;
cda13dd1
PG
222 interrupts = <9 0x8>;
223 interrupt-parent = <&ipic>;
5761bc5d
LY
224 };
225
226 serial1: serial@4600 {
227 cell-index = <1>;
228 device_type = "serial";
229 compatible = "ns16550";
230 reg = <0x4600 0x100>;
231 clock-frequency = <0>;
cda13dd1
PG
232 interrupts = <10 0x8>;
233 interrupt-parent = <&ipic>;
5761bc5d
LY
234 };
235
236 crypto@30000 {
237 model = "SEC3";
238 compatible = "talitos";
239 reg = <0x30000 0x10000>;
cda13dd1
PG
240 interrupts = <11 0x8>;
241 interrupt-parent = <&ipic>;
5761bc5d
LY
242 /* Rev. 3.0 geometry */
243 num-channels = <4>;
cda13dd1 244 channel-fifo-len = <24>;
5761bc5d
LY
245 exec-units-mask = <0x000001fe>;
246 descriptor-types-mask = <0x03ab0ebf>;
247 };
248
249 sdhc@2e000 {
250 model = "eSDHC";
251 compatible = "fsl,esdhc";
252 reg = <0x2e000 0x1000>;
cda13dd1
PG
253 interrupts = <42 0x8>;
254 interrupt-parent = <&ipic>;
5761bc5d
LY
255 };
256
257 sata@18000 {
96ce1b6d 258 compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
5761bc5d 259 reg = <0x18000 0x1000>;
cda13dd1
PG
260 interrupts = <44 0x8>;
261 interrupt-parent = <&ipic>;
5761bc5d
LY
262 };
263
264 sata@19000 {
96ce1b6d 265 compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
5761bc5d 266 reg = <0x19000 0x1000>;
cda13dd1
PG
267 interrupts = <45 0x8>;
268 interrupt-parent = <&ipic>;
5761bc5d
LY
269 };
270
271 sata@1a000 {
96ce1b6d 272 compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
5761bc5d 273 reg = <0x1a000 0x1000>;
cda13dd1
PG
274 interrupts = <46 0x8>;
275 interrupt-parent = <&ipic>;
5761bc5d
LY
276 };
277
278 sata@1b000 {
96ce1b6d 279 compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
5761bc5d 280 reg = <0x1b000 0x1000>;
cda13dd1
PG
281 interrupts = <47 0x8>;
282 interrupt-parent = <&ipic>;
5761bc5d
LY
283 };
284
285 /* IPIC
286 * interrupts cell = <intr #, sense>
287 * sense values match linux IORESOURCE_IRQ_* defines:
288 * sense == 8: Level, low assertion
289 * sense == 2: Edge, high-to-low change
290 */
291 ipic: pic@700 {
292 compatible = "fsl,ipic";
293 interrupt-controller;
294 #address-cells = <0>;
295 #interrupt-cells = <2>;
296 reg = <0x700 0x100>;
297 };
298 };
299
300 pci0: pci@e0008500 {
301 cell-index = <0>;
302 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
303 interrupt-map = <
304
305 /* IDSEL 0x11 */
cda13dd1
PG
306 0x8800 0x0 0x0 0x1 &ipic 20 0x8
307 0x8800 0x0 0x0 0x2 &ipic 21 0x8
308 0x8800 0x0 0x0 0x3 &ipic 22 0x8
309 0x8800 0x0 0x0 0x4 &ipic 23 0x8
5761bc5d
LY
310
311 /* IDSEL 0x12 */
cda13dd1
PG
312 0x9000 0x0 0x0 0x1 &ipic 22 0x8
313 0x9000 0x0 0x0 0x2 &ipic 23 0x8
314 0x9000 0x0 0x0 0x3 &ipic 20 0x8
315 0x9000 0x0 0x0 0x4 &ipic 21 0x8
5761bc5d
LY
316
317 /* IDSEL 0x13 */
cda13dd1
PG
318 0x9800 0x0 0x0 0x1 &ipic 23 0x8
319 0x9800 0x0 0x0 0x2 &ipic 20 0x8
320 0x9800 0x0 0x0 0x3 &ipic 21 0x8
321 0x9800 0x0 0x0 0x4 &ipic 22 0x8
5761bc5d
LY
322
323 /* IDSEL 0x15 */
cda13dd1
PG
324 0xa800 0x0 0x0 0x1 &ipic 20 0x8
325 0xa800 0x0 0x0 0x2 &ipic 21 0x8
326 0xa800 0x0 0x0 0x3 &ipic 22 0x8
327 0xa800 0x0 0x0 0x4 &ipic 23 0x8
5761bc5d
LY
328
329 /* IDSEL 0x16 */
cda13dd1
PG
330 0xb000 0x0 0x0 0x1 &ipic 23 0x8
331 0xb000 0x0 0x0 0x2 &ipic 20 0x8
332 0xb000 0x0 0x0 0x3 &ipic 21 0x8
333 0xb000 0x0 0x0 0x4 &ipic 22 0x8
5761bc5d
LY
334
335 /* IDSEL 0x17 */
cda13dd1
PG
336 0xb800 0x0 0x0 0x1 &ipic 22 0x8
337 0xb800 0x0 0x0 0x2 &ipic 23 0x8
338 0xb800 0x0 0x0 0x3 &ipic 20 0x8
339 0xb800 0x0 0x0 0x4 &ipic 21 0x8
5761bc5d
LY
340
341 /* IDSEL 0x18 */
cda13dd1
PG
342 0xc000 0x0 0x0 0x1 &ipic 21 0x8
343 0xc000 0x0 0x0 0x2 &ipic 22 0x8
344 0xc000 0x0 0x0 0x3 &ipic 23 0x8
345 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
346 interrupt-parent = <&ipic>;
347 interrupts = <66 0x8>;
348 bus-range = <0x0 0x0>;
5761bc5d
LY
349 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
350 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
351 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
352 clock-frequency = <0>;
353 #interrupt-cells = <1>;
354 #size-cells = <2>;
355 #address-cells = <3>;
356 reg = <0xe0008500 0x100>;
357 compatible = "fsl,mpc8349-pci";
358 device_type = "pci";
359 };
360};
This page took 0.084493 seconds and 5 git commands to generate.