projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
powerpc: Merge xmon
[deliverable/linux.git] / arch / powerpc / kernel / head_32.S
CommitLineData
14cf11af
PM		 1/*
2 * PowerPC version
3 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
4 *
5 * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
6 * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
7 * Adapted for Power Macintosh by Paul Mackerras.
8 * Low-level exception handlers and MMU support
9 * rewritten by Paul Mackerras.
10 * Copyright (C) 1996 Paul Mackerras.
11 * MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
12 * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
13 *
14 * This file contains the low-level support and setup for the
15 * PowerPC platform, including trap and interrupt dispatch.
16 * (The PPC 8xx embedded CPUs use head_8xx.S instead.)
17 *
18 * This program is free software; you can redistribute it and/or
19 * modify it under the terms of the GNU General Public License
20 * as published by the Free Software Foundation; either version
21 * 2 of the License, or (at your option) any later version.
22 *
23 */
24
25#include <linux/config.h>
b3b8dc6c 26#include <asm/reg.h>
14cf11af
PM		 27#include <asm/page.h>
28#include <asm/mmu.h>
29#include <asm/pgtable.h>
30#include <asm/cputable.h>
31#include <asm/cache.h>
32#include <asm/thread_info.h>
33#include <asm/ppc_asm.h>
34#include <asm/asm-offsets.h>
35
36#ifdef CONFIG_APUS
37#include <asm/amigappc.h>
38#endif
39
14cf11af
PM		 40/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
41#define LOAD_BAT(n, reg, RA, RB) \
42 /* see the comment for clear_bats() -- Cort */ \
43 li RA,0; \
44 mtspr SPRN_IBAT##n##U,RA; \
45 mtspr SPRN_DBAT##n##U,RA; \
46 lwz RA,(n*16)+0(reg); \
47 lwz RB,(n*16)+4(reg); \
48 mtspr SPRN_IBAT##n##U,RA; \
49 mtspr SPRN_IBAT##n##L,RB; \
50 beq 1f; \
51 lwz RA,(n*16)+8(reg); \
52 lwz RB,(n*16)+12(reg); \
53 mtspr SPRN_DBAT##n##U,RA; \
54 mtspr SPRN_DBAT##n##L,RB; \
551:
14cf11af
PM		 56
57 .text
b3b8dc6c
PM		 58 .stabs "arch/powerpc/kernel/",N_SO,0,0,0f
59 .stabs "head_32.S",N_SO,0,0,0f
14cf11af
PM		 600:
61 .globl _stext
62_stext:
63
64/*
65 * _start is defined this way because the XCOFF loader in the OpenFirmware
66 * on the powermac expects the entry point to be a procedure descriptor.
67 */
68 .text
69 .globl _start
70_start:
71 /*
72 * These are here for legacy reasons, the kernel used to
73 * need to look like a coff function entry for the pmac
74 * but we're always started by some kind of bootloader now.
75 * -- Cort
76 */
77 nop /* used by __secondary_hold on prep (mtx) and chrp smp */
78 nop /* used by __secondary_hold on prep (mtx) and chrp smp */
79 nop
80
81/* PMAC
82 * Enter here with the kernel text, data and bss loaded starting at
83 * 0, running with virtual == physical mapping.
84 * r5 points to the prom entry point (the client interface handler
85 * address). Address translation is turned on, with the prom
86 * managing the hash table. Interrupts are disabled. The stack
87 * pointer (r1) points to just below the end of the half-meg region
88 * from 0x380000 - 0x400000, which is mapped in already.
89 *
90 * If we are booted from MacOS via BootX, we enter with the kernel
91 * image loaded somewhere, and the following values in registers:
92 * r3: 'BooX' (0x426f6f58)
93 * r4: virtual address of boot_infos_t
94 * r5: 0
95 *
96 * APUS
97 * r3: 'APUS'
98 * r4: physical address of memory base
99 * Linux/m68k style BootInfo structure at &_end.
100 *
101 * PREP
102 * This is jumped to on prep systems right after the kernel is relocated
103 * to its proper place in memory by the boot loader. The expected layout
104 * of the regs is:
105 * r3: ptr to residual data
106 * r4: initrd_start or if no initrd then 0
107 * r5: initrd_end - unused if r4 is 0
108 * r6: Start of command line string
109 * r7: End of command line string
110 *
111 * This just gets a minimal mmu environment setup so we can call
112 * start_here() to do the real work.
113 * -- Cort
114 */
115
116 .globl __start
117__start:
118/*
119 * We have to do any OF calls before we map ourselves to KERNELBASE,
120 * because OF may have I/O devices mapped into that area
121 * (particularly on CHRP).
122 */
9b6b563c
PM		 123 cmpwi 0,r5,0
124 beq 1f
125 bl prom_init
126 trap
127
1281: mr r31,r3 /* save parameters */
14cf11af 129 mr r30,r4
14cf11af
PM		 130 li r24,0 /* cpu # */
131
132/*
133 * early_init() does the early machine identification and does
134 * the necessary low-level setup and clears the BSS
135 * -- Cort <cort@fsmlabs.com>
136 */
137 bl early_init
138
14cf11af
PM		 139#ifdef CONFIG_APUS
140/* On APUS the __va/__pa constants need to be set to the correct
141 * values before continuing.
142 */
143 mr r4,r30
144 bl fix_mem_constants
145#endif /* CONFIG_APUS */
146
147/* Switch MMU off, clear BATs and flush TLB. At this point, r3 contains
148 * the physical address we are running at, returned by early_init()
149 */
150 bl mmu_off
151__after_mmu_off:
14cf11af
PM		 152 bl clear_bats
153 bl flush_tlbs
154
155 bl initial_bats
14cf11af
PM		 156
157/*
158 * Call setup_cpu for CPU 0 and initialize 6xx Idle
159 */
160 bl reloc_offset
161 li r24,0 /* cpu# */
162 bl call_setup_cpu /* Call setup_cpu for this CPU */
163#ifdef CONFIG_6xx
164 bl reloc_offset
165 bl init_idle_6xx
166#endif /* CONFIG_6xx */
14cf11af
PM		 167
168
169#ifndef CONFIG_APUS
170/*
171 * We need to run with _start at physical address 0.
172 * On CHRP, we are loaded at 0x10000 since OF on CHRP uses
173 * the exception vectors at 0 (and therefore this copy
174 * overwrites OF's exception vectors with our own).
9b6b563c 175 * The MMU is off at this point.
14cf11af
PM		 176 */
177 bl reloc_offset
178 mr r26,r3
179 addis r4,r3,KERNELBASE@h /* current address of _start */
180 cmpwi 0,r4,0 /* are we already running at 0? */
181 bne relocate_kernel
182#endif /* CONFIG_APUS */
183/*
184 * we now have the 1st 16M of ram mapped with the bats.
185 * prep needs the mmu to be turned on here, but pmac already has it on.
186 * this shouldn't bother the pmac since it just gets turned on again
187 * as we jump to our code at KERNELBASE. -- Cort
188 * Actually no, pmac doesn't have it on any more. BootX enters with MMU
189 * off, and in other cases, we now turn it off before changing BATs above.
190 */
191turn_on_mmu:
192 mfmsr r0
193 ori r0,r0,MSR_DR|MSR_IR
194 mtspr SPRN_SRR1,r0
195 lis r0,start_here@h
196 ori r0,r0,start_here@l
197 mtspr SPRN_SRR0,r0
198 SYNC
199 RFI /* enables MMU */
200
201/*
202 * We need __secondary_hold as a place to hold the other cpus on
203 * an SMP machine, even when we are running a UP kernel.
204 */
205 . = 0xc0 /* for prep bootloader */
206 li r3,1 /* MTX only has 1 cpu */
207 .globl __secondary_hold
208__secondary_hold:
209 /* tell the master we're here */
bbd0abda 210 stw r3,__secondary_hold_acknowledge@l(0)
14cf11af
PM		 211#ifdef CONFIG_SMP
212100: lwz r4,0(0)
213 /* wait until we're told to start */
214 cmpw 0,r4,r3
215 bne 100b
216 /* our cpu # was at addr 0 - go */
217 mr r24,r3 /* cpu # */
218 b __secondary_start
219#else
220 b .
221#endif /* CONFIG_SMP */
222
bbd0abda
PM		 223 .globl __secondary_hold_spinloop
224__secondary_hold_spinloop:
225 .long 0
226 .globl __secondary_hold_acknowledge
227__secondary_hold_acknowledge:
228 .long -1
229
14cf11af
PM		 230/*
231 * Exception entry code. This code runs with address translation
232 * turned off, i.e. using physical addresses.
233 * We assume sprg3 has the physical address of the current
234 * task's thread_struct.
235 */
236#define EXCEPTION_PROLOG \
237 mtspr SPRN_SPRG0,r10; \
238 mtspr SPRN_SPRG1,r11; \
239 mfcr r10; \
240 EXCEPTION_PROLOG_1; \
241 EXCEPTION_PROLOG_2
242
243#define EXCEPTION_PROLOG_1 \
244 mfspr r11,SPRN_SRR1; /* check whether user or kernel */ \
245 andi. r11,r11,MSR_PR; \
246 tophys(r11,r1); /* use tophys(r1) if kernel */ \
247 beq 1f; \
248 mfspr r11,SPRN_SPRG3; \
249 lwz r11,THREAD_INFO-THREAD(r11); \
250 addi r11,r11,THREAD_SIZE; \
251 tophys(r11,r11); \
2521: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */
253
254
255#define EXCEPTION_PROLOG_2 \
256 CLR_TOP32(r11); \
257 stw r10,_CCR(r11); /* save registers */ \
258 stw r12,GPR12(r11); \
259 stw r9,GPR9(r11); \
260 mfspr r10,SPRN_SPRG0; \
261 stw r10,GPR10(r11); \
262 mfspr r12,SPRN_SPRG1; \
263 stw r12,GPR11(r11); \
264 mflr r10; \
265 stw r10,_LINK(r11); \
266 mfspr r12,SPRN_SRR0; \
267 mfspr r9,SPRN_SRR1; \
268 stw r1,GPR1(r11); \
269 stw r1,0(r11); \
270 tovirt(r1,r11); /* set new kernel sp */ \
271 li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
272 MTMSRD(r10); /* (except for mach check in rtas) */ \
273 stw r0,GPR0(r11); \
f78541dc
PM		 274 lis r10,0x7265; /* put exception frame marker */ \
275 addi r10,r10,0x6773; \
276 stw r10,8(r11); \
14cf11af
PM		 277 SAVE_4GPRS(3, r11); \
278 SAVE_2GPRS(7, r11)
279
280/*
281 * Note: code which follows this uses cr0.eq (set if from kernel),
282 * r11, r12 (SRR0), and r9 (SRR1).
283 *
284 * Note2: once we have set r1 we are in a position to take exceptions
285 * again, and we could thus set MSR:RI at that point.
286 */
287
288/*
289 * Exception vectors.
290 */
291#define EXCEPTION(n, label, hdlr, xfer) \
292 . = n; \
293label: \
294 EXCEPTION_PROLOG; \
295 addi r3,r1,STACK_FRAME_OVERHEAD; \
296 xfer(n, hdlr)
297
298#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret) \
299 li r10,trap; \
d73e0c99 300 stw r10,_TRAP(r11); \
14cf11af
PM		 301 li r10,MSR_KERNEL; \
302 copyee(r10, r9); \
303 bl tfer; \
304i##n: \
305 .long hdlr; \
306 .long ret
307
308#define COPY_EE(d, s) rlwimi d,s,0,16,16
309#define NOCOPY(d, s)
310
311#define EXC_XFER_STD(n, hdlr) \
312 EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full, \
313 ret_from_except_full)
314
315#define EXC_XFER_LITE(n, hdlr) \
316 EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
317 ret_from_except)
318
319#define EXC_XFER_EE(n, hdlr) \
320 EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
321 ret_from_except_full)
322
323#define EXC_XFER_EE_LITE(n, hdlr) \
324 EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
325 ret_from_except)
326
327/* System reset */
328/* core99 pmac starts the seconary here by changing the vector, and
dc1c1ca3 329 putting it back to what it was (unknown_exception) when done. */
14cf11af
PM		 330#if defined(CONFIG_GEMINI) && defined(CONFIG_SMP)
331 . = 0x100
332 b __secondary_start_gemini
333#else
dc1c1ca3 334 EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD)
14cf11af
PM		 335#endif
336
337/* Machine check */
338/*
339 * On CHRP, this is complicated by the fact that we could get a
340 * machine check inside RTAS, and we have no guarantee that certain
341 * critical registers will have the values we expect. The set of
342 * registers that might have bad values includes all the GPRs
343 * and all the BATs. We indicate that we are in RTAS by putting
344 * a non-zero value, the address of the exception frame to use,
345 * in SPRG2. The machine check handler checks SPRG2 and uses its
346 * value if it is non-zero. If we ever needed to free up SPRG2,
347 * we could use a field in the thread_info or thread_struct instead.
348 * (Other exception handlers assume that r1 is a valid kernel stack
349 * pointer when we take an exception from supervisor mode.)
350 * -- paulus.
351 */
352 . = 0x200
353 mtspr SPRN_SPRG0,r10
354 mtspr SPRN_SPRG1,r11
355 mfcr r10
356#ifdef CONFIG_PPC_CHRP
357 mfspr r11,SPRN_SPRG2
358 cmpwi 0,r11,0
359 bne 7f
360#endif /* CONFIG_PPC_CHRP */
361 EXCEPTION_PROLOG_1
3627: EXCEPTION_PROLOG_2
363 addi r3,r1,STACK_FRAME_OVERHEAD
364#ifdef CONFIG_PPC_CHRP
365 mfspr r4,SPRN_SPRG2
366 cmpwi cr1,r4,0
367 bne cr1,1f
368#endif
dc1c1ca3 369 EXC_XFER_STD(0x200, machine_check_exception)
14cf11af
PM		 370#ifdef CONFIG_PPC_CHRP
3711: b machine_check_in_rtas
372#endif
373
374/* Data access exception. */
375 . = 0x300
14cf11af
PM		 376DataAccess:
377 EXCEPTION_PROLOG
14cf11af
PM		 378 mfspr r10,SPRN_DSISR
379 andis. r0,r10,0xa470 /* weird error? */
380 bne 1f /* if not, try to put a PTE */
381 mfspr r4,SPRN_DAR /* into the hash table */
382 rlwinm r3,r10,32-15,21,21 /* DSISR_STORE -> _PAGE_RW */
383 bl hash_page
3841: stw r10,_DSISR(r11)
385 mr r5,r10
386 mfspr r4,SPRN_DAR
387 EXC_XFER_EE_LITE(0x300, handle_page_fault)
388
14cf11af
PM		 389
390/* Instruction access exception. */
391 . = 0x400
14cf11af
PM		 392InstructionAccess:
393 EXCEPTION_PROLOG
14cf11af
PM		 394 andis. r0,r9,0x4000 /* no pte found? */
395 beq 1f /* if so, try to put a PTE */
396 li r3,0 /* into the hash table */
397 mr r4,r12 /* SRR0 is fault address */
398 bl hash_page
3991: mr r4,r12
400 mr r5,r9
401 EXC_XFER_EE_LITE(0x400, handle_page_fault)
402
14cf11af
PM		 403/* External interrupt */
404 EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
405
406/* Alignment exception */
407 . = 0x600
408Alignment:
409 EXCEPTION_PROLOG
410 mfspr r4,SPRN_DAR
411 stw r4,_DAR(r11)
412 mfspr r5,SPRN_DSISR
413 stw r5,_DSISR(r11)
414 addi r3,r1,STACK_FRAME_OVERHEAD
dc1c1ca3 415 EXC_XFER_EE(0x600, alignment_exception)
14cf11af
PM		 416
417/* Program check exception */
dc1c1ca3 418 EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
14cf11af
PM		 419
420/* Floating-point unavailable */
421 . = 0x800
422FPUnavailable:
423 EXCEPTION_PROLOG
424 bne load_up_fpu /* if from user, just load it up */
425 addi r3,r1,STACK_FRAME_OVERHEAD
8dad3f92 426 EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
14cf11af
PM		 427
428/* Decrementer */
429 EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
430
dc1c1ca3
SR		 431 EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
432 EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
14cf11af
PM		 433
434/* System call */
435 . = 0xc00
436SystemCall:
437 EXCEPTION_PROLOG
438 EXC_XFER_EE_LITE(0xc00, DoSyscall)
439
440/* Single step - not used on 601 */
dc1c1ca3
SR		 441 EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
442 EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE)
14cf11af
PM		 443
444/*
445 * The Altivec unavailable trap is at 0x0f20. Foo.
446 * We effectively remap it to 0x3000.
447 * We include an altivec unavailable exception vector even if
448 * not configured for Altivec, so that you can't panic a
449 * non-altivec kernel running on a machine with altivec just
450 * by executing an altivec instruction.
451 */
452 . = 0xf00
453 b Trap_0f
454
455 . = 0xf20
456 b AltiVecUnavailable
457
458Trap_0f:
459 EXCEPTION_PROLOG
460 addi r3,r1,STACK_FRAME_OVERHEAD
dc1c1ca3 461 EXC_XFER_EE(0xf00, unknown_exception)
14cf11af
PM		 462
463/*
464 * Handle TLB miss for instruction on 603/603e.
465 * Note: we get an alternate set of r0 - r3 to use automatically.
466 */
467 . = 0x1000
468InstructionTLBMiss:
469/*
470 * r0: stored ctr
471 * r1: linux style pte ( later becomes ppc hardware pte )
472 * r2: ptr to linux-style pte
473 * r3: scratch
474 */
475 mfctr r0
476 /* Get PTE (linux-style) and check access */
477 mfspr r3,SPRN_IMISS
478 lis r1,KERNELBASE@h /* check if kernel address */
479 cmplw 0,r3,r1
480 mfspr r2,SPRN_SPRG3
481 li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
482 lwz r2,PGDIR(r2)
483 blt+ 112f
484 lis r2,swapper_pg_dir@ha /* if kernel address, use */
485 addi r2,r2,swapper_pg_dir@l /* kernel page table */
486 mfspr r1,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
487 rlwinm r1,r1,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
488112: tophys(r2,r2)
489 rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
490 lwz r2,0(r2) /* get pmd entry */
491 rlwinm. r2,r2,0,0,19 /* extract address of pte page */
492 beq- InstructionAddressInvalid /* return if no mapping */
493 rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
494 lwz r3,0(r2) /* get linux-style pte */
495 andc. r1,r1,r3 /* check access & ~permission */
496 bne- InstructionAddressInvalid /* return if access not permitted */
497 ori r3,r3,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */
498 /*
499 * NOTE! We are assuming this is not an SMP system, otherwise
500 * we would need to update the pte atomically with lwarx/stwcx.
501 */
502 stw r3,0(r2) /* update PTE (accessed bit) */
503 /* Convert linux-style PTE to low word of PPC-style PTE */
504 rlwinm r1,r3,32-10,31,31 /* _PAGE_RW -> PP lsb */
505 rlwinm r2,r3,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
506 and r1,r1,r2 /* writable if _RW and _DIRTY */
507 rlwimi r3,r3,32-1,30,30 /* _PAGE_USER -> PP msb */
508 rlwimi r3,r3,32-1,31,31 /* _PAGE_USER -> PP lsb */
509 ori r1,r1,0xe14 /* clear out reserved bits and M */
510 andc r1,r3,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
511 mtspr SPRN_RPA,r1
512 mfspr r3,SPRN_IMISS
513 tlbli r3
514 mfspr r3,SPRN_SRR1 /* Need to restore CR0 */
515 mtcrf 0x80,r3
516 rfi
517InstructionAddressInvalid:
518 mfspr r3,SPRN_SRR1
519 rlwinm r1,r3,9,6,6 /* Get load/store bit */
520
521 addis r1,r1,0x2000
522 mtspr SPRN_DSISR,r1 /* (shouldn't be needed) */
523 mtctr r0 /* Restore CTR */
524 andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */
525 or r2,r2,r1
526 mtspr SPRN_SRR1,r2
527 mfspr r1,SPRN_IMISS /* Get failing address */
528 rlwinm. r2,r2,0,31,31 /* Check for little endian access */
529 rlwimi r2,r2,1,30,30 /* change 1 -> 3 */
530 xor r1,r1,r2
531 mtspr SPRN_DAR,r1 /* Set fault address */
532 mfmsr r0 /* Restore "normal" registers */
533 xoris r0,r0,MSR_TGPR>>16
534 mtcrf 0x80,r3 /* Restore CR0 */
535 mtmsr r0
536 b InstructionAccess
537
538/*
539 * Handle TLB miss for DATA Load operation on 603/603e
540 */
541 . = 0x1100
542DataLoadTLBMiss:
543/*
544 * r0: stored ctr
545 * r1: linux style pte ( later becomes ppc hardware pte )
546 * r2: ptr to linux-style pte
547 * r3: scratch
548 */
549 mfctr r0
550 /* Get PTE (linux-style) and check access */
551 mfspr r3,SPRN_DMISS
552 lis r1,KERNELBASE@h /* check if kernel address */
553 cmplw 0,r3,r1
554 mfspr r2,SPRN_SPRG3
555 li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
556 lwz r2,PGDIR(r2)
557 blt+ 112f
558 lis r2,swapper_pg_dir@ha /* if kernel address, use */
559 addi r2,r2,swapper_pg_dir@l /* kernel page table */
560 mfspr r1,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
561 rlwinm r1,r1,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
562112: tophys(r2,r2)
563 rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
564 lwz r2,0(r2) /* get pmd entry */
565 rlwinm. r2,r2,0,0,19 /* extract address of pte page */
566 beq- DataAddressInvalid /* return if no mapping */
567 rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
568 lwz r3,0(r2) /* get linux-style pte */
569 andc. r1,r1,r3 /* check access & ~permission */
570 bne- DataAddressInvalid /* return if access not permitted */
571 ori r3,r3,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */
572 /*
573 * NOTE! We are assuming this is not an SMP system, otherwise
574 * we would need to update the pte atomically with lwarx/stwcx.
575 */
576 stw r3,0(r2) /* update PTE (accessed bit) */
577 /* Convert linux-style PTE to low word of PPC-style PTE */
578 rlwinm r1,r3,32-10,31,31 /* _PAGE_RW -> PP lsb */
579 rlwinm r2,r3,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
580 and r1,r1,r2 /* writable if _RW and _DIRTY */
581 rlwimi r3,r3,32-1,30,30 /* _PAGE_USER -> PP msb */
582 rlwimi r3,r3,32-1,31,31 /* _PAGE_USER -> PP lsb */
583 ori r1,r1,0xe14 /* clear out reserved bits and M */
584 andc r1,r3,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
585 mtspr SPRN_RPA,r1
586 mfspr r3,SPRN_DMISS
587 tlbld r3
588 mfspr r3,SPRN_SRR1 /* Need to restore CR0 */
589 mtcrf 0x80,r3
590 rfi
591DataAddressInvalid:
592 mfspr r3,SPRN_SRR1
593 rlwinm r1,r3,9,6,6 /* Get load/store bit */
594 addis r1,r1,0x2000
595 mtspr SPRN_DSISR,r1
596 mtctr r0 /* Restore CTR */
597 andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */
598 mtspr SPRN_SRR1,r2
599 mfspr r1,SPRN_DMISS /* Get failing address */
600 rlwinm. r2,r2,0,31,31 /* Check for little endian access */
601 beq 20f /* Jump if big endian */
602 xori r1,r1,3
60320: mtspr SPRN_DAR,r1 /* Set fault address */
604 mfmsr r0 /* Restore "normal" registers */
605 xoris r0,r0,MSR_TGPR>>16
606 mtcrf 0x80,r3 /* Restore CR0 */
607 mtmsr r0
608 b DataAccess
609
610/*
611 * Handle TLB miss for DATA Store on 603/603e
612 */
613 . = 0x1200
614DataStoreTLBMiss:
615/*
616 * r0: stored ctr
617 * r1: linux style pte ( later becomes ppc hardware pte )
618 * r2: ptr to linux-style pte
619 * r3: scratch
620 */
621 mfctr r0
622 /* Get PTE (linux-style) and check access */
623 mfspr r3,SPRN_DMISS
624 lis r1,KERNELBASE@h /* check if kernel address */
625 cmplw 0,r3,r1
626 mfspr r2,SPRN_SPRG3
627 li r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */
628 lwz r2,PGDIR(r2)
629 blt+ 112f
630 lis r2,swapper_pg_dir@ha /* if kernel address, use */
631 addi r2,r2,swapper_pg_dir@l /* kernel page table */
632 mfspr r1,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
633 rlwinm r1,r1,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
634112: tophys(r2,r2)
635 rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
636 lwz r2,0(r2) /* get pmd entry */
637 rlwinm. r2,r2,0,0,19 /* extract address of pte page */
638 beq- DataAddressInvalid /* return if no mapping */
639 rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
640 lwz r3,0(r2) /* get linux-style pte */
641 andc. r1,r1,r3 /* check access & ~permission */
642 bne- DataAddressInvalid /* return if access not permitted */
643 ori r3,r3,_PAGE_ACCESSED|_PAGE_DIRTY
644 /*
645 * NOTE! We are assuming this is not an SMP system, otherwise
646 * we would need to update the pte atomically with lwarx/stwcx.
647 */
648 stw r3,0(r2) /* update PTE (accessed/dirty bits) */
649 /* Convert linux-style PTE to low word of PPC-style PTE */
650 rlwimi r3,r3,32-1,30,30 /* _PAGE_USER -> PP msb */
651 li r1,0xe15 /* clear out reserved bits and M */
652 andc r1,r3,r1 /* PP = user? 2: 0 */
653 mtspr SPRN_RPA,r1
654 mfspr r3,SPRN_DMISS
655 tlbld r3
656 mfspr r3,SPRN_SRR1 /* Need to restore CR0 */
657 mtcrf 0x80,r3
658 rfi
659
660#ifndef CONFIG_ALTIVEC
dc1c1ca3 661#define altivec_assist_exception unknown_exception
14cf11af
PM		 662#endif
663
dc1c1ca3 664 EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_EE)
14cf11af 665 EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE)
dc1c1ca3 666 EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
dc1c1ca3 667 EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_EE)
14cf11af 668 EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD)
dc1c1ca3 669 EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
dc1c1ca3
SR		 670 EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
671 EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
672 EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
673 EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE)
674 EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
675 EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
676 EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
14cf11af 677 EXCEPTION(0x2000, RunMode, RunModeException, EXC_XFER_EE)
dc1c1ca3
SR		 678 EXCEPTION(0x2100, Trap_21, unknown_exception, EXC_XFER_EE)
679 EXCEPTION(0x2200, Trap_22, unknown_exception, EXC_XFER_EE)
680 EXCEPTION(0x2300, Trap_23, unknown_exception, EXC_XFER_EE)
681 EXCEPTION(0x2400, Trap_24, unknown_exception, EXC_XFER_EE)
682 EXCEPTION(0x2500, Trap_25, unknown_exception, EXC_XFER_EE)
683 EXCEPTION(0x2600, Trap_26, unknown_exception, EXC_XFER_EE)
684 EXCEPTION(0x2700, Trap_27, unknown_exception, EXC_XFER_EE)
685 EXCEPTION(0x2800, Trap_28, unknown_exception, EXC_XFER_EE)
686 EXCEPTION(0x2900, Trap_29, unknown_exception, EXC_XFER_EE)
687 EXCEPTION(0x2a00, Trap_2a, unknown_exception, EXC_XFER_EE)
688 EXCEPTION(0x2b00, Trap_2b, unknown_exception, EXC_XFER_EE)
689 EXCEPTION(0x2c00, Trap_2c, unknown_exception, EXC_XFER_EE)
690 EXCEPTION(0x2d00, Trap_2d, unknown_exception, EXC_XFER_EE)
691 EXCEPTION(0x2e00, Trap_2e, unknown_exception, EXC_XFER_EE)
692 EXCEPTION(0x2f00, MOLTrampoline, unknown_exception, EXC_XFER_EE_LITE)
14cf11af
PM		 693
694 .globl mol_trampoline
695 .set mol_trampoline, i0x2f00
696
697 . = 0x3000
698
699AltiVecUnavailable:
700 EXCEPTION_PROLOG
701#ifdef CONFIG_ALTIVEC
702 bne load_up_altivec /* if from user, just load it up */
703#endif /* CONFIG_ALTIVEC */
dc1c1ca3 704 EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
14cf11af 705
14cf11af
PM		 706#ifdef CONFIG_ALTIVEC
707/* Note that the AltiVec support is closely modeled after the FP
708 * support. Changes to one are likely to be applicable to the
709 * other! */
710load_up_altivec:
711/*
712 * Disable AltiVec for the task which had AltiVec previously,
713 * and save its AltiVec registers in its thread_struct.
714 * Enables AltiVec for use in the kernel on return.
715 * On SMP we know the AltiVec units are free, since we give it up every
716 * switch. -- Kumar
717 */
718 mfmsr r5
719 oris r5,r5,MSR_VEC@h
720 MTMSRD(r5) /* enable use of AltiVec now */
721 isync
722/*
723 * For SMP, we don't do lazy AltiVec switching because it just gets too
724 * horrendously complex, especially when a task switches from one CPU
725 * to another. Instead we call giveup_altivec in switch_to.
726 */
727#ifndef CONFIG_SMP
728 tophys(r6,0)
729 addis r3,r6,last_task_used_altivec@ha
730 lwz r4,last_task_used_altivec@l(r3)
731 cmpwi 0,r4,0
732 beq 1f
733 add r4,r4,r6
734 addi r4,r4,THREAD /* want THREAD of last_task_used_altivec */
735 SAVE_32VRS(0,r10,r4)
736 mfvscr vr0
737 li r10,THREAD_VSCR
738 stvx vr0,r10,r4
739 lwz r5,PT_REGS(r4)
740 add r5,r5,r6
741 lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
742 lis r10,MSR_VEC@h
743 andc r4,r4,r10 /* disable altivec for previous task */
744 stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
7451:
746#endif /* CONFIG_SMP */
747 /* enable use of AltiVec after return */
748 oris r9,r9,MSR_VEC@h
749 mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */
750 li r4,1
751 li r10,THREAD_VSCR
752 stw r4,THREAD_USED_VR(r5)
753 lvx vr0,r10,r5
754 mtvscr vr0
755 REST_32VRS(0,r10,r5)
756#ifndef CONFIG_SMP
757 subi r4,r5,THREAD
758 sub r4,r4,r6
759 stw r4,last_task_used_altivec@l(r3)
760#endif /* CONFIG_SMP */
761 /* restore registers and return */
762 /* we haven't used ctr or xer or lr */
763 b fast_exception_return
764
765/*
766 * AltiVec unavailable trap from kernel - print a message, but let
767 * the task use AltiVec in the kernel until it returns to user mode.
768 */
769KernelAltiVec:
770 lwz r3,_MSR(r1)
771 oris r3,r3,MSR_VEC@h
772 stw r3,_MSR(r1) /* enable use of AltiVec after return */
773 lis r3,87f@h
774 ori r3,r3,87f@l
775 mr r4,r2 /* current */
776 lwz r5,_NIP(r1)
777 bl printk
778 b ret_from_except
77987: .string "AltiVec used in kernel (task=%p, pc=%x) \n"
780 .align 4,0
781
782/*
783 * giveup_altivec(tsk)
784 * Disable AltiVec for the task given as the argument,
785 * and save the AltiVec registers in its thread_struct.
786 * Enables AltiVec for use in the kernel on return.
787 */
788
789 .globl giveup_altivec
790giveup_altivec:
791 mfmsr r5
792 oris r5,r5,MSR_VEC@h
793 SYNC
794 MTMSRD(r5) /* enable use of AltiVec now */
795 isync
796 cmpwi 0,r3,0
797 beqlr- /* if no previous owner, done */
798 addi r3,r3,THREAD /* want THREAD of task */
799 lwz r5,PT_REGS(r3)
800 cmpwi 0,r5,0
801 SAVE_32VRS(0, r4, r3)
802 mfvscr vr0
803 li r4,THREAD_VSCR
804 stvx vr0,r4,r3
805 beq 1f
806 lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
807 lis r3,MSR_VEC@h
808 andc r4,r4,r3 /* disable AltiVec for previous task */
809 stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
8101:
811#ifndef CONFIG_SMP
812 li r5,0
813 lis r4,last_task_used_altivec@ha
814 stw r5,last_task_used_altivec@l(r4)
815#endif /* CONFIG_SMP */
816 blr
817#endif /* CONFIG_ALTIVEC */
818
819/*
820 * This code is jumped to from the startup code to copy
821 * the kernel image to physical address 0.
822 */
823relocate_kernel:
824 addis r9,r26,klimit@ha /* fetch klimit */
825 lwz r25,klimit@l(r9)
826 addis r25,r25,-KERNELBASE@h
827 li r3,0 /* Destination base address */
828 li r6,0 /* Destination offset */
829 li r5,0x4000 /* # bytes of memory to copy */
830 bl copy_and_flush /* copy the first 0x4000 bytes */
831 addi r0,r3,4f@l /* jump to the address of 4f */
832 mtctr r0 /* in copy and do the rest. */
833 bctr /* jump to the copy */
8344: mr r5,r25
835 bl copy_and_flush /* copy the rest */
836 b turn_on_mmu
837
838/*
839 * Copy routine used to copy the kernel to start at physical address 0
840 * and flush and invalidate the caches as needed.
841 * r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset
842 * on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5.
843 */
77f543cb 844_GLOBAL(copy_and_flush)
14cf11af
PM		 845 addi r5,r5,-4
846 addi r6,r6,-4
7dffb720 8474: li r0,L1_CACHE_BYTES/4
14cf11af
PM		 848 mtctr r0
8493: addi r6,r6,4 /* copy a cache line */
850 lwzx r0,r6,r4
851 stwx r0,r6,r3
852 bdnz 3b
853 dcbst r6,r3 /* write it to memory */
854 sync
855 icbi r6,r3 /* flush the icache line */
856 cmplw 0,r6,r5
857 blt 4b
858 sync /* additional sync needed on g4 */
859 isync
860 addi r5,r5,4
861 addi r6,r6,4
862 blr
863
864#ifdef CONFIG_APUS
865/*
866 * On APUS the physical base address of the kernel is not known at compile
867 * time, which means the __pa/__va constants used are incorrect. In the
868 * __init section is recorded the virtual addresses of instructions using
869 * these constants, so all that has to be done is fix these before
870 * continuing the kernel boot.
871 *
872 * r4 = The physical address of the kernel base.
873 */
874fix_mem_constants:
875 mr r10,r4
876 addis r10,r10,-KERNELBASE@h /* virt_to_phys constant */
877 neg r11,r10 /* phys_to_virt constant */
878
879 lis r12,__vtop_table_begin@h
880 ori r12,r12,__vtop_table_begin@l
881 add r12,r12,r10 /* table begin phys address */
882 lis r13,__vtop_table_end@h
883 ori r13,r13,__vtop_table_end@l
884 add r13,r13,r10 /* table end phys address */
885 subi r12,r12,4
886 subi r13,r13,4
8871: lwzu r14,4(r12) /* virt address of instruction */
888 add r14,r14,r10 /* phys address of instruction */
889 lwz r15,0(r14) /* instruction, now insert top */
890 rlwimi r15,r10,16,16,31 /* half of vp const in low half */
891 stw r15,0(r14) /* of instruction and restore. */
892 dcbst r0,r14 /* write it to memory */
893 sync
894 icbi r0,r14 /* flush the icache line */
895 cmpw r12,r13
896 bne 1b
897 sync /* additional sync needed on g4 */
898 isync
899
900/*
901 * Map the memory where the exception handlers will
902 * be copied to when hash constants have been patched.
903 */
904#ifdef CONFIG_APUS_FAST_EXCEPT
905 lis r8,0xfff0
906#else
907 lis r8,0
908#endif
909 ori r8,r8,0x2 /* 128KB, supervisor */
910 mtspr SPRN_DBAT3U,r8
911 mtspr SPRN_DBAT3L,r8
912
913 lis r12,__ptov_table_begin@h
914 ori r12,r12,__ptov_table_begin@l
915 add r12,r12,r10 /* table begin phys address */
916 lis r13,__ptov_table_end@h
917 ori r13,r13,__ptov_table_end@l
918 add r13,r13,r10 /* table end phys address */
919 subi r12,r12,4
920 subi r13,r13,4
9211: lwzu r14,4(r12) /* virt address of instruction */
922 add r14,r14,r10 /* phys address of instruction */
923 lwz r15,0(r14) /* instruction, now insert top */
924 rlwimi r15,r11,16,16,31 /* half of pv const in low half*/
925 stw r15,0(r14) /* of instruction and restore. */
926 dcbst r0,r14 /* write it to memory */
927 sync
928 icbi r0,r14 /* flush the icache line */
929 cmpw r12,r13
930 bne 1b
931
932 sync /* additional sync needed on g4 */
933 isync /* No speculative loading until now */
934 blr
935
936/***********************************************************************
937 * Please note that on APUS the exception handlers are located at the
938 * physical address 0xfff0000. For this reason, the exception handlers
939 * cannot use relative branches to access the code below.
940 ***********************************************************************/
941#endif /* CONFIG_APUS */
942
943#ifdef CONFIG_SMP
944#ifdef CONFIG_GEMINI
945 .globl __secondary_start_gemini
946__secondary_start_gemini:
947 mfspr r4,SPRN_HID0
948 ori r4,r4,HID0_ICFI
949 li r3,0
950 ori r3,r3,HID0_ICE
951 andc r4,r4,r3
952 mtspr SPRN_HID0,r4
953 sync
954 b __secondary_start
955#endif /* CONFIG_GEMINI */
956
957 .globl __secondary_start_pmac_0
958__secondary_start_pmac_0:
959 /* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */
960 li r24,0
961 b 1f
962 li r24,1
963 b 1f
964 li r24,2
965 b 1f
966 li r24,3
9671:
968 /* on powersurge, we come in here with IR=0 and DR=1, and DBAT 0
969 set to map the 0xf0000000 - 0xffffffff region */
970 mfmsr r0
971 rlwinm r0,r0,0,28,26 /* clear DR (0x10) */
972 SYNC
973 mtmsr r0
974 isync
975
976 .globl __secondary_start
977__secondary_start:
14cf11af
PM		 978 /* Copy some CPU settings from CPU 0 */
979 bl __restore_cpu_setup
980
981 lis r3,-KERNELBASE@h
982 mr r4,r24
14cf11af
PM		 983 bl call_setup_cpu /* Call setup_cpu for this CPU */
984#ifdef CONFIG_6xx
985 lis r3,-KERNELBASE@h
986 bl init_idle_6xx
987#endif /* CONFIG_6xx */
14cf11af
PM		 988
989 /* get current_thread_info and current */
990 lis r1,secondary_ti@ha
991 tophys(r1,r1)
992 lwz r1,secondary_ti@l(r1)
993 tophys(r2,r1)
994 lwz r2,TI_TASK(r2)
995
996 /* stack */
997 addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
998 li r0,0
999 tophys(r3,r1)
1000 stw r0,0(r3)
1001
1002 /* load up the MMU */
1003 bl load_up_mmu
1004
1005 /* ptr to phys current thread */
1006 tophys(r4,r2)
1007 addi r4,r4,THREAD /* phys address of our thread_struct */
1008 CLR_TOP32(r4)
1009 mtspr SPRN_SPRG3,r4
1010 li r3,0
1011 mtspr SPRN_SPRG2,r3 /* 0 => not in RTAS */
1012
1013 /* enable MMU and jump to start_secondary */
1014 li r4,MSR_KERNEL
1015 FIX_SRR1(r4,r5)
1016 lis r3,start_secondary@h
1017 ori r3,r3,start_secondary@l
1018 mtspr SPRN_SRR0,r3
1019 mtspr SPRN_SRR1,r4
1020 SYNC
1021 RFI
1022#endif /* CONFIG_SMP */
1023
1024/*
1025 * Those generic dummy functions are kept for CPUs not
1026 * included in CONFIG_6xx
1027 */
187a0067 1028#if !defined(CONFIG_6xx)
14cf11af
PM		 1029_GLOBAL(__save_cpu_setup)
1030 blr
1031_GLOBAL(__restore_cpu_setup)
1032 blr
187a0067 1033#endif /* !defined(CONFIG_6xx) */
14cf11af
PM		 1034
1035
1036/*
1037 * Load stuff into the MMU. Intended to be called with
1038 * IR=0 and DR=0.
1039 */
1040load_up_mmu:
1041 sync /* Force all PTE updates to finish */
1042 isync
1043 tlbia /* Clear all TLB entries */
1044 sync /* wait for tlbia/tlbie to finish */
1045 TLBSYNC /* ... on all CPUs */
1046 /* Load the SDR1 register (hash table base & size) */
1047 lis r6,_SDR1@ha
1048 tophys(r6,r6)
1049 lwz r6,_SDR1@l(r6)
1050 mtspr SPRN_SDR1,r6
14cf11af
PM		 1051 li r0,16 /* load up segment register values */
1052 mtctr r0 /* for context 0 */
1053 lis r3,0x2000 /* Ku = 1, VSID = 0 */
1054 li r4,0
10553: mtsrin r3,r4
1056 addi r3,r3,0x111 /* increment VSID */
1057 addis r4,r4,0x1000 /* address of next segment */
1058 bdnz 3b
187a0067 1059
14cf11af
PM		 1060/* Load the BAT registers with the values set up by MMU_init.
1061 MMU_init takes care of whether we're on a 601 or not. */
1062 mfpvr r3
1063 srwi r3,r3,16
1064 cmpwi r3,1
1065 lis r3,BATS@ha
1066 addi r3,r3,BATS@l
1067 tophys(r3,r3)
1068 LOAD_BAT(0,r3,r4,r5)
1069 LOAD_BAT(1,r3,r4,r5)
1070 LOAD_BAT(2,r3,r4,r5)
1071 LOAD_BAT(3,r3,r4,r5)
187a0067 1072
14cf11af
PM		 1073 blr
1074
1075/*
1076 * This is where the main kernel code starts.
1077 */
1078start_here:
1079 /* ptr to current */
1080 lis r2,init_task@h
1081 ori r2,r2,init_task@l
1082 /* Set up for using our exception vectors */
1083 /* ptr to phys current thread */
1084 tophys(r4,r2)
1085 addi r4,r4,THREAD /* init task's THREAD */
1086 CLR_TOP32(r4)
1087 mtspr SPRN_SPRG3,r4
1088 li r3,0
1089 mtspr SPRN_SPRG2,r3 /* 0 => not in RTAS */
1090
1091 /* stack */
1092 lis r1,init_thread_union@ha
1093 addi r1,r1,init_thread_union@l
1094 li r0,0
1095 stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
1096/*
187a0067 1097 * Do early platform-specific initialization,
14cf11af
PM		 1098 * and set up the MMU.
1099 */
1100 mr r3,r31
1101 mr r4,r30
14cf11af
PM		 1102 bl machine_init
1103 bl MMU_init
1104
1105#ifdef CONFIG_APUS
1106 /* Copy exception code to exception vector base on APUS. */
1107 lis r4,KERNELBASE@h
1108#ifdef CONFIG_APUS_FAST_EXCEPT
1109 lis r3,0xfff0 /* Copy to 0xfff00000 */
1110#else
1111 lis r3,0 /* Copy to 0x00000000 */
1112#endif
1113 li r5,0x4000 /* # bytes of memory to copy */
1114 li r6,0
1115 bl copy_and_flush /* copy the first 0x4000 bytes */
1116#endif /* CONFIG_APUS */
1117
1118/*
1119 * Go back to running unmapped so we can load up new values
1120 * for SDR1 (hash table pointer) and the segment registers
1121 * and change to using our exception vectors.
1122 */
1123 lis r4,2f@h
1124 ori r4,r4,2f@l
1125 tophys(r4,r4)
1126 li r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
1127 FIX_SRR1(r3,r5)
1128 mtspr SPRN_SRR0,r4
1129 mtspr SPRN_SRR1,r3
1130 SYNC
1131 RFI
1132/* Load up the kernel context */
11332: bl load_up_mmu
1134
1135#ifdef CONFIG_BDI_SWITCH
1136 /* Add helper information for the Abatron bdiGDB debugger.
1137 * We do this here because we know the mmu is disabled, and
1138 * will be enabled for real in just a few instructions.
1139 */
1140 lis r5, abatron_pteptrs@h
1141 ori r5, r5, abatron_pteptrs@l
1142 stw r5, 0xf0(r0) /* This much match your Abatron config */
1143 lis r6, swapper_pg_dir@h
1144 ori r6, r6, swapper_pg_dir@l
1145 tophys(r5, r5)
1146 stw r6, 0(r5)
1147#endif /* CONFIG_BDI_SWITCH */
1148
1149/* Now turn on the MMU for real! */
1150 li r4,MSR_KERNEL
1151 FIX_SRR1(r4,r5)
1152 lis r3,start_kernel@h
1153 ori r3,r3,start_kernel@l
1154 mtspr SPRN_SRR0,r3
1155 mtspr SPRN_SRR1,r4
1156 SYNC
1157 RFI
1158
1159/*
1160 * Set up the segment registers for a new context.
1161 */
1162_GLOBAL(set_context)
1163 mulli r3,r3,897 /* multiply context by skew factor */
1164 rlwinm r3,r3,4,8,27 /* VSID = (context & 0xfffff) << 4 */
1165 addis r3,r3,0x6000 /* Set Ks, Ku bits */
1166 li r0,NUM_USER_SEGMENTS
1167 mtctr r0
1168
1169#ifdef CONFIG_BDI_SWITCH
1170 /* Context switch the PTE pointer for the Abatron BDI2000.
1171 * The PGDIR is passed as second argument.
1172 */
1173 lis r5, KERNELBASE@h
1174 lwz r5, 0xf0(r5)
1175 stw r4, 0x4(r5)
1176#endif
1177 li r4,0
1178 isync
11793:
14cf11af
PM		 1180 mtsrin r3,r4
1181 addi r3,r3,0x111 /* next VSID */
1182 rlwinm r3,r3,0,8,3 /* clear out any overflow from VSID field */
1183 addis r4,r4,0x1000 /* address of next segment */
1184 bdnz 3b
1185 sync
1186 isync
1187 blr
1188
1189/*
1190 * An undocumented "feature" of 604e requires that the v bit
1191 * be cleared before changing BAT values.
1192 *
1193 * Also, newer IBM firmware does not clear bat3 and 4 so
1194 * this makes sure it's done.
1195 * -- Cort
1196 */
1197clear_bats:
1198 li r10,0
1199 mfspr r9,SPRN_PVR
1200 rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
1201 cmpwi r9, 1
1202 beq 1f
1203
1204 mtspr SPRN_DBAT0U,r10
1205 mtspr SPRN_DBAT0L,r10
1206 mtspr SPRN_DBAT1U,r10
1207 mtspr SPRN_DBAT1L,r10
1208 mtspr SPRN_DBAT2U,r10
1209 mtspr SPRN_DBAT2L,r10
1210 mtspr SPRN_DBAT3U,r10
1211 mtspr SPRN_DBAT3L,r10
12121:
1213 mtspr SPRN_IBAT0U,r10
1214 mtspr SPRN_IBAT0L,r10
1215 mtspr SPRN_IBAT1U,r10
1216 mtspr SPRN_IBAT1L,r10
1217 mtspr SPRN_IBAT2U,r10
1218 mtspr SPRN_IBAT2L,r10
1219 mtspr SPRN_IBAT3U,r10
1220 mtspr SPRN_IBAT3L,r10
1221BEGIN_FTR_SECTION
1222 /* Here's a tweak: at this point, CPU setup have
1223 * not been called yet, so HIGH_BAT_EN may not be
1224 * set in HID0 for the 745x processors. However, it
1225 * seems that doesn't affect our ability to actually
1226 * write to these SPRs.
1227 */
1228 mtspr SPRN_DBAT4U,r10
1229 mtspr SPRN_DBAT4L,r10
1230 mtspr SPRN_DBAT5U,r10
1231 mtspr SPRN_DBAT5L,r10
1232 mtspr SPRN_DBAT6U,r10
1233 mtspr SPRN_DBAT6L,r10
1234 mtspr SPRN_DBAT7U,r10
1235 mtspr SPRN_DBAT7L,r10
1236 mtspr SPRN_IBAT4U,r10
1237 mtspr SPRN_IBAT4L,r10
1238 mtspr SPRN_IBAT5U,r10
1239 mtspr SPRN_IBAT5L,r10
1240 mtspr SPRN_IBAT6U,r10
1241 mtspr SPRN_IBAT6L,r10
1242 mtspr SPRN_IBAT7U,r10
1243 mtspr SPRN_IBAT7L,r10
1244END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS)
1245 blr
1246
1247flush_tlbs:
1248 lis r10, 0x40
12491: addic. r10, r10, -0x1000
1250 tlbie r10
1251 blt 1b
1252 sync
1253 blr
1254
1255mmu_off:
1256 addi r4, r3, __after_mmu_off - _start
1257 mfmsr r3
1258 andi. r0,r3,MSR_DR|MSR_IR /* MMU enabled? */
1259 beqlr
1260 andc r3,r3,r0
1261 mtspr SPRN_SRR0,r4
1262 mtspr SPRN_SRR1,r3
1263 sync
1264 RFI
1265
14cf11af
PM		 1266/*
1267 * Use the first pair of BAT registers to map the 1st 16MB
1268 * of RAM to KERNELBASE. From this point on we can't safely
1269 * call OF any more.
1270 */
1271initial_bats:
1272 lis r11,KERNELBASE@h
14cf11af
PM		 1273 mfspr r9,SPRN_PVR
1274 rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
1275 cmpwi 0,r9,1
1276 bne 4f
1277 ori r11,r11,4 /* set up BAT registers for 601 */
1278 li r8,0x7f /* valid, block length = 8MB */
1279 oris r9,r11,0x800000@h /* set up BAT reg for 2nd 8M */
1280 oris r10,r8,0x800000@h /* set up BAT reg for 2nd 8M */
1281 mtspr SPRN_IBAT0U,r11 /* N.B. 601 has valid bit in */
1282 mtspr SPRN_IBAT0L,r8 /* lower BAT register */
1283 mtspr SPRN_IBAT1U,r9
1284 mtspr SPRN_IBAT1L,r10
1285 isync
1286 blr
14cf11af
PM		 1287
12884: tophys(r8,r11)
1289#ifdef CONFIG_SMP
1290 ori r8,r8,0x12 /* R/W access, M=1 */
1291#else
1292 ori r8,r8,2 /* R/W access */
1293#endif /* CONFIG_SMP */
1294#ifdef CONFIG_APUS
1295 ori r11,r11,BL_8M<<2|0x2 /* set up 8MB BAT registers for 604 */
1296#else
1297 ori r11,r11,BL_256M<<2|0x2 /* set up BAT registers for 604 */
1298#endif /* CONFIG_APUS */
1299
14cf11af
PM		 1300 mtspr SPRN_DBAT0L,r8 /* N.B. 6xx (not 601) have valid */
1301 mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */
1302 mtspr SPRN_IBAT0L,r8
1303 mtspr SPRN_IBAT0U,r11
1304 isync
1305 blr
1306
14cf11af
PM		 1307
1308#ifdef CONFIG_8260
1309/* Jump into the system reset for the rom.
1310 * We first disable the MMU, and then jump to the ROM reset address.
1311 *
1312 * r3 is the board info structure, r4 is the location for starting.
1313 * I use this for building a small kernel that can load other kernels,
1314 * rather than trying to write or rely on a rom monitor that can tftp load.
1315 */
1316 .globl m8260_gorom
1317m8260_gorom:
1318 mfmsr r0
1319 rlwinm r0,r0,0,17,15 /* clear MSR_EE in r0 */
1320 sync
1321 mtmsr r0
1322 sync
1323 mfspr r11, SPRN_HID0
1324 lis r10, 0
1325 ori r10,r10,HID0_ICE|HID0_DCE
1326 andc r11, r11, r10
1327 mtspr SPRN_HID0, r11
1328 isync
1329 li r5, MSR_ME|MSR_RI
1330 lis r6,2f@h
1331 addis r6,r6,-KERNELBASE@h
1332 ori r6,r6,2f@l
1333 mtspr SPRN_SRR0,r6
1334 mtspr SPRN_SRR1,r5
1335 isync
1336 sync
1337 rfi
13382:
1339 mtlr r4
1340 blr
1341#endif
1342
1343
1344/*
1345 * We put a few things here that have to be page-aligned.
1346 * This stuff goes at the beginning of the data segment,
1347 * which is page-aligned.
1348 */
1349 .data
1350 .globl sdata
1351sdata:
1352 .globl empty_zero_page
1353empty_zero_page:
1354 .space 4096
1355
1356 .globl swapper_pg_dir
1357swapper_pg_dir:
1358 .space 4096
1359
1360/*
1361 * This space gets a copy of optional info passed to us by the bootstrap
1362 * Used to pass parameters into the kernel like root=/dev/sda1, etc.
1363 */
1364 .globl cmd_line
1365cmd_line:
1366 .space 512
1367
1368 .globl intercept_table
1369intercept_table:
1370 .long 0, 0, i0x200, i0x300, i0x400, 0, i0x600, i0x700
1371 .long i0x800, 0, 0, 0, 0, i0xd00, 0, 0
1372 .long 0, 0, 0, i0x1300, 0, 0, 0, 0
1373 .long 0, 0, 0, 0, 0, 0, 0, 0
1374 .long 0, 0, 0, 0, 0, 0, 0, 0
1375 .long 0, 0, 0, 0, 0, 0, 0, 0
1376
1377/* Room for two PTE pointers, usually the kernel and current user pointers
1378 * to their respective root page table.
1379 */
1380abatron_pteptrs:
1381 .space 8
Linux kernel - Deliverables
This page took 0.083003 seconds and 5 git commands to generate.