Commit | Line | Data |
---|---|---|
9e9f6010 CS |
1 | |
2 | #include "req-gen/_begin.h" | |
3 | ||
4 | /* | |
5 | * Based on the document "getPerfCountInfo v1.07" | |
6 | */ | |
7 | ||
8 | /* | |
9 | * #define REQUEST_NAME counter_request_name | |
10 | * #define REQUEST_NUM r_num | |
11 | * #define REQUEST_IDX_KIND starting_index_kind | |
12 | * #include I(REQUEST_BEGIN) | |
13 | * REQUEST( | |
14 | * __field(...) | |
15 | * __field(...) | |
16 | * __array(...) | |
17 | * __count(...) | |
18 | * ) | |
19 | * #include I(REQUEST_END) | |
20 | * | |
21 | * - starting_index_kind is one of the following, depending on the event: | |
22 | * | |
97bf2640 CS |
23 | * hw_chip_id: hardware chip id or -1 for current hw chip |
24 | * partition_id | |
25 | * sibling_part_id, | |
9e9f6010 CS |
26 | * phys_processor_idx: |
27 | * 0xffffffffffffffff: or -1, which means it is irrelavant for the event | |
28 | * | |
29 | * __count(offset, bytes, name): | |
30 | * a counter that should be exposed via perf | |
31 | * __field(offset, bytes, name) | |
32 | * a normal field | |
33 | * __array(offset, bytes, name) | |
34 | * an array of bytes | |
35 | * | |
36 | * | |
37 | * @bytes for __count, and __field _must_ be a numeral token | |
38 | * in decimal, not an expression and not in hex. | |
39 | * | |
40 | * | |
41 | * TODO: | |
42 | * - expose secondary index (if any counter ever uses it, only 0xA0 | |
43 | * appears to use it right now, and it doesn't have any counters) | |
44 | * - embed versioning info | |
45 | * - include counter descriptions | |
46 | */ | |
47 | #define REQUEST_NAME dispatch_timebase_by_processor | |
48 | #define REQUEST_NUM 0x10 | |
49 | #define REQUEST_IDX_KIND "phys_processor_idx=?" | |
50 | #include I(REQUEST_BEGIN) | |
51 | REQUEST(__count(0, 8, processor_time_in_timebase_cycles) | |
52 | __field(0x8, 4, hw_processor_id) | |
53 | __field(0xC, 2, owning_part_id) | |
54 | __field(0xE, 1, processor_state) | |
55 | __field(0xF, 1, version) | |
56 | __field(0x10, 4, hw_chip_id) | |
57 | __field(0x14, 4, phys_module_id) | |
58 | __field(0x18, 4, primary_affinity_domain_idx) | |
59 | __field(0x1C, 4, secondary_affinity_domain_idx) | |
60 | __field(0x20, 4, processor_version) | |
61 | __field(0x24, 2, logical_processor_idx) | |
62 | __field(0x26, 2, reserved) | |
63 | __field(0x28, 4, processor_id_register) | |
64 | __field(0x2C, 4, phys_processor_idx) | |
65 | ) | |
66 | #include I(REQUEST_END) | |
67 | ||
97bf2640 CS |
68 | #define REQUEST_NAME entitled_capped_uncapped_donated_idle_timebase_by_partition |
69 | #define REQUEST_NUM 0x20 | |
70 | #define REQUEST_IDX_KIND "sibling_part_id=?" | |
71 | #include I(REQUEST_BEGIN) | |
72 | REQUEST(__field(0, 8, partition_id) | |
73 | __count(0x8, 8, entitled_cycles) | |
74 | __count(0x10, 8, consumed_capped_cycles) | |
75 | __count(0x18, 8, consumed_uncapped_cycles) | |
76 | __count(0x20, 8, cycles_donated) | |
77 | __count(0x28, 8, purr_idle_cycles) | |
78 | ) | |
79 | #include I(REQUEST_END) | |
80 | ||
81 | /* | |
82 | * Not available for counter_info_version >= 0x8, use | |
83 | * run_instruction_cycles_by_partition(0x100) instead. | |
84 | */ | |
85 | #define REQUEST_NAME run_instructions_run_cycles_by_partition | |
86 | #define REQUEST_NUM 0x30 | |
87 | #define REQUEST_IDX_KIND "sibling_part_id=?" | |
88 | #include I(REQUEST_BEGIN) | |
89 | REQUEST(__field(0, 8, partition_id) | |
90 | __count(0x8, 8, instructions_completed) | |
91 | __count(0x10, 8, cycles) | |
92 | ) | |
93 | #include I(REQUEST_END) | |
94 | ||
9e9f6010 CS |
95 | #define REQUEST_NAME system_performance_capabilities |
96 | #define REQUEST_NUM 0x40 | |
97 | #define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff" | |
98 | #include I(REQUEST_BEGIN) | |
99 | REQUEST(__field(0, 1, perf_collect_privileged) | |
100 | __field(0x1, 1, capability_mask) | |
101 | __array(0x2, 0xE, reserved) | |
102 | ) | |
103 | #include I(REQUEST_END) | |
104 | ||
97bf2640 CS |
105 | #define REQUEST_NAME processor_bus_utilization_abc_links |
106 | #define REQUEST_NUM 0x50 | |
107 | #define REQUEST_IDX_KIND "hw_chip_id=?" | |
108 | #include I(REQUEST_BEGIN) | |
109 | REQUEST(__field(0, 4, hw_chip_id) | |
110 | __array(0x4, 0xC, reserved1) | |
111 | __count(0x10, 8, total_link_cycles) | |
112 | __count(0x18, 8, idle_cycles_for_a_link) | |
113 | __count(0x20, 8, idle_cycles_for_b_link) | |
114 | __count(0x28, 8, idle_cycles_for_c_link) | |
115 | __array(0x30, 0x20, reserved2) | |
116 | ) | |
117 | #include I(REQUEST_END) | |
118 | ||
119 | #define REQUEST_NAME processor_bus_utilization_wxyz_links | |
120 | #define REQUEST_NUM 0x60 | |
121 | #define REQUEST_IDX_KIND "hw_chip_id=?" | |
122 | #include I(REQUEST_BEGIN) | |
123 | REQUEST(__field(0, 4, hw_chip_id) | |
124 | __array(0x4, 0xC, reserved1) | |
125 | __count(0x10, 8, total_link_cycles) | |
126 | __count(0x18, 8, idle_cycles_for_w_link) | |
127 | __count(0x20, 8, idle_cycles_for_x_link) | |
128 | __count(0x28, 8, idle_cycles_for_y_link) | |
129 | __count(0x30, 8, idle_cycles_for_z_link) | |
130 | __array(0x38, 0x28, reserved2) | |
131 | ) | |
132 | #include I(REQUEST_END) | |
133 | ||
134 | #define REQUEST_NAME processor_bus_utilization_gx_links | |
135 | #define REQUEST_NUM 0x70 | |
136 | #define REQUEST_IDX_KIND "hw_chip_id=?" | |
137 | #include I(REQUEST_BEGIN) | |
138 | REQUEST(__field(0, 4, hw_chip_id) | |
139 | __array(0x4, 0xC, reserved1) | |
140 | __count(0x10, 8, gx0_in_address_cycles) | |
141 | __count(0x18, 8, gx0_in_data_cycles) | |
142 | __count(0x20, 8, gx0_in_retries) | |
143 | __count(0x28, 8, gx0_in_bus_cycles) | |
144 | __count(0x30, 8, gx0_in_cycles_total) | |
145 | __count(0x38, 8, gx0_out_address_cycles) | |
146 | __count(0x40, 8, gx0_out_data_cycles) | |
147 | __count(0x48, 8, gx0_out_retries) | |
148 | __count(0x50, 8, gx0_out_bus_cycles) | |
149 | __count(0x58, 8, gx0_out_cycles_total) | |
150 | __count(0x60, 8, gx1_in_address_cycles) | |
151 | __count(0x68, 8, gx1_in_data_cycles) | |
152 | __count(0x70, 8, gx1_in_retries) | |
153 | __count(0x78, 8, gx1_in_bus_cycles) | |
154 | __count(0x80, 8, gx1_in_cycles_total) | |
155 | __count(0x88, 8, gx1_out_address_cycles) | |
156 | __count(0x90, 8, gx1_out_data_cycles) | |
157 | __count(0x98, 8, gx1_out_retries) | |
158 | __count(0xA0, 8, gx1_out_bus_cycles) | |
159 | __count(0xA8, 8, gx1_out_cycles_total) | |
160 | ) | |
161 | #include I(REQUEST_END) | |
162 | ||
163 | #define REQUEST_NAME processor_bus_utilization_mc_links | |
164 | #define REQUEST_NUM 0x80 | |
165 | #define REQUEST_IDX_KIND "hw_chip_id=?" | |
166 | #include I(REQUEST_BEGIN) | |
167 | REQUEST(__field(0, 4, hw_chip_id) | |
168 | __array(0x4, 0xC, reserved1) | |
169 | __count(0x10, 8, mc0_frames) | |
170 | __count(0x18, 8, mc0_reads) | |
171 | __count(0x20, 8, mc0_write) | |
172 | __count(0x28, 8, mc0_total_cycles) | |
173 | __count(0x30, 8, mc1_frames) | |
174 | __count(0x38, 8, mc1_reads) | |
175 | __count(0x40, 8, mc1_writes) | |
176 | __count(0x48, 8, mc1_total_cycles) | |
177 | ) | |
178 | #include I(REQUEST_END) | |
179 | ||
180 | /* Processor_config (0x90) skipped, no counters */ | |
181 | /* Current_processor_frequency (0x91) skipped, no counters */ | |
182 | ||
183 | #define REQUEST_NAME processor_core_utilization | |
184 | #define REQUEST_NUM 0x94 | |
185 | #define REQUEST_IDX_KIND "phys_processor_idx=?" | |
186 | #include I(REQUEST_BEGIN) | |
187 | REQUEST(__field(0, 4, phys_processor_idx) | |
188 | __field(0x4, 4, hw_processor_id) | |
189 | __count(0x8, 8, cycles_across_any_thread) | |
190 | __count(0x10, 8, timebase_at_collection) | |
191 | __count(0x18, 8, purr_cycles) | |
192 | __count(0x20, 8, sum_of_cycles_across_all_threads) | |
193 | __count(0x28, 8, instructions_completed) | |
194 | ) | |
195 | #include I(REQUEST_END) | |
196 | ||
197 | /* Processor_core_power_mode (0x95) skipped, no counters */ | |
198 | /* Affinity_domain_information_by_virtual_processor (0xA0) skipped, | |
199 | * no counters */ | |
200 | /* Affinity_domain_information_by_domain (0xB0) skipped, no counters */ | |
201 | /* Affinity_domain_information_by_partition (0xB1) skipped, no counters */ | |
202 | /* Physical_memory_info (0xC0) skipped, no counters */ | |
203 | /* Processor_bus_topology (0xD0) skipped, no counters */ | |
204 | ||
205 | #define REQUEST_NAME partition_hypervisor_queuing_times | |
206 | #define REQUEST_NUM 0xE0 | |
207 | #define REQUEST_IDX_KIND "partition_id=?" | |
208 | #include I(REQUEST_BEGIN) | |
209 | REQUEST(__field(0, 2, partition_id) | |
210 | __array(0x2, 6, reserved1) | |
211 | __count(0x8, 8, time_waiting_for_entitlement) | |
212 | __count(0x10, 8, times_waited_for_entitlement) | |
213 | __count(0x18, 8, time_waiting_for_phys_processor) | |
214 | __count(0x20, 8, times_waited_for_phys_processor) | |
215 | __count(0x28, 8, dispatches_on_home_core) | |
216 | __count(0x30, 8, dispatches_on_home_primary_affinity_domain) | |
217 | __count(0x38, 8, dispatches_on_home_secondary_affinity_domain) | |
218 | __count(0x40, 8, dispatches_off_home_secondary_affinity_domain) | |
219 | __count(0x48, 8, dispatches_on_dedicated_processor_donating_cycles) | |
220 | ) | |
221 | #include I(REQUEST_END) | |
222 | ||
223 | #define REQUEST_NAME system_hypervisor_times | |
224 | #define REQUEST_NUM 0xF0 | |
225 | #define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff" | |
226 | #include I(REQUEST_BEGIN) | |
227 | REQUEST(__count(0, 8, time_spent_to_dispatch_virtual_processors) | |
228 | __count(0x8, 8, time_spent_processing_virtual_processor_timers) | |
229 | __count(0x10, 8, time_spent_managing_partitions_over_entitlement) | |
230 | __count(0x18, 8, time_spent_on_system_management) | |
231 | ) | |
232 | #include I(REQUEST_END) | |
233 | ||
234 | #define REQUEST_NAME system_tlbie_count_and_time | |
235 | #define REQUEST_NUM 0xF4 | |
236 | #define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff" | |
237 | #include I(REQUEST_BEGIN) | |
238 | REQUEST(__count(0, 8, tlbie_instructions_issued) | |
239 | /* | |
240 | * FIXME: The spec says the offset here is 0x10, which I suspect | |
241 | * is wrong. | |
242 | */ | |
243 | __count(0x8, 8, time_spent_issuing_tlbies) | |
244 | ) | |
245 | #include I(REQUEST_END) | |
246 | ||
247 | #define REQUEST_NAME partition_instruction_count_and_time | |
248 | #define REQUEST_NUM 0x100 | |
249 | #define REQUEST_IDX_KIND "partition_id=?" | |
250 | #include I(REQUEST_BEGIN) | |
251 | REQUEST(__field(0, 2, partition_id) | |
252 | __array(0x2, 0x6, reserved1) | |
253 | __count(0x8, 8, instructions_performed) | |
254 | __count(0x10, 8, time_collected) | |
255 | ) | |
256 | #include I(REQUEST_END) | |
257 | ||
258 | /* set_mmcrh (0x80001000) skipped, no counters */ | |
259 | /* retrieve_hpmcx (0x80002000) skipped, no counters */ | |
260 | ||
9e9f6010 | 261 | #include "req-gen/_end.h" |