[PATCH] powerpc: trivial: modify comments to refer to new location of files
[deliverable/linux.git] / arch / ppc / platforms / spruce.c
CommitLineData
1da177e4 1/*
1da177e4
LT
2 * Board and PCI setup routines for IBM Spruce
3 *
4 * Author: MontaVista Software <source@mvista.com>
5 *
6 * 2000-2004 (c) MontaVista, Software, Inc. This file is licensed under
7 * the terms of the GNU General Public License version 2. This program
8 * is licensed "as is" without any warranty of any kind, whether express
9 * or implied.
10 */
11
12#include <linux/config.h>
13#include <linux/stddef.h>
14#include <linux/kernel.h>
15#include <linux/init.h>
16#include <linux/errno.h>
17#include <linux/reboot.h>
18#include <linux/pci.h>
19#include <linux/kdev_t.h>
20#include <linux/types.h>
21#include <linux/major.h>
22#include <linux/initrd.h>
23#include <linux/console.h>
24#include <linux/delay.h>
25#include <linux/seq_file.h>
26#include <linux/ide.h>
27#include <linux/root_dev.h>
28#include <linux/serial.h>
29#include <linux/tty.h>
30#include <linux/serial_core.h>
31
32#include <asm/system.h>
33#include <asm/pgtable.h>
34#include <asm/page.h>
35#include <asm/dma.h>
36#include <asm/io.h>
37#include <asm/machdep.h>
38#include <asm/time.h>
39#include <asm/todc.h>
40#include <asm/bootinfo.h>
41#include <asm/kgdb.h>
42
43#include <syslib/cpc700.h>
44
45#include "spruce.h"
46
47static inline int
48spruce_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
49{
50 static char pci_irq_table[][4] =
51 /*
52 * PCI IDSEL/INTPIN->INTLINE
53 * A B C D
54 */
55 {
56 {23, 24, 25, 26}, /* IDSEL 1 - PCI slot 3 */
57 {24, 25, 26, 23}, /* IDSEL 2 - PCI slot 2 */
58 {25, 26, 23, 24}, /* IDSEL 3 - PCI slot 1 */
59 {26, 23, 24, 25}, /* IDSEL 4 - PCI slot 0 */
60 };
61
62 const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
63 return PCI_IRQ_TABLE_LOOKUP;
64}
65
66static void __init
67spruce_setup_hose(void)
68{
69 struct pci_controller *hose;
70
71 /* Setup hose */
72 hose = pcibios_alloc_controller();
73 if (!hose)
74 return;
75
76 hose->first_busno = 0;
77 hose->last_busno = 0xff;
78
79 pci_init_resource(&hose->io_resource,
80 SPRUCE_PCI_LOWER_IO,
81 SPRUCE_PCI_UPPER_IO,
82 IORESOURCE_IO,
83 "PCI host bridge");
84
85 pci_init_resource(&hose->mem_resources[0],
86 SPRUCE_PCI_LOWER_MEM,
87 SPRUCE_PCI_UPPER_MEM,
88 IORESOURCE_MEM,
89 "PCI host bridge");
90
91 hose->io_space.start = SPRUCE_PCI_LOWER_IO;
92 hose->io_space.end = SPRUCE_PCI_UPPER_IO;
93 hose->mem_space.start = SPRUCE_PCI_LOWER_MEM;
94 hose->mem_space.end = SPRUCE_PCI_UPPER_MEM;
95 hose->io_base_virt = (void *)SPRUCE_ISA_IO_BASE;
96
97 setup_indirect_pci(hose,
98 SPRUCE_PCI_CONFIG_ADDR,
99 SPRUCE_PCI_CONFIG_DATA);
100
101 hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
102
103 ppc_md.pci_swizzle = common_swizzle;
104 ppc_md.pci_map_irq = spruce_map_irq;
105}
106
107/*
108 * CPC700 PIC interrupt programming table
109 *
110 * First entry is the sensitivity (level/edge), second is the polarity.
111 */
112unsigned int cpc700_irq_assigns[32][2] = {
113 { 1, 1 }, /* IRQ 0: ECC Correctable Error - rising edge */
114 { 1, 1 }, /* IRQ 1: PCI Write Mem Range - rising edge */
115 { 0, 1 }, /* IRQ 2: PCI Write Command Reg - active high */
116 { 0, 1 }, /* IRQ 3: UART 0 - active high */
117 { 0, 1 }, /* IRQ 4: UART 1 - active high */
118 { 0, 1 }, /* IRQ 5: ICC 0 - active high */
119 { 0, 1 }, /* IRQ 6: ICC 1 - active high */
120 { 0, 1 }, /* IRQ 7: GPT Compare 0 - active high */
121 { 0, 1 }, /* IRQ 8: GPT Compare 1 - active high */
122 { 0, 1 }, /* IRQ 9: GPT Compare 2 - active high */
123 { 0, 1 }, /* IRQ 10: GPT Compare 3 - active high */
124 { 0, 1 }, /* IRQ 11: GPT Compare 4 - active high */
125 { 0, 1 }, /* IRQ 12: GPT Capture 0 - active high */
126 { 0, 1 }, /* IRQ 13: GPT Capture 1 - active high */
127 { 0, 1 }, /* IRQ 14: GPT Capture 2 - active high */
128 { 0, 1 }, /* IRQ 15: GPT Capture 3 - active high */
129 { 0, 1 }, /* IRQ 16: GPT Capture 4 - active high */
130 { 0, 0 }, /* IRQ 17: Reserved */
131 { 0, 0 }, /* IRQ 18: Reserved */
132 { 0, 0 }, /* IRQ 19: Reserved */
133 { 0, 1 }, /* IRQ 20: FPGA EXT_IRQ0 - active high */
134 { 1, 1 }, /* IRQ 21: Mouse - rising edge */
135 { 1, 1 }, /* IRQ 22: Keyboard - rising edge */
136 { 0, 0 }, /* IRQ 23: PCI Slot 3 - active low */
137 { 0, 0 }, /* IRQ 24: PCI Slot 2 - active low */
138 { 0, 0 }, /* IRQ 25: PCI Slot 1 - active low */
139 { 0, 0 }, /* IRQ 26: PCI Slot 0 - active low */
140};
141
142static void __init
143spruce_calibrate_decr(void)
144{
145 int freq, divisor = 4;
146
147 /* determine processor bus speed */
148 freq = SPRUCE_BUS_SPEED;
149 tb_ticks_per_jiffy = freq / HZ / divisor;
150 tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000);
151}
152
153static int
154spruce_show_cpuinfo(struct seq_file *m)
155{
156 seq_printf(m, "vendor\t\t: IBM\n");
157 seq_printf(m, "machine\t\t: Spruce\n");
158
159 return 0;
160}
161
162static void __init
163spruce_early_serial_map(void)
164{
165 u32 uart_clk;
166 struct uart_port serial_req;
167
168 if (SPRUCE_UARTCLK_IS_33M(readb(SPRUCE_FPGA_REG_A)))
169 uart_clk = SPRUCE_BAUD_33M * 16;
170 else
171 uart_clk = SPRUCE_BAUD_30M * 16;
172
173 /* Setup serial port access */
174 memset(&serial_req, 0, sizeof(serial_req));
175 serial_req.uartclk = uart_clk;
176 serial_req.irq = UART0_INT;
59a675b2 177 serial_req.flags = UPF_BOOT_AUTOCONF;
9b4a1617 178 serial_req.iotype = UPIO_MEM;
1da177e4
LT
179 serial_req.membase = (u_char *)UART0_IO_BASE;
180 serial_req.regshift = 0;
181
182#if defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG)
183 gen550_init(0, &serial_req);
184#endif
185#ifdef CONFIG_SERIAL_8250
186 if (early_serial_setup(&serial_req) != 0)
187 printk("Early serial init of port 0 failed\n");
188#endif
189
190 /* Assume early_serial_setup() doesn't modify serial_req */
191 serial_req.line = 1;
192 serial_req.irq = UART1_INT;
193 serial_req.membase = (u_char *)UART1_IO_BASE;
194
195#if defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG)
196 gen550_init(1, &serial_req);
197#endif
198#ifdef CONFIG_SERIAL_8250
199 if (early_serial_setup(&serial_req) != 0)
200 printk("Early serial init of port 1 failed\n");
201#endif
202}
203
204TODC_ALLOC();
205
206static void __init
207spruce_setup_arch(void)
208{
209 /* Setup TODC access */
210 TODC_INIT(TODC_TYPE_DS1643, 0, 0, SPRUCE_RTC_BASE_ADDR, 8);
211
212 /* init to some ~sane value until calibrate_delay() runs */
213 loops_per_jiffy = 50000000 / HZ;
214
215 /* Setup PCI host bridge */
216 spruce_setup_hose();
217
218#ifdef CONFIG_BLK_DEV_INITRD
219 if (initrd_start)
220 ROOT_DEV = Root_RAM0;
221 else
222#endif
223#ifdef CONFIG_ROOT_NFS
224 ROOT_DEV = Root_NFS;
225#else
226 ROOT_DEV = Root_SDA1;
227#endif
228
229 /* Identify the system */
230 printk(KERN_INFO "System Identification: IBM Spruce\n");
231 printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n");
232}
233
234static void
235spruce_restart(char *cmd)
236{
237 local_irq_disable();
238
239 /* SRR0 has system reset vector, SRR1 has default MSR value */
240 /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
241 __asm__ __volatile__
242 ("\n\
243 lis 3,0xfff0 \n\
244 ori 3,3,0x0100 \n\
245 mtspr 26,3 \n\
246 li 3,0 \n\
247 mtspr 27,3 \n\
248 rfi \n\
249 ");
250 for(;;);
251}
252
253static void
254spruce_power_off(void)
255{
256 for(;;);
257}
258
259static void
260spruce_halt(void)
261{
262 spruce_restart(NULL);
263}
264
265static void __init
266spruce_map_io(void)
267{
268 io_block_mapping(SPRUCE_PCI_IO_BASE, SPRUCE_PCI_PHY_IO_BASE,
269 0x08000000, _PAGE_IO);
270}
271
272/*
273 * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1.
274 */
275static __inline__ void
276spruce_set_bat(void)
277{
278 mb();
279 mtspr(SPRN_DBAT1U, 0xf8000ffe);
280 mtspr(SPRN_DBAT1L, 0xf800002a);
281 mb();
282}
283
284void __init
285platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
286 unsigned long r6, unsigned long r7)
287{
288 parse_bootinfo(find_bootinfo());
289
290 /* Map in board regs, etc. */
291 spruce_set_bat();
292
293 isa_io_base = SPRUCE_ISA_IO_BASE;
294 pci_dram_offset = SPRUCE_PCI_SYS_MEM_BASE;
295
296 ppc_md.setup_arch = spruce_setup_arch;
297 ppc_md.show_cpuinfo = spruce_show_cpuinfo;
298 ppc_md.init_IRQ = cpc700_init_IRQ;
299 ppc_md.get_irq = cpc700_get_irq;
300
301 ppc_md.setup_io_mappings = spruce_map_io;
302
303 ppc_md.restart = spruce_restart;
304 ppc_md.power_off = spruce_power_off;
305 ppc_md.halt = spruce_halt;
306
307 ppc_md.time_init = todc_time_init;
308 ppc_md.set_rtc_time = todc_set_rtc_time;
309 ppc_md.get_rtc_time = todc_get_rtc_time;
310 ppc_md.calibrate_decr = spruce_calibrate_decr;
311
312 ppc_md.nvram_read_val = todc_direct_read_val;
313 ppc_md.nvram_write_val = todc_direct_write_val;
314
315 spruce_early_serial_map();
316
317#ifdef CONFIG_SERIAL_TEXT_DEBUG
318 ppc_md.progress = gen550_progress;
319#endif /* CONFIG_SERIAL_TEXT_DEBUG */
320#ifdef CONFIG_KGDB
321 ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
322#endif
323}
This page took 0.116806 seconds and 5 git commands to generate.