Commit | Line | Data |
---|---|---|
761b6026 BB |
1 | config 64BIT |
2 | bool "64-bit kernel" if ARCH = "sparc" | |
3 | default ARCH = "sparc64" | |
4 | help | |
5 | SPARC is a family of RISC microprocessors designed and marketed by | |
6 | Sun Microsystems, incorporated. They are very widely found in Sun | |
7 | workstations and clones. | |
8 | ||
9 | Say yes to build a 64-bit kernel - formerly known as sparc64 | |
10 | Say no to build a 32-bit kernel - formerly known as sparc | |
11 | ||
35da3e39 SR |
12 | config SPARC |
13 | bool | |
14 | default y | |
7b14c647 | 15 | select OF |
3cfc535c | 16 | select OF_PROMTREE |
35da3e39 SR |
17 | select HAVE_IDE |
18 | select HAVE_OPROFILE | |
26b4c912 | 19 | select HAVE_ARCH_KGDB if !SMP || SPARC64 |
35da3e39 SR |
20 | select HAVE_ARCH_TRACEHOOK |
21 | select ARCH_WANT_OPTIONAL_GPIOLIB | |
22 | select RTC_CLASS | |
23 | select RTC_DRV_M48T59 | |
e360adbe | 24 | select HAVE_IRQ_WORK |
02f7a189 | 25 | select HAVE_DMA_ATTRS |
451d7400 | 26 | select HAVE_DMA_API_DEBUG |
46eb3b64 | 27 | select HAVE_ARCH_JUMP_LABEL |
6baa9b20 | 28 | select HAVE_GENERIC_HARDIRQS |
6baa9b20 | 29 | select GENERIC_IRQ_SHOW |
d6d04819 | 30 | select USE_GENERIC_SMP_HELPERS if SMP |
a21a2fd4 | 31 | select GENERIC_PCI_IOMAP |
d314d74c | 32 | select HAVE_NMI_WATCHDOG if SPARC64 |
e47b65b0 | 33 | select HAVE_BPF_JIT |
f0a2bc7e | 34 | select GENERIC_SMP_IDLE_THREAD |
35da3e39 | 35 | |
35da3e39 | 36 | config SPARC32 |
761b6026 | 37 | def_bool !64BIT |
aea1181b | 38 | select GENERIC_ATOMIC64 |
c6df4b17 | 39 | select CLZ_TAB |
35da3e39 | 40 | |
26b4c912 | 41 | config SPARC64 |
761b6026 | 42 | def_bool 64BIT |
5bc05308 | 43 | select ARCH_SUPPORTS_MSI |
26b4c912 | 44 | select HAVE_FUNCTION_TRACER |
9960e9e8 DM |
45 | select HAVE_FUNCTION_GRAPH_TRACER |
46 | select HAVE_FUNCTION_GRAPH_FP_TEST | |
63b75495 | 47 | select HAVE_FUNCTION_TRACE_MCOUNT_TEST |
26b4c912 SR |
48 | select HAVE_KRETPROBES |
49 | select HAVE_KPROBES | |
4a0100f7 | 50 | select HAVE_RCU_TABLE_FREE if SMP |
95f72d1e | 51 | select HAVE_MEMBLOCK |
2a4814df | 52 | select HAVE_MEMBLOCK_NODE_MAP |
67605d68 | 53 | select HAVE_SYSCALL_WRAPPERS |
9be12f9b DM |
54 | select HAVE_DYNAMIC_FTRACE |
55 | select HAVE_FTRACE_MCOUNT_RECORD | |
c658ad1b | 56 | select HAVE_SYSCALL_TRACEPOINTS |
26b4c912 SR |
57 | select RTC_DRV_CMOS |
58 | select RTC_DRV_BQ4802 | |
59 | select RTC_DRV_SUN4V | |
60 | select RTC_DRV_STARFIRE | |
cdd6c482 | 61 | select HAVE_PERF_EVENTS |
906010b2 | 62 | select PERF_USE_VMALLOC |
fcd8d4f4 | 63 | select IRQ_PREFLOW_FASTEOI |
df013ffb | 64 | select ARCH_HAVE_NMI_SAFE_CMPXCHG |
178a2960 | 65 | select HAVE_C_RECORDMCOUNT |
625d693e | 66 | select NO_BOOTMEM |
26b4c912 | 67 | |
5e538790 SR |
68 | config ARCH_DEFCONFIG |
69 | string | |
70 | default "arch/sparc/configs/sparc32_defconfig" if SPARC32 | |
71 | default "arch/sparc/configs/sparc64_defconfig" if SPARC64 | |
72 | ||
fe6875ec SR |
73 | # CONFIG_BITS can be used at source level to get 32/64 bits |
74 | config BITS | |
75 | int | |
76 | default 32 if SPARC32 | |
77 | default 64 if SPARC64 | |
5e538790 | 78 | |
26b4c912 SR |
79 | config GENERIC_CMOS_UPDATE |
80 | bool | |
f5c9c9be | 81 | default y |
26b4c912 SR |
82 | |
83 | config GENERIC_CLOCKEVENTS | |
62f08283 | 84 | def_bool y |
26b4c912 SR |
85 | |
86 | config IOMMU_HELPER | |
87 | bool | |
88 | default y if SPARC64 | |
89 | ||
26b4c912 SR |
90 | config STACKTRACE_SUPPORT |
91 | bool | |
92 | default y if SPARC64 | |
93 | ||
94 | config LOCKDEP_SUPPORT | |
95 | bool | |
96 | default y if SPARC64 | |
97 | ||
6a5726dd DM |
98 | config HAVE_LATENCYTOP_SUPPORT |
99 | bool | |
100 | default y if SPARC64 | |
101 | ||
26b4c912 SR |
102 | config AUDIT_ARCH |
103 | bool | |
7e7e93a2 | 104 | default y |
26b4c912 SR |
105 | |
106 | config HAVE_SETUP_PER_CPU_AREA | |
107 | def_bool y if SPARC64 | |
108 | ||
bcb2107f | 109 | config NEED_PER_CPU_EMBED_FIRST_CHUNK |
4fd78a5f DM |
110 | def_bool y if SPARC64 |
111 | ||
a70c6913 TH |
112 | config NEED_PER_CPU_PAGE_FIRST_CHUNK |
113 | def_bool y if SPARC64 | |
114 | ||
1da177e4 LT |
115 | config MMU |
116 | bool | |
117 | default y | |
118 | ||
1da177e4 LT |
119 | config HIGHMEM |
120 | bool | |
26b4c912 | 121 | default y if SPARC32 |
1da177e4 | 122 | |
5ac6da66 CL |
123 | config ZONE_DMA |
124 | bool | |
26b4c912 | 125 | default y if SPARC32 |
5ac6da66 | 126 | |
d15b51be FT |
127 | config NEED_DMA_MAP_STATE |
128 | def_bool y | |
129 | ||
18e98307 FT |
130 | config NEED_SG_DMA_LENGTH |
131 | def_bool y | |
132 | ||
1da177e4 LT |
133 | config GENERIC_ISA_DMA |
134 | bool | |
26b4c912 | 135 | default y if SPARC32 |
1da177e4 | 136 | |
15df0f33 DM |
137 | config GENERIC_GPIO |
138 | bool | |
139 | help | |
140 | Generic GPIO API support | |
141 | ||
0785b9dc SR |
142 | config ARCH_NO_VIRT_TO_BUS |
143 | def_bool y | |
144 | ||
6a11f75b AM |
145 | config ARCH_SUPPORTS_DEBUG_PAGEALLOC |
146 | def_bool y if SPARC64 | |
147 | ||
1da177e4 LT |
148 | source "init/Kconfig" |
149 | ||
dc52ddc0 MH |
150 | source "kernel/Kconfig.freezer" |
151 | ||
26b4c912 | 152 | menu "Processor type and features" |
1da177e4 | 153 | |
1da177e4 | 154 | config SMP |
6b7679dd | 155 | bool "Symmetric multi-processing support" |
1da177e4 LT |
156 | ---help--- |
157 | This enables support for systems with more than one CPU. If you have | |
158 | a system with only one CPU, say N. If you have a system with more | |
159 | than one CPU, say Y. | |
160 | ||
161 | If you say N here, the kernel will run on single and multiprocessor | |
162 | machines, but will use only one CPU of a multiprocessor machine. If | |
163 | you say Y here, the kernel will run on many, but not all, | |
164 | singleprocessor machines. On a singleprocessor machine, the kernel | |
165 | will run faster if you say N here. | |
166 | ||
167 | People using multiprocessor machines who say Y here should also say | |
168 | Y to "Enhanced Real Time Clock Support", below. The "Advanced Power | |
169 | Management" code will be disabled if you say Y here. | |
170 | ||
03502faa AB |
171 | See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO |
172 | available at <http://www.tldp.org/docs.html#howto>. | |
1da177e4 LT |
173 | |
174 | If you don't know what to do here, say N. | |
175 | ||
176 | config NR_CPUS | |
26b4c912 | 177 | int "Maximum number of CPUs" |
1da177e4 | 178 | depends on SMP |
26b4c912 SR |
179 | range 2 32 if SPARC32 |
180 | range 2 1024 if SPARC64 | |
181 | default 32 if SPARC32 | |
182 | default 64 if SPARC64 | |
1da177e4 | 183 | |
26b4c912 | 184 | source kernel/Kconfig.hz |
1da177e4 | 185 | |
1da177e4 LT |
186 | config RWSEM_GENERIC_SPINLOCK |
187 | bool | |
26b4c912 | 188 | default y if SPARC32 |
1da177e4 LT |
189 | |
190 | config RWSEM_XCHGADD_ALGORITHM | |
191 | bool | |
26b4c912 | 192 | default y if SPARC64 |
1da177e4 | 193 | |
d59288b7 AM |
194 | config GENERIC_HWEIGHT |
195 | bool | |
26b4c912 | 196 | default y if !ULTRA_HAS_POPULATION_COUNT |
d59288b7 | 197 | |
1da177e4 LT |
198 | config GENERIC_CALIBRATE_DELAY |
199 | bool | |
200 | default y | |
201 | ||
a08b6b79 Z |
202 | config ARCH_MAY_HAVE_PC_FDC |
203 | bool | |
204 | default y | |
205 | ||
5f81941c MH |
206 | config EMULATED_CMPXCHG |
207 | bool | |
26b4c912 | 208 | default y if SPARC32 |
5f81941c MH |
209 | help |
210 | Sparc32 does not have a CAS instruction like sparc64. cmpxchg() | |
211 | is emulated, and therefore it is not completely atomic. | |
212 | ||
d670bd4f SR |
213 | # Makefile helpers |
214 | config SPARC32_SMP | |
215 | bool | |
216 | default y | |
217 | depends on SPARC32 && SMP | |
218 | ||
219 | config SPARC64_SMP | |
220 | bool | |
221 | default y | |
222 | depends on SPARC64 && SMP | |
223 | ||
c57ec52f DM |
224 | config EARLYFB |
225 | bool "Support for early boot text console" | |
226 | default y | |
227 | depends on SPARC64 | |
228 | help | |
229 | Say Y here to enable a faster early framebuffer boot console. | |
230 | ||
26b4c912 SR |
231 | choice |
232 | prompt "Kernel page size" if SPARC64 | |
233 | default SPARC64_PAGE_SIZE_8KB | |
234 | ||
235 | config SPARC64_PAGE_SIZE_8KB | |
236 | bool "8KB" | |
237 | help | |
238 | This lets you select the page size of the kernel. | |
239 | ||
240 | 8KB and 64KB work quite well, since SPARC ELF sections | |
241 | provide for up to 64KB alignment. | |
242 | ||
243 | If you don't know what to do, choose 8KB. | |
244 | ||
245 | config SPARC64_PAGE_SIZE_64KB | |
246 | bool "64KB" | |
247 | ||
248 | endchoice | |
249 | ||
250 | config SECCOMP | |
251 | bool "Enable seccomp to safely compute untrusted bytecode" | |
252 | depends on SPARC64 && PROC_FS | |
253 | default y | |
254 | help | |
255 | This kernel feature is useful for number crunching applications | |
256 | that may need to compute untrusted bytecode during their | |
257 | execution. By using pipes or other transports made available to | |
258 | the process as file descriptors supporting the read/write | |
259 | syscalls, it's possible to isolate those applications in | |
260 | their own address space using seccomp. Once seccomp is | |
261 | enabled via /proc/<pid>/seccomp, it cannot be disabled | |
262 | and the task is only allowed to execute a few safe syscalls | |
263 | defined by each seccomp mode. | |
264 | ||
265 | If unsure, say Y. Only embedded should say N here. | |
266 | ||
267 | config HOTPLUG_CPU | |
268 | bool "Support for hot-pluggable CPUs" | |
269 | depends on SPARC64 && SMP | |
270 | select HOTPLUG | |
271 | help | |
272 | Say Y here to experiment with turning CPUs off and on. CPUs | |
273 | can be controlled through /sys/devices/system/cpu/cpu#. | |
274 | Say N if you want to disable CPU hotplug. | |
275 | ||
26b4c912 SR |
276 | source "kernel/time/Kconfig" |
277 | ||
278 | if SPARC64 | |
279 | source "drivers/cpufreq/Kconfig" | |
280 | ||
281 | config US3_FREQ | |
282 | tristate "UltraSPARC-III CPU Frequency driver" | |
283 | depends on CPU_FREQ | |
284 | select CPU_FREQ_TABLE | |
285 | help | |
286 | This adds the CPUFreq driver for UltraSPARC-III processors. | |
287 | ||
288 | For details, take a look at <file:Documentation/cpu-freq>. | |
289 | ||
290 | If in doubt, say N. | |
291 | ||
292 | config US2E_FREQ | |
293 | tristate "UltraSPARC-IIe CPU Frequency driver" | |
294 | depends on CPU_FREQ | |
295 | select CPU_FREQ_TABLE | |
296 | help | |
297 | This adds the CPUFreq driver for UltraSPARC-IIe processors. | |
298 | ||
299 | For details, take a look at <file:Documentation/cpu-freq>. | |
300 | ||
301 | If in doubt, say N. | |
302 | ||
303 | endif | |
304 | ||
305 | config US3_MC | |
306 | tristate "UltraSPARC-III Memory Controller driver" | |
307 | depends on SPARC64 | |
308 | default y | |
309 | help | |
310 | This adds a driver for the UltraSPARC-III memory controller. | |
311 | Loading this driver allows exact mnemonic strings to be | |
312 | printed in the event of a memory error, so that the faulty DIMM | |
313 | on the motherboard can be matched to the error. | |
314 | ||
315 | If in doubt, say Y, as this information can be very useful. | |
316 | ||
317 | # Global things across all Sun machines. | |
318 | config GENERIC_LOCKBREAK | |
1da177e4 LT |
319 | bool |
320 | default y | |
26b4c912 SR |
321 | depends on SPARC64 && SMP && PREEMPT |
322 | ||
323 | choice | |
324 | prompt "SPARC64 Huge TLB Page Size" | |
325 | depends on SPARC64 && HUGETLB_PAGE | |
326 | default HUGETLB_PAGE_SIZE_4MB | |
327 | ||
328 | config HUGETLB_PAGE_SIZE_4MB | |
329 | bool "4MB" | |
330 | ||
331 | config HUGETLB_PAGE_SIZE_512K | |
332 | bool "512K" | |
333 | ||
334 | config HUGETLB_PAGE_SIZE_64K | |
335 | depends on !SPARC64_PAGE_SIZE_64KB | |
336 | bool "64K" | |
337 | ||
338 | endchoice | |
339 | ||
340 | config NUMA | |
341 | bool "NUMA support" | |
342 | depends on SPARC64 && SMP | |
343 | ||
344 | config NODES_SHIFT | |
345 | int | |
346 | default "4" | |
347 | depends on NEED_MULTIPLE_NODES | |
348 | ||
349 | # Some NUMA nodes have memory ranges that span | |
350 | # other nodes. Even though a pfn is valid and | |
351 | # between a node's start and end pfns, it may not | |
352 | # reside on that node. See memmap_init_zone() | |
353 | # for details. | |
354 | config NODES_SPAN_OTHER_NODES | |
355 | def_bool y | |
356 | depends on NEED_MULTIPLE_NODES | |
357 | ||
26b4c912 SR |
358 | config ARCH_SELECT_MEMORY_MODEL |
359 | def_bool y if SPARC64 | |
360 | ||
361 | config ARCH_SPARSEMEM_ENABLE | |
362 | def_bool y if SPARC64 | |
363 | select SPARSEMEM_VMEMMAP_ENABLE | |
364 | ||
365 | config ARCH_SPARSEMEM_DEFAULT | |
366 | def_bool y if SPARC64 | |
367 | ||
368 | source "mm/Kconfig" | |
369 | ||
370 | config SCHED_SMT | |
371 | bool "SMT (Hyperthreading) scheduler support" | |
372 | depends on SPARC64 && SMP | |
373 | default y | |
374 | help | |
375 | SMT scheduler support improves the CPU scheduler's decision making | |
376 | when dealing with SPARC cpus at a cost of slightly increased overhead | |
377 | in some places. If unsure say N here. | |
378 | ||
379 | config SCHED_MC | |
380 | bool "Multi-core scheduler support" | |
381 | depends on SPARC64 && SMP | |
382 | default y | |
383 | help | |
384 | Multi-core scheduler support improves the CPU scheduler's decision | |
385 | making when dealing with multi-core CPU chips at a cost of slightly | |
386 | increased overhead in some places. If unsure say N here. | |
387 | ||
26b4c912 | 388 | source "kernel/Kconfig.preempt" |
26b4c912 SR |
389 | |
390 | config CMDLINE_BOOL | |
391 | bool "Default bootloader kernel arguments" | |
392 | depends on SPARC64 | |
393 | ||
394 | config CMDLINE | |
395 | string "Initial kernel command string" | |
396 | depends on CMDLINE_BOOL | |
397 | default "console=ttyS0,9600 root=/dev/sda1" | |
398 | help | |
399 | Say Y here if you want to be able to pass default arguments to | |
400 | the kernel. This will be overridden by the bootloader, if you | |
401 | use one (such as SILO). This is most useful if you want to boot | |
402 | a kernel from TFTP, and want default options to be available | |
403 | with having them passed on the command line. | |
404 | ||
405 | NOTE: This option WILL override the PROM bootargs setting! | |
406 | ||
407 | config SUN_PM | |
408 | bool | |
409 | default y if SPARC32 | |
1da177e4 LT |
410 | help |
411 | Enable power management and CPU standby features on supported | |
412 | SPARC platforms. | |
413 | ||
4b27e0e1 SR |
414 | config SPARC_LED |
415 | tristate "Sun4m LED driver" | |
26b4c912 | 416 | depends on SPARC32 |
4b27e0e1 SR |
417 | help |
418 | This driver toggles the front-panel LED on sun4m systems | |
419 | in a user-specifiable manner. Its state can be probed | |
420 | by reading /proc/led and its blinking mode can be changed | |
421 | via writes to /proc/led | |
422 | ||
26b4c912 SR |
423 | config SERIAL_CONSOLE |
424 | bool | |
425 | depends on SPARC32 | |
426 | default y | |
427 | ---help--- | |
428 | If you say Y here, it will be possible to use a serial port as the | |
429 | system console (the system console is the device which receives all | |
430 | kernel messages and warnings and which allows logins in single user | |
431 | mode). This could be useful if some terminal or printer is connected | |
432 | to that serial port. | |
433 | ||
434 | Even if you say Y here, the currently visible virtual console | |
435 | (/dev/tty0) will still be used as the system console by default, but | |
436 | you can alter that using a kernel command line option such as | |
437 | "console=ttyS1". (Try "man bootparam" or see the documentation of | |
438 | your boot loader (silo) about how to pass options to the kernel at | |
439 | boot time.) | |
440 | ||
441 | If you don't have a graphics card installed and you say Y here, the | |
442 | kernel will automatically use the first serial line, /dev/ttyS0, as | |
443 | system console. | |
444 | ||
445 | If unsure, say N. | |
4b27e0e1 | 446 | |
5213a780 KE |
447 | config SPARC_LEON |
448 | bool "Sparc Leon processor family" | |
449 | depends on SPARC32 | |
450 | ---help--- | |
451 | If you say Y here if you are running on a SPARC-LEON processor. | |
452 | The LEON processor is a synthesizable VHDL model of the | |
453 | SPARC-v8 standard. LEON is part of the GRLIB collection of | |
454 | IP cores that are distributed under GPL. GRLIB can be downloaded | |
455 | from www.gaisler.com. You can download a sparc-linux cross-compilation | |
456 | toolchain at www.gaisler.com. | |
457 | ||
684151a7 DH |
458 | if SPARC_LEON |
459 | menu "U-Boot options" | |
460 | ||
461 | config UBOOT_LOAD_ADDR | |
462 | hex "uImage Load Address" | |
463 | default 0x40004000 | |
464 | ---help--- | |
465 | U-Boot kernel load address, the address in physical address space | |
466 | where u-boot will place the Linux kernel before booting it. | |
467 | This address is normally the base address of main memory + 0x4000. | |
468 | ||
469 | config UBOOT_FLASH_ADDR | |
470 | hex "uImage.o Load Address" | |
471 | default 0x00080000 | |
472 | ---help--- | |
473 | Optional setting only affecting the uImage.o ELF-image used to | |
474 | download the uImage file to the target using a ELF-loader other than | |
475 | U-Boot. It may for example be used to download an uImage to FLASH with | |
476 | the GRMON utility before even starting u-boot. | |
477 | ||
478 | config UBOOT_ENTRY_ADDR | |
479 | hex "uImage Entry Address" | |
480 | default 0xf0004000 | |
481 | ---help--- | |
482 | Do not change this unless you know what you're doing. This is | |
483 | hardcoded by the SPARC32 and LEON port. | |
484 | ||
485 | This is the virtual address u-boot jumps to when booting the Linux | |
486 | Kernel. | |
487 | ||
488 | endmenu | |
489 | endif | |
490 | ||
4b27e0e1 SR |
491 | endmenu |
492 | ||
493 | menu "Bus options (PCI etc.)" | |
4b27e0e1 SR |
494 | config SBUS |
495 | bool | |
496 | default y | |
497 | ||
498 | config SBUSCHAR | |
499 | bool | |
500 | default y | |
501 | ||
26b4c912 SR |
502 | config SUN_LDOMS |
503 | bool "Sun Logical Domains support" | |
504 | depends on SPARC64 | |
505 | help | |
506 | Say Y here is you want to support virtual devices via | |
507 | Logical Domains. | |
508 | ||
1da177e4 LT |
509 | config PCI |
510 | bool "Support for PCI and PS/2 keyboard/mouse" | |
511 | help | |
26b4c912 SR |
512 | Find out whether your system includes a PCI bus. PCI is the name of |
513 | a bus system, i.e. the way the CPU talks to the other stuff inside | |
514 | your box. If you say Y here, the kernel will include drivers and | |
515 | infrastructure code to support PCI bus devices. | |
516 | ||
1da177e4 LT |
517 | CONFIG_PCI is needed for all JavaStation's (including MrCoffee), |
518 | CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC. | |
519 | All of these platforms are extremely obscure, so say N if unsure. | |
520 | ||
26b4c912 SR |
521 | config PCI_DOMAINS |
522 | def_bool PCI if SPARC64 | |
523 | ||
36e23590 MW |
524 | config PCI_SYSCALL |
525 | def_bool PCI | |
526 | ||
cfe3af5d DH |
527 | config PCIC_PCI |
528 | bool | |
8c47f8d0 | 529 | depends on PCI && SPARC32 && !SPARC_LEON |
cfe3af5d DH |
530 | default y |
531 | ||
26893c13 DH |
532 | config LEON_PCI |
533 | bool | |
534 | depends on PCI && SPARC_LEON | |
535 | default y | |
536 | ||
5d07b786 DH |
537 | config GRPCI2 |
538 | bool "GRPCI2 Host Bridge Support" | |
539 | depends on LEON_PCI | |
540 | default y | |
541 | help | |
542 | Say Y here to include the GRPCI2 Host Bridge Driver. | |
543 | ||
1da177e4 LT |
544 | source "drivers/pci/Kconfig" |
545 | ||
c6afec5e DM |
546 | source "drivers/pcmcia/Kconfig" |
547 | ||
1da177e4 LT |
548 | config SUN_OPENPROMFS |
549 | tristate "Openprom tree appears in /proc/openprom" | |
550 | help | |
551 | If you say Y, the OpenPROM device tree will be available as a | |
552 | virtual file system, which you can mount to /proc/openprom by "mount | |
553 | -t openpromfs none /proc/openprom". | |
554 | ||
555 | To compile the /proc/openprom support as a module, choose M here: the | |
556 | module will be called openpromfs. | |
557 | ||
558 | Only choose N if you know in advance that you will not need to modify | |
559 | OpenPROM settings on the running system. | |
560 | ||
1cb85e80 | 561 | # Makefile helper |
d670bd4f SR |
562 | config SPARC64_PCI |
563 | bool | |
564 | default y | |
565 | depends on SPARC64 && PCI | |
30aaa808 WLII |
566 | |
567 | endmenu | |
568 | ||
12e271a8 SR |
569 | menu "Executable file formats" |
570 | ||
571 | source "fs/Kconfig.binfmt" | |
572 | ||
26b4c912 SR |
573 | config COMPAT |
574 | bool | |
575 | depends on SPARC64 | |
576 | default y | |
577 | select COMPAT_BINFMT_ELF | |
48b25c43 | 578 | select ARCH_WANT_OLD_COMPAT_IPC |
26b4c912 SR |
579 | |
580 | config SYSVIPC_COMPAT | |
581 | bool | |
582 | depends on COMPAT && SYSVIPC | |
583 | default y | |
584 | ||
45de6767 DH |
585 | config KEYS_COMPAT |
586 | def_bool y if COMPAT && KEYS | |
587 | ||
12e271a8 SR |
588 | endmenu |
589 | ||
d5950b43 SR |
590 | source "net/Kconfig" |
591 | ||
30aaa808 | 592 | source "drivers/Kconfig" |
1da177e4 | 593 | |
1da177e4 | 594 | source "drivers/sbus/char/Kconfig" |
1da177e4 | 595 | |
1da177e4 LT |
596 | source "fs/Kconfig" |
597 | ||
1da177e4 LT |
598 | source "arch/sparc/Kconfig.debug" |
599 | ||
600 | source "security/Kconfig" | |
601 | ||
602 | source "crypto/Kconfig" | |
603 | ||
604 | source "lib/Kconfig" |