Commit | Line | Data |
---|---|---|
5d07b786 DH |
1 | /* |
2 | * leon_pci_grpci2.c: GRPCI2 Host PCI driver | |
3 | * | |
4 | * Copyright (C) 2011 Aeroflex Gaisler AB, Daniel Hellstrom | |
5 | * | |
6 | */ | |
7 | ||
8 | #include <linux/of_device.h> | |
9 | #include <linux/kernel.h> | |
10 | #include <linux/pci.h> | |
d6250ee2 | 11 | #include <linux/slab.h> |
5d07b786 | 12 | #include <linux/delay.h> |
066bcaca | 13 | #include <linux/export.h> |
5d07b786 DH |
14 | #include <asm/io.h> |
15 | #include <asm/leon.h> | |
16 | #include <asm/vaddrs.h> | |
17 | #include <asm/sections.h> | |
18 | #include <asm/leon_pci.h> | |
19 | ||
20 | #include "irq.h" | |
21 | ||
22 | struct grpci2_barcfg { | |
23 | unsigned long pciadr; /* PCI Space Address */ | |
24 | unsigned long ahbadr; /* PCI Base address mapped to this AHB addr */ | |
25 | }; | |
26 | ||
27 | /* Device Node Configuration options: | |
28 | * - barcfgs : Custom Configuration of Host's 6 target BARs | |
29 | * - irq_mask : Limit which PCI interrupts are enabled | |
30 | * - do_reset : Force PCI Reset on startup | |
31 | * | |
32 | * barcfgs | |
33 | * ======= | |
34 | * | |
35 | * Optional custom Target BAR configuration (see struct grpci2_barcfg). All | |
36 | * addresses are physical. Array always contains 6 elements (len=2*4*6 bytes) | |
37 | * | |
38 | * -1 means not configured (let host driver do default setup). | |
39 | * | |
40 | * [i*2+0] = PCI Address of BAR[i] on target interface | |
41 | * [i*2+1] = Accessing PCI address of BAR[i] result in this AMBA address | |
42 | * | |
43 | * | |
44 | * irq_mask | |
45 | * ======== | |
46 | * | |
47 | * Limit which PCI interrupts are enabled. 0=Disable, 1=Enable. By default | |
48 | * all are enabled. Use this when PCI interrupt pins are floating on PCB. | |
49 | * int, len=4. | |
50 | * bit0 = PCI INTA# | |
51 | * bit1 = PCI INTB# | |
52 | * bit2 = PCI INTC# | |
53 | * bit3 = PCI INTD# | |
54 | * | |
55 | * | |
56 | * reset | |
57 | * ===== | |
58 | * | |
59 | * Force PCI reset on startup. int, len=4 | |
60 | */ | |
61 | ||
62 | /* Enable Debugging Configuration Space Access */ | |
63 | #undef GRPCI2_DEBUG_CFGACCESS | |
64 | ||
65 | /* | |
66 | * GRPCI2 APB Register MAP | |
67 | */ | |
68 | struct grpci2_regs { | |
69 | unsigned int ctrl; /* 0x00 Control */ | |
70 | unsigned int sts_cap; /* 0x04 Status / Capabilities */ | |
71 | int res1; /* 0x08 */ | |
72 | unsigned int io_map; /* 0x0C I/O Map address */ | |
73 | unsigned int dma_ctrl; /* 0x10 DMA */ | |
74 | unsigned int dma_bdbase; /* 0x14 DMA */ | |
75 | int res2[2]; /* 0x18 */ | |
76 | unsigned int bars[6]; /* 0x20 read-only PCI BARs */ | |
77 | int res3[2]; /* 0x38 */ | |
78 | unsigned int ahbmst_map[16]; /* 0x40 AHB->PCI Map per AHB Master */ | |
79 | ||
80 | /* PCI Trace Buffer Registers (OPTIONAL) */ | |
81 | unsigned int t_ctrl; /* 0x80 */ | |
82 | unsigned int t_cnt; /* 0x84 */ | |
83 | unsigned int t_adpat; /* 0x88 */ | |
84 | unsigned int t_admask; /* 0x8C */ | |
85 | unsigned int t_sigpat; /* 0x90 */ | |
86 | unsigned int t_sigmask; /* 0x94 */ | |
87 | unsigned int t_adstate; /* 0x98 */ | |
88 | unsigned int t_sigstate; /* 0x9C */ | |
89 | }; | |
90 | ||
91 | #define REGLOAD(a) (be32_to_cpu(__raw_readl(&(a)))) | |
92 | #define REGSTORE(a, v) (__raw_writel(cpu_to_be32(v), &(a))) | |
93 | ||
94 | #define CTRL_BUS_BIT 16 | |
95 | ||
96 | #define CTRL_RESET (1<<31) | |
97 | #define CTRL_SI (1<<27) | |
98 | #define CTRL_PE (1<<26) | |
99 | #define CTRL_EI (1<<25) | |
100 | #define CTRL_ER (1<<24) | |
101 | #define CTRL_BUS (0xff<<CTRL_BUS_BIT) | |
102 | #define CTRL_HOSTINT 0xf | |
103 | ||
104 | #define STS_HOST_BIT 31 | |
105 | #define STS_MST_BIT 30 | |
106 | #define STS_TAR_BIT 29 | |
107 | #define STS_DMA_BIT 28 | |
108 | #define STS_DI_BIT 27 | |
109 | #define STS_HI_BIT 26 | |
110 | #define STS_IRQMODE_BIT 24 | |
111 | #define STS_TRACE_BIT 23 | |
112 | #define STS_CFGERRVALID_BIT 20 | |
113 | #define STS_CFGERR_BIT 19 | |
114 | #define STS_INTTYPE_BIT 12 | |
115 | #define STS_INTSTS_BIT 8 | |
116 | #define STS_FDEPTH_BIT 2 | |
117 | #define STS_FNUM_BIT 0 | |
118 | ||
119 | #define STS_HOST (1<<STS_HOST_BIT) | |
120 | #define STS_MST (1<<STS_MST_BIT) | |
121 | #define STS_TAR (1<<STS_TAR_BIT) | |
122 | #define STS_DMA (1<<STS_DMA_BIT) | |
123 | #define STS_DI (1<<STS_DI_BIT) | |
124 | #define STS_HI (1<<STS_HI_BIT) | |
125 | #define STS_IRQMODE (0x3<<STS_IRQMODE_BIT) | |
126 | #define STS_TRACE (1<<STS_TRACE_BIT) | |
127 | #define STS_CFGERRVALID (1<<STS_CFGERRVALID_BIT) | |
128 | #define STS_CFGERR (1<<STS_CFGERR_BIT) | |
129 | #define STS_INTTYPE (0x3f<<STS_INTTYPE_BIT) | |
130 | #define STS_INTSTS (0xf<<STS_INTSTS_BIT) | |
131 | #define STS_FDEPTH (0x7<<STS_FDEPTH_BIT) | |
132 | #define STS_FNUM (0x3<<STS_FNUM_BIT) | |
133 | ||
134 | #define STS_ISYSERR (1<<17) | |
135 | #define STS_IDMA (1<<16) | |
136 | #define STS_IDMAERR (1<<15) | |
137 | #define STS_IMSTABRT (1<<14) | |
138 | #define STS_ITGTABRT (1<<13) | |
139 | #define STS_IPARERR (1<<12) | |
140 | ||
141 | #define STS_ERR_IRQ (STS_ISYSERR | STS_IMSTABRT | STS_ITGTABRT | STS_IPARERR) | |
142 | ||
143 | struct grpci2_bd_chan { | |
144 | unsigned int ctrl; /* 0x00 DMA Control */ | |
145 | unsigned int nchan; /* 0x04 Next DMA Channel Address */ | |
146 | unsigned int nbd; /* 0x08 Next Data Descriptor in chan */ | |
147 | unsigned int res; /* 0x0C Reserved */ | |
148 | }; | |
149 | ||
150 | #define BD_CHAN_EN 0x80000000 | |
151 | #define BD_CHAN_TYPE 0x00300000 | |
152 | #define BD_CHAN_BDCNT 0x0000ffff | |
153 | #define BD_CHAN_EN_BIT 31 | |
154 | #define BD_CHAN_TYPE_BIT 20 | |
155 | #define BD_CHAN_BDCNT_BIT 0 | |
156 | ||
157 | struct grpci2_bd_data { | |
158 | unsigned int ctrl; /* 0x00 DMA Data Control */ | |
159 | unsigned int pci_adr; /* 0x04 PCI Start Address */ | |
160 | unsigned int ahb_adr; /* 0x08 AHB Start address */ | |
161 | unsigned int next; /* 0x0C Next Data Descriptor in chan */ | |
162 | }; | |
163 | ||
164 | #define BD_DATA_EN 0x80000000 | |
165 | #define BD_DATA_IE 0x40000000 | |
166 | #define BD_DATA_DR 0x20000000 | |
167 | #define BD_DATA_TYPE 0x00300000 | |
168 | #define BD_DATA_ER 0x00080000 | |
169 | #define BD_DATA_LEN 0x0000ffff | |
170 | #define BD_DATA_EN_BIT 31 | |
171 | #define BD_DATA_IE_BIT 30 | |
172 | #define BD_DATA_DR_BIT 29 | |
173 | #define BD_DATA_TYPE_BIT 20 | |
174 | #define BD_DATA_ER_BIT 19 | |
175 | #define BD_DATA_LEN_BIT 0 | |
176 | ||
177 | /* GRPCI2 Capability */ | |
178 | struct grpci2_cap_first { | |
179 | unsigned int ctrl; | |
180 | unsigned int pci2ahb_map[6]; | |
181 | unsigned int ext2ahb_map; | |
182 | unsigned int io_map; | |
183 | unsigned int pcibar_size[6]; | |
184 | }; | |
185 | #define CAP9_CTRL_OFS 0 | |
186 | #define CAP9_BAR_OFS 0x4 | |
187 | #define CAP9_IOMAP_OFS 0x20 | |
188 | #define CAP9_BARSIZE_OFS 0x24 | |
189 | ||
a2956428 DH |
190 | #define TGT 256 |
191 | ||
5d07b786 DH |
192 | struct grpci2_priv { |
193 | struct leon_pci_info info; /* must be on top of this structure */ | |
3731e199 | 194 | struct grpci2_regs __iomem *regs; |
5d07b786 DH |
195 | char irq; |
196 | char irq_mode; /* IRQ Mode from CAPSTS REG */ | |
197 | char bt_enabled; | |
198 | char do_reset; | |
199 | char irq_mask; | |
200 | u32 pciid; /* PCI ID of Host */ | |
201 | unsigned char irq_map[4]; | |
202 | ||
203 | /* Virtual IRQ numbers */ | |
204 | unsigned int virq_err; | |
205 | unsigned int virq_dma; | |
206 | ||
207 | /* AHB PCI Windows */ | |
208 | unsigned long pci_area; /* MEMORY */ | |
209 | unsigned long pci_area_end; | |
210 | unsigned long pci_io; /* I/O */ | |
211 | unsigned long pci_conf; /* CONFIGURATION */ | |
212 | unsigned long pci_conf_end; | |
213 | unsigned long pci_io_va; | |
214 | ||
215 | struct grpci2_barcfg tgtbars[6]; | |
216 | }; | |
217 | ||
3731e199 SR |
218 | static DEFINE_SPINLOCK(grpci2_dev_lock); |
219 | static struct grpci2_priv *grpci2priv; | |
5d07b786 | 220 | |
3731e199 | 221 | static int grpci2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) |
5d07b786 DH |
222 | { |
223 | struct grpci2_priv *priv = dev->bus->sysdata; | |
224 | int irq_group; | |
225 | ||
226 | /* Use default IRQ decoding on PCI BUS0 according slot numbering */ | |
227 | irq_group = slot & 0x3; | |
228 | pin = ((pin - 1) + irq_group) & 0x3; | |
229 | ||
230 | return priv->irq_map[pin]; | |
231 | } | |
232 | ||
233 | static int grpci2_cfg_r32(struct grpci2_priv *priv, unsigned int bus, | |
234 | unsigned int devfn, int where, u32 *val) | |
235 | { | |
236 | unsigned int *pci_conf; | |
237 | unsigned long flags; | |
238 | u32 tmp; | |
239 | ||
240 | if (where & 0x3) | |
241 | return -EINVAL; | |
242 | ||
a2956428 DH |
243 | if (bus == 0) { |
244 | devfn += (0x8 * 6); /* start at AD16=Device0 */ | |
245 | } else if (bus == TGT) { | |
246 | bus = 0; | |
247 | devfn = 0; /* special case: bridge controller itself */ | |
248 | } | |
5d07b786 DH |
249 | |
250 | /* Select bus */ | |
251 | spin_lock_irqsave(&grpci2_dev_lock, flags); | |
252 | REGSTORE(priv->regs->ctrl, (REGLOAD(priv->regs->ctrl) & ~(0xff << 16)) | | |
253 | (bus << 16)); | |
254 | spin_unlock_irqrestore(&grpci2_dev_lock, flags); | |
255 | ||
256 | /* clear old status */ | |
257 | REGSTORE(priv->regs->sts_cap, (STS_CFGERR | STS_CFGERRVALID)); | |
258 | ||
259 | pci_conf = (unsigned int *) (priv->pci_conf | | |
260 | (devfn << 8) | (where & 0xfc)); | |
261 | tmp = LEON3_BYPASS_LOAD_PA(pci_conf); | |
262 | ||
263 | /* Wait until GRPCI2 signals that CFG access is done, it should be | |
264 | * done instantaneously unless a DMA operation is ongoing... | |
265 | */ | |
266 | while ((REGLOAD(priv->regs->sts_cap) & STS_CFGERRVALID) == 0) | |
267 | ; | |
268 | ||
269 | if (REGLOAD(priv->regs->sts_cap) & STS_CFGERR) { | |
270 | *val = 0xffffffff; | |
271 | } else { | |
272 | /* Bus always little endian (unaffected by byte-swapping) */ | |
01c6505d | 273 | *val = swab32(tmp); |
5d07b786 DH |
274 | } |
275 | ||
276 | return 0; | |
277 | } | |
278 | ||
279 | static int grpci2_cfg_r16(struct grpci2_priv *priv, unsigned int bus, | |
280 | unsigned int devfn, int where, u32 *val) | |
281 | { | |
282 | u32 v; | |
283 | int ret; | |
284 | ||
285 | if (where & 0x1) | |
286 | return -EINVAL; | |
287 | ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v); | |
288 | *val = 0xffff & (v >> (8 * (where & 0x3))); | |
289 | return ret; | |
290 | } | |
291 | ||
292 | static int grpci2_cfg_r8(struct grpci2_priv *priv, unsigned int bus, | |
293 | unsigned int devfn, int where, u32 *val) | |
294 | { | |
295 | u32 v; | |
296 | int ret; | |
297 | ||
298 | ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v); | |
299 | *val = 0xff & (v >> (8 * (where & 3))); | |
300 | ||
301 | return ret; | |
302 | } | |
303 | ||
304 | static int grpci2_cfg_w32(struct grpci2_priv *priv, unsigned int bus, | |
305 | unsigned int devfn, int where, u32 val) | |
306 | { | |
307 | unsigned int *pci_conf; | |
308 | unsigned long flags; | |
309 | ||
310 | if (where & 0x3) | |
311 | return -EINVAL; | |
312 | ||
a2956428 DH |
313 | if (bus == 0) { |
314 | devfn += (0x8 * 6); /* start at AD16=Device0 */ | |
315 | } else if (bus == TGT) { | |
316 | bus = 0; | |
317 | devfn = 0; /* special case: bridge controller itself */ | |
318 | } | |
5d07b786 DH |
319 | |
320 | /* Select bus */ | |
321 | spin_lock_irqsave(&grpci2_dev_lock, flags); | |
322 | REGSTORE(priv->regs->ctrl, (REGLOAD(priv->regs->ctrl) & ~(0xff << 16)) | | |
323 | (bus << 16)); | |
324 | spin_unlock_irqrestore(&grpci2_dev_lock, flags); | |
325 | ||
326 | /* clear old status */ | |
327 | REGSTORE(priv->regs->sts_cap, (STS_CFGERR | STS_CFGERRVALID)); | |
328 | ||
329 | pci_conf = (unsigned int *) (priv->pci_conf | | |
330 | (devfn << 8) | (where & 0xfc)); | |
01c6505d | 331 | LEON3_BYPASS_STORE_PA(pci_conf, swab32(val)); |
5d07b786 DH |
332 | |
333 | /* Wait until GRPCI2 signals that CFG access is done, it should be | |
334 | * done instantaneously unless a DMA operation is ongoing... | |
335 | */ | |
336 | while ((REGLOAD(priv->regs->sts_cap) & STS_CFGERRVALID) == 0) | |
337 | ; | |
338 | ||
339 | return 0; | |
340 | } | |
341 | ||
342 | static int grpci2_cfg_w16(struct grpci2_priv *priv, unsigned int bus, | |
343 | unsigned int devfn, int where, u32 val) | |
344 | { | |
345 | int ret; | |
346 | u32 v; | |
347 | ||
348 | if (where & 0x1) | |
349 | return -EINVAL; | |
350 | ret = grpci2_cfg_r32(priv, bus, devfn, where&~3, &v); | |
351 | if (ret) | |
352 | return ret; | |
353 | v = (v & ~(0xffff << (8 * (where & 0x3)))) | | |
354 | ((0xffff & val) << (8 * (where & 0x3))); | |
355 | return grpci2_cfg_w32(priv, bus, devfn, where & ~0x3, v); | |
356 | } | |
357 | ||
358 | static int grpci2_cfg_w8(struct grpci2_priv *priv, unsigned int bus, | |
359 | unsigned int devfn, int where, u32 val) | |
360 | { | |
361 | int ret; | |
362 | u32 v; | |
363 | ||
364 | ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v); | |
365 | if (ret != 0) | |
366 | return ret; | |
367 | v = (v & ~(0xff << (8 * (where & 0x3)))) | | |
368 | ((0xff & val) << (8 * (where & 0x3))); | |
369 | return grpci2_cfg_w32(priv, bus, devfn, where & ~0x3, v); | |
370 | } | |
371 | ||
372 | /* Read from Configuration Space. When entering here the PCI layer has taken | |
373 | * the pci_lock spinlock and IRQ is off. | |
374 | */ | |
375 | static int grpci2_read_config(struct pci_bus *bus, unsigned int devfn, | |
376 | int where, int size, u32 *val) | |
377 | { | |
378 | struct grpci2_priv *priv = grpci2priv; | |
379 | unsigned int busno = bus->number; | |
380 | int ret; | |
381 | ||
a2956428 | 382 | if (PCI_SLOT(devfn) > 15 || busno > 255) { |
5d07b786 DH |
383 | *val = ~0; |
384 | return 0; | |
385 | } | |
386 | ||
387 | switch (size) { | |
388 | case 1: | |
389 | ret = grpci2_cfg_r8(priv, busno, devfn, where, val); | |
390 | break; | |
391 | case 2: | |
392 | ret = grpci2_cfg_r16(priv, busno, devfn, where, val); | |
393 | break; | |
394 | case 4: | |
395 | ret = grpci2_cfg_r32(priv, busno, devfn, where, val); | |
396 | break; | |
397 | default: | |
398 | ret = -EINVAL; | |
399 | break; | |
400 | } | |
401 | ||
402 | #ifdef GRPCI2_DEBUG_CFGACCESS | |
403 | printk(KERN_INFO "grpci2_read_config: [%02x:%02x:%x] ofs=%d val=%x " | |
404 | "size=%d\n", busno, PCI_SLOT(devfn), PCI_FUNC(devfn), where, | |
405 | *val, size); | |
406 | #endif | |
407 | ||
408 | return ret; | |
409 | } | |
410 | ||
411 | /* Write to Configuration Space. When entering here the PCI layer has taken | |
412 | * the pci_lock spinlock and IRQ is off. | |
413 | */ | |
414 | static int grpci2_write_config(struct pci_bus *bus, unsigned int devfn, | |
415 | int where, int size, u32 val) | |
416 | { | |
417 | struct grpci2_priv *priv = grpci2priv; | |
418 | unsigned int busno = bus->number; | |
419 | ||
a2956428 | 420 | if (PCI_SLOT(devfn) > 15 || busno > 255) |
5d07b786 DH |
421 | return 0; |
422 | ||
423 | #ifdef GRPCI2_DEBUG_CFGACCESS | |
424 | printk(KERN_INFO "grpci2_write_config: [%02x:%02x:%x] ofs=%d size=%d " | |
425 | "val=%x\n", busno, PCI_SLOT(devfn), PCI_FUNC(devfn), | |
426 | where, size, val); | |
427 | #endif | |
428 | ||
429 | switch (size) { | |
430 | default: | |
431 | return -EINVAL; | |
432 | case 1: | |
433 | return grpci2_cfg_w8(priv, busno, devfn, where, val); | |
434 | case 2: | |
435 | return grpci2_cfg_w16(priv, busno, devfn, where, val); | |
436 | case 4: | |
437 | return grpci2_cfg_w32(priv, busno, devfn, where, val); | |
438 | } | |
439 | } | |
440 | ||
441 | static struct pci_ops grpci2_ops = { | |
442 | .read = grpci2_read_config, | |
443 | .write = grpci2_write_config, | |
444 | }; | |
445 | ||
446 | /* GENIRQ IRQ chip implementation for GRPCI2 irqmode=0..2. In configuration | |
447 | * 3 where all PCI Interrupts has a separate IRQ on the system IRQ controller | |
448 | * this is not needed and the standard IRQ controller can be used. | |
449 | */ | |
450 | ||
451 | static void grpci2_mask_irq(struct irq_data *data) | |
452 | { | |
453 | unsigned long flags; | |
454 | unsigned int irqidx; | |
455 | struct grpci2_priv *priv = grpci2priv; | |
456 | ||
457 | irqidx = (unsigned int)data->chip_data - 1; | |
458 | if (irqidx > 3) /* only mask PCI interrupts here */ | |
459 | return; | |
460 | ||
461 | spin_lock_irqsave(&grpci2_dev_lock, flags); | |
462 | REGSTORE(priv->regs->ctrl, REGLOAD(priv->regs->ctrl) & ~(1 << irqidx)); | |
463 | spin_unlock_irqrestore(&grpci2_dev_lock, flags); | |
464 | } | |
465 | ||
466 | static void grpci2_unmask_irq(struct irq_data *data) | |
467 | { | |
468 | unsigned long flags; | |
469 | unsigned int irqidx; | |
470 | struct grpci2_priv *priv = grpci2priv; | |
471 | ||
472 | irqidx = (unsigned int)data->chip_data - 1; | |
473 | if (irqidx > 3) /* only unmask PCI interrupts here */ | |
474 | return; | |
475 | ||
476 | spin_lock_irqsave(&grpci2_dev_lock, flags); | |
477 | REGSTORE(priv->regs->ctrl, REGLOAD(priv->regs->ctrl) | (1 << irqidx)); | |
478 | spin_unlock_irqrestore(&grpci2_dev_lock, flags); | |
479 | } | |
480 | ||
481 | static unsigned int grpci2_startup_irq(struct irq_data *data) | |
482 | { | |
483 | grpci2_unmask_irq(data); | |
484 | return 0; | |
485 | } | |
486 | ||
487 | static void grpci2_shutdown_irq(struct irq_data *data) | |
488 | { | |
489 | grpci2_mask_irq(data); | |
490 | } | |
491 | ||
492 | static struct irq_chip grpci2_irq = { | |
493 | .name = "grpci2", | |
494 | .irq_startup = grpci2_startup_irq, | |
495 | .irq_shutdown = grpci2_shutdown_irq, | |
496 | .irq_mask = grpci2_mask_irq, | |
497 | .irq_unmask = grpci2_unmask_irq, | |
498 | }; | |
499 | ||
500 | /* Handle one or multiple IRQs from the PCI core */ | |
bd0b9ac4 | 501 | static void grpci2_pci_flow_irq(struct irq_desc *desc) |
5d07b786 DH |
502 | { |
503 | struct grpci2_priv *priv = grpci2priv; | |
504 | int i, ack = 0; | |
505 | unsigned int ctrl, sts_cap, pci_ints; | |
506 | ||
507 | ctrl = REGLOAD(priv->regs->ctrl); | |
508 | sts_cap = REGLOAD(priv->regs->sts_cap); | |
509 | ||
510 | /* Error Interrupt? */ | |
511 | if (sts_cap & STS_ERR_IRQ) { | |
512 | generic_handle_irq(priv->virq_err); | |
513 | ack = 1; | |
514 | } | |
515 | ||
516 | /* PCI Interrupt? */ | |
517 | pci_ints = ((~sts_cap) >> STS_INTSTS_BIT) & ctrl & CTRL_HOSTINT; | |
518 | if (pci_ints) { | |
519 | /* Call respective PCI Interrupt handler */ | |
520 | for (i = 0; i < 4; i++) { | |
521 | if (pci_ints & (1 << i)) | |
522 | generic_handle_irq(priv->irq_map[i]); | |
523 | } | |
524 | ack = 1; | |
525 | } | |
526 | ||
527 | /* | |
528 | * Decode DMA Interrupt only when shared with Err and PCI INTX#, when | |
529 | * the DMA is a unique IRQ the DMA interrupts doesn't end up here, they | |
530 | * goes directly to DMA ISR. | |
531 | */ | |
532 | if ((priv->irq_mode == 0) && (sts_cap & (STS_IDMA | STS_IDMAERR))) { | |
533 | generic_handle_irq(priv->virq_dma); | |
534 | ack = 1; | |
535 | } | |
536 | ||
537 | /* | |
538 | * Call "first level" IRQ chip end-of-irq handler. It will ACK LEON IRQ | |
539 | * Controller, this must be done after IRQ sources have been handled to | |
540 | * avoid double IRQ generation | |
541 | */ | |
542 | if (ack) | |
543 | desc->irq_data.chip->irq_eoi(&desc->irq_data); | |
544 | } | |
545 | ||
546 | /* Create a virtual IRQ */ | |
547 | static unsigned int grpci2_build_device_irq(unsigned int irq) | |
548 | { | |
549 | unsigned int virq = 0, pil; | |
550 | ||
551 | pil = 1 << 8; | |
552 | virq = irq_alloc(irq, pil); | |
553 | if (virq == 0) | |
554 | goto out; | |
555 | ||
556 | irq_set_chip_and_handler_name(virq, &grpci2_irq, handle_simple_irq, | |
557 | "pcilvl"); | |
558 | irq_set_chip_data(virq, (void *)irq); | |
559 | ||
560 | out: | |
561 | return virq; | |
562 | } | |
563 | ||
3731e199 | 564 | static void grpci2_hw_init(struct grpci2_priv *priv) |
5d07b786 DH |
565 | { |
566 | u32 ahbadr, pciadr, bar_sz, capptr, io_map, data; | |
3731e199 | 567 | struct grpci2_regs __iomem *regs = priv->regs; |
5d07b786 DH |
568 | int i; |
569 | struct grpci2_barcfg *barcfg = priv->tgtbars; | |
570 | ||
571 | /* Reset any earlier setup */ | |
572 | if (priv->do_reset) { | |
573 | printk(KERN_INFO "GRPCI2: Resetting PCI bus\n"); | |
574 | REGSTORE(regs->ctrl, CTRL_RESET); | |
575 | ssleep(1); /* Wait for boards to settle */ | |
576 | } | |
577 | REGSTORE(regs->ctrl, 0); | |
578 | REGSTORE(regs->sts_cap, ~0); /* Clear Status */ | |
579 | REGSTORE(regs->dma_ctrl, 0); | |
580 | REGSTORE(regs->dma_bdbase, 0); | |
581 | ||
582 | /* Translate I/O accesses to 0, I/O Space always @ PCI low 64Kbytes */ | |
583 | REGSTORE(regs->io_map, REGLOAD(regs->io_map) & 0x0000ffff); | |
584 | ||
585 | /* set 1:1 mapping between AHB -> PCI memory space, for all Masters | |
586 | * Each AHB master has it's own mapping registers. Max 16 AHB masters. | |
587 | */ | |
588 | for (i = 0; i < 16; i++) | |
589 | REGSTORE(regs->ahbmst_map[i], priv->pci_area); | |
590 | ||
591 | /* Get the GRPCI2 Host PCI ID */ | |
a2956428 | 592 | grpci2_cfg_r32(priv, TGT, 0, PCI_VENDOR_ID, &priv->pciid); |
5d07b786 DH |
593 | |
594 | /* Get address to first (always defined) capability structure */ | |
a2956428 | 595 | grpci2_cfg_r8(priv, TGT, 0, PCI_CAPABILITY_LIST, &capptr); |
5d07b786 DH |
596 | |
597 | /* Enable/Disable Byte twisting */ | |
a2956428 | 598 | grpci2_cfg_r32(priv, TGT, 0, capptr+CAP9_IOMAP_OFS, &io_map); |
5d07b786 | 599 | io_map = (io_map & ~0x1) | (priv->bt_enabled ? 1 : 0); |
a2956428 | 600 | grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_IOMAP_OFS, io_map); |
5d07b786 DH |
601 | |
602 | /* Setup the Host's PCI Target BARs for other peripherals to access, | |
603 | * and do DMA to the host's memory. The target BARs can be sized and | |
604 | * enabled individually. | |
605 | * | |
606 | * User may set custom target BARs, but default is: | |
607 | * The first BARs is used to map kernel low (DMA is part of normal | |
608 | * region on sparc which is SRMMU_MAXMEM big) main memory 1:1 to the | |
609 | * PCI bus, the other BARs are disabled. We assume that the first BAR | |
610 | * is always available. | |
611 | */ | |
612 | for (i = 0; i < 6; i++) { | |
613 | if (barcfg[i].pciadr != ~0 && barcfg[i].ahbadr != ~0) { | |
614 | /* Target BARs must have the proper alignment */ | |
615 | ahbadr = barcfg[i].ahbadr; | |
616 | pciadr = barcfg[i].pciadr; | |
617 | bar_sz = ((pciadr - 1) & ~pciadr) + 1; | |
618 | } else { | |
619 | if (i == 0) { | |
620 | /* Map main memory */ | |
621 | bar_sz = 0xf0000008; /* 256MB prefetchable */ | |
622 | ahbadr = 0xf0000000 & (u32)__pa(PAGE_ALIGN( | |
623 | (unsigned long) &_end)); | |
624 | pciadr = ahbadr; | |
625 | } else { | |
626 | bar_sz = 0; | |
627 | ahbadr = 0; | |
628 | pciadr = 0; | |
629 | } | |
630 | } | |
a2956428 DH |
631 | grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_BARSIZE_OFS+i*4, |
632 | bar_sz); | |
633 | grpci2_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_0+i*4, pciadr); | |
634 | grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_BAR_OFS+i*4, ahbadr); | |
5d07b786 DH |
635 | printk(KERN_INFO " TGT BAR[%d]: 0x%08x (PCI)-> 0x%08x\n", |
636 | i, pciadr, ahbadr); | |
637 | } | |
638 | ||
639 | /* set as bus master and enable pci memory responses */ | |
a2956428 | 640 | grpci2_cfg_r32(priv, TGT, 0, PCI_COMMAND, &data); |
5d07b786 | 641 | data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); |
a2956428 | 642 | grpci2_cfg_w32(priv, TGT, 0, PCI_COMMAND, data); |
5d07b786 DH |
643 | |
644 | /* Enable Error respone (CPU-TRAP) on illegal memory access. */ | |
645 | REGSTORE(regs->ctrl, CTRL_ER | CTRL_PE); | |
646 | } | |
647 | ||
648 | static irqreturn_t grpci2_jump_interrupt(int irq, void *arg) | |
649 | { | |
650 | printk(KERN_ERR "GRPCI2: Jump IRQ happened\n"); | |
651 | return IRQ_NONE; | |
652 | } | |
653 | ||
654 | /* Handle GRPCI2 Error Interrupt */ | |
655 | static irqreturn_t grpci2_err_interrupt(int irq, void *arg) | |
656 | { | |
657 | struct grpci2_priv *priv = arg; | |
3731e199 | 658 | struct grpci2_regs __iomem *regs = priv->regs; |
5d07b786 DH |
659 | unsigned int status; |
660 | ||
661 | status = REGLOAD(regs->sts_cap); | |
662 | if ((status & STS_ERR_IRQ) == 0) | |
663 | return IRQ_NONE; | |
664 | ||
665 | if (status & STS_IPARERR) | |
666 | printk(KERN_ERR "GRPCI2: Parity Error\n"); | |
667 | ||
668 | if (status & STS_ITGTABRT) | |
669 | printk(KERN_ERR "GRPCI2: Target Abort\n"); | |
670 | ||
671 | if (status & STS_IMSTABRT) | |
672 | printk(KERN_ERR "GRPCI2: Master Abort\n"); | |
673 | ||
674 | if (status & STS_ISYSERR) | |
675 | printk(KERN_ERR "GRPCI2: System Error\n"); | |
676 | ||
677 | /* Clear handled INT TYPE IRQs */ | |
678 | REGSTORE(regs->sts_cap, status & STS_ERR_IRQ); | |
679 | ||
680 | return IRQ_HANDLED; | |
681 | } | |
682 | ||
7c9503b8 | 683 | static int grpci2_of_probe(struct platform_device *ofdev) |
5d07b786 | 684 | { |
3731e199 | 685 | struct grpci2_regs __iomem *regs; |
5d07b786 DH |
686 | struct grpci2_priv *priv; |
687 | int err, i, len; | |
688 | const int *tmp; | |
689 | unsigned int capability; | |
690 | ||
691 | if (grpci2priv) { | |
692 | printk(KERN_ERR "GRPCI2: only one GRPCI2 core supported\n"); | |
693 | return -ENODEV; | |
694 | } | |
695 | ||
696 | if (ofdev->num_resources < 3) { | |
697 | printk(KERN_ERR "GRPCI2: not enough APB/AHB resources\n"); | |
698 | return -EIO; | |
699 | } | |
700 | ||
701 | /* Find Device Address */ | |
702 | regs = of_ioremap(&ofdev->resource[0], 0, | |
703 | resource_size(&ofdev->resource[0]), | |
704 | "grlib-grpci2 regs"); | |
705 | if (regs == NULL) { | |
706 | printk(KERN_ERR "GRPCI2: ioremap failed\n"); | |
707 | return -EIO; | |
708 | } | |
709 | ||
710 | /* | |
711 | * Check that we're in Host Slot and that we can act as a Host Bridge | |
712 | * and not only as target. | |
713 | */ | |
714 | capability = REGLOAD(regs->sts_cap); | |
715 | if ((capability & STS_HOST) || !(capability & STS_MST)) { | |
716 | printk(KERN_INFO "GRPCI2: not in host system slot\n"); | |
717 | err = -EIO; | |
718 | goto err1; | |
719 | } | |
720 | ||
721 | priv = grpci2priv = kzalloc(sizeof(struct grpci2_priv), GFP_KERNEL); | |
722 | if (grpci2priv == NULL) { | |
723 | err = -ENOMEM; | |
724 | goto err1; | |
725 | } | |
5d07b786 DH |
726 | priv->regs = regs; |
727 | priv->irq = ofdev->archdata.irqs[0]; /* BASE IRQ */ | |
728 | priv->irq_mode = (capability & STS_IRQMODE) >> STS_IRQMODE_BIT; | |
729 | ||
730 | printk(KERN_INFO "GRPCI2: host found at %p, irq%d\n", regs, priv->irq); | |
731 | ||
732 | /* Byte twisting should be made configurable from kernel command line */ | |
733 | priv->bt_enabled = 1; | |
734 | ||
735 | /* Let user do custom Target BAR assignment */ | |
736 | tmp = of_get_property(ofdev->dev.of_node, "barcfg", &len); | |
737 | if (tmp && (len == 2*4*6)) | |
738 | memcpy(priv->tgtbars, tmp, 2*4*6); | |
739 | else | |
740 | memset(priv->tgtbars, -1, 2*4*6); | |
741 | ||
742 | /* Limit IRQ unmasking in irq_mode 2 and 3 */ | |
743 | tmp = of_get_property(ofdev->dev.of_node, "irq_mask", &len); | |
744 | if (tmp && (len == 4)) | |
745 | priv->do_reset = *tmp; | |
746 | else | |
747 | priv->irq_mask = 0xf; | |
748 | ||
749 | /* Optional PCI reset. Force PCI reset on startup */ | |
750 | tmp = of_get_property(ofdev->dev.of_node, "reset", &len); | |
751 | if (tmp && (len == 4)) | |
752 | priv->do_reset = *tmp; | |
753 | else | |
754 | priv->do_reset = 0; | |
755 | ||
756 | /* Find PCI Memory, I/O and Configuration Space Windows */ | |
757 | priv->pci_area = ofdev->resource[1].start; | |
758 | priv->pci_area_end = ofdev->resource[1].end+1; | |
759 | priv->pci_io = ofdev->resource[2].start; | |
760 | priv->pci_conf = ofdev->resource[2].start + 0x10000; | |
761 | priv->pci_conf_end = priv->pci_conf + 0x10000; | |
762 | priv->pci_io_va = (unsigned long)ioremap(priv->pci_io, 0x10000); | |
763 | if (!priv->pci_io_va) { | |
764 | err = -EIO; | |
765 | goto err2; | |
766 | } | |
767 | ||
768 | printk(KERN_INFO | |
769 | "GRPCI2: MEMORY SPACE [0x%08lx - 0x%08lx]\n" | |
770 | " I/O SPACE [0x%08lx - 0x%08lx]\n" | |
771 | " CONFIG SPACE [0x%08lx - 0x%08lx]\n", | |
772 | priv->pci_area, priv->pci_area_end-1, | |
773 | priv->pci_io, priv->pci_conf-1, | |
774 | priv->pci_conf, priv->pci_conf_end-1); | |
775 | ||
776 | /* | |
777 | * I/O Space resources in I/O Window mapped into Virtual Adr Space | |
778 | * We never use low 4KB because some devices seem have problems using | |
779 | * address 0. | |
780 | */ | |
781 | memset(&priv->info.io_space, 0, sizeof(struct resource)); | |
782 | priv->info.io_space.name = "GRPCI2 PCI I/O Space"; | |
783 | priv->info.io_space.start = priv->pci_io_va + 0x1000; | |
784 | priv->info.io_space.end = priv->pci_io_va + 0x10000 - 1; | |
785 | priv->info.io_space.flags = IORESOURCE_IO; | |
786 | ||
787 | /* | |
788 | * GRPCI2 has no prefetchable memory, map everything as | |
789 | * non-prefetchable memory | |
790 | */ | |
791 | memset(&priv->info.mem_space, 0, sizeof(struct resource)); | |
792 | priv->info.mem_space.name = "GRPCI2 PCI MEM Space"; | |
793 | priv->info.mem_space.start = priv->pci_area; | |
794 | priv->info.mem_space.end = priv->pci_area_end - 1; | |
795 | priv->info.mem_space.flags = IORESOURCE_MEM; | |
796 | ||
797 | if (request_resource(&iomem_resource, &priv->info.mem_space) < 0) | |
798 | goto err3; | |
799 | if (request_resource(&ioport_resource, &priv->info.io_space) < 0) | |
800 | goto err4; | |
801 | ||
aa90b694 DH |
802 | /* setup maximum supported PCI buses */ |
803 | priv->info.busn.name = "GRPCI2 busn"; | |
804 | priv->info.busn.start = 0; | |
805 | priv->info.busn.end = 255; | |
806 | ||
5d07b786 DH |
807 | grpci2_hw_init(priv); |
808 | ||
809 | /* | |
810 | * Get PCI Interrupt to System IRQ mapping and setup IRQ handling | |
811 | * Error IRQ always on PCI INTA. | |
812 | */ | |
813 | if (priv->irq_mode < 2) { | |
814 | /* All PCI interrupts are shared using the same system IRQ */ | |
815 | leon_update_virq_handling(priv->irq, grpci2_pci_flow_irq, | |
816 | "pcilvl", 0); | |
817 | ||
818 | priv->irq_map[0] = grpci2_build_device_irq(1); | |
819 | priv->irq_map[1] = grpci2_build_device_irq(2); | |
820 | priv->irq_map[2] = grpci2_build_device_irq(3); | |
821 | priv->irq_map[3] = grpci2_build_device_irq(4); | |
822 | ||
823 | priv->virq_err = grpci2_build_device_irq(5); | |
824 | if (priv->irq_mode & 1) | |
825 | priv->virq_dma = ofdev->archdata.irqs[1]; | |
826 | else | |
827 | priv->virq_dma = grpci2_build_device_irq(6); | |
828 | ||
829 | /* Enable IRQs on LEON IRQ controller */ | |
830 | err = request_irq(priv->irq, grpci2_jump_interrupt, 0, | |
831 | "GRPCI2_JUMP", priv); | |
832 | if (err) | |
833 | printk(KERN_ERR "GRPCI2: ERR IRQ request failed\n"); | |
834 | } else { | |
835 | /* All PCI interrupts have an unique IRQ interrupt */ | |
836 | for (i = 0; i < 4; i++) { | |
837 | /* Make LEON IRQ layer handle level IRQ by acking */ | |
838 | leon_update_virq_handling(ofdev->archdata.irqs[i], | |
839 | handle_fasteoi_irq, "pcilvl", | |
840 | 1); | |
841 | priv->irq_map[i] = ofdev->archdata.irqs[i]; | |
842 | } | |
843 | priv->virq_err = priv->irq_map[0]; | |
844 | if (priv->irq_mode & 1) | |
845 | priv->virq_dma = ofdev->archdata.irqs[4]; | |
846 | else | |
847 | priv->virq_dma = priv->irq_map[0]; | |
848 | ||
849 | /* Unmask all PCI interrupts, request_irq will not do that */ | |
850 | REGSTORE(regs->ctrl, REGLOAD(regs->ctrl)|(priv->irq_mask&0xf)); | |
851 | } | |
852 | ||
853 | /* Setup IRQ handler for non-configuration space access errors */ | |
854 | err = request_irq(priv->virq_err, grpci2_err_interrupt, IRQF_SHARED, | |
855 | "GRPCI2_ERR", priv); | |
856 | if (err) { | |
857 | printk(KERN_DEBUG "GRPCI2: ERR VIRQ request failed: %d\n", err); | |
858 | goto err5; | |
859 | } | |
860 | ||
861 | /* | |
862 | * Enable Error Interrupts. PCI interrupts are unmasked once request_irq | |
863 | * is called by the PCI Device drivers | |
864 | */ | |
865 | REGSTORE(regs->ctrl, REGLOAD(regs->ctrl) | CTRL_EI | CTRL_SI); | |
866 | ||
867 | /* Init common layer and scan buses */ | |
868 | priv->info.ops = &grpci2_ops; | |
869 | priv->info.map_irq = grpci2_map_irq; | |
870 | leon_pci_init(ofdev, &priv->info); | |
871 | ||
872 | return 0; | |
873 | ||
874 | err5: | |
875 | release_resource(&priv->info.io_space); | |
876 | err4: | |
877 | release_resource(&priv->info.mem_space); | |
878 | err3: | |
879 | err = -ENOMEM; | |
3731e199 | 880 | iounmap((void __iomem *)priv->pci_io_va); |
5d07b786 DH |
881 | err2: |
882 | kfree(priv); | |
883 | err1: | |
884 | of_iounmap(&ofdev->resource[0], regs, | |
885 | resource_size(&ofdev->resource[0])); | |
886 | return err; | |
887 | } | |
888 | ||
889 | static struct of_device_id grpci2_of_match[] = { | |
890 | { | |
891 | .name = "GAISLER_GRPCI2", | |
892 | }, | |
893 | { | |
894 | .name = "01_07c", | |
895 | }, | |
896 | {}, | |
897 | }; | |
898 | ||
899 | static struct platform_driver grpci2_of_driver = { | |
900 | .driver = { | |
901 | .name = "grpci2", | |
5d07b786 DH |
902 | .of_match_table = grpci2_of_match, |
903 | }, | |
904 | .probe = grpci2_of_probe, | |
905 | }; | |
906 | ||
907 | static int __init grpci2_init(void) | |
908 | { | |
909 | return platform_driver_register(&grpci2_of_driver); | |
910 | } | |
911 | ||
912 | subsys_initcall(grpci2_init); |