Commit | Line | Data |
---|---|---|
b00dc837 | 1 | /* |
1da177e4 LT |
2 | * sbus.c: UltraSparc SBUS controller support. |
3 | * | |
4 | * Copyright (C) 1999 David S. Miller (davem@redhat.com) | |
5 | */ | |
6 | ||
7 | #include <linux/kernel.h> | |
8 | #include <linux/types.h> | |
9 | #include <linux/mm.h> | |
10 | #include <linux/spinlock.h> | |
11 | #include <linux/slab.h> | |
12 | #include <linux/init.h> | |
13 | #include <linux/interrupt.h> | |
9dc69230 DM |
14 | #include <linux/of.h> |
15 | #include <linux/of_device.h> | |
1da177e4 LT |
16 | |
17 | #include <asm/page.h> | |
1da177e4 LT |
18 | #include <asm/io.h> |
19 | #include <asm/upa.h> | |
20 | #include <asm/cache.h> | |
21 | #include <asm/dma.h> | |
22 | #include <asm/irq.h> | |
25c7581b | 23 | #include <asm/prom.h> |
9dc69230 | 24 | #include <asm/oplib.h> |
1da177e4 LT |
25 | #include <asm/starfire.h> |
26 | ||
27 | #include "iommu_common.h" | |
28 | ||
1da177e4 LT |
29 | #define MAP_BASE ((u32)0xc0000000) |
30 | ||
1da177e4 LT |
31 | /* Offsets from iommu_regs */ |
32 | #define SYSIO_IOMMUREG_BASE 0x2400UL | |
33 | #define IOMMU_CONTROL (0x2400UL - 0x2400UL) /* IOMMU control register */ | |
34 | #define IOMMU_TSBBASE (0x2408UL - 0x2400UL) /* TSB base address register */ | |
35 | #define IOMMU_FLUSH (0x2410UL - 0x2400UL) /* IOMMU flush register */ | |
36 | #define IOMMU_VADIAG (0x4400UL - 0x2400UL) /* SBUS virtual address diagnostic */ | |
37 | #define IOMMU_TAGCMP (0x4408UL - 0x2400UL) /* TLB tag compare diagnostics */ | |
38 | #define IOMMU_LRUDIAG (0x4500UL - 0x2400UL) /* IOMMU LRU queue diagnostics */ | |
39 | #define IOMMU_TAGDIAG (0x4580UL - 0x2400UL) /* TLB tag diagnostics */ | |
40 | #define IOMMU_DRAMDIAG (0x4600UL - 0x2400UL) /* TLB data RAM diagnostics */ | |
41 | ||
42 | #define IOMMU_DRAM_VALID (1UL << 30UL) | |
43 | ||
1da177e4 LT |
44 | /* Offsets from strbuf_regs */ |
45 | #define SYSIO_STRBUFREG_BASE 0x2800UL | |
46 | #define STRBUF_CONTROL (0x2800UL - 0x2800UL) /* Control */ | |
47 | #define STRBUF_PFLUSH (0x2808UL - 0x2800UL) /* Page flush/invalidate */ | |
48 | #define STRBUF_FSYNC (0x2810UL - 0x2800UL) /* Flush synchronization */ | |
49 | #define STRBUF_DRAMDIAG (0x5000UL - 0x2800UL) /* data RAM diagnostic */ | |
50 | #define STRBUF_ERRDIAG (0x5400UL - 0x2800UL) /* error status diagnostics */ | |
51 | #define STRBUF_PTAGDIAG (0x5800UL - 0x2800UL) /* Page tag diagnostics */ | |
52 | #define STRBUF_LTAGDIAG (0x5900UL - 0x2800UL) /* Line tag diagnostics */ | |
53 | ||
54 | #define STRBUF_TAG_VALID 0x02UL | |
55 | ||
1da177e4 | 56 | /* Enable 64-bit DVMA mode for the given device. */ |
63237eeb | 57 | void sbus_set_sbus64(struct device *dev, int bursts) |
1da177e4 | 58 | { |
63237eeb | 59 | struct iommu *iommu = dev->archdata.iommu; |
cd4cd730 | 60 | struct platform_device *op = to_platform_device(dev); |
63237eeb | 61 | const struct linux_prom_registers *regs; |
1da177e4 | 62 | unsigned long cfg_reg; |
63237eeb | 63 | int slot; |
1da177e4 LT |
64 | u64 val; |
65 | ||
61c7a080 | 66 | regs = of_get_property(op->dev.of_node, "reg", NULL); |
63237eeb DM |
67 | if (!regs) { |
68 | printk(KERN_ERR "sbus_set_sbus64: Cannot find regs for %s\n", | |
61c7a080 | 69 | op->dev.of_node->full_name); |
63237eeb DM |
70 | return; |
71 | } | |
72 | slot = regs->which_io; | |
73 | ||
3e4d2650 | 74 | cfg_reg = iommu->write_complete_reg; |
1da177e4 LT |
75 | switch (slot) { |
76 | case 0: | |
77 | cfg_reg += 0x20UL; | |
78 | break; | |
79 | case 1: | |
80 | cfg_reg += 0x28UL; | |
81 | break; | |
82 | case 2: | |
83 | cfg_reg += 0x30UL; | |
84 | break; | |
85 | case 3: | |
86 | cfg_reg += 0x38UL; | |
87 | break; | |
88 | case 13: | |
89 | cfg_reg += 0x40UL; | |
90 | break; | |
91 | case 14: | |
92 | cfg_reg += 0x48UL; | |
93 | break; | |
94 | case 15: | |
95 | cfg_reg += 0x50UL; | |
96 | break; | |
97 | ||
98 | default: | |
99 | return; | |
100 | }; | |
101 | ||
102 | val = upa_readq(cfg_reg); | |
103 | if (val & (1UL << 14UL)) { | |
104 | /* Extended transfer mode already enabled. */ | |
105 | return; | |
106 | } | |
107 | ||
108 | val |= (1UL << 14UL); | |
109 | ||
110 | if (bursts & DMA_BURST8) | |
111 | val |= (1UL << 1UL); | |
112 | if (bursts & DMA_BURST16) | |
113 | val |= (1UL << 2UL); | |
114 | if (bursts & DMA_BURST32) | |
115 | val |= (1UL << 3UL); | |
116 | if (bursts & DMA_BURST64) | |
117 | val |= (1UL << 4UL); | |
118 | upa_writeq(val, cfg_reg); | |
119 | } | |
917c3660 | 120 | EXPORT_SYMBOL(sbus_set_sbus64); |
1da177e4 | 121 | |
1da177e4 LT |
122 | /* INO number to IMAP register offset for SYSIO external IRQ's. |
123 | * This should conform to both Sunfire/Wildfire server and Fusion | |
124 | * desktop designs. | |
125 | */ | |
ec4d18f2 DM |
126 | #define SYSIO_IMAP_SLOT0 0x2c00UL |
127 | #define SYSIO_IMAP_SLOT1 0x2c08UL | |
128 | #define SYSIO_IMAP_SLOT2 0x2c10UL | |
129 | #define SYSIO_IMAP_SLOT3 0x2c18UL | |
130 | #define SYSIO_IMAP_SCSI 0x3000UL | |
131 | #define SYSIO_IMAP_ETH 0x3008UL | |
132 | #define SYSIO_IMAP_BPP 0x3010UL | |
133 | #define SYSIO_IMAP_AUDIO 0x3018UL | |
134 | #define SYSIO_IMAP_PFAIL 0x3020UL | |
135 | #define SYSIO_IMAP_KMS 0x3028UL | |
136 | #define SYSIO_IMAP_FLPY 0x3030UL | |
137 | #define SYSIO_IMAP_SHW 0x3038UL | |
138 | #define SYSIO_IMAP_KBD 0x3040UL | |
139 | #define SYSIO_IMAP_MS 0x3048UL | |
140 | #define SYSIO_IMAP_SER 0x3050UL | |
141 | #define SYSIO_IMAP_TIM0 0x3060UL | |
142 | #define SYSIO_IMAP_TIM1 0x3068UL | |
143 | #define SYSIO_IMAP_UE 0x3070UL | |
144 | #define SYSIO_IMAP_CE 0x3078UL | |
145 | #define SYSIO_IMAP_SBERR 0x3080UL | |
146 | #define SYSIO_IMAP_PMGMT 0x3088UL | |
147 | #define SYSIO_IMAP_GFX 0x3090UL | |
148 | #define SYSIO_IMAP_EUPA 0x3098UL | |
1da177e4 LT |
149 | |
150 | #define bogon ((unsigned long) -1) | |
151 | static unsigned long sysio_irq_offsets[] = { | |
152 | /* SBUS Slot 0 --> 3, level 1 --> 7 */ | |
153 | SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, | |
154 | SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, | |
155 | SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, | |
156 | SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, | |
157 | SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, | |
158 | SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, | |
159 | SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, | |
160 | SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, | |
161 | ||
162 | /* Onboard devices (not relevant/used on SunFire). */ | |
163 | SYSIO_IMAP_SCSI, | |
164 | SYSIO_IMAP_ETH, | |
165 | SYSIO_IMAP_BPP, | |
166 | bogon, | |
167 | SYSIO_IMAP_AUDIO, | |
168 | SYSIO_IMAP_PFAIL, | |
169 | bogon, | |
170 | bogon, | |
171 | SYSIO_IMAP_KMS, | |
172 | SYSIO_IMAP_FLPY, | |
173 | SYSIO_IMAP_SHW, | |
174 | SYSIO_IMAP_KBD, | |
175 | SYSIO_IMAP_MS, | |
176 | SYSIO_IMAP_SER, | |
177 | bogon, | |
178 | bogon, | |
179 | SYSIO_IMAP_TIM0, | |
180 | SYSIO_IMAP_TIM1, | |
181 | bogon, | |
182 | bogon, | |
183 | SYSIO_IMAP_UE, | |
184 | SYSIO_IMAP_CE, | |
185 | SYSIO_IMAP_SBERR, | |
186 | SYSIO_IMAP_PMGMT, | |
187 | }; | |
188 | ||
189 | #undef bogon | |
190 | ||
84c1a13a | 191 | #define NUM_SYSIO_OFFSETS ARRAY_SIZE(sysio_irq_offsets) |
1da177e4 LT |
192 | |
193 | /* Convert Interrupt Mapping register pointer to associated | |
194 | * Interrupt Clear register pointer, SYSIO specific version. | |
195 | */ | |
196 | #define SYSIO_ICLR_UNUSED0 0x3400UL | |
ec4d18f2 DM |
197 | #define SYSIO_ICLR_SLOT0 0x3408UL |
198 | #define SYSIO_ICLR_SLOT1 0x3448UL | |
199 | #define SYSIO_ICLR_SLOT2 0x3488UL | |
200 | #define SYSIO_ICLR_SLOT3 0x34c8UL | |
1da177e4 LT |
201 | static unsigned long sysio_imap_to_iclr(unsigned long imap) |
202 | { | |
203 | unsigned long diff = SYSIO_ICLR_UNUSED0 - SYSIO_IMAP_SLOT0; | |
204 | return imap + diff; | |
205 | } | |
206 | ||
cd4cd730 | 207 | static unsigned int sbus_build_irq(struct platform_device *op, unsigned int ino) |
1da177e4 | 208 | { |
046e26a8 | 209 | struct iommu *iommu = op->dev.archdata.iommu; |
3e4d2650 | 210 | unsigned long reg_base = iommu->write_complete_reg - 0x2000UL; |
1da177e4 | 211 | unsigned long imap, iclr; |
37cdcd9e | 212 | int sbus_level = 0; |
1da177e4 LT |
213 | |
214 | imap = sysio_irq_offsets[ino]; | |
215 | if (imap == ((unsigned long)-1)) { | |
37cdcd9e DM |
216 | prom_printf("get_irq_translations: Bad SYSIO INO[%x]\n", |
217 | ino); | |
1da177e4 LT |
218 | prom_halt(); |
219 | } | |
220 | imap += reg_base; | |
221 | ||
222 | /* SYSIO inconsistency. For external SLOTS, we have to select | |
223 | * the right ICLR register based upon the lower SBUS irq level | |
224 | * bits. | |
225 | */ | |
226 | if (ino >= 0x20) { | |
227 | iclr = sysio_imap_to_iclr(imap); | |
228 | } else { | |
229 | int sbus_slot = (ino & 0x18)>>3; | |
230 | ||
231 | sbus_level = ino & 0x7; | |
232 | ||
233 | switch(sbus_slot) { | |
234 | case 0: | |
235 | iclr = reg_base + SYSIO_ICLR_SLOT0; | |
236 | break; | |
237 | case 1: | |
238 | iclr = reg_base + SYSIO_ICLR_SLOT1; | |
239 | break; | |
240 | case 2: | |
241 | iclr = reg_base + SYSIO_ICLR_SLOT2; | |
242 | break; | |
243 | default: | |
244 | case 3: | |
245 | iclr = reg_base + SYSIO_ICLR_SLOT3; | |
246 | break; | |
247 | }; | |
248 | ||
249 | iclr += ((unsigned long)sbus_level - 1UL) * 8UL; | |
250 | } | |
e18e2a00 | 251 | return build_irq(sbus_level, iclr, imap); |
1da177e4 LT |
252 | } |
253 | ||
254 | /* Error interrupt handling. */ | |
255 | #define SYSIO_UE_AFSR 0x0030UL | |
256 | #define SYSIO_UE_AFAR 0x0038UL | |
257 | #define SYSIO_UEAFSR_PPIO 0x8000000000000000UL /* Primary PIO cause */ | |
258 | #define SYSIO_UEAFSR_PDRD 0x4000000000000000UL /* Primary DVMA read cause */ | |
259 | #define SYSIO_UEAFSR_PDWR 0x2000000000000000UL /* Primary DVMA write cause */ | |
260 | #define SYSIO_UEAFSR_SPIO 0x1000000000000000UL /* Secondary PIO is cause */ | |
261 | #define SYSIO_UEAFSR_SDRD 0x0800000000000000UL /* Secondary DVMA read cause */ | |
262 | #define SYSIO_UEAFSR_SDWR 0x0400000000000000UL /* Secondary DVMA write cause*/ | |
263 | #define SYSIO_UEAFSR_RESV1 0x03ff000000000000UL /* Reserved */ | |
264 | #define SYSIO_UEAFSR_DOFF 0x0000e00000000000UL /* Doubleword Offset */ | |
265 | #define SYSIO_UEAFSR_SIZE 0x00001c0000000000UL /* Bad transfer size 2^SIZE */ | |
266 | #define SYSIO_UEAFSR_MID 0x000003e000000000UL /* UPA MID causing the fault */ | |
267 | #define SYSIO_UEAFSR_RESV2 0x0000001fffffffffUL /* Reserved */ | |
6d24c8dc | 268 | static irqreturn_t sysio_ue_handler(int irq, void *dev_id) |
1da177e4 | 269 | { |
cd4cd730 | 270 | struct platform_device *op = dev_id; |
046e26a8 | 271 | struct iommu *iommu = op->dev.archdata.iommu; |
3e4d2650 | 272 | unsigned long reg_base = iommu->write_complete_reg - 0x2000UL; |
1da177e4 LT |
273 | unsigned long afsr_reg, afar_reg; |
274 | unsigned long afsr, afar, error_bits; | |
046e26a8 | 275 | int reported, portid; |
1da177e4 LT |
276 | |
277 | afsr_reg = reg_base + SYSIO_UE_AFSR; | |
278 | afar_reg = reg_base + SYSIO_UE_AFAR; | |
279 | ||
280 | /* Latch error status. */ | |
281 | afsr = upa_readq(afsr_reg); | |
282 | afar = upa_readq(afar_reg); | |
283 | ||
284 | /* Clear primary/secondary error status bits. */ | |
285 | error_bits = afsr & | |
286 | (SYSIO_UEAFSR_PPIO | SYSIO_UEAFSR_PDRD | SYSIO_UEAFSR_PDWR | | |
287 | SYSIO_UEAFSR_SPIO | SYSIO_UEAFSR_SDRD | SYSIO_UEAFSR_SDWR); | |
288 | upa_writeq(error_bits, afsr_reg); | |
289 | ||
61c7a080 | 290 | portid = of_getintprop_default(op->dev.of_node, "portid", -1); |
046e26a8 | 291 | |
1da177e4 LT |
292 | /* Log the error. */ |
293 | printk("SYSIO[%x]: Uncorrectable ECC Error, primary error type[%s]\n", | |
046e26a8 | 294 | portid, |
1da177e4 LT |
295 | (((error_bits & SYSIO_UEAFSR_PPIO) ? |
296 | "PIO" : | |
297 | ((error_bits & SYSIO_UEAFSR_PDRD) ? | |
298 | "DVMA Read" : | |
299 | ((error_bits & SYSIO_UEAFSR_PDWR) ? | |
300 | "DVMA Write" : "???"))))); | |
301 | printk("SYSIO[%x]: DOFF[%lx] SIZE[%lx] MID[%lx]\n", | |
046e26a8 | 302 | portid, |
1da177e4 LT |
303 | (afsr & SYSIO_UEAFSR_DOFF) >> 45UL, |
304 | (afsr & SYSIO_UEAFSR_SIZE) >> 42UL, | |
305 | (afsr & SYSIO_UEAFSR_MID) >> 37UL); | |
046e26a8 DM |
306 | printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar); |
307 | printk("SYSIO[%x]: Secondary UE errors [", portid); | |
1da177e4 LT |
308 | reported = 0; |
309 | if (afsr & SYSIO_UEAFSR_SPIO) { | |
310 | reported++; | |
311 | printk("(PIO)"); | |
312 | } | |
313 | if (afsr & SYSIO_UEAFSR_SDRD) { | |
314 | reported++; | |
315 | printk("(DVMA Read)"); | |
316 | } | |
317 | if (afsr & SYSIO_UEAFSR_SDWR) { | |
318 | reported++; | |
319 | printk("(DVMA Write)"); | |
320 | } | |
321 | if (!reported) | |
322 | printk("(none)"); | |
323 | printk("]\n"); | |
324 | ||
325 | return IRQ_HANDLED; | |
326 | } | |
327 | ||
328 | #define SYSIO_CE_AFSR 0x0040UL | |
329 | #define SYSIO_CE_AFAR 0x0048UL | |
330 | #define SYSIO_CEAFSR_PPIO 0x8000000000000000UL /* Primary PIO cause */ | |
331 | #define SYSIO_CEAFSR_PDRD 0x4000000000000000UL /* Primary DVMA read cause */ | |
332 | #define SYSIO_CEAFSR_PDWR 0x2000000000000000UL /* Primary DVMA write cause */ | |
333 | #define SYSIO_CEAFSR_SPIO 0x1000000000000000UL /* Secondary PIO cause */ | |
334 | #define SYSIO_CEAFSR_SDRD 0x0800000000000000UL /* Secondary DVMA read cause */ | |
335 | #define SYSIO_CEAFSR_SDWR 0x0400000000000000UL /* Secondary DVMA write cause*/ | |
336 | #define SYSIO_CEAFSR_RESV1 0x0300000000000000UL /* Reserved */ | |
337 | #define SYSIO_CEAFSR_ESYND 0x00ff000000000000UL /* Syndrome Bits */ | |
338 | #define SYSIO_CEAFSR_DOFF 0x0000e00000000000UL /* Double Offset */ | |
339 | #define SYSIO_CEAFSR_SIZE 0x00001c0000000000UL /* Bad transfer size 2^SIZE */ | |
340 | #define SYSIO_CEAFSR_MID 0x000003e000000000UL /* UPA MID causing the fault */ | |
341 | #define SYSIO_CEAFSR_RESV2 0x0000001fffffffffUL /* Reserved */ | |
6d24c8dc | 342 | static irqreturn_t sysio_ce_handler(int irq, void *dev_id) |
1da177e4 | 343 | { |
cd4cd730 | 344 | struct platform_device *op = dev_id; |
046e26a8 | 345 | struct iommu *iommu = op->dev.archdata.iommu; |
3e4d2650 | 346 | unsigned long reg_base = iommu->write_complete_reg - 0x2000UL; |
1da177e4 LT |
347 | unsigned long afsr_reg, afar_reg; |
348 | unsigned long afsr, afar, error_bits; | |
046e26a8 | 349 | int reported, portid; |
1da177e4 LT |
350 | |
351 | afsr_reg = reg_base + SYSIO_CE_AFSR; | |
352 | afar_reg = reg_base + SYSIO_CE_AFAR; | |
353 | ||
354 | /* Latch error status. */ | |
355 | afsr = upa_readq(afsr_reg); | |
356 | afar = upa_readq(afar_reg); | |
357 | ||
358 | /* Clear primary/secondary error status bits. */ | |
359 | error_bits = afsr & | |
360 | (SYSIO_CEAFSR_PPIO | SYSIO_CEAFSR_PDRD | SYSIO_CEAFSR_PDWR | | |
361 | SYSIO_CEAFSR_SPIO | SYSIO_CEAFSR_SDRD | SYSIO_CEAFSR_SDWR); | |
362 | upa_writeq(error_bits, afsr_reg); | |
363 | ||
61c7a080 | 364 | portid = of_getintprop_default(op->dev.of_node, "portid", -1); |
046e26a8 | 365 | |
1da177e4 | 366 | printk("SYSIO[%x]: Correctable ECC Error, primary error type[%s]\n", |
046e26a8 | 367 | portid, |
1da177e4 LT |
368 | (((error_bits & SYSIO_CEAFSR_PPIO) ? |
369 | "PIO" : | |
370 | ((error_bits & SYSIO_CEAFSR_PDRD) ? | |
371 | "DVMA Read" : | |
372 | ((error_bits & SYSIO_CEAFSR_PDWR) ? | |
373 | "DVMA Write" : "???"))))); | |
374 | ||
375 | /* XXX Use syndrome and afar to print out module string just like | |
376 | * XXX UDB CE trap handler does... -DaveM | |
377 | */ | |
378 | printk("SYSIO[%x]: DOFF[%lx] ECC Syndrome[%lx] Size[%lx] MID[%lx]\n", | |
046e26a8 | 379 | portid, |
1da177e4 LT |
380 | (afsr & SYSIO_CEAFSR_DOFF) >> 45UL, |
381 | (afsr & SYSIO_CEAFSR_ESYND) >> 48UL, | |
382 | (afsr & SYSIO_CEAFSR_SIZE) >> 42UL, | |
383 | (afsr & SYSIO_CEAFSR_MID) >> 37UL); | |
046e26a8 | 384 | printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar); |
1da177e4 | 385 | |
046e26a8 | 386 | printk("SYSIO[%x]: Secondary CE errors [", portid); |
1da177e4 LT |
387 | reported = 0; |
388 | if (afsr & SYSIO_CEAFSR_SPIO) { | |
389 | reported++; | |
390 | printk("(PIO)"); | |
391 | } | |
392 | if (afsr & SYSIO_CEAFSR_SDRD) { | |
393 | reported++; | |
394 | printk("(DVMA Read)"); | |
395 | } | |
396 | if (afsr & SYSIO_CEAFSR_SDWR) { | |
397 | reported++; | |
398 | printk("(DVMA Write)"); | |
399 | } | |
400 | if (!reported) | |
401 | printk("(none)"); | |
402 | printk("]\n"); | |
403 | ||
404 | return IRQ_HANDLED; | |
405 | } | |
406 | ||
407 | #define SYSIO_SBUS_AFSR 0x2010UL | |
408 | #define SYSIO_SBUS_AFAR 0x2018UL | |
409 | #define SYSIO_SBAFSR_PLE 0x8000000000000000UL /* Primary Late PIO Error */ | |
410 | #define SYSIO_SBAFSR_PTO 0x4000000000000000UL /* Primary SBUS Timeout */ | |
411 | #define SYSIO_SBAFSR_PBERR 0x2000000000000000UL /* Primary SBUS Error ACK */ | |
412 | #define SYSIO_SBAFSR_SLE 0x1000000000000000UL /* Secondary Late PIO Error */ | |
413 | #define SYSIO_SBAFSR_STO 0x0800000000000000UL /* Secondary SBUS Timeout */ | |
414 | #define SYSIO_SBAFSR_SBERR 0x0400000000000000UL /* Secondary SBUS Error ACK */ | |
415 | #define SYSIO_SBAFSR_RESV1 0x03ff000000000000UL /* Reserved */ | |
416 | #define SYSIO_SBAFSR_RD 0x0000800000000000UL /* Primary was late PIO read */ | |
417 | #define SYSIO_SBAFSR_RESV2 0x0000600000000000UL /* Reserved */ | |
418 | #define SYSIO_SBAFSR_SIZE 0x00001c0000000000UL /* Size of transfer */ | |
419 | #define SYSIO_SBAFSR_MID 0x000003e000000000UL /* MID causing the error */ | |
420 | #define SYSIO_SBAFSR_RESV3 0x0000001fffffffffUL /* Reserved */ | |
6d24c8dc | 421 | static irqreturn_t sysio_sbus_error_handler(int irq, void *dev_id) |
1da177e4 | 422 | { |
cd4cd730 | 423 | struct platform_device *op = dev_id; |
046e26a8 | 424 | struct iommu *iommu = op->dev.archdata.iommu; |
1da177e4 LT |
425 | unsigned long afsr_reg, afar_reg, reg_base; |
426 | unsigned long afsr, afar, error_bits; | |
046e26a8 | 427 | int reported, portid; |
1da177e4 | 428 | |
3e4d2650 | 429 | reg_base = iommu->write_complete_reg - 0x2000UL; |
1da177e4 LT |
430 | afsr_reg = reg_base + SYSIO_SBUS_AFSR; |
431 | afar_reg = reg_base + SYSIO_SBUS_AFAR; | |
432 | ||
433 | afsr = upa_readq(afsr_reg); | |
434 | afar = upa_readq(afar_reg); | |
435 | ||
436 | /* Clear primary/secondary error status bits. */ | |
437 | error_bits = afsr & | |
438 | (SYSIO_SBAFSR_PLE | SYSIO_SBAFSR_PTO | SYSIO_SBAFSR_PBERR | | |
439 | SYSIO_SBAFSR_SLE | SYSIO_SBAFSR_STO | SYSIO_SBAFSR_SBERR); | |
440 | upa_writeq(error_bits, afsr_reg); | |
441 | ||
61c7a080 | 442 | portid = of_getintprop_default(op->dev.of_node, "portid", -1); |
046e26a8 | 443 | |
1da177e4 LT |
444 | /* Log the error. */ |
445 | printk("SYSIO[%x]: SBUS Error, primary error type[%s] read(%d)\n", | |
046e26a8 | 446 | portid, |
1da177e4 LT |
447 | (((error_bits & SYSIO_SBAFSR_PLE) ? |
448 | "Late PIO Error" : | |
449 | ((error_bits & SYSIO_SBAFSR_PTO) ? | |
450 | "Time Out" : | |
451 | ((error_bits & SYSIO_SBAFSR_PBERR) ? | |
452 | "Error Ack" : "???")))), | |
453 | (afsr & SYSIO_SBAFSR_RD) ? 1 : 0); | |
454 | printk("SYSIO[%x]: size[%lx] MID[%lx]\n", | |
046e26a8 | 455 | portid, |
1da177e4 LT |
456 | (afsr & SYSIO_SBAFSR_SIZE) >> 42UL, |
457 | (afsr & SYSIO_SBAFSR_MID) >> 37UL); | |
046e26a8 DM |
458 | printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar); |
459 | printk("SYSIO[%x]: Secondary SBUS errors [", portid); | |
1da177e4 LT |
460 | reported = 0; |
461 | if (afsr & SYSIO_SBAFSR_SLE) { | |
462 | reported++; | |
463 | printk("(Late PIO Error)"); | |
464 | } | |
465 | if (afsr & SYSIO_SBAFSR_STO) { | |
466 | reported++; | |
467 | printk("(Time Out)"); | |
468 | } | |
469 | if (afsr & SYSIO_SBAFSR_SBERR) { | |
470 | reported++; | |
471 | printk("(Error Ack)"); | |
472 | } | |
473 | if (!reported) | |
474 | printk("(none)"); | |
475 | printk("]\n"); | |
476 | ||
477 | /* XXX check iommu/strbuf for further error status XXX */ | |
478 | ||
479 | return IRQ_HANDLED; | |
480 | } | |
481 | ||
482 | #define ECC_CONTROL 0x0020UL | |
483 | #define SYSIO_ECNTRL_ECCEN 0x8000000000000000UL /* Enable ECC Checking */ | |
484 | #define SYSIO_ECNTRL_UEEN 0x4000000000000000UL /* Enable UE Interrupts */ | |
485 | #define SYSIO_ECNTRL_CEEN 0x2000000000000000UL /* Enable CE Interrupts */ | |
486 | ||
487 | #define SYSIO_UE_INO 0x34 | |
488 | #define SYSIO_CE_INO 0x35 | |
489 | #define SYSIO_SBUSERR_INO 0x36 | |
490 | ||
cd4cd730 | 491 | static void __init sysio_register_error_handlers(struct platform_device *op) |
1da177e4 | 492 | { |
046e26a8 | 493 | struct iommu *iommu = op->dev.archdata.iommu; |
3e4d2650 | 494 | unsigned long reg_base = iommu->write_complete_reg - 0x2000UL; |
1da177e4 LT |
495 | unsigned int irq; |
496 | u64 control; | |
046e26a8 DM |
497 | int portid; |
498 | ||
61c7a080 | 499 | portid = of_getintprop_default(op->dev.of_node, "portid", -1); |
1da177e4 | 500 | |
046e26a8 | 501 | irq = sbus_build_irq(op, SYSIO_UE_INO); |
96a496fd | 502 | if (request_irq(irq, sysio_ue_handler, 0, |
046e26a8 | 503 | "SYSIO_UE", op) < 0) { |
1da177e4 | 504 | prom_printf("SYSIO[%x]: Cannot register UE interrupt.\n", |
046e26a8 | 505 | portid); |
1da177e4 LT |
506 | prom_halt(); |
507 | } | |
508 | ||
046e26a8 | 509 | irq = sbus_build_irq(op, SYSIO_CE_INO); |
96a496fd | 510 | if (request_irq(irq, sysio_ce_handler, 0, |
046e26a8 | 511 | "SYSIO_CE", op) < 0) { |
1da177e4 | 512 | prom_printf("SYSIO[%x]: Cannot register CE interrupt.\n", |
046e26a8 | 513 | portid); |
1da177e4 LT |
514 | prom_halt(); |
515 | } | |
516 | ||
046e26a8 | 517 | irq = sbus_build_irq(op, SYSIO_SBUSERR_INO); |
96a496fd | 518 | if (request_irq(irq, sysio_sbus_error_handler, 0, |
046e26a8 | 519 | "SYSIO_SBERR", op) < 0) { |
1da177e4 | 520 | prom_printf("SYSIO[%x]: Cannot register SBUS Error interrupt.\n", |
046e26a8 | 521 | portid); |
1da177e4 LT |
522 | prom_halt(); |
523 | } | |
524 | ||
525 | /* Now turn the error interrupts on and also enable ECC checking. */ | |
526 | upa_writeq((SYSIO_ECNTRL_ECCEN | | |
527 | SYSIO_ECNTRL_UEEN | | |
528 | SYSIO_ECNTRL_CEEN), | |
529 | reg_base + ECC_CONTROL); | |
530 | ||
3e4d2650 | 531 | control = upa_readq(iommu->write_complete_reg); |
1da177e4 | 532 | control |= 0x100UL; /* SBUS Error Interrupt Enable */ |
3e4d2650 | 533 | upa_writeq(control, iommu->write_complete_reg); |
1da177e4 LT |
534 | } |
535 | ||
536 | /* Boot time initialization. */ | |
cd4cd730 | 537 | static void __init sbus_iommu_init(struct platform_device *op) |
1da177e4 | 538 | { |
6a23acf3 | 539 | const struct linux_prom64_registers *pr; |
61c7a080 | 540 | struct device_node *dp = op->dev.of_node; |
3e4d2650 DM |
541 | struct iommu *iommu; |
542 | struct strbuf *strbuf; | |
543 | unsigned long regs, reg_base; | |
046e26a8 | 544 | int i, portid; |
1da177e4 | 545 | u64 control; |
1da177e4 | 546 | |
25c7581b DM |
547 | pr = of_get_property(dp, "reg", NULL); |
548 | if (!pr) { | |
ad7ad57c DM |
549 | prom_printf("sbus_iommu_init: Cannot map SYSIO " |
550 | "control registers.\n"); | |
1da177e4 LT |
551 | prom_halt(); |
552 | } | |
25c7581b | 553 | regs = pr->phys_addr; |
1da177e4 | 554 | |
ad7ad57c DM |
555 | iommu = kzalloc(sizeof(*iommu), GFP_ATOMIC); |
556 | if (!iommu) | |
557 | goto fatal_memory_error; | |
558 | strbuf = kzalloc(sizeof(*strbuf), GFP_ATOMIC); | |
559 | if (!strbuf) | |
560 | goto fatal_memory_error; | |
1da177e4 | 561 | |
046e26a8 DM |
562 | op->dev.archdata.iommu = iommu; |
563 | op->dev.archdata.stc = strbuf; | |
564 | op->dev.archdata.numa_node = -1; | |
1da177e4 | 565 | |
3e4d2650 DM |
566 | reg_base = regs + SYSIO_IOMMUREG_BASE; |
567 | iommu->iommu_control = reg_base + IOMMU_CONTROL; | |
568 | iommu->iommu_tsbbase = reg_base + IOMMU_TSBBASE; | |
569 | iommu->iommu_flush = reg_base + IOMMU_FLUSH; | |
ad7ad57c DM |
570 | iommu->iommu_tags = iommu->iommu_control + |
571 | (IOMMU_TAGDIAG - IOMMU_CONTROL); | |
1da177e4 | 572 | |
3e4d2650 DM |
573 | reg_base = regs + SYSIO_STRBUFREG_BASE; |
574 | strbuf->strbuf_control = reg_base + STRBUF_CONTROL; | |
575 | strbuf->strbuf_pflush = reg_base + STRBUF_PFLUSH; | |
576 | strbuf->strbuf_fsync = reg_base + STRBUF_FSYNC; | |
577 | ||
578 | strbuf->strbuf_enabled = 1; | |
1da177e4 | 579 | |
3e4d2650 DM |
580 | strbuf->strbuf_flushflag = (volatile unsigned long *) |
581 | ((((unsigned long)&strbuf->__flushflag_buf[0]) | |
582 | + 63UL) | |
583 | & ~63UL); | |
584 | strbuf->strbuf_flushflag_pa = (unsigned long) | |
585 | __pa(strbuf->strbuf_flushflag); | |
1da177e4 LT |
586 | |
587 | /* The SYSIO SBUS control register is used for dummy reads | |
588 | * in order to ensure write completion. | |
589 | */ | |
3e4d2650 | 590 | iommu->write_complete_reg = regs + 0x2000UL; |
1da177e4 | 591 | |
61c7a080 | 592 | portid = of_getintprop_default(op->dev.of_node, "portid", -1); |
046e26a8 DM |
593 | printk(KERN_INFO "SYSIO: UPA portID %x, at %016lx\n", |
594 | portid, regs); | |
1da177e4 LT |
595 | |
596 | /* Setup for TSB_SIZE=7, TBW_SIZE=0, MMU_DE=1, MMU_EN=1 */ | |
c1b1a5f1 | 597 | if (iommu_table_init(iommu, IO_TSB_SIZE, MAP_BASE, 0xffffffff, -1)) |
ad7ad57c | 598 | goto fatal_memory_error; |
2f3a2efd | 599 | |
3e4d2650 | 600 | control = upa_readq(iommu->iommu_control); |
1da177e4 LT |
601 | control = ((7UL << 16UL) | |
602 | (0UL << 2UL) | | |
603 | (1UL << 1UL) | | |
604 | (1UL << 0UL)); | |
3e4d2650 | 605 | upa_writeq(control, iommu->iommu_control); |
1da177e4 LT |
606 | |
607 | /* Clean out any cruft in the IOMMU using | |
608 | * diagnostic accesses. | |
609 | */ | |
610 | for (i = 0; i < 16; i++) { | |
3e4d2650 DM |
611 | unsigned long dram, tag; |
612 | ||
613 | dram = iommu->iommu_control + (IOMMU_DRAMDIAG - IOMMU_CONTROL); | |
614 | tag = iommu->iommu_control + (IOMMU_TAGDIAG - IOMMU_CONTROL); | |
1da177e4 LT |
615 | |
616 | dram += (unsigned long)i * 8UL; | |
617 | tag += (unsigned long)i * 8UL; | |
618 | upa_writeq(0, dram); | |
619 | upa_writeq(0, tag); | |
620 | } | |
3e4d2650 | 621 | upa_readq(iommu->write_complete_reg); |
1da177e4 LT |
622 | |
623 | /* Give the TSB to SYSIO. */ | |
3e4d2650 | 624 | upa_writeq(__pa(iommu->page_table), iommu->iommu_tsbbase); |
1da177e4 LT |
625 | |
626 | /* Setup streaming buffer, DE=1 SB_EN=1 */ | |
627 | control = (1UL << 1UL) | (1UL << 0UL); | |
3e4d2650 | 628 | upa_writeq(control, strbuf->strbuf_control); |
1da177e4 LT |
629 | |
630 | /* Clear out the tags using diagnostics. */ | |
631 | for (i = 0; i < 16; i++) { | |
632 | unsigned long ptag, ltag; | |
633 | ||
3e4d2650 DM |
634 | ptag = strbuf->strbuf_control + |
635 | (STRBUF_PTAGDIAG - STRBUF_CONTROL); | |
636 | ltag = strbuf->strbuf_control + | |
637 | (STRBUF_LTAGDIAG - STRBUF_CONTROL); | |
1da177e4 LT |
638 | ptag += (unsigned long)i * 8UL; |
639 | ltag += (unsigned long)i * 8UL; | |
640 | ||
641 | upa_writeq(0UL, ptag); | |
642 | upa_writeq(0UL, ltag); | |
643 | } | |
644 | ||
645 | /* Enable DVMA arbitration for all devices/slots. */ | |
3e4d2650 | 646 | control = upa_readq(iommu->write_complete_reg); |
1da177e4 | 647 | control |= 0x3fUL; |
3e4d2650 | 648 | upa_writeq(control, iommu->write_complete_reg); |
1da177e4 LT |
649 | |
650 | /* Now some Xfire specific grot... */ | |
651 | if (this_is_starfire) | |
046e26a8 | 652 | starfire_hookup(portid); |
1da177e4 | 653 | |
046e26a8 | 654 | sysio_register_error_handlers(op); |
ad7ad57c DM |
655 | return; |
656 | ||
657 | fatal_memory_error: | |
658 | prom_printf("sbus_iommu_init: Fatal memory allocation error.\n"); | |
1da177e4 | 659 | } |
8fae097d | 660 | |
046e26a8 | 661 | static int __init sbus_init(void) |
576c352e | 662 | { |
046e26a8 DM |
663 | struct device_node *dp; |
664 | ||
665 | for_each_node_by_name(dp, "sbus") { | |
cd4cd730 | 666 | struct platform_device *op = of_find_device_by_node(dp); |
046e26a8 DM |
667 | |
668 | sbus_iommu_init(op); | |
669 | of_propagate_archdata(op); | |
670 | } | |
576c352e | 671 | |
046e26a8 | 672 | return 0; |
576c352e | 673 | } |
046e26a8 DM |
674 | |
675 | subsys_initcall(sbus_init); |