Commit | Line | Data |
---|---|---|
62607313 PA |
1 | /* |
2 | * header.S | |
3 | * | |
4 | * Copyright (C) 1991, 1992 Linus Torvalds | |
5 | * | |
6 | * Based on bootsect.S and setup.S | |
7 | * modified by more people than can be counted | |
8 | * | |
9 | * Rewritten as a common file by H. Peter Anvin (Apr 2007) | |
10 | * | |
11 | * BIG FAT NOTE: We're in real mode using 64k segments. Therefore segment | |
12 | * addresses must be multiplied by 16 to obtain their respective linear | |
13 | * addresses. To avoid confusion, linear addresses are written using leading | |
14 | * hex while segment addresses are written as segment:offset. | |
15 | * | |
16 | */ | |
17 | ||
18 | #include <asm/segment.h> | |
273b281f | 19 | #include <generated/utsrelease.h> |
62607313 PA |
20 | #include <asm/boot.h> |
21 | #include <asm/e820.h> | |
0341c14d | 22 | #include <asm/page_types.h> |
62607313 | 23 | #include <asm/setup.h> |
09c205af | 24 | #include <asm/bootparam.h> |
62607313 | 25 | #include "boot.h" |
77d1a499 PA |
26 | #include "voffset.h" |
27 | #include "zoffset.h" | |
62607313 | 28 | |
62607313 | 29 | BOOTSEG = 0x07C0 /* original address of boot-sector */ |
5e47c478 | 30 | SYSSEG = 0x1000 /* historical load address >> 4 */ |
62607313 PA |
31 | |
32 | #ifndef SVGA_MODE | |
33 | #define SVGA_MODE ASK_VGA | |
34 | #endif | |
35 | ||
62607313 PA |
36 | #ifndef ROOT_RDONLY |
37 | #define ROOT_RDONLY 1 | |
38 | #endif | |
39 | ||
40 | .code16 | |
41 | .section ".bstext", "ax" | |
42 | ||
43 | .global bootsect_start | |
44 | bootsect_start: | |
291f3632 MF |
45 | #ifdef CONFIG_EFI_STUB |
46 | # "MZ", MS-DOS header | |
47 | .byte 0x4d | |
48 | .byte 0x5a | |
49 | #endif | |
62607313 PA |
50 | |
51 | # Normalize the start address | |
52 | ljmp $BOOTSEG, $start2 | |
53 | ||
54 | start2: | |
55 | movw %cs, %ax | |
56 | movw %ax, %ds | |
57 | movw %ax, %es | |
58 | movw %ax, %ss | |
59 | xorw %sp, %sp | |
60 | sti | |
61 | cld | |
62 | ||
63 | movw $bugger_off_msg, %si | |
64 | ||
65 | msg_loop: | |
66 | lodsb | |
67 | andb %al, %al | |
68 | jz bs_die | |
69 | movb $0xe, %ah | |
70 | movw $7, %bx | |
71 | int $0x10 | |
72 | jmp msg_loop | |
73 | ||
74 | bs_die: | |
75 | # Allow the user to press a key, then reboot | |
76 | xorw %ax, %ax | |
77 | int $0x16 | |
78 | int $0x19 | |
79 | ||
80 | # int 0x19 should never return. In case it does anyway, | |
81 | # invoke the BIOS reset code... | |
82 | ljmp $0xf000,$0xfff0 | |
83 | ||
291f3632 MF |
84 | #ifdef CONFIG_EFI_STUB |
85 | .org 0x3c | |
86 | # | |
87 | # Offset to the PE header. | |
88 | # | |
89 | .long pe_header | |
90 | #endif /* CONFIG_EFI_STUB */ | |
91 | ||
62607313 PA |
92 | .section ".bsdata", "a" |
93 | bugger_off_msg: | |
743628e8 JJ |
94 | .ascii "Direct floppy boot is not supported. " |
95 | .ascii "Use a boot loader program instead.\r\n" | |
62607313 | 96 | .ascii "\n" |
743628e8 | 97 | .ascii "Remove disk and press any key to reboot ...\r\n" |
62607313 PA |
98 | .byte 0 |
99 | ||
291f3632 MF |
100 | #ifdef CONFIG_EFI_STUB |
101 | pe_header: | |
102 | .ascii "PE" | |
103 | .word 0 | |
104 | ||
105 | coff_header: | |
106 | #ifdef CONFIG_X86_32 | |
107 | .word 0x14c # i386 | |
108 | #else | |
109 | .word 0x8664 # x86-64 | |
110 | #endif | |
743628e8 | 111 | .word 3 # nr_sections |
291f3632 MF |
112 | .long 0 # TimeDateStamp |
113 | .long 0 # PointerToSymbolTable | |
114 | .long 1 # NumberOfSymbols | |
115 | .word section_table - optional_header # SizeOfOptionalHeader | |
116 | #ifdef CONFIG_X86_32 | |
117 | .word 0x306 # Characteristics. | |
118 | # IMAGE_FILE_32BIT_MACHINE | | |
119 | # IMAGE_FILE_DEBUG_STRIPPED | | |
120 | # IMAGE_FILE_EXECUTABLE_IMAGE | | |
121 | # IMAGE_FILE_LINE_NUMS_STRIPPED | |
122 | #else | |
123 | .word 0x206 # Characteristics | |
124 | # IMAGE_FILE_DEBUG_STRIPPED | | |
125 | # IMAGE_FILE_EXECUTABLE_IMAGE | | |
126 | # IMAGE_FILE_LINE_NUMS_STRIPPED | |
127 | #endif | |
128 | ||
129 | optional_header: | |
130 | #ifdef CONFIG_X86_32 | |
131 | .word 0x10b # PE32 format | |
132 | #else | |
133 | .word 0x20b # PE32+ format | |
134 | #endif | |
135 | .byte 0x02 # MajorLinkerVersion | |
136 | .byte 0x14 # MinorLinkerVersion | |
137 | ||
138 | # Filled in by build.c | |
139 | .long 0 # SizeOfCode | |
140 | ||
141 | .long 0 # SizeOfInitializedData | |
142 | .long 0 # SizeOfUninitializedData | |
143 | ||
144 | # Filled in by build.c | |
145 | .long 0x0000 # AddressOfEntryPoint | |
146 | ||
e31be363 | 147 | .long 0x0200 # BaseOfCode |
291f3632 MF |
148 | #ifdef CONFIG_X86_32 |
149 | .long 0 # data | |
150 | #endif | |
151 | ||
152 | extra_header_fields: | |
153 | #ifdef CONFIG_X86_32 | |
154 | .long 0 # ImageBase | |
155 | #else | |
156 | .quad 0 # ImageBase | |
157 | #endif | |
743628e8 JJ |
158 | .long 0x20 # SectionAlignment |
159 | .long 0x20 # FileAlignment | |
291f3632 MF |
160 | .word 0 # MajorOperatingSystemVersion |
161 | .word 0 # MinorOperatingSystemVersion | |
162 | .word 0 # MajorImageVersion | |
163 | .word 0 # MinorImageVersion | |
164 | .word 0 # MajorSubsystemVersion | |
165 | .word 0 # MinorSubsystemVersion | |
166 | .long 0 # Win32VersionValue | |
167 | ||
168 | # | |
169 | # The size of the bzImage is written in tools/build.c | |
170 | # | |
171 | .long 0 # SizeOfImage | |
172 | ||
173 | .long 0x200 # SizeOfHeaders | |
174 | .long 0 # CheckSum | |
175 | .word 0xa # Subsystem (EFI application) | |
176 | .word 0 # DllCharacteristics | |
177 | #ifdef CONFIG_X86_32 | |
178 | .long 0 # SizeOfStackReserve | |
179 | .long 0 # SizeOfStackCommit | |
180 | .long 0 # SizeOfHeapReserve | |
181 | .long 0 # SizeOfHeapCommit | |
182 | #else | |
183 | .quad 0 # SizeOfStackReserve | |
184 | .quad 0 # SizeOfStackCommit | |
185 | .quad 0 # SizeOfHeapReserve | |
186 | .quad 0 # SizeOfHeapCommit | |
187 | #endif | |
188 | .long 0 # LoaderFlags | |
e47bb0bd | 189 | .long 0x6 # NumberOfRvaAndSizes |
291f3632 MF |
190 | |
191 | .quad 0 # ExportTable | |
192 | .quad 0 # ImportTable | |
193 | .quad 0 # ResourceTable | |
194 | .quad 0 # ExceptionTable | |
195 | .quad 0 # CertificationTable | |
196 | .quad 0 # BaseRelocationTable | |
197 | ||
198 | # Section table | |
199 | section_table: | |
743628e8 JJ |
200 | # |
201 | # The offset & size fields are filled in by build.c. | |
202 | # | |
203 | .ascii ".setup" | |
291f3632 MF |
204 | .byte 0 |
205 | .byte 0 | |
206 | .long 0 | |
207 | .long 0x0 # startup_{32,64} | |
208 | .long 0 # Size of initialized data | |
209 | # on disk | |
210 | .long 0x0 # startup_{32,64} | |
211 | .long 0 # PointerToRelocations | |
212 | .long 0 # PointerToLineNumbers | |
213 | .word 0 # NumberOfRelocations | |
214 | .word 0 # NumberOfLineNumbers | |
215 | .long 0x60500020 # Characteristics (section flags) | |
216 | ||
217 | # | |
218 | # The EFI application loader requires a relocation section | |
743628e8 JJ |
219 | # because EFI applications must be relocatable. The .reloc |
220 | # offset & size fields are filled in by build.c. | |
291f3632 MF |
221 | # |
222 | .ascii ".reloc" | |
223 | .byte 0 | |
224 | .byte 0 | |
2e064b1e JJ |
225 | .long 0 |
226 | .long 0 | |
227 | .long 0 # SizeOfRawData | |
228 | .long 0 # PointerToRawData | |
291f3632 MF |
229 | .long 0 # PointerToRelocations |
230 | .long 0 # PointerToLineNumbers | |
231 | .word 0 # NumberOfRelocations | |
232 | .word 0 # NumberOfLineNumbers | |
233 | .long 0x42100040 # Characteristics (section flags) | |
743628e8 JJ |
234 | |
235 | # | |
236 | # The offset & size fields are filled in by build.c. | |
237 | # | |
238 | .ascii ".text" | |
239 | .byte 0 | |
240 | .byte 0 | |
241 | .byte 0 | |
242 | .long 0 | |
243 | .long 0x0 # startup_{32,64} | |
244 | .long 0 # Size of initialized data | |
245 | # on disk | |
246 | .long 0x0 # startup_{32,64} | |
247 | .long 0 # PointerToRelocations | |
248 | .long 0 # PointerToLineNumbers | |
249 | .word 0 # NumberOfRelocations | |
250 | .word 0 # NumberOfLineNumbers | |
251 | .long 0x60500020 # Characteristics (section flags) | |
252 | ||
291f3632 | 253 | #endif /* CONFIG_EFI_STUB */ |
62607313 PA |
254 | |
255 | # Kernel attributes; used by setup. This is part 1 of the | |
256 | # header, from the old boot sector. | |
257 | ||
258 | .section ".header", "a" | |
09c205af PA |
259 | .globl sentinel |
260 | sentinel: .byte 0xff, 0xff /* Used to detect broken loaders */ | |
261 | ||
62607313 PA |
262 | .globl hdr |
263 | hdr: | |
5e47c478 | 264 | setup_sects: .byte 0 /* Filled in by build.c */ |
62607313 | 265 | root_flags: .word ROOT_RDONLY |
5e47c478 PA |
266 | syssize: .long 0 /* Filled in by build.c */ |
267 | ram_size: .word 0 /* Obsolete */ | |
62607313 | 268 | vid_mode: .word SVGA_MODE |
5e47c478 | 269 | root_dev: .word 0 /* Filled in by build.c */ |
62607313 PA |
270 | boot_flag: .word 0xAA55 |
271 | ||
272 | # offset 512, entry point | |
273 | ||
274 | .globl _start | |
275 | _start: | |
276 | # Explicitly enter this as bytes, or the assembler | |
277 | # tries to generate a 3-byte jump here, which causes | |
278 | # everything else to push off to the wrong offset. | |
279 | .byte 0xeb # short (2-byte) jump | |
280 | .byte start_of_setup-1f | |
281 | 1: | |
282 | ||
283 | # Part 2 of the header, from the old setup.S | |
284 | ||
285 | .ascii "HdrS" # header signature | |
09c205af | 286 | .word 0x020c # header version number (>= 0x0105) |
62607313 PA |
287 | # or else old loadlin-1.5 will fail) |
288 | .globl realmode_swtch | |
289 | realmode_swtch: .word 0, 0 # default_switch, SETUPSEG | |
5e47c478 PA |
290 | start_sys_seg: .word SYSSEG # obsolete and meaningless, but just |
291 | # in case something decided to "use" it | |
62607313 PA |
292 | .word kernel_version-512 # pointing to kernel version string |
293 | # above section of header is compatible | |
294 | # with loadlin-1.5 (header v1.5). Don't | |
295 | # change it. | |
296 | ||
5e47c478 PA |
297 | type_of_loader: .byte 0 # 0 means ancient bootloader, newer |
298 | # bootloaders know to change this. | |
395cf969 | 299 | # See Documentation/x86/boot.txt for |
62607313 PA |
300 | # assigned ids |
301 | ||
302 | # flags, unused bits must be zero (RFU) bit within loadflags | |
303 | loadflags: | |
09c205af | 304 | .byte LOADED_HIGH # The kernel is to be loaded high |
62607313 PA |
305 | |
306 | setup_move_size: .word 0x8000 # size to move, when setup is not | |
307 | # loaded at 0x90000. We will move setup | |
308 | # to 0x90000 then just before jumping | |
309 | # into the kernel. However, only the | |
310 | # loader knows how much data behind | |
311 | # us also needs to be loaded. | |
312 | ||
313 | code32_start: # here loaders can put a different | |
314 | # start address for 32-bit code. | |
62607313 | 315 | .long 0x100000 # 0x100000 = default for big kernel |
62607313 PA |
316 | |
317 | ramdisk_image: .long 0 # address of loaded ramdisk image | |
318 | # Here the loader puts the 32-bit | |
319 | # address where it loaded the image. | |
320 | # This only will be read by the kernel. | |
321 | ||
322 | ramdisk_size: .long 0 # its size in bytes | |
323 | ||
324 | bootsect_kludge: | |
325 | .long 0 # obsolete | |
326 | ||
6b6815c6 PA |
327 | heap_end_ptr: .word _end+STACK_SIZE-512 |
328 | # (Header version 0x0201 or later) | |
62607313 PA |
329 | # space from here (exclusive) down to |
330 | # end of setup code can be used by setup | |
331 | # for local heap purposes. | |
332 | ||
5031296c PA |
333 | ext_loader_ver: |
334 | .byte 0 # Extended boot loader version | |
335 | ext_loader_type: | |
336 | .byte 0 # Extended boot loader type | |
337 | ||
62607313 PA |
338 | cmd_line_ptr: .long 0 # (Header version 0x0202 or later) |
339 | # If nonzero, a 32-bit pointer | |
340 | # to the kernel command line. | |
341 | # The command line should be | |
342 | # located between the start of | |
343 | # setup and the end of low | |
344 | # memory (0xa0000), or it may | |
345 | # get overwritten before it | |
346 | # gets read. If this field is | |
347 | # used, there is no longer | |
348 | # anything magical about the | |
349 | # 0x90000 segment; the setup | |
350 | # can be located anywhere in | |
351 | # low memory 0x10000 or higher. | |
352 | ||
cf8fa920 | 353 | ramdisk_max: .long 0x7fffffff |
62607313 PA |
354 | # (Header version 0x0203 or later) |
355 | # The highest safe address for | |
356 | # the contents of an initrd | |
cf8fa920 PA |
357 | # The current kernel allows up to 4 GB, |
358 | # but leave it at 2 GB to avoid | |
359 | # possible bootloader bugs. | |
62607313 PA |
360 | |
361 | kernel_alignment: .long CONFIG_PHYSICAL_ALIGN #physical addr alignment | |
362 | #required for protected mode | |
363 | #kernel | |
364 | #ifdef CONFIG_RELOCATABLE | |
365 | relocatable_kernel: .byte 1 | |
366 | #else | |
367 | relocatable_kernel: .byte 0 | |
368 | #endif | |
37ba7ab5 | 369 | min_alignment: .byte MIN_KERNEL_ALIGN_LG2 # minimum alignment |
09c205af PA |
370 | |
371 | xloadflags: | |
372 | #ifdef CONFIG_X86_64 | |
373 | # define XLF0 XLF_KERNEL_64 /* 64-bit kernel */ | |
374 | #else | |
375 | # define XLF0 0 | |
376 | #endif | |
377 | #ifdef CONFIG_EFI_STUB | |
378 | # ifdef CONFIG_X86_64 | |
379 | # define XLF23 XLF_EFI_HANDOVER_64 /* 64-bit EFI handover ok */ | |
380 | # else | |
381 | # define XLF23 XLF_EFI_HANDOVER_32 /* 32-bit EFI handover ok */ | |
382 | # endif | |
383 | #else | |
384 | # define XLF23 0 | |
385 | #endif | |
386 | .word XLF0 | XLF23 | |
62607313 PA |
387 | |
388 | cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line, | |
389 | #added with boot protocol | |
390 | #version 2.06 | |
391 | ||
a24e7851 RR |
392 | hardware_subarch: .long 0 # subarchitecture, added with 2.07 |
393 | # default to 0 for normal x86 PC | |
394 | ||
395 | hardware_subarch_data: .quad 0 | |
396 | ||
77d1a499 PA |
397 | payload_offset: .long ZO_input_data |
398 | payload_length: .long ZO_z_input_len | |
099e1377 | 399 | |
8b664aa6 HY |
400 | setup_data: .quad 0 # 64-bit physical pointer to |
401 | # single linked list of | |
402 | # struct setup_data | |
403 | ||
37ba7ab5 PA |
404 | pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr |
405 | ||
c6ac4c18 | 406 | #define ZO_INIT_SIZE (ZO__end - ZO_startup_32 + ZO_z_extract_offset) |
37ba7ab5 PA |
407 | #define VO_INIT_SIZE (VO__end - VO__text) |
408 | #if ZO_INIT_SIZE > VO_INIT_SIZE | |
409 | #define INIT_SIZE ZO_INIT_SIZE | |
410 | #else | |
411 | #define INIT_SIZE VO_INIT_SIZE | |
412 | #endif | |
413 | init_size: .long INIT_SIZE # kernel initialization size | |
09c205af PA |
414 | handover_offset: |
415 | #ifdef CONFIG_EFI_STUB | |
416 | .long 0x30 # offset to the handover | |
9ca8f72a | 417 | # protocol entry point |
09c205af PA |
418 | #else |
419 | .long 0 | |
420 | #endif | |
37ba7ab5 | 421 | |
62607313 PA |
422 | # End of setup header ##################################################### |
423 | ||
7a734e7d | 424 | .section ".entrytext", "ax" |
62607313 | 425 | start_of_setup: |
62607313 PA |
426 | # Force %es = %ds |
427 | movw %ds, %ax | |
428 | movw %ax, %es | |
429 | cld | |
430 | ||
16252da6 JR |
431 | # Apparently some ancient versions of LILO invoked the kernel with %ss != %ds, |
432 | # which happened to work by accident for the old code. Recalculate the stack | |
433 | # pointer if %ss is invalid. Otherwise leave it alone, LOADLIN sets up the | |
434 | # stack behind its own code, so we can't blindly put it directly past the heap. | |
6b6815c6 | 435 | |
6b6815c6 PA |
436 | movw %ss, %dx |
437 | cmpw %ax, %dx # %ds == %ss? | |
438 | movw %sp, %dx | |
16252da6 JR |
439 | je 2f # -> assume %sp is reasonably set |
440 | ||
441 | # Invalid %ss, make up a new stack | |
442 | movw $_end, %dx | |
443 | testb $CAN_USE_HEAP, loadflags | |
444 | jz 1f | |
445 | movw heap_end_ptr, %dx | |
446 | 1: addw $STACK_SIZE, %dx | |
447 | jnc 2f | |
448 | xorw %dx, %dx # Prevent wraparound | |
6b6815c6 | 449 | |
16252da6 | 450 | 2: # Now %dx should point to the end of our stack space |
6b6815c6 PA |
451 | andw $~3, %dx # dword align (might as well...) |
452 | jnz 3f | |
453 | movw $0xfffc, %dx # Make sure we're not zero | |
16252da6 | 454 | 3: movw %ax, %ss |
6b6815c6 PA |
455 | movzwl %dx, %esp # Clear upper half of %esp |
456 | sti # Now we should have a working stack | |
457 | ||
458 | # We will have entered with %cs = %ds+0x20, normalize %cs so | |
459 | # it is on par with the other segments. | |
460 | pushw %ds | |
461 | pushw $6f | |
462 | lretw | |
463 | 6: | |
62607313 PA |
464 | |
465 | # Check signature at end of setup | |
466 | cmpl $0x5a5aaa55, setup_sig | |
467 | jne setup_bad | |
468 | ||
469 | # Zero the bss | |
470 | movw $__bss_start, %di | |
471 | movw $_end+3, %cx | |
472 | xorl %eax, %eax | |
473 | subw %di, %cx | |
474 | shrw $2, %cx | |
475 | rep; stosl | |
476 | ||
477 | # Jump to C code (should not return) | |
478 | calll main | |
479 | ||
480 | # Setup corrupt somehow... | |
481 | setup_bad: | |
482 | movl $setup_corrupt, %eax | |
483 | calll puts | |
484 | # Fall through... | |
485 | ||
486 | .globl die | |
487 | .type die, @function | |
488 | die: | |
489 | hlt | |
490 | jmp die | |
491 | ||
bbc15f46 | 492 | .size die, .-die |
62607313 PA |
493 | |
494 | .section ".initdata", "a" | |
495 | setup_corrupt: | |
496 | .byte 7 | |
8b608d2f | 497 | .string "No setup signature found...\n" |