x86, intel-iommu: fix X2APIC && !ACPI build failure
[deliverable/linux.git] / arch / x86 / boot / video-vga.c
CommitLineData
5e8ddcbe
PA
1/* -*- linux-c -*- ------------------------------------------------------- *
2 *
3 * Copyright (C) 1991, 1992 Linus Torvalds
4 * Copyright 2007 rPath, Inc. - All Rights Reserved
5 *
6 * This file is part of the Linux kernel, and is made available under
7 * the terms of the GNU General Public License version 2.
8 *
9 * ----------------------------------------------------------------------- */
10
11/*
5e8ddcbe
PA
12 * Common all-VGA modes
13 */
14
15#include "boot.h"
16#include "video.h"
17
18static struct mode_info vga_modes[] = {
1cac5004
PA
19 { VIDEO_80x25, 80, 25, 0 },
20 { VIDEO_8POINT, 80, 50, 0 },
21 { VIDEO_80x43, 80, 43, 0 },
22 { VIDEO_80x28, 80, 28, 0 },
23 { VIDEO_80x30, 80, 30, 0 },
24 { VIDEO_80x34, 80, 34, 0 },
25 { VIDEO_80x60, 80, 60, 0 },
5e8ddcbe
PA
26};
27
28static struct mode_info ega_modes[] = {
1cac5004
PA
29 { VIDEO_80x25, 80, 25, 0 },
30 { VIDEO_8POINT, 80, 43, 0 },
5e8ddcbe
PA
31};
32
33static struct mode_info cga_modes[] = {
1cac5004 34 { VIDEO_80x25, 80, 25, 0 },
5e8ddcbe
PA
35};
36
a1a00b58 37static __videocard video_vga;
5e8ddcbe
PA
38
39/* Set basic 80x25 mode */
40static u8 vga_set_basic_mode(void)
41{
42 u16 ax;
43 u8 rows;
44 u8 mode;
45
46#ifdef CONFIG_VIDEO_400_HACK
47 if (adapter >= ADAPTER_VGA) {
b015124e
PA
48 asm volatile(INT10
49 : : "a" (0x1202), "b" (0x0030)
50 : "ecx", "edx", "esi", "edi");
5e8ddcbe
PA
51 }
52#endif
53
54 ax = 0x0f00;
b015124e
PA
55 asm volatile(INT10
56 : "+a" (ax)
57 : : "ebx", "ecx", "edx", "esi", "edi");
5e8ddcbe
PA
58
59 mode = (u8)ax;
60
61 set_fs(0);
62 rows = rdfs8(0x484); /* rows minus one */
63
64#ifndef CONFIG_VIDEO_400_HACK
65 if ((ax == 0x5003 || ax == 0x5007) &&
66 (rows == 0 || rows == 24))
67 return mode;
68#endif
69
70 if (mode != 3 && mode != 7)
71 mode = 3;
72
73 /* Set the mode */
71351b98 74 ax = mode;
5e8ddcbe 75 asm volatile(INT10
71351b98
PA
76 : "+a" (ax)
77 : : "ebx", "ecx", "edx", "esi", "edi");
5e8ddcbe
PA
78 do_restore = 1;
79 return mode;
80}
81
82static void vga_set_8font(void)
83{
84 /* Set 8x8 font - 80x43 on EGA, 80x50 on VGA */
85
86 /* Set 8x8 font */
87 asm volatile(INT10 : : "a" (0x1112), "b" (0));
88
89 /* Use alternate print screen */
90 asm volatile(INT10 : : "a" (0x1200), "b" (0x20));
91
92 /* Turn off cursor emulation */
93 asm volatile(INT10 : : "a" (0x1201), "b" (0x34));
94
95 /* Cursor is scan lines 6-7 */
96 asm volatile(INT10 : : "a" (0x0100), "c" (0x0607));
97}
98
99static void vga_set_14font(void)
100{
101 /* Set 9x14 font - 80x28 on VGA */
102
103 /* Set 9x14 font */
104 asm volatile(INT10 : : "a" (0x1111), "b" (0));
105
106 /* Turn off cursor emulation */
107 asm volatile(INT10 : : "a" (0x1201), "b" (0x34));
108
109 /* Cursor is scan lines 11-12 */
110 asm volatile(INT10 : : "a" (0x0100), "c" (0x0b0c));
111}
112
113static void vga_set_80x43(void)
114{
115 /* Set 80x43 mode on VGA (not EGA) */
116
117 /* Set 350 scans */
118 asm volatile(INT10 : : "a" (0x1201), "b" (0x30));
119
120 /* Reset video mode */
121 asm volatile(INT10 : : "a" (0x0003));
122
123 vga_set_8font();
124}
125
126/* I/O address of the VGA CRTC */
127u16 vga_crtc(void)
128{
129 return (inb(0x3cc) & 1) ? 0x3d4 : 0x3b4;
130}
131
5f641356 132static void vga_set_480_scanlines(int lines)
5e8ddcbe 133{
5f641356
PA
134 u16 crtc; /* CRTC base address */
135 u8 csel; /* CRTC miscellaneous output register */
136 u8 ovfw; /* CRTC overflow register */
137 int end = lines-1;
5e8ddcbe
PA
138
139 crtc = vga_crtc();
140
5f641356
PA
141 ovfw = 0x3c | ((end >> (8-1)) & 0x02) | ((end >> (9-6)) & 0x40);
142
5e8ddcbe
PA
143 out_idx(0x0c, crtc, 0x11); /* Vertical sync end, unlock CR0-7 */
144 out_idx(0x0b, crtc, 0x06); /* Vertical total */
5f641356 145 out_idx(ovfw, crtc, 0x07); /* Vertical overflow */
5e8ddcbe 146 out_idx(0xea, crtc, 0x10); /* Vertical sync start */
5f641356 147 out_idx(end, crtc, 0x12); /* Vertical display end */
5e8ddcbe
PA
148 out_idx(0xe7, crtc, 0x15); /* Vertical blank start */
149 out_idx(0x04, crtc, 0x16); /* Vertical blank end */
150 csel = inb(0x3cc);
151 csel &= 0x0d;
152 csel |= 0xe2;
5f641356 153 outb(csel, 0x3c2);
5e8ddcbe
PA
154}
155
156static void vga_set_80x30(void)
157{
5f641356 158 vga_set_480_scanlines(30*16);
5e8ddcbe
PA
159}
160
161static void vga_set_80x34(void)
162{
163 vga_set_14font();
5f641356 164 vga_set_480_scanlines(34*14);
5e8ddcbe
PA
165}
166
167static void vga_set_80x60(void)
168{
169 vga_set_8font();
5f641356 170 vga_set_480_scanlines(60*8);
5e8ddcbe
PA
171}
172
173static int vga_set_mode(struct mode_info *mode)
174{
175 /* Set the basic mode */
176 vga_set_basic_mode();
177
178 /* Override a possibly broken BIOS */
179 force_x = mode->x;
180 force_y = mode->y;
181
182 switch (mode->mode) {
183 case VIDEO_80x25:
184 break;
185 case VIDEO_8POINT:
186 vga_set_8font();
187 break;
188 case VIDEO_80x43:
189 vga_set_80x43();
190 break;
191 case VIDEO_80x28:
192 vga_set_14font();
193 break;
194 case VIDEO_80x30:
195 vga_set_80x30();
196 break;
197 case VIDEO_80x34:
198 vga_set_80x34();
199 break;
200 case VIDEO_80x60:
201 vga_set_80x60();
202 break;
203 }
204
205 return 0;
206}
207
208/*
209 * Note: this probe includes basic information required by all
210 * systems. It should be executed first, by making sure
211 * video-vga.c is listed first in the Makefile.
212 */
213static int vga_probe(void)
214{
e44b7b75
PM
215 u16 ega_bx;
216
5e8ddcbe
PA
217 static const char *card_name[] = {
218 "CGA/MDA/HGC", "EGA", "VGA"
219 };
220 static struct mode_info *mode_lists[] = {
221 cga_modes,
222 ega_modes,
223 vga_modes,
224 };
225 static int mode_count[] = {
226 sizeof(cga_modes)/sizeof(struct mode_info),
227 sizeof(ega_modes)/sizeof(struct mode_info),
228 sizeof(vga_modes)/sizeof(struct mode_info),
229 };
230 u8 vga_flag;
231
232 asm(INT10
e44b7b75 233 : "=b" (ega_bx)
5e8ddcbe
PA
234 : "a" (0x1200), "b" (0x10) /* Check EGA/VGA */
235 : "ecx", "edx", "esi", "edi");
236
e44b7b75
PM
237#ifndef _WAKEUP
238 boot_params.screen_info.orig_video_ega_bx = ega_bx;
239#endif
240
5e8ddcbe 241 /* If we have MDA/CGA/HGC then BL will be unchanged at 0x10 */
e44b7b75 242 if ((u8)ega_bx != 0x10) {
5e8ddcbe
PA
243 /* EGA/VGA */
244 asm(INT10
245 : "=a" (vga_flag)
246 : "a" (0x1a00)
247 : "ebx", "ecx", "edx", "esi", "edi");
248
249 if (vga_flag == 0x1a) {
250 adapter = ADAPTER_VGA;
e44b7b75 251#ifndef _WAKEUP
5e8ddcbe 252 boot_params.screen_info.orig_video_isVGA = 1;
e44b7b75 253#endif
5e8ddcbe
PA
254 } else {
255 adapter = ADAPTER_EGA;
256 }
257 } else {
258 adapter = ADAPTER_CGA;
259 }
260
261 video_vga.modes = mode_lists[adapter];
262 video_vga.card_name = card_name[adapter];
263 return mode_count[adapter];
264}
265
a1a00b58 266static __videocard video_vga = {
5e8ddcbe
PA
267 .card_name = "VGA",
268 .probe = vga_probe,
269 .set_mode = vga_set_mode,
270};
This page took 0.221503 seconds and 5 git commands to generate.