Commit | Line | Data |
---|---|---|
3ef0e1f8 AS |
1 | /* |
2 | * Low-level PCI config space access for OLPC systems who lack the VSA | |
3 | * PCI virtualization software. | |
4 | * | |
5 | * Copyright © 2006 Advanced Micro Devices, Inc. | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; either version 2 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * The AMD Geode chipset (ie: GX2 processor, cs5536 I/O companion device) | |
13 | * has some I/O functions (display, southbridge, sound, USB HCIs, etc) | |
14 | * that more or less behave like PCI devices, but the hardware doesn't | |
15 | * directly implement the PCI configuration space headers. AMD provides | |
16 | * "VSA" (Virtual System Architecture) software that emulates PCI config | |
17 | * space for these devices, by trapping I/O accesses to PCI config register | |
18 | * (CF8/CFC) and running some code in System Management Mode interrupt state. | |
19 | * On the OLPC platform, we don't want to use that VSA code because | |
20 | * (a) it slows down suspend/resume, and (b) recompiling it requires special | |
21 | * compilers that are hard to get. So instead of letting the complex VSA | |
22 | * code simulate the PCI config registers for the on-chip devices, we | |
23 | * just simulate them the easy way, by inserting the code into the | |
24 | * pci_write_config and pci_read_config path. Most of the config registers | |
25 | * are read-only anyway, so the bulk of the simulation is just table lookup. | |
26 | */ | |
27 | ||
28 | #include <linux/pci.h> | |
29 | #include <linux/init.h> | |
30 | #include <asm/olpc.h> | |
31 | #include <asm/geode.h> | |
82487711 | 32 | #include <asm/pci_x86.h> |
3ef0e1f8 AS |
33 | |
34 | /* | |
35 | * In the tables below, the first two line (8 longwords) are the | |
36 | * size masks that are used when the higher level PCI code determines | |
37 | * the size of the region by writing ~0 to a base address register | |
38 | * and reading back the result. | |
39 | * | |
40 | * The following lines are the values that are read during normal | |
41 | * PCI config access cycles, i.e. not after just having written | |
42 | * ~0 to a base address register. | |
43 | */ | |
44 | ||
45 | static const uint32_t lxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */ | |
46 | 0x0, 0x0, 0x0, 0x0, | |
47 | 0x0, 0x0, 0x0, 0x0, | |
48 | ||
49 | 0x281022, 0x2200005, 0x6000021, 0x80f808, /* AMD Vendor ID */ | |
50 | 0x0, 0x0, 0x0, 0x0, /* No virtual registers, hence no BAR */ | |
51 | 0x0, 0x0, 0x0, 0x28100b, | |
52 | 0x0, 0x0, 0x0, 0x0, | |
53 | 0x0, 0x0, 0x0, 0x0, | |
54 | 0x0, 0x0, 0x0, 0x0, | |
55 | 0x0, 0x0, 0x0, 0x0, | |
56 | }; | |
57 | ||
58 | static const uint32_t gxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */ | |
59 | 0xfffffffd, 0x0, 0x0, 0x0, | |
60 | 0x0, 0x0, 0x0, 0x0, | |
61 | ||
62 | 0x28100b, 0x2200005, 0x6000021, 0x80f808, /* NSC Vendor ID */ | |
63 | 0xac1d, 0x0, 0x0, 0x0, /* I/O BAR - base of virtual registers */ | |
64 | 0x0, 0x0, 0x0, 0x28100b, | |
65 | 0x0, 0x0, 0x0, 0x0, | |
66 | 0x0, 0x0, 0x0, 0x0, | |
67 | 0x0, 0x0, 0x0, 0x0, | |
68 | 0x0, 0x0, 0x0, 0x0, | |
69 | }; | |
70 | ||
71 | static const uint32_t lxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */ | |
72 | 0xff000008, 0xffffc000, 0xffffc000, 0xffffc000, | |
73 | 0xffffc000, 0x0, 0x0, 0x0, | |
74 | ||
75 | 0x20811022, 0x2200003, 0x3000000, 0x0, /* AMD Vendor ID */ | |
76 | 0xfd000000, 0xfe000000, 0xfe004000, 0xfe008000, /* FB, GP, VG, DF */ | |
77 | 0xfe00c000, 0x0, 0x0, 0x30100b, /* VIP */ | |
78 | 0x0, 0x0, 0x0, 0x10e, /* INTA, IRQ14 for graphics accel */ | |
79 | 0x0, 0x0, 0x0, 0x0, | |
80 | 0x3d0, 0x3c0, 0xa0000, 0x0, /* VG IO, VG IO, EGA FB, MONO FB */ | |
81 | 0x0, 0x0, 0x0, 0x0, | |
82 | }; | |
83 | ||
84 | static const uint32_t gxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */ | |
85 | 0xff800008, 0xffffc000, 0xffffc000, 0xffffc000, | |
86 | 0x0, 0x0, 0x0, 0x0, | |
87 | ||
88 | 0x30100b, 0x2200003, 0x3000000, 0x0, /* NSC Vendor ID */ | |
89 | 0xfd000000, 0xfe000000, 0xfe004000, 0xfe008000, /* FB, GP, VG, DF */ | |
90 | 0x0, 0x0, 0x0, 0x30100b, | |
91 | 0x0, 0x0, 0x0, 0x0, | |
92 | 0x0, 0x0, 0x0, 0x0, | |
93 | 0x3d0, 0x3c0, 0xa0000, 0x0, /* VG IO, VG IO, EGA FB, MONO FB */ | |
94 | 0x0, 0x0, 0x0, 0x0, | |
95 | }; | |
96 | ||
97 | static const uint32_t aes_hdr[] = { /* dev 1 function 2 - devfn = 0xa */ | |
98 | 0xffffc000, 0x0, 0x0, 0x0, | |
99 | 0x0, 0x0, 0x0, 0x0, | |
100 | ||
101 | 0x20821022, 0x2a00006, 0x10100000, 0x8, /* NSC Vendor ID */ | |
102 | 0xfe010000, 0x0, 0x0, 0x0, /* AES registers */ | |
103 | 0x0, 0x0, 0x0, 0x20821022, | |
104 | 0x0, 0x0, 0x0, 0x0, | |
105 | 0x0, 0x0, 0x0, 0x0, | |
106 | 0x0, 0x0, 0x0, 0x0, | |
107 | 0x0, 0x0, 0x0, 0x0, | |
108 | }; | |
109 | ||
110 | ||
111 | static const uint32_t isa_hdr[] = { /* dev f function 0 - devfn = 78 */ | |
112 | 0xfffffff9, 0xffffff01, 0xffffffc1, 0xffffffe1, | |
113 | 0xffffff81, 0xffffffc1, 0x0, 0x0, | |
114 | ||
115 | 0x20901022, 0x2a00049, 0x6010003, 0x802000, | |
116 | 0x18b1, 0x1001, 0x1801, 0x1881, /* SMB-8 GPIO-256 MFGPT-64 IRQ-32 */ | |
117 | 0x1401, 0x1841, 0x0, 0x20901022, /* PMS-128 ACPI-64 */ | |
118 | 0x0, 0x0, 0x0, 0x0, | |
119 | 0x0, 0x0, 0x0, 0x0, | |
120 | 0x0, 0x0, 0x0, 0xaa5b, /* IRQ steering */ | |
121 | 0x0, 0x0, 0x0, 0x0, | |
122 | }; | |
123 | ||
124 | static const uint32_t ac97_hdr[] = { /* dev f function 3 - devfn = 7b */ | |
125 | 0xffffff81, 0x0, 0x0, 0x0, | |
126 | 0x0, 0x0, 0x0, 0x0, | |
127 | ||
128 | 0x20931022, 0x2a00041, 0x4010001, 0x0, | |
129 | 0x1481, 0x0, 0x0, 0x0, /* I/O BAR-128 */ | |
130 | 0x0, 0x0, 0x0, 0x20931022, | |
131 | 0x0, 0x0, 0x0, 0x205, /* IntB, IRQ5 */ | |
132 | 0x0, 0x0, 0x0, 0x0, | |
133 | 0x0, 0x0, 0x0, 0x0, | |
134 | 0x0, 0x0, 0x0, 0x0, | |
135 | }; | |
136 | ||
137 | static const uint32_t ohci_hdr[] = { /* dev f function 4 - devfn = 7c */ | |
138 | 0xfffff000, 0x0, 0x0, 0x0, | |
139 | 0x0, 0x0, 0x0, 0x0, | |
140 | ||
141 | 0x20941022, 0x2300006, 0xc031002, 0x0, | |
142 | 0xfe01a000, 0x0, 0x0, 0x0, /* MEMBAR-1000 */ | |
143 | 0x0, 0x0, 0x0, 0x20941022, | |
144 | 0x0, 0x40, 0x0, 0x40a, /* CapPtr INT-D, IRQA */ | |
145 | 0xc8020001, 0x0, 0x0, 0x0, /* Capabilities - 40 is R/O, | |
146 | 44 is mask 8103 (power control) */ | |
147 | 0x0, 0x0, 0x0, 0x0, | |
148 | 0x0, 0x0, 0x0, 0x0, | |
149 | }; | |
150 | ||
151 | static const uint32_t ehci_hdr[] = { /* dev f function 4 - devfn = 7d */ | |
152 | 0xfffff000, 0x0, 0x0, 0x0, | |
153 | 0x0, 0x0, 0x0, 0x0, | |
154 | ||
155 | 0x20951022, 0x2300006, 0xc032002, 0x0, | |
156 | 0xfe01b000, 0x0, 0x0, 0x0, /* MEMBAR-1000 */ | |
157 | 0x0, 0x0, 0x0, 0x20951022, | |
158 | 0x0, 0x40, 0x0, 0x40a, /* CapPtr INT-D, IRQA */ | |
159 | 0xc8020001, 0x0, 0x0, 0x0, /* Capabilities - 40 is R/O, 44 is | |
160 | mask 8103 (power control) */ | |
161 | #if 0 | |
162 | 0x1, 0x40080000, 0x0, 0x0, /* EECP - see EHCI spec section 2.1.7 */ | |
163 | #endif | |
164 | 0x01000001, 0x0, 0x0, 0x0, /* EECP - see EHCI spec section 2.1.7 */ | |
165 | 0x2020, 0x0, 0x0, 0x0, /* (EHCI page 8) 60 SBRN (R/O), | |
166 | 61 FLADJ (R/W), PORTWAKECAP */ | |
167 | }; | |
168 | ||
169 | static uint32_t ff_loc = ~0; | |
170 | static uint32_t zero_loc; | |
171 | static int bar_probing; /* Set after a write of ~0 to a BAR */ | |
172 | static int is_lx; | |
173 | ||
174 | #define NB_SLOT 0x1 /* Northbridge - GX chip - Device 1 */ | |
175 | #define SB_SLOT 0xf /* Southbridge - CS5536 chip - Device F */ | |
176 | ||
177 | static int is_simulated(unsigned int bus, unsigned int devfn) | |
178 | { | |
179 | return (!bus && ((PCI_SLOT(devfn) == NB_SLOT) || | |
180 | (PCI_SLOT(devfn) == SB_SLOT))); | |
181 | } | |
182 | ||
183 | static uint32_t *hdr_addr(const uint32_t *hdr, int reg) | |
184 | { | |
185 | uint32_t addr; | |
186 | ||
187 | /* | |
188 | * This is a little bit tricky. The header maps consist of | |
189 | * 0x20 bytes of size masks, followed by 0x70 bytes of header data. | |
190 | * In the normal case, when not probing a BAR's size, we want | |
191 | * to access the header data, so we add 0x20 to the reg offset, | |
192 | * thus skipping the size mask area. | |
193 | * In the BAR probing case, we want to access the size mask for | |
194 | * the BAR, so we subtract 0x10 (the config header offset for | |
195 | * BAR0), and don't skip the size mask area. | |
196 | */ | |
197 | ||
198 | addr = (uint32_t)hdr + reg + (bar_probing ? -0x10 : 0x20); | |
199 | ||
200 | bar_probing = 0; | |
201 | return (uint32_t *)addr; | |
202 | } | |
203 | ||
204 | static int pci_olpc_read(unsigned int seg, unsigned int bus, | |
205 | unsigned int devfn, int reg, int len, uint32_t *value) | |
206 | { | |
207 | uint32_t *addr; | |
208 | ||
db34a363 JB |
209 | WARN_ON(seg); |
210 | ||
3ef0e1f8 AS |
211 | /* Use the hardware mechanism for non-simulated devices */ |
212 | if (!is_simulated(bus, devfn)) | |
213 | return pci_direct_conf1.read(seg, bus, devfn, reg, len, value); | |
214 | ||
215 | /* | |
216 | * No device has config registers past 0x70, so we save table space | |
217 | * by not storing entries for the nonexistent registers | |
218 | */ | |
219 | if (reg >= 0x70) | |
220 | addr = &zero_loc; | |
221 | else { | |
222 | switch (devfn) { | |
223 | case 0x8: | |
224 | addr = hdr_addr(is_lx ? lxnb_hdr : gxnb_hdr, reg); | |
225 | break; | |
226 | case 0x9: | |
227 | addr = hdr_addr(is_lx ? lxfb_hdr : gxfb_hdr, reg); | |
228 | break; | |
229 | case 0xa: | |
230 | addr = is_lx ? hdr_addr(aes_hdr, reg) : &ff_loc; | |
231 | break; | |
232 | case 0x78: | |
233 | addr = hdr_addr(isa_hdr, reg); | |
234 | break; | |
235 | case 0x7b: | |
236 | addr = hdr_addr(ac97_hdr, reg); | |
237 | break; | |
238 | case 0x7c: | |
239 | addr = hdr_addr(ohci_hdr, reg); | |
240 | break; | |
241 | case 0x7d: | |
242 | addr = hdr_addr(ehci_hdr, reg); | |
243 | break; | |
244 | default: | |
245 | addr = &ff_loc; | |
246 | break; | |
247 | } | |
248 | } | |
249 | switch (len) { | |
250 | case 1: | |
251 | *value = *(uint8_t *)addr; | |
252 | break; | |
253 | case 2: | |
254 | *value = *(uint16_t *)addr; | |
255 | break; | |
256 | case 4: | |
257 | *value = *addr; | |
258 | break; | |
259 | default: | |
260 | BUG(); | |
261 | } | |
262 | ||
263 | return 0; | |
264 | } | |
265 | ||
266 | static int pci_olpc_write(unsigned int seg, unsigned int bus, | |
267 | unsigned int devfn, int reg, int len, uint32_t value) | |
268 | { | |
db34a363 JB |
269 | WARN_ON(seg); |
270 | ||
3ef0e1f8 AS |
271 | /* Use the hardware mechanism for non-simulated devices */ |
272 | if (!is_simulated(bus, devfn)) | |
273 | return pci_direct_conf1.write(seg, bus, devfn, reg, len, value); | |
274 | ||
275 | /* XXX we may want to extend this to simulate EHCI power management */ | |
276 | ||
277 | /* | |
278 | * Mostly we just discard writes, but if the write is a size probe | |
279 | * (i.e. writing ~0 to a BAR), we remember it and arrange to return | |
280 | * the appropriate size mask on the next read. This is cheating | |
281 | * to some extent, because it depends on the fact that the next | |
282 | * access after such a write will always be a read to the same BAR. | |
283 | */ | |
284 | ||
285 | if ((reg >= 0x10) && (reg < 0x2c)) { | |
286 | /* write is to a BAR */ | |
287 | if (value == ~0) | |
288 | bar_probing = 1; | |
289 | } else { | |
290 | /* | |
291 | * No warning on writes to ROM BAR, CMD, LATENCY_TIMER, | |
292 | * CACHE_LINE_SIZE, or PM registers. | |
293 | */ | |
294 | if ((reg != PCI_ROM_ADDRESS) && (reg != PCI_COMMAND_MASTER) && | |
295 | (reg != PCI_LATENCY_TIMER) && | |
296 | (reg != PCI_CACHE_LINE_SIZE) && (reg != 0x44)) | |
297 | printk(KERN_WARNING "OLPC PCI: Config write to devfn" | |
298 | " %x reg %x value %x\n", devfn, reg, value); | |
299 | } | |
300 | ||
301 | return 0; | |
302 | } | |
303 | ||
72da0b07 | 304 | static const struct pci_raw_ops pci_olpc_conf = { |
3ef0e1f8 AS |
305 | .read = pci_olpc_read, |
306 | .write = pci_olpc_write, | |
307 | }; | |
308 | ||
2bdd1b03 | 309 | int __init pci_olpc_init(void) |
3ef0e1f8 | 310 | { |
76fb6570 | 311 | printk(KERN_INFO "PCI: Using configuration type OLPC XO-1\n"); |
3ef0e1f8 AS |
312 | raw_pci_ops = &pci_olpc_conf; |
313 | is_lx = is_geode_lx(); | |
2bdd1b03 | 314 | return 0; |
3ef0e1f8 | 315 | } |