Commit | Line | Data |
---|---|---|
421b20b9 JG |
1 | # |
2 | # SATA/PATA driver configuration | |
3 | # | |
4 | ||
b196fc69 JE |
5 | menuconfig ATA |
6 | tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers" | |
e25df120 | 7 | depends on HAS_IOMEM |
bf2d401b | 8 | depends on BLOCK |
9317fd4c | 9 | depends on !(M32R || M68K) || BROKEN |
8abf1064 | 10 | depends on !SUN4 || BROKEN |
81ce3c4b | 11 | select SCSI |
c6fd2807 JG |
12 | ---help--- |
13 | If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or | |
14 | any other ATA device under Linux, say Y and make sure that you know | |
15 | the name of your ATA host adapter (the card inside your computer | |
16 | that "speaks" the ATA protocol, also called ATA controller), | |
17 | because you will be asked for it. | |
18 | ||
abcdceb9 RD |
19 | NOTE: ATA enables basic SCSI support; *however*, |
20 | 'SCSI disk support', 'SCSI tape support', or | |
21 | 'SCSI CDROM support' may also be needed, | |
22 | depending on your hardware configuration. | |
23 | ||
81ce3c4b JG |
24 | if ATA |
25 | ||
8cdf92a9 DW |
26 | config ATA_NONSTANDARD |
27 | bool | |
28 | default n | |
29 | ||
e92351bb | 30 | config ATA_ACPI |
c30484d7 | 31 | bool "ATA ACPI Support" |
e92351bb | 32 | depends on ACPI && PCI |
0ac4a3c2 | 33 | select ACPI_DOCK |
e92351bb TH |
34 | default y |
35 | help | |
36 | This option adds support for ATA-related ACPI objects. | |
37 | These ACPI objects add the ability to retrieve taskfiles | |
38 | from the ACPI BIOS and write them to the disk controller. | |
39 | These objects may be related to performance, security, | |
40 | power management, or other areas. | |
41 | You can disable this at kernel boot time by using the | |
42 | option libata.noacpi=1 | |
43 | ||
88fcd562 TH |
44 | config SATA_PMP |
45 | bool "SATA Port Multiplier support" | |
46 | default y | |
47 | help | |
f3360ebf JG |
48 | This option adds support for SATA Port Multipliers |
49 | (the SATA version of an ethernet hub, or SAS expander). | |
88fcd562 | 50 | |
8ad92ba7 | 51 | config SATA_AHCI |
c6fd2807 | 52 | tristate "AHCI SATA support" |
81ce3c4b | 53 | depends on PCI |
c6fd2807 JG |
54 | help |
55 | This option enables support for AHCI Serial ATA. | |
56 | ||
57 | If unsure, say N. | |
58 | ||
127102ae TH |
59 | config SATA_SIL24 |
60 | tristate "Silicon Image 3124/3132 SATA support" | |
61 | depends on PCI | |
62 | help | |
63 | This option enables support for Silicon Image 3124/3132 Serial ATA. | |
64 | ||
65 | If unsure, say N. | |
66 | ||
67 | config SATA_FSL | |
68 | tristate "Freescale 3.0Gbps SATA support" | |
69 | depends on FSL_SOC | |
70 | help | |
71 | This option enables support for Freescale 3.0Gbps SATA controller. | |
72 | It can be found on MPC837x and MPC8315. | |
73 | ||
74 | If unsure, say N. | |
75 | ||
76 | config ATA_SFF | |
77 | bool "ATA SFF support" | |
78 | default y | |
79 | help | |
80 | This option adds support for ATA controllers with SFF | |
81 | compliant or similar programming interface. | |
82 | ||
f3360ebf JG |
83 | SFF is the legacy IDE interface that has been around since |
84 | the dawn of time. Almost all PATA controllers have an | |
85 | SFF interface. Many SATA controllers have an SFF interface | |
86 | when configured into a legacy compatibility mode. | |
87 | ||
88 | For users with exclusively modern controllers like AHCI, | |
89 | Silicon Image 3124, or Marvell 6440, you may choose to | |
90 | disable this uneeded SFF support. | |
91 | ||
92 | If unsure, say Y. | |
93 | ||
127102ae TH |
94 | if ATA_SFF |
95 | ||
8ad92ba7 | 96 | config SATA_SVW |
c6fd2807 | 97 | tristate "ServerWorks Frodo / Apple K2 SATA support" |
81ce3c4b | 98 | depends on PCI |
c6fd2807 JG |
99 | help |
100 | This option enables support for Broadcom/Serverworks/Apple K2 | |
101 | SATA support. | |
102 | ||
103 | If unsure, say N. | |
104 | ||
8ad92ba7 | 105 | config ATA_PIIX |
2c7620d5 | 106 | tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" |
81ce3c4b | 107 | depends on PCI |
c6fd2807 | 108 | help |
2bfc3611 | 109 | This option enables support for ICH5/6/7/8 Serial ATA |
2c7620d5 A |
110 | and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series |
111 | host controllers. | |
c6fd2807 JG |
112 | |
113 | If unsure, say N. | |
114 | ||
8ad92ba7 | 115 | config SATA_MV |
c6fd2807 | 116 | tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" |
7bb3c529 | 117 | depends on EXPERIMENTAL |
c6fd2807 JG |
118 | help |
119 | This option enables support for the Marvell Serial ATA family. | |
120 | Currently supports 88SX[56]0[48][01] chips. | |
121 | ||
122 | If unsure, say N. | |
123 | ||
8ad92ba7 | 124 | config SATA_NV |
c6fd2807 | 125 | tristate "NVIDIA SATA support" |
81ce3c4b | 126 | depends on PCI |
c6fd2807 JG |
127 | help |
128 | This option enables support for NVIDIA Serial ATA. | |
129 | ||
130 | If unsure, say N. | |
131 | ||
8ad92ba7 | 132 | config PDC_ADMA |
c6fd2807 | 133 | tristate "Pacific Digital ADMA support" |
81ce3c4b | 134 | depends on PCI |
c6fd2807 JG |
135 | help |
136 | This option enables support for Pacific Digital ADMA controllers | |
137 | ||
138 | If unsure, say N. | |
139 | ||
8ad92ba7 | 140 | config SATA_QSTOR |
c6fd2807 | 141 | tristate "Pacific Digital SATA QStor support" |
81ce3c4b | 142 | depends on PCI |
c6fd2807 JG |
143 | help |
144 | This option enables support for Pacific Digital Serial ATA QStor. | |
145 | ||
146 | If unsure, say N. | |
147 | ||
8ad92ba7 | 148 | config SATA_PROMISE |
c6fd2807 | 149 | tristate "Promise SATA TX2/TX4 support" |
81ce3c4b | 150 | depends on PCI |
c6fd2807 JG |
151 | help |
152 | This option enables support for Promise Serial ATA TX2/TX4. | |
153 | ||
154 | If unsure, say N. | |
155 | ||
8ad92ba7 | 156 | config SATA_SX4 |
c6fd2807 | 157 | tristate "Promise SATA SX4 support" |
81ce3c4b | 158 | depends on PCI && EXPERIMENTAL |
c6fd2807 JG |
159 | help |
160 | This option enables support for Promise Serial ATA SX4. | |
161 | ||
162 | If unsure, say N. | |
163 | ||
8ad92ba7 | 164 | config SATA_SIL |
c6fd2807 | 165 | tristate "Silicon Image SATA support" |
81ce3c4b | 166 | depends on PCI |
c6fd2807 JG |
167 | help |
168 | This option enables support for Silicon Image Serial ATA. | |
169 | ||
170 | If unsure, say N. | |
171 | ||
8ad92ba7 | 172 | config SATA_SIS |
9b14dec5 | 173 | tristate "SiS 964/965/966/180 SATA support" |
81ce3c4b | 174 | depends on PCI |
9b14dec5 | 175 | select PATA_SIS |
c6fd2807 | 176 | help |
a617c09f | 177 | This option enables support for SiS Serial ATA on |
9b14dec5 A |
178 | SiS 964/965/966/180 and Parallel ATA on SiS 180. |
179 | The PATA support for SiS 180 requires additionally to | |
180 | enable the PATA_SIS driver in the config. | |
c6fd2807 JG |
181 | If unsure, say N. |
182 | ||
8ad92ba7 | 183 | config SATA_ULI |
c6fd2807 | 184 | tristate "ULi Electronics SATA support" |
81ce3c4b | 185 | depends on PCI |
c6fd2807 JG |
186 | help |
187 | This option enables support for ULi Electronics SATA. | |
188 | ||
189 | If unsure, say N. | |
190 | ||
8ad92ba7 | 191 | config SATA_VIA |
c6fd2807 | 192 | tristate "VIA SATA support" |
81ce3c4b | 193 | depends on PCI |
c6fd2807 JG |
194 | help |
195 | This option enables support for VIA Serial ATA. | |
196 | ||
197 | If unsure, say N. | |
198 | ||
8ad92ba7 | 199 | config SATA_VITESSE |
c6fd2807 | 200 | tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" |
81ce3c4b | 201 | depends on PCI |
c6fd2807 JG |
202 | help |
203 | This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. | |
204 | ||
205 | If unsure, say N. | |
206 | ||
1fd7a697 | 207 | config SATA_INIC162X |
22bfc6d5 TH |
208 | tristate "Initio 162x SATA support" |
209 | depends on PCI | |
1fd7a697 TH |
210 | help |
211 | This option enables support for Initio 162x Serial ATA. | |
212 | ||
025621f9 AC |
213 | config PATA_ACPI |
214 | tristate "ACPI firmware driver for PATA" | |
215 | depends on ATA_ACPI | |
216 | help | |
217 | This option enables an ACPI method driver which drives | |
218 | motherboard PATA controller interfaces through the ACPI | |
219 | firmware in the BIOS. This driver can sometimes handle | |
220 | otherwise unsupported hardware. | |
221 | ||
669a5db4 JG |
222 | config PATA_ALI |
223 | tristate "ALi PATA support (Experimental)" | |
224 | depends on PCI && EXPERIMENTAL | |
225 | help | |
226 | This option enables support for the ALi ATA interfaces | |
227 | found on the many ALi chipsets. | |
228 | ||
229 | If unsure, say N. | |
230 | ||
231 | config PATA_AMD | |
942d0947 | 232 | tristate "AMD/NVidia PATA support" |
669a5db4 JG |
233 | depends on PCI |
234 | help | |
235 | This option enables support for the AMD and NVidia PATA | |
236 | interfaces found on the chipsets for Athlon/Athlon64. | |
237 | ||
238 | If unsure, say N. | |
239 | ||
240 | config PATA_ARTOP | |
c645fd34 AC |
241 | tristate "ARTOP 6210/6260 PATA support" |
242 | depends on PCI | |
669a5db4 JG |
243 | help |
244 | This option enables support for ARTOP PATA controllers. | |
245 | ||
246 | If unsure, say N. | |
247 | ||
7c9ef8e4 KNG |
248 | config PATA_AT32 |
249 | tristate "Atmel AVR32 PATA support (Experimental)" | |
250 | depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL | |
251 | help | |
252 | This option enables support for the IDE devices on the | |
253 | Atmel AT32AP platform. | |
254 | ||
255 | If unsure, say N. | |
256 | ||
669a5db4 | 257 | config PATA_ATIIXP |
c645fd34 AC |
258 | tristate "ATI PATA support" |
259 | depends on PCI | |
669a5db4 JG |
260 | help |
261 | This option enables support for the ATI ATA interfaces | |
262 | found on the many ATI chipsets. | |
263 | ||
264 | If unsure, say N. | |
265 | ||
b2248dac AC |
266 | config PATA_CMD640_PCI |
267 | tristate "CMD640 PCI PATA support (Very Experimental)" | |
268 | depends on PCI && EXPERIMENTAL | |
269 | help | |
270 | This option enables support for the CMD640 PCI IDE | |
271 | interface chip. Only the primary channel is currently | |
272 | supported. | |
273 | ||
274 | If unsure, say N. | |
275 | ||
669a5db4 | 276 | config PATA_CMD64X |
c645fd34 AC |
277 | tristate "CMD64x PATA support" |
278 | depends on PCI | |
669a5db4 JG |
279 | help |
280 | This option enables support for the CMD64x series chips | |
281 | except for the CMD640. | |
282 | ||
283 | If unsure, say N. | |
284 | ||
285 | config PATA_CS5520 | |
286 | tristate "CS5510/5520 PATA support" | |
287 | depends on PCI | |
288 | help | |
289 | This option enables support for the Cyrix 5510/5520 | |
290 | companion chip used with the MediaGX/Geode processor family. | |
291 | ||
292 | If unsure, say N. | |
293 | ||
294 | config PATA_CS5530 | |
295 | tristate "CS5530 PATA support (Experimental)" | |
296 | depends on PCI && EXPERIMENTAL | |
297 | help | |
298 | This option enables support for the Cyrix/NatSemi/AMD CS5530 | |
299 | companion chip used with the MediaGX/Geode processor family. | |
300 | ||
301 | If unsure, say N. | |
302 | ||
303 | config PATA_CS5535 | |
304 | tristate "CS5535 PATA support (Experimental)" | |
305 | depends on PCI && X86 && !X86_64 && EXPERIMENTAL | |
306 | help | |
307 | This option enables support for the NatSemi/AMD CS5535 | |
308 | companion chip used with the Geode processor family. | |
309 | ||
310 | If unsure, say N. | |
311 | ||
3957df61 MP |
312 | config PATA_CS5536 |
313 | tristate "CS5536 PATA support (Experimental)" | |
314 | depends on PCI && X86 && !X86_64 && EXPERIMENTAL | |
315 | help | |
316 | This option enables support for the AMD CS5536 | |
317 | companion chip used with the Geode LX processor family. | |
318 | ||
319 | If unsure, say N. | |
320 | ||
669a5db4 JG |
321 | config PATA_CYPRESS |
322 | tristate "Cypress CY82C693 PATA support (Very Experimental)" | |
323 | depends on PCI && EXPERIMENTAL | |
324 | help | |
325 | This option enables support for the Cypress/Contaq CY82C693 | |
326 | chipset found in some Alpha systems | |
327 | ||
328 | If unsure, say N. | |
329 | ||
330 | config PATA_EFAR | |
331 | tristate "EFAR SLC90E66 support" | |
332 | depends on PCI | |
333 | help | |
334 | This option enables support for the EFAR SLC90E66 | |
335 | IDE controller found on some older machines. | |
336 | ||
337 | If unsure, say N. | |
338 | ||
339 | config ATA_GENERIC | |
340 | tristate "Generic ATA support" | |
341 | depends on PCI | |
342 | help | |
343 | This option enables support for generic BIOS configured | |
344 | ATA controllers via the new ATA layer | |
345 | ||
346 | If unsure, say N. | |
347 | ||
348 | config PATA_HPT366 | |
c645fd34 AC |
349 | tristate "HPT 366/368 PATA support" |
350 | depends on PCI | |
669a5db4 JG |
351 | help |
352 | This option enables support for the HPT 366 and 368 | |
353 | PATA controllers via the new ATA layer. | |
354 | ||
355 | If unsure, say N. | |
356 | ||
357 | config PATA_HPT37X | |
942d0947 | 358 | tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)" |
669a5db4 JG |
359 | depends on PCI && EXPERIMENTAL |
360 | help | |
361 | This option enables support for the majority of the later HPT | |
362 | PATA controllers via the new ATA layer. | |
363 | ||
364 | If unsure, say N. | |
365 | ||
366 | config PATA_HPT3X2N | |
367 | tristate "HPT 372N/302N PATA support (Very Experimental)" | |
368 | depends on PCI && EXPERIMENTAL | |
369 | help | |
370 | This option enables support for the N variant HPT PATA | |
371 | controllers via the new ATA layer | |
372 | ||
373 | If unsure, say N. | |
374 | ||
375 | config PATA_HPT3X3 | |
66e7da4e | 376 | tristate "HPT 343/363 PATA support" |
669a5db4 JG |
377 | depends on PCI |
378 | help | |
379 | This option enables support for the HPT 343/363 | |
380 | PATA controllers via the new ATA layer | |
381 | ||
382 | If unsure, say N. | |
383 | ||
66e7da4e AC |
384 | config PATA_HPT3X3_DMA |
385 | bool "HPT 343/363 DMA support (Experimental)" | |
386 | depends on PATA_HPT3X3 | |
387 | help | |
388 | This option enables DMA support for the HPT343/363 | |
389 | controllers. Enable with care as there are still some | |
390 | problems with DMA on this chipset. | |
391 | ||
669a5db4 | 392 | config PATA_ISAPNP |
942d0947 | 393 | tristate "ISA Plug and Play PATA support (Experimental)" |
669a5db4 JG |
394 | depends on EXPERIMENTAL && ISAPNP |
395 | help | |
396 | This option enables support for ISA plug & play ATA | |
397 | controllers such as those found on old soundcards. | |
398 | ||
399 | If unsure, say N. | |
400 | ||
669a5db4 | 401 | config PATA_IT821X |
942d0947 AC |
402 | tristate "IT8211/2 PATA support" |
403 | depends on PCI | |
669a5db4 JG |
404 | help |
405 | This option enables support for the ITE 8211 and 8212 | |
406 | PATA controllers via the new ATA layer, including RAID | |
407 | mode. | |
408 | ||
409 | If unsure, say N. | |
410 | ||
9b13b682 A |
411 | config PATA_IT8213 |
412 | tristate "IT8213 PATA support (Experimental)" | |
413 | depends on PCI && EXPERIMENTAL | |
414 | help | |
415 | This option enables support for the ITE 821 PATA | |
416 | controllers via the new ATA layer. | |
417 | ||
418 | If unsure, say N. | |
419 | ||
406176ee JG |
420 | config PATA_JMICRON |
421 | tristate "JMicron PATA support" | |
422 | depends on PCI | |
423 | help | |
424 | Enable support for the JMicron IDE controller, via the new | |
425 | ATA layer. | |
426 | ||
427 | If unsure, say N. | |
428 | ||
669a5db4 JG |
429 | config PATA_LEGACY |
430 | tristate "Legacy ISA PATA support (Experimental)" | |
4735ebed | 431 | depends on ISA && EXPERIMENTAL |
669a5db4 JG |
432 | help |
433 | This option enables support for ISA/VLB bus legacy PATA | |
434 | ports and allows them to be accessed via the new ATA layer. | |
435 | ||
436 | If unsure, say N. | |
437 | ||
438 | config PATA_TRIFLEX | |
439 | tristate "Compaq Triflex PATA support" | |
440 | depends on PCI | |
441 | help | |
442 | Enable support for the Compaq 'Triflex' IDE controller as found | |
443 | on many Compaq Pentium-Pro systems, via the new ATA layer. | |
444 | ||
445 | If unsure, say N. | |
446 | ||
75742cb4 AC |
447 | config PATA_MARVELL |
448 | tristate "Marvell PATA support via legacy mode" | |
449 | depends on PCI | |
450 | help | |
451 | This option enables limited support for the Marvell 88SE6145 ATA | |
452 | controller. | |
453 | ||
454 | If unsure, say N. | |
455 | ||
155d2916 SM |
456 | config PATA_MPC52xx |
457 | tristate "Freescale MPC52xx SoC internal IDE" | |
458 | depends on PPC_MPC52xx | |
459 | help | |
460 | This option enables support for integrated IDE controller | |
461 | of the Freescale MPC52xx SoC. | |
462 | ||
463 | If unsure, say N. | |
464 | ||
669a5db4 JG |
465 | config PATA_MPIIX |
466 | tristate "Intel PATA MPIIX support" | |
467 | depends on PCI | |
468 | help | |
469 | This option enables support for MPIIX PATA support. | |
470 | ||
471 | If unsure, say N. | |
472 | ||
473 | config PATA_OLDPIIX | |
942d0947 AC |
474 | tristate "Intel PATA old PIIX support" |
475 | depends on PCI | |
669a5db4 | 476 | help |
942d0947 | 477 | This option enables support for early PIIX PATA support. |
669a5db4 JG |
478 | |
479 | If unsure, say N. | |
480 | ||
481 | config PATA_NETCELL | |
482 | tristate "NETCELL Revolution RAID support" | |
483 | depends on PCI | |
484 | help | |
485 | This option enables support for the Netcell Revolution RAID | |
486 | PATA controller. | |
487 | ||
488 | If unsure, say N. | |
489 | ||
51dbd490 AC |
490 | config PATA_NINJA32 |
491 | tristate "Ninja32/Delkin Cardbus ATA support (Experimental)" | |
492 | depends on PCI && EXPERIMENTAL | |
493 | help | |
494 | This option enables support for the Ninja32, Delkin and | |
495 | possibly other brands of Cardbus ATA adapter | |
496 | ||
497 | If unsure, say N. | |
498 | ||
669a5db4 JG |
499 | config PATA_NS87410 |
500 | tristate "Nat Semi NS87410 PATA support (Experimental)" | |
501 | depends on PCI && EXPERIMENTAL | |
502 | help | |
503 | This option enables support for the National Semiconductor | |
504 | NS87410 PCI-IDE controller. | |
505 | ||
506 | If unsure, say N. | |
507 | ||
c4b5b7b6 AC |
508 | config PATA_NS87415 |
509 | tristate "Nat Semi NS87415 PATA support (Experimental)" | |
510 | depends on PCI && EXPERIMENTAL | |
511 | help | |
512 | This option enables support for the National Semiconductor | |
513 | NS87415 PCI-IDE controller. | |
514 | ||
515 | If unsure, say N. | |
516 | ||
669a5db4 JG |
517 | config PATA_OPTI |
518 | tristate "OPTI621/6215 PATA support (Very Experimental)" | |
519 | depends on PCI && EXPERIMENTAL | |
520 | help | |
521 | This option enables full PIO support for the early Opti ATA | |
522 | controllers found on some old motherboards. | |
523 | ||
524 | If unsure, say N. | |
525 | ||
526 | config PATA_OPTIDMA | |
516e72cb | 527 | tristate "OPTI FireStar PATA support (Very Experimental)" |
669a5db4 JG |
528 | depends on PCI && EXPERIMENTAL |
529 | help | |
530 | This option enables DMA/PIO support for the later OPTi | |
531 | controllers found on some old motherboards and in some | |
3dde6ad8 | 532 | laptops. |
669a5db4 JG |
533 | |
534 | If unsure, say N. | |
535 | ||
536 | config PATA_PCMCIA | |
537 | tristate "PCMCIA PATA support" | |
538 | depends on PCMCIA | |
539 | help | |
540 | This option enables support for PCMCIA ATA interfaces, including | |
541 | compact flash card adapters via the new ATA layer. | |
542 | ||
543 | If unsure, say N. | |
544 | ||
545 | config PATA_PDC_OLD | |
942d0947 | 546 | tristate "Older Promise PATA controller support (Experimental)" |
669a5db4 JG |
547 | depends on PCI && EXPERIMENTAL |
548 | help | |
549 | This option enables support for the Promise 20246, 20262, 20263, | |
550 | 20265 and 20267 adapters. | |
551 | ||
552 | If unsure, say N. | |
553 | ||
554 | config PATA_QDI | |
555 | tristate "QDI VLB PATA support" | |
4735ebed | 556 | depends on ISA |
669a5db4 JG |
557 | help |
558 | Support for QDI 6500 and 6580 PATA controllers on VESA local bus. | |
559 | ||
560 | config PATA_RADISYS | |
942d0947 | 561 | tristate "RADISYS 82600 PATA support (Very Experimental)" |
669a5db4 JG |
562 | depends on PCI && EXPERIMENTAL |
563 | help | |
564 | This option enables support for the RADISYS 82600 | |
565 | PATA controllers via the new ATA layer | |
566 | ||
567 | If unsure, say N. | |
568 | ||
3dd654bf RB |
569 | config PATA_RB532 |
570 | tristate "RouterBoard 532 PATA CompactFlash support" | |
571 | depends on MIKROTIK_RB532 | |
3db691da | 572 | help |
3dd654bf | 573 | This option enables support for the RouterBoard 532 |
3db691da FF |
574 | PATA CompactFlash controller. |
575 | ||
576 | If unsure, say N. | |
577 | ||
669a5db4 JG |
578 | config PATA_RZ1000 |
579 | tristate "PC Tech RZ1000 PATA support" | |
580 | depends on PCI | |
581 | help | |
582 | This option enables basic support for the PC Tech RZ1000/1 | |
583 | PATA controllers via the new ATA layer | |
584 | ||
585 | If unsure, say N. | |
586 | ||
587 | config PATA_SC1200 | |
942d0947 | 588 | tristate "SC1200 PATA support (Very Experimental)" |
669a5db4 JG |
589 | depends on PCI && EXPERIMENTAL |
590 | help | |
591 | This option enables support for the NatSemi/AMD SC1200 SoC | |
592 | companion chip used with the Geode processor family. | |
593 | ||
594 | If unsure, say N. | |
595 | ||
596 | config PATA_SERVERWORKS | |
942d0947 AC |
597 | tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" |
598 | depends on PCI | |
669a5db4 JG |
599 | help |
600 | This option enables support for the Serverworks OSB4/CSB5/CSB6 and | |
601 | HT1000 PATA controllers, via the new ATA layer. | |
602 | ||
603 | If unsure, say N. | |
604 | ||
605 | config PATA_PDC2027X | |
606 | tristate "Promise PATA 2027x support" | |
607 | depends on PCI | |
608 | help | |
609 | This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. | |
610 | ||
611 | If unsure, say N. | |
612 | ||
613 | config PATA_SIL680 | |
614 | tristate "CMD / Silicon Image 680 PATA support" | |
615 | depends on PCI | |
616 | help | |
617 | This option enables support for CMD / Silicon Image 680 PATA. | |
618 | ||
619 | If unsure, say N. | |
620 | ||
621 | config PATA_SIS | |
622 | tristate "SiS PATA support (Experimental)" | |
623 | depends on PCI && EXPERIMENTAL | |
624 | help | |
625 | This option enables support for SiS PATA controllers | |
626 | ||
627 | If unsure, say N. | |
628 | ||
629 | config PATA_VIA | |
630 | tristate "VIA PATA support" | |
631 | depends on PCI | |
632 | help | |
633 | This option enables support for the VIA PATA interfaces | |
634 | found on the many VIA chipsets. | |
635 | ||
636 | If unsure, say N. | |
637 | ||
638 | config PATA_WINBOND | |
639 | tristate "Winbond SL82C105 PATA support" | |
640 | depends on PCI | |
641 | help | |
642 | This option enables support for SL82C105 PATA devices found in the | |
643 | Netwinder and some other systems | |
644 | ||
645 | If unsure, say N. | |
646 | ||
7e45b0e5 AC |
647 | config PATA_WINBOND_VLB |
648 | tristate "Winbond W83759A VLB PATA support (Experimental)" | |
649 | depends on ISA && EXPERIMENTAL | |
650 | help | |
651 | Support for the Winbond W83759A controller on Vesa Local Bus | |
652 | systems. | |
653 | ||
cc18e0fe BD |
654 | config HAVE_PATA_PLATFORM |
655 | bool | |
656 | help | |
657 | This is an internal configuration node for any machine that | |
658 | uses pata-platform driver to enable the relevant driver in the | |
659 | configuration structure without having to submit endless patches | |
660 | to update the PATA_PLATFORM entry. | |
661 | ||
a20c9e82 PM |
662 | config PATA_PLATFORM |
663 | tristate "Generic platform device PATA support" | |
cc18e0fe | 664 | depends on EMBEDDED || ARCH_RPC || PPC || HAVE_PATA_PLATFORM |
a20c9e82 PM |
665 | help |
666 | This option enables support for generic directly connected ATA | |
667 | devices commonly found on embedded systems. | |
668 | ||
669 | If unsure, say N. | |
61f71621 AV |
670 | |
671 | config PATA_OF_PLATFORM | |
672 | tristate "OpenFirmware platform device PATA support" | |
673 | depends on PATA_PLATFORM && PPC_OF | |
674 | help | |
675 | This option enables support for generic directly connected ATA | |
676 | devices commonly found on embedded systems with OpenFirmware | |
677 | bindings. | |
678 | ||
679 | If unsure, say N. | |
a20c9e82 | 680 | |
73b6a2be RK |
681 | config PATA_ICSIDE |
682 | tristate "Acorn ICS PATA support" | |
683 | depends on ARM && ARCH_ACORN | |
684 | help | |
685 | On Acorn systems, say Y here if you wish to use the ICS PATA | |
686 | interface card. This is not required for ICS partition support. | |
687 | If you are unsure, say N to this. | |
688 | ||
0df0d0a0 AZ |
689 | config PATA_IXP4XX_CF |
690 | tristate "IXP4XX Compact Flash support" | |
691 | depends on ARCH_IXP4XX | |
692 | help | |
693 | This option enables support for a Compact Flash connected on | |
694 | the ixp4xx expansion bus. This driver had been written for | |
695 | Loft/Avila boards in mind but can work with others. | |
696 | ||
697 | If unsure, say N. | |
698 | ||
a619f981 AI |
699 | config PATA_SCC |
700 | tristate "Toshiba's Cell Reference Set IDE support" | |
aeb9362a | 701 | depends on PCI && PPC_CELLEB |
a619f981 AI |
702 | help |
703 | This option enables support for the built-in IDE controller on | |
704 | Toshiba Cell Reference Board. | |
705 | ||
706 | If unsure, say N. | |
707 | ||
07ab85de AD |
708 | config PATA_SCH |
709 | tristate "Intel SCH PATA support" | |
710 | depends on PCI | |
711 | help | |
712 | This option enables support for Intel SCH PATA on the Intel | |
713 | SCH (US15W, US15L, UL11L) series host controllers. | |
714 | ||
715 | If unsure, say N. | |
716 | ||
d830d173 SZ |
717 | config PATA_BF54X |
718 | tristate "Blackfin 54x ATAPI support" | |
719 | depends on BF542 || BF548 || BF549 | |
720 | help | |
721 | This option enables support for the built-in ATAPI controller on | |
722 | Blackfin 54x family chips. | |
723 | ||
724 | If unsure, say N. | |
725 | ||
127102ae | 726 | endif # ATA_SFF |
b196fc69 | 727 | endif # ATA |