Commit | Line | Data |
---|---|---|
421b20b9 JG |
1 | # |
2 | # SATA/PATA driver configuration | |
3 | # | |
4 | ||
2ad2c320 NB |
5 | config HAVE_PATA_PLATFORM |
6 | bool | |
7 | help | |
8 | This is an internal configuration node for any machine that | |
9 | uses pata-platform driver to enable the relevant driver in the | |
10 | configuration structure without having to submit endless patches | |
11 | to update the PATA_PLATFORM entry. | |
12 | ||
b196fc69 | 13 | menuconfig ATA |
e478cffd | 14 | tristate "Serial ATA and Parallel ATA drivers (libata)" |
e25df120 | 15 | depends on HAS_IOMEM |
bf2d401b | 16 | depends on BLOCK |
0383a68c | 17 | depends on !(M32R || M68K || S390) || BROKEN |
81ce3c4b | 18 | select SCSI |
428ac5fc | 19 | select GLOB |
c6fd2807 | 20 | ---help--- |
e478cffd | 21 | If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or |
c6fd2807 JG |
22 | any other ATA device under Linux, say Y and make sure that you know |
23 | the name of your ATA host adapter (the card inside your computer | |
24 | that "speaks" the ATA protocol, also called ATA controller), | |
25 | because you will be asked for it. | |
26 | ||
abcdceb9 RD |
27 | NOTE: ATA enables basic SCSI support; *however*, |
28 | 'SCSI disk support', 'SCSI tape support', or | |
29 | 'SCSI CDROM support' may also be needed, | |
30 | depending on your hardware configuration. | |
31 | ||
81ce3c4b JG |
32 | if ATA |
33 | ||
8cdf92a9 DW |
34 | config ATA_NONSTANDARD |
35 | bool | |
36 | default n | |
37 | ||
6521148c RH |
38 | config ATA_VERBOSE_ERROR |
39 | bool "Verbose ATA error reporting" | |
40 | default y | |
41 | help | |
42 | This option adds parsing of ATA command descriptions and error bits | |
43 | in libata kernel output, making it easier to interpret. | |
44 | This option will enlarge the kernel by approx. 6KB. Disable it only | |
45 | if kernel size is more important than ease of debugging. | |
46 | ||
47 | If unsure, say Y. | |
48 | ||
e92351bb | 49 | config ATA_ACPI |
c30484d7 | 50 | bool "ATA ACPI Support" |
2051e924 | 51 | depends on ACPI |
e92351bb TH |
52 | default y |
53 | help | |
54 | This option adds support for ATA-related ACPI objects. | |
55 | These ACPI objects add the ability to retrieve taskfiles | |
56 | from the ACPI BIOS and write them to the disk controller. | |
57 | These objects may be related to performance, security, | |
58 | power management, or other areas. | |
59 | You can disable this at kernel boot time by using the | |
60 | option libata.noacpi=1 | |
61 | ||
afe75951 | 62 | config SATA_ZPODD |
e189551b | 63 | bool "SATA Zero Power Optical Disc Drive (ZPODD) support" |
1b3e3aa6 | 64 | depends on ATA_ACPI && PM |
afe75951 AL |
65 | default n |
66 | help | |
e189551b AL |
67 | This option adds support for SATA Zero Power Optical Disc |
68 | Drive (ZPODD). It requires both the ODD and the platform | |
69 | support, and if enabled, will automatically power on/off the | |
70 | ODD when certain condition is satisfied. This does not impact | |
71 | end user's experience of the ODD, only power is saved when | |
72 | the ODD is not in use (i.e. no disc inside). | |
afe75951 AL |
73 | |
74 | If unsure, say N. | |
75 | ||
88fcd562 TH |
76 | config SATA_PMP |
77 | bool "SATA Port Multiplier support" | |
78 | default y | |
79 | help | |
f3360ebf JG |
80 | This option adds support for SATA Port Multipliers |
81 | (the SATA version of an ethernet hub, or SAS expander). | |
88fcd562 | 82 | |
9a7780c9 TH |
83 | comment "Controllers with non-SFF native interface" |
84 | ||
8ad92ba7 | 85 | config SATA_AHCI |
c6fd2807 | 86 | tristate "AHCI SATA support" |
81ce3c4b | 87 | depends on PCI |
c6fd2807 JG |
88 | help |
89 | This option enables support for AHCI Serial ATA. | |
90 | ||
91 | If unsure, say N. | |
92 | ||
1c2a49f6 AV |
93 | config SATA_AHCI_PLATFORM |
94 | tristate "Platform AHCI SATA support" | |
95 | help | |
96 | This option enables support for Platform AHCI Serial ATA | |
97 | controllers. | |
98 | ||
99 | If unsure, say N. | |
100 | ||
766a2d97 BN |
101 | config AHCI_BRCMSTB |
102 | tristate "Broadcom STB AHCI SATA support" | |
1980eb9b | 103 | depends on ARCH_BRCMSTB || BMIPS_GENERIC |
766a2d97 BN |
104 | help |
105 | This option enables support for the AHCI SATA3 controller found on | |
106 | STB SoC's. | |
107 | ||
108 | If unsure, say N. | |
109 | ||
ae8723f8 BZ |
110 | config AHCI_DA850 |
111 | tristate "DaVinci DA850 AHCI SATA support" | |
112 | depends on ARCH_DAVINCI_DA850 | |
113 | help | |
114 | This option enables support for the DaVinci DA850 SoC's | |
115 | onboard AHCI SATA. | |
116 | ||
117 | If unsure, say N. | |
118 | ||
4a2e5123 LJ |
119 | config AHCI_ST |
120 | tristate "ST AHCI SATA support" | |
48c54df1 | 121 | depends on ARCH_STI |
76884cb2 | 122 | help |
4a2e5123 | 123 | This option enables support for ST AHCI SATA controller. |
76884cb2 LJ |
124 | |
125 | If unsure, say N. | |
126 | ||
9e54eae2 RZ |
127 | config AHCI_IMX |
128 | tristate "Freescale i.MX AHCI SATA support" | |
f5f85ee0 | 129 | depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST) |
9e54eae2 RZ |
130 | help |
131 | This option enables support for the Freescale i.MX SoC's | |
132 | onboard AHCI SATA. | |
133 | ||
134 | If unsure, say N. | |
135 | ||
a73ed350 SG |
136 | config AHCI_CEVA |
137 | tristate "CEVA AHCI SATA support" | |
138 | depends on OF | |
139 | help | |
140 | This option enables support for the CEVA AHCI SATA. | |
141 | It can be found on the Xilinx Zynq UltraScale+ MPSoC. | |
142 | ||
143 | If unsure, say N. | |
144 | ||
a3464ed2 TP |
145 | config AHCI_MVEBU |
146 | tristate "Marvell EBU AHCI SATA support" | |
147 | depends on ARCH_MVEBU | |
148 | help | |
149 | This option enables support for the Marvebu EBU SoC's | |
150 | onboard AHCI SATA. | |
151 | ||
152 | If unsure, say N. | |
153 | ||
a2127e40 AM |
154 | config AHCI_OCTEON |
155 | tristate "Cavium Octeon Soc Serial ATA" | |
156 | depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC | |
157 | default y | |
158 | help | |
159 | This option enables support for Cavium Octeon SoC Serial ATA. | |
160 | ||
161 | If unsure, say N. | |
162 | ||
c5754b52 OS |
163 | config AHCI_SUNXI |
164 | tristate "Allwinner sunxi AHCI SATA support" | |
fd990556 | 165 | depends on ARCH_SUNXI |
c5754b52 OS |
166 | help |
167 | This option enables support for the Allwinner sunxi SoC's | |
168 | onboard AHCI SATA. | |
169 | ||
170 | If unsure, say N. | |
171 | ||
ccfde508 MP |
172 | config AHCI_TEGRA |
173 | tristate "NVIDIA Tegra124 AHCI SATA support" | |
174 | depends on ARCH_TEGRA | |
175 | help | |
176 | This option enables support for the NVIDIA Tegra124 SoC's | |
177 | onboard AHCI SATA. | |
178 | ||
179 | If unsure, say N. | |
180 | ||
81d01bfa LH |
181 | config AHCI_XGENE |
182 | tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support" | |
74c03eb6 | 183 | depends on PHY_XGENE |
81d01bfa LH |
184 | help |
185 | This option enables support for APM X-Gene SoC SATA host controller. | |
186 | ||
ecfb4598 TY |
187 | config AHCI_QORIQ |
188 | tristate "Freescale QorIQ AHCI SATA support" | |
189 | depends on OF | |
190 | help | |
191 | This option enables support for the Freescale QorIQ AHCI SoC's | |
192 | onboard AHCI SATA. | |
193 | ||
194 | If unsure, say N. | |
195 | ||
9a7780c9 TH |
196 | config SATA_FSL |
197 | tristate "Freescale 3.0Gbps SATA support" | |
198 | depends on FSL_SOC | |
127102ae | 199 | help |
9a7780c9 TH |
200 | This option enables support for Freescale 3.0Gbps SATA controller. |
201 | It can be found on MPC837x and MPC8315. | |
127102ae TH |
202 | |
203 | If unsure, say N. | |
204 | ||
535dac4a BS |
205 | config SATA_AHCI_SEATTLE |
206 | tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support" | |
207 | depends on ARCH_SEATTLE | |
208 | help | |
209 | This option enables support for AMD Seattle SATA host controller. | |
210 | ||
211 | If unsure, say N | |
212 | ||
6f791460 | 213 | config SATA_INIC162X |
bb969619 | 214 | tristate "Initio 162x SATA support (Very Experimental)" |
6f791460 TH |
215 | depends on PCI |
216 | help | |
217 | This option enables support for Initio 162x Serial ATA. | |
218 | ||
02cdfcf0 DM |
219 | config SATA_ACARD_AHCI |
220 | tristate "ACard AHCI variant (ATP 8620)" | |
221 | depends on PCI | |
222 | help | |
223 | This option enables support for Acard. | |
224 | ||
225 | If unsure, say N. | |
226 | ||
9a7780c9 TH |
227 | config SATA_SIL24 |
228 | tristate "Silicon Image 3124/3132 SATA support" | |
229 | depends on PCI | |
127102ae | 230 | help |
9a7780c9 | 231 | This option enables support for Silicon Image 3124/3132 Serial ATA. |
127102ae TH |
232 | |
233 | If unsure, say N. | |
234 | ||
235 | config ATA_SFF | |
ebd60028 | 236 | bool "ATA SFF support (for legacy IDE and PATA)" |
127102ae TH |
237 | default y |
238 | help | |
239 | This option adds support for ATA controllers with SFF | |
240 | compliant or similar programming interface. | |
241 | ||
f3360ebf JG |
242 | SFF is the legacy IDE interface that has been around since |
243 | the dawn of time. Almost all PATA controllers have an | |
244 | SFF interface. Many SATA controllers have an SFF interface | |
245 | when configured into a legacy compatibility mode. | |
246 | ||
247 | For users with exclusively modern controllers like AHCI, | |
248 | Silicon Image 3124, or Marvell 6440, you may choose to | |
692105b8 | 249 | disable this unneeded SFF support. |
f3360ebf JG |
250 | |
251 | If unsure, say Y. | |
252 | ||
127102ae TH |
253 | if ATA_SFF |
254 | ||
9a7780c9 TH |
255 | comment "SFF controllers with custom DMA interface" |
256 | ||
257 | config PDC_ADMA | |
258 | tristate "Pacific Digital ADMA support" | |
81ce3c4b | 259 | depends on PCI |
c6fd2807 | 260 | help |
9a7780c9 TH |
261 | This option enables support for Pacific Digital ADMA controllers |
262 | ||
263 | If unsure, say N. | |
264 | ||
9a7780c9 TH |
265 | config PATA_OCTEON_CF |
266 | tristate "OCTEON Boot Bus Compact Flash support" | |
9ddebc46 | 267 | depends on CAVIUM_OCTEON_SOC |
9a7780c9 TH |
268 | help |
269 | This option enables a polled compact flash driver for use with | |
270 | compact flash cards attached to the OCTEON boot bus. | |
271 | ||
272 | If unsure, say N. | |
273 | ||
274 | config SATA_QSTOR | |
275 | tristate "Pacific Digital SATA QStor support" | |
276 | depends on PCI | |
277 | help | |
278 | This option enables support for Pacific Digital Serial ATA QStor. | |
279 | ||
280 | If unsure, say N. | |
281 | ||
282 | config SATA_SX4 | |
283 | tristate "Promise SATA SX4 support (Experimental)" | |
48b3de21 | 284 | depends on PCI |
9a7780c9 TH |
285 | help |
286 | This option enables support for Promise Serial ATA SX4. | |
c6fd2807 JG |
287 | |
288 | If unsure, say N. | |
289 | ||
9a7780c9 TH |
290 | config ATA_BMDMA |
291 | bool "ATA BMDMA support" | |
292 | default y | |
293 | help | |
294 | This option adds support for SFF ATA controllers with BMDMA | |
ed4e2f80 SR |
295 | capability. BMDMA stands for bus-master DMA and is the |
296 | de facto DMA interface for SFF controllers. | |
9a7780c9 | 297 | |
ed4e2f80 | 298 | If unsure, say Y. |
9a7780c9 TH |
299 | |
300 | if ATA_BMDMA | |
301 | ||
302 | comment "SATA SFF controllers with BMDMA" | |
303 | ||
8ad92ba7 | 304 | config ATA_PIIX |
2c7620d5 | 305 | tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" |
81ce3c4b | 306 | depends on PCI |
c6fd2807 | 307 | help |
2bfc3611 | 308 | This option enables support for ICH5/6/7/8 Serial ATA |
2c7620d5 A |
309 | and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series |
310 | host controllers. | |
c6fd2807 JG |
311 | |
312 | If unsure, say N. | |
313 | ||
62936009 RS |
314 | config SATA_DWC |
315 | tristate "DesignWare Cores SATA support" | |
7598469a | 316 | depends on DMADEVICES |
0f48debd | 317 | select GENERIC_PHY |
62936009 RS |
318 | help |
319 | This option enables support for the on-chip SATA controller of the | |
320 | AppliedMicro processor 460EX. | |
321 | ||
322 | If unsure, say N. | |
323 | ||
50b43375 MR |
324 | config SATA_DWC_OLD_DMA |
325 | bool "Support old device trees" | |
326 | depends on SATA_DWC | |
327 | select DW_DMAC_CORE | |
328 | default y if 460EX | |
329 | help | |
330 | This option enables support for old device trees without the | |
331 | "dmas" property. | |
332 | ||
14080fa6 SS |
333 | config SATA_DWC_DEBUG |
334 | bool "Debugging driver version" | |
335 | depends on SATA_DWC | |
336 | help | |
337 | This option enables debugging output in the driver. | |
338 | ||
339 | config SATA_DWC_VDEBUG | |
340 | bool "Verbose debug output" | |
341 | depends on SATA_DWC_DEBUG | |
342 | help | |
343 | This option enables the taskfile dumping and NCQ debugging. | |
344 | ||
8996b89d ML |
345 | config SATA_HIGHBANK |
346 | tristate "Calxeda Highbank SATA support" | |
0b99f864 | 347 | depends on ARCH_HIGHBANK || COMPILE_TEST |
8996b89d ML |
348 | help |
349 | This option enables support for the Calxeda Highbank SoC's | |
350 | onboard SATA. | |
351 | ||
352 | If unsure, say N. | |
353 | ||
8ad92ba7 | 354 | config SATA_MV |
f9228c7f | 355 | tristate "Marvell SATA support" |
4efded05 | 356 | depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ |
03803ef6 | 357 | ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST |
49c8f1ff | 358 | select GENERIC_PHY |
c6fd2807 JG |
359 | help |
360 | This option enables support for the Marvell Serial ATA family. | |
f9228c7f ML |
361 | Currently supports 88SX[56]0[48][01] PCI(-X) chips, |
362 | as well as the newer [67]042 PCI-X/PCIe and SOC devices. | |
c6fd2807 JG |
363 | |
364 | If unsure, say N. | |
365 | ||
8ad92ba7 | 366 | config SATA_NV |
c6fd2807 | 367 | tristate "NVIDIA SATA support" |
81ce3c4b | 368 | depends on PCI |
c6fd2807 JG |
369 | help |
370 | This option enables support for NVIDIA Serial ATA. | |
371 | ||
372 | If unsure, say N. | |
373 | ||
8ad92ba7 | 374 | config SATA_PROMISE |
c6fd2807 | 375 | tristate "Promise SATA TX2/TX4 support" |
81ce3c4b | 376 | depends on PCI |
c6fd2807 JG |
377 | help |
378 | This option enables support for Promise Serial ATA TX2/TX4. | |
379 | ||
380 | If unsure, say N. | |
381 | ||
163cf81d VB |
382 | config SATA_RCAR |
383 | tristate "Renesas R-Car SATA support" | |
51b1b286 | 384 | depends on ARCH_RENESAS || COMPILE_TEST |
163cf81d VB |
385 | help |
386 | This option enables support for Renesas R-Car Serial ATA. | |
387 | ||
388 | If unsure, say N. | |
c6fd2807 | 389 | |
8ad92ba7 | 390 | config SATA_SIL |
c6fd2807 | 391 | tristate "Silicon Image SATA support" |
81ce3c4b | 392 | depends on PCI |
c6fd2807 JG |
393 | help |
394 | This option enables support for Silicon Image Serial ATA. | |
395 | ||
396 | If unsure, say N. | |
397 | ||
8ad92ba7 | 398 | config SATA_SIS |
9b14dec5 | 399 | tristate "SiS 964/965/966/180 SATA support" |
81ce3c4b | 400 | depends on PCI |
9b14dec5 | 401 | select PATA_SIS |
c6fd2807 | 402 | help |
a617c09f | 403 | This option enables support for SiS Serial ATA on |
9b14dec5 A |
404 | SiS 964/965/966/180 and Parallel ATA on SiS 180. |
405 | The PATA support for SiS 180 requires additionally to | |
406 | enable the PATA_SIS driver in the config. | |
c6fd2807 JG |
407 | If unsure, say N. |
408 | ||
9a7780c9 TH |
409 | config SATA_SVW |
410 | tristate "ServerWorks Frodo / Apple K2 SATA support" | |
411 | depends on PCI | |
412 | help | |
413 | This option enables support for Broadcom/Serverworks/Apple K2 | |
414 | SATA support. | |
415 | ||
416 | If unsure, say N. | |
417 | ||
8ad92ba7 | 418 | config SATA_ULI |
c6fd2807 | 419 | tristate "ULi Electronics SATA support" |
81ce3c4b | 420 | depends on PCI |
c6fd2807 JG |
421 | help |
422 | This option enables support for ULi Electronics SATA. | |
423 | ||
424 | If unsure, say N. | |
425 | ||
8ad92ba7 | 426 | config SATA_VIA |
c6fd2807 | 427 | tristate "VIA SATA support" |
81ce3c4b | 428 | depends on PCI |
c6fd2807 JG |
429 | help |
430 | This option enables support for VIA Serial ATA. | |
431 | ||
432 | If unsure, say N. | |
433 | ||
8ad92ba7 | 434 | config SATA_VITESSE |
c6fd2807 | 435 | tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" |
81ce3c4b | 436 | depends on PCI |
c6fd2807 JG |
437 | help |
438 | This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. | |
439 | ||
440 | If unsure, say N. | |
441 | ||
9a7780c9 | 442 | comment "PATA SFF controllers with BMDMA" |
025621f9 | 443 | |
669a5db4 | 444 | config PATA_ALI |
e3389cbc AC |
445 | tristate "ALi PATA support" |
446 | depends on PCI | |
669a5db4 JG |
447 | help |
448 | This option enables support for the ALi ATA interfaces | |
449 | found on the many ALi chipsets. | |
450 | ||
451 | If unsure, say N. | |
452 | ||
453 | config PATA_AMD | |
942d0947 | 454 | tristate "AMD/NVidia PATA support" |
669a5db4 JG |
455 | depends on PCI |
456 | help | |
457 | This option enables support for the AMD and NVidia PATA | |
458 | interfaces found on the chipsets for Athlon/Athlon64. | |
459 | ||
460 | If unsure, say N. | |
461 | ||
a480167b VK |
462 | config PATA_ARASAN_CF |
463 | tristate "ARASAN CompactFlash PATA Controller Support" | |
e638433b | 464 | depends on ARCH_SPEAR13XX || COMPILE_TEST |
3b5ec274 | 465 | depends on DMADEVICES |
a480167b VK |
466 | select DMA_ENGINE |
467 | help | |
468 | Say Y here to support the ARASAN CompactFlash PATA controller | |
469 | ||
669a5db4 | 470 | config PATA_ARTOP |
c645fd34 AC |
471 | tristate "ARTOP 6210/6260 PATA support" |
472 | depends on PCI | |
669a5db4 JG |
473 | help |
474 | This option enables support for ARTOP PATA controllers. | |
475 | ||
476 | If unsure, say N. | |
477 | ||
9a7780c9 TH |
478 | config PATA_ATIIXP |
479 | tristate "ATI PATA support" | |
d15d6e6c JJIL |
480 | depends on PCI |
481 | help | |
9a7780c9 TH |
482 | This option enables support for the ATI ATA interfaces |
483 | found on the many ATI chipsets. | |
7c9ef8e4 KNG |
484 | |
485 | If unsure, say N. | |
486 | ||
9a7780c9 TH |
487 | config PATA_ATP867X |
488 | tristate "ARTOP/Acard ATP867X PATA support" | |
c645fd34 | 489 | depends on PCI |
669a5db4 | 490 | help |
9a7780c9 TH |
491 | This option enables support for ARTOP/Acard ATP867X PATA |
492 | controllers. | |
669a5db4 JG |
493 | |
494 | If unsure, say N. | |
495 | ||
9a7780c9 TH |
496 | config PATA_BF54X |
497 | tristate "Blackfin 54x ATAPI support" | |
498 | depends on BF542 || BF548 || BF549 | |
b2248dac | 499 | help |
9a7780c9 TH |
500 | This option enables support for the built-in ATAPI controller on |
501 | Blackfin 54x family chips. | |
b2248dac AC |
502 | |
503 | If unsure, say N. | |
504 | ||
669a5db4 | 505 | config PATA_CMD64X |
c645fd34 AC |
506 | tristate "CMD64x PATA support" |
507 | depends on PCI | |
669a5db4 JG |
508 | help |
509 | This option enables support for the CMD64x series chips | |
510 | except for the CMD640. | |
511 | ||
512 | If unsure, say N. | |
513 | ||
514 | config PATA_CS5520 | |
515 | tristate "CS5510/5520 PATA support" | |
9236a76d | 516 | depends on PCI && (X86_32 || COMPILE_TEST) |
669a5db4 JG |
517 | help |
518 | This option enables support for the Cyrix 5510/5520 | |
519 | companion chip used with the MediaGX/Geode processor family. | |
520 | ||
521 | If unsure, say N. | |
522 | ||
523 | config PATA_CS5530 | |
e3389cbc | 524 | tristate "CS5530 PATA support" |
9236a76d | 525 | depends on PCI && (X86_32 || COMPILE_TEST) |
669a5db4 JG |
526 | help |
527 | This option enables support for the Cyrix/NatSemi/AMD CS5530 | |
528 | companion chip used with the MediaGX/Geode processor family. | |
529 | ||
530 | If unsure, say N. | |
531 | ||
532 | config PATA_CS5535 | |
533 | tristate "CS5535 PATA support (Experimental)" | |
9236a76d | 534 | depends on PCI && X86_32 |
669a5db4 JG |
535 | help |
536 | This option enables support for the NatSemi/AMD CS5535 | |
537 | companion chip used with the Geode processor family. | |
538 | ||
539 | If unsure, say N. | |
540 | ||
3957df61 | 541 | config PATA_CS5536 |
e3389cbc | 542 | tristate "CS5536 PATA support" |
9236a76d | 543 | depends on PCI && (X86_32 || MIPS || COMPILE_TEST) |
3957df61 MP |
544 | help |
545 | This option enables support for the AMD CS5536 | |
546 | companion chip used with the Geode LX processor family. | |
547 | ||
548 | If unsure, say N. | |
549 | ||
669a5db4 JG |
550 | config PATA_CYPRESS |
551 | tristate "Cypress CY82C693 PATA support (Very Experimental)" | |
48b3de21 | 552 | depends on PCI |
669a5db4 JG |
553 | help |
554 | This option enables support for the Cypress/Contaq CY82C693 | |
555 | chipset found in some Alpha systems | |
556 | ||
557 | If unsure, say N. | |
558 | ||
559 | config PATA_EFAR | |
560 | tristate "EFAR SLC90E66 support" | |
561 | depends on PCI | |
562 | help | |
563 | This option enables support for the EFAR SLC90E66 | |
564 | IDE controller found on some older machines. | |
565 | ||
566 | If unsure, say N. | |
567 | ||
2fff2751 RP |
568 | config PATA_EP93XX |
569 | tristate "Cirrus Logic EP93xx PATA support" | |
570 | depends on ARCH_EP93XX | |
571 | help | |
572 | This option enables support for the PATA controller in | |
573 | the Cirrus Logic EP9312 and EP9315 ARM CPU. | |
574 | ||
575 | If unsure, say N. | |
576 | ||
669a5db4 | 577 | config PATA_HPT366 |
c645fd34 AC |
578 | tristate "HPT 366/368 PATA support" |
579 | depends on PCI | |
669a5db4 JG |
580 | help |
581 | This option enables support for the HPT 366 and 368 | |
582 | PATA controllers via the new ATA layer. | |
583 | ||
584 | If unsure, say N. | |
585 | ||
586 | config PATA_HPT37X | |
be315d46 AC |
587 | tristate "HPT 370/370A/371/372/374/302 PATA support" |
588 | depends on PCI | |
669a5db4 JG |
589 | help |
590 | This option enables support for the majority of the later HPT | |
591 | PATA controllers via the new ATA layer. | |
592 | ||
593 | If unsure, say N. | |
594 | ||
595 | config PATA_HPT3X2N | |
0ca646db | 596 | tristate "HPT 371N/372N/302N PATA support" |
be315d46 | 597 | depends on PCI |
669a5db4 JG |
598 | help |
599 | This option enables support for the N variant HPT PATA | |
0ca646db | 600 | controllers via the new ATA layer. |
669a5db4 JG |
601 | |
602 | If unsure, say N. | |
603 | ||
604 | config PATA_HPT3X3 | |
66e7da4e | 605 | tristate "HPT 343/363 PATA support" |
669a5db4 JG |
606 | depends on PCI |
607 | help | |
608 | This option enables support for the HPT 343/363 | |
609 | PATA controllers via the new ATA layer | |
610 | ||
611 | If unsure, say N. | |
612 | ||
66e7da4e | 613 | config PATA_HPT3X3_DMA |
be315d46 | 614 | bool "HPT 343/363 DMA support" |
66e7da4e AC |
615 | depends on PATA_HPT3X3 |
616 | help | |
617 | This option enables DMA support for the HPT343/363 | |
618 | controllers. Enable with care as there are still some | |
619 | problems with DMA on this chipset. | |
620 | ||
9a7780c9 TH |
621 | config PATA_ICSIDE |
622 | tristate "Acorn ICS PATA support" | |
623 | depends on ARM && ARCH_ACORN | |
669a5db4 | 624 | help |
9a7780c9 TH |
625 | On Acorn systems, say Y here if you wish to use the ICS PATA |
626 | interface card. This is not required for ICS partition support. | |
627 | If you are unsure, say N to this. | |
628 | ||
e39c75cf APR |
629 | config PATA_IMX |
630 | tristate "PATA support for Freescale iMX" | |
631 | depends on ARCH_MXC | |
632 | help | |
633 | This option enables support for the PATA host available on Freescale | |
634 | iMX SoCs. | |
635 | ||
636 | If unsure, say N. | |
637 | ||
9a7780c9 TH |
638 | config PATA_IT8213 |
639 | tristate "IT8213 PATA support (Experimental)" | |
48b3de21 | 640 | depends on PCI |
9a7780c9 TH |
641 | help |
642 | This option enables support for the ITE 821 PATA | |
643 | controllers via the new ATA layer. | |
669a5db4 JG |
644 | |
645 | If unsure, say N. | |
646 | ||
669a5db4 | 647 | config PATA_IT821X |
942d0947 AC |
648 | tristate "IT8211/2 PATA support" |
649 | depends on PCI | |
669a5db4 JG |
650 | help |
651 | This option enables support for the ITE 8211 and 8212 | |
652 | PATA controllers via the new ATA layer, including RAID | |
653 | mode. | |
654 | ||
655 | If unsure, say N. | |
656 | ||
406176ee JG |
657 | config PATA_JMICRON |
658 | tristate "JMicron PATA support" | |
659 | depends on PCI | |
660 | help | |
661 | Enable support for the JMicron IDE controller, via the new | |
662 | ATA layer. | |
663 | ||
664 | If unsure, say N. | |
665 | ||
9a7780c9 TH |
666 | config PATA_MACIO |
667 | tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE" | |
668 | depends on PPC_PMAC | |
669a5db4 | 669 | help |
9a7780c9 TH |
670 | Most IDE capable PowerMacs have IDE busses driven by a variant |
671 | of this controller which is part of the Apple chipset used on | |
672 | most PowerMac models. Some models have multiple busses using | |
673 | different chipsets, though generally, MacIO is one of them. | |
669a5db4 | 674 | |
75742cb4 AC |
675 | config PATA_MARVELL |
676 | tristate "Marvell PATA support via legacy mode" | |
677 | depends on PCI | |
678 | help | |
5b66c829 AC |
679 | This option enables limited support for the Marvell 88SE61xx ATA |
680 | controllers. If you wish to use only the SATA ports then select | |
681 | the AHCI driver alone. If you wish to the use the PATA port or | |
682 | both SATA and PATA include this driver. | |
75742cb4 AC |
683 | |
684 | If unsure, say N. | |
685 | ||
869934ad WS |
686 | config PATA_MPC52xx |
687 | tristate "Freescale MPC52xx SoC internal IDE" | |
688 | depends on PPC_MPC52xx && PPC_BESTCOMM | |
689 | select PPC_BESTCOMM_ATA | |
690 | help | |
691 | This option enables support for integrated IDE controller | |
692 | of the Freescale MPC52xx SoC. | |
693 | ||
694 | If unsure, say N. | |
695 | ||
669a5db4 JG |
696 | config PATA_NETCELL |
697 | tristate "NETCELL Revolution RAID support" | |
698 | depends on PCI | |
699 | help | |
700 | This option enables support for the Netcell Revolution RAID | |
701 | PATA controller. | |
702 | ||
703 | If unsure, say N. | |
704 | ||
51dbd490 | 705 | config PATA_NINJA32 |
be315d46 AC |
706 | tristate "Ninja32/Delkin Cardbus ATA support" |
707 | depends on PCI | |
51dbd490 AC |
708 | help |
709 | This option enables support for the Ninja32, Delkin and | |
710 | possibly other brands of Cardbus ATA adapter | |
711 | ||
712 | If unsure, say N. | |
713 | ||
c4b5b7b6 | 714 | config PATA_NS87415 |
e3389cbc AC |
715 | tristate "Nat Semi NS87415 PATA support" |
716 | depends on PCI | |
c4b5b7b6 AC |
717 | help |
718 | This option enables support for the National Semiconductor | |
719 | NS87415 PCI-IDE controller. | |
720 | ||
721 | If unsure, say N. | |
722 | ||
9a7780c9 TH |
723 | config PATA_OLDPIIX |
724 | tristate "Intel PATA old PIIX support" | |
725 | depends on PCI | |
669a5db4 | 726 | help |
9a7780c9 | 727 | This option enables support for early PIIX PATA support. |
669a5db4 JG |
728 | |
729 | If unsure, say N. | |
730 | ||
731 | config PATA_OPTIDMA | |
516e72cb | 732 | tristate "OPTI FireStar PATA support (Very Experimental)" |
48b3de21 | 733 | depends on PCI |
669a5db4 JG |
734 | help |
735 | This option enables DMA/PIO support for the later OPTi | |
736 | controllers found on some old motherboards and in some | |
3dde6ad8 | 737 | laptops. |
669a5db4 JG |
738 | |
739 | If unsure, say N. | |
740 | ||
be315d46 AC |
741 | config PATA_PDC2027X |
742 | tristate "Promise PATA 2027x support" | |
743 | depends on PCI | |
744 | help | |
745 | This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. | |
746 | ||
747 | If unsure, say N. | |
748 | ||
669a5db4 | 749 | config PATA_PDC_OLD |
e3389cbc AC |
750 | tristate "Older Promise PATA controller support" |
751 | depends on PCI | |
669a5db4 JG |
752 | help |
753 | This option enables support for the Promise 20246, 20262, 20263, | |
754 | 20265 and 20267 adapters. | |
755 | ||
756 | If unsure, say N. | |
757 | ||
669a5db4 | 758 | config PATA_RADISYS |
e3389cbc | 759 | tristate "RADISYS 82600 PATA support (Experimental)" |
48b3de21 | 760 | depends on PCI |
669a5db4 JG |
761 | help |
762 | This option enables support for the RADISYS 82600 | |
763 | PATA controllers via the new ATA layer | |
764 | ||
765 | If unsure, say N. | |
766 | ||
6b406782 AC |
767 | config PATA_RDC |
768 | tristate "RDC PATA support" | |
769 | depends on PCI | |
770 | help | |
771 | This option enables basic support for the later RDC PATA controllers | |
772 | controllers via the new ATA layer. For the RDC 1010, you need to | |
773 | enable the IT821X driver instead. | |
774 | ||
775 | If unsure, say N. | |
776 | ||
9a7780c9 TH |
777 | config PATA_SC1200 |
778 | tristate "SC1200 PATA support" | |
840aa787 | 779 | depends on PCI && (X86_32 || COMPILE_TEST) |
669a5db4 | 780 | help |
9a7780c9 TH |
781 | This option enables support for the NatSemi/AMD SC1200 SoC |
782 | companion chip used with the Geode processor family. | |
669a5db4 JG |
783 | |
784 | If unsure, say N. | |
785 | ||
9a7780c9 TH |
786 | config PATA_SCH |
787 | tristate "Intel SCH PATA support" | |
e3389cbc | 788 | depends on PCI |
669a5db4 | 789 | help |
9a7780c9 TH |
790 | This option enables support for Intel SCH PATA on the Intel |
791 | SCH (US15W, US15L, UL11L) series host controllers. | |
669a5db4 JG |
792 | |
793 | If unsure, say N. | |
794 | ||
795 | config PATA_SERVERWORKS | |
942d0947 AC |
796 | tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" |
797 | depends on PCI | |
669a5db4 JG |
798 | help |
799 | This option enables support for the Serverworks OSB4/CSB5/CSB6 and | |
800 | HT1000 PATA controllers, via the new ATA layer. | |
801 | ||
802 | If unsure, say N. | |
803 | ||
669a5db4 JG |
804 | config PATA_SIL680 |
805 | tristate "CMD / Silicon Image 680 PATA support" | |
806 | depends on PCI | |
807 | help | |
808 | This option enables support for CMD / Silicon Image 680 PATA. | |
809 | ||
810 | If unsure, say N. | |
811 | ||
812 | config PATA_SIS | |
e3389cbc AC |
813 | tristate "SiS PATA support" |
814 | depends on PCI | |
669a5db4 JG |
815 | help |
816 | This option enables support for SiS PATA controllers | |
817 | ||
818 | If unsure, say N. | |
819 | ||
8e182a90 AC |
820 | config PATA_TOSHIBA |
821 | tristate "Toshiba Piccolo support (Experimental)" | |
48b3de21 | 822 | depends on PCI |
8e182a90 AC |
823 | help |
824 | Support for the Toshiba Piccolo controllers. Currently only the | |
825 | primary channel is supported by this driver. | |
826 | ||
827 | If unsure, say N. | |
828 | ||
9a7780c9 TH |
829 | config PATA_TRIFLEX |
830 | tristate "Compaq Triflex PATA support" | |
831 | depends on PCI | |
832 | help | |
833 | Enable support for the Compaq 'Triflex' IDE controller as found | |
834 | on many Compaq Pentium-Pro systems, via the new ATA layer. | |
835 | ||
836 | If unsure, say N. | |
837 | ||
669a5db4 JG |
838 | config PATA_VIA |
839 | tristate "VIA PATA support" | |
840 | depends on PCI | |
841 | help | |
842 | This option enables support for the VIA PATA interfaces | |
843 | found on the many VIA chipsets. | |
844 | ||
845 | If unsure, say N. | |
846 | ||
2dc6c6f1 MV |
847 | config PATA_PXA |
848 | tristate "PXA DMA-capable PATA support" | |
849 | depends on ARCH_PXA | |
850 | help | |
851 | This option enables support for harddrive attached to PXA CPU's bus. | |
852 | ||
853 | NOTE: This driver utilizes PXA DMA controller, in case your hardware | |
854 | is not capable of doing MWDMA, use pata_platform instead. | |
855 | ||
856 | If unsure, say N. | |
857 | ||
669a5db4 JG |
858 | config PATA_WINBOND |
859 | tristate "Winbond SL82C105 PATA support" | |
860 | depends on PCI | |
861 | help | |
862 | This option enables support for SL82C105 PATA devices found in the | |
863 | Netwinder and some other systems | |
864 | ||
865 | If unsure, say N. | |
866 | ||
9a7780c9 TH |
867 | endif # ATA_BMDMA |
868 | ||
869 | comment "PIO-only SFF controllers" | |
870 | ||
871 | config PATA_AT32 | |
872 | tristate "Atmel AVR32 PATA support (Experimental)" | |
48b3de21 | 873 | depends on AVR32 && PLATFORM_AT32AP |
7e45b0e5 | 874 | help |
9a7780c9 TH |
875 | This option enables support for the IDE devices on the |
876 | Atmel AT32AP platform. | |
877 | ||
878 | If unsure, say N. | |
879 | ||
880 | config PATA_AT91 | |
881 | tristate "PATA support for AT91SAM9260" | |
2af89a3c | 882 | depends on ARM && SOC_AT91SAM9 |
9a7780c9 TH |
883 | help |
884 | This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. | |
885 | ||
886 | If unsure, say N. | |
887 | ||
888 | config PATA_CMD640_PCI | |
889 | tristate "CMD640 PCI PATA support (Experimental)" | |
48b3de21 | 890 | depends on PCI |
9a7780c9 TH |
891 | help |
892 | This option enables support for the CMD640 PCI IDE | |
893 | interface chip. Only the primary channel is currently | |
894 | supported. | |
895 | ||
896 | If unsure, say N. | |
897 | ||
898 | config PATA_ISAPNP | |
899 | tristate "ISA Plug and Play PATA support" | |
900 | depends on ISAPNP | |
901 | help | |
902 | This option enables support for ISA plug & play ATA | |
903 | controllers such as those found on old soundcards. | |
904 | ||
905 | If unsure, say N. | |
906 | ||
907 | config PATA_IXP4XX_CF | |
908 | tristate "IXP4XX Compact Flash support" | |
909 | depends on ARCH_IXP4XX | |
910 | help | |
911 | This option enables support for a Compact Flash connected on | |
912 | the ixp4xx expansion bus. This driver had been written for | |
913 | Loft/Avila boards in mind but can work with others. | |
914 | ||
915 | If unsure, say N. | |
916 | ||
917 | config PATA_MPIIX | |
918 | tristate "Intel PATA MPIIX support" | |
919 | depends on PCI | |
920 | help | |
921 | This option enables support for MPIIX PATA support. | |
922 | ||
923 | If unsure, say N. | |
924 | ||
925 | config PATA_NS87410 | |
926 | tristate "Nat Semi NS87410 PATA support" | |
927 | depends on PCI | |
928 | help | |
929 | This option enables support for the National Semiconductor | |
930 | NS87410 PCI-IDE controller. | |
931 | ||
932 | If unsure, say N. | |
933 | ||
934 | config PATA_OPTI | |
935 | tristate "OPTI621/6215 PATA support (Very Experimental)" | |
48b3de21 | 936 | depends on PCI |
9a7780c9 TH |
937 | help |
938 | This option enables full PIO support for the early Opti ATA | |
939 | controllers found on some old motherboards. | |
940 | ||
941 | If unsure, say N. | |
942 | ||
943 | config PATA_PALMLD | |
944 | tristate "Palm LifeDrive PATA support" | |
945 | depends on MACH_PALMLD | |
946 | help | |
947 | This option enables support for Palm LifeDrive's internal ATA | |
948 | port via the new ATA layer. | |
949 | ||
950 | If unsure, say N. | |
951 | ||
952 | config PATA_PCMCIA | |
953 | tristate "PCMCIA PATA support" | |
954 | depends on PCMCIA | |
955 | help | |
956 | This option enables support for PCMCIA ATA interfaces, including | |
957 | compact flash card adapters via the new ATA layer. | |
958 | ||
959 | If unsure, say N. | |
7e45b0e5 | 960 | |
a20c9e82 PM |
961 | config PATA_PLATFORM |
962 | tristate "Generic platform device PATA support" | |
6a108a14 | 963 | depends on EXPERT || PPC || HAVE_PATA_PLATFORM |
a20c9e82 PM |
964 | help |
965 | This option enables support for generic directly connected ATA | |
966 | devices commonly found on embedded systems. | |
967 | ||
968 | If unsure, say N. | |
61f71621 AV |
969 | |
970 | config PATA_OF_PLATFORM | |
971 | tristate "OpenFirmware platform device PATA support" | |
d0643aa1 | 972 | depends on PATA_PLATFORM && OF |
61f71621 AV |
973 | help |
974 | This option enables support for generic directly connected ATA | |
975 | devices commonly found on embedded systems with OpenFirmware | |
976 | bindings. | |
977 | ||
978 | If unsure, say N. | |
a20c9e82 | 979 | |
9a7780c9 TH |
980 | config PATA_QDI |
981 | tristate "QDI VLB PATA support" | |
982 | depends on ISA | |
0dcd0a76 | 983 | select PATA_LEGACY |
73b6a2be | 984 | help |
9a7780c9 | 985 | Support for QDI 6500 and 6580 PATA controllers on VESA local bus. |
73b6a2be | 986 | |
9a7780c9 TH |
987 | config PATA_RB532 |
988 | tristate "RouterBoard 532 PATA CompactFlash support" | |
989 | depends on MIKROTIK_RB532 | |
0df0d0a0 | 990 | help |
9a7780c9 TH |
991 | This option enables support for the RouterBoard 532 |
992 | PATA CompactFlash controller. | |
0df0d0a0 AZ |
993 | |
994 | If unsure, say N. | |
995 | ||
9a7780c9 TH |
996 | config PATA_RZ1000 |
997 | tristate "PC Tech RZ1000 PATA support" | |
998 | depends on PCI | |
3c929c6f | 999 | help |
9a7780c9 TH |
1000 | This option enables basic support for the PC Tech RZ1000/1 |
1001 | PATA controllers via the new ATA layer | |
3c929c6f DD |
1002 | |
1003 | If unsure, say N. | |
1004 | ||
155bf48f AK |
1005 | config PATA_SAMSUNG_CF |
1006 | tristate "Samsung SoC PATA support" | |
1007 | depends on SAMSUNG_DEV_IDE | |
1008 | help | |
1009 | This option enables basic support for Samsung's S3C/S5P board | |
1010 | PATA controllers via the new ATA layer | |
1011 | ||
1012 | If unsure, say N. | |
1013 | ||
9a7780c9 TH |
1014 | config PATA_WINBOND_VLB |
1015 | tristate "Winbond W83759A VLB PATA support (Experimental)" | |
48b3de21 | 1016 | depends on ISA |
6d981b9a | 1017 | select PATA_LEGACY |
a619f981 | 1018 | help |
9a7780c9 TH |
1019 | Support for the Winbond W83759A controller on Vesa Local Bus |
1020 | systems. | |
a619f981 | 1021 | |
9a7780c9 | 1022 | comment "Generic fallback / legacy drivers" |
a619f981 | 1023 | |
9a7780c9 TH |
1024 | config PATA_ACPI |
1025 | tristate "ACPI firmware driver for PATA" | |
1026 | depends on ATA_ACPI && ATA_BMDMA | |
07ab85de | 1027 | help |
9a7780c9 TH |
1028 | This option enables an ACPI method driver which drives |
1029 | motherboard PATA controller interfaces through the ACPI | |
1030 | firmware in the BIOS. This driver can sometimes handle | |
1031 | otherwise unsupported hardware. | |
07ab85de | 1032 | |
9a7780c9 TH |
1033 | config ATA_GENERIC |
1034 | tristate "Generic ATA support" | |
1035 | depends on PCI && ATA_BMDMA | |
d830d173 | 1036 | help |
9a7780c9 TH |
1037 | This option enables support for generic BIOS configured |
1038 | ATA controllers via the new ATA layer | |
d830d173 SZ |
1039 | |
1040 | If unsure, say N. | |
1041 | ||
9a7780c9 TH |
1042 | config PATA_LEGACY |
1043 | tristate "Legacy ISA PATA support (Experimental)" | |
48b3de21 | 1044 | depends on (ISA || PCI) |
88358ab0 | 1045 | help |
9a7780c9 TH |
1046 | This option enables support for ISA/VLB/PCI bus legacy PATA |
1047 | ports and allows them to be accessed via the new ATA layer. | |
88358ab0 | 1048 | |
9a7780c9 | 1049 | If unsure, say N. |
88358ab0 | 1050 | |
127102ae | 1051 | endif # ATA_SFF |
b196fc69 | 1052 | endif # ATA |