[deliverable/linux.git] / drivers / ata / ahci_brcmstb.c

/*
 * Broadcom SATA3 AHCI Controller Driver
 *
 * Copyright © 2009-2015 Broadcom Corporation
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/ahci_platform.h>
#include <linux/compiler.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/libata.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/string.h>

#include "ahci.h"

#define DRV_NAME					"brcm-ahci"

#define SATA_TOP_CTRL_VERSION				0x0
#define SATA_TOP_CTRL_BUS_CTRL				0x4
 #define MMIO_ENDIAN_SHIFT				0 /* CPU->AHCI */
 #define DMADESC_ENDIAN_SHIFT				2 /* AHCI->DDR */
 #define DMADATA_ENDIAN_SHIFT				4 /* AHCI->DDR */
 #define PIODATA_ENDIAN_SHIFT				6
  #define ENDIAN_SWAP_NONE				0
  #define ENDIAN_SWAP_FULL				2
 #define OVERRIDE_HWINIT				BIT(16)
#define SATA_TOP_CTRL_TP_CTRL				0x8
#define SATA_TOP_CTRL_PHY_CTRL				0xc
 #define SATA_TOP_CTRL_PHY_CTRL_1			0x0
  #define SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE	BIT(14)
 #define SATA_TOP_CTRL_PHY_CTRL_2			0x4
  #define SATA_TOP_CTRL_2_SW_RST_MDIOREG		BIT(0)
  #define SATA_TOP_CTRL_2_SW_RST_OOB			BIT(1)
  #define SATA_TOP_CTRL_2_SW_RST_RX			BIT(2)
  #define SATA_TOP_CTRL_2_SW_RST_TX			BIT(3)
  #define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET		BIT(14)
 #define SATA_TOP_CTRL_PHY_OFFS				0x8
 #define SATA_TOP_MAX_PHYS				2

#define SATA_FIRST_PORT_CTRL				0x700
#define SATA_NEXT_PORT_CTRL_OFFSET			0x80
#define SATA_PORT_PCTRL6(reg_base)			(reg_base + 0x18)

/* On big-endian MIPS, buses are reversed to big endian, so switch them back */
#if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
#define DATA_ENDIAN			 2 /* AHCI->DDR inbound accesses */
#define MMIO_ENDIAN			 2 /* CPU->AHCI outbound accesses */
#else
#define DATA_ENDIAN			 0
#define MMIO_ENDIAN			 0
#endif

#define BUS_CTRL_ENDIAN_CONF				\
	((DATA_ENDIAN << DMADATA_ENDIAN_SHIFT) |	\
	(DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) |		\
	(MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))

enum brcm_ahci_quirks {
	BRCM_AHCI_QUIRK_NO_NCQ		= BIT(0),
	BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE	= BIT(1),
};

struct brcm_ahci_priv {
	struct device *dev;
	void __iomem *top_ctrl;
	u32 port_mask;
	u32 quirks;
};

static const struct ata_port_info ahci_brcm_port_info = {
	.flags		= AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
	.pio_mask	= ATA_PIO4,
	.udma_mask	= ATA_UDMA6,
	.port_ops	= &ahci_platform_ops,
};

static inline u32 brcm_sata_readreg(void __iomem *addr)
{
	/*
	 * MIPS endianness is configured by boot strap, which also reverses all
	 * bus endianness (i.e., big-endian CPU + big endian bus ==> native
	 * endian I/O).
	 *
	 * Other architectures (e.g., ARM) either do not support big endian, or
	 * else leave I/O in little endian mode.
	 */
	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
		return __raw_readl(addr);
	else
		return readl_relaxed(addr);
}

static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
{
	/* See brcm_sata_readreg() comments */
	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
		__raw_writel(val, addr);
	else
		writel_relaxed(val, addr);
}

static void brcm_sata_alpm_init(struct ahci_host_priv *hpriv)
{
	struct brcm_ahci_priv *priv = hpriv->plat_data;
	u32 bus_ctrl, port_ctrl, host_caps;
	int i;

	/* Enable support for ALPM */
	bus_ctrl = brcm_sata_readreg(priv->top_ctrl +
				     SATA_TOP_CTRL_BUS_CTRL);
	brcm_sata_writereg(bus_ctrl | OVERRIDE_HWINIT,
			   priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
	host_caps = readl(hpriv->mmio + HOST_CAP);
	writel(host_caps | HOST_CAP_ALPM, hpriv->mmio);
	brcm_sata_writereg(bus_ctrl, priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);

	/*
	 * Adjust timeout to allow PLL sufficient time to lock while waking
	 * up from slumber mode.
	 */
	for (i = 0, port_ctrl = SATA_FIRST_PORT_CTRL;
	     i < SATA_TOP_MAX_PHYS;
	     i++, port_ctrl += SATA_NEXT_PORT_CTRL_OFFSET) {
		if (priv->port_mask & BIT(i))
			writel(0xff1003fc,
			       hpriv->mmio + SATA_PORT_PCTRL6(port_ctrl));
	}
}

static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
{
	void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
				(port * SATA_TOP_CTRL_PHY_OFFS);
	void __iomem *p;
	u32 reg;

	if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
		return;

	/* clear PHY_DEFAULT_POWER_STATE */
	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
	reg = brcm_sata_readreg(p);
	reg &= ~SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
	brcm_sata_writereg(reg, p);

	/* reset the PHY digital logic */
	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
	reg = brcm_sata_readreg(p);
	reg &= ~(SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
		 SATA_TOP_CTRL_2_SW_RST_RX);
	reg |= SATA_TOP_CTRL_2_SW_RST_TX;
	brcm_sata_writereg(reg, p);
	reg = brcm_sata_readreg(p);
	reg |= SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
	brcm_sata_writereg(reg, p);
	reg = brcm_sata_readreg(p);
	reg &= ~SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
	brcm_sata_writereg(reg, p);
	(void)brcm_sata_readreg(p);
}

static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
{
	void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
				(port * SATA_TOP_CTRL_PHY_OFFS);
	void __iomem *p;
	u32 reg;

	if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
		return;

	/* power-off the PHY digital logic */
	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
	reg = brcm_sata_readreg(p);
	reg |= (SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
		SATA_TOP_CTRL_2_SW_RST_RX | SATA_TOP_CTRL_2_SW_RST_TX |
		SATA_TOP_CTRL_2_PHY_GLOBAL_RESET);
	brcm_sata_writereg(reg, p);

	/* set PHY_DEFAULT_POWER_STATE */
	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
	reg = brcm_sata_readreg(p);
	reg |= SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
	brcm_sata_writereg(reg, p);
}

static void brcm_sata_phys_enable(struct brcm_ahci_priv *priv)
{
	int i;

	for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
		if (priv->port_mask & BIT(i))
			brcm_sata_phy_enable(priv, i);
}

static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv)
{
	int i;

	for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
		if (priv->port_mask & BIT(i))
			brcm_sata_phy_disable(priv, i);
}

static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
				  struct brcm_ahci_priv *priv)
{
	void __iomem *ahci;
	struct resource *res;
	u32 impl;

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci");
	ahci = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(ahci))
		return 0;

	impl = readl(ahci + HOST_PORTS_IMPL);

	if (fls(impl) > SATA_TOP_MAX_PHYS)
		dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n",
			 impl);
	else if (!impl)
		dev_info(priv->dev, "no ports found\n");

	devm_iounmap(&pdev->dev, ahci);
	devm_release_mem_region(&pdev->dev, res->start, resource_size(res));

	return impl;
}

static void brcm_sata_init(struct brcm_ahci_priv *priv)
{
	/* Configure endianness */
	brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF,
			   priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
}

#ifdef CONFIG_PM_SLEEP
static int brcm_ahci_suspend(struct device *dev)
{
	struct ata_host *host = dev_get_drvdata(dev);
	struct ahci_host_priv *hpriv = host->private_data;
	struct brcm_ahci_priv *priv = hpriv->plat_data;
	int ret;

	ret = ahci_platform_suspend(dev);
	brcm_sata_phys_disable(priv);
	return ret;
}

static int brcm_ahci_resume(struct device *dev)
{
	struct ata_host *host = dev_get_drvdata(dev);
	struct ahci_host_priv *hpriv = host->private_data;
	struct brcm_ahci_priv *priv = hpriv->plat_data;

	brcm_sata_init(priv);
	brcm_sata_phys_enable(priv);
	brcm_sata_alpm_init(hpriv);
	return ahci_platform_resume(dev);
}
#endif

static struct scsi_host_template ahci_platform_sht = {
	AHCI_SHT(DRV_NAME),
};

static int brcm_ahci_probe(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	struct brcm_ahci_priv *priv;
	struct ahci_host_priv *hpriv;
	struct resource *res;
	int ret;

	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
		return -ENOMEM;
	priv->dev = dev;

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl");
	priv->top_ctrl = devm_ioremap_resource(dev, res);
	if (IS_ERR(priv->top_ctrl))
		return PTR_ERR(priv->top_ctrl);

	if (of_device_is_compatible(dev->of_node, "brcm,bcm7425-ahci")) {
		priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ;
		priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
	}

	brcm_sata_init(priv);

	priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
	if (!priv->port_mask)
		return -ENODEV;

	brcm_sata_phys_enable(priv);

	hpriv = ahci_platform_get_resources(pdev);
	if (IS_ERR(hpriv))
		return PTR_ERR(hpriv);
	hpriv->plat_data = priv;

	brcm_sata_alpm_init(hpriv);

	ret = ahci_platform_enable_resources(hpriv);
	if (ret)
		return ret;

	if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ)
		hpriv->flags |= AHCI_HFLAG_NO_NCQ;

	ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
				      &ahci_platform_sht);
	if (ret)
		return ret;

	dev_info(dev, "Broadcom AHCI SATA3 registered\n");

	return 0;
}

static int brcm_ahci_remove(struct platform_device *pdev)
{
	struct ata_host *host = dev_get_drvdata(&pdev->dev);
	struct ahci_host_priv *hpriv = host->private_data;
	struct brcm_ahci_priv *priv = hpriv->plat_data;
	int ret;

	ret = ata_platform_remove_one(pdev);
	if (ret)
		return ret;

	brcm_sata_phys_disable(priv);

	return 0;
}

static const struct of_device_id ahci_of_match[] = {
	{.compatible = "brcm,bcm7425-ahci"},
	{.compatible = "brcm,bcm7445-ahci"},
	{},
};
MODULE_DEVICE_TABLE(of, ahci_of_match);

static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);

static struct platform_driver brcm_ahci_driver = {
	.probe = brcm_ahci_probe,
	.remove = brcm_ahci_remove,
	.driver = {
		.name = DRV_NAME,
		.of_match_table = ahci_of_match,
		.pm = &ahci_brcm_pm_ops,
	},
};
module_platform_driver(brcm_ahci_driver);

MODULE_DESCRIPTION("Broadcom SATA3 AHCI Controller Driver");
MODULE_AUTHOR("Brian Norris");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:sata-brcmstb");
Commit	Line	Data
766a2d97 BN	1	/*
	2	* Broadcom SATA3 AHCI Controller Driver
	3	*
	4	* Copyright © 2009-2015 Broadcom Corporation
	5	*
	6	* This program is free software; you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License as published by
	8	* the Free Software Foundation; either version 2, or (at your option)
	9	* any later version.
	10	*
	11	* This program is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	* GNU General Public License for more details.
	15	*/
	16
	17	#include <linux/ahci_platform.h>
	18	#include <linux/compiler.h>
	19	#include <linux/device.h>
	20	#include <linux/init.h>
	21	#include <linux/interrupt.h>
	22	#include <linux/io.h>
	23	#include <linux/kernel.h>
	24	#include <linux/libata.h>
	25	#include <linux/module.h>
	26	#include <linux/of.h>
	27	#include <linux/platform_device.h>
	28	#include <linux/string.h>
	29
	30	#include "ahci.h"
	31
	32	#define DRV_NAME "brcm-ahci"
	33
	34	#define SATA_TOP_CTRL_VERSION 0x0
	35	#define SATA_TOP_CTRL_BUS_CTRL 0x4
	36	#define MMIO_ENDIAN_SHIFT 0 /* CPU->AHCI */
	37	#define DMADESC_ENDIAN_SHIFT 2 /* AHCI->DDR */
	38	#define DMADATA_ENDIAN_SHIFT 4 /* AHCI->DDR */
	39	#define PIODATA_ENDIAN_SHIFT 6
	40	#define ENDIAN_SWAP_NONE 0
	41	#define ENDIAN_SWAP_FULL 2
	42	#define OVERRIDE_HWINIT BIT(16)
	43	#define SATA_TOP_CTRL_TP_CTRL 0x8
	44	#define SATA_TOP_CTRL_PHY_CTRL 0xc
	45	#define SATA_TOP_CTRL_PHY_CTRL_1 0x0
	46	#define SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE BIT(14)
	47	#define SATA_TOP_CTRL_PHY_CTRL_2 0x4
	48	#define SATA_TOP_CTRL_2_SW_RST_MDIOREG BIT(0)
	49	#define SATA_TOP_CTRL_2_SW_RST_OOB BIT(1)
	50	#define SATA_TOP_CTRL_2_SW_RST_RX BIT(2)
	51	#define SATA_TOP_CTRL_2_SW_RST_TX BIT(3)
	52	#define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET BIT(14)
	53	#define SATA_TOP_CTRL_PHY_OFFS 0x8
	54	#define SATA_TOP_MAX_PHYS 2
766a2d97	55
6863caaf DP	56	#define SATA_FIRST_PORT_CTRL 0x700
	57	#define SATA_NEXT_PORT_CTRL_OFFSET 0x80
	58	#define SATA_PORT_PCTRL6(reg_base) (reg_base + 0x18)
	59
766a2d97 BN	60	/* On big-endian MIPS, buses are reversed to big endian, so switch them back */
	61	#if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
	62	#define DATA_ENDIAN 2 /* AHCI->DDR inbound accesses */
	63	#define MMIO_ENDIAN 2 /* CPU->AHCI outbound accesses */
	64	#else
	65	#define DATA_ENDIAN 0
	66	#define MMIO_ENDIAN 0
	67	#endif
	68
	69	#define BUS_CTRL_ENDIAN_CONF \
	70	((DATA_ENDIAN << DMADATA_ENDIAN_SHIFT) \| \
	71	(DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) \| \
	72	(MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
	73
7de32445 JS	74	enum brcm_ahci_quirks {
7de32445 JS	75	BRCM_AHCI_QUIRK_NO_NCQ = BIT(0),
b46f79bc	76	BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE = BIT(1),
7de32445 JS	77	};
7de32445 JS	78
766a2d97 BN	79	struct brcm_ahci_priv {
	80	struct device *dev;
	81	void __iomem *top_ctrl;
	82	u32 port_mask;
7de32445	83	u32 quirks;
766a2d97 BN	84	};
	85
	86	static const struct ata_port_info ahci_brcm_port_info = {
6ca92dd7	87	.flags = AHCI_FLAG_COMMON \| ATA_FLAG_NO_DIPM,
766a2d97 BN	88	.pio_mask = ATA_PIO4,
	89	.udma_mask = ATA_UDMA6,
	90	.port_ops = &ahci_platform_ops,
	91	};
	92
	93	static inline u32 brcm_sata_readreg(void __iomem *addr)
	94	{
	95	/*
	96	* MIPS endianness is configured by boot strap, which also reverses all
	97	* bus endianness (i.e., big-endian CPU + big endian bus ==> native
	98	* endian I/O).
	99	*
	100	* Other architectures (e.g., ARM) either do not support big endian, or
	101	* else leave I/O in little endian mode.
	102	*/
f9114d35	103	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
766a2d97 BN	104	return __raw_readl(addr);
	105	else
	106	return readl_relaxed(addr);
	107	}
	108
	109	static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
	110	{
	111	/* See brcm_sata_readreg() comments */
f9114d35	112	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
766a2d97 BN	113	__raw_writel(val, addr);
	114	else
	115	writel_relaxed(val, addr);
	116	}
	117
6863caaf DP	118	static void brcm_sata_alpm_init(struct ahci_host_priv *hpriv)
	119	{
	120	struct brcm_ahci_priv *priv = hpriv->plat_data;
	121	u32 bus_ctrl, port_ctrl, host_caps;
	122	int i;
	123
	124	/* Enable support for ALPM */
	125	bus_ctrl = brcm_sata_readreg(priv->top_ctrl +
	126	SATA_TOP_CTRL_BUS_CTRL);
	127	brcm_sata_writereg(bus_ctrl \| OVERRIDE_HWINIT,
	128	priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
	129	host_caps = readl(hpriv->mmio + HOST_CAP);
	130	writel(host_caps \| HOST_CAP_ALPM, hpriv->mmio);
	131	brcm_sata_writereg(bus_ctrl, priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
	132
	133	/*
	134	* Adjust timeout to allow PLL sufficient time to lock while waking
	135	* up from slumber mode.
	136	*/
	137	for (i = 0, port_ctrl = SATA_FIRST_PORT_CTRL;
	138	i < SATA_TOP_MAX_PHYS;
	139	i++, port_ctrl += SATA_NEXT_PORT_CTRL_OFFSET) {
	140	if (priv->port_mask & BIT(i))
	141	writel(0xff1003fc,
	142	hpriv->mmio + SATA_PORT_PCTRL6(port_ctrl));
	143	}
	144	}
	145
766a2d97 BN	146	static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
	147	{
	148	void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
	149	(port * SATA_TOP_CTRL_PHY_OFFS);
	150	void __iomem *p;
	151	u32 reg;
	152
b46f79bc JS	153	if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
	154	return;
	155
766a2d97 BN	156	/* clear PHY_DEFAULT_POWER_STATE */
	157	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
	158	reg = brcm_sata_readreg(p);
	159	reg &= ~SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
	160	brcm_sata_writereg(reg, p);
	161
	162	/* reset the PHY digital logic */
	163	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
	164	reg = brcm_sata_readreg(p);
	165	reg &= ~(SATA_TOP_CTRL_2_SW_RST_MDIOREG \| SATA_TOP_CTRL_2_SW_RST_OOB \|
	166	SATA_TOP_CTRL_2_SW_RST_RX);
	167	reg \|= SATA_TOP_CTRL_2_SW_RST_TX;
	168	brcm_sata_writereg(reg, p);
	169	reg = brcm_sata_readreg(p);
	170	reg \|= SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
	171	brcm_sata_writereg(reg, p);
	172	reg = brcm_sata_readreg(p);
	173	reg &= ~SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
	174	brcm_sata_writereg(reg, p);
	175	(void)brcm_sata_readreg(p);
	176	}
	177
	178	static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
	179	{
	180	void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
	181	(port * SATA_TOP_CTRL_PHY_OFFS);
	182	void __iomem *p;
	183	u32 reg;
	184
b46f79bc JS	185	if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
	186	return;
	187
766a2d97 BN	188	/* power-off the PHY digital logic */
	189	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
	190	reg = brcm_sata_readreg(p);
	191	reg \|= (SATA_TOP_CTRL_2_SW_RST_MDIOREG \| SATA_TOP_CTRL_2_SW_RST_OOB \|
	192	SATA_TOP_CTRL_2_SW_RST_RX \| SATA_TOP_CTRL_2_SW_RST_TX \|
	193	SATA_TOP_CTRL_2_PHY_GLOBAL_RESET);
	194	brcm_sata_writereg(reg, p);
	195
	196	/* set PHY_DEFAULT_POWER_STATE */
	197	p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
	198	reg = brcm_sata_readreg(p);
	199	reg \|= SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
	200	brcm_sata_writereg(reg, p);
	201	}
	202
	203	static void brcm_sata_phys_enable(struct brcm_ahci_priv *priv)
	204	{
	205	int i;
	206
	207	for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
	208	if (priv->port_mask & BIT(i))
	209	brcm_sata_phy_enable(priv, i);
	210	}
	211
	212	static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv)
	213	{
	214	int i;
	215
	216	for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
	217	if (priv->port_mask & BIT(i))
	218	brcm_sata_phy_disable(priv, i);
	219	}
	220
	221	static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
	222	struct brcm_ahci_priv *priv)
	223	{
	224	void __iomem *ahci;
	225	struct resource *res;
	226	u32 impl;
	227
	228	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci");
	229	ahci = devm_ioremap_resource(&pdev->dev, res);
	230	if (IS_ERR(ahci))
	231	return 0;
	232
	233	impl = readl(ahci + HOST_PORTS_IMPL);
	234
	235	if (fls(impl) > SATA_TOP_MAX_PHYS)
	236	dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n",
	237	impl);
	238	else if (!impl)
	239	dev_info(priv->dev, "no ports found\n");
	240
	241	devm_iounmap(&pdev->dev, ahci);
	242	devm_release_mem_region(&pdev->dev, res->start, resource_size(res));
	243
	244	return impl;
	245	}
	246
	247	static void brcm_sata_init(struct brcm_ahci_priv *priv)
	248	{
	249	/* Configure endianness */
	250	brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF,
	251	priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
252	}
253
8b34fe59	254	#ifdef CONFIG_PM_SLEEP
766a2d97 BN	255	static int brcm_ahci_suspend(struct device *dev)
	256	{
	257	struct ata_host *host = dev_get_drvdata(dev);
	258	struct ahci_host_priv *hpriv = host->private_data;
	259	struct brcm_ahci_priv *priv = hpriv->plat_data;
	260	int ret;
	261
	262	ret = ahci_platform_suspend(dev);
	263	brcm_sata_phys_disable(priv);
	264	return ret;
	265	}
	266
	267	static int brcm_ahci_resume(struct device *dev)
	268	{
	269	struct ata_host *host = dev_get_drvdata(dev);
	270	struct ahci_host_priv *hpriv = host->private_data;
	271	struct brcm_ahci_priv *priv = hpriv->plat_data;
	272
	273	brcm_sata_init(priv);
	274	brcm_sata_phys_enable(priv);
6863caaf	275	brcm_sata_alpm_init(hpriv);
766a2d97 BN	276	return ahci_platform_resume(dev);
766a2d97 BN	277	}
8b34fe59	278	#endif
766a2d97 BN	279
	280	static struct scsi_host_template ahci_platform_sht = {
	281	AHCI_SHT(DRV_NAME),
	282	};
	283
	284	static int brcm_ahci_probe(struct platform_device *pdev)
	285	{
	286	struct device *dev = &pdev->dev;
	287	struct brcm_ahci_priv *priv;
	288	struct ahci_host_priv *hpriv;
	289	struct resource *res;
	290	int ret;
	291
	292	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
	293	if (!priv)
	294	return -ENOMEM;
	295	priv->dev = dev;
	296
	297	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl");
	298	priv->top_ctrl = devm_ioremap_resource(dev, res);
	299	if (IS_ERR(priv->top_ctrl))
	300	return PTR_ERR(priv->top_ctrl);
	301
b46f79bc	302	if (of_device_is_compatible(dev->of_node, "brcm,bcm7425-ahci")) {
7de32445	303	priv->quirks \|= BRCM_AHCI_QUIRK_NO_NCQ;
b46f79bc JS	304	priv->quirks \|= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
b46f79bc JS	305	}
7de32445	306
766a2d97 BN	307	brcm_sata_init(priv);
	308
	309	priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
	310	if (!priv->port_mask)
	311	return -ENODEV;
	312
	313	brcm_sata_phys_enable(priv);
	314
	315	hpriv = ahci_platform_get_resources(pdev);
	316	if (IS_ERR(hpriv))
	317	return PTR_ERR(hpriv);
	318	hpriv->plat_data = priv;
	319
6863caaf DP	320	brcm_sata_alpm_init(hpriv);
6863caaf DP	321
766a2d97 BN	322	ret = ahci_platform_enable_resources(hpriv);
	323	if (ret)
	324	return ret;
	325
7de32445 JS	326	if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ)
	327	hpriv->flags \|= AHCI_HFLAG_NO_NCQ;
	328
766a2d97 BN	329	ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
	330	&ahci_platform_sht);
	331	if (ret)
	332	return ret;
	333
	334	dev_info(dev, "Broadcom AHCI SATA3 registered\n");
	335
	336	return 0;
	337	}
	338
	339	static int brcm_ahci_remove(struct platform_device *pdev)
	340	{
	341	struct ata_host *host = dev_get_drvdata(&pdev->dev);
	342	struct ahci_host_priv *hpriv = host->private_data;
	343	struct brcm_ahci_priv *priv = hpriv->plat_data;
	344	int ret;
	345
	346	ret = ata_platform_remove_one(pdev);
	347	if (ret)
	348	return ret;
	349
	350	brcm_sata_phys_disable(priv);
	351
	352	return 0;
	353	}
	354
	355	static const struct of_device_id ahci_of_match[] = {
1980eb9b	356	{.compatible = "brcm,bcm7425-ahci"},
766a2d97 BN	357	{.compatible = "brcm,bcm7445-ahci"},
	358	{},
	359	};
	360	MODULE_DEVICE_TABLE(of, ahci_of_match);
	361
	362	static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
	363
	364	static struct platform_driver brcm_ahci_driver = {
	365	.probe = brcm_ahci_probe,
	366	.remove = brcm_ahci_remove,
	367	.driver = {
	368	.name = DRV_NAME,
	369	.of_match_table = ahci_of_match,
	370	.pm = &ahci_brcm_pm_ops,
	371	},
	372	};
	373	module_platform_driver(brcm_ahci_driver);
	374
	375	MODULE_DESCRIPTION("Broadcom SATA3 AHCI Controller Driver");
	376	MODULE_AUTHOR("Brian Norris");
	377	MODULE_LICENSE("GPL");
	378	MODULE_ALIAS("platform:sata-brcmstb");