Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
af36d7f0 JG |
2 | * libata-core.c - helper library for ATA |
3 | * | |
8c3d3d4b | 4 | * Maintained by: Tejun Heo <tj@kernel.org> |
af36d7f0 JG |
5 | * Please ALWAYS copy linux-ide@vger.kernel.org |
6 | * on emails. | |
7 | * | |
8 | * Copyright 2003-2004 Red Hat, Inc. All rights reserved. | |
9 | * Copyright 2003-2004 Jeff Garzik | |
10 | * | |
11 | * | |
12 | * This program is free software; you can redistribute it and/or modify | |
13 | * it under the terms of the GNU General Public License as published by | |
14 | * the Free Software Foundation; either version 2, or (at your option) | |
15 | * any later version. | |
16 | * | |
17 | * This program is distributed in the hope that it will be useful, | |
18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
20 | * GNU General Public License for more details. | |
21 | * | |
22 | * You should have received a copy of the GNU General Public License | |
23 | * along with this program; see the file COPYING. If not, write to | |
24 | * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | |
25 | * | |
26 | * | |
27 | * libata documentation is available via 'make {ps|pdf}docs', | |
28 | * as Documentation/DocBook/libata.* | |
29 | * | |
30 | * Hardware documentation available from http://www.t13.org/ and | |
31 | * http://www.sata-io.org/ | |
32 | * | |
92c52c52 AC |
33 | * Standards documents from: |
34 | * http://www.t13.org (ATA standards, PCI DMA IDE spec) | |
35 | * http://www.t10.org (SCSI MMC - for ATAPI MMC) | |
36 | * http://www.sata-io.org (SATA) | |
37 | * http://www.compactflash.org (CF) | |
38 | * http://www.qic.org (QIC157 - Tape and DSC) | |
39 | * http://www.ce-ata.org (CE-ATA: not supported) | |
40 | * | |
1da177e4 LT |
41 | */ |
42 | ||
1da177e4 LT |
43 | #include <linux/kernel.h> |
44 | #include <linux/module.h> | |
45 | #include <linux/pci.h> | |
46 | #include <linux/init.h> | |
47 | #include <linux/list.h> | |
48 | #include <linux/mm.h> | |
1da177e4 LT |
49 | #include <linux/spinlock.h> |
50 | #include <linux/blkdev.h> | |
51 | #include <linux/delay.h> | |
52 | #include <linux/timer.h> | |
848c3920 | 53 | #include <linux/time.h> |
1da177e4 LT |
54 | #include <linux/interrupt.h> |
55 | #include <linux/completion.h> | |
56 | #include <linux/suspend.h> | |
57 | #include <linux/workqueue.h> | |
378f058c | 58 | #include <linux/scatterlist.h> |
2dcb407e | 59 | #include <linux/io.h> |
79318057 | 60 | #include <linux/async.h> |
e18086d6 | 61 | #include <linux/log2.h> |
5a0e3ad6 | 62 | #include <linux/slab.h> |
428ac5fc | 63 | #include <linux/glob.h> |
1da177e4 | 64 | #include <scsi/scsi.h> |
193515d5 | 65 | #include <scsi/scsi_cmnd.h> |
1da177e4 LT |
66 | #include <scsi/scsi_host.h> |
67 | #include <linux/libata.h> | |
1da177e4 | 68 | #include <asm/byteorder.h> |
fe5af0cc | 69 | #include <asm/unaligned.h> |
140b5e59 | 70 | #include <linux/cdrom.h> |
9990b6f3 | 71 | #include <linux/ratelimit.h> |
eb25cb99 | 72 | #include <linux/leds.h> |
9ee4f393 | 73 | #include <linux/pm_runtime.h> |
b7db04d9 | 74 | #include <linux/platform_device.h> |
1da177e4 | 75 | |
255c03d1 HR |
76 | #define CREATE_TRACE_POINTS |
77 | #include <trace/events/libata.h> | |
78 | ||
1da177e4 | 79 | #include "libata.h" |
d9027470 | 80 | #include "libata-transport.h" |
fda0efc5 | 81 | |
d7bb4cc7 | 82 | /* debounce timing parameters in msecs { interval, duration, timeout } */ |
e9c83914 TH |
83 | const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 }; |
84 | const unsigned long sata_deb_timing_hotplug[] = { 25, 500, 2000 }; | |
85 | const unsigned long sata_deb_timing_long[] = { 100, 2000, 5000 }; | |
d7bb4cc7 | 86 | |
029cfd6b | 87 | const struct ata_port_operations ata_base_port_ops = { |
0aa1113d | 88 | .prereset = ata_std_prereset, |
203c75b8 | 89 | .postreset = ata_std_postreset, |
a1efdaba | 90 | .error_handler = ata_std_error_handler, |
e4a9c373 DW |
91 | .sched_eh = ata_std_sched_eh, |
92 | .end_eh = ata_std_end_eh, | |
029cfd6b TH |
93 | }; |
94 | ||
95 | const struct ata_port_operations sata_port_ops = { | |
96 | .inherits = &ata_base_port_ops, | |
97 | ||
98 | .qc_defer = ata_std_qc_defer, | |
57c9efdf | 99 | .hardreset = sata_std_hardreset, |
029cfd6b TH |
100 | }; |
101 | ||
3373efd8 TH |
102 | static unsigned int ata_dev_init_params(struct ata_device *dev, |
103 | u16 heads, u16 sectors); | |
104 | static unsigned int ata_dev_set_xfermode(struct ata_device *dev); | |
105 | static void ata_dev_xfermask(struct ata_device *dev); | |
75683fe7 | 106 | static unsigned long ata_dev_blacklisted(const struct ata_device *dev); |
1da177e4 | 107 | |
a78f57af | 108 | atomic_t ata_print_id = ATOMIC_INIT(0); |
1da177e4 | 109 | |
33267325 TH |
110 | struct ata_force_param { |
111 | const char *name; | |
112 | unsigned int cbl; | |
113 | int spd_limit; | |
114 | unsigned long xfer_mask; | |
115 | unsigned int horkage_on; | |
116 | unsigned int horkage_off; | |
05944bdf | 117 | unsigned int lflags; |
33267325 TH |
118 | }; |
119 | ||
120 | struct ata_force_ent { | |
121 | int port; | |
122 | int device; | |
123 | struct ata_force_param param; | |
124 | }; | |
125 | ||
126 | static struct ata_force_ent *ata_force_tbl; | |
127 | static int ata_force_tbl_size; | |
128 | ||
129 | static char ata_force_param_buf[PAGE_SIZE] __initdata; | |
7afb4222 TH |
130 | /* param_buf is thrown away after initialization, disallow read */ |
131 | module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0); | |
33267325 TH |
132 | MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/kernel-parameters.txt for details)"); |
133 | ||
2486fa56 | 134 | static int atapi_enabled = 1; |
1623c81e | 135 | module_param(atapi_enabled, int, 0444); |
ad5d8eac | 136 | MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on [default])"); |
1623c81e | 137 | |
c5c61bda | 138 | static int atapi_dmadir = 0; |
95de719a | 139 | module_param(atapi_dmadir, int, 0444); |
ad5d8eac | 140 | MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off [default], 1=on)"); |
95de719a | 141 | |
baf4fdfa ML |
142 | int atapi_passthru16 = 1; |
143 | module_param(atapi_passthru16, int, 0444); | |
ad5d8eac | 144 | MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices (0=off, 1=on [default])"); |
baf4fdfa | 145 | |
c3c013a2 JG |
146 | int libata_fua = 0; |
147 | module_param_named(fua, libata_fua, int, 0444); | |
ad5d8eac | 148 | MODULE_PARM_DESC(fua, "FUA support (0=off [default], 1=on)"); |
c3c013a2 | 149 | |
2dcb407e | 150 | static int ata_ignore_hpa; |
1e999736 AC |
151 | module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644); |
152 | MODULE_PARM_DESC(ignore_hpa, "Ignore HPA limit (0=keep BIOS limits, 1=ignore limits, using full disk)"); | |
153 | ||
b3a70601 AC |
154 | static int libata_dma_mask = ATA_DMA_MASK_ATA|ATA_DMA_MASK_ATAPI|ATA_DMA_MASK_CFA; |
155 | module_param_named(dma, libata_dma_mask, int, 0444); | |
156 | MODULE_PARM_DESC(dma, "DMA enable/disable (0x1==ATA, 0x2==ATAPI, 0x4==CF)"); | |
157 | ||
87fbc5a0 | 158 | static int ata_probe_timeout; |
a8601e5f AM |
159 | module_param(ata_probe_timeout, int, 0444); |
160 | MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)"); | |
161 | ||
6ebe9d86 | 162 | int libata_noacpi = 0; |
d7d0dad6 | 163 | module_param_named(noacpi, libata_noacpi, int, 0444); |
ad5d8eac | 164 | MODULE_PARM_DESC(noacpi, "Disable the use of ACPI in probe/suspend/resume (0=off [default], 1=on)"); |
11ef697b | 165 | |
ae8d4ee7 AC |
166 | int libata_allow_tpm = 0; |
167 | module_param_named(allow_tpm, libata_allow_tpm, int, 0444); | |
ad5d8eac | 168 | MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands (0=off [default], 1=on)"); |
ae8d4ee7 | 169 | |
e7ecd435 TH |
170 | static int atapi_an; |
171 | module_param(atapi_an, int, 0444); | |
172 | MODULE_PARM_DESC(atapi_an, "Enable ATAPI AN media presence notification (0=0ff [default], 1=on)"); | |
173 | ||
1da177e4 LT |
174 | MODULE_AUTHOR("Jeff Garzik"); |
175 | MODULE_DESCRIPTION("Library module for ATA devices"); | |
176 | MODULE_LICENSE("GPL"); | |
177 | MODULE_VERSION(DRV_VERSION); | |
178 | ||
0baab86b | 179 | |
9913ff8a TH |
180 | static bool ata_sstatus_online(u32 sstatus) |
181 | { | |
182 | return (sstatus & 0xf) == 0x3; | |
183 | } | |
184 | ||
1eca4365 TH |
185 | /** |
186 | * ata_link_next - link iteration helper | |
187 | * @link: the previous link, NULL to start | |
188 | * @ap: ATA port containing links to iterate | |
189 | * @mode: iteration mode, one of ATA_LITER_* | |
190 | * | |
191 | * LOCKING: | |
192 | * Host lock or EH context. | |
aadffb68 | 193 | * |
1eca4365 TH |
194 | * RETURNS: |
195 | * Pointer to the next link. | |
aadffb68 | 196 | */ |
1eca4365 TH |
197 | struct ata_link *ata_link_next(struct ata_link *link, struct ata_port *ap, |
198 | enum ata_link_iter_mode mode) | |
aadffb68 | 199 | { |
1eca4365 TH |
200 | BUG_ON(mode != ATA_LITER_EDGE && |
201 | mode != ATA_LITER_PMP_FIRST && mode != ATA_LITER_HOST_FIRST); | |
202 | ||
aadffb68 | 203 | /* NULL link indicates start of iteration */ |
1eca4365 TH |
204 | if (!link) |
205 | switch (mode) { | |
206 | case ATA_LITER_EDGE: | |
207 | case ATA_LITER_PMP_FIRST: | |
208 | if (sata_pmp_attached(ap)) | |
209 | return ap->pmp_link; | |
210 | /* fall through */ | |
211 | case ATA_LITER_HOST_FIRST: | |
212 | return &ap->link; | |
213 | } | |
aadffb68 | 214 | |
1eca4365 TH |
215 | /* we just iterated over the host link, what's next? */ |
216 | if (link == &ap->link) | |
217 | switch (mode) { | |
218 | case ATA_LITER_HOST_FIRST: | |
219 | if (sata_pmp_attached(ap)) | |
220 | return ap->pmp_link; | |
221 | /* fall through */ | |
222 | case ATA_LITER_PMP_FIRST: | |
223 | if (unlikely(ap->slave_link)) | |
b1c72916 | 224 | return ap->slave_link; |
1eca4365 TH |
225 | /* fall through */ |
226 | case ATA_LITER_EDGE: | |
aadffb68 | 227 | return NULL; |
b1c72916 | 228 | } |
aadffb68 | 229 | |
b1c72916 TH |
230 | /* slave_link excludes PMP */ |
231 | if (unlikely(link == ap->slave_link)) | |
232 | return NULL; | |
233 | ||
1eca4365 | 234 | /* we were over a PMP link */ |
aadffb68 TH |
235 | if (++link < ap->pmp_link + ap->nr_pmp_links) |
236 | return link; | |
1eca4365 TH |
237 | |
238 | if (mode == ATA_LITER_PMP_FIRST) | |
239 | return &ap->link; | |
240 | ||
aadffb68 TH |
241 | return NULL; |
242 | } | |
243 | ||
1eca4365 TH |
244 | /** |
245 | * ata_dev_next - device iteration helper | |
246 | * @dev: the previous device, NULL to start | |
247 | * @link: ATA link containing devices to iterate | |
248 | * @mode: iteration mode, one of ATA_DITER_* | |
249 | * | |
250 | * LOCKING: | |
251 | * Host lock or EH context. | |
252 | * | |
253 | * RETURNS: | |
254 | * Pointer to the next device. | |
255 | */ | |
256 | struct ata_device *ata_dev_next(struct ata_device *dev, struct ata_link *link, | |
257 | enum ata_dev_iter_mode mode) | |
258 | { | |
259 | BUG_ON(mode != ATA_DITER_ENABLED && mode != ATA_DITER_ENABLED_REVERSE && | |
260 | mode != ATA_DITER_ALL && mode != ATA_DITER_ALL_REVERSE); | |
261 | ||
262 | /* NULL dev indicates start of iteration */ | |
263 | if (!dev) | |
264 | switch (mode) { | |
265 | case ATA_DITER_ENABLED: | |
266 | case ATA_DITER_ALL: | |
267 | dev = link->device; | |
268 | goto check; | |
269 | case ATA_DITER_ENABLED_REVERSE: | |
270 | case ATA_DITER_ALL_REVERSE: | |
271 | dev = link->device + ata_link_max_devices(link) - 1; | |
272 | goto check; | |
273 | } | |
274 | ||
275 | next: | |
276 | /* move to the next one */ | |
277 | switch (mode) { | |
278 | case ATA_DITER_ENABLED: | |
279 | case ATA_DITER_ALL: | |
280 | if (++dev < link->device + ata_link_max_devices(link)) | |
281 | goto check; | |
282 | return NULL; | |
283 | case ATA_DITER_ENABLED_REVERSE: | |
284 | case ATA_DITER_ALL_REVERSE: | |
285 | if (--dev >= link->device) | |
286 | goto check; | |
287 | return NULL; | |
288 | } | |
289 | ||
290 | check: | |
291 | if ((mode == ATA_DITER_ENABLED || mode == ATA_DITER_ENABLED_REVERSE) && | |
292 | !ata_dev_enabled(dev)) | |
293 | goto next; | |
294 | return dev; | |
295 | } | |
296 | ||
b1c72916 TH |
297 | /** |
298 | * ata_dev_phys_link - find physical link for a device | |
299 | * @dev: ATA device to look up physical link for | |
300 | * | |
301 | * Look up physical link which @dev is attached to. Note that | |
302 | * this is different from @dev->link only when @dev is on slave | |
303 | * link. For all other cases, it's the same as @dev->link. | |
304 | * | |
305 | * LOCKING: | |
306 | * Don't care. | |
307 | * | |
308 | * RETURNS: | |
309 | * Pointer to the found physical link. | |
310 | */ | |
311 | struct ata_link *ata_dev_phys_link(struct ata_device *dev) | |
312 | { | |
313 | struct ata_port *ap = dev->link->ap; | |
314 | ||
315 | if (!ap->slave_link) | |
316 | return dev->link; | |
317 | if (!dev->devno) | |
318 | return &ap->link; | |
319 | return ap->slave_link; | |
320 | } | |
321 | ||
33267325 TH |
322 | /** |
323 | * ata_force_cbl - force cable type according to libata.force | |
4cdfa1b3 | 324 | * @ap: ATA port of interest |
33267325 TH |
325 | * |
326 | * Force cable type according to libata.force and whine about it. | |
327 | * The last entry which has matching port number is used, so it | |
328 | * can be specified as part of device force parameters. For | |
329 | * example, both "a:40c,1.00:udma4" and "1.00:40c,udma4" have the | |
330 | * same effect. | |
331 | * | |
332 | * LOCKING: | |
333 | * EH context. | |
334 | */ | |
335 | void ata_force_cbl(struct ata_port *ap) | |
336 | { | |
337 | int i; | |
338 | ||
339 | for (i = ata_force_tbl_size - 1; i >= 0; i--) { | |
340 | const struct ata_force_ent *fe = &ata_force_tbl[i]; | |
341 | ||
342 | if (fe->port != -1 && fe->port != ap->print_id) | |
343 | continue; | |
344 | ||
345 | if (fe->param.cbl == ATA_CBL_NONE) | |
346 | continue; | |
347 | ||
348 | ap->cbl = fe->param.cbl; | |
a9a79dfe | 349 | ata_port_notice(ap, "FORCE: cable set to %s\n", fe->param.name); |
33267325 TH |
350 | return; |
351 | } | |
352 | } | |
353 | ||
354 | /** | |
05944bdf | 355 | * ata_force_link_limits - force link limits according to libata.force |
33267325 TH |
356 | * @link: ATA link of interest |
357 | * | |
05944bdf TH |
358 | * Force link flags and SATA spd limit according to libata.force |
359 | * and whine about it. When only the port part is specified | |
360 | * (e.g. 1:), the limit applies to all links connected to both | |
361 | * the host link and all fan-out ports connected via PMP. If the | |
362 | * device part is specified as 0 (e.g. 1.00:), it specifies the | |
363 | * first fan-out link not the host link. Device number 15 always | |
b1c72916 TH |
364 | * points to the host link whether PMP is attached or not. If the |
365 | * controller has slave link, device number 16 points to it. | |
33267325 TH |
366 | * |
367 | * LOCKING: | |
368 | * EH context. | |
369 | */ | |
05944bdf | 370 | static void ata_force_link_limits(struct ata_link *link) |
33267325 | 371 | { |
05944bdf | 372 | bool did_spd = false; |
b1c72916 TH |
373 | int linkno = link->pmp; |
374 | int i; | |
33267325 TH |
375 | |
376 | if (ata_is_host_link(link)) | |
b1c72916 | 377 | linkno += 15; |
33267325 TH |
378 | |
379 | for (i = ata_force_tbl_size - 1; i >= 0; i--) { | |
380 | const struct ata_force_ent *fe = &ata_force_tbl[i]; | |
381 | ||
382 | if (fe->port != -1 && fe->port != link->ap->print_id) | |
383 | continue; | |
384 | ||
385 | if (fe->device != -1 && fe->device != linkno) | |
386 | continue; | |
387 | ||
05944bdf TH |
388 | /* only honor the first spd limit */ |
389 | if (!did_spd && fe->param.spd_limit) { | |
390 | link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1; | |
a9a79dfe | 391 | ata_link_notice(link, "FORCE: PHY spd limit set to %s\n", |
05944bdf TH |
392 | fe->param.name); |
393 | did_spd = true; | |
394 | } | |
33267325 | 395 | |
05944bdf TH |
396 | /* let lflags stack */ |
397 | if (fe->param.lflags) { | |
398 | link->flags |= fe->param.lflags; | |
a9a79dfe | 399 | ata_link_notice(link, |
05944bdf TH |
400 | "FORCE: link flag 0x%x forced -> 0x%x\n", |
401 | fe->param.lflags, link->flags); | |
402 | } | |
33267325 TH |
403 | } |
404 | } | |
405 | ||
406 | /** | |
407 | * ata_force_xfermask - force xfermask according to libata.force | |
408 | * @dev: ATA device of interest | |
409 | * | |
410 | * Force xfer_mask according to libata.force and whine about it. | |
411 | * For consistency with link selection, device number 15 selects | |
412 | * the first device connected to the host link. | |
413 | * | |
414 | * LOCKING: | |
415 | * EH context. | |
416 | */ | |
417 | static void ata_force_xfermask(struct ata_device *dev) | |
418 | { | |
419 | int devno = dev->link->pmp + dev->devno; | |
420 | int alt_devno = devno; | |
421 | int i; | |
422 | ||
b1c72916 TH |
423 | /* allow n.15/16 for devices attached to host port */ |
424 | if (ata_is_host_link(dev->link)) | |
425 | alt_devno += 15; | |
33267325 TH |
426 | |
427 | for (i = ata_force_tbl_size - 1; i >= 0; i--) { | |
428 | const struct ata_force_ent *fe = &ata_force_tbl[i]; | |
429 | unsigned long pio_mask, mwdma_mask, udma_mask; | |
430 | ||
431 | if (fe->port != -1 && fe->port != dev->link->ap->print_id) | |
432 | continue; | |
433 | ||
434 | if (fe->device != -1 && fe->device != devno && | |
435 | fe->device != alt_devno) | |
436 | continue; | |
437 | ||
438 | if (!fe->param.xfer_mask) | |
439 | continue; | |
440 | ||
441 | ata_unpack_xfermask(fe->param.xfer_mask, | |
442 | &pio_mask, &mwdma_mask, &udma_mask); | |
443 | if (udma_mask) | |
444 | dev->udma_mask = udma_mask; | |
445 | else if (mwdma_mask) { | |
446 | dev->udma_mask = 0; | |
447 | dev->mwdma_mask = mwdma_mask; | |
448 | } else { | |
449 | dev->udma_mask = 0; | |
450 | dev->mwdma_mask = 0; | |
451 | dev->pio_mask = pio_mask; | |
452 | } | |
453 | ||
a9a79dfe JP |
454 | ata_dev_notice(dev, "FORCE: xfer_mask set to %s\n", |
455 | fe->param.name); | |
33267325 TH |
456 | return; |
457 | } | |
458 | } | |
459 | ||
460 | /** | |
461 | * ata_force_horkage - force horkage according to libata.force | |
462 | * @dev: ATA device of interest | |
463 | * | |
464 | * Force horkage according to libata.force and whine about it. | |
465 | * For consistency with link selection, device number 15 selects | |
466 | * the first device connected to the host link. | |
467 | * | |
468 | * LOCKING: | |
469 | * EH context. | |
470 | */ | |
471 | static void ata_force_horkage(struct ata_device *dev) | |
472 | { | |
473 | int devno = dev->link->pmp + dev->devno; | |
474 | int alt_devno = devno; | |
475 | int i; | |
476 | ||
b1c72916 TH |
477 | /* allow n.15/16 for devices attached to host port */ |
478 | if (ata_is_host_link(dev->link)) | |
479 | alt_devno += 15; | |
33267325 TH |
480 | |
481 | for (i = 0; i < ata_force_tbl_size; i++) { | |
482 | const struct ata_force_ent *fe = &ata_force_tbl[i]; | |
483 | ||
484 | if (fe->port != -1 && fe->port != dev->link->ap->print_id) | |
485 | continue; | |
486 | ||
487 | if (fe->device != -1 && fe->device != devno && | |
488 | fe->device != alt_devno) | |
489 | continue; | |
490 | ||
491 | if (!(~dev->horkage & fe->param.horkage_on) && | |
492 | !(dev->horkage & fe->param.horkage_off)) | |
493 | continue; | |
494 | ||
495 | dev->horkage |= fe->param.horkage_on; | |
496 | dev->horkage &= ~fe->param.horkage_off; | |
497 | ||
a9a79dfe JP |
498 | ata_dev_notice(dev, "FORCE: horkage modified (%s)\n", |
499 | fe->param.name); | |
33267325 TH |
500 | } |
501 | } | |
502 | ||
436d34b3 TH |
503 | /** |
504 | * atapi_cmd_type - Determine ATAPI command type from SCSI opcode | |
505 | * @opcode: SCSI opcode | |
506 | * | |
507 | * Determine ATAPI command type from @opcode. | |
508 | * | |
509 | * LOCKING: | |
510 | * None. | |
511 | * | |
512 | * RETURNS: | |
513 | * ATAPI_{READ|WRITE|READ_CD|PASS_THRU|MISC} | |
514 | */ | |
515 | int atapi_cmd_type(u8 opcode) | |
516 | { | |
517 | switch (opcode) { | |
518 | case GPCMD_READ_10: | |
519 | case GPCMD_READ_12: | |
520 | return ATAPI_READ; | |
521 | ||
522 | case GPCMD_WRITE_10: | |
523 | case GPCMD_WRITE_12: | |
524 | case GPCMD_WRITE_AND_VERIFY_10: | |
525 | return ATAPI_WRITE; | |
526 | ||
527 | case GPCMD_READ_CD: | |
528 | case GPCMD_READ_CD_MSF: | |
529 | return ATAPI_READ_CD; | |
530 | ||
e52dcc48 TH |
531 | case ATA_16: |
532 | case ATA_12: | |
533 | if (atapi_passthru16) | |
534 | return ATAPI_PASS_THRU; | |
535 | /* fall thru */ | |
436d34b3 TH |
536 | default: |
537 | return ATAPI_MISC; | |
538 | } | |
539 | } | |
540 | ||
1da177e4 LT |
541 | /** |
542 | * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure | |
543 | * @tf: Taskfile to convert | |
1da177e4 | 544 | * @pmp: Port multiplier port |
9977126c TH |
545 | * @is_cmd: This FIS is for command |
546 | * @fis: Buffer into which data will output | |
1da177e4 LT |
547 | * |
548 | * Converts a standard ATA taskfile to a Serial ATA | |
549 | * FIS structure (Register - Host to Device). | |
550 | * | |
551 | * LOCKING: | |
552 | * Inherited from caller. | |
553 | */ | |
9977126c | 554 | void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis) |
1da177e4 | 555 | { |
9977126c TH |
556 | fis[0] = 0x27; /* Register - Host to Device FIS */ |
557 | fis[1] = pmp & 0xf; /* Port multiplier number*/ | |
558 | if (is_cmd) | |
559 | fis[1] |= (1 << 7); /* bit 7 indicates Command FIS */ | |
560 | ||
1da177e4 LT |
561 | fis[2] = tf->command; |
562 | fis[3] = tf->feature; | |
563 | ||
564 | fis[4] = tf->lbal; | |
565 | fis[5] = tf->lbam; | |
566 | fis[6] = tf->lbah; | |
567 | fis[7] = tf->device; | |
568 | ||
569 | fis[8] = tf->hob_lbal; | |
570 | fis[9] = tf->hob_lbam; | |
571 | fis[10] = tf->hob_lbah; | |
572 | fis[11] = tf->hob_feature; | |
573 | ||
574 | fis[12] = tf->nsect; | |
575 | fis[13] = tf->hob_nsect; | |
576 | fis[14] = 0; | |
577 | fis[15] = tf->ctl; | |
578 | ||
86a565e6 MC |
579 | fis[16] = tf->auxiliary & 0xff; |
580 | fis[17] = (tf->auxiliary >> 8) & 0xff; | |
581 | fis[18] = (tf->auxiliary >> 16) & 0xff; | |
582 | fis[19] = (tf->auxiliary >> 24) & 0xff; | |
1da177e4 LT |
583 | } |
584 | ||
585 | /** | |
586 | * ata_tf_from_fis - Convert SATA FIS to ATA taskfile | |
587 | * @fis: Buffer from which data will be input | |
588 | * @tf: Taskfile to output | |
589 | * | |
e12a1be6 | 590 | * Converts a serial ATA FIS structure to a standard ATA taskfile. |
1da177e4 LT |
591 | * |
592 | * LOCKING: | |
593 | * Inherited from caller. | |
594 | */ | |
595 | ||
057ace5e | 596 | void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf) |
1da177e4 LT |
597 | { |
598 | tf->command = fis[2]; /* status */ | |
599 | tf->feature = fis[3]; /* error */ | |
600 | ||
601 | tf->lbal = fis[4]; | |
602 | tf->lbam = fis[5]; | |
603 | tf->lbah = fis[6]; | |
604 | tf->device = fis[7]; | |
605 | ||
606 | tf->hob_lbal = fis[8]; | |
607 | tf->hob_lbam = fis[9]; | |
608 | tf->hob_lbah = fis[10]; | |
609 | ||
610 | tf->nsect = fis[12]; | |
611 | tf->hob_nsect = fis[13]; | |
612 | } | |
613 | ||
8cbd6df1 AL |
614 | static const u8 ata_rw_cmds[] = { |
615 | /* pio multi */ | |
616 | ATA_CMD_READ_MULTI, | |
617 | ATA_CMD_WRITE_MULTI, | |
618 | ATA_CMD_READ_MULTI_EXT, | |
619 | ATA_CMD_WRITE_MULTI_EXT, | |
9a3dccc4 TH |
620 | 0, |
621 | 0, | |
622 | 0, | |
623 | ATA_CMD_WRITE_MULTI_FUA_EXT, | |
8cbd6df1 AL |
624 | /* pio */ |
625 | ATA_CMD_PIO_READ, | |
626 | ATA_CMD_PIO_WRITE, | |
627 | ATA_CMD_PIO_READ_EXT, | |
628 | ATA_CMD_PIO_WRITE_EXT, | |
9a3dccc4 TH |
629 | 0, |
630 | 0, | |
631 | 0, | |
632 | 0, | |
8cbd6df1 AL |
633 | /* dma */ |
634 | ATA_CMD_READ, | |
635 | ATA_CMD_WRITE, | |
636 | ATA_CMD_READ_EXT, | |
9a3dccc4 TH |
637 | ATA_CMD_WRITE_EXT, |
638 | 0, | |
639 | 0, | |
640 | 0, | |
641 | ATA_CMD_WRITE_FUA_EXT | |
8cbd6df1 | 642 | }; |
1da177e4 LT |
643 | |
644 | /** | |
8cbd6df1 | 645 | * ata_rwcmd_protocol - set taskfile r/w commands and protocol |
bd056d7e TH |
646 | * @tf: command to examine and configure |
647 | * @dev: device tf belongs to | |
1da177e4 | 648 | * |
2e9edbf8 | 649 | * Examine the device configuration and tf->flags to calculate |
8cbd6df1 | 650 | * the proper read/write commands and protocol to use. |
1da177e4 LT |
651 | * |
652 | * LOCKING: | |
653 | * caller. | |
654 | */ | |
bd056d7e | 655 | static int ata_rwcmd_protocol(struct ata_taskfile *tf, struct ata_device *dev) |
1da177e4 | 656 | { |
9a3dccc4 | 657 | u8 cmd; |
1da177e4 | 658 | |
9a3dccc4 | 659 | int index, fua, lba48, write; |
2e9edbf8 | 660 | |
9a3dccc4 | 661 | fua = (tf->flags & ATA_TFLAG_FUA) ? 4 : 0; |
8cbd6df1 AL |
662 | lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0; |
663 | write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0; | |
1da177e4 | 664 | |
8cbd6df1 AL |
665 | if (dev->flags & ATA_DFLAG_PIO) { |
666 | tf->protocol = ATA_PROT_PIO; | |
9a3dccc4 | 667 | index = dev->multi_count ? 0 : 8; |
9af5c9c9 | 668 | } else if (lba48 && (dev->link->ap->flags & ATA_FLAG_PIO_LBA48)) { |
8d238e01 AC |
669 | /* Unable to use DMA due to host limitation */ |
670 | tf->protocol = ATA_PROT_PIO; | |
0565c26d | 671 | index = dev->multi_count ? 0 : 8; |
8cbd6df1 AL |
672 | } else { |
673 | tf->protocol = ATA_PROT_DMA; | |
9a3dccc4 | 674 | index = 16; |
8cbd6df1 | 675 | } |
1da177e4 | 676 | |
9a3dccc4 TH |
677 | cmd = ata_rw_cmds[index + fua + lba48 + write]; |
678 | if (cmd) { | |
679 | tf->command = cmd; | |
680 | return 0; | |
681 | } | |
682 | return -1; | |
1da177e4 LT |
683 | } |
684 | ||
35b649fe TH |
685 | /** |
686 | * ata_tf_read_block - Read block address from ATA taskfile | |
687 | * @tf: ATA taskfile of interest | |
688 | * @dev: ATA device @tf belongs to | |
689 | * | |
690 | * LOCKING: | |
691 | * None. | |
692 | * | |
693 | * Read block address from @tf. This function can handle all | |
694 | * three address formats - LBA, LBA48 and CHS. tf->protocol and | |
695 | * flags select the address format to use. | |
696 | * | |
697 | * RETURNS: | |
698 | * Block address read from @tf. | |
699 | */ | |
cffd1ee9 | 700 | u64 ata_tf_read_block(const struct ata_taskfile *tf, struct ata_device *dev) |
35b649fe TH |
701 | { |
702 | u64 block = 0; | |
703 | ||
fe16d4f2 | 704 | if (tf->flags & ATA_TFLAG_LBA) { |
35b649fe TH |
705 | if (tf->flags & ATA_TFLAG_LBA48) { |
706 | block |= (u64)tf->hob_lbah << 40; | |
707 | block |= (u64)tf->hob_lbam << 32; | |
44901a96 | 708 | block |= (u64)tf->hob_lbal << 24; |
35b649fe TH |
709 | } else |
710 | block |= (tf->device & 0xf) << 24; | |
711 | ||
712 | block |= tf->lbah << 16; | |
713 | block |= tf->lbam << 8; | |
714 | block |= tf->lbal; | |
715 | } else { | |
716 | u32 cyl, head, sect; | |
717 | ||
718 | cyl = tf->lbam | (tf->lbah << 8); | |
719 | head = tf->device & 0xf; | |
720 | sect = tf->lbal; | |
721 | ||
ac8672ea | 722 | if (!sect) { |
a9a79dfe JP |
723 | ata_dev_warn(dev, |
724 | "device reported invalid CHS sector 0\n"); | |
cffd1ee9 | 725 | return U64_MAX; |
ac8672ea TH |
726 | } |
727 | ||
728 | block = (cyl * dev->heads + head) * dev->sectors + sect - 1; | |
35b649fe TH |
729 | } |
730 | ||
731 | return block; | |
732 | } | |
733 | ||
bd056d7e TH |
734 | /** |
735 | * ata_build_rw_tf - Build ATA taskfile for given read/write request | |
736 | * @tf: Target ATA taskfile | |
737 | * @dev: ATA device @tf belongs to | |
738 | * @block: Block address | |
739 | * @n_block: Number of blocks | |
740 | * @tf_flags: RW/FUA etc... | |
741 | * @tag: tag | |
742 | * | |
743 | * LOCKING: | |
744 | * None. | |
745 | * | |
746 | * Build ATA taskfile @tf for read/write request described by | |
747 | * @block, @n_block, @tf_flags and @tag on @dev. | |
748 | * | |
749 | * RETURNS: | |
750 | * | |
751 | * 0 on success, -ERANGE if the request is too large for @dev, | |
752 | * -EINVAL if the request is invalid. | |
753 | */ | |
754 | int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, | |
755 | u64 block, u32 n_block, unsigned int tf_flags, | |
756 | unsigned int tag) | |
757 | { | |
758 | tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; | |
759 | tf->flags |= tf_flags; | |
760 | ||
6d1245bf | 761 | if (ata_ncq_enabled(dev) && likely(tag != ATA_TAG_INTERNAL)) { |
bd056d7e TH |
762 | /* yay, NCQ */ |
763 | if (!lba_48_ok(block, n_block)) | |
764 | return -ERANGE; | |
765 | ||
766 | tf->protocol = ATA_PROT_NCQ; | |
767 | tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48; | |
768 | ||
769 | if (tf->flags & ATA_TFLAG_WRITE) | |
770 | tf->command = ATA_CMD_FPDMA_WRITE; | |
771 | else | |
772 | tf->command = ATA_CMD_FPDMA_READ; | |
773 | ||
774 | tf->nsect = tag << 3; | |
775 | tf->hob_feature = (n_block >> 8) & 0xff; | |
776 | tf->feature = n_block & 0xff; | |
777 | ||
778 | tf->hob_lbah = (block >> 40) & 0xff; | |
779 | tf->hob_lbam = (block >> 32) & 0xff; | |
780 | tf->hob_lbal = (block >> 24) & 0xff; | |
781 | tf->lbah = (block >> 16) & 0xff; | |
782 | tf->lbam = (block >> 8) & 0xff; | |
783 | tf->lbal = block & 0xff; | |
784 | ||
9ca7cfa4 | 785 | tf->device = ATA_LBA; |
bd056d7e TH |
786 | if (tf->flags & ATA_TFLAG_FUA) |
787 | tf->device |= 1 << 7; | |
788 | } else if (dev->flags & ATA_DFLAG_LBA) { | |
789 | tf->flags |= ATA_TFLAG_LBA; | |
790 | ||
791 | if (lba_28_ok(block, n_block)) { | |
792 | /* use LBA28 */ | |
793 | tf->device |= (block >> 24) & 0xf; | |
794 | } else if (lba_48_ok(block, n_block)) { | |
795 | if (!(dev->flags & ATA_DFLAG_LBA48)) | |
796 | return -ERANGE; | |
797 | ||
798 | /* use LBA48 */ | |
799 | tf->flags |= ATA_TFLAG_LBA48; | |
800 | ||
801 | tf->hob_nsect = (n_block >> 8) & 0xff; | |
802 | ||
803 | tf->hob_lbah = (block >> 40) & 0xff; | |
804 | tf->hob_lbam = (block >> 32) & 0xff; | |
805 | tf->hob_lbal = (block >> 24) & 0xff; | |
806 | } else | |
807 | /* request too large even for LBA48 */ | |
808 | return -ERANGE; | |
809 | ||
810 | if (unlikely(ata_rwcmd_protocol(tf, dev) < 0)) | |
811 | return -EINVAL; | |
812 | ||
813 | tf->nsect = n_block & 0xff; | |
814 | ||
815 | tf->lbah = (block >> 16) & 0xff; | |
816 | tf->lbam = (block >> 8) & 0xff; | |
817 | tf->lbal = block & 0xff; | |
818 | ||
819 | tf->device |= ATA_LBA; | |
820 | } else { | |
821 | /* CHS */ | |
822 | u32 sect, head, cyl, track; | |
823 | ||
824 | /* The request -may- be too large for CHS addressing. */ | |
825 | if (!lba_28_ok(block, n_block)) | |
826 | return -ERANGE; | |
827 | ||
828 | if (unlikely(ata_rwcmd_protocol(tf, dev) < 0)) | |
829 | return -EINVAL; | |
830 | ||
831 | /* Convert LBA to CHS */ | |
832 | track = (u32)block / dev->sectors; | |
833 | cyl = track / dev->heads; | |
834 | head = track % dev->heads; | |
835 | sect = (u32)block % dev->sectors + 1; | |
836 | ||
837 | DPRINTK("block %u track %u cyl %u head %u sect %u\n", | |
838 | (u32)block, track, cyl, head, sect); | |
839 | ||
840 | /* Check whether the converted CHS can fit. | |
841 | Cylinder: 0-65535 | |
842 | Head: 0-15 | |
843 | Sector: 1-255*/ | |
844 | if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) | |
845 | return -ERANGE; | |
846 | ||
847 | tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ | |
848 | tf->lbal = sect; | |
849 | tf->lbam = cyl; | |
850 | tf->lbah = cyl >> 8; | |
851 | tf->device |= head; | |
852 | } | |
853 | ||
854 | return 0; | |
855 | } | |
856 | ||
cb95d562 TH |
857 | /** |
858 | * ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask | |
859 | * @pio_mask: pio_mask | |
860 | * @mwdma_mask: mwdma_mask | |
861 | * @udma_mask: udma_mask | |
862 | * | |
863 | * Pack @pio_mask, @mwdma_mask and @udma_mask into a single | |
864 | * unsigned int xfer_mask. | |
865 | * | |
866 | * LOCKING: | |
867 | * None. | |
868 | * | |
869 | * RETURNS: | |
870 | * Packed xfer_mask. | |
871 | */ | |
7dc951ae TH |
872 | unsigned long ata_pack_xfermask(unsigned long pio_mask, |
873 | unsigned long mwdma_mask, | |
874 | unsigned long udma_mask) | |
cb95d562 TH |
875 | { |
876 | return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) | | |
877 | ((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) | | |
878 | ((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA); | |
879 | } | |
880 | ||
c0489e4e TH |
881 | /** |
882 | * ata_unpack_xfermask - Unpack xfer_mask into pio, mwdma and udma masks | |
883 | * @xfer_mask: xfer_mask to unpack | |
884 | * @pio_mask: resulting pio_mask | |
885 | * @mwdma_mask: resulting mwdma_mask | |
886 | * @udma_mask: resulting udma_mask | |
887 | * | |
888 | * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask. | |
c9b5560a | 889 | * Any NULL destination masks will be ignored. |
c0489e4e | 890 | */ |
7dc951ae TH |
891 | void ata_unpack_xfermask(unsigned long xfer_mask, unsigned long *pio_mask, |
892 | unsigned long *mwdma_mask, unsigned long *udma_mask) | |
c0489e4e TH |
893 | { |
894 | if (pio_mask) | |
895 | *pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO; | |
896 | if (mwdma_mask) | |
897 | *mwdma_mask = (xfer_mask & ATA_MASK_MWDMA) >> ATA_SHIFT_MWDMA; | |
898 | if (udma_mask) | |
899 | *udma_mask = (xfer_mask & ATA_MASK_UDMA) >> ATA_SHIFT_UDMA; | |
900 | } | |
901 | ||
cb95d562 | 902 | static const struct ata_xfer_ent { |
be9a50c8 | 903 | int shift, bits; |
cb95d562 TH |
904 | u8 base; |
905 | } ata_xfer_tbl[] = { | |
70cd071e TH |
906 | { ATA_SHIFT_PIO, ATA_NR_PIO_MODES, XFER_PIO_0 }, |
907 | { ATA_SHIFT_MWDMA, ATA_NR_MWDMA_MODES, XFER_MW_DMA_0 }, | |
908 | { ATA_SHIFT_UDMA, ATA_NR_UDMA_MODES, XFER_UDMA_0 }, | |
cb95d562 TH |
909 | { -1, }, |
910 | }; | |
911 | ||
912 | /** | |
913 | * ata_xfer_mask2mode - Find matching XFER_* for the given xfer_mask | |
914 | * @xfer_mask: xfer_mask of interest | |
915 | * | |
916 | * Return matching XFER_* value for @xfer_mask. Only the highest | |
917 | * bit of @xfer_mask is considered. | |
918 | * | |
919 | * LOCKING: | |
920 | * None. | |
921 | * | |
922 | * RETURNS: | |
70cd071e | 923 | * Matching XFER_* value, 0xff if no match found. |
cb95d562 | 924 | */ |
7dc951ae | 925 | u8 ata_xfer_mask2mode(unsigned long xfer_mask) |
cb95d562 TH |
926 | { |
927 | int highbit = fls(xfer_mask) - 1; | |
928 | const struct ata_xfer_ent *ent; | |
929 | ||
930 | for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) | |
931 | if (highbit >= ent->shift && highbit < ent->shift + ent->bits) | |
932 | return ent->base + highbit - ent->shift; | |
70cd071e | 933 | return 0xff; |
cb95d562 TH |
934 | } |
935 | ||
936 | /** | |
937 | * ata_xfer_mode2mask - Find matching xfer_mask for XFER_* | |
938 | * @xfer_mode: XFER_* of interest | |
939 | * | |
940 | * Return matching xfer_mask for @xfer_mode. | |
941 | * | |
942 | * LOCKING: | |
943 | * None. | |
944 | * | |
945 | * RETURNS: | |
946 | * Matching xfer_mask, 0 if no match found. | |
947 | */ | |
7dc951ae | 948 | unsigned long ata_xfer_mode2mask(u8 xfer_mode) |
cb95d562 TH |
949 | { |
950 | const struct ata_xfer_ent *ent; | |
951 | ||
952 | for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) | |
953 | if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) | |
70cd071e TH |
954 | return ((2 << (ent->shift + xfer_mode - ent->base)) - 1) |
955 | & ~((1 << ent->shift) - 1); | |
cb95d562 TH |
956 | return 0; |
957 | } | |
958 | ||
959 | /** | |
960 | * ata_xfer_mode2shift - Find matching xfer_shift for XFER_* | |
961 | * @xfer_mode: XFER_* of interest | |
962 | * | |
963 | * Return matching xfer_shift for @xfer_mode. | |
964 | * | |
965 | * LOCKING: | |
966 | * None. | |
967 | * | |
968 | * RETURNS: | |
969 | * Matching xfer_shift, -1 if no match found. | |
970 | */ | |
7dc951ae | 971 | int ata_xfer_mode2shift(unsigned long xfer_mode) |
cb95d562 TH |
972 | { |
973 | const struct ata_xfer_ent *ent; | |
974 | ||
975 | for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) | |
976 | if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) | |
977 | return ent->shift; | |
978 | return -1; | |
979 | } | |
980 | ||
1da177e4 | 981 | /** |
1da7b0d0 TH |
982 | * ata_mode_string - convert xfer_mask to string |
983 | * @xfer_mask: mask of bits supported; only highest bit counts. | |
1da177e4 LT |
984 | * |
985 | * Determine string which represents the highest speed | |
1da7b0d0 | 986 | * (highest bit in @modemask). |
1da177e4 LT |
987 | * |
988 | * LOCKING: | |
989 | * None. | |
990 | * | |
991 | * RETURNS: | |
992 | * Constant C string representing highest speed listed in | |
1da7b0d0 | 993 | * @mode_mask, or the constant C string "<n/a>". |
1da177e4 | 994 | */ |
7dc951ae | 995 | const char *ata_mode_string(unsigned long xfer_mask) |
1da177e4 | 996 | { |
75f554bc TH |
997 | static const char * const xfer_mode_str[] = { |
998 | "PIO0", | |
999 | "PIO1", | |
1000 | "PIO2", | |
1001 | "PIO3", | |
1002 | "PIO4", | |
b352e57d AC |
1003 | "PIO5", |
1004 | "PIO6", | |
75f554bc TH |
1005 | "MWDMA0", |
1006 | "MWDMA1", | |
1007 | "MWDMA2", | |
b352e57d AC |
1008 | "MWDMA3", |
1009 | "MWDMA4", | |
75f554bc TH |
1010 | "UDMA/16", |
1011 | "UDMA/25", | |
1012 | "UDMA/33", | |
1013 | "UDMA/44", | |
1014 | "UDMA/66", | |
1015 | "UDMA/100", | |
1016 | "UDMA/133", | |
1017 | "UDMA7", | |
1018 | }; | |
1da7b0d0 | 1019 | int highbit; |
1da177e4 | 1020 | |
1da7b0d0 TH |
1021 | highbit = fls(xfer_mask) - 1; |
1022 | if (highbit >= 0 && highbit < ARRAY_SIZE(xfer_mode_str)) | |
1023 | return xfer_mode_str[highbit]; | |
1da177e4 | 1024 | return "<n/a>"; |
1da177e4 LT |
1025 | } |
1026 | ||
d9027470 | 1027 | const char *sata_spd_string(unsigned int spd) |
4c360c81 TH |
1028 | { |
1029 | static const char * const spd_str[] = { | |
1030 | "1.5 Gbps", | |
1031 | "3.0 Gbps", | |
8522ee25 | 1032 | "6.0 Gbps", |
4c360c81 TH |
1033 | }; |
1034 | ||
1035 | if (spd == 0 || (spd - 1) >= ARRAY_SIZE(spd_str)) | |
1036 | return "<unknown>"; | |
1037 | return spd_str[spd - 1]; | |
1038 | } | |
1039 | ||
1da177e4 LT |
1040 | /** |
1041 | * ata_dev_classify - determine device type based on ATA-spec signature | |
1042 | * @tf: ATA taskfile register set for device to be identified | |
1043 | * | |
1044 | * Determine from taskfile register contents whether a device is | |
1045 | * ATA or ATAPI, as per "Signature and persistence" section | |
1046 | * of ATA/PI spec (volume 1, sect 5.14). | |
1047 | * | |
1048 | * LOCKING: | |
1049 | * None. | |
1050 | * | |
1051 | * RETURNS: | |
9162c657 HR |
1052 | * Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, %ATA_DEV_PMP, |
1053 | * %ATA_DEV_ZAC, or %ATA_DEV_UNKNOWN the event of failure. | |
1da177e4 | 1054 | */ |
057ace5e | 1055 | unsigned int ata_dev_classify(const struct ata_taskfile *tf) |
1da177e4 LT |
1056 | { |
1057 | /* Apple's open source Darwin code hints that some devices only | |
1058 | * put a proper signature into the LBA mid/high registers, | |
1059 | * So, we only check those. It's sufficient for uniqueness. | |
633273a3 TH |
1060 | * |
1061 | * ATA/ATAPI-7 (d1532v1r1: Feb. 19, 2003) specified separate | |
1062 | * signatures for ATA and ATAPI devices attached on SerialATA, | |
1063 | * 0x3c/0xc3 and 0x69/0x96 respectively. However, SerialATA | |
1064 | * spec has never mentioned about using different signatures | |
1065 | * for ATA/ATAPI devices. Then, Serial ATA II: Port | |
1066 | * Multiplier specification began to use 0x69/0x96 to identify | |
1067 | * port multpliers and 0x3c/0xc3 to identify SEMB device. | |
1068 | * ATA/ATAPI-7 dropped descriptions about 0x3c/0xc3 and | |
1069 | * 0x69/0x96 shortly and described them as reserved for | |
1070 | * SerialATA. | |
1071 | * | |
1072 | * We follow the current spec and consider that 0x69/0x96 | |
1073 | * identifies a port multiplier and 0x3c/0xc3 a SEMB device. | |
79b42bab TH |
1074 | * Unfortunately, WDC WD1600JS-62MHB5 (a hard drive) reports |
1075 | * SEMB signature. This is worked around in | |
1076 | * ata_dev_read_id(). | |
1da177e4 | 1077 | */ |
633273a3 | 1078 | if ((tf->lbam == 0) && (tf->lbah == 0)) { |
1da177e4 LT |
1079 | DPRINTK("found ATA device by sig\n"); |
1080 | return ATA_DEV_ATA; | |
1081 | } | |
1082 | ||
633273a3 | 1083 | if ((tf->lbam == 0x14) && (tf->lbah == 0xeb)) { |
1da177e4 LT |
1084 | DPRINTK("found ATAPI device by sig\n"); |
1085 | return ATA_DEV_ATAPI; | |
1086 | } | |
1087 | ||
633273a3 TH |
1088 | if ((tf->lbam == 0x69) && (tf->lbah == 0x96)) { |
1089 | DPRINTK("found PMP device by sig\n"); | |
1090 | return ATA_DEV_PMP; | |
1091 | } | |
1092 | ||
1093 | if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) { | |
79b42bab TH |
1094 | DPRINTK("found SEMB device by sig (could be ATA device)\n"); |
1095 | return ATA_DEV_SEMB; | |
633273a3 TH |
1096 | } |
1097 | ||
9162c657 HR |
1098 | if ((tf->lbam == 0xcd) && (tf->lbah == 0xab)) { |
1099 | DPRINTK("found ZAC device by sig\n"); | |
1100 | return ATA_DEV_ZAC; | |
1101 | } | |
1102 | ||
1da177e4 LT |
1103 | DPRINTK("unknown device\n"); |
1104 | return ATA_DEV_UNKNOWN; | |
1105 | } | |
1106 | ||
1da177e4 | 1107 | /** |
6a62a04d | 1108 | * ata_id_string - Convert IDENTIFY DEVICE page into string |
1da177e4 LT |
1109 | * @id: IDENTIFY DEVICE results we will examine |
1110 | * @s: string into which data is output | |
1111 | * @ofs: offset into identify device page | |
1112 | * @len: length of string to return. must be an even number. | |
1113 | * | |
1114 | * The strings in the IDENTIFY DEVICE page are broken up into | |
1115 | * 16-bit chunks. Run through the string, and output each | |
1116 | * 8-bit chunk linearly, regardless of platform. | |
1117 | * | |
1118 | * LOCKING: | |
1119 | * caller. | |
1120 | */ | |
1121 | ||
6a62a04d TH |
1122 | void ata_id_string(const u16 *id, unsigned char *s, |
1123 | unsigned int ofs, unsigned int len) | |
1da177e4 LT |
1124 | { |
1125 | unsigned int c; | |
1126 | ||
963e4975 AC |
1127 | BUG_ON(len & 1); |
1128 | ||
1da177e4 LT |
1129 | while (len > 0) { |
1130 | c = id[ofs] >> 8; | |
1131 | *s = c; | |
1132 | s++; | |
1133 | ||
1134 | c = id[ofs] & 0xff; | |
1135 | *s = c; | |
1136 | s++; | |
1137 | ||
1138 | ofs++; | |
1139 | len -= 2; | |
1140 | } | |
1141 | } | |
1142 | ||
0e949ff3 | 1143 | /** |
6a62a04d | 1144 | * ata_id_c_string - Convert IDENTIFY DEVICE page into C string |
0e949ff3 TH |
1145 | * @id: IDENTIFY DEVICE results we will examine |
1146 | * @s: string into which data is output | |
1147 | * @ofs: offset into identify device page | |
1148 | * @len: length of string to return. must be an odd number. | |
1149 | * | |
6a62a04d | 1150 | * This function is identical to ata_id_string except that it |
0e949ff3 TH |
1151 | * trims trailing spaces and terminates the resulting string with |
1152 | * null. @len must be actual maximum length (even number) + 1. | |
1153 | * | |
1154 | * LOCKING: | |
1155 | * caller. | |
1156 | */ | |
6a62a04d TH |
1157 | void ata_id_c_string(const u16 *id, unsigned char *s, |
1158 | unsigned int ofs, unsigned int len) | |
0e949ff3 TH |
1159 | { |
1160 | unsigned char *p; | |
1161 | ||
6a62a04d | 1162 | ata_id_string(id, s, ofs, len - 1); |
0e949ff3 TH |
1163 | |
1164 | p = s + strnlen(s, len - 1); | |
1165 | while (p > s && p[-1] == ' ') | |
1166 | p--; | |
1167 | *p = '\0'; | |
1168 | } | |
0baab86b | 1169 | |
db6f8759 TH |
1170 | static u64 ata_id_n_sectors(const u16 *id) |
1171 | { | |
1172 | if (ata_id_has_lba(id)) { | |
1173 | if (ata_id_has_lba48(id)) | |
968e594a | 1174 | return ata_id_u64(id, ATA_ID_LBA_CAPACITY_2); |
db6f8759 | 1175 | else |
968e594a | 1176 | return ata_id_u32(id, ATA_ID_LBA_CAPACITY); |
db6f8759 TH |
1177 | } else { |
1178 | if (ata_id_current_chs_valid(id)) | |
968e594a RH |
1179 | return id[ATA_ID_CUR_CYLS] * id[ATA_ID_CUR_HEADS] * |
1180 | id[ATA_ID_CUR_SECTORS]; | |
db6f8759 | 1181 | else |
968e594a RH |
1182 | return id[ATA_ID_CYLS] * id[ATA_ID_HEADS] * |
1183 | id[ATA_ID_SECTORS]; | |
db6f8759 TH |
1184 | } |
1185 | } | |
1186 | ||
a5987e0a | 1187 | u64 ata_tf_to_lba48(const struct ata_taskfile *tf) |
1e999736 AC |
1188 | { |
1189 | u64 sectors = 0; | |
1190 | ||
1191 | sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40; | |
1192 | sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32; | |
ba14a9c2 | 1193 | sectors |= ((u64)(tf->hob_lbal & 0xff)) << 24; |
1e999736 AC |
1194 | sectors |= (tf->lbah & 0xff) << 16; |
1195 | sectors |= (tf->lbam & 0xff) << 8; | |
1196 | sectors |= (tf->lbal & 0xff); | |
1197 | ||
a5987e0a | 1198 | return sectors; |
1e999736 AC |
1199 | } |
1200 | ||
a5987e0a | 1201 | u64 ata_tf_to_lba(const struct ata_taskfile *tf) |
1e999736 AC |
1202 | { |
1203 | u64 sectors = 0; | |
1204 | ||
1205 | sectors |= (tf->device & 0x0f) << 24; | |
1206 | sectors |= (tf->lbah & 0xff) << 16; | |
1207 | sectors |= (tf->lbam & 0xff) << 8; | |
1208 | sectors |= (tf->lbal & 0xff); | |
1209 | ||
a5987e0a | 1210 | return sectors; |
1e999736 AC |
1211 | } |
1212 | ||
1213 | /** | |
c728a914 TH |
1214 | * ata_read_native_max_address - Read native max address |
1215 | * @dev: target device | |
1216 | * @max_sectors: out parameter for the result native max address | |
1e999736 | 1217 | * |
c728a914 TH |
1218 | * Perform an LBA48 or LBA28 native size query upon the device in |
1219 | * question. | |
1e999736 | 1220 | * |
c728a914 TH |
1221 | * RETURNS: |
1222 | * 0 on success, -EACCES if command is aborted by the drive. | |
1223 | * -EIO on other errors. | |
1e999736 | 1224 | */ |
c728a914 | 1225 | static int ata_read_native_max_address(struct ata_device *dev, u64 *max_sectors) |
1e999736 | 1226 | { |
c728a914 | 1227 | unsigned int err_mask; |
1e999736 | 1228 | struct ata_taskfile tf; |
c728a914 | 1229 | int lba48 = ata_id_has_lba48(dev->id); |
1e999736 AC |
1230 | |
1231 | ata_tf_init(dev, &tf); | |
1232 | ||
c728a914 | 1233 | /* always clear all address registers */ |
1e999736 | 1234 | tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; |
1e999736 | 1235 | |
c728a914 TH |
1236 | if (lba48) { |
1237 | tf.command = ATA_CMD_READ_NATIVE_MAX_EXT; | |
1238 | tf.flags |= ATA_TFLAG_LBA48; | |
1239 | } else | |
1240 | tf.command = ATA_CMD_READ_NATIVE_MAX; | |
1e999736 | 1241 | |
bd18bc04 | 1242 | tf.protocol = ATA_PROT_NODATA; |
c728a914 TH |
1243 | tf.device |= ATA_LBA; |
1244 | ||
2b789108 | 1245 | err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); |
c728a914 | 1246 | if (err_mask) { |
a9a79dfe JP |
1247 | ata_dev_warn(dev, |
1248 | "failed to read native max address (err_mask=0x%x)\n", | |
1249 | err_mask); | |
c728a914 TH |
1250 | if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED)) |
1251 | return -EACCES; | |
1252 | return -EIO; | |
1253 | } | |
1e999736 | 1254 | |
c728a914 | 1255 | if (lba48) |
a5987e0a | 1256 | *max_sectors = ata_tf_to_lba48(&tf) + 1; |
c728a914 | 1257 | else |
a5987e0a | 1258 | *max_sectors = ata_tf_to_lba(&tf) + 1; |
2dcb407e | 1259 | if (dev->horkage & ATA_HORKAGE_HPA_SIZE) |
93328e11 | 1260 | (*max_sectors)--; |
c728a914 | 1261 | return 0; |
1e999736 AC |
1262 | } |
1263 | ||
1264 | /** | |
c728a914 TH |
1265 | * ata_set_max_sectors - Set max sectors |
1266 | * @dev: target device | |
6b38d1d1 | 1267 | * @new_sectors: new max sectors value to set for the device |
1e999736 | 1268 | * |
c728a914 TH |
1269 | * Set max sectors of @dev to @new_sectors. |
1270 | * | |
1271 | * RETURNS: | |
1272 | * 0 on success, -EACCES if command is aborted or denied (due to | |
1273 | * previous non-volatile SET_MAX) by the drive. -EIO on other | |
1274 | * errors. | |
1e999736 | 1275 | */ |
05027adc | 1276 | static int ata_set_max_sectors(struct ata_device *dev, u64 new_sectors) |
1e999736 | 1277 | { |
c728a914 | 1278 | unsigned int err_mask; |
1e999736 | 1279 | struct ata_taskfile tf; |
c728a914 | 1280 | int lba48 = ata_id_has_lba48(dev->id); |
1e999736 AC |
1281 | |
1282 | new_sectors--; | |
1283 | ||
1284 | ata_tf_init(dev, &tf); | |
1285 | ||
1e999736 | 1286 | tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; |
c728a914 TH |
1287 | |
1288 | if (lba48) { | |
1289 | tf.command = ATA_CMD_SET_MAX_EXT; | |
1290 | tf.flags |= ATA_TFLAG_LBA48; | |
1291 | ||
1292 | tf.hob_lbal = (new_sectors >> 24) & 0xff; | |
1293 | tf.hob_lbam = (new_sectors >> 32) & 0xff; | |
1294 | tf.hob_lbah = (new_sectors >> 40) & 0xff; | |
1e582ba4 | 1295 | } else { |
c728a914 TH |
1296 | tf.command = ATA_CMD_SET_MAX; |
1297 | ||
1e582ba4 TH |
1298 | tf.device |= (new_sectors >> 24) & 0xf; |
1299 | } | |
1300 | ||
bd18bc04 | 1301 | tf.protocol = ATA_PROT_NODATA; |
c728a914 | 1302 | tf.device |= ATA_LBA; |
1e999736 AC |
1303 | |
1304 | tf.lbal = (new_sectors >> 0) & 0xff; | |
1305 | tf.lbam = (new_sectors >> 8) & 0xff; | |
1306 | tf.lbah = (new_sectors >> 16) & 0xff; | |
1e999736 | 1307 | |
2b789108 | 1308 | err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); |
c728a914 | 1309 | if (err_mask) { |
a9a79dfe JP |
1310 | ata_dev_warn(dev, |
1311 | "failed to set max address (err_mask=0x%x)\n", | |
1312 | err_mask); | |
c728a914 TH |
1313 | if (err_mask == AC_ERR_DEV && |
1314 | (tf.feature & (ATA_ABORTED | ATA_IDNF))) | |
1315 | return -EACCES; | |
1316 | return -EIO; | |
1317 | } | |
1318 | ||
c728a914 | 1319 | return 0; |
1e999736 AC |
1320 | } |
1321 | ||
1322 | /** | |
1323 | * ata_hpa_resize - Resize a device with an HPA set | |
1324 | * @dev: Device to resize | |
1325 | * | |
1326 | * Read the size of an LBA28 or LBA48 disk with HPA features and resize | |
1327 | * it if required to the full size of the media. The caller must check | |
1328 | * the drive has the HPA feature set enabled. | |
05027adc TH |
1329 | * |
1330 | * RETURNS: | |
1331 | * 0 on success, -errno on failure. | |
1e999736 | 1332 | */ |
05027adc | 1333 | static int ata_hpa_resize(struct ata_device *dev) |
1e999736 | 1334 | { |
05027adc TH |
1335 | struct ata_eh_context *ehc = &dev->link->eh_context; |
1336 | int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; | |
445d211b | 1337 | bool unlock_hpa = ata_ignore_hpa || dev->flags & ATA_DFLAG_UNLOCK_HPA; |
05027adc TH |
1338 | u64 sectors = ata_id_n_sectors(dev->id); |
1339 | u64 native_sectors; | |
c728a914 | 1340 | int rc; |
a617c09f | 1341 | |
05027adc | 1342 | /* do we need to do it? */ |
9162c657 | 1343 | if ((dev->class != ATA_DEV_ATA && dev->class != ATA_DEV_ZAC) || |
05027adc TH |
1344 | !ata_id_has_lba(dev->id) || !ata_id_hpa_enabled(dev->id) || |
1345 | (dev->horkage & ATA_HORKAGE_BROKEN_HPA)) | |
c728a914 | 1346 | return 0; |
1e999736 | 1347 | |
05027adc TH |
1348 | /* read native max address */ |
1349 | rc = ata_read_native_max_address(dev, &native_sectors); | |
1350 | if (rc) { | |
dda7aba1 TH |
1351 | /* If device aborted the command or HPA isn't going to |
1352 | * be unlocked, skip HPA resizing. | |
05027adc | 1353 | */ |
445d211b | 1354 | if (rc == -EACCES || !unlock_hpa) { |
a9a79dfe JP |
1355 | ata_dev_warn(dev, |
1356 | "HPA support seems broken, skipping HPA handling\n"); | |
05027adc TH |
1357 | dev->horkage |= ATA_HORKAGE_BROKEN_HPA; |
1358 | ||
1359 | /* we can continue if device aborted the command */ | |
1360 | if (rc == -EACCES) | |
1361 | rc = 0; | |
1e999736 | 1362 | } |
37301a55 | 1363 | |
05027adc TH |
1364 | return rc; |
1365 | } | |
5920dadf | 1366 | dev->n_native_sectors = native_sectors; |
05027adc TH |
1367 | |
1368 | /* nothing to do? */ | |
445d211b | 1369 | if (native_sectors <= sectors || !unlock_hpa) { |
05027adc TH |
1370 | if (!print_info || native_sectors == sectors) |
1371 | return 0; | |
1372 | ||
1373 | if (native_sectors > sectors) | |
a9a79dfe | 1374 | ata_dev_info(dev, |
05027adc TH |
1375 | "HPA detected: current %llu, native %llu\n", |
1376 | (unsigned long long)sectors, | |
1377 | (unsigned long long)native_sectors); | |
1378 | else if (native_sectors < sectors) | |
a9a79dfe JP |
1379 | ata_dev_warn(dev, |
1380 | "native sectors (%llu) is smaller than sectors (%llu)\n", | |
05027adc TH |
1381 | (unsigned long long)native_sectors, |
1382 | (unsigned long long)sectors); | |
1383 | return 0; | |
1384 | } | |
1385 | ||
1386 | /* let's unlock HPA */ | |
1387 | rc = ata_set_max_sectors(dev, native_sectors); | |
1388 | if (rc == -EACCES) { | |
1389 | /* if device aborted the command, skip HPA resizing */ | |
a9a79dfe JP |
1390 | ata_dev_warn(dev, |
1391 | "device aborted resize (%llu -> %llu), skipping HPA handling\n", | |
1392 | (unsigned long long)sectors, | |
1393 | (unsigned long long)native_sectors); | |
05027adc TH |
1394 | dev->horkage |= ATA_HORKAGE_BROKEN_HPA; |
1395 | return 0; | |
1396 | } else if (rc) | |
1397 | return rc; | |
1398 | ||
1399 | /* re-read IDENTIFY data */ | |
1400 | rc = ata_dev_reread_id(dev, 0); | |
1401 | if (rc) { | |
a9a79dfe JP |
1402 | ata_dev_err(dev, |
1403 | "failed to re-read IDENTIFY data after HPA resizing\n"); | |
05027adc TH |
1404 | return rc; |
1405 | } | |
1406 | ||
1407 | if (print_info) { | |
1408 | u64 new_sectors = ata_id_n_sectors(dev->id); | |
a9a79dfe | 1409 | ata_dev_info(dev, |
05027adc TH |
1410 | "HPA unlocked: %llu -> %llu, native %llu\n", |
1411 | (unsigned long long)sectors, | |
1412 | (unsigned long long)new_sectors, | |
1413 | (unsigned long long)native_sectors); | |
1414 | } | |
1415 | ||
1416 | return 0; | |
1e999736 AC |
1417 | } |
1418 | ||
1da177e4 LT |
1419 | /** |
1420 | * ata_dump_id - IDENTIFY DEVICE info debugging output | |
0bd3300a | 1421 | * @id: IDENTIFY DEVICE page to dump |
1da177e4 | 1422 | * |
0bd3300a TH |
1423 | * Dump selected 16-bit words from the given IDENTIFY DEVICE |
1424 | * page. | |
1da177e4 LT |
1425 | * |
1426 | * LOCKING: | |
1427 | * caller. | |
1428 | */ | |
1429 | ||
0bd3300a | 1430 | static inline void ata_dump_id(const u16 *id) |
1da177e4 LT |
1431 | { |
1432 | DPRINTK("49==0x%04x " | |
1433 | "53==0x%04x " | |
1434 | "63==0x%04x " | |
1435 | "64==0x%04x " | |
1436 | "75==0x%04x \n", | |
0bd3300a TH |
1437 | id[49], |
1438 | id[53], | |
1439 | id[63], | |
1440 | id[64], | |
1441 | id[75]); | |
1da177e4 LT |
1442 | DPRINTK("80==0x%04x " |
1443 | "81==0x%04x " | |
1444 | "82==0x%04x " | |
1445 | "83==0x%04x " | |
1446 | "84==0x%04x \n", | |
0bd3300a TH |
1447 | id[80], |
1448 | id[81], | |
1449 | id[82], | |
1450 | id[83], | |
1451 | id[84]); | |
1da177e4 LT |
1452 | DPRINTK("88==0x%04x " |
1453 | "93==0x%04x\n", | |
0bd3300a TH |
1454 | id[88], |
1455 | id[93]); | |
1da177e4 LT |
1456 | } |
1457 | ||
cb95d562 TH |
1458 | /** |
1459 | * ata_id_xfermask - Compute xfermask from the given IDENTIFY data | |
1460 | * @id: IDENTIFY data to compute xfer mask from | |
1461 | * | |
1462 | * Compute the xfermask for this device. This is not as trivial | |
1463 | * as it seems if we must consider early devices correctly. | |
1464 | * | |
1465 | * FIXME: pre IDE drive timing (do we care ?). | |
1466 | * | |
1467 | * LOCKING: | |
1468 | * None. | |
1469 | * | |
1470 | * RETURNS: | |
1471 | * Computed xfermask | |
1472 | */ | |
7dc951ae | 1473 | unsigned long ata_id_xfermask(const u16 *id) |
cb95d562 | 1474 | { |
7dc951ae | 1475 | unsigned long pio_mask, mwdma_mask, udma_mask; |
cb95d562 TH |
1476 | |
1477 | /* Usual case. Word 53 indicates word 64 is valid */ | |
1478 | if (id[ATA_ID_FIELD_VALID] & (1 << 1)) { | |
1479 | pio_mask = id[ATA_ID_PIO_MODES] & 0x03; | |
1480 | pio_mask <<= 3; | |
1481 | pio_mask |= 0x7; | |
1482 | } else { | |
1483 | /* If word 64 isn't valid then Word 51 high byte holds | |
1484 | * the PIO timing number for the maximum. Turn it into | |
1485 | * a mask. | |
1486 | */ | |
7a0f1c8a | 1487 | u8 mode = (id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF; |
46767aeb | 1488 | if (mode < 5) /* Valid PIO range */ |
2dcb407e | 1489 | pio_mask = (2 << mode) - 1; |
46767aeb AC |
1490 | else |
1491 | pio_mask = 1; | |
cb95d562 TH |
1492 | |
1493 | /* But wait.. there's more. Design your standards by | |
1494 | * committee and you too can get a free iordy field to | |
1495 | * process. However its the speeds not the modes that | |
1496 | * are supported... Note drivers using the timing API | |
1497 | * will get this right anyway | |
1498 | */ | |
1499 | } | |
1500 | ||
1501 | mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07; | |
fb21f0d0 | 1502 | |
b352e57d AC |
1503 | if (ata_id_is_cfa(id)) { |
1504 | /* | |
1505 | * Process compact flash extended modes | |
1506 | */ | |
62afe5d7 SS |
1507 | int pio = (id[ATA_ID_CFA_MODES] >> 0) & 0x7; |
1508 | int dma = (id[ATA_ID_CFA_MODES] >> 3) & 0x7; | |
b352e57d AC |
1509 | |
1510 | if (pio) | |
1511 | pio_mask |= (1 << 5); | |
1512 | if (pio > 1) | |
1513 | pio_mask |= (1 << 6); | |
1514 | if (dma) | |
1515 | mwdma_mask |= (1 << 3); | |
1516 | if (dma > 1) | |
1517 | mwdma_mask |= (1 << 4); | |
1518 | } | |
1519 | ||
fb21f0d0 TH |
1520 | udma_mask = 0; |
1521 | if (id[ATA_ID_FIELD_VALID] & (1 << 2)) | |
1522 | udma_mask = id[ATA_ID_UDMA_MODES] & 0xff; | |
cb95d562 TH |
1523 | |
1524 | return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); | |
1525 | } | |
1526 | ||
7102d230 | 1527 | static void ata_qc_complete_internal(struct ata_queued_cmd *qc) |
a2a7a662 | 1528 | { |
77853bf2 | 1529 | struct completion *waiting = qc->private_data; |
a2a7a662 | 1530 | |
a2a7a662 | 1531 | complete(waiting); |
a2a7a662 TH |
1532 | } |
1533 | ||
1534 | /** | |
2432697b | 1535 | * ata_exec_internal_sg - execute libata internal command |
a2a7a662 TH |
1536 | * @dev: Device to which the command is sent |
1537 | * @tf: Taskfile registers for the command and the result | |
d69cf37d | 1538 | * @cdb: CDB for packet command |
e227867f | 1539 | * @dma_dir: Data transfer direction of the command |
5c1ad8b3 | 1540 | * @sgl: sg list for the data buffer of the command |
2432697b | 1541 | * @n_elem: Number of sg entries |
2b789108 | 1542 | * @timeout: Timeout in msecs (0 for default) |
a2a7a662 TH |
1543 | * |
1544 | * Executes libata internal command with timeout. @tf contains | |
1545 | * command on entry and result on return. Timeout and error | |
1546 | * conditions are reported via return value. No recovery action | |
1547 | * is taken after a command times out. It's caller's duty to | |
1548 | * clean up after timeout. | |
1549 | * | |
1550 | * LOCKING: | |
1551 | * None. Should be called with kernel context, might sleep. | |
551e8889 TH |
1552 | * |
1553 | * RETURNS: | |
1554 | * Zero on success, AC_ERR_* mask on failure | |
a2a7a662 | 1555 | */ |
2432697b TH |
1556 | unsigned ata_exec_internal_sg(struct ata_device *dev, |
1557 | struct ata_taskfile *tf, const u8 *cdb, | |
87260216 | 1558 | int dma_dir, struct scatterlist *sgl, |
2b789108 | 1559 | unsigned int n_elem, unsigned long timeout) |
a2a7a662 | 1560 | { |
9af5c9c9 TH |
1561 | struct ata_link *link = dev->link; |
1562 | struct ata_port *ap = link->ap; | |
a2a7a662 | 1563 | u8 command = tf->command; |
87fbc5a0 | 1564 | int auto_timeout = 0; |
a2a7a662 | 1565 | struct ata_queued_cmd *qc; |
2ab7db1f | 1566 | unsigned int tag, preempted_tag; |
dedaf2b0 | 1567 | u32 preempted_sactive, preempted_qc_active; |
da917d69 | 1568 | int preempted_nr_active_links; |
60be6b9a | 1569 | DECLARE_COMPLETION_ONSTACK(wait); |
a2a7a662 | 1570 | unsigned long flags; |
77853bf2 | 1571 | unsigned int err_mask; |
d95a717f | 1572 | int rc; |
a2a7a662 | 1573 | |
ba6a1308 | 1574 | spin_lock_irqsave(ap->lock, flags); |
a2a7a662 | 1575 | |
e3180499 | 1576 | /* no internal command while frozen */ |
b51e9e5d | 1577 | if (ap->pflags & ATA_PFLAG_FROZEN) { |
ba6a1308 | 1578 | spin_unlock_irqrestore(ap->lock, flags); |
e3180499 TH |
1579 | return AC_ERR_SYSTEM; |
1580 | } | |
1581 | ||
2ab7db1f | 1582 | /* initialize internal qc */ |
a2a7a662 | 1583 | |
2ab7db1f TH |
1584 | /* XXX: Tag 0 is used for drivers with legacy EH as some |
1585 | * drivers choke if any other tag is given. This breaks | |
1586 | * ata_tag_internal() test for those drivers. Don't use new | |
1587 | * EH stuff without converting to it. | |
1588 | */ | |
1589 | if (ap->ops->error_handler) | |
1590 | tag = ATA_TAG_INTERNAL; | |
1591 | else | |
1592 | tag = 0; | |
1593 | ||
f69499f4 | 1594 | qc = __ata_qc_from_tag(ap, tag); |
2ab7db1f TH |
1595 | |
1596 | qc->tag = tag; | |
1597 | qc->scsicmd = NULL; | |
1598 | qc->ap = ap; | |
1599 | qc->dev = dev; | |
1600 | ata_qc_reinit(qc); | |
1601 | ||
9af5c9c9 TH |
1602 | preempted_tag = link->active_tag; |
1603 | preempted_sactive = link->sactive; | |
dedaf2b0 | 1604 | preempted_qc_active = ap->qc_active; |
da917d69 | 1605 | preempted_nr_active_links = ap->nr_active_links; |
9af5c9c9 TH |
1606 | link->active_tag = ATA_TAG_POISON; |
1607 | link->sactive = 0; | |
dedaf2b0 | 1608 | ap->qc_active = 0; |
da917d69 | 1609 | ap->nr_active_links = 0; |
2ab7db1f TH |
1610 | |
1611 | /* prepare & issue qc */ | |
a2a7a662 | 1612 | qc->tf = *tf; |
d69cf37d TH |
1613 | if (cdb) |
1614 | memcpy(qc->cdb, cdb, ATAPI_CDB_LEN); | |
e771451c VP |
1615 | |
1616 | /* some SATA bridges need us to indicate data xfer direction */ | |
1617 | if (tf->protocol == ATAPI_PROT_DMA && (dev->flags & ATA_DFLAG_DMADIR) && | |
1618 | dma_dir == DMA_FROM_DEVICE) | |
1619 | qc->tf.feature |= ATAPI_DMADIR; | |
1620 | ||
e61e0672 | 1621 | qc->flags |= ATA_QCFLAG_RESULT_TF; |
a2a7a662 TH |
1622 | qc->dma_dir = dma_dir; |
1623 | if (dma_dir != DMA_NONE) { | |
2432697b | 1624 | unsigned int i, buflen = 0; |
87260216 | 1625 | struct scatterlist *sg; |
2432697b | 1626 | |
87260216 JA |
1627 | for_each_sg(sgl, sg, n_elem, i) |
1628 | buflen += sg->length; | |
2432697b | 1629 | |
87260216 | 1630 | ata_sg_init(qc, sgl, n_elem); |
49c80429 | 1631 | qc->nbytes = buflen; |
a2a7a662 TH |
1632 | } |
1633 | ||
77853bf2 | 1634 | qc->private_data = &wait; |
a2a7a662 TH |
1635 | qc->complete_fn = ata_qc_complete_internal; |
1636 | ||
8e0e694a | 1637 | ata_qc_issue(qc); |
a2a7a662 | 1638 | |
ba6a1308 | 1639 | spin_unlock_irqrestore(ap->lock, flags); |
a2a7a662 | 1640 | |
87fbc5a0 TH |
1641 | if (!timeout) { |
1642 | if (ata_probe_timeout) | |
1643 | timeout = ata_probe_timeout * 1000; | |
1644 | else { | |
1645 | timeout = ata_internal_cmd_timeout(dev, command); | |
1646 | auto_timeout = 1; | |
1647 | } | |
1648 | } | |
2b789108 | 1649 | |
c0c362b6 TH |
1650 | if (ap->ops->error_handler) |
1651 | ata_eh_release(ap); | |
1652 | ||
2b789108 | 1653 | rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout)); |
d95a717f | 1654 | |
c0c362b6 TH |
1655 | if (ap->ops->error_handler) |
1656 | ata_eh_acquire(ap); | |
1657 | ||
c429137a | 1658 | ata_sff_flush_pio_task(ap); |
41ade50c | 1659 | |
d95a717f | 1660 | if (!rc) { |
ba6a1308 | 1661 | spin_lock_irqsave(ap->lock, flags); |
a2a7a662 TH |
1662 | |
1663 | /* We're racing with irq here. If we lose, the | |
1664 | * following test prevents us from completing the qc | |
d95a717f TH |
1665 | * twice. If we win, the port is frozen and will be |
1666 | * cleaned up by ->post_internal_cmd(). | |
a2a7a662 | 1667 | */ |
77853bf2 | 1668 | if (qc->flags & ATA_QCFLAG_ACTIVE) { |
d95a717f TH |
1669 | qc->err_mask |= AC_ERR_TIMEOUT; |
1670 | ||
1671 | if (ap->ops->error_handler) | |
1672 | ata_port_freeze(ap); | |
1673 | else | |
1674 | ata_qc_complete(qc); | |
f15a1daf | 1675 | |
0dd4b21f | 1676 | if (ata_msg_warn(ap)) |
a9a79dfe JP |
1677 | ata_dev_warn(dev, "qc timeout (cmd 0x%x)\n", |
1678 | command); | |
a2a7a662 TH |
1679 | } |
1680 | ||
ba6a1308 | 1681 | spin_unlock_irqrestore(ap->lock, flags); |
a2a7a662 TH |
1682 | } |
1683 | ||
d95a717f TH |
1684 | /* do post_internal_cmd */ |
1685 | if (ap->ops->post_internal_cmd) | |
1686 | ap->ops->post_internal_cmd(qc); | |
1687 | ||
a51d644a TH |
1688 | /* perform minimal error analysis */ |
1689 | if (qc->flags & ATA_QCFLAG_FAILED) { | |
1690 | if (qc->result_tf.command & (ATA_ERR | ATA_DF)) | |
1691 | qc->err_mask |= AC_ERR_DEV; | |
1692 | ||
1693 | if (!qc->err_mask) | |
1694 | qc->err_mask |= AC_ERR_OTHER; | |
1695 | ||
1696 | if (qc->err_mask & ~AC_ERR_OTHER) | |
1697 | qc->err_mask &= ~AC_ERR_OTHER; | |
d95a717f TH |
1698 | } |
1699 | ||
15869303 | 1700 | /* finish up */ |
ba6a1308 | 1701 | spin_lock_irqsave(ap->lock, flags); |
15869303 | 1702 | |
e61e0672 | 1703 | *tf = qc->result_tf; |
77853bf2 TH |
1704 | err_mask = qc->err_mask; |
1705 | ||
1706 | ata_qc_free(qc); | |
9af5c9c9 TH |
1707 | link->active_tag = preempted_tag; |
1708 | link->sactive = preempted_sactive; | |
dedaf2b0 | 1709 | ap->qc_active = preempted_qc_active; |
da917d69 | 1710 | ap->nr_active_links = preempted_nr_active_links; |
77853bf2 | 1711 | |
ba6a1308 | 1712 | spin_unlock_irqrestore(ap->lock, flags); |
15869303 | 1713 | |
87fbc5a0 TH |
1714 | if ((err_mask & AC_ERR_TIMEOUT) && auto_timeout) |
1715 | ata_internal_cmd_timed_out(dev, command); | |
1716 | ||
77853bf2 | 1717 | return err_mask; |
a2a7a662 TH |
1718 | } |
1719 | ||
2432697b | 1720 | /** |
33480a0e | 1721 | * ata_exec_internal - execute libata internal command |
2432697b TH |
1722 | * @dev: Device to which the command is sent |
1723 | * @tf: Taskfile registers for the command and the result | |
1724 | * @cdb: CDB for packet command | |
e227867f | 1725 | * @dma_dir: Data transfer direction of the command |
2432697b TH |
1726 | * @buf: Data buffer of the command |
1727 | * @buflen: Length of data buffer | |
2b789108 | 1728 | * @timeout: Timeout in msecs (0 for default) |
2432697b TH |
1729 | * |
1730 | * Wrapper around ata_exec_internal_sg() which takes simple | |
1731 | * buffer instead of sg list. | |
1732 | * | |
1733 | * LOCKING: | |
1734 | * None. Should be called with kernel context, might sleep. | |
1735 | * | |
1736 | * RETURNS: | |
1737 | * Zero on success, AC_ERR_* mask on failure | |
1738 | */ | |
1739 | unsigned ata_exec_internal(struct ata_device *dev, | |
1740 | struct ata_taskfile *tf, const u8 *cdb, | |
2b789108 TH |
1741 | int dma_dir, void *buf, unsigned int buflen, |
1742 | unsigned long timeout) | |
2432697b | 1743 | { |
33480a0e TH |
1744 | struct scatterlist *psg = NULL, sg; |
1745 | unsigned int n_elem = 0; | |
2432697b | 1746 | |
33480a0e TH |
1747 | if (dma_dir != DMA_NONE) { |
1748 | WARN_ON(!buf); | |
1749 | sg_init_one(&sg, buf, buflen); | |
1750 | psg = &sg; | |
1751 | n_elem++; | |
1752 | } | |
2432697b | 1753 | |
2b789108 TH |
1754 | return ata_exec_internal_sg(dev, tf, cdb, dma_dir, psg, n_elem, |
1755 | timeout); | |
2432697b TH |
1756 | } |
1757 | ||
1bc4ccff AC |
1758 | /** |
1759 | * ata_pio_need_iordy - check if iordy needed | |
1760 | * @adev: ATA device | |
1761 | * | |
1762 | * Check if the current speed of the device requires IORDY. Used | |
1763 | * by various controllers for chip configuration. | |
1764 | */ | |
1bc4ccff AC |
1765 | unsigned int ata_pio_need_iordy(const struct ata_device *adev) |
1766 | { | |
0d9e6659 TH |
1767 | /* Don't set IORDY if we're preparing for reset. IORDY may |
1768 | * lead to controller lock up on certain controllers if the | |
1769 | * port is not occupied. See bko#11703 for details. | |
1770 | */ | |
1771 | if (adev->link->ap->pflags & ATA_PFLAG_RESETTING) | |
1772 | return 0; | |
1773 | /* Controller doesn't support IORDY. Probably a pointless | |
1774 | * check as the caller should know this. | |
1775 | */ | |
9af5c9c9 | 1776 | if (adev->link->ap->flags & ATA_FLAG_NO_IORDY) |
1bc4ccff | 1777 | return 0; |
5c18c4d2 DD |
1778 | /* CF spec. r4.1 Table 22 says no iordy on PIO5 and PIO6. */ |
1779 | if (ata_id_is_cfa(adev->id) | |
1780 | && (adev->pio_mode == XFER_PIO_5 || adev->pio_mode == XFER_PIO_6)) | |
1781 | return 0; | |
432729f0 AC |
1782 | /* PIO3 and higher it is mandatory */ |
1783 | if (adev->pio_mode > XFER_PIO_2) | |
1784 | return 1; | |
1785 | /* We turn it on when possible */ | |
1786 | if (ata_id_has_iordy(adev->id)) | |
1bc4ccff | 1787 | return 1; |
432729f0 AC |
1788 | return 0; |
1789 | } | |
2e9edbf8 | 1790 | |
432729f0 AC |
1791 | /** |
1792 | * ata_pio_mask_no_iordy - Return the non IORDY mask | |
1793 | * @adev: ATA device | |
1794 | * | |
1795 | * Compute the highest mode possible if we are not using iordy. Return | |
1796 | * -1 if no iordy mode is available. | |
1797 | */ | |
432729f0 AC |
1798 | static u32 ata_pio_mask_no_iordy(const struct ata_device *adev) |
1799 | { | |
1bc4ccff | 1800 | /* If we have no drive specific rule, then PIO 2 is non IORDY */ |
1bc4ccff | 1801 | if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */ |
432729f0 | 1802 | u16 pio = adev->id[ATA_ID_EIDE_PIO]; |
1bc4ccff AC |
1803 | /* Is the speed faster than the drive allows non IORDY ? */ |
1804 | if (pio) { | |
1805 | /* This is cycle times not frequency - watch the logic! */ | |
1806 | if (pio > 240) /* PIO2 is 240nS per cycle */ | |
432729f0 AC |
1807 | return 3 << ATA_SHIFT_PIO; |
1808 | return 7 << ATA_SHIFT_PIO; | |
1bc4ccff AC |
1809 | } |
1810 | } | |
432729f0 | 1811 | return 3 << ATA_SHIFT_PIO; |
1bc4ccff AC |
1812 | } |
1813 | ||
963e4975 AC |
1814 | /** |
1815 | * ata_do_dev_read_id - default ID read method | |
1816 | * @dev: device | |
1817 | * @tf: proposed taskfile | |
1818 | * @id: data buffer | |
1819 | * | |
1820 | * Issue the identify taskfile and hand back the buffer containing | |
1821 | * identify data. For some RAID controllers and for pre ATA devices | |
1822 | * this function is wrapped or replaced by the driver | |
1823 | */ | |
1824 | unsigned int ata_do_dev_read_id(struct ata_device *dev, | |
1825 | struct ata_taskfile *tf, u16 *id) | |
1826 | { | |
1827 | return ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE, | |
1828 | id, sizeof(id[0]) * ATA_ID_WORDS, 0); | |
1829 | } | |
1830 | ||
1da177e4 | 1831 | /** |
49016aca | 1832 | * ata_dev_read_id - Read ID data from the specified device |
49016aca TH |
1833 | * @dev: target device |
1834 | * @p_class: pointer to class of the target device (may be changed) | |
bff04647 | 1835 | * @flags: ATA_READID_* flags |
fe635c7e | 1836 | * @id: buffer to read IDENTIFY data into |
1da177e4 | 1837 | * |
49016aca TH |
1838 | * Read ID data from the specified device. ATA_CMD_ID_ATA is |
1839 | * performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI | |
aec5c3c1 TH |
1840 | * devices. This function also issues ATA_CMD_INIT_DEV_PARAMS |
1841 | * for pre-ATA4 drives. | |
1da177e4 | 1842 | * |
50a99018 | 1843 | * FIXME: ATA_CMD_ID_ATA is optional for early drives and right |
2dcb407e | 1844 | * now we abort if we hit that case. |
50a99018 | 1845 | * |
1da177e4 | 1846 | * LOCKING: |
49016aca TH |
1847 | * Kernel thread context (may sleep) |
1848 | * | |
1849 | * RETURNS: | |
1850 | * 0 on success, -errno otherwise. | |
1da177e4 | 1851 | */ |
a9beec95 | 1852 | int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, |
bff04647 | 1853 | unsigned int flags, u16 *id) |
1da177e4 | 1854 | { |
9af5c9c9 | 1855 | struct ata_port *ap = dev->link->ap; |
49016aca | 1856 | unsigned int class = *p_class; |
a0123703 | 1857 | struct ata_taskfile tf; |
49016aca TH |
1858 | unsigned int err_mask = 0; |
1859 | const char *reason; | |
79b42bab | 1860 | bool is_semb = class == ATA_DEV_SEMB; |
54936f8b | 1861 | int may_fallback = 1, tried_spinup = 0; |
49016aca | 1862 | int rc; |
1da177e4 | 1863 | |
0dd4b21f | 1864 | if (ata_msg_ctl(ap)) |
a9a79dfe | 1865 | ata_dev_dbg(dev, "%s: ENTER\n", __func__); |
1da177e4 | 1866 | |
963e4975 | 1867 | retry: |
3373efd8 | 1868 | ata_tf_init(dev, &tf); |
a0123703 | 1869 | |
49016aca | 1870 | switch (class) { |
79b42bab TH |
1871 | case ATA_DEV_SEMB: |
1872 | class = ATA_DEV_ATA; /* some hard drives report SEMB sig */ | |
49016aca | 1873 | case ATA_DEV_ATA: |
9162c657 | 1874 | case ATA_DEV_ZAC: |
a0123703 | 1875 | tf.command = ATA_CMD_ID_ATA; |
49016aca TH |
1876 | break; |
1877 | case ATA_DEV_ATAPI: | |
a0123703 | 1878 | tf.command = ATA_CMD_ID_ATAPI; |
49016aca TH |
1879 | break; |
1880 | default: | |
1881 | rc = -ENODEV; | |
1882 | reason = "unsupported class"; | |
1883 | goto err_out; | |
1da177e4 LT |
1884 | } |
1885 | ||
a0123703 | 1886 | tf.protocol = ATA_PROT_PIO; |
81afe893 TH |
1887 | |
1888 | /* Some devices choke if TF registers contain garbage. Make | |
1889 | * sure those are properly initialized. | |
1890 | */ | |
1891 | tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; | |
1892 | ||
1893 | /* Device presence detection is unreliable on some | |
1894 | * controllers. Always poll IDENTIFY if available. | |
1895 | */ | |
1896 | tf.flags |= ATA_TFLAG_POLLING; | |
1da177e4 | 1897 | |
963e4975 AC |
1898 | if (ap->ops->read_id) |
1899 | err_mask = ap->ops->read_id(dev, &tf, id); | |
1900 | else | |
1901 | err_mask = ata_do_dev_read_id(dev, &tf, id); | |
1902 | ||
a0123703 | 1903 | if (err_mask) { |
800b3996 | 1904 | if (err_mask & AC_ERR_NODEV_HINT) { |
a9a79dfe | 1905 | ata_dev_dbg(dev, "NODEV after polling detection\n"); |
55a8e2c8 TH |
1906 | return -ENOENT; |
1907 | } | |
1908 | ||
79b42bab | 1909 | if (is_semb) { |
a9a79dfe JP |
1910 | ata_dev_info(dev, |
1911 | "IDENTIFY failed on device w/ SEMB sig, disabled\n"); | |
79b42bab TH |
1912 | /* SEMB is not supported yet */ |
1913 | *p_class = ATA_DEV_SEMB_UNSUP; | |
1914 | return 0; | |
1915 | } | |
1916 | ||
1ffc151f TH |
1917 | if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) { |
1918 | /* Device or controller might have reported | |
1919 | * the wrong device class. Give a shot at the | |
1920 | * other IDENTIFY if the current one is | |
1921 | * aborted by the device. | |
1922 | */ | |
1923 | if (may_fallback) { | |
1924 | may_fallback = 0; | |
1925 | ||
1926 | if (class == ATA_DEV_ATA) | |
1927 | class = ATA_DEV_ATAPI; | |
1928 | else | |
1929 | class = ATA_DEV_ATA; | |
1930 | goto retry; | |
1931 | } | |
1932 | ||
1933 | /* Control reaches here iff the device aborted | |
1934 | * both flavors of IDENTIFYs which happens | |
1935 | * sometimes with phantom devices. | |
1936 | */ | |
a9a79dfe JP |
1937 | ata_dev_dbg(dev, |
1938 | "both IDENTIFYs aborted, assuming NODEV\n"); | |
1ffc151f | 1939 | return -ENOENT; |
54936f8b TH |
1940 | } |
1941 | ||
49016aca TH |
1942 | rc = -EIO; |
1943 | reason = "I/O error"; | |
1da177e4 LT |
1944 | goto err_out; |
1945 | } | |
1946 | ||
43c9c591 | 1947 | if (dev->horkage & ATA_HORKAGE_DUMP_ID) { |
a9a79dfe JP |
1948 | ata_dev_dbg(dev, "dumping IDENTIFY data, " |
1949 | "class=%d may_fallback=%d tried_spinup=%d\n", | |
1950 | class, may_fallback, tried_spinup); | |
43c9c591 TH |
1951 | print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, |
1952 | 16, 2, id, ATA_ID_WORDS * sizeof(*id), true); | |
1953 | } | |
1954 | ||
54936f8b TH |
1955 | /* Falling back doesn't make sense if ID data was read |
1956 | * successfully at least once. | |
1957 | */ | |
1958 | may_fallback = 0; | |
1959 | ||
49016aca | 1960 | swap_buf_le16(id, ATA_ID_WORDS); |
1da177e4 | 1961 | |
49016aca | 1962 | /* sanity check */ |
a4f5749b | 1963 | rc = -EINVAL; |
6070068b | 1964 | reason = "device reports invalid type"; |
a4f5749b | 1965 | |
9162c657 | 1966 | if (class == ATA_DEV_ATA || class == ATA_DEV_ZAC) { |
a4f5749b TH |
1967 | if (!ata_id_is_ata(id) && !ata_id_is_cfa(id)) |
1968 | goto err_out; | |
db63a4c8 AW |
1969 | if (ap->host->flags & ATA_HOST_IGNORE_ATA && |
1970 | ata_id_is_ata(id)) { | |
1971 | ata_dev_dbg(dev, | |
1972 | "host indicates ignore ATA devices, ignored\n"); | |
1973 | return -ENOENT; | |
1974 | } | |
a4f5749b TH |
1975 | } else { |
1976 | if (ata_id_is_ata(id)) | |
1977 | goto err_out; | |
49016aca TH |
1978 | } |
1979 | ||
169439c2 ML |
1980 | if (!tried_spinup && (id[2] == 0x37c8 || id[2] == 0x738c)) { |
1981 | tried_spinup = 1; | |
1982 | /* | |
1983 | * Drive powered-up in standby mode, and requires a specific | |
1984 | * SET_FEATURES spin-up subcommand before it will accept | |
1985 | * anything other than the original IDENTIFY command. | |
1986 | */ | |
218f3d30 | 1987 | err_mask = ata_dev_set_feature(dev, SETFEATURES_SPINUP, 0); |
fb0582f9 | 1988 | if (err_mask && id[2] != 0x738c) { |
169439c2 ML |
1989 | rc = -EIO; |
1990 | reason = "SPINUP failed"; | |
1991 | goto err_out; | |
1992 | } | |
1993 | /* | |
1994 | * If the drive initially returned incomplete IDENTIFY info, | |
1995 | * we now must reissue the IDENTIFY command. | |
1996 | */ | |
1997 | if (id[2] == 0x37c8) | |
1998 | goto retry; | |
1999 | } | |
2000 | ||
9162c657 HR |
2001 | if ((flags & ATA_READID_POSTRESET) && |
2002 | (class == ATA_DEV_ATA || class == ATA_DEV_ZAC)) { | |
49016aca TH |
2003 | /* |
2004 | * The exact sequence expected by certain pre-ATA4 drives is: | |
2005 | * SRST RESET | |
50a99018 AC |
2006 | * IDENTIFY (optional in early ATA) |
2007 | * INITIALIZE DEVICE PARAMETERS (later IDE and ATA) | |
49016aca TH |
2008 | * anything else.. |
2009 | * Some drives were very specific about that exact sequence. | |
50a99018 AC |
2010 | * |
2011 | * Note that ATA4 says lba is mandatory so the second check | |
c9404c9c | 2012 | * should never trigger. |
49016aca TH |
2013 | */ |
2014 | if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) { | |
3373efd8 | 2015 | err_mask = ata_dev_init_params(dev, id[3], id[6]); |
49016aca TH |
2016 | if (err_mask) { |
2017 | rc = -EIO; | |
2018 | reason = "INIT_DEV_PARAMS failed"; | |
2019 | goto err_out; | |
2020 | } | |
2021 | ||
2022 | /* current CHS translation info (id[53-58]) might be | |
2023 | * changed. reread the identify device info. | |
2024 | */ | |
bff04647 | 2025 | flags &= ~ATA_READID_POSTRESET; |
49016aca TH |
2026 | goto retry; |
2027 | } | |
2028 | } | |
2029 | ||
2030 | *p_class = class; | |
fe635c7e | 2031 | |
49016aca TH |
2032 | return 0; |
2033 | ||
2034 | err_out: | |
88574551 | 2035 | if (ata_msg_warn(ap)) |
a9a79dfe JP |
2036 | ata_dev_warn(dev, "failed to IDENTIFY (%s, err_mask=0x%x)\n", |
2037 | reason, err_mask); | |
49016aca TH |
2038 | return rc; |
2039 | } | |
2040 | ||
9062712f TH |
2041 | static int ata_do_link_spd_horkage(struct ata_device *dev) |
2042 | { | |
2043 | struct ata_link *plink = ata_dev_phys_link(dev); | |
2044 | u32 target, target_limit; | |
2045 | ||
2046 | if (!sata_scr_valid(plink)) | |
2047 | return 0; | |
2048 | ||
2049 | if (dev->horkage & ATA_HORKAGE_1_5_GBPS) | |
2050 | target = 1; | |
2051 | else | |
2052 | return 0; | |
2053 | ||
2054 | target_limit = (1 << target) - 1; | |
2055 | ||
2056 | /* if already on stricter limit, no need to push further */ | |
2057 | if (plink->sata_spd_limit <= target_limit) | |
2058 | return 0; | |
2059 | ||
2060 | plink->sata_spd_limit = target_limit; | |
2061 | ||
2062 | /* Request another EH round by returning -EAGAIN if link is | |
2063 | * going faster than the target speed. Forward progress is | |
2064 | * guaranteed by setting sata_spd_limit to target_limit above. | |
2065 | */ | |
2066 | if (plink->sata_spd > target) { | |
a9a79dfe JP |
2067 | ata_dev_info(dev, "applying link speed limit horkage to %s\n", |
2068 | sata_spd_string(target)); | |
9062712f TH |
2069 | return -EAGAIN; |
2070 | } | |
2071 | return 0; | |
2072 | } | |
2073 | ||
3373efd8 | 2074 | static inline u8 ata_dev_knobble(struct ata_device *dev) |
4b2f3ede | 2075 | { |
9af5c9c9 | 2076 | struct ata_port *ap = dev->link->ap; |
9ce8e307 JA |
2077 | |
2078 | if (ata_dev_blacklisted(dev) & ATA_HORKAGE_BRIDGE_OK) | |
2079 | return 0; | |
2080 | ||
9af5c9c9 | 2081 | return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); |
4b2f3ede TH |
2082 | } |
2083 | ||
5a233551 HR |
2084 | static void ata_dev_config_ncq_send_recv(struct ata_device *dev) |
2085 | { | |
2086 | struct ata_port *ap = dev->link->ap; | |
2087 | unsigned int err_mask; | |
fe5af0cc HR |
2088 | int log_index = ATA_LOG_NCQ_SEND_RECV * 2; |
2089 | u16 log_pages; | |
5a233551 | 2090 | |
fe5af0cc HR |
2091 | err_mask = ata_read_log_page(dev, ATA_LOG_DIRECTORY, |
2092 | 0, ap->sector_buf, 1); | |
2093 | if (err_mask) { | |
2094 | ata_dev_dbg(dev, | |
2095 | "failed to get Log Directory Emask 0x%x\n", | |
2096 | err_mask); | |
2097 | return; | |
2098 | } | |
2099 | log_pages = get_unaligned_le16(&ap->sector_buf[log_index]); | |
2100 | if (!log_pages) { | |
2101 | ata_dev_warn(dev, | |
2102 | "NCQ Send/Recv Log not supported\n"); | |
2103 | return; | |
2104 | } | |
5a233551 HR |
2105 | err_mask = ata_read_log_page(dev, ATA_LOG_NCQ_SEND_RECV, |
2106 | 0, ap->sector_buf, 1); | |
2107 | if (err_mask) { | |
2108 | ata_dev_dbg(dev, | |
2109 | "failed to get NCQ Send/Recv Log Emask 0x%x\n", | |
2110 | err_mask); | |
2111 | } else { | |
2112 | u8 *cmds = dev->ncq_send_recv_cmds; | |
2113 | ||
2114 | dev->flags |= ATA_DFLAG_NCQ_SEND_RECV; | |
2115 | memcpy(cmds, ap->sector_buf, ATA_LOG_NCQ_SEND_RECV_SIZE); | |
2116 | ||
2117 | if (dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM) { | |
2118 | ata_dev_dbg(dev, "disabling queued TRIM support\n"); | |
2119 | cmds[ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET] &= | |
2120 | ~ATA_LOG_NCQ_SEND_RECV_DSM_TRIM; | |
2121 | } | |
2122 | } | |
2123 | } | |
2124 | ||
284b3b77 HR |
2125 | static void ata_dev_config_ncq_non_data(struct ata_device *dev) |
2126 | { | |
2127 | struct ata_port *ap = dev->link->ap; | |
2128 | unsigned int err_mask; | |
2129 | int log_index = ATA_LOG_NCQ_NON_DATA * 2; | |
2130 | u16 log_pages; | |
2131 | ||
2132 | err_mask = ata_read_log_page(dev, ATA_LOG_DIRECTORY, | |
2133 | 0, ap->sector_buf, 1); | |
2134 | if (err_mask) { | |
2135 | ata_dev_dbg(dev, | |
2136 | "failed to get Log Directory Emask 0x%x\n", | |
2137 | err_mask); | |
2138 | return; | |
2139 | } | |
2140 | log_pages = get_unaligned_le16(&ap->sector_buf[log_index]); | |
2141 | if (!log_pages) { | |
2142 | ata_dev_warn(dev, | |
2143 | "NCQ Send/Recv Log not supported\n"); | |
2144 | return; | |
2145 | } | |
2146 | err_mask = ata_read_log_page(dev, ATA_LOG_NCQ_NON_DATA, | |
2147 | 0, ap->sector_buf, 1); | |
2148 | if (err_mask) { | |
2149 | ata_dev_dbg(dev, | |
2150 | "failed to get NCQ Non-Data Log Emask 0x%x\n", | |
2151 | err_mask); | |
2152 | } else { | |
2153 | u8 *cmds = dev->ncq_non_data_cmds; | |
2154 | ||
2155 | memcpy(cmds, ap->sector_buf, ATA_LOG_NCQ_NON_DATA_SIZE); | |
2156 | } | |
2157 | } | |
2158 | ||
388539f3 | 2159 | static int ata_dev_config_ncq(struct ata_device *dev, |
a6e6ce8e TH |
2160 | char *desc, size_t desc_sz) |
2161 | { | |
9af5c9c9 | 2162 | struct ata_port *ap = dev->link->ap; |
a6e6ce8e | 2163 | int hdepth = 0, ddepth = ata_id_queue_depth(dev->id); |
388539f3 SL |
2164 | unsigned int err_mask; |
2165 | char *aa_desc = ""; | |
a6e6ce8e TH |
2166 | |
2167 | if (!ata_id_has_ncq(dev->id)) { | |
2168 | desc[0] = '\0'; | |
388539f3 | 2169 | return 0; |
a6e6ce8e | 2170 | } |
75683fe7 | 2171 | if (dev->horkage & ATA_HORKAGE_NONCQ) { |
6919a0a6 | 2172 | snprintf(desc, desc_sz, "NCQ (not used)"); |
388539f3 | 2173 | return 0; |
6919a0a6 | 2174 | } |
a6e6ce8e | 2175 | if (ap->flags & ATA_FLAG_NCQ) { |
cca3974e | 2176 | hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE - 1); |
a6e6ce8e TH |
2177 | dev->flags |= ATA_DFLAG_NCQ; |
2178 | } | |
2179 | ||
388539f3 SL |
2180 | if (!(dev->horkage & ATA_HORKAGE_BROKEN_FPDMA_AA) && |
2181 | (ap->flags & ATA_FLAG_FPDMA_AA) && | |
2182 | ata_id_has_fpdma_aa(dev->id)) { | |
2183 | err_mask = ata_dev_set_feature(dev, SETFEATURES_SATA_ENABLE, | |
2184 | SATA_FPDMA_AA); | |
2185 | if (err_mask) { | |
a9a79dfe JP |
2186 | ata_dev_err(dev, |
2187 | "failed to enable AA (error_mask=0x%x)\n", | |
2188 | err_mask); | |
388539f3 SL |
2189 | if (err_mask != AC_ERR_DEV) { |
2190 | dev->horkage |= ATA_HORKAGE_BROKEN_FPDMA_AA; | |
2191 | return -EIO; | |
2192 | } | |
2193 | } else | |
2194 | aa_desc = ", AA"; | |
2195 | } | |
2196 | ||
a6e6ce8e | 2197 | if (hdepth >= ddepth) |
388539f3 | 2198 | snprintf(desc, desc_sz, "NCQ (depth %d)%s", ddepth, aa_desc); |
a6e6ce8e | 2199 | else |
388539f3 SL |
2200 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth, |
2201 | ddepth, aa_desc); | |
ed36911c | 2202 | |
284b3b77 HR |
2203 | if ((ap->flags & ATA_FLAG_FPDMA_AUX)) { |
2204 | if (ata_id_has_ncq_send_and_recv(dev->id)) | |
2205 | ata_dev_config_ncq_send_recv(dev); | |
2206 | if (ata_id_has_ncq_non_data(dev->id)) | |
2207 | ata_dev_config_ncq_non_data(dev); | |
2208 | } | |
f78dea06 | 2209 | |
388539f3 | 2210 | return 0; |
a6e6ce8e | 2211 | } |
f78dea06 | 2212 | |
e87fd28c HR |
2213 | static void ata_dev_config_sense_reporting(struct ata_device *dev) |
2214 | { | |
2215 | unsigned int err_mask; | |
2216 | ||
2217 | if (!ata_id_has_sense_reporting(dev->id)) | |
2218 | return; | |
2219 | ||
2220 | if (ata_id_sense_reporting_enabled(dev->id)) | |
2221 | return; | |
2222 | ||
2223 | err_mask = ata_dev_set_feature(dev, SETFEATURE_SENSE_DATA, 0x1); | |
2224 | if (err_mask) { | |
2225 | ata_dev_dbg(dev, | |
2226 | "failed to enable Sense Data Reporting, Emask 0x%x\n", | |
2227 | err_mask); | |
2228 | } | |
2229 | } | |
2230 | ||
6d1003ae HR |
2231 | static void ata_dev_config_zac(struct ata_device *dev) |
2232 | { | |
2233 | struct ata_port *ap = dev->link->ap; | |
2234 | unsigned int err_mask; | |
2235 | u8 *identify_buf = ap->sector_buf; | |
2236 | int log_index = ATA_LOG_SATA_ID_DEV_DATA * 2, i, found = 0; | |
2237 | u16 log_pages; | |
2238 | ||
2239 | dev->zac_zones_optimal_open = U32_MAX; | |
2240 | dev->zac_zones_optimal_nonseq = U32_MAX; | |
2241 | dev->zac_zones_max_open = U32_MAX; | |
2242 | ||
2243 | /* | |
2244 | * Always set the 'ZAC' flag for Host-managed devices. | |
2245 | */ | |
2246 | if (dev->class == ATA_DEV_ZAC) | |
2247 | dev->flags |= ATA_DFLAG_ZAC; | |
2248 | else if (ata_id_zoned_cap(dev->id) == 0x01) | |
2249 | /* | |
2250 | * Check for host-aware devices. | |
2251 | */ | |
2252 | dev->flags |= ATA_DFLAG_ZAC; | |
2253 | ||
2254 | if (!(dev->flags & ATA_DFLAG_ZAC)) | |
2255 | return; | |
2256 | ||
2257 | /* | |
2258 | * Read Log Directory to figure out if IDENTIFY DEVICE log | |
2259 | * is supported. | |
2260 | */ | |
2261 | err_mask = ata_read_log_page(dev, ATA_LOG_DIRECTORY, | |
2262 | 0, ap->sector_buf, 1); | |
2263 | if (err_mask) { | |
2264 | ata_dev_info(dev, | |
2265 | "failed to get Log Directory Emask 0x%x\n", | |
2266 | err_mask); | |
2267 | return; | |
2268 | } | |
2269 | log_pages = get_unaligned_le16(&ap->sector_buf[log_index]); | |
2270 | if (log_pages == 0) { | |
2271 | ata_dev_warn(dev, | |
2272 | "ATA Identify Device Log not supported\n"); | |
2273 | return; | |
2274 | } | |
2275 | /* | |
2276 | * Read IDENTIFY DEVICE data log, page 0, to figure out | |
2277 | * if page 9 is supported. | |
2278 | */ | |
2279 | err_mask = ata_read_log_page(dev, ATA_LOG_SATA_ID_DEV_DATA, 0, | |
2280 | identify_buf, 1); | |
2281 | if (err_mask) { | |
2282 | ata_dev_info(dev, | |
2283 | "failed to get Device Identify Log Emask 0x%x\n", | |
2284 | err_mask); | |
2285 | return; | |
2286 | } | |
2287 | log_pages = identify_buf[8]; | |
2288 | for (i = 0; i < log_pages; i++) { | |
2289 | if (identify_buf[9 + i] == ATA_LOG_ZONED_INFORMATION) { | |
2290 | found++; | |
2291 | break; | |
ed36911c MC |
2292 | } |
2293 | } | |
6d1003ae HR |
2294 | if (!found) { |
2295 | ata_dev_warn(dev, | |
2296 | "ATA Zoned Information Log not supported\n"); | |
2297 | return; | |
2298 | } | |
ed36911c | 2299 | |
6d1003ae HR |
2300 | /* |
2301 | * Read IDENTIFY DEVICE data log, page 9 (Zoned-device information) | |
2302 | */ | |
2303 | err_mask = ata_read_log_page(dev, ATA_LOG_SATA_ID_DEV_DATA, | |
2304 | ATA_LOG_ZONED_INFORMATION, | |
2305 | identify_buf, 1); | |
2306 | if (!err_mask) { | |
2307 | u64 zoned_cap, opt_open, opt_nonseq, max_open; | |
2308 | ||
2309 | zoned_cap = get_unaligned_le64(&identify_buf[8]); | |
2310 | if ((zoned_cap >> 63)) | |
2311 | dev->zac_zoned_cap = (zoned_cap & 1); | |
2312 | opt_open = get_unaligned_le64(&identify_buf[24]); | |
2313 | if ((opt_open >> 63)) | |
2314 | dev->zac_zones_optimal_open = (u32)opt_open; | |
2315 | opt_nonseq = get_unaligned_le64(&identify_buf[32]); | |
2316 | if ((opt_nonseq >> 63)) | |
2317 | dev->zac_zones_optimal_nonseq = (u32)opt_nonseq; | |
2318 | max_open = get_unaligned_le64(&identify_buf[40]); | |
2319 | if ((max_open >> 63)) | |
2320 | dev->zac_zones_max_open = (u32)max_open; | |
2321 | } | |
a6e6ce8e TH |
2322 | } |
2323 | ||
49016aca | 2324 | /** |
ffeae418 | 2325 | * ata_dev_configure - Configure the specified ATA/ATAPI device |
ffeae418 TH |
2326 | * @dev: Target device to configure |
2327 | * | |
2328 | * Configure @dev according to @dev->id. Generic and low-level | |
2329 | * driver specific fixups are also applied. | |
49016aca TH |
2330 | * |
2331 | * LOCKING: | |
ffeae418 TH |
2332 | * Kernel thread context (may sleep) |
2333 | * | |
2334 | * RETURNS: | |
2335 | * 0 on success, -errno otherwise | |
49016aca | 2336 | */ |
efdaedc4 | 2337 | int ata_dev_configure(struct ata_device *dev) |
49016aca | 2338 | { |
9af5c9c9 TH |
2339 | struct ata_port *ap = dev->link->ap; |
2340 | struct ata_eh_context *ehc = &dev->link->eh_context; | |
6746544c | 2341 | int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; |
1148c3a7 | 2342 | const u16 *id = dev->id; |
7dc951ae | 2343 | unsigned long xfer_mask; |
65fe1f0f | 2344 | unsigned int err_mask; |
b352e57d | 2345 | char revbuf[7]; /* XYZ-99\0 */ |
3f64f565 EM |
2346 | char fwrevbuf[ATA_ID_FW_REV_LEN+1]; |
2347 | char modelbuf[ATA_ID_PROD_LEN+1]; | |
e6d902a3 | 2348 | int rc; |
49016aca | 2349 | |
0dd4b21f | 2350 | if (!ata_dev_enabled(dev) && ata_msg_info(ap)) { |
a9a79dfe | 2351 | ata_dev_info(dev, "%s: ENTER/EXIT -- nodev\n", __func__); |
ffeae418 | 2352 | return 0; |
49016aca TH |
2353 | } |
2354 | ||
0dd4b21f | 2355 | if (ata_msg_probe(ap)) |
a9a79dfe | 2356 | ata_dev_dbg(dev, "%s: ENTER\n", __func__); |
1da177e4 | 2357 | |
75683fe7 TH |
2358 | /* set horkage */ |
2359 | dev->horkage |= ata_dev_blacklisted(dev); | |
33267325 | 2360 | ata_force_horkage(dev); |
75683fe7 | 2361 | |
50af2fa1 | 2362 | if (dev->horkage & ATA_HORKAGE_DISABLE) { |
a9a79dfe | 2363 | ata_dev_info(dev, "unsupported device, disabling\n"); |
50af2fa1 TH |
2364 | ata_dev_disable(dev); |
2365 | return 0; | |
2366 | } | |
2367 | ||
2486fa56 TH |
2368 | if ((!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) && |
2369 | dev->class == ATA_DEV_ATAPI) { | |
a9a79dfe JP |
2370 | ata_dev_warn(dev, "WARNING: ATAPI is %s, device ignored\n", |
2371 | atapi_enabled ? "not supported with this driver" | |
2372 | : "disabled"); | |
2486fa56 TH |
2373 | ata_dev_disable(dev); |
2374 | return 0; | |
2375 | } | |
2376 | ||
9062712f TH |
2377 | rc = ata_do_link_spd_horkage(dev); |
2378 | if (rc) | |
2379 | return rc; | |
2380 | ||
ecd75ad5 TH |
2381 | /* some WD SATA-1 drives have issues with LPM, turn on NOLPM for them */ |
2382 | if ((dev->horkage & ATA_HORKAGE_WD_BROKEN_LPM) && | |
2383 | (id[ATA_ID_SATA_CAPABILITY] & 0xe) == 0x2) | |
2384 | dev->horkage |= ATA_HORKAGE_NOLPM; | |
2385 | ||
2386 | if (dev->horkage & ATA_HORKAGE_NOLPM) { | |
2387 | ata_dev_warn(dev, "LPM support broken, forcing max_power\n"); | |
2388 | dev->link->ap->target_lpm_policy = ATA_LPM_MAX_POWER; | |
2389 | } | |
2390 | ||
6746544c TH |
2391 | /* let ACPI work its magic */ |
2392 | rc = ata_acpi_on_devcfg(dev); | |
2393 | if (rc) | |
2394 | return rc; | |
08573a86 | 2395 | |
05027adc TH |
2396 | /* massage HPA, do it early as it might change IDENTIFY data */ |
2397 | rc = ata_hpa_resize(dev); | |
2398 | if (rc) | |
2399 | return rc; | |
2400 | ||
c39f5ebe | 2401 | /* print device capabilities */ |
0dd4b21f | 2402 | if (ata_msg_probe(ap)) |
a9a79dfe JP |
2403 | ata_dev_dbg(dev, |
2404 | "%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x " | |
2405 | "85:%04x 86:%04x 87:%04x 88:%04x\n", | |
2406 | __func__, | |
2407 | id[49], id[82], id[83], id[84], | |
2408 | id[85], id[86], id[87], id[88]); | |
c39f5ebe | 2409 | |
208a9933 | 2410 | /* initialize to-be-configured parameters */ |
ea1dd4e1 | 2411 | dev->flags &= ~ATA_DFLAG_CFG_MASK; |
208a9933 TH |
2412 | dev->max_sectors = 0; |
2413 | dev->cdb_len = 0; | |
2414 | dev->n_sectors = 0; | |
2415 | dev->cylinders = 0; | |
2416 | dev->heads = 0; | |
2417 | dev->sectors = 0; | |
e18086d6 | 2418 | dev->multi_count = 0; |
208a9933 | 2419 | |
1da177e4 LT |
2420 | /* |
2421 | * common ATA, ATAPI feature tests | |
2422 | */ | |
2423 | ||
ff8854b2 | 2424 | /* find max transfer mode; for printk only */ |
1148c3a7 | 2425 | xfer_mask = ata_id_xfermask(id); |
1da177e4 | 2426 | |
0dd4b21f BP |
2427 | if (ata_msg_probe(ap)) |
2428 | ata_dump_id(id); | |
1da177e4 | 2429 | |
ef143d57 AL |
2430 | /* SCSI only uses 4-char revisions, dump full 8 chars from ATA */ |
2431 | ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV, | |
2432 | sizeof(fwrevbuf)); | |
2433 | ||
2434 | ata_id_c_string(dev->id, modelbuf, ATA_ID_PROD, | |
2435 | sizeof(modelbuf)); | |
2436 | ||
1da177e4 | 2437 | /* ATA-specific feature tests */ |
9162c657 | 2438 | if (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ZAC) { |
b352e57d | 2439 | if (ata_id_is_cfa(id)) { |
62afe5d7 SS |
2440 | /* CPRM may make this media unusable */ |
2441 | if (id[ATA_ID_CFA_KEY_MGMT] & 1) | |
a9a79dfe JP |
2442 | ata_dev_warn(dev, |
2443 | "supports DRM functions and may not be fully accessible\n"); | |
b352e57d | 2444 | snprintf(revbuf, 7, "CFA"); |
ae8d4ee7 | 2445 | } else { |
2dcb407e | 2446 | snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id)); |
ae8d4ee7 AC |
2447 | /* Warn the user if the device has TPM extensions */ |
2448 | if (ata_id_has_tpm(id)) | |
a9a79dfe JP |
2449 | ata_dev_warn(dev, |
2450 | "supports DRM functions and may not be fully accessible\n"); | |
ae8d4ee7 | 2451 | } |
b352e57d | 2452 | |
1148c3a7 | 2453 | dev->n_sectors = ata_id_n_sectors(id); |
2940740b | 2454 | |
e18086d6 ML |
2455 | /* get current R/W Multiple count setting */ |
2456 | if ((dev->id[47] >> 8) == 0x80 && (dev->id[59] & 0x100)) { | |
2457 | unsigned int max = dev->id[47] & 0xff; | |
2458 | unsigned int cnt = dev->id[59] & 0xff; | |
2459 | /* only recognize/allow powers of two here */ | |
2460 | if (is_power_of_2(max) && is_power_of_2(cnt)) | |
2461 | if (cnt <= max) | |
2462 | dev->multi_count = cnt; | |
2463 | } | |
3f64f565 | 2464 | |
1148c3a7 | 2465 | if (ata_id_has_lba(id)) { |
4c2d721a | 2466 | const char *lba_desc; |
388539f3 | 2467 | char ncq_desc[24]; |
8bf62ece | 2468 | |
4c2d721a TH |
2469 | lba_desc = "LBA"; |
2470 | dev->flags |= ATA_DFLAG_LBA; | |
1148c3a7 | 2471 | if (ata_id_has_lba48(id)) { |
8bf62ece | 2472 | dev->flags |= ATA_DFLAG_LBA48; |
4c2d721a | 2473 | lba_desc = "LBA48"; |
6fc49adb TH |
2474 | |
2475 | if (dev->n_sectors >= (1UL << 28) && | |
2476 | ata_id_has_flush_ext(id)) | |
2477 | dev->flags |= ATA_DFLAG_FLUSH_EXT; | |
4c2d721a | 2478 | } |
8bf62ece | 2479 | |
a6e6ce8e | 2480 | /* config NCQ */ |
388539f3 SL |
2481 | rc = ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc)); |
2482 | if (rc) | |
2483 | return rc; | |
a6e6ce8e | 2484 | |
8bf62ece | 2485 | /* print device info to dmesg */ |
3f64f565 | 2486 | if (ata_msg_drv(ap) && print_info) { |
a9a79dfe JP |
2487 | ata_dev_info(dev, "%s: %s, %s, max %s\n", |
2488 | revbuf, modelbuf, fwrevbuf, | |
2489 | ata_mode_string(xfer_mask)); | |
2490 | ata_dev_info(dev, | |
2491 | "%llu sectors, multi %u: %s %s\n", | |
f15a1daf | 2492 | (unsigned long long)dev->n_sectors, |
3f64f565 EM |
2493 | dev->multi_count, lba_desc, ncq_desc); |
2494 | } | |
ffeae418 | 2495 | } else { |
8bf62ece AL |
2496 | /* CHS */ |
2497 | ||
2498 | /* Default translation */ | |
1148c3a7 TH |
2499 | dev->cylinders = id[1]; |
2500 | dev->heads = id[3]; | |
2501 | dev->sectors = id[6]; | |
8bf62ece | 2502 | |
1148c3a7 | 2503 | if (ata_id_current_chs_valid(id)) { |
8bf62ece | 2504 | /* Current CHS translation is valid. */ |
1148c3a7 TH |
2505 | dev->cylinders = id[54]; |
2506 | dev->heads = id[55]; | |
2507 | dev->sectors = id[56]; | |
8bf62ece AL |
2508 | } |
2509 | ||
2510 | /* print device info to dmesg */ | |
3f64f565 | 2511 | if (ata_msg_drv(ap) && print_info) { |
a9a79dfe JP |
2512 | ata_dev_info(dev, "%s: %s, %s, max %s\n", |
2513 | revbuf, modelbuf, fwrevbuf, | |
2514 | ata_mode_string(xfer_mask)); | |
2515 | ata_dev_info(dev, | |
2516 | "%llu sectors, multi %u, CHS %u/%u/%u\n", | |
2517 | (unsigned long long)dev->n_sectors, | |
2518 | dev->multi_count, dev->cylinders, | |
2519 | dev->heads, dev->sectors); | |
3f64f565 | 2520 | } |
07f6f7d0 AL |
2521 | } |
2522 | ||
803739d2 SH |
2523 | /* Check and mark DevSlp capability. Get DevSlp timing variables |
2524 | * from SATA Settings page of Identify Device Data Log. | |
65fe1f0f | 2525 | */ |
803739d2 | 2526 | if (ata_id_has_devslp(dev->id)) { |
8e725c7f | 2527 | u8 *sata_setting = ap->sector_buf; |
803739d2 SH |
2528 | int i, j; |
2529 | ||
2530 | dev->flags |= ATA_DFLAG_DEVSLP; | |
65fe1f0f SH |
2531 | err_mask = ata_read_log_page(dev, |
2532 | ATA_LOG_SATA_ID_DEV_DATA, | |
2533 | ATA_LOG_SATA_SETTINGS, | |
803739d2 | 2534 | sata_setting, |
65fe1f0f SH |
2535 | 1); |
2536 | if (err_mask) | |
2537 | ata_dev_dbg(dev, | |
2538 | "failed to get Identify Device Data, Emask 0x%x\n", | |
2539 | err_mask); | |
803739d2 SH |
2540 | else |
2541 | for (i = 0; i < ATA_LOG_DEVSLP_SIZE; i++) { | |
2542 | j = ATA_LOG_DEVSLP_OFFSET + i; | |
2543 | dev->devslp_timing[i] = sata_setting[j]; | |
2544 | } | |
65fe1f0f | 2545 | } |
e87fd28c | 2546 | ata_dev_config_sense_reporting(dev); |
6d1003ae | 2547 | ata_dev_config_zac(dev); |
6e7846e9 | 2548 | dev->cdb_len = 16; |
1da177e4 LT |
2549 | } |
2550 | ||
2551 | /* ATAPI-specific feature tests */ | |
2c13b7ce | 2552 | else if (dev->class == ATA_DEV_ATAPI) { |
854c73a2 TH |
2553 | const char *cdb_intr_string = ""; |
2554 | const char *atapi_an_string = ""; | |
91163006 | 2555 | const char *dma_dir_string = ""; |
7d77b247 | 2556 | u32 sntf; |
08a556db | 2557 | |
1148c3a7 | 2558 | rc = atapi_cdb_len(id); |
1da177e4 | 2559 | if ((rc < 12) || (rc > ATAPI_CDB_LEN)) { |
0dd4b21f | 2560 | if (ata_msg_warn(ap)) |
a9a79dfe | 2561 | ata_dev_warn(dev, "unsupported CDB len\n"); |
ffeae418 | 2562 | rc = -EINVAL; |
1da177e4 LT |
2563 | goto err_out_nosup; |
2564 | } | |
6e7846e9 | 2565 | dev->cdb_len = (unsigned int) rc; |
1da177e4 | 2566 | |
7d77b247 TH |
2567 | /* Enable ATAPI AN if both the host and device have |
2568 | * the support. If PMP is attached, SNTF is required | |
2569 | * to enable ATAPI AN to discern between PHY status | |
2570 | * changed notifications and ATAPI ANs. | |
9f45cbd3 | 2571 | */ |
e7ecd435 TH |
2572 | if (atapi_an && |
2573 | (ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) && | |
071f44b1 | 2574 | (!sata_pmp_attached(ap) || |
7d77b247 | 2575 | sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) { |
9f45cbd3 | 2576 | /* issue SET feature command to turn this on */ |
218f3d30 JG |
2577 | err_mask = ata_dev_set_feature(dev, |
2578 | SETFEATURES_SATA_ENABLE, SATA_AN); | |
854c73a2 | 2579 | if (err_mask) |
a9a79dfe JP |
2580 | ata_dev_err(dev, |
2581 | "failed to enable ATAPI AN (err_mask=0x%x)\n", | |
2582 | err_mask); | |
854c73a2 | 2583 | else { |
9f45cbd3 | 2584 | dev->flags |= ATA_DFLAG_AN; |
854c73a2 TH |
2585 | atapi_an_string = ", ATAPI AN"; |
2586 | } | |
9f45cbd3 KCA |
2587 | } |
2588 | ||
08a556db | 2589 | if (ata_id_cdb_intr(dev->id)) { |
312f7da2 | 2590 | dev->flags |= ATA_DFLAG_CDB_INTR; |
08a556db AL |
2591 | cdb_intr_string = ", CDB intr"; |
2592 | } | |
312f7da2 | 2593 | |
966fbe19 | 2594 | if (atapi_dmadir || (dev->horkage & ATA_HORKAGE_ATAPI_DMADIR) || atapi_id_dmadir(dev->id)) { |
91163006 TH |
2595 | dev->flags |= ATA_DFLAG_DMADIR; |
2596 | dma_dir_string = ", DMADIR"; | |
2597 | } | |
2598 | ||
afe75951 | 2599 | if (ata_id_has_da(dev->id)) { |
b1354cbb | 2600 | dev->flags |= ATA_DFLAG_DA; |
afe75951 AL |
2601 | zpodd_init(dev); |
2602 | } | |
b1354cbb | 2603 | |
1da177e4 | 2604 | /* print device info to dmesg */ |
5afc8142 | 2605 | if (ata_msg_drv(ap) && print_info) |
a9a79dfe JP |
2606 | ata_dev_info(dev, |
2607 | "ATAPI: %s, %s, max %s%s%s%s\n", | |
2608 | modelbuf, fwrevbuf, | |
2609 | ata_mode_string(xfer_mask), | |
2610 | cdb_intr_string, atapi_an_string, | |
2611 | dma_dir_string); | |
1da177e4 LT |
2612 | } |
2613 | ||
914ed354 TH |
2614 | /* determine max_sectors */ |
2615 | dev->max_sectors = ATA_MAX_SECTORS; | |
2616 | if (dev->flags & ATA_DFLAG_LBA48) | |
2617 | dev->max_sectors = ATA_MAX_SECTORS_LBA48; | |
2618 | ||
c5038fc0 AC |
2619 | /* Limit PATA drive on SATA cable bridge transfers to udma5, |
2620 | 200 sectors */ | |
3373efd8 | 2621 | if (ata_dev_knobble(dev)) { |
5afc8142 | 2622 | if (ata_msg_drv(ap) && print_info) |
a9a79dfe | 2623 | ata_dev_info(dev, "applying bridge limits\n"); |
5a529139 | 2624 | dev->udma_mask &= ATA_UDMA5; |
4b2f3ede TH |
2625 | dev->max_sectors = ATA_MAX_SECTORS; |
2626 | } | |
2627 | ||
f8d8e579 | 2628 | if ((dev->class == ATA_DEV_ATAPI) && |
f442cd86 | 2629 | (atapi_command_packet_set(id) == TYPE_TAPE)) { |
f8d8e579 | 2630 | dev->max_sectors = ATA_MAX_SECTORS_TAPE; |
f442cd86 AL |
2631 | dev->horkage |= ATA_HORKAGE_STUCK_ERR; |
2632 | } | |
f8d8e579 | 2633 | |
75683fe7 | 2634 | if (dev->horkage & ATA_HORKAGE_MAX_SEC_128) |
03ec52de TH |
2635 | dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, |
2636 | dev->max_sectors); | |
18d6e9d5 | 2637 | |
af34d637 DM |
2638 | if (dev->horkage & ATA_HORKAGE_MAX_SEC_1024) |
2639 | dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_1024, | |
2640 | dev->max_sectors); | |
2641 | ||
a32450e1 SH |
2642 | if (dev->horkage & ATA_HORKAGE_MAX_SEC_LBA48) |
2643 | dev->max_sectors = ATA_MAX_SECTORS_LBA48; | |
2644 | ||
4b2f3ede | 2645 | if (ap->ops->dev_config) |
cd0d3bbc | 2646 | ap->ops->dev_config(dev); |
4b2f3ede | 2647 | |
c5038fc0 AC |
2648 | if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) { |
2649 | /* Let the user know. We don't want to disallow opens for | |
2650 | rescue purposes, or in case the vendor is just a blithering | |
2651 | idiot. Do this after the dev_config call as some controllers | |
2652 | with buggy firmware may want to avoid reporting false device | |
2653 | bugs */ | |
2654 | ||
2655 | if (print_info) { | |
a9a79dfe | 2656 | ata_dev_warn(dev, |
c5038fc0 | 2657 | "Drive reports diagnostics failure. This may indicate a drive\n"); |
a9a79dfe | 2658 | ata_dev_warn(dev, |
c5038fc0 AC |
2659 | "fault or invalid emulation. Contact drive vendor for information.\n"); |
2660 | } | |
2661 | } | |
2662 | ||
ac70a964 | 2663 | if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) { |
a9a79dfe JP |
2664 | ata_dev_warn(dev, "WARNING: device requires firmware update to be fully functional\n"); |
2665 | ata_dev_warn(dev, " contact the vendor or visit http://ata.wiki.kernel.org\n"); | |
ac70a964 TH |
2666 | } |
2667 | ||
ffeae418 | 2668 | return 0; |
1da177e4 LT |
2669 | |
2670 | err_out_nosup: | |
0dd4b21f | 2671 | if (ata_msg_probe(ap)) |
a9a79dfe | 2672 | ata_dev_dbg(dev, "%s: EXIT, err\n", __func__); |
ffeae418 | 2673 | return rc; |
1da177e4 LT |
2674 | } |
2675 | ||
be0d18df | 2676 | /** |
2e41e8e6 | 2677 | * ata_cable_40wire - return 40 wire cable type |
be0d18df AC |
2678 | * @ap: port |
2679 | * | |
2e41e8e6 | 2680 | * Helper method for drivers which want to hardwire 40 wire cable |
be0d18df AC |
2681 | * detection. |
2682 | */ | |
2683 | ||
2684 | int ata_cable_40wire(struct ata_port *ap) | |
2685 | { | |
2686 | return ATA_CBL_PATA40; | |
2687 | } | |
2688 | ||
2689 | /** | |
2e41e8e6 | 2690 | * ata_cable_80wire - return 80 wire cable type |
be0d18df AC |
2691 | * @ap: port |
2692 | * | |
2e41e8e6 | 2693 | * Helper method for drivers which want to hardwire 80 wire cable |
be0d18df AC |
2694 | * detection. |
2695 | */ | |
2696 | ||
2697 | int ata_cable_80wire(struct ata_port *ap) | |
2698 | { | |
2699 | return ATA_CBL_PATA80; | |
2700 | } | |
2701 | ||
2702 | /** | |
2703 | * ata_cable_unknown - return unknown PATA cable. | |
2704 | * @ap: port | |
2705 | * | |
2706 | * Helper method for drivers which have no PATA cable detection. | |
2707 | */ | |
2708 | ||
2709 | int ata_cable_unknown(struct ata_port *ap) | |
2710 | { | |
2711 | return ATA_CBL_PATA_UNK; | |
2712 | } | |
2713 | ||
c88f90c3 TH |
2714 | /** |
2715 | * ata_cable_ignore - return ignored PATA cable. | |
2716 | * @ap: port | |
2717 | * | |
2718 | * Helper method for drivers which don't use cable type to limit | |
2719 | * transfer mode. | |
2720 | */ | |
2721 | int ata_cable_ignore(struct ata_port *ap) | |
2722 | { | |
2723 | return ATA_CBL_PATA_IGN; | |
2724 | } | |
2725 | ||
be0d18df AC |
2726 | /** |
2727 | * ata_cable_sata - return SATA cable type | |
2728 | * @ap: port | |
2729 | * | |
2730 | * Helper method for drivers which have SATA cables | |
2731 | */ | |
2732 | ||
2733 | int ata_cable_sata(struct ata_port *ap) | |
2734 | { | |
2735 | return ATA_CBL_SATA; | |
2736 | } | |
2737 | ||
1da177e4 LT |
2738 | /** |
2739 | * ata_bus_probe - Reset and probe ATA bus | |
2740 | * @ap: Bus to probe | |
2741 | * | |
0cba632b JG |
2742 | * Master ATA bus probing function. Initiates a hardware-dependent |
2743 | * bus reset, then attempts to identify any devices found on | |
2744 | * the bus. | |
2745 | * | |
1da177e4 | 2746 | * LOCKING: |
0cba632b | 2747 | * PCI/etc. bus probe sem. |
1da177e4 LT |
2748 | * |
2749 | * RETURNS: | |
96072e69 | 2750 | * Zero on success, negative errno otherwise. |
1da177e4 LT |
2751 | */ |
2752 | ||
80289167 | 2753 | int ata_bus_probe(struct ata_port *ap) |
1da177e4 | 2754 | { |
28ca5c57 | 2755 | unsigned int classes[ATA_MAX_DEVICES]; |
14d2bac1 | 2756 | int tries[ATA_MAX_DEVICES]; |
f58229f8 | 2757 | int rc; |
e82cbdb9 | 2758 | struct ata_device *dev; |
1da177e4 | 2759 | |
1eca4365 | 2760 | ata_for_each_dev(dev, &ap->link, ALL) |
f58229f8 | 2761 | tries[dev->devno] = ATA_PROBE_MAX_TRIES; |
14d2bac1 TH |
2762 | |
2763 | retry: | |
1eca4365 | 2764 | ata_for_each_dev(dev, &ap->link, ALL) { |
cdeab114 TH |
2765 | /* If we issue an SRST then an ATA drive (not ATAPI) |
2766 | * may change configuration and be in PIO0 timing. If | |
2767 | * we do a hard reset (or are coming from power on) | |
2768 | * this is true for ATA or ATAPI. Until we've set a | |
2769 | * suitable controller mode we should not touch the | |
2770 | * bus as we may be talking too fast. | |
2771 | */ | |
2772 | dev->pio_mode = XFER_PIO_0; | |
5416912a | 2773 | dev->dma_mode = 0xff; |
cdeab114 TH |
2774 | |
2775 | /* If the controller has a pio mode setup function | |
2776 | * then use it to set the chipset to rights. Don't | |
2777 | * touch the DMA setup as that will be dealt with when | |
2778 | * configuring devices. | |
2779 | */ | |
2780 | if (ap->ops->set_piomode) | |
2781 | ap->ops->set_piomode(ap, dev); | |
2782 | } | |
2783 | ||
2044470c | 2784 | /* reset and determine device classes */ |
52783c5d | 2785 | ap->ops->phy_reset(ap); |
2061a47a | 2786 | |
1eca4365 | 2787 | ata_for_each_dev(dev, &ap->link, ALL) { |
3e4ec344 | 2788 | if (dev->class != ATA_DEV_UNKNOWN) |
52783c5d TH |
2789 | classes[dev->devno] = dev->class; |
2790 | else | |
2791 | classes[dev->devno] = ATA_DEV_NONE; | |
2044470c | 2792 | |
52783c5d | 2793 | dev->class = ATA_DEV_UNKNOWN; |
28ca5c57 | 2794 | } |
1da177e4 | 2795 | |
f31f0cc2 JG |
2796 | /* read IDENTIFY page and configure devices. We have to do the identify |
2797 | specific sequence bass-ackwards so that PDIAG- is released by | |
2798 | the slave device */ | |
2799 | ||
1eca4365 | 2800 | ata_for_each_dev(dev, &ap->link, ALL_REVERSE) { |
f58229f8 TH |
2801 | if (tries[dev->devno]) |
2802 | dev->class = classes[dev->devno]; | |
ffeae418 | 2803 | |
14d2bac1 | 2804 | if (!ata_dev_enabled(dev)) |
ffeae418 | 2805 | continue; |
ffeae418 | 2806 | |
bff04647 TH |
2807 | rc = ata_dev_read_id(dev, &dev->class, ATA_READID_POSTRESET, |
2808 | dev->id); | |
14d2bac1 TH |
2809 | if (rc) |
2810 | goto fail; | |
f31f0cc2 JG |
2811 | } |
2812 | ||
be0d18df AC |
2813 | /* Now ask for the cable type as PDIAG- should have been released */ |
2814 | if (ap->ops->cable_detect) | |
2815 | ap->cbl = ap->ops->cable_detect(ap); | |
2816 | ||
1eca4365 TH |
2817 | /* We may have SATA bridge glue hiding here irrespective of |
2818 | * the reported cable types and sensed types. When SATA | |
2819 | * drives indicate we have a bridge, we don't know which end | |
2820 | * of the link the bridge is which is a problem. | |
2821 | */ | |
2822 | ata_for_each_dev(dev, &ap->link, ENABLED) | |
614fe29b AC |
2823 | if (ata_id_is_sata(dev->id)) |
2824 | ap->cbl = ATA_CBL_SATA; | |
614fe29b | 2825 | |
f31f0cc2 JG |
2826 | /* After the identify sequence we can now set up the devices. We do |
2827 | this in the normal order so that the user doesn't get confused */ | |
2828 | ||
1eca4365 | 2829 | ata_for_each_dev(dev, &ap->link, ENABLED) { |
9af5c9c9 | 2830 | ap->link.eh_context.i.flags |= ATA_EHI_PRINTINFO; |
efdaedc4 | 2831 | rc = ata_dev_configure(dev); |
9af5c9c9 | 2832 | ap->link.eh_context.i.flags &= ~ATA_EHI_PRINTINFO; |
14d2bac1 TH |
2833 | if (rc) |
2834 | goto fail; | |
1da177e4 LT |
2835 | } |
2836 | ||
e82cbdb9 | 2837 | /* configure transfer mode */ |
0260731f | 2838 | rc = ata_set_mode(&ap->link, &dev); |
4ae72a1e | 2839 | if (rc) |
51713d35 | 2840 | goto fail; |
1da177e4 | 2841 | |
1eca4365 TH |
2842 | ata_for_each_dev(dev, &ap->link, ENABLED) |
2843 | return 0; | |
1da177e4 | 2844 | |
96072e69 | 2845 | return -ENODEV; |
14d2bac1 TH |
2846 | |
2847 | fail: | |
4ae72a1e TH |
2848 | tries[dev->devno]--; |
2849 | ||
14d2bac1 TH |
2850 | switch (rc) { |
2851 | case -EINVAL: | |
4ae72a1e | 2852 | /* eeek, something went very wrong, give up */ |
14d2bac1 TH |
2853 | tries[dev->devno] = 0; |
2854 | break; | |
4ae72a1e TH |
2855 | |
2856 | case -ENODEV: | |
2857 | /* give it just one more chance */ | |
2858 | tries[dev->devno] = min(tries[dev->devno], 1); | |
14d2bac1 | 2859 | case -EIO: |
4ae72a1e TH |
2860 | if (tries[dev->devno] == 1) { |
2861 | /* This is the last chance, better to slow | |
2862 | * down than lose it. | |
2863 | */ | |
a07d499b | 2864 | sata_down_spd_limit(&ap->link, 0); |
4ae72a1e TH |
2865 | ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); |
2866 | } | |
14d2bac1 TH |
2867 | } |
2868 | ||
4ae72a1e | 2869 | if (!tries[dev->devno]) |
3373efd8 | 2870 | ata_dev_disable(dev); |
ec573755 | 2871 | |
14d2bac1 | 2872 | goto retry; |
1da177e4 LT |
2873 | } |
2874 | ||
3be680b7 TH |
2875 | /** |
2876 | * sata_print_link_status - Print SATA link status | |
936fd732 | 2877 | * @link: SATA link to printk link status about |
3be680b7 TH |
2878 | * |
2879 | * This function prints link speed and status of a SATA link. | |
2880 | * | |
2881 | * LOCKING: | |
2882 | * None. | |
2883 | */ | |
6bdb4fc9 | 2884 | static void sata_print_link_status(struct ata_link *link) |
3be680b7 | 2885 | { |
6d5f9732 | 2886 | u32 sstatus, scontrol, tmp; |
3be680b7 | 2887 | |
936fd732 | 2888 | if (sata_scr_read(link, SCR_STATUS, &sstatus)) |
3be680b7 | 2889 | return; |
936fd732 | 2890 | sata_scr_read(link, SCR_CONTROL, &scontrol); |
3be680b7 | 2891 | |
b1c72916 | 2892 | if (ata_phys_link_online(link)) { |
3be680b7 | 2893 | tmp = (sstatus >> 4) & 0xf; |
a9a79dfe JP |
2894 | ata_link_info(link, "SATA link up %s (SStatus %X SControl %X)\n", |
2895 | sata_spd_string(tmp), sstatus, scontrol); | |
3be680b7 | 2896 | } else { |
a9a79dfe JP |
2897 | ata_link_info(link, "SATA link down (SStatus %X SControl %X)\n", |
2898 | sstatus, scontrol); | |
3be680b7 TH |
2899 | } |
2900 | } | |
2901 | ||
ebdfca6e AC |
2902 | /** |
2903 | * ata_dev_pair - return other device on cable | |
ebdfca6e AC |
2904 | * @adev: device |
2905 | * | |
2906 | * Obtain the other device on the same cable, or if none is | |
2907 | * present NULL is returned | |
2908 | */ | |
2e9edbf8 | 2909 | |
3373efd8 | 2910 | struct ata_device *ata_dev_pair(struct ata_device *adev) |
ebdfca6e | 2911 | { |
9af5c9c9 TH |
2912 | struct ata_link *link = adev->link; |
2913 | struct ata_device *pair = &link->device[1 - adev->devno]; | |
e1211e3f | 2914 | if (!ata_dev_enabled(pair)) |
ebdfca6e AC |
2915 | return NULL; |
2916 | return pair; | |
2917 | } | |
2918 | ||
1c3fae4d | 2919 | /** |
3c567b7d | 2920 | * sata_down_spd_limit - adjust SATA spd limit downward |
936fd732 | 2921 | * @link: Link to adjust SATA spd limit for |
a07d499b | 2922 | * @spd_limit: Additional limit |
1c3fae4d | 2923 | * |
936fd732 | 2924 | * Adjust SATA spd limit of @link downward. Note that this |
1c3fae4d | 2925 | * function only adjusts the limit. The change must be applied |
3c567b7d | 2926 | * using sata_set_spd(). |
1c3fae4d | 2927 | * |
a07d499b TH |
2928 | * If @spd_limit is non-zero, the speed is limited to equal to or |
2929 | * lower than @spd_limit if such speed is supported. If | |
2930 | * @spd_limit is slower than any supported speed, only the lowest | |
2931 | * supported speed is allowed. | |
2932 | * | |
1c3fae4d TH |
2933 | * LOCKING: |
2934 | * Inherited from caller. | |
2935 | * | |
2936 | * RETURNS: | |
2937 | * 0 on success, negative errno on failure | |
2938 | */ | |
a07d499b | 2939 | int sata_down_spd_limit(struct ata_link *link, u32 spd_limit) |
1c3fae4d | 2940 | { |
81952c54 | 2941 | u32 sstatus, spd, mask; |
a07d499b | 2942 | int rc, bit; |
1c3fae4d | 2943 | |
936fd732 | 2944 | if (!sata_scr_valid(link)) |
008a7896 TH |
2945 | return -EOPNOTSUPP; |
2946 | ||
2947 | /* If SCR can be read, use it to determine the current SPD. | |
936fd732 | 2948 | * If not, use cached value in link->sata_spd. |
008a7896 | 2949 | */ |
936fd732 | 2950 | rc = sata_scr_read(link, SCR_STATUS, &sstatus); |
9913ff8a | 2951 | if (rc == 0 && ata_sstatus_online(sstatus)) |
008a7896 TH |
2952 | spd = (sstatus >> 4) & 0xf; |
2953 | else | |
936fd732 | 2954 | spd = link->sata_spd; |
1c3fae4d | 2955 | |
936fd732 | 2956 | mask = link->sata_spd_limit; |
1c3fae4d TH |
2957 | if (mask <= 1) |
2958 | return -EINVAL; | |
008a7896 TH |
2959 | |
2960 | /* unconditionally mask off the highest bit */ | |
a07d499b TH |
2961 | bit = fls(mask) - 1; |
2962 | mask &= ~(1 << bit); | |
1c3fae4d | 2963 | |
008a7896 TH |
2964 | /* Mask off all speeds higher than or equal to the current |
2965 | * one. Force 1.5Gbps if current SPD is not available. | |
2966 | */ | |
2967 | if (spd > 1) | |
2968 | mask &= (1 << (spd - 1)) - 1; | |
2969 | else | |
2970 | mask &= 1; | |
2971 | ||
2972 | /* were we already at the bottom? */ | |
1c3fae4d TH |
2973 | if (!mask) |
2974 | return -EINVAL; | |
2975 | ||
a07d499b TH |
2976 | if (spd_limit) { |
2977 | if (mask & ((1 << spd_limit) - 1)) | |
2978 | mask &= (1 << spd_limit) - 1; | |
2979 | else { | |
2980 | bit = ffs(mask) - 1; | |
2981 | mask = 1 << bit; | |
2982 | } | |
2983 | } | |
2984 | ||
936fd732 | 2985 | link->sata_spd_limit = mask; |
1c3fae4d | 2986 | |
a9a79dfe JP |
2987 | ata_link_warn(link, "limiting SATA link speed to %s\n", |
2988 | sata_spd_string(fls(mask))); | |
1c3fae4d TH |
2989 | |
2990 | return 0; | |
2991 | } | |
2992 | ||
936fd732 | 2993 | static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol) |
1c3fae4d | 2994 | { |
5270222f TH |
2995 | struct ata_link *host_link = &link->ap->link; |
2996 | u32 limit, target, spd; | |
1c3fae4d | 2997 | |
5270222f TH |
2998 | limit = link->sata_spd_limit; |
2999 | ||
3000 | /* Don't configure downstream link faster than upstream link. | |
3001 | * It doesn't speed up anything and some PMPs choke on such | |
3002 | * configuration. | |
3003 | */ | |
3004 | if (!ata_is_host_link(link) && host_link->sata_spd) | |
3005 | limit &= (1 << host_link->sata_spd) - 1; | |
3006 | ||
3007 | if (limit == UINT_MAX) | |
3008 | target = 0; | |
1c3fae4d | 3009 | else |
5270222f | 3010 | target = fls(limit); |
1c3fae4d TH |
3011 | |
3012 | spd = (*scontrol >> 4) & 0xf; | |
5270222f | 3013 | *scontrol = (*scontrol & ~0xf0) | ((target & 0xf) << 4); |
1c3fae4d | 3014 | |
5270222f | 3015 | return spd != target; |
1c3fae4d TH |
3016 | } |
3017 | ||
3018 | /** | |
3c567b7d | 3019 | * sata_set_spd_needed - is SATA spd configuration needed |
936fd732 | 3020 | * @link: Link in question |
1c3fae4d TH |
3021 | * |
3022 | * Test whether the spd limit in SControl matches | |
936fd732 | 3023 | * @link->sata_spd_limit. This function is used to determine |
1c3fae4d TH |
3024 | * whether hardreset is necessary to apply SATA spd |
3025 | * configuration. | |
3026 | * | |
3027 | * LOCKING: | |
3028 | * Inherited from caller. | |
3029 | * | |
3030 | * RETURNS: | |
3031 | * 1 if SATA spd configuration is needed, 0 otherwise. | |
3032 | */ | |
1dc55e87 | 3033 | static int sata_set_spd_needed(struct ata_link *link) |
1c3fae4d TH |
3034 | { |
3035 | u32 scontrol; | |
3036 | ||
936fd732 | 3037 | if (sata_scr_read(link, SCR_CONTROL, &scontrol)) |
db64bcf3 | 3038 | return 1; |
1c3fae4d | 3039 | |
936fd732 | 3040 | return __sata_set_spd_needed(link, &scontrol); |
1c3fae4d TH |
3041 | } |
3042 | ||
3043 | /** | |
3c567b7d | 3044 | * sata_set_spd - set SATA spd according to spd limit |
936fd732 | 3045 | * @link: Link to set SATA spd for |
1c3fae4d | 3046 | * |
936fd732 | 3047 | * Set SATA spd of @link according to sata_spd_limit. |
1c3fae4d TH |
3048 | * |
3049 | * LOCKING: | |
3050 | * Inherited from caller. | |
3051 | * | |
3052 | * RETURNS: | |
3053 | * 0 if spd doesn't need to be changed, 1 if spd has been | |
81952c54 | 3054 | * changed. Negative errno if SCR registers are inaccessible. |
1c3fae4d | 3055 | */ |
936fd732 | 3056 | int sata_set_spd(struct ata_link *link) |
1c3fae4d TH |
3057 | { |
3058 | u32 scontrol; | |
81952c54 | 3059 | int rc; |
1c3fae4d | 3060 | |
936fd732 | 3061 | if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) |
81952c54 | 3062 | return rc; |
1c3fae4d | 3063 | |
936fd732 | 3064 | if (!__sata_set_spd_needed(link, &scontrol)) |
1c3fae4d TH |
3065 | return 0; |
3066 | ||
936fd732 | 3067 | if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) |
81952c54 TH |
3068 | return rc; |
3069 | ||
1c3fae4d TH |
3070 | return 1; |
3071 | } | |
3072 | ||
452503f9 AC |
3073 | /* |
3074 | * This mode timing computation functionality is ported over from | |
3075 | * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik | |
3076 | */ | |
3077 | /* | |
b352e57d | 3078 | * PIO 0-4, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). |
452503f9 | 3079 | * These were taken from ATA/ATAPI-6 standard, rev 0a, except |
b352e57d AC |
3080 | * for UDMA6, which is currently supported only by Maxtor drives. |
3081 | * | |
3082 | * For PIO 5/6 MWDMA 3/4 see the CFA specification 3.0. | |
452503f9 AC |
3083 | */ |
3084 | ||
3085 | static const struct ata_timing ata_timing[] = { | |
3ada9c12 DD |
3086 | /* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 0, 960, 0 }, */ |
3087 | { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 0, 600, 0 }, | |
3088 | { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 0, 383, 0 }, | |
3089 | { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 0, 240, 0 }, | |
3090 | { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 0, 180, 0 }, | |
3091 | { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 0, 120, 0 }, | |
3092 | { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 0, 100, 0 }, | |
3093 | { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 0, 80, 0 }, | |
3094 | ||
3095 | { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 50, 960, 0 }, | |
3096 | { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 30, 480, 0 }, | |
3097 | { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 20, 240, 0 }, | |
3098 | ||
3099 | { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 20, 480, 0 }, | |
3100 | { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 5, 150, 0 }, | |
3101 | { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 5, 120, 0 }, | |
3102 | { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 5, 100, 0 }, | |
3103 | { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 5, 80, 0 }, | |
3104 | ||
3105 | /* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 0, 150 }, */ | |
3106 | { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 0, 120 }, | |
3107 | { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 0, 80 }, | |
3108 | { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 0, 60 }, | |
3109 | { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 0, 45 }, | |
3110 | { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 0, 30 }, | |
3111 | { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 0, 20 }, | |
3112 | { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 0, 15 }, | |
452503f9 AC |
3113 | |
3114 | { 0xFF } | |
3115 | }; | |
3116 | ||
2dcb407e JG |
3117 | #define ENOUGH(v, unit) (((v)-1)/(unit)+1) |
3118 | #define EZ(v, unit) ((v)?ENOUGH(v, unit):0) | |
452503f9 AC |
3119 | |
3120 | static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT) | |
3121 | { | |
3ada9c12 DD |
3122 | q->setup = EZ(t->setup * 1000, T); |
3123 | q->act8b = EZ(t->act8b * 1000, T); | |
3124 | q->rec8b = EZ(t->rec8b * 1000, T); | |
3125 | q->cyc8b = EZ(t->cyc8b * 1000, T); | |
3126 | q->active = EZ(t->active * 1000, T); | |
3127 | q->recover = EZ(t->recover * 1000, T); | |
3128 | q->dmack_hold = EZ(t->dmack_hold * 1000, T); | |
3129 | q->cycle = EZ(t->cycle * 1000, T); | |
3130 | q->udma = EZ(t->udma * 1000, UT); | |
452503f9 AC |
3131 | } |
3132 | ||
3133 | void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b, | |
3134 | struct ata_timing *m, unsigned int what) | |
3135 | { | |
3136 | if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup); | |
3137 | if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b); | |
3138 | if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b); | |
3139 | if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b); | |
3140 | if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active); | |
3141 | if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover); | |
3ada9c12 | 3142 | if (what & ATA_TIMING_DMACK_HOLD) m->dmack_hold = max(a->dmack_hold, b->dmack_hold); |
452503f9 AC |
3143 | if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle); |
3144 | if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma); | |
3145 | } | |
3146 | ||
6357357c | 3147 | const struct ata_timing *ata_timing_find_mode(u8 xfer_mode) |
452503f9 | 3148 | { |
70cd071e TH |
3149 | const struct ata_timing *t = ata_timing; |
3150 | ||
3151 | while (xfer_mode > t->mode) | |
3152 | t++; | |
452503f9 | 3153 | |
70cd071e TH |
3154 | if (xfer_mode == t->mode) |
3155 | return t; | |
cd705d5a BP |
3156 | |
3157 | WARN_ONCE(true, "%s: unable to find timing for xfer_mode 0x%x\n", | |
3158 | __func__, xfer_mode); | |
3159 | ||
70cd071e | 3160 | return NULL; |
452503f9 AC |
3161 | } |
3162 | ||
3163 | int ata_timing_compute(struct ata_device *adev, unsigned short speed, | |
3164 | struct ata_timing *t, int T, int UT) | |
3165 | { | |
9e8808a9 | 3166 | const u16 *id = adev->id; |
452503f9 AC |
3167 | const struct ata_timing *s; |
3168 | struct ata_timing p; | |
3169 | ||
3170 | /* | |
2e9edbf8 | 3171 | * Find the mode. |
75b1f2f8 | 3172 | */ |
452503f9 AC |
3173 | |
3174 | if (!(s = ata_timing_find_mode(speed))) | |
3175 | return -EINVAL; | |
3176 | ||
75b1f2f8 AL |
3177 | memcpy(t, s, sizeof(*s)); |
3178 | ||
452503f9 AC |
3179 | /* |
3180 | * If the drive is an EIDE drive, it can tell us it needs extended | |
3181 | * PIO/MW_DMA cycle timing. | |
3182 | */ | |
3183 | ||
9e8808a9 | 3184 | if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ |
452503f9 | 3185 | memset(&p, 0, sizeof(p)); |
9e8808a9 | 3186 | |
bff00256 | 3187 | if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) { |
9e8808a9 BZ |
3188 | if (speed <= XFER_PIO_2) |
3189 | p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO]; | |
3190 | else if ((speed <= XFER_PIO_4) || | |
3191 | (speed == XFER_PIO_5 && !ata_id_is_cfa(id))) | |
3192 | p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY]; | |
3193 | } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) | |
3194 | p.cycle = id[ATA_ID_EIDE_DMA_MIN]; | |
3195 | ||
452503f9 AC |
3196 | ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); |
3197 | } | |
3198 | ||
3199 | /* | |
3200 | * Convert the timing to bus clock counts. | |
3201 | */ | |
3202 | ||
75b1f2f8 | 3203 | ata_timing_quantize(t, t, T, UT); |
452503f9 AC |
3204 | |
3205 | /* | |
c893a3ae RD |
3206 | * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, |
3207 | * S.M.A.R.T * and some other commands. We have to ensure that the | |
3208 | * DMA cycle timing is slower/equal than the fastest PIO timing. | |
452503f9 AC |
3209 | */ |
3210 | ||
fd3367af | 3211 | if (speed > XFER_PIO_6) { |
452503f9 AC |
3212 | ata_timing_compute(adev, adev->pio_mode, &p, T, UT); |
3213 | ata_timing_merge(&p, t, t, ATA_TIMING_ALL); | |
3214 | } | |
3215 | ||
3216 | /* | |
c893a3ae | 3217 | * Lengthen active & recovery time so that cycle time is correct. |
452503f9 AC |
3218 | */ |
3219 | ||
3220 | if (t->act8b + t->rec8b < t->cyc8b) { | |
3221 | t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; | |
3222 | t->rec8b = t->cyc8b - t->act8b; | |
3223 | } | |
3224 | ||
3225 | if (t->active + t->recover < t->cycle) { | |
3226 | t->active += (t->cycle - (t->active + t->recover)) / 2; | |
3227 | t->recover = t->cycle - t->active; | |
3228 | } | |
a617c09f | 3229 | |
4f701d1e AC |
3230 | /* In a few cases quantisation may produce enough errors to |
3231 | leave t->cycle too low for the sum of active and recovery | |
3232 | if so we must correct this */ | |
3233 | if (t->active + t->recover > t->cycle) | |
3234 | t->cycle = t->active + t->recover; | |
452503f9 AC |
3235 | |
3236 | return 0; | |
3237 | } | |
3238 | ||
a0f79b92 TH |
3239 | /** |
3240 | * ata_timing_cycle2mode - find xfer mode for the specified cycle duration | |
3241 | * @xfer_shift: ATA_SHIFT_* value for transfer type to examine. | |
3242 | * @cycle: cycle duration in ns | |
3243 | * | |
3244 | * Return matching xfer mode for @cycle. The returned mode is of | |
3245 | * the transfer type specified by @xfer_shift. If @cycle is too | |
3246 | * slow for @xfer_shift, 0xff is returned. If @cycle is faster | |
3247 | * than the fastest known mode, the fasted mode is returned. | |
3248 | * | |
3249 | * LOCKING: | |
3250 | * None. | |
3251 | * | |
3252 | * RETURNS: | |
3253 | * Matching xfer_mode, 0xff if no match found. | |
3254 | */ | |
3255 | u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle) | |
3256 | { | |
3257 | u8 base_mode = 0xff, last_mode = 0xff; | |
3258 | const struct ata_xfer_ent *ent; | |
3259 | const struct ata_timing *t; | |
3260 | ||
3261 | for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) | |
3262 | if (ent->shift == xfer_shift) | |
3263 | base_mode = ent->base; | |
3264 | ||
3265 | for (t = ata_timing_find_mode(base_mode); | |
3266 | t && ata_xfer_mode2shift(t->mode) == xfer_shift; t++) { | |
3267 | unsigned short this_cycle; | |
3268 | ||
3269 | switch (xfer_shift) { | |
3270 | case ATA_SHIFT_PIO: | |
3271 | case ATA_SHIFT_MWDMA: | |
3272 | this_cycle = t->cycle; | |
3273 | break; | |
3274 | case ATA_SHIFT_UDMA: | |
3275 | this_cycle = t->udma; | |
3276 | break; | |
3277 | default: | |
3278 | return 0xff; | |
3279 | } | |
3280 | ||
3281 | if (cycle > this_cycle) | |
3282 | break; | |
3283 | ||
3284 | last_mode = t->mode; | |
3285 | } | |
3286 | ||
3287 | return last_mode; | |
3288 | } | |
3289 | ||
cf176e1a TH |
3290 | /** |
3291 | * ata_down_xfermask_limit - adjust dev xfer masks downward | |
cf176e1a | 3292 | * @dev: Device to adjust xfer masks |
458337db | 3293 | * @sel: ATA_DNXFER_* selector |
cf176e1a TH |
3294 | * |
3295 | * Adjust xfer masks of @dev downward. Note that this function | |
3296 | * does not apply the change. Invoking ata_set_mode() afterwards | |
3297 | * will apply the limit. | |
3298 | * | |
3299 | * LOCKING: | |
3300 | * Inherited from caller. | |
3301 | * | |
3302 | * RETURNS: | |
3303 | * 0 on success, negative errno on failure | |
3304 | */ | |
458337db | 3305 | int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel) |
cf176e1a | 3306 | { |
458337db | 3307 | char buf[32]; |
7dc951ae TH |
3308 | unsigned long orig_mask, xfer_mask; |
3309 | unsigned long pio_mask, mwdma_mask, udma_mask; | |
458337db | 3310 | int quiet, highbit; |
cf176e1a | 3311 | |
458337db TH |
3312 | quiet = !!(sel & ATA_DNXFER_QUIET); |
3313 | sel &= ~ATA_DNXFER_QUIET; | |
cf176e1a | 3314 | |
458337db TH |
3315 | xfer_mask = orig_mask = ata_pack_xfermask(dev->pio_mask, |
3316 | dev->mwdma_mask, | |
3317 | dev->udma_mask); | |
3318 | ata_unpack_xfermask(xfer_mask, &pio_mask, &mwdma_mask, &udma_mask); | |
cf176e1a | 3319 | |
458337db TH |
3320 | switch (sel) { |
3321 | case ATA_DNXFER_PIO: | |
3322 | highbit = fls(pio_mask) - 1; | |
3323 | pio_mask &= ~(1 << highbit); | |
3324 | break; | |
3325 | ||
3326 | case ATA_DNXFER_DMA: | |
3327 | if (udma_mask) { | |
3328 | highbit = fls(udma_mask) - 1; | |
3329 | udma_mask &= ~(1 << highbit); | |
3330 | if (!udma_mask) | |
3331 | return -ENOENT; | |
3332 | } else if (mwdma_mask) { | |
3333 | highbit = fls(mwdma_mask) - 1; | |
3334 | mwdma_mask &= ~(1 << highbit); | |
3335 | if (!mwdma_mask) | |
3336 | return -ENOENT; | |
3337 | } | |
3338 | break; | |
3339 | ||
3340 | case ATA_DNXFER_40C: | |
3341 | udma_mask &= ATA_UDMA_MASK_40C; | |
3342 | break; | |
3343 | ||
3344 | case ATA_DNXFER_FORCE_PIO0: | |
3345 | pio_mask &= 1; | |
3346 | case ATA_DNXFER_FORCE_PIO: | |
3347 | mwdma_mask = 0; | |
3348 | udma_mask = 0; | |
3349 | break; | |
3350 | ||
458337db TH |
3351 | default: |
3352 | BUG(); | |
3353 | } | |
3354 | ||
3355 | xfer_mask &= ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); | |
3356 | ||
3357 | if (!(xfer_mask & ATA_MASK_PIO) || xfer_mask == orig_mask) | |
3358 | return -ENOENT; | |
3359 | ||
3360 | if (!quiet) { | |
3361 | if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA)) | |
3362 | snprintf(buf, sizeof(buf), "%s:%s", | |
3363 | ata_mode_string(xfer_mask), | |
3364 | ata_mode_string(xfer_mask & ATA_MASK_PIO)); | |
3365 | else | |
3366 | snprintf(buf, sizeof(buf), "%s", | |
3367 | ata_mode_string(xfer_mask)); | |
3368 | ||
a9a79dfe | 3369 | ata_dev_warn(dev, "limiting speed to %s\n", buf); |
458337db | 3370 | } |
cf176e1a TH |
3371 | |
3372 | ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask, | |
3373 | &dev->udma_mask); | |
3374 | ||
cf176e1a | 3375 | return 0; |
cf176e1a TH |
3376 | } |
3377 | ||
3373efd8 | 3378 | static int ata_dev_set_mode(struct ata_device *dev) |
1da177e4 | 3379 | { |
d0cb43b3 | 3380 | struct ata_port *ap = dev->link->ap; |
9af5c9c9 | 3381 | struct ata_eh_context *ehc = &dev->link->eh_context; |
d0cb43b3 | 3382 | const bool nosetxfer = dev->horkage & ATA_HORKAGE_NOSETXFER; |
4055dee7 TH |
3383 | const char *dev_err_whine = ""; |
3384 | int ign_dev_err = 0; | |
d0cb43b3 | 3385 | unsigned int err_mask = 0; |
83206a29 | 3386 | int rc; |
1da177e4 | 3387 | |
e8384607 | 3388 | dev->flags &= ~ATA_DFLAG_PIO; |
1da177e4 LT |
3389 | if (dev->xfer_shift == ATA_SHIFT_PIO) |
3390 | dev->flags |= ATA_DFLAG_PIO; | |
3391 | ||
d0cb43b3 TH |
3392 | if (nosetxfer && ap->flags & ATA_FLAG_SATA && ata_id_is_sata(dev->id)) |
3393 | dev_err_whine = " (SET_XFERMODE skipped)"; | |
3394 | else { | |
3395 | if (nosetxfer) | |
a9a79dfe JP |
3396 | ata_dev_warn(dev, |
3397 | "NOSETXFER but PATA detected - can't " | |
3398 | "skip SETXFER, might malfunction\n"); | |
d0cb43b3 TH |
3399 | err_mask = ata_dev_set_xfermode(dev); |
3400 | } | |
2dcb407e | 3401 | |
4055dee7 TH |
3402 | if (err_mask & ~AC_ERR_DEV) |
3403 | goto fail; | |
3404 | ||
3405 | /* revalidate */ | |
3406 | ehc->i.flags |= ATA_EHI_POST_SETMODE; | |
3407 | rc = ata_dev_revalidate(dev, ATA_DEV_UNKNOWN, 0); | |
3408 | ehc->i.flags &= ~ATA_EHI_POST_SETMODE; | |
3409 | if (rc) | |
3410 | return rc; | |
3411 | ||
b93fda12 AC |
3412 | if (dev->xfer_shift == ATA_SHIFT_PIO) { |
3413 | /* Old CFA may refuse this command, which is just fine */ | |
3414 | if (ata_id_is_cfa(dev->id)) | |
3415 | ign_dev_err = 1; | |
3416 | /* Catch several broken garbage emulations plus some pre | |
3417 | ATA devices */ | |
3418 | if (ata_id_major_version(dev->id) == 0 && | |
3419 | dev->pio_mode <= XFER_PIO_2) | |
3420 | ign_dev_err = 1; | |
3421 | /* Some very old devices and some bad newer ones fail | |
3422 | any kind of SET_XFERMODE request but support PIO0-2 | |
3423 | timings and no IORDY */ | |
3424 | if (!ata_id_has_iordy(dev->id) && dev->pio_mode <= XFER_PIO_2) | |
3425 | ign_dev_err = 1; | |
3426 | } | |
3acaf94b AC |
3427 | /* Early MWDMA devices do DMA but don't allow DMA mode setting. |
3428 | Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */ | |
c5038fc0 | 3429 | if (dev->xfer_shift == ATA_SHIFT_MWDMA && |
3acaf94b AC |
3430 | dev->dma_mode == XFER_MW_DMA_0 && |
3431 | (dev->id[63] >> 8) & 1) | |
4055dee7 | 3432 | ign_dev_err = 1; |
3acaf94b | 3433 | |
4055dee7 TH |
3434 | /* if the device is actually configured correctly, ignore dev err */ |
3435 | if (dev->xfer_mode == ata_xfer_mask2mode(ata_id_xfermask(dev->id))) | |
3436 | ign_dev_err = 1; | |
1da177e4 | 3437 | |
4055dee7 TH |
3438 | if (err_mask & AC_ERR_DEV) { |
3439 | if (!ign_dev_err) | |
3440 | goto fail; | |
3441 | else | |
3442 | dev_err_whine = " (device error ignored)"; | |
3443 | } | |
48a8a14f | 3444 | |
23e71c3d TH |
3445 | DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n", |
3446 | dev->xfer_shift, (int)dev->xfer_mode); | |
1da177e4 | 3447 | |
a9a79dfe JP |
3448 | ata_dev_info(dev, "configured for %s%s\n", |
3449 | ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode)), | |
3450 | dev_err_whine); | |
4055dee7 | 3451 | |
83206a29 | 3452 | return 0; |
4055dee7 TH |
3453 | |
3454 | fail: | |
a9a79dfe | 3455 | ata_dev_err(dev, "failed to set xfermode (err_mask=0x%x)\n", err_mask); |
4055dee7 | 3456 | return -EIO; |
1da177e4 LT |
3457 | } |
3458 | ||
1da177e4 | 3459 | /** |
04351821 | 3460 | * ata_do_set_mode - Program timings and issue SET FEATURES - XFER |
0260731f | 3461 | * @link: link on which timings will be programmed |
1967b7ff | 3462 | * @r_failed_dev: out parameter for failed device |
1da177e4 | 3463 | * |
04351821 A |
3464 | * Standard implementation of the function used to tune and set |
3465 | * ATA device disk transfer mode (PIO3, UDMA6, etc.). If | |
3466 | * ata_dev_set_mode() fails, pointer to the failing device is | |
e82cbdb9 | 3467 | * returned in @r_failed_dev. |
780a87f7 | 3468 | * |
1da177e4 | 3469 | * LOCKING: |
0cba632b | 3470 | * PCI/etc. bus probe sem. |
e82cbdb9 TH |
3471 | * |
3472 | * RETURNS: | |
3473 | * 0 on success, negative errno otherwise | |
1da177e4 | 3474 | */ |
04351821 | 3475 | |
0260731f | 3476 | int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) |
1da177e4 | 3477 | { |
0260731f | 3478 | struct ata_port *ap = link->ap; |
e8e0619f | 3479 | struct ata_device *dev; |
f58229f8 | 3480 | int rc = 0, used_dma = 0, found = 0; |
3adcebb2 | 3481 | |
a6d5a51c | 3482 | /* step 1: calculate xfer_mask */ |
1eca4365 | 3483 | ata_for_each_dev(dev, link, ENABLED) { |
7dc951ae | 3484 | unsigned long pio_mask, dma_mask; |
b3a70601 | 3485 | unsigned int mode_mask; |
a6d5a51c | 3486 | |
b3a70601 AC |
3487 | mode_mask = ATA_DMA_MASK_ATA; |
3488 | if (dev->class == ATA_DEV_ATAPI) | |
3489 | mode_mask = ATA_DMA_MASK_ATAPI; | |
3490 | else if (ata_id_is_cfa(dev->id)) | |
3491 | mode_mask = ATA_DMA_MASK_CFA; | |
3492 | ||
3373efd8 | 3493 | ata_dev_xfermask(dev); |
33267325 | 3494 | ata_force_xfermask(dev); |
1da177e4 | 3495 | |
acf356b1 | 3496 | pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0); |
b3a70601 AC |
3497 | |
3498 | if (libata_dma_mask & mode_mask) | |
80a9c430 SS |
3499 | dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, |
3500 | dev->udma_mask); | |
b3a70601 AC |
3501 | else |
3502 | dma_mask = 0; | |
3503 | ||
acf356b1 TH |
3504 | dev->pio_mode = ata_xfer_mask2mode(pio_mask); |
3505 | dev->dma_mode = ata_xfer_mask2mode(dma_mask); | |
5444a6f4 | 3506 | |
4f65977d | 3507 | found = 1; |
b15b3eba | 3508 | if (ata_dma_enabled(dev)) |
5444a6f4 | 3509 | used_dma = 1; |
a6d5a51c | 3510 | } |
4f65977d | 3511 | if (!found) |
e82cbdb9 | 3512 | goto out; |
a6d5a51c TH |
3513 | |
3514 | /* step 2: always set host PIO timings */ | |
1eca4365 | 3515 | ata_for_each_dev(dev, link, ENABLED) { |
70cd071e | 3516 | if (dev->pio_mode == 0xff) { |
a9a79dfe | 3517 | ata_dev_warn(dev, "no PIO support\n"); |
e8e0619f | 3518 | rc = -EINVAL; |
e82cbdb9 | 3519 | goto out; |
e8e0619f TH |
3520 | } |
3521 | ||
3522 | dev->xfer_mode = dev->pio_mode; | |
3523 | dev->xfer_shift = ATA_SHIFT_PIO; | |
3524 | if (ap->ops->set_piomode) | |
3525 | ap->ops->set_piomode(ap, dev); | |
3526 | } | |
1da177e4 | 3527 | |
a6d5a51c | 3528 | /* step 3: set host DMA timings */ |
1eca4365 TH |
3529 | ata_for_each_dev(dev, link, ENABLED) { |
3530 | if (!ata_dma_enabled(dev)) | |
e8e0619f TH |
3531 | continue; |
3532 | ||
3533 | dev->xfer_mode = dev->dma_mode; | |
3534 | dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode); | |
3535 | if (ap->ops->set_dmamode) | |
3536 | ap->ops->set_dmamode(ap, dev); | |
3537 | } | |
1da177e4 LT |
3538 | |
3539 | /* step 4: update devices' xfer mode */ | |
1eca4365 | 3540 | ata_for_each_dev(dev, link, ENABLED) { |
3373efd8 | 3541 | rc = ata_dev_set_mode(dev); |
5bbc53f4 | 3542 | if (rc) |
e82cbdb9 | 3543 | goto out; |
83206a29 | 3544 | } |
1da177e4 | 3545 | |
e8e0619f TH |
3546 | /* Record simplex status. If we selected DMA then the other |
3547 | * host channels are not permitted to do so. | |
5444a6f4 | 3548 | */ |
cca3974e | 3549 | if (used_dma && (ap->host->flags & ATA_HOST_SIMPLEX)) |
032af1ce | 3550 | ap->host->simplex_claimed = ap; |
5444a6f4 | 3551 | |
e82cbdb9 TH |
3552 | out: |
3553 | if (rc) | |
3554 | *r_failed_dev = dev; | |
3555 | return rc; | |
1da177e4 LT |
3556 | } |
3557 | ||
aa2731ad TH |
3558 | /** |
3559 | * ata_wait_ready - wait for link to become ready | |
3560 | * @link: link to be waited on | |
3561 | * @deadline: deadline jiffies for the operation | |
3562 | * @check_ready: callback to check link readiness | |
3563 | * | |
3564 | * Wait for @link to become ready. @check_ready should return | |
3565 | * positive number if @link is ready, 0 if it isn't, -ENODEV if | |
3566 | * link doesn't seem to be occupied, other errno for other error | |
3567 | * conditions. | |
3568 | * | |
3569 | * Transient -ENODEV conditions are allowed for | |
3570 | * ATA_TMOUT_FF_WAIT. | |
3571 | * | |
3572 | * LOCKING: | |
3573 | * EH context. | |
3574 | * | |
3575 | * RETURNS: | |
c9b5560a | 3576 | * 0 if @link is ready before @deadline; otherwise, -errno. |
aa2731ad TH |
3577 | */ |
3578 | int ata_wait_ready(struct ata_link *link, unsigned long deadline, | |
3579 | int (*check_ready)(struct ata_link *link)) | |
3580 | { | |
3581 | unsigned long start = jiffies; | |
b48d58f5 | 3582 | unsigned long nodev_deadline; |
aa2731ad TH |
3583 | int warned = 0; |
3584 | ||
b48d58f5 TH |
3585 | /* choose which 0xff timeout to use, read comment in libata.h */ |
3586 | if (link->ap->host->flags & ATA_HOST_PARALLEL_SCAN) | |
3587 | nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT_LONG); | |
3588 | else | |
3589 | nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT); | |
3590 | ||
b1c72916 TH |
3591 | /* Slave readiness can't be tested separately from master. On |
3592 | * M/S emulation configuration, this function should be called | |
3593 | * only on the master and it will handle both master and slave. | |
3594 | */ | |
3595 | WARN_ON(link == link->ap->slave_link); | |
3596 | ||
aa2731ad TH |
3597 | if (time_after(nodev_deadline, deadline)) |
3598 | nodev_deadline = deadline; | |
3599 | ||
3600 | while (1) { | |
3601 | unsigned long now = jiffies; | |
3602 | int ready, tmp; | |
3603 | ||
3604 | ready = tmp = check_ready(link); | |
3605 | if (ready > 0) | |
3606 | return 0; | |
3607 | ||
b48d58f5 TH |
3608 | /* |
3609 | * -ENODEV could be transient. Ignore -ENODEV if link | |
aa2731ad | 3610 | * is online. Also, some SATA devices take a long |
b48d58f5 TH |
3611 | * time to clear 0xff after reset. Wait for |
3612 | * ATA_TMOUT_FF_WAIT[_LONG] on -ENODEV if link isn't | |
3613 | * offline. | |
aa2731ad TH |
3614 | * |
3615 | * Note that some PATA controllers (pata_ali) explode | |
3616 | * if status register is read more than once when | |
3617 | * there's no device attached. | |
3618 | */ | |
3619 | if (ready == -ENODEV) { | |
3620 | if (ata_link_online(link)) | |
3621 | ready = 0; | |
3622 | else if ((link->ap->flags & ATA_FLAG_SATA) && | |
3623 | !ata_link_offline(link) && | |
3624 | time_before(now, nodev_deadline)) | |
3625 | ready = 0; | |
3626 | } | |
3627 | ||
3628 | if (ready) | |
3629 | return ready; | |
3630 | if (time_after(now, deadline)) | |
3631 | return -EBUSY; | |
3632 | ||
3633 | if (!warned && time_after(now, start + 5 * HZ) && | |
3634 | (deadline - now > 3 * HZ)) { | |
a9a79dfe | 3635 | ata_link_warn(link, |
aa2731ad TH |
3636 | "link is slow to respond, please be patient " |
3637 | "(ready=%d)\n", tmp); | |
3638 | warned = 1; | |
3639 | } | |
3640 | ||
97750ceb | 3641 | ata_msleep(link->ap, 50); |
aa2731ad TH |
3642 | } |
3643 | } | |
3644 | ||
3645 | /** | |
3646 | * ata_wait_after_reset - wait for link to become ready after reset | |
3647 | * @link: link to be waited on | |
3648 | * @deadline: deadline jiffies for the operation | |
3649 | * @check_ready: callback to check link readiness | |
3650 | * | |
3651 | * Wait for @link to become ready after reset. | |
3652 | * | |
3653 | * LOCKING: | |
3654 | * EH context. | |
3655 | * | |
3656 | * RETURNS: | |
c9b5560a | 3657 | * 0 if @link is ready before @deadline; otherwise, -errno. |
aa2731ad | 3658 | */ |
2b4221bb | 3659 | int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, |
aa2731ad TH |
3660 | int (*check_ready)(struct ata_link *link)) |
3661 | { | |
97750ceb | 3662 | ata_msleep(link->ap, ATA_WAIT_AFTER_RESET); |
aa2731ad TH |
3663 | |
3664 | return ata_wait_ready(link, deadline, check_ready); | |
3665 | } | |
3666 | ||
d7bb4cc7 | 3667 | /** |
936fd732 TH |
3668 | * sata_link_debounce - debounce SATA phy status |
3669 | * @link: ATA link to debounce SATA phy status for | |
c9b5560a | 3670 | * @params: timing parameters { interval, duration, timeout } in msec |
d4b2bab4 | 3671 | * @deadline: deadline jiffies for the operation |
d7bb4cc7 | 3672 | * |
1152b261 | 3673 | * Make sure SStatus of @link reaches stable state, determined by |
d7bb4cc7 TH |
3674 | * holding the same value where DET is not 1 for @duration polled |
3675 | * every @interval, before @timeout. Timeout constraints the | |
d4b2bab4 TH |
3676 | * beginning of the stable state. Because DET gets stuck at 1 on |
3677 | * some controllers after hot unplugging, this functions waits | |
d7bb4cc7 TH |
3678 | * until timeout then returns 0 if DET is stable at 1. |
3679 | * | |
d4b2bab4 TH |
3680 | * @timeout is further limited by @deadline. The sooner of the |
3681 | * two is used. | |
3682 | * | |
d7bb4cc7 TH |
3683 | * LOCKING: |
3684 | * Kernel thread context (may sleep) | |
3685 | * | |
3686 | * RETURNS: | |
3687 | * 0 on success, -errno on failure. | |
3688 | */ | |
936fd732 TH |
3689 | int sata_link_debounce(struct ata_link *link, const unsigned long *params, |
3690 | unsigned long deadline) | |
7a7921e8 | 3691 | { |
341c2c95 TH |
3692 | unsigned long interval = params[0]; |
3693 | unsigned long duration = params[1]; | |
d4b2bab4 | 3694 | unsigned long last_jiffies, t; |
d7bb4cc7 TH |
3695 | u32 last, cur; |
3696 | int rc; | |
3697 | ||
341c2c95 | 3698 | t = ata_deadline(jiffies, params[2]); |
d4b2bab4 TH |
3699 | if (time_before(t, deadline)) |
3700 | deadline = t; | |
3701 | ||
936fd732 | 3702 | if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) |
d7bb4cc7 TH |
3703 | return rc; |
3704 | cur &= 0xf; | |
3705 | ||
3706 | last = cur; | |
3707 | last_jiffies = jiffies; | |
3708 | ||
3709 | while (1) { | |
97750ceb | 3710 | ata_msleep(link->ap, interval); |
936fd732 | 3711 | if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) |
d7bb4cc7 TH |
3712 | return rc; |
3713 | cur &= 0xf; | |
3714 | ||
3715 | /* DET stable? */ | |
3716 | if (cur == last) { | |
d4b2bab4 | 3717 | if (cur == 1 && time_before(jiffies, deadline)) |
d7bb4cc7 | 3718 | continue; |
341c2c95 TH |
3719 | if (time_after(jiffies, |
3720 | ata_deadline(last_jiffies, duration))) | |
d7bb4cc7 TH |
3721 | return 0; |
3722 | continue; | |
3723 | } | |
3724 | ||
3725 | /* unstable, start over */ | |
3726 | last = cur; | |
3727 | last_jiffies = jiffies; | |
3728 | ||
f1545154 TH |
3729 | /* Check deadline. If debouncing failed, return |
3730 | * -EPIPE to tell upper layer to lower link speed. | |
3731 | */ | |
d4b2bab4 | 3732 | if (time_after(jiffies, deadline)) |
f1545154 | 3733 | return -EPIPE; |
d7bb4cc7 TH |
3734 | } |
3735 | } | |
3736 | ||
3737 | /** | |
936fd732 TH |
3738 | * sata_link_resume - resume SATA link |
3739 | * @link: ATA link to resume SATA | |
c9b5560a | 3740 | * @params: timing parameters { interval, duration, timeout } in msec |
d4b2bab4 | 3741 | * @deadline: deadline jiffies for the operation |
d7bb4cc7 | 3742 | * |
936fd732 | 3743 | * Resume SATA phy @link and debounce it. |
d7bb4cc7 TH |
3744 | * |
3745 | * LOCKING: | |
3746 | * Kernel thread context (may sleep) | |
3747 | * | |
3748 | * RETURNS: | |
3749 | * 0 on success, -errno on failure. | |
3750 | */ | |
936fd732 TH |
3751 | int sata_link_resume(struct ata_link *link, const unsigned long *params, |
3752 | unsigned long deadline) | |
d7bb4cc7 | 3753 | { |
5040ab67 | 3754 | int tries = ATA_LINK_RESUME_TRIES; |
ac371987 | 3755 | u32 scontrol, serror; |
81952c54 TH |
3756 | int rc; |
3757 | ||
936fd732 | 3758 | if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) |
81952c54 | 3759 | return rc; |
7a7921e8 | 3760 | |
5040ab67 TH |
3761 | /* |
3762 | * Writes to SControl sometimes get ignored under certain | |
3763 | * controllers (ata_piix SIDPR). Make sure DET actually is | |
3764 | * cleared. | |
3765 | */ | |
3766 | do { | |
3767 | scontrol = (scontrol & 0x0f0) | 0x300; | |
3768 | if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) | |
3769 | return rc; | |
3770 | /* | |
3771 | * Some PHYs react badly if SStatus is pounded | |
3772 | * immediately after resuming. Delay 200ms before | |
3773 | * debouncing. | |
3774 | */ | |
e39b2bb3 DP |
3775 | if (!(link->flags & ATA_LFLAG_NO_DB_DELAY)) |
3776 | ata_msleep(link->ap, 200); | |
81952c54 | 3777 | |
5040ab67 TH |
3778 | /* is SControl restored correctly? */ |
3779 | if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) | |
3780 | return rc; | |
3781 | } while ((scontrol & 0xf0f) != 0x300 && --tries); | |
7a7921e8 | 3782 | |
5040ab67 | 3783 | if ((scontrol & 0xf0f) != 0x300) { |
38941c95 | 3784 | ata_link_warn(link, "failed to resume link (SControl %X)\n", |
a9a79dfe | 3785 | scontrol); |
5040ab67 TH |
3786 | return 0; |
3787 | } | |
3788 | ||
3789 | if (tries < ATA_LINK_RESUME_TRIES) | |
a9a79dfe JP |
3790 | ata_link_warn(link, "link resume succeeded after %d retries\n", |
3791 | ATA_LINK_RESUME_TRIES - tries); | |
7a7921e8 | 3792 | |
ac371987 TH |
3793 | if ((rc = sata_link_debounce(link, params, deadline))) |
3794 | return rc; | |
3795 | ||
f046519f | 3796 | /* clear SError, some PHYs require this even for SRST to work */ |
ac371987 TH |
3797 | if (!(rc = sata_scr_read(link, SCR_ERROR, &serror))) |
3798 | rc = sata_scr_write(link, SCR_ERROR, serror); | |
ac371987 | 3799 | |
f046519f | 3800 | return rc != -EINVAL ? rc : 0; |
7a7921e8 TH |
3801 | } |
3802 | ||
1152b261 TH |
3803 | /** |
3804 | * sata_link_scr_lpm - manipulate SControl IPM and SPM fields | |
3805 | * @link: ATA link to manipulate SControl for | |
3806 | * @policy: LPM policy to configure | |
3807 | * @spm_wakeup: initiate LPM transition to active state | |
3808 | * | |
3809 | * Manipulate the IPM field of the SControl register of @link | |
3810 | * according to @policy. If @policy is ATA_LPM_MAX_POWER and | |
3811 | * @spm_wakeup is %true, the SPM field is manipulated to wake up | |
3812 | * the link. This function also clears PHYRDY_CHG before | |
3813 | * returning. | |
3814 | * | |
3815 | * LOCKING: | |
3816 | * EH context. | |
3817 | * | |
3818 | * RETURNS: | |
8485187b | 3819 | * 0 on success, -errno otherwise. |
1152b261 TH |
3820 | */ |
3821 | int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, | |
3822 | bool spm_wakeup) | |
3823 | { | |
3824 | struct ata_eh_context *ehc = &link->eh_context; | |
3825 | bool woken_up = false; | |
3826 | u32 scontrol; | |
3827 | int rc; | |
3828 | ||
3829 | rc = sata_scr_read(link, SCR_CONTROL, &scontrol); | |
3830 | if (rc) | |
3831 | return rc; | |
3832 | ||
3833 | switch (policy) { | |
3834 | case ATA_LPM_MAX_POWER: | |
3835 | /* disable all LPM transitions */ | |
65fe1f0f | 3836 | scontrol |= (0x7 << 8); |
1152b261 TH |
3837 | /* initiate transition to active state */ |
3838 | if (spm_wakeup) { | |
3839 | scontrol |= (0x4 << 12); | |
3840 | woken_up = true; | |
3841 | } | |
3842 | break; | |
3843 | case ATA_LPM_MED_POWER: | |
3844 | /* allow LPM to PARTIAL */ | |
3845 | scontrol &= ~(0x1 << 8); | |
65fe1f0f | 3846 | scontrol |= (0x6 << 8); |
1152b261 TH |
3847 | break; |
3848 | case ATA_LPM_MIN_POWER: | |
8a745f1f KCA |
3849 | if (ata_link_nr_enabled(link) > 0) |
3850 | /* no restrictions on LPM transitions */ | |
65fe1f0f | 3851 | scontrol &= ~(0x7 << 8); |
8a745f1f KCA |
3852 | else { |
3853 | /* empty port, power off */ | |
3854 | scontrol &= ~0xf; | |
3855 | scontrol |= (0x1 << 2); | |
3856 | } | |
1152b261 TH |
3857 | break; |
3858 | default: | |
3859 | WARN_ON(1); | |
3860 | } | |
3861 | ||
3862 | rc = sata_scr_write(link, SCR_CONTROL, scontrol); | |
3863 | if (rc) | |
3864 | return rc; | |
3865 | ||
3866 | /* give the link time to transit out of LPM state */ | |
3867 | if (woken_up) | |
3868 | msleep(10); | |
3869 | ||
3870 | /* clear PHYRDY_CHG from SError */ | |
3871 | ehc->i.serror &= ~SERR_PHYRDY_CHG; | |
3872 | return sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG); | |
3873 | } | |
3874 | ||
f5914a46 | 3875 | /** |
0aa1113d | 3876 | * ata_std_prereset - prepare for reset |
cc0680a5 | 3877 | * @link: ATA link to be reset |
d4b2bab4 | 3878 | * @deadline: deadline jiffies for the operation |
f5914a46 | 3879 | * |
cc0680a5 | 3880 | * @link is about to be reset. Initialize it. Failure from |
b8cffc6a TH |
3881 | * prereset makes libata abort whole reset sequence and give up |
3882 | * that port, so prereset should be best-effort. It does its | |
3883 | * best to prepare for reset sequence but if things go wrong, it | |
3884 | * should just whine, not fail. | |
f5914a46 TH |
3885 | * |
3886 | * LOCKING: | |
3887 | * Kernel thread context (may sleep) | |
3888 | * | |
3889 | * RETURNS: | |
3890 | * 0 on success, -errno otherwise. | |
3891 | */ | |
0aa1113d | 3892 | int ata_std_prereset(struct ata_link *link, unsigned long deadline) |
f5914a46 | 3893 | { |
cc0680a5 | 3894 | struct ata_port *ap = link->ap; |
936fd732 | 3895 | struct ata_eh_context *ehc = &link->eh_context; |
e9c83914 | 3896 | const unsigned long *timing = sata_ehc_deb_timing(ehc); |
f5914a46 TH |
3897 | int rc; |
3898 | ||
f5914a46 TH |
3899 | /* if we're about to do hardreset, nothing more to do */ |
3900 | if (ehc->i.action & ATA_EH_HARDRESET) | |
3901 | return 0; | |
3902 | ||
936fd732 | 3903 | /* if SATA, resume link */ |
a16abc0b | 3904 | if (ap->flags & ATA_FLAG_SATA) { |
936fd732 | 3905 | rc = sata_link_resume(link, timing, deadline); |
b8cffc6a TH |
3906 | /* whine about phy resume failure but proceed */ |
3907 | if (rc && rc != -EOPNOTSUPP) | |
a9a79dfe JP |
3908 | ata_link_warn(link, |
3909 | "failed to resume link for reset (errno=%d)\n", | |
3910 | rc); | |
f5914a46 TH |
3911 | } |
3912 | ||
45db2f6c | 3913 | /* no point in trying softreset on offline link */ |
b1c72916 | 3914 | if (ata_phys_link_offline(link)) |
45db2f6c TH |
3915 | ehc->i.action &= ~ATA_EH_SOFTRESET; |
3916 | ||
f5914a46 TH |
3917 | return 0; |
3918 | } | |
3919 | ||
c2bd5804 | 3920 | /** |
624d5c51 TH |
3921 | * sata_link_hardreset - reset link via SATA phy reset |
3922 | * @link: link to reset | |
c9b5560a | 3923 | * @timing: timing parameters { interval, duration, timeout } in msec |
d4b2bab4 | 3924 | * @deadline: deadline jiffies for the operation |
9dadd45b TH |
3925 | * @online: optional out parameter indicating link onlineness |
3926 | * @check_ready: optional callback to check link readiness | |
c2bd5804 | 3927 | * |
624d5c51 | 3928 | * SATA phy-reset @link using DET bits of SControl register. |
9dadd45b TH |
3929 | * After hardreset, link readiness is waited upon using |
3930 | * ata_wait_ready() if @check_ready is specified. LLDs are | |
3931 | * allowed to not specify @check_ready and wait itself after this | |
3932 | * function returns. Device classification is LLD's | |
3933 | * responsibility. | |
3934 | * | |
3935 | * *@online is set to one iff reset succeeded and @link is online | |
3936 | * after reset. | |
c2bd5804 TH |
3937 | * |
3938 | * LOCKING: | |
3939 | * Kernel thread context (may sleep) | |
3940 | * | |
3941 | * RETURNS: | |
3942 | * 0 on success, -errno otherwise. | |
3943 | */ | |
624d5c51 | 3944 | int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, |
9dadd45b TH |
3945 | unsigned long deadline, |
3946 | bool *online, int (*check_ready)(struct ata_link *)) | |
c2bd5804 | 3947 | { |
624d5c51 | 3948 | u32 scontrol; |
81952c54 | 3949 | int rc; |
852ee16a | 3950 | |
c2bd5804 TH |
3951 | DPRINTK("ENTER\n"); |
3952 | ||
9dadd45b TH |
3953 | if (online) |
3954 | *online = false; | |
3955 | ||
936fd732 | 3956 | if (sata_set_spd_needed(link)) { |
1c3fae4d TH |
3957 | /* SATA spec says nothing about how to reconfigure |
3958 | * spd. To be on the safe side, turn off phy during | |
3959 | * reconfiguration. This works for at least ICH7 AHCI | |
3960 | * and Sil3124. | |
3961 | */ | |
936fd732 | 3962 | if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) |
b6103f6d | 3963 | goto out; |
81952c54 | 3964 | |
a34b6fc0 | 3965 | scontrol = (scontrol & 0x0f0) | 0x304; |
81952c54 | 3966 | |
936fd732 | 3967 | if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) |
b6103f6d | 3968 | goto out; |
1c3fae4d | 3969 | |
936fd732 | 3970 | sata_set_spd(link); |
1c3fae4d TH |
3971 | } |
3972 | ||
3973 | /* issue phy wake/reset */ | |
936fd732 | 3974 | if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) |
b6103f6d | 3975 | goto out; |
81952c54 | 3976 | |
852ee16a | 3977 | scontrol = (scontrol & 0x0f0) | 0x301; |
81952c54 | 3978 | |
936fd732 | 3979 | if ((rc = sata_scr_write_flush(link, SCR_CONTROL, scontrol))) |
b6103f6d | 3980 | goto out; |
c2bd5804 | 3981 | |
1c3fae4d | 3982 | /* Couldn't find anything in SATA I/II specs, but AHCI-1.1 |
c2bd5804 TH |
3983 | * 10.4.2 says at least 1 ms. |
3984 | */ | |
97750ceb | 3985 | ata_msleep(link->ap, 1); |
c2bd5804 | 3986 | |
936fd732 TH |
3987 | /* bring link back */ |
3988 | rc = sata_link_resume(link, timing, deadline); | |
9dadd45b TH |
3989 | if (rc) |
3990 | goto out; | |
3991 | /* if link is offline nothing more to do */ | |
b1c72916 | 3992 | if (ata_phys_link_offline(link)) |
9dadd45b TH |
3993 | goto out; |
3994 | ||
3995 | /* Link is online. From this point, -ENODEV too is an error. */ | |
3996 | if (online) | |
3997 | *online = true; | |
3998 | ||
071f44b1 | 3999 | if (sata_pmp_supported(link->ap) && ata_is_host_link(link)) { |
9dadd45b TH |
4000 | /* If PMP is supported, we have to do follow-up SRST. |
4001 | * Some PMPs don't send D2H Reg FIS after hardreset if | |
4002 | * the first port is empty. Wait only for | |
4003 | * ATA_TMOUT_PMP_SRST_WAIT. | |
4004 | */ | |
4005 | if (check_ready) { | |
4006 | unsigned long pmp_deadline; | |
4007 | ||
341c2c95 TH |
4008 | pmp_deadline = ata_deadline(jiffies, |
4009 | ATA_TMOUT_PMP_SRST_WAIT); | |
9dadd45b TH |
4010 | if (time_after(pmp_deadline, deadline)) |
4011 | pmp_deadline = deadline; | |
4012 | ata_wait_ready(link, pmp_deadline, check_ready); | |
4013 | } | |
4014 | rc = -EAGAIN; | |
4015 | goto out; | |
4016 | } | |
4017 | ||
4018 | rc = 0; | |
4019 | if (check_ready) | |
4020 | rc = ata_wait_ready(link, deadline, check_ready); | |
b6103f6d | 4021 | out: |
0cbf0711 TH |
4022 | if (rc && rc != -EAGAIN) { |
4023 | /* online is set iff link is online && reset succeeded */ | |
4024 | if (online) | |
4025 | *online = false; | |
a9a79dfe | 4026 | ata_link_err(link, "COMRESET failed (errno=%d)\n", rc); |
0cbf0711 | 4027 | } |
b6103f6d TH |
4028 | DPRINTK("EXIT, rc=%d\n", rc); |
4029 | return rc; | |
4030 | } | |
4031 | ||
57c9efdf TH |
4032 | /** |
4033 | * sata_std_hardreset - COMRESET w/o waiting or classification | |
4034 | * @link: link to reset | |
4035 | * @class: resulting class of attached device | |
4036 | * @deadline: deadline jiffies for the operation | |
4037 | * | |
4038 | * Standard SATA COMRESET w/o waiting or classification. | |
4039 | * | |
4040 | * LOCKING: | |
4041 | * Kernel thread context (may sleep) | |
4042 | * | |
4043 | * RETURNS: | |
4044 | * 0 if link offline, -EAGAIN if link online, -errno on errors. | |
4045 | */ | |
4046 | int sata_std_hardreset(struct ata_link *link, unsigned int *class, | |
4047 | unsigned long deadline) | |
4048 | { | |
4049 | const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); | |
4050 | bool online; | |
4051 | int rc; | |
4052 | ||
4053 | /* do hardreset */ | |
4054 | rc = sata_link_hardreset(link, timing, deadline, &online, NULL); | |
57c9efdf TH |
4055 | return online ? -EAGAIN : rc; |
4056 | } | |
4057 | ||
c2bd5804 | 4058 | /** |
203c75b8 | 4059 | * ata_std_postreset - standard postreset callback |
cc0680a5 | 4060 | * @link: the target ata_link |
c2bd5804 TH |
4061 | * @classes: classes of attached devices |
4062 | * | |
4063 | * This function is invoked after a successful reset. Note that | |
4064 | * the device might have been reset more than once using | |
4065 | * different reset methods before postreset is invoked. | |
c2bd5804 | 4066 | * |
c2bd5804 TH |
4067 | * LOCKING: |
4068 | * Kernel thread context (may sleep) | |
4069 | */ | |
203c75b8 | 4070 | void ata_std_postreset(struct ata_link *link, unsigned int *classes) |
c2bd5804 | 4071 | { |
f046519f TH |
4072 | u32 serror; |
4073 | ||
c2bd5804 TH |
4074 | DPRINTK("ENTER\n"); |
4075 | ||
f046519f TH |
4076 | /* reset complete, clear SError */ |
4077 | if (!sata_scr_read(link, SCR_ERROR, &serror)) | |
4078 | sata_scr_write(link, SCR_ERROR, serror); | |
4079 | ||
c2bd5804 | 4080 | /* print link status */ |
936fd732 | 4081 | sata_print_link_status(link); |
c2bd5804 | 4082 | |
c2bd5804 TH |
4083 | DPRINTK("EXIT\n"); |
4084 | } | |
4085 | ||
623a3128 TH |
4086 | /** |
4087 | * ata_dev_same_device - Determine whether new ID matches configured device | |
623a3128 TH |
4088 | * @dev: device to compare against |
4089 | * @new_class: class of the new device | |
4090 | * @new_id: IDENTIFY page of the new device | |
4091 | * | |
4092 | * Compare @new_class and @new_id against @dev and determine | |
4093 | * whether @dev is the device indicated by @new_class and | |
4094 | * @new_id. | |
4095 | * | |
4096 | * LOCKING: | |
4097 | * None. | |
4098 | * | |
4099 | * RETURNS: | |
4100 | * 1 if @dev matches @new_class and @new_id, 0 otherwise. | |
4101 | */ | |
3373efd8 TH |
4102 | static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, |
4103 | const u16 *new_id) | |
623a3128 TH |
4104 | { |
4105 | const u16 *old_id = dev->id; | |
a0cf733b TH |
4106 | unsigned char model[2][ATA_ID_PROD_LEN + 1]; |
4107 | unsigned char serial[2][ATA_ID_SERNO_LEN + 1]; | |
623a3128 TH |
4108 | |
4109 | if (dev->class != new_class) { | |
a9a79dfe JP |
4110 | ata_dev_info(dev, "class mismatch %d != %d\n", |
4111 | dev->class, new_class); | |
623a3128 TH |
4112 | return 0; |
4113 | } | |
4114 | ||
a0cf733b TH |
4115 | ata_id_c_string(old_id, model[0], ATA_ID_PROD, sizeof(model[0])); |
4116 | ata_id_c_string(new_id, model[1], ATA_ID_PROD, sizeof(model[1])); | |
4117 | ata_id_c_string(old_id, serial[0], ATA_ID_SERNO, sizeof(serial[0])); | |
4118 | ata_id_c_string(new_id, serial[1], ATA_ID_SERNO, sizeof(serial[1])); | |
623a3128 TH |
4119 | |
4120 | if (strcmp(model[0], model[1])) { | |
a9a79dfe JP |
4121 | ata_dev_info(dev, "model number mismatch '%s' != '%s'\n", |
4122 | model[0], model[1]); | |
623a3128 TH |
4123 | return 0; |
4124 | } | |
4125 | ||
4126 | if (strcmp(serial[0], serial[1])) { | |
a9a79dfe JP |
4127 | ata_dev_info(dev, "serial number mismatch '%s' != '%s'\n", |
4128 | serial[0], serial[1]); | |
623a3128 TH |
4129 | return 0; |
4130 | } | |
4131 | ||
623a3128 TH |
4132 | return 1; |
4133 | } | |
4134 | ||
4135 | /** | |
fe30911b | 4136 | * ata_dev_reread_id - Re-read IDENTIFY data |
3fae450c | 4137 | * @dev: target ATA device |
bff04647 | 4138 | * @readid_flags: read ID flags |
623a3128 TH |
4139 | * |
4140 | * Re-read IDENTIFY page and make sure @dev is still attached to | |
4141 | * the port. | |
4142 | * | |
4143 | * LOCKING: | |
4144 | * Kernel thread context (may sleep) | |
4145 | * | |
4146 | * RETURNS: | |
4147 | * 0 on success, negative errno otherwise | |
4148 | */ | |
fe30911b | 4149 | int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags) |
623a3128 | 4150 | { |
5eb45c02 | 4151 | unsigned int class = dev->class; |
9af5c9c9 | 4152 | u16 *id = (void *)dev->link->ap->sector_buf; |
623a3128 TH |
4153 | int rc; |
4154 | ||
fe635c7e | 4155 | /* read ID data */ |
bff04647 | 4156 | rc = ata_dev_read_id(dev, &class, readid_flags, id); |
623a3128 | 4157 | if (rc) |
fe30911b | 4158 | return rc; |
623a3128 TH |
4159 | |
4160 | /* is the device still there? */ | |
fe30911b TH |
4161 | if (!ata_dev_same_device(dev, class, id)) |
4162 | return -ENODEV; | |
623a3128 | 4163 | |
fe635c7e | 4164 | memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS); |
fe30911b TH |
4165 | return 0; |
4166 | } | |
4167 | ||
4168 | /** | |
4169 | * ata_dev_revalidate - Revalidate ATA device | |
4170 | * @dev: device to revalidate | |
422c9daa | 4171 | * @new_class: new class code |
fe30911b TH |
4172 | * @readid_flags: read ID flags |
4173 | * | |
4174 | * Re-read IDENTIFY page, make sure @dev is still attached to the | |
4175 | * port and reconfigure it according to the new IDENTIFY page. | |
4176 | * | |
4177 | * LOCKING: | |
4178 | * Kernel thread context (may sleep) | |
4179 | * | |
4180 | * RETURNS: | |
4181 | * 0 on success, negative errno otherwise | |
4182 | */ | |
422c9daa TH |
4183 | int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class, |
4184 | unsigned int readid_flags) | |
fe30911b | 4185 | { |
6ddcd3b0 | 4186 | u64 n_sectors = dev->n_sectors; |
5920dadf | 4187 | u64 n_native_sectors = dev->n_native_sectors; |
fe30911b TH |
4188 | int rc; |
4189 | ||
4190 | if (!ata_dev_enabled(dev)) | |
4191 | return -ENODEV; | |
4192 | ||
422c9daa TH |
4193 | /* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */ |
4194 | if (ata_class_enabled(new_class) && | |
f0d0613d BP |
4195 | new_class != ATA_DEV_ATA && |
4196 | new_class != ATA_DEV_ATAPI && | |
9162c657 | 4197 | new_class != ATA_DEV_ZAC && |
f0d0613d | 4198 | new_class != ATA_DEV_SEMB) { |
a9a79dfe JP |
4199 | ata_dev_info(dev, "class mismatch %u != %u\n", |
4200 | dev->class, new_class); | |
422c9daa TH |
4201 | rc = -ENODEV; |
4202 | goto fail; | |
4203 | } | |
4204 | ||
fe30911b TH |
4205 | /* re-read ID */ |
4206 | rc = ata_dev_reread_id(dev, readid_flags); | |
4207 | if (rc) | |
4208 | goto fail; | |
623a3128 TH |
4209 | |
4210 | /* configure device according to the new ID */ | |
efdaedc4 | 4211 | rc = ata_dev_configure(dev); |
6ddcd3b0 TH |
4212 | if (rc) |
4213 | goto fail; | |
4214 | ||
4215 | /* verify n_sectors hasn't changed */ | |
445d211b TH |
4216 | if (dev->class != ATA_DEV_ATA || !n_sectors || |
4217 | dev->n_sectors == n_sectors) | |
4218 | return 0; | |
4219 | ||
4220 | /* n_sectors has changed */ | |
a9a79dfe JP |
4221 | ata_dev_warn(dev, "n_sectors mismatch %llu != %llu\n", |
4222 | (unsigned long long)n_sectors, | |
4223 | (unsigned long long)dev->n_sectors); | |
445d211b TH |
4224 | |
4225 | /* | |
4226 | * Something could have caused HPA to be unlocked | |
4227 | * involuntarily. If n_native_sectors hasn't changed and the | |
4228 | * new size matches it, keep the device. | |
4229 | */ | |
4230 | if (dev->n_native_sectors == n_native_sectors && | |
4231 | dev->n_sectors > n_sectors && dev->n_sectors == n_native_sectors) { | |
a9a79dfe JP |
4232 | ata_dev_warn(dev, |
4233 | "new n_sectors matches native, probably " | |
4234 | "late HPA unlock, n_sectors updated\n"); | |
68939ce5 | 4235 | /* use the larger n_sectors */ |
445d211b | 4236 | return 0; |
6ddcd3b0 TH |
4237 | } |
4238 | ||
445d211b TH |
4239 | /* |
4240 | * Some BIOSes boot w/o HPA but resume w/ HPA locked. Try | |
4241 | * unlocking HPA in those cases. | |
4242 | * | |
4243 | * https://bugzilla.kernel.org/show_bug.cgi?id=15396 | |
4244 | */ | |
4245 | if (dev->n_native_sectors == n_native_sectors && | |
4246 | dev->n_sectors < n_sectors && n_sectors == n_native_sectors && | |
4247 | !(dev->horkage & ATA_HORKAGE_BROKEN_HPA)) { | |
a9a79dfe JP |
4248 | ata_dev_warn(dev, |
4249 | "old n_sectors matches native, probably " | |
4250 | "late HPA lock, will try to unlock HPA\n"); | |
445d211b TH |
4251 | /* try unlocking HPA */ |
4252 | dev->flags |= ATA_DFLAG_UNLOCK_HPA; | |
4253 | rc = -EIO; | |
4254 | } else | |
4255 | rc = -ENODEV; | |
623a3128 | 4256 | |
445d211b TH |
4257 | /* restore original n_[native_]sectors and fail */ |
4258 | dev->n_native_sectors = n_native_sectors; | |
4259 | dev->n_sectors = n_sectors; | |
623a3128 | 4260 | fail: |
a9a79dfe | 4261 | ata_dev_err(dev, "revalidation failed (errno=%d)\n", rc); |
623a3128 TH |
4262 | return rc; |
4263 | } | |
4264 | ||
6919a0a6 AC |
4265 | struct ata_blacklist_entry { |
4266 | const char *model_num; | |
4267 | const char *model_rev; | |
4268 | unsigned long horkage; | |
4269 | }; | |
4270 | ||
4271 | static const struct ata_blacklist_entry ata_device_blacklist [] = { | |
4272 | /* Devices with DMA related problems under Linux */ | |
4273 | { "WDC AC11000H", NULL, ATA_HORKAGE_NODMA }, | |
4274 | { "WDC AC22100H", NULL, ATA_HORKAGE_NODMA }, | |
4275 | { "WDC AC32500H", NULL, ATA_HORKAGE_NODMA }, | |
4276 | { "WDC AC33100H", NULL, ATA_HORKAGE_NODMA }, | |
4277 | { "WDC AC31600H", NULL, ATA_HORKAGE_NODMA }, | |
4278 | { "WDC AC32100H", "24.09P07", ATA_HORKAGE_NODMA }, | |
4279 | { "WDC AC23200L", "21.10N21", ATA_HORKAGE_NODMA }, | |
4280 | { "Compaq CRD-8241B", NULL, ATA_HORKAGE_NODMA }, | |
4281 | { "CRD-8400B", NULL, ATA_HORKAGE_NODMA }, | |
7da4c935 | 4282 | { "CRD-848[02]B", NULL, ATA_HORKAGE_NODMA }, |
6919a0a6 AC |
4283 | { "CRD-84", NULL, ATA_HORKAGE_NODMA }, |
4284 | { "SanDisk SDP3B", NULL, ATA_HORKAGE_NODMA }, | |
4285 | { "SanDisk SDP3B-64", NULL, ATA_HORKAGE_NODMA }, | |
4286 | { "SANYO CD-ROM CRD", NULL, ATA_HORKAGE_NODMA }, | |
4287 | { "HITACHI CDR-8", NULL, ATA_HORKAGE_NODMA }, | |
7da4c935 | 4288 | { "HITACHI CDR-8[34]35",NULL, ATA_HORKAGE_NODMA }, |
6919a0a6 AC |
4289 | { "Toshiba CD-ROM XM-6202B", NULL, ATA_HORKAGE_NODMA }, |
4290 | { "TOSHIBA CD-ROM XM-1702BC", NULL, ATA_HORKAGE_NODMA }, | |
4291 | { "CD-532E-A", NULL, ATA_HORKAGE_NODMA }, | |
4292 | { "E-IDE CD-ROM CR-840",NULL, ATA_HORKAGE_NODMA }, | |
4293 | { "CD-ROM Drive/F5A", NULL, ATA_HORKAGE_NODMA }, | |
4294 | { "WPI CDD-820", NULL, ATA_HORKAGE_NODMA }, | |
4295 | { "SAMSUNG CD-ROM SC-148C", NULL, ATA_HORKAGE_NODMA }, | |
4296 | { "SAMSUNG CD-ROM SC", NULL, ATA_HORKAGE_NODMA }, | |
6919a0a6 AC |
4297 | { "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA }, |
4298 | { "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA }, | |
2dcb407e | 4299 | { "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA }, |
39f19886 | 4300 | { "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA }, |
d17d794c | 4301 | { " 2GB ATA Flash Disk", "ADMA428M", ATA_HORKAGE_NODMA }, |
b00622fc | 4302 | { "VRFDFC22048UCHC-TE*", NULL, ATA_HORKAGE_NODMA }, |
3af9a77a | 4303 | /* Odd clown on sil3726/4726 PMPs */ |
50af2fa1 | 4304 | { "Config Disk", NULL, ATA_HORKAGE_DISABLE }, |
6919a0a6 | 4305 | |
18d6e9d5 | 4306 | /* Weird ATAPI devices */ |
40a1d531 | 4307 | { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 }, |
6a87e42e | 4308 | { "QUANTUM DAT DAT72-000", NULL, ATA_HORKAGE_ATAPI_MOD16_DMA }, |
a32450e1 | 4309 | { "Slimtype DVD A DS8A8SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 }, |
0523f037 | 4310 | { "Slimtype DVD A DS8A9SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 }, |
18d6e9d5 | 4311 | |
af34d637 DM |
4312 | /* |
4313 | * Causes silent data corruption with higher max sects. | |
4314 | * http://lkml.kernel.org/g/x49wpy40ysk.fsf@segfault.boston.devel.redhat.com | |
4315 | */ | |
4316 | { "ST380013AS", "3.20", ATA_HORKAGE_MAX_SEC_1024 }, | |
1488a1e3 TH |
4317 | |
4318 | /* | |
4319 | * Device times out with higher max sects. | |
4320 | * https://bugzilla.kernel.org/show_bug.cgi?id=121671 | |
4321 | */ | |
4322 | { "LITEON CX1-JB256-HP", NULL, ATA_HORKAGE_MAX_SEC_1024 }, | |
af34d637 | 4323 | |
6919a0a6 AC |
4324 | /* Devices we expect to fail diagnostics */ |
4325 | ||
4326 | /* Devices where NCQ should be avoided */ | |
4327 | /* NCQ is slow */ | |
2dcb407e | 4328 | { "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ }, |
459ad688 | 4329 | { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, }, |
09125ea6 TH |
4330 | /* http://thread.gmane.org/gmane.linux.ide/14907 */ |
4331 | { "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ }, | |
7acfaf30 | 4332 | /* NCQ is broken */ |
539cc7c7 | 4333 | { "Maxtor *", "BANC*", ATA_HORKAGE_NONCQ }, |
0e3dbc01 | 4334 | { "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ }, |
da6f0ec2 | 4335 | { "ST380817AS", "3.42", ATA_HORKAGE_NONCQ }, |
e41bd3e8 | 4336 | { "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ }, |
5ccfca97 | 4337 | { "OCZ CORE_SSD", "02.10104", ATA_HORKAGE_NONCQ }, |
539cc7c7 | 4338 | |
ac70a964 | 4339 | /* Seagate NCQ + FLUSH CACHE firmware bug */ |
4d1f9082 | 4340 | { "ST31500341AS", "SD1[5-9]", ATA_HORKAGE_NONCQ | |
ac70a964 | 4341 | ATA_HORKAGE_FIRMWARE_WARN }, |
d10d491f | 4342 | |
4d1f9082 | 4343 | { "ST31000333AS", "SD1[5-9]", ATA_HORKAGE_NONCQ | |
d10d491f TH |
4344 | ATA_HORKAGE_FIRMWARE_WARN }, |
4345 | ||
4d1f9082 | 4346 | { "ST3640[36]23AS", "SD1[5-9]", ATA_HORKAGE_NONCQ | |
d10d491f TH |
4347 | ATA_HORKAGE_FIRMWARE_WARN }, |
4348 | ||
4d1f9082 | 4349 | { "ST3320[68]13AS", "SD1[5-9]", ATA_HORKAGE_NONCQ | |
ac70a964 TH |
4350 | ATA_HORKAGE_FIRMWARE_WARN }, |
4351 | ||
08c85d2a | 4352 | /* drives which fail FPDMA_AA activation (some may freeze afterwards) */ |
87809942 | 4353 | { "ST1000LM024 HN-M101MBB", "2AR10001", ATA_HORKAGE_BROKEN_FPDMA_AA }, |
b28a613e | 4354 | { "ST1000LM024 HN-M101MBB", "2BA30001", ATA_HORKAGE_BROKEN_FPDMA_AA }, |
08c85d2a | 4355 | { "VB0250EAVER", "HPG7", ATA_HORKAGE_BROKEN_FPDMA_AA }, |
87809942 | 4356 | |
36e337d0 RH |
4357 | /* Blacklist entries taken from Silicon Image 3124/3132 |
4358 | Windows driver .inf file - also several Linux problem reports */ | |
4359 | { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, }, | |
4360 | { "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, }, | |
4361 | { "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, }, | |
6919a0a6 | 4362 | |
68b0ddb2 TH |
4363 | /* https://bugzilla.kernel.org/show_bug.cgi?id=15573 */ |
4364 | { "C300-CTFDDAC128MAG", "0001", ATA_HORKAGE_NONCQ, }, | |
4365 | ||
16c55b03 TH |
4366 | /* devices which puke on READ_NATIVE_MAX */ |
4367 | { "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA, }, | |
4368 | { "WDC WD3200JD-00KLB0", "WD-WCAMR1130137", ATA_HORKAGE_BROKEN_HPA }, | |
4369 | { "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA }, | |
4370 | { "MAXTOR 6L080L4", "A93.0500", ATA_HORKAGE_BROKEN_HPA }, | |
6919a0a6 | 4371 | |
7831387b TH |
4372 | /* this one allows HPA unlocking but fails IOs on the area */ |
4373 | { "OCZ-VERTEX", "1.30", ATA_HORKAGE_BROKEN_HPA }, | |
4374 | ||
93328e11 AC |
4375 | /* Devices which report 1 sector over size HPA */ |
4376 | { "ST340823A", NULL, ATA_HORKAGE_HPA_SIZE, }, | |
4377 | { "ST320413A", NULL, ATA_HORKAGE_HPA_SIZE, }, | |
b152fcd3 | 4378 | { "ST310211A", NULL, ATA_HORKAGE_HPA_SIZE, }, |
93328e11 | 4379 | |
6bbfd53d AC |
4380 | /* Devices which get the IVB wrong */ |
4381 | { "QUANTUM FIREBALLlct10 05", "A03.0900", ATA_HORKAGE_IVB, }, | |
a79067e5 | 4382 | /* Maybe we should just blacklist TSSTcorp... */ |
7da4c935 | 4383 | { "TSSTcorp CDDVDW SH-S202[HJN]", "SB0[01]", ATA_HORKAGE_IVB, }, |
6bbfd53d | 4384 | |
9ce8e307 JA |
4385 | /* Devices that do not need bridging limits applied */ |
4386 | { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, }, | |
04d0f1b8 | 4387 | { "BUFFALO HD-QSU2/R5", NULL, ATA_HORKAGE_BRIDGE_OK, }, |
9ce8e307 | 4388 | |
9062712f TH |
4389 | /* Devices which aren't very happy with higher link speeds */ |
4390 | { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, }, | |
c531077f | 4391 | { "Seagate FreeAgent GoFlex", NULL, ATA_HORKAGE_1_5_GBPS, }, |
9062712f | 4392 | |
d0cb43b3 TH |
4393 | /* |
4394 | * Devices which choke on SETXFER. Applies only if both the | |
4395 | * device and controller are SATA. | |
4396 | */ | |
cd691876 | 4397 | { "PIONEER DVD-RW DVRTD08", NULL, ATA_HORKAGE_NOSETXFER }, |
3a25179e VL |
4398 | { "PIONEER DVD-RW DVRTD08A", NULL, ATA_HORKAGE_NOSETXFER }, |
4399 | { "PIONEER DVD-RW DVR-215", NULL, ATA_HORKAGE_NOSETXFER }, | |
cd691876 TH |
4400 | { "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER }, |
4401 | { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER }, | |
d0cb43b3 | 4402 | |
f78dea06 | 4403 | /* devices that don't properly handle queued TRIM commands */ |
243918be | 4404 | { "Micron_M500_*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | |
ff7f53fb MP |
4405 | ATA_HORKAGE_ZERO_AFTER_TRIM, }, |
4406 | { "Crucial_CT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | | |
4407 | ATA_HORKAGE_ZERO_AFTER_TRIM, }, | |
9051bd39 | 4408 | { "Micron_M5[15]0_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | |
ff7f53fb MP |
4409 | ATA_HORKAGE_ZERO_AFTER_TRIM, }, |
4410 | { "Crucial_CT*M550*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | | |
4411 | ATA_HORKAGE_ZERO_AFTER_TRIM, }, | |
4412 | { "Crucial_CT*MX100*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | | |
e61f7d1c | 4413 | ATA_HORKAGE_ZERO_AFTER_TRIM, }, |
9a9324d3 | 4414 | { "Samsung SSD 8*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | |
6fc4d97a | 4415 | ATA_HORKAGE_ZERO_AFTER_TRIM, }, |
7a7184b0 GA |
4416 | { "FCCT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | |
4417 | ATA_HORKAGE_ZERO_AFTER_TRIM, }, | |
e61f7d1c | 4418 | |
cda57b1b AF |
4419 | /* devices that don't properly handle TRIM commands */ |
4420 | { "SuperSSpeed S238*", NULL, ATA_HORKAGE_NOTRIM, }, | |
4421 | ||
e61f7d1c MP |
4422 | /* |
4423 | * As defined, the DRAT (Deterministic Read After Trim) and RZAT | |
4424 | * (Return Zero After Trim) flags in the ATA Command Set are | |
4425 | * unreliable in the sense that they only define what happens if | |
4426 | * the device successfully executed the DSM TRIM command. TRIM | |
4427 | * is only advisory, however, and the device is free to silently | |
4428 | * ignore all or parts of the request. | |
4429 | * | |
4430 | * Whitelist drives that are known to reliably return zeroes | |
4431 | * after TRIM. | |
4432 | */ | |
4433 | ||
4434 | /* | |
4435 | * The intel 510 drive has buggy DRAT/RZAT. Explicitly exclude | |
4436 | * that model before whitelisting all other intel SSDs. | |
4437 | */ | |
4438 | { "INTEL*SSDSC2MH*", NULL, 0, }, | |
4439 | ||
ff7f53fb MP |
4440 | { "Micron*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, |
4441 | { "Crucial*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, | |
e61f7d1c MP |
4442 | { "INTEL*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, |
4443 | { "SSD*INTEL*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, | |
4444 | { "Samsung*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, | |
4445 | { "SAMSUNG*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, | |
4446 | { "ST[1248][0248]0[FH]*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, | |
f78dea06 | 4447 | |
ecd75ad5 TH |
4448 | /* |
4449 | * Some WD SATA-I drives spin up and down erratically when the link | |
4450 | * is put into the slumber mode. We don't have full list of the | |
4451 | * affected devices. Disable LPM if the device matches one of the | |
4452 | * known prefixes and is SATA-1. As a side effect LPM partial is | |
4453 | * lost too. | |
4454 | * | |
4455 | * https://bugzilla.kernel.org/show_bug.cgi?id=57211 | |
4456 | */ | |
4457 | { "WDC WD800JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, | |
4458 | { "WDC WD1200JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, | |
4459 | { "WDC WD1600JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, | |
4460 | { "WDC WD2000JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, | |
4461 | { "WDC WD2500JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, | |
4462 | { "WDC WD3000JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, | |
4463 | { "WDC WD3200JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, | |
4464 | ||
6919a0a6 AC |
4465 | /* End Marker */ |
4466 | { } | |
1da177e4 | 4467 | }; |
2e9edbf8 | 4468 | |
75683fe7 | 4469 | static unsigned long ata_dev_blacklisted(const struct ata_device *dev) |
1da177e4 | 4470 | { |
8bfa79fc TH |
4471 | unsigned char model_num[ATA_ID_PROD_LEN + 1]; |
4472 | unsigned char model_rev[ATA_ID_FW_REV_LEN + 1]; | |
6919a0a6 | 4473 | const struct ata_blacklist_entry *ad = ata_device_blacklist; |
3a778275 | 4474 | |
8bfa79fc TH |
4475 | ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num)); |
4476 | ata_id_c_string(dev->id, model_rev, ATA_ID_FW_REV, sizeof(model_rev)); | |
1da177e4 | 4477 | |
6919a0a6 | 4478 | while (ad->model_num) { |
1c402799 | 4479 | if (glob_match(ad->model_num, model_num)) { |
6919a0a6 AC |
4480 | if (ad->model_rev == NULL) |
4481 | return ad->horkage; | |
1c402799 | 4482 | if (glob_match(ad->model_rev, model_rev)) |
6919a0a6 | 4483 | return ad->horkage; |
f4b15fef | 4484 | } |
6919a0a6 | 4485 | ad++; |
f4b15fef | 4486 | } |
1da177e4 LT |
4487 | return 0; |
4488 | } | |
4489 | ||
6919a0a6 AC |
4490 | static int ata_dma_blacklisted(const struct ata_device *dev) |
4491 | { | |
4492 | /* We don't support polling DMA. | |
4493 | * DMA blacklist those ATAPI devices with CDB-intr (and use PIO) | |
4494 | * if the LLDD handles only interrupts in the HSM_ST_LAST state. | |
4495 | */ | |
9af5c9c9 | 4496 | if ((dev->link->ap->flags & ATA_FLAG_PIO_POLLING) && |
6919a0a6 AC |
4497 | (dev->flags & ATA_DFLAG_CDB_INTR)) |
4498 | return 1; | |
75683fe7 | 4499 | return (dev->horkage & ATA_HORKAGE_NODMA) ? 1 : 0; |
6919a0a6 AC |
4500 | } |
4501 | ||
6bbfd53d AC |
4502 | /** |
4503 | * ata_is_40wire - check drive side detection | |
4504 | * @dev: device | |
4505 | * | |
4506 | * Perform drive side detection decoding, allowing for device vendors | |
4507 | * who can't follow the documentation. | |
4508 | */ | |
4509 | ||
4510 | static int ata_is_40wire(struct ata_device *dev) | |
4511 | { | |
4512 | if (dev->horkage & ATA_HORKAGE_IVB) | |
4513 | return ata_drive_40wire_relaxed(dev->id); | |
4514 | return ata_drive_40wire(dev->id); | |
4515 | } | |
4516 | ||
15a5551c AC |
4517 | /** |
4518 | * cable_is_40wire - 40/80/SATA decider | |
4519 | * @ap: port to consider | |
4520 | * | |
4521 | * This function encapsulates the policy for speed management | |
4522 | * in one place. At the moment we don't cache the result but | |
4523 | * there is a good case for setting ap->cbl to the result when | |
4524 | * we are called with unknown cables (and figuring out if it | |
4525 | * impacts hotplug at all). | |
4526 | * | |
4527 | * Return 1 if the cable appears to be 40 wire. | |
4528 | */ | |
4529 | ||
4530 | static int cable_is_40wire(struct ata_port *ap) | |
4531 | { | |
4532 | struct ata_link *link; | |
4533 | struct ata_device *dev; | |
4534 | ||
4a9c7b33 | 4535 | /* If the controller thinks we are 40 wire, we are. */ |
15a5551c AC |
4536 | if (ap->cbl == ATA_CBL_PATA40) |
4537 | return 1; | |
4a9c7b33 TH |
4538 | |
4539 | /* If the controller thinks we are 80 wire, we are. */ | |
15a5551c AC |
4540 | if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA) |
4541 | return 0; | |
4a9c7b33 TH |
4542 | |
4543 | /* If the system is known to be 40 wire short cable (eg | |
4544 | * laptop), then we allow 80 wire modes even if the drive | |
4545 | * isn't sure. | |
4546 | */ | |
f792068e AC |
4547 | if (ap->cbl == ATA_CBL_PATA40_SHORT) |
4548 | return 0; | |
4a9c7b33 TH |
4549 | |
4550 | /* If the controller doesn't know, we scan. | |
4551 | * | |
4552 | * Note: We look for all 40 wire detects at this point. Any | |
4553 | * 80 wire detect is taken to be 80 wire cable because | |
4554 | * - in many setups only the one drive (slave if present) will | |
4555 | * give a valid detect | |
4556 | * - if you have a non detect capable drive you don't want it | |
4557 | * to colour the choice | |
4558 | */ | |
1eca4365 TH |
4559 | ata_for_each_link(link, ap, EDGE) { |
4560 | ata_for_each_dev(dev, link, ENABLED) { | |
4561 | if (!ata_is_40wire(dev)) | |
15a5551c AC |
4562 | return 0; |
4563 | } | |
4564 | } | |
4565 | return 1; | |
4566 | } | |
4567 | ||
a6d5a51c TH |
4568 | /** |
4569 | * ata_dev_xfermask - Compute supported xfermask of the given device | |
a6d5a51c TH |
4570 | * @dev: Device to compute xfermask for |
4571 | * | |
acf356b1 TH |
4572 | * Compute supported xfermask of @dev and store it in |
4573 | * dev->*_mask. This function is responsible for applying all | |
4574 | * known limits including host controller limits, device | |
4575 | * blacklist, etc... | |
a6d5a51c TH |
4576 | * |
4577 | * LOCKING: | |
4578 | * None. | |
a6d5a51c | 4579 | */ |
3373efd8 | 4580 | static void ata_dev_xfermask(struct ata_device *dev) |
1da177e4 | 4581 | { |
9af5c9c9 TH |
4582 | struct ata_link *link = dev->link; |
4583 | struct ata_port *ap = link->ap; | |
cca3974e | 4584 | struct ata_host *host = ap->host; |
a6d5a51c | 4585 | unsigned long xfer_mask; |
1da177e4 | 4586 | |
37deecb5 | 4587 | /* controller modes available */ |
565083e1 TH |
4588 | xfer_mask = ata_pack_xfermask(ap->pio_mask, |
4589 | ap->mwdma_mask, ap->udma_mask); | |
4590 | ||
8343f889 | 4591 | /* drive modes available */ |
37deecb5 TH |
4592 | xfer_mask &= ata_pack_xfermask(dev->pio_mask, |
4593 | dev->mwdma_mask, dev->udma_mask); | |
4594 | xfer_mask &= ata_id_xfermask(dev->id); | |
565083e1 | 4595 | |
b352e57d AC |
4596 | /* |
4597 | * CFA Advanced TrueIDE timings are not allowed on a shared | |
4598 | * cable | |
4599 | */ | |
4600 | if (ata_dev_pair(dev)) { | |
4601 | /* No PIO5 or PIO6 */ | |
4602 | xfer_mask &= ~(0x03 << (ATA_SHIFT_PIO + 5)); | |
4603 | /* No MWDMA3 or MWDMA 4 */ | |
4604 | xfer_mask &= ~(0x03 << (ATA_SHIFT_MWDMA + 3)); | |
4605 | } | |
4606 | ||
37deecb5 TH |
4607 | if (ata_dma_blacklisted(dev)) { |
4608 | xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); | |
a9a79dfe JP |
4609 | ata_dev_warn(dev, |
4610 | "device is on DMA blacklist, disabling DMA\n"); | |
37deecb5 | 4611 | } |
a6d5a51c | 4612 | |
14d66ab7 | 4613 | if ((host->flags & ATA_HOST_SIMPLEX) && |
2dcb407e | 4614 | host->simplex_claimed && host->simplex_claimed != ap) { |
37deecb5 | 4615 | xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); |
a9a79dfe JP |
4616 | ata_dev_warn(dev, |
4617 | "simplex DMA is claimed by other device, disabling DMA\n"); | |
5444a6f4 | 4618 | } |
565083e1 | 4619 | |
e424675f JG |
4620 | if (ap->flags & ATA_FLAG_NO_IORDY) |
4621 | xfer_mask &= ata_pio_mask_no_iordy(dev); | |
4622 | ||
5444a6f4 | 4623 | if (ap->ops->mode_filter) |
a76b62ca | 4624 | xfer_mask = ap->ops->mode_filter(dev, xfer_mask); |
5444a6f4 | 4625 | |
8343f889 RH |
4626 | /* Apply cable rule here. Don't apply it early because when |
4627 | * we handle hot plug the cable type can itself change. | |
4628 | * Check this last so that we know if the transfer rate was | |
4629 | * solely limited by the cable. | |
4630 | * Unknown or 80 wire cables reported host side are checked | |
4631 | * drive side as well. Cases where we know a 40wire cable | |
4632 | * is used safely for 80 are not checked here. | |
4633 | */ | |
4634 | if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA)) | |
4635 | /* UDMA/44 or higher would be available */ | |
15a5551c | 4636 | if (cable_is_40wire(ap)) { |
a9a79dfe JP |
4637 | ata_dev_warn(dev, |
4638 | "limited to UDMA/33 due to 40-wire cable\n"); | |
8343f889 RH |
4639 | xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); |
4640 | } | |
4641 | ||
565083e1 TH |
4642 | ata_unpack_xfermask(xfer_mask, &dev->pio_mask, |
4643 | &dev->mwdma_mask, &dev->udma_mask); | |
1da177e4 LT |
4644 | } |
4645 | ||
1da177e4 LT |
4646 | /** |
4647 | * ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command | |
1da177e4 LT |
4648 | * @dev: Device to which command will be sent |
4649 | * | |
780a87f7 JG |
4650 | * Issue SET FEATURES - XFER MODE command to device @dev |
4651 | * on port @ap. | |
4652 | * | |
1da177e4 | 4653 | * LOCKING: |
0cba632b | 4654 | * PCI/etc. bus probe sem. |
83206a29 TH |
4655 | * |
4656 | * RETURNS: | |
4657 | * 0 on success, AC_ERR_* mask otherwise. | |
1da177e4 LT |
4658 | */ |
4659 | ||
3373efd8 | 4660 | static unsigned int ata_dev_set_xfermode(struct ata_device *dev) |
1da177e4 | 4661 | { |
a0123703 | 4662 | struct ata_taskfile tf; |
83206a29 | 4663 | unsigned int err_mask; |
1da177e4 LT |
4664 | |
4665 | /* set up set-features taskfile */ | |
4666 | DPRINTK("set features - xfer mode\n"); | |
4667 | ||
464cf177 TH |
4668 | /* Some controllers and ATAPI devices show flaky interrupt |
4669 | * behavior after setting xfer mode. Use polling instead. | |
4670 | */ | |
3373efd8 | 4671 | ata_tf_init(dev, &tf); |
a0123703 TH |
4672 | tf.command = ATA_CMD_SET_FEATURES; |
4673 | tf.feature = SETFEATURES_XFER; | |
464cf177 | 4674 | tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_POLLING; |
a0123703 | 4675 | tf.protocol = ATA_PROT_NODATA; |
b9f8ab2d | 4676 | /* If we are using IORDY we must send the mode setting command */ |
11b7becc JG |
4677 | if (ata_pio_need_iordy(dev)) |
4678 | tf.nsect = dev->xfer_mode; | |
b9f8ab2d AC |
4679 | /* If the device has IORDY and the controller does not - turn it off */ |
4680 | else if (ata_id_has_iordy(dev->id)) | |
11b7becc | 4681 | tf.nsect = 0x01; |
b9f8ab2d AC |
4682 | else /* In the ancient relic department - skip all of this */ |
4683 | return 0; | |
1da177e4 | 4684 | |
d531be2c MP |
4685 | /* On some disks, this command causes spin-up, so we need longer timeout */ |
4686 | err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 15000); | |
9f45cbd3 KCA |
4687 | |
4688 | DPRINTK("EXIT, err_mask=%x\n", err_mask); | |
4689 | return err_mask; | |
4690 | } | |
1152b261 | 4691 | |
9f45cbd3 | 4692 | /** |
218f3d30 | 4693 | * ata_dev_set_feature - Issue SET FEATURES - SATA FEATURES |
9f45cbd3 KCA |
4694 | * @dev: Device to which command will be sent |
4695 | * @enable: Whether to enable or disable the feature | |
218f3d30 | 4696 | * @feature: The sector count represents the feature to set |
9f45cbd3 KCA |
4697 | * |
4698 | * Issue SET FEATURES - SATA FEATURES command to device @dev | |
218f3d30 | 4699 | * on port @ap with sector count |
9f45cbd3 KCA |
4700 | * |
4701 | * LOCKING: | |
4702 | * PCI/etc. bus probe sem. | |
4703 | * | |
4704 | * RETURNS: | |
4705 | * 0 on success, AC_ERR_* mask otherwise. | |
4706 | */ | |
1152b261 | 4707 | unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, u8 feature) |
9f45cbd3 KCA |
4708 | { |
4709 | struct ata_taskfile tf; | |
4710 | unsigned int err_mask; | |
974e0a45 | 4711 | unsigned long timeout = 0; |
9f45cbd3 KCA |
4712 | |
4713 | /* set up set-features taskfile */ | |
4714 | DPRINTK("set features - SATA features\n"); | |
4715 | ||
4716 | ata_tf_init(dev, &tf); | |
4717 | tf.command = ATA_CMD_SET_FEATURES; | |
4718 | tf.feature = enable; | |
4719 | tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; | |
4720 | tf.protocol = ATA_PROT_NODATA; | |
218f3d30 | 4721 | tf.nsect = feature; |
9f45cbd3 | 4722 | |
974e0a45 DLM |
4723 | if (enable == SETFEATURES_SPINUP) |
4724 | timeout = ata_probe_timeout ? | |
4725 | ata_probe_timeout * 1000 : SETFEATURES_SPINUP_TIMEOUT; | |
4726 | err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, timeout); | |
1da177e4 | 4727 | |
83206a29 TH |
4728 | DPRINTK("EXIT, err_mask=%x\n", err_mask); |
4729 | return err_mask; | |
1da177e4 | 4730 | } |
633de4cc | 4731 | EXPORT_SYMBOL_GPL(ata_dev_set_feature); |
1da177e4 | 4732 | |
8bf62ece AL |
4733 | /** |
4734 | * ata_dev_init_params - Issue INIT DEV PARAMS command | |
8bf62ece | 4735 | * @dev: Device to which command will be sent |
e2a7f77a RD |
4736 | * @heads: Number of heads (taskfile parameter) |
4737 | * @sectors: Number of sectors (taskfile parameter) | |
8bf62ece AL |
4738 | * |
4739 | * LOCKING: | |
6aff8f1f TH |
4740 | * Kernel thread context (may sleep) |
4741 | * | |
4742 | * RETURNS: | |
4743 | * 0 on success, AC_ERR_* mask otherwise. | |
8bf62ece | 4744 | */ |
3373efd8 TH |
4745 | static unsigned int ata_dev_init_params(struct ata_device *dev, |
4746 | u16 heads, u16 sectors) | |
8bf62ece | 4747 | { |
a0123703 | 4748 | struct ata_taskfile tf; |
6aff8f1f | 4749 | unsigned int err_mask; |
8bf62ece AL |
4750 | |
4751 | /* Number of sectors per track 1-255. Number of heads 1-16 */ | |
4752 | if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16) | |
00b6f5e9 | 4753 | return AC_ERR_INVALID; |
8bf62ece AL |
4754 | |
4755 | /* set up init dev params taskfile */ | |
4756 | DPRINTK("init dev params \n"); | |
4757 | ||
3373efd8 | 4758 | ata_tf_init(dev, &tf); |
a0123703 TH |
4759 | tf.command = ATA_CMD_INIT_DEV_PARAMS; |
4760 | tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; | |
4761 | tf.protocol = ATA_PROT_NODATA; | |
4762 | tf.nsect = sectors; | |
4763 | tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ | |
8bf62ece | 4764 | |
2b789108 | 4765 | err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); |
18b2466c AC |
4766 | /* A clean abort indicates an original or just out of spec drive |
4767 | and we should continue as we issue the setup based on the | |
4768 | drive reported working geometry */ | |
4769 | if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED)) | |
4770 | err_mask = 0; | |
8bf62ece | 4771 | |
6aff8f1f TH |
4772 | DPRINTK("EXIT, err_mask=%x\n", err_mask); |
4773 | return err_mask; | |
8bf62ece AL |
4774 | } |
4775 | ||
1da177e4 | 4776 | /** |
0cba632b JG |
4777 | * ata_sg_clean - Unmap DMA memory associated with command |
4778 | * @qc: Command containing DMA memory to be released | |
4779 | * | |
4780 | * Unmap all mapped DMA memory associated with this command. | |
1da177e4 LT |
4781 | * |
4782 | * LOCKING: | |
cca3974e | 4783 | * spin_lock_irqsave(host lock) |
1da177e4 | 4784 | */ |
70e6ad0c | 4785 | void ata_sg_clean(struct ata_queued_cmd *qc) |
1da177e4 LT |
4786 | { |
4787 | struct ata_port *ap = qc->ap; | |
ff2aeb1e | 4788 | struct scatterlist *sg = qc->sg; |
1da177e4 LT |
4789 | int dir = qc->dma_dir; |
4790 | ||
efcb3cf7 | 4791 | WARN_ON_ONCE(sg == NULL); |
1da177e4 | 4792 | |
dde20207 | 4793 | VPRINTK("unmapping %u sg elements\n", qc->n_elem); |
1da177e4 | 4794 | |
dde20207 | 4795 | if (qc->n_elem) |
5825627c | 4796 | dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir); |
1da177e4 LT |
4797 | |
4798 | qc->flags &= ~ATA_QCFLAG_DMAMAP; | |
ff2aeb1e | 4799 | qc->sg = NULL; |
1da177e4 LT |
4800 | } |
4801 | ||
1da177e4 | 4802 | /** |
5895ef9a | 4803 | * atapi_check_dma - Check whether ATAPI DMA can be supported |
1da177e4 LT |
4804 | * @qc: Metadata associated with taskfile to check |
4805 | * | |
780a87f7 JG |
4806 | * Allow low-level driver to filter ATA PACKET commands, returning |
4807 | * a status indicating whether or not it is OK to use DMA for the | |
4808 | * supplied PACKET command. | |
4809 | * | |
1da177e4 | 4810 | * LOCKING: |
624d5c51 TH |
4811 | * spin_lock_irqsave(host lock) |
4812 | * | |
4813 | * RETURNS: 0 when ATAPI DMA can be used | |
4814 | * nonzero otherwise | |
4815 | */ | |
5895ef9a | 4816 | int atapi_check_dma(struct ata_queued_cmd *qc) |
624d5c51 TH |
4817 | { |
4818 | struct ata_port *ap = qc->ap; | |
71601958 | 4819 | |
624d5c51 TH |
4820 | /* Don't allow DMA if it isn't multiple of 16 bytes. Quite a |
4821 | * few ATAPI devices choke on such DMA requests. | |
4822 | */ | |
6a87e42e TH |
4823 | if (!(qc->dev->horkage & ATA_HORKAGE_ATAPI_MOD16_DMA) && |
4824 | unlikely(qc->nbytes & 15)) | |
624d5c51 | 4825 | return 1; |
e2cec771 | 4826 | |
624d5c51 TH |
4827 | if (ap->ops->check_atapi_dma) |
4828 | return ap->ops->check_atapi_dma(qc); | |
e2cec771 | 4829 | |
624d5c51 TH |
4830 | return 0; |
4831 | } | |
1da177e4 | 4832 | |
624d5c51 TH |
4833 | /** |
4834 | * ata_std_qc_defer - Check whether a qc needs to be deferred | |
4835 | * @qc: ATA command in question | |
4836 | * | |
4837 | * Non-NCQ commands cannot run with any other command, NCQ or | |
4838 | * not. As upper layer only knows the queue depth, we are | |
4839 | * responsible for maintaining exclusion. This function checks | |
4840 | * whether a new command @qc can be issued. | |
4841 | * | |
4842 | * LOCKING: | |
4843 | * spin_lock_irqsave(host lock) | |
4844 | * | |
4845 | * RETURNS: | |
4846 | * ATA_DEFER_* if deferring is needed, 0 otherwise. | |
4847 | */ | |
4848 | int ata_std_qc_defer(struct ata_queued_cmd *qc) | |
4849 | { | |
4850 | struct ata_link *link = qc->dev->link; | |
e2cec771 | 4851 | |
179b310a | 4852 | if (ata_is_ncq(qc->tf.protocol)) { |
624d5c51 TH |
4853 | if (!ata_tag_valid(link->active_tag)) |
4854 | return 0; | |
4855 | } else { | |
4856 | if (!ata_tag_valid(link->active_tag) && !link->sactive) | |
4857 | return 0; | |
4858 | } | |
e2cec771 | 4859 | |
624d5c51 TH |
4860 | return ATA_DEFER_LINK; |
4861 | } | |
6912ccd5 | 4862 | |
624d5c51 | 4863 | void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } |
1da177e4 | 4864 | |
624d5c51 TH |
4865 | /** |
4866 | * ata_sg_init - Associate command with scatter-gather table. | |
4867 | * @qc: Command to be associated | |
4868 | * @sg: Scatter-gather table. | |
4869 | * @n_elem: Number of elements in s/g table. | |
4870 | * | |
4871 | * Initialize the data-related elements of queued_cmd @qc | |
4872 | * to point to a scatter-gather table @sg, containing @n_elem | |
4873 | * elements. | |
4874 | * | |
4875 | * LOCKING: | |
4876 | * spin_lock_irqsave(host lock) | |
4877 | */ | |
4878 | void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, | |
4879 | unsigned int n_elem) | |
4880 | { | |
4881 | qc->sg = sg; | |
4882 | qc->n_elem = n_elem; | |
4883 | qc->cursg = qc->sg; | |
4884 | } | |
bb5cb290 | 4885 | |
624d5c51 TH |
4886 | /** |
4887 | * ata_sg_setup - DMA-map the scatter-gather table associated with a command. | |
4888 | * @qc: Command with scatter-gather table to be mapped. | |
4889 | * | |
4890 | * DMA-map the scatter-gather table associated with queued_cmd @qc. | |
4891 | * | |
4892 | * LOCKING: | |
4893 | * spin_lock_irqsave(host lock) | |
4894 | * | |
4895 | * RETURNS: | |
4896 | * Zero on success, negative on error. | |
4897 | * | |
4898 | */ | |
4899 | static int ata_sg_setup(struct ata_queued_cmd *qc) | |
4900 | { | |
4901 | struct ata_port *ap = qc->ap; | |
4902 | unsigned int n_elem; | |
1da177e4 | 4903 | |
624d5c51 | 4904 | VPRINTK("ENTER, ata%u\n", ap->print_id); |
e2cec771 | 4905 | |
624d5c51 TH |
4906 | n_elem = dma_map_sg(ap->dev, qc->sg, qc->n_elem, qc->dma_dir); |
4907 | if (n_elem < 1) | |
4908 | return -1; | |
bb5cb290 | 4909 | |
624d5c51 | 4910 | DPRINTK("%d sg elements mapped\n", n_elem); |
5825627c | 4911 | qc->orig_n_elem = qc->n_elem; |
624d5c51 TH |
4912 | qc->n_elem = n_elem; |
4913 | qc->flags |= ATA_QCFLAG_DMAMAP; | |
1da177e4 | 4914 | |
624d5c51 | 4915 | return 0; |
1da177e4 LT |
4916 | } |
4917 | ||
624d5c51 TH |
4918 | /** |
4919 | * swap_buf_le16 - swap halves of 16-bit words in place | |
4920 | * @buf: Buffer to swap | |
4921 | * @buf_words: Number of 16-bit words in buffer. | |
4922 | * | |
4923 | * Swap halves of 16-bit words if needed to convert from | |
4924 | * little-endian byte order to native cpu byte order, or | |
4925 | * vice-versa. | |
4926 | * | |
4927 | * LOCKING: | |
4928 | * Inherited from caller. | |
4929 | */ | |
4930 | void swap_buf_le16(u16 *buf, unsigned int buf_words) | |
8061f5f0 | 4931 | { |
624d5c51 TH |
4932 | #ifdef __BIG_ENDIAN |
4933 | unsigned int i; | |
8061f5f0 | 4934 | |
624d5c51 TH |
4935 | for (i = 0; i < buf_words; i++) |
4936 | buf[i] = le16_to_cpu(buf[i]); | |
4937 | #endif /* __BIG_ENDIAN */ | |
8061f5f0 TH |
4938 | } |
4939 | ||
8a8bc223 | 4940 | /** |
98bd4be1 SL |
4941 | * ata_qc_new_init - Request an available ATA command, and initialize it |
4942 | * @dev: Device from whom we request an available command structure | |
38755e89 | 4943 | * @tag: tag |
1871ee13 | 4944 | * |
8a8bc223 TH |
4945 | * LOCKING: |
4946 | * None. | |
4947 | */ | |
4948 | ||
98bd4be1 | 4949 | struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag) |
8a8bc223 | 4950 | { |
98bd4be1 | 4951 | struct ata_port *ap = dev->link->ap; |
12cb5ce1 | 4952 | struct ata_queued_cmd *qc; |
8a8bc223 TH |
4953 | |
4954 | /* no command while frozen */ | |
4955 | if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) | |
4956 | return NULL; | |
4957 | ||
98bd4be1 | 4958 | /* libsas case */ |
5067c046 | 4959 | if (ap->flags & ATA_FLAG_SAS_HOST) { |
98bd4be1 SL |
4960 | tag = ata_sas_allocate_tag(ap); |
4961 | if (tag < 0) | |
4962 | return NULL; | |
8a4aeec8 | 4963 | } |
8a8bc223 | 4964 | |
98bd4be1 SL |
4965 | qc = __ata_qc_from_tag(ap, tag); |
4966 | qc->tag = tag; | |
4967 | qc->scsicmd = NULL; | |
4968 | qc->ap = ap; | |
4969 | qc->dev = dev; | |
1da177e4 | 4970 | |
98bd4be1 | 4971 | ata_qc_reinit(qc); |
1da177e4 LT |
4972 | |
4973 | return qc; | |
4974 | } | |
4975 | ||
8a8bc223 TH |
4976 | /** |
4977 | * ata_qc_free - free unused ata_queued_cmd | |
4978 | * @qc: Command to complete | |
4979 | * | |
4980 | * Designed to free unused ata_queued_cmd object | |
4981 | * in case something prevents using it. | |
4982 | * | |
4983 | * LOCKING: | |
4984 | * spin_lock_irqsave(host lock) | |
4985 | */ | |
4986 | void ata_qc_free(struct ata_queued_cmd *qc) | |
4987 | { | |
a1104016 | 4988 | struct ata_port *ap; |
8a8bc223 TH |
4989 | unsigned int tag; |
4990 | ||
efcb3cf7 | 4991 | WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ |
a1104016 | 4992 | ap = qc->ap; |
8a8bc223 TH |
4993 | |
4994 | qc->flags = 0; | |
4995 | tag = qc->tag; | |
4996 | if (likely(ata_tag_valid(tag))) { | |
4997 | qc->tag = ATA_TAG_POISON; | |
5067c046 | 4998 | if (ap->flags & ATA_FLAG_SAS_HOST) |
98bd4be1 | 4999 | ata_sas_free_tag(tag, ap); |
8a8bc223 TH |
5000 | } |
5001 | } | |
5002 | ||
76014427 | 5003 | void __ata_qc_complete(struct ata_queued_cmd *qc) |
1da177e4 | 5004 | { |
a1104016 JL |
5005 | struct ata_port *ap; |
5006 | struct ata_link *link; | |
dedaf2b0 | 5007 | |
efcb3cf7 TH |
5008 | WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ |
5009 | WARN_ON_ONCE(!(qc->flags & ATA_QCFLAG_ACTIVE)); | |
a1104016 JL |
5010 | ap = qc->ap; |
5011 | link = qc->dev->link; | |
1da177e4 LT |
5012 | |
5013 | if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) | |
5014 | ata_sg_clean(qc); | |
5015 | ||
7401abf2 | 5016 | /* command should be marked inactive atomically with qc completion */ |
179b310a | 5017 | if (ata_is_ncq(qc->tf.protocol)) { |
9af5c9c9 | 5018 | link->sactive &= ~(1 << qc->tag); |
da917d69 TH |
5019 | if (!link->sactive) |
5020 | ap->nr_active_links--; | |
5021 | } else { | |
9af5c9c9 | 5022 | link->active_tag = ATA_TAG_POISON; |
da917d69 TH |
5023 | ap->nr_active_links--; |
5024 | } | |
5025 | ||
5026 | /* clear exclusive status */ | |
5027 | if (unlikely(qc->flags & ATA_QCFLAG_CLEAR_EXCL && | |
5028 | ap->excl_link == link)) | |
5029 | ap->excl_link = NULL; | |
7401abf2 | 5030 | |
3f3791d3 AL |
5031 | /* atapi: mark qc as inactive to prevent the interrupt handler |
5032 | * from completing the command twice later, before the error handler | |
5033 | * is called. (when rc != 0 and atapi request sense is needed) | |
5034 | */ | |
5035 | qc->flags &= ~ATA_QCFLAG_ACTIVE; | |
dedaf2b0 | 5036 | ap->qc_active &= ~(1 << qc->tag); |
3f3791d3 | 5037 | |
1da177e4 | 5038 | /* call completion callback */ |
77853bf2 | 5039 | qc->complete_fn(qc); |
1da177e4 LT |
5040 | } |
5041 | ||
39599a53 TH |
5042 | static void fill_result_tf(struct ata_queued_cmd *qc) |
5043 | { | |
5044 | struct ata_port *ap = qc->ap; | |
5045 | ||
39599a53 | 5046 | qc->result_tf.flags = qc->tf.flags; |
22183bf5 | 5047 | ap->ops->qc_fill_rtf(qc); |
39599a53 TH |
5048 | } |
5049 | ||
00115e0f TH |
5050 | static void ata_verify_xfer(struct ata_queued_cmd *qc) |
5051 | { | |
5052 | struct ata_device *dev = qc->dev; | |
5053 | ||
eb0effdf | 5054 | if (!ata_is_data(qc->tf.protocol)) |
00115e0f TH |
5055 | return; |
5056 | ||
5057 | if ((dev->mwdma_mask || dev->udma_mask) && ata_is_pio(qc->tf.protocol)) | |
5058 | return; | |
5059 | ||
5060 | dev->flags &= ~ATA_DFLAG_DUBIOUS_XFER; | |
5061 | } | |
5062 | ||
f686bcb8 TH |
5063 | /** |
5064 | * ata_qc_complete - Complete an active ATA command | |
5065 | * @qc: Command to complete | |
f686bcb8 | 5066 | * |
1aadf5c3 TH |
5067 | * Indicate to the mid and upper layers that an ATA command has |
5068 | * completed, with either an ok or not-ok status. | |
5069 | * | |
5070 | * Refrain from calling this function multiple times when | |
5071 | * successfully completing multiple NCQ commands. | |
5072 | * ata_qc_complete_multiple() should be used instead, which will | |
5073 | * properly update IRQ expect state. | |
f686bcb8 TH |
5074 | * |
5075 | * LOCKING: | |
cca3974e | 5076 | * spin_lock_irqsave(host lock) |
f686bcb8 TH |
5077 | */ |
5078 | void ata_qc_complete(struct ata_queued_cmd *qc) | |
5079 | { | |
5080 | struct ata_port *ap = qc->ap; | |
5081 | ||
eb25cb99 SL |
5082 | /* Trigger the LED (if available) */ |
5083 | ledtrig_disk_activity(); | |
5084 | ||
f686bcb8 TH |
5085 | /* XXX: New EH and old EH use different mechanisms to |
5086 | * synchronize EH with regular execution path. | |
5087 | * | |
5088 | * In new EH, a failed qc is marked with ATA_QCFLAG_FAILED. | |
5089 | * Normal execution path is responsible for not accessing a | |
5090 | * failed qc. libata core enforces the rule by returning NULL | |
5091 | * from ata_qc_from_tag() for failed qcs. | |
5092 | * | |
5093 | * Old EH depends on ata_qc_complete() nullifying completion | |
5094 | * requests if ATA_QCFLAG_EH_SCHEDULED is set. Old EH does | |
5095 | * not synchronize with interrupt handler. Only PIO task is | |
5096 | * taken care of. | |
5097 | */ | |
5098 | if (ap->ops->error_handler) { | |
4dbfa39b TH |
5099 | struct ata_device *dev = qc->dev; |
5100 | struct ata_eh_info *ehi = &dev->link->eh_info; | |
5101 | ||
f686bcb8 TH |
5102 | if (unlikely(qc->err_mask)) |
5103 | qc->flags |= ATA_QCFLAG_FAILED; | |
5104 | ||
f08dc1ac TH |
5105 | /* |
5106 | * Finish internal commands without any further processing | |
5107 | * and always with the result TF filled. | |
5108 | */ | |
5109 | if (unlikely(ata_tag_internal(qc->tag))) { | |
f4b31db9 | 5110 | fill_result_tf(qc); |
255c03d1 | 5111 | trace_ata_qc_complete_internal(qc); |
f08dc1ac TH |
5112 | __ata_qc_complete(qc); |
5113 | return; | |
5114 | } | |
f4b31db9 | 5115 | |
f08dc1ac TH |
5116 | /* |
5117 | * Non-internal qc has failed. Fill the result TF and | |
5118 | * summon EH. | |
5119 | */ | |
5120 | if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) { | |
5121 | fill_result_tf(qc); | |
255c03d1 | 5122 | trace_ata_qc_complete_failed(qc); |
f08dc1ac | 5123 | ata_qc_schedule_eh(qc); |
f4b31db9 | 5124 | return; |
f686bcb8 TH |
5125 | } |
5126 | ||
4dc738ed TH |
5127 | WARN_ON_ONCE(ap->pflags & ATA_PFLAG_FROZEN); |
5128 | ||
f686bcb8 TH |
5129 | /* read result TF if requested */ |
5130 | if (qc->flags & ATA_QCFLAG_RESULT_TF) | |
39599a53 | 5131 | fill_result_tf(qc); |
f686bcb8 | 5132 | |
255c03d1 | 5133 | trace_ata_qc_complete_done(qc); |
4dbfa39b TH |
5134 | /* Some commands need post-processing after successful |
5135 | * completion. | |
5136 | */ | |
5137 | switch (qc->tf.command) { | |
5138 | case ATA_CMD_SET_FEATURES: | |
5139 | if (qc->tf.feature != SETFEATURES_WC_ON && | |
0c12735e TY |
5140 | qc->tf.feature != SETFEATURES_WC_OFF && |
5141 | qc->tf.feature != SETFEATURES_RA_ON && | |
5142 | qc->tf.feature != SETFEATURES_RA_OFF) | |
4dbfa39b TH |
5143 | break; |
5144 | /* fall through */ | |
5145 | case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */ | |
5146 | case ATA_CMD_SET_MULTI: /* multi_count changed */ | |
5147 | /* revalidate device */ | |
5148 | ehi->dev_action[dev->devno] |= ATA_EH_REVALIDATE; | |
5149 | ata_port_schedule_eh(ap); | |
5150 | break; | |
054a5fba TH |
5151 | |
5152 | case ATA_CMD_SLEEP: | |
5153 | dev->flags |= ATA_DFLAG_SLEEPING; | |
5154 | break; | |
4dbfa39b TH |
5155 | } |
5156 | ||
00115e0f TH |
5157 | if (unlikely(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) |
5158 | ata_verify_xfer(qc); | |
5159 | ||
f686bcb8 TH |
5160 | __ata_qc_complete(qc); |
5161 | } else { | |
5162 | if (qc->flags & ATA_QCFLAG_EH_SCHEDULED) | |
5163 | return; | |
5164 | ||
5165 | /* read result TF if failed or requested */ | |
5166 | if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF) | |
39599a53 | 5167 | fill_result_tf(qc); |
f686bcb8 TH |
5168 | |
5169 | __ata_qc_complete(qc); | |
5170 | } | |
5171 | } | |
5172 | ||
dedaf2b0 TH |
5173 | /** |
5174 | * ata_qc_complete_multiple - Complete multiple qcs successfully | |
5175 | * @ap: port in question | |
5176 | * @qc_active: new qc_active mask | |
dedaf2b0 TH |
5177 | * |
5178 | * Complete in-flight commands. This functions is meant to be | |
5179 | * called from low-level driver's interrupt routine to complete | |
5180 | * requests normally. ap->qc_active and @qc_active is compared | |
5181 | * and commands are completed accordingly. | |
5182 | * | |
1aadf5c3 TH |
5183 | * Always use this function when completing multiple NCQ commands |
5184 | * from IRQ handlers instead of calling ata_qc_complete() | |
5185 | * multiple times to keep IRQ expect status properly in sync. | |
5186 | * | |
dedaf2b0 | 5187 | * LOCKING: |
cca3974e | 5188 | * spin_lock_irqsave(host lock) |
dedaf2b0 TH |
5189 | * |
5190 | * RETURNS: | |
5191 | * Number of completed commands on success, -errno otherwise. | |
5192 | */ | |
79f97dad | 5193 | int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active) |
dedaf2b0 TH |
5194 | { |
5195 | int nr_done = 0; | |
5196 | u32 done_mask; | |
dedaf2b0 TH |
5197 | |
5198 | done_mask = ap->qc_active ^ qc_active; | |
5199 | ||
5200 | if (unlikely(done_mask & qc_active)) { | |
a9a79dfe JP |
5201 | ata_port_err(ap, "illegal qc_active transition (%08x->%08x)\n", |
5202 | ap->qc_active, qc_active); | |
dedaf2b0 TH |
5203 | return -EINVAL; |
5204 | } | |
5205 | ||
43768180 | 5206 | while (done_mask) { |
dedaf2b0 | 5207 | struct ata_queued_cmd *qc; |
43768180 | 5208 | unsigned int tag = __ffs(done_mask); |
dedaf2b0 | 5209 | |
43768180 JA |
5210 | qc = ata_qc_from_tag(ap, tag); |
5211 | if (qc) { | |
dedaf2b0 TH |
5212 | ata_qc_complete(qc); |
5213 | nr_done++; | |
5214 | } | |
43768180 | 5215 | done_mask &= ~(1 << tag); |
dedaf2b0 TH |
5216 | } |
5217 | ||
5218 | return nr_done; | |
5219 | } | |
5220 | ||
1da177e4 LT |
5221 | /** |
5222 | * ata_qc_issue - issue taskfile to device | |
5223 | * @qc: command to issue to device | |
5224 | * | |
5225 | * Prepare an ATA command to submission to device. | |
5226 | * This includes mapping the data into a DMA-able | |
5227 | * area, filling in the S/G table, and finally | |
5228 | * writing the taskfile to hardware, starting the command. | |
5229 | * | |
5230 | * LOCKING: | |
cca3974e | 5231 | * spin_lock_irqsave(host lock) |
1da177e4 | 5232 | */ |
8e0e694a | 5233 | void ata_qc_issue(struct ata_queued_cmd *qc) |
1da177e4 LT |
5234 | { |
5235 | struct ata_port *ap = qc->ap; | |
9af5c9c9 | 5236 | struct ata_link *link = qc->dev->link; |
405e66b3 | 5237 | u8 prot = qc->tf.protocol; |
1da177e4 | 5238 | |
dedaf2b0 TH |
5239 | /* Make sure only one non-NCQ command is outstanding. The |
5240 | * check is skipped for old EH because it reuses active qc to | |
5241 | * request ATAPI sense. | |
5242 | */ | |
efcb3cf7 | 5243 | WARN_ON_ONCE(ap->ops->error_handler && ata_tag_valid(link->active_tag)); |
dedaf2b0 | 5244 | |
1973a023 | 5245 | if (ata_is_ncq(prot)) { |
efcb3cf7 | 5246 | WARN_ON_ONCE(link->sactive & (1 << qc->tag)); |
da917d69 TH |
5247 | |
5248 | if (!link->sactive) | |
5249 | ap->nr_active_links++; | |
9af5c9c9 | 5250 | link->sactive |= 1 << qc->tag; |
dedaf2b0 | 5251 | } else { |
efcb3cf7 | 5252 | WARN_ON_ONCE(link->sactive); |
da917d69 TH |
5253 | |
5254 | ap->nr_active_links++; | |
9af5c9c9 | 5255 | link->active_tag = qc->tag; |
dedaf2b0 TH |
5256 | } |
5257 | ||
e4a70e76 | 5258 | qc->flags |= ATA_QCFLAG_ACTIVE; |
dedaf2b0 | 5259 | ap->qc_active |= 1 << qc->tag; |
e4a70e76 | 5260 | |
60f5d6ef TH |
5261 | /* |
5262 | * We guarantee to LLDs that they will have at least one | |
f92a2636 TH |
5263 | * non-zero sg if the command is a data command. |
5264 | */ | |
60f5d6ef TH |
5265 | if (WARN_ON_ONCE(ata_is_data(prot) && |
5266 | (!qc->sg || !qc->n_elem || !qc->nbytes))) | |
5267 | goto sys_err; | |
f92a2636 | 5268 | |
405e66b3 | 5269 | if (ata_is_dma(prot) || (ata_is_pio(prot) && |
f92a2636 | 5270 | (ap->flags & ATA_FLAG_PIO_DMA))) |
001102d7 | 5271 | if (ata_sg_setup(qc)) |
60f5d6ef | 5272 | goto sys_err; |
1da177e4 | 5273 | |
cf480626 | 5274 | /* if device is sleeping, schedule reset and abort the link */ |
054a5fba | 5275 | if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) { |
cf480626 | 5276 | link->eh_info.action |= ATA_EH_RESET; |
054a5fba TH |
5277 | ata_ehi_push_desc(&link->eh_info, "waking up from sleep"); |
5278 | ata_link_abort(link); | |
5279 | return; | |
5280 | } | |
5281 | ||
1da177e4 | 5282 | ap->ops->qc_prep(qc); |
255c03d1 | 5283 | trace_ata_qc_issue(qc); |
8e0e694a TH |
5284 | qc->err_mask |= ap->ops->qc_issue(qc); |
5285 | if (unlikely(qc->err_mask)) | |
5286 | goto err; | |
5287 | return; | |
1da177e4 | 5288 | |
60f5d6ef | 5289 | sys_err: |
8e0e694a TH |
5290 | qc->err_mask |= AC_ERR_SYSTEM; |
5291 | err: | |
5292 | ata_qc_complete(qc); | |
1da177e4 LT |
5293 | } |
5294 | ||
34bf2170 TH |
5295 | /** |
5296 | * sata_scr_valid - test whether SCRs are accessible | |
936fd732 | 5297 | * @link: ATA link to test SCR accessibility for |
34bf2170 | 5298 | * |
936fd732 | 5299 | * Test whether SCRs are accessible for @link. |
34bf2170 TH |
5300 | * |
5301 | * LOCKING: | |
5302 | * None. | |
5303 | * | |
5304 | * RETURNS: | |
5305 | * 1 if SCRs are accessible, 0 otherwise. | |
5306 | */ | |
936fd732 | 5307 | int sata_scr_valid(struct ata_link *link) |
34bf2170 | 5308 | { |
936fd732 TH |
5309 | struct ata_port *ap = link->ap; |
5310 | ||
a16abc0b | 5311 | return (ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read; |
34bf2170 TH |
5312 | } |
5313 | ||
5314 | /** | |
5315 | * sata_scr_read - read SCR register of the specified port | |
936fd732 | 5316 | * @link: ATA link to read SCR for |
34bf2170 TH |
5317 | * @reg: SCR to read |
5318 | * @val: Place to store read value | |
5319 | * | |
936fd732 | 5320 | * Read SCR register @reg of @link into *@val. This function is |
633273a3 TH |
5321 | * guaranteed to succeed if @link is ap->link, the cable type of |
5322 | * the port is SATA and the port implements ->scr_read. | |
34bf2170 TH |
5323 | * |
5324 | * LOCKING: | |
633273a3 | 5325 | * None if @link is ap->link. Kernel thread context otherwise. |
34bf2170 TH |
5326 | * |
5327 | * RETURNS: | |
5328 | * 0 on success, negative errno on failure. | |
5329 | */ | |
936fd732 | 5330 | int sata_scr_read(struct ata_link *link, int reg, u32 *val) |
34bf2170 | 5331 | { |
633273a3 | 5332 | if (ata_is_host_link(link)) { |
633273a3 | 5333 | if (sata_scr_valid(link)) |
82ef04fb | 5334 | return link->ap->ops->scr_read(link, reg, val); |
633273a3 TH |
5335 | return -EOPNOTSUPP; |
5336 | } | |
5337 | ||
5338 | return sata_pmp_scr_read(link, reg, val); | |
34bf2170 TH |
5339 | } |
5340 | ||
5341 | /** | |
5342 | * sata_scr_write - write SCR register of the specified port | |
936fd732 | 5343 | * @link: ATA link to write SCR for |
34bf2170 TH |
5344 | * @reg: SCR to write |
5345 | * @val: value to write | |
5346 | * | |
936fd732 | 5347 | * Write @val to SCR register @reg of @link. This function is |
633273a3 TH |
5348 | * guaranteed to succeed if @link is ap->link, the cable type of |
5349 | * the port is SATA and the port implements ->scr_read. | |
34bf2170 TH |
5350 | * |
5351 | * LOCKING: | |
633273a3 | 5352 | * None if @link is ap->link. Kernel thread context otherwise. |
34bf2170 TH |
5353 | * |
5354 | * RETURNS: | |
5355 | * 0 on success, negative errno on failure. | |
5356 | */ | |
936fd732 | 5357 | int sata_scr_write(struct ata_link *link, int reg, u32 val) |
34bf2170 | 5358 | { |
633273a3 | 5359 | if (ata_is_host_link(link)) { |
633273a3 | 5360 | if (sata_scr_valid(link)) |
82ef04fb | 5361 | return link->ap->ops->scr_write(link, reg, val); |
633273a3 TH |
5362 | return -EOPNOTSUPP; |
5363 | } | |
936fd732 | 5364 | |
633273a3 | 5365 | return sata_pmp_scr_write(link, reg, val); |
34bf2170 TH |
5366 | } |
5367 | ||
5368 | /** | |
5369 | * sata_scr_write_flush - write SCR register of the specified port and flush | |
936fd732 | 5370 | * @link: ATA link to write SCR for |
34bf2170 TH |
5371 | * @reg: SCR to write |
5372 | * @val: value to write | |
5373 | * | |
5374 | * This function is identical to sata_scr_write() except that this | |
5375 | * function performs flush after writing to the register. | |
5376 | * | |
5377 | * LOCKING: | |
633273a3 | 5378 | * None if @link is ap->link. Kernel thread context otherwise. |
34bf2170 TH |
5379 | * |
5380 | * RETURNS: | |
5381 | * 0 on success, negative errno on failure. | |
5382 | */ | |
936fd732 | 5383 | int sata_scr_write_flush(struct ata_link *link, int reg, u32 val) |
34bf2170 | 5384 | { |
633273a3 | 5385 | if (ata_is_host_link(link)) { |
633273a3 | 5386 | int rc; |
da3dbb17 | 5387 | |
633273a3 | 5388 | if (sata_scr_valid(link)) { |
82ef04fb | 5389 | rc = link->ap->ops->scr_write(link, reg, val); |
633273a3 | 5390 | if (rc == 0) |
82ef04fb | 5391 | rc = link->ap->ops->scr_read(link, reg, &val); |
633273a3 TH |
5392 | return rc; |
5393 | } | |
5394 | return -EOPNOTSUPP; | |
34bf2170 | 5395 | } |
633273a3 TH |
5396 | |
5397 | return sata_pmp_scr_write(link, reg, val); | |
34bf2170 TH |
5398 | } |
5399 | ||
5400 | /** | |
b1c72916 | 5401 | * ata_phys_link_online - test whether the given link is online |
936fd732 | 5402 | * @link: ATA link to test |
34bf2170 | 5403 | * |
936fd732 TH |
5404 | * Test whether @link is online. Note that this function returns |
5405 | * 0 if online status of @link cannot be obtained, so | |
5406 | * ata_link_online(link) != !ata_link_offline(link). | |
34bf2170 TH |
5407 | * |
5408 | * LOCKING: | |
5409 | * None. | |
5410 | * | |
5411 | * RETURNS: | |
b5b3fa38 | 5412 | * True if the port online status is available and online. |
34bf2170 | 5413 | */ |
b1c72916 | 5414 | bool ata_phys_link_online(struct ata_link *link) |
34bf2170 TH |
5415 | { |
5416 | u32 sstatus; | |
5417 | ||
936fd732 | 5418 | if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && |
9913ff8a | 5419 | ata_sstatus_online(sstatus)) |
b5b3fa38 TH |
5420 | return true; |
5421 | return false; | |
34bf2170 TH |
5422 | } |
5423 | ||
5424 | /** | |
b1c72916 | 5425 | * ata_phys_link_offline - test whether the given link is offline |
936fd732 | 5426 | * @link: ATA link to test |
34bf2170 | 5427 | * |
936fd732 TH |
5428 | * Test whether @link is offline. Note that this function |
5429 | * returns 0 if offline status of @link cannot be obtained, so | |
5430 | * ata_link_online(link) != !ata_link_offline(link). | |
34bf2170 TH |
5431 | * |
5432 | * LOCKING: | |
5433 | * None. | |
5434 | * | |
5435 | * RETURNS: | |
b5b3fa38 | 5436 | * True if the port offline status is available and offline. |
34bf2170 | 5437 | */ |
b1c72916 | 5438 | bool ata_phys_link_offline(struct ata_link *link) |
34bf2170 TH |
5439 | { |
5440 | u32 sstatus; | |
5441 | ||
936fd732 | 5442 | if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && |
9913ff8a | 5443 | !ata_sstatus_online(sstatus)) |
b5b3fa38 TH |
5444 | return true; |
5445 | return false; | |
34bf2170 | 5446 | } |
0baab86b | 5447 | |
b1c72916 TH |
5448 | /** |
5449 | * ata_link_online - test whether the given link is online | |
5450 | * @link: ATA link to test | |
5451 | * | |
5452 | * Test whether @link is online. This is identical to | |
5453 | * ata_phys_link_online() when there's no slave link. When | |
5454 | * there's a slave link, this function should only be called on | |
5455 | * the master link and will return true if any of M/S links is | |
5456 | * online. | |
5457 | * | |
5458 | * LOCKING: | |
5459 | * None. | |
5460 | * | |
5461 | * RETURNS: | |
5462 | * True if the port online status is available and online. | |
5463 | */ | |
5464 | bool ata_link_online(struct ata_link *link) | |
5465 | { | |
5466 | struct ata_link *slave = link->ap->slave_link; | |
5467 | ||
5468 | WARN_ON(link == slave); /* shouldn't be called on slave link */ | |
5469 | ||
5470 | return ata_phys_link_online(link) || | |
5471 | (slave && ata_phys_link_online(slave)); | |
5472 | } | |
5473 | ||
5474 | /** | |
5475 | * ata_link_offline - test whether the given link is offline | |
5476 | * @link: ATA link to test | |
5477 | * | |
5478 | * Test whether @link is offline. This is identical to | |
5479 | * ata_phys_link_offline() when there's no slave link. When | |
5480 | * there's a slave link, this function should only be called on | |
5481 | * the master link and will return true if both M/S links are | |
5482 | * offline. | |
5483 | * | |
5484 | * LOCKING: | |
5485 | * None. | |
5486 | * | |
5487 | * RETURNS: | |
5488 | * True if the port offline status is available and offline. | |
5489 | */ | |
5490 | bool ata_link_offline(struct ata_link *link) | |
5491 | { | |
5492 | struct ata_link *slave = link->ap->slave_link; | |
5493 | ||
5494 | WARN_ON(link == slave); /* shouldn't be called on slave link */ | |
5495 | ||
5496 | return ata_phys_link_offline(link) && | |
5497 | (!slave || ata_phys_link_offline(slave)); | |
5498 | } | |
5499 | ||
6ffa01d8 | 5500 | #ifdef CONFIG_PM |
bc6e7c4b DW |
5501 | static void ata_port_request_pm(struct ata_port *ap, pm_message_t mesg, |
5502 | unsigned int action, unsigned int ehi_flags, | |
5503 | bool async) | |
500530f6 | 5504 | { |
5ef41082 | 5505 | struct ata_link *link; |
500530f6 | 5506 | unsigned long flags; |
500530f6 | 5507 | |
5ef41082 LM |
5508 | /* Previous resume operation might still be in |
5509 | * progress. Wait for PM_PENDING to clear. | |
5510 | */ | |
5511 | if (ap->pflags & ATA_PFLAG_PM_PENDING) { | |
5512 | ata_port_wait_eh(ap); | |
5513 | WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); | |
5514 | } | |
500530f6 | 5515 | |
5ef41082 LM |
5516 | /* request PM ops to EH */ |
5517 | spin_lock_irqsave(ap->lock, flags); | |
500530f6 | 5518 | |
5ef41082 | 5519 | ap->pm_mesg = mesg; |
5ef41082 LM |
5520 | ap->pflags |= ATA_PFLAG_PM_PENDING; |
5521 | ata_for_each_link(link, ap, HOST_FIRST) { | |
5522 | link->eh_info.action |= action; | |
5523 | link->eh_info.flags |= ehi_flags; | |
5524 | } | |
500530f6 | 5525 | |
5ef41082 | 5526 | ata_port_schedule_eh(ap); |
500530f6 | 5527 | |
5ef41082 | 5528 | spin_unlock_irqrestore(ap->lock, flags); |
500530f6 | 5529 | |
2fcbdcb4 | 5530 | if (!async) { |
5ef41082 LM |
5531 | ata_port_wait_eh(ap); |
5532 | WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); | |
500530f6 | 5533 | } |
500530f6 TH |
5534 | } |
5535 | ||
bc6e7c4b DW |
5536 | /* |
5537 | * On some hardware, device fails to respond after spun down for suspend. As | |
5538 | * the device won't be used before being resumed, we don't need to touch the | |
5539 | * device. Ask EH to skip the usual stuff and proceed directly to suspend. | |
5540 | * | |
5541 | * http://thread.gmane.org/gmane.linux.ide/46764 | |
5542 | */ | |
5543 | static const unsigned int ata_port_suspend_ehi = ATA_EHI_QUIET | |
5544 | | ATA_EHI_NO_AUTOPSY | |
5545 | | ATA_EHI_NO_RECOVERY; | |
5546 | ||
5547 | static void ata_port_suspend(struct ata_port *ap, pm_message_t mesg) | |
5ef41082 | 5548 | { |
bc6e7c4b | 5549 | ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, false); |
5ef41082 LM |
5550 | } |
5551 | ||
bc6e7c4b | 5552 | static void ata_port_suspend_async(struct ata_port *ap, pm_message_t mesg) |
2fcbdcb4 | 5553 | { |
bc6e7c4b | 5554 | ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, true); |
2fcbdcb4 DW |
5555 | } |
5556 | ||
bc6e7c4b | 5557 | static int ata_port_pm_suspend(struct device *dev) |
5ef41082 | 5558 | { |
bc6e7c4b DW |
5559 | struct ata_port *ap = to_ata_port(dev); |
5560 | ||
5ef41082 LM |
5561 | if (pm_runtime_suspended(dev)) |
5562 | return 0; | |
5563 | ||
bc6e7c4b DW |
5564 | ata_port_suspend(ap, PMSG_SUSPEND); |
5565 | return 0; | |
33574d68 LM |
5566 | } |
5567 | ||
bc6e7c4b | 5568 | static int ata_port_pm_freeze(struct device *dev) |
33574d68 | 5569 | { |
bc6e7c4b DW |
5570 | struct ata_port *ap = to_ata_port(dev); |
5571 | ||
33574d68 | 5572 | if (pm_runtime_suspended(dev)) |
f5e6d0d0 | 5573 | return 0; |
33574d68 | 5574 | |
bc6e7c4b DW |
5575 | ata_port_suspend(ap, PMSG_FREEZE); |
5576 | return 0; | |
33574d68 LM |
5577 | } |
5578 | ||
bc6e7c4b | 5579 | static int ata_port_pm_poweroff(struct device *dev) |
33574d68 | 5580 | { |
bc6e7c4b DW |
5581 | ata_port_suspend(to_ata_port(dev), PMSG_HIBERNATE); |
5582 | return 0; | |
5ef41082 LM |
5583 | } |
5584 | ||
bc6e7c4b DW |
5585 | static const unsigned int ata_port_resume_ehi = ATA_EHI_NO_AUTOPSY |
5586 | | ATA_EHI_QUIET; | |
5ef41082 | 5587 | |
bc6e7c4b DW |
5588 | static void ata_port_resume(struct ata_port *ap, pm_message_t mesg) |
5589 | { | |
5590 | ata_port_request_pm(ap, mesg, ATA_EH_RESET, ata_port_resume_ehi, false); | |
5ef41082 LM |
5591 | } |
5592 | ||
bc6e7c4b | 5593 | static void ata_port_resume_async(struct ata_port *ap, pm_message_t mesg) |
2fcbdcb4 | 5594 | { |
bc6e7c4b | 5595 | ata_port_request_pm(ap, mesg, ATA_EH_RESET, ata_port_resume_ehi, true); |
2fcbdcb4 DW |
5596 | } |
5597 | ||
bc6e7c4b | 5598 | static int ata_port_pm_resume(struct device *dev) |
e90b1e5a | 5599 | { |
200421a8 | 5600 | ata_port_resume_async(to_ata_port(dev), PMSG_RESUME); |
bc6e7c4b DW |
5601 | pm_runtime_disable(dev); |
5602 | pm_runtime_set_active(dev); | |
5603 | pm_runtime_enable(dev); | |
5604 | return 0; | |
e90b1e5a LM |
5605 | } |
5606 | ||
7e15e9be AL |
5607 | /* |
5608 | * For ODDs, the upper layer will poll for media change every few seconds, | |
5609 | * which will make it enter and leave suspend state every few seconds. And | |
5610 | * as each suspend will cause a hard/soft reset, the gain of runtime suspend | |
5611 | * is very little and the ODD may malfunction after constantly being reset. | |
5612 | * So the idle callback here will not proceed to suspend if a non-ZPODD capable | |
5613 | * ODD is attached to the port. | |
5614 | */ | |
9ee4f393 LM |
5615 | static int ata_port_runtime_idle(struct device *dev) |
5616 | { | |
7e15e9be AL |
5617 | struct ata_port *ap = to_ata_port(dev); |
5618 | struct ata_link *link; | |
5619 | struct ata_device *adev; | |
5620 | ||
5621 | ata_for_each_link(link, ap, HOST_FIRST) { | |
5622 | ata_for_each_dev(adev, link, ENABLED) | |
5623 | if (adev->class == ATA_DEV_ATAPI && | |
5624 | !zpodd_dev_enabled(adev)) | |
5625 | return -EBUSY; | |
5626 | } | |
5627 | ||
45f0a85c | 5628 | return 0; |
9ee4f393 LM |
5629 | } |
5630 | ||
a7ff60db AL |
5631 | static int ata_port_runtime_suspend(struct device *dev) |
5632 | { | |
bc6e7c4b DW |
5633 | ata_port_suspend(to_ata_port(dev), PMSG_AUTO_SUSPEND); |
5634 | return 0; | |
a7ff60db AL |
5635 | } |
5636 | ||
5637 | static int ata_port_runtime_resume(struct device *dev) | |
5638 | { | |
bc6e7c4b DW |
5639 | ata_port_resume(to_ata_port(dev), PMSG_AUTO_RESUME); |
5640 | return 0; | |
a7ff60db AL |
5641 | } |
5642 | ||
5ef41082 | 5643 | static const struct dev_pm_ops ata_port_pm_ops = { |
bc6e7c4b DW |
5644 | .suspend = ata_port_pm_suspend, |
5645 | .resume = ata_port_pm_resume, | |
5646 | .freeze = ata_port_pm_freeze, | |
5647 | .thaw = ata_port_pm_resume, | |
5648 | .poweroff = ata_port_pm_poweroff, | |
5649 | .restore = ata_port_pm_resume, | |
9ee4f393 | 5650 | |
a7ff60db AL |
5651 | .runtime_suspend = ata_port_runtime_suspend, |
5652 | .runtime_resume = ata_port_runtime_resume, | |
9ee4f393 | 5653 | .runtime_idle = ata_port_runtime_idle, |
5ef41082 LM |
5654 | }; |
5655 | ||
2fcbdcb4 DW |
5656 | /* sas ports don't participate in pm runtime management of ata_ports, |
5657 | * and need to resume ata devices at the domain level, not the per-port | |
5658 | * level. sas suspend/resume is async to allow parallel port recovery | |
5659 | * since sas has multiple ata_port instances per Scsi_Host. | |
5660 | */ | |
bc6e7c4b | 5661 | void ata_sas_port_suspend(struct ata_port *ap) |
2fcbdcb4 | 5662 | { |
bc6e7c4b | 5663 | ata_port_suspend_async(ap, PMSG_SUSPEND); |
2fcbdcb4 | 5664 | } |
bc6e7c4b | 5665 | EXPORT_SYMBOL_GPL(ata_sas_port_suspend); |
2fcbdcb4 | 5666 | |
bc6e7c4b | 5667 | void ata_sas_port_resume(struct ata_port *ap) |
2fcbdcb4 | 5668 | { |
bc6e7c4b | 5669 | ata_port_resume_async(ap, PMSG_RESUME); |
2fcbdcb4 | 5670 | } |
bc6e7c4b | 5671 | EXPORT_SYMBOL_GPL(ata_sas_port_resume); |
2fcbdcb4 | 5672 | |
500530f6 | 5673 | /** |
cca3974e JG |
5674 | * ata_host_suspend - suspend host |
5675 | * @host: host to suspend | |
500530f6 TH |
5676 | * @mesg: PM message |
5677 | * | |
5ef41082 | 5678 | * Suspend @host. Actual operation is performed by port suspend. |
500530f6 | 5679 | */ |
cca3974e | 5680 | int ata_host_suspend(struct ata_host *host, pm_message_t mesg) |
500530f6 | 5681 | { |
5ef41082 LM |
5682 | host->dev->power.power_state = mesg; |
5683 | return 0; | |
500530f6 TH |
5684 | } |
5685 | ||
5686 | /** | |
cca3974e JG |
5687 | * ata_host_resume - resume host |
5688 | * @host: host to resume | |
500530f6 | 5689 | * |
5ef41082 | 5690 | * Resume @host. Actual operation is performed by port resume. |
500530f6 | 5691 | */ |
cca3974e | 5692 | void ata_host_resume(struct ata_host *host) |
500530f6 | 5693 | { |
72ad6ec4 | 5694 | host->dev->power.power_state = PMSG_ON; |
500530f6 | 5695 | } |
6ffa01d8 | 5696 | #endif |
500530f6 | 5697 | |
5ef41082 LM |
5698 | struct device_type ata_port_type = { |
5699 | .name = "ata_port", | |
5700 | #ifdef CONFIG_PM | |
5701 | .pm = &ata_port_pm_ops, | |
5702 | #endif | |
5703 | }; | |
5704 | ||
3ef3b43d TH |
5705 | /** |
5706 | * ata_dev_init - Initialize an ata_device structure | |
5707 | * @dev: Device structure to initialize | |
5708 | * | |
5709 | * Initialize @dev in preparation for probing. | |
5710 | * | |
5711 | * LOCKING: | |
5712 | * Inherited from caller. | |
5713 | */ | |
5714 | void ata_dev_init(struct ata_device *dev) | |
5715 | { | |
b1c72916 | 5716 | struct ata_link *link = ata_dev_phys_link(dev); |
9af5c9c9 | 5717 | struct ata_port *ap = link->ap; |
72fa4b74 TH |
5718 | unsigned long flags; |
5719 | ||
b1c72916 | 5720 | /* SATA spd limit is bound to the attached device, reset together */ |
9af5c9c9 TH |
5721 | link->sata_spd_limit = link->hw_sata_spd_limit; |
5722 | link->sata_spd = 0; | |
5a04bf4b | 5723 | |
72fa4b74 TH |
5724 | /* High bits of dev->flags are used to record warm plug |
5725 | * requests which occur asynchronously. Synchronize using | |
cca3974e | 5726 | * host lock. |
72fa4b74 | 5727 | */ |
ba6a1308 | 5728 | spin_lock_irqsave(ap->lock, flags); |
72fa4b74 | 5729 | dev->flags &= ~ATA_DFLAG_INIT_MASK; |
3dcc323f | 5730 | dev->horkage = 0; |
ba6a1308 | 5731 | spin_unlock_irqrestore(ap->lock, flags); |
3ef3b43d | 5732 | |
99cf610a TH |
5733 | memset((void *)dev + ATA_DEVICE_CLEAR_BEGIN, 0, |
5734 | ATA_DEVICE_CLEAR_END - ATA_DEVICE_CLEAR_BEGIN); | |
3ef3b43d TH |
5735 | dev->pio_mask = UINT_MAX; |
5736 | dev->mwdma_mask = UINT_MAX; | |
5737 | dev->udma_mask = UINT_MAX; | |
5738 | } | |
5739 | ||
4fb37a25 TH |
5740 | /** |
5741 | * ata_link_init - Initialize an ata_link structure | |
5742 | * @ap: ATA port link is attached to | |
5743 | * @link: Link structure to initialize | |
8989805d | 5744 | * @pmp: Port multiplier port number |
4fb37a25 TH |
5745 | * |
5746 | * Initialize @link. | |
5747 | * | |
5748 | * LOCKING: | |
5749 | * Kernel thread context (may sleep) | |
5750 | */ | |
fb7fd614 | 5751 | void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp) |
4fb37a25 TH |
5752 | { |
5753 | int i; | |
5754 | ||
5755 | /* clear everything except for devices */ | |
d9027470 GG |
5756 | memset((void *)link + ATA_LINK_CLEAR_BEGIN, 0, |
5757 | ATA_LINK_CLEAR_END - ATA_LINK_CLEAR_BEGIN); | |
4fb37a25 TH |
5758 | |
5759 | link->ap = ap; | |
8989805d | 5760 | link->pmp = pmp; |
4fb37a25 TH |
5761 | link->active_tag = ATA_TAG_POISON; |
5762 | link->hw_sata_spd_limit = UINT_MAX; | |
5763 | ||
5764 | /* can't use iterator, ap isn't initialized yet */ | |
5765 | for (i = 0; i < ATA_MAX_DEVICES; i++) { | |
5766 | struct ata_device *dev = &link->device[i]; | |
5767 | ||
5768 | dev->link = link; | |
5769 | dev->devno = dev - link->device; | |
110f66d2 TH |
5770 | #ifdef CONFIG_ATA_ACPI |
5771 | dev->gtf_filter = ata_acpi_gtf_filter; | |
5772 | #endif | |
4fb37a25 TH |
5773 | ata_dev_init(dev); |
5774 | } | |
5775 | } | |
5776 | ||
5777 | /** | |
5778 | * sata_link_init_spd - Initialize link->sata_spd_limit | |
5779 | * @link: Link to configure sata_spd_limit for | |
5780 | * | |
5781 | * Initialize @link->[hw_]sata_spd_limit to the currently | |
5782 | * configured value. | |
5783 | * | |
5784 | * LOCKING: | |
5785 | * Kernel thread context (may sleep). | |
5786 | * | |
5787 | * RETURNS: | |
5788 | * 0 on success, -errno on failure. | |
5789 | */ | |
fb7fd614 | 5790 | int sata_link_init_spd(struct ata_link *link) |
4fb37a25 | 5791 | { |
33267325 | 5792 | u8 spd; |
4fb37a25 TH |
5793 | int rc; |
5794 | ||
d127ea7b | 5795 | rc = sata_scr_read(link, SCR_CONTROL, &link->saved_scontrol); |
4fb37a25 TH |
5796 | if (rc) |
5797 | return rc; | |
5798 | ||
d127ea7b | 5799 | spd = (link->saved_scontrol >> 4) & 0xf; |
4fb37a25 TH |
5800 | if (spd) |
5801 | link->hw_sata_spd_limit &= (1 << spd) - 1; | |
5802 | ||
05944bdf | 5803 | ata_force_link_limits(link); |
33267325 | 5804 | |
4fb37a25 TH |
5805 | link->sata_spd_limit = link->hw_sata_spd_limit; |
5806 | ||
5807 | return 0; | |
5808 | } | |
5809 | ||
1da177e4 | 5810 | /** |
f3187195 TH |
5811 | * ata_port_alloc - allocate and initialize basic ATA port resources |
5812 | * @host: ATA host this allocated port belongs to | |
1da177e4 | 5813 | * |
f3187195 TH |
5814 | * Allocate and initialize basic ATA port resources. |
5815 | * | |
5816 | * RETURNS: | |
5817 | * Allocate ATA port on success, NULL on failure. | |
0cba632b | 5818 | * |
1da177e4 | 5819 | * LOCKING: |
f3187195 | 5820 | * Inherited from calling layer (may sleep). |
1da177e4 | 5821 | */ |
f3187195 | 5822 | struct ata_port *ata_port_alloc(struct ata_host *host) |
1da177e4 | 5823 | { |
f3187195 | 5824 | struct ata_port *ap; |
1da177e4 | 5825 | |
f3187195 TH |
5826 | DPRINTK("ENTER\n"); |
5827 | ||
5828 | ap = kzalloc(sizeof(*ap), GFP_KERNEL); | |
5829 | if (!ap) | |
5830 | return NULL; | |
4fca377f | 5831 | |
7b3a24c5 | 5832 | ap->pflags |= ATA_PFLAG_INITIALIZING | ATA_PFLAG_FROZEN; |
cca3974e | 5833 | ap->lock = &host->lock; |
f3187195 | 5834 | ap->print_id = -1; |
e628dc99 | 5835 | ap->local_port_no = -1; |
cca3974e | 5836 | ap->host = host; |
f3187195 | 5837 | ap->dev = host->dev; |
bd5d825c BP |
5838 | |
5839 | #if defined(ATA_VERBOSE_DEBUG) | |
5840 | /* turn on all debugging levels */ | |
5841 | ap->msg_enable = 0x00FF; | |
5842 | #elif defined(ATA_DEBUG) | |
5843 | ap->msg_enable = ATA_MSG_DRV | ATA_MSG_INFO | ATA_MSG_CTL | ATA_MSG_WARN | ATA_MSG_ERR; | |
88574551 | 5844 | #else |
0dd4b21f | 5845 | ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN; |
bd5d825c | 5846 | #endif |
1da177e4 | 5847 | |
ad72cf98 | 5848 | mutex_init(&ap->scsi_scan_mutex); |
65f27f38 DH |
5849 | INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug); |
5850 | INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan); | |
a72ec4ce | 5851 | INIT_LIST_HEAD(&ap->eh_done_q); |
c6cf9e99 | 5852 | init_waitqueue_head(&ap->eh_wait_q); |
45fabbb7 | 5853 | init_completion(&ap->park_req_pending); |
5ddf24c5 TH |
5854 | init_timer_deferrable(&ap->fastdrain_timer); |
5855 | ap->fastdrain_timer.function = ata_eh_fastdrain_timerfn; | |
5856 | ap->fastdrain_timer.data = (unsigned long)ap; | |
1da177e4 | 5857 | |
838df628 | 5858 | ap->cbl = ATA_CBL_NONE; |
838df628 | 5859 | |
8989805d | 5860 | ata_link_init(ap, &ap->link, 0); |
1da177e4 LT |
5861 | |
5862 | #ifdef ATA_IRQ_TRAP | |
5863 | ap->stats.unhandled_irq = 1; | |
5864 | ap->stats.idle_irq = 1; | |
5865 | #endif | |
270390e1 TH |
5866 | ata_sff_port_init(ap); |
5867 | ||
1da177e4 | 5868 | return ap; |
1da177e4 LT |
5869 | } |
5870 | ||
f0d36efd TH |
5871 | static void ata_host_release(struct device *gendev, void *res) |
5872 | { | |
5873 | struct ata_host *host = dev_get_drvdata(gendev); | |
5874 | int i; | |
5875 | ||
1aa506e4 TH |
5876 | for (i = 0; i < host->n_ports; i++) { |
5877 | struct ata_port *ap = host->ports[i]; | |
5878 | ||
4911487a TH |
5879 | if (!ap) |
5880 | continue; | |
5881 | ||
5882 | if (ap->scsi_host) | |
1aa506e4 TH |
5883 | scsi_host_put(ap->scsi_host); |
5884 | ||
633273a3 | 5885 | kfree(ap->pmp_link); |
b1c72916 | 5886 | kfree(ap->slave_link); |
4911487a | 5887 | kfree(ap); |
1aa506e4 TH |
5888 | host->ports[i] = NULL; |
5889 | } | |
5890 | ||
1aa56cca | 5891 | dev_set_drvdata(gendev, NULL); |
f0d36efd TH |
5892 | } |
5893 | ||
f3187195 TH |
5894 | /** |
5895 | * ata_host_alloc - allocate and init basic ATA host resources | |
5896 | * @dev: generic device this host is associated with | |
5897 | * @max_ports: maximum number of ATA ports associated with this host | |
5898 | * | |
5899 | * Allocate and initialize basic ATA host resources. LLD calls | |
5900 | * this function to allocate a host, initializes it fully and | |
5901 | * attaches it using ata_host_register(). | |
5902 | * | |
5903 | * @max_ports ports are allocated and host->n_ports is | |
5904 | * initialized to @max_ports. The caller is allowed to decrease | |
5905 | * host->n_ports before calling ata_host_register(). The unused | |
5906 | * ports will be automatically freed on registration. | |
5907 | * | |
5908 | * RETURNS: | |
5909 | * Allocate ATA host on success, NULL on failure. | |
5910 | * | |
5911 | * LOCKING: | |
5912 | * Inherited from calling layer (may sleep). | |
5913 | */ | |
5914 | struct ata_host *ata_host_alloc(struct device *dev, int max_ports) | |
5915 | { | |
5916 | struct ata_host *host; | |
5917 | size_t sz; | |
5918 | int i; | |
5919 | ||
5920 | DPRINTK("ENTER\n"); | |
5921 | ||
5922 | if (!devres_open_group(dev, NULL, GFP_KERNEL)) | |
5923 | return NULL; | |
5924 | ||
5925 | /* alloc a container for our list of ATA ports (buses) */ | |
5926 | sz = sizeof(struct ata_host) + (max_ports + 1) * sizeof(void *); | |
5927 | /* alloc a container for our list of ATA ports (buses) */ | |
5928 | host = devres_alloc(ata_host_release, sz, GFP_KERNEL); | |
5929 | if (!host) | |
5930 | goto err_out; | |
5931 | ||
5932 | devres_add(dev, host); | |
5933 | dev_set_drvdata(dev, host); | |
5934 | ||
5935 | spin_lock_init(&host->lock); | |
c0c362b6 | 5936 | mutex_init(&host->eh_mutex); |
f3187195 TH |
5937 | host->dev = dev; |
5938 | host->n_ports = max_ports; | |
5939 | ||
5940 | /* allocate ports bound to this host */ | |
5941 | for (i = 0; i < max_ports; i++) { | |
5942 | struct ata_port *ap; | |
5943 | ||
5944 | ap = ata_port_alloc(host); | |
5945 | if (!ap) | |
5946 | goto err_out; | |
5947 | ||
5948 | ap->port_no = i; | |
5949 | host->ports[i] = ap; | |
5950 | } | |
5951 | ||
5952 | devres_remove_group(dev, NULL); | |
5953 | return host; | |
5954 | ||
5955 | err_out: | |
5956 | devres_release_group(dev, NULL); | |
5957 | return NULL; | |
5958 | } | |
5959 | ||
f5cda257 TH |
5960 | /** |
5961 | * ata_host_alloc_pinfo - alloc host and init with port_info array | |
5962 | * @dev: generic device this host is associated with | |
5963 | * @ppi: array of ATA port_info to initialize host with | |
5964 | * @n_ports: number of ATA ports attached to this host | |
5965 | * | |
5966 | * Allocate ATA host and initialize with info from @ppi. If NULL | |
5967 | * terminated, @ppi may contain fewer entries than @n_ports. The | |
5968 | * last entry will be used for the remaining ports. | |
5969 | * | |
5970 | * RETURNS: | |
5971 | * Allocate ATA host on success, NULL on failure. | |
5972 | * | |
5973 | * LOCKING: | |
5974 | * Inherited from calling layer (may sleep). | |
5975 | */ | |
5976 | struct ata_host *ata_host_alloc_pinfo(struct device *dev, | |
5977 | const struct ata_port_info * const * ppi, | |
5978 | int n_ports) | |
5979 | { | |
5980 | const struct ata_port_info *pi; | |
5981 | struct ata_host *host; | |
5982 | int i, j; | |
5983 | ||
5984 | host = ata_host_alloc(dev, n_ports); | |
5985 | if (!host) | |
5986 | return NULL; | |
5987 | ||
5988 | for (i = 0, j = 0, pi = NULL; i < host->n_ports; i++) { | |
5989 | struct ata_port *ap = host->ports[i]; | |
5990 | ||
5991 | if (ppi[j]) | |
5992 | pi = ppi[j++]; | |
5993 | ||
5994 | ap->pio_mask = pi->pio_mask; | |
5995 | ap->mwdma_mask = pi->mwdma_mask; | |
5996 | ap->udma_mask = pi->udma_mask; | |
5997 | ap->flags |= pi->flags; | |
0c88758b | 5998 | ap->link.flags |= pi->link_flags; |
f5cda257 TH |
5999 | ap->ops = pi->port_ops; |
6000 | ||
6001 | if (!host->ops && (pi->port_ops != &ata_dummy_port_ops)) | |
6002 | host->ops = pi->port_ops; | |
f5cda257 TH |
6003 | } |
6004 | ||
6005 | return host; | |
6006 | } | |
6007 | ||
b1c72916 TH |
6008 | /** |
6009 | * ata_slave_link_init - initialize slave link | |
6010 | * @ap: port to initialize slave link for | |
6011 | * | |
6012 | * Create and initialize slave link for @ap. This enables slave | |
6013 | * link handling on the port. | |
6014 | * | |
6015 | * In libata, a port contains links and a link contains devices. | |
6016 | * There is single host link but if a PMP is attached to it, | |
6017 | * there can be multiple fan-out links. On SATA, there's usually | |
6018 | * a single device connected to a link but PATA and SATA | |
6019 | * controllers emulating TF based interface can have two - master | |
6020 | * and slave. | |
6021 | * | |
6022 | * However, there are a few controllers which don't fit into this | |
6023 | * abstraction too well - SATA controllers which emulate TF | |
6024 | * interface with both master and slave devices but also have | |
6025 | * separate SCR register sets for each device. These controllers | |
6026 | * need separate links for physical link handling | |
6027 | * (e.g. onlineness, link speed) but should be treated like a | |
6028 | * traditional M/S controller for everything else (e.g. command | |
6029 | * issue, softreset). | |
6030 | * | |
6031 | * slave_link is libata's way of handling this class of | |
6032 | * controllers without impacting core layer too much. For | |
6033 | * anything other than physical link handling, the default host | |
6034 | * link is used for both master and slave. For physical link | |
6035 | * handling, separate @ap->slave_link is used. All dirty details | |
6036 | * are implemented inside libata core layer. From LLD's POV, the | |
6037 | * only difference is that prereset, hardreset and postreset are | |
6038 | * called once more for the slave link, so the reset sequence | |
6039 | * looks like the following. | |
6040 | * | |
6041 | * prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> | |
6042 | * softreset(M) -> postreset(M) -> postreset(S) | |
6043 | * | |
6044 | * Note that softreset is called only for the master. Softreset | |
6045 | * resets both M/S by definition, so SRST on master should handle | |
6046 | * both (the standard method will work just fine). | |
6047 | * | |
6048 | * LOCKING: | |
6049 | * Should be called before host is registered. | |
6050 | * | |
6051 | * RETURNS: | |
6052 | * 0 on success, -errno on failure. | |
6053 | */ | |
6054 | int ata_slave_link_init(struct ata_port *ap) | |
6055 | { | |
6056 | struct ata_link *link; | |
6057 | ||
6058 | WARN_ON(ap->slave_link); | |
6059 | WARN_ON(ap->flags & ATA_FLAG_PMP); | |
6060 | ||
6061 | link = kzalloc(sizeof(*link), GFP_KERNEL); | |
6062 | if (!link) | |
6063 | return -ENOMEM; | |
6064 | ||
6065 | ata_link_init(ap, link, 1); | |
6066 | ap->slave_link = link; | |
6067 | return 0; | |
6068 | } | |
6069 | ||
32ebbc0c TH |
6070 | static void ata_host_stop(struct device *gendev, void *res) |
6071 | { | |
6072 | struct ata_host *host = dev_get_drvdata(gendev); | |
6073 | int i; | |
6074 | ||
6075 | WARN_ON(!(host->flags & ATA_HOST_STARTED)); | |
6076 | ||
6077 | for (i = 0; i < host->n_ports; i++) { | |
6078 | struct ata_port *ap = host->ports[i]; | |
6079 | ||
6080 | if (ap->ops->port_stop) | |
6081 | ap->ops->port_stop(ap); | |
6082 | } | |
6083 | ||
6084 | if (host->ops->host_stop) | |
6085 | host->ops->host_stop(host); | |
6086 | } | |
6087 | ||
029cfd6b TH |
6088 | /** |
6089 | * ata_finalize_port_ops - finalize ata_port_operations | |
6090 | * @ops: ata_port_operations to finalize | |
6091 | * | |
6092 | * An ata_port_operations can inherit from another ops and that | |
6093 | * ops can again inherit from another. This can go on as many | |
6094 | * times as necessary as long as there is no loop in the | |
6095 | * inheritance chain. | |
6096 | * | |
6097 | * Ops tables are finalized when the host is started. NULL or | |
6098 | * unspecified entries are inherited from the closet ancestor | |
6099 | * which has the method and the entry is populated with it. | |
6100 | * After finalization, the ops table directly points to all the | |
6101 | * methods and ->inherits is no longer necessary and cleared. | |
6102 | * | |
6103 | * Using ATA_OP_NULL, inheriting ops can force a method to NULL. | |
6104 | * | |
6105 | * LOCKING: | |
6106 | * None. | |
6107 | */ | |
6108 | static void ata_finalize_port_ops(struct ata_port_operations *ops) | |
6109 | { | |
2da67659 | 6110 | static DEFINE_SPINLOCK(lock); |
029cfd6b TH |
6111 | const struct ata_port_operations *cur; |
6112 | void **begin = (void **)ops; | |
6113 | void **end = (void **)&ops->inherits; | |
6114 | void **pp; | |
6115 | ||
6116 | if (!ops || !ops->inherits) | |
6117 | return; | |
6118 | ||
6119 | spin_lock(&lock); | |
6120 | ||
6121 | for (cur = ops->inherits; cur; cur = cur->inherits) { | |
6122 | void **inherit = (void **)cur; | |
6123 | ||
6124 | for (pp = begin; pp < end; pp++, inherit++) | |
6125 | if (!*pp) | |
6126 | *pp = *inherit; | |
6127 | } | |
6128 | ||
6129 | for (pp = begin; pp < end; pp++) | |
6130 | if (IS_ERR(*pp)) | |
6131 | *pp = NULL; | |
6132 | ||
6133 | ops->inherits = NULL; | |
6134 | ||
6135 | spin_unlock(&lock); | |
6136 | } | |
6137 | ||
ecef7253 TH |
6138 | /** |
6139 | * ata_host_start - start and freeze ports of an ATA host | |
6140 | * @host: ATA host to start ports for | |
6141 | * | |
6142 | * Start and then freeze ports of @host. Started status is | |
6143 | * recorded in host->flags, so this function can be called | |
6144 | * multiple times. Ports are guaranteed to get started only | |
f3187195 TH |
6145 | * once. If host->ops isn't initialized yet, its set to the |
6146 | * first non-dummy port ops. | |
ecef7253 TH |
6147 | * |
6148 | * LOCKING: | |
6149 | * Inherited from calling layer (may sleep). | |
6150 | * | |
6151 | * RETURNS: | |
6152 | * 0 if all ports are started successfully, -errno otherwise. | |
6153 | */ | |
6154 | int ata_host_start(struct ata_host *host) | |
6155 | { | |
32ebbc0c TH |
6156 | int have_stop = 0; |
6157 | void *start_dr = NULL; | |
ecef7253 TH |
6158 | int i, rc; |
6159 | ||
6160 | if (host->flags & ATA_HOST_STARTED) | |
6161 | return 0; | |
6162 | ||
029cfd6b TH |
6163 | ata_finalize_port_ops(host->ops); |
6164 | ||
ecef7253 TH |
6165 | for (i = 0; i < host->n_ports; i++) { |
6166 | struct ata_port *ap = host->ports[i]; | |
6167 | ||
029cfd6b TH |
6168 | ata_finalize_port_ops(ap->ops); |
6169 | ||
f3187195 TH |
6170 | if (!host->ops && !ata_port_is_dummy(ap)) |
6171 | host->ops = ap->ops; | |
6172 | ||
32ebbc0c TH |
6173 | if (ap->ops->port_stop) |
6174 | have_stop = 1; | |
6175 | } | |
6176 | ||
6177 | if (host->ops->host_stop) | |
6178 | have_stop = 1; | |
6179 | ||
6180 | if (have_stop) { | |
6181 | start_dr = devres_alloc(ata_host_stop, 0, GFP_KERNEL); | |
6182 | if (!start_dr) | |
6183 | return -ENOMEM; | |
6184 | } | |
6185 | ||
6186 | for (i = 0; i < host->n_ports; i++) { | |
6187 | struct ata_port *ap = host->ports[i]; | |
6188 | ||
ecef7253 TH |
6189 | if (ap->ops->port_start) { |
6190 | rc = ap->ops->port_start(ap); | |
6191 | if (rc) { | |
0f9fe9b7 | 6192 | if (rc != -ENODEV) |
a44fec1f JP |
6193 | dev_err(host->dev, |
6194 | "failed to start port %d (errno=%d)\n", | |
6195 | i, rc); | |
ecef7253 TH |
6196 | goto err_out; |
6197 | } | |
6198 | } | |
ecef7253 TH |
6199 | ata_eh_freeze_port(ap); |
6200 | } | |
6201 | ||
32ebbc0c TH |
6202 | if (start_dr) |
6203 | devres_add(host->dev, start_dr); | |
ecef7253 TH |
6204 | host->flags |= ATA_HOST_STARTED; |
6205 | return 0; | |
6206 | ||
6207 | err_out: | |
6208 | while (--i >= 0) { | |
6209 | struct ata_port *ap = host->ports[i]; | |
6210 | ||
6211 | if (ap->ops->port_stop) | |
6212 | ap->ops->port_stop(ap); | |
6213 | } | |
32ebbc0c | 6214 | devres_free(start_dr); |
ecef7253 TH |
6215 | return rc; |
6216 | } | |
6217 | ||
b03732f0 | 6218 | /** |
8d8e7d13 | 6219 | * ata_sas_host_init - Initialize a host struct for sas (ipr, libsas) |
cca3974e JG |
6220 | * @host: host to initialize |
6221 | * @dev: device host is attached to | |
cca3974e | 6222 | * @ops: port_ops |
b03732f0 | 6223 | * |
b03732f0 | 6224 | */ |
cca3974e | 6225 | void ata_host_init(struct ata_host *host, struct device *dev, |
8d8e7d13 | 6226 | struct ata_port_operations *ops) |
b03732f0 | 6227 | { |
cca3974e | 6228 | spin_lock_init(&host->lock); |
c0c362b6 | 6229 | mutex_init(&host->eh_mutex); |
1a112d10 | 6230 | host->n_tags = ATA_MAX_QUEUE - 1; |
cca3974e | 6231 | host->dev = dev; |
cca3974e | 6232 | host->ops = ops; |
b03732f0 BK |
6233 | } |
6234 | ||
9508a66f | 6235 | void __ata_port_probe(struct ata_port *ap) |
79318057 | 6236 | { |
9508a66f DW |
6237 | struct ata_eh_info *ehi = &ap->link.eh_info; |
6238 | unsigned long flags; | |
886ad09f | 6239 | |
9508a66f DW |
6240 | /* kick EH for boot probing */ |
6241 | spin_lock_irqsave(ap->lock, flags); | |
79318057 | 6242 | |
9508a66f DW |
6243 | ehi->probe_mask |= ATA_ALL_DEVICES; |
6244 | ehi->action |= ATA_EH_RESET; | |
6245 | ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; | |
79318057 | 6246 | |
9508a66f DW |
6247 | ap->pflags &= ~ATA_PFLAG_INITIALIZING; |
6248 | ap->pflags |= ATA_PFLAG_LOADING; | |
6249 | ata_port_schedule_eh(ap); | |
79318057 | 6250 | |
9508a66f DW |
6251 | spin_unlock_irqrestore(ap->lock, flags); |
6252 | } | |
79318057 | 6253 | |
9508a66f DW |
6254 | int ata_port_probe(struct ata_port *ap) |
6255 | { | |
6256 | int rc = 0; | |
79318057 | 6257 | |
9508a66f DW |
6258 | if (ap->ops->error_handler) { |
6259 | __ata_port_probe(ap); | |
79318057 AV |
6260 | ata_port_wait_eh(ap); |
6261 | } else { | |
6262 | DPRINTK("ata%u: bus probe begin\n", ap->print_id); | |
6263 | rc = ata_bus_probe(ap); | |
6264 | DPRINTK("ata%u: bus probe end\n", ap->print_id); | |
79318057 | 6265 | } |
238c9cf9 JB |
6266 | return rc; |
6267 | } | |
6268 | ||
6269 | ||
6270 | static void async_port_probe(void *data, async_cookie_t cookie) | |
6271 | { | |
6272 | struct ata_port *ap = data; | |
4fca377f | 6273 | |
238c9cf9 JB |
6274 | /* |
6275 | * If we're not allowed to scan this host in parallel, | |
6276 | * we need to wait until all previous scans have completed | |
6277 | * before going further. | |
6278 | * Jeff Garzik says this is only within a controller, so we | |
6279 | * don't need to wait for port 0, only for later ports. | |
6280 | */ | |
6281 | if (!(ap->host->flags & ATA_HOST_PARALLEL_SCAN) && ap->port_no != 0) | |
6282 | async_synchronize_cookie(cookie); | |
6283 | ||
6284 | (void)ata_port_probe(ap); | |
f29d3b23 AV |
6285 | |
6286 | /* in order to keep device order, we need to synchronize at this point */ | |
6287 | async_synchronize_cookie(cookie); | |
6288 | ||
6289 | ata_scsi_scan_host(ap, 1); | |
79318057 | 6290 | } |
238c9cf9 | 6291 | |
f3187195 TH |
6292 | /** |
6293 | * ata_host_register - register initialized ATA host | |
6294 | * @host: ATA host to register | |
6295 | * @sht: template for SCSI host | |
6296 | * | |
6297 | * Register initialized ATA host. @host is allocated using | |
6298 | * ata_host_alloc() and fully initialized by LLD. This function | |
6299 | * starts ports, registers @host with ATA and SCSI layers and | |
6300 | * probe registered devices. | |
6301 | * | |
6302 | * LOCKING: | |
6303 | * Inherited from calling layer (may sleep). | |
6304 | * | |
6305 | * RETURNS: | |
6306 | * 0 on success, -errno otherwise. | |
6307 | */ | |
6308 | int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) | |
6309 | { | |
6310 | int i, rc; | |
6311 | ||
1a112d10 | 6312 | host->n_tags = clamp(sht->can_queue, 1, ATA_MAX_QUEUE - 1); |
1871ee13 | 6313 | |
f3187195 TH |
6314 | /* host must have been started */ |
6315 | if (!(host->flags & ATA_HOST_STARTED)) { | |
a44fec1f | 6316 | dev_err(host->dev, "BUG: trying to register unstarted host\n"); |
f3187195 TH |
6317 | WARN_ON(1); |
6318 | return -EINVAL; | |
6319 | } | |
6320 | ||
6321 | /* Blow away unused ports. This happens when LLD can't | |
6322 | * determine the exact number of ports to allocate at | |
6323 | * allocation time. | |
6324 | */ | |
6325 | for (i = host->n_ports; host->ports[i]; i++) | |
6326 | kfree(host->ports[i]); | |
6327 | ||
6328 | /* give ports names and add SCSI hosts */ | |
e628dc99 | 6329 | for (i = 0; i < host->n_ports; i++) { |
85d6725b | 6330 | host->ports[i]->print_id = atomic_inc_return(&ata_print_id); |
e628dc99 DM |
6331 | host->ports[i]->local_port_no = i + 1; |
6332 | } | |
4fca377f | 6333 | |
d9027470 GG |
6334 | /* Create associated sysfs transport objects */ |
6335 | for (i = 0; i < host->n_ports; i++) { | |
6336 | rc = ata_tport_add(host->dev,host->ports[i]); | |
6337 | if (rc) { | |
6338 | goto err_tadd; | |
6339 | } | |
6340 | } | |
6341 | ||
f3187195 TH |
6342 | rc = ata_scsi_add_hosts(host, sht); |
6343 | if (rc) | |
d9027470 | 6344 | goto err_tadd; |
f3187195 TH |
6345 | |
6346 | /* set cable, sata_spd_limit and report */ | |
6347 | for (i = 0; i < host->n_ports; i++) { | |
6348 | struct ata_port *ap = host->ports[i]; | |
f3187195 TH |
6349 | unsigned long xfer_mask; |
6350 | ||
6351 | /* set SATA cable type if still unset */ | |
6352 | if (ap->cbl == ATA_CBL_NONE && (ap->flags & ATA_FLAG_SATA)) | |
6353 | ap->cbl = ATA_CBL_SATA; | |
6354 | ||
6355 | /* init sata_spd_limit to the current value */ | |
4fb37a25 | 6356 | sata_link_init_spd(&ap->link); |
b1c72916 TH |
6357 | if (ap->slave_link) |
6358 | sata_link_init_spd(ap->slave_link); | |
f3187195 | 6359 | |
cbcdd875 | 6360 | /* print per-port info to dmesg */ |
f3187195 TH |
6361 | xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask, |
6362 | ap->udma_mask); | |
6363 | ||
abf6e8ed | 6364 | if (!ata_port_is_dummy(ap)) { |
a9a79dfe JP |
6365 | ata_port_info(ap, "%cATA max %s %s\n", |
6366 | (ap->flags & ATA_FLAG_SATA) ? 'S' : 'P', | |
6367 | ata_mode_string(xfer_mask), | |
6368 | ap->link.eh_info.desc); | |
abf6e8ed TH |
6369 | ata_ehi_clear_desc(&ap->link.eh_info); |
6370 | } else | |
a9a79dfe | 6371 | ata_port_info(ap, "DUMMY\n"); |
f3187195 TH |
6372 | } |
6373 | ||
f6005354 | 6374 | /* perform each probe asynchronously */ |
f3187195 TH |
6375 | for (i = 0; i < host->n_ports; i++) { |
6376 | struct ata_port *ap = host->ports[i]; | |
79318057 | 6377 | async_schedule(async_port_probe, ap); |
f3187195 | 6378 | } |
f3187195 TH |
6379 | |
6380 | return 0; | |
d9027470 GG |
6381 | |
6382 | err_tadd: | |
6383 | while (--i >= 0) { | |
6384 | ata_tport_delete(host->ports[i]); | |
6385 | } | |
6386 | return rc; | |
6387 | ||
f3187195 TH |
6388 | } |
6389 | ||
f5cda257 TH |
6390 | /** |
6391 | * ata_host_activate - start host, request IRQ and register it | |
6392 | * @host: target ATA host | |
6393 | * @irq: IRQ to request | |
6394 | * @irq_handler: irq_handler used when requesting IRQ | |
6395 | * @irq_flags: irq_flags used when requesting IRQ | |
6396 | * @sht: scsi_host_template to use when registering the host | |
6397 | * | |
6398 | * After allocating an ATA host and initializing it, most libata | |
6399 | * LLDs perform three steps to activate the host - start host, | |
c9b5560a | 6400 | * request IRQ and register it. This helper takes necessary |
f5cda257 TH |
6401 | * arguments and performs the three steps in one go. |
6402 | * | |
3d46b2e2 PM |
6403 | * An invalid IRQ skips the IRQ registration and expects the host to |
6404 | * have set polling mode on the port. In this case, @irq_handler | |
6405 | * should be NULL. | |
6406 | * | |
f5cda257 TH |
6407 | * LOCKING: |
6408 | * Inherited from calling layer (may sleep). | |
6409 | * | |
6410 | * RETURNS: | |
6411 | * 0 on success, -errno otherwise. | |
6412 | */ | |
6413 | int ata_host_activate(struct ata_host *host, int irq, | |
6414 | irq_handler_t irq_handler, unsigned long irq_flags, | |
6415 | struct scsi_host_template *sht) | |
6416 | { | |
cbcdd875 | 6417 | int i, rc; |
7e22c002 | 6418 | char *irq_desc; |
f5cda257 TH |
6419 | |
6420 | rc = ata_host_start(host); | |
6421 | if (rc) | |
6422 | return rc; | |
6423 | ||
3d46b2e2 PM |
6424 | /* Special case for polling mode */ |
6425 | if (!irq) { | |
6426 | WARN_ON(irq_handler); | |
6427 | return ata_host_register(host, sht); | |
6428 | } | |
6429 | ||
7e22c002 HK |
6430 | irq_desc = devm_kasprintf(host->dev, GFP_KERNEL, "%s[%s]", |
6431 | dev_driver_string(host->dev), | |
6432 | dev_name(host->dev)); | |
6433 | if (!irq_desc) | |
6434 | return -ENOMEM; | |
6435 | ||
f5cda257 | 6436 | rc = devm_request_irq(host->dev, irq, irq_handler, irq_flags, |
7e22c002 | 6437 | irq_desc, host); |
f5cda257 TH |
6438 | if (rc) |
6439 | return rc; | |
6440 | ||
cbcdd875 TH |
6441 | for (i = 0; i < host->n_ports; i++) |
6442 | ata_port_desc(host->ports[i], "irq %d", irq); | |
4031826b | 6443 | |
f5cda257 TH |
6444 | rc = ata_host_register(host, sht); |
6445 | /* if failed, just free the IRQ and leave ports alone */ | |
6446 | if (rc) | |
6447 | devm_free_irq(host->dev, irq, host); | |
6448 | ||
6449 | return rc; | |
6450 | } | |
6451 | ||
720ba126 | 6452 | /** |
c9b5560a | 6453 | * ata_port_detach - Detach ATA port in preparation of device removal |
720ba126 TH |
6454 | * @ap: ATA port to be detached |
6455 | * | |
6456 | * Detach all ATA devices and the associated SCSI devices of @ap; | |
6457 | * then, remove the associated SCSI host. @ap is guaranteed to | |
6458 | * be quiescent on return from this function. | |
6459 | * | |
6460 | * LOCKING: | |
6461 | * Kernel thread context (may sleep). | |
6462 | */ | |
741b7763 | 6463 | static void ata_port_detach(struct ata_port *ap) |
720ba126 TH |
6464 | { |
6465 | unsigned long flags; | |
a6f9bf4d LK |
6466 | struct ata_link *link; |
6467 | struct ata_device *dev; | |
720ba126 TH |
6468 | |
6469 | if (!ap->ops->error_handler) | |
c3cf30a9 | 6470 | goto skip_eh; |
720ba126 TH |
6471 | |
6472 | /* tell EH we're leaving & flush EH */ | |
ba6a1308 | 6473 | spin_lock_irqsave(ap->lock, flags); |
b51e9e5d | 6474 | ap->pflags |= ATA_PFLAG_UNLOADING; |
ece180d1 | 6475 | ata_port_schedule_eh(ap); |
ba6a1308 | 6476 | spin_unlock_irqrestore(ap->lock, flags); |
720ba126 | 6477 | |
ece180d1 | 6478 | /* wait till EH commits suicide */ |
720ba126 TH |
6479 | ata_port_wait_eh(ap); |
6480 | ||
ece180d1 TH |
6481 | /* it better be dead now */ |
6482 | WARN_ON(!(ap->pflags & ATA_PFLAG_UNLOADED)); | |
720ba126 | 6483 | |
afe2c511 | 6484 | cancel_delayed_work_sync(&ap->hotplug_task); |
720ba126 | 6485 | |
c3cf30a9 | 6486 | skip_eh: |
a6f9bf4d LK |
6487 | /* clean up zpodd on port removal */ |
6488 | ata_for_each_link(link, ap, HOST_FIRST) { | |
6489 | ata_for_each_dev(dev, link, ALL) { | |
6490 | if (zpodd_dev_enabled(dev)) | |
6491 | zpodd_exit(dev); | |
6492 | } | |
6493 | } | |
d9027470 GG |
6494 | if (ap->pmp_link) { |
6495 | int i; | |
6496 | for (i = 0; i < SATA_PMP_MAX_PORTS; i++) | |
6497 | ata_tlink_delete(&ap->pmp_link[i]); | |
6498 | } | |
720ba126 | 6499 | /* remove the associated SCSI host */ |
cca3974e | 6500 | scsi_remove_host(ap->scsi_host); |
c5700766 | 6501 | ata_tport_delete(ap); |
720ba126 TH |
6502 | } |
6503 | ||
0529c159 TH |
6504 | /** |
6505 | * ata_host_detach - Detach all ports of an ATA host | |
6506 | * @host: Host to detach | |
6507 | * | |
6508 | * Detach all ports of @host. | |
6509 | * | |
6510 | * LOCKING: | |
6511 | * Kernel thread context (may sleep). | |
6512 | */ | |
6513 | void ata_host_detach(struct ata_host *host) | |
6514 | { | |
6515 | int i; | |
6516 | ||
6517 | for (i = 0; i < host->n_ports; i++) | |
6518 | ata_port_detach(host->ports[i]); | |
562f0c2d TH |
6519 | |
6520 | /* the host is dead now, dissociate ACPI */ | |
6521 | ata_acpi_dissociate(host); | |
0529c159 TH |
6522 | } |
6523 | ||
374b1873 JG |
6524 | #ifdef CONFIG_PCI |
6525 | ||
1da177e4 LT |
6526 | /** |
6527 | * ata_pci_remove_one - PCI layer callback for device removal | |
6528 | * @pdev: PCI device that was removed | |
6529 | * | |
b878ca5d TH |
6530 | * PCI layer indicates to libata via this hook that hot-unplug or |
6531 | * module unload event has occurred. Detach all ports. Resource | |
6532 | * release is handled via devres. | |
1da177e4 LT |
6533 | * |
6534 | * LOCKING: | |
6535 | * Inherited from PCI layer (may sleep). | |
6536 | */ | |
f0d36efd | 6537 | void ata_pci_remove_one(struct pci_dev *pdev) |
1da177e4 | 6538 | { |
04a3f5b7 | 6539 | struct ata_host *host = pci_get_drvdata(pdev); |
1da177e4 | 6540 | |
b878ca5d | 6541 | ata_host_detach(host); |
1da177e4 LT |
6542 | } |
6543 | ||
6544 | /* move to PCI subsystem */ | |
057ace5e | 6545 | int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) |
1da177e4 LT |
6546 | { |
6547 | unsigned long tmp = 0; | |
6548 | ||
6549 | switch (bits->width) { | |
6550 | case 1: { | |
6551 | u8 tmp8 = 0; | |
6552 | pci_read_config_byte(pdev, bits->reg, &tmp8); | |
6553 | tmp = tmp8; | |
6554 | break; | |
6555 | } | |
6556 | case 2: { | |
6557 | u16 tmp16 = 0; | |
6558 | pci_read_config_word(pdev, bits->reg, &tmp16); | |
6559 | tmp = tmp16; | |
6560 | break; | |
6561 | } | |
6562 | case 4: { | |
6563 | u32 tmp32 = 0; | |
6564 | pci_read_config_dword(pdev, bits->reg, &tmp32); | |
6565 | tmp = tmp32; | |
6566 | break; | |
6567 | } | |
6568 | ||
6569 | default: | |
6570 | return -EINVAL; | |
6571 | } | |
6572 | ||
6573 | tmp &= bits->mask; | |
6574 | ||
6575 | return (tmp == bits->val) ? 1 : 0; | |
6576 | } | |
9b847548 | 6577 | |
6ffa01d8 | 6578 | #ifdef CONFIG_PM |
3c5100c1 | 6579 | void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg) |
9b847548 JA |
6580 | { |
6581 | pci_save_state(pdev); | |
4c90d971 | 6582 | pci_disable_device(pdev); |
500530f6 | 6583 | |
3a2d5b70 | 6584 | if (mesg.event & PM_EVENT_SLEEP) |
500530f6 | 6585 | pci_set_power_state(pdev, PCI_D3hot); |
9b847548 JA |
6586 | } |
6587 | ||
553c4aa6 | 6588 | int ata_pci_device_do_resume(struct pci_dev *pdev) |
9b847548 | 6589 | { |
553c4aa6 TH |
6590 | int rc; |
6591 | ||
9b847548 JA |
6592 | pci_set_power_state(pdev, PCI_D0); |
6593 | pci_restore_state(pdev); | |
553c4aa6 | 6594 | |
b878ca5d | 6595 | rc = pcim_enable_device(pdev); |
553c4aa6 | 6596 | if (rc) { |
a44fec1f JP |
6597 | dev_err(&pdev->dev, |
6598 | "failed to enable device after resume (%d)\n", rc); | |
553c4aa6 TH |
6599 | return rc; |
6600 | } | |
6601 | ||
9b847548 | 6602 | pci_set_master(pdev); |
553c4aa6 | 6603 | return 0; |
500530f6 TH |
6604 | } |
6605 | ||
3c5100c1 | 6606 | int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) |
500530f6 | 6607 | { |
04a3f5b7 | 6608 | struct ata_host *host = pci_get_drvdata(pdev); |
500530f6 TH |
6609 | int rc = 0; |
6610 | ||
cca3974e | 6611 | rc = ata_host_suspend(host, mesg); |
500530f6 TH |
6612 | if (rc) |
6613 | return rc; | |
6614 | ||
3c5100c1 | 6615 | ata_pci_device_do_suspend(pdev, mesg); |
500530f6 TH |
6616 | |
6617 | return 0; | |
6618 | } | |
6619 | ||
6620 | int ata_pci_device_resume(struct pci_dev *pdev) | |
6621 | { | |
04a3f5b7 | 6622 | struct ata_host *host = pci_get_drvdata(pdev); |
553c4aa6 | 6623 | int rc; |
500530f6 | 6624 | |
553c4aa6 TH |
6625 | rc = ata_pci_device_do_resume(pdev); |
6626 | if (rc == 0) | |
6627 | ata_host_resume(host); | |
6628 | return rc; | |
9b847548 | 6629 | } |
6ffa01d8 TH |
6630 | #endif /* CONFIG_PM */ |
6631 | ||
1da177e4 LT |
6632 | #endif /* CONFIG_PCI */ |
6633 | ||
b7db04d9 BN |
6634 | /** |
6635 | * ata_platform_remove_one - Platform layer callback for device removal | |
6636 | * @pdev: Platform device that was removed | |
6637 | * | |
6638 | * Platform layer indicates to libata via this hook that hot-unplug or | |
6639 | * module unload event has occurred. Detach all ports. Resource | |
6640 | * release is handled via devres. | |
6641 | * | |
6642 | * LOCKING: | |
6643 | * Inherited from platform layer (may sleep). | |
6644 | */ | |
6645 | int ata_platform_remove_one(struct platform_device *pdev) | |
6646 | { | |
6647 | struct ata_host *host = platform_get_drvdata(pdev); | |
6648 | ||
6649 | ata_host_detach(host); | |
6650 | ||
6651 | return 0; | |
6652 | } | |
6653 | ||
33267325 TH |
6654 | static int __init ata_parse_force_one(char **cur, |
6655 | struct ata_force_ent *force_ent, | |
6656 | const char **reason) | |
6657 | { | |
0f5f264b | 6658 | static const struct ata_force_param force_tbl[] __initconst = { |
33267325 TH |
6659 | { "40c", .cbl = ATA_CBL_PATA40 }, |
6660 | { "80c", .cbl = ATA_CBL_PATA80 }, | |
6661 | { "short40c", .cbl = ATA_CBL_PATA40_SHORT }, | |
6662 | { "unk", .cbl = ATA_CBL_PATA_UNK }, | |
6663 | { "ign", .cbl = ATA_CBL_PATA_IGN }, | |
6664 | { "sata", .cbl = ATA_CBL_SATA }, | |
6665 | { "1.5Gbps", .spd_limit = 1 }, | |
6666 | { "3.0Gbps", .spd_limit = 2 }, | |
6667 | { "noncq", .horkage_on = ATA_HORKAGE_NONCQ }, | |
6668 | { "ncq", .horkage_off = ATA_HORKAGE_NONCQ }, | |
d7b16e4f MP |
6669 | { "noncqtrim", .horkage_on = ATA_HORKAGE_NO_NCQ_TRIM }, |
6670 | { "ncqtrim", .horkage_off = ATA_HORKAGE_NO_NCQ_TRIM }, | |
43c9c591 | 6671 | { "dump_id", .horkage_on = ATA_HORKAGE_DUMP_ID }, |
33267325 TH |
6672 | { "pio0", .xfer_mask = 1 << (ATA_SHIFT_PIO + 0) }, |
6673 | { "pio1", .xfer_mask = 1 << (ATA_SHIFT_PIO + 1) }, | |
6674 | { "pio2", .xfer_mask = 1 << (ATA_SHIFT_PIO + 2) }, | |
6675 | { "pio3", .xfer_mask = 1 << (ATA_SHIFT_PIO + 3) }, | |
6676 | { "pio4", .xfer_mask = 1 << (ATA_SHIFT_PIO + 4) }, | |
6677 | { "pio5", .xfer_mask = 1 << (ATA_SHIFT_PIO + 5) }, | |
6678 | { "pio6", .xfer_mask = 1 << (ATA_SHIFT_PIO + 6) }, | |
6679 | { "mwdma0", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 0) }, | |
6680 | { "mwdma1", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 1) }, | |
6681 | { "mwdma2", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 2) }, | |
6682 | { "mwdma3", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 3) }, | |
6683 | { "mwdma4", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 4) }, | |
6684 | { "udma0", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) }, | |
6685 | { "udma16", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) }, | |
6686 | { "udma/16", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) }, | |
6687 | { "udma1", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) }, | |
6688 | { "udma25", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) }, | |
6689 | { "udma/25", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) }, | |
6690 | { "udma2", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) }, | |
6691 | { "udma33", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) }, | |
6692 | { "udma/33", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) }, | |
6693 | { "udma3", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) }, | |
6694 | { "udma44", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) }, | |
6695 | { "udma/44", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) }, | |
6696 | { "udma4", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) }, | |
6697 | { "udma66", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) }, | |
6698 | { "udma/66", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) }, | |
6699 | { "udma5", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) }, | |
6700 | { "udma100", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) }, | |
6701 | { "udma/100", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) }, | |
6702 | { "udma6", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) }, | |
6703 | { "udma133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) }, | |
6704 | { "udma/133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) }, | |
6705 | { "udma7", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 7) }, | |
05944bdf TH |
6706 | { "nohrst", .lflags = ATA_LFLAG_NO_HRST }, |
6707 | { "nosrst", .lflags = ATA_LFLAG_NO_SRST }, | |
6708 | { "norst", .lflags = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST }, | |
ca6d43b0 | 6709 | { "rstonce", .lflags = ATA_LFLAG_RST_ONCE }, |
966fbe19 | 6710 | { "atapi_dmadir", .horkage_on = ATA_HORKAGE_ATAPI_DMADIR }, |
b8bd6dc3 | 6711 | { "disable", .horkage_on = ATA_HORKAGE_DISABLE }, |
33267325 TH |
6712 | }; |
6713 | char *start = *cur, *p = *cur; | |
6714 | char *id, *val, *endp; | |
6715 | const struct ata_force_param *match_fp = NULL; | |
6716 | int nr_matches = 0, i; | |
6717 | ||
6718 | /* find where this param ends and update *cur */ | |
6719 | while (*p != '\0' && *p != ',') | |
6720 | p++; | |
6721 | ||
6722 | if (*p == '\0') | |
6723 | *cur = p; | |
6724 | else | |
6725 | *cur = p + 1; | |
6726 | ||
6727 | *p = '\0'; | |
6728 | ||
6729 | /* parse */ | |
6730 | p = strchr(start, ':'); | |
6731 | if (!p) { | |
6732 | val = strstrip(start); | |
6733 | goto parse_val; | |
6734 | } | |
6735 | *p = '\0'; | |
6736 | ||
6737 | id = strstrip(start); | |
6738 | val = strstrip(p + 1); | |
6739 | ||
6740 | /* parse id */ | |
6741 | p = strchr(id, '.'); | |
6742 | if (p) { | |
6743 | *p++ = '\0'; | |
6744 | force_ent->device = simple_strtoul(p, &endp, 10); | |
6745 | if (p == endp || *endp != '\0') { | |
6746 | *reason = "invalid device"; | |
6747 | return -EINVAL; | |
6748 | } | |
6749 | } | |
6750 | ||
6751 | force_ent->port = simple_strtoul(id, &endp, 10); | |
6752 | if (p == endp || *endp != '\0') { | |
6753 | *reason = "invalid port/link"; | |
6754 | return -EINVAL; | |
6755 | } | |
6756 | ||
6757 | parse_val: | |
6758 | /* parse val, allow shortcuts so that both 1.5 and 1.5Gbps work */ | |
6759 | for (i = 0; i < ARRAY_SIZE(force_tbl); i++) { | |
6760 | const struct ata_force_param *fp = &force_tbl[i]; | |
6761 | ||
6762 | if (strncasecmp(val, fp->name, strlen(val))) | |
6763 | continue; | |
6764 | ||
6765 | nr_matches++; | |
6766 | match_fp = fp; | |
6767 | ||
6768 | if (strcasecmp(val, fp->name) == 0) { | |
6769 | nr_matches = 1; | |
6770 | break; | |
6771 | } | |
6772 | } | |
6773 | ||
6774 | if (!nr_matches) { | |
6775 | *reason = "unknown value"; | |
6776 | return -EINVAL; | |
6777 | } | |
6778 | if (nr_matches > 1) { | |
6779 | *reason = "ambigious value"; | |
6780 | return -EINVAL; | |
6781 | } | |
6782 | ||
6783 | force_ent->param = *match_fp; | |
6784 | ||
6785 | return 0; | |
6786 | } | |
6787 | ||
6788 | static void __init ata_parse_force_param(void) | |
6789 | { | |
6790 | int idx = 0, size = 1; | |
6791 | int last_port = -1, last_device = -1; | |
6792 | char *p, *cur, *next; | |
6793 | ||
6794 | /* calculate maximum number of params and allocate force_tbl */ | |
6795 | for (p = ata_force_param_buf; *p; p++) | |
6796 | if (*p == ',') | |
6797 | size++; | |
6798 | ||
6799 | ata_force_tbl = kzalloc(sizeof(ata_force_tbl[0]) * size, GFP_KERNEL); | |
6800 | if (!ata_force_tbl) { | |
6801 | printk(KERN_WARNING "ata: failed to extend force table, " | |
6802 | "libata.force ignored\n"); | |
6803 | return; | |
6804 | } | |
6805 | ||
6806 | /* parse and populate the table */ | |
6807 | for (cur = ata_force_param_buf; *cur != '\0'; cur = next) { | |
6808 | const char *reason = ""; | |
6809 | struct ata_force_ent te = { .port = -1, .device = -1 }; | |
6810 | ||
6811 | next = cur; | |
6812 | if (ata_parse_force_one(&next, &te, &reason)) { | |
6813 | printk(KERN_WARNING "ata: failed to parse force " | |
6814 | "parameter \"%s\" (%s)\n", | |
6815 | cur, reason); | |
6816 | continue; | |
6817 | } | |
6818 | ||
6819 | if (te.port == -1) { | |
6820 | te.port = last_port; | |
6821 | te.device = last_device; | |
6822 | } | |
6823 | ||
6824 | ata_force_tbl[idx++] = te; | |
6825 | ||
6826 | last_port = te.port; | |
6827 | last_device = te.device; | |
6828 | } | |
6829 | ||
6830 | ata_force_tbl_size = idx; | |
6831 | } | |
1da177e4 | 6832 | |
1da177e4 LT |
6833 | static int __init ata_init(void) |
6834 | { | |
d9027470 | 6835 | int rc; |
270390e1 | 6836 | |
33267325 TH |
6837 | ata_parse_force_param(); |
6838 | ||
270390e1 | 6839 | rc = ata_sff_init(); |
ad72cf98 TH |
6840 | if (rc) { |
6841 | kfree(ata_force_tbl); | |
6842 | return rc; | |
6843 | } | |
453b07ac | 6844 | |
d9027470 GG |
6845 | libata_transport_init(); |
6846 | ata_scsi_transport_template = ata_attach_transport(); | |
6847 | if (!ata_scsi_transport_template) { | |
6848 | ata_sff_exit(); | |
6849 | rc = -ENOMEM; | |
6850 | goto err_out; | |
4fca377f | 6851 | } |
d9027470 | 6852 | |
1da177e4 LT |
6853 | printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n"); |
6854 | return 0; | |
d9027470 GG |
6855 | |
6856 | err_out: | |
6857 | return rc; | |
1da177e4 LT |
6858 | } |
6859 | ||
6860 | static void __exit ata_exit(void) | |
6861 | { | |
d9027470 GG |
6862 | ata_release_transport(ata_scsi_transport_template); |
6863 | libata_transport_exit(); | |
270390e1 | 6864 | ata_sff_exit(); |
33267325 | 6865 | kfree(ata_force_tbl); |
1da177e4 LT |
6866 | } |
6867 | ||
a4625085 | 6868 | subsys_initcall(ata_init); |
1da177e4 LT |
6869 | module_exit(ata_exit); |
6870 | ||
9990b6f3 | 6871 | static DEFINE_RATELIMIT_STATE(ratelimit, HZ / 5, 1); |
67846b30 JG |
6872 | |
6873 | int ata_ratelimit(void) | |
6874 | { | |
9990b6f3 | 6875 | return __ratelimit(&ratelimit); |
67846b30 JG |
6876 | } |
6877 | ||
c0c362b6 TH |
6878 | /** |
6879 | * ata_msleep - ATA EH owner aware msleep | |
6880 | * @ap: ATA port to attribute the sleep to | |
6881 | * @msecs: duration to sleep in milliseconds | |
6882 | * | |
6883 | * Sleeps @msecs. If the current task is owner of @ap's EH, the | |
6884 | * ownership is released before going to sleep and reacquired | |
6885 | * after the sleep is complete. IOW, other ports sharing the | |
6886 | * @ap->host will be allowed to own the EH while this task is | |
6887 | * sleeping. | |
6888 | * | |
6889 | * LOCKING: | |
6890 | * Might sleep. | |
6891 | */ | |
97750ceb TH |
6892 | void ata_msleep(struct ata_port *ap, unsigned int msecs) |
6893 | { | |
c0c362b6 TH |
6894 | bool owns_eh = ap && ap->host->eh_owner == current; |
6895 | ||
6896 | if (owns_eh) | |
6897 | ata_eh_release(ap); | |
6898 | ||
848c3920 AVM |
6899 | if (msecs < 20) { |
6900 | unsigned long usecs = msecs * USEC_PER_MSEC; | |
6901 | usleep_range(usecs, usecs + 50); | |
6902 | } else { | |
6903 | msleep(msecs); | |
6904 | } | |
c0c362b6 TH |
6905 | |
6906 | if (owns_eh) | |
6907 | ata_eh_acquire(ap); | |
97750ceb TH |
6908 | } |
6909 | ||
c22daff4 TH |
6910 | /** |
6911 | * ata_wait_register - wait until register value changes | |
97750ceb | 6912 | * @ap: ATA port to wait register for, can be NULL |
c22daff4 TH |
6913 | * @reg: IO-mapped register |
6914 | * @mask: Mask to apply to read register value | |
6915 | * @val: Wait condition | |
341c2c95 TH |
6916 | * @interval: polling interval in milliseconds |
6917 | * @timeout: timeout in milliseconds | |
c22daff4 TH |
6918 | * |
6919 | * Waiting for some bits of register to change is a common | |
6920 | * operation for ATA controllers. This function reads 32bit LE | |
6921 | * IO-mapped register @reg and tests for the following condition. | |
6922 | * | |
6923 | * (*@reg & mask) != val | |
6924 | * | |
6925 | * If the condition is met, it returns; otherwise, the process is | |
6926 | * repeated after @interval_msec until timeout. | |
6927 | * | |
6928 | * LOCKING: | |
6929 | * Kernel thread context (may sleep) | |
6930 | * | |
6931 | * RETURNS: | |
6932 | * The final register value. | |
6933 | */ | |
97750ceb | 6934 | u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask, u32 val, |
341c2c95 | 6935 | unsigned long interval, unsigned long timeout) |
c22daff4 | 6936 | { |
341c2c95 | 6937 | unsigned long deadline; |
c22daff4 TH |
6938 | u32 tmp; |
6939 | ||
6940 | tmp = ioread32(reg); | |
6941 | ||
6942 | /* Calculate timeout _after_ the first read to make sure | |
6943 | * preceding writes reach the controller before starting to | |
6944 | * eat away the timeout. | |
6945 | */ | |
341c2c95 | 6946 | deadline = ata_deadline(jiffies, timeout); |
c22daff4 | 6947 | |
341c2c95 | 6948 | while ((tmp & mask) == val && time_before(jiffies, deadline)) { |
97750ceb | 6949 | ata_msleep(ap, interval); |
c22daff4 TH |
6950 | tmp = ioread32(reg); |
6951 | } | |
6952 | ||
6953 | return tmp; | |
6954 | } | |
6955 | ||
8393b811 GM |
6956 | /** |
6957 | * sata_lpm_ignore_phy_events - test if PHY event should be ignored | |
6958 | * @link: Link receiving the event | |
6959 | * | |
6960 | * Test whether the received PHY event has to be ignored or not. | |
6961 | * | |
6962 | * LOCKING: | |
6963 | * None: | |
6964 | * | |
6965 | * RETURNS: | |
6966 | * True if the event has to be ignored. | |
6967 | */ | |
6968 | bool sata_lpm_ignore_phy_events(struct ata_link *link) | |
6969 | { | |
09c5b480 GM |
6970 | unsigned long lpm_timeout = link->last_lpm_change + |
6971 | msecs_to_jiffies(ATA_TMOUT_SPURIOUS_PHY); | |
6972 | ||
8393b811 | 6973 | /* if LPM is enabled, PHYRDY doesn't mean anything */ |
09c5b480 GM |
6974 | if (link->lpm_policy > ATA_LPM_MAX_POWER) |
6975 | return true; | |
6976 | ||
6977 | /* ignore the first PHY event after the LPM policy changed | |
6978 | * as it is might be spurious | |
6979 | */ | |
6980 | if ((link->flags & ATA_LFLAG_CHANGED) && | |
6981 | time_before(jiffies, lpm_timeout)) | |
6982 | return true; | |
6983 | ||
6984 | return false; | |
8393b811 GM |
6985 | } |
6986 | EXPORT_SYMBOL_GPL(sata_lpm_ignore_phy_events); | |
6987 | ||
dd5b06c4 TH |
6988 | /* |
6989 | * Dummy port_ops | |
6990 | */ | |
182d7bba | 6991 | static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc) |
dd5b06c4 | 6992 | { |
182d7bba | 6993 | return AC_ERR_SYSTEM; |
dd5b06c4 TH |
6994 | } |
6995 | ||
182d7bba | 6996 | static void ata_dummy_error_handler(struct ata_port *ap) |
dd5b06c4 | 6997 | { |
182d7bba | 6998 | /* truly dummy */ |
dd5b06c4 TH |
6999 | } |
7000 | ||
029cfd6b | 7001 | struct ata_port_operations ata_dummy_port_ops = { |
dd5b06c4 TH |
7002 | .qc_prep = ata_noop_qc_prep, |
7003 | .qc_issue = ata_dummy_qc_issue, | |
182d7bba | 7004 | .error_handler = ata_dummy_error_handler, |
e4a9c373 DW |
7005 | .sched_eh = ata_std_sched_eh, |
7006 | .end_eh = ata_std_end_eh, | |
dd5b06c4 TH |
7007 | }; |
7008 | ||
21b0ad4f TH |
7009 | const struct ata_port_info ata_dummy_port_info = { |
7010 | .port_ops = &ata_dummy_port_ops, | |
7011 | }; | |
7012 | ||
a9a79dfe JP |
7013 | /* |
7014 | * Utility print functions | |
7015 | */ | |
d7bead1b JP |
7016 | void ata_port_printk(const struct ata_port *ap, const char *level, |
7017 | const char *fmt, ...) | |
a9a79dfe JP |
7018 | { |
7019 | struct va_format vaf; | |
7020 | va_list args; | |
a9a79dfe JP |
7021 | |
7022 | va_start(args, fmt); | |
7023 | ||
7024 | vaf.fmt = fmt; | |
7025 | vaf.va = &args; | |
7026 | ||
d7bead1b | 7027 | printk("%sata%u: %pV", level, ap->print_id, &vaf); |
a9a79dfe JP |
7028 | |
7029 | va_end(args); | |
a9a79dfe JP |
7030 | } |
7031 | EXPORT_SYMBOL(ata_port_printk); | |
7032 | ||
d7bead1b JP |
7033 | void ata_link_printk(const struct ata_link *link, const char *level, |
7034 | const char *fmt, ...) | |
a9a79dfe JP |
7035 | { |
7036 | struct va_format vaf; | |
7037 | va_list args; | |
a9a79dfe JP |
7038 | |
7039 | va_start(args, fmt); | |
7040 | ||
7041 | vaf.fmt = fmt; | |
7042 | vaf.va = &args; | |
7043 | ||
7044 | if (sata_pmp_attached(link->ap) || link->ap->slave_link) | |
d7bead1b JP |
7045 | printk("%sata%u.%02u: %pV", |
7046 | level, link->ap->print_id, link->pmp, &vaf); | |
a9a79dfe | 7047 | else |
d7bead1b JP |
7048 | printk("%sata%u: %pV", |
7049 | level, link->ap->print_id, &vaf); | |
a9a79dfe JP |
7050 | |
7051 | va_end(args); | |
a9a79dfe JP |
7052 | } |
7053 | EXPORT_SYMBOL(ata_link_printk); | |
7054 | ||
d7bead1b | 7055 | void ata_dev_printk(const struct ata_device *dev, const char *level, |
a9a79dfe JP |
7056 | const char *fmt, ...) |
7057 | { | |
7058 | struct va_format vaf; | |
7059 | va_list args; | |
a9a79dfe JP |
7060 | |
7061 | va_start(args, fmt); | |
7062 | ||
7063 | vaf.fmt = fmt; | |
7064 | vaf.va = &args; | |
7065 | ||
d7bead1b JP |
7066 | printk("%sata%u.%02u: %pV", |
7067 | level, dev->link->ap->print_id, dev->link->pmp + dev->devno, | |
7068 | &vaf); | |
a9a79dfe JP |
7069 | |
7070 | va_end(args); | |
a9a79dfe JP |
7071 | } |
7072 | EXPORT_SYMBOL(ata_dev_printk); | |
7073 | ||
06296a1e JP |
7074 | void ata_print_version(const struct device *dev, const char *version) |
7075 | { | |
7076 | dev_printk(KERN_DEBUG, dev, "version %s\n", version); | |
7077 | } | |
7078 | EXPORT_SYMBOL(ata_print_version); | |
7079 | ||
1da177e4 LT |
7080 | /* |
7081 | * libata is essentially a library of internal helper functions for | |
7082 | * low-level ATA host controller drivers. As such, the API/ABI is | |
7083 | * likely to change as new drivers are added and updated. | |
7084 | * Do not depend on ABI/API stability. | |
7085 | */ | |
e9c83914 TH |
7086 | EXPORT_SYMBOL_GPL(sata_deb_timing_normal); |
7087 | EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug); | |
7088 | EXPORT_SYMBOL_GPL(sata_deb_timing_long); | |
029cfd6b TH |
7089 | EXPORT_SYMBOL_GPL(ata_base_port_ops); |
7090 | EXPORT_SYMBOL_GPL(sata_port_ops); | |
dd5b06c4 | 7091 | EXPORT_SYMBOL_GPL(ata_dummy_port_ops); |
21b0ad4f | 7092 | EXPORT_SYMBOL_GPL(ata_dummy_port_info); |
1eca4365 TH |
7093 | EXPORT_SYMBOL_GPL(ata_link_next); |
7094 | EXPORT_SYMBOL_GPL(ata_dev_next); | |
1da177e4 | 7095 | EXPORT_SYMBOL_GPL(ata_std_bios_param); |
d8d9129e | 7096 | EXPORT_SYMBOL_GPL(ata_scsi_unlock_native_capacity); |
cca3974e | 7097 | EXPORT_SYMBOL_GPL(ata_host_init); |
f3187195 | 7098 | EXPORT_SYMBOL_GPL(ata_host_alloc); |
f5cda257 | 7099 | EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo); |
b1c72916 | 7100 | EXPORT_SYMBOL_GPL(ata_slave_link_init); |
ecef7253 | 7101 | EXPORT_SYMBOL_GPL(ata_host_start); |
f3187195 | 7102 | EXPORT_SYMBOL_GPL(ata_host_register); |
f5cda257 | 7103 | EXPORT_SYMBOL_GPL(ata_host_activate); |
0529c159 | 7104 | EXPORT_SYMBOL_GPL(ata_host_detach); |
1da177e4 | 7105 | EXPORT_SYMBOL_GPL(ata_sg_init); |
f686bcb8 | 7106 | EXPORT_SYMBOL_GPL(ata_qc_complete); |
dedaf2b0 | 7107 | EXPORT_SYMBOL_GPL(ata_qc_complete_multiple); |
436d34b3 | 7108 | EXPORT_SYMBOL_GPL(atapi_cmd_type); |
1da177e4 LT |
7109 | EXPORT_SYMBOL_GPL(ata_tf_to_fis); |
7110 | EXPORT_SYMBOL_GPL(ata_tf_from_fis); | |
6357357c TH |
7111 | EXPORT_SYMBOL_GPL(ata_pack_xfermask); |
7112 | EXPORT_SYMBOL_GPL(ata_unpack_xfermask); | |
7113 | EXPORT_SYMBOL_GPL(ata_xfer_mask2mode); | |
7114 | EXPORT_SYMBOL_GPL(ata_xfer_mode2mask); | |
7115 | EXPORT_SYMBOL_GPL(ata_xfer_mode2shift); | |
7116 | EXPORT_SYMBOL_GPL(ata_mode_string); | |
7117 | EXPORT_SYMBOL_GPL(ata_id_xfermask); | |
04351821 | 7118 | EXPORT_SYMBOL_GPL(ata_do_set_mode); |
31cc23b3 | 7119 | EXPORT_SYMBOL_GPL(ata_std_qc_defer); |
e46834cd | 7120 | EXPORT_SYMBOL_GPL(ata_noop_qc_prep); |
10305f0f | 7121 | EXPORT_SYMBOL_GPL(ata_dev_disable); |
3c567b7d | 7122 | EXPORT_SYMBOL_GPL(sata_set_spd); |
aa2731ad | 7123 | EXPORT_SYMBOL_GPL(ata_wait_after_reset); |
936fd732 TH |
7124 | EXPORT_SYMBOL_GPL(sata_link_debounce); |
7125 | EXPORT_SYMBOL_GPL(sata_link_resume); | |
1152b261 | 7126 | EXPORT_SYMBOL_GPL(sata_link_scr_lpm); |
0aa1113d | 7127 | EXPORT_SYMBOL_GPL(ata_std_prereset); |
cc0680a5 | 7128 | EXPORT_SYMBOL_GPL(sata_link_hardreset); |
57c9efdf | 7129 | EXPORT_SYMBOL_GPL(sata_std_hardreset); |
203c75b8 | 7130 | EXPORT_SYMBOL_GPL(ata_std_postreset); |
2e9edbf8 JG |
7131 | EXPORT_SYMBOL_GPL(ata_dev_classify); |
7132 | EXPORT_SYMBOL_GPL(ata_dev_pair); | |
67846b30 | 7133 | EXPORT_SYMBOL_GPL(ata_ratelimit); |
97750ceb | 7134 | EXPORT_SYMBOL_GPL(ata_msleep); |
c22daff4 | 7135 | EXPORT_SYMBOL_GPL(ata_wait_register); |
1da177e4 | 7136 | EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); |
1da177e4 | 7137 | EXPORT_SYMBOL_GPL(ata_scsi_slave_config); |
83c47bcb | 7138 | EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy); |
a6e6ce8e | 7139 | EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth); |
f6e67035 | 7140 | EXPORT_SYMBOL_GPL(__ata_change_queue_depth); |
34bf2170 TH |
7141 | EXPORT_SYMBOL_GPL(sata_scr_valid); |
7142 | EXPORT_SYMBOL_GPL(sata_scr_read); | |
7143 | EXPORT_SYMBOL_GPL(sata_scr_write); | |
7144 | EXPORT_SYMBOL_GPL(sata_scr_write_flush); | |
936fd732 TH |
7145 | EXPORT_SYMBOL_GPL(ata_link_online); |
7146 | EXPORT_SYMBOL_GPL(ata_link_offline); | |
6ffa01d8 | 7147 | #ifdef CONFIG_PM |
cca3974e JG |
7148 | EXPORT_SYMBOL_GPL(ata_host_suspend); |
7149 | EXPORT_SYMBOL_GPL(ata_host_resume); | |
6ffa01d8 | 7150 | #endif /* CONFIG_PM */ |
6a62a04d TH |
7151 | EXPORT_SYMBOL_GPL(ata_id_string); |
7152 | EXPORT_SYMBOL_GPL(ata_id_c_string); | |
963e4975 | 7153 | EXPORT_SYMBOL_GPL(ata_do_dev_read_id); |
1da177e4 LT |
7154 | EXPORT_SYMBOL_GPL(ata_scsi_simulate); |
7155 | ||
1bc4ccff | 7156 | EXPORT_SYMBOL_GPL(ata_pio_need_iordy); |
6357357c | 7157 | EXPORT_SYMBOL_GPL(ata_timing_find_mode); |
452503f9 AC |
7158 | EXPORT_SYMBOL_GPL(ata_timing_compute); |
7159 | EXPORT_SYMBOL_GPL(ata_timing_merge); | |
a0f79b92 | 7160 | EXPORT_SYMBOL_GPL(ata_timing_cycle2mode); |
452503f9 | 7161 | |
1da177e4 LT |
7162 | #ifdef CONFIG_PCI |
7163 | EXPORT_SYMBOL_GPL(pci_test_config_bits); | |
1da177e4 | 7164 | EXPORT_SYMBOL_GPL(ata_pci_remove_one); |
6ffa01d8 | 7165 | #ifdef CONFIG_PM |
500530f6 TH |
7166 | EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend); |
7167 | EXPORT_SYMBOL_GPL(ata_pci_device_do_resume); | |
9b847548 JA |
7168 | EXPORT_SYMBOL_GPL(ata_pci_device_suspend); |
7169 | EXPORT_SYMBOL_GPL(ata_pci_device_resume); | |
6ffa01d8 | 7170 | #endif /* CONFIG_PM */ |
1da177e4 | 7171 | #endif /* CONFIG_PCI */ |
9b847548 | 7172 | |
b7db04d9 BN |
7173 | EXPORT_SYMBOL_GPL(ata_platform_remove_one); |
7174 | ||
b64bbc39 TH |
7175 | EXPORT_SYMBOL_GPL(__ata_ehi_push_desc); |
7176 | EXPORT_SYMBOL_GPL(ata_ehi_push_desc); | |
7177 | EXPORT_SYMBOL_GPL(ata_ehi_clear_desc); | |
cbcdd875 TH |
7178 | EXPORT_SYMBOL_GPL(ata_port_desc); |
7179 | #ifdef CONFIG_PCI | |
7180 | EXPORT_SYMBOL_GPL(ata_port_pbar_desc); | |
7181 | #endif /* CONFIG_PCI */ | |
7b70fc03 | 7182 | EXPORT_SYMBOL_GPL(ata_port_schedule_eh); |
dbd82616 | 7183 | EXPORT_SYMBOL_GPL(ata_link_abort); |
7b70fc03 | 7184 | EXPORT_SYMBOL_GPL(ata_port_abort); |
e3180499 | 7185 | EXPORT_SYMBOL_GPL(ata_port_freeze); |
7d77b247 | 7186 | EXPORT_SYMBOL_GPL(sata_async_notification); |
e3180499 TH |
7187 | EXPORT_SYMBOL_GPL(ata_eh_freeze_port); |
7188 | EXPORT_SYMBOL_GPL(ata_eh_thaw_port); | |
ece1d636 TH |
7189 | EXPORT_SYMBOL_GPL(ata_eh_qc_complete); |
7190 | EXPORT_SYMBOL_GPL(ata_eh_qc_retry); | |
10acf3b0 | 7191 | EXPORT_SYMBOL_GPL(ata_eh_analyze_ncq_error); |
022bdb07 | 7192 | EXPORT_SYMBOL_GPL(ata_do_eh); |
a1efdaba | 7193 | EXPORT_SYMBOL_GPL(ata_std_error_handler); |
be0d18df AC |
7194 | |
7195 | EXPORT_SYMBOL_GPL(ata_cable_40wire); | |
7196 | EXPORT_SYMBOL_GPL(ata_cable_80wire); | |
7197 | EXPORT_SYMBOL_GPL(ata_cable_unknown); | |
c88f90c3 | 7198 | EXPORT_SYMBOL_GPL(ata_cable_ignore); |
be0d18df | 7199 | EXPORT_SYMBOL_GPL(ata_cable_sata); |