Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
af36d7f0 JG |
2 | * libata-core.c - helper library for ATA |
3 | * | |
4 | * Maintained by: Jeff Garzik <jgarzik@pobox.com> | |
5 | * Please ALWAYS copy linux-ide@vger.kernel.org | |
6 | * on emails. | |
7 | * | |
8 | * Copyright 2003-2004 Red Hat, Inc. All rights reserved. | |
9 | * Copyright 2003-2004 Jeff Garzik | |
10 | * | |
11 | * | |
12 | * This program is free software; you can redistribute it and/or modify | |
13 | * it under the terms of the GNU General Public License as published by | |
14 | * the Free Software Foundation; either version 2, or (at your option) | |
15 | * any later version. | |
16 | * | |
17 | * This program is distributed in the hope that it will be useful, | |
18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
20 | * GNU General Public License for more details. | |
21 | * | |
22 | * You should have received a copy of the GNU General Public License | |
23 | * along with this program; see the file COPYING. If not, write to | |
24 | * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | |
25 | * | |
26 | * | |
27 | * libata documentation is available via 'make {ps|pdf}docs', | |
28 | * as Documentation/DocBook/libata.* | |
29 | * | |
30 | * Hardware documentation available from http://www.t13.org/ and | |
31 | * http://www.sata-io.org/ | |
32 | * | |
92c52c52 AC |
33 | * Standards documents from: |
34 | * http://www.t13.org (ATA standards, PCI DMA IDE spec) | |
35 | * http://www.t10.org (SCSI MMC - for ATAPI MMC) | |
36 | * http://www.sata-io.org (SATA) | |
37 | * http://www.compactflash.org (CF) | |
38 | * http://www.qic.org (QIC157 - Tape and DSC) | |
39 | * http://www.ce-ata.org (CE-ATA: not supported) | |
40 | * | |
1da177e4 LT |
41 | */ |
42 | ||
1da177e4 LT |
43 | #include <linux/kernel.h> |
44 | #include <linux/module.h> | |
45 | #include <linux/pci.h> | |
46 | #include <linux/init.h> | |
47 | #include <linux/list.h> | |
48 | #include <linux/mm.h> | |
1da177e4 LT |
49 | #include <linux/spinlock.h> |
50 | #include <linux/blkdev.h> | |
51 | #include <linux/delay.h> | |
52 | #include <linux/timer.h> | |
53 | #include <linux/interrupt.h> | |
54 | #include <linux/completion.h> | |
55 | #include <linux/suspend.h> | |
56 | #include <linux/workqueue.h> | |
378f058c | 57 | #include <linux/scatterlist.h> |
2dcb407e | 58 | #include <linux/io.h> |
1da177e4 | 59 | #include <scsi/scsi.h> |
193515d5 | 60 | #include <scsi/scsi_cmnd.h> |
1da177e4 LT |
61 | #include <scsi/scsi_host.h> |
62 | #include <linux/libata.h> | |
1da177e4 | 63 | #include <asm/byteorder.h> |
140b5e59 | 64 | #include <linux/cdrom.h> |
1da177e4 LT |
65 | |
66 | #include "libata.h" | |
67 | ||
fda0efc5 | 68 | |
d7bb4cc7 | 69 | /* debounce timing parameters in msecs { interval, duration, timeout } */ |
e9c83914 TH |
70 | const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 }; |
71 | const unsigned long sata_deb_timing_hotplug[] = { 25, 500, 2000 }; | |
72 | const unsigned long sata_deb_timing_long[] = { 100, 2000, 5000 }; | |
d7bb4cc7 | 73 | |
029cfd6b | 74 | const struct ata_port_operations ata_base_port_ops = { |
0aa1113d | 75 | .prereset = ata_std_prereset, |
203c75b8 | 76 | .postreset = ata_std_postreset, |
a1efdaba | 77 | .error_handler = ata_std_error_handler, |
029cfd6b TH |
78 | }; |
79 | ||
80 | const struct ata_port_operations sata_port_ops = { | |
81 | .inherits = &ata_base_port_ops, | |
82 | ||
83 | .qc_defer = ata_std_qc_defer, | |
57c9efdf | 84 | .hardreset = sata_std_hardreset, |
029cfd6b TH |
85 | }; |
86 | ||
3373efd8 TH |
87 | static unsigned int ata_dev_init_params(struct ata_device *dev, |
88 | u16 heads, u16 sectors); | |
89 | static unsigned int ata_dev_set_xfermode(struct ata_device *dev); | |
218f3d30 JG |
90 | static unsigned int ata_dev_set_feature(struct ata_device *dev, |
91 | u8 enable, u8 feature); | |
3373efd8 | 92 | static void ata_dev_xfermask(struct ata_device *dev); |
75683fe7 | 93 | static unsigned long ata_dev_blacklisted(const struct ata_device *dev); |
1da177e4 | 94 | |
f3187195 | 95 | unsigned int ata_print_id = 1; |
1da177e4 LT |
96 | static struct workqueue_struct *ata_wq; |
97 | ||
453b07ac TH |
98 | struct workqueue_struct *ata_aux_wq; |
99 | ||
33267325 TH |
100 | struct ata_force_param { |
101 | const char *name; | |
102 | unsigned int cbl; | |
103 | int spd_limit; | |
104 | unsigned long xfer_mask; | |
105 | unsigned int horkage_on; | |
106 | unsigned int horkage_off; | |
107 | }; | |
108 | ||
109 | struct ata_force_ent { | |
110 | int port; | |
111 | int device; | |
112 | struct ata_force_param param; | |
113 | }; | |
114 | ||
115 | static struct ata_force_ent *ata_force_tbl; | |
116 | static int ata_force_tbl_size; | |
117 | ||
118 | static char ata_force_param_buf[PAGE_SIZE] __initdata; | |
7afb4222 TH |
119 | /* param_buf is thrown away after initialization, disallow read */ |
120 | module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0); | |
33267325 TH |
121 | MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/kernel-parameters.txt for details)"); |
122 | ||
418dc1f5 | 123 | int atapi_enabled = 1; |
1623c81e JG |
124 | module_param(atapi_enabled, int, 0444); |
125 | MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)"); | |
126 | ||
c5c61bda | 127 | static int atapi_dmadir = 0; |
95de719a AL |
128 | module_param(atapi_dmadir, int, 0444); |
129 | MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)"); | |
130 | ||
baf4fdfa ML |
131 | int atapi_passthru16 = 1; |
132 | module_param(atapi_passthru16, int, 0444); | |
133 | MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices; on by default (0=off, 1=on)"); | |
134 | ||
c3c013a2 JG |
135 | int libata_fua = 0; |
136 | module_param_named(fua, libata_fua, int, 0444); | |
137 | MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)"); | |
138 | ||
2dcb407e | 139 | static int ata_ignore_hpa; |
1e999736 AC |
140 | module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644); |
141 | MODULE_PARM_DESC(ignore_hpa, "Ignore HPA limit (0=keep BIOS limits, 1=ignore limits, using full disk)"); | |
142 | ||
b3a70601 AC |
143 | static int libata_dma_mask = ATA_DMA_MASK_ATA|ATA_DMA_MASK_ATAPI|ATA_DMA_MASK_CFA; |
144 | module_param_named(dma, libata_dma_mask, int, 0444); | |
145 | MODULE_PARM_DESC(dma, "DMA enable/disable (0x1==ATA, 0x2==ATAPI, 0x4==CF)"); | |
146 | ||
87fbc5a0 | 147 | static int ata_probe_timeout; |
a8601e5f AM |
148 | module_param(ata_probe_timeout, int, 0444); |
149 | MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)"); | |
150 | ||
6ebe9d86 | 151 | int libata_noacpi = 0; |
d7d0dad6 | 152 | module_param_named(noacpi, libata_noacpi, int, 0444); |
6ebe9d86 | 153 | MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in probe/suspend/resume when set"); |
11ef697b | 154 | |
ae8d4ee7 AC |
155 | int libata_allow_tpm = 0; |
156 | module_param_named(allow_tpm, libata_allow_tpm, int, 0444); | |
157 | MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands"); | |
158 | ||
1da177e4 LT |
159 | MODULE_AUTHOR("Jeff Garzik"); |
160 | MODULE_DESCRIPTION("Library module for ATA devices"); | |
161 | MODULE_LICENSE("GPL"); | |
162 | MODULE_VERSION(DRV_VERSION); | |
163 | ||
0baab86b | 164 | |
33267325 TH |
165 | /** |
166 | * ata_force_cbl - force cable type according to libata.force | |
4cdfa1b3 | 167 | * @ap: ATA port of interest |
33267325 TH |
168 | * |
169 | * Force cable type according to libata.force and whine about it. | |
170 | * The last entry which has matching port number is used, so it | |
171 | * can be specified as part of device force parameters. For | |
172 | * example, both "a:40c,1.00:udma4" and "1.00:40c,udma4" have the | |
173 | * same effect. | |
174 | * | |
175 | * LOCKING: | |
176 | * EH context. | |
177 | */ | |
178 | void ata_force_cbl(struct ata_port *ap) | |
179 | { | |
180 | int i; | |
181 | ||
182 | for (i = ata_force_tbl_size - 1; i >= 0; i--) { | |
183 | const struct ata_force_ent *fe = &ata_force_tbl[i]; | |
184 | ||
185 | if (fe->port != -1 && fe->port != ap->print_id) | |
186 | continue; | |
187 | ||
188 | if (fe->param.cbl == ATA_CBL_NONE) | |
189 | continue; | |
190 | ||
191 | ap->cbl = fe->param.cbl; | |
192 | ata_port_printk(ap, KERN_NOTICE, | |
193 | "FORCE: cable set to %s\n", fe->param.name); | |
194 | return; | |
195 | } | |
196 | } | |
197 | ||
198 | /** | |
199 | * ata_force_spd_limit - force SATA spd limit according to libata.force | |
200 | * @link: ATA link of interest | |
201 | * | |
202 | * Force SATA spd limit according to libata.force and whine about | |
203 | * it. When only the port part is specified (e.g. 1:), the limit | |
204 | * applies to all links connected to both the host link and all | |
205 | * fan-out ports connected via PMP. If the device part is | |
206 | * specified as 0 (e.g. 1.00:), it specifies the first fan-out | |
207 | * link not the host link. Device number 15 always points to the | |
208 | * host link whether PMP is attached or not. | |
209 | * | |
210 | * LOCKING: | |
211 | * EH context. | |
212 | */ | |
213 | static void ata_force_spd_limit(struct ata_link *link) | |
214 | { | |
215 | int linkno, i; | |
216 | ||
217 | if (ata_is_host_link(link)) | |
218 | linkno = 15; | |
219 | else | |
220 | linkno = link->pmp; | |
221 | ||
222 | for (i = ata_force_tbl_size - 1; i >= 0; i--) { | |
223 | const struct ata_force_ent *fe = &ata_force_tbl[i]; | |
224 | ||
225 | if (fe->port != -1 && fe->port != link->ap->print_id) | |
226 | continue; | |
227 | ||
228 | if (fe->device != -1 && fe->device != linkno) | |
229 | continue; | |
230 | ||
231 | if (!fe->param.spd_limit) | |
232 | continue; | |
233 | ||
234 | link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1; | |
235 | ata_link_printk(link, KERN_NOTICE, | |
236 | "FORCE: PHY spd limit set to %s\n", fe->param.name); | |
237 | return; | |
238 | } | |
239 | } | |
240 | ||
241 | /** | |
242 | * ata_force_xfermask - force xfermask according to libata.force | |
243 | * @dev: ATA device of interest | |
244 | * | |
245 | * Force xfer_mask according to libata.force and whine about it. | |
246 | * For consistency with link selection, device number 15 selects | |
247 | * the first device connected to the host link. | |
248 | * | |
249 | * LOCKING: | |
250 | * EH context. | |
251 | */ | |
252 | static void ata_force_xfermask(struct ata_device *dev) | |
253 | { | |
254 | int devno = dev->link->pmp + dev->devno; | |
255 | int alt_devno = devno; | |
256 | int i; | |
257 | ||
258 | /* allow n.15 for the first device attached to host port */ | |
259 | if (ata_is_host_link(dev->link) && devno == 0) | |
260 | alt_devno = 15; | |
261 | ||
262 | for (i = ata_force_tbl_size - 1; i >= 0; i--) { | |
263 | const struct ata_force_ent *fe = &ata_force_tbl[i]; | |
264 | unsigned long pio_mask, mwdma_mask, udma_mask; | |
265 | ||
266 | if (fe->port != -1 && fe->port != dev->link->ap->print_id) | |
267 | continue; | |
268 | ||
269 | if (fe->device != -1 && fe->device != devno && | |
270 | fe->device != alt_devno) | |
271 | continue; | |
272 | ||
273 | if (!fe->param.xfer_mask) | |
274 | continue; | |
275 | ||
276 | ata_unpack_xfermask(fe->param.xfer_mask, | |
277 | &pio_mask, &mwdma_mask, &udma_mask); | |
278 | if (udma_mask) | |
279 | dev->udma_mask = udma_mask; | |
280 | else if (mwdma_mask) { | |
281 | dev->udma_mask = 0; | |
282 | dev->mwdma_mask = mwdma_mask; | |
283 | } else { | |
284 | dev->udma_mask = 0; | |
285 | dev->mwdma_mask = 0; | |
286 | dev->pio_mask = pio_mask; | |
287 | } | |
288 | ||
289 | ata_dev_printk(dev, KERN_NOTICE, | |
290 | "FORCE: xfer_mask set to %s\n", fe->param.name); | |
291 | return; | |
292 | } | |
293 | } | |
294 | ||
295 | /** | |
296 | * ata_force_horkage - force horkage according to libata.force | |
297 | * @dev: ATA device of interest | |
298 | * | |
299 | * Force horkage according to libata.force and whine about it. | |
300 | * For consistency with link selection, device number 15 selects | |
301 | * the first device connected to the host link. | |
302 | * | |
303 | * LOCKING: | |
304 | * EH context. | |
305 | */ | |
306 | static void ata_force_horkage(struct ata_device *dev) | |
307 | { | |
308 | int devno = dev->link->pmp + dev->devno; | |
309 | int alt_devno = devno; | |
310 | int i; | |
311 | ||
312 | /* allow n.15 for the first device attached to host port */ | |
313 | if (ata_is_host_link(dev->link) && devno == 0) | |
314 | alt_devno = 15; | |
315 | ||
316 | for (i = 0; i < ata_force_tbl_size; i++) { | |
317 | const struct ata_force_ent *fe = &ata_force_tbl[i]; | |
318 | ||
319 | if (fe->port != -1 && fe->port != dev->link->ap->print_id) | |
320 | continue; | |
321 | ||
322 | if (fe->device != -1 && fe->device != devno && | |
323 | fe->device != alt_devno) | |
324 | continue; | |
325 | ||
326 | if (!(~dev->horkage & fe->param.horkage_on) && | |
327 | !(dev->horkage & fe->param.horkage_off)) | |
328 | continue; | |
329 | ||
330 | dev->horkage |= fe->param.horkage_on; | |
331 | dev->horkage &= ~fe->param.horkage_off; | |
332 | ||
333 | ata_dev_printk(dev, KERN_NOTICE, | |
334 | "FORCE: horkage modified (%s)\n", fe->param.name); | |
335 | } | |
336 | } | |
337 | ||
436d34b3 TH |
338 | /** |
339 | * atapi_cmd_type - Determine ATAPI command type from SCSI opcode | |
340 | * @opcode: SCSI opcode | |
341 | * | |
342 | * Determine ATAPI command type from @opcode. | |
343 | * | |
344 | * LOCKING: | |
345 | * None. | |
346 | * | |
347 | * RETURNS: | |
348 | * ATAPI_{READ|WRITE|READ_CD|PASS_THRU|MISC} | |
349 | */ | |
350 | int atapi_cmd_type(u8 opcode) | |
351 | { | |
352 | switch (opcode) { | |
353 | case GPCMD_READ_10: | |
354 | case GPCMD_READ_12: | |
355 | return ATAPI_READ; | |
356 | ||
357 | case GPCMD_WRITE_10: | |
358 | case GPCMD_WRITE_12: | |
359 | case GPCMD_WRITE_AND_VERIFY_10: | |
360 | return ATAPI_WRITE; | |
361 | ||
362 | case GPCMD_READ_CD: | |
363 | case GPCMD_READ_CD_MSF: | |
364 | return ATAPI_READ_CD; | |
365 | ||
e52dcc48 TH |
366 | case ATA_16: |
367 | case ATA_12: | |
368 | if (atapi_passthru16) | |
369 | return ATAPI_PASS_THRU; | |
370 | /* fall thru */ | |
436d34b3 TH |
371 | default: |
372 | return ATAPI_MISC; | |
373 | } | |
374 | } | |
375 | ||
1da177e4 LT |
376 | /** |
377 | * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure | |
378 | * @tf: Taskfile to convert | |
1da177e4 | 379 | * @pmp: Port multiplier port |
9977126c TH |
380 | * @is_cmd: This FIS is for command |
381 | * @fis: Buffer into which data will output | |
1da177e4 LT |
382 | * |
383 | * Converts a standard ATA taskfile to a Serial ATA | |
384 | * FIS structure (Register - Host to Device). | |
385 | * | |
386 | * LOCKING: | |
387 | * Inherited from caller. | |
388 | */ | |
9977126c | 389 | void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis) |
1da177e4 | 390 | { |
9977126c TH |
391 | fis[0] = 0x27; /* Register - Host to Device FIS */ |
392 | fis[1] = pmp & 0xf; /* Port multiplier number*/ | |
393 | if (is_cmd) | |
394 | fis[1] |= (1 << 7); /* bit 7 indicates Command FIS */ | |
395 | ||
1da177e4 LT |
396 | fis[2] = tf->command; |
397 | fis[3] = tf->feature; | |
398 | ||
399 | fis[4] = tf->lbal; | |
400 | fis[5] = tf->lbam; | |
401 | fis[6] = tf->lbah; | |
402 | fis[7] = tf->device; | |
403 | ||
404 | fis[8] = tf->hob_lbal; | |
405 | fis[9] = tf->hob_lbam; | |
406 | fis[10] = tf->hob_lbah; | |
407 | fis[11] = tf->hob_feature; | |
408 | ||
409 | fis[12] = tf->nsect; | |
410 | fis[13] = tf->hob_nsect; | |
411 | fis[14] = 0; | |
412 | fis[15] = tf->ctl; | |
413 | ||
414 | fis[16] = 0; | |
415 | fis[17] = 0; | |
416 | fis[18] = 0; | |
417 | fis[19] = 0; | |
418 | } | |
419 | ||
420 | /** | |
421 | * ata_tf_from_fis - Convert SATA FIS to ATA taskfile | |
422 | * @fis: Buffer from which data will be input | |
423 | * @tf: Taskfile to output | |
424 | * | |
e12a1be6 | 425 | * Converts a serial ATA FIS structure to a standard ATA taskfile. |
1da177e4 LT |
426 | * |
427 | * LOCKING: | |
428 | * Inherited from caller. | |
429 | */ | |
430 | ||
057ace5e | 431 | void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf) |
1da177e4 LT |
432 | { |
433 | tf->command = fis[2]; /* status */ | |
434 | tf->feature = fis[3]; /* error */ | |
435 | ||
436 | tf->lbal = fis[4]; | |
437 | tf->lbam = fis[5]; | |
438 | tf->lbah = fis[6]; | |
439 | tf->device = fis[7]; | |
440 | ||
441 | tf->hob_lbal = fis[8]; | |
442 | tf->hob_lbam = fis[9]; | |
443 | tf->hob_lbah = fis[10]; | |
444 | ||
445 | tf->nsect = fis[12]; | |
446 | tf->hob_nsect = fis[13]; | |
447 | } | |
448 | ||
8cbd6df1 AL |
449 | static const u8 ata_rw_cmds[] = { |
450 | /* pio multi */ | |
451 | ATA_CMD_READ_MULTI, | |
452 | ATA_CMD_WRITE_MULTI, | |
453 | ATA_CMD_READ_MULTI_EXT, | |
454 | ATA_CMD_WRITE_MULTI_EXT, | |
9a3dccc4 TH |
455 | 0, |
456 | 0, | |
457 | 0, | |
458 | ATA_CMD_WRITE_MULTI_FUA_EXT, | |
8cbd6df1 AL |
459 | /* pio */ |
460 | ATA_CMD_PIO_READ, | |
461 | ATA_CMD_PIO_WRITE, | |
462 | ATA_CMD_PIO_READ_EXT, | |
463 | ATA_CMD_PIO_WRITE_EXT, | |
9a3dccc4 TH |
464 | 0, |
465 | 0, | |
466 | 0, | |
467 | 0, | |
8cbd6df1 AL |
468 | /* dma */ |
469 | ATA_CMD_READ, | |
470 | ATA_CMD_WRITE, | |
471 | ATA_CMD_READ_EXT, | |
9a3dccc4 TH |
472 | ATA_CMD_WRITE_EXT, |
473 | 0, | |
474 | 0, | |
475 | 0, | |
476 | ATA_CMD_WRITE_FUA_EXT | |
8cbd6df1 | 477 | }; |
1da177e4 LT |
478 | |
479 | /** | |
8cbd6df1 | 480 | * ata_rwcmd_protocol - set taskfile r/w commands and protocol |
bd056d7e TH |
481 | * @tf: command to examine and configure |
482 | * @dev: device tf belongs to | |
1da177e4 | 483 | * |
2e9edbf8 | 484 | * Examine the device configuration and tf->flags to calculate |
8cbd6df1 | 485 | * the proper read/write commands and protocol to use. |
1da177e4 LT |
486 | * |
487 | * LOCKING: | |
488 | * caller. | |
489 | */ | |
bd056d7e | 490 | static int ata_rwcmd_protocol(struct ata_taskfile *tf, struct ata_device *dev) |
1da177e4 | 491 | { |
9a3dccc4 | 492 | u8 cmd; |
1da177e4 | 493 | |
9a3dccc4 | 494 | int index, fua, lba48, write; |
2e9edbf8 | 495 | |
9a3dccc4 | 496 | fua = (tf->flags & ATA_TFLAG_FUA) ? 4 : 0; |
8cbd6df1 AL |
497 | lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0; |
498 | write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0; | |
1da177e4 | 499 | |
8cbd6df1 AL |
500 | if (dev->flags & ATA_DFLAG_PIO) { |
501 | tf->protocol = ATA_PROT_PIO; | |
9a3dccc4 | 502 | index = dev->multi_count ? 0 : 8; |
9af5c9c9 | 503 | } else if (lba48 && (dev->link->ap->flags & ATA_FLAG_PIO_LBA48)) { |
8d238e01 AC |
504 | /* Unable to use DMA due to host limitation */ |
505 | tf->protocol = ATA_PROT_PIO; | |
0565c26d | 506 | index = dev->multi_count ? 0 : 8; |
8cbd6df1 AL |
507 | } else { |
508 | tf->protocol = ATA_PROT_DMA; | |
9a3dccc4 | 509 | index = 16; |
8cbd6df1 | 510 | } |
1da177e4 | 511 | |
9a3dccc4 TH |
512 | cmd = ata_rw_cmds[index + fua + lba48 + write]; |
513 | if (cmd) { | |
514 | tf->command = cmd; | |
515 | return 0; | |
516 | } | |
517 | return -1; | |
1da177e4 LT |
518 | } |
519 | ||
35b649fe TH |
520 | /** |
521 | * ata_tf_read_block - Read block address from ATA taskfile | |
522 | * @tf: ATA taskfile of interest | |
523 | * @dev: ATA device @tf belongs to | |
524 | * | |
525 | * LOCKING: | |
526 | * None. | |
527 | * | |
528 | * Read block address from @tf. This function can handle all | |
529 | * three address formats - LBA, LBA48 and CHS. tf->protocol and | |
530 | * flags select the address format to use. | |
531 | * | |
532 | * RETURNS: | |
533 | * Block address read from @tf. | |
534 | */ | |
535 | u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev) | |
536 | { | |
537 | u64 block = 0; | |
538 | ||
539 | if (tf->flags & ATA_TFLAG_LBA) { | |
540 | if (tf->flags & ATA_TFLAG_LBA48) { | |
541 | block |= (u64)tf->hob_lbah << 40; | |
542 | block |= (u64)tf->hob_lbam << 32; | |
543 | block |= tf->hob_lbal << 24; | |
544 | } else | |
545 | block |= (tf->device & 0xf) << 24; | |
546 | ||
547 | block |= tf->lbah << 16; | |
548 | block |= tf->lbam << 8; | |
549 | block |= tf->lbal; | |
550 | } else { | |
551 | u32 cyl, head, sect; | |
552 | ||
553 | cyl = tf->lbam | (tf->lbah << 8); | |
554 | head = tf->device & 0xf; | |
555 | sect = tf->lbal; | |
556 | ||
557 | block = (cyl * dev->heads + head) * dev->sectors + sect; | |
558 | } | |
559 | ||
560 | return block; | |
561 | } | |
562 | ||
bd056d7e TH |
563 | /** |
564 | * ata_build_rw_tf - Build ATA taskfile for given read/write request | |
565 | * @tf: Target ATA taskfile | |
566 | * @dev: ATA device @tf belongs to | |
567 | * @block: Block address | |
568 | * @n_block: Number of blocks | |
569 | * @tf_flags: RW/FUA etc... | |
570 | * @tag: tag | |
571 | * | |
572 | * LOCKING: | |
573 | * None. | |
574 | * | |
575 | * Build ATA taskfile @tf for read/write request described by | |
576 | * @block, @n_block, @tf_flags and @tag on @dev. | |
577 | * | |
578 | * RETURNS: | |
579 | * | |
580 | * 0 on success, -ERANGE if the request is too large for @dev, | |
581 | * -EINVAL if the request is invalid. | |
582 | */ | |
583 | int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, | |
584 | u64 block, u32 n_block, unsigned int tf_flags, | |
585 | unsigned int tag) | |
586 | { | |
587 | tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; | |
588 | tf->flags |= tf_flags; | |
589 | ||
6d1245bf | 590 | if (ata_ncq_enabled(dev) && likely(tag != ATA_TAG_INTERNAL)) { |
bd056d7e TH |
591 | /* yay, NCQ */ |
592 | if (!lba_48_ok(block, n_block)) | |
593 | return -ERANGE; | |
594 | ||
595 | tf->protocol = ATA_PROT_NCQ; | |
596 | tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48; | |
597 | ||
598 | if (tf->flags & ATA_TFLAG_WRITE) | |
599 | tf->command = ATA_CMD_FPDMA_WRITE; | |
600 | else | |
601 | tf->command = ATA_CMD_FPDMA_READ; | |
602 | ||
603 | tf->nsect = tag << 3; | |
604 | tf->hob_feature = (n_block >> 8) & 0xff; | |
605 | tf->feature = n_block & 0xff; | |
606 | ||
607 | tf->hob_lbah = (block >> 40) & 0xff; | |
608 | tf->hob_lbam = (block >> 32) & 0xff; | |
609 | tf->hob_lbal = (block >> 24) & 0xff; | |
610 | tf->lbah = (block >> 16) & 0xff; | |
611 | tf->lbam = (block >> 8) & 0xff; | |
612 | tf->lbal = block & 0xff; | |
613 | ||
614 | tf->device = 1 << 6; | |
615 | if (tf->flags & ATA_TFLAG_FUA) | |
616 | tf->device |= 1 << 7; | |
617 | } else if (dev->flags & ATA_DFLAG_LBA) { | |
618 | tf->flags |= ATA_TFLAG_LBA; | |
619 | ||
620 | if (lba_28_ok(block, n_block)) { | |
621 | /* use LBA28 */ | |
622 | tf->device |= (block >> 24) & 0xf; | |
623 | } else if (lba_48_ok(block, n_block)) { | |
624 | if (!(dev->flags & ATA_DFLAG_LBA48)) | |
625 | return -ERANGE; | |
626 | ||
627 | /* use LBA48 */ | |
628 | tf->flags |= ATA_TFLAG_LBA48; | |
629 | ||
630 | tf->hob_nsect = (n_block >> 8) & 0xff; | |
631 | ||
632 | tf->hob_lbah = (block >> 40) & 0xff; | |
633 | tf->hob_lbam = (block >> 32) & 0xff; | |
634 | tf->hob_lbal = (block >> 24) & 0xff; | |
635 | } else | |
636 | /* request too large even for LBA48 */ | |
637 | return -ERANGE; | |
638 | ||
639 | if (unlikely(ata_rwcmd_protocol(tf, dev) < 0)) | |
640 | return -EINVAL; | |
641 | ||
642 | tf->nsect = n_block & 0xff; | |
643 | ||
644 | tf->lbah = (block >> 16) & 0xff; | |
645 | tf->lbam = (block >> 8) & 0xff; | |
646 | tf->lbal = block & 0xff; | |
647 | ||
648 | tf->device |= ATA_LBA; | |
649 | } else { | |
650 | /* CHS */ | |
651 | u32 sect, head, cyl, track; | |
652 | ||
653 | /* The request -may- be too large for CHS addressing. */ | |
654 | if (!lba_28_ok(block, n_block)) | |
655 | return -ERANGE; | |
656 | ||
657 | if (unlikely(ata_rwcmd_protocol(tf, dev) < 0)) | |
658 | return -EINVAL; | |
659 | ||
660 | /* Convert LBA to CHS */ | |
661 | track = (u32)block / dev->sectors; | |
662 | cyl = track / dev->heads; | |
663 | head = track % dev->heads; | |
664 | sect = (u32)block % dev->sectors + 1; | |
665 | ||
666 | DPRINTK("block %u track %u cyl %u head %u sect %u\n", | |
667 | (u32)block, track, cyl, head, sect); | |
668 | ||
669 | /* Check whether the converted CHS can fit. | |
670 | Cylinder: 0-65535 | |
671 | Head: 0-15 | |
672 | Sector: 1-255*/ | |
673 | if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) | |
674 | return -ERANGE; | |
675 | ||
676 | tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ | |
677 | tf->lbal = sect; | |
678 | tf->lbam = cyl; | |
679 | tf->lbah = cyl >> 8; | |
680 | tf->device |= head; | |
681 | } | |
682 | ||
683 | return 0; | |
684 | } | |
685 | ||
cb95d562 TH |
686 | /** |
687 | * ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask | |
688 | * @pio_mask: pio_mask | |
689 | * @mwdma_mask: mwdma_mask | |
690 | * @udma_mask: udma_mask | |
691 | * | |
692 | * Pack @pio_mask, @mwdma_mask and @udma_mask into a single | |
693 | * unsigned int xfer_mask. | |
694 | * | |
695 | * LOCKING: | |
696 | * None. | |
697 | * | |
698 | * RETURNS: | |
699 | * Packed xfer_mask. | |
700 | */ | |
7dc951ae TH |
701 | unsigned long ata_pack_xfermask(unsigned long pio_mask, |
702 | unsigned long mwdma_mask, | |
703 | unsigned long udma_mask) | |
cb95d562 TH |
704 | { |
705 | return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) | | |
706 | ((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) | | |
707 | ((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA); | |
708 | } | |
709 | ||
c0489e4e TH |
710 | /** |
711 | * ata_unpack_xfermask - Unpack xfer_mask into pio, mwdma and udma masks | |
712 | * @xfer_mask: xfer_mask to unpack | |
713 | * @pio_mask: resulting pio_mask | |
714 | * @mwdma_mask: resulting mwdma_mask | |
715 | * @udma_mask: resulting udma_mask | |
716 | * | |
717 | * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask. | |
718 | * Any NULL distination masks will be ignored. | |
719 | */ | |
7dc951ae TH |
720 | void ata_unpack_xfermask(unsigned long xfer_mask, unsigned long *pio_mask, |
721 | unsigned long *mwdma_mask, unsigned long *udma_mask) | |
c0489e4e TH |
722 | { |
723 | if (pio_mask) | |
724 | *pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO; | |
725 | if (mwdma_mask) | |
726 | *mwdma_mask = (xfer_mask & ATA_MASK_MWDMA) >> ATA_SHIFT_MWDMA; | |
727 | if (udma_mask) | |
728 | *udma_mask = (xfer_mask & ATA_MASK_UDMA) >> ATA_SHIFT_UDMA; | |
729 | } | |
730 | ||
cb95d562 | 731 | static const struct ata_xfer_ent { |
be9a50c8 | 732 | int shift, bits; |
cb95d562 TH |
733 | u8 base; |
734 | } ata_xfer_tbl[] = { | |
70cd071e TH |
735 | { ATA_SHIFT_PIO, ATA_NR_PIO_MODES, XFER_PIO_0 }, |
736 | { ATA_SHIFT_MWDMA, ATA_NR_MWDMA_MODES, XFER_MW_DMA_0 }, | |
737 | { ATA_SHIFT_UDMA, ATA_NR_UDMA_MODES, XFER_UDMA_0 }, | |
cb95d562 TH |
738 | { -1, }, |
739 | }; | |
740 | ||
741 | /** | |
742 | * ata_xfer_mask2mode - Find matching XFER_* for the given xfer_mask | |
743 | * @xfer_mask: xfer_mask of interest | |
744 | * | |
745 | * Return matching XFER_* value for @xfer_mask. Only the highest | |
746 | * bit of @xfer_mask is considered. | |
747 | * | |
748 | * LOCKING: | |
749 | * None. | |
750 | * | |
751 | * RETURNS: | |
70cd071e | 752 | * Matching XFER_* value, 0xff if no match found. |
cb95d562 | 753 | */ |
7dc951ae | 754 | u8 ata_xfer_mask2mode(unsigned long xfer_mask) |
cb95d562 TH |
755 | { |
756 | int highbit = fls(xfer_mask) - 1; | |
757 | const struct ata_xfer_ent *ent; | |
758 | ||
759 | for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) | |
760 | if (highbit >= ent->shift && highbit < ent->shift + ent->bits) | |
761 | return ent->base + highbit - ent->shift; | |
70cd071e | 762 | return 0xff; |
cb95d562 TH |
763 | } |
764 | ||
765 | /** | |
766 | * ata_xfer_mode2mask - Find matching xfer_mask for XFER_* | |
767 | * @xfer_mode: XFER_* of interest | |
768 | * | |
769 | * Return matching xfer_mask for @xfer_mode. | |
770 | * | |
771 | * LOCKING: | |
772 | * None. | |
773 | * | |
774 | * RETURNS: | |
775 | * Matching xfer_mask, 0 if no match found. | |
776 | */ | |
7dc951ae | 777 | unsigned long ata_xfer_mode2mask(u8 xfer_mode) |
cb95d562 TH |
778 | { |
779 | const struct ata_xfer_ent *ent; | |
780 | ||
781 | for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) | |
782 | if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) | |
70cd071e TH |
783 | return ((2 << (ent->shift + xfer_mode - ent->base)) - 1) |
784 | & ~((1 << ent->shift) - 1); | |
cb95d562 TH |
785 | return 0; |
786 | } | |
787 | ||
788 | /** | |
789 | * ata_xfer_mode2shift - Find matching xfer_shift for XFER_* | |
790 | * @xfer_mode: XFER_* of interest | |
791 | * | |
792 | * Return matching xfer_shift for @xfer_mode. | |
793 | * | |
794 | * LOCKING: | |
795 | * None. | |
796 | * | |
797 | * RETURNS: | |
798 | * Matching xfer_shift, -1 if no match found. | |
799 | */ | |
7dc951ae | 800 | int ata_xfer_mode2shift(unsigned long xfer_mode) |
cb95d562 TH |
801 | { |
802 | const struct ata_xfer_ent *ent; | |
803 | ||
804 | for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) | |
805 | if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) | |
806 | return ent->shift; | |
807 | return -1; | |
808 | } | |
809 | ||
1da177e4 | 810 | /** |
1da7b0d0 TH |
811 | * ata_mode_string - convert xfer_mask to string |
812 | * @xfer_mask: mask of bits supported; only highest bit counts. | |
1da177e4 LT |
813 | * |
814 | * Determine string which represents the highest speed | |
1da7b0d0 | 815 | * (highest bit in @modemask). |
1da177e4 LT |
816 | * |
817 | * LOCKING: | |
818 | * None. | |
819 | * | |
820 | * RETURNS: | |
821 | * Constant C string representing highest speed listed in | |
1da7b0d0 | 822 | * @mode_mask, or the constant C string "<n/a>". |
1da177e4 | 823 | */ |
7dc951ae | 824 | const char *ata_mode_string(unsigned long xfer_mask) |
1da177e4 | 825 | { |
75f554bc TH |
826 | static const char * const xfer_mode_str[] = { |
827 | "PIO0", | |
828 | "PIO1", | |
829 | "PIO2", | |
830 | "PIO3", | |
831 | "PIO4", | |
b352e57d AC |
832 | "PIO5", |
833 | "PIO6", | |
75f554bc TH |
834 | "MWDMA0", |
835 | "MWDMA1", | |
836 | "MWDMA2", | |
b352e57d AC |
837 | "MWDMA3", |
838 | "MWDMA4", | |
75f554bc TH |
839 | "UDMA/16", |
840 | "UDMA/25", | |
841 | "UDMA/33", | |
842 | "UDMA/44", | |
843 | "UDMA/66", | |
844 | "UDMA/100", | |
845 | "UDMA/133", | |
846 | "UDMA7", | |
847 | }; | |
1da7b0d0 | 848 | int highbit; |
1da177e4 | 849 | |
1da7b0d0 TH |
850 | highbit = fls(xfer_mask) - 1; |
851 | if (highbit >= 0 && highbit < ARRAY_SIZE(xfer_mode_str)) | |
852 | return xfer_mode_str[highbit]; | |
1da177e4 | 853 | return "<n/a>"; |
1da177e4 LT |
854 | } |
855 | ||
4c360c81 TH |
856 | static const char *sata_spd_string(unsigned int spd) |
857 | { | |
858 | static const char * const spd_str[] = { | |
859 | "1.5 Gbps", | |
860 | "3.0 Gbps", | |
861 | }; | |
862 | ||
863 | if (spd == 0 || (spd - 1) >= ARRAY_SIZE(spd_str)) | |
864 | return "<unknown>"; | |
865 | return spd_str[spd - 1]; | |
866 | } | |
867 | ||
3373efd8 | 868 | void ata_dev_disable(struct ata_device *dev) |
0b8efb0a | 869 | { |
09d7f9b0 | 870 | if (ata_dev_enabled(dev)) { |
9af5c9c9 | 871 | if (ata_msg_drv(dev->link->ap)) |
09d7f9b0 | 872 | ata_dev_printk(dev, KERN_WARNING, "disabled\n"); |
562f0c2d | 873 | ata_acpi_on_disable(dev); |
4ae72a1e TH |
874 | ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | |
875 | ATA_DNXFER_QUIET); | |
0b8efb0a TH |
876 | dev->class++; |
877 | } | |
878 | } | |
879 | ||
ca77329f KCA |
880 | static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy) |
881 | { | |
882 | struct ata_link *link = dev->link; | |
883 | struct ata_port *ap = link->ap; | |
884 | u32 scontrol; | |
885 | unsigned int err_mask; | |
886 | int rc; | |
887 | ||
888 | /* | |
889 | * disallow DIPM for drivers which haven't set | |
890 | * ATA_FLAG_IPM. This is because when DIPM is enabled, | |
891 | * phy ready will be set in the interrupt status on | |
892 | * state changes, which will cause some drivers to | |
893 | * think there are errors - additionally drivers will | |
894 | * need to disable hot plug. | |
895 | */ | |
896 | if (!(ap->flags & ATA_FLAG_IPM) || !ata_dev_enabled(dev)) { | |
897 | ap->pm_policy = NOT_AVAILABLE; | |
898 | return -EINVAL; | |
899 | } | |
900 | ||
901 | /* | |
902 | * For DIPM, we will only enable it for the | |
903 | * min_power setting. | |
904 | * | |
905 | * Why? Because Disks are too stupid to know that | |
906 | * If the host rejects a request to go to SLUMBER | |
907 | * they should retry at PARTIAL, and instead it | |
908 | * just would give up. So, for medium_power to | |
909 | * work at all, we need to only allow HIPM. | |
910 | */ | |
911 | rc = sata_scr_read(link, SCR_CONTROL, &scontrol); | |
912 | if (rc) | |
913 | return rc; | |
914 | ||
915 | switch (policy) { | |
916 | case MIN_POWER: | |
917 | /* no restrictions on IPM transitions */ | |
918 | scontrol &= ~(0x3 << 8); | |
919 | rc = sata_scr_write(link, SCR_CONTROL, scontrol); | |
920 | if (rc) | |
921 | return rc; | |
922 | ||
923 | /* enable DIPM */ | |
924 | if (dev->flags & ATA_DFLAG_DIPM) | |
925 | err_mask = ata_dev_set_feature(dev, | |
926 | SETFEATURES_SATA_ENABLE, SATA_DIPM); | |
927 | break; | |
928 | case MEDIUM_POWER: | |
929 | /* allow IPM to PARTIAL */ | |
930 | scontrol &= ~(0x1 << 8); | |
931 | scontrol |= (0x2 << 8); | |
932 | rc = sata_scr_write(link, SCR_CONTROL, scontrol); | |
933 | if (rc) | |
934 | return rc; | |
935 | ||
f5456b63 KCA |
936 | /* |
937 | * we don't have to disable DIPM since IPM flags | |
938 | * disallow transitions to SLUMBER, which effectively | |
939 | * disable DIPM if it does not support PARTIAL | |
940 | */ | |
ca77329f KCA |
941 | break; |
942 | case NOT_AVAILABLE: | |
943 | case MAX_PERFORMANCE: | |
944 | /* disable all IPM transitions */ | |
945 | scontrol |= (0x3 << 8); | |
946 | rc = sata_scr_write(link, SCR_CONTROL, scontrol); | |
947 | if (rc) | |
948 | return rc; | |
949 | ||
f5456b63 KCA |
950 | /* |
951 | * we don't have to disable DIPM since IPM flags | |
952 | * disallow all transitions which effectively | |
953 | * disable DIPM anyway. | |
954 | */ | |
ca77329f KCA |
955 | break; |
956 | } | |
957 | ||
958 | /* FIXME: handle SET FEATURES failure */ | |
959 | (void) err_mask; | |
960 | ||
961 | return 0; | |
962 | } | |
963 | ||
964 | /** | |
965 | * ata_dev_enable_pm - enable SATA interface power management | |
48166fd9 SH |
966 | * @dev: device to enable power management |
967 | * @policy: the link power management policy | |
ca77329f KCA |
968 | * |
969 | * Enable SATA Interface power management. This will enable | |
970 | * Device Interface Power Management (DIPM) for min_power | |
971 | * policy, and then call driver specific callbacks for | |
972 | * enabling Host Initiated Power management. | |
973 | * | |
974 | * Locking: Caller. | |
975 | * Returns: -EINVAL if IPM is not supported, 0 otherwise. | |
976 | */ | |
977 | void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy) | |
978 | { | |
979 | int rc = 0; | |
980 | struct ata_port *ap = dev->link->ap; | |
981 | ||
982 | /* set HIPM first, then DIPM */ | |
983 | if (ap->ops->enable_pm) | |
984 | rc = ap->ops->enable_pm(ap, policy); | |
985 | if (rc) | |
986 | goto enable_pm_out; | |
987 | rc = ata_dev_set_dipm(dev, policy); | |
988 | ||
989 | enable_pm_out: | |
990 | if (rc) | |
991 | ap->pm_policy = MAX_PERFORMANCE; | |
992 | else | |
993 | ap->pm_policy = policy; | |
994 | return /* rc */; /* hopefully we can use 'rc' eventually */ | |
995 | } | |
996 | ||
1992a5ed | 997 | #ifdef CONFIG_PM |
ca77329f KCA |
998 | /** |
999 | * ata_dev_disable_pm - disable SATA interface power management | |
48166fd9 | 1000 | * @dev: device to disable power management |
ca77329f KCA |
1001 | * |
1002 | * Disable SATA Interface power management. This will disable | |
1003 | * Device Interface Power Management (DIPM) without changing | |
1004 | * policy, call driver specific callbacks for disabling Host | |
1005 | * Initiated Power management. | |
1006 | * | |
1007 | * Locking: Caller. | |
1008 | * Returns: void | |
1009 | */ | |
1010 | static void ata_dev_disable_pm(struct ata_device *dev) | |
1011 | { | |
1012 | struct ata_port *ap = dev->link->ap; | |
1013 | ||
1014 | ata_dev_set_dipm(dev, MAX_PERFORMANCE); | |
1015 | if (ap->ops->disable_pm) | |
1016 | ap->ops->disable_pm(ap); | |
1017 | } | |
1992a5ed | 1018 | #endif /* CONFIG_PM */ |
ca77329f KCA |
1019 | |
1020 | void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy) | |
1021 | { | |
1022 | ap->pm_policy = policy; | |
3ec25ebd | 1023 | ap->link.eh_info.action |= ATA_EH_LPM; |
ca77329f KCA |
1024 | ap->link.eh_info.flags |= ATA_EHI_NO_AUTOPSY; |
1025 | ata_port_schedule_eh(ap); | |
1026 | } | |
1027 | ||
1992a5ed | 1028 | #ifdef CONFIG_PM |
ca77329f KCA |
1029 | static void ata_lpm_enable(struct ata_host *host) |
1030 | { | |
1031 | struct ata_link *link; | |
1032 | struct ata_port *ap; | |
1033 | struct ata_device *dev; | |
1034 | int i; | |
1035 | ||
1036 | for (i = 0; i < host->n_ports; i++) { | |
1037 | ap = host->ports[i]; | |
1038 | ata_port_for_each_link(link, ap) { | |
1039 | ata_link_for_each_dev(dev, link) | |
1040 | ata_dev_disable_pm(dev); | |
1041 | } | |
1042 | } | |
1043 | } | |
1044 | ||
1045 | static void ata_lpm_disable(struct ata_host *host) | |
1046 | { | |
1047 | int i; | |
1048 | ||
1049 | for (i = 0; i < host->n_ports; i++) { | |
1050 | struct ata_port *ap = host->ports[i]; | |
1051 | ata_lpm_schedule(ap, ap->pm_policy); | |
1052 | } | |
1053 | } | |
1992a5ed | 1054 | #endif /* CONFIG_PM */ |
ca77329f | 1055 | |
1da177e4 LT |
1056 | /** |
1057 | * ata_dev_classify - determine device type based on ATA-spec signature | |
1058 | * @tf: ATA taskfile register set for device to be identified | |
1059 | * | |
1060 | * Determine from taskfile register contents whether a device is | |
1061 | * ATA or ATAPI, as per "Signature and persistence" section | |
1062 | * of ATA/PI spec (volume 1, sect 5.14). | |
1063 | * | |
1064 | * LOCKING: | |
1065 | * None. | |
1066 | * | |
1067 | * RETURNS: | |
633273a3 TH |
1068 | * Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, %ATA_DEV_PMP or |
1069 | * %ATA_DEV_UNKNOWN the event of failure. | |
1da177e4 | 1070 | */ |
057ace5e | 1071 | unsigned int ata_dev_classify(const struct ata_taskfile *tf) |
1da177e4 LT |
1072 | { |
1073 | /* Apple's open source Darwin code hints that some devices only | |
1074 | * put a proper signature into the LBA mid/high registers, | |
1075 | * So, we only check those. It's sufficient for uniqueness. | |
633273a3 TH |
1076 | * |
1077 | * ATA/ATAPI-7 (d1532v1r1: Feb. 19, 2003) specified separate | |
1078 | * signatures for ATA and ATAPI devices attached on SerialATA, | |
1079 | * 0x3c/0xc3 and 0x69/0x96 respectively. However, SerialATA | |
1080 | * spec has never mentioned about using different signatures | |
1081 | * for ATA/ATAPI devices. Then, Serial ATA II: Port | |
1082 | * Multiplier specification began to use 0x69/0x96 to identify | |
1083 | * port multpliers and 0x3c/0xc3 to identify SEMB device. | |
1084 | * ATA/ATAPI-7 dropped descriptions about 0x3c/0xc3 and | |
1085 | * 0x69/0x96 shortly and described them as reserved for | |
1086 | * SerialATA. | |
1087 | * | |
1088 | * We follow the current spec and consider that 0x69/0x96 | |
1089 | * identifies a port multiplier and 0x3c/0xc3 a SEMB device. | |
1da177e4 | 1090 | */ |
633273a3 | 1091 | if ((tf->lbam == 0) && (tf->lbah == 0)) { |
1da177e4 LT |
1092 | DPRINTK("found ATA device by sig\n"); |
1093 | return ATA_DEV_ATA; | |
1094 | } | |
1095 | ||
633273a3 | 1096 | if ((tf->lbam == 0x14) && (tf->lbah == 0xeb)) { |
1da177e4 LT |
1097 | DPRINTK("found ATAPI device by sig\n"); |
1098 | return ATA_DEV_ATAPI; | |
1099 | } | |
1100 | ||
633273a3 TH |
1101 | if ((tf->lbam == 0x69) && (tf->lbah == 0x96)) { |
1102 | DPRINTK("found PMP device by sig\n"); | |
1103 | return ATA_DEV_PMP; | |
1104 | } | |
1105 | ||
1106 | if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) { | |
2dcb407e | 1107 | printk(KERN_INFO "ata: SEMB device ignored\n"); |
633273a3 TH |
1108 | return ATA_DEV_SEMB_UNSUP; /* not yet */ |
1109 | } | |
1110 | ||
1da177e4 LT |
1111 | DPRINTK("unknown device\n"); |
1112 | return ATA_DEV_UNKNOWN; | |
1113 | } | |
1114 | ||
1da177e4 | 1115 | /** |
6a62a04d | 1116 | * ata_id_string - Convert IDENTIFY DEVICE page into string |
1da177e4 LT |
1117 | * @id: IDENTIFY DEVICE results we will examine |
1118 | * @s: string into which data is output | |
1119 | * @ofs: offset into identify device page | |
1120 | * @len: length of string to return. must be an even number. | |
1121 | * | |
1122 | * The strings in the IDENTIFY DEVICE page are broken up into | |
1123 | * 16-bit chunks. Run through the string, and output each | |
1124 | * 8-bit chunk linearly, regardless of platform. | |
1125 | * | |
1126 | * LOCKING: | |
1127 | * caller. | |
1128 | */ | |
1129 | ||
6a62a04d TH |
1130 | void ata_id_string(const u16 *id, unsigned char *s, |
1131 | unsigned int ofs, unsigned int len) | |
1da177e4 LT |
1132 | { |
1133 | unsigned int c; | |
1134 | ||
1135 | while (len > 0) { | |
1136 | c = id[ofs] >> 8; | |
1137 | *s = c; | |
1138 | s++; | |
1139 | ||
1140 | c = id[ofs] & 0xff; | |
1141 | *s = c; | |
1142 | s++; | |
1143 | ||
1144 | ofs++; | |
1145 | len -= 2; | |
1146 | } | |
1147 | } | |
1148 | ||
0e949ff3 | 1149 | /** |
6a62a04d | 1150 | * ata_id_c_string - Convert IDENTIFY DEVICE page into C string |
0e949ff3 TH |
1151 | * @id: IDENTIFY DEVICE results we will examine |
1152 | * @s: string into which data is output | |
1153 | * @ofs: offset into identify device page | |
1154 | * @len: length of string to return. must be an odd number. | |
1155 | * | |
6a62a04d | 1156 | * This function is identical to ata_id_string except that it |
0e949ff3 TH |
1157 | * trims trailing spaces and terminates the resulting string with |
1158 | * null. @len must be actual maximum length (even number) + 1. | |
1159 | * | |
1160 | * LOCKING: | |
1161 | * caller. | |
1162 | */ | |
6a62a04d TH |
1163 | void ata_id_c_string(const u16 *id, unsigned char *s, |
1164 | unsigned int ofs, unsigned int len) | |
0e949ff3 TH |
1165 | { |
1166 | unsigned char *p; | |
1167 | ||
1168 | WARN_ON(!(len & 1)); | |
1169 | ||
6a62a04d | 1170 | ata_id_string(id, s, ofs, len - 1); |
0e949ff3 TH |
1171 | |
1172 | p = s + strnlen(s, len - 1); | |
1173 | while (p > s && p[-1] == ' ') | |
1174 | p--; | |
1175 | *p = '\0'; | |
1176 | } | |
0baab86b | 1177 | |
db6f8759 TH |
1178 | static u64 ata_id_n_sectors(const u16 *id) |
1179 | { | |
1180 | if (ata_id_has_lba(id)) { | |
1181 | if (ata_id_has_lba48(id)) | |
1182 | return ata_id_u64(id, 100); | |
1183 | else | |
1184 | return ata_id_u32(id, 60); | |
1185 | } else { | |
1186 | if (ata_id_current_chs_valid(id)) | |
1187 | return ata_id_u32(id, 57); | |
1188 | else | |
1189 | return id[1] * id[3] * id[6]; | |
1190 | } | |
1191 | } | |
1192 | ||
a5987e0a | 1193 | u64 ata_tf_to_lba48(const struct ata_taskfile *tf) |
1e999736 AC |
1194 | { |
1195 | u64 sectors = 0; | |
1196 | ||
1197 | sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40; | |
1198 | sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32; | |
1199 | sectors |= (tf->hob_lbal & 0xff) << 24; | |
1200 | sectors |= (tf->lbah & 0xff) << 16; | |
1201 | sectors |= (tf->lbam & 0xff) << 8; | |
1202 | sectors |= (tf->lbal & 0xff); | |
1203 | ||
a5987e0a | 1204 | return sectors; |
1e999736 AC |
1205 | } |
1206 | ||
a5987e0a | 1207 | u64 ata_tf_to_lba(const struct ata_taskfile *tf) |
1e999736 AC |
1208 | { |
1209 | u64 sectors = 0; | |
1210 | ||
1211 | sectors |= (tf->device & 0x0f) << 24; | |
1212 | sectors |= (tf->lbah & 0xff) << 16; | |
1213 | sectors |= (tf->lbam & 0xff) << 8; | |
1214 | sectors |= (tf->lbal & 0xff); | |
1215 | ||
a5987e0a | 1216 | return sectors; |
1e999736 AC |
1217 | } |
1218 | ||
1219 | /** | |
c728a914 TH |
1220 | * ata_read_native_max_address - Read native max address |
1221 | * @dev: target device | |
1222 | * @max_sectors: out parameter for the result native max address | |
1e999736 | 1223 | * |
c728a914 TH |
1224 | * Perform an LBA48 or LBA28 native size query upon the device in |
1225 | * question. | |
1e999736 | 1226 | * |
c728a914 TH |
1227 | * RETURNS: |
1228 | * 0 on success, -EACCES if command is aborted by the drive. | |
1229 | * -EIO on other errors. | |
1e999736 | 1230 | */ |
c728a914 | 1231 | static int ata_read_native_max_address(struct ata_device *dev, u64 *max_sectors) |
1e999736 | 1232 | { |
c728a914 | 1233 | unsigned int err_mask; |
1e999736 | 1234 | struct ata_taskfile tf; |
c728a914 | 1235 | int lba48 = ata_id_has_lba48(dev->id); |
1e999736 AC |
1236 | |
1237 | ata_tf_init(dev, &tf); | |
1238 | ||
c728a914 | 1239 | /* always clear all address registers */ |
1e999736 | 1240 | tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; |
1e999736 | 1241 | |
c728a914 TH |
1242 | if (lba48) { |
1243 | tf.command = ATA_CMD_READ_NATIVE_MAX_EXT; | |
1244 | tf.flags |= ATA_TFLAG_LBA48; | |
1245 | } else | |
1246 | tf.command = ATA_CMD_READ_NATIVE_MAX; | |
1e999736 | 1247 | |
1e999736 | 1248 | tf.protocol |= ATA_PROT_NODATA; |
c728a914 TH |
1249 | tf.device |= ATA_LBA; |
1250 | ||
2b789108 | 1251 | err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); |
c728a914 TH |
1252 | if (err_mask) { |
1253 | ata_dev_printk(dev, KERN_WARNING, "failed to read native " | |
1254 | "max address (err_mask=0x%x)\n", err_mask); | |
1255 | if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED)) | |
1256 | return -EACCES; | |
1257 | return -EIO; | |
1258 | } | |
1e999736 | 1259 | |
c728a914 | 1260 | if (lba48) |
a5987e0a | 1261 | *max_sectors = ata_tf_to_lba48(&tf) + 1; |
c728a914 | 1262 | else |
a5987e0a | 1263 | *max_sectors = ata_tf_to_lba(&tf) + 1; |
2dcb407e | 1264 | if (dev->horkage & ATA_HORKAGE_HPA_SIZE) |
93328e11 | 1265 | (*max_sectors)--; |
c728a914 | 1266 | return 0; |
1e999736 AC |
1267 | } |
1268 | ||
1269 | /** | |
c728a914 TH |
1270 | * ata_set_max_sectors - Set max sectors |
1271 | * @dev: target device | |
6b38d1d1 | 1272 | * @new_sectors: new max sectors value to set for the device |
1e999736 | 1273 | * |
c728a914 TH |
1274 | * Set max sectors of @dev to @new_sectors. |
1275 | * | |
1276 | * RETURNS: | |
1277 | * 0 on success, -EACCES if command is aborted or denied (due to | |
1278 | * previous non-volatile SET_MAX) by the drive. -EIO on other | |
1279 | * errors. | |
1e999736 | 1280 | */ |
05027adc | 1281 | static int ata_set_max_sectors(struct ata_device *dev, u64 new_sectors) |
1e999736 | 1282 | { |
c728a914 | 1283 | unsigned int err_mask; |
1e999736 | 1284 | struct ata_taskfile tf; |
c728a914 | 1285 | int lba48 = ata_id_has_lba48(dev->id); |
1e999736 AC |
1286 | |
1287 | new_sectors--; | |
1288 | ||
1289 | ata_tf_init(dev, &tf); | |
1290 | ||
1e999736 | 1291 | tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; |
c728a914 TH |
1292 | |
1293 | if (lba48) { | |
1294 | tf.command = ATA_CMD_SET_MAX_EXT; | |
1295 | tf.flags |= ATA_TFLAG_LBA48; | |
1296 | ||
1297 | tf.hob_lbal = (new_sectors >> 24) & 0xff; | |
1298 | tf.hob_lbam = (new_sectors >> 32) & 0xff; | |
1299 | tf.hob_lbah = (new_sectors >> 40) & 0xff; | |
1e582ba4 | 1300 | } else { |
c728a914 TH |
1301 | tf.command = ATA_CMD_SET_MAX; |
1302 | ||
1e582ba4 TH |
1303 | tf.device |= (new_sectors >> 24) & 0xf; |
1304 | } | |
1305 | ||
1e999736 | 1306 | tf.protocol |= ATA_PROT_NODATA; |
c728a914 | 1307 | tf.device |= ATA_LBA; |
1e999736 AC |
1308 | |
1309 | tf.lbal = (new_sectors >> 0) & 0xff; | |
1310 | tf.lbam = (new_sectors >> 8) & 0xff; | |
1311 | tf.lbah = (new_sectors >> 16) & 0xff; | |
1e999736 | 1312 | |
2b789108 | 1313 | err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); |
c728a914 TH |
1314 | if (err_mask) { |
1315 | ata_dev_printk(dev, KERN_WARNING, "failed to set " | |
1316 | "max address (err_mask=0x%x)\n", err_mask); | |
1317 | if (err_mask == AC_ERR_DEV && | |
1318 | (tf.feature & (ATA_ABORTED | ATA_IDNF))) | |
1319 | return -EACCES; | |
1320 | return -EIO; | |
1321 | } | |
1322 | ||
c728a914 | 1323 | return 0; |
1e999736 AC |
1324 | } |
1325 | ||
1326 | /** | |
1327 | * ata_hpa_resize - Resize a device with an HPA set | |
1328 | * @dev: Device to resize | |
1329 | * | |
1330 | * Read the size of an LBA28 or LBA48 disk with HPA features and resize | |
1331 | * it if required to the full size of the media. The caller must check | |
1332 | * the drive has the HPA feature set enabled. | |
05027adc TH |
1333 | * |
1334 | * RETURNS: | |
1335 | * 0 on success, -errno on failure. | |
1e999736 | 1336 | */ |
05027adc | 1337 | static int ata_hpa_resize(struct ata_device *dev) |
1e999736 | 1338 | { |
05027adc TH |
1339 | struct ata_eh_context *ehc = &dev->link->eh_context; |
1340 | int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; | |
1341 | u64 sectors = ata_id_n_sectors(dev->id); | |
1342 | u64 native_sectors; | |
c728a914 | 1343 | int rc; |
a617c09f | 1344 | |
05027adc TH |
1345 | /* do we need to do it? */ |
1346 | if (dev->class != ATA_DEV_ATA || | |
1347 | !ata_id_has_lba(dev->id) || !ata_id_hpa_enabled(dev->id) || | |
1348 | (dev->horkage & ATA_HORKAGE_BROKEN_HPA)) | |
c728a914 | 1349 | return 0; |
1e999736 | 1350 | |
05027adc TH |
1351 | /* read native max address */ |
1352 | rc = ata_read_native_max_address(dev, &native_sectors); | |
1353 | if (rc) { | |
dda7aba1 TH |
1354 | /* If device aborted the command or HPA isn't going to |
1355 | * be unlocked, skip HPA resizing. | |
05027adc | 1356 | */ |
dda7aba1 | 1357 | if (rc == -EACCES || !ata_ignore_hpa) { |
05027adc | 1358 | ata_dev_printk(dev, KERN_WARNING, "HPA support seems " |
dda7aba1 | 1359 | "broken, skipping HPA handling\n"); |
05027adc TH |
1360 | dev->horkage |= ATA_HORKAGE_BROKEN_HPA; |
1361 | ||
1362 | /* we can continue if device aborted the command */ | |
1363 | if (rc == -EACCES) | |
1364 | rc = 0; | |
1e999736 | 1365 | } |
37301a55 | 1366 | |
05027adc TH |
1367 | return rc; |
1368 | } | |
1369 | ||
1370 | /* nothing to do? */ | |
1371 | if (native_sectors <= sectors || !ata_ignore_hpa) { | |
1372 | if (!print_info || native_sectors == sectors) | |
1373 | return 0; | |
1374 | ||
1375 | if (native_sectors > sectors) | |
1376 | ata_dev_printk(dev, KERN_INFO, | |
1377 | "HPA detected: current %llu, native %llu\n", | |
1378 | (unsigned long long)sectors, | |
1379 | (unsigned long long)native_sectors); | |
1380 | else if (native_sectors < sectors) | |
1381 | ata_dev_printk(dev, KERN_WARNING, | |
1382 | "native sectors (%llu) is smaller than " | |
1383 | "sectors (%llu)\n", | |
1384 | (unsigned long long)native_sectors, | |
1385 | (unsigned long long)sectors); | |
1386 | return 0; | |
1387 | } | |
1388 | ||
1389 | /* let's unlock HPA */ | |
1390 | rc = ata_set_max_sectors(dev, native_sectors); | |
1391 | if (rc == -EACCES) { | |
1392 | /* if device aborted the command, skip HPA resizing */ | |
1393 | ata_dev_printk(dev, KERN_WARNING, "device aborted resize " | |
1394 | "(%llu -> %llu), skipping HPA handling\n", | |
1395 | (unsigned long long)sectors, | |
1396 | (unsigned long long)native_sectors); | |
1397 | dev->horkage |= ATA_HORKAGE_BROKEN_HPA; | |
1398 | return 0; | |
1399 | } else if (rc) | |
1400 | return rc; | |
1401 | ||
1402 | /* re-read IDENTIFY data */ | |
1403 | rc = ata_dev_reread_id(dev, 0); | |
1404 | if (rc) { | |
1405 | ata_dev_printk(dev, KERN_ERR, "failed to re-read IDENTIFY " | |
1406 | "data after HPA resizing\n"); | |
1407 | return rc; | |
1408 | } | |
1409 | ||
1410 | if (print_info) { | |
1411 | u64 new_sectors = ata_id_n_sectors(dev->id); | |
1412 | ata_dev_printk(dev, KERN_INFO, | |
1413 | "HPA unlocked: %llu -> %llu, native %llu\n", | |
1414 | (unsigned long long)sectors, | |
1415 | (unsigned long long)new_sectors, | |
1416 | (unsigned long long)native_sectors); | |
1417 | } | |
1418 | ||
1419 | return 0; | |
1e999736 AC |
1420 | } |
1421 | ||
1da177e4 LT |
1422 | /** |
1423 | * ata_dump_id - IDENTIFY DEVICE info debugging output | |
0bd3300a | 1424 | * @id: IDENTIFY DEVICE page to dump |
1da177e4 | 1425 | * |
0bd3300a TH |
1426 | * Dump selected 16-bit words from the given IDENTIFY DEVICE |
1427 | * page. | |
1da177e4 LT |
1428 | * |
1429 | * LOCKING: | |
1430 | * caller. | |
1431 | */ | |
1432 | ||
0bd3300a | 1433 | static inline void ata_dump_id(const u16 *id) |
1da177e4 LT |
1434 | { |
1435 | DPRINTK("49==0x%04x " | |
1436 | "53==0x%04x " | |
1437 | "63==0x%04x " | |
1438 | "64==0x%04x " | |
1439 | "75==0x%04x \n", | |
0bd3300a TH |
1440 | id[49], |
1441 | id[53], | |
1442 | id[63], | |
1443 | id[64], | |
1444 | id[75]); | |
1da177e4 LT |
1445 | DPRINTK("80==0x%04x " |
1446 | "81==0x%04x " | |
1447 | "82==0x%04x " | |
1448 | "83==0x%04x " | |
1449 | "84==0x%04x \n", | |
0bd3300a TH |
1450 | id[80], |
1451 | id[81], | |
1452 | id[82], | |
1453 | id[83], | |
1454 | id[84]); | |
1da177e4 LT |
1455 | DPRINTK("88==0x%04x " |
1456 | "93==0x%04x\n", | |
0bd3300a TH |
1457 | id[88], |
1458 | id[93]); | |
1da177e4 LT |
1459 | } |
1460 | ||
cb95d562 TH |
1461 | /** |
1462 | * ata_id_xfermask - Compute xfermask from the given IDENTIFY data | |
1463 | * @id: IDENTIFY data to compute xfer mask from | |
1464 | * | |
1465 | * Compute the xfermask for this device. This is not as trivial | |
1466 | * as it seems if we must consider early devices correctly. | |
1467 | * | |
1468 | * FIXME: pre IDE drive timing (do we care ?). | |
1469 | * | |
1470 | * LOCKING: | |
1471 | * None. | |
1472 | * | |
1473 | * RETURNS: | |
1474 | * Computed xfermask | |
1475 | */ | |
7dc951ae | 1476 | unsigned long ata_id_xfermask(const u16 *id) |
cb95d562 | 1477 | { |
7dc951ae | 1478 | unsigned long pio_mask, mwdma_mask, udma_mask; |
cb95d562 TH |
1479 | |
1480 | /* Usual case. Word 53 indicates word 64 is valid */ | |
1481 | if (id[ATA_ID_FIELD_VALID] & (1 << 1)) { | |
1482 | pio_mask = id[ATA_ID_PIO_MODES] & 0x03; | |
1483 | pio_mask <<= 3; | |
1484 | pio_mask |= 0x7; | |
1485 | } else { | |
1486 | /* If word 64 isn't valid then Word 51 high byte holds | |
1487 | * the PIO timing number for the maximum. Turn it into | |
1488 | * a mask. | |
1489 | */ | |
7a0f1c8a | 1490 | u8 mode = (id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF; |
46767aeb | 1491 | if (mode < 5) /* Valid PIO range */ |
2dcb407e | 1492 | pio_mask = (2 << mode) - 1; |
46767aeb AC |
1493 | else |
1494 | pio_mask = 1; | |
cb95d562 TH |
1495 | |
1496 | /* But wait.. there's more. Design your standards by | |
1497 | * committee and you too can get a free iordy field to | |
1498 | * process. However its the speeds not the modes that | |
1499 | * are supported... Note drivers using the timing API | |
1500 | * will get this right anyway | |
1501 | */ | |
1502 | } | |
1503 | ||
1504 | mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07; | |
fb21f0d0 | 1505 | |
b352e57d AC |
1506 | if (ata_id_is_cfa(id)) { |
1507 | /* | |
1508 | * Process compact flash extended modes | |
1509 | */ | |
1510 | int pio = id[163] & 0x7; | |
1511 | int dma = (id[163] >> 3) & 7; | |
1512 | ||
1513 | if (pio) | |
1514 | pio_mask |= (1 << 5); | |
1515 | if (pio > 1) | |
1516 | pio_mask |= (1 << 6); | |
1517 | if (dma) | |
1518 | mwdma_mask |= (1 << 3); | |
1519 | if (dma > 1) | |
1520 | mwdma_mask |= (1 << 4); | |
1521 | } | |
1522 | ||
fb21f0d0 TH |
1523 | udma_mask = 0; |
1524 | if (id[ATA_ID_FIELD_VALID] & (1 << 2)) | |
1525 | udma_mask = id[ATA_ID_UDMA_MODES] & 0xff; | |
cb95d562 TH |
1526 | |
1527 | return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); | |
1528 | } | |
1529 | ||
86e45b6b | 1530 | /** |
442eacc3 | 1531 | * ata_pio_queue_task - Queue port_task |
86e45b6b | 1532 | * @ap: The ata_port to queue port_task for |
e2a7f77a | 1533 | * @fn: workqueue function to be scheduled |
65f27f38 | 1534 | * @data: data for @fn to use |
341c2c95 | 1535 | * @delay: delay time in msecs for workqueue function |
86e45b6b TH |
1536 | * |
1537 | * Schedule @fn(@data) for execution after @delay jiffies using | |
1538 | * port_task. There is one port_task per port and it's the | |
1539 | * user(low level driver)'s responsibility to make sure that only | |
1540 | * one task is active at any given time. | |
1541 | * | |
1542 | * libata core layer takes care of synchronization between | |
442eacc3 | 1543 | * port_task and EH. ata_pio_queue_task() may be ignored for EH |
86e45b6b TH |
1544 | * synchronization. |
1545 | * | |
1546 | * LOCKING: | |
1547 | * Inherited from caller. | |
1548 | */ | |
624d5c51 | 1549 | void ata_pio_queue_task(struct ata_port *ap, void *data, unsigned long delay) |
86e45b6b | 1550 | { |
65f27f38 | 1551 | ap->port_task_data = data; |
86e45b6b | 1552 | |
45a66c1c | 1553 | /* may fail if ata_port_flush_task() in progress */ |
341c2c95 | 1554 | queue_delayed_work(ata_wq, &ap->port_task, msecs_to_jiffies(delay)); |
86e45b6b TH |
1555 | } |
1556 | ||
1557 | /** | |
1558 | * ata_port_flush_task - Flush port_task | |
1559 | * @ap: The ata_port to flush port_task for | |
1560 | * | |
1561 | * After this function completes, port_task is guranteed not to | |
1562 | * be running or scheduled. | |
1563 | * | |
1564 | * LOCKING: | |
1565 | * Kernel thread context (may sleep) | |
1566 | */ | |
1567 | void ata_port_flush_task(struct ata_port *ap) | |
1568 | { | |
86e45b6b TH |
1569 | DPRINTK("ENTER\n"); |
1570 | ||
45a66c1c | 1571 | cancel_rearming_delayed_work(&ap->port_task); |
86e45b6b | 1572 | |
0dd4b21f | 1573 | if (ata_msg_ctl(ap)) |
7f5e4e8d | 1574 | ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __func__); |
86e45b6b TH |
1575 | } |
1576 | ||
7102d230 | 1577 | static void ata_qc_complete_internal(struct ata_queued_cmd *qc) |
a2a7a662 | 1578 | { |
77853bf2 | 1579 | struct completion *waiting = qc->private_data; |
a2a7a662 | 1580 | |
a2a7a662 | 1581 | complete(waiting); |
a2a7a662 TH |
1582 | } |
1583 | ||
1584 | /** | |
2432697b | 1585 | * ata_exec_internal_sg - execute libata internal command |
a2a7a662 TH |
1586 | * @dev: Device to which the command is sent |
1587 | * @tf: Taskfile registers for the command and the result | |
d69cf37d | 1588 | * @cdb: CDB for packet command |
a2a7a662 | 1589 | * @dma_dir: Data tranfer direction of the command |
5c1ad8b3 | 1590 | * @sgl: sg list for the data buffer of the command |
2432697b | 1591 | * @n_elem: Number of sg entries |
2b789108 | 1592 | * @timeout: Timeout in msecs (0 for default) |
a2a7a662 TH |
1593 | * |
1594 | * Executes libata internal command with timeout. @tf contains | |
1595 | * command on entry and result on return. Timeout and error | |
1596 | * conditions are reported via return value. No recovery action | |
1597 | * is taken after a command times out. It's caller's duty to | |
1598 | * clean up after timeout. | |
1599 | * | |
1600 | * LOCKING: | |
1601 | * None. Should be called with kernel context, might sleep. | |
551e8889 TH |
1602 | * |
1603 | * RETURNS: | |
1604 | * Zero on success, AC_ERR_* mask on failure | |
a2a7a662 | 1605 | */ |
2432697b TH |
1606 | unsigned ata_exec_internal_sg(struct ata_device *dev, |
1607 | struct ata_taskfile *tf, const u8 *cdb, | |
87260216 | 1608 | int dma_dir, struct scatterlist *sgl, |
2b789108 | 1609 | unsigned int n_elem, unsigned long timeout) |
a2a7a662 | 1610 | { |
9af5c9c9 TH |
1611 | struct ata_link *link = dev->link; |
1612 | struct ata_port *ap = link->ap; | |
a2a7a662 | 1613 | u8 command = tf->command; |
87fbc5a0 | 1614 | int auto_timeout = 0; |
a2a7a662 | 1615 | struct ata_queued_cmd *qc; |
2ab7db1f | 1616 | unsigned int tag, preempted_tag; |
dedaf2b0 | 1617 | u32 preempted_sactive, preempted_qc_active; |
da917d69 | 1618 | int preempted_nr_active_links; |
60be6b9a | 1619 | DECLARE_COMPLETION_ONSTACK(wait); |
a2a7a662 | 1620 | unsigned long flags; |
77853bf2 | 1621 | unsigned int err_mask; |
d95a717f | 1622 | int rc; |
a2a7a662 | 1623 | |
ba6a1308 | 1624 | spin_lock_irqsave(ap->lock, flags); |
a2a7a662 | 1625 | |
e3180499 | 1626 | /* no internal command while frozen */ |
b51e9e5d | 1627 | if (ap->pflags & ATA_PFLAG_FROZEN) { |
ba6a1308 | 1628 | spin_unlock_irqrestore(ap->lock, flags); |
e3180499 TH |
1629 | return AC_ERR_SYSTEM; |
1630 | } | |
1631 | ||
2ab7db1f | 1632 | /* initialize internal qc */ |
a2a7a662 | 1633 | |
2ab7db1f TH |
1634 | /* XXX: Tag 0 is used for drivers with legacy EH as some |
1635 | * drivers choke if any other tag is given. This breaks | |
1636 | * ata_tag_internal() test for those drivers. Don't use new | |
1637 | * EH stuff without converting to it. | |
1638 | */ | |
1639 | if (ap->ops->error_handler) | |
1640 | tag = ATA_TAG_INTERNAL; | |
1641 | else | |
1642 | tag = 0; | |
1643 | ||
6cec4a39 | 1644 | if (test_and_set_bit(tag, &ap->qc_allocated)) |
2ab7db1f | 1645 | BUG(); |
f69499f4 | 1646 | qc = __ata_qc_from_tag(ap, tag); |
2ab7db1f TH |
1647 | |
1648 | qc->tag = tag; | |
1649 | qc->scsicmd = NULL; | |
1650 | qc->ap = ap; | |
1651 | qc->dev = dev; | |
1652 | ata_qc_reinit(qc); | |
1653 | ||
9af5c9c9 TH |
1654 | preempted_tag = link->active_tag; |
1655 | preempted_sactive = link->sactive; | |
dedaf2b0 | 1656 | preempted_qc_active = ap->qc_active; |
da917d69 | 1657 | preempted_nr_active_links = ap->nr_active_links; |
9af5c9c9 TH |
1658 | link->active_tag = ATA_TAG_POISON; |
1659 | link->sactive = 0; | |
dedaf2b0 | 1660 | ap->qc_active = 0; |
da917d69 | 1661 | ap->nr_active_links = 0; |
2ab7db1f TH |
1662 | |
1663 | /* prepare & issue qc */ | |
a2a7a662 | 1664 | qc->tf = *tf; |
d69cf37d TH |
1665 | if (cdb) |
1666 | memcpy(qc->cdb, cdb, ATAPI_CDB_LEN); | |
e61e0672 | 1667 | qc->flags |= ATA_QCFLAG_RESULT_TF; |
a2a7a662 TH |
1668 | qc->dma_dir = dma_dir; |
1669 | if (dma_dir != DMA_NONE) { | |
2432697b | 1670 | unsigned int i, buflen = 0; |
87260216 | 1671 | struct scatterlist *sg; |
2432697b | 1672 | |
87260216 JA |
1673 | for_each_sg(sgl, sg, n_elem, i) |
1674 | buflen += sg->length; | |
2432697b | 1675 | |
87260216 | 1676 | ata_sg_init(qc, sgl, n_elem); |
49c80429 | 1677 | qc->nbytes = buflen; |
a2a7a662 TH |
1678 | } |
1679 | ||
77853bf2 | 1680 | qc->private_data = &wait; |
a2a7a662 TH |
1681 | qc->complete_fn = ata_qc_complete_internal; |
1682 | ||
8e0e694a | 1683 | ata_qc_issue(qc); |
a2a7a662 | 1684 | |
ba6a1308 | 1685 | spin_unlock_irqrestore(ap->lock, flags); |
a2a7a662 | 1686 | |
87fbc5a0 TH |
1687 | if (!timeout) { |
1688 | if (ata_probe_timeout) | |
1689 | timeout = ata_probe_timeout * 1000; | |
1690 | else { | |
1691 | timeout = ata_internal_cmd_timeout(dev, command); | |
1692 | auto_timeout = 1; | |
1693 | } | |
1694 | } | |
2b789108 TH |
1695 | |
1696 | rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout)); | |
d95a717f TH |
1697 | |
1698 | ata_port_flush_task(ap); | |
41ade50c | 1699 | |
d95a717f | 1700 | if (!rc) { |
ba6a1308 | 1701 | spin_lock_irqsave(ap->lock, flags); |
a2a7a662 TH |
1702 | |
1703 | /* We're racing with irq here. If we lose, the | |
1704 | * following test prevents us from completing the qc | |
d95a717f TH |
1705 | * twice. If we win, the port is frozen and will be |
1706 | * cleaned up by ->post_internal_cmd(). | |
a2a7a662 | 1707 | */ |
77853bf2 | 1708 | if (qc->flags & ATA_QCFLAG_ACTIVE) { |
d95a717f TH |
1709 | qc->err_mask |= AC_ERR_TIMEOUT; |
1710 | ||
1711 | if (ap->ops->error_handler) | |
1712 | ata_port_freeze(ap); | |
1713 | else | |
1714 | ata_qc_complete(qc); | |
f15a1daf | 1715 | |
0dd4b21f BP |
1716 | if (ata_msg_warn(ap)) |
1717 | ata_dev_printk(dev, KERN_WARNING, | |
88574551 | 1718 | "qc timeout (cmd 0x%x)\n", command); |
a2a7a662 TH |
1719 | } |
1720 | ||
ba6a1308 | 1721 | spin_unlock_irqrestore(ap->lock, flags); |
a2a7a662 TH |
1722 | } |
1723 | ||
d95a717f TH |
1724 | /* do post_internal_cmd */ |
1725 | if (ap->ops->post_internal_cmd) | |
1726 | ap->ops->post_internal_cmd(qc); | |
1727 | ||
a51d644a TH |
1728 | /* perform minimal error analysis */ |
1729 | if (qc->flags & ATA_QCFLAG_FAILED) { | |
1730 | if (qc->result_tf.command & (ATA_ERR | ATA_DF)) | |
1731 | qc->err_mask |= AC_ERR_DEV; | |
1732 | ||
1733 | if (!qc->err_mask) | |
1734 | qc->err_mask |= AC_ERR_OTHER; | |
1735 | ||
1736 | if (qc->err_mask & ~AC_ERR_OTHER) | |
1737 | qc->err_mask &= ~AC_ERR_OTHER; | |
d95a717f TH |
1738 | } |
1739 | ||
15869303 | 1740 | /* finish up */ |
ba6a1308 | 1741 | spin_lock_irqsave(ap->lock, flags); |
15869303 | 1742 | |
e61e0672 | 1743 | *tf = qc->result_tf; |
77853bf2 TH |
1744 | err_mask = qc->err_mask; |
1745 | ||
1746 | ata_qc_free(qc); | |
9af5c9c9 TH |
1747 | link->active_tag = preempted_tag; |
1748 | link->sactive = preempted_sactive; | |
dedaf2b0 | 1749 | ap->qc_active = preempted_qc_active; |
da917d69 | 1750 | ap->nr_active_links = preempted_nr_active_links; |
77853bf2 | 1751 | |
1f7dd3e9 TH |
1752 | /* XXX - Some LLDDs (sata_mv) disable port on command failure. |
1753 | * Until those drivers are fixed, we detect the condition | |
1754 | * here, fail the command with AC_ERR_SYSTEM and reenable the | |
1755 | * port. | |
1756 | * | |
1757 | * Note that this doesn't change any behavior as internal | |
1758 | * command failure results in disabling the device in the | |
1759 | * higher layer for LLDDs without new reset/EH callbacks. | |
1760 | * | |
1761 | * Kill the following code as soon as those drivers are fixed. | |
1762 | */ | |
198e0fed | 1763 | if (ap->flags & ATA_FLAG_DISABLED) { |
1f7dd3e9 TH |
1764 | err_mask |= AC_ERR_SYSTEM; |
1765 | ata_port_probe(ap); | |
1766 | } | |
1767 | ||
ba6a1308 | 1768 | spin_unlock_irqrestore(ap->lock, flags); |
15869303 | 1769 | |
87fbc5a0 TH |
1770 | if ((err_mask & AC_ERR_TIMEOUT) && auto_timeout) |
1771 | ata_internal_cmd_timed_out(dev, command); | |
1772 | ||
77853bf2 | 1773 | return err_mask; |
a2a7a662 TH |
1774 | } |
1775 | ||
2432697b | 1776 | /** |
33480a0e | 1777 | * ata_exec_internal - execute libata internal command |
2432697b TH |
1778 | * @dev: Device to which the command is sent |
1779 | * @tf: Taskfile registers for the command and the result | |
1780 | * @cdb: CDB for packet command | |
1781 | * @dma_dir: Data tranfer direction of the command | |
1782 | * @buf: Data buffer of the command | |
1783 | * @buflen: Length of data buffer | |
2b789108 | 1784 | * @timeout: Timeout in msecs (0 for default) |
2432697b TH |
1785 | * |
1786 | * Wrapper around ata_exec_internal_sg() which takes simple | |
1787 | * buffer instead of sg list. | |
1788 | * | |
1789 | * LOCKING: | |
1790 | * None. Should be called with kernel context, might sleep. | |
1791 | * | |
1792 | * RETURNS: | |
1793 | * Zero on success, AC_ERR_* mask on failure | |
1794 | */ | |
1795 | unsigned ata_exec_internal(struct ata_device *dev, | |
1796 | struct ata_taskfile *tf, const u8 *cdb, | |
2b789108 TH |
1797 | int dma_dir, void *buf, unsigned int buflen, |
1798 | unsigned long timeout) | |
2432697b | 1799 | { |
33480a0e TH |
1800 | struct scatterlist *psg = NULL, sg; |
1801 | unsigned int n_elem = 0; | |
2432697b | 1802 | |
33480a0e TH |
1803 | if (dma_dir != DMA_NONE) { |
1804 | WARN_ON(!buf); | |
1805 | sg_init_one(&sg, buf, buflen); | |
1806 | psg = &sg; | |
1807 | n_elem++; | |
1808 | } | |
2432697b | 1809 | |
2b789108 TH |
1810 | return ata_exec_internal_sg(dev, tf, cdb, dma_dir, psg, n_elem, |
1811 | timeout); | |
2432697b TH |
1812 | } |
1813 | ||
977e6b9f TH |
1814 | /** |
1815 | * ata_do_simple_cmd - execute simple internal command | |
1816 | * @dev: Device to which the command is sent | |
1817 | * @cmd: Opcode to execute | |
1818 | * | |
1819 | * Execute a 'simple' command, that only consists of the opcode | |
1820 | * 'cmd' itself, without filling any other registers | |
1821 | * | |
1822 | * LOCKING: | |
1823 | * Kernel thread context (may sleep). | |
1824 | * | |
1825 | * RETURNS: | |
1826 | * Zero on success, AC_ERR_* mask on failure | |
e58eb583 | 1827 | */ |
77b08fb5 | 1828 | unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd) |
e58eb583 TH |
1829 | { |
1830 | struct ata_taskfile tf; | |
e58eb583 TH |
1831 | |
1832 | ata_tf_init(dev, &tf); | |
1833 | ||
1834 | tf.command = cmd; | |
1835 | tf.flags |= ATA_TFLAG_DEVICE; | |
1836 | tf.protocol = ATA_PROT_NODATA; | |
1837 | ||
2b789108 | 1838 | return ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); |
e58eb583 TH |
1839 | } |
1840 | ||
1bc4ccff AC |
1841 | /** |
1842 | * ata_pio_need_iordy - check if iordy needed | |
1843 | * @adev: ATA device | |
1844 | * | |
1845 | * Check if the current speed of the device requires IORDY. Used | |
1846 | * by various controllers for chip configuration. | |
1847 | */ | |
a617c09f | 1848 | |
1bc4ccff AC |
1849 | unsigned int ata_pio_need_iordy(const struct ata_device *adev) |
1850 | { | |
432729f0 AC |
1851 | /* Controller doesn't support IORDY. Probably a pointless check |
1852 | as the caller should know this */ | |
9af5c9c9 | 1853 | if (adev->link->ap->flags & ATA_FLAG_NO_IORDY) |
1bc4ccff | 1854 | return 0; |
432729f0 AC |
1855 | /* PIO3 and higher it is mandatory */ |
1856 | if (adev->pio_mode > XFER_PIO_2) | |
1857 | return 1; | |
1858 | /* We turn it on when possible */ | |
1859 | if (ata_id_has_iordy(adev->id)) | |
1bc4ccff | 1860 | return 1; |
432729f0 AC |
1861 | return 0; |
1862 | } | |
2e9edbf8 | 1863 | |
432729f0 AC |
1864 | /** |
1865 | * ata_pio_mask_no_iordy - Return the non IORDY mask | |
1866 | * @adev: ATA device | |
1867 | * | |
1868 | * Compute the highest mode possible if we are not using iordy. Return | |
1869 | * -1 if no iordy mode is available. | |
1870 | */ | |
a617c09f | 1871 | |
432729f0 AC |
1872 | static u32 ata_pio_mask_no_iordy(const struct ata_device *adev) |
1873 | { | |
1bc4ccff | 1874 | /* If we have no drive specific rule, then PIO 2 is non IORDY */ |
1bc4ccff | 1875 | if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */ |
432729f0 | 1876 | u16 pio = adev->id[ATA_ID_EIDE_PIO]; |
1bc4ccff AC |
1877 | /* Is the speed faster than the drive allows non IORDY ? */ |
1878 | if (pio) { | |
1879 | /* This is cycle times not frequency - watch the logic! */ | |
1880 | if (pio > 240) /* PIO2 is 240nS per cycle */ | |
432729f0 AC |
1881 | return 3 << ATA_SHIFT_PIO; |
1882 | return 7 << ATA_SHIFT_PIO; | |
1bc4ccff AC |
1883 | } |
1884 | } | |
432729f0 | 1885 | return 3 << ATA_SHIFT_PIO; |
1bc4ccff AC |
1886 | } |
1887 | ||
1da177e4 | 1888 | /** |
49016aca | 1889 | * ata_dev_read_id - Read ID data from the specified device |
49016aca TH |
1890 | * @dev: target device |
1891 | * @p_class: pointer to class of the target device (may be changed) | |
bff04647 | 1892 | * @flags: ATA_READID_* flags |
fe635c7e | 1893 | * @id: buffer to read IDENTIFY data into |
1da177e4 | 1894 | * |
49016aca TH |
1895 | * Read ID data from the specified device. ATA_CMD_ID_ATA is |
1896 | * performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI | |
aec5c3c1 TH |
1897 | * devices. This function also issues ATA_CMD_INIT_DEV_PARAMS |
1898 | * for pre-ATA4 drives. | |
1da177e4 | 1899 | * |
50a99018 | 1900 | * FIXME: ATA_CMD_ID_ATA is optional for early drives and right |
2dcb407e | 1901 | * now we abort if we hit that case. |
50a99018 | 1902 | * |
1da177e4 | 1903 | * LOCKING: |
49016aca TH |
1904 | * Kernel thread context (may sleep) |
1905 | * | |
1906 | * RETURNS: | |
1907 | * 0 on success, -errno otherwise. | |
1da177e4 | 1908 | */ |
a9beec95 | 1909 | int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, |
bff04647 | 1910 | unsigned int flags, u16 *id) |
1da177e4 | 1911 | { |
9af5c9c9 | 1912 | struct ata_port *ap = dev->link->ap; |
49016aca | 1913 | unsigned int class = *p_class; |
a0123703 | 1914 | struct ata_taskfile tf; |
49016aca TH |
1915 | unsigned int err_mask = 0; |
1916 | const char *reason; | |
54936f8b | 1917 | int may_fallback = 1, tried_spinup = 0; |
49016aca | 1918 | int rc; |
1da177e4 | 1919 | |
0dd4b21f | 1920 | if (ata_msg_ctl(ap)) |
7f5e4e8d | 1921 | ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__); |
1da177e4 | 1922 | |
49016aca | 1923 | retry: |
3373efd8 | 1924 | ata_tf_init(dev, &tf); |
a0123703 | 1925 | |
49016aca TH |
1926 | switch (class) { |
1927 | case ATA_DEV_ATA: | |
a0123703 | 1928 | tf.command = ATA_CMD_ID_ATA; |
49016aca TH |
1929 | break; |
1930 | case ATA_DEV_ATAPI: | |
a0123703 | 1931 | tf.command = ATA_CMD_ID_ATAPI; |
49016aca TH |
1932 | break; |
1933 | default: | |
1934 | rc = -ENODEV; | |
1935 | reason = "unsupported class"; | |
1936 | goto err_out; | |
1da177e4 LT |
1937 | } |
1938 | ||
a0123703 | 1939 | tf.protocol = ATA_PROT_PIO; |
81afe893 TH |
1940 | |
1941 | /* Some devices choke if TF registers contain garbage. Make | |
1942 | * sure those are properly initialized. | |
1943 | */ | |
1944 | tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; | |
1945 | ||
1946 | /* Device presence detection is unreliable on some | |
1947 | * controllers. Always poll IDENTIFY if available. | |
1948 | */ | |
1949 | tf.flags |= ATA_TFLAG_POLLING; | |
1da177e4 | 1950 | |
3373efd8 | 1951 | err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, |
2b789108 | 1952 | id, sizeof(id[0]) * ATA_ID_WORDS, 0); |
a0123703 | 1953 | if (err_mask) { |
800b3996 | 1954 | if (err_mask & AC_ERR_NODEV_HINT) { |
1ffc151f TH |
1955 | ata_dev_printk(dev, KERN_DEBUG, |
1956 | "NODEV after polling detection\n"); | |
55a8e2c8 TH |
1957 | return -ENOENT; |
1958 | } | |
1959 | ||
1ffc151f TH |
1960 | if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) { |
1961 | /* Device or controller might have reported | |
1962 | * the wrong device class. Give a shot at the | |
1963 | * other IDENTIFY if the current one is | |
1964 | * aborted by the device. | |
1965 | */ | |
1966 | if (may_fallback) { | |
1967 | may_fallback = 0; | |
1968 | ||
1969 | if (class == ATA_DEV_ATA) | |
1970 | class = ATA_DEV_ATAPI; | |
1971 | else | |
1972 | class = ATA_DEV_ATA; | |
1973 | goto retry; | |
1974 | } | |
1975 | ||
1976 | /* Control reaches here iff the device aborted | |
1977 | * both flavors of IDENTIFYs which happens | |
1978 | * sometimes with phantom devices. | |
1979 | */ | |
1980 | ata_dev_printk(dev, KERN_DEBUG, | |
1981 | "both IDENTIFYs aborted, assuming NODEV\n"); | |
1982 | return -ENOENT; | |
54936f8b TH |
1983 | } |
1984 | ||
49016aca TH |
1985 | rc = -EIO; |
1986 | reason = "I/O error"; | |
1da177e4 LT |
1987 | goto err_out; |
1988 | } | |
1989 | ||
54936f8b TH |
1990 | /* Falling back doesn't make sense if ID data was read |
1991 | * successfully at least once. | |
1992 | */ | |
1993 | may_fallback = 0; | |
1994 | ||
49016aca | 1995 | swap_buf_le16(id, ATA_ID_WORDS); |
1da177e4 | 1996 | |
49016aca | 1997 | /* sanity check */ |
a4f5749b | 1998 | rc = -EINVAL; |
6070068b | 1999 | reason = "device reports invalid type"; |
a4f5749b TH |
2000 | |
2001 | if (class == ATA_DEV_ATA) { | |
2002 | if (!ata_id_is_ata(id) && !ata_id_is_cfa(id)) | |
2003 | goto err_out; | |
2004 | } else { | |
2005 | if (ata_id_is_ata(id)) | |
2006 | goto err_out; | |
49016aca TH |
2007 | } |
2008 | ||
169439c2 ML |
2009 | if (!tried_spinup && (id[2] == 0x37c8 || id[2] == 0x738c)) { |
2010 | tried_spinup = 1; | |
2011 | /* | |
2012 | * Drive powered-up in standby mode, and requires a specific | |
2013 | * SET_FEATURES spin-up subcommand before it will accept | |
2014 | * anything other than the original IDENTIFY command. | |
2015 | */ | |
218f3d30 | 2016 | err_mask = ata_dev_set_feature(dev, SETFEATURES_SPINUP, 0); |
fb0582f9 | 2017 | if (err_mask && id[2] != 0x738c) { |
169439c2 ML |
2018 | rc = -EIO; |
2019 | reason = "SPINUP failed"; | |
2020 | goto err_out; | |
2021 | } | |
2022 | /* | |
2023 | * If the drive initially returned incomplete IDENTIFY info, | |
2024 | * we now must reissue the IDENTIFY command. | |
2025 | */ | |
2026 | if (id[2] == 0x37c8) | |
2027 | goto retry; | |
2028 | } | |
2029 | ||
bff04647 | 2030 | if ((flags & ATA_READID_POSTRESET) && class == ATA_DEV_ATA) { |
49016aca TH |
2031 | /* |
2032 | * The exact sequence expected by certain pre-ATA4 drives is: | |
2033 | * SRST RESET | |
50a99018 AC |
2034 | * IDENTIFY (optional in early ATA) |
2035 | * INITIALIZE DEVICE PARAMETERS (later IDE and ATA) | |
49016aca TH |
2036 | * anything else.. |
2037 | * Some drives were very specific about that exact sequence. | |
50a99018 AC |
2038 | * |
2039 | * Note that ATA4 says lba is mandatory so the second check | |
2040 | * shoud never trigger. | |
49016aca TH |
2041 | */ |
2042 | if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) { | |
3373efd8 | 2043 | err_mask = ata_dev_init_params(dev, id[3], id[6]); |
49016aca TH |
2044 | if (err_mask) { |
2045 | rc = -EIO; | |
2046 | reason = "INIT_DEV_PARAMS failed"; | |
2047 | goto err_out; | |
2048 | } | |
2049 | ||
2050 | /* current CHS translation info (id[53-58]) might be | |
2051 | * changed. reread the identify device info. | |
2052 | */ | |
bff04647 | 2053 | flags &= ~ATA_READID_POSTRESET; |
49016aca TH |
2054 | goto retry; |
2055 | } | |
2056 | } | |
2057 | ||
2058 | *p_class = class; | |
fe635c7e | 2059 | |
49016aca TH |
2060 | return 0; |
2061 | ||
2062 | err_out: | |
88574551 | 2063 | if (ata_msg_warn(ap)) |
0dd4b21f | 2064 | ata_dev_printk(dev, KERN_WARNING, "failed to IDENTIFY " |
88574551 | 2065 | "(%s, err_mask=0x%x)\n", reason, err_mask); |
49016aca TH |
2066 | return rc; |
2067 | } | |
2068 | ||
3373efd8 | 2069 | static inline u8 ata_dev_knobble(struct ata_device *dev) |
4b2f3ede | 2070 | { |
9af5c9c9 TH |
2071 | struct ata_port *ap = dev->link->ap; |
2072 | return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); | |
4b2f3ede TH |
2073 | } |
2074 | ||
a6e6ce8e TH |
2075 | static void ata_dev_config_ncq(struct ata_device *dev, |
2076 | char *desc, size_t desc_sz) | |
2077 | { | |
9af5c9c9 | 2078 | struct ata_port *ap = dev->link->ap; |
a6e6ce8e TH |
2079 | int hdepth = 0, ddepth = ata_id_queue_depth(dev->id); |
2080 | ||
2081 | if (!ata_id_has_ncq(dev->id)) { | |
2082 | desc[0] = '\0'; | |
2083 | return; | |
2084 | } | |
75683fe7 | 2085 | if (dev->horkage & ATA_HORKAGE_NONCQ) { |
6919a0a6 AC |
2086 | snprintf(desc, desc_sz, "NCQ (not used)"); |
2087 | return; | |
2088 | } | |
a6e6ce8e | 2089 | if (ap->flags & ATA_FLAG_NCQ) { |
cca3974e | 2090 | hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE - 1); |
a6e6ce8e TH |
2091 | dev->flags |= ATA_DFLAG_NCQ; |
2092 | } | |
2093 | ||
2094 | if (hdepth >= ddepth) | |
2095 | snprintf(desc, desc_sz, "NCQ (depth %d)", ddepth); | |
2096 | else | |
2097 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth); | |
2098 | } | |
2099 | ||
49016aca | 2100 | /** |
ffeae418 | 2101 | * ata_dev_configure - Configure the specified ATA/ATAPI device |
ffeae418 TH |
2102 | * @dev: Target device to configure |
2103 | * | |
2104 | * Configure @dev according to @dev->id. Generic and low-level | |
2105 | * driver specific fixups are also applied. | |
49016aca TH |
2106 | * |
2107 | * LOCKING: | |
ffeae418 TH |
2108 | * Kernel thread context (may sleep) |
2109 | * | |
2110 | * RETURNS: | |
2111 | * 0 on success, -errno otherwise | |
49016aca | 2112 | */ |
efdaedc4 | 2113 | int ata_dev_configure(struct ata_device *dev) |
49016aca | 2114 | { |
9af5c9c9 TH |
2115 | struct ata_port *ap = dev->link->ap; |
2116 | struct ata_eh_context *ehc = &dev->link->eh_context; | |
6746544c | 2117 | int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; |
1148c3a7 | 2118 | const u16 *id = dev->id; |
7dc951ae | 2119 | unsigned long xfer_mask; |
b352e57d | 2120 | char revbuf[7]; /* XYZ-99\0 */ |
3f64f565 EM |
2121 | char fwrevbuf[ATA_ID_FW_REV_LEN+1]; |
2122 | char modelbuf[ATA_ID_PROD_LEN+1]; | |
e6d902a3 | 2123 | int rc; |
49016aca | 2124 | |
0dd4b21f | 2125 | if (!ata_dev_enabled(dev) && ata_msg_info(ap)) { |
44877b4e | 2126 | ata_dev_printk(dev, KERN_INFO, "%s: ENTER/EXIT -- nodev\n", |
7f5e4e8d | 2127 | __func__); |
ffeae418 | 2128 | return 0; |
49016aca TH |
2129 | } |
2130 | ||
0dd4b21f | 2131 | if (ata_msg_probe(ap)) |
7f5e4e8d | 2132 | ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__); |
1da177e4 | 2133 | |
75683fe7 TH |
2134 | /* set horkage */ |
2135 | dev->horkage |= ata_dev_blacklisted(dev); | |
33267325 | 2136 | ata_force_horkage(dev); |
75683fe7 | 2137 | |
50af2fa1 TH |
2138 | if (dev->horkage & ATA_HORKAGE_DISABLE) { |
2139 | ata_dev_printk(dev, KERN_INFO, | |
2140 | "unsupported device, disabling\n"); | |
2141 | ata_dev_disable(dev); | |
2142 | return 0; | |
2143 | } | |
2144 | ||
6746544c TH |
2145 | /* let ACPI work its magic */ |
2146 | rc = ata_acpi_on_devcfg(dev); | |
2147 | if (rc) | |
2148 | return rc; | |
08573a86 | 2149 | |
05027adc TH |
2150 | /* massage HPA, do it early as it might change IDENTIFY data */ |
2151 | rc = ata_hpa_resize(dev); | |
2152 | if (rc) | |
2153 | return rc; | |
2154 | ||
c39f5ebe | 2155 | /* print device capabilities */ |
0dd4b21f | 2156 | if (ata_msg_probe(ap)) |
88574551 TH |
2157 | ata_dev_printk(dev, KERN_DEBUG, |
2158 | "%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x " | |
2159 | "85:%04x 86:%04x 87:%04x 88:%04x\n", | |
7f5e4e8d | 2160 | __func__, |
f15a1daf TH |
2161 | id[49], id[82], id[83], id[84], |
2162 | id[85], id[86], id[87], id[88]); | |
c39f5ebe | 2163 | |
208a9933 | 2164 | /* initialize to-be-configured parameters */ |
ea1dd4e1 | 2165 | dev->flags &= ~ATA_DFLAG_CFG_MASK; |
208a9933 TH |
2166 | dev->max_sectors = 0; |
2167 | dev->cdb_len = 0; | |
2168 | dev->n_sectors = 0; | |
2169 | dev->cylinders = 0; | |
2170 | dev->heads = 0; | |
2171 | dev->sectors = 0; | |
2172 | ||
1da177e4 LT |
2173 | /* |
2174 | * common ATA, ATAPI feature tests | |
2175 | */ | |
2176 | ||
ff8854b2 | 2177 | /* find max transfer mode; for printk only */ |
1148c3a7 | 2178 | xfer_mask = ata_id_xfermask(id); |
1da177e4 | 2179 | |
0dd4b21f BP |
2180 | if (ata_msg_probe(ap)) |
2181 | ata_dump_id(id); | |
1da177e4 | 2182 | |
ef143d57 AL |
2183 | /* SCSI only uses 4-char revisions, dump full 8 chars from ATA */ |
2184 | ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV, | |
2185 | sizeof(fwrevbuf)); | |
2186 | ||
2187 | ata_id_c_string(dev->id, modelbuf, ATA_ID_PROD, | |
2188 | sizeof(modelbuf)); | |
2189 | ||
1da177e4 LT |
2190 | /* ATA-specific feature tests */ |
2191 | if (dev->class == ATA_DEV_ATA) { | |
b352e57d AC |
2192 | if (ata_id_is_cfa(id)) { |
2193 | if (id[162] & 1) /* CPRM may make this media unusable */ | |
44877b4e TH |
2194 | ata_dev_printk(dev, KERN_WARNING, |
2195 | "supports DRM functions and may " | |
2196 | "not be fully accessable.\n"); | |
b352e57d | 2197 | snprintf(revbuf, 7, "CFA"); |
ae8d4ee7 | 2198 | } else { |
2dcb407e | 2199 | snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id)); |
ae8d4ee7 AC |
2200 | /* Warn the user if the device has TPM extensions */ |
2201 | if (ata_id_has_tpm(id)) | |
2202 | ata_dev_printk(dev, KERN_WARNING, | |
2203 | "supports DRM functions and may " | |
2204 | "not be fully accessable.\n"); | |
2205 | } | |
b352e57d | 2206 | |
1148c3a7 | 2207 | dev->n_sectors = ata_id_n_sectors(id); |
2940740b | 2208 | |
3f64f565 EM |
2209 | if (dev->id[59] & 0x100) |
2210 | dev->multi_count = dev->id[59] & 0xff; | |
2211 | ||
1148c3a7 | 2212 | if (ata_id_has_lba(id)) { |
4c2d721a | 2213 | const char *lba_desc; |
a6e6ce8e | 2214 | char ncq_desc[20]; |
8bf62ece | 2215 | |
4c2d721a TH |
2216 | lba_desc = "LBA"; |
2217 | dev->flags |= ATA_DFLAG_LBA; | |
1148c3a7 | 2218 | if (ata_id_has_lba48(id)) { |
8bf62ece | 2219 | dev->flags |= ATA_DFLAG_LBA48; |
4c2d721a | 2220 | lba_desc = "LBA48"; |
6fc49adb TH |
2221 | |
2222 | if (dev->n_sectors >= (1UL << 28) && | |
2223 | ata_id_has_flush_ext(id)) | |
2224 | dev->flags |= ATA_DFLAG_FLUSH_EXT; | |
4c2d721a | 2225 | } |
8bf62ece | 2226 | |
a6e6ce8e TH |
2227 | /* config NCQ */ |
2228 | ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc)); | |
2229 | ||
8bf62ece | 2230 | /* print device info to dmesg */ |
3f64f565 EM |
2231 | if (ata_msg_drv(ap) && print_info) { |
2232 | ata_dev_printk(dev, KERN_INFO, | |
2233 | "%s: %s, %s, max %s\n", | |
2234 | revbuf, modelbuf, fwrevbuf, | |
2235 | ata_mode_string(xfer_mask)); | |
2236 | ata_dev_printk(dev, KERN_INFO, | |
2237 | "%Lu sectors, multi %u: %s %s\n", | |
f15a1daf | 2238 | (unsigned long long)dev->n_sectors, |
3f64f565 EM |
2239 | dev->multi_count, lba_desc, ncq_desc); |
2240 | } | |
ffeae418 | 2241 | } else { |
8bf62ece AL |
2242 | /* CHS */ |
2243 | ||
2244 | /* Default translation */ | |
1148c3a7 TH |
2245 | dev->cylinders = id[1]; |
2246 | dev->heads = id[3]; | |
2247 | dev->sectors = id[6]; | |
8bf62ece | 2248 | |
1148c3a7 | 2249 | if (ata_id_current_chs_valid(id)) { |
8bf62ece | 2250 | /* Current CHS translation is valid. */ |
1148c3a7 TH |
2251 | dev->cylinders = id[54]; |
2252 | dev->heads = id[55]; | |
2253 | dev->sectors = id[56]; | |
8bf62ece AL |
2254 | } |
2255 | ||
2256 | /* print device info to dmesg */ | |
3f64f565 | 2257 | if (ata_msg_drv(ap) && print_info) { |
88574551 | 2258 | ata_dev_printk(dev, KERN_INFO, |
3f64f565 EM |
2259 | "%s: %s, %s, max %s\n", |
2260 | revbuf, modelbuf, fwrevbuf, | |
2261 | ata_mode_string(xfer_mask)); | |
a84471fe | 2262 | ata_dev_printk(dev, KERN_INFO, |
3f64f565 EM |
2263 | "%Lu sectors, multi %u, CHS %u/%u/%u\n", |
2264 | (unsigned long long)dev->n_sectors, | |
2265 | dev->multi_count, dev->cylinders, | |
2266 | dev->heads, dev->sectors); | |
2267 | } | |
07f6f7d0 AL |
2268 | } |
2269 | ||
6e7846e9 | 2270 | dev->cdb_len = 16; |
1da177e4 LT |
2271 | } |
2272 | ||
2273 | /* ATAPI-specific feature tests */ | |
2c13b7ce | 2274 | else if (dev->class == ATA_DEV_ATAPI) { |
854c73a2 TH |
2275 | const char *cdb_intr_string = ""; |
2276 | const char *atapi_an_string = ""; | |
91163006 | 2277 | const char *dma_dir_string = ""; |
7d77b247 | 2278 | u32 sntf; |
08a556db | 2279 | |
1148c3a7 | 2280 | rc = atapi_cdb_len(id); |
1da177e4 | 2281 | if ((rc < 12) || (rc > ATAPI_CDB_LEN)) { |
0dd4b21f | 2282 | if (ata_msg_warn(ap)) |
88574551 TH |
2283 | ata_dev_printk(dev, KERN_WARNING, |
2284 | "unsupported CDB len\n"); | |
ffeae418 | 2285 | rc = -EINVAL; |
1da177e4 LT |
2286 | goto err_out_nosup; |
2287 | } | |
6e7846e9 | 2288 | dev->cdb_len = (unsigned int) rc; |
1da177e4 | 2289 | |
7d77b247 TH |
2290 | /* Enable ATAPI AN if both the host and device have |
2291 | * the support. If PMP is attached, SNTF is required | |
2292 | * to enable ATAPI AN to discern between PHY status | |
2293 | * changed notifications and ATAPI ANs. | |
9f45cbd3 | 2294 | */ |
7d77b247 | 2295 | if ((ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) && |
071f44b1 | 2296 | (!sata_pmp_attached(ap) || |
7d77b247 | 2297 | sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) { |
854c73a2 TH |
2298 | unsigned int err_mask; |
2299 | ||
9f45cbd3 | 2300 | /* issue SET feature command to turn this on */ |
218f3d30 JG |
2301 | err_mask = ata_dev_set_feature(dev, |
2302 | SETFEATURES_SATA_ENABLE, SATA_AN); | |
854c73a2 | 2303 | if (err_mask) |
9f45cbd3 | 2304 | ata_dev_printk(dev, KERN_ERR, |
854c73a2 TH |
2305 | "failed to enable ATAPI AN " |
2306 | "(err_mask=0x%x)\n", err_mask); | |
2307 | else { | |
9f45cbd3 | 2308 | dev->flags |= ATA_DFLAG_AN; |
854c73a2 TH |
2309 | atapi_an_string = ", ATAPI AN"; |
2310 | } | |
9f45cbd3 KCA |
2311 | } |
2312 | ||
08a556db | 2313 | if (ata_id_cdb_intr(dev->id)) { |
312f7da2 | 2314 | dev->flags |= ATA_DFLAG_CDB_INTR; |
08a556db AL |
2315 | cdb_intr_string = ", CDB intr"; |
2316 | } | |
312f7da2 | 2317 | |
91163006 TH |
2318 | if (atapi_dmadir || atapi_id_dmadir(dev->id)) { |
2319 | dev->flags |= ATA_DFLAG_DMADIR; | |
2320 | dma_dir_string = ", DMADIR"; | |
2321 | } | |
2322 | ||
1da177e4 | 2323 | /* print device info to dmesg */ |
5afc8142 | 2324 | if (ata_msg_drv(ap) && print_info) |
ef143d57 | 2325 | ata_dev_printk(dev, KERN_INFO, |
91163006 | 2326 | "ATAPI: %s, %s, max %s%s%s%s\n", |
ef143d57 | 2327 | modelbuf, fwrevbuf, |
12436c30 | 2328 | ata_mode_string(xfer_mask), |
91163006 TH |
2329 | cdb_intr_string, atapi_an_string, |
2330 | dma_dir_string); | |
1da177e4 LT |
2331 | } |
2332 | ||
914ed354 TH |
2333 | /* determine max_sectors */ |
2334 | dev->max_sectors = ATA_MAX_SECTORS; | |
2335 | if (dev->flags & ATA_DFLAG_LBA48) | |
2336 | dev->max_sectors = ATA_MAX_SECTORS_LBA48; | |
2337 | ||
ca77329f KCA |
2338 | if (!(dev->horkage & ATA_HORKAGE_IPM)) { |
2339 | if (ata_id_has_hipm(dev->id)) | |
2340 | dev->flags |= ATA_DFLAG_HIPM; | |
2341 | if (ata_id_has_dipm(dev->id)) | |
2342 | dev->flags |= ATA_DFLAG_DIPM; | |
2343 | } | |
2344 | ||
c5038fc0 AC |
2345 | /* Limit PATA drive on SATA cable bridge transfers to udma5, |
2346 | 200 sectors */ | |
3373efd8 | 2347 | if (ata_dev_knobble(dev)) { |
5afc8142 | 2348 | if (ata_msg_drv(ap) && print_info) |
f15a1daf TH |
2349 | ata_dev_printk(dev, KERN_INFO, |
2350 | "applying bridge limits\n"); | |
5a529139 | 2351 | dev->udma_mask &= ATA_UDMA5; |
4b2f3ede TH |
2352 | dev->max_sectors = ATA_MAX_SECTORS; |
2353 | } | |
2354 | ||
f8d8e579 | 2355 | if ((dev->class == ATA_DEV_ATAPI) && |
f442cd86 | 2356 | (atapi_command_packet_set(id) == TYPE_TAPE)) { |
f8d8e579 | 2357 | dev->max_sectors = ATA_MAX_SECTORS_TAPE; |
f442cd86 AL |
2358 | dev->horkage |= ATA_HORKAGE_STUCK_ERR; |
2359 | } | |
f8d8e579 | 2360 | |
75683fe7 | 2361 | if (dev->horkage & ATA_HORKAGE_MAX_SEC_128) |
03ec52de TH |
2362 | dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, |
2363 | dev->max_sectors); | |
18d6e9d5 | 2364 | |
ca77329f KCA |
2365 | if (ata_dev_blacklisted(dev) & ATA_HORKAGE_IPM) { |
2366 | dev->horkage |= ATA_HORKAGE_IPM; | |
2367 | ||
2368 | /* reset link pm_policy for this port to no pm */ | |
2369 | ap->pm_policy = MAX_PERFORMANCE; | |
2370 | } | |
2371 | ||
4b2f3ede | 2372 | if (ap->ops->dev_config) |
cd0d3bbc | 2373 | ap->ops->dev_config(dev); |
4b2f3ede | 2374 | |
c5038fc0 AC |
2375 | if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) { |
2376 | /* Let the user know. We don't want to disallow opens for | |
2377 | rescue purposes, or in case the vendor is just a blithering | |
2378 | idiot. Do this after the dev_config call as some controllers | |
2379 | with buggy firmware may want to avoid reporting false device | |
2380 | bugs */ | |
2381 | ||
2382 | if (print_info) { | |
2383 | ata_dev_printk(dev, KERN_WARNING, | |
2384 | "Drive reports diagnostics failure. This may indicate a drive\n"); | |
2385 | ata_dev_printk(dev, KERN_WARNING, | |
2386 | "fault or invalid emulation. Contact drive vendor for information.\n"); | |
2387 | } | |
2388 | } | |
2389 | ||
ffeae418 | 2390 | return 0; |
1da177e4 LT |
2391 | |
2392 | err_out_nosup: | |
0dd4b21f | 2393 | if (ata_msg_probe(ap)) |
88574551 | 2394 | ata_dev_printk(dev, KERN_DEBUG, |
7f5e4e8d | 2395 | "%s: EXIT, err\n", __func__); |
ffeae418 | 2396 | return rc; |
1da177e4 LT |
2397 | } |
2398 | ||
be0d18df | 2399 | /** |
2e41e8e6 | 2400 | * ata_cable_40wire - return 40 wire cable type |
be0d18df AC |
2401 | * @ap: port |
2402 | * | |
2e41e8e6 | 2403 | * Helper method for drivers which want to hardwire 40 wire cable |
be0d18df AC |
2404 | * detection. |
2405 | */ | |
2406 | ||
2407 | int ata_cable_40wire(struct ata_port *ap) | |
2408 | { | |
2409 | return ATA_CBL_PATA40; | |
2410 | } | |
2411 | ||
2412 | /** | |
2e41e8e6 | 2413 | * ata_cable_80wire - return 80 wire cable type |
be0d18df AC |
2414 | * @ap: port |
2415 | * | |
2e41e8e6 | 2416 | * Helper method for drivers which want to hardwire 80 wire cable |
be0d18df AC |
2417 | * detection. |
2418 | */ | |
2419 | ||
2420 | int ata_cable_80wire(struct ata_port *ap) | |
2421 | { | |
2422 | return ATA_CBL_PATA80; | |
2423 | } | |
2424 | ||
2425 | /** | |
2426 | * ata_cable_unknown - return unknown PATA cable. | |
2427 | * @ap: port | |
2428 | * | |
2429 | * Helper method for drivers which have no PATA cable detection. | |
2430 | */ | |
2431 | ||
2432 | int ata_cable_unknown(struct ata_port *ap) | |
2433 | { | |
2434 | return ATA_CBL_PATA_UNK; | |
2435 | } | |
2436 | ||
c88f90c3 TH |
2437 | /** |
2438 | * ata_cable_ignore - return ignored PATA cable. | |
2439 | * @ap: port | |
2440 | * | |
2441 | * Helper method for drivers which don't use cable type to limit | |
2442 | * transfer mode. | |
2443 | */ | |
2444 | int ata_cable_ignore(struct ata_port *ap) | |
2445 | { | |
2446 | return ATA_CBL_PATA_IGN; | |
2447 | } | |
2448 | ||
be0d18df AC |
2449 | /** |
2450 | * ata_cable_sata - return SATA cable type | |
2451 | * @ap: port | |
2452 | * | |
2453 | * Helper method for drivers which have SATA cables | |
2454 | */ | |
2455 | ||
2456 | int ata_cable_sata(struct ata_port *ap) | |
2457 | { | |
2458 | return ATA_CBL_SATA; | |
2459 | } | |
2460 | ||
1da177e4 LT |
2461 | /** |
2462 | * ata_bus_probe - Reset and probe ATA bus | |
2463 | * @ap: Bus to probe | |
2464 | * | |
0cba632b JG |
2465 | * Master ATA bus probing function. Initiates a hardware-dependent |
2466 | * bus reset, then attempts to identify any devices found on | |
2467 | * the bus. | |
2468 | * | |
1da177e4 | 2469 | * LOCKING: |
0cba632b | 2470 | * PCI/etc. bus probe sem. |
1da177e4 LT |
2471 | * |
2472 | * RETURNS: | |
96072e69 | 2473 | * Zero on success, negative errno otherwise. |
1da177e4 LT |
2474 | */ |
2475 | ||
80289167 | 2476 | int ata_bus_probe(struct ata_port *ap) |
1da177e4 | 2477 | { |
28ca5c57 | 2478 | unsigned int classes[ATA_MAX_DEVICES]; |
14d2bac1 | 2479 | int tries[ATA_MAX_DEVICES]; |
f58229f8 | 2480 | int rc; |
e82cbdb9 | 2481 | struct ata_device *dev; |
1da177e4 | 2482 | |
28ca5c57 | 2483 | ata_port_probe(ap); |
c19ba8af | 2484 | |
f58229f8 TH |
2485 | ata_link_for_each_dev(dev, &ap->link) |
2486 | tries[dev->devno] = ATA_PROBE_MAX_TRIES; | |
14d2bac1 TH |
2487 | |
2488 | retry: | |
cdeab114 TH |
2489 | ata_link_for_each_dev(dev, &ap->link) { |
2490 | /* If we issue an SRST then an ATA drive (not ATAPI) | |
2491 | * may change configuration and be in PIO0 timing. If | |
2492 | * we do a hard reset (or are coming from power on) | |
2493 | * this is true for ATA or ATAPI. Until we've set a | |
2494 | * suitable controller mode we should not touch the | |
2495 | * bus as we may be talking too fast. | |
2496 | */ | |
2497 | dev->pio_mode = XFER_PIO_0; | |
2498 | ||
2499 | /* If the controller has a pio mode setup function | |
2500 | * then use it to set the chipset to rights. Don't | |
2501 | * touch the DMA setup as that will be dealt with when | |
2502 | * configuring devices. | |
2503 | */ | |
2504 | if (ap->ops->set_piomode) | |
2505 | ap->ops->set_piomode(ap, dev); | |
2506 | } | |
2507 | ||
2044470c | 2508 | /* reset and determine device classes */ |
52783c5d | 2509 | ap->ops->phy_reset(ap); |
2061a47a | 2510 | |
f58229f8 | 2511 | ata_link_for_each_dev(dev, &ap->link) { |
52783c5d TH |
2512 | if (!(ap->flags & ATA_FLAG_DISABLED) && |
2513 | dev->class != ATA_DEV_UNKNOWN) | |
2514 | classes[dev->devno] = dev->class; | |
2515 | else | |
2516 | classes[dev->devno] = ATA_DEV_NONE; | |
2044470c | 2517 | |
52783c5d | 2518 | dev->class = ATA_DEV_UNKNOWN; |
28ca5c57 | 2519 | } |
1da177e4 | 2520 | |
52783c5d | 2521 | ata_port_probe(ap); |
2044470c | 2522 | |
f31f0cc2 JG |
2523 | /* read IDENTIFY page and configure devices. We have to do the identify |
2524 | specific sequence bass-ackwards so that PDIAG- is released by | |
2525 | the slave device */ | |
2526 | ||
a4ba7fe2 | 2527 | ata_link_for_each_dev_reverse(dev, &ap->link) { |
f58229f8 TH |
2528 | if (tries[dev->devno]) |
2529 | dev->class = classes[dev->devno]; | |
ffeae418 | 2530 | |
14d2bac1 | 2531 | if (!ata_dev_enabled(dev)) |
ffeae418 | 2532 | continue; |
ffeae418 | 2533 | |
bff04647 TH |
2534 | rc = ata_dev_read_id(dev, &dev->class, ATA_READID_POSTRESET, |
2535 | dev->id); | |
14d2bac1 TH |
2536 | if (rc) |
2537 | goto fail; | |
f31f0cc2 JG |
2538 | } |
2539 | ||
be0d18df AC |
2540 | /* Now ask for the cable type as PDIAG- should have been released */ |
2541 | if (ap->ops->cable_detect) | |
2542 | ap->cbl = ap->ops->cable_detect(ap); | |
2543 | ||
614fe29b AC |
2544 | /* We may have SATA bridge glue hiding here irrespective of the |
2545 | reported cable types and sensed types */ | |
2546 | ata_link_for_each_dev(dev, &ap->link) { | |
2547 | if (!ata_dev_enabled(dev)) | |
2548 | continue; | |
2549 | /* SATA drives indicate we have a bridge. We don't know which | |
2550 | end of the link the bridge is which is a problem */ | |
2551 | if (ata_id_is_sata(dev->id)) | |
2552 | ap->cbl = ATA_CBL_SATA; | |
2553 | } | |
2554 | ||
f31f0cc2 JG |
2555 | /* After the identify sequence we can now set up the devices. We do |
2556 | this in the normal order so that the user doesn't get confused */ | |
2557 | ||
f58229f8 | 2558 | ata_link_for_each_dev(dev, &ap->link) { |
f31f0cc2 JG |
2559 | if (!ata_dev_enabled(dev)) |
2560 | continue; | |
14d2bac1 | 2561 | |
9af5c9c9 | 2562 | ap->link.eh_context.i.flags |= ATA_EHI_PRINTINFO; |
efdaedc4 | 2563 | rc = ata_dev_configure(dev); |
9af5c9c9 | 2564 | ap->link.eh_context.i.flags &= ~ATA_EHI_PRINTINFO; |
14d2bac1 TH |
2565 | if (rc) |
2566 | goto fail; | |
1da177e4 LT |
2567 | } |
2568 | ||
e82cbdb9 | 2569 | /* configure transfer mode */ |
0260731f | 2570 | rc = ata_set_mode(&ap->link, &dev); |
4ae72a1e | 2571 | if (rc) |
51713d35 | 2572 | goto fail; |
1da177e4 | 2573 | |
f58229f8 TH |
2574 | ata_link_for_each_dev(dev, &ap->link) |
2575 | if (ata_dev_enabled(dev)) | |
e82cbdb9 | 2576 | return 0; |
1da177e4 | 2577 | |
e82cbdb9 TH |
2578 | /* no device present, disable port */ |
2579 | ata_port_disable(ap); | |
96072e69 | 2580 | return -ENODEV; |
14d2bac1 TH |
2581 | |
2582 | fail: | |
4ae72a1e TH |
2583 | tries[dev->devno]--; |
2584 | ||
14d2bac1 TH |
2585 | switch (rc) { |
2586 | case -EINVAL: | |
4ae72a1e | 2587 | /* eeek, something went very wrong, give up */ |
14d2bac1 TH |
2588 | tries[dev->devno] = 0; |
2589 | break; | |
4ae72a1e TH |
2590 | |
2591 | case -ENODEV: | |
2592 | /* give it just one more chance */ | |
2593 | tries[dev->devno] = min(tries[dev->devno], 1); | |
14d2bac1 | 2594 | case -EIO: |
4ae72a1e TH |
2595 | if (tries[dev->devno] == 1) { |
2596 | /* This is the last chance, better to slow | |
2597 | * down than lose it. | |
2598 | */ | |
936fd732 | 2599 | sata_down_spd_limit(&ap->link); |
4ae72a1e TH |
2600 | ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); |
2601 | } | |
14d2bac1 TH |
2602 | } |
2603 | ||
4ae72a1e | 2604 | if (!tries[dev->devno]) |
3373efd8 | 2605 | ata_dev_disable(dev); |
ec573755 | 2606 | |
14d2bac1 | 2607 | goto retry; |
1da177e4 LT |
2608 | } |
2609 | ||
2610 | /** | |
0cba632b JG |
2611 | * ata_port_probe - Mark port as enabled |
2612 | * @ap: Port for which we indicate enablement | |
1da177e4 | 2613 | * |
0cba632b JG |
2614 | * Modify @ap data structure such that the system |
2615 | * thinks that the entire port is enabled. | |
2616 | * | |
cca3974e | 2617 | * LOCKING: host lock, or some other form of |
0cba632b | 2618 | * serialization. |
1da177e4 LT |
2619 | */ |
2620 | ||
2621 | void ata_port_probe(struct ata_port *ap) | |
2622 | { | |
198e0fed | 2623 | ap->flags &= ~ATA_FLAG_DISABLED; |
1da177e4 LT |
2624 | } |
2625 | ||
3be680b7 TH |
2626 | /** |
2627 | * sata_print_link_status - Print SATA link status | |
936fd732 | 2628 | * @link: SATA link to printk link status about |
3be680b7 TH |
2629 | * |
2630 | * This function prints link speed and status of a SATA link. | |
2631 | * | |
2632 | * LOCKING: | |
2633 | * None. | |
2634 | */ | |
6bdb4fc9 | 2635 | static void sata_print_link_status(struct ata_link *link) |
3be680b7 | 2636 | { |
6d5f9732 | 2637 | u32 sstatus, scontrol, tmp; |
3be680b7 | 2638 | |
936fd732 | 2639 | if (sata_scr_read(link, SCR_STATUS, &sstatus)) |
3be680b7 | 2640 | return; |
936fd732 | 2641 | sata_scr_read(link, SCR_CONTROL, &scontrol); |
3be680b7 | 2642 | |
936fd732 | 2643 | if (ata_link_online(link)) { |
3be680b7 | 2644 | tmp = (sstatus >> 4) & 0xf; |
936fd732 | 2645 | ata_link_printk(link, KERN_INFO, |
f15a1daf TH |
2646 | "SATA link up %s (SStatus %X SControl %X)\n", |
2647 | sata_spd_string(tmp), sstatus, scontrol); | |
3be680b7 | 2648 | } else { |
936fd732 | 2649 | ata_link_printk(link, KERN_INFO, |
f15a1daf TH |
2650 | "SATA link down (SStatus %X SControl %X)\n", |
2651 | sstatus, scontrol); | |
3be680b7 TH |
2652 | } |
2653 | } | |
2654 | ||
ebdfca6e AC |
2655 | /** |
2656 | * ata_dev_pair - return other device on cable | |
ebdfca6e AC |
2657 | * @adev: device |
2658 | * | |
2659 | * Obtain the other device on the same cable, or if none is | |
2660 | * present NULL is returned | |
2661 | */ | |
2e9edbf8 | 2662 | |
3373efd8 | 2663 | struct ata_device *ata_dev_pair(struct ata_device *adev) |
ebdfca6e | 2664 | { |
9af5c9c9 TH |
2665 | struct ata_link *link = adev->link; |
2666 | struct ata_device *pair = &link->device[1 - adev->devno]; | |
e1211e3f | 2667 | if (!ata_dev_enabled(pair)) |
ebdfca6e AC |
2668 | return NULL; |
2669 | return pair; | |
2670 | } | |
2671 | ||
1da177e4 | 2672 | /** |
780a87f7 JG |
2673 | * ata_port_disable - Disable port. |
2674 | * @ap: Port to be disabled. | |
1da177e4 | 2675 | * |
780a87f7 JG |
2676 | * Modify @ap data structure such that the system |
2677 | * thinks that the entire port is disabled, and should | |
2678 | * never attempt to probe or communicate with devices | |
2679 | * on this port. | |
2680 | * | |
cca3974e | 2681 | * LOCKING: host lock, or some other form of |
780a87f7 | 2682 | * serialization. |
1da177e4 LT |
2683 | */ |
2684 | ||
2685 | void ata_port_disable(struct ata_port *ap) | |
2686 | { | |
9af5c9c9 TH |
2687 | ap->link.device[0].class = ATA_DEV_NONE; |
2688 | ap->link.device[1].class = ATA_DEV_NONE; | |
198e0fed | 2689 | ap->flags |= ATA_FLAG_DISABLED; |
1da177e4 LT |
2690 | } |
2691 | ||
1c3fae4d | 2692 | /** |
3c567b7d | 2693 | * sata_down_spd_limit - adjust SATA spd limit downward |
936fd732 | 2694 | * @link: Link to adjust SATA spd limit for |
1c3fae4d | 2695 | * |
936fd732 | 2696 | * Adjust SATA spd limit of @link downward. Note that this |
1c3fae4d | 2697 | * function only adjusts the limit. The change must be applied |
3c567b7d | 2698 | * using sata_set_spd(). |
1c3fae4d TH |
2699 | * |
2700 | * LOCKING: | |
2701 | * Inherited from caller. | |
2702 | * | |
2703 | * RETURNS: | |
2704 | * 0 on success, negative errno on failure | |
2705 | */ | |
936fd732 | 2706 | int sata_down_spd_limit(struct ata_link *link) |
1c3fae4d | 2707 | { |
81952c54 TH |
2708 | u32 sstatus, spd, mask; |
2709 | int rc, highbit; | |
1c3fae4d | 2710 | |
936fd732 | 2711 | if (!sata_scr_valid(link)) |
008a7896 TH |
2712 | return -EOPNOTSUPP; |
2713 | ||
2714 | /* If SCR can be read, use it to determine the current SPD. | |
936fd732 | 2715 | * If not, use cached value in link->sata_spd. |
008a7896 | 2716 | */ |
936fd732 | 2717 | rc = sata_scr_read(link, SCR_STATUS, &sstatus); |
008a7896 TH |
2718 | if (rc == 0) |
2719 | spd = (sstatus >> 4) & 0xf; | |
2720 | else | |
936fd732 | 2721 | spd = link->sata_spd; |
1c3fae4d | 2722 | |
936fd732 | 2723 | mask = link->sata_spd_limit; |
1c3fae4d TH |
2724 | if (mask <= 1) |
2725 | return -EINVAL; | |
008a7896 TH |
2726 | |
2727 | /* unconditionally mask off the highest bit */ | |
1c3fae4d TH |
2728 | highbit = fls(mask) - 1; |
2729 | mask &= ~(1 << highbit); | |
2730 | ||
008a7896 TH |
2731 | /* Mask off all speeds higher than or equal to the current |
2732 | * one. Force 1.5Gbps if current SPD is not available. | |
2733 | */ | |
2734 | if (spd > 1) | |
2735 | mask &= (1 << (spd - 1)) - 1; | |
2736 | else | |
2737 | mask &= 1; | |
2738 | ||
2739 | /* were we already at the bottom? */ | |
1c3fae4d TH |
2740 | if (!mask) |
2741 | return -EINVAL; | |
2742 | ||
936fd732 | 2743 | link->sata_spd_limit = mask; |
1c3fae4d | 2744 | |
936fd732 | 2745 | ata_link_printk(link, KERN_WARNING, "limiting SATA link speed to %s\n", |
f15a1daf | 2746 | sata_spd_string(fls(mask))); |
1c3fae4d TH |
2747 | |
2748 | return 0; | |
2749 | } | |
2750 | ||
936fd732 | 2751 | static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol) |
1c3fae4d | 2752 | { |
5270222f TH |
2753 | struct ata_link *host_link = &link->ap->link; |
2754 | u32 limit, target, spd; | |
1c3fae4d | 2755 | |
5270222f TH |
2756 | limit = link->sata_spd_limit; |
2757 | ||
2758 | /* Don't configure downstream link faster than upstream link. | |
2759 | * It doesn't speed up anything and some PMPs choke on such | |
2760 | * configuration. | |
2761 | */ | |
2762 | if (!ata_is_host_link(link) && host_link->sata_spd) | |
2763 | limit &= (1 << host_link->sata_spd) - 1; | |
2764 | ||
2765 | if (limit == UINT_MAX) | |
2766 | target = 0; | |
1c3fae4d | 2767 | else |
5270222f | 2768 | target = fls(limit); |
1c3fae4d TH |
2769 | |
2770 | spd = (*scontrol >> 4) & 0xf; | |
5270222f | 2771 | *scontrol = (*scontrol & ~0xf0) | ((target & 0xf) << 4); |
1c3fae4d | 2772 | |
5270222f | 2773 | return spd != target; |
1c3fae4d TH |
2774 | } |
2775 | ||
2776 | /** | |
3c567b7d | 2777 | * sata_set_spd_needed - is SATA spd configuration needed |
936fd732 | 2778 | * @link: Link in question |
1c3fae4d TH |
2779 | * |
2780 | * Test whether the spd limit in SControl matches | |
936fd732 | 2781 | * @link->sata_spd_limit. This function is used to determine |
1c3fae4d TH |
2782 | * whether hardreset is necessary to apply SATA spd |
2783 | * configuration. | |
2784 | * | |
2785 | * LOCKING: | |
2786 | * Inherited from caller. | |
2787 | * | |
2788 | * RETURNS: | |
2789 | * 1 if SATA spd configuration is needed, 0 otherwise. | |
2790 | */ | |
1dc55e87 | 2791 | static int sata_set_spd_needed(struct ata_link *link) |
1c3fae4d TH |
2792 | { |
2793 | u32 scontrol; | |
2794 | ||
936fd732 | 2795 | if (sata_scr_read(link, SCR_CONTROL, &scontrol)) |
db64bcf3 | 2796 | return 1; |
1c3fae4d | 2797 | |
936fd732 | 2798 | return __sata_set_spd_needed(link, &scontrol); |
1c3fae4d TH |
2799 | } |
2800 | ||
2801 | /** | |
3c567b7d | 2802 | * sata_set_spd - set SATA spd according to spd limit |
936fd732 | 2803 | * @link: Link to set SATA spd for |
1c3fae4d | 2804 | * |
936fd732 | 2805 | * Set SATA spd of @link according to sata_spd_limit. |
1c3fae4d TH |
2806 | * |
2807 | * LOCKING: | |
2808 | * Inherited from caller. | |
2809 | * | |
2810 | * RETURNS: | |
2811 | * 0 if spd doesn't need to be changed, 1 if spd has been | |
81952c54 | 2812 | * changed. Negative errno if SCR registers are inaccessible. |
1c3fae4d | 2813 | */ |
936fd732 | 2814 | int sata_set_spd(struct ata_link *link) |
1c3fae4d TH |
2815 | { |
2816 | u32 scontrol; | |
81952c54 | 2817 | int rc; |
1c3fae4d | 2818 | |
936fd732 | 2819 | if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) |
81952c54 | 2820 | return rc; |
1c3fae4d | 2821 | |
936fd732 | 2822 | if (!__sata_set_spd_needed(link, &scontrol)) |
1c3fae4d TH |
2823 | return 0; |
2824 | ||
936fd732 | 2825 | if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) |
81952c54 TH |
2826 | return rc; |
2827 | ||
1c3fae4d TH |
2828 | return 1; |
2829 | } | |
2830 | ||
452503f9 AC |
2831 | /* |
2832 | * This mode timing computation functionality is ported over from | |
2833 | * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik | |
2834 | */ | |
2835 | /* | |
b352e57d | 2836 | * PIO 0-4, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). |
452503f9 | 2837 | * These were taken from ATA/ATAPI-6 standard, rev 0a, except |
b352e57d AC |
2838 | * for UDMA6, which is currently supported only by Maxtor drives. |
2839 | * | |
2840 | * For PIO 5/6 MWDMA 3/4 see the CFA specification 3.0. | |
452503f9 AC |
2841 | */ |
2842 | ||
2843 | static const struct ata_timing ata_timing[] = { | |
70cd071e TH |
2844 | /* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */ |
2845 | { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, | |
2846 | { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, | |
2847 | { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, | |
2848 | { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, | |
2849 | { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, | |
2850 | { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 }, | |
2851 | { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 }, | |
452503f9 | 2852 | |
70cd071e TH |
2853 | { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, |
2854 | { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, | |
2855 | { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, | |
452503f9 | 2856 | |
70cd071e TH |
2857 | { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, |
2858 | { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, | |
2859 | { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, | |
b352e57d | 2860 | { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 100, 0 }, |
70cd071e | 2861 | { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 }, |
452503f9 AC |
2862 | |
2863 | /* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */ | |
70cd071e TH |
2864 | { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, |
2865 | { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, | |
2866 | { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, | |
2867 | { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, | |
2868 | { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, | |
2869 | { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, | |
2870 | { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, | |
452503f9 AC |
2871 | |
2872 | { 0xFF } | |
2873 | }; | |
2874 | ||
2dcb407e JG |
2875 | #define ENOUGH(v, unit) (((v)-1)/(unit)+1) |
2876 | #define EZ(v, unit) ((v)?ENOUGH(v, unit):0) | |
452503f9 AC |
2877 | |
2878 | static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT) | |
2879 | { | |
2880 | q->setup = EZ(t->setup * 1000, T); | |
2881 | q->act8b = EZ(t->act8b * 1000, T); | |
2882 | q->rec8b = EZ(t->rec8b * 1000, T); | |
2883 | q->cyc8b = EZ(t->cyc8b * 1000, T); | |
2884 | q->active = EZ(t->active * 1000, T); | |
2885 | q->recover = EZ(t->recover * 1000, T); | |
2886 | q->cycle = EZ(t->cycle * 1000, T); | |
2887 | q->udma = EZ(t->udma * 1000, UT); | |
2888 | } | |
2889 | ||
2890 | void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b, | |
2891 | struct ata_timing *m, unsigned int what) | |
2892 | { | |
2893 | if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup); | |
2894 | if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b); | |
2895 | if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b); | |
2896 | if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b); | |
2897 | if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active); | |
2898 | if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover); | |
2899 | if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle); | |
2900 | if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma); | |
2901 | } | |
2902 | ||
6357357c | 2903 | const struct ata_timing *ata_timing_find_mode(u8 xfer_mode) |
452503f9 | 2904 | { |
70cd071e TH |
2905 | const struct ata_timing *t = ata_timing; |
2906 | ||
2907 | while (xfer_mode > t->mode) | |
2908 | t++; | |
452503f9 | 2909 | |
70cd071e TH |
2910 | if (xfer_mode == t->mode) |
2911 | return t; | |
2912 | return NULL; | |
452503f9 AC |
2913 | } |
2914 | ||
2915 | int ata_timing_compute(struct ata_device *adev, unsigned short speed, | |
2916 | struct ata_timing *t, int T, int UT) | |
2917 | { | |
2918 | const struct ata_timing *s; | |
2919 | struct ata_timing p; | |
2920 | ||
2921 | /* | |
2e9edbf8 | 2922 | * Find the mode. |
75b1f2f8 | 2923 | */ |
452503f9 AC |
2924 | |
2925 | if (!(s = ata_timing_find_mode(speed))) | |
2926 | return -EINVAL; | |
2927 | ||
75b1f2f8 AL |
2928 | memcpy(t, s, sizeof(*s)); |
2929 | ||
452503f9 AC |
2930 | /* |
2931 | * If the drive is an EIDE drive, it can tell us it needs extended | |
2932 | * PIO/MW_DMA cycle timing. | |
2933 | */ | |
2934 | ||
2935 | if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ | |
2936 | memset(&p, 0, sizeof(p)); | |
2dcb407e | 2937 | if (speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { |
452503f9 AC |
2938 | if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO]; |
2939 | else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY]; | |
2dcb407e | 2940 | } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) { |
452503f9 AC |
2941 | p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN]; |
2942 | } | |
2943 | ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); | |
2944 | } | |
2945 | ||
2946 | /* | |
2947 | * Convert the timing to bus clock counts. | |
2948 | */ | |
2949 | ||
75b1f2f8 | 2950 | ata_timing_quantize(t, t, T, UT); |
452503f9 AC |
2951 | |
2952 | /* | |
c893a3ae RD |
2953 | * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, |
2954 | * S.M.A.R.T * and some other commands. We have to ensure that the | |
2955 | * DMA cycle timing is slower/equal than the fastest PIO timing. | |
452503f9 AC |
2956 | */ |
2957 | ||
fd3367af | 2958 | if (speed > XFER_PIO_6) { |
452503f9 AC |
2959 | ata_timing_compute(adev, adev->pio_mode, &p, T, UT); |
2960 | ata_timing_merge(&p, t, t, ATA_TIMING_ALL); | |
2961 | } | |
2962 | ||
2963 | /* | |
c893a3ae | 2964 | * Lengthen active & recovery time so that cycle time is correct. |
452503f9 AC |
2965 | */ |
2966 | ||
2967 | if (t->act8b + t->rec8b < t->cyc8b) { | |
2968 | t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; | |
2969 | t->rec8b = t->cyc8b - t->act8b; | |
2970 | } | |
2971 | ||
2972 | if (t->active + t->recover < t->cycle) { | |
2973 | t->active += (t->cycle - (t->active + t->recover)) / 2; | |
2974 | t->recover = t->cycle - t->active; | |
2975 | } | |
a617c09f | 2976 | |
4f701d1e AC |
2977 | /* In a few cases quantisation may produce enough errors to |
2978 | leave t->cycle too low for the sum of active and recovery | |
2979 | if so we must correct this */ | |
2980 | if (t->active + t->recover > t->cycle) | |
2981 | t->cycle = t->active + t->recover; | |
452503f9 AC |
2982 | |
2983 | return 0; | |
2984 | } | |
2985 | ||
a0f79b92 TH |
2986 | /** |
2987 | * ata_timing_cycle2mode - find xfer mode for the specified cycle duration | |
2988 | * @xfer_shift: ATA_SHIFT_* value for transfer type to examine. | |
2989 | * @cycle: cycle duration in ns | |
2990 | * | |
2991 | * Return matching xfer mode for @cycle. The returned mode is of | |
2992 | * the transfer type specified by @xfer_shift. If @cycle is too | |
2993 | * slow for @xfer_shift, 0xff is returned. If @cycle is faster | |
2994 | * than the fastest known mode, the fasted mode is returned. | |
2995 | * | |
2996 | * LOCKING: | |
2997 | * None. | |
2998 | * | |
2999 | * RETURNS: | |
3000 | * Matching xfer_mode, 0xff if no match found. | |
3001 | */ | |
3002 | u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle) | |
3003 | { | |
3004 | u8 base_mode = 0xff, last_mode = 0xff; | |
3005 | const struct ata_xfer_ent *ent; | |
3006 | const struct ata_timing *t; | |
3007 | ||
3008 | for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) | |
3009 | if (ent->shift == xfer_shift) | |
3010 | base_mode = ent->base; | |
3011 | ||
3012 | for (t = ata_timing_find_mode(base_mode); | |
3013 | t && ata_xfer_mode2shift(t->mode) == xfer_shift; t++) { | |
3014 | unsigned short this_cycle; | |
3015 | ||
3016 | switch (xfer_shift) { | |
3017 | case ATA_SHIFT_PIO: | |
3018 | case ATA_SHIFT_MWDMA: | |
3019 | this_cycle = t->cycle; | |
3020 | break; | |
3021 | case ATA_SHIFT_UDMA: | |
3022 | this_cycle = t->udma; | |
3023 | break; | |
3024 | default: | |
3025 | return 0xff; | |
3026 | } | |
3027 | ||
3028 | if (cycle > this_cycle) | |
3029 | break; | |
3030 | ||
3031 | last_mode = t->mode; | |
3032 | } | |
3033 | ||
3034 | return last_mode; | |
3035 | } | |
3036 | ||
cf176e1a TH |
3037 | /** |
3038 | * ata_down_xfermask_limit - adjust dev xfer masks downward | |
cf176e1a | 3039 | * @dev: Device to adjust xfer masks |
458337db | 3040 | * @sel: ATA_DNXFER_* selector |
cf176e1a TH |
3041 | * |
3042 | * Adjust xfer masks of @dev downward. Note that this function | |
3043 | * does not apply the change. Invoking ata_set_mode() afterwards | |
3044 | * will apply the limit. | |
3045 | * | |
3046 | * LOCKING: | |
3047 | * Inherited from caller. | |
3048 | * | |
3049 | * RETURNS: | |
3050 | * 0 on success, negative errno on failure | |
3051 | */ | |
458337db | 3052 | int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel) |
cf176e1a | 3053 | { |
458337db | 3054 | char buf[32]; |
7dc951ae TH |
3055 | unsigned long orig_mask, xfer_mask; |
3056 | unsigned long pio_mask, mwdma_mask, udma_mask; | |
458337db | 3057 | int quiet, highbit; |
cf176e1a | 3058 | |
458337db TH |
3059 | quiet = !!(sel & ATA_DNXFER_QUIET); |
3060 | sel &= ~ATA_DNXFER_QUIET; | |
cf176e1a | 3061 | |
458337db TH |
3062 | xfer_mask = orig_mask = ata_pack_xfermask(dev->pio_mask, |
3063 | dev->mwdma_mask, | |
3064 | dev->udma_mask); | |
3065 | ata_unpack_xfermask(xfer_mask, &pio_mask, &mwdma_mask, &udma_mask); | |
cf176e1a | 3066 | |
458337db TH |
3067 | switch (sel) { |
3068 | case ATA_DNXFER_PIO: | |
3069 | highbit = fls(pio_mask) - 1; | |
3070 | pio_mask &= ~(1 << highbit); | |
3071 | break; | |
3072 | ||
3073 | case ATA_DNXFER_DMA: | |
3074 | if (udma_mask) { | |
3075 | highbit = fls(udma_mask) - 1; | |
3076 | udma_mask &= ~(1 << highbit); | |
3077 | if (!udma_mask) | |
3078 | return -ENOENT; | |
3079 | } else if (mwdma_mask) { | |
3080 | highbit = fls(mwdma_mask) - 1; | |
3081 | mwdma_mask &= ~(1 << highbit); | |
3082 | if (!mwdma_mask) | |
3083 | return -ENOENT; | |
3084 | } | |
3085 | break; | |
3086 | ||
3087 | case ATA_DNXFER_40C: | |
3088 | udma_mask &= ATA_UDMA_MASK_40C; | |
3089 | break; | |
3090 | ||
3091 | case ATA_DNXFER_FORCE_PIO0: | |
3092 | pio_mask &= 1; | |
3093 | case ATA_DNXFER_FORCE_PIO: | |
3094 | mwdma_mask = 0; | |
3095 | udma_mask = 0; | |
3096 | break; | |
3097 | ||
458337db TH |
3098 | default: |
3099 | BUG(); | |
3100 | } | |
3101 | ||
3102 | xfer_mask &= ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); | |
3103 | ||
3104 | if (!(xfer_mask & ATA_MASK_PIO) || xfer_mask == orig_mask) | |
3105 | return -ENOENT; | |
3106 | ||
3107 | if (!quiet) { | |
3108 | if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA)) | |
3109 | snprintf(buf, sizeof(buf), "%s:%s", | |
3110 | ata_mode_string(xfer_mask), | |
3111 | ata_mode_string(xfer_mask & ATA_MASK_PIO)); | |
3112 | else | |
3113 | snprintf(buf, sizeof(buf), "%s", | |
3114 | ata_mode_string(xfer_mask)); | |
3115 | ||
3116 | ata_dev_printk(dev, KERN_WARNING, | |
3117 | "limiting speed to %s\n", buf); | |
3118 | } | |
cf176e1a TH |
3119 | |
3120 | ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask, | |
3121 | &dev->udma_mask); | |
3122 | ||
cf176e1a | 3123 | return 0; |
cf176e1a TH |
3124 | } |
3125 | ||
3373efd8 | 3126 | static int ata_dev_set_mode(struct ata_device *dev) |
1da177e4 | 3127 | { |
9af5c9c9 | 3128 | struct ata_eh_context *ehc = &dev->link->eh_context; |
4055dee7 TH |
3129 | const char *dev_err_whine = ""; |
3130 | int ign_dev_err = 0; | |
83206a29 TH |
3131 | unsigned int err_mask; |
3132 | int rc; | |
1da177e4 | 3133 | |
e8384607 | 3134 | dev->flags &= ~ATA_DFLAG_PIO; |
1da177e4 LT |
3135 | if (dev->xfer_shift == ATA_SHIFT_PIO) |
3136 | dev->flags |= ATA_DFLAG_PIO; | |
3137 | ||
3373efd8 | 3138 | err_mask = ata_dev_set_xfermode(dev); |
2dcb407e | 3139 | |
4055dee7 TH |
3140 | if (err_mask & ~AC_ERR_DEV) |
3141 | goto fail; | |
3142 | ||
3143 | /* revalidate */ | |
3144 | ehc->i.flags |= ATA_EHI_POST_SETMODE; | |
3145 | rc = ata_dev_revalidate(dev, ATA_DEV_UNKNOWN, 0); | |
3146 | ehc->i.flags &= ~ATA_EHI_POST_SETMODE; | |
3147 | if (rc) | |
3148 | return rc; | |
3149 | ||
b93fda12 AC |
3150 | if (dev->xfer_shift == ATA_SHIFT_PIO) { |
3151 | /* Old CFA may refuse this command, which is just fine */ | |
3152 | if (ata_id_is_cfa(dev->id)) | |
3153 | ign_dev_err = 1; | |
3154 | /* Catch several broken garbage emulations plus some pre | |
3155 | ATA devices */ | |
3156 | if (ata_id_major_version(dev->id) == 0 && | |
3157 | dev->pio_mode <= XFER_PIO_2) | |
3158 | ign_dev_err = 1; | |
3159 | /* Some very old devices and some bad newer ones fail | |
3160 | any kind of SET_XFERMODE request but support PIO0-2 | |
3161 | timings and no IORDY */ | |
3162 | if (!ata_id_has_iordy(dev->id) && dev->pio_mode <= XFER_PIO_2) | |
3163 | ign_dev_err = 1; | |
3164 | } | |
3acaf94b AC |
3165 | /* Early MWDMA devices do DMA but don't allow DMA mode setting. |
3166 | Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */ | |
c5038fc0 | 3167 | if (dev->xfer_shift == ATA_SHIFT_MWDMA && |
3acaf94b AC |
3168 | dev->dma_mode == XFER_MW_DMA_0 && |
3169 | (dev->id[63] >> 8) & 1) | |
4055dee7 | 3170 | ign_dev_err = 1; |
3acaf94b | 3171 | |
4055dee7 TH |
3172 | /* if the device is actually configured correctly, ignore dev err */ |
3173 | if (dev->xfer_mode == ata_xfer_mask2mode(ata_id_xfermask(dev->id))) | |
3174 | ign_dev_err = 1; | |
1da177e4 | 3175 | |
4055dee7 TH |
3176 | if (err_mask & AC_ERR_DEV) { |
3177 | if (!ign_dev_err) | |
3178 | goto fail; | |
3179 | else | |
3180 | dev_err_whine = " (device error ignored)"; | |
3181 | } | |
48a8a14f | 3182 | |
23e71c3d TH |
3183 | DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n", |
3184 | dev->xfer_shift, (int)dev->xfer_mode); | |
1da177e4 | 3185 | |
4055dee7 TH |
3186 | ata_dev_printk(dev, KERN_INFO, "configured for %s%s\n", |
3187 | ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode)), | |
3188 | dev_err_whine); | |
3189 | ||
83206a29 | 3190 | return 0; |
4055dee7 TH |
3191 | |
3192 | fail: | |
3193 | ata_dev_printk(dev, KERN_ERR, "failed to set xfermode " | |
3194 | "(err_mask=0x%x)\n", err_mask); | |
3195 | return -EIO; | |
1da177e4 LT |
3196 | } |
3197 | ||
1da177e4 | 3198 | /** |
04351821 | 3199 | * ata_do_set_mode - Program timings and issue SET FEATURES - XFER |
0260731f | 3200 | * @link: link on which timings will be programmed |
1967b7ff | 3201 | * @r_failed_dev: out parameter for failed device |
1da177e4 | 3202 | * |
04351821 A |
3203 | * Standard implementation of the function used to tune and set |
3204 | * ATA device disk transfer mode (PIO3, UDMA6, etc.). If | |
3205 | * ata_dev_set_mode() fails, pointer to the failing device is | |
e82cbdb9 | 3206 | * returned in @r_failed_dev. |
780a87f7 | 3207 | * |
1da177e4 | 3208 | * LOCKING: |
0cba632b | 3209 | * PCI/etc. bus probe sem. |
e82cbdb9 TH |
3210 | * |
3211 | * RETURNS: | |
3212 | * 0 on success, negative errno otherwise | |
1da177e4 | 3213 | */ |
04351821 | 3214 | |
0260731f | 3215 | int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) |
1da177e4 | 3216 | { |
0260731f | 3217 | struct ata_port *ap = link->ap; |
e8e0619f | 3218 | struct ata_device *dev; |
f58229f8 | 3219 | int rc = 0, used_dma = 0, found = 0; |
3adcebb2 | 3220 | |
a6d5a51c | 3221 | /* step 1: calculate xfer_mask */ |
f58229f8 | 3222 | ata_link_for_each_dev(dev, link) { |
7dc951ae | 3223 | unsigned long pio_mask, dma_mask; |
b3a70601 | 3224 | unsigned int mode_mask; |
a6d5a51c | 3225 | |
e1211e3f | 3226 | if (!ata_dev_enabled(dev)) |
a6d5a51c TH |
3227 | continue; |
3228 | ||
b3a70601 AC |
3229 | mode_mask = ATA_DMA_MASK_ATA; |
3230 | if (dev->class == ATA_DEV_ATAPI) | |
3231 | mode_mask = ATA_DMA_MASK_ATAPI; | |
3232 | else if (ata_id_is_cfa(dev->id)) | |
3233 | mode_mask = ATA_DMA_MASK_CFA; | |
3234 | ||
3373efd8 | 3235 | ata_dev_xfermask(dev); |
33267325 | 3236 | ata_force_xfermask(dev); |
1da177e4 | 3237 | |
acf356b1 TH |
3238 | pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0); |
3239 | dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask); | |
b3a70601 AC |
3240 | |
3241 | if (libata_dma_mask & mode_mask) | |
3242 | dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask); | |
3243 | else | |
3244 | dma_mask = 0; | |
3245 | ||
acf356b1 TH |
3246 | dev->pio_mode = ata_xfer_mask2mode(pio_mask); |
3247 | dev->dma_mode = ata_xfer_mask2mode(dma_mask); | |
5444a6f4 | 3248 | |
4f65977d | 3249 | found = 1; |
70cd071e | 3250 | if (dev->dma_mode != 0xff) |
5444a6f4 | 3251 | used_dma = 1; |
a6d5a51c | 3252 | } |
4f65977d | 3253 | if (!found) |
e82cbdb9 | 3254 | goto out; |
a6d5a51c TH |
3255 | |
3256 | /* step 2: always set host PIO timings */ | |
f58229f8 | 3257 | ata_link_for_each_dev(dev, link) { |
e8e0619f TH |
3258 | if (!ata_dev_enabled(dev)) |
3259 | continue; | |
3260 | ||
70cd071e | 3261 | if (dev->pio_mode == 0xff) { |
f15a1daf | 3262 | ata_dev_printk(dev, KERN_WARNING, "no PIO support\n"); |
e8e0619f | 3263 | rc = -EINVAL; |
e82cbdb9 | 3264 | goto out; |
e8e0619f TH |
3265 | } |
3266 | ||
3267 | dev->xfer_mode = dev->pio_mode; | |
3268 | dev->xfer_shift = ATA_SHIFT_PIO; | |
3269 | if (ap->ops->set_piomode) | |
3270 | ap->ops->set_piomode(ap, dev); | |
3271 | } | |
1da177e4 | 3272 | |
a6d5a51c | 3273 | /* step 3: set host DMA timings */ |
f58229f8 | 3274 | ata_link_for_each_dev(dev, link) { |
70cd071e | 3275 | if (!ata_dev_enabled(dev) || dev->dma_mode == 0xff) |
e8e0619f TH |
3276 | continue; |
3277 | ||
3278 | dev->xfer_mode = dev->dma_mode; | |
3279 | dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode); | |
3280 | if (ap->ops->set_dmamode) | |
3281 | ap->ops->set_dmamode(ap, dev); | |
3282 | } | |
1da177e4 LT |
3283 | |
3284 | /* step 4: update devices' xfer mode */ | |
f58229f8 | 3285 | ata_link_for_each_dev(dev, link) { |
18d90deb | 3286 | /* don't update suspended devices' xfer mode */ |
9666f400 | 3287 | if (!ata_dev_enabled(dev)) |
83206a29 TH |
3288 | continue; |
3289 | ||
3373efd8 | 3290 | rc = ata_dev_set_mode(dev); |
5bbc53f4 | 3291 | if (rc) |
e82cbdb9 | 3292 | goto out; |
83206a29 | 3293 | } |
1da177e4 | 3294 | |
e8e0619f TH |
3295 | /* Record simplex status. If we selected DMA then the other |
3296 | * host channels are not permitted to do so. | |
5444a6f4 | 3297 | */ |
cca3974e | 3298 | if (used_dma && (ap->host->flags & ATA_HOST_SIMPLEX)) |
032af1ce | 3299 | ap->host->simplex_claimed = ap; |
5444a6f4 | 3300 | |
e82cbdb9 TH |
3301 | out: |
3302 | if (rc) | |
3303 | *r_failed_dev = dev; | |
3304 | return rc; | |
1da177e4 LT |
3305 | } |
3306 | ||
aa2731ad TH |
3307 | /** |
3308 | * ata_wait_ready - wait for link to become ready | |
3309 | * @link: link to be waited on | |
3310 | * @deadline: deadline jiffies for the operation | |
3311 | * @check_ready: callback to check link readiness | |
3312 | * | |
3313 | * Wait for @link to become ready. @check_ready should return | |
3314 | * positive number if @link is ready, 0 if it isn't, -ENODEV if | |
3315 | * link doesn't seem to be occupied, other errno for other error | |
3316 | * conditions. | |
3317 | * | |
3318 | * Transient -ENODEV conditions are allowed for | |
3319 | * ATA_TMOUT_FF_WAIT. | |
3320 | * | |
3321 | * LOCKING: | |
3322 | * EH context. | |
3323 | * | |
3324 | * RETURNS: | |
3325 | * 0 if @linke is ready before @deadline; otherwise, -errno. | |
3326 | */ | |
3327 | int ata_wait_ready(struct ata_link *link, unsigned long deadline, | |
3328 | int (*check_ready)(struct ata_link *link)) | |
3329 | { | |
3330 | unsigned long start = jiffies; | |
341c2c95 | 3331 | unsigned long nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT); |
aa2731ad TH |
3332 | int warned = 0; |
3333 | ||
3334 | if (time_after(nodev_deadline, deadline)) | |
3335 | nodev_deadline = deadline; | |
3336 | ||
3337 | while (1) { | |
3338 | unsigned long now = jiffies; | |
3339 | int ready, tmp; | |
3340 | ||
3341 | ready = tmp = check_ready(link); | |
3342 | if (ready > 0) | |
3343 | return 0; | |
3344 | ||
3345 | /* -ENODEV could be transient. Ignore -ENODEV if link | |
3346 | * is online. Also, some SATA devices take a long | |
3347 | * time to clear 0xff after reset. For example, | |
3348 | * HHD424020F7SV00 iVDR needs >= 800ms while Quantum | |
3349 | * GoVault needs even more than that. Wait for | |
3350 | * ATA_TMOUT_FF_WAIT on -ENODEV if link isn't offline. | |
3351 | * | |
3352 | * Note that some PATA controllers (pata_ali) explode | |
3353 | * if status register is read more than once when | |
3354 | * there's no device attached. | |
3355 | */ | |
3356 | if (ready == -ENODEV) { | |
3357 | if (ata_link_online(link)) | |
3358 | ready = 0; | |
3359 | else if ((link->ap->flags & ATA_FLAG_SATA) && | |
3360 | !ata_link_offline(link) && | |
3361 | time_before(now, nodev_deadline)) | |
3362 | ready = 0; | |
3363 | } | |
3364 | ||
3365 | if (ready) | |
3366 | return ready; | |
3367 | if (time_after(now, deadline)) | |
3368 | return -EBUSY; | |
3369 | ||
3370 | if (!warned && time_after(now, start + 5 * HZ) && | |
3371 | (deadline - now > 3 * HZ)) { | |
3372 | ata_link_printk(link, KERN_WARNING, | |
3373 | "link is slow to respond, please be patient " | |
3374 | "(ready=%d)\n", tmp); | |
3375 | warned = 1; | |
3376 | } | |
3377 | ||
3378 | msleep(50); | |
3379 | } | |
3380 | } | |
3381 | ||
3382 | /** | |
3383 | * ata_wait_after_reset - wait for link to become ready after reset | |
3384 | * @link: link to be waited on | |
3385 | * @deadline: deadline jiffies for the operation | |
3386 | * @check_ready: callback to check link readiness | |
3387 | * | |
3388 | * Wait for @link to become ready after reset. | |
3389 | * | |
3390 | * LOCKING: | |
3391 | * EH context. | |
3392 | * | |
3393 | * RETURNS: | |
3394 | * 0 if @linke is ready before @deadline; otherwise, -errno. | |
3395 | */ | |
2b4221bb | 3396 | int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, |
aa2731ad TH |
3397 | int (*check_ready)(struct ata_link *link)) |
3398 | { | |
341c2c95 | 3399 | msleep(ATA_WAIT_AFTER_RESET); |
aa2731ad TH |
3400 | |
3401 | return ata_wait_ready(link, deadline, check_ready); | |
3402 | } | |
3403 | ||
d7bb4cc7 | 3404 | /** |
936fd732 TH |
3405 | * sata_link_debounce - debounce SATA phy status |
3406 | * @link: ATA link to debounce SATA phy status for | |
d7bb4cc7 | 3407 | * @params: timing parameters { interval, duratinon, timeout } in msec |
d4b2bab4 | 3408 | * @deadline: deadline jiffies for the operation |
d7bb4cc7 | 3409 | * |
936fd732 | 3410 | * Make sure SStatus of @link reaches stable state, determined by |
d7bb4cc7 TH |
3411 | * holding the same value where DET is not 1 for @duration polled |
3412 | * every @interval, before @timeout. Timeout constraints the | |
d4b2bab4 TH |
3413 | * beginning of the stable state. Because DET gets stuck at 1 on |
3414 | * some controllers after hot unplugging, this functions waits | |
d7bb4cc7 TH |
3415 | * until timeout then returns 0 if DET is stable at 1. |
3416 | * | |
d4b2bab4 TH |
3417 | * @timeout is further limited by @deadline. The sooner of the |
3418 | * two is used. | |
3419 | * | |
d7bb4cc7 TH |
3420 | * LOCKING: |
3421 | * Kernel thread context (may sleep) | |
3422 | * | |
3423 | * RETURNS: | |
3424 | * 0 on success, -errno on failure. | |
3425 | */ | |
936fd732 TH |
3426 | int sata_link_debounce(struct ata_link *link, const unsigned long *params, |
3427 | unsigned long deadline) | |
7a7921e8 | 3428 | { |
341c2c95 TH |
3429 | unsigned long interval = params[0]; |
3430 | unsigned long duration = params[1]; | |
d4b2bab4 | 3431 | unsigned long last_jiffies, t; |
d7bb4cc7 TH |
3432 | u32 last, cur; |
3433 | int rc; | |
3434 | ||
341c2c95 | 3435 | t = ata_deadline(jiffies, params[2]); |
d4b2bab4 TH |
3436 | if (time_before(t, deadline)) |
3437 | deadline = t; | |
3438 | ||
936fd732 | 3439 | if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) |
d7bb4cc7 TH |
3440 | return rc; |
3441 | cur &= 0xf; | |
3442 | ||
3443 | last = cur; | |
3444 | last_jiffies = jiffies; | |
3445 | ||
3446 | while (1) { | |
341c2c95 | 3447 | msleep(interval); |
936fd732 | 3448 | if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) |
d7bb4cc7 TH |
3449 | return rc; |
3450 | cur &= 0xf; | |
3451 | ||
3452 | /* DET stable? */ | |
3453 | if (cur == last) { | |
d4b2bab4 | 3454 | if (cur == 1 && time_before(jiffies, deadline)) |
d7bb4cc7 | 3455 | continue; |
341c2c95 TH |
3456 | if (time_after(jiffies, |
3457 | ata_deadline(last_jiffies, duration))) | |
d7bb4cc7 TH |
3458 | return 0; |
3459 | continue; | |
3460 | } | |
3461 | ||
3462 | /* unstable, start over */ | |
3463 | last = cur; | |
3464 | last_jiffies = jiffies; | |
3465 | ||
f1545154 TH |
3466 | /* Check deadline. If debouncing failed, return |
3467 | * -EPIPE to tell upper layer to lower link speed. | |
3468 | */ | |
d4b2bab4 | 3469 | if (time_after(jiffies, deadline)) |
f1545154 | 3470 | return -EPIPE; |
d7bb4cc7 TH |
3471 | } |
3472 | } | |
3473 | ||
3474 | /** | |
936fd732 TH |
3475 | * sata_link_resume - resume SATA link |
3476 | * @link: ATA link to resume SATA | |
d7bb4cc7 | 3477 | * @params: timing parameters { interval, duratinon, timeout } in msec |
d4b2bab4 | 3478 | * @deadline: deadline jiffies for the operation |
d7bb4cc7 | 3479 | * |
936fd732 | 3480 | * Resume SATA phy @link and debounce it. |
d7bb4cc7 TH |
3481 | * |
3482 | * LOCKING: | |
3483 | * Kernel thread context (may sleep) | |
3484 | * | |
3485 | * RETURNS: | |
3486 | * 0 on success, -errno on failure. | |
3487 | */ | |
936fd732 TH |
3488 | int sata_link_resume(struct ata_link *link, const unsigned long *params, |
3489 | unsigned long deadline) | |
d7bb4cc7 | 3490 | { |
ac371987 | 3491 | u32 scontrol, serror; |
81952c54 TH |
3492 | int rc; |
3493 | ||
936fd732 | 3494 | if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) |
81952c54 | 3495 | return rc; |
7a7921e8 | 3496 | |
852ee16a | 3497 | scontrol = (scontrol & 0x0f0) | 0x300; |
81952c54 | 3498 | |
936fd732 | 3499 | if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) |
81952c54 | 3500 | return rc; |
7a7921e8 | 3501 | |
d7bb4cc7 TH |
3502 | /* Some PHYs react badly if SStatus is pounded immediately |
3503 | * after resuming. Delay 200ms before debouncing. | |
3504 | */ | |
3505 | msleep(200); | |
7a7921e8 | 3506 | |
ac371987 TH |
3507 | if ((rc = sata_link_debounce(link, params, deadline))) |
3508 | return rc; | |
3509 | ||
f046519f | 3510 | /* clear SError, some PHYs require this even for SRST to work */ |
ac371987 TH |
3511 | if (!(rc = sata_scr_read(link, SCR_ERROR, &serror))) |
3512 | rc = sata_scr_write(link, SCR_ERROR, serror); | |
ac371987 | 3513 | |
f046519f | 3514 | return rc != -EINVAL ? rc : 0; |
7a7921e8 TH |
3515 | } |
3516 | ||
f5914a46 | 3517 | /** |
0aa1113d | 3518 | * ata_std_prereset - prepare for reset |
cc0680a5 | 3519 | * @link: ATA link to be reset |
d4b2bab4 | 3520 | * @deadline: deadline jiffies for the operation |
f5914a46 | 3521 | * |
cc0680a5 | 3522 | * @link is about to be reset. Initialize it. Failure from |
b8cffc6a TH |
3523 | * prereset makes libata abort whole reset sequence and give up |
3524 | * that port, so prereset should be best-effort. It does its | |
3525 | * best to prepare for reset sequence but if things go wrong, it | |
3526 | * should just whine, not fail. | |
f5914a46 TH |
3527 | * |
3528 | * LOCKING: | |
3529 | * Kernel thread context (may sleep) | |
3530 | * | |
3531 | * RETURNS: | |
3532 | * 0 on success, -errno otherwise. | |
3533 | */ | |
0aa1113d | 3534 | int ata_std_prereset(struct ata_link *link, unsigned long deadline) |
f5914a46 | 3535 | { |
cc0680a5 | 3536 | struct ata_port *ap = link->ap; |
936fd732 | 3537 | struct ata_eh_context *ehc = &link->eh_context; |
e9c83914 | 3538 | const unsigned long *timing = sata_ehc_deb_timing(ehc); |
f5914a46 TH |
3539 | int rc; |
3540 | ||
f5914a46 TH |
3541 | /* if we're about to do hardreset, nothing more to do */ |
3542 | if (ehc->i.action & ATA_EH_HARDRESET) | |
3543 | return 0; | |
3544 | ||
936fd732 | 3545 | /* if SATA, resume link */ |
a16abc0b | 3546 | if (ap->flags & ATA_FLAG_SATA) { |
936fd732 | 3547 | rc = sata_link_resume(link, timing, deadline); |
b8cffc6a TH |
3548 | /* whine about phy resume failure but proceed */ |
3549 | if (rc && rc != -EOPNOTSUPP) | |
cc0680a5 | 3550 | ata_link_printk(link, KERN_WARNING, "failed to resume " |
f5914a46 | 3551 | "link for reset (errno=%d)\n", rc); |
f5914a46 TH |
3552 | } |
3553 | ||
45db2f6c TH |
3554 | /* no point in trying softreset on offline link */ |
3555 | if (ata_link_offline(link)) | |
3556 | ehc->i.action &= ~ATA_EH_SOFTRESET; | |
3557 | ||
f5914a46 TH |
3558 | return 0; |
3559 | } | |
3560 | ||
c2bd5804 | 3561 | /** |
624d5c51 TH |
3562 | * sata_link_hardreset - reset link via SATA phy reset |
3563 | * @link: link to reset | |
3564 | * @timing: timing parameters { interval, duratinon, timeout } in msec | |
d4b2bab4 | 3565 | * @deadline: deadline jiffies for the operation |
9dadd45b TH |
3566 | * @online: optional out parameter indicating link onlineness |
3567 | * @check_ready: optional callback to check link readiness | |
c2bd5804 | 3568 | * |
624d5c51 | 3569 | * SATA phy-reset @link using DET bits of SControl register. |
9dadd45b TH |
3570 | * After hardreset, link readiness is waited upon using |
3571 | * ata_wait_ready() if @check_ready is specified. LLDs are | |
3572 | * allowed to not specify @check_ready and wait itself after this | |
3573 | * function returns. Device classification is LLD's | |
3574 | * responsibility. | |
3575 | * | |
3576 | * *@online is set to one iff reset succeeded and @link is online | |
3577 | * after reset. | |
c2bd5804 TH |
3578 | * |
3579 | * LOCKING: | |
3580 | * Kernel thread context (may sleep) | |
3581 | * | |
3582 | * RETURNS: | |
3583 | * 0 on success, -errno otherwise. | |
3584 | */ | |
624d5c51 | 3585 | int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, |
9dadd45b TH |
3586 | unsigned long deadline, |
3587 | bool *online, int (*check_ready)(struct ata_link *)) | |
c2bd5804 | 3588 | { |
624d5c51 | 3589 | u32 scontrol; |
81952c54 | 3590 | int rc; |
852ee16a | 3591 | |
c2bd5804 TH |
3592 | DPRINTK("ENTER\n"); |
3593 | ||
9dadd45b TH |
3594 | if (online) |
3595 | *online = false; | |
3596 | ||
936fd732 | 3597 | if (sata_set_spd_needed(link)) { |
1c3fae4d TH |
3598 | /* SATA spec says nothing about how to reconfigure |
3599 | * spd. To be on the safe side, turn off phy during | |
3600 | * reconfiguration. This works for at least ICH7 AHCI | |
3601 | * and Sil3124. | |
3602 | */ | |
936fd732 | 3603 | if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) |
b6103f6d | 3604 | goto out; |
81952c54 | 3605 | |
a34b6fc0 | 3606 | scontrol = (scontrol & 0x0f0) | 0x304; |
81952c54 | 3607 | |
936fd732 | 3608 | if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) |
b6103f6d | 3609 | goto out; |
1c3fae4d | 3610 | |
936fd732 | 3611 | sata_set_spd(link); |
1c3fae4d TH |
3612 | } |
3613 | ||
3614 | /* issue phy wake/reset */ | |
936fd732 | 3615 | if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) |
b6103f6d | 3616 | goto out; |
81952c54 | 3617 | |
852ee16a | 3618 | scontrol = (scontrol & 0x0f0) | 0x301; |
81952c54 | 3619 | |
936fd732 | 3620 | if ((rc = sata_scr_write_flush(link, SCR_CONTROL, scontrol))) |
b6103f6d | 3621 | goto out; |
c2bd5804 | 3622 | |
1c3fae4d | 3623 | /* Couldn't find anything in SATA I/II specs, but AHCI-1.1 |
c2bd5804 TH |
3624 | * 10.4.2 says at least 1 ms. |
3625 | */ | |
3626 | msleep(1); | |
3627 | ||
936fd732 TH |
3628 | /* bring link back */ |
3629 | rc = sata_link_resume(link, timing, deadline); | |
9dadd45b TH |
3630 | if (rc) |
3631 | goto out; | |
3632 | /* if link is offline nothing more to do */ | |
3633 | if (ata_link_offline(link)) | |
3634 | goto out; | |
3635 | ||
3636 | /* Link is online. From this point, -ENODEV too is an error. */ | |
3637 | if (online) | |
3638 | *online = true; | |
3639 | ||
071f44b1 | 3640 | if (sata_pmp_supported(link->ap) && ata_is_host_link(link)) { |
9dadd45b TH |
3641 | /* If PMP is supported, we have to do follow-up SRST. |
3642 | * Some PMPs don't send D2H Reg FIS after hardreset if | |
3643 | * the first port is empty. Wait only for | |
3644 | * ATA_TMOUT_PMP_SRST_WAIT. | |
3645 | */ | |
3646 | if (check_ready) { | |
3647 | unsigned long pmp_deadline; | |
3648 | ||
341c2c95 TH |
3649 | pmp_deadline = ata_deadline(jiffies, |
3650 | ATA_TMOUT_PMP_SRST_WAIT); | |
9dadd45b TH |
3651 | if (time_after(pmp_deadline, deadline)) |
3652 | pmp_deadline = deadline; | |
3653 | ata_wait_ready(link, pmp_deadline, check_ready); | |
3654 | } | |
3655 | rc = -EAGAIN; | |
3656 | goto out; | |
3657 | } | |
3658 | ||
3659 | rc = 0; | |
3660 | if (check_ready) | |
3661 | rc = ata_wait_ready(link, deadline, check_ready); | |
b6103f6d | 3662 | out: |
0cbf0711 TH |
3663 | if (rc && rc != -EAGAIN) { |
3664 | /* online is set iff link is online && reset succeeded */ | |
3665 | if (online) | |
3666 | *online = false; | |
9dadd45b TH |
3667 | ata_link_printk(link, KERN_ERR, |
3668 | "COMRESET failed (errno=%d)\n", rc); | |
0cbf0711 | 3669 | } |
b6103f6d TH |
3670 | DPRINTK("EXIT, rc=%d\n", rc); |
3671 | return rc; | |
3672 | } | |
3673 | ||
57c9efdf TH |
3674 | /** |
3675 | * sata_std_hardreset - COMRESET w/o waiting or classification | |
3676 | * @link: link to reset | |
3677 | * @class: resulting class of attached device | |
3678 | * @deadline: deadline jiffies for the operation | |
3679 | * | |
3680 | * Standard SATA COMRESET w/o waiting or classification. | |
3681 | * | |
3682 | * LOCKING: | |
3683 | * Kernel thread context (may sleep) | |
3684 | * | |
3685 | * RETURNS: | |
3686 | * 0 if link offline, -EAGAIN if link online, -errno on errors. | |
3687 | */ | |
3688 | int sata_std_hardreset(struct ata_link *link, unsigned int *class, | |
3689 | unsigned long deadline) | |
3690 | { | |
3691 | const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); | |
3692 | bool online; | |
3693 | int rc; | |
3694 | ||
3695 | /* do hardreset */ | |
3696 | rc = sata_link_hardreset(link, timing, deadline, &online, NULL); | |
57c9efdf TH |
3697 | return online ? -EAGAIN : rc; |
3698 | } | |
3699 | ||
c2bd5804 | 3700 | /** |
203c75b8 | 3701 | * ata_std_postreset - standard postreset callback |
cc0680a5 | 3702 | * @link: the target ata_link |
c2bd5804 TH |
3703 | * @classes: classes of attached devices |
3704 | * | |
3705 | * This function is invoked after a successful reset. Note that | |
3706 | * the device might have been reset more than once using | |
3707 | * different reset methods before postreset is invoked. | |
c2bd5804 | 3708 | * |
c2bd5804 TH |
3709 | * LOCKING: |
3710 | * Kernel thread context (may sleep) | |
3711 | */ | |
203c75b8 | 3712 | void ata_std_postreset(struct ata_link *link, unsigned int *classes) |
c2bd5804 | 3713 | { |
f046519f TH |
3714 | u32 serror; |
3715 | ||
c2bd5804 TH |
3716 | DPRINTK("ENTER\n"); |
3717 | ||
f046519f TH |
3718 | /* reset complete, clear SError */ |
3719 | if (!sata_scr_read(link, SCR_ERROR, &serror)) | |
3720 | sata_scr_write(link, SCR_ERROR, serror); | |
3721 | ||
c2bd5804 | 3722 | /* print link status */ |
936fd732 | 3723 | sata_print_link_status(link); |
c2bd5804 | 3724 | |
c2bd5804 TH |
3725 | DPRINTK("EXIT\n"); |
3726 | } | |
3727 | ||
623a3128 TH |
3728 | /** |
3729 | * ata_dev_same_device - Determine whether new ID matches configured device | |
623a3128 TH |
3730 | * @dev: device to compare against |
3731 | * @new_class: class of the new device | |
3732 | * @new_id: IDENTIFY page of the new device | |
3733 | * | |
3734 | * Compare @new_class and @new_id against @dev and determine | |
3735 | * whether @dev is the device indicated by @new_class and | |
3736 | * @new_id. | |
3737 | * | |
3738 | * LOCKING: | |
3739 | * None. | |
3740 | * | |
3741 | * RETURNS: | |
3742 | * 1 if @dev matches @new_class and @new_id, 0 otherwise. | |
3743 | */ | |
3373efd8 TH |
3744 | static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, |
3745 | const u16 *new_id) | |
623a3128 TH |
3746 | { |
3747 | const u16 *old_id = dev->id; | |
a0cf733b TH |
3748 | unsigned char model[2][ATA_ID_PROD_LEN + 1]; |
3749 | unsigned char serial[2][ATA_ID_SERNO_LEN + 1]; | |
623a3128 TH |
3750 | |
3751 | if (dev->class != new_class) { | |
f15a1daf TH |
3752 | ata_dev_printk(dev, KERN_INFO, "class mismatch %d != %d\n", |
3753 | dev->class, new_class); | |
623a3128 TH |
3754 | return 0; |
3755 | } | |
3756 | ||
a0cf733b TH |
3757 | ata_id_c_string(old_id, model[0], ATA_ID_PROD, sizeof(model[0])); |
3758 | ata_id_c_string(new_id, model[1], ATA_ID_PROD, sizeof(model[1])); | |
3759 | ata_id_c_string(old_id, serial[0], ATA_ID_SERNO, sizeof(serial[0])); | |
3760 | ata_id_c_string(new_id, serial[1], ATA_ID_SERNO, sizeof(serial[1])); | |
623a3128 TH |
3761 | |
3762 | if (strcmp(model[0], model[1])) { | |
f15a1daf TH |
3763 | ata_dev_printk(dev, KERN_INFO, "model number mismatch " |
3764 | "'%s' != '%s'\n", model[0], model[1]); | |
623a3128 TH |
3765 | return 0; |
3766 | } | |
3767 | ||
3768 | if (strcmp(serial[0], serial[1])) { | |
f15a1daf TH |
3769 | ata_dev_printk(dev, KERN_INFO, "serial number mismatch " |
3770 | "'%s' != '%s'\n", serial[0], serial[1]); | |
623a3128 TH |
3771 | return 0; |
3772 | } | |
3773 | ||
623a3128 TH |
3774 | return 1; |
3775 | } | |
3776 | ||
3777 | /** | |
fe30911b | 3778 | * ata_dev_reread_id - Re-read IDENTIFY data |
3fae450c | 3779 | * @dev: target ATA device |
bff04647 | 3780 | * @readid_flags: read ID flags |
623a3128 TH |
3781 | * |
3782 | * Re-read IDENTIFY page and make sure @dev is still attached to | |
3783 | * the port. | |
3784 | * | |
3785 | * LOCKING: | |
3786 | * Kernel thread context (may sleep) | |
3787 | * | |
3788 | * RETURNS: | |
3789 | * 0 on success, negative errno otherwise | |
3790 | */ | |
fe30911b | 3791 | int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags) |
623a3128 | 3792 | { |
5eb45c02 | 3793 | unsigned int class = dev->class; |
9af5c9c9 | 3794 | u16 *id = (void *)dev->link->ap->sector_buf; |
623a3128 TH |
3795 | int rc; |
3796 | ||
fe635c7e | 3797 | /* read ID data */ |
bff04647 | 3798 | rc = ata_dev_read_id(dev, &class, readid_flags, id); |
623a3128 | 3799 | if (rc) |
fe30911b | 3800 | return rc; |
623a3128 TH |
3801 | |
3802 | /* is the device still there? */ | |
fe30911b TH |
3803 | if (!ata_dev_same_device(dev, class, id)) |
3804 | return -ENODEV; | |
623a3128 | 3805 | |
fe635c7e | 3806 | memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS); |
fe30911b TH |
3807 | return 0; |
3808 | } | |
3809 | ||
3810 | /** | |
3811 | * ata_dev_revalidate - Revalidate ATA device | |
3812 | * @dev: device to revalidate | |
422c9daa | 3813 | * @new_class: new class code |
fe30911b TH |
3814 | * @readid_flags: read ID flags |
3815 | * | |
3816 | * Re-read IDENTIFY page, make sure @dev is still attached to the | |
3817 | * port and reconfigure it according to the new IDENTIFY page. | |
3818 | * | |
3819 | * LOCKING: | |
3820 | * Kernel thread context (may sleep) | |
3821 | * | |
3822 | * RETURNS: | |
3823 | * 0 on success, negative errno otherwise | |
3824 | */ | |
422c9daa TH |
3825 | int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class, |
3826 | unsigned int readid_flags) | |
fe30911b | 3827 | { |
6ddcd3b0 | 3828 | u64 n_sectors = dev->n_sectors; |
fe30911b TH |
3829 | int rc; |
3830 | ||
3831 | if (!ata_dev_enabled(dev)) | |
3832 | return -ENODEV; | |
3833 | ||
422c9daa TH |
3834 | /* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */ |
3835 | if (ata_class_enabled(new_class) && | |
3836 | new_class != ATA_DEV_ATA && new_class != ATA_DEV_ATAPI) { | |
3837 | ata_dev_printk(dev, KERN_INFO, "class mismatch %u != %u\n", | |
3838 | dev->class, new_class); | |
3839 | rc = -ENODEV; | |
3840 | goto fail; | |
3841 | } | |
3842 | ||
fe30911b TH |
3843 | /* re-read ID */ |
3844 | rc = ata_dev_reread_id(dev, readid_flags); | |
3845 | if (rc) | |
3846 | goto fail; | |
623a3128 TH |
3847 | |
3848 | /* configure device according to the new ID */ | |
efdaedc4 | 3849 | rc = ata_dev_configure(dev); |
6ddcd3b0 TH |
3850 | if (rc) |
3851 | goto fail; | |
3852 | ||
3853 | /* verify n_sectors hasn't changed */ | |
b54eebd6 TH |
3854 | if (dev->class == ATA_DEV_ATA && n_sectors && |
3855 | dev->n_sectors != n_sectors) { | |
6ddcd3b0 TH |
3856 | ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch " |
3857 | "%llu != %llu\n", | |
3858 | (unsigned long long)n_sectors, | |
3859 | (unsigned long long)dev->n_sectors); | |
8270bec4 TH |
3860 | |
3861 | /* restore original n_sectors */ | |
3862 | dev->n_sectors = n_sectors; | |
3863 | ||
6ddcd3b0 TH |
3864 | rc = -ENODEV; |
3865 | goto fail; | |
3866 | } | |
3867 | ||
3868 | return 0; | |
623a3128 TH |
3869 | |
3870 | fail: | |
f15a1daf | 3871 | ata_dev_printk(dev, KERN_ERR, "revalidation failed (errno=%d)\n", rc); |
623a3128 TH |
3872 | return rc; |
3873 | } | |
3874 | ||
6919a0a6 AC |
3875 | struct ata_blacklist_entry { |
3876 | const char *model_num; | |
3877 | const char *model_rev; | |
3878 | unsigned long horkage; | |
3879 | }; | |
3880 | ||
3881 | static const struct ata_blacklist_entry ata_device_blacklist [] = { | |
3882 | /* Devices with DMA related problems under Linux */ | |
3883 | { "WDC AC11000H", NULL, ATA_HORKAGE_NODMA }, | |
3884 | { "WDC AC22100H", NULL, ATA_HORKAGE_NODMA }, | |
3885 | { "WDC AC32500H", NULL, ATA_HORKAGE_NODMA }, | |
3886 | { "WDC AC33100H", NULL, ATA_HORKAGE_NODMA }, | |
3887 | { "WDC AC31600H", NULL, ATA_HORKAGE_NODMA }, | |
3888 | { "WDC AC32100H", "24.09P07", ATA_HORKAGE_NODMA }, | |
3889 | { "WDC AC23200L", "21.10N21", ATA_HORKAGE_NODMA }, | |
3890 | { "Compaq CRD-8241B", NULL, ATA_HORKAGE_NODMA }, | |
3891 | { "CRD-8400B", NULL, ATA_HORKAGE_NODMA }, | |
3892 | { "CRD-8480B", NULL, ATA_HORKAGE_NODMA }, | |
3893 | { "CRD-8482B", NULL, ATA_HORKAGE_NODMA }, | |
3894 | { "CRD-84", NULL, ATA_HORKAGE_NODMA }, | |
3895 | { "SanDisk SDP3B", NULL, ATA_HORKAGE_NODMA }, | |
3896 | { "SanDisk SDP3B-64", NULL, ATA_HORKAGE_NODMA }, | |
3897 | { "SANYO CD-ROM CRD", NULL, ATA_HORKAGE_NODMA }, | |
3898 | { "HITACHI CDR-8", NULL, ATA_HORKAGE_NODMA }, | |
3899 | { "HITACHI CDR-8335", NULL, ATA_HORKAGE_NODMA }, | |
3900 | { "HITACHI CDR-8435", NULL, ATA_HORKAGE_NODMA }, | |
3901 | { "Toshiba CD-ROM XM-6202B", NULL, ATA_HORKAGE_NODMA }, | |
3902 | { "TOSHIBA CD-ROM XM-1702BC", NULL, ATA_HORKAGE_NODMA }, | |
3903 | { "CD-532E-A", NULL, ATA_HORKAGE_NODMA }, | |
3904 | { "E-IDE CD-ROM CR-840",NULL, ATA_HORKAGE_NODMA }, | |
3905 | { "CD-ROM Drive/F5A", NULL, ATA_HORKAGE_NODMA }, | |
3906 | { "WPI CDD-820", NULL, ATA_HORKAGE_NODMA }, | |
3907 | { "SAMSUNG CD-ROM SC-148C", NULL, ATA_HORKAGE_NODMA }, | |
3908 | { "SAMSUNG CD-ROM SC", NULL, ATA_HORKAGE_NODMA }, | |
6919a0a6 AC |
3909 | { "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA }, |
3910 | { "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA }, | |
2dcb407e | 3911 | { "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA }, |
39f19886 | 3912 | { "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA }, |
3af9a77a | 3913 | /* Odd clown on sil3726/4726 PMPs */ |
50af2fa1 | 3914 | { "Config Disk", NULL, ATA_HORKAGE_DISABLE }, |
6919a0a6 | 3915 | |
18d6e9d5 | 3916 | /* Weird ATAPI devices */ |
40a1d531 | 3917 | { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 }, |
18d6e9d5 | 3918 | |
6919a0a6 AC |
3919 | /* Devices we expect to fail diagnostics */ |
3920 | ||
3921 | /* Devices where NCQ should be avoided */ | |
3922 | /* NCQ is slow */ | |
2dcb407e | 3923 | { "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ }, |
459ad688 | 3924 | { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, }, |
09125ea6 TH |
3925 | /* http://thread.gmane.org/gmane.linux.ide/14907 */ |
3926 | { "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ }, | |
7acfaf30 | 3927 | /* NCQ is broken */ |
539cc7c7 | 3928 | { "Maxtor *", "BANC*", ATA_HORKAGE_NONCQ }, |
0e3dbc01 | 3929 | { "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ }, |
da6f0ec2 | 3930 | { "ST380817AS", "3.42", ATA_HORKAGE_NONCQ }, |
e41bd3e8 | 3931 | { "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ }, |
539cc7c7 | 3932 | |
36e337d0 RH |
3933 | /* Blacklist entries taken from Silicon Image 3124/3132 |
3934 | Windows driver .inf file - also several Linux problem reports */ | |
3935 | { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, }, | |
3936 | { "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, }, | |
3937 | { "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, }, | |
6919a0a6 | 3938 | |
16c55b03 TH |
3939 | /* devices which puke on READ_NATIVE_MAX */ |
3940 | { "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA, }, | |
3941 | { "WDC WD3200JD-00KLB0", "WD-WCAMR1130137", ATA_HORKAGE_BROKEN_HPA }, | |
3942 | { "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA }, | |
3943 | { "MAXTOR 6L080L4", "A93.0500", ATA_HORKAGE_BROKEN_HPA }, | |
6919a0a6 | 3944 | |
93328e11 AC |
3945 | /* Devices which report 1 sector over size HPA */ |
3946 | { "ST340823A", NULL, ATA_HORKAGE_HPA_SIZE, }, | |
3947 | { "ST320413A", NULL, ATA_HORKAGE_HPA_SIZE, }, | |
b152fcd3 | 3948 | { "ST310211A", NULL, ATA_HORKAGE_HPA_SIZE, }, |
93328e11 | 3949 | |
6bbfd53d AC |
3950 | /* Devices which get the IVB wrong */ |
3951 | { "QUANTUM FIREBALLlct10 05", "A03.0900", ATA_HORKAGE_IVB, }, | |
a79067e5 AC |
3952 | /* Maybe we should just blacklist TSSTcorp... */ |
3953 | { "TSSTcorp CDDVDW SH-S202H", "SB00", ATA_HORKAGE_IVB, }, | |
3954 | { "TSSTcorp CDDVDW SH-S202H", "SB01", ATA_HORKAGE_IVB, }, | |
6bbfd53d | 3955 | { "TSSTcorp CDDVDW SH-S202J", "SB00", ATA_HORKAGE_IVB, }, |
e9f33406 PM |
3956 | { "TSSTcorp CDDVDW SH-S202J", "SB01", ATA_HORKAGE_IVB, }, |
3957 | { "TSSTcorp CDDVDW SH-S202N", "SB00", ATA_HORKAGE_IVB, }, | |
3958 | { "TSSTcorp CDDVDW SH-S202N", "SB01", ATA_HORKAGE_IVB, }, | |
6bbfd53d | 3959 | |
6919a0a6 AC |
3960 | /* End Marker */ |
3961 | { } | |
1da177e4 | 3962 | }; |
2e9edbf8 | 3963 | |
741b7763 | 3964 | static int strn_pattern_cmp(const char *patt, const char *name, int wildchar) |
539cc7c7 JG |
3965 | { |
3966 | const char *p; | |
3967 | int len; | |
3968 | ||
3969 | /* | |
3970 | * check for trailing wildcard: *\0 | |
3971 | */ | |
3972 | p = strchr(patt, wildchar); | |
3973 | if (p && ((*(p + 1)) == 0)) | |
3974 | len = p - patt; | |
317b50b8 | 3975 | else { |
539cc7c7 | 3976 | len = strlen(name); |
317b50b8 AP |
3977 | if (!len) { |
3978 | if (!*patt) | |
3979 | return 0; | |
3980 | return -1; | |
3981 | } | |
3982 | } | |
539cc7c7 JG |
3983 | |
3984 | return strncmp(patt, name, len); | |
3985 | } | |
3986 | ||
75683fe7 | 3987 | static unsigned long ata_dev_blacklisted(const struct ata_device *dev) |
1da177e4 | 3988 | { |
8bfa79fc TH |
3989 | unsigned char model_num[ATA_ID_PROD_LEN + 1]; |
3990 | unsigned char model_rev[ATA_ID_FW_REV_LEN + 1]; | |
6919a0a6 | 3991 | const struct ata_blacklist_entry *ad = ata_device_blacklist; |
3a778275 | 3992 | |
8bfa79fc TH |
3993 | ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num)); |
3994 | ata_id_c_string(dev->id, model_rev, ATA_ID_FW_REV, sizeof(model_rev)); | |
1da177e4 | 3995 | |
6919a0a6 | 3996 | while (ad->model_num) { |
539cc7c7 | 3997 | if (!strn_pattern_cmp(ad->model_num, model_num, '*')) { |
6919a0a6 AC |
3998 | if (ad->model_rev == NULL) |
3999 | return ad->horkage; | |
539cc7c7 | 4000 | if (!strn_pattern_cmp(ad->model_rev, model_rev, '*')) |
6919a0a6 | 4001 | return ad->horkage; |
f4b15fef | 4002 | } |
6919a0a6 | 4003 | ad++; |
f4b15fef | 4004 | } |
1da177e4 LT |
4005 | return 0; |
4006 | } | |
4007 | ||
6919a0a6 AC |
4008 | static int ata_dma_blacklisted(const struct ata_device *dev) |
4009 | { | |
4010 | /* We don't support polling DMA. | |
4011 | * DMA blacklist those ATAPI devices with CDB-intr (and use PIO) | |
4012 | * if the LLDD handles only interrupts in the HSM_ST_LAST state. | |
4013 | */ | |
9af5c9c9 | 4014 | if ((dev->link->ap->flags & ATA_FLAG_PIO_POLLING) && |
6919a0a6 AC |
4015 | (dev->flags & ATA_DFLAG_CDB_INTR)) |
4016 | return 1; | |
75683fe7 | 4017 | return (dev->horkage & ATA_HORKAGE_NODMA) ? 1 : 0; |
6919a0a6 AC |
4018 | } |
4019 | ||
6bbfd53d AC |
4020 | /** |
4021 | * ata_is_40wire - check drive side detection | |
4022 | * @dev: device | |
4023 | * | |
4024 | * Perform drive side detection decoding, allowing for device vendors | |
4025 | * who can't follow the documentation. | |
4026 | */ | |
4027 | ||
4028 | static int ata_is_40wire(struct ata_device *dev) | |
4029 | { | |
4030 | if (dev->horkage & ATA_HORKAGE_IVB) | |
4031 | return ata_drive_40wire_relaxed(dev->id); | |
4032 | return ata_drive_40wire(dev->id); | |
4033 | } | |
4034 | ||
15a5551c AC |
4035 | /** |
4036 | * cable_is_40wire - 40/80/SATA decider | |
4037 | * @ap: port to consider | |
4038 | * | |
4039 | * This function encapsulates the policy for speed management | |
4040 | * in one place. At the moment we don't cache the result but | |
4041 | * there is a good case for setting ap->cbl to the result when | |
4042 | * we are called with unknown cables (and figuring out if it | |
4043 | * impacts hotplug at all). | |
4044 | * | |
4045 | * Return 1 if the cable appears to be 40 wire. | |
4046 | */ | |
4047 | ||
4048 | static int cable_is_40wire(struct ata_port *ap) | |
4049 | { | |
4050 | struct ata_link *link; | |
4051 | struct ata_device *dev; | |
4052 | ||
4053 | /* If the controller thinks we are 40 wire, we are */ | |
4054 | if (ap->cbl == ATA_CBL_PATA40) | |
4055 | return 1; | |
4056 | /* If the controller thinks we are 80 wire, we are */ | |
4057 | if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA) | |
4058 | return 0; | |
f792068e AC |
4059 | /* If the system is known to be 40 wire short cable (eg laptop), |
4060 | then we allow 80 wire modes even if the drive isn't sure */ | |
4061 | if (ap->cbl == ATA_CBL_PATA40_SHORT) | |
4062 | return 0; | |
15a5551c AC |
4063 | /* If the controller doesn't know we scan |
4064 | ||
4065 | - Note: We look for all 40 wire detects at this point. | |
4066 | Any 80 wire detect is taken to be 80 wire cable | |
4067 | because | |
4068 | - In many setups only the one drive (slave if present) | |
4069 | will give a valid detect | |
4070 | - If you have a non detect capable drive you don't | |
4071 | want it to colour the choice | |
4072 | */ | |
4073 | ata_port_for_each_link(link, ap) { | |
4074 | ata_link_for_each_dev(dev, link) { | |
4075 | if (!ata_is_40wire(dev)) | |
4076 | return 0; | |
4077 | } | |
4078 | } | |
4079 | return 1; | |
4080 | } | |
4081 | ||
a6d5a51c TH |
4082 | /** |
4083 | * ata_dev_xfermask - Compute supported xfermask of the given device | |
a6d5a51c TH |
4084 | * @dev: Device to compute xfermask for |
4085 | * | |
acf356b1 TH |
4086 | * Compute supported xfermask of @dev and store it in |
4087 | * dev->*_mask. This function is responsible for applying all | |
4088 | * known limits including host controller limits, device | |
4089 | * blacklist, etc... | |
a6d5a51c TH |
4090 | * |
4091 | * LOCKING: | |
4092 | * None. | |
a6d5a51c | 4093 | */ |
3373efd8 | 4094 | static void ata_dev_xfermask(struct ata_device *dev) |
1da177e4 | 4095 | { |
9af5c9c9 TH |
4096 | struct ata_link *link = dev->link; |
4097 | struct ata_port *ap = link->ap; | |
cca3974e | 4098 | struct ata_host *host = ap->host; |
a6d5a51c | 4099 | unsigned long xfer_mask; |
1da177e4 | 4100 | |
37deecb5 | 4101 | /* controller modes available */ |
565083e1 TH |
4102 | xfer_mask = ata_pack_xfermask(ap->pio_mask, |
4103 | ap->mwdma_mask, ap->udma_mask); | |
4104 | ||
8343f889 | 4105 | /* drive modes available */ |
37deecb5 TH |
4106 | xfer_mask &= ata_pack_xfermask(dev->pio_mask, |
4107 | dev->mwdma_mask, dev->udma_mask); | |
4108 | xfer_mask &= ata_id_xfermask(dev->id); | |
565083e1 | 4109 | |
b352e57d AC |
4110 | /* |
4111 | * CFA Advanced TrueIDE timings are not allowed on a shared | |
4112 | * cable | |
4113 | */ | |
4114 | if (ata_dev_pair(dev)) { | |
4115 | /* No PIO5 or PIO6 */ | |
4116 | xfer_mask &= ~(0x03 << (ATA_SHIFT_PIO + 5)); | |
4117 | /* No MWDMA3 or MWDMA 4 */ | |
4118 | xfer_mask &= ~(0x03 << (ATA_SHIFT_MWDMA + 3)); | |
4119 | } | |
4120 | ||
37deecb5 TH |
4121 | if (ata_dma_blacklisted(dev)) { |
4122 | xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); | |
f15a1daf TH |
4123 | ata_dev_printk(dev, KERN_WARNING, |
4124 | "device is on DMA blacklist, disabling DMA\n"); | |
37deecb5 | 4125 | } |
a6d5a51c | 4126 | |
14d66ab7 | 4127 | if ((host->flags & ATA_HOST_SIMPLEX) && |
2dcb407e | 4128 | host->simplex_claimed && host->simplex_claimed != ap) { |
37deecb5 TH |
4129 | xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); |
4130 | ata_dev_printk(dev, KERN_WARNING, "simplex DMA is claimed by " | |
4131 | "other device, disabling DMA\n"); | |
5444a6f4 | 4132 | } |
565083e1 | 4133 | |
e424675f JG |
4134 | if (ap->flags & ATA_FLAG_NO_IORDY) |
4135 | xfer_mask &= ata_pio_mask_no_iordy(dev); | |
4136 | ||
5444a6f4 | 4137 | if (ap->ops->mode_filter) |
a76b62ca | 4138 | xfer_mask = ap->ops->mode_filter(dev, xfer_mask); |
5444a6f4 | 4139 | |
8343f889 RH |
4140 | /* Apply cable rule here. Don't apply it early because when |
4141 | * we handle hot plug the cable type can itself change. | |
4142 | * Check this last so that we know if the transfer rate was | |
4143 | * solely limited by the cable. | |
4144 | * Unknown or 80 wire cables reported host side are checked | |
4145 | * drive side as well. Cases where we know a 40wire cable | |
4146 | * is used safely for 80 are not checked here. | |
4147 | */ | |
4148 | if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA)) | |
4149 | /* UDMA/44 or higher would be available */ | |
15a5551c | 4150 | if (cable_is_40wire(ap)) { |
2dcb407e | 4151 | ata_dev_printk(dev, KERN_WARNING, |
8343f889 RH |
4152 | "limited to UDMA/33 due to 40-wire cable\n"); |
4153 | xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); | |
4154 | } | |
4155 | ||
565083e1 TH |
4156 | ata_unpack_xfermask(xfer_mask, &dev->pio_mask, |
4157 | &dev->mwdma_mask, &dev->udma_mask); | |
1da177e4 LT |
4158 | } |
4159 | ||
1da177e4 LT |
4160 | /** |
4161 | * ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command | |
1da177e4 LT |
4162 | * @dev: Device to which command will be sent |
4163 | * | |
780a87f7 JG |
4164 | * Issue SET FEATURES - XFER MODE command to device @dev |
4165 | * on port @ap. | |
4166 | * | |
1da177e4 | 4167 | * LOCKING: |
0cba632b | 4168 | * PCI/etc. bus probe sem. |
83206a29 TH |
4169 | * |
4170 | * RETURNS: | |
4171 | * 0 on success, AC_ERR_* mask otherwise. | |
1da177e4 LT |
4172 | */ |
4173 | ||
3373efd8 | 4174 | static unsigned int ata_dev_set_xfermode(struct ata_device *dev) |
1da177e4 | 4175 | { |
a0123703 | 4176 | struct ata_taskfile tf; |
83206a29 | 4177 | unsigned int err_mask; |
1da177e4 LT |
4178 | |
4179 | /* set up set-features taskfile */ | |
4180 | DPRINTK("set features - xfer mode\n"); | |
4181 | ||
464cf177 TH |
4182 | /* Some controllers and ATAPI devices show flaky interrupt |
4183 | * behavior after setting xfer mode. Use polling instead. | |
4184 | */ | |
3373efd8 | 4185 | ata_tf_init(dev, &tf); |
a0123703 TH |
4186 | tf.command = ATA_CMD_SET_FEATURES; |
4187 | tf.feature = SETFEATURES_XFER; | |
464cf177 | 4188 | tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_POLLING; |
a0123703 | 4189 | tf.protocol = ATA_PROT_NODATA; |
b9f8ab2d | 4190 | /* If we are using IORDY we must send the mode setting command */ |
11b7becc JG |
4191 | if (ata_pio_need_iordy(dev)) |
4192 | tf.nsect = dev->xfer_mode; | |
b9f8ab2d AC |
4193 | /* If the device has IORDY and the controller does not - turn it off */ |
4194 | else if (ata_id_has_iordy(dev->id)) | |
11b7becc | 4195 | tf.nsect = 0x01; |
b9f8ab2d AC |
4196 | else /* In the ancient relic department - skip all of this */ |
4197 | return 0; | |
1da177e4 | 4198 | |
2b789108 | 4199 | err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); |
9f45cbd3 KCA |
4200 | |
4201 | DPRINTK("EXIT, err_mask=%x\n", err_mask); | |
4202 | return err_mask; | |
4203 | } | |
9f45cbd3 | 4204 | /** |
218f3d30 | 4205 | * ata_dev_set_feature - Issue SET FEATURES - SATA FEATURES |
9f45cbd3 KCA |
4206 | * @dev: Device to which command will be sent |
4207 | * @enable: Whether to enable or disable the feature | |
218f3d30 | 4208 | * @feature: The sector count represents the feature to set |
9f45cbd3 KCA |
4209 | * |
4210 | * Issue SET FEATURES - SATA FEATURES command to device @dev | |
218f3d30 | 4211 | * on port @ap with sector count |
9f45cbd3 KCA |
4212 | * |
4213 | * LOCKING: | |
4214 | * PCI/etc. bus probe sem. | |
4215 | * | |
4216 | * RETURNS: | |
4217 | * 0 on success, AC_ERR_* mask otherwise. | |
4218 | */ | |
218f3d30 JG |
4219 | static unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, |
4220 | u8 feature) | |
9f45cbd3 KCA |
4221 | { |
4222 | struct ata_taskfile tf; | |
4223 | unsigned int err_mask; | |
4224 | ||
4225 | /* set up set-features taskfile */ | |
4226 | DPRINTK("set features - SATA features\n"); | |
4227 | ||
4228 | ata_tf_init(dev, &tf); | |
4229 | tf.command = ATA_CMD_SET_FEATURES; | |
4230 | tf.feature = enable; | |
4231 | tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; | |
4232 | tf.protocol = ATA_PROT_NODATA; | |
218f3d30 | 4233 | tf.nsect = feature; |
9f45cbd3 | 4234 | |
2b789108 | 4235 | err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); |
1da177e4 | 4236 | |
83206a29 TH |
4237 | DPRINTK("EXIT, err_mask=%x\n", err_mask); |
4238 | return err_mask; | |
1da177e4 LT |
4239 | } |
4240 | ||
8bf62ece AL |
4241 | /** |
4242 | * ata_dev_init_params - Issue INIT DEV PARAMS command | |
8bf62ece | 4243 | * @dev: Device to which command will be sent |
e2a7f77a RD |
4244 | * @heads: Number of heads (taskfile parameter) |
4245 | * @sectors: Number of sectors (taskfile parameter) | |
8bf62ece AL |
4246 | * |
4247 | * LOCKING: | |
6aff8f1f TH |
4248 | * Kernel thread context (may sleep) |
4249 | * | |
4250 | * RETURNS: | |
4251 | * 0 on success, AC_ERR_* mask otherwise. | |
8bf62ece | 4252 | */ |
3373efd8 TH |
4253 | static unsigned int ata_dev_init_params(struct ata_device *dev, |
4254 | u16 heads, u16 sectors) | |
8bf62ece | 4255 | { |
a0123703 | 4256 | struct ata_taskfile tf; |
6aff8f1f | 4257 | unsigned int err_mask; |
8bf62ece AL |
4258 | |
4259 | /* Number of sectors per track 1-255. Number of heads 1-16 */ | |
4260 | if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16) | |
00b6f5e9 | 4261 | return AC_ERR_INVALID; |
8bf62ece AL |
4262 | |
4263 | /* set up init dev params taskfile */ | |
4264 | DPRINTK("init dev params \n"); | |
4265 | ||
3373efd8 | 4266 | ata_tf_init(dev, &tf); |
a0123703 TH |
4267 | tf.command = ATA_CMD_INIT_DEV_PARAMS; |
4268 | tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; | |
4269 | tf.protocol = ATA_PROT_NODATA; | |
4270 | tf.nsect = sectors; | |
4271 | tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ | |
8bf62ece | 4272 | |
2b789108 | 4273 | err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); |
18b2466c AC |
4274 | /* A clean abort indicates an original or just out of spec drive |
4275 | and we should continue as we issue the setup based on the | |
4276 | drive reported working geometry */ | |
4277 | if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED)) | |
4278 | err_mask = 0; | |
8bf62ece | 4279 | |
6aff8f1f TH |
4280 | DPRINTK("EXIT, err_mask=%x\n", err_mask); |
4281 | return err_mask; | |
8bf62ece AL |
4282 | } |
4283 | ||
1da177e4 | 4284 | /** |
0cba632b JG |
4285 | * ata_sg_clean - Unmap DMA memory associated with command |
4286 | * @qc: Command containing DMA memory to be released | |
4287 | * | |
4288 | * Unmap all mapped DMA memory associated with this command. | |
1da177e4 LT |
4289 | * |
4290 | * LOCKING: | |
cca3974e | 4291 | * spin_lock_irqsave(host lock) |
1da177e4 | 4292 | */ |
70e6ad0c | 4293 | void ata_sg_clean(struct ata_queued_cmd *qc) |
1da177e4 LT |
4294 | { |
4295 | struct ata_port *ap = qc->ap; | |
ff2aeb1e | 4296 | struct scatterlist *sg = qc->sg; |
1da177e4 LT |
4297 | int dir = qc->dma_dir; |
4298 | ||
a4631474 | 4299 | WARN_ON(sg == NULL); |
1da177e4 | 4300 | |
dde20207 | 4301 | VPRINTK("unmapping %u sg elements\n", qc->n_elem); |
1da177e4 | 4302 | |
dde20207 JB |
4303 | if (qc->n_elem) |
4304 | dma_unmap_sg(ap->dev, sg, qc->n_elem, dir); | |
1da177e4 LT |
4305 | |
4306 | qc->flags &= ~ATA_QCFLAG_DMAMAP; | |
ff2aeb1e | 4307 | qc->sg = NULL; |
1da177e4 LT |
4308 | } |
4309 | ||
1da177e4 | 4310 | /** |
5895ef9a | 4311 | * atapi_check_dma - Check whether ATAPI DMA can be supported |
1da177e4 LT |
4312 | * @qc: Metadata associated with taskfile to check |
4313 | * | |
780a87f7 JG |
4314 | * Allow low-level driver to filter ATA PACKET commands, returning |
4315 | * a status indicating whether or not it is OK to use DMA for the | |
4316 | * supplied PACKET command. | |
4317 | * | |
1da177e4 | 4318 | * LOCKING: |
624d5c51 TH |
4319 | * spin_lock_irqsave(host lock) |
4320 | * | |
4321 | * RETURNS: 0 when ATAPI DMA can be used | |
4322 | * nonzero otherwise | |
4323 | */ | |
5895ef9a | 4324 | int atapi_check_dma(struct ata_queued_cmd *qc) |
624d5c51 TH |
4325 | { |
4326 | struct ata_port *ap = qc->ap; | |
71601958 | 4327 | |
624d5c51 TH |
4328 | /* Don't allow DMA if it isn't multiple of 16 bytes. Quite a |
4329 | * few ATAPI devices choke on such DMA requests. | |
4330 | */ | |
4331 | if (unlikely(qc->nbytes & 15)) | |
4332 | return 1; | |
e2cec771 | 4333 | |
624d5c51 TH |
4334 | if (ap->ops->check_atapi_dma) |
4335 | return ap->ops->check_atapi_dma(qc); | |
e2cec771 | 4336 | |
624d5c51 TH |
4337 | return 0; |
4338 | } | |
1da177e4 | 4339 | |
624d5c51 TH |
4340 | /** |
4341 | * ata_std_qc_defer - Check whether a qc needs to be deferred | |
4342 | * @qc: ATA command in question | |
4343 | * | |
4344 | * Non-NCQ commands cannot run with any other command, NCQ or | |
4345 | * not. As upper layer only knows the queue depth, we are | |
4346 | * responsible for maintaining exclusion. This function checks | |
4347 | * whether a new command @qc can be issued. | |
4348 | * | |
4349 | * LOCKING: | |
4350 | * spin_lock_irqsave(host lock) | |
4351 | * | |
4352 | * RETURNS: | |
4353 | * ATA_DEFER_* if deferring is needed, 0 otherwise. | |
4354 | */ | |
4355 | int ata_std_qc_defer(struct ata_queued_cmd *qc) | |
4356 | { | |
4357 | struct ata_link *link = qc->dev->link; | |
e2cec771 | 4358 | |
624d5c51 TH |
4359 | if (qc->tf.protocol == ATA_PROT_NCQ) { |
4360 | if (!ata_tag_valid(link->active_tag)) | |
4361 | return 0; | |
4362 | } else { | |
4363 | if (!ata_tag_valid(link->active_tag) && !link->sactive) | |
4364 | return 0; | |
4365 | } | |
e2cec771 | 4366 | |
624d5c51 TH |
4367 | return ATA_DEFER_LINK; |
4368 | } | |
6912ccd5 | 4369 | |
624d5c51 | 4370 | void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } |
1da177e4 | 4371 | |
624d5c51 TH |
4372 | /** |
4373 | * ata_sg_init - Associate command with scatter-gather table. | |
4374 | * @qc: Command to be associated | |
4375 | * @sg: Scatter-gather table. | |
4376 | * @n_elem: Number of elements in s/g table. | |
4377 | * | |
4378 | * Initialize the data-related elements of queued_cmd @qc | |
4379 | * to point to a scatter-gather table @sg, containing @n_elem | |
4380 | * elements. | |
4381 | * | |
4382 | * LOCKING: | |
4383 | * spin_lock_irqsave(host lock) | |
4384 | */ | |
4385 | void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, | |
4386 | unsigned int n_elem) | |
4387 | { | |
4388 | qc->sg = sg; | |
4389 | qc->n_elem = n_elem; | |
4390 | qc->cursg = qc->sg; | |
4391 | } | |
bb5cb290 | 4392 | |
624d5c51 TH |
4393 | /** |
4394 | * ata_sg_setup - DMA-map the scatter-gather table associated with a command. | |
4395 | * @qc: Command with scatter-gather table to be mapped. | |
4396 | * | |
4397 | * DMA-map the scatter-gather table associated with queued_cmd @qc. | |
4398 | * | |
4399 | * LOCKING: | |
4400 | * spin_lock_irqsave(host lock) | |
4401 | * | |
4402 | * RETURNS: | |
4403 | * Zero on success, negative on error. | |
4404 | * | |
4405 | */ | |
4406 | static int ata_sg_setup(struct ata_queued_cmd *qc) | |
4407 | { | |
4408 | struct ata_port *ap = qc->ap; | |
4409 | unsigned int n_elem; | |
1da177e4 | 4410 | |
624d5c51 | 4411 | VPRINTK("ENTER, ata%u\n", ap->print_id); |
e2cec771 | 4412 | |
624d5c51 TH |
4413 | n_elem = dma_map_sg(ap->dev, qc->sg, qc->n_elem, qc->dma_dir); |
4414 | if (n_elem < 1) | |
4415 | return -1; | |
bb5cb290 | 4416 | |
624d5c51 | 4417 | DPRINTK("%d sg elements mapped\n", n_elem); |
bb5cb290 | 4418 | |
624d5c51 TH |
4419 | qc->n_elem = n_elem; |
4420 | qc->flags |= ATA_QCFLAG_DMAMAP; | |
1da177e4 | 4421 | |
624d5c51 | 4422 | return 0; |
1da177e4 LT |
4423 | } |
4424 | ||
624d5c51 TH |
4425 | /** |
4426 | * swap_buf_le16 - swap halves of 16-bit words in place | |
4427 | * @buf: Buffer to swap | |
4428 | * @buf_words: Number of 16-bit words in buffer. | |
4429 | * | |
4430 | * Swap halves of 16-bit words if needed to convert from | |
4431 | * little-endian byte order to native cpu byte order, or | |
4432 | * vice-versa. | |
4433 | * | |
4434 | * LOCKING: | |
4435 | * Inherited from caller. | |
4436 | */ | |
4437 | void swap_buf_le16(u16 *buf, unsigned int buf_words) | |
8061f5f0 | 4438 | { |
624d5c51 TH |
4439 | #ifdef __BIG_ENDIAN |
4440 | unsigned int i; | |
8061f5f0 | 4441 | |
624d5c51 TH |
4442 | for (i = 0; i < buf_words; i++) |
4443 | buf[i] = le16_to_cpu(buf[i]); | |
4444 | #endif /* __BIG_ENDIAN */ | |
8061f5f0 TH |
4445 | } |
4446 | ||
1da177e4 LT |
4447 | /** |
4448 | * ata_qc_new - Request an available ATA command, for queueing | |
4449 | * @ap: Port associated with device @dev | |
4450 | * @dev: Device from whom we request an available command structure | |
4451 | * | |
4452 | * LOCKING: | |
0cba632b | 4453 | * None. |
1da177e4 LT |
4454 | */ |
4455 | ||
4456 | static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) | |
4457 | { | |
4458 | struct ata_queued_cmd *qc = NULL; | |
4459 | unsigned int i; | |
4460 | ||
e3180499 | 4461 | /* no command while frozen */ |
b51e9e5d | 4462 | if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) |
e3180499 TH |
4463 | return NULL; |
4464 | ||
2ab7db1f TH |
4465 | /* the last tag is reserved for internal command. */ |
4466 | for (i = 0; i < ATA_MAX_QUEUE - 1; i++) | |
6cec4a39 | 4467 | if (!test_and_set_bit(i, &ap->qc_allocated)) { |
f69499f4 | 4468 | qc = __ata_qc_from_tag(ap, i); |
1da177e4 LT |
4469 | break; |
4470 | } | |
4471 | ||
4472 | if (qc) | |
4473 | qc->tag = i; | |
4474 | ||
4475 | return qc; | |
4476 | } | |
4477 | ||
4478 | /** | |
4479 | * ata_qc_new_init - Request an available ATA command, and initialize it | |
1da177e4 LT |
4480 | * @dev: Device from whom we request an available command structure |
4481 | * | |
4482 | * LOCKING: | |
0cba632b | 4483 | * None. |
1da177e4 LT |
4484 | */ |
4485 | ||
3373efd8 | 4486 | struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) |
1da177e4 | 4487 | { |
9af5c9c9 | 4488 | struct ata_port *ap = dev->link->ap; |
1da177e4 LT |
4489 | struct ata_queued_cmd *qc; |
4490 | ||
4491 | qc = ata_qc_new(ap); | |
4492 | if (qc) { | |
1da177e4 LT |
4493 | qc->scsicmd = NULL; |
4494 | qc->ap = ap; | |
4495 | qc->dev = dev; | |
1da177e4 | 4496 | |
2c13b7ce | 4497 | ata_qc_reinit(qc); |
1da177e4 LT |
4498 | } |
4499 | ||
4500 | return qc; | |
4501 | } | |
4502 | ||
1da177e4 LT |
4503 | /** |
4504 | * ata_qc_free - free unused ata_queued_cmd | |
4505 | * @qc: Command to complete | |
4506 | * | |
4507 | * Designed to free unused ata_queued_cmd object | |
4508 | * in case something prevents using it. | |
4509 | * | |
4510 | * LOCKING: | |
cca3974e | 4511 | * spin_lock_irqsave(host lock) |
1da177e4 LT |
4512 | */ |
4513 | void ata_qc_free(struct ata_queued_cmd *qc) | |
4514 | { | |
4ba946e9 TH |
4515 | struct ata_port *ap = qc->ap; |
4516 | unsigned int tag; | |
4517 | ||
a4631474 | 4518 | WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ |
1da177e4 | 4519 | |
4ba946e9 TH |
4520 | qc->flags = 0; |
4521 | tag = qc->tag; | |
4522 | if (likely(ata_tag_valid(tag))) { | |
4ba946e9 | 4523 | qc->tag = ATA_TAG_POISON; |
6cec4a39 | 4524 | clear_bit(tag, &ap->qc_allocated); |
4ba946e9 | 4525 | } |
1da177e4 LT |
4526 | } |
4527 | ||
76014427 | 4528 | void __ata_qc_complete(struct ata_queued_cmd *qc) |
1da177e4 | 4529 | { |
dedaf2b0 | 4530 | struct ata_port *ap = qc->ap; |
9af5c9c9 | 4531 | struct ata_link *link = qc->dev->link; |
dedaf2b0 | 4532 | |
a4631474 TH |
4533 | WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ |
4534 | WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); | |
1da177e4 LT |
4535 | |
4536 | if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) | |
4537 | ata_sg_clean(qc); | |
4538 | ||
7401abf2 | 4539 | /* command should be marked inactive atomically with qc completion */ |
da917d69 | 4540 | if (qc->tf.protocol == ATA_PROT_NCQ) { |
9af5c9c9 | 4541 | link->sactive &= ~(1 << qc->tag); |
da917d69 TH |
4542 | if (!link->sactive) |
4543 | ap->nr_active_links--; | |
4544 | } else { | |
9af5c9c9 | 4545 | link->active_tag = ATA_TAG_POISON; |
da917d69 TH |
4546 | ap->nr_active_links--; |
4547 | } | |
4548 | ||
4549 | /* clear exclusive status */ | |
4550 | if (unlikely(qc->flags & ATA_QCFLAG_CLEAR_EXCL && | |
4551 | ap->excl_link == link)) | |
4552 | ap->excl_link = NULL; | |
7401abf2 | 4553 | |
3f3791d3 AL |
4554 | /* atapi: mark qc as inactive to prevent the interrupt handler |
4555 | * from completing the command twice later, before the error handler | |
4556 | * is called. (when rc != 0 and atapi request sense is needed) | |
4557 | */ | |
4558 | qc->flags &= ~ATA_QCFLAG_ACTIVE; | |
dedaf2b0 | 4559 | ap->qc_active &= ~(1 << qc->tag); |
3f3791d3 | 4560 | |
1da177e4 | 4561 | /* call completion callback */ |
77853bf2 | 4562 | qc->complete_fn(qc); |
1da177e4 LT |
4563 | } |
4564 | ||
39599a53 TH |
4565 | static void fill_result_tf(struct ata_queued_cmd *qc) |
4566 | { | |
4567 | struct ata_port *ap = qc->ap; | |
4568 | ||
39599a53 | 4569 | qc->result_tf.flags = qc->tf.flags; |
22183bf5 | 4570 | ap->ops->qc_fill_rtf(qc); |
39599a53 TH |
4571 | } |
4572 | ||
00115e0f TH |
4573 | static void ata_verify_xfer(struct ata_queued_cmd *qc) |
4574 | { | |
4575 | struct ata_device *dev = qc->dev; | |
4576 | ||
4577 | if (ata_tag_internal(qc->tag)) | |
4578 | return; | |
4579 | ||
4580 | if (ata_is_nodata(qc->tf.protocol)) | |
4581 | return; | |
4582 | ||
4583 | if ((dev->mwdma_mask || dev->udma_mask) && ata_is_pio(qc->tf.protocol)) | |
4584 | return; | |
4585 | ||
4586 | dev->flags &= ~ATA_DFLAG_DUBIOUS_XFER; | |
4587 | } | |
4588 | ||
f686bcb8 TH |
4589 | /** |
4590 | * ata_qc_complete - Complete an active ATA command | |
4591 | * @qc: Command to complete | |
4592 | * @err_mask: ATA Status register contents | |
4593 | * | |
4594 | * Indicate to the mid and upper layers that an ATA | |
4595 | * command has completed, with either an ok or not-ok status. | |
4596 | * | |
4597 | * LOCKING: | |
cca3974e | 4598 | * spin_lock_irqsave(host lock) |
f686bcb8 TH |
4599 | */ |
4600 | void ata_qc_complete(struct ata_queued_cmd *qc) | |
4601 | { | |
4602 | struct ata_port *ap = qc->ap; | |
4603 | ||
4604 | /* XXX: New EH and old EH use different mechanisms to | |
4605 | * synchronize EH with regular execution path. | |
4606 | * | |
4607 | * In new EH, a failed qc is marked with ATA_QCFLAG_FAILED. | |
4608 | * Normal execution path is responsible for not accessing a | |
4609 | * failed qc. libata core enforces the rule by returning NULL | |
4610 | * from ata_qc_from_tag() for failed qcs. | |
4611 | * | |
4612 | * Old EH depends on ata_qc_complete() nullifying completion | |
4613 | * requests if ATA_QCFLAG_EH_SCHEDULED is set. Old EH does | |
4614 | * not synchronize with interrupt handler. Only PIO task is | |
4615 | * taken care of. | |
4616 | */ | |
4617 | if (ap->ops->error_handler) { | |
4dbfa39b TH |
4618 | struct ata_device *dev = qc->dev; |
4619 | struct ata_eh_info *ehi = &dev->link->eh_info; | |
4620 | ||
b51e9e5d | 4621 | WARN_ON(ap->pflags & ATA_PFLAG_FROZEN); |
f686bcb8 TH |
4622 | |
4623 | if (unlikely(qc->err_mask)) | |
4624 | qc->flags |= ATA_QCFLAG_FAILED; | |
4625 | ||
4626 | if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) { | |
4627 | if (!ata_tag_internal(qc->tag)) { | |
4628 | /* always fill result TF for failed qc */ | |
39599a53 | 4629 | fill_result_tf(qc); |
f686bcb8 TH |
4630 | ata_qc_schedule_eh(qc); |
4631 | return; | |
4632 | } | |
4633 | } | |
4634 | ||
4635 | /* read result TF if requested */ | |
4636 | if (qc->flags & ATA_QCFLAG_RESULT_TF) | |
39599a53 | 4637 | fill_result_tf(qc); |
f686bcb8 | 4638 | |
4dbfa39b TH |
4639 | /* Some commands need post-processing after successful |
4640 | * completion. | |
4641 | */ | |
4642 | switch (qc->tf.command) { | |
4643 | case ATA_CMD_SET_FEATURES: | |
4644 | if (qc->tf.feature != SETFEATURES_WC_ON && | |
4645 | qc->tf.feature != SETFEATURES_WC_OFF) | |
4646 | break; | |
4647 | /* fall through */ | |
4648 | case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */ | |
4649 | case ATA_CMD_SET_MULTI: /* multi_count changed */ | |
4650 | /* revalidate device */ | |
4651 | ehi->dev_action[dev->devno] |= ATA_EH_REVALIDATE; | |
4652 | ata_port_schedule_eh(ap); | |
4653 | break; | |
054a5fba TH |
4654 | |
4655 | case ATA_CMD_SLEEP: | |
4656 | dev->flags |= ATA_DFLAG_SLEEPING; | |
4657 | break; | |
4dbfa39b TH |
4658 | } |
4659 | ||
00115e0f TH |
4660 | if (unlikely(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) |
4661 | ata_verify_xfer(qc); | |
4662 | ||
f686bcb8 TH |
4663 | __ata_qc_complete(qc); |
4664 | } else { | |
4665 | if (qc->flags & ATA_QCFLAG_EH_SCHEDULED) | |
4666 | return; | |
4667 | ||
4668 | /* read result TF if failed or requested */ | |
4669 | if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF) | |
39599a53 | 4670 | fill_result_tf(qc); |
f686bcb8 TH |
4671 | |
4672 | __ata_qc_complete(qc); | |
4673 | } | |
4674 | } | |
4675 | ||
dedaf2b0 TH |
4676 | /** |
4677 | * ata_qc_complete_multiple - Complete multiple qcs successfully | |
4678 | * @ap: port in question | |
4679 | * @qc_active: new qc_active mask | |
dedaf2b0 TH |
4680 | * |
4681 | * Complete in-flight commands. This functions is meant to be | |
4682 | * called from low-level driver's interrupt routine to complete | |
4683 | * requests normally. ap->qc_active and @qc_active is compared | |
4684 | * and commands are completed accordingly. | |
4685 | * | |
4686 | * LOCKING: | |
cca3974e | 4687 | * spin_lock_irqsave(host lock) |
dedaf2b0 TH |
4688 | * |
4689 | * RETURNS: | |
4690 | * Number of completed commands on success, -errno otherwise. | |
4691 | */ | |
79f97dad | 4692 | int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active) |
dedaf2b0 TH |
4693 | { |
4694 | int nr_done = 0; | |
4695 | u32 done_mask; | |
4696 | int i; | |
4697 | ||
4698 | done_mask = ap->qc_active ^ qc_active; | |
4699 | ||
4700 | if (unlikely(done_mask & qc_active)) { | |
4701 | ata_port_printk(ap, KERN_ERR, "illegal qc_active transition " | |
4702 | "(%08x->%08x)\n", ap->qc_active, qc_active); | |
4703 | return -EINVAL; | |
4704 | } | |
4705 | ||
4706 | for (i = 0; i < ATA_MAX_QUEUE; i++) { | |
4707 | struct ata_queued_cmd *qc; | |
4708 | ||
4709 | if (!(done_mask & (1 << i))) | |
4710 | continue; | |
4711 | ||
4712 | if ((qc = ata_qc_from_tag(ap, i))) { | |
dedaf2b0 TH |
4713 | ata_qc_complete(qc); |
4714 | nr_done++; | |
4715 | } | |
4716 | } | |
4717 | ||
4718 | return nr_done; | |
4719 | } | |
4720 | ||
1da177e4 LT |
4721 | /** |
4722 | * ata_qc_issue - issue taskfile to device | |
4723 | * @qc: command to issue to device | |
4724 | * | |
4725 | * Prepare an ATA command to submission to device. | |
4726 | * This includes mapping the data into a DMA-able | |
4727 | * area, filling in the S/G table, and finally | |
4728 | * writing the taskfile to hardware, starting the command. | |
4729 | * | |
4730 | * LOCKING: | |
cca3974e | 4731 | * spin_lock_irqsave(host lock) |
1da177e4 | 4732 | */ |
8e0e694a | 4733 | void ata_qc_issue(struct ata_queued_cmd *qc) |
1da177e4 LT |
4734 | { |
4735 | struct ata_port *ap = qc->ap; | |
9af5c9c9 | 4736 | struct ata_link *link = qc->dev->link; |
405e66b3 | 4737 | u8 prot = qc->tf.protocol; |
1da177e4 | 4738 | |
dedaf2b0 TH |
4739 | /* Make sure only one non-NCQ command is outstanding. The |
4740 | * check is skipped for old EH because it reuses active qc to | |
4741 | * request ATAPI sense. | |
4742 | */ | |
9af5c9c9 | 4743 | WARN_ON(ap->ops->error_handler && ata_tag_valid(link->active_tag)); |
dedaf2b0 | 4744 | |
1973a023 | 4745 | if (ata_is_ncq(prot)) { |
9af5c9c9 | 4746 | WARN_ON(link->sactive & (1 << qc->tag)); |
da917d69 TH |
4747 | |
4748 | if (!link->sactive) | |
4749 | ap->nr_active_links++; | |
9af5c9c9 | 4750 | link->sactive |= 1 << qc->tag; |
dedaf2b0 | 4751 | } else { |
9af5c9c9 | 4752 | WARN_ON(link->sactive); |
da917d69 TH |
4753 | |
4754 | ap->nr_active_links++; | |
9af5c9c9 | 4755 | link->active_tag = qc->tag; |
dedaf2b0 TH |
4756 | } |
4757 | ||
e4a70e76 | 4758 | qc->flags |= ATA_QCFLAG_ACTIVE; |
dedaf2b0 | 4759 | ap->qc_active |= 1 << qc->tag; |
e4a70e76 | 4760 | |
f92a2636 TH |
4761 | /* We guarantee to LLDs that they will have at least one |
4762 | * non-zero sg if the command is a data command. | |
4763 | */ | |
ff2aeb1e | 4764 | BUG_ON(ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes)); |
f92a2636 | 4765 | |
405e66b3 | 4766 | if (ata_is_dma(prot) || (ata_is_pio(prot) && |
f92a2636 | 4767 | (ap->flags & ATA_FLAG_PIO_DMA))) |
001102d7 TH |
4768 | if (ata_sg_setup(qc)) |
4769 | goto sg_err; | |
1da177e4 | 4770 | |
cf480626 | 4771 | /* if device is sleeping, schedule reset and abort the link */ |
054a5fba | 4772 | if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) { |
cf480626 | 4773 | link->eh_info.action |= ATA_EH_RESET; |
054a5fba TH |
4774 | ata_ehi_push_desc(&link->eh_info, "waking up from sleep"); |
4775 | ata_link_abort(link); | |
4776 | return; | |
4777 | } | |
4778 | ||
1da177e4 LT |
4779 | ap->ops->qc_prep(qc); |
4780 | ||
8e0e694a TH |
4781 | qc->err_mask |= ap->ops->qc_issue(qc); |
4782 | if (unlikely(qc->err_mask)) | |
4783 | goto err; | |
4784 | return; | |
1da177e4 | 4785 | |
8e436af9 | 4786 | sg_err: |
8e0e694a TH |
4787 | qc->err_mask |= AC_ERR_SYSTEM; |
4788 | err: | |
4789 | ata_qc_complete(qc); | |
1da177e4 LT |
4790 | } |
4791 | ||
34bf2170 TH |
4792 | /** |
4793 | * sata_scr_valid - test whether SCRs are accessible | |
936fd732 | 4794 | * @link: ATA link to test SCR accessibility for |
34bf2170 | 4795 | * |
936fd732 | 4796 | * Test whether SCRs are accessible for @link. |
34bf2170 TH |
4797 | * |
4798 | * LOCKING: | |
4799 | * None. | |
4800 | * | |
4801 | * RETURNS: | |
4802 | * 1 if SCRs are accessible, 0 otherwise. | |
4803 | */ | |
936fd732 | 4804 | int sata_scr_valid(struct ata_link *link) |
34bf2170 | 4805 | { |
936fd732 TH |
4806 | struct ata_port *ap = link->ap; |
4807 | ||
a16abc0b | 4808 | return (ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read; |
34bf2170 TH |
4809 | } |
4810 | ||
4811 | /** | |
4812 | * sata_scr_read - read SCR register of the specified port | |
936fd732 | 4813 | * @link: ATA link to read SCR for |
34bf2170 TH |
4814 | * @reg: SCR to read |
4815 | * @val: Place to store read value | |
4816 | * | |
936fd732 | 4817 | * Read SCR register @reg of @link into *@val. This function is |
633273a3 TH |
4818 | * guaranteed to succeed if @link is ap->link, the cable type of |
4819 | * the port is SATA and the port implements ->scr_read. | |
34bf2170 TH |
4820 | * |
4821 | * LOCKING: | |
633273a3 | 4822 | * None if @link is ap->link. Kernel thread context otherwise. |
34bf2170 TH |
4823 | * |
4824 | * RETURNS: | |
4825 | * 0 on success, negative errno on failure. | |
4826 | */ | |
936fd732 | 4827 | int sata_scr_read(struct ata_link *link, int reg, u32 *val) |
34bf2170 | 4828 | { |
633273a3 TH |
4829 | if (ata_is_host_link(link)) { |
4830 | struct ata_port *ap = link->ap; | |
936fd732 | 4831 | |
633273a3 TH |
4832 | if (sata_scr_valid(link)) |
4833 | return ap->ops->scr_read(ap, reg, val); | |
4834 | return -EOPNOTSUPP; | |
4835 | } | |
4836 | ||
4837 | return sata_pmp_scr_read(link, reg, val); | |
34bf2170 TH |
4838 | } |
4839 | ||
4840 | /** | |
4841 | * sata_scr_write - write SCR register of the specified port | |
936fd732 | 4842 | * @link: ATA link to write SCR for |
34bf2170 TH |
4843 | * @reg: SCR to write |
4844 | * @val: value to write | |
4845 | * | |
936fd732 | 4846 | * Write @val to SCR register @reg of @link. This function is |
633273a3 TH |
4847 | * guaranteed to succeed if @link is ap->link, the cable type of |
4848 | * the port is SATA and the port implements ->scr_read. | |
34bf2170 TH |
4849 | * |
4850 | * LOCKING: | |
633273a3 | 4851 | * None if @link is ap->link. Kernel thread context otherwise. |
34bf2170 TH |
4852 | * |
4853 | * RETURNS: | |
4854 | * 0 on success, negative errno on failure. | |
4855 | */ | |
936fd732 | 4856 | int sata_scr_write(struct ata_link *link, int reg, u32 val) |
34bf2170 | 4857 | { |
633273a3 TH |
4858 | if (ata_is_host_link(link)) { |
4859 | struct ata_port *ap = link->ap; | |
4860 | ||
4861 | if (sata_scr_valid(link)) | |
4862 | return ap->ops->scr_write(ap, reg, val); | |
4863 | return -EOPNOTSUPP; | |
4864 | } | |
936fd732 | 4865 | |
633273a3 | 4866 | return sata_pmp_scr_write(link, reg, val); |
34bf2170 TH |
4867 | } |
4868 | ||
4869 | /** | |
4870 | * sata_scr_write_flush - write SCR register of the specified port and flush | |
936fd732 | 4871 | * @link: ATA link to write SCR for |
34bf2170 TH |
4872 | * @reg: SCR to write |
4873 | * @val: value to write | |
4874 | * | |
4875 | * This function is identical to sata_scr_write() except that this | |
4876 | * function performs flush after writing to the register. | |
4877 | * | |
4878 | * LOCKING: | |
633273a3 | 4879 | * None if @link is ap->link. Kernel thread context otherwise. |
34bf2170 TH |
4880 | * |
4881 | * RETURNS: | |
4882 | * 0 on success, negative errno on failure. | |
4883 | */ | |
936fd732 | 4884 | int sata_scr_write_flush(struct ata_link *link, int reg, u32 val) |
34bf2170 | 4885 | { |
633273a3 TH |
4886 | if (ata_is_host_link(link)) { |
4887 | struct ata_port *ap = link->ap; | |
4888 | int rc; | |
da3dbb17 | 4889 | |
633273a3 TH |
4890 | if (sata_scr_valid(link)) { |
4891 | rc = ap->ops->scr_write(ap, reg, val); | |
4892 | if (rc == 0) | |
4893 | rc = ap->ops->scr_read(ap, reg, &val); | |
4894 | return rc; | |
4895 | } | |
4896 | return -EOPNOTSUPP; | |
34bf2170 | 4897 | } |
633273a3 TH |
4898 | |
4899 | return sata_pmp_scr_write(link, reg, val); | |
34bf2170 TH |
4900 | } |
4901 | ||
4902 | /** | |
936fd732 TH |
4903 | * ata_link_online - test whether the given link is online |
4904 | * @link: ATA link to test | |
34bf2170 | 4905 | * |
936fd732 TH |
4906 | * Test whether @link is online. Note that this function returns |
4907 | * 0 if online status of @link cannot be obtained, so | |
4908 | * ata_link_online(link) != !ata_link_offline(link). | |
34bf2170 TH |
4909 | * |
4910 | * LOCKING: | |
4911 | * None. | |
4912 | * | |
4913 | * RETURNS: | |
4914 | * 1 if the port online status is available and online. | |
4915 | */ | |
936fd732 | 4916 | int ata_link_online(struct ata_link *link) |
34bf2170 TH |
4917 | { |
4918 | u32 sstatus; | |
4919 | ||
936fd732 TH |
4920 | if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && |
4921 | (sstatus & 0xf) == 0x3) | |
34bf2170 TH |
4922 | return 1; |
4923 | return 0; | |
4924 | } | |
4925 | ||
4926 | /** | |
936fd732 TH |
4927 | * ata_link_offline - test whether the given link is offline |
4928 | * @link: ATA link to test | |
34bf2170 | 4929 | * |
936fd732 TH |
4930 | * Test whether @link is offline. Note that this function |
4931 | * returns 0 if offline status of @link cannot be obtained, so | |
4932 | * ata_link_online(link) != !ata_link_offline(link). | |
34bf2170 TH |
4933 | * |
4934 | * LOCKING: | |
4935 | * None. | |
4936 | * | |
4937 | * RETURNS: | |
4938 | * 1 if the port offline status is available and offline. | |
4939 | */ | |
936fd732 | 4940 | int ata_link_offline(struct ata_link *link) |
34bf2170 TH |
4941 | { |
4942 | u32 sstatus; | |
4943 | ||
936fd732 TH |
4944 | if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && |
4945 | (sstatus & 0xf) != 0x3) | |
34bf2170 TH |
4946 | return 1; |
4947 | return 0; | |
4948 | } | |
0baab86b | 4949 | |
6ffa01d8 | 4950 | #ifdef CONFIG_PM |
cca3974e JG |
4951 | static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg, |
4952 | unsigned int action, unsigned int ehi_flags, | |
4953 | int wait) | |
500530f6 TH |
4954 | { |
4955 | unsigned long flags; | |
4956 | int i, rc; | |
4957 | ||
cca3974e JG |
4958 | for (i = 0; i < host->n_ports; i++) { |
4959 | struct ata_port *ap = host->ports[i]; | |
e3667ebf | 4960 | struct ata_link *link; |
500530f6 TH |
4961 | |
4962 | /* Previous resume operation might still be in | |
4963 | * progress. Wait for PM_PENDING to clear. | |
4964 | */ | |
4965 | if (ap->pflags & ATA_PFLAG_PM_PENDING) { | |
4966 | ata_port_wait_eh(ap); | |
4967 | WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); | |
4968 | } | |
4969 | ||
4970 | /* request PM ops to EH */ | |
4971 | spin_lock_irqsave(ap->lock, flags); | |
4972 | ||
4973 | ap->pm_mesg = mesg; | |
4974 | if (wait) { | |
4975 | rc = 0; | |
4976 | ap->pm_result = &rc; | |
4977 | } | |
4978 | ||
4979 | ap->pflags |= ATA_PFLAG_PM_PENDING; | |
e3667ebf TH |
4980 | __ata_port_for_each_link(link, ap) { |
4981 | link->eh_info.action |= action; | |
4982 | link->eh_info.flags |= ehi_flags; | |
4983 | } | |
500530f6 TH |
4984 | |
4985 | ata_port_schedule_eh(ap); | |
4986 | ||
4987 | spin_unlock_irqrestore(ap->lock, flags); | |
4988 | ||
4989 | /* wait and check result */ | |
4990 | if (wait) { | |
4991 | ata_port_wait_eh(ap); | |
4992 | WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); | |
4993 | if (rc) | |
4994 | return rc; | |
4995 | } | |
4996 | } | |
4997 | ||
4998 | return 0; | |
4999 | } | |
5000 | ||
5001 | /** | |
cca3974e JG |
5002 | * ata_host_suspend - suspend host |
5003 | * @host: host to suspend | |
500530f6 TH |
5004 | * @mesg: PM message |
5005 | * | |
cca3974e | 5006 | * Suspend @host. Actual operation is performed by EH. This |
500530f6 TH |
5007 | * function requests EH to perform PM operations and waits for EH |
5008 | * to finish. | |
5009 | * | |
5010 | * LOCKING: | |
5011 | * Kernel thread context (may sleep). | |
5012 | * | |
5013 | * RETURNS: | |
5014 | * 0 on success, -errno on failure. | |
5015 | */ | |
cca3974e | 5016 | int ata_host_suspend(struct ata_host *host, pm_message_t mesg) |
500530f6 | 5017 | { |
9666f400 | 5018 | int rc; |
500530f6 | 5019 | |
ca77329f KCA |
5020 | /* |
5021 | * disable link pm on all ports before requesting | |
5022 | * any pm activity | |
5023 | */ | |
5024 | ata_lpm_enable(host); | |
5025 | ||
cca3974e | 5026 | rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1); |
72ad6ec4 JG |
5027 | if (rc == 0) |
5028 | host->dev->power.power_state = mesg; | |
500530f6 TH |
5029 | return rc; |
5030 | } | |
5031 | ||
5032 | /** | |
cca3974e JG |
5033 | * ata_host_resume - resume host |
5034 | * @host: host to resume | |
500530f6 | 5035 | * |
cca3974e | 5036 | * Resume @host. Actual operation is performed by EH. This |
500530f6 TH |
5037 | * function requests EH to perform PM operations and returns. |
5038 | * Note that all resume operations are performed parallely. | |
5039 | * | |
5040 | * LOCKING: | |
5041 | * Kernel thread context (may sleep). | |
5042 | */ | |
cca3974e | 5043 | void ata_host_resume(struct ata_host *host) |
500530f6 | 5044 | { |
cf480626 | 5045 | ata_host_request_pm(host, PMSG_ON, ATA_EH_RESET, |
cca3974e | 5046 | ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); |
72ad6ec4 | 5047 | host->dev->power.power_state = PMSG_ON; |
ca77329f KCA |
5048 | |
5049 | /* reenable link pm */ | |
5050 | ata_lpm_disable(host); | |
500530f6 | 5051 | } |
6ffa01d8 | 5052 | #endif |
500530f6 | 5053 | |
c893a3ae RD |
5054 | /** |
5055 | * ata_port_start - Set port up for dma. | |
5056 | * @ap: Port to initialize | |
5057 | * | |
5058 | * Called just after data structures for each port are | |
5059 | * initialized. Allocates space for PRD table. | |
5060 | * | |
5061 | * May be used as the port_start() entry in ata_port_operations. | |
5062 | * | |
5063 | * LOCKING: | |
5064 | * Inherited from caller. | |
5065 | */ | |
f0d36efd | 5066 | int ata_port_start(struct ata_port *ap) |
1da177e4 | 5067 | { |
2f1f610b | 5068 | struct device *dev = ap->dev; |
1da177e4 | 5069 | |
f0d36efd TH |
5070 | ap->prd = dmam_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma, |
5071 | GFP_KERNEL); | |
1da177e4 LT |
5072 | if (!ap->prd) |
5073 | return -ENOMEM; | |
5074 | ||
1da177e4 LT |
5075 | return 0; |
5076 | } | |
5077 | ||
3ef3b43d TH |
5078 | /** |
5079 | * ata_dev_init - Initialize an ata_device structure | |
5080 | * @dev: Device structure to initialize | |
5081 | * | |
5082 | * Initialize @dev in preparation for probing. | |
5083 | * | |
5084 | * LOCKING: | |
5085 | * Inherited from caller. | |
5086 | */ | |
5087 | void ata_dev_init(struct ata_device *dev) | |
5088 | { | |
9af5c9c9 TH |
5089 | struct ata_link *link = dev->link; |
5090 | struct ata_port *ap = link->ap; | |
72fa4b74 TH |
5091 | unsigned long flags; |
5092 | ||
5a04bf4b | 5093 | /* SATA spd limit is bound to the first device */ |
9af5c9c9 TH |
5094 | link->sata_spd_limit = link->hw_sata_spd_limit; |
5095 | link->sata_spd = 0; | |
5a04bf4b | 5096 | |
72fa4b74 TH |
5097 | /* High bits of dev->flags are used to record warm plug |
5098 | * requests which occur asynchronously. Synchronize using | |
cca3974e | 5099 | * host lock. |
72fa4b74 | 5100 | */ |
ba6a1308 | 5101 | spin_lock_irqsave(ap->lock, flags); |
72fa4b74 | 5102 | dev->flags &= ~ATA_DFLAG_INIT_MASK; |
3dcc323f | 5103 | dev->horkage = 0; |
ba6a1308 | 5104 | spin_unlock_irqrestore(ap->lock, flags); |
3ef3b43d | 5105 | |
72fa4b74 TH |
5106 | memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0, |
5107 | sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET); | |
3ef3b43d TH |
5108 | dev->pio_mask = UINT_MAX; |
5109 | dev->mwdma_mask = UINT_MAX; | |
5110 | dev->udma_mask = UINT_MAX; | |
5111 | } | |
5112 | ||
4fb37a25 TH |
5113 | /** |
5114 | * ata_link_init - Initialize an ata_link structure | |
5115 | * @ap: ATA port link is attached to | |
5116 | * @link: Link structure to initialize | |
8989805d | 5117 | * @pmp: Port multiplier port number |
4fb37a25 TH |
5118 | * |
5119 | * Initialize @link. | |
5120 | * | |
5121 | * LOCKING: | |
5122 | * Kernel thread context (may sleep) | |
5123 | */ | |
fb7fd614 | 5124 | void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp) |
4fb37a25 TH |
5125 | { |
5126 | int i; | |
5127 | ||
5128 | /* clear everything except for devices */ | |
5129 | memset(link, 0, offsetof(struct ata_link, device[0])); | |
5130 | ||
5131 | link->ap = ap; | |
8989805d | 5132 | link->pmp = pmp; |
4fb37a25 TH |
5133 | link->active_tag = ATA_TAG_POISON; |
5134 | link->hw_sata_spd_limit = UINT_MAX; | |
5135 | ||
5136 | /* can't use iterator, ap isn't initialized yet */ | |
5137 | for (i = 0; i < ATA_MAX_DEVICES; i++) { | |
5138 | struct ata_device *dev = &link->device[i]; | |
5139 | ||
5140 | dev->link = link; | |
5141 | dev->devno = dev - link->device; | |
5142 | ata_dev_init(dev); | |
5143 | } | |
5144 | } | |
5145 | ||
5146 | /** | |
5147 | * sata_link_init_spd - Initialize link->sata_spd_limit | |
5148 | * @link: Link to configure sata_spd_limit for | |
5149 | * | |
5150 | * Initialize @link->[hw_]sata_spd_limit to the currently | |
5151 | * configured value. | |
5152 | * | |
5153 | * LOCKING: | |
5154 | * Kernel thread context (may sleep). | |
5155 | * | |
5156 | * RETURNS: | |
5157 | * 0 on success, -errno on failure. | |
5158 | */ | |
fb7fd614 | 5159 | int sata_link_init_spd(struct ata_link *link) |
4fb37a25 | 5160 | { |
33267325 TH |
5161 | u32 scontrol; |
5162 | u8 spd; | |
4fb37a25 TH |
5163 | int rc; |
5164 | ||
5165 | rc = sata_scr_read(link, SCR_CONTROL, &scontrol); | |
5166 | if (rc) | |
5167 | return rc; | |
5168 | ||
5169 | spd = (scontrol >> 4) & 0xf; | |
5170 | if (spd) | |
5171 | link->hw_sata_spd_limit &= (1 << spd) - 1; | |
5172 | ||
33267325 TH |
5173 | ata_force_spd_limit(link); |
5174 | ||
4fb37a25 TH |
5175 | link->sata_spd_limit = link->hw_sata_spd_limit; |
5176 | ||
5177 | return 0; | |
5178 | } | |
5179 | ||
1da177e4 | 5180 | /** |
f3187195 TH |
5181 | * ata_port_alloc - allocate and initialize basic ATA port resources |
5182 | * @host: ATA host this allocated port belongs to | |
1da177e4 | 5183 | * |
f3187195 TH |
5184 | * Allocate and initialize basic ATA port resources. |
5185 | * | |
5186 | * RETURNS: | |
5187 | * Allocate ATA port on success, NULL on failure. | |
0cba632b | 5188 | * |
1da177e4 | 5189 | * LOCKING: |
f3187195 | 5190 | * Inherited from calling layer (may sleep). |
1da177e4 | 5191 | */ |
f3187195 | 5192 | struct ata_port *ata_port_alloc(struct ata_host *host) |
1da177e4 | 5193 | { |
f3187195 | 5194 | struct ata_port *ap; |
1da177e4 | 5195 | |
f3187195 TH |
5196 | DPRINTK("ENTER\n"); |
5197 | ||
5198 | ap = kzalloc(sizeof(*ap), GFP_KERNEL); | |
5199 | if (!ap) | |
5200 | return NULL; | |
5201 | ||
f4d6d004 | 5202 | ap->pflags |= ATA_PFLAG_INITIALIZING; |
cca3974e | 5203 | ap->lock = &host->lock; |
198e0fed | 5204 | ap->flags = ATA_FLAG_DISABLED; |
f3187195 | 5205 | ap->print_id = -1; |
1da177e4 | 5206 | ap->ctl = ATA_DEVCTL_OBS; |
cca3974e | 5207 | ap->host = host; |
f3187195 | 5208 | ap->dev = host->dev; |
1da177e4 | 5209 | ap->last_ctl = 0xFF; |
bd5d825c BP |
5210 | |
5211 | #if defined(ATA_VERBOSE_DEBUG) | |
5212 | /* turn on all debugging levels */ | |
5213 | ap->msg_enable = 0x00FF; | |
5214 | #elif defined(ATA_DEBUG) | |
5215 | ap->msg_enable = ATA_MSG_DRV | ATA_MSG_INFO | ATA_MSG_CTL | ATA_MSG_WARN | ATA_MSG_ERR; | |
88574551 | 5216 | #else |
0dd4b21f | 5217 | ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN; |
bd5d825c | 5218 | #endif |
1da177e4 | 5219 | |
127102ae | 5220 | #ifdef CONFIG_ATA_SFF |
442eacc3 | 5221 | INIT_DELAYED_WORK(&ap->port_task, ata_pio_task); |
127102ae | 5222 | #endif |
65f27f38 DH |
5223 | INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug); |
5224 | INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan); | |
a72ec4ce | 5225 | INIT_LIST_HEAD(&ap->eh_done_q); |
c6cf9e99 | 5226 | init_waitqueue_head(&ap->eh_wait_q); |
5ddf24c5 TH |
5227 | init_timer_deferrable(&ap->fastdrain_timer); |
5228 | ap->fastdrain_timer.function = ata_eh_fastdrain_timerfn; | |
5229 | ap->fastdrain_timer.data = (unsigned long)ap; | |
1da177e4 | 5230 | |
838df628 | 5231 | ap->cbl = ATA_CBL_NONE; |
838df628 | 5232 | |
8989805d | 5233 | ata_link_init(ap, &ap->link, 0); |
1da177e4 LT |
5234 | |
5235 | #ifdef ATA_IRQ_TRAP | |
5236 | ap->stats.unhandled_irq = 1; | |
5237 | ap->stats.idle_irq = 1; | |
5238 | #endif | |
1da177e4 | 5239 | return ap; |
1da177e4 LT |
5240 | } |
5241 | ||
f0d36efd TH |
5242 | static void ata_host_release(struct device *gendev, void *res) |
5243 | { | |
5244 | struct ata_host *host = dev_get_drvdata(gendev); | |
5245 | int i; | |
5246 | ||
1aa506e4 TH |
5247 | for (i = 0; i < host->n_ports; i++) { |
5248 | struct ata_port *ap = host->ports[i]; | |
5249 | ||
4911487a TH |
5250 | if (!ap) |
5251 | continue; | |
5252 | ||
5253 | if (ap->scsi_host) | |
1aa506e4 TH |
5254 | scsi_host_put(ap->scsi_host); |
5255 | ||
633273a3 | 5256 | kfree(ap->pmp_link); |
4911487a | 5257 | kfree(ap); |
1aa506e4 TH |
5258 | host->ports[i] = NULL; |
5259 | } | |
5260 | ||
1aa56cca | 5261 | dev_set_drvdata(gendev, NULL); |
f0d36efd TH |
5262 | } |
5263 | ||
f3187195 TH |
5264 | /** |
5265 | * ata_host_alloc - allocate and init basic ATA host resources | |
5266 | * @dev: generic device this host is associated with | |
5267 | * @max_ports: maximum number of ATA ports associated with this host | |
5268 | * | |
5269 | * Allocate and initialize basic ATA host resources. LLD calls | |
5270 | * this function to allocate a host, initializes it fully and | |
5271 | * attaches it using ata_host_register(). | |
5272 | * | |
5273 | * @max_ports ports are allocated and host->n_ports is | |
5274 | * initialized to @max_ports. The caller is allowed to decrease | |
5275 | * host->n_ports before calling ata_host_register(). The unused | |
5276 | * ports will be automatically freed on registration. | |
5277 | * | |
5278 | * RETURNS: | |
5279 | * Allocate ATA host on success, NULL on failure. | |
5280 | * | |
5281 | * LOCKING: | |
5282 | * Inherited from calling layer (may sleep). | |
5283 | */ | |
5284 | struct ata_host *ata_host_alloc(struct device *dev, int max_ports) | |
5285 | { | |
5286 | struct ata_host *host; | |
5287 | size_t sz; | |
5288 | int i; | |
5289 | ||
5290 | DPRINTK("ENTER\n"); | |
5291 | ||
5292 | if (!devres_open_group(dev, NULL, GFP_KERNEL)) | |
5293 | return NULL; | |
5294 | ||
5295 | /* alloc a container for our list of ATA ports (buses) */ | |
5296 | sz = sizeof(struct ata_host) + (max_ports + 1) * sizeof(void *); | |
5297 | /* alloc a container for our list of ATA ports (buses) */ | |
5298 | host = devres_alloc(ata_host_release, sz, GFP_KERNEL); | |
5299 | if (!host) | |
5300 | goto err_out; | |
5301 | ||
5302 | devres_add(dev, host); | |
5303 | dev_set_drvdata(dev, host); | |
5304 | ||
5305 | spin_lock_init(&host->lock); | |
5306 | host->dev = dev; | |
5307 | host->n_ports = max_ports; | |
5308 | ||
5309 | /* allocate ports bound to this host */ | |
5310 | for (i = 0; i < max_ports; i++) { | |
5311 | struct ata_port *ap; | |
5312 | ||
5313 | ap = ata_port_alloc(host); | |
5314 | if (!ap) | |
5315 | goto err_out; | |
5316 | ||
5317 | ap->port_no = i; | |
5318 | host->ports[i] = ap; | |
5319 | } | |
5320 | ||
5321 | devres_remove_group(dev, NULL); | |
5322 | return host; | |
5323 | ||
5324 | err_out: | |
5325 | devres_release_group(dev, NULL); | |
5326 | return NULL; | |
5327 | } | |
5328 | ||
f5cda257 TH |
5329 | /** |
5330 | * ata_host_alloc_pinfo - alloc host and init with port_info array | |
5331 | * @dev: generic device this host is associated with | |
5332 | * @ppi: array of ATA port_info to initialize host with | |
5333 | * @n_ports: number of ATA ports attached to this host | |
5334 | * | |
5335 | * Allocate ATA host and initialize with info from @ppi. If NULL | |
5336 | * terminated, @ppi may contain fewer entries than @n_ports. The | |
5337 | * last entry will be used for the remaining ports. | |
5338 | * | |
5339 | * RETURNS: | |
5340 | * Allocate ATA host on success, NULL on failure. | |
5341 | * | |
5342 | * LOCKING: | |
5343 | * Inherited from calling layer (may sleep). | |
5344 | */ | |
5345 | struct ata_host *ata_host_alloc_pinfo(struct device *dev, | |
5346 | const struct ata_port_info * const * ppi, | |
5347 | int n_ports) | |
5348 | { | |
5349 | const struct ata_port_info *pi; | |
5350 | struct ata_host *host; | |
5351 | int i, j; | |
5352 | ||
5353 | host = ata_host_alloc(dev, n_ports); | |
5354 | if (!host) | |
5355 | return NULL; | |
5356 | ||
5357 | for (i = 0, j = 0, pi = NULL; i < host->n_ports; i++) { | |
5358 | struct ata_port *ap = host->ports[i]; | |
5359 | ||
5360 | if (ppi[j]) | |
5361 | pi = ppi[j++]; | |
5362 | ||
5363 | ap->pio_mask = pi->pio_mask; | |
5364 | ap->mwdma_mask = pi->mwdma_mask; | |
5365 | ap->udma_mask = pi->udma_mask; | |
5366 | ap->flags |= pi->flags; | |
0c88758b | 5367 | ap->link.flags |= pi->link_flags; |
f5cda257 TH |
5368 | ap->ops = pi->port_ops; |
5369 | ||
5370 | if (!host->ops && (pi->port_ops != &ata_dummy_port_ops)) | |
5371 | host->ops = pi->port_ops; | |
f5cda257 TH |
5372 | } |
5373 | ||
5374 | return host; | |
5375 | } | |
5376 | ||
32ebbc0c TH |
5377 | static void ata_host_stop(struct device *gendev, void *res) |
5378 | { | |
5379 | struct ata_host *host = dev_get_drvdata(gendev); | |
5380 | int i; | |
5381 | ||
5382 | WARN_ON(!(host->flags & ATA_HOST_STARTED)); | |
5383 | ||
5384 | for (i = 0; i < host->n_ports; i++) { | |
5385 | struct ata_port *ap = host->ports[i]; | |
5386 | ||
5387 | if (ap->ops->port_stop) | |
5388 | ap->ops->port_stop(ap); | |
5389 | } | |
5390 | ||
5391 | if (host->ops->host_stop) | |
5392 | host->ops->host_stop(host); | |
5393 | } | |
5394 | ||
029cfd6b TH |
5395 | /** |
5396 | * ata_finalize_port_ops - finalize ata_port_operations | |
5397 | * @ops: ata_port_operations to finalize | |
5398 | * | |
5399 | * An ata_port_operations can inherit from another ops and that | |
5400 | * ops can again inherit from another. This can go on as many | |
5401 | * times as necessary as long as there is no loop in the | |
5402 | * inheritance chain. | |
5403 | * | |
5404 | * Ops tables are finalized when the host is started. NULL or | |
5405 | * unspecified entries are inherited from the closet ancestor | |
5406 | * which has the method and the entry is populated with it. | |
5407 | * After finalization, the ops table directly points to all the | |
5408 | * methods and ->inherits is no longer necessary and cleared. | |
5409 | * | |
5410 | * Using ATA_OP_NULL, inheriting ops can force a method to NULL. | |
5411 | * | |
5412 | * LOCKING: | |
5413 | * None. | |
5414 | */ | |
5415 | static void ata_finalize_port_ops(struct ata_port_operations *ops) | |
5416 | { | |
2da67659 | 5417 | static DEFINE_SPINLOCK(lock); |
029cfd6b TH |
5418 | const struct ata_port_operations *cur; |
5419 | void **begin = (void **)ops; | |
5420 | void **end = (void **)&ops->inherits; | |
5421 | void **pp; | |
5422 | ||
5423 | if (!ops || !ops->inherits) | |
5424 | return; | |
5425 | ||
5426 | spin_lock(&lock); | |
5427 | ||
5428 | for (cur = ops->inherits; cur; cur = cur->inherits) { | |
5429 | void **inherit = (void **)cur; | |
5430 | ||
5431 | for (pp = begin; pp < end; pp++, inherit++) | |
5432 | if (!*pp) | |
5433 | *pp = *inherit; | |
5434 | } | |
5435 | ||
5436 | for (pp = begin; pp < end; pp++) | |
5437 | if (IS_ERR(*pp)) | |
5438 | *pp = NULL; | |
5439 | ||
5440 | ops->inherits = NULL; | |
5441 | ||
5442 | spin_unlock(&lock); | |
5443 | } | |
5444 | ||
ecef7253 TH |
5445 | /** |
5446 | * ata_host_start - start and freeze ports of an ATA host | |
5447 | * @host: ATA host to start ports for | |
5448 | * | |
5449 | * Start and then freeze ports of @host. Started status is | |
5450 | * recorded in host->flags, so this function can be called | |
5451 | * multiple times. Ports are guaranteed to get started only | |
f3187195 TH |
5452 | * once. If host->ops isn't initialized yet, its set to the |
5453 | * first non-dummy port ops. | |
ecef7253 TH |
5454 | * |
5455 | * LOCKING: | |
5456 | * Inherited from calling layer (may sleep). | |
5457 | * | |
5458 | * RETURNS: | |
5459 | * 0 if all ports are started successfully, -errno otherwise. | |
5460 | */ | |
5461 | int ata_host_start(struct ata_host *host) | |
5462 | { | |
32ebbc0c TH |
5463 | int have_stop = 0; |
5464 | void *start_dr = NULL; | |
ecef7253 TH |
5465 | int i, rc; |
5466 | ||
5467 | if (host->flags & ATA_HOST_STARTED) | |
5468 | return 0; | |
5469 | ||
029cfd6b TH |
5470 | ata_finalize_port_ops(host->ops); |
5471 | ||
ecef7253 TH |
5472 | for (i = 0; i < host->n_ports; i++) { |
5473 | struct ata_port *ap = host->ports[i]; | |
5474 | ||
029cfd6b TH |
5475 | ata_finalize_port_ops(ap->ops); |
5476 | ||
f3187195 TH |
5477 | if (!host->ops && !ata_port_is_dummy(ap)) |
5478 | host->ops = ap->ops; | |
5479 | ||
32ebbc0c TH |
5480 | if (ap->ops->port_stop) |
5481 | have_stop = 1; | |
5482 | } | |
5483 | ||
5484 | if (host->ops->host_stop) | |
5485 | have_stop = 1; | |
5486 | ||
5487 | if (have_stop) { | |
5488 | start_dr = devres_alloc(ata_host_stop, 0, GFP_KERNEL); | |
5489 | if (!start_dr) | |
5490 | return -ENOMEM; | |
5491 | } | |
5492 | ||
5493 | for (i = 0; i < host->n_ports; i++) { | |
5494 | struct ata_port *ap = host->ports[i]; | |
5495 | ||
ecef7253 TH |
5496 | if (ap->ops->port_start) { |
5497 | rc = ap->ops->port_start(ap); | |
5498 | if (rc) { | |
0f9fe9b7 | 5499 | if (rc != -ENODEV) |
0f757743 AM |
5500 | dev_printk(KERN_ERR, host->dev, |
5501 | "failed to start port %d " | |
5502 | "(errno=%d)\n", i, rc); | |
ecef7253 TH |
5503 | goto err_out; |
5504 | } | |
5505 | } | |
ecef7253 TH |
5506 | ata_eh_freeze_port(ap); |
5507 | } | |
5508 | ||
32ebbc0c TH |
5509 | if (start_dr) |
5510 | devres_add(host->dev, start_dr); | |
ecef7253 TH |
5511 | host->flags |= ATA_HOST_STARTED; |
5512 | return 0; | |
5513 | ||
5514 | err_out: | |
5515 | while (--i >= 0) { | |
5516 | struct ata_port *ap = host->ports[i]; | |
5517 | ||
5518 | if (ap->ops->port_stop) | |
5519 | ap->ops->port_stop(ap); | |
5520 | } | |
32ebbc0c | 5521 | devres_free(start_dr); |
ecef7253 TH |
5522 | return rc; |
5523 | } | |
5524 | ||
b03732f0 | 5525 | /** |
cca3974e JG |
5526 | * ata_sas_host_init - Initialize a host struct |
5527 | * @host: host to initialize | |
5528 | * @dev: device host is attached to | |
5529 | * @flags: host flags | |
5530 | * @ops: port_ops | |
b03732f0 BK |
5531 | * |
5532 | * LOCKING: | |
5533 | * PCI/etc. bus probe sem. | |
5534 | * | |
5535 | */ | |
f3187195 | 5536 | /* KILLME - the only user left is ipr */ |
cca3974e | 5537 | void ata_host_init(struct ata_host *host, struct device *dev, |
029cfd6b | 5538 | unsigned long flags, struct ata_port_operations *ops) |
b03732f0 | 5539 | { |
cca3974e JG |
5540 | spin_lock_init(&host->lock); |
5541 | host->dev = dev; | |
5542 | host->flags = flags; | |
5543 | host->ops = ops; | |
b03732f0 BK |
5544 | } |
5545 | ||
f3187195 TH |
5546 | /** |
5547 | * ata_host_register - register initialized ATA host | |
5548 | * @host: ATA host to register | |
5549 | * @sht: template for SCSI host | |
5550 | * | |
5551 | * Register initialized ATA host. @host is allocated using | |
5552 | * ata_host_alloc() and fully initialized by LLD. This function | |
5553 | * starts ports, registers @host with ATA and SCSI layers and | |
5554 | * probe registered devices. | |
5555 | * | |
5556 | * LOCKING: | |
5557 | * Inherited from calling layer (may sleep). | |
5558 | * | |
5559 | * RETURNS: | |
5560 | * 0 on success, -errno otherwise. | |
5561 | */ | |
5562 | int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) | |
5563 | { | |
5564 | int i, rc; | |
5565 | ||
5566 | /* host must have been started */ | |
5567 | if (!(host->flags & ATA_HOST_STARTED)) { | |
5568 | dev_printk(KERN_ERR, host->dev, | |
5569 | "BUG: trying to register unstarted host\n"); | |
5570 | WARN_ON(1); | |
5571 | return -EINVAL; | |
5572 | } | |
5573 | ||
5574 | /* Blow away unused ports. This happens when LLD can't | |
5575 | * determine the exact number of ports to allocate at | |
5576 | * allocation time. | |
5577 | */ | |
5578 | for (i = host->n_ports; host->ports[i]; i++) | |
5579 | kfree(host->ports[i]); | |
5580 | ||
5581 | /* give ports names and add SCSI hosts */ | |
5582 | for (i = 0; i < host->n_ports; i++) | |
5583 | host->ports[i]->print_id = ata_print_id++; | |
5584 | ||
5585 | rc = ata_scsi_add_hosts(host, sht); | |
5586 | if (rc) | |
5587 | return rc; | |
5588 | ||
fafbae87 TH |
5589 | /* associate with ACPI nodes */ |
5590 | ata_acpi_associate(host); | |
5591 | ||
f3187195 TH |
5592 | /* set cable, sata_spd_limit and report */ |
5593 | for (i = 0; i < host->n_ports; i++) { | |
5594 | struct ata_port *ap = host->ports[i]; | |
f3187195 TH |
5595 | unsigned long xfer_mask; |
5596 | ||
5597 | /* set SATA cable type if still unset */ | |
5598 | if (ap->cbl == ATA_CBL_NONE && (ap->flags & ATA_FLAG_SATA)) | |
5599 | ap->cbl = ATA_CBL_SATA; | |
5600 | ||
5601 | /* init sata_spd_limit to the current value */ | |
4fb37a25 | 5602 | sata_link_init_spd(&ap->link); |
f3187195 | 5603 | |
cbcdd875 | 5604 | /* print per-port info to dmesg */ |
f3187195 TH |
5605 | xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask, |
5606 | ap->udma_mask); | |
5607 | ||
abf6e8ed | 5608 | if (!ata_port_is_dummy(ap)) { |
cbcdd875 TH |
5609 | ata_port_printk(ap, KERN_INFO, |
5610 | "%cATA max %s %s\n", | |
a16abc0b | 5611 | (ap->flags & ATA_FLAG_SATA) ? 'S' : 'P', |
f3187195 | 5612 | ata_mode_string(xfer_mask), |
cbcdd875 | 5613 | ap->link.eh_info.desc); |
abf6e8ed TH |
5614 | ata_ehi_clear_desc(&ap->link.eh_info); |
5615 | } else | |
f3187195 TH |
5616 | ata_port_printk(ap, KERN_INFO, "DUMMY\n"); |
5617 | } | |
5618 | ||
5619 | /* perform each probe synchronously */ | |
5620 | DPRINTK("probe begin\n"); | |
5621 | for (i = 0; i < host->n_ports; i++) { | |
5622 | struct ata_port *ap = host->ports[i]; | |
f3187195 TH |
5623 | |
5624 | /* probe */ | |
5625 | if (ap->ops->error_handler) { | |
9af5c9c9 | 5626 | struct ata_eh_info *ehi = &ap->link.eh_info; |
f3187195 TH |
5627 | unsigned long flags; |
5628 | ||
5629 | ata_port_probe(ap); | |
5630 | ||
5631 | /* kick EH for boot probing */ | |
5632 | spin_lock_irqsave(ap->lock, flags); | |
5633 | ||
b558eddd | 5634 | ehi->probe_mask |= ATA_ALL_DEVICES; |
391191c1 | 5635 | ehi->action |= ATA_EH_RESET | ATA_EH_LPM; |
f3187195 TH |
5636 | ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; |
5637 | ||
f4d6d004 | 5638 | ap->pflags &= ~ATA_PFLAG_INITIALIZING; |
f3187195 TH |
5639 | ap->pflags |= ATA_PFLAG_LOADING; |
5640 | ata_port_schedule_eh(ap); | |
5641 | ||
5642 | spin_unlock_irqrestore(ap->lock, flags); | |
5643 | ||
5644 | /* wait for EH to finish */ | |
5645 | ata_port_wait_eh(ap); | |
5646 | } else { | |
5647 | DPRINTK("ata%u: bus probe begin\n", ap->print_id); | |
5648 | rc = ata_bus_probe(ap); | |
5649 | DPRINTK("ata%u: bus probe end\n", ap->print_id); | |
5650 | ||
5651 | if (rc) { | |
5652 | /* FIXME: do something useful here? | |
5653 | * Current libata behavior will | |
5654 | * tear down everything when | |
5655 | * the module is removed | |
5656 | * or the h/w is unplugged. | |
5657 | */ | |
5658 | } | |
5659 | } | |
5660 | } | |
5661 | ||
5662 | /* probes are done, now scan each port's disk(s) */ | |
5663 | DPRINTK("host probe begin\n"); | |
5664 | for (i = 0; i < host->n_ports; i++) { | |
5665 | struct ata_port *ap = host->ports[i]; | |
5666 | ||
1ae46317 | 5667 | ata_scsi_scan_host(ap, 1); |
f3187195 TH |
5668 | } |
5669 | ||
5670 | return 0; | |
5671 | } | |
5672 | ||
f5cda257 TH |
5673 | /** |
5674 | * ata_host_activate - start host, request IRQ and register it | |
5675 | * @host: target ATA host | |
5676 | * @irq: IRQ to request | |
5677 | * @irq_handler: irq_handler used when requesting IRQ | |
5678 | * @irq_flags: irq_flags used when requesting IRQ | |
5679 | * @sht: scsi_host_template to use when registering the host | |
5680 | * | |
5681 | * After allocating an ATA host and initializing it, most libata | |
5682 | * LLDs perform three steps to activate the host - start host, | |
5683 | * request IRQ and register it. This helper takes necessasry | |
5684 | * arguments and performs the three steps in one go. | |
5685 | * | |
3d46b2e2 PM |
5686 | * An invalid IRQ skips the IRQ registration and expects the host to |
5687 | * have set polling mode on the port. In this case, @irq_handler | |
5688 | * should be NULL. | |
5689 | * | |
f5cda257 TH |
5690 | * LOCKING: |
5691 | * Inherited from calling layer (may sleep). | |
5692 | * | |
5693 | * RETURNS: | |
5694 | * 0 on success, -errno otherwise. | |
5695 | */ | |
5696 | int ata_host_activate(struct ata_host *host, int irq, | |
5697 | irq_handler_t irq_handler, unsigned long irq_flags, | |
5698 | struct scsi_host_template *sht) | |
5699 | { | |
cbcdd875 | 5700 | int i, rc; |
f5cda257 TH |
5701 | |
5702 | rc = ata_host_start(host); | |
5703 | if (rc) | |
5704 | return rc; | |
5705 | ||
3d46b2e2 PM |
5706 | /* Special case for polling mode */ |
5707 | if (!irq) { | |
5708 | WARN_ON(irq_handler); | |
5709 | return ata_host_register(host, sht); | |
5710 | } | |
5711 | ||
f5cda257 TH |
5712 | rc = devm_request_irq(host->dev, irq, irq_handler, irq_flags, |
5713 | dev_driver_string(host->dev), host); | |
5714 | if (rc) | |
5715 | return rc; | |
5716 | ||
cbcdd875 TH |
5717 | for (i = 0; i < host->n_ports; i++) |
5718 | ata_port_desc(host->ports[i], "irq %d", irq); | |
4031826b | 5719 | |
f5cda257 TH |
5720 | rc = ata_host_register(host, sht); |
5721 | /* if failed, just free the IRQ and leave ports alone */ | |
5722 | if (rc) | |
5723 | devm_free_irq(host->dev, irq, host); | |
5724 | ||
5725 | return rc; | |
5726 | } | |
5727 | ||
720ba126 TH |
5728 | /** |
5729 | * ata_port_detach - Detach ATA port in prepration of device removal | |
5730 | * @ap: ATA port to be detached | |
5731 | * | |
5732 | * Detach all ATA devices and the associated SCSI devices of @ap; | |
5733 | * then, remove the associated SCSI host. @ap is guaranteed to | |
5734 | * be quiescent on return from this function. | |
5735 | * | |
5736 | * LOCKING: | |
5737 | * Kernel thread context (may sleep). | |
5738 | */ | |
741b7763 | 5739 | static void ata_port_detach(struct ata_port *ap) |
720ba126 TH |
5740 | { |
5741 | unsigned long flags; | |
41bda9c9 | 5742 | struct ata_link *link; |
f58229f8 | 5743 | struct ata_device *dev; |
720ba126 TH |
5744 | |
5745 | if (!ap->ops->error_handler) | |
c3cf30a9 | 5746 | goto skip_eh; |
720ba126 TH |
5747 | |
5748 | /* tell EH we're leaving & flush EH */ | |
ba6a1308 | 5749 | spin_lock_irqsave(ap->lock, flags); |
b51e9e5d | 5750 | ap->pflags |= ATA_PFLAG_UNLOADING; |
ba6a1308 | 5751 | spin_unlock_irqrestore(ap->lock, flags); |
720ba126 TH |
5752 | |
5753 | ata_port_wait_eh(ap); | |
5754 | ||
7f9ad9b8 TH |
5755 | /* EH is now guaranteed to see UNLOADING - EH context belongs |
5756 | * to us. Disable all existing devices. | |
720ba126 | 5757 | */ |
41bda9c9 TH |
5758 | ata_port_for_each_link(link, ap) { |
5759 | ata_link_for_each_dev(dev, link) | |
5760 | ata_dev_disable(dev); | |
5761 | } | |
720ba126 | 5762 | |
720ba126 TH |
5763 | /* Final freeze & EH. All in-flight commands are aborted. EH |
5764 | * will be skipped and retrials will be terminated with bad | |
5765 | * target. | |
5766 | */ | |
ba6a1308 | 5767 | spin_lock_irqsave(ap->lock, flags); |
720ba126 | 5768 | ata_port_freeze(ap); /* won't be thawed */ |
ba6a1308 | 5769 | spin_unlock_irqrestore(ap->lock, flags); |
720ba126 TH |
5770 | |
5771 | ata_port_wait_eh(ap); | |
45a66c1c | 5772 | cancel_rearming_delayed_work(&ap->hotplug_task); |
720ba126 | 5773 | |
c3cf30a9 | 5774 | skip_eh: |
720ba126 | 5775 | /* remove the associated SCSI host */ |
cca3974e | 5776 | scsi_remove_host(ap->scsi_host); |
720ba126 TH |
5777 | } |
5778 | ||
0529c159 TH |
5779 | /** |
5780 | * ata_host_detach - Detach all ports of an ATA host | |
5781 | * @host: Host to detach | |
5782 | * | |
5783 | * Detach all ports of @host. | |
5784 | * | |
5785 | * LOCKING: | |
5786 | * Kernel thread context (may sleep). | |
5787 | */ | |
5788 | void ata_host_detach(struct ata_host *host) | |
5789 | { | |
5790 | int i; | |
5791 | ||
5792 | for (i = 0; i < host->n_ports; i++) | |
5793 | ata_port_detach(host->ports[i]); | |
562f0c2d TH |
5794 | |
5795 | /* the host is dead now, dissociate ACPI */ | |
5796 | ata_acpi_dissociate(host); | |
0529c159 TH |
5797 | } |
5798 | ||
374b1873 JG |
5799 | #ifdef CONFIG_PCI |
5800 | ||
1da177e4 LT |
5801 | /** |
5802 | * ata_pci_remove_one - PCI layer callback for device removal | |
5803 | * @pdev: PCI device that was removed | |
5804 | * | |
b878ca5d TH |
5805 | * PCI layer indicates to libata via this hook that hot-unplug or |
5806 | * module unload event has occurred. Detach all ports. Resource | |
5807 | * release is handled via devres. | |
1da177e4 LT |
5808 | * |
5809 | * LOCKING: | |
5810 | * Inherited from PCI layer (may sleep). | |
5811 | */ | |
f0d36efd | 5812 | void ata_pci_remove_one(struct pci_dev *pdev) |
1da177e4 | 5813 | { |
2855568b | 5814 | struct device *dev = &pdev->dev; |
cca3974e | 5815 | struct ata_host *host = dev_get_drvdata(dev); |
1da177e4 | 5816 | |
b878ca5d | 5817 | ata_host_detach(host); |
1da177e4 LT |
5818 | } |
5819 | ||
5820 | /* move to PCI subsystem */ | |
057ace5e | 5821 | int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) |
1da177e4 LT |
5822 | { |
5823 | unsigned long tmp = 0; | |
5824 | ||
5825 | switch (bits->width) { | |
5826 | case 1: { | |
5827 | u8 tmp8 = 0; | |
5828 | pci_read_config_byte(pdev, bits->reg, &tmp8); | |
5829 | tmp = tmp8; | |
5830 | break; | |
5831 | } | |
5832 | case 2: { | |
5833 | u16 tmp16 = 0; | |
5834 | pci_read_config_word(pdev, bits->reg, &tmp16); | |
5835 | tmp = tmp16; | |
5836 | break; | |
5837 | } | |
5838 | case 4: { | |
5839 | u32 tmp32 = 0; | |
5840 | pci_read_config_dword(pdev, bits->reg, &tmp32); | |
5841 | tmp = tmp32; | |
5842 | break; | |
5843 | } | |
5844 | ||
5845 | default: | |
5846 | return -EINVAL; | |
5847 | } | |
5848 | ||
5849 | tmp &= bits->mask; | |
5850 | ||
5851 | return (tmp == bits->val) ? 1 : 0; | |
5852 | } | |
9b847548 | 5853 | |
6ffa01d8 | 5854 | #ifdef CONFIG_PM |
3c5100c1 | 5855 | void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg) |
9b847548 JA |
5856 | { |
5857 | pci_save_state(pdev); | |
4c90d971 | 5858 | pci_disable_device(pdev); |
500530f6 | 5859 | |
3a2d5b70 | 5860 | if (mesg.event & PM_EVENT_SLEEP) |
500530f6 | 5861 | pci_set_power_state(pdev, PCI_D3hot); |
9b847548 JA |
5862 | } |
5863 | ||
553c4aa6 | 5864 | int ata_pci_device_do_resume(struct pci_dev *pdev) |
9b847548 | 5865 | { |
553c4aa6 TH |
5866 | int rc; |
5867 | ||
9b847548 JA |
5868 | pci_set_power_state(pdev, PCI_D0); |
5869 | pci_restore_state(pdev); | |
553c4aa6 | 5870 | |
b878ca5d | 5871 | rc = pcim_enable_device(pdev); |
553c4aa6 TH |
5872 | if (rc) { |
5873 | dev_printk(KERN_ERR, &pdev->dev, | |
5874 | "failed to enable device after resume (%d)\n", rc); | |
5875 | return rc; | |
5876 | } | |
5877 | ||
9b847548 | 5878 | pci_set_master(pdev); |
553c4aa6 | 5879 | return 0; |
500530f6 TH |
5880 | } |
5881 | ||
3c5100c1 | 5882 | int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) |
500530f6 | 5883 | { |
cca3974e | 5884 | struct ata_host *host = dev_get_drvdata(&pdev->dev); |
500530f6 TH |
5885 | int rc = 0; |
5886 | ||
cca3974e | 5887 | rc = ata_host_suspend(host, mesg); |
500530f6 TH |
5888 | if (rc) |
5889 | return rc; | |
5890 | ||
3c5100c1 | 5891 | ata_pci_device_do_suspend(pdev, mesg); |
500530f6 TH |
5892 | |
5893 | return 0; | |
5894 | } | |
5895 | ||
5896 | int ata_pci_device_resume(struct pci_dev *pdev) | |
5897 | { | |
cca3974e | 5898 | struct ata_host *host = dev_get_drvdata(&pdev->dev); |
553c4aa6 | 5899 | int rc; |
500530f6 | 5900 | |
553c4aa6 TH |
5901 | rc = ata_pci_device_do_resume(pdev); |
5902 | if (rc == 0) | |
5903 | ata_host_resume(host); | |
5904 | return rc; | |
9b847548 | 5905 | } |
6ffa01d8 TH |
5906 | #endif /* CONFIG_PM */ |
5907 | ||
1da177e4 LT |
5908 | #endif /* CONFIG_PCI */ |
5909 | ||
33267325 TH |
5910 | static int __init ata_parse_force_one(char **cur, |
5911 | struct ata_force_ent *force_ent, | |
5912 | const char **reason) | |
5913 | { | |
5914 | /* FIXME: Currently, there's no way to tag init const data and | |
5915 | * using __initdata causes build failure on some versions of | |
5916 | * gcc. Once __initdataconst is implemented, add const to the | |
5917 | * following structure. | |
5918 | */ | |
5919 | static struct ata_force_param force_tbl[] __initdata = { | |
5920 | { "40c", .cbl = ATA_CBL_PATA40 }, | |
5921 | { "80c", .cbl = ATA_CBL_PATA80 }, | |
5922 | { "short40c", .cbl = ATA_CBL_PATA40_SHORT }, | |
5923 | { "unk", .cbl = ATA_CBL_PATA_UNK }, | |
5924 | { "ign", .cbl = ATA_CBL_PATA_IGN }, | |
5925 | { "sata", .cbl = ATA_CBL_SATA }, | |
5926 | { "1.5Gbps", .spd_limit = 1 }, | |
5927 | { "3.0Gbps", .spd_limit = 2 }, | |
5928 | { "noncq", .horkage_on = ATA_HORKAGE_NONCQ }, | |
5929 | { "ncq", .horkage_off = ATA_HORKAGE_NONCQ }, | |
5930 | { "pio0", .xfer_mask = 1 << (ATA_SHIFT_PIO + 0) }, | |
5931 | { "pio1", .xfer_mask = 1 << (ATA_SHIFT_PIO + 1) }, | |
5932 | { "pio2", .xfer_mask = 1 << (ATA_SHIFT_PIO + 2) }, | |
5933 | { "pio3", .xfer_mask = 1 << (ATA_SHIFT_PIO + 3) }, | |
5934 | { "pio4", .xfer_mask = 1 << (ATA_SHIFT_PIO + 4) }, | |
5935 | { "pio5", .xfer_mask = 1 << (ATA_SHIFT_PIO + 5) }, | |
5936 | { "pio6", .xfer_mask = 1 << (ATA_SHIFT_PIO + 6) }, | |
5937 | { "mwdma0", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 0) }, | |
5938 | { "mwdma1", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 1) }, | |
5939 | { "mwdma2", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 2) }, | |
5940 | { "mwdma3", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 3) }, | |
5941 | { "mwdma4", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 4) }, | |
5942 | { "udma0", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) }, | |
5943 | { "udma16", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) }, | |
5944 | { "udma/16", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) }, | |
5945 | { "udma1", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) }, | |
5946 | { "udma25", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) }, | |
5947 | { "udma/25", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) }, | |
5948 | { "udma2", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) }, | |
5949 | { "udma33", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) }, | |
5950 | { "udma/33", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) }, | |
5951 | { "udma3", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) }, | |
5952 | { "udma44", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) }, | |
5953 | { "udma/44", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) }, | |
5954 | { "udma4", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) }, | |
5955 | { "udma66", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) }, | |
5956 | { "udma/66", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) }, | |
5957 | { "udma5", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) }, | |
5958 | { "udma100", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) }, | |
5959 | { "udma/100", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) }, | |
5960 | { "udma6", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) }, | |
5961 | { "udma133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) }, | |
5962 | { "udma/133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) }, | |
5963 | { "udma7", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 7) }, | |
5964 | }; | |
5965 | char *start = *cur, *p = *cur; | |
5966 | char *id, *val, *endp; | |
5967 | const struct ata_force_param *match_fp = NULL; | |
5968 | int nr_matches = 0, i; | |
5969 | ||
5970 | /* find where this param ends and update *cur */ | |
5971 | while (*p != '\0' && *p != ',') | |
5972 | p++; | |
5973 | ||
5974 | if (*p == '\0') | |
5975 | *cur = p; | |
5976 | else | |
5977 | *cur = p + 1; | |
5978 | ||
5979 | *p = '\0'; | |
5980 | ||
5981 | /* parse */ | |
5982 | p = strchr(start, ':'); | |
5983 | if (!p) { | |
5984 | val = strstrip(start); | |
5985 | goto parse_val; | |
5986 | } | |
5987 | *p = '\0'; | |
5988 | ||
5989 | id = strstrip(start); | |
5990 | val = strstrip(p + 1); | |
5991 | ||
5992 | /* parse id */ | |
5993 | p = strchr(id, '.'); | |
5994 | if (p) { | |
5995 | *p++ = '\0'; | |
5996 | force_ent->device = simple_strtoul(p, &endp, 10); | |
5997 | if (p == endp || *endp != '\0') { | |
5998 | *reason = "invalid device"; | |
5999 | return -EINVAL; | |
6000 | } | |
6001 | } | |
6002 | ||
6003 | force_ent->port = simple_strtoul(id, &endp, 10); | |
6004 | if (p == endp || *endp != '\0') { | |
6005 | *reason = "invalid port/link"; | |
6006 | return -EINVAL; | |
6007 | } | |
6008 | ||
6009 | parse_val: | |
6010 | /* parse val, allow shortcuts so that both 1.5 and 1.5Gbps work */ | |
6011 | for (i = 0; i < ARRAY_SIZE(force_tbl); i++) { | |
6012 | const struct ata_force_param *fp = &force_tbl[i]; | |
6013 | ||
6014 | if (strncasecmp(val, fp->name, strlen(val))) | |
6015 | continue; | |
6016 | ||
6017 | nr_matches++; | |
6018 | match_fp = fp; | |
6019 | ||
6020 | if (strcasecmp(val, fp->name) == 0) { | |
6021 | nr_matches = 1; | |
6022 | break; | |
6023 | } | |
6024 | } | |
6025 | ||
6026 | if (!nr_matches) { | |
6027 | *reason = "unknown value"; | |
6028 | return -EINVAL; | |
6029 | } | |
6030 | if (nr_matches > 1) { | |
6031 | *reason = "ambigious value"; | |
6032 | return -EINVAL; | |
6033 | } | |
6034 | ||
6035 | force_ent->param = *match_fp; | |
6036 | ||
6037 | return 0; | |
6038 | } | |
6039 | ||
6040 | static void __init ata_parse_force_param(void) | |
6041 | { | |
6042 | int idx = 0, size = 1; | |
6043 | int last_port = -1, last_device = -1; | |
6044 | char *p, *cur, *next; | |
6045 | ||
6046 | /* calculate maximum number of params and allocate force_tbl */ | |
6047 | for (p = ata_force_param_buf; *p; p++) | |
6048 | if (*p == ',') | |
6049 | size++; | |
6050 | ||
6051 | ata_force_tbl = kzalloc(sizeof(ata_force_tbl[0]) * size, GFP_KERNEL); | |
6052 | if (!ata_force_tbl) { | |
6053 | printk(KERN_WARNING "ata: failed to extend force table, " | |
6054 | "libata.force ignored\n"); | |
6055 | return; | |
6056 | } | |
6057 | ||
6058 | /* parse and populate the table */ | |
6059 | for (cur = ata_force_param_buf; *cur != '\0'; cur = next) { | |
6060 | const char *reason = ""; | |
6061 | struct ata_force_ent te = { .port = -1, .device = -1 }; | |
6062 | ||
6063 | next = cur; | |
6064 | if (ata_parse_force_one(&next, &te, &reason)) { | |
6065 | printk(KERN_WARNING "ata: failed to parse force " | |
6066 | "parameter \"%s\" (%s)\n", | |
6067 | cur, reason); | |
6068 | continue; | |
6069 | } | |
6070 | ||
6071 | if (te.port == -1) { | |
6072 | te.port = last_port; | |
6073 | te.device = last_device; | |
6074 | } | |
6075 | ||
6076 | ata_force_tbl[idx++] = te; | |
6077 | ||
6078 | last_port = te.port; | |
6079 | last_device = te.device; | |
6080 | } | |
6081 | ||
6082 | ata_force_tbl_size = idx; | |
6083 | } | |
1da177e4 | 6084 | |
1da177e4 LT |
6085 | static int __init ata_init(void) |
6086 | { | |
33267325 TH |
6087 | ata_parse_force_param(); |
6088 | ||
1da177e4 LT |
6089 | ata_wq = create_workqueue("ata"); |
6090 | if (!ata_wq) | |
6091 | return -ENOMEM; | |
6092 | ||
453b07ac TH |
6093 | ata_aux_wq = create_singlethread_workqueue("ata_aux"); |
6094 | if (!ata_aux_wq) { | |
6095 | destroy_workqueue(ata_wq); | |
6096 | return -ENOMEM; | |
6097 | } | |
6098 | ||
1da177e4 LT |
6099 | printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n"); |
6100 | return 0; | |
6101 | } | |
6102 | ||
6103 | static void __exit ata_exit(void) | |
6104 | { | |
33267325 | 6105 | kfree(ata_force_tbl); |
1da177e4 | 6106 | destroy_workqueue(ata_wq); |
453b07ac | 6107 | destroy_workqueue(ata_aux_wq); |
1da177e4 LT |
6108 | } |
6109 | ||
a4625085 | 6110 | subsys_initcall(ata_init); |
1da177e4 LT |
6111 | module_exit(ata_exit); |
6112 | ||
67846b30 | 6113 | static unsigned long ratelimit_time; |
34af946a | 6114 | static DEFINE_SPINLOCK(ata_ratelimit_lock); |
67846b30 JG |
6115 | |
6116 | int ata_ratelimit(void) | |
6117 | { | |
6118 | int rc; | |
6119 | unsigned long flags; | |
6120 | ||
6121 | spin_lock_irqsave(&ata_ratelimit_lock, flags); | |
6122 | ||
6123 | if (time_after(jiffies, ratelimit_time)) { | |
6124 | rc = 1; | |
6125 | ratelimit_time = jiffies + (HZ/5); | |
6126 | } else | |
6127 | rc = 0; | |
6128 | ||
6129 | spin_unlock_irqrestore(&ata_ratelimit_lock, flags); | |
6130 | ||
6131 | return rc; | |
6132 | } | |
6133 | ||
c22daff4 TH |
6134 | /** |
6135 | * ata_wait_register - wait until register value changes | |
6136 | * @reg: IO-mapped register | |
6137 | * @mask: Mask to apply to read register value | |
6138 | * @val: Wait condition | |
341c2c95 TH |
6139 | * @interval: polling interval in milliseconds |
6140 | * @timeout: timeout in milliseconds | |
c22daff4 TH |
6141 | * |
6142 | * Waiting for some bits of register to change is a common | |
6143 | * operation for ATA controllers. This function reads 32bit LE | |
6144 | * IO-mapped register @reg and tests for the following condition. | |
6145 | * | |
6146 | * (*@reg & mask) != val | |
6147 | * | |
6148 | * If the condition is met, it returns; otherwise, the process is | |
6149 | * repeated after @interval_msec until timeout. | |
6150 | * | |
6151 | * LOCKING: | |
6152 | * Kernel thread context (may sleep) | |
6153 | * | |
6154 | * RETURNS: | |
6155 | * The final register value. | |
6156 | */ | |
6157 | u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, | |
341c2c95 | 6158 | unsigned long interval, unsigned long timeout) |
c22daff4 | 6159 | { |
341c2c95 | 6160 | unsigned long deadline; |
c22daff4 TH |
6161 | u32 tmp; |
6162 | ||
6163 | tmp = ioread32(reg); | |
6164 | ||
6165 | /* Calculate timeout _after_ the first read to make sure | |
6166 | * preceding writes reach the controller before starting to | |
6167 | * eat away the timeout. | |
6168 | */ | |
341c2c95 | 6169 | deadline = ata_deadline(jiffies, timeout); |
c22daff4 | 6170 | |
341c2c95 TH |
6171 | while ((tmp & mask) == val && time_before(jiffies, deadline)) { |
6172 | msleep(interval); | |
c22daff4 TH |
6173 | tmp = ioread32(reg); |
6174 | } | |
6175 | ||
6176 | return tmp; | |
6177 | } | |
6178 | ||
dd5b06c4 TH |
6179 | /* |
6180 | * Dummy port_ops | |
6181 | */ | |
182d7bba | 6182 | static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc) |
dd5b06c4 | 6183 | { |
182d7bba | 6184 | return AC_ERR_SYSTEM; |
dd5b06c4 TH |
6185 | } |
6186 | ||
182d7bba | 6187 | static void ata_dummy_error_handler(struct ata_port *ap) |
dd5b06c4 | 6188 | { |
182d7bba | 6189 | /* truly dummy */ |
dd5b06c4 TH |
6190 | } |
6191 | ||
029cfd6b | 6192 | struct ata_port_operations ata_dummy_port_ops = { |
dd5b06c4 TH |
6193 | .qc_prep = ata_noop_qc_prep, |
6194 | .qc_issue = ata_dummy_qc_issue, | |
182d7bba | 6195 | .error_handler = ata_dummy_error_handler, |
dd5b06c4 TH |
6196 | }; |
6197 | ||
21b0ad4f TH |
6198 | const struct ata_port_info ata_dummy_port_info = { |
6199 | .port_ops = &ata_dummy_port_ops, | |
6200 | }; | |
6201 | ||
1da177e4 LT |
6202 | /* |
6203 | * libata is essentially a library of internal helper functions for | |
6204 | * low-level ATA host controller drivers. As such, the API/ABI is | |
6205 | * likely to change as new drivers are added and updated. | |
6206 | * Do not depend on ABI/API stability. | |
6207 | */ | |
e9c83914 TH |
6208 | EXPORT_SYMBOL_GPL(sata_deb_timing_normal); |
6209 | EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug); | |
6210 | EXPORT_SYMBOL_GPL(sata_deb_timing_long); | |
029cfd6b TH |
6211 | EXPORT_SYMBOL_GPL(ata_base_port_ops); |
6212 | EXPORT_SYMBOL_GPL(sata_port_ops); | |
dd5b06c4 | 6213 | EXPORT_SYMBOL_GPL(ata_dummy_port_ops); |
21b0ad4f | 6214 | EXPORT_SYMBOL_GPL(ata_dummy_port_info); |
1da177e4 | 6215 | EXPORT_SYMBOL_GPL(ata_std_bios_param); |
cca3974e | 6216 | EXPORT_SYMBOL_GPL(ata_host_init); |
f3187195 | 6217 | EXPORT_SYMBOL_GPL(ata_host_alloc); |
f5cda257 | 6218 | EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo); |
ecef7253 | 6219 | EXPORT_SYMBOL_GPL(ata_host_start); |
f3187195 | 6220 | EXPORT_SYMBOL_GPL(ata_host_register); |
f5cda257 | 6221 | EXPORT_SYMBOL_GPL(ata_host_activate); |
0529c159 | 6222 | EXPORT_SYMBOL_GPL(ata_host_detach); |
1da177e4 | 6223 | EXPORT_SYMBOL_GPL(ata_sg_init); |
f686bcb8 | 6224 | EXPORT_SYMBOL_GPL(ata_qc_complete); |
dedaf2b0 | 6225 | EXPORT_SYMBOL_GPL(ata_qc_complete_multiple); |
436d34b3 | 6226 | EXPORT_SYMBOL_GPL(atapi_cmd_type); |
1da177e4 LT |
6227 | EXPORT_SYMBOL_GPL(ata_tf_to_fis); |
6228 | EXPORT_SYMBOL_GPL(ata_tf_from_fis); | |
6357357c TH |
6229 | EXPORT_SYMBOL_GPL(ata_pack_xfermask); |
6230 | EXPORT_SYMBOL_GPL(ata_unpack_xfermask); | |
6231 | EXPORT_SYMBOL_GPL(ata_xfer_mask2mode); | |
6232 | EXPORT_SYMBOL_GPL(ata_xfer_mode2mask); | |
6233 | EXPORT_SYMBOL_GPL(ata_xfer_mode2shift); | |
6234 | EXPORT_SYMBOL_GPL(ata_mode_string); | |
6235 | EXPORT_SYMBOL_GPL(ata_id_xfermask); | |
1da177e4 | 6236 | EXPORT_SYMBOL_GPL(ata_port_start); |
04351821 | 6237 | EXPORT_SYMBOL_GPL(ata_do_set_mode); |
31cc23b3 | 6238 | EXPORT_SYMBOL_GPL(ata_std_qc_defer); |
e46834cd | 6239 | EXPORT_SYMBOL_GPL(ata_noop_qc_prep); |
1da177e4 | 6240 | EXPORT_SYMBOL_GPL(ata_port_probe); |
10305f0f | 6241 | EXPORT_SYMBOL_GPL(ata_dev_disable); |
3c567b7d | 6242 | EXPORT_SYMBOL_GPL(sata_set_spd); |
aa2731ad | 6243 | EXPORT_SYMBOL_GPL(ata_wait_after_reset); |
936fd732 TH |
6244 | EXPORT_SYMBOL_GPL(sata_link_debounce); |
6245 | EXPORT_SYMBOL_GPL(sata_link_resume); | |
0aa1113d | 6246 | EXPORT_SYMBOL_GPL(ata_std_prereset); |
cc0680a5 | 6247 | EXPORT_SYMBOL_GPL(sata_link_hardreset); |
57c9efdf | 6248 | EXPORT_SYMBOL_GPL(sata_std_hardreset); |
203c75b8 | 6249 | EXPORT_SYMBOL_GPL(ata_std_postreset); |
2e9edbf8 JG |
6250 | EXPORT_SYMBOL_GPL(ata_dev_classify); |
6251 | EXPORT_SYMBOL_GPL(ata_dev_pair); | |
1da177e4 | 6252 | EXPORT_SYMBOL_GPL(ata_port_disable); |
67846b30 | 6253 | EXPORT_SYMBOL_GPL(ata_ratelimit); |
c22daff4 | 6254 | EXPORT_SYMBOL_GPL(ata_wait_register); |
1da177e4 LT |
6255 | EXPORT_SYMBOL_GPL(ata_scsi_ioctl); |
6256 | EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); | |
1da177e4 | 6257 | EXPORT_SYMBOL_GPL(ata_scsi_slave_config); |
83c47bcb | 6258 | EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy); |
a6e6ce8e | 6259 | EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth); |
34bf2170 TH |
6260 | EXPORT_SYMBOL_GPL(sata_scr_valid); |
6261 | EXPORT_SYMBOL_GPL(sata_scr_read); | |
6262 | EXPORT_SYMBOL_GPL(sata_scr_write); | |
6263 | EXPORT_SYMBOL_GPL(sata_scr_write_flush); | |
936fd732 TH |
6264 | EXPORT_SYMBOL_GPL(ata_link_online); |
6265 | EXPORT_SYMBOL_GPL(ata_link_offline); | |
6ffa01d8 | 6266 | #ifdef CONFIG_PM |
cca3974e JG |
6267 | EXPORT_SYMBOL_GPL(ata_host_suspend); |
6268 | EXPORT_SYMBOL_GPL(ata_host_resume); | |
6ffa01d8 | 6269 | #endif /* CONFIG_PM */ |
6a62a04d TH |
6270 | EXPORT_SYMBOL_GPL(ata_id_string); |
6271 | EXPORT_SYMBOL_GPL(ata_id_c_string); | |
1da177e4 LT |
6272 | EXPORT_SYMBOL_GPL(ata_scsi_simulate); |
6273 | ||
1bc4ccff | 6274 | EXPORT_SYMBOL_GPL(ata_pio_need_iordy); |
6357357c | 6275 | EXPORT_SYMBOL_GPL(ata_timing_find_mode); |
452503f9 AC |
6276 | EXPORT_SYMBOL_GPL(ata_timing_compute); |
6277 | EXPORT_SYMBOL_GPL(ata_timing_merge); | |
a0f79b92 | 6278 | EXPORT_SYMBOL_GPL(ata_timing_cycle2mode); |
452503f9 | 6279 | |
1da177e4 LT |
6280 | #ifdef CONFIG_PCI |
6281 | EXPORT_SYMBOL_GPL(pci_test_config_bits); | |
1da177e4 | 6282 | EXPORT_SYMBOL_GPL(ata_pci_remove_one); |
6ffa01d8 | 6283 | #ifdef CONFIG_PM |
500530f6 TH |
6284 | EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend); |
6285 | EXPORT_SYMBOL_GPL(ata_pci_device_do_resume); | |
9b847548 JA |
6286 | EXPORT_SYMBOL_GPL(ata_pci_device_suspend); |
6287 | EXPORT_SYMBOL_GPL(ata_pci_device_resume); | |
6ffa01d8 | 6288 | #endif /* CONFIG_PM */ |
1da177e4 | 6289 | #endif /* CONFIG_PCI */ |
9b847548 | 6290 | |
b64bbc39 TH |
6291 | EXPORT_SYMBOL_GPL(__ata_ehi_push_desc); |
6292 | EXPORT_SYMBOL_GPL(ata_ehi_push_desc); | |
6293 | EXPORT_SYMBOL_GPL(ata_ehi_clear_desc); | |
cbcdd875 TH |
6294 | EXPORT_SYMBOL_GPL(ata_port_desc); |
6295 | #ifdef CONFIG_PCI | |
6296 | EXPORT_SYMBOL_GPL(ata_port_pbar_desc); | |
6297 | #endif /* CONFIG_PCI */ | |
7b70fc03 | 6298 | EXPORT_SYMBOL_GPL(ata_port_schedule_eh); |
dbd82616 | 6299 | EXPORT_SYMBOL_GPL(ata_link_abort); |
7b70fc03 | 6300 | EXPORT_SYMBOL_GPL(ata_port_abort); |
e3180499 | 6301 | EXPORT_SYMBOL_GPL(ata_port_freeze); |
7d77b247 | 6302 | EXPORT_SYMBOL_GPL(sata_async_notification); |
e3180499 TH |
6303 | EXPORT_SYMBOL_GPL(ata_eh_freeze_port); |
6304 | EXPORT_SYMBOL_GPL(ata_eh_thaw_port); | |
ece1d636 TH |
6305 | EXPORT_SYMBOL_GPL(ata_eh_qc_complete); |
6306 | EXPORT_SYMBOL_GPL(ata_eh_qc_retry); | |
10acf3b0 | 6307 | EXPORT_SYMBOL_GPL(ata_eh_analyze_ncq_error); |
022bdb07 | 6308 | EXPORT_SYMBOL_GPL(ata_do_eh); |
a1efdaba | 6309 | EXPORT_SYMBOL_GPL(ata_std_error_handler); |
be0d18df AC |
6310 | |
6311 | EXPORT_SYMBOL_GPL(ata_cable_40wire); | |
6312 | EXPORT_SYMBOL_GPL(ata_cable_80wire); | |
6313 | EXPORT_SYMBOL_GPL(ata_cable_unknown); | |
c88f90c3 | 6314 | EXPORT_SYMBOL_GPL(ata_cable_ignore); |
be0d18df | 6315 | EXPORT_SYMBOL_GPL(ata_cable_sata); |