Commit | Line | Data |
---|---|---|
669a5db4 JG |
1 | /* |
2 | * pata_amd.c - AMD PATA for new ATA layer | |
3 | * (C) 2005-2006 Red Hat Inc | |
4 | * Alan Cox <alan@redhat.com> | |
5 | * | |
6 | * Based on pata-sil680. Errata information is taken from data sheets | |
7 | * and the amd74xx.c driver by Vojtech Pavlik. Nvidia SATA devices are | |
8 | * claimed by sata-nv.c. | |
9 | * | |
10 | * TODO: | |
11 | * Variable system clock when/if it makes sense | |
12 | * Power management on ports | |
13 | * | |
14 | * | |
15 | * Documentation publically available. | |
16 | */ | |
17 | ||
18 | #include <linux/kernel.h> | |
19 | #include <linux/module.h> | |
20 | #include <linux/pci.h> | |
21 | #include <linux/init.h> | |
22 | #include <linux/blkdev.h> | |
23 | #include <linux/delay.h> | |
24 | #include <scsi/scsi_host.h> | |
25 | #include <linux/libata.h> | |
26 | ||
27 | #define DRV_NAME "pata_amd" | |
eb4a2c7f | 28 | #define DRV_VERSION "0.3.8" |
669a5db4 JG |
29 | |
30 | /** | |
31 | * timing_setup - shared timing computation and load | |
32 | * @ap: ATA port being set up | |
33 | * @adev: drive being configured | |
34 | * @offset: port offset | |
35 | * @speed: target speed | |
36 | * @clock: clock multiplier (number of times 33MHz for this part) | |
37 | * | |
38 | * Perform the actual timing set up for Nvidia or AMD PATA devices. | |
39 | * The actual devices vary so they all call into this helper function | |
40 | * providing the clock multipler and offset (because AMD and Nvidia put | |
41 | * the ports at different locations). | |
42 | */ | |
43 | ||
44 | static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offset, int speed, int clock) | |
45 | { | |
46 | static const unsigned char amd_cyc2udma[] = { | |
47 | 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 | |
48 | }; | |
49 | ||
50 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
51 | struct ata_device *peer = ata_dev_pair(adev); | |
52 | int dn = ap->port_no * 2 + adev->devno; | |
53 | struct ata_timing at, apeer; | |
54 | int T, UT; | |
55 | const int amd_clock = 33333; /* KHz. */ | |
56 | u8 t; | |
57 | ||
58 | T = 1000000000 / amd_clock; | |
59 | UT = T / min_t(int, max_t(int, clock, 1), 2); | |
60 | ||
61 | if (ata_timing_compute(adev, speed, &at, T, UT) < 0) { | |
62 | dev_printk(KERN_ERR, &pdev->dev, "unknown mode %d.\n", speed); | |
63 | return; | |
64 | } | |
65 | ||
66 | if (peer) { | |
67 | /* This may be over conservative */ | |
68 | if (peer->dma_mode) { | |
69 | ata_timing_compute(peer, peer->dma_mode, &apeer, T, UT); | |
70 | ata_timing_merge(&apeer, &at, &at, ATA_TIMING_8BIT); | |
71 | } | |
72 | ata_timing_compute(peer, peer->pio_mode, &apeer, T, UT); | |
73 | ata_timing_merge(&apeer, &at, &at, ATA_TIMING_8BIT); | |
74 | } | |
75 | ||
76 | if (speed == XFER_UDMA_5 && amd_clock <= 33333) at.udma = 1; | |
77 | if (speed == XFER_UDMA_6 && amd_clock <= 33333) at.udma = 15; | |
78 | ||
79 | /* | |
80 | * Now do the setup work | |
81 | */ | |
82 | ||
83 | /* Configure the address set up timing */ | |
84 | pci_read_config_byte(pdev, offset + 0x0C, &t); | |
85 | t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(at.setup, 1, 4) - 1) << ((3 - dn) << 1)); | |
86 | pci_write_config_byte(pdev, offset + 0x0C , t); | |
87 | ||
88 | /* Configure the 8bit I/O timing */ | |
89 | pci_write_config_byte(pdev, offset + 0x0E + (1 - (dn >> 1)), | |
90 | ((FIT(at.act8b, 1, 16) - 1) << 4) | (FIT(at.rec8b, 1, 16) - 1)); | |
91 | ||
92 | /* Drive timing */ | |
93 | pci_write_config_byte(pdev, offset + 0x08 + (3 - dn), | |
94 | ((FIT(at.active, 1, 16) - 1) << 4) | (FIT(at.recover, 1, 16) - 1)); | |
95 | ||
96 | switch (clock) { | |
97 | case 1: | |
98 | t = at.udma ? (0xc0 | (FIT(at.udma, 2, 5) - 2)) : 0x03; | |
99 | break; | |
100 | ||
101 | case 2: | |
102 | t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 2, 10)]) : 0x03; | |
103 | break; | |
104 | ||
105 | case 3: | |
106 | t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 10)]) : 0x03; | |
107 | break; | |
108 | ||
109 | case 4: | |
110 | t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 15)]) : 0x03; | |
111 | break; | |
112 | ||
113 | default: | |
114 | return; | |
115 | } | |
116 | ||
117 | /* UDMA timing */ | |
118 | pci_write_config_byte(pdev, offset + 0x10 + (3 - dn), t); | |
119 | } | |
120 | ||
121 | /** | |
eb4a2c7f | 122 | * amd_probe_init - perform reset handling |
669a5db4 JG |
123 | * @ap: ATA port |
124 | * | |
eb4a2c7f AC |
125 | * Reset sequence checking enable bits to see which ports are |
126 | * active. | |
669a5db4 JG |
127 | */ |
128 | ||
129 | static int amd_pre_reset(struct ata_port *ap) | |
130 | { | |
669a5db4 JG |
131 | static const struct pci_bits amd_enable_bits[] = { |
132 | { 0x40, 1, 0x02, 0x02 }, | |
133 | { 0x40, 1, 0x01, 0x01 } | |
134 | }; | |
135 | ||
136 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
85cd7251 | 137 | |
c961922b AC |
138 | if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) |
139 | return -ENOENT; | |
669a5db4 | 140 | |
669a5db4 JG |
141 | return ata_std_prereset(ap); |
142 | ||
143 | } | |
144 | ||
145 | static void amd_error_handler(struct ata_port *ap) | |
146 | { | |
147 | return ata_bmdma_drive_eh(ap, amd_pre_reset, | |
148 | ata_std_softreset, NULL, | |
149 | ata_std_postreset); | |
150 | } | |
151 | ||
eb4a2c7f | 152 | static int amd_cable_detect(struct ata_port *ap) |
669a5db4 | 153 | { |
eb4a2c7f | 154 | static const u32 bitmask[2] = {0x03, 0x0C}; |
669a5db4 | 155 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
eb4a2c7f | 156 | u8 ata66; |
669a5db4 | 157 | |
eb4a2c7f AC |
158 | pci_read_config_byte(pdev, 0x42, &ata66); |
159 | if (ata66 & bitmask[ap->port_no]) | |
160 | return ATA_CBL_PATA80; | |
161 | return ATA_CBL_PATA40; | |
669a5db4 JG |
162 | } |
163 | ||
164 | /** | |
165 | * amd33_set_piomode - set initial PIO mode data | |
166 | * @ap: ATA interface | |
167 | * @adev: ATA device | |
168 | * | |
169 | * Program the AMD registers for PIO mode. | |
170 | */ | |
171 | ||
172 | static void amd33_set_piomode(struct ata_port *ap, struct ata_device *adev) | |
173 | { | |
174 | timing_setup(ap, adev, 0x40, adev->pio_mode, 1); | |
175 | } | |
176 | ||
177 | static void amd66_set_piomode(struct ata_port *ap, struct ata_device *adev) | |
178 | { | |
179 | timing_setup(ap, adev, 0x40, adev->pio_mode, 2); | |
180 | } | |
181 | ||
182 | static void amd100_set_piomode(struct ata_port *ap, struct ata_device *adev) | |
183 | { | |
184 | timing_setup(ap, adev, 0x40, adev->pio_mode, 3); | |
185 | } | |
186 | ||
187 | static void amd133_set_piomode(struct ata_port *ap, struct ata_device *adev) | |
188 | { | |
189 | timing_setup(ap, adev, 0x40, adev->pio_mode, 4); | |
190 | } | |
191 | ||
192 | /** | |
193 | * amd33_set_dmamode - set initial DMA mode data | |
194 | * @ap: ATA interface | |
195 | * @adev: ATA device | |
196 | * | |
197 | * Program the MWDMA/UDMA modes for the AMD and Nvidia | |
198 | * chipset. | |
199 | */ | |
200 | ||
201 | static void amd33_set_dmamode(struct ata_port *ap, struct ata_device *adev) | |
202 | { | |
203 | timing_setup(ap, adev, 0x40, adev->dma_mode, 1); | |
204 | } | |
205 | ||
206 | static void amd66_set_dmamode(struct ata_port *ap, struct ata_device *adev) | |
207 | { | |
208 | timing_setup(ap, adev, 0x40, adev->dma_mode, 2); | |
209 | } | |
210 | ||
211 | static void amd100_set_dmamode(struct ata_port *ap, struct ata_device *adev) | |
212 | { | |
213 | timing_setup(ap, adev, 0x40, adev->dma_mode, 3); | |
214 | } | |
215 | ||
216 | static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev) | |
217 | { | |
218 | timing_setup(ap, adev, 0x40, adev->dma_mode, 4); | |
219 | } | |
220 | ||
221 | ||
222 | /** | |
223 | * nv_probe_init - cable detection | |
224 | * @ap: ATA port | |
225 | * | |
226 | * Perform cable detection. The BIOS stores this in PCI config | |
227 | * space for us. | |
228 | */ | |
229 | ||
230 | static int nv_pre_reset(struct ata_port *ap) { | |
76ff3c6e AC |
231 | static const struct pci_bits nv_enable_bits[] = { |
232 | { 0x50, 1, 0x02, 0x02 }, | |
233 | { 0x50, 1, 0x01, 0x01 } | |
234 | }; | |
669a5db4 JG |
235 | |
236 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
669a5db4 | 237 | |
c961922b AC |
238 | if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no])) |
239 | return -ENOENT; | |
76ff3c6e | 240 | |
669a5db4 JG |
241 | return ata_std_prereset(ap); |
242 | } | |
243 | ||
244 | static void nv_error_handler(struct ata_port *ap) | |
245 | { | |
246 | ata_bmdma_drive_eh(ap, nv_pre_reset, | |
247 | ata_std_softreset, NULL, | |
248 | ata_std_postreset); | |
249 | } | |
eb4a2c7f AC |
250 | |
251 | static int nv_cable_detect(struct ata_port *ap) | |
252 | { | |
253 | static const u8 bitmask[2] = {0x03, 0x0C}; | |
254 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
255 | u8 ata66; | |
256 | u16 udma; | |
257 | int cbl; | |
258 | ||
259 | pci_read_config_byte(pdev, 0x52, &ata66); | |
260 | if (ata66 & bitmask[ap->port_no]) | |
261 | cbl = ATA_CBL_PATA80; | |
262 | else | |
263 | cbl = ATA_CBL_PATA40; | |
264 | ||
265 | /* We now have to double check because the Nvidia boxes BIOS | |
266 | doesn't always set the cable bits but does set mode bits */ | |
267 | pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma); | |
268 | if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400) | |
269 | cbl = ATA_CBL_PATA80; | |
270 | return cbl; | |
271 | } | |
272 | ||
669a5db4 JG |
273 | /** |
274 | * nv100_set_piomode - set initial PIO mode data | |
275 | * @ap: ATA interface | |
276 | * @adev: ATA device | |
277 | * | |
278 | * Program the AMD registers for PIO mode. | |
279 | */ | |
280 | ||
281 | static void nv100_set_piomode(struct ata_port *ap, struct ata_device *adev) | |
282 | { | |
283 | timing_setup(ap, adev, 0x50, adev->pio_mode, 3); | |
284 | } | |
285 | ||
286 | static void nv133_set_piomode(struct ata_port *ap, struct ata_device *adev) | |
287 | { | |
288 | timing_setup(ap, adev, 0x50, adev->pio_mode, 4); | |
289 | } | |
290 | ||
291 | /** | |
292 | * nv100_set_dmamode - set initial DMA mode data | |
293 | * @ap: ATA interface | |
294 | * @adev: ATA device | |
295 | * | |
296 | * Program the MWDMA/UDMA modes for the AMD and Nvidia | |
297 | * chipset. | |
298 | */ | |
299 | ||
300 | static void nv100_set_dmamode(struct ata_port *ap, struct ata_device *adev) | |
301 | { | |
302 | timing_setup(ap, adev, 0x50, adev->dma_mode, 3); | |
303 | } | |
304 | ||
305 | static void nv133_set_dmamode(struct ata_port *ap, struct ata_device *adev) | |
306 | { | |
307 | timing_setup(ap, adev, 0x50, adev->dma_mode, 4); | |
308 | } | |
309 | ||
310 | static struct scsi_host_template amd_sht = { | |
311 | .module = THIS_MODULE, | |
312 | .name = DRV_NAME, | |
313 | .ioctl = ata_scsi_ioctl, | |
314 | .queuecommand = ata_scsi_queuecmd, | |
315 | .can_queue = ATA_DEF_QUEUE, | |
316 | .this_id = ATA_SHT_THIS_ID, | |
317 | .sg_tablesize = LIBATA_MAX_PRD, | |
669a5db4 JG |
318 | .cmd_per_lun = ATA_SHT_CMD_PER_LUN, |
319 | .emulated = ATA_SHT_EMULATED, | |
320 | .use_clustering = ATA_SHT_USE_CLUSTERING, | |
321 | .proc_name = DRV_NAME, | |
322 | .dma_boundary = ATA_DMA_BOUNDARY, | |
323 | .slave_configure = ata_scsi_slave_config, | |
afdfe899 | 324 | .slave_destroy = ata_scsi_slave_destroy, |
669a5db4 | 325 | .bios_param = ata_std_bios_param, |
438ac6d5 | 326 | #ifdef CONFIG_PM |
c304193a A |
327 | .resume = ata_scsi_device_resume, |
328 | .suspend = ata_scsi_device_suspend, | |
438ac6d5 | 329 | #endif |
669a5db4 JG |
330 | }; |
331 | ||
332 | static struct ata_port_operations amd33_port_ops = { | |
333 | .port_disable = ata_port_disable, | |
334 | .set_piomode = amd33_set_piomode, | |
335 | .set_dmamode = amd33_set_dmamode, | |
336 | .mode_filter = ata_pci_default_filter, | |
337 | .tf_load = ata_tf_load, | |
338 | .tf_read = ata_tf_read, | |
339 | .check_status = ata_check_status, | |
340 | .exec_command = ata_exec_command, | |
341 | .dev_select = ata_std_dev_select, | |
342 | ||
343 | .freeze = ata_bmdma_freeze, | |
344 | .thaw = ata_bmdma_thaw, | |
eb4a2c7f | 345 | .error_handler = amd_error_handler, |
669a5db4 | 346 | .post_internal_cmd = ata_bmdma_post_internal_cmd, |
eb4a2c7f | 347 | .cable_detect = ata_cable_40wire, |
669a5db4 JG |
348 | |
349 | .bmdma_setup = ata_bmdma_setup, | |
350 | .bmdma_start = ata_bmdma_start, | |
351 | .bmdma_stop = ata_bmdma_stop, | |
352 | .bmdma_status = ata_bmdma_status, | |
353 | ||
354 | .qc_prep = ata_qc_prep, | |
355 | .qc_issue = ata_qc_issue_prot, | |
bda30288 | 356 | |
0d5ff566 | 357 | .data_xfer = ata_data_xfer, |
669a5db4 JG |
358 | |
359 | .irq_handler = ata_interrupt, | |
360 | .irq_clear = ata_bmdma_irq_clear, | |
246ce3b6 AI |
361 | .irq_on = ata_irq_on, |
362 | .irq_ack = ata_irq_ack, | |
669a5db4 JG |
363 | |
364 | .port_start = ata_port_start, | |
669a5db4 JG |
365 | }; |
366 | ||
367 | static struct ata_port_operations amd66_port_ops = { | |
368 | .port_disable = ata_port_disable, | |
369 | .set_piomode = amd66_set_piomode, | |
370 | .set_dmamode = amd66_set_dmamode, | |
371 | .mode_filter = ata_pci_default_filter, | |
372 | .tf_load = ata_tf_load, | |
373 | .tf_read = ata_tf_read, | |
374 | .check_status = ata_check_status, | |
375 | .exec_command = ata_exec_command, | |
376 | .dev_select = ata_std_dev_select, | |
377 | ||
378 | .freeze = ata_bmdma_freeze, | |
379 | .thaw = ata_bmdma_thaw, | |
eb4a2c7f | 380 | .error_handler = amd_error_handler, |
669a5db4 | 381 | .post_internal_cmd = ata_bmdma_post_internal_cmd, |
eb4a2c7f | 382 | .cable_detect = ata_cable_unknown, |
669a5db4 JG |
383 | |
384 | .bmdma_setup = ata_bmdma_setup, | |
385 | .bmdma_start = ata_bmdma_start, | |
386 | .bmdma_stop = ata_bmdma_stop, | |
387 | .bmdma_status = ata_bmdma_status, | |
388 | ||
389 | .qc_prep = ata_qc_prep, | |
390 | .qc_issue = ata_qc_issue_prot, | |
bda30288 | 391 | |
0d5ff566 | 392 | .data_xfer = ata_data_xfer, |
669a5db4 JG |
393 | |
394 | .irq_handler = ata_interrupt, | |
395 | .irq_clear = ata_bmdma_irq_clear, | |
246ce3b6 AI |
396 | .irq_on = ata_irq_on, |
397 | .irq_ack = ata_irq_ack, | |
669a5db4 JG |
398 | |
399 | .port_start = ata_port_start, | |
669a5db4 JG |
400 | }; |
401 | ||
402 | static struct ata_port_operations amd100_port_ops = { | |
403 | .port_disable = ata_port_disable, | |
404 | .set_piomode = amd100_set_piomode, | |
405 | .set_dmamode = amd100_set_dmamode, | |
406 | .mode_filter = ata_pci_default_filter, | |
407 | .tf_load = ata_tf_load, | |
408 | .tf_read = ata_tf_read, | |
409 | .check_status = ata_check_status, | |
410 | .exec_command = ata_exec_command, | |
411 | .dev_select = ata_std_dev_select, | |
412 | ||
413 | .freeze = ata_bmdma_freeze, | |
414 | .thaw = ata_bmdma_thaw, | |
415 | .error_handler = amd_error_handler, | |
416 | .post_internal_cmd = ata_bmdma_post_internal_cmd, | |
eb4a2c7f | 417 | .cable_detect = ata_cable_unknown, |
669a5db4 JG |
418 | |
419 | .bmdma_setup = ata_bmdma_setup, | |
420 | .bmdma_start = ata_bmdma_start, | |
421 | .bmdma_stop = ata_bmdma_stop, | |
422 | .bmdma_status = ata_bmdma_status, | |
423 | ||
424 | .qc_prep = ata_qc_prep, | |
425 | .qc_issue = ata_qc_issue_prot, | |
bda30288 | 426 | |
0d5ff566 | 427 | .data_xfer = ata_data_xfer, |
669a5db4 JG |
428 | |
429 | .irq_handler = ata_interrupt, | |
430 | .irq_clear = ata_bmdma_irq_clear, | |
246ce3b6 AI |
431 | .irq_on = ata_irq_on, |
432 | .irq_ack = ata_irq_ack, | |
669a5db4 JG |
433 | |
434 | .port_start = ata_port_start, | |
669a5db4 JG |
435 | }; |
436 | ||
437 | static struct ata_port_operations amd133_port_ops = { | |
438 | .port_disable = ata_port_disable, | |
439 | .set_piomode = amd133_set_piomode, | |
440 | .set_dmamode = amd133_set_dmamode, | |
441 | .mode_filter = ata_pci_default_filter, | |
442 | .tf_load = ata_tf_load, | |
443 | .tf_read = ata_tf_read, | |
444 | .check_status = ata_check_status, | |
445 | .exec_command = ata_exec_command, | |
446 | .dev_select = ata_std_dev_select, | |
447 | ||
448 | .freeze = ata_bmdma_freeze, | |
449 | .thaw = ata_bmdma_thaw, | |
450 | .error_handler = amd_error_handler, | |
451 | .post_internal_cmd = ata_bmdma_post_internal_cmd, | |
eb4a2c7f | 452 | .cable_detect = amd_cable_detect, |
669a5db4 JG |
453 | |
454 | .bmdma_setup = ata_bmdma_setup, | |
455 | .bmdma_start = ata_bmdma_start, | |
456 | .bmdma_stop = ata_bmdma_stop, | |
457 | .bmdma_status = ata_bmdma_status, | |
458 | ||
459 | .qc_prep = ata_qc_prep, | |
460 | .qc_issue = ata_qc_issue_prot, | |
bda30288 | 461 | |
0d5ff566 | 462 | .data_xfer = ata_data_xfer, |
669a5db4 JG |
463 | |
464 | .irq_handler = ata_interrupt, | |
465 | .irq_clear = ata_bmdma_irq_clear, | |
246ce3b6 AI |
466 | .irq_on = ata_irq_on, |
467 | .irq_ack = ata_irq_ack, | |
669a5db4 JG |
468 | |
469 | .port_start = ata_port_start, | |
669a5db4 JG |
470 | }; |
471 | ||
472 | static struct ata_port_operations nv100_port_ops = { | |
473 | .port_disable = ata_port_disable, | |
474 | .set_piomode = nv100_set_piomode, | |
475 | .set_dmamode = nv100_set_dmamode, | |
476 | .mode_filter = ata_pci_default_filter, | |
477 | .tf_load = ata_tf_load, | |
478 | .tf_read = ata_tf_read, | |
479 | .check_status = ata_check_status, | |
480 | .exec_command = ata_exec_command, | |
481 | .dev_select = ata_std_dev_select, | |
482 | ||
483 | .freeze = ata_bmdma_freeze, | |
484 | .thaw = ata_bmdma_thaw, | |
485 | .error_handler = nv_error_handler, | |
486 | .post_internal_cmd = ata_bmdma_post_internal_cmd, | |
eb4a2c7f | 487 | .cable_detect = nv_cable_detect, |
669a5db4 JG |
488 | |
489 | .bmdma_setup = ata_bmdma_setup, | |
490 | .bmdma_start = ata_bmdma_start, | |
491 | .bmdma_stop = ata_bmdma_stop, | |
492 | .bmdma_status = ata_bmdma_status, | |
493 | ||
494 | .qc_prep = ata_qc_prep, | |
495 | .qc_issue = ata_qc_issue_prot, | |
bda30288 | 496 | |
0d5ff566 | 497 | .data_xfer = ata_data_xfer, |
669a5db4 JG |
498 | |
499 | .irq_handler = ata_interrupt, | |
500 | .irq_clear = ata_bmdma_irq_clear, | |
246ce3b6 AI |
501 | .irq_on = ata_irq_on, |
502 | .irq_ack = ata_irq_ack, | |
669a5db4 JG |
503 | |
504 | .port_start = ata_port_start, | |
669a5db4 JG |
505 | }; |
506 | ||
507 | static struct ata_port_operations nv133_port_ops = { | |
508 | .port_disable = ata_port_disable, | |
509 | .set_piomode = nv133_set_piomode, | |
510 | .set_dmamode = nv133_set_dmamode, | |
511 | .mode_filter = ata_pci_default_filter, | |
512 | .tf_load = ata_tf_load, | |
513 | .tf_read = ata_tf_read, | |
514 | .check_status = ata_check_status, | |
515 | .exec_command = ata_exec_command, | |
516 | .dev_select = ata_std_dev_select, | |
517 | ||
518 | .freeze = ata_bmdma_freeze, | |
519 | .thaw = ata_bmdma_thaw, | |
520 | .error_handler = nv_error_handler, | |
521 | .post_internal_cmd = ata_bmdma_post_internal_cmd, | |
eb4a2c7f | 522 | .cable_detect = nv_cable_detect, |
669a5db4 JG |
523 | |
524 | .bmdma_setup = ata_bmdma_setup, | |
525 | .bmdma_start = ata_bmdma_start, | |
526 | .bmdma_stop = ata_bmdma_stop, | |
527 | .bmdma_status = ata_bmdma_status, | |
528 | ||
529 | .qc_prep = ata_qc_prep, | |
530 | .qc_issue = ata_qc_issue_prot, | |
bda30288 | 531 | |
0d5ff566 | 532 | .data_xfer = ata_data_xfer, |
669a5db4 JG |
533 | |
534 | .irq_handler = ata_interrupt, | |
535 | .irq_clear = ata_bmdma_irq_clear, | |
246ce3b6 AI |
536 | .irq_on = ata_irq_on, |
537 | .irq_ack = ata_irq_ack, | |
669a5db4 JG |
538 | |
539 | .port_start = ata_port_start, | |
669a5db4 JG |
540 | }; |
541 | ||
542 | static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) | |
543 | { | |
544 | static struct ata_port_info info[10] = { | |
545 | { /* 0: AMD 7401 */ | |
546 | .sht = &amd_sht, | |
547 | .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, | |
548 | .pio_mask = 0x1f, | |
549 | .mwdma_mask = 0x07, /* No SWDMA */ | |
550 | .udma_mask = 0x07, /* UDMA 33 */ | |
551 | .port_ops = &amd33_port_ops | |
552 | }, | |
553 | { /* 1: Early AMD7409 - no swdma */ | |
554 | .sht = &amd_sht, | |
555 | .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, | |
556 | .pio_mask = 0x1f, | |
557 | .mwdma_mask = 0x07, | |
558 | .udma_mask = 0x1f, /* UDMA 66 */ | |
559 | .port_ops = &amd66_port_ops | |
560 | }, | |
561 | { /* 2: AMD 7409, no swdma errata */ | |
562 | .sht = &amd_sht, | |
563 | .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, | |
564 | .pio_mask = 0x1f, | |
565 | .mwdma_mask = 0x07, | |
566 | .udma_mask = 0x1f, /* UDMA 66 */ | |
567 | .port_ops = &amd66_port_ops | |
568 | }, | |
569 | { /* 3: AMD 7411 */ | |
570 | .sht = &amd_sht, | |
571 | .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, | |
572 | .pio_mask = 0x1f, | |
573 | .mwdma_mask = 0x07, | |
574 | .udma_mask = 0x3f, /* UDMA 100 */ | |
575 | .port_ops = &amd100_port_ops | |
576 | }, | |
577 | { /* 4: AMD 7441 */ | |
578 | .sht = &amd_sht, | |
579 | .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, | |
580 | .pio_mask = 0x1f, | |
581 | .mwdma_mask = 0x07, | |
582 | .udma_mask = 0x3f, /* UDMA 100 */ | |
583 | .port_ops = &amd100_port_ops | |
584 | }, | |
585 | { /* 5: AMD 8111*/ | |
586 | .sht = &amd_sht, | |
587 | .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, | |
588 | .pio_mask = 0x1f, | |
589 | .mwdma_mask = 0x07, | |
590 | .udma_mask = 0x7f, /* UDMA 133, no swdma */ | |
591 | .port_ops = &amd133_port_ops | |
592 | }, | |
593 | { /* 6: AMD 8111 UDMA 100 (Serenade) */ | |
594 | .sht = &amd_sht, | |
595 | .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, | |
596 | .pio_mask = 0x1f, | |
597 | .mwdma_mask = 0x07, | |
598 | .udma_mask = 0x3f, /* UDMA 100, no swdma */ | |
599 | .port_ops = &amd133_port_ops | |
600 | }, | |
601 | { /* 7: Nvidia Nforce */ | |
602 | .sht = &amd_sht, | |
603 | .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, | |
604 | .pio_mask = 0x1f, | |
605 | .mwdma_mask = 0x07, | |
606 | .udma_mask = 0x3f, /* UDMA 100 */ | |
607 | .port_ops = &nv100_port_ops | |
608 | }, | |
609 | { /* 8: Nvidia Nforce2 and later */ | |
610 | .sht = &amd_sht, | |
611 | .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, | |
612 | .pio_mask = 0x1f, | |
613 | .mwdma_mask = 0x07, | |
614 | .udma_mask = 0x7f, /* UDMA 133, no swdma */ | |
615 | .port_ops = &nv133_port_ops | |
616 | }, | |
617 | { /* 9: AMD CS5536 (Geode companion) */ | |
618 | .sht = &amd_sht, | |
619 | .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, | |
620 | .pio_mask = 0x1f, | |
621 | .mwdma_mask = 0x07, | |
622 | .udma_mask = 0x3f, /* UDMA 100 */ | |
623 | .port_ops = &amd100_port_ops | |
624 | } | |
625 | }; | |
626 | static struct ata_port_info *port_info[2]; | |
627 | static int printed_version; | |
628 | int type = id->driver_data; | |
629 | u8 rev; | |
630 | u8 fifo; | |
631 | ||
632 | if (!printed_version++) | |
633 | dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); | |
634 | ||
635 | pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); | |
636 | pci_read_config_byte(pdev, 0x41, &fifo); | |
637 | ||
638 | /* Check for AMD7409 without swdma errata and if found adjust type */ | |
639 | if (type == 1 && rev > 0x7) | |
640 | type = 2; | |
641 | ||
642 | /* Check for AMD7411 */ | |
643 | if (type == 3) | |
644 | /* FIFO is broken */ | |
645 | pci_write_config_byte(pdev, 0x41, fifo & 0x0F); | |
646 | else | |
647 | pci_write_config_byte(pdev, 0x41, fifo | 0xF0); | |
648 | ||
649 | /* Serenade ? */ | |
650 | if (type == 5 && pdev->subsystem_vendor == PCI_VENDOR_ID_AMD && | |
651 | pdev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE) | |
652 | type = 6; /* UDMA 100 only */ | |
653 | ||
654 | if (type < 3) | |
655 | ata_pci_clear_simplex(pdev); | |
656 | ||
657 | /* And fire it up */ | |
658 | ||
659 | port_info[0] = port_info[1] = &info[type]; | |
660 | return ata_pci_init_one(pdev, port_info, 2); | |
661 | } | |
662 | ||
438ac6d5 | 663 | #ifdef CONFIG_PM |
c304193a A |
664 | static int amd_reinit_one(struct pci_dev *pdev) |
665 | { | |
666 | if (pdev->vendor == PCI_VENDOR_ID_AMD) { | |
667 | u8 fifo; | |
668 | pci_read_config_byte(pdev, 0x41, &fifo); | |
669 | if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411) | |
670 | /* FIFO is broken */ | |
671 | pci_write_config_byte(pdev, 0x41, fifo & 0x0F); | |
672 | else | |
673 | pci_write_config_byte(pdev, 0x41, fifo | 0xF0); | |
674 | if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 || | |
675 | pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401) | |
676 | ata_pci_clear_simplex(pdev); | |
677 | } | |
678 | return ata_pci_device_resume(pdev); | |
679 | } | |
438ac6d5 | 680 | #endif |
c304193a | 681 | |
669a5db4 | 682 | static const struct pci_device_id amd[] = { |
2d2744fc JG |
683 | { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_COBRA_7401), 0 }, |
684 | { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7409), 1 }, | |
685 | { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7411), 3 }, | |
686 | { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_OPUS_7441), 4 }, | |
687 | { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_8111_IDE), 5 }, | |
688 | { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE), 7 }, | |
689 | { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE), 8 }, | |
690 | { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE), 8 }, | |
691 | { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE), 8 }, | |
692 | { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE), 8 }, | |
693 | { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE), 8 }, | |
694 | { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE), 8 }, | |
695 | { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE), 8 }, | |
696 | { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE), 8 }, | |
697 | { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE), 8 }, | |
05e2867a PC |
698 | { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE), 8 }, |
699 | { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE), 8 }, | |
2d2744fc JG |
700 | { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), 9 }, |
701 | ||
702 | { }, | |
669a5db4 JG |
703 | }; |
704 | ||
705 | static struct pci_driver amd_pci_driver = { | |
2d2744fc | 706 | .name = DRV_NAME, |
669a5db4 JG |
707 | .id_table = amd, |
708 | .probe = amd_init_one, | |
c304193a | 709 | .remove = ata_pci_remove_one, |
438ac6d5 | 710 | #ifdef CONFIG_PM |
c304193a A |
711 | .suspend = ata_pci_device_suspend, |
712 | .resume = amd_reinit_one, | |
438ac6d5 | 713 | #endif |
669a5db4 JG |
714 | }; |
715 | ||
716 | static int __init amd_init(void) | |
717 | { | |
718 | return pci_register_driver(&amd_pci_driver); | |
719 | } | |
720 | ||
721 | static void __exit amd_exit(void) | |
722 | { | |
723 | pci_unregister_driver(&amd_pci_driver); | |
724 | } | |
725 | ||
669a5db4 JG |
726 | MODULE_AUTHOR("Alan Cox"); |
727 | MODULE_DESCRIPTION("low-level driver for AMD PATA IDE"); | |
728 | MODULE_LICENSE("GPL"); | |
729 | MODULE_DEVICE_TABLE(pci, amd); | |
730 | MODULE_VERSION(DRV_VERSION); | |
731 | ||
732 | module_init(amd_init); | |
733 | module_exit(amd_exit); |