Commit | Line | Data |
---|---|---|
669a5db4 JG |
1 | /* |
2 | * Promise PATA TX2/TX4/TX2000/133 IDE driver for pdc20268 to pdc20277. | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or | |
5 | * modify it under the terms of the GNU General Public License | |
6 | * as published by the Free Software Foundation; either version | |
7 | * 2 of the License, or (at your option) any later version. | |
8 | * | |
9 | * Ported to libata by: | |
10 | * Albert Lee <albertcc@tw.ibm.com> IBM Corporation | |
11 | * | |
12 | * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org> | |
13 | * Portions Copyright (C) 1999 Promise Technology, Inc. | |
14 | * | |
15 | * Author: Frank Tiernan (frankt@promise.com) | |
16 | * Released under terms of General Public License | |
17 | * | |
18 | * | |
19 | * libata documentation is available via 'make {ps|pdf}docs', | |
20 | * as Documentation/DocBook/libata.* | |
21 | * | |
22 | * Hardware information only available under NDA. | |
23 | * | |
24 | */ | |
25 | #include <linux/kernel.h> | |
26 | #include <linux/module.h> | |
27 | #include <linux/pci.h> | |
28 | #include <linux/init.h> | |
29 | #include <linux/blkdev.h> | |
30 | #include <linux/delay.h> | |
31 | #include <linux/device.h> | |
32 | #include <scsi/scsi.h> | |
33 | #include <scsi/scsi_host.h> | |
34 | #include <scsi/scsi_cmnd.h> | |
35 | #include <linux/libata.h> | |
669a5db4 JG |
36 | |
37 | #define DRV_NAME "pata_pdc2027x" | |
2a3103ce | 38 | #define DRV_VERSION "1.0" |
669a5db4 JG |
39 | #undef PDC_DEBUG |
40 | ||
41 | #ifdef PDC_DEBUG | |
7f5e4e8d | 42 | #define PDPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) |
669a5db4 JG |
43 | #else |
44 | #define PDPRINTK(fmt, args...) | |
45 | #endif | |
46 | ||
47 | enum { | |
0d5ff566 TH |
48 | PDC_MMIO_BAR = 5, |
49 | ||
669a5db4 JG |
50 | PDC_UDMA_100 = 0, |
51 | PDC_UDMA_133 = 1, | |
52 | ||
53 | PDC_100_MHZ = 100000000, | |
54 | PDC_133_MHZ = 133333333, | |
55 | ||
56 | PDC_SYS_CTL = 0x1100, | |
57 | PDC_ATA_CTL = 0x1104, | |
58 | PDC_GLOBAL_CTL = 0x1108, | |
59 | PDC_CTCR0 = 0x110C, | |
60 | PDC_CTCR1 = 0x1110, | |
61 | PDC_BYTE_COUNT = 0x1120, | |
62 | PDC_PLL_CTL = 0x1202, | |
63 | }; | |
64 | ||
65 | static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); | |
59affa50 | 66 | #ifdef CONFIG_PM |
adacaf14 | 67 | static int pdc2027x_reinit_one(struct pci_dev *pdev); |
59affa50 | 68 | #endif |
a1efdaba | 69 | static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline); |
669a5db4 JG |
70 | static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev); |
71 | static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev); | |
669a5db4 | 72 | static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc); |
9bedb799 AC |
73 | static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask); |
74 | static int pdc2027x_cable_detect(struct ata_port *ap); | |
0260731f | 75 | static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed); |
669a5db4 JG |
76 | |
77 | /* | |
78 | * ATA Timing Tables based on 133MHz controller clock. | |
79 | * These tables are only used when the controller is in 133MHz clock. | |
80 | * If the controller is in 100MHz clock, the ASIC hardware will | |
81 | * set the timing registers automatically when "set feature" command | |
82 | * is issued to the device. However, if the controller clock is 133MHz, | |
83 | * the following tables must be used. | |
84 | */ | |
85 | static struct pdc2027x_pio_timing { | |
86 | u8 value0, value1, value2; | |
87 | } pdc2027x_pio_timing_tbl [] = { | |
88 | { 0xfb, 0x2b, 0xac }, /* PIO mode 0 */ | |
89 | { 0x46, 0x29, 0xa4 }, /* PIO mode 1 */ | |
90 | { 0x23, 0x26, 0x64 }, /* PIO mode 2 */ | |
91 | { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */ | |
92 | { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */ | |
93 | }; | |
94 | ||
95 | static struct pdc2027x_mdma_timing { | |
96 | u8 value0, value1; | |
97 | } pdc2027x_mdma_timing_tbl [] = { | |
98 | { 0xdf, 0x5f }, /* MDMA mode 0 */ | |
99 | { 0x6b, 0x27 }, /* MDMA mode 1 */ | |
100 | { 0x69, 0x25 }, /* MDMA mode 2 */ | |
101 | }; | |
102 | ||
103 | static struct pdc2027x_udma_timing { | |
104 | u8 value0, value1, value2; | |
105 | } pdc2027x_udma_timing_tbl [] = { | |
106 | { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */ | |
107 | { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */ | |
108 | { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */ | |
109 | { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */ | |
110 | { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */ | |
111 | { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */ | |
112 | { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ | |
113 | }; | |
114 | ||
115 | static const struct pci_device_id pdc2027x_pci_tbl[] = { | |
2d2744fc JG |
116 | { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20268), PDC_UDMA_100 }, |
117 | { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20269), PDC_UDMA_133 }, | |
118 | { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20270), PDC_UDMA_100 }, | |
119 | { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20271), PDC_UDMA_133 }, | |
120 | { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20275), PDC_UDMA_133 }, | |
121 | { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20276), PDC_UDMA_133 }, | |
122 | { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20277), PDC_UDMA_133 }, | |
123 | ||
669a5db4 JG |
124 | { } /* terminate list */ |
125 | }; | |
126 | ||
127 | static struct pci_driver pdc2027x_pci_driver = { | |
128 | .name = DRV_NAME, | |
129 | .id_table = pdc2027x_pci_tbl, | |
130 | .probe = pdc2027x_init_one, | |
24dc5f33 | 131 | .remove = ata_pci_remove_one, |
adacaf14 BZ |
132 | #ifdef CONFIG_PM |
133 | .suspend = ata_pci_device_suspend, | |
134 | .resume = pdc2027x_reinit_one, | |
135 | #endif | |
669a5db4 JG |
136 | }; |
137 | ||
138 | static struct scsi_host_template pdc2027x_sht = { | |
68d1d07b | 139 | ATA_BMDMA_SHT(DRV_NAME), |
669a5db4 JG |
140 | }; |
141 | ||
142 | static struct ata_port_operations pdc2027x_pata100_ops = { | |
029cfd6b | 143 | .inherits = &ata_bmdma_port_ops, |
669a5db4 | 144 | .check_atapi_dma = pdc2027x_check_atapi_dma, |
9bedb799 | 145 | .cable_detect = pdc2027x_cable_detect, |
a1efdaba | 146 | .prereset = pdc2027x_prereset, |
669a5db4 JG |
147 | }; |
148 | ||
149 | static struct ata_port_operations pdc2027x_pata133_ops = { | |
029cfd6b TH |
150 | .inherits = &pdc2027x_pata100_ops, |
151 | .mode_filter = pdc2027x_mode_filter, | |
669a5db4 JG |
152 | .set_piomode = pdc2027x_set_piomode, |
153 | .set_dmamode = pdc2027x_set_dmamode, | |
9bedb799 | 154 | .set_mode = pdc2027x_set_mode, |
669a5db4 JG |
155 | }; |
156 | ||
157 | static struct ata_port_info pdc2027x_port_info[] = { | |
158 | /* PDC_UDMA_100 */ | |
159 | { | |
9cbe056f | 160 | .flags = ATA_FLAG_SLAVE_POSS, |
14bdef98 EIB |
161 | .pio_mask = ATA_PIO4, |
162 | .mwdma_mask = ATA_MWDMA2, | |
163 | .udma_mask = ATA_UDMA5, | |
669a5db4 JG |
164 | .port_ops = &pdc2027x_pata100_ops, |
165 | }, | |
166 | /* PDC_UDMA_133 */ | |
167 | { | |
9cbe056f | 168 | .flags = ATA_FLAG_SLAVE_POSS, |
14bdef98 EIB |
169 | .pio_mask = ATA_PIO4, |
170 | .mwdma_mask = ATA_MWDMA2, | |
171 | .udma_mask = ATA_UDMA6, | |
669a5db4 JG |
172 | .port_ops = &pdc2027x_pata133_ops, |
173 | }, | |
174 | }; | |
175 | ||
176 | MODULE_AUTHOR("Andre Hedrick, Frank Tiernan, Albert Lee"); | |
177 | MODULE_DESCRIPTION("libata driver module for Promise PDC20268 to PDC20277"); | |
178 | MODULE_LICENSE("GPL"); | |
179 | MODULE_VERSION(DRV_VERSION); | |
180 | MODULE_DEVICE_TABLE(pci, pdc2027x_pci_tbl); | |
181 | ||
182 | /** | |
183 | * port_mmio - Get the MMIO address of PDC2027x extended registers | |
184 | * @ap: Port | |
185 | * @offset: offset from mmio base | |
186 | */ | |
7c250413 | 187 | static inline void __iomem *port_mmio(struct ata_port *ap, unsigned int offset) |
669a5db4 | 188 | { |
0d5ff566 | 189 | return ap->host->iomap[PDC_MMIO_BAR] + ap->port_no * 0x100 + offset; |
669a5db4 JG |
190 | } |
191 | ||
192 | /** | |
193 | * dev_mmio - Get the MMIO address of PDC2027x extended registers | |
194 | * @ap: Port | |
195 | * @adev: device | |
196 | * @offset: offset from mmio base | |
197 | */ | |
7c250413 | 198 | static inline void __iomem *dev_mmio(struct ata_port *ap, struct ata_device *adev, unsigned int offset) |
669a5db4 JG |
199 | { |
200 | u8 adj = (adev->devno) ? 0x08 : 0x00; | |
201 | return port_mmio(ap, offset) + adj; | |
202 | } | |
203 | ||
204 | /** | |
9bedb799 | 205 | * pdc2027x_pata_cable_detect - Probe host controller cable detect info |
669a5db4 JG |
206 | * @ap: Port for which cable detect info is desired |
207 | * | |
208 | * Read 80c cable indicator from Promise extended register. | |
209 | * This register is latched when the system is reset. | |
210 | * | |
211 | * LOCKING: | |
212 | * None (inherited from caller). | |
213 | */ | |
9bedb799 | 214 | static int pdc2027x_cable_detect(struct ata_port *ap) |
669a5db4 JG |
215 | { |
216 | u32 cgcr; | |
217 | ||
218 | /* check cable detect results */ | |
d2a84f47 | 219 | cgcr = ioread32(port_mmio(ap, PDC_GLOBAL_CTL)); |
669a5db4 JG |
220 | if (cgcr & (1 << 26)) |
221 | goto cbl40; | |
222 | ||
223 | PDPRINTK("No cable or 80-conductor cable on port %d\n", ap->port_no); | |
224 | ||
9bedb799 | 225 | return ATA_CBL_PATA80; |
669a5db4 JG |
226 | cbl40: |
227 | printk(KERN_INFO DRV_NAME ": 40-conductor cable detected on port %d\n", ap->port_no); | |
9bedb799 | 228 | return ATA_CBL_PATA40; |
669a5db4 JG |
229 | } |
230 | ||
231 | /** | |
232 | * pdc2027x_port_enabled - Check PDC ATA control register to see whether the port is enabled. | |
233 | * @ap: Port to check | |
234 | */ | |
235 | static inline int pdc2027x_port_enabled(struct ata_port *ap) | |
236 | { | |
d2a84f47 | 237 | return ioread8(port_mmio(ap, PDC_ATA_CTL)) & 0x02; |
669a5db4 JG |
238 | } |
239 | ||
240 | /** | |
241 | * pdc2027x_prereset - prereset for PATA host controller | |
cc0680a5 | 242 | * @link: Target link |
d4b2bab4 | 243 | * @deadline: deadline jiffies for the operation |
669a5db4 JG |
244 | * |
245 | * Probeinit including cable detection. | |
246 | * | |
247 | * LOCKING: | |
248 | * None (inherited from caller). | |
249 | */ | |
250 | ||
cc0680a5 | 251 | static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline) |
669a5db4 JG |
252 | { |
253 | /* Check whether port enabled */ | |
cc0680a5 | 254 | if (!pdc2027x_port_enabled(link->ap)) |
c961922b | 255 | return -ENOENT; |
9363c382 | 256 | return ata_sff_prereset(link, deadline); |
669a5db4 JG |
257 | } |
258 | ||
9bedb799 AC |
259 | /** |
260 | * pdc2720x_mode_filter - mode selection filter | |
261 | * @adev: ATA device | |
262 | * @mask: list of modes proposed | |
263 | * | |
264 | * Block UDMA on devices that cause trouble with this controller. | |
265 | */ | |
266 | ||
267 | static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask) | |
268 | { | |
269 | unsigned char model_num[ATA_ID_PROD_LEN + 1]; | |
270 | struct ata_device *pair = ata_dev_pair(adev); | |
271 | ||
272 | if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL) | |
c7087652 | 273 | return mask; |
9bedb799 AC |
274 | |
275 | /* Check for slave of a Maxtor at UDMA6 */ | |
276 | ata_id_c_string(pair->id, model_num, ATA_ID_PROD, | |
277 | ATA_ID_PROD_LEN + 1); | |
278 | /* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */ | |
4ca4e439 | 279 | if (strstr(model_num, "Maxtor") == NULL && pair->dma_mode == XFER_UDMA_6) |
9bedb799 AC |
280 | mask &= ~ (1 << (6 + ATA_SHIFT_UDMA)); |
281 | ||
c7087652 | 282 | return mask; |
9bedb799 AC |
283 | } |
284 | ||
669a5db4 JG |
285 | /** |
286 | * pdc2027x_set_piomode - Initialize host controller PATA PIO timings | |
287 | * @ap: Port to configure | |
288 | * @adev: um | |
669a5db4 JG |
289 | * |
290 | * Set PIO mode for device. | |
291 | * | |
292 | * LOCKING: | |
293 | * None (inherited from caller). | |
294 | */ | |
295 | ||
296 | static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev) | |
297 | { | |
298 | unsigned int pio = adev->pio_mode - XFER_PIO_0; | |
299 | u32 ctcr0, ctcr1; | |
300 | ||
301 | PDPRINTK("adev->pio_mode[%X]\n", adev->pio_mode); | |
302 | ||
303 | /* Sanity check */ | |
304 | if (pio > 4) { | |
305 | printk(KERN_ERR DRV_NAME ": Unknown pio mode [%d] ignored\n", pio); | |
306 | return; | |
307 | ||
308 | } | |
309 | ||
310 | /* Set the PIO timing registers using value table for 133MHz */ | |
311 | PDPRINTK("Set pio regs... \n"); | |
312 | ||
d2a84f47 | 313 | ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0)); |
669a5db4 JG |
314 | ctcr0 &= 0xffff0000; |
315 | ctcr0 |= pdc2027x_pio_timing_tbl[pio].value0 | | |
316 | (pdc2027x_pio_timing_tbl[pio].value1 << 8); | |
d2a84f47 | 317 | iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0)); |
669a5db4 | 318 | |
d2a84f47 | 319 | ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1)); |
669a5db4 JG |
320 | ctcr1 &= 0x00ffffff; |
321 | ctcr1 |= (pdc2027x_pio_timing_tbl[pio].value2 << 24); | |
d2a84f47 | 322 | iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1)); |
669a5db4 JG |
323 | |
324 | PDPRINTK("Set pio regs done\n"); | |
325 | ||
326 | PDPRINTK("Set to pio mode[%u] \n", pio); | |
327 | } | |
328 | ||
329 | /** | |
330 | * pdc2027x_set_dmamode - Initialize host controller PATA UDMA timings | |
331 | * @ap: Port to configure | |
332 | * @adev: um | |
669a5db4 JG |
333 | * |
334 | * Set UDMA mode for device. | |
335 | * | |
336 | * LOCKING: | |
337 | * None (inherited from caller). | |
338 | */ | |
339 | static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev) | |
340 | { | |
341 | unsigned int dma_mode = adev->dma_mode; | |
342 | u32 ctcr0, ctcr1; | |
343 | ||
344 | if ((dma_mode >= XFER_UDMA_0) && | |
345 | (dma_mode <= XFER_UDMA_6)) { | |
346 | /* Set the UDMA timing registers with value table for 133MHz */ | |
347 | unsigned int udma_mode = dma_mode & 0x07; | |
348 | ||
349 | if (dma_mode == XFER_UDMA_2) { | |
350 | /* | |
351 | * Turn off tHOLD. | |
352 | * If tHOLD is '1', the hardware will add half clock for data hold time. | |
353 | * This code segment seems to be no effect. tHOLD will be overwritten below. | |
354 | */ | |
d2a84f47 AC |
355 | ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1)); |
356 | iowrite32(ctcr1 & ~(1 << 7), dev_mmio(ap, adev, PDC_CTCR1)); | |
669a5db4 JG |
357 | } |
358 | ||
359 | PDPRINTK("Set udma regs... \n"); | |
360 | ||
d2a84f47 | 361 | ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1)); |
669a5db4 JG |
362 | ctcr1 &= 0xff000000; |
363 | ctcr1 |= pdc2027x_udma_timing_tbl[udma_mode].value0 | | |
364 | (pdc2027x_udma_timing_tbl[udma_mode].value1 << 8) | | |
365 | (pdc2027x_udma_timing_tbl[udma_mode].value2 << 16); | |
d2a84f47 | 366 | iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1)); |
669a5db4 JG |
367 | |
368 | PDPRINTK("Set udma regs done\n"); | |
369 | ||
370 | PDPRINTK("Set to udma mode[%u] \n", udma_mode); | |
371 | ||
372 | } else if ((dma_mode >= XFER_MW_DMA_0) && | |
373 | (dma_mode <= XFER_MW_DMA_2)) { | |
374 | /* Set the MDMA timing registers with value table for 133MHz */ | |
375 | unsigned int mdma_mode = dma_mode & 0x07; | |
376 | ||
377 | PDPRINTK("Set mdma regs... \n"); | |
d2a84f47 | 378 | ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0)); |
669a5db4 JG |
379 | |
380 | ctcr0 &= 0x0000ffff; | |
381 | ctcr0 |= (pdc2027x_mdma_timing_tbl[mdma_mode].value0 << 16) | | |
382 | (pdc2027x_mdma_timing_tbl[mdma_mode].value1 << 24); | |
383 | ||
d2a84f47 | 384 | iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0)); |
669a5db4 JG |
385 | PDPRINTK("Set mdma regs done\n"); |
386 | ||
387 | PDPRINTK("Set to mdma mode[%u] \n", mdma_mode); | |
388 | } else { | |
389 | printk(KERN_ERR DRV_NAME ": Unknown dma mode [%u] ignored\n", dma_mode); | |
390 | } | |
391 | } | |
392 | ||
393 | /** | |
9bedb799 | 394 | * pdc2027x_set_mode - Set the timing registers back to correct values. |
0260731f | 395 | * @link: link to configure |
9bedb799 | 396 | * @r_failed: Returned device for failure |
669a5db4 JG |
397 | * |
398 | * The pdc2027x hardware will look at "SET FEATURES" and change the timing registers | |
399 | * automatically. The values set by the hardware might be incorrect, under 133Mhz PLL. | |
400 | * This function overwrites the possibly incorrect values set by the hardware to be correct. | |
401 | */ | |
0260731f | 402 | static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed) |
669a5db4 | 403 | { |
0260731f | 404 | struct ata_port *ap = link->ap; |
f58229f8 TH |
405 | struct ata_device *dev; |
406 | int rc; | |
669a5db4 | 407 | |
0260731f | 408 | rc = ata_do_set_mode(link, r_failed); |
f58229f8 TH |
409 | if (rc < 0) |
410 | return rc; | |
669a5db4 | 411 | |
1eca4365 TH |
412 | ata_for_each_dev(dev, link, ENABLED) { |
413 | pdc2027x_set_piomode(ap, dev); | |
414 | ||
415 | /* | |
416 | * Enable prefetch if the device support PIO only. | |
417 | */ | |
418 | if (dev->xfer_shift == ATA_SHIFT_PIO) { | |
419 | u32 ctcr1 = ioread32(dev_mmio(ap, dev, PDC_CTCR1)); | |
420 | ctcr1 |= (1 << 25); | |
421 | iowrite32(ctcr1, dev_mmio(ap, dev, PDC_CTCR1)); | |
422 | ||
423 | PDPRINTK("Turn on prefetch\n"); | |
424 | } else { | |
425 | pdc2027x_set_dmamode(ap, dev); | |
669a5db4 JG |
426 | } |
427 | } | |
9bedb799 | 428 | return 0; |
669a5db4 JG |
429 | } |
430 | ||
431 | /** | |
432 | * pdc2027x_check_atapi_dma - Check whether ATAPI DMA can be supported for this command | |
433 | * @qc: Metadata associated with taskfile to check | |
434 | * | |
435 | * LOCKING: | |
436 | * None (inherited from caller). | |
437 | * | |
438 | * RETURNS: 0 when ATAPI DMA can be used | |
439 | * 1 otherwise | |
440 | */ | |
441 | static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc) | |
442 | { | |
443 | struct scsi_cmnd *cmd = qc->scsicmd; | |
444 | u8 *scsicmd = cmd->cmnd; | |
445 | int rc = 1; /* atapi dma off by default */ | |
446 | ||
447 | /* | |
448 | * This workaround is from Promise's GPL driver. | |
449 | * If ATAPI DMA is used for commands not in the | |
450 | * following white list, say MODE_SENSE and REQUEST_SENSE, | |
451 | * pdc2027x might hit the irq lost problem. | |
452 | */ | |
453 | switch (scsicmd[0]) { | |
454 | case READ_10: | |
455 | case WRITE_10: | |
456 | case READ_12: | |
457 | case WRITE_12: | |
458 | case READ_6: | |
459 | case WRITE_6: | |
460 | case 0xad: /* READ_DVD_STRUCTURE */ | |
461 | case 0xbe: /* READ_CD */ | |
462 | /* ATAPI DMA is ok */ | |
463 | rc = 0; | |
464 | break; | |
465 | default: | |
466 | ; | |
467 | } | |
468 | ||
469 | return rc; | |
470 | } | |
471 | ||
472 | /** | |
473 | * pdc_read_counter - Read the ctr counter | |
5d728824 | 474 | * @host: target ATA host |
669a5db4 JG |
475 | */ |
476 | ||
5d728824 | 477 | static long pdc_read_counter(struct ata_host *host) |
669a5db4 | 478 | { |
5d728824 | 479 | void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR]; |
669a5db4 JG |
480 | long counter; |
481 | int retry = 1; | |
482 | u32 bccrl, bccrh, bccrlv, bccrhv; | |
483 | ||
484 | retry: | |
d2a84f47 AC |
485 | bccrl = ioread32(mmio_base + PDC_BYTE_COUNT) & 0x7fff; |
486 | bccrh = ioread32(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff; | |
669a5db4 JG |
487 | |
488 | /* Read the counter values again for verification */ | |
d2a84f47 AC |
489 | bccrlv = ioread32(mmio_base + PDC_BYTE_COUNT) & 0x7fff; |
490 | bccrhv = ioread32(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff; | |
669a5db4 JG |
491 | |
492 | counter = (bccrh << 15) | bccrl; | |
493 | ||
494 | PDPRINTK("bccrh [%X] bccrl [%X]\n", bccrh, bccrl); | |
495 | PDPRINTK("bccrhv[%X] bccrlv[%X]\n", bccrhv, bccrlv); | |
496 | ||
497 | /* | |
498 | * The 30-bit decreasing counter are read by 2 pieces. | |
499 | * Incorrect value may be read when both bccrh and bccrl are changing. | |
500 | * Ex. When 7900 decrease to 78FF, wrong value 7800 might be read. | |
501 | */ | |
502 | if (retry && !(bccrh == bccrhv && bccrl >= bccrlv)) { | |
503 | retry--; | |
504 | PDPRINTK("rereading counter\n"); | |
505 | goto retry; | |
506 | } | |
507 | ||
508 | return counter; | |
509 | } | |
510 | ||
511 | /** | |
512 | * adjust_pll - Adjust the PLL input clock in Hz. | |
513 | * | |
514 | * @pdc_controller: controller specific information | |
5d728824 | 515 | * @host: target ATA host |
669a5db4 JG |
516 | * @pll_clock: The input of PLL in HZ |
517 | */ | |
5d728824 | 518 | static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int board_idx) |
669a5db4 | 519 | { |
5d728824 | 520 | void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR]; |
669a5db4 JG |
521 | u16 pll_ctl; |
522 | long pll_clock_khz = pll_clock / 1000; | |
523 | long pout_required = board_idx? PDC_133_MHZ:PDC_100_MHZ; | |
524 | long ratio = pout_required / pll_clock_khz; | |
525 | int F, R; | |
526 | ||
527 | /* Sanity check */ | |
528 | if (unlikely(pll_clock_khz < 5000L || pll_clock_khz > 70000L)) { | |
529 | printk(KERN_ERR DRV_NAME ": Invalid PLL input clock %ldkHz, give up!\n", pll_clock_khz); | |
530 | return; | |
531 | } | |
532 | ||
533 | #ifdef PDC_DEBUG | |
534 | PDPRINTK("pout_required is %ld\n", pout_required); | |
535 | ||
536 | /* Show the current clock value of PLL control register | |
537 | * (maybe already configured by the firmware) | |
538 | */ | |
d2a84f47 | 539 | pll_ctl = ioread16(mmio_base + PDC_PLL_CTL); |
669a5db4 JG |
540 | |
541 | PDPRINTK("pll_ctl[%X]\n", pll_ctl); | |
542 | #endif | |
543 | ||
544 | /* | |
545 | * Calculate the ratio of F, R and OD | |
546 | * POUT = (F + 2) / (( R + 2) * NO) | |
547 | */ | |
548 | if (ratio < 8600L) { /* 8.6x */ | |
549 | /* Using NO = 0x01, R = 0x0D */ | |
550 | R = 0x0d; | |
551 | } else if (ratio < 12900L) { /* 12.9x */ | |
552 | /* Using NO = 0x01, R = 0x08 */ | |
553 | R = 0x08; | |
554 | } else if (ratio < 16100L) { /* 16.1x */ | |
555 | /* Using NO = 0x01, R = 0x06 */ | |
556 | R = 0x06; | |
557 | } else if (ratio < 64000L) { /* 64x */ | |
558 | R = 0x00; | |
559 | } else { | |
560 | /* Invalid ratio */ | |
561 | printk(KERN_ERR DRV_NAME ": Invalid ratio %ld, give up!\n", ratio); | |
562 | return; | |
563 | } | |
564 | ||
565 | F = (ratio * (R+2)) / 1000 - 2; | |
566 | ||
567 | if (unlikely(F < 0 || F > 127)) { | |
568 | /* Invalid F */ | |
569 | printk(KERN_ERR DRV_NAME ": F[%d] invalid!\n", F); | |
570 | return; | |
571 | } | |
572 | ||
573 | PDPRINTK("F[%d] R[%d] ratio*1000[%ld]\n", F, R, ratio); | |
574 | ||
575 | pll_ctl = (R << 8) | F; | |
576 | ||
577 | PDPRINTK("Writing pll_ctl[%X]\n", pll_ctl); | |
578 | ||
d2a84f47 AC |
579 | iowrite16(pll_ctl, mmio_base + PDC_PLL_CTL); |
580 | ioread16(mmio_base + PDC_PLL_CTL); /* flush */ | |
669a5db4 JG |
581 | |
582 | /* Wait the PLL circuit to be stable */ | |
583 | mdelay(30); | |
584 | ||
585 | #ifdef PDC_DEBUG | |
586 | /* | |
587 | * Show the current clock value of PLL control register | |
588 | * (maybe configured by the firmware) | |
589 | */ | |
d2a84f47 | 590 | pll_ctl = ioread16(mmio_base + PDC_PLL_CTL); |
669a5db4 JG |
591 | |
592 | PDPRINTK("pll_ctl[%X]\n", pll_ctl); | |
593 | #endif | |
594 | ||
595 | return; | |
596 | } | |
597 | ||
598 | /** | |
599 | * detect_pll_input_clock - Detect the PLL input clock in Hz. | |
5d728824 | 600 | * @host: target ATA host |
669a5db4 JG |
601 | * Ex. 16949000 on 33MHz PCI bus for pdc20275. |
602 | * Half of the PCI clock. | |
603 | */ | |
5d728824 | 604 | static long pdc_detect_pll_input_clock(struct ata_host *host) |
669a5db4 | 605 | { |
5d728824 | 606 | void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR]; |
669a5db4 JG |
607 | u32 scr; |
608 | long start_count, end_count; | |
8c781bf7 AL |
609 | struct timeval start_time, end_time; |
610 | long pll_clock, usec_elapsed; | |
669a5db4 | 611 | |
669a5db4 | 612 | /* Start the test mode */ |
d2a84f47 | 613 | scr = ioread32(mmio_base + PDC_SYS_CTL); |
669a5db4 | 614 | PDPRINTK("scr[%X]\n", scr); |
d2a84f47 AC |
615 | iowrite32(scr | (0x01 << 14), mmio_base + PDC_SYS_CTL); |
616 | ioread32(mmio_base + PDC_SYS_CTL); /* flush */ | |
669a5db4 | 617 | |
78c4af0b MP |
618 | /* Read current counter value */ |
619 | start_count = pdc_read_counter(host); | |
620 | do_gettimeofday(&start_time); | |
621 | ||
669a5db4 JG |
622 | /* Let the counter run for 100 ms. */ |
623 | mdelay(100); | |
624 | ||
625 | /* Read the counter values again */ | |
5d728824 | 626 | end_count = pdc_read_counter(host); |
8c781bf7 | 627 | do_gettimeofday(&end_time); |
669a5db4 JG |
628 | |
629 | /* Stop the test mode */ | |
d2a84f47 | 630 | scr = ioread32(mmio_base + PDC_SYS_CTL); |
669a5db4 | 631 | PDPRINTK("scr[%X]\n", scr); |
d2a84f47 AC |
632 | iowrite32(scr & ~(0x01 << 14), mmio_base + PDC_SYS_CTL); |
633 | ioread32(mmio_base + PDC_SYS_CTL); /* flush */ | |
669a5db4 JG |
634 | |
635 | /* calculate the input clock in Hz */ | |
8c781bf7 AL |
636 | usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 + |
637 | (end_time.tv_usec - start_time.tv_usec); | |
638 | ||
78c4af0b | 639 | pll_clock = ((start_count - end_count) & 0x3fffffff) / 100 * |
8c781bf7 | 640 | (100000000 / usec_elapsed); |
669a5db4 JG |
641 | |
642 | PDPRINTK("start[%ld] end[%ld] \n", start_count, end_count); | |
643 | PDPRINTK("PLL input clock[%ld]Hz\n", pll_clock); | |
644 | ||
645 | return pll_clock; | |
646 | } | |
647 | ||
648 | /** | |
649 | * pdc_hardware_init - Initialize the hardware. | |
5d728824 TH |
650 | * @host: target ATA host |
651 | * @board_idx: board identifier | |
669a5db4 | 652 | */ |
5d728824 | 653 | static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx) |
669a5db4 JG |
654 | { |
655 | long pll_clock; | |
656 | ||
657 | /* | |
658 | * Detect PLL input clock rate. | |
659 | * On some system, where PCI bus is running at non-standard clock rate. | |
660 | * Ex. 25MHz or 40MHz, we have to adjust the cycle_time. | |
661 | * The pdc20275 controller employs PLL circuit to help correct timing registers setting. | |
662 | */ | |
5d728824 | 663 | pll_clock = pdc_detect_pll_input_clock(host); |
669a5db4 | 664 | |
a44fec1f | 665 | dev_info(host->dev, "PLL input clock %ld kHz\n", pll_clock/1000); |
669a5db4 JG |
666 | |
667 | /* Adjust PLL control register */ | |
5d728824 | 668 | pdc_adjust_pll(host, pll_clock, board_idx); |
669a5db4 JG |
669 | |
670 | return 0; | |
671 | } | |
672 | ||
673 | /** | |
674 | * pdc_ata_setup_port - setup the mmio address | |
675 | * @port: ata ioports to setup | |
676 | * @base: base address | |
677 | */ | |
0d5ff566 | 678 | static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base) |
669a5db4 JG |
679 | { |
680 | port->cmd_addr = | |
681 | port->data_addr = base; | |
682 | port->feature_addr = | |
683 | port->error_addr = base + 0x05; | |
684 | port->nsect_addr = base + 0x0a; | |
685 | port->lbal_addr = base + 0x0f; | |
686 | port->lbam_addr = base + 0x10; | |
687 | port->lbah_addr = base + 0x15; | |
688 | port->device_addr = base + 0x1a; | |
689 | port->command_addr = | |
690 | port->status_addr = base + 0x1f; | |
691 | port->altstatus_addr = | |
692 | port->ctl_addr = base + 0x81a; | |
693 | } | |
694 | ||
695 | /** | |
696 | * pdc2027x_init_one - PCI probe function | |
697 | * Called when an instance of PCI adapter is inserted. | |
698 | * This function checks whether the hardware is supported, | |
699 | * initialize hardware and register an instance of ata_host to | |
5d728824 | 700 | * libata. (implements struct pci_driver.probe() ) |
669a5db4 JG |
701 | * |
702 | * @pdev: instance of pci_dev found | |
703 | * @ent: matching entry in the id_tbl[] | |
704 | */ | |
0ec24914 GKH |
705 | static int pdc2027x_init_one(struct pci_dev *pdev, |
706 | const struct pci_device_id *ent) | |
669a5db4 | 707 | { |
cbcdd875 TH |
708 | static const unsigned long cmd_offset[] = { 0x17c0, 0x15c0 }; |
709 | static const unsigned long bmdma_offset[] = { 0x1000, 0x1008 }; | |
669a5db4 | 710 | unsigned int board_idx = (unsigned int) ent->driver_data; |
5d728824 TH |
711 | const struct ata_port_info *ppi[] = |
712 | { &pdc2027x_port_info[board_idx], NULL }; | |
713 | struct ata_host *host; | |
7c250413 | 714 | void __iomem *mmio_base; |
cbcdd875 | 715 | int i, rc; |
669a5db4 | 716 | |
06296a1e | 717 | ata_print_version_once(&pdev->dev, DRV_VERSION); |
669a5db4 | 718 | |
5d728824 TH |
719 | /* alloc host */ |
720 | host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2); | |
721 | if (!host) | |
722 | return -ENOMEM; | |
723 | ||
724 | /* acquire resources and fill host */ | |
24dc5f33 | 725 | rc = pcim_enable_device(pdev); |
669a5db4 JG |
726 | if (rc) |
727 | return rc; | |
728 | ||
0d5ff566 | 729 | rc = pcim_iomap_regions(pdev, 1 << PDC_MMIO_BAR, DRV_NAME); |
669a5db4 | 730 | if (rc) |
24dc5f33 | 731 | return rc; |
5d728824 | 732 | host->iomap = pcim_iomap_table(pdev); |
669a5db4 JG |
733 | |
734 | rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); | |
735 | if (rc) | |
24dc5f33 | 736 | return rc; |
669a5db4 JG |
737 | |
738 | rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); | |
739 | if (rc) | |
24dc5f33 | 740 | return rc; |
669a5db4 | 741 | |
5d728824 | 742 | mmio_base = host->iomap[PDC_MMIO_BAR]; |
669a5db4 | 743 | |
cbcdd875 TH |
744 | for (i = 0; i < 2; i++) { |
745 | struct ata_port *ap = host->ports[i]; | |
746 | ||
747 | pdc_ata_setup_port(&ap->ioaddr, mmio_base + cmd_offset[i]); | |
748 | ap->ioaddr.bmdma_addr = mmio_base + bmdma_offset[i]; | |
749 | ||
750 | ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio"); | |
751 | ata_port_pbar_desc(ap, PDC_MMIO_BAR, cmd_offset[i], "cmd"); | |
752 | } | |
0d5ff566 | 753 | |
669a5db4 JG |
754 | //pci_enable_intx(pdev); |
755 | ||
756 | /* initialize adapter */ | |
5d728824 | 757 | if (pdc_hardware_init(host, board_idx) != 0) |
24dc5f33 | 758 | return -EIO; |
669a5db4 | 759 | |
5d728824 | 760 | pci_set_master(pdev); |
c3b28894 | 761 | return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, |
9363c382 | 762 | IRQF_SHARED, &pdc2027x_sht); |
669a5db4 JG |
763 | } |
764 | ||
adacaf14 BZ |
765 | #ifdef CONFIG_PM |
766 | static int pdc2027x_reinit_one(struct pci_dev *pdev) | |
767 | { | |
768 | struct ata_host *host = dev_get_drvdata(&pdev->dev); | |
769 | unsigned int board_idx; | |
770 | int rc; | |
771 | ||
772 | rc = ata_pci_device_do_resume(pdev); | |
773 | if (rc) | |
774 | return rc; | |
775 | ||
776 | if (pdev->device == PCI_DEVICE_ID_PROMISE_20268 || | |
777 | pdev->device == PCI_DEVICE_ID_PROMISE_20270) | |
778 | board_idx = PDC_UDMA_100; | |
779 | else | |
780 | board_idx = PDC_UDMA_133; | |
781 | ||
782 | if (pdc_hardware_init(host, board_idx)) | |
783 | return -EIO; | |
784 | ||
785 | ata_host_resume(host); | |
786 | return 0; | |
787 | } | |
788 | #endif | |
789 | ||
2fc75da0 | 790 | module_pci_driver(pdc2027x_pci_driver); |