libata: kill dead code paths in reset path
[deliverable/linux.git] / drivers / ata / sata_fsl.c
CommitLineData
faf0b2e5
LY
1/*
2 * drivers/ata/sata_fsl.c
3 *
4 * Freescale 3.0Gbps SATA device driver
5 *
6 * Author: Ashish Kalra <ashish.kalra@freescale.com>
7 * Li Yang <leoli@freescale.com>
8 *
9 * Copyright (c) 2006-2007 Freescale Semiconductor, Inc.
10 *
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
15 *
16 */
17
18#include <linux/kernel.h>
19#include <linux/module.h>
20#include <linux/platform_device.h>
21
22#include <scsi/scsi_host.h>
23#include <scsi/scsi_cmnd.h>
24#include <linux/libata.h>
25#include <asm/io.h>
26#include <linux/of_platform.h>
27
28/* Controller information */
29enum {
30 SATA_FSL_QUEUE_DEPTH = 16,
31 SATA_FSL_MAX_PRD = 63,
32 SATA_FSL_MAX_PRD_USABLE = SATA_FSL_MAX_PRD - 1,
33 SATA_FSL_MAX_PRD_DIRECT = 16, /* Direct PRDT entries */
34
35 SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
36 ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
1bf617b7 37 ATA_FLAG_NCQ),
faf0b2e5
LY
38
39 SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH,
40 SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */
41 SATA_FSL_CMD_SLOT_SIZE = (SATA_FSL_MAX_CMDS * SATA_FSL_CMD_HDR_SIZE),
42
43 /*
44 * SATA-FSL host controller supports a max. of (15+1) direct PRDEs, and
45 * chained indirect PRDEs upto a max count of 63.
46 * We are allocating an array of 63 PRDEs contigiously, but PRDE#15 will
47 * be setup as an indirect descriptor, pointing to it's next
48 * (contigious) PRDE. Though chained indirect PRDE arrays are
49 * supported,it will be more efficient to use a direct PRDT and
50 * a single chain/link to indirect PRDE array/PRDT.
51 */
52
53 SATA_FSL_CMD_DESC_CFIS_SZ = 32,
54 SATA_FSL_CMD_DESC_SFIS_SZ = 32,
55 SATA_FSL_CMD_DESC_ACMD_SZ = 16,
56 SATA_FSL_CMD_DESC_RSRVD = 16,
57
58 SATA_FSL_CMD_DESC_SIZE = (SATA_FSL_CMD_DESC_CFIS_SZ +
59 SATA_FSL_CMD_DESC_SFIS_SZ +
60 SATA_FSL_CMD_DESC_ACMD_SZ +
61 SATA_FSL_CMD_DESC_RSRVD +
62 SATA_FSL_MAX_PRD * 16),
63
64 SATA_FSL_CMD_DESC_OFFSET_TO_PRDT =
65 (SATA_FSL_CMD_DESC_CFIS_SZ +
66 SATA_FSL_CMD_DESC_SFIS_SZ +
67 SATA_FSL_CMD_DESC_ACMD_SZ +
68 SATA_FSL_CMD_DESC_RSRVD),
69
70 SATA_FSL_CMD_DESC_AR_SZ = (SATA_FSL_CMD_DESC_SIZE * SATA_FSL_MAX_CMDS),
71 SATA_FSL_PORT_PRIV_DMA_SZ = (SATA_FSL_CMD_SLOT_SIZE +
72 SATA_FSL_CMD_DESC_AR_SZ),
73
74 /*
75 * MPC8315 has two SATA controllers, SATA1 & SATA2
76 * (one port per controller)
77 * MPC837x has 2/4 controllers, one port per controller
78 */
79
80 SATA_FSL_MAX_PORTS = 1,
81
82 SATA_FSL_IRQ_FLAG = IRQF_SHARED,
83};
84
85/*
86* Host Controller command register set - per port
87*/
88enum {
89 CQ = 0,
90 CA = 8,
91 CC = 0x10,
92 CE = 0x18,
93 DE = 0x20,
94 CHBA = 0x24,
95 HSTATUS = 0x28,
96 HCONTROL = 0x2C,
97 CQPMP = 0x30,
98 SIGNATURE = 0x34,
99 ICC = 0x38,
100
101 /*
102 * Host Status Register (HStatus) bitdefs
103 */
104 ONLINE = (1 << 31),
105 GOING_OFFLINE = (1 << 30),
106 BIST_ERR = (1 << 29),
107
108 FATAL_ERR_HC_MASTER_ERR = (1 << 18),
109 FATAL_ERR_PARITY_ERR_TX = (1 << 17),
110 FATAL_ERR_PARITY_ERR_RX = (1 << 16),
111 FATAL_ERR_DATA_UNDERRUN = (1 << 13),
112 FATAL_ERR_DATA_OVERRUN = (1 << 12),
113 FATAL_ERR_CRC_ERR_TX = (1 << 11),
114 FATAL_ERR_CRC_ERR_RX = (1 << 10),
115 FATAL_ERR_FIFO_OVRFL_TX = (1 << 9),
116 FATAL_ERR_FIFO_OVRFL_RX = (1 << 8),
117
118 FATAL_ERROR_DECODE = FATAL_ERR_HC_MASTER_ERR |
119 FATAL_ERR_PARITY_ERR_TX |
120 FATAL_ERR_PARITY_ERR_RX |
121 FATAL_ERR_DATA_UNDERRUN |
122 FATAL_ERR_DATA_OVERRUN |
123 FATAL_ERR_CRC_ERR_TX |
124 FATAL_ERR_CRC_ERR_RX |
125 FATAL_ERR_FIFO_OVRFL_TX | FATAL_ERR_FIFO_OVRFL_RX,
126
127 INT_ON_FATAL_ERR = (1 << 5),
128 INT_ON_PHYRDY_CHG = (1 << 4),
129
130 INT_ON_SIGNATURE_UPDATE = (1 << 3),
131 INT_ON_SNOTIFY_UPDATE = (1 << 2),
132 INT_ON_SINGL_DEVICE_ERR = (1 << 1),
133 INT_ON_CMD_COMPLETE = 1,
134
135 INT_ON_ERROR = INT_ON_FATAL_ERR |
136 INT_ON_PHYRDY_CHG | INT_ON_SINGL_DEVICE_ERR,
137
138 /*
139 * Host Control Register (HControl) bitdefs
140 */
141 HCONTROL_ONLINE_PHY_RST = (1 << 31),
142 HCONTROL_FORCE_OFFLINE = (1 << 30),
143 HCONTROL_PARITY_PROT_MOD = (1 << 14),
144 HCONTROL_DPATH_PARITY = (1 << 12),
145 HCONTROL_SNOOP_ENABLE = (1 << 10),
146 HCONTROL_PMP_ATTACHED = (1 << 9),
147 HCONTROL_COPYOUT_STATFIS = (1 << 8),
148 IE_ON_FATAL_ERR = (1 << 5),
149 IE_ON_PHYRDY_CHG = (1 << 4),
150 IE_ON_SIGNATURE_UPDATE = (1 << 3),
151 IE_ON_SNOTIFY_UPDATE = (1 << 2),
152 IE_ON_SINGL_DEVICE_ERR = (1 << 1),
153 IE_ON_CMD_COMPLETE = 1,
154
155 DEFAULT_PORT_IRQ_ENABLE_MASK = IE_ON_FATAL_ERR | IE_ON_PHYRDY_CHG |
156 IE_ON_SIGNATURE_UPDATE |
157 IE_ON_SINGL_DEVICE_ERR | IE_ON_CMD_COMPLETE,
158
159 EXT_INDIRECT_SEG_PRD_FLAG = (1 << 31),
160 DATA_SNOOP_ENABLE = (1 << 22),
161};
162
163/*
164 * SATA Superset Registers
165 */
166enum {
167 SSTATUS = 0,
168 SERROR = 4,
169 SCONTROL = 8,
170 SNOTIFY = 0xC,
171};
172
173/*
174 * Control Status Register Set
175 */
176enum {
177 TRANSCFG = 0,
178 TRANSSTATUS = 4,
179 LINKCFG = 8,
180 LINKCFG1 = 0xC,
181 LINKCFG2 = 0x10,
182 LINKSTATUS = 0x14,
183 LINKSTATUS1 = 0x18,
184 PHYCTRLCFG = 0x1C,
185 COMMANDSTAT = 0x20,
186};
187
188/* PHY (link-layer) configuration control */
189enum {
190 PHY_BIST_ENABLE = 0x01,
191};
192
193/*
194 * Command Header Table entry, i.e, command slot
195 * 4 Dwords per command slot, command header size == 64 Dwords.
196 */
197struct cmdhdr_tbl_entry {
198 u32 cda;
199 u32 prde_fis_len;
200 u32 ttl;
201 u32 desc_info;
202};
203
204/*
205 * Description information bitdefs
206 */
207enum {
208 VENDOR_SPECIFIC_BIST = (1 << 10),
209 CMD_DESC_SNOOP_ENABLE = (1 << 9),
210 FPDMA_QUEUED_CMD = (1 << 8),
211 SRST_CMD = (1 << 7),
212 BIST = (1 << 6),
213 ATAPI_CMD = (1 << 5),
214};
215
216/*
217 * Command Descriptor
218 */
219struct command_desc {
220 u8 cfis[8 * 4];
221 u8 sfis[8 * 4];
222 u8 acmd[4 * 4];
223 u8 fill[4 * 4];
224 u32 prdt[SATA_FSL_MAX_PRD_DIRECT * 4];
225 u32 prdt_indirect[(SATA_FSL_MAX_PRD - SATA_FSL_MAX_PRD_DIRECT) * 4];
226};
227
228/*
229 * Physical region table descriptor(PRD)
230 */
231
232struct prde {
233 u32 dba;
234 u8 fill[2 * 4];
235 u32 ddc_and_ext;
236};
237
238/*
239 * ata_port private data
240 * This is our per-port instance data.
241 */
242struct sata_fsl_port_priv {
243 struct cmdhdr_tbl_entry *cmdslot;
244 dma_addr_t cmdslot_paddr;
245 struct command_desc *cmdentry;
246 dma_addr_t cmdentry_paddr;
faf0b2e5
LY
247};
248
249/*
250 * ata_port->host_set private data
251 */
252struct sata_fsl_host_priv {
253 void __iomem *hcr_base;
254 void __iomem *ssr_base;
255 void __iomem *csr_base;
79b3edc9 256 int irq;
faf0b2e5
LY
257};
258
259static inline unsigned int sata_fsl_tag(unsigned int tag,
520d3a1a 260 void __iomem *hcr_base)
faf0b2e5
LY
261{
262 /* We let libATA core do actual (queue) tag allocation */
263
264 /* all non NCQ/queued commands should have tag#0 */
265 if (ata_tag_internal(tag)) {
266 DPRINTK("mapping internal cmds to tag#0\n");
267 return 0;
268 }
269
270 if (unlikely(tag >= SATA_FSL_QUEUE_DEPTH)) {
271 DPRINTK("tag %d invalid : out of range\n", tag);
272 return 0;
273 }
274
275 if (unlikely((ioread32(hcr_base + CQ)) & (1 << tag))) {
276 DPRINTK("tag %d invalid : in use!!\n", tag);
277 return 0;
278 }
279
280 return tag;
281}
282
283static void sata_fsl_setup_cmd_hdr_entry(struct sata_fsl_port_priv *pp,
284 unsigned int tag, u32 desc_info,
285 u32 data_xfer_len, u8 num_prde,
286 u8 fis_len)
287{
288 dma_addr_t cmd_descriptor_address;
289
290 cmd_descriptor_address = pp->cmdentry_paddr +
291 tag * SATA_FSL_CMD_DESC_SIZE;
292
293 /* NOTE: both data_xfer_len & fis_len are Dword counts */
294
295 pp->cmdslot[tag].cda = cpu_to_le32(cmd_descriptor_address);
296 pp->cmdslot[tag].prde_fis_len =
297 cpu_to_le32((num_prde << 16) | (fis_len << 2));
298 pp->cmdslot[tag].ttl = cpu_to_le32(data_xfer_len & ~0x03);
520d3a1a 299 pp->cmdslot[tag].desc_info = cpu_to_le32(desc_info | (tag & 0x1F));
faf0b2e5
LY
300
301 VPRINTK("cda=0x%x, prde_fis_len=0x%x, ttl=0x%x, di=0x%x\n",
302 pp->cmdslot[tag].cda,
303 pp->cmdslot[tag].prde_fis_len,
304 pp->cmdslot[tag].ttl, pp->cmdslot[tag].desc_info);
305
306}
307
308static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc,
520d3a1a 309 u32 *ttl, dma_addr_t cmd_desc_paddr)
faf0b2e5
LY
310{
311 struct scatterlist *sg;
312 unsigned int num_prde = 0;
313 u32 ttl_dwords = 0;
314
315 /*
316 * NOTE : direct & indirect prdt's are contigiously allocated
317 */
318 struct prde *prd = (struct prde *)&((struct command_desc *)
319 cmd_desc)->prdt;
320
321 struct prde *prd_ptr_to_indirect_ext = NULL;
322 unsigned indirect_ext_segment_sz = 0;
323 dma_addr_t indirect_ext_segment_paddr;
ff2aeb1e 324 unsigned int si;
faf0b2e5 325
b1f5dc48 326 VPRINTK("SATA FSL : cd = 0x%p, prd = 0x%p\n", cmd_desc, prd);
faf0b2e5
LY
327
328 indirect_ext_segment_paddr = cmd_desc_paddr +
329 SATA_FSL_CMD_DESC_OFFSET_TO_PRDT + SATA_FSL_MAX_PRD_DIRECT * 16;
330
ff2aeb1e 331 for_each_sg(qc->sg, sg, qc->n_elem, si) {
faf0b2e5
LY
332 dma_addr_t sg_addr = sg_dma_address(sg);
333 u32 sg_len = sg_dma_len(sg);
334
335 VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%x, sg_len = %d\n",
336 sg_addr, sg_len);
337
338 /* warn if each s/g element is not dword aligned */
339 if (sg_addr & 0x03)
340 ata_port_printk(qc->ap, KERN_ERR,
341 "s/g addr unaligned : 0x%x\n", sg_addr);
342 if (sg_len & 0x03)
343 ata_port_printk(qc->ap, KERN_ERR,
344 "s/g len unaligned : 0x%x\n", sg_len);
345
37198e30
JB
346 if (num_prde == (SATA_FSL_MAX_PRD_DIRECT - 1) &&
347 sg_next(sg) != NULL) {
faf0b2e5
LY
348 VPRINTK("setting indirect prde\n");
349 prd_ptr_to_indirect_ext = prd;
350 prd->dba = cpu_to_le32(indirect_ext_segment_paddr);
351 indirect_ext_segment_sz = 0;
352 ++prd;
353 ++num_prde;
354 }
355
356 ttl_dwords += sg_len;
357 prd->dba = cpu_to_le32(sg_addr);
358 prd->ddc_and_ext =
359 cpu_to_le32(DATA_SNOOP_ENABLE | (sg_len & ~0x03));
360
361 VPRINTK("sg_fill, ttl=%d, dba=0x%x, ddc=0x%x\n",
362 ttl_dwords, prd->dba, prd->ddc_and_ext);
363
364 ++num_prde;
365 ++prd;
366 if (prd_ptr_to_indirect_ext)
367 indirect_ext_segment_sz += sg_len;
368 }
369
370 if (prd_ptr_to_indirect_ext) {
371 /* set indirect extension flag along with indirect ext. size */
372 prd_ptr_to_indirect_ext->ddc_and_ext =
373 cpu_to_le32((EXT_INDIRECT_SEG_PRD_FLAG |
374 DATA_SNOOP_ENABLE |
375 (indirect_ext_segment_sz & ~0x03)));
376 }
377
378 *ttl = ttl_dwords;
379 return num_prde;
380}
381
382static void sata_fsl_qc_prep(struct ata_queued_cmd *qc)
383{
384 struct ata_port *ap = qc->ap;
385 struct sata_fsl_port_priv *pp = ap->private_data;
386 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
387 void __iomem *hcr_base = host_priv->hcr_base;
388 unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
389 struct command_desc *cd;
390 u32 desc_info = CMD_DESC_SNOOP_ENABLE;
391 u32 num_prde = 0;
392 u32 ttl_dwords = 0;
393 dma_addr_t cd_paddr;
394
395 cd = (struct command_desc *)pp->cmdentry + tag;
396 cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE;
397
520d3a1a 398 ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) &cd->cfis);
faf0b2e5
LY
399
400 VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n",
401 cd->cfis[0], cd->cfis[1], cd->cfis[2]);
402
403 if (qc->tf.protocol == ATA_PROT_NCQ) {
404 VPRINTK("FPDMA xfer,Sctor cnt[0:7],[8:15] = %d,%d\n",
405 cd->cfis[3], cd->cfis[11]);
406 }
407
408 /* setup "ACMD - atapi command" in cmd. desc. if this is ATAPI cmd */
405e66b3 409 if (ata_is_atapi(qc->tf.protocol)) {
faf0b2e5
LY
410 desc_info |= ATAPI_CMD;
411 memset((void *)&cd->acmd, 0, 32);
412 memcpy((void *)&cd->acmd, qc->cdb, qc->dev->cdb_len);
413 }
414
415 if (qc->flags & ATA_QCFLAG_DMAMAP)
416 num_prde = sata_fsl_fill_sg(qc, (void *)cd,
417 &ttl_dwords, cd_paddr);
418
419 if (qc->tf.protocol == ATA_PROT_NCQ)
420 desc_info |= FPDMA_QUEUED_CMD;
421
422 sata_fsl_setup_cmd_hdr_entry(pp, tag, desc_info, ttl_dwords,
423 num_prde, 5);
424
425 VPRINTK("SATA FSL : xx_qc_prep, di = 0x%x, ttl = %d, num_prde = %d\n",
426 desc_info, ttl_dwords, num_prde);
427}
428
429static unsigned int sata_fsl_qc_issue(struct ata_queued_cmd *qc)
430{
431 struct ata_port *ap = qc->ap;
432 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
433 void __iomem *hcr_base = host_priv->hcr_base;
434 unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
435
436 VPRINTK("xx_qc_issue called,CQ=0x%x,CA=0x%x,CE=0x%x,CC=0x%x\n",
437 ioread32(CQ + hcr_base),
438 ioread32(CA + hcr_base),
439 ioread32(CE + hcr_base), ioread32(CC + hcr_base));
440
441 /* Simply queue command to the controller/device */
442 iowrite32(1 << tag, CQ + hcr_base);
443
444 VPRINTK("xx_qc_issue called, tag=%d, CQ=0x%x, CA=0x%x\n",
445 tag, ioread32(CQ + hcr_base), ioread32(CA + hcr_base));
446
447 VPRINTK("CE=0x%x, DE=0x%x, CC=0x%x, CmdStat = 0x%x\n",
448 ioread32(CE + hcr_base),
449 ioread32(DE + hcr_base),
b1f5dc48
AV
450 ioread32(CC + hcr_base),
451 ioread32(COMMANDSTAT + host_priv->csr_base));
faf0b2e5
LY
452
453 return 0;
454}
455
4c9bf4e7
TH
456static bool sata_fsl_qc_fill_rtf(struct ata_queued_cmd *qc)
457{
458 struct sata_fsl_port_priv *pp = qc->ap->private_data;
459 struct sata_fsl_host_priv *host_priv = qc->ap->host->private_data;
460 void __iomem *hcr_base = host_priv->hcr_base;
461 unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
462 struct command_desc *cd;
463
464 cd = pp->cmdentry + tag;
465
466 ata_tf_from_fis(cd->sfis, &qc->result_tf);
467 return true;
468}
469
faf0b2e5
LY
470static int sata_fsl_scr_write(struct ata_port *ap, unsigned int sc_reg_in,
471 u32 val)
472{
473 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
474 void __iomem *ssr_base = host_priv->ssr_base;
475 unsigned int sc_reg;
476
477 switch (sc_reg_in) {
478 case SCR_STATUS:
faf0b2e5 479 case SCR_ERROR:
faf0b2e5 480 case SCR_CONTROL:
faf0b2e5 481 case SCR_ACTIVE:
9465d532 482 sc_reg = sc_reg_in;
faf0b2e5
LY
483 break;
484 default:
485 return -EINVAL;
486 }
487
488 VPRINTK("xx_scr_write, reg_in = %d\n", sc_reg);
489
2a52e8d4 490 iowrite32(val, ssr_base + (sc_reg * 4));
faf0b2e5
LY
491 return 0;
492}
493
494static int sata_fsl_scr_read(struct ata_port *ap, unsigned int sc_reg_in,
495 u32 *val)
496{
497 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
498 void __iomem *ssr_base = host_priv->ssr_base;
499 unsigned int sc_reg;
500
501 switch (sc_reg_in) {
502 case SCR_STATUS:
faf0b2e5 503 case SCR_ERROR:
faf0b2e5 504 case SCR_CONTROL:
faf0b2e5 505 case SCR_ACTIVE:
9465d532 506 sc_reg = sc_reg_in;
faf0b2e5
LY
507 break;
508 default:
509 return -EINVAL;
510 }
511
512 VPRINTK("xx_scr_read, reg_in = %d\n", sc_reg);
513
2a52e8d4 514 *val = ioread32(ssr_base + (sc_reg * 4));
faf0b2e5
LY
515 return 0;
516}
517
518static void sata_fsl_freeze(struct ata_port *ap)
519{
520 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
521 void __iomem *hcr_base = host_priv->hcr_base;
522 u32 temp;
523
524 VPRINTK("xx_freeze, CQ=0x%x, CA=0x%x, CE=0x%x, DE=0x%x\n",
525 ioread32(CQ + hcr_base),
526 ioread32(CA + hcr_base),
527 ioread32(CE + hcr_base), ioread32(DE + hcr_base));
b1f5dc48
AV
528 VPRINTK("CmdStat = 0x%x\n",
529 ioread32(host_priv->csr_base + COMMANDSTAT));
faf0b2e5
LY
530
531 /* disable interrupts on the controller/port */
532 temp = ioread32(hcr_base + HCONTROL);
533 iowrite32((temp & ~0x3F), hcr_base + HCONTROL);
534
535 VPRINTK("in xx_freeze : HControl = 0x%x, HStatus = 0x%x\n",
536 ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
537}
538
539static void sata_fsl_thaw(struct ata_port *ap)
540{
541 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
542 void __iomem *hcr_base = host_priv->hcr_base;
543 u32 temp;
544
545 /* ack. any pending IRQs for this controller/port */
546 temp = ioread32(hcr_base + HSTATUS);
547
548 VPRINTK("xx_thaw, pending IRQs = 0x%x\n", (temp & 0x3F));
549
550 if (temp & 0x3F)
551 iowrite32((temp & 0x3F), hcr_base + HSTATUS);
552
553 /* enable interrupts on the controller/port */
554 temp = ioread32(hcr_base + HCONTROL);
555 iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL);
556
557 VPRINTK("xx_thaw : HControl = 0x%x, HStatus = 0x%x\n",
558 ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
559}
560
faf0b2e5
LY
561static int sata_fsl_port_start(struct ata_port *ap)
562{
563 struct device *dev = ap->host->dev;
564 struct sata_fsl_port_priv *pp;
565 int retval;
566 void *mem;
567 dma_addr_t mem_dma;
568 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
569 void __iomem *hcr_base = host_priv->hcr_base;
570 u32 temp;
571
572 pp = kzalloc(sizeof(*pp), GFP_KERNEL);
573 if (!pp)
574 return -ENOMEM;
575
faf0b2e5
LY
576 mem = dma_alloc_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ, &mem_dma,
577 GFP_KERNEL);
578 if (!mem) {
faf0b2e5
LY
579 kfree(pp);
580 return -ENOMEM;
581 }
582 memset(mem, 0, SATA_FSL_PORT_PRIV_DMA_SZ);
583
584 pp->cmdslot = mem;
585 pp->cmdslot_paddr = mem_dma;
586
587 mem += SATA_FSL_CMD_SLOT_SIZE;
588 mem_dma += SATA_FSL_CMD_SLOT_SIZE;
589
590 pp->cmdentry = mem;
591 pp->cmdentry_paddr = mem_dma;
592
593 ap->private_data = pp;
594
595 VPRINTK("CHBA = 0x%x, cmdentry_phys = 0x%x\n",
596 pp->cmdslot_paddr, pp->cmdentry_paddr);
597
598 /* Now, update the CHBA register in host controller cmd register set */
599 iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA);
600
601 /*
602 * Now, we can bring the controller on-line & also initiate
603 * the COMINIT sequence, we simply return here and the boot-probing
604 * & device discovery process is re-initiated by libATA using a
605 * Softreset EH (dummy) session. Hence, boot probing and device
606 * discovey will be part of sata_fsl_softreset() callback.
607 */
608
609 temp = ioread32(hcr_base + HCONTROL);
610 iowrite32((temp | HCONTROL_ONLINE_PHY_RST), hcr_base + HCONTROL);
611
612 VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
613 VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
614 VPRINTK("CHBA = 0x%x\n", ioread32(hcr_base + CHBA));
615
e7eac96e 616#ifdef CONFIG_MPC8315_DS
faf0b2e5
LY
617 /*
618 * Workaround for 8315DS board 3gbps link-up issue,
619 * currently limit SATA port to GEN1 speed
620 */
621 sata_fsl_scr_read(ap, SCR_CONTROL, &temp);
622 temp &= ~(0xF << 4);
623 temp |= (0x1 << 4);
624 sata_fsl_scr_write(ap, SCR_CONTROL, temp);
625
626 sata_fsl_scr_read(ap, SCR_CONTROL, &temp);
627 dev_printk(KERN_WARNING, dev, "scr_control, speed limited to %x\n",
628 temp);
e7eac96e 629#endif
faf0b2e5
LY
630
631 return 0;
632}
633
634static void sata_fsl_port_stop(struct ata_port *ap)
635{
636 struct device *dev = ap->host->dev;
637 struct sata_fsl_port_priv *pp = ap->private_data;
638 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
639 void __iomem *hcr_base = host_priv->hcr_base;
640 u32 temp;
641
642 /*
643 * Force host controller to go off-line, aborting current operations
644 */
645 temp = ioread32(hcr_base + HCONTROL);
646 temp &= ~HCONTROL_ONLINE_PHY_RST;
647 temp |= HCONTROL_FORCE_OFFLINE;
648 iowrite32(temp, hcr_base + HCONTROL);
649
650 /* Poll for controller to go offline - should happen immediately */
651 ata_wait_register(hcr_base + HSTATUS, ONLINE, ONLINE, 1, 1);
652
653 ap->private_data = NULL;
654 dma_free_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ,
655 pp->cmdslot, pp->cmdslot_paddr);
656
faf0b2e5
LY
657 kfree(pp);
658}
659
660static unsigned int sata_fsl_dev_classify(struct ata_port *ap)
661{
662 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
663 void __iomem *hcr_base = host_priv->hcr_base;
664 struct ata_taskfile tf;
665 u32 temp;
666
667 temp = ioread32(hcr_base + SIGNATURE);
668
669 VPRINTK("raw sig = 0x%x\n", temp);
670 VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
671 VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
672
673 tf.lbah = (temp >> 24) & 0xff;
674 tf.lbam = (temp >> 16) & 0xff;
675 tf.lbal = (temp >> 8) & 0xff;
676 tf.nsect = temp & 0xff;
677
678 return ata_dev_classify(&tf);
679}
680
1bf617b7 681static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
faf0b2e5
LY
682 unsigned long deadline)
683{
1bf617b7 684 struct ata_port *ap = link->ap;
faf0b2e5
LY
685 struct sata_fsl_port_priv *pp = ap->private_data;
686 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
687 void __iomem *hcr_base = host_priv->hcr_base;
688 u32 temp;
689 struct ata_taskfile tf;
690 u8 *cfis;
691 u32 Serror;
692 int i = 0;
faf0b2e5
LY
693 unsigned long start_jiffies;
694
695 DPRINTK("in xx_softreset\n");
696
697try_offline_again:
698 /*
699 * Force host controller to go off-line, aborting current operations
700 */
701 temp = ioread32(hcr_base + HCONTROL);
702 temp &= ~HCONTROL_ONLINE_PHY_RST;
703 iowrite32(temp, hcr_base + HCONTROL);
704
705 /* Poll for controller to go offline */
706 temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, ONLINE, 1, 500);
707
708 if (temp & ONLINE) {
709 ata_port_printk(ap, KERN_ERR,
710 "Softreset failed, not off-lined %d\n", i);
711
712 /*
713 * Try to offline controller atleast twice
714 */
715 i++;
716 if (i == 2)
717 goto err;
718 else
719 goto try_offline_again;
720 }
721
722 DPRINTK("softreset, controller off-lined\n");
723 VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
724 VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
725
726 /*
727 * PHY reset should remain asserted for atleast 1ms
728 */
729 msleep(1);
730
731 /*
732 * Now, bring the host controller online again, this can take time
733 * as PHY reset and communication establishment, 1st D2H FIS and
734 * device signature update is done, on safe side assume 500ms
735 * NOTE : Host online status may be indicated immediately!!
736 */
737
738 temp = ioread32(hcr_base + HCONTROL);
739 temp |= (HCONTROL_ONLINE_PHY_RST | HCONTROL_SNOOP_ENABLE);
740 iowrite32(temp, hcr_base + HCONTROL);
741
742 temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, 0, 1, 500);
743
744 if (!(temp & ONLINE)) {
745 ata_port_printk(ap, KERN_ERR,
746 "Softreset failed, not on-lined\n");
747 goto err;
748 }
749
750 DPRINTK("softreset, controller off-lined & on-lined\n");
751 VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
752 VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
753
754 /*
755 * First, wait for the PHYRDY change to occur before waiting for
756 * the signature, and also verify if SStatus indicates device
757 * presence
758 */
759
760 temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0, 1, 500);
1bf617b7 761 if ((!(temp & 0x10)) || ata_link_offline(link)) {
faf0b2e5
LY
762 ata_port_printk(ap, KERN_WARNING,
763 "No Device OR PHYRDY change,Hstatus = 0x%x\n",
764 ioread32(hcr_base + HSTATUS));
765 goto err;
766 }
767
768 /*
769 * Wait for the first D2H from device,i.e,signature update notification
770 */
771 start_jiffies = jiffies;
772 temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0x10,
773 500, jiffies_to_msecs(deadline - start_jiffies));
774
775 if ((temp & 0xFF) != 0x18) {
776 ata_port_printk(ap, KERN_WARNING, "No Signature Update\n");
777 goto err;
778 } else {
779 ata_port_printk(ap, KERN_INFO,
780 "Signature Update detected @ %d msecs\n",
781 jiffies_to_msecs(jiffies - start_jiffies));
782 }
783
784 /*
785 * Send a device reset (SRST) explicitly on command slot #0
786 * Check : will the command queue (reg) be cleared during offlining ??
787 * Also we will be online only if Phy commn. has been established
788 * and device presence has been detected, therefore if we have
789 * reached here, we can send a command to the target device
790 */
791
faf0b2e5
LY
792 DPRINTK("Sending SRST/device reset\n");
793
1bf617b7 794 ata_tf_init(link->device, &tf);
520d3a1a 795 cfis = (u8 *) &pp->cmdentry->cfis;
faf0b2e5
LY
796
797 /* device reset/SRST is a control register update FIS, uses tag0 */
798 sata_fsl_setup_cmd_hdr_entry(pp, 0,
799 SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
800
801 tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */
802 ata_tf_to_fis(&tf, 0, 0, cfis);
803
804 DPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x, 0x%x\n",
805 cfis[0], cfis[1], cfis[2], cfis[3]);
806
807 /*
808 * Queue SRST command to the controller/device, ensure that no
809 * other commands are active on the controller/device
810 */
811
812 DPRINTK("@Softreset, CQ = 0x%x, CA = 0x%x, CC = 0x%x\n",
813 ioread32(CQ + hcr_base),
814 ioread32(CA + hcr_base), ioread32(CC + hcr_base));
815
816 iowrite32(0xFFFF, CC + hcr_base);
817 iowrite32(1, CQ + hcr_base);
818
819 temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000);
820 if (temp & 0x1) {
821 ata_port_printk(ap, KERN_WARNING, "ATA_SRST issue failed\n");
822
823 DPRINTK("Softreset@5000,CQ=0x%x,CA=0x%x,CC=0x%x\n",
824 ioread32(CQ + hcr_base),
825 ioread32(CA + hcr_base), ioread32(CC + hcr_base));
826
827 sata_fsl_scr_read(ap, SCR_ERROR, &Serror);
828
829 DPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
830 DPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
831 DPRINTK("Serror = 0x%x\n", Serror);
832 goto err;
833 }
834
835 msleep(1);
836
837 /*
838 * SATA device enters reset state after receving a Control register
839 * FIS with SRST bit asserted and it awaits another H2D Control reg.
840 * FIS with SRST bit cleared, then the device does internal diags &
841 * initialization, followed by indicating it's initialization status
842 * using ATA signature D2H register FIS to the host controller.
843 */
844
845 sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
846
847 tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */
848 ata_tf_to_fis(&tf, 0, 0, cfis);
849
850 iowrite32(1, CQ + hcr_base);
851 msleep(150); /* ?? */
852
853 /*
854 * The above command would have signalled an interrupt on command
855 * complete, which needs special handling, by clearing the Nth
856 * command bit of the CCreg
857 */
858 iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */
faf0b2e5
LY
859
860 DPRINTK("SATA FSL : Now checking device signature\n");
861
862 *class = ATA_DEV_NONE;
863
864 /* Verify if SStatus indicates device presence */
1bf617b7 865 if (ata_link_online(link)) {
faf0b2e5
LY
866 /*
867 * if we are here, device presence has been detected,
868 * 1st D2H FIS would have been received, but sfis in
869 * command desc. is not updated, but signature register
870 * would have been updated
871 */
872
873 *class = sata_fsl_dev_classify(ap);
874
875 DPRINTK("class = %d\n", *class);
876 VPRINTK("ccreg = 0x%x\n", ioread32(hcr_base + CC));
877 VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE));
878 }
879
880 return 0;
881
882err:
883 return -EIO;
884}
885
faf0b2e5
LY
886static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc)
887{
888 if (qc->flags & ATA_QCFLAG_FAILED)
889 qc->err_mask |= AC_ERR_OTHER;
890
891 if (qc->err_mask) {
892 /* make DMA engine forget about the failed command */
893
894 }
895}
896
faf0b2e5
LY
897static void sata_fsl_error_intr(struct ata_port *ap)
898{
1bf617b7
LY
899 struct ata_link *link = &ap->link;
900 struct ata_eh_info *ehi = &link->eh_info;
faf0b2e5
LY
901 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
902 void __iomem *hcr_base = host_priv->hcr_base;
903 u32 hstatus, dereg, cereg = 0, SError = 0;
904 unsigned int err_mask = 0, action = 0;
905 struct ata_queued_cmd *qc;
906 int freeze = 0;
907
908 hstatus = ioread32(hcr_base + HSTATUS);
909 cereg = ioread32(hcr_base + CE);
910
911 ata_ehi_clear_desc(ehi);
912
913 /*
914 * Handle & Clear SError
915 */
916
917 sata_fsl_scr_read(ap, SCR_ERROR, &SError);
918 if (unlikely(SError & 0xFFFF0000)) {
919 sata_fsl_scr_write(ap, SCR_ERROR, SError);
920 err_mask |= AC_ERR_ATA_BUS;
921 }
922
923 DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n",
924 hstatus, cereg, ioread32(hcr_base + DE), SError);
925
926 /* handle single device errors */
927 if (cereg) {
928 /*
929 * clear the command error, also clears queue to the device
930 * in error, and we can (re)issue commands to this device.
931 * When a device is in error all commands queued into the
932 * host controller and at the device are considered aborted
933 * and the queue for that device is stopped. Now, after
934 * clearing the device error, we can issue commands to the
935 * device to interrogate it to find the source of the error.
936 */
937 dereg = ioread32(hcr_base + DE);
938 iowrite32(dereg, hcr_base + DE);
939 iowrite32(cereg, hcr_base + CE);
940
941 DPRINTK("single device error, CE=0x%x, DE=0x%x\n",
942 ioread32(hcr_base + CE), ioread32(hcr_base + DE));
943 /*
944 * We should consider this as non fatal error, and TF must
945 * be updated as done below.
946 */
947
948 err_mask |= AC_ERR_DEV;
949 }
950
951 /* handle fatal errors */
952 if (hstatus & FATAL_ERROR_DECODE) {
953 err_mask |= AC_ERR_ATA_BUS;
cf480626 954 action |= ATA_EH_RESET;
faf0b2e5
LY
955 /* how will fatal error interrupts be completed ?? */
956 freeze = 1;
957 }
958
959 /* Handle PHYRDY change notification */
960 if (hstatus & INT_ON_PHYRDY_CHG) {
961 DPRINTK("SATA FSL: PHYRDY change indication\n");
962
963 /* Setup a soft-reset EH action */
964 ata_ehi_hotplugged(ehi);
965 freeze = 1;
966 }
967
968 /* record error info */
1bf617b7 969 qc = ata_qc_from_tag(ap, link->active_tag);
faf0b2e5 970
520d06f9 971 if (qc)
faf0b2e5 972 qc->err_mask |= err_mask;
520d06f9 973 else
faf0b2e5
LY
974 ehi->err_mask |= err_mask;
975
976 ehi->action |= action;
977 ehi->serror |= SError;
978
979 /* freeze or abort */
980 if (freeze)
981 ata_port_freeze(ap);
982 else
983 ata_port_abort(ap);
984}
985
faf0b2e5
LY
986static void sata_fsl_host_intr(struct ata_port *ap)
987{
1bf617b7 988 struct ata_link *link = &ap->link;
faf0b2e5
LY
989 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
990 void __iomem *hcr_base = host_priv->hcr_base;
991 u32 hstatus, qc_active = 0;
992 struct ata_queued_cmd *qc;
993 u32 SError;
994
995 hstatus = ioread32(hcr_base + HSTATUS);
996
997 sata_fsl_scr_read(ap, SCR_ERROR, &SError);
998
999 if (unlikely(SError & 0xFFFF0000)) {
1000 DPRINTK("serror @host_intr : 0x%x\n", SError);
1001 sata_fsl_error_intr(ap);
1002
1003 }
1004
1005 if (unlikely(hstatus & INT_ON_ERROR)) {
1006 DPRINTK("error interrupt!!\n");
1007 sata_fsl_error_intr(ap);
1008 return;
1009 }
1010
1bf617b7 1011 if (link->sactive) { /* only true for NCQ commands */
faf0b2e5
LY
1012 int i;
1013 /* Read command completed register */
1014 qc_active = ioread32(hcr_base + CC);
1015 /* clear CC bit, this will also complete the interrupt */
1016 iowrite32(qc_active, hcr_base + CC);
1017
1018 DPRINTK("Status of all queues :\n");
1019 DPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x\n",
1020 qc_active, ioread32(hcr_base + CA),
1021 ioread32(hcr_base + CE));
1022
1023 for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) {
1024 if (qc_active & (1 << i)) {
1025 qc = ata_qc_from_tag(ap, i);
520d06f9 1026 if (qc)
faf0b2e5 1027 ata_qc_complete(qc);
faf0b2e5
LY
1028 DPRINTK
1029 ("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n",
1030 i, ioread32(hcr_base + CC),
1031 ioread32(hcr_base + CA));
1032 }
1033 }
1034 return;
1035
1036 } else if (ap->qc_active) {
1037 iowrite32(1, hcr_base + CC);
1bf617b7 1038 qc = ata_qc_from_tag(ap, link->active_tag);
faf0b2e5
LY
1039
1040 DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n",
1bf617b7 1041 link->active_tag, ioread32(hcr_base + CC));
faf0b2e5 1042
520d06f9 1043 if (qc)
faf0b2e5 1044 ata_qc_complete(qc);
faf0b2e5
LY
1045 } else {
1046 /* Spurious Interrupt!! */
1047 DPRINTK("spurious interrupt!!, CC = 0x%x\n",
1048 ioread32(hcr_base + CC));
1049 return;
1050 }
1051}
1052
1053static irqreturn_t sata_fsl_interrupt(int irq, void *dev_instance)
1054{
1055 struct ata_host *host = dev_instance;
1056 struct sata_fsl_host_priv *host_priv = host->private_data;
1057 void __iomem *hcr_base = host_priv->hcr_base;
1058 u32 interrupt_enables;
1059 unsigned handled = 0;
1060 struct ata_port *ap;
1061
1062 /* ack. any pending IRQs for this controller/port */
1063 interrupt_enables = ioread32(hcr_base + HSTATUS);
1064 interrupt_enables &= 0x3F;
1065
1066 DPRINTK("interrupt status 0x%x\n", interrupt_enables);
1067
1068 if (!interrupt_enables)
1069 return IRQ_NONE;
1070
1071 spin_lock(&host->lock);
1072
1073 /* Assuming one port per host controller */
1074
1075 ap = host->ports[0];
1076 if (ap) {
1077 sata_fsl_host_intr(ap);
1078 } else {
1079 dev_printk(KERN_WARNING, host->dev,
1080 "interrupt on disabled port 0\n");
1081 }
1082
1083 iowrite32(interrupt_enables, hcr_base + HSTATUS);
1084 handled = 1;
1085
1086 spin_unlock(&host->lock);
1087
1088 return IRQ_RETVAL(handled);
1089}
1090
1091/*
1092 * Multiple ports are represented by multiple SATA controllers with
1093 * one port per controller
1094 */
1095static int sata_fsl_init_controller(struct ata_host *host)
1096{
1097 struct sata_fsl_host_priv *host_priv = host->private_data;
1098 void __iomem *hcr_base = host_priv->hcr_base;
1099 u32 temp;
1100
1101 /*
1102 * NOTE : We cannot bring the controller online before setting
1103 * the CHBA, hence main controller initialization is done as
1104 * part of the port_start() callback
1105 */
1106
1107 /* ack. any pending IRQs for this controller/port */
1108 temp = ioread32(hcr_base + HSTATUS);
1109 if (temp & 0x3F)
1110 iowrite32((temp & 0x3F), hcr_base + HSTATUS);
1111
1112 /* Keep interrupts disabled on the controller */
1113 temp = ioread32(hcr_base + HCONTROL);
1114 iowrite32((temp & ~0x3F), hcr_base + HCONTROL);
1115
1116 /* Disable interrupt coalescing control(icc), for the moment */
1117 DPRINTK("icc = 0x%x\n", ioread32(hcr_base + ICC));
1118 iowrite32(0x01000000, hcr_base + ICC);
1119
1120 /* clear error registers, SError is cleared by libATA */
1121 iowrite32(0x00000FFFF, hcr_base + CE);
1122 iowrite32(0x00000FFFF, hcr_base + DE);
1123
1124 /* initially assuming no Port multiplier, set CQPMP to 0 */
1125 iowrite32(0x0, hcr_base + CQPMP);
1126
1127 /*
1128 * host controller will be brought on-line, during xx_port_start()
1129 * callback, that should also initiate the OOB, COMINIT sequence
1130 */
1131
1132 DPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
1133 DPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
1134
1135 return 0;
1136}
1137
1138/*
1139 * scsi mid-layer and libata interface structures
1140 */
1141static struct scsi_host_template sata_fsl_sht = {
68d1d07b 1142 ATA_NCQ_SHT("sata_fsl"),
faf0b2e5 1143 .can_queue = SATA_FSL_QUEUE_DEPTH,
faf0b2e5 1144 .sg_tablesize = SATA_FSL_MAX_PRD_USABLE,
faf0b2e5 1145 .dma_boundary = ATA_DMA_BOUNDARY,
faf0b2e5
LY
1146};
1147
1148static const struct ata_port_operations sata_fsl_ops = {
029cfd6b
TH
1149 .inherits = &sata_port_ops,
1150
faf0b2e5
LY
1151 .qc_prep = sata_fsl_qc_prep,
1152 .qc_issue = sata_fsl_qc_issue,
4c9bf4e7 1153 .qc_fill_rtf = sata_fsl_qc_fill_rtf,
faf0b2e5
LY
1154
1155 .scr_read = sata_fsl_scr_read,
1156 .scr_write = sata_fsl_scr_write,
1157
1158 .freeze = sata_fsl_freeze,
1159 .thaw = sata_fsl_thaw,
a1efdaba 1160 .softreset = sata_fsl_softreset,
faf0b2e5
LY
1161 .post_internal_cmd = sata_fsl_post_internal_cmd,
1162
1163 .port_start = sata_fsl_port_start,
1164 .port_stop = sata_fsl_port_stop,
1165};
1166
1167static const struct ata_port_info sata_fsl_port_info[] = {
1168 {
1169 .flags = SATA_FSL_HOST_FLAGS,
1170 .pio_mask = 0x1f, /* pio 0-4 */
1171 .udma_mask = 0x7f, /* udma 0-6 */
1172 .port_ops = &sata_fsl_ops,
1173 },
1174};
1175
1176static int sata_fsl_probe(struct of_device *ofdev,
1177 const struct of_device_id *match)
1178{
1179 int retval = 0;
1180 void __iomem *hcr_base = NULL;
1181 void __iomem *ssr_base = NULL;
1182 void __iomem *csr_base = NULL;
1183 struct sata_fsl_host_priv *host_priv = NULL;
faf0b2e5
LY
1184 int irq;
1185 struct ata_host *host;
1186
1187 struct ata_port_info pi = sata_fsl_port_info[0];
1188 const struct ata_port_info *ppi[] = { &pi, NULL };
1189
1190 dev_printk(KERN_INFO, &ofdev->dev,
1191 "Sata FSL Platform/CSB Driver init\n");
1192
faf0b2e5
LY
1193 hcr_base = of_iomap(ofdev->node, 0);
1194 if (!hcr_base)
1195 goto error_exit_with_cleanup;
1196
1197 ssr_base = hcr_base + 0x100;
1198 csr_base = hcr_base + 0x140;
1199
1200 DPRINTK("@reset i/o = 0x%x\n", ioread32(csr_base + TRANSCFG));
1201 DPRINTK("sizeof(cmd_desc) = %d\n", sizeof(struct command_desc));
1202 DPRINTK("sizeof(#define cmd_desc) = %d\n", SATA_FSL_CMD_DESC_SIZE);
1203
1204 host_priv = kzalloc(sizeof(struct sata_fsl_host_priv), GFP_KERNEL);
1205 if (!host_priv)
1206 goto error_exit_with_cleanup;
1207
1208 host_priv->hcr_base = hcr_base;
1209 host_priv->ssr_base = ssr_base;
1210 host_priv->csr_base = csr_base;
1211
1212 irq = irq_of_parse_and_map(ofdev->node, 0);
1213 if (irq < 0) {
1214 dev_printk(KERN_ERR, &ofdev->dev, "invalid irq from platform\n");
1215 goto error_exit_with_cleanup;
1216 }
79b3edc9 1217 host_priv->irq = irq;
faf0b2e5
LY
1218
1219 /* allocate host structure */
1220 host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_FSL_MAX_PORTS);
1221
1222 /* host->iomap is not used currently */
1223 host->private_data = host_priv;
1224
faf0b2e5
LY
1225 /* initialize host controller */
1226 sata_fsl_init_controller(host);
1227
1228 /*
1229 * Now, register with libATA core, this will also initiate the
1230 * device discovery process, invoking our port_start() handler &
1231 * error_handler() to execute a dummy Softreset EH session
1232 */
1233 ata_host_activate(host, irq, sata_fsl_interrupt, SATA_FSL_IRQ_FLAG,
1234 &sata_fsl_sht);
1235
1236 dev_set_drvdata(&ofdev->dev, host);
1237
1238 return 0;
1239
1240error_exit_with_cleanup:
1241
1242 if (hcr_base)
1243 iounmap(hcr_base);
1244 if (host_priv)
1245 kfree(host_priv);
1246
1247 return retval;
1248}
1249
1250static int sata_fsl_remove(struct of_device *ofdev)
1251{
1252 struct ata_host *host = dev_get_drvdata(&ofdev->dev);
1253 struct sata_fsl_host_priv *host_priv = host->private_data;
1254
1255 ata_host_detach(host);
1256
1257 dev_set_drvdata(&ofdev->dev, NULL);
1258
79b3edc9 1259 irq_dispose_mapping(host_priv->irq);
faf0b2e5
LY
1260 iounmap(host_priv->hcr_base);
1261 kfree(host_priv);
1262
1263 return 0;
1264}
1265
1266static struct of_device_id fsl_sata_match[] = {
1267 {
96ce1b6d 1268 .compatible = "fsl,pq-sata",
faf0b2e5
LY
1269 },
1270 {},
1271};
1272
1273MODULE_DEVICE_TABLE(of, fsl_sata_match);
1274
1275static struct of_platform_driver fsl_sata_driver = {
1276 .name = "fsl-sata",
1277 .match_table = fsl_sata_match,
1278 .probe = sata_fsl_probe,
1279 .remove = sata_fsl_remove,
1280};
1281
1282static int __init sata_fsl_init(void)
1283{
1284 of_register_platform_driver(&fsl_sata_driver);
1285 return 0;
1286}
1287
1288static void __exit sata_fsl_exit(void)
1289{
1290 of_unregister_platform_driver(&fsl_sata_driver);
1291}
1292
1293MODULE_LICENSE("GPL");
1294MODULE_AUTHOR("Ashish Kalra, Freescale Semiconductor");
1295MODULE_DESCRIPTION("Freescale 3.0Gbps SATA controller low level driver");
1296MODULE_VERSION("1.10");
1297
1298module_init(sata_fsl_init);
1299module_exit(sata_fsl_exit);
This page took 0.130661 seconds and 5 git commands to generate.