Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | |
2 | /* drivers/atm/firestream.c - FireStream 155 (MB86697) and | |
3 | * FireStream 50 (MB86695) device driver | |
4 | */ | |
5 | ||
6 | /* Written & (C) 2000 by R.E.Wolff@BitWizard.nl | |
7 | * Copied snippets from zatm.c by Werner Almesberger, EPFL LRC/ICA | |
8 | * and ambassador.c Copyright (C) 1995-1999 Madge Networks Ltd | |
9 | */ | |
10 | ||
11 | /* | |
12 | This program is free software; you can redistribute it and/or modify | |
13 | it under the terms of the GNU General Public License as published by | |
14 | the Free Software Foundation; either version 2 of the License, or | |
15 | (at your option) any later version. | |
16 | ||
17 | This program is distributed in the hope that it will be useful, | |
18 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
19 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
20 | GNU General Public License for more details. | |
21 | ||
22 | You should have received a copy of the GNU General Public License | |
23 | along with this program; if not, write to the Free Software | |
24 | Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
25 | ||
26 | The GNU GPL is contained in /usr/doc/copyright/GPL on a Debian | |
27 | system and in the file COPYING in the Linux kernel source. | |
28 | */ | |
29 | ||
30 | ||
31 | #include <linux/module.h> | |
32 | #include <linux/sched.h> | |
33 | #include <linux/kernel.h> | |
34 | #include <linux/mm.h> | |
35 | #include <linux/pci.h> | |
b3c681e0 | 36 | #include <linux/poison.h> |
1da177e4 LT |
37 | #include <linux/errno.h> |
38 | #include <linux/atm.h> | |
39 | #include <linux/atmdev.h> | |
40 | #include <linux/sonet.h> | |
41 | #include <linux/skbuff.h> | |
42 | #include <linux/netdevice.h> | |
43 | #include <linux/delay.h> | |
44 | #include <linux/ioport.h> /* for request_region */ | |
45 | #include <linux/uio.h> | |
46 | #include <linux/init.h> | |
a6b7a407 | 47 | #include <linux/interrupt.h> |
1da177e4 LT |
48 | #include <linux/capability.h> |
49 | #include <linux/bitops.h> | |
5a0e3ad6 | 50 | #include <linux/slab.h> |
1da177e4 | 51 | #include <asm/byteorder.h> |
1da177e4 LT |
52 | #include <asm/string.h> |
53 | #include <asm/io.h> | |
60063497 | 54 | #include <linux/atomic.h> |
1da177e4 LT |
55 | #include <asm/uaccess.h> |
56 | #include <linux/wait.h> | |
57 | ||
58 | #include "firestream.h" | |
59 | ||
60 | static int loopback = 0; | |
61 | static int num=0x5a; | |
62 | ||
63 | /* According to measurements (but they look suspicious to me!) done in | |
64 | * '97, 37% of the packets are one cell in size. So it pays to have | |
65 | * buffers allocated at that size. A large jump in percentage of | |
66 | * packets occurs at packets around 536 bytes in length. So it also | |
67 | * pays to have those pre-allocated. Unfortunately, we can't fully | |
68 | * take advantage of this as the majority of the packets is likely to | |
69 | * be TCP/IP (As where obviously the measurement comes from) There the | |
70 | * link would be opened with say a 1500 byte MTU, and we can't handle | |
71 | * smaller buffers more efficiently than the larger ones. -- REW | |
72 | */ | |
73 | ||
74 | /* Due to the way Linux memory management works, specifying "576" as | |
75 | * an allocation size here isn't going to help. They are allocated | |
76 | * from 1024-byte regions anyway. With the size of the sk_buffs (quite | |
77 | * large), it doesn't pay to allocate the smallest size (64) -- REW */ | |
78 | ||
79 | /* This is all guesswork. Hard numbers to back this up or disprove this, | |
80 | * are appreciated. -- REW */ | |
81 | ||
82 | /* The last entry should be about 64k. However, the "buffer size" is | |
83 | * passed to the chip in a 16 bit field. I don't know how "65536" | |
84 | * would be interpreted. -- REW */ | |
85 | ||
86 | #define NP FS_NR_FREE_POOLS | |
87 | static int rx_buf_sizes[NP] = {128, 256, 512, 1024, 2048, 4096, 16384, 65520}; | |
88 | /* log2: 7 8 9 10 11 12 14 16 */ | |
89 | ||
90 | #if 0 | |
91 | static int rx_pool_sizes[NP] = {1024, 1024, 512, 256, 128, 64, 32, 32}; | |
92 | #else | |
93 | /* debug */ | |
94 | static int rx_pool_sizes[NP] = {128, 128, 128, 64, 64, 64, 32, 32}; | |
95 | #endif | |
96 | /* log2: 10 10 9 8 7 6 5 5 */ | |
97 | /* sumlog2: 17 18 18 18 18 18 19 21 */ | |
98 | /* mem allocated: 128k 256k 256k 256k 256k 256k 512k 2M */ | |
99 | /* tot mem: almost 4M */ | |
100 | ||
101 | /* NP is shorter, so that it fits on a single line. */ | |
102 | #undef NP | |
103 | ||
104 | ||
105 | /* Small hardware gotcha: | |
106 | ||
107 | The FS50 CAM (VP/VC match registers) always take the lowest channel | |
108 | number that matches. This is not a problem. | |
109 | ||
110 | However, they also ignore whether the channel is enabled or | |
111 | not. This means that if you allocate channel 0 to 1.2 and then | |
112 | channel 1 to 0.0, then disabeling channel 0 and writing 0 to the | |
113 | match channel for channel 0 will "steal" the traffic from channel | |
114 | 1, even if you correctly disable channel 0. | |
115 | ||
116 | Workaround: | |
117 | ||
118 | - When disabling channels, write an invalid VP/VC value to the | |
119 | match register. (We use 0xffffffff, which in the worst case | |
120 | matches VP/VC = <maxVP>/<maxVC>, but I expect it not to match | |
121 | anything as some "when not in use, program to 0" bits are now | |
122 | programmed to 1...) | |
123 | ||
124 | - Don't initialize the match registers to 0, as 0.0 is a valid | |
125 | channel. | |
126 | */ | |
127 | ||
128 | ||
129 | /* Optimization hints and tips. | |
130 | ||
131 | The FireStream chips are very capable of reducing the amount of | |
132 | "interrupt-traffic" for the CPU. This driver requests an interrupt on EVERY | |
133 | action. You could try to minimize this a bit. | |
134 | ||
135 | Besides that, the userspace->kernel copy and the PCI bus are the | |
136 | performance limiting issues for this driver. | |
137 | ||
138 | You could queue up a bunch of outgoing packets without telling the | |
139 | FireStream. I'm not sure that's going to win you much though. The | |
140 | Linux layer won't tell us in advance when it's not going to give us | |
141 | any more packets in a while. So this is tricky to implement right without | |
142 | introducing extra delays. | |
143 | ||
144 | -- REW | |
145 | */ | |
146 | ||
147 | ||
148 | ||
149 | ||
150 | /* The strings that define what the RX queue entry is all about. */ | |
151 | /* Fujitsu: Please tell me which ones can have a pointer to a | |
152 | freepool descriptor! */ | |
153 | static char *res_strings[] = { | |
154 | "RX OK: streaming not EOP", | |
155 | "RX OK: streaming EOP", | |
156 | "RX OK: Single buffer packet", | |
157 | "RX OK: packet mode", | |
158 | "RX OK: F4 OAM (end to end)", | |
159 | "RX OK: F4 OAM (Segment)", | |
160 | "RX OK: F5 OAM (end to end)", | |
161 | "RX OK: F5 OAM (Segment)", | |
162 | "RX OK: RM cell", | |
163 | "RX OK: TRANSP cell", | |
164 | "RX OK: TRANSPC cell", | |
165 | "Unmatched cell", | |
166 | "reserved 12", | |
167 | "reserved 13", | |
168 | "reserved 14", | |
169 | "Unrecognized cell", | |
170 | "reserved 16", | |
fc4fa6e1 | 171 | "reassembly abort: AAL5 abort", |
1da177e4 LT |
172 | "packet purged", |
173 | "packet ageing timeout", | |
174 | "channel ageing timeout", | |
c5c0f33d JP |
175 | "calculated length error", |
176 | "programmed length limit error", | |
1da177e4 LT |
177 | "aal5 crc32 error", |
178 | "oam transp or transpc crc10 error", | |
179 | "reserved 25", | |
180 | "reserved 26", | |
181 | "reserved 27", | |
182 | "reserved 28", | |
183 | "reserved 29", | |
184 | "reserved 30", | |
185 | "reassembly abort: no buffers", | |
186 | "receive buffer overflow", | |
187 | "change in GFC", | |
188 | "receive buffer full", | |
189 | "low priority discard - no receive descriptor", | |
190 | "low priority discard - missing end of packet", | |
191 | "reserved 41", | |
192 | "reserved 42", | |
193 | "reserved 43", | |
194 | "reserved 44", | |
195 | "reserved 45", | |
196 | "reserved 46", | |
197 | "reserved 47", | |
198 | "reserved 48", | |
199 | "reserved 49", | |
200 | "reserved 50", | |
201 | "reserved 51", | |
202 | "reserved 52", | |
203 | "reserved 53", | |
204 | "reserved 54", | |
205 | "reserved 55", | |
206 | "reserved 56", | |
207 | "reserved 57", | |
208 | "reserved 58", | |
209 | "reserved 59", | |
210 | "reserved 60", | |
211 | "reserved 61", | |
212 | "reserved 62", | |
213 | "reserved 63", | |
214 | }; | |
215 | ||
216 | static char *irq_bitname[] = { | |
217 | "LPCO", | |
218 | "DPCO", | |
219 | "RBRQ0_W", | |
220 | "RBRQ1_W", | |
221 | "RBRQ2_W", | |
222 | "RBRQ3_W", | |
223 | "RBRQ0_NF", | |
224 | "RBRQ1_NF", | |
225 | "RBRQ2_NF", | |
226 | "RBRQ3_NF", | |
227 | "BFP_SC", | |
228 | "INIT", | |
229 | "INIT_ERR", | |
230 | "USCEO", | |
231 | "UPEC0", | |
232 | "VPFCO", | |
233 | "CRCCO", | |
234 | "HECO", | |
235 | "TBRQ_W", | |
236 | "TBRQ_NF", | |
237 | "CTPQ_E", | |
238 | "GFC_C0", | |
239 | "PCI_FTL", | |
240 | "CSQ_W", | |
241 | "CSQ_NF", | |
242 | "EXT_INT", | |
243 | "RXDMA_S" | |
244 | }; | |
245 | ||
246 | ||
247 | #define PHY_EOF -1 | |
248 | #define PHY_CLEARALL -2 | |
249 | ||
250 | struct reginit_item { | |
251 | int reg, val; | |
252 | }; | |
253 | ||
254 | ||
6c44512d | 255 | static struct reginit_item PHY_NTC_INIT[] = { |
1da177e4 LT |
256 | { PHY_CLEARALL, 0x40 }, |
257 | { 0x12, 0x0001 }, | |
258 | { 0x13, 0x7605 }, | |
259 | { 0x1A, 0x0001 }, | |
260 | { 0x1B, 0x0005 }, | |
261 | { 0x38, 0x0003 }, | |
262 | { 0x39, 0x0006 }, /* changed here to make loopback */ | |
263 | { 0x01, 0x5262 }, | |
264 | { 0x15, 0x0213 }, | |
265 | { 0x00, 0x0003 }, | |
266 | { PHY_EOF, 0}, /* -1 signals end of list */ | |
267 | }; | |
268 | ||
269 | ||
270 | /* Safetyfeature: If the card interrupts more than this number of times | |
271 | in a jiffy (1/100th of a second) then we just disable the interrupt and | |
272 | print a message. This prevents the system from hanging. | |
273 | ||
274 | 150000 packets per second is close to the limit a PC is going to have | |
275 | anyway. We therefore have to disable this for production. -- REW */ | |
276 | #undef IRQ_RATE_LIMIT // 100 | |
277 | ||
278 | /* Interrupts work now. Unlike serial cards, ATM cards don't work all | |
279 | that great without interrupts. -- REW */ | |
280 | #undef FS_POLL_FREQ // 100 | |
281 | ||
282 | /* | |
283 | This driver can spew a whole lot of debugging output at you. If you | |
284 | need maximum performance, you should disable the DEBUG define. To | |
285 | aid in debugging in the field, I'm leaving the compile-time debug | |
286 | features enabled, and disable them "runtime". That allows me to | |
287 | instruct people with problems to enable debugging without requiring | |
288 | them to recompile... -- REW | |
289 | */ | |
290 | #define DEBUG | |
291 | ||
292 | #ifdef DEBUG | |
293 | #define fs_dprintk(f, str...) if (fs_debug & f) printk (str) | |
294 | #else | |
295 | #define fs_dprintk(f, str...) /* nothing */ | |
296 | #endif | |
297 | ||
298 | ||
299 | static int fs_keystream = 0; | |
300 | ||
301 | #ifdef DEBUG | |
302 | /* I didn't forget to set this to zero before shipping. Hit me with a stick | |
303 | if you get this with the debug default not set to zero again. -- REW */ | |
304 | static int fs_debug = 0; | |
305 | #else | |
306 | #define fs_debug 0 | |
307 | #endif | |
308 | ||
309 | #ifdef MODULE | |
310 | #ifdef DEBUG | |
311 | module_param(fs_debug, int, 0644); | |
312 | #endif | |
313 | module_param(loopback, int, 0); | |
314 | module_param(num, int, 0); | |
315 | module_param(fs_keystream, int, 0); | |
316 | /* XXX Add rx_buf_sizes, and rx_pool_sizes As per request Amar. -- REW */ | |
317 | #endif | |
318 | ||
319 | ||
320 | #define FS_DEBUG_FLOW 0x00000001 | |
321 | #define FS_DEBUG_OPEN 0x00000002 | |
322 | #define FS_DEBUG_QUEUE 0x00000004 | |
323 | #define FS_DEBUG_IRQ 0x00000008 | |
324 | #define FS_DEBUG_INIT 0x00000010 | |
325 | #define FS_DEBUG_SEND 0x00000020 | |
326 | #define FS_DEBUG_PHY 0x00000040 | |
327 | #define FS_DEBUG_CLEANUP 0x00000080 | |
328 | #define FS_DEBUG_QOS 0x00000100 | |
329 | #define FS_DEBUG_TXQ 0x00000200 | |
330 | #define FS_DEBUG_ALLOC 0x00000400 | |
331 | #define FS_DEBUG_TXMEM 0x00000800 | |
332 | #define FS_DEBUG_QSIZE 0x00001000 | |
333 | ||
334 | ||
5a346a10 HH |
335 | #define func_enter() fs_dprintk(FS_DEBUG_FLOW, "fs: enter %s\n", __func__) |
336 | #define func_exit() fs_dprintk(FS_DEBUG_FLOW, "fs: exit %s\n", __func__) | |
1da177e4 LT |
337 | |
338 | ||
339 | static struct fs_dev *fs_boards = NULL; | |
340 | ||
341 | #ifdef DEBUG | |
342 | ||
343 | static void my_hd (void *addr, int len) | |
344 | { | |
345 | int j, ch; | |
346 | unsigned char *ptr = addr; | |
347 | ||
348 | while (len > 0) { | |
349 | printk ("%p ", ptr); | |
350 | for (j=0;j < ((len < 16)?len:16);j++) { | |
351 | printk ("%02x %s", ptr[j], (j==7)?" ":""); | |
352 | } | |
353 | for ( ;j < 16;j++) { | |
354 | printk (" %s", (j==7)?" ":""); | |
355 | } | |
356 | for (j=0;j < ((len < 16)?len:16);j++) { | |
357 | ch = ptr[j]; | |
358 | printk ("%c", (ch < 0x20)?'.':((ch > 0x7f)?'.':ch)); | |
359 | } | |
360 | printk ("\n"); | |
361 | ptr += 16; | |
362 | len -= 16; | |
363 | } | |
364 | } | |
365 | #else /* DEBUG */ | |
366 | static void my_hd (void *addr, int len){} | |
367 | #endif /* DEBUG */ | |
368 | ||
369 | /********** free an skb (as per ATM device driver documentation) **********/ | |
370 | ||
371 | /* Hmm. If this is ATM specific, why isn't there an ATM routine for this? | |
372 | * I copied it over from the ambassador driver. -- REW */ | |
373 | ||
374 | static inline void fs_kfree_skb (struct sk_buff * skb) | |
375 | { | |
376 | if (ATM_SKB(skb)->vcc->pop) | |
377 | ATM_SKB(skb)->vcc->pop (ATM_SKB(skb)->vcc, skb); | |
378 | else | |
379 | dev_kfree_skb_any (skb); | |
380 | } | |
381 | ||
382 | ||
383 | ||
384 | ||
385 | /* It seems the ATM forum recommends this horribly complicated 16bit | |
386 | * floating point format. Turns out the Ambassador uses the exact same | |
387 | * encoding. I just copied it over. If Mitch agrees, I'll move it over | |
388 | * to the atm_misc file or something like that. (and remove it from | |
389 | * here and the ambassador driver) -- REW | |
390 | */ | |
391 | ||
392 | /* The good thing about this format is that it is monotonic. So, | |
393 | a conversion routine need not be very complicated. To be able to | |
394 | round "nearest" we need to take along a few extra bits. Lets | |
395 | put these after 16 bits, so that we can just return the top 16 | |
396 | bits of the 32bit number as the result: | |
397 | ||
398 | int mr (unsigned int rate, int r) | |
399 | { | |
400 | int e = 16+9; | |
401 | static int round[4]={0, 0, 0xffff, 0x8000}; | |
402 | if (!rate) return 0; | |
403 | while (rate & 0xfc000000) { | |
404 | rate >>= 1; | |
405 | e++; | |
406 | } | |
407 | while (! (rate & 0xfe000000)) { | |
408 | rate <<= 1; | |
409 | e--; | |
410 | } | |
411 | ||
412 | // Now the mantissa is in positions bit 16-25. Excepf for the "hidden 1" that's in bit 26. | |
413 | rate &= ~0x02000000; | |
414 | // Next add in the exponent | |
415 | rate |= e << (16+9); | |
416 | // And perform the rounding: | |
417 | return (rate + round[r]) >> 16; | |
418 | } | |
419 | ||
420 | 14 lines-of-code. Compare that with the 120 that the Ambassador | |
421 | guys needed. (would be 8 lines shorter if I'd try to really reduce | |
422 | the number of lines: | |
423 | ||
424 | int mr (unsigned int rate, int r) | |
425 | { | |
426 | int e = 16+9; | |
427 | static int round[4]={0, 0, 0xffff, 0x8000}; | |
428 | if (!rate) return 0; | |
429 | for (; rate & 0xfc000000 ;rate >>= 1, e++); | |
430 | for (;!(rate & 0xfe000000);rate <<= 1, e--); | |
431 | return ((rate & ~0x02000000) | (e << (16+9)) + round[r]) >> 16; | |
432 | } | |
433 | ||
434 | Exercise for the reader: Remove one more line-of-code, without | |
435 | cheating. (Just joining two lines is cheating). (I know it's | |
436 | possible, don't think you've beat me if you found it... If you | |
437 | manage to lose two lines or more, keep me updated! ;-) | |
438 | ||
439 | -- REW */ | |
440 | ||
441 | ||
442 | #define ROUND_UP 1 | |
443 | #define ROUND_DOWN 2 | |
444 | #define ROUND_NEAREST 3 | |
445 | /********** make rate (not quite as much fun as Horizon) **********/ | |
446 | ||
a0ece285 JL |
447 | static int make_rate(unsigned int rate, int r, |
448 | u16 *bits, unsigned int *actual) | |
1da177e4 LT |
449 | { |
450 | unsigned char exp = -1; /* hush gcc */ | |
451 | unsigned int man = -1; /* hush gcc */ | |
452 | ||
453 | fs_dprintk (FS_DEBUG_QOS, "make_rate %u", rate); | |
454 | ||
455 | /* rates in cells per second, ITU format (nasty 16-bit floating-point) | |
456 | given 5-bit e and 9-bit m: | |
457 | rate = EITHER (1+m/2^9)*2^e OR 0 | |
458 | bits = EITHER 1<<14 | e<<9 | m OR 0 | |
459 | (bit 15 is "reserved", bit 14 "non-zero") | |
460 | smallest rate is 0 (special representation) | |
461 | largest rate is (1+511/512)*2^31 = 4290772992 (< 2^32-1) | |
462 | smallest non-zero rate is (1+0/512)*2^0 = 1 (> 0) | |
463 | simple algorithm: | |
464 | find position of top bit, this gives e | |
465 | remove top bit and shift (rounding if feeling clever) by 9-e | |
466 | */ | |
467 | /* Ambassador ucode bug: please don't set bit 14! so 0 rate not | |
468 | representable. // This should move into the ambassador driver | |
469 | when properly merged. -- REW */ | |
470 | ||
471 | if (rate > 0xffc00000U) { | |
472 | /* larger than largest representable rate */ | |
473 | ||
474 | if (r == ROUND_UP) { | |
475 | return -EINVAL; | |
476 | } else { | |
477 | exp = 31; | |
478 | man = 511; | |
479 | } | |
480 | ||
481 | } else if (rate) { | |
482 | /* representable rate */ | |
483 | ||
484 | exp = 31; | |
485 | man = rate; | |
486 | ||
487 | /* invariant: rate = man*2^(exp-31) */ | |
488 | while (!(man & (1<<31))) { | |
489 | exp = exp - 1; | |
490 | man = man<<1; | |
491 | } | |
492 | ||
493 | /* man has top bit set | |
494 | rate = (2^31+(man-2^31))*2^(exp-31) | |
495 | rate = (1+(man-2^31)/2^31)*2^exp | |
496 | */ | |
497 | man = man<<1; | |
498 | man &= 0xffffffffU; /* a nop on 32-bit systems */ | |
499 | /* rate = (1+man/2^32)*2^exp | |
500 | ||
501 | exp is in the range 0 to 31, man is in the range 0 to 2^32-1 | |
502 | time to lose significance... we want m in the range 0 to 2^9-1 | |
503 | rounding presents a minor problem... we first decide which way | |
504 | we are rounding (based on given rounding direction and possibly | |
505 | the bits of the mantissa that are to be discarded). | |
506 | */ | |
507 | ||
508 | switch (r) { | |
509 | case ROUND_DOWN: { | |
510 | /* just truncate */ | |
511 | man = man>>(32-9); | |
512 | break; | |
513 | } | |
514 | case ROUND_UP: { | |
515 | /* check all bits that we are discarding */ | |
5f3f24fa | 516 | if (man & (~0U>>9)) { |
1da177e4 LT |
517 | man = (man>>(32-9)) + 1; |
518 | if (man == (1<<9)) { | |
519 | /* no need to check for round up outside of range */ | |
520 | man = 0; | |
521 | exp += 1; | |
522 | } | |
523 | } else { | |
524 | man = (man>>(32-9)); | |
525 | } | |
526 | break; | |
527 | } | |
528 | case ROUND_NEAREST: { | |
529 | /* check msb that we are discarding */ | |
530 | if (man & (1<<(32-9-1))) { | |
531 | man = (man>>(32-9)) + 1; | |
532 | if (man == (1<<9)) { | |
533 | /* no need to check for round up outside of range */ | |
534 | man = 0; | |
535 | exp += 1; | |
536 | } | |
537 | } else { | |
538 | man = (man>>(32-9)); | |
539 | } | |
540 | break; | |
541 | } | |
542 | } | |
543 | ||
544 | } else { | |
545 | /* zero rate - not representable */ | |
546 | ||
547 | if (r == ROUND_DOWN) { | |
548 | return -EINVAL; | |
549 | } else { | |
550 | exp = 0; | |
551 | man = 0; | |
552 | } | |
553 | } | |
554 | ||
555 | fs_dprintk (FS_DEBUG_QOS, "rate: man=%u, exp=%hu", man, exp); | |
556 | ||
557 | if (bits) | |
558 | *bits = /* (1<<14) | */ (exp<<9) | man; | |
559 | ||
560 | if (actual) | |
561 | *actual = (exp >= 9) | |
562 | ? (1 << exp) + (man << (exp-9)) | |
563 | : (1 << exp) + ((man + (1<<(9-exp-1))) >> (9-exp)); | |
564 | ||
565 | return 0; | |
566 | } | |
567 | ||
568 | ||
569 | ||
570 | ||
571 | /* FireStream access routines */ | |
572 | /* For DEEP-DOWN debugging these can be rigged to intercept accesses to | |
573 | certain registers or to just log all accesses. */ | |
574 | ||
575 | static inline void write_fs (struct fs_dev *dev, int offset, u32 val) | |
576 | { | |
577 | writel (val, dev->base + offset); | |
578 | } | |
579 | ||
580 | ||
581 | static inline u32 read_fs (struct fs_dev *dev, int offset) | |
582 | { | |
583 | return readl (dev->base + offset); | |
584 | } | |
585 | ||
586 | ||
587 | ||
588 | static inline struct FS_QENTRY *get_qentry (struct fs_dev *dev, struct queue *q) | |
589 | { | |
590 | return bus_to_virt (read_fs (dev, Q_WP(q->offset)) & Q_ADDR_MASK); | |
591 | } | |
592 | ||
593 | ||
594 | static void submit_qentry (struct fs_dev *dev, struct queue *q, struct FS_QENTRY *qe) | |
595 | { | |
596 | u32 wp; | |
597 | struct FS_QENTRY *cqe; | |
598 | ||
599 | /* XXX Sanity check: the write pointer can be checked to be | |
600 | still the same as the value passed as qe... -- REW */ | |
601 | /* udelay (5); */ | |
602 | while ((wp = read_fs (dev, Q_WP (q->offset))) & Q_FULL) { | |
603 | fs_dprintk (FS_DEBUG_TXQ, "Found queue at %x full. Waiting.\n", | |
604 | q->offset); | |
605 | schedule (); | |
606 | } | |
607 | ||
608 | wp &= ~0xf; | |
609 | cqe = bus_to_virt (wp); | |
610 | if (qe != cqe) { | |
611 | fs_dprintk (FS_DEBUG_TXQ, "q mismatch! %p %p\n", qe, cqe); | |
612 | } | |
613 | ||
614 | write_fs (dev, Q_WP(q->offset), Q_INCWRAP); | |
615 | ||
616 | { | |
617 | static int c; | |
618 | if (!(c++ % 100)) | |
619 | { | |
620 | int rp, wp; | |
621 | rp = read_fs (dev, Q_RP(q->offset)); | |
622 | wp = read_fs (dev, Q_WP(q->offset)); | |
623 | fs_dprintk (FS_DEBUG_TXQ, "q at %d: %x-%x: %x entries.\n", | |
624 | q->offset, rp, wp, wp-rp); | |
625 | } | |
626 | } | |
627 | } | |
628 | ||
629 | #ifdef DEBUG_EXTRA | |
630 | static struct FS_QENTRY pq[60]; | |
631 | static int qp; | |
632 | ||
633 | static struct FS_BPENTRY dq[60]; | |
634 | static int qd; | |
635 | static void *da[60]; | |
636 | #endif | |
637 | ||
638 | static void submit_queue (struct fs_dev *dev, struct queue *q, | |
639 | u32 cmd, u32 p1, u32 p2, u32 p3) | |
640 | { | |
641 | struct FS_QENTRY *qe; | |
642 | ||
643 | qe = get_qentry (dev, q); | |
644 | qe->cmd = cmd; | |
645 | qe->p0 = p1; | |
646 | qe->p1 = p2; | |
647 | qe->p2 = p3; | |
648 | submit_qentry (dev, q, qe); | |
649 | ||
650 | #ifdef DEBUG_EXTRA | |
651 | pq[qp].cmd = cmd; | |
652 | pq[qp].p0 = p1; | |
653 | pq[qp].p1 = p2; | |
654 | pq[qp].p2 = p3; | |
655 | qp++; | |
656 | if (qp >= 60) qp = 0; | |
657 | #endif | |
658 | } | |
659 | ||
660 | /* Test the "other" way one day... -- REW */ | |
661 | #if 1 | |
662 | #define submit_command submit_queue | |
663 | #else | |
664 | ||
665 | static void submit_command (struct fs_dev *dev, struct queue *q, | |
666 | u32 cmd, u32 p1, u32 p2, u32 p3) | |
667 | { | |
668 | write_fs (dev, CMDR0, cmd); | |
669 | write_fs (dev, CMDR1, p1); | |
670 | write_fs (dev, CMDR2, p2); | |
671 | write_fs (dev, CMDR3, p3); | |
672 | } | |
673 | #endif | |
674 | ||
675 | ||
676 | ||
677 | static void process_return_queue (struct fs_dev *dev, struct queue *q) | |
678 | { | |
679 | long rq; | |
680 | struct FS_QENTRY *qe; | |
681 | void *tc; | |
682 | ||
683 | while (!((rq = read_fs (dev, Q_RP(q->offset))) & Q_EMPTY)) { | |
684 | fs_dprintk (FS_DEBUG_QUEUE, "reaping return queue entry at %lx\n", rq); | |
685 | qe = bus_to_virt (rq); | |
686 | ||
687 | fs_dprintk (FS_DEBUG_QUEUE, "queue entry: %08x %08x %08x %08x. (%d)\n", | |
688 | qe->cmd, qe->p0, qe->p1, qe->p2, STATUS_CODE (qe)); | |
689 | ||
690 | switch (STATUS_CODE (qe)) { | |
691 | case 5: | |
692 | tc = bus_to_virt (qe->p0); | |
693 | fs_dprintk (FS_DEBUG_ALLOC, "Free tc: %p\n", tc); | |
694 | kfree (tc); | |
695 | break; | |
696 | } | |
697 | ||
698 | write_fs (dev, Q_RP(q->offset), Q_INCWRAP); | |
699 | } | |
700 | } | |
701 | ||
702 | ||
703 | static void process_txdone_queue (struct fs_dev *dev, struct queue *q) | |
704 | { | |
705 | long rq; | |
706 | long tmp; | |
707 | struct FS_QENTRY *qe; | |
708 | struct sk_buff *skb; | |
709 | struct FS_BPENTRY *td; | |
710 | ||
711 | while (!((rq = read_fs (dev, Q_RP(q->offset))) & Q_EMPTY)) { | |
712 | fs_dprintk (FS_DEBUG_QUEUE, "reaping txdone entry at %lx\n", rq); | |
713 | qe = bus_to_virt (rq); | |
714 | ||
715 | fs_dprintk (FS_DEBUG_QUEUE, "queue entry: %08x %08x %08x %08x: %d\n", | |
716 | qe->cmd, qe->p0, qe->p1, qe->p2, STATUS_CODE (qe)); | |
717 | ||
718 | if (STATUS_CODE (qe) != 2) | |
719 | fs_dprintk (FS_DEBUG_TXMEM, "queue entry: %08x %08x %08x %08x: %d\n", | |
720 | qe->cmd, qe->p0, qe->p1, qe->p2, STATUS_CODE (qe)); | |
721 | ||
722 | ||
723 | switch (STATUS_CODE (qe)) { | |
724 | case 0x01: /* This is for AAL0 where we put the chip in streaming mode */ | |
725 | /* Fall through */ | |
726 | case 0x02: | |
727 | /* Process a real txdone entry. */ | |
728 | tmp = qe->p0; | |
729 | if (tmp & 0x0f) | |
730 | printk (KERN_WARNING "td not aligned: %ld\n", tmp); | |
731 | tmp &= ~0x0f; | |
732 | td = bus_to_virt (tmp); | |
733 | ||
734 | fs_dprintk (FS_DEBUG_QUEUE, "Pool entry: %08x %08x %08x %08x %p.\n", | |
735 | td->flags, td->next, td->bsa, td->aal_bufsize, td->skb ); | |
736 | ||
737 | skb = td->skb; | |
738 | if (skb == FS_VCC (ATM_SKB(skb)->vcc)->last_skb) { | |
1da177e4 | 739 | FS_VCC (ATM_SKB(skb)->vcc)->last_skb = NULL; |
c73b1f6a | 740 | wake_up_interruptible (& FS_VCC (ATM_SKB(skb)->vcc)->close_wait); |
1da177e4 LT |
741 | } |
742 | td->dev->ntxpckts--; | |
743 | ||
744 | { | |
745 | static int c=0; | |
746 | ||
747 | if (!(c++ % 100)) { | |
748 | fs_dprintk (FS_DEBUG_QSIZE, "[%d]", td->dev->ntxpckts); | |
749 | } | |
750 | } | |
751 | ||
752 | atomic_inc(&ATM_SKB(skb)->vcc->stats->tx); | |
753 | ||
754 | fs_dprintk (FS_DEBUG_TXMEM, "i"); | |
755 | fs_dprintk (FS_DEBUG_ALLOC, "Free t-skb: %p\n", skb); | |
756 | fs_kfree_skb (skb); | |
757 | ||
758 | fs_dprintk (FS_DEBUG_ALLOC, "Free trans-d: %p\n", td); | |
b3c681e0 | 759 | memset (td, ATM_POISON_FREE, sizeof(struct FS_BPENTRY)); |
1da177e4 LT |
760 | kfree (td); |
761 | break; | |
762 | default: | |
763 | /* Here we get the tx purge inhibit command ... */ | |
764 | /* Action, I believe, is "don't do anything". -- REW */ | |
765 | ; | |
766 | } | |
767 | ||
768 | write_fs (dev, Q_RP(q->offset), Q_INCWRAP); | |
769 | } | |
770 | } | |
771 | ||
772 | ||
773 | static void process_incoming (struct fs_dev *dev, struct queue *q) | |
774 | { | |
775 | long rq; | |
776 | struct FS_QENTRY *qe; | |
777 | struct FS_BPENTRY *pe; | |
778 | struct sk_buff *skb; | |
779 | unsigned int channo; | |
780 | struct atm_vcc *atm_vcc; | |
781 | ||
782 | while (!((rq = read_fs (dev, Q_RP(q->offset))) & Q_EMPTY)) { | |
783 | fs_dprintk (FS_DEBUG_QUEUE, "reaping incoming queue entry at %lx\n", rq); | |
784 | qe = bus_to_virt (rq); | |
785 | ||
786 | fs_dprintk (FS_DEBUG_QUEUE, "queue entry: %08x %08x %08x %08x. ", | |
787 | qe->cmd, qe->p0, qe->p1, qe->p2); | |
788 | ||
789 | fs_dprintk (FS_DEBUG_QUEUE, "-> %x: %s\n", | |
790 | STATUS_CODE (qe), | |
791 | res_strings[STATUS_CODE(qe)]); | |
792 | ||
793 | pe = bus_to_virt (qe->p0); | |
794 | fs_dprintk (FS_DEBUG_QUEUE, "Pool entry: %08x %08x %08x %08x %p %p.\n", | |
795 | pe->flags, pe->next, pe->bsa, pe->aal_bufsize, | |
796 | pe->skb, pe->fp); | |
797 | ||
798 | channo = qe->cmd & 0xffff; | |
799 | ||
800 | if (channo < dev->nchannels) | |
801 | atm_vcc = dev->atm_vccs[channo]; | |
802 | else | |
803 | atm_vcc = NULL; | |
804 | ||
805 | /* Single buffer packet */ | |
806 | switch (STATUS_CODE (qe)) { | |
807 | case 0x1: | |
808 | /* Fall through for streaming mode */ | |
809 | case 0x2:/* Packet received OK.... */ | |
810 | if (atm_vcc) { | |
811 | skb = pe->skb; | |
812 | pe->fp->n--; | |
813 | #if 0 | |
814 | fs_dprintk (FS_DEBUG_QUEUE, "Got skb: %p\n", skb); | |
815 | if (FS_DEBUG_QUEUE & fs_debug) my_hd (bus_to_virt (pe->bsa), 0x20); | |
816 | #endif | |
817 | skb_put (skb, qe->p1 & 0xffff); | |
818 | ATM_SKB(skb)->vcc = atm_vcc; | |
819 | atomic_inc(&atm_vcc->stats->rx); | |
a61bbcf2 | 820 | __net_timestamp(skb); |
1da177e4 LT |
821 | fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p (pushed)\n", skb); |
822 | atm_vcc->push (atm_vcc, skb); | |
823 | fs_dprintk (FS_DEBUG_ALLOC, "Free rec-d: %p\n", pe); | |
824 | kfree (pe); | |
825 | } else { | |
826 | printk (KERN_ERR "Got a receive on a non-open channel %d.\n", channo); | |
827 | } | |
828 | break; | |
829 | case 0x17:/* AAL 5 CRC32 error. IFF the length field is nonzero, a buffer | |
830 | has been consumed and needs to be processed. -- REW */ | |
831 | if (qe->p1 & 0xffff) { | |
832 | pe = bus_to_virt (qe->p0); | |
833 | pe->fp->n--; | |
834 | fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p\n", pe->skb); | |
835 | dev_kfree_skb_any (pe->skb); | |
836 | fs_dprintk (FS_DEBUG_ALLOC, "Free rec-d: %p\n", pe); | |
837 | kfree (pe); | |
838 | } | |
839 | if (atm_vcc) | |
840 | atomic_inc(&atm_vcc->stats->rx_drop); | |
841 | break; | |
842 | case 0x1f: /* Reassembly abort: no buffers. */ | |
843 | /* Silently increment error counter. */ | |
844 | if (atm_vcc) | |
845 | atomic_inc(&atm_vcc->stats->rx_drop); | |
846 | break; | |
847 | default: /* Hmm. Haven't written the code to handle the others yet... -- REW */ | |
848 | printk (KERN_WARNING "Don't know what to do with RX status %x: %s.\n", | |
849 | STATUS_CODE(qe), res_strings[STATUS_CODE (qe)]); | |
850 | } | |
851 | write_fs (dev, Q_RP(q->offset), Q_INCWRAP); | |
852 | } | |
853 | } | |
854 | ||
855 | ||
856 | ||
857 | #define DO_DIRECTION(tp) ((tp)->traffic_class != ATM_NONE) | |
858 | ||
859 | static int fs_open(struct atm_vcc *atm_vcc) | |
860 | { | |
861 | struct fs_dev *dev; | |
862 | struct fs_vcc *vcc; | |
863 | struct fs_transmit_config *tc; | |
864 | struct atm_trafprm * txtp; | |
865 | struct atm_trafprm * rxtp; | |
866 | /* struct fs_receive_config *rc;*/ | |
867 | /* struct FS_QENTRY *qe; */ | |
868 | int error; | |
869 | int bfp; | |
870 | int to; | |
871 | unsigned short tmc0; | |
872 | short vpi = atm_vcc->vpi; | |
873 | int vci = atm_vcc->vci; | |
874 | ||
875 | func_enter (); | |
876 | ||
877 | dev = FS_DEV(atm_vcc->dev); | |
878 | fs_dprintk (FS_DEBUG_OPEN, "fs: open on dev: %p, vcc at %p\n", | |
879 | dev, atm_vcc); | |
880 | ||
881 | if (vci != ATM_VPI_UNSPEC && vpi != ATM_VCI_UNSPEC) | |
882 | set_bit(ATM_VF_ADDR, &atm_vcc->flags); | |
883 | ||
884 | if ((atm_vcc->qos.aal != ATM_AAL5) && | |
885 | (atm_vcc->qos.aal != ATM_AAL2)) | |
886 | return -EINVAL; /* XXX AAL0 */ | |
887 | ||
888 | fs_dprintk (FS_DEBUG_OPEN, "fs: (itf %d): open %d.%d\n", | |
889 | atm_vcc->dev->number, atm_vcc->vpi, atm_vcc->vci); | |
890 | ||
891 | /* XXX handle qos parameters (rate limiting) ? */ | |
892 | ||
893 | vcc = kmalloc(sizeof(struct fs_vcc), GFP_KERNEL); | |
894 | fs_dprintk (FS_DEBUG_ALLOC, "Alloc VCC: %p(%Zd)\n", vcc, sizeof(struct fs_vcc)); | |
895 | if (!vcc) { | |
896 | clear_bit(ATM_VF_ADDR, &atm_vcc->flags); | |
897 | return -ENOMEM; | |
898 | } | |
899 | ||
900 | atm_vcc->dev_data = vcc; | |
901 | vcc->last_skb = NULL; | |
902 | ||
903 | init_waitqueue_head (&vcc->close_wait); | |
904 | ||
905 | txtp = &atm_vcc->qos.txtp; | |
906 | rxtp = &atm_vcc->qos.rxtp; | |
907 | ||
908 | if (!test_bit(ATM_VF_PARTIAL, &atm_vcc->flags)) { | |
909 | if (IS_FS50(dev)) { | |
910 | /* Increment the channel numer: take a free one next time. */ | |
911 | for (to=33;to;to--, dev->channo++) { | |
912 | /* We only have 32 channels */ | |
913 | if (dev->channo >= 32) | |
914 | dev->channo = 0; | |
915 | /* If we need to do RX, AND the RX is inuse, try the next */ | |
916 | if (DO_DIRECTION(rxtp) && dev->atm_vccs[dev->channo]) | |
917 | continue; | |
918 | /* If we need to do TX, AND the TX is inuse, try the next */ | |
919 | if (DO_DIRECTION(txtp) && test_bit (dev->channo, dev->tx_inuse)) | |
920 | continue; | |
921 | /* Ok, both are free! (or not needed) */ | |
922 | break; | |
923 | } | |
924 | if (!to) { | |
925 | printk ("No more free channels for FS50..\n"); | |
926 | return -EBUSY; | |
927 | } | |
928 | vcc->channo = dev->channo; | |
929 | dev->channo &= dev->channel_mask; | |
930 | ||
931 | } else { | |
932 | vcc->channo = (vpi << FS155_VCI_BITS) | (vci); | |
933 | if (((DO_DIRECTION(rxtp) && dev->atm_vccs[vcc->channo])) || | |
934 | ( DO_DIRECTION(txtp) && test_bit (vcc->channo, dev->tx_inuse))) { | |
935 | printk ("Channel is in use for FS155.\n"); | |
936 | return -EBUSY; | |
937 | } | |
938 | } | |
939 | fs_dprintk (FS_DEBUG_OPEN, "OK. Allocated channel %x(%d).\n", | |
940 | vcc->channo, vcc->channo); | |
941 | } | |
942 | ||
943 | if (DO_DIRECTION (txtp)) { | |
944 | tc = kmalloc (sizeof (struct fs_transmit_config), GFP_KERNEL); | |
945 | fs_dprintk (FS_DEBUG_ALLOC, "Alloc tc: %p(%Zd)\n", | |
946 | tc, sizeof (struct fs_transmit_config)); | |
947 | if (!tc) { | |
948 | fs_dprintk (FS_DEBUG_OPEN, "fs: can't alloc transmit_config.\n"); | |
949 | return -ENOMEM; | |
950 | } | |
951 | ||
952 | /* Allocate the "open" entry from the high priority txq. This makes | |
953 | it most likely that the chip will notice it. It also prevents us | |
954 | from having to wait for completion. On the other hand, we may | |
955 | need to wait for completion anyway, to see if it completed | |
d6e05edc | 956 | successfully. */ |
1da177e4 LT |
957 | |
958 | switch (atm_vcc->qos.aal) { | |
959 | case ATM_AAL2: | |
960 | case ATM_AAL0: | |
961 | tc->flags = 0 | |
962 | | TC_FLAGS_TRANSPARENT_PAYLOAD | |
963 | | TC_FLAGS_PACKET | |
964 | | (1 << 28) | |
965 | | TC_FLAGS_TYPE_UBR /* XXX Change to VBR -- PVDL */ | |
966 | | TC_FLAGS_CAL0; | |
967 | break; | |
968 | case ATM_AAL5: | |
969 | tc->flags = 0 | |
970 | | TC_FLAGS_AAL5 | |
971 | | TC_FLAGS_PACKET /* ??? */ | |
972 | | TC_FLAGS_TYPE_CBR | |
973 | | TC_FLAGS_CAL0; | |
974 | break; | |
975 | default: | |
976 | printk ("Unknown aal: %d\n", atm_vcc->qos.aal); | |
977 | tc->flags = 0; | |
978 | } | |
979 | /* Docs are vague about this atm_hdr field. By the way, the FS | |
980 | * chip makes odd errors if lower bits are set.... -- REW */ | |
981 | tc->atm_hdr = (vpi << 20) | (vci << 4); | |
d41a95e0 | 982 | tmc0 = 0; |
1da177e4 LT |
983 | { |
984 | int pcr = atm_pcr_goal (txtp); | |
985 | ||
986 | fs_dprintk (FS_DEBUG_OPEN, "pcr = %d.\n", pcr); | |
987 | ||
988 | /* XXX Hmm. officially we're only allowed to do this if rounding | |
989 | is round_down -- REW */ | |
990 | if (IS_FS50(dev)) { | |
991 | if (pcr > 51840000/53/8) pcr = 51840000/53/8; | |
992 | } else { | |
993 | if (pcr > 155520000/53/8) pcr = 155520000/53/8; | |
994 | } | |
995 | if (!pcr) { | |
996 | /* no rate cap */ | |
997 | tmc0 = IS_FS50(dev)?0x61BE:0x64c9; /* Just copied over the bits from Fujitsu -- REW */ | |
998 | } else { | |
999 | int r; | |
1000 | if (pcr < 0) { | |
1001 | r = ROUND_DOWN; | |
1002 | pcr = -pcr; | |
1003 | } else { | |
1004 | r = ROUND_UP; | |
1005 | } | |
1006 | error = make_rate (pcr, r, &tmc0, NULL); | |
663bab6f JG |
1007 | if (error) { |
1008 | kfree(tc); | |
1009 | return error; | |
1010 | } | |
1da177e4 LT |
1011 | } |
1012 | fs_dprintk (FS_DEBUG_OPEN, "pcr = %d.\n", pcr); | |
1013 | } | |
1014 | ||
1015 | tc->TMC[0] = tmc0 | 0x4000; | |
1016 | tc->TMC[1] = 0; /* Unused */ | |
1017 | tc->TMC[2] = 0; /* Unused */ | |
1018 | tc->TMC[3] = 0; /* Unused */ | |
1019 | ||
1020 | tc->spec = 0; /* UTOPIA address, UDF, HEC: Unused -> 0 */ | |
1021 | tc->rtag[0] = 0; /* What should I do with routing tags??? | |
1022 | -- Not used -- AS -- Thanks -- REW*/ | |
1023 | tc->rtag[1] = 0; | |
1024 | tc->rtag[2] = 0; | |
1025 | ||
1026 | if (fs_debug & FS_DEBUG_OPEN) { | |
1027 | fs_dprintk (FS_DEBUG_OPEN, "TX config record:\n"); | |
1028 | my_hd (tc, sizeof (*tc)); | |
1029 | } | |
1030 | ||
1031 | /* We now use the "submit_command" function to submit commands to | |
1032 | the firestream. There is a define up near the definition of | |
1033 | that routine that switches this routine between immediate write | |
8e572bab | 1034 | to the immediate command registers and queuing the commands in |
1da177e4 LT |
1035 | the HPTXQ for execution. This last technique might be more |
1036 | efficient if we know we're going to submit a whole lot of | |
1037 | commands in one go, but this driver is not setup to be able to | |
1038 | use such a construct. So it probably doen't matter much right | |
1039 | now. -- REW */ | |
1040 | ||
1041 | /* The command is IMMediate and INQueue. The parameters are out-of-line.. */ | |
1042 | submit_command (dev, &dev->hp_txq, | |
1043 | QE_CMD_CONFIG_TX | QE_CMD_IMM_INQ | vcc->channo, | |
1044 | virt_to_bus (tc), 0, 0); | |
1045 | ||
1046 | submit_command (dev, &dev->hp_txq, | |
1047 | QE_CMD_TX_EN | QE_CMD_IMM_INQ | vcc->channo, | |
1048 | 0, 0, 0); | |
1049 | set_bit (vcc->channo, dev->tx_inuse); | |
1050 | } | |
1051 | ||
1052 | if (DO_DIRECTION (rxtp)) { | |
1053 | dev->atm_vccs[vcc->channo] = atm_vcc; | |
1054 | ||
1055 | for (bfp = 0;bfp < FS_NR_FREE_POOLS; bfp++) | |
1056 | if (atm_vcc->qos.rxtp.max_sdu <= dev->rx_fp[bfp].bufsize) break; | |
1057 | if (bfp >= FS_NR_FREE_POOLS) { | |
1058 | fs_dprintk (FS_DEBUG_OPEN, "No free pool fits sdu: %d.\n", | |
1059 | atm_vcc->qos.rxtp.max_sdu); | |
1060 | /* XXX Cleanup? -- Would just calling fs_close work??? -- REW */ | |
1061 | ||
1062 | /* XXX clear tx inuse. Close TX part? */ | |
1063 | dev->atm_vccs[vcc->channo] = NULL; | |
1064 | kfree (vcc); | |
1065 | return -EINVAL; | |
1066 | } | |
1067 | ||
1068 | switch (atm_vcc->qos.aal) { | |
1069 | case ATM_AAL0: | |
1070 | case ATM_AAL2: | |
1071 | submit_command (dev, &dev->hp_txq, | |
1072 | QE_CMD_CONFIG_RX | QE_CMD_IMM_INQ | vcc->channo, | |
1073 | RC_FLAGS_TRANSP | | |
1074 | RC_FLAGS_BFPS_BFP * bfp | | |
1075 | RC_FLAGS_RXBM_PSB, 0, 0); | |
1076 | break; | |
1077 | case ATM_AAL5: | |
1078 | submit_command (dev, &dev->hp_txq, | |
1079 | QE_CMD_CONFIG_RX | QE_CMD_IMM_INQ | vcc->channo, | |
1080 | RC_FLAGS_AAL5 | | |
1081 | RC_FLAGS_BFPS_BFP * bfp | | |
1082 | RC_FLAGS_RXBM_PSB, 0, 0); | |
1083 | break; | |
1084 | }; | |
1085 | if (IS_FS50 (dev)) { | |
1086 | submit_command (dev, &dev->hp_txq, | |
1087 | QE_CMD_REG_WR | QE_CMD_IMM_INQ, | |
1088 | 0x80 + vcc->channo, | |
1089 | (vpi << 16) | vci, 0 ); /* XXX -- Use defines. */ | |
1090 | } | |
1091 | submit_command (dev, &dev->hp_txq, | |
1092 | QE_CMD_RX_EN | QE_CMD_IMM_INQ | vcc->channo, | |
1093 | 0, 0, 0); | |
1094 | } | |
1095 | ||
1096 | /* Indicate we're done! */ | |
1097 | set_bit(ATM_VF_READY, &atm_vcc->flags); | |
1098 | ||
1099 | func_exit (); | |
1100 | return 0; | |
1101 | } | |
1102 | ||
1103 | ||
1104 | static void fs_close(struct atm_vcc *atm_vcc) | |
1105 | { | |
1106 | struct fs_dev *dev = FS_DEV (atm_vcc->dev); | |
1107 | struct fs_vcc *vcc = FS_VCC (atm_vcc); | |
1108 | struct atm_trafprm * txtp; | |
1109 | struct atm_trafprm * rxtp; | |
1110 | ||
1111 | func_enter (); | |
1112 | ||
1113 | clear_bit(ATM_VF_READY, &atm_vcc->flags); | |
1114 | ||
1115 | fs_dprintk (FS_DEBUG_QSIZE, "--==**[%d]**==--", dev->ntxpckts); | |
1116 | if (vcc->last_skb) { | |
1117 | fs_dprintk (FS_DEBUG_QUEUE, "Waiting for skb %p to be sent.\n", | |
1118 | vcc->last_skb); | |
1119 | /* We're going to wait for the last packet to get sent on this VC. It would | |
1120 | be impolite not to send them don't you think? | |
1121 | XXX | |
1122 | We don't know which packets didn't get sent. So if we get interrupted in | |
1123 | this sleep_on, we'll lose any reference to these packets. Memory leak! | |
1124 | On the other hand, it's awfully convenient that we can abort a "close" that | |
1125 | is taking too long. Maybe just use non-interruptible sleep on? -- REW */ | |
c73b1f6a | 1126 | wait_event_interruptible(vcc->close_wait, !vcc->last_skb); |
1da177e4 LT |
1127 | } |
1128 | ||
1129 | txtp = &atm_vcc->qos.txtp; | |
1130 | rxtp = &atm_vcc->qos.rxtp; | |
1131 | ||
1132 | ||
1133 | /* See App note XXX (Unpublished as of now) for the reason for the | |
1134 | removal of the "CMD_IMM_INQ" part of the TX_PURGE_INH... -- REW */ | |
1135 | ||
1136 | if (DO_DIRECTION (txtp)) { | |
1137 | submit_command (dev, &dev->hp_txq, | |
1138 | QE_CMD_TX_PURGE_INH | /*QE_CMD_IMM_INQ|*/ vcc->channo, 0,0,0); | |
1139 | clear_bit (vcc->channo, dev->tx_inuse); | |
1140 | } | |
1141 | ||
1142 | if (DO_DIRECTION (rxtp)) { | |
1143 | submit_command (dev, &dev->hp_txq, | |
1144 | QE_CMD_RX_PURGE_INH | QE_CMD_IMM_INQ | vcc->channo, 0,0,0); | |
1145 | dev->atm_vccs [vcc->channo] = NULL; | |
1146 | ||
1147 | /* This means that this is configured as a receive channel */ | |
1148 | if (IS_FS50 (dev)) { | |
1149 | /* Disable the receive filter. Is 0/0 indeed an invalid receive | |
1150 | channel? -- REW. Yes it is. -- Hang. Ok. I'll use -1 | |
1151 | (0xfff...) -- REW */ | |
1152 | submit_command (dev, &dev->hp_txq, | |
1153 | QE_CMD_REG_WR | QE_CMD_IMM_INQ, | |
1154 | 0x80 + vcc->channo, -1, 0 ); | |
1155 | } | |
1156 | } | |
1157 | ||
1158 | fs_dprintk (FS_DEBUG_ALLOC, "Free vcc: %p\n", vcc); | |
1159 | kfree (vcc); | |
1160 | ||
1161 | func_exit (); | |
1162 | } | |
1163 | ||
1164 | ||
1165 | static int fs_send (struct atm_vcc *atm_vcc, struct sk_buff *skb) | |
1166 | { | |
1167 | struct fs_dev *dev = FS_DEV (atm_vcc->dev); | |
1168 | struct fs_vcc *vcc = FS_VCC (atm_vcc); | |
1169 | struct FS_BPENTRY *td; | |
1170 | ||
1171 | func_enter (); | |
1172 | ||
1173 | fs_dprintk (FS_DEBUG_TXMEM, "I"); | |
1174 | fs_dprintk (FS_DEBUG_SEND, "Send: atm_vcc %p skb %p vcc %p dev %p\n", | |
1175 | atm_vcc, skb, vcc, dev); | |
1176 | ||
1177 | fs_dprintk (FS_DEBUG_ALLOC, "Alloc t-skb: %p (atm_send)\n", skb); | |
1178 | ||
1179 | ATM_SKB(skb)->vcc = atm_vcc; | |
1180 | ||
1181 | vcc->last_skb = skb; | |
1182 | ||
1183 | td = kmalloc (sizeof (struct FS_BPENTRY), GFP_ATOMIC); | |
1184 | fs_dprintk (FS_DEBUG_ALLOC, "Alloc transd: %p(%Zd)\n", td, sizeof (struct FS_BPENTRY)); | |
1185 | if (!td) { | |
1186 | /* Oops out of mem */ | |
1187 | return -ENOMEM; | |
1188 | } | |
1189 | ||
1190 | fs_dprintk (FS_DEBUG_SEND, "first word in buffer: %x\n", | |
1191 | *(int *) skb->data); | |
1192 | ||
1193 | td->flags = TD_EPI | TD_DATA | skb->len; | |
1194 | td->next = 0; | |
1195 | td->bsa = virt_to_bus (skb->data); | |
1196 | td->skb = skb; | |
1197 | td->dev = dev; | |
1198 | dev->ntxpckts++; | |
1199 | ||
1200 | #ifdef DEBUG_EXTRA | |
1201 | da[qd] = td; | |
1202 | dq[qd].flags = td->flags; | |
1203 | dq[qd].next = td->next; | |
1204 | dq[qd].bsa = td->bsa; | |
1205 | dq[qd].skb = td->skb; | |
1206 | dq[qd].dev = td->dev; | |
1207 | qd++; | |
1208 | if (qd >= 60) qd = 0; | |
1209 | #endif | |
1210 | ||
1211 | submit_queue (dev, &dev->hp_txq, | |
1212 | QE_TRANSMIT_DE | vcc->channo, | |
1213 | virt_to_bus (td), 0, | |
1214 | virt_to_bus (td)); | |
1215 | ||
1216 | fs_dprintk (FS_DEBUG_QUEUE, "in send: txq %d txrq %d\n", | |
1217 | read_fs (dev, Q_EA (dev->hp_txq.offset)) - | |
1218 | read_fs (dev, Q_SA (dev->hp_txq.offset)), | |
1219 | read_fs (dev, Q_EA (dev->tx_relq.offset)) - | |
1220 | read_fs (dev, Q_SA (dev->tx_relq.offset))); | |
1221 | ||
1222 | func_exit (); | |
1223 | return 0; | |
1224 | } | |
1225 | ||
1226 | ||
1227 | /* Some function placeholders for functions we don't yet support. */ | |
1228 | ||
1229 | #if 0 | |
1230 | static int fs_ioctl(struct atm_dev *dev,unsigned int cmd,void __user *arg) | |
1231 | { | |
1232 | func_enter (); | |
1233 | func_exit (); | |
1234 | return -ENOIOCTLCMD; | |
1235 | } | |
1236 | ||
1237 | ||
1238 | static int fs_getsockopt(struct atm_vcc *vcc,int level,int optname, | |
1239 | void __user *optval,int optlen) | |
1240 | { | |
1241 | func_enter (); | |
1242 | func_exit (); | |
1243 | return 0; | |
1244 | } | |
1245 | ||
1246 | ||
1247 | static int fs_setsockopt(struct atm_vcc *vcc,int level,int optname, | |
b7058842 | 1248 | void __user *optval,unsigned int optlen) |
1da177e4 LT |
1249 | { |
1250 | func_enter (); | |
1251 | func_exit (); | |
1252 | return 0; | |
1253 | } | |
1254 | ||
1255 | ||
1256 | static void fs_phy_put(struct atm_dev *dev,unsigned char value, | |
1257 | unsigned long addr) | |
1258 | { | |
1259 | func_enter (); | |
1260 | func_exit (); | |
1261 | } | |
1262 | ||
1263 | ||
1264 | static unsigned char fs_phy_get(struct atm_dev *dev,unsigned long addr) | |
1265 | { | |
1266 | func_enter (); | |
1267 | func_exit (); | |
1268 | return 0; | |
1269 | } | |
1270 | ||
1271 | ||
1272 | static int fs_change_qos(struct atm_vcc *vcc,struct atm_qos *qos,int flags) | |
1273 | { | |
1274 | func_enter (); | |
1275 | func_exit (); | |
1276 | return 0; | |
1277 | }; | |
1278 | ||
1279 | #endif | |
1280 | ||
1281 | ||
1282 | static const struct atmdev_ops ops = { | |
1283 | .open = fs_open, | |
1284 | .close = fs_close, | |
1285 | .send = fs_send, | |
1286 | .owner = THIS_MODULE, | |
1287 | /* ioctl: fs_ioctl, */ | |
1288 | /* getsockopt: fs_getsockopt, */ | |
1289 | /* setsockopt: fs_setsockopt, */ | |
1290 | /* change_qos: fs_change_qos, */ | |
1291 | ||
1292 | /* For now implement these internally here... */ | |
1293 | /* phy_put: fs_phy_put, */ | |
1294 | /* phy_get: fs_phy_get, */ | |
1295 | }; | |
1296 | ||
1297 | ||
6c44512d | 1298 | static void undocumented_pci_fix(struct pci_dev *pdev) |
1da177e4 | 1299 | { |
b4482a4b | 1300 | u32 tint; |
1da177e4 LT |
1301 | |
1302 | /* The Windows driver says: */ | |
1303 | /* Switch off FireStream Retry Limit Threshold | |
1304 | */ | |
1305 | ||
1306 | /* The register at 0x28 is documented as "reserved", no further | |
1307 | comments. */ | |
1308 | ||
1309 | pci_read_config_dword (pdev, 0x28, &tint); | |
1310 | if (tint != 0x80) { | |
1311 | tint = 0x80; | |
1312 | pci_write_config_dword (pdev, 0x28, tint); | |
1313 | } | |
1314 | } | |
1315 | ||
1316 | ||
1317 | ||
1318 | /************************************************************************** | |
1319 | * PHY routines * | |
1320 | **************************************************************************/ | |
1321 | ||
6c44512d | 1322 | static void write_phy(struct fs_dev *dev, int regnum, int val) |
1da177e4 LT |
1323 | { |
1324 | submit_command (dev, &dev->hp_txq, QE_CMD_PRP_WR | QE_CMD_IMM_INQ, | |
1325 | regnum, val, 0); | |
1326 | } | |
1327 | ||
6c44512d | 1328 | static int init_phy(struct fs_dev *dev, struct reginit_item *reginit) |
1da177e4 LT |
1329 | { |
1330 | int i; | |
1331 | ||
1332 | func_enter (); | |
1333 | while (reginit->reg != PHY_EOF) { | |
1334 | if (reginit->reg == PHY_CLEARALL) { | |
1335 | /* "PHY_CLEARALL means clear all registers. Numregisters is in "val". */ | |
1336 | for (i=0;i<reginit->val;i++) { | |
1337 | write_phy (dev, i, 0); | |
1338 | } | |
1339 | } else { | |
1340 | write_phy (dev, reginit->reg, reginit->val); | |
1341 | } | |
1342 | reginit++; | |
1343 | } | |
1344 | func_exit (); | |
1345 | return 0; | |
1346 | } | |
1347 | ||
1348 | static void reset_chip (struct fs_dev *dev) | |
1349 | { | |
1350 | int i; | |
1351 | ||
1352 | write_fs (dev, SARMODE0, SARMODE0_SRTS0); | |
1353 | ||
1354 | /* Undocumented delay */ | |
1355 | udelay (128); | |
1356 | ||
1357 | /* The "internal registers are documented to all reset to zero, but | |
1358 | comments & code in the Windows driver indicates that the pools are | |
1359 | NOT reset. */ | |
1360 | for (i=0;i < FS_NR_FREE_POOLS;i++) { | |
1361 | write_fs (dev, FP_CNF (RXB_FP(i)), 0); | |
1362 | write_fs (dev, FP_SA (RXB_FP(i)), 0); | |
1363 | write_fs (dev, FP_EA (RXB_FP(i)), 0); | |
1364 | write_fs (dev, FP_CNT (RXB_FP(i)), 0); | |
1365 | write_fs (dev, FP_CTU (RXB_FP(i)), 0); | |
1366 | } | |
1367 | ||
1368 | /* The same goes for the match channel registers, although those are | |
1369 | NOT documented that way in the Windows driver. -- REW */ | |
1370 | /* The Windows driver DOES write 0 to these registers somewhere in | |
1371 | the init sequence. However, a small hardware-feature, will | |
1372 | prevent reception of data on VPI/VCI = 0/0 (Unless the channel | |
1373 | allocated happens to have no disabled channels that have a lower | |
1374 | number. -- REW */ | |
1375 | ||
1376 | /* Clear the match channel registers. */ | |
1377 | if (IS_FS50 (dev)) { | |
1378 | for (i=0;i<FS50_NR_CHANNELS;i++) { | |
1379 | write_fs (dev, 0x200 + i * 4, -1); | |
1380 | } | |
1381 | } | |
1382 | } | |
1383 | ||
6c44512d | 1384 | static void *aligned_kmalloc(int size, gfp_t flags, int alignment) |
1da177e4 LT |
1385 | { |
1386 | void *t; | |
1387 | ||
1388 | if (alignment <= 0x10) { | |
1389 | t = kmalloc (size, flags); | |
1390 | if ((unsigned long)t & (alignment-1)) { | |
1391 | printk ("Kmalloc doesn't align things correctly! %p\n", t); | |
1392 | kfree (t); | |
1393 | return aligned_kmalloc (size, flags, alignment * 4); | |
1394 | } | |
1395 | return t; | |
1396 | } | |
1397 | printk (KERN_ERR "Request for > 0x10 alignment not yet implemented (hard!)\n"); | |
1398 | return NULL; | |
1399 | } | |
1400 | ||
6c44512d GKH |
1401 | static int init_q(struct fs_dev *dev, struct queue *txq, int queue, |
1402 | int nentries, int is_rq) | |
1da177e4 LT |
1403 | { |
1404 | int sz = nentries * sizeof (struct FS_QENTRY); | |
1405 | struct FS_QENTRY *p; | |
1406 | ||
1407 | func_enter (); | |
1408 | ||
1409 | fs_dprintk (FS_DEBUG_INIT, "Inititing queue at %x: %d entries:\n", | |
1410 | queue, nentries); | |
1411 | ||
1412 | p = aligned_kmalloc (sz, GFP_KERNEL, 0x10); | |
1413 | fs_dprintk (FS_DEBUG_ALLOC, "Alloc queue: %p(%d)\n", p, sz); | |
1414 | ||
1415 | if (!p) return 0; | |
1416 | ||
1417 | write_fs (dev, Q_SA(queue), virt_to_bus(p)); | |
1418 | write_fs (dev, Q_EA(queue), virt_to_bus(p+nentries-1)); | |
1419 | write_fs (dev, Q_WP(queue), virt_to_bus(p)); | |
1420 | write_fs (dev, Q_RP(queue), virt_to_bus(p)); | |
1421 | if (is_rq) { | |
1422 | /* Configuration for the receive queue: 0: interrupt immediately, | |
1423 | no pre-warning to empty queues: We do our best to keep the | |
1424 | queue filled anyway. */ | |
1425 | write_fs (dev, Q_CNF(queue), 0 ); | |
1426 | } | |
1427 | ||
1428 | txq->sa = p; | |
1429 | txq->ea = p; | |
1430 | txq->offset = queue; | |
1431 | ||
1432 | func_exit (); | |
1433 | return 1; | |
1434 | } | |
1435 | ||
1436 | ||
6c44512d GKH |
1437 | static int init_fp(struct fs_dev *dev, struct freepool *fp, int queue, |
1438 | int bufsize, int nr_buffers) | |
1da177e4 LT |
1439 | { |
1440 | func_enter (); | |
1441 | ||
1442 | fs_dprintk (FS_DEBUG_INIT, "Inititing free pool at %x:\n", queue); | |
1443 | ||
1444 | write_fs (dev, FP_CNF(queue), (bufsize * RBFP_RBS) | RBFP_RBSVAL | RBFP_CME); | |
1445 | write_fs (dev, FP_SA(queue), 0); | |
1446 | write_fs (dev, FP_EA(queue), 0); | |
1447 | write_fs (dev, FP_CTU(queue), 0); | |
1448 | write_fs (dev, FP_CNT(queue), 0); | |
1449 | ||
1450 | fp->offset = queue; | |
1451 | fp->bufsize = bufsize; | |
1452 | fp->nr_buffers = nr_buffers; | |
1453 | ||
1454 | func_exit (); | |
1455 | return 1; | |
1456 | } | |
1457 | ||
1458 | ||
1459 | static inline int nr_buffers_in_freepool (struct fs_dev *dev, struct freepool *fp) | |
1460 | { | |
1461 | #if 0 | |
1462 | /* This seems to be unreliable.... */ | |
1463 | return read_fs (dev, FP_CNT (fp->offset)); | |
1464 | #else | |
1465 | return fp->n; | |
1466 | #endif | |
1467 | } | |
1468 | ||
1469 | ||
1470 | /* Check if this gets going again if a pool ever runs out. -- Yes, it | |
1471 | does. I've seen "receive abort: no buffers" and things started | |
1472 | working again after that... -- REW */ | |
1473 | ||
c9e42614 | 1474 | static void top_off_fp (struct fs_dev *dev, struct freepool *fp, |
dd0fc66f | 1475 | gfp_t gfp_flags) |
1da177e4 LT |
1476 | { |
1477 | struct FS_BPENTRY *qe, *ne; | |
1478 | struct sk_buff *skb; | |
1479 | int n = 0; | |
b206a65d | 1480 | u32 qe_tmp; |
1da177e4 LT |
1481 | |
1482 | fs_dprintk (FS_DEBUG_QUEUE, "Topping off queue at %x (%d-%d/%d)\n", | |
1483 | fp->offset, read_fs (dev, FP_CNT (fp->offset)), fp->n, | |
1484 | fp->nr_buffers); | |
1485 | while (nr_buffers_in_freepool(dev, fp) < fp->nr_buffers) { | |
1486 | ||
1487 | skb = alloc_skb (fp->bufsize, gfp_flags); | |
1488 | fs_dprintk (FS_DEBUG_ALLOC, "Alloc rec-skb: %p(%d)\n", skb, fp->bufsize); | |
1489 | if (!skb) break; | |
1490 | ne = kmalloc (sizeof (struct FS_BPENTRY), gfp_flags); | |
1491 | fs_dprintk (FS_DEBUG_ALLOC, "Alloc rec-d: %p(%Zd)\n", ne, sizeof (struct FS_BPENTRY)); | |
1492 | if (!ne) { | |
1493 | fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p\n", skb); | |
1494 | dev_kfree_skb_any (skb); | |
1495 | break; | |
1496 | } | |
1497 | ||
1498 | fs_dprintk (FS_DEBUG_QUEUE, "Adding skb %p desc %p -> %p(%p) ", | |
1499 | skb, ne, skb->data, skb->head); | |
1500 | n++; | |
1501 | ne->flags = FP_FLAGS_EPI | fp->bufsize; | |
1502 | ne->next = virt_to_bus (NULL); | |
1503 | ne->bsa = virt_to_bus (skb->data); | |
1504 | ne->aal_bufsize = fp->bufsize; | |
1505 | ne->skb = skb; | |
1506 | ne->fp = fp; | |
1507 | ||
b206a65d JG |
1508 | /* |
1509 | * FIXME: following code encodes and decodes | |
1510 | * machine pointers (could be 64-bit) into a | |
1511 | * 32-bit register. | |
1512 | */ | |
1513 | ||
1514 | qe_tmp = read_fs (dev, FP_EA(fp->offset)); | |
1515 | fs_dprintk (FS_DEBUG_QUEUE, "link at %x\n", qe_tmp); | |
1516 | if (qe_tmp) { | |
1517 | qe = bus_to_virt ((long) qe_tmp); | |
1da177e4 LT |
1518 | qe->next = virt_to_bus(ne); |
1519 | qe->flags &= ~FP_FLAGS_EPI; | |
1520 | } else | |
1521 | write_fs (dev, FP_SA(fp->offset), virt_to_bus(ne)); | |
1522 | ||
1523 | write_fs (dev, FP_EA(fp->offset), virt_to_bus (ne)); | |
1524 | fp->n++; /* XXX Atomic_inc? */ | |
1525 | write_fs (dev, FP_CTU(fp->offset), 1); | |
1526 | } | |
1527 | ||
1528 | fs_dprintk (FS_DEBUG_QUEUE, "Added %d entries. \n", n); | |
1529 | } | |
1530 | ||
6c44512d | 1531 | static void free_queue(struct fs_dev *dev, struct queue *txq) |
1da177e4 LT |
1532 | { |
1533 | func_enter (); | |
1534 | ||
1535 | write_fs (dev, Q_SA(txq->offset), 0); | |
1536 | write_fs (dev, Q_EA(txq->offset), 0); | |
1537 | write_fs (dev, Q_RP(txq->offset), 0); | |
1538 | write_fs (dev, Q_WP(txq->offset), 0); | |
1539 | /* Configuration ? */ | |
1540 | ||
1541 | fs_dprintk (FS_DEBUG_ALLOC, "Free queue: %p\n", txq->sa); | |
1542 | kfree (txq->sa); | |
1543 | ||
1544 | func_exit (); | |
1545 | } | |
1546 | ||
6c44512d | 1547 | static void free_freepool(struct fs_dev *dev, struct freepool *fp) |
1da177e4 LT |
1548 | { |
1549 | func_enter (); | |
1550 | ||
1551 | write_fs (dev, FP_CNF(fp->offset), 0); | |
1552 | write_fs (dev, FP_SA (fp->offset), 0); | |
1553 | write_fs (dev, FP_EA (fp->offset), 0); | |
1554 | write_fs (dev, FP_CNT(fp->offset), 0); | |
1555 | write_fs (dev, FP_CTU(fp->offset), 0); | |
1556 | ||
1557 | func_exit (); | |
1558 | } | |
1559 | ||
1560 | ||
1561 | ||
7d12e780 | 1562 | static irqreturn_t fs_irq (int irq, void *dev_id) |
1da177e4 LT |
1563 | { |
1564 | int i; | |
1565 | u32 status; | |
1566 | struct fs_dev *dev = dev_id; | |
1567 | ||
1568 | status = read_fs (dev, ISR); | |
1569 | if (!status) | |
1570 | return IRQ_NONE; | |
1571 | ||
1572 | func_enter (); | |
1573 | ||
1574 | #ifdef IRQ_RATE_LIMIT | |
1575 | /* Aaargh! I'm ashamed. This costs more lines-of-code than the actual | |
1576 | interrupt routine!. (Well, used to when I wrote that comment) -- REW */ | |
1577 | { | |
1578 | static int lastjif; | |
1579 | static int nintr=0; | |
1580 | ||
1581 | if (lastjif == jiffies) { | |
1582 | if (++nintr > IRQ_RATE_LIMIT) { | |
1583 | free_irq (dev->irq, dev_id); | |
1584 | printk (KERN_ERR "fs: Too many interrupts. Turning off interrupt %d.\n", | |
1585 | dev->irq); | |
1586 | } | |
1587 | } else { | |
1588 | lastjif = jiffies; | |
1589 | nintr = 0; | |
1590 | } | |
1591 | } | |
1592 | #endif | |
1593 | fs_dprintk (FS_DEBUG_QUEUE, "in intr: txq %d txrq %d\n", | |
1594 | read_fs (dev, Q_EA (dev->hp_txq.offset)) - | |
1595 | read_fs (dev, Q_SA (dev->hp_txq.offset)), | |
1596 | read_fs (dev, Q_EA (dev->tx_relq.offset)) - | |
1597 | read_fs (dev, Q_SA (dev->tx_relq.offset))); | |
1598 | ||
1599 | /* print the bits in the ISR register. */ | |
1600 | if (fs_debug & FS_DEBUG_IRQ) { | |
3a4fa0a2 | 1601 | /* The FS_DEBUG things are unnecessary here. But this way it is |
1da177e4 LT |
1602 | clear for grep that these are debug prints. */ |
1603 | fs_dprintk (FS_DEBUG_IRQ, "IRQ status:"); | |
1604 | for (i=0;i<27;i++) | |
1605 | if (status & (1 << i)) | |
1606 | fs_dprintk (FS_DEBUG_IRQ, " %s", irq_bitname[i]); | |
1607 | fs_dprintk (FS_DEBUG_IRQ, "\n"); | |
1608 | } | |
1609 | ||
1610 | if (status & ISR_RBRQ0_W) { | |
1611 | fs_dprintk (FS_DEBUG_IRQ, "Iiiin-coming (0)!!!!\n"); | |
1612 | process_incoming (dev, &dev->rx_rq[0]); | |
1613 | /* items mentioned on RBRQ0 are from FP 0 or 1. */ | |
1614 | top_off_fp (dev, &dev->rx_fp[0], GFP_ATOMIC); | |
1615 | top_off_fp (dev, &dev->rx_fp[1], GFP_ATOMIC); | |
1616 | } | |
1617 | ||
1618 | if (status & ISR_RBRQ1_W) { | |
1619 | fs_dprintk (FS_DEBUG_IRQ, "Iiiin-coming (1)!!!!\n"); | |
1620 | process_incoming (dev, &dev->rx_rq[1]); | |
1621 | top_off_fp (dev, &dev->rx_fp[2], GFP_ATOMIC); | |
1622 | top_off_fp (dev, &dev->rx_fp[3], GFP_ATOMIC); | |
1623 | } | |
1624 | ||
1625 | if (status & ISR_RBRQ2_W) { | |
1626 | fs_dprintk (FS_DEBUG_IRQ, "Iiiin-coming (2)!!!!\n"); | |
1627 | process_incoming (dev, &dev->rx_rq[2]); | |
1628 | top_off_fp (dev, &dev->rx_fp[4], GFP_ATOMIC); | |
1629 | top_off_fp (dev, &dev->rx_fp[5], GFP_ATOMIC); | |
1630 | } | |
1631 | ||
1632 | if (status & ISR_RBRQ3_W) { | |
1633 | fs_dprintk (FS_DEBUG_IRQ, "Iiiin-coming (3)!!!!\n"); | |
1634 | process_incoming (dev, &dev->rx_rq[3]); | |
1635 | top_off_fp (dev, &dev->rx_fp[6], GFP_ATOMIC); | |
1636 | top_off_fp (dev, &dev->rx_fp[7], GFP_ATOMIC); | |
1637 | } | |
1638 | ||
1639 | if (status & ISR_CSQ_W) { | |
1640 | fs_dprintk (FS_DEBUG_IRQ, "Command executed ok!\n"); | |
1641 | process_return_queue (dev, &dev->st_q); | |
1642 | } | |
1643 | ||
1644 | if (status & ISR_TBRQ_W) { | |
1645 | fs_dprintk (FS_DEBUG_IRQ, "Data tramsitted!\n"); | |
1646 | process_txdone_queue (dev, &dev->tx_relq); | |
1647 | } | |
1648 | ||
1649 | func_exit (); | |
1650 | return IRQ_HANDLED; | |
1651 | } | |
1652 | ||
1653 | ||
1654 | #ifdef FS_POLL_FREQ | |
1655 | static void fs_poll (unsigned long data) | |
1656 | { | |
1657 | struct fs_dev *dev = (struct fs_dev *) data; | |
1658 | ||
0da2f0f1 | 1659 | fs_irq (0, dev); |
1da177e4 LT |
1660 | dev->timer.expires = jiffies + FS_POLL_FREQ; |
1661 | add_timer (&dev->timer); | |
1662 | } | |
1663 | #endif | |
1664 | ||
6c44512d | 1665 | static int fs_init(struct fs_dev *dev) |
1da177e4 LT |
1666 | { |
1667 | struct pci_dev *pci_dev; | |
1668 | int isr, to; | |
1669 | int i; | |
1670 | ||
1671 | func_enter (); | |
1672 | pci_dev = dev->pci_dev; | |
1673 | ||
e29419ff | 1674 | printk (KERN_INFO "found a FireStream %d card, base %16llx, irq%d.\n", |
1da177e4 | 1675 | IS_FS50(dev)?50:155, |
e29419ff GKH |
1676 | (unsigned long long)pci_resource_start(pci_dev, 0), |
1677 | dev->pci_dev->irq); | |
1da177e4 LT |
1678 | |
1679 | if (fs_debug & FS_DEBUG_INIT) | |
1680 | my_hd ((unsigned char *) dev, sizeof (*dev)); | |
1681 | ||
1682 | undocumented_pci_fix (pci_dev); | |
1683 | ||
1684 | dev->hw_base = pci_resource_start(pci_dev, 0); | |
1685 | ||
1686 | dev->base = ioremap(dev->hw_base, 0x1000); | |
1687 | ||
1688 | reset_chip (dev); | |
1689 | ||
1690 | write_fs (dev, SARMODE0, 0 | |
1691 | | (0 * SARMODE0_SHADEN) /* We don't use shadow registers. */ | |
1692 | | (1 * SARMODE0_INTMODE_READCLEAR) | |
1693 | | (1 * SARMODE0_CWRE) | |
ca1ada88 RK |
1694 | | (IS_FS50(dev) ? SARMODE0_PRPWT_FS50_5: |
1695 | SARMODE0_PRPWT_FS155_3) | |
1da177e4 | 1696 | | (1 * SARMODE0_CALSUP_1) |
ca1ada88 | 1697 | | (IS_FS50(dev) ? (0 |
1da177e4 LT |
1698 | | SARMODE0_RXVCS_32 |
1699 | | SARMODE0_ABRVCS_32 | |
1700 | | SARMODE0_TXVCS_32): | |
1701 | (0 | |
1702 | | SARMODE0_RXVCS_1k | |
1703 | | SARMODE0_ABRVCS_1k | |
ca1ada88 | 1704 | | SARMODE0_TXVCS_1k))); |
1da177e4 LT |
1705 | |
1706 | /* 10ms * 100 is 1 second. That should be enough, as AN3:9 says it takes | |
1707 | 1ms. */ | |
1708 | to = 100; | |
1709 | while (--to) { | |
1710 | isr = read_fs (dev, ISR); | |
1711 | ||
1712 | /* This bit is documented as "RESERVED" */ | |
1713 | if (isr & ISR_INIT_ERR) { | |
1714 | printk (KERN_ERR "Error initializing the FS... \n"); | |
78e4be16 | 1715 | goto unmap; |
1da177e4 LT |
1716 | } |
1717 | if (isr & ISR_INIT) { | |
1718 | fs_dprintk (FS_DEBUG_INIT, "Ha! Initialized OK!\n"); | |
1719 | break; | |
1720 | } | |
1721 | ||
1722 | /* Try again after 10ms. */ | |
1723 | msleep(10); | |
1724 | } | |
1725 | ||
1726 | if (!to) { | |
1727 | printk (KERN_ERR "timeout initializing the FS... \n"); | |
78e4be16 | 1728 | goto unmap; |
1da177e4 LT |
1729 | } |
1730 | ||
1731 | /* XXX fix for fs155 */ | |
1732 | dev->channel_mask = 0x1f; | |
1733 | dev->channo = 0; | |
1734 | ||
1735 | /* AN3: 10 */ | |
1736 | write_fs (dev, SARMODE1, 0 | |
1737 | | (fs_keystream * SARMODE1_DEFHEC) /* XXX PHY */ | |
1738 | | ((loopback == 1) * SARMODE1_TSTLP) /* XXX Loopback mode enable... */ | |
1739 | | (1 * SARMODE1_DCRM) | |
1740 | | (1 * SARMODE1_DCOAM) | |
1741 | | (0 * SARMODE1_OAMCRC) | |
1742 | | (0 * SARMODE1_DUMPE) | |
1743 | | (0 * SARMODE1_GPLEN) | |
1744 | | (0 * SARMODE1_GNAM) | |
1745 | | (0 * SARMODE1_GVAS) | |
1746 | | (0 * SARMODE1_GPAS) | |
1747 | | (1 * SARMODE1_GPRI) | |
1748 | | (0 * SARMODE1_PMS) | |
1749 | | (0 * SARMODE1_GFCR) | |
1750 | | (1 * SARMODE1_HECM2) | |
1751 | | (1 * SARMODE1_HECM1) | |
1752 | | (1 * SARMODE1_HECM0) | |
1753 | | (1 << 12) /* That's what hang's driver does. Program to 0 */ | |
1754 | | (0 * 0xff) /* XXX FS155 */); | |
1755 | ||
1756 | ||
1757 | /* Cal prescale etc */ | |
1758 | ||
1759 | /* AN3: 11 */ | |
1760 | write_fs (dev, TMCONF, 0x0000000f); | |
1761 | write_fs (dev, CALPRESCALE, 0x01010101 * num); | |
1762 | write_fs (dev, 0x80, 0x000F00E4); | |
1763 | ||
1764 | /* AN3: 12 */ | |
1765 | write_fs (dev, CELLOSCONF, 0 | |
1766 | | ( 0 * CELLOSCONF_CEN) | |
1767 | | ( CELLOSCONF_SC1) | |
1768 | | (0x80 * CELLOSCONF_COBS) | |
1769 | | (num * CELLOSCONF_COPK) /* Changed from 0xff to 0x5a */ | |
1770 | | (num * CELLOSCONF_COST));/* after a hint from Hang. | |
1771 | * performance jumped 50->70... */ | |
1772 | ||
1773 | /* Magic value by Hang */ | |
1774 | write_fs (dev, CELLOSCONF_COST, 0x0B809191); | |
1775 | ||
1776 | if (IS_FS50 (dev)) { | |
1777 | write_fs (dev, RAS0, RAS0_DCD_XHLT); | |
1778 | dev->atm_dev->ci_range.vpi_bits = 12; | |
1779 | dev->atm_dev->ci_range.vci_bits = 16; | |
1780 | dev->nchannels = FS50_NR_CHANNELS; | |
1781 | } else { | |
1782 | write_fs (dev, RAS0, RAS0_DCD_XHLT | |
1783 | | (((1 << FS155_VPI_BITS) - 1) * RAS0_VPSEL) | |
1784 | | (((1 << FS155_VCI_BITS) - 1) * RAS0_VCSEL)); | |
25985edc | 1785 | /* We can chose the split arbitrarily. We might be able to |
1da177e4 LT |
1786 | support more. Whatever. This should do for now. */ |
1787 | dev->atm_dev->ci_range.vpi_bits = FS155_VPI_BITS; | |
1788 | dev->atm_dev->ci_range.vci_bits = FS155_VCI_BITS; | |
1789 | ||
1790 | /* Address bits we can't use should be compared to 0. */ | |
1791 | write_fs (dev, RAC, 0); | |
1792 | ||
1793 | /* Manual (AN9, page 6) says ASF1=0 means compare Utopia address | |
1794 | * too. I can't find ASF1 anywhere. Anyway, we AND with just the | |
1795 | * other bits, then compare with 0, which is exactly what we | |
1796 | * want. */ | |
1797 | write_fs (dev, RAM, (1 << (28 - FS155_VPI_BITS - FS155_VCI_BITS)) - 1); | |
1798 | dev->nchannels = FS155_NR_CHANNELS; | |
1799 | } | |
0c1cca1d | 1800 | dev->atm_vccs = kcalloc (dev->nchannels, sizeof (struct atm_vcc *), |
1da177e4 LT |
1801 | GFP_KERNEL); |
1802 | fs_dprintk (FS_DEBUG_ALLOC, "Alloc atmvccs: %p(%Zd)\n", | |
1803 | dev->atm_vccs, dev->nchannels * sizeof (struct atm_vcc *)); | |
1804 | ||
1805 | if (!dev->atm_vccs) { | |
1806 | printk (KERN_WARNING "Couldn't allocate memory for VCC buffers. Woops!\n"); | |
1807 | /* XXX Clean up..... */ | |
78e4be16 | 1808 | goto unmap; |
1da177e4 | 1809 | } |
1da177e4 | 1810 | |
0c1cca1d | 1811 | dev->tx_inuse = kzalloc (dev->nchannels / 8 /* bits/byte */ , GFP_KERNEL); |
1da177e4 LT |
1812 | fs_dprintk (FS_DEBUG_ALLOC, "Alloc tx_inuse: %p(%d)\n", |
1813 | dev->atm_vccs, dev->nchannels / 8); | |
1814 | ||
1815 | if (!dev->tx_inuse) { | |
1816 | printk (KERN_WARNING "Couldn't allocate memory for tx_inuse bits!\n"); | |
1817 | /* XXX Clean up..... */ | |
78e4be16 | 1818 | goto unmap; |
1da177e4 | 1819 | } |
1da177e4 LT |
1820 | /* -- RAS1 : FS155 and 50 differ. Default (0) should be OK for both */ |
1821 | /* -- RAS2 : FS50 only: Default is OK. */ | |
1822 | ||
1823 | /* DMAMODE, default should be OK. -- REW */ | |
1824 | write_fs (dev, DMAMR, DMAMR_TX_MODE_FULL); | |
1825 | ||
1826 | init_q (dev, &dev->hp_txq, TX_PQ(TXQ_HP), TXQ_NENTRIES, 0); | |
1827 | init_q (dev, &dev->lp_txq, TX_PQ(TXQ_LP), TXQ_NENTRIES, 0); | |
1828 | init_q (dev, &dev->tx_relq, TXB_RQ, TXQ_NENTRIES, 1); | |
1829 | init_q (dev, &dev->st_q, ST_Q, TXQ_NENTRIES, 1); | |
1830 | ||
1831 | for (i=0;i < FS_NR_FREE_POOLS;i++) { | |
1832 | init_fp (dev, &dev->rx_fp[i], RXB_FP(i), | |
1833 | rx_buf_sizes[i], rx_pool_sizes[i]); | |
1834 | top_off_fp (dev, &dev->rx_fp[i], GFP_KERNEL); | |
1835 | } | |
1836 | ||
1837 | ||
1838 | for (i=0;i < FS_NR_RX_QUEUES;i++) | |
1839 | init_q (dev, &dev->rx_rq[i], RXB_RQ(i), RXRQ_NENTRIES, 1); | |
1840 | ||
1841 | dev->irq = pci_dev->irq; | |
dace1453 | 1842 | if (request_irq (dev->irq, fs_irq, IRQF_SHARED, "firestream", dev)) { |
1da177e4 LT |
1843 | printk (KERN_WARNING "couldn't get irq %d for firestream.\n", pci_dev->irq); |
1844 | /* XXX undo all previous stuff... */ | |
78e4be16 | 1845 | goto unmap; |
1da177e4 LT |
1846 | } |
1847 | fs_dprintk (FS_DEBUG_INIT, "Grabbed irq %d for dev at %p.\n", dev->irq, dev); | |
1848 | ||
1849 | /* We want to be notified of most things. Just the statistics count | |
1850 | overflows are not interesting */ | |
1851 | write_fs (dev, IMR, 0 | |
1852 | | ISR_RBRQ0_W | |
1853 | | ISR_RBRQ1_W | |
1854 | | ISR_RBRQ2_W | |
1855 | | ISR_RBRQ3_W | |
1856 | | ISR_TBRQ_W | |
1857 | | ISR_CSQ_W); | |
1858 | ||
1859 | write_fs (dev, SARMODE0, 0 | |
1860 | | (0 * SARMODE0_SHADEN) /* We don't use shadow registers. */ | |
1861 | | (1 * SARMODE0_GINT) | |
1862 | | (1 * SARMODE0_INTMODE_READCLEAR) | |
1863 | | (0 * SARMODE0_CWRE) | |
1864 | | (IS_FS50(dev)?SARMODE0_PRPWT_FS50_5: | |
1865 | SARMODE0_PRPWT_FS155_3) | |
1866 | | (1 * SARMODE0_CALSUP_1) | |
1867 | | (IS_FS50 (dev)?(0 | |
1868 | | SARMODE0_RXVCS_32 | |
1869 | | SARMODE0_ABRVCS_32 | |
1870 | | SARMODE0_TXVCS_32): | |
1871 | (0 | |
1872 | | SARMODE0_RXVCS_1k | |
1873 | | SARMODE0_ABRVCS_1k | |
1874 | | SARMODE0_TXVCS_1k)) | |
1875 | | (1 * SARMODE0_RUN)); | |
1876 | ||
1877 | init_phy (dev, PHY_NTC_INIT); | |
1878 | ||
1879 | if (loopback == 2) { | |
1880 | write_phy (dev, 0x39, 0x000e); | |
1881 | } | |
1882 | ||
1883 | #ifdef FS_POLL_FREQ | |
1884 | init_timer (&dev->timer); | |
1885 | dev->timer.data = (unsigned long) dev; | |
1886 | dev->timer.function = fs_poll; | |
1887 | dev->timer.expires = jiffies + FS_POLL_FREQ; | |
1888 | add_timer (&dev->timer); | |
1889 | #endif | |
1890 | ||
1891 | dev->atm_dev->dev_data = dev; | |
1892 | ||
1893 | func_exit (); | |
1894 | return 0; | |
78e4be16 AL |
1895 | unmap: |
1896 | iounmap(dev->base); | |
1897 | return 1; | |
1da177e4 LT |
1898 | } |
1899 | ||
6c44512d GKH |
1900 | static int firestream_init_one(struct pci_dev *pci_dev, |
1901 | const struct pci_device_id *ent) | |
1da177e4 LT |
1902 | { |
1903 | struct atm_dev *atm_dev; | |
1904 | struct fs_dev *fs_dev; | |
1905 | ||
1906 | if (pci_enable_device(pci_dev)) | |
1907 | goto err_out; | |
1908 | ||
0c1cca1d | 1909 | fs_dev = kzalloc (sizeof (struct fs_dev), GFP_KERNEL); |
1da177e4 LT |
1910 | fs_dprintk (FS_DEBUG_ALLOC, "Alloc fs-dev: %p(%Zd)\n", |
1911 | fs_dev, sizeof (struct fs_dev)); | |
1912 | if (!fs_dev) | |
1913 | goto err_out; | |
d9ca676b | 1914 | atm_dev = atm_dev_register("fs", &pci_dev->dev, &ops, -1, NULL); |
1da177e4 LT |
1915 | if (!atm_dev) |
1916 | goto err_out_free_fs_dev; | |
1917 | ||
1918 | fs_dev->pci_dev = pci_dev; | |
1919 | fs_dev->atm_dev = atm_dev; | |
1920 | fs_dev->flags = ent->driver_data; | |
1921 | ||
1922 | if (fs_init(fs_dev)) | |
1923 | goto err_out_free_atm_dev; | |
1924 | ||
1925 | fs_dev->next = fs_boards; | |
1926 | fs_boards = fs_dev; | |
1927 | return 0; | |
1928 | ||
1929 | err_out_free_atm_dev: | |
1930 | atm_dev_deregister(atm_dev); | |
1931 | err_out_free_fs_dev: | |
1932 | kfree(fs_dev); | |
1933 | err_out: | |
1934 | return -ENODEV; | |
1935 | } | |
1936 | ||
6c44512d | 1937 | static void firestream_remove_one(struct pci_dev *pdev) |
1da177e4 LT |
1938 | { |
1939 | int i; | |
1940 | struct fs_dev *dev, *nxtdev; | |
1941 | struct fs_vcc *vcc; | |
1942 | struct FS_BPENTRY *fp, *nxt; | |
1943 | ||
1944 | func_enter (); | |
1945 | ||
1946 | #if 0 | |
1947 | printk ("hptxq:\n"); | |
1948 | for (i=0;i<60;i++) { | |
1949 | printk ("%d: %08x %08x %08x %08x \n", | |
1950 | i, pq[qp].cmd, pq[qp].p0, pq[qp].p1, pq[qp].p2); | |
1951 | qp++; | |
1952 | if (qp >= 60) qp = 0; | |
1953 | } | |
1954 | ||
1955 | printk ("descriptors:\n"); | |
1956 | for (i=0;i<60;i++) { | |
1957 | printk ("%d: %p: %08x %08x %p %p\n", | |
1958 | i, da[qd], dq[qd].flags, dq[qd].bsa, dq[qd].skb, dq[qd].dev); | |
1959 | qd++; | |
1960 | if (qd >= 60) qd = 0; | |
1961 | } | |
1962 | #endif | |
1963 | ||
1964 | for (dev = fs_boards;dev != NULL;dev=nxtdev) { | |
1965 | fs_dprintk (FS_DEBUG_CLEANUP, "Releasing resources for dev at %p.\n", dev); | |
1966 | ||
1967 | /* XXX Hit all the tx channels too! */ | |
1968 | ||
1969 | for (i=0;i < dev->nchannels;i++) { | |
1970 | if (dev->atm_vccs[i]) { | |
1971 | vcc = FS_VCC (dev->atm_vccs[i]); | |
1972 | submit_command (dev, &dev->hp_txq, | |
1973 | QE_CMD_TX_PURGE_INH | QE_CMD_IMM_INQ | vcc->channo, 0,0,0); | |
1974 | submit_command (dev, &dev->hp_txq, | |
1975 | QE_CMD_RX_PURGE_INH | QE_CMD_IMM_INQ | vcc->channo, 0,0,0); | |
1976 | ||
1977 | } | |
1978 | } | |
1979 | ||
1980 | /* XXX Wait a while for the chip to release all buffers. */ | |
1981 | ||
1982 | for (i=0;i < FS_NR_FREE_POOLS;i++) { | |
1983 | for (fp=bus_to_virt (read_fs (dev, FP_SA(dev->rx_fp[i].offset))); | |
1984 | !(fp->flags & FP_FLAGS_EPI);fp = nxt) { | |
1985 | fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p\n", fp->skb); | |
1986 | dev_kfree_skb_any (fp->skb); | |
1987 | nxt = bus_to_virt (fp->next); | |
1988 | fs_dprintk (FS_DEBUG_ALLOC, "Free rec-d: %p\n", fp); | |
1989 | kfree (fp); | |
1990 | } | |
1991 | fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p\n", fp->skb); | |
1992 | dev_kfree_skb_any (fp->skb); | |
1993 | fs_dprintk (FS_DEBUG_ALLOC, "Free rec-d: %p\n", fp); | |
1994 | kfree (fp); | |
1995 | } | |
1996 | ||
1997 | /* Hang the chip in "reset", prevent it clobbering memory that is | |
1998 | no longer ours. */ | |
1999 | reset_chip (dev); | |
2000 | ||
2001 | fs_dprintk (FS_DEBUG_CLEANUP, "Freeing irq%d.\n", dev->irq); | |
2002 | free_irq (dev->irq, dev); | |
aff12acc | 2003 | del_timer_sync (&dev->timer); |
1da177e4 LT |
2004 | |
2005 | atm_dev_deregister(dev->atm_dev); | |
2006 | free_queue (dev, &dev->hp_txq); | |
2007 | free_queue (dev, &dev->lp_txq); | |
2008 | free_queue (dev, &dev->tx_relq); | |
2009 | free_queue (dev, &dev->st_q); | |
2010 | ||
2011 | fs_dprintk (FS_DEBUG_ALLOC, "Free atmvccs: %p\n", dev->atm_vccs); | |
2012 | kfree (dev->atm_vccs); | |
2013 | ||
2014 | for (i=0;i< FS_NR_FREE_POOLS;i++) | |
2015 | free_freepool (dev, &dev->rx_fp[i]); | |
2016 | ||
2017 | for (i=0;i < FS_NR_RX_QUEUES;i++) | |
2018 | free_queue (dev, &dev->rx_rq[i]); | |
2019 | ||
78e4be16 | 2020 | iounmap(dev->base); |
1da177e4 LT |
2021 | fs_dprintk (FS_DEBUG_ALLOC, "Free fs-dev: %p\n", dev); |
2022 | nxtdev = dev->next; | |
2023 | kfree (dev); | |
2024 | } | |
2025 | ||
2026 | func_exit (); | |
2027 | } | |
2028 | ||
2029 | static struct pci_device_id firestream_pci_tbl[] = { | |
b16170c1 PH |
2030 | { PCI_VDEVICE(FUJITSU_ME, PCI_DEVICE_ID_FUJITSU_FS50), FS_IS50}, |
2031 | { PCI_VDEVICE(FUJITSU_ME, PCI_DEVICE_ID_FUJITSU_FS155), FS_IS155}, | |
1da177e4 LT |
2032 | { 0, } |
2033 | }; | |
2034 | ||
2035 | MODULE_DEVICE_TABLE(pci, firestream_pci_tbl); | |
2036 | ||
2037 | static struct pci_driver firestream_driver = { | |
2038 | .name = "firestream", | |
2039 | .id_table = firestream_pci_tbl, | |
2040 | .probe = firestream_init_one, | |
6c44512d | 2041 | .remove = firestream_remove_one, |
1da177e4 LT |
2042 | }; |
2043 | ||
2044 | static int __init firestream_init_module (void) | |
2045 | { | |
2046 | int error; | |
2047 | ||
2048 | func_enter (); | |
2049 | error = pci_register_driver(&firestream_driver); | |
2050 | func_exit (); | |
2051 | return error; | |
2052 | } | |
2053 | ||
2054 | static void __exit firestream_cleanup_module(void) | |
2055 | { | |
2056 | pci_unregister_driver(&firestream_driver); | |
2057 | } | |
2058 | ||
2059 | module_init(firestream_init_module); | |
2060 | module_exit(firestream_cleanup_module); | |
2061 | ||
2062 | MODULE_LICENSE("GPL"); | |
2063 | ||
2064 | ||
2065 |