[deliverable/linux.git] / drivers / bluetooth / Kconfig


menu "Bluetooth device drivers"
	depends on BT

config BT_INTEL
	tristate

config BT_BCM
	tristate
	select FW_LOADER

config BT_HCIBTUSB
	tristate "HCI USB driver"
	depends on USB
	select BT_INTEL
	help
	  Bluetooth HCI USB driver.
	  This driver is required if you want to use Bluetooth devices with
	  USB interface.

	  Say Y here to compile support for Bluetooth USB devices into the
	  kernel or say M to compile it as module (btusb).

config BT_HCIBTUSB_BCM
	bool "Broadcom protocol support"
	depends on BT_HCIBTUSB
	select BT_BCM
	default y
	help
	  The Broadcom protocol support enables firmware and patchram
	  download support for Broadcom Bluetooth controllers.

	  Say Y here to compile support for Broadcom protocol.

config BT_HCIBTSDIO
	tristate "HCI SDIO driver"
	depends on MMC
	help
	  Bluetooth HCI SDIO driver.
	  This driver is required if you want to use Bluetooth device with
	  SDIO interface.

	  Say Y here to compile support for Bluetooth SDIO devices into the
	  kernel or say M to compile it as module (btsdio).

config BT_HCIUART
	tristate "HCI UART driver"
	depends on TTY
	help
	  Bluetooth HCI UART driver.
	  This driver is required if you want to use Bluetooth devices with
	  serial port interface. You will also need this driver if you have
	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
	  adapter and BrainBoxes Bluetooth PC Card.

	  Say Y here to compile support for Bluetooth UART devices into the
	  kernel or say M to compile it as module (hci_uart).

config BT_HCIUART_H4
	bool "UART (H4) protocol support"
	depends on BT_HCIUART
	help
	  UART (H4) is serial protocol for communication between Bluetooth
	  device and host. This protocol is required for most Bluetooth devices
	  with UART interface, including PCMCIA and CF cards.

	  Say Y here to compile support for HCI UART (H4) protocol.

config BT_HCIUART_BCSP
	bool "BCSP protocol support"
	depends on BT_HCIUART
	select BITREVERSE
	help
	  BCSP (BlueCore Serial Protocol) is serial protocol for communication
	  between Bluetooth device and host. This protocol is required for non
	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	  CF cards.

	  Say Y here to compile support for HCI BCSP protocol.

config BT_HCIUART_ATH3K
	bool "Atheros AR300x serial support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	help
	  HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	  communication between host and Atheros AR300x Bluetooth devices.
	  This protocol enables AR300x chips to be enabled with
	  power management support.
	  Enable this if you have Atheros AR300x serial Bluetooth device.

	  Say Y here to compile support for HCI UART ATH3K protocol.

config BT_HCIUART_LL
	bool "HCILL protocol support"
	depends on BT_HCIUART
	help
	  HCILL (HCI Low Level) is a serial protocol for communication
	  between Bluetooth device and host. This protocol is required for
	  serial Bluetooth devices that are based on Texas Instruments'
	  BRF chips.

	  Say Y here to compile support for HCILL protocol.

config BT_HCIUART_3WIRE
	bool "Three-wire UART (H5) protocol support"
	depends on BT_HCIUART
	help
	  The HCI Three-wire UART Transport Layer makes it possible to
	  user the Bluetooth HCI over a serial port interface. The HCI
	  Three-wire UART Transport Layer assumes that the UART
	  communication may have bit errors, overrun errors or burst
	  errors and thereby making CTS/RTS lines unnecessary.

	  Say Y here to compile support for Three-wire UART protocol.

config BT_HCIUART_INTEL
	bool "Intel protocol support"
	depends on BT_HCIUART
	select BT_INTEL
	help
	  The Intel protocol support enables Bluetooth HCI over serial
	  port interface for Intel Bluetooth controllers.

	  Say Y here to compile support for Intel protocol.

config BT_HCIUART_BCM
	bool "Broadcom protocol support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	select BT_BCM
	help
	  The Broadcom protocol support enables Bluetooth HCI over serial
	  port interface for Broadcom Bluetooth controllers.

	  Say Y here to compile support for Broadcom protocol.

config BT_HCIBCM203X
	tristate "HCI BCM203x USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BCM203x USB driver.
	  This driver provides the firmware loading mechanism for the Broadcom
	  Blutonium based devices.

	  Say Y here to compile support for HCI BCM203x devices into the
	  kernel or say M to compile it as module (bcm203x).

config BT_HCIBPA10X
	tristate "HCI BPA10x USB driver"
	depends on USB
	help
	  Bluetooth HCI BPA10x USB driver.
	  This driver provides support for the Digianswer BPA 100/105 Bluetooth
	  sniffer devices.

	  Say Y here to compile support for HCI BPA10x devices into the
	  kernel or say M to compile it as module (bpa10x).

config BT_HCIBFUSB
	tristate "HCI BlueFRITZ! USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BlueFRITZ! USB driver.
	  This driver provides support for Bluetooth USB devices with AVM
	  interface:
	     AVM BlueFRITZ! USB

	  Say Y here to compile support for HCI BFUSB devices into the
	  kernel or say M to compile it as module (bfusb).

config BT_HCIDTL1
	tristate "HCI DTL1 (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI DTL1 (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Nokia DTL1 interface:
	     Nokia Bluetooth Card
	     Socket Bluetooth CF Card

	  Say Y here to compile support for HCI DTL1 devices into the
	  kernel or say M to compile it as module (dtl1_cs).

config BT_HCIBT3C
	tristate "HCI BT3C (PC Card) driver"
	depends on PCMCIA
	select FW_LOADER
	help
	  Bluetooth HCI BT3C (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  3Com BT3C interface:
	     3Com Bluetooth Card (3CRWB6096)
	     HP Bluetooth Card

	  Say Y here to compile support for HCI BT3C devices into the
	  kernel or say M to compile it as module (bt3c_cs).

config BT_HCIBLUECARD
	tristate "HCI BlueCard (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI BlueCard (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Anycom BlueCard interface:
	     Anycom Bluetooth PC Card
	     Anycom Bluetooth CF Card

	  Say Y here to compile support for HCI BlueCard devices into the
	  kernel or say M to compile it as module (bluecard_cs).

config BT_HCIBTUART
	tristate "HCI UART (PC Card) device driver"
	depends on PCMCIA
	help
	  Bluetooth HCI UART (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  an UART interface:
	     Xircom CreditCard Bluetooth Adapter
	     Xircom RealPort2 Bluetooth Adapter
	     Sphinx PICO Card
	     H-Soft blue+Card
	     Cyber-blue Compact Flash Card

	  Say Y here to compile support for HCI UART devices into the
	  kernel or say M to compile it as module (btuart_cs).

config BT_HCIVHCI
	tristate "HCI VHCI (Virtual HCI device) driver"
	help
	  Bluetooth Virtual HCI device driver.
	  This driver is required if you want to use HCI Emulation software.

	  Say Y here to compile support for virtual HCI devices into the
	  kernel or say M to compile it as module (hci_vhci).

config BT_MRVL
	tristate "Marvell Bluetooth driver support"
	help
	  The core driver to support Marvell Bluetooth devices.

	  This driver is required if you want to support
	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897.

	  Say Y here to compile Marvell Bluetooth driver
	  into the kernel or say M to compile it as module.

config BT_MRVL_SDIO
	tristate "Marvell BT-over-SDIO driver"
	depends on BT_MRVL && MMC
	select FW_LOADER
	select WANT_DEV_COREDUMP
	help
	  The driver for Marvell Bluetooth chipsets with SDIO interface.

	  This driver is required if you want to use Marvell Bluetooth
	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897
	  chipsets are supported.

	  Say Y here to compile support for Marvell BT-over-SDIO driver
	  into the kernel or say M to compile it as module.

config BT_ATH3K
	tristate "Atheros firmware download driver"
	depends on BT_HCIBTUSB
	select FW_LOADER
	help
	  Bluetooth firmware download driver.
	  This driver loads the firmware into the Atheros Bluetooth
	  chipset.

	  Say Y here to compile support for "Atheros firmware download driver"
	  into the kernel or say M to compile it as module (ath3k).

config BT_WILINK
	tristate "Texas Instruments WiLink7 driver"
	depends on TI_ST
	help
	  This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
	  combo devices. This makes use of shared transport line discipline
	  core driver to communicate with the BT core of the combo chip.

	  Say Y here to compile support for Texas Instrument's WiLink7 driver
	  into the kernel or say M to compile it as module (btwilink).

endmenu
Commit	Line	Data
1da177e4 LT	1
	2	menu "Bluetooth device drivers"
	3	depends on BT
	4
48f0ed1b MH	5	config BT_INTEL
	6	tristate
	7
4fba30f0 MH	8	config BT_BCM
4fba30f0 MH	9	tristate
1c8ba6d0	10	select FW_LOADER
4fba30f0	11
5e23b923	12	config BT_HCIBTUSB
9bfa35fe MH	13	tristate "HCI USB driver"
9bfa35fe MH	14	depends on USB
4185a0f5	15	select BT_INTEL
5e23b923 MH	16	help
	17	Bluetooth HCI USB driver.
	18	This driver is required if you want to use Bluetooth devices with
	19	USB interface.
	20
5e23b923 MH	21	Say Y here to compile support for Bluetooth USB devices into the
	22	kernel or say M to compile it as module (btusb).
	23
c2bfb100 MH	24	config BT_HCIBTUSB_BCM
	25	bool "Broadcom protocol support"
	26	depends on BT_HCIBTUSB
	27	select BT_BCM
	28	default y
	29	help
	30	The Broadcom protocol support enables firmware and patchram
	31	download support for Broadcom Bluetooth controllers.
	32
	33	Say Y here to compile support for Broadcom protocol.
	34
ddbaf13e MH	35	config BT_HCIBTSDIO
	36	tristate "HCI SDIO driver"
	37	depends on MMC
	38	help
	39	Bluetooth HCI SDIO driver.
	40	This driver is required if you want to use Bluetooth device with
	41	SDIO interface.
	42
	43	Say Y here to compile support for Bluetooth SDIO devices into the
	44	kernel or say M to compile it as module (btsdio).
	45
1da177e4 LT	46	config BT_HCIUART
1da177e4 LT	47	tristate "HCI UART driver"
4f73bc4d	48	depends on TTY
1da177e4 LT	49	help
	50	Bluetooth HCI UART driver.
	51	This driver is required if you want to use Bluetooth devices with
8ba8b4c0 SG	52	serial port interface. You will also need this driver if you have
8ba8b4c0 SG	53	UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
1da177e4 LT	54	adapter and BrainBoxes Bluetooth PC Card.
	55
	56	Say Y here to compile support for Bluetooth UART devices into the
	57	kernel or say M to compile it as module (hci_uart).
	58
	59	config BT_HCIUART_H4
	60	bool "UART (H4) protocol support"
	61	depends on BT_HCIUART
	62	help
8ba8b4c0 SG	63	UART (H4) is serial protocol for communication between Bluetooth
	64	device and host. This protocol is required for most Bluetooth devices
	65	with UART interface, including PCMCIA and CF cards.
1da177e4 LT	66
	67	Say Y here to compile support for HCI UART (H4) protocol.
	68
	69	config BT_HCIUART_BCSP
	70	bool "BCSP protocol support"
	71	depends on BT_HCIUART
d3a8eab0	72	select BITREVERSE
1da177e4	73	help
8ba8b4c0	74	BCSP (BlueCore Serial Protocol) is serial protocol for communication
1da177e4 LT	75	between Bluetooth device and host. This protocol is required for non
	76	USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	77	CF cards.
	78
	79	Say Y here to compile support for HCI BCSP protocol.
	80
b3190df6 SS	81	config BT_HCIUART_ATH3K
	82	bool "Atheros AR300x serial support"
	83	depends on BT_HCIUART
d90aa682	84	select BT_HCIUART_H4
b3190df6 SS	85	help
	86	HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	87	communication between host and Atheros AR300x Bluetooth devices.
	88	This protocol enables AR300x chips to be enabled with
	89	power management support.
	90	Enable this if you have Atheros AR300x serial Bluetooth device.
	91
	92	Say Y here to compile support for HCI UART ATH3K protocol.
	93
166d2f6a OBC	94	config BT_HCIUART_LL
	95	bool "HCILL protocol support"
	96	depends on BT_HCIUART
	97	help
	98	HCILL (HCI Low Level) is a serial protocol for communication
	99	between Bluetooth device and host. This protocol is required for
	100	serial Bluetooth devices that are based on Texas Instruments'
	101	BRF chips.
	102
	103	Say Y here to compile support for HCILL protocol.
	104
7dec65c8 JH	105	config BT_HCIUART_3WIRE
	106	bool "Three-wire UART (H5) protocol support"
	107	depends on BT_HCIUART
	108	help
	109	The HCI Three-wire UART Transport Layer makes it possible to
	110	user the Bluetooth HCI over a serial port interface. The HCI
	111	Three-wire UART Transport Layer assumes that the UART
	112	communication may have bit errors, overrun errors or burst
	113	errors and thereby making CTS/RTS lines unnecessary.
	114
	115	Say Y here to compile support for Three-wire UART protocol.
	116
16e3887f MH	117	config BT_HCIUART_INTEL
	118	bool "Intel protocol support"
	119	depends on BT_HCIUART
bca03c95	120	select BT_INTEL
16e3887f MH	121	help
	122	The Intel protocol support enables Bluetooth HCI over serial
	123	port interface for Intel Bluetooth controllers.
	124
	125	Say Y here to compile support for Intel protocol.
	126
e9a2dd26 MH	127	config BT_HCIUART_BCM
	128	bool "Broadcom protocol support"
	129	depends on BT_HCIUART
bdd8818e	130	select BT_HCIUART_H4
3e0ac12a	131	select BT_BCM
e9a2dd26 MH	132	help
	133	The Broadcom protocol support enables Bluetooth HCI over serial
	134	port interface for Broadcom Bluetooth controllers.
	135
	136	Say Y here to compile support for Broadcom protocol.
	137
1da177e4 LT	138	config BT_HCIBCM203X
	139	tristate "HCI BCM203x USB driver"
	140	depends on USB
	141	select FW_LOADER
	142	help
	143	Bluetooth HCI BCM203x USB driver.
	144	This driver provides the firmware loading mechanism for the Broadcom
	145	Blutonium based devices.
	146
	147	Say Y here to compile support for HCI BCM203x devices into the
	148	kernel or say M to compile it as module (bcm203x).
	149
	150	config BT_HCIBPA10X
	151	tristate "HCI BPA10x USB driver"
	152	depends on USB
	153	help
	154	Bluetooth HCI BPA10x USB driver.
	155	This driver provides support for the Digianswer BPA 100/105 Bluetooth
	156	sniffer devices.
	157
	158	Say Y here to compile support for HCI BPA10x devices into the
	159	kernel or say M to compile it as module (bpa10x).
	160
	161	config BT_HCIBFUSB
	162	tristate "HCI BlueFRITZ! USB driver"
	163	depends on USB
	164	select FW_LOADER
	165	help
	166	Bluetooth HCI BlueFRITZ! USB driver.
	167	This driver provides support for Bluetooth USB devices with AVM
	168	interface:
	169	AVM BlueFRITZ! USB
	170
	171	Say Y here to compile support for HCI BFUSB devices into the
	172	kernel or say M to compile it as module (bfusb).
	173
	174	config BT_HCIDTL1
	175	tristate "HCI DTL1 (PC Card) driver"
	176	depends on PCMCIA
	177	help
	178	Bluetooth HCI DTL1 (PC Card) driver.
	179	This driver provides support for Bluetooth PCMCIA devices with
	180	Nokia DTL1 interface:
	181	Nokia Bluetooth Card
	182	Socket Bluetooth CF Card
	183
	184	Say Y here to compile support for HCI DTL1 devices into the
	185	kernel or say M to compile it as module (dtl1_cs).
	186
	187	config BT_HCIBT3C
	188	tristate "HCI BT3C (PC Card) driver"
	189	depends on PCMCIA
	190	select FW_LOADER
	191	help
	192	Bluetooth HCI BT3C (PC Card) driver.
	193	This driver provides support for Bluetooth PCMCIA devices with
	194	3Com BT3C interface:
	195	3Com Bluetooth Card (3CRWB6096)
	196	HP Bluetooth Card
	197
	198	Say Y here to compile support for HCI BT3C devices into the
	199	kernel or say M to compile it as module (bt3c_cs).
	200
	201	config BT_HCIBLUECARD
202	tristate "HCI BlueCard (PC Card) driver"
203	depends on PCMCIA
204	help
205	Bluetooth HCI BlueCard (PC Card) driver.
206	This driver provides support for Bluetooth PCMCIA devices with
207	Anycom BlueCard interface:
208	Anycom Bluetooth PC Card
209	Anycom Bluetooth CF Card
210
211	Say Y here to compile support for HCI BlueCard devices into the
212	kernel or say M to compile it as module (bluecard_cs).
213
214	config BT_HCIBTUART
215	tristate "HCI UART (PC Card) device driver"
216	depends on PCMCIA
217	help
218	Bluetooth HCI UART (PC Card) driver.
219	This driver provides support for Bluetooth PCMCIA devices with
220	an UART interface:
221	Xircom CreditCard Bluetooth Adapter
222	Xircom RealPort2 Bluetooth Adapter
223	Sphinx PICO Card
224	H-Soft blue+Card
225	Cyber-blue Compact Flash Card
226
227	Say Y here to compile support for HCI UART devices into the
228	kernel or say M to compile it as module (btuart_cs).
229
230	config BT_HCIVHCI
231	tristate "HCI VHCI (Virtual HCI device) driver"
232	help
233	Bluetooth Virtual HCI device driver.
234	This driver is required if you want to use HCI Emulation software.
235
236	Say Y here to compile support for virtual HCI devices into the
237	kernel or say M to compile it as module (hci_vhci).
238
132ff4e5 BZ	239	config BT_MRVL
132ff4e5 BZ	240	tristate "Marvell Bluetooth driver support"
132ff4e5 BZ	241	help
	242	The core driver to support Marvell Bluetooth devices.
	243
	244	This driver is required if you want to support
3907d558	245	Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897.
132ff4e5 BZ	246
	247	Say Y here to compile Marvell Bluetooth driver
	248	into the kernel or say M to compile it as module.
	249
789221ec BZ	250	config BT_MRVL_SDIO
	251	tristate "Marvell BT-over-SDIO driver"
	252	depends on BT_MRVL && MMC
e7a25f98	253	select FW_LOADER
dc759613	254	select WANT_DEV_COREDUMP
789221ec BZ	255	help
	256	The driver for Marvell Bluetooth chipsets with SDIO interface.
	257
	258	This driver is required if you want to use Marvell Bluetooth
3907d558	259	devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897
2ac654f7	260	chipsets are supported.
789221ec BZ	261
	262	Say Y here to compile support for Marvell BT-over-SDIO driver
	263	into the kernel or say M to compile it as module.
	264
9670d80a VK	265	config BT_ATH3K
	266	tristate "Atheros firmware download driver"
	267	depends on BT_HCIBTUSB
	268	select FW_LOADER
	269	help
	270	Bluetooth firmware download driver.
	271	This driver loads the firmware into the Atheros Bluetooth
	272	chipset.
1da177e4	273
9670d80a VK	274	Say Y here to compile support for "Atheros firmware download driver"
	275	into the kernel or say M to compile it as module (ath3k).
	276
363907af PS	277	config BT_WILINK
	278	tristate "Texas Instruments WiLink7 driver"
	279	depends on TI_ST
	280	help
	281	This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
	282	combo devices. This makes use of shared transport line discipline
	283	core driver to communicate with the BT core of the combo chip.
	284
	285	Say Y here to compile support for Texas Instrument's WiLink7 driver
22e8ee12 PM	286	into the kernel or say M to compile it as module (btwilink).
22e8ee12 PM	287
9670d80a	288	endmenu