[deliverable/linux.git] / drivers / bluetooth / Kconfig


menu "Bluetooth device drivers"
	depends on BT

config BT_HCIBTUSB
	tristate "HCI USB driver"
	depends on USB
	help
	  Bluetooth HCI USB driver.
	  This driver is required if you want to use Bluetooth devices with
	  USB interface.

	  Say Y here to compile support for Bluetooth USB devices into the
	  kernel or say M to compile it as module (btusb).

config BT_HCIBTSDIO
	tristate "HCI SDIO driver"
	depends on MMC
	help
	  Bluetooth HCI SDIO driver.
	  This driver is required if you want to use Bluetooth device with
	  SDIO interface.

	  Say Y here to compile support for Bluetooth SDIO devices into the
	  kernel or say M to compile it as module (btsdio).

config BT_HCIUART
	tristate "HCI UART driver"
	depends on TTY
	help
	  Bluetooth HCI UART driver.
	  This driver is required if you want to use Bluetooth devices with
	  serial port interface. You will also need this driver if you have
	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
	  adapter and BrainBoxes Bluetooth PC Card.

	  Say Y here to compile support for Bluetooth UART devices into the
	  kernel or say M to compile it as module (hci_uart).

config BT_HCIUART_H4
	bool "UART (H4) protocol support"
	depends on BT_HCIUART
	help
	  UART (H4) is serial protocol for communication between Bluetooth
	  device and host. This protocol is required for most Bluetooth devices
	  with UART interface, including PCMCIA and CF cards.

	  Say Y here to compile support for HCI UART (H4) protocol.

config BT_HCIUART_BCSP
	bool "BCSP protocol support"
	depends on BT_HCIUART
	select BITREVERSE
	help
	  BCSP (BlueCore Serial Protocol) is serial protocol for communication
	  between Bluetooth device and host. This protocol is required for non
	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	  CF cards.

	  Say Y here to compile support for HCI BCSP protocol.

config BT_HCIUART_ATH3K
	bool "Atheros AR300x serial support"
	depends on BT_HCIUART
	help
	  HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	  communication between host and Atheros AR300x Bluetooth devices.
	  This protocol enables AR300x chips to be enabled with
	  power management support.
	  Enable this if you have Atheros AR300x serial Bluetooth device.

	  Say Y here to compile support for HCI UART ATH3K protocol.

config BT_HCIUART_LL
	bool "HCILL protocol support"
	depends on BT_HCIUART
	help
	  HCILL (HCI Low Level) is a serial protocol for communication
	  between Bluetooth device and host. This protocol is required for
	  serial Bluetooth devices that are based on Texas Instruments'
	  BRF chips.

	  Say Y here to compile support for HCILL protocol.

config BT_HCIUART_3WIRE
	bool "Three-wire UART (H5) protocol support"
	depends on BT_HCIUART
	help
	  The HCI Three-wire UART Transport Layer makes it possible to
	  user the Bluetooth HCI over a serial port interface. The HCI
	  Three-wire UART Transport Layer assumes that the UART
	  communication may have bit errors, overrun errors or burst
	  errors and thereby making CTS/RTS lines unnecessary.

	  Say Y here to compile support for Three-wire UART protocol.

config BT_HCIUART_INTEL
	bool "Intel protocol support"
	depends on BT_HCIUART
	help
	  The Intel protocol support enables Bluetooth HCI over serial
	  port interface for Intel Bluetooth controllers.

	  Say Y here to compile support for Intel protocol.

config BT_HCIUART_BCM
	bool "Broadcom protocol support"
	depends on BT_HCIUART
	help
	  The Broadcom protocol support enables Bluetooth HCI over serial
	  port interface for Broadcom Bluetooth controllers.

	  Say Y here to compile support for Broadcom protocol.

config BT_HCIBCM203X
	tristate "HCI BCM203x USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BCM203x USB driver.
	  This driver provides the firmware loading mechanism for the Broadcom
	  Blutonium based devices.

	  Say Y here to compile support for HCI BCM203x devices into the
	  kernel or say M to compile it as module (bcm203x).

config BT_HCIBPA10X
	tristate "HCI BPA10x USB driver"
	depends on USB
	help
	  Bluetooth HCI BPA10x USB driver.
	  This driver provides support for the Digianswer BPA 100/105 Bluetooth
	  sniffer devices.

	  Say Y here to compile support for HCI BPA10x devices into the
	  kernel or say M to compile it as module (bpa10x).

config BT_HCIBFUSB
	tristate "HCI BlueFRITZ! USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BlueFRITZ! USB driver.
	  This driver provides support for Bluetooth USB devices with AVM
	  interface:
	     AVM BlueFRITZ! USB

	  Say Y here to compile support for HCI BFUSB devices into the
	  kernel or say M to compile it as module (bfusb).

config BT_HCIDTL1
	tristate "HCI DTL1 (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI DTL1 (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Nokia DTL1 interface:
	     Nokia Bluetooth Card
	     Socket Bluetooth CF Card

	  Say Y here to compile support for HCI DTL1 devices into the
	  kernel or say M to compile it as module (dtl1_cs).

config BT_HCIBT3C
	tristate "HCI BT3C (PC Card) driver"
	depends on PCMCIA
	select FW_LOADER
	help
	  Bluetooth HCI BT3C (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  3Com BT3C interface:
	     3Com Bluetooth Card (3CRWB6096)
	     HP Bluetooth Card

	  Say Y here to compile support for HCI BT3C devices into the
	  kernel or say M to compile it as module (bt3c_cs).

config BT_HCIBLUECARD
	tristate "HCI BlueCard (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI BlueCard (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Anycom BlueCard interface:
	     Anycom Bluetooth PC Card
	     Anycom Bluetooth CF Card

	  Say Y here to compile support for HCI BlueCard devices into the
	  kernel or say M to compile it as module (bluecard_cs).

config BT_HCIBTUART
	tristate "HCI UART (PC Card) device driver"
	depends on PCMCIA
	help
	  Bluetooth HCI UART (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  an UART interface:
	     Xircom CreditCard Bluetooth Adapter
	     Xircom RealPort2 Bluetooth Adapter
	     Sphinx PICO Card
	     H-Soft blue+Card
	     Cyber-blue Compact Flash Card

	  Say Y here to compile support for HCI UART devices into the
	  kernel or say M to compile it as module (btuart_cs).

config BT_HCIVHCI
	tristate "HCI VHCI (Virtual HCI device) driver"
	help
	  Bluetooth Virtual HCI device driver.
	  This driver is required if you want to use HCI Emulation software.

	  Say Y here to compile support for virtual HCI devices into the
	  kernel or say M to compile it as module (hci_vhci).

config BT_MRVL
	tristate "Marvell Bluetooth driver support"
	help
	  The core driver to support Marvell Bluetooth devices.

	  This driver is required if you want to support
	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897.

	  Say Y here to compile Marvell Bluetooth driver
	  into the kernel or say M to compile it as module.

config BT_MRVL_SDIO
	tristate "Marvell BT-over-SDIO driver"
	depends on BT_MRVL && MMC
	select FW_LOADER
	select WANT_DEV_COREDUMP
	help
	  The driver for Marvell Bluetooth chipsets with SDIO interface.

	  This driver is required if you want to use Marvell Bluetooth
	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897
	  chipsets are supported.

	  Say Y here to compile support for Marvell BT-over-SDIO driver
	  into the kernel or say M to compile it as module.

config BT_ATH3K
	tristate "Atheros firmware download driver"
	depends on BT_HCIBTUSB
	select FW_LOADER
	help
	  Bluetooth firmware download driver.
	  This driver loads the firmware into the Atheros Bluetooth
	  chipset.

	  Say Y here to compile support for "Atheros firmware download driver"
	  into the kernel or say M to compile it as module (ath3k).

config BT_WILINK
	tristate "Texas Instruments WiLink7 driver"
	depends on TI_ST
	help
	  This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
	  combo devices. This makes use of shared transport line discipline
	  core driver to communicate with the BT core of the combo chip.

	  Say Y here to compile support for Texas Instrument's WiLink7 driver
	  into the kernel or say M to compile it as module (btwilink).

endmenu
Commit	Line	Data
1da177e4 LT	1
	2	menu "Bluetooth device drivers"
	3	depends on BT
	4
5e23b923	5	config BT_HCIBTUSB
9bfa35fe MH	6	tristate "HCI USB driver"
9bfa35fe MH	7	depends on USB
5e23b923 MH	8	help
	9	Bluetooth HCI USB driver.
	10	This driver is required if you want to use Bluetooth devices with
	11	USB interface.
	12
5e23b923 MH	13	Say Y here to compile support for Bluetooth USB devices into the
	14	kernel or say M to compile it as module (btusb).
	15
ddbaf13e MH	16	config BT_HCIBTSDIO
	17	tristate "HCI SDIO driver"
	18	depends on MMC
	19	help
	20	Bluetooth HCI SDIO driver.
	21	This driver is required if you want to use Bluetooth device with
	22	SDIO interface.
	23
	24	Say Y here to compile support for Bluetooth SDIO devices into the
	25	kernel or say M to compile it as module (btsdio).
	26
1da177e4 LT	27	config BT_HCIUART
1da177e4 LT	28	tristate "HCI UART driver"
4f73bc4d	29	depends on TTY
1da177e4 LT	30	help
	31	Bluetooth HCI UART driver.
	32	This driver is required if you want to use Bluetooth devices with
8ba8b4c0 SG	33	serial port interface. You will also need this driver if you have
8ba8b4c0 SG	34	UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
1da177e4 LT	35	adapter and BrainBoxes Bluetooth PC Card.
	36
	37	Say Y here to compile support for Bluetooth UART devices into the
	38	kernel or say M to compile it as module (hci_uart).
	39
	40	config BT_HCIUART_H4
	41	bool "UART (H4) protocol support"
	42	depends on BT_HCIUART
	43	help
8ba8b4c0 SG	44	UART (H4) is serial protocol for communication between Bluetooth
	45	device and host. This protocol is required for most Bluetooth devices
	46	with UART interface, including PCMCIA and CF cards.
1da177e4 LT	47
	48	Say Y here to compile support for HCI UART (H4) protocol.
	49
	50	config BT_HCIUART_BCSP
	51	bool "BCSP protocol support"
	52	depends on BT_HCIUART
d3a8eab0	53	select BITREVERSE
1da177e4	54	help
8ba8b4c0	55	BCSP (BlueCore Serial Protocol) is serial protocol for communication
1da177e4 LT	56	between Bluetooth device and host. This protocol is required for non
	57	USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	58	CF cards.
	59
	60	Say Y here to compile support for HCI BCSP protocol.
	61
b3190df6 SS	62	config BT_HCIUART_ATH3K
	63	bool "Atheros AR300x serial support"
	64	depends on BT_HCIUART
	65	help
	66	HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	67	communication between host and Atheros AR300x Bluetooth devices.
	68	This protocol enables AR300x chips to be enabled with
	69	power management support.
	70	Enable this if you have Atheros AR300x serial Bluetooth device.
	71
	72	Say Y here to compile support for HCI UART ATH3K protocol.
	73
166d2f6a OBC	74	config BT_HCIUART_LL
	75	bool "HCILL protocol support"
	76	depends on BT_HCIUART
	77	help
	78	HCILL (HCI Low Level) is a serial protocol for communication
	79	between Bluetooth device and host. This protocol is required for
	80	serial Bluetooth devices that are based on Texas Instruments'
	81	BRF chips.
	82
	83	Say Y here to compile support for HCILL protocol.
	84
7dec65c8 JH	85	config BT_HCIUART_3WIRE
	86	bool "Three-wire UART (H5) protocol support"
	87	depends on BT_HCIUART
	88	help
	89	The HCI Three-wire UART Transport Layer makes it possible to
	90	user the Bluetooth HCI over a serial port interface. The HCI
	91	Three-wire UART Transport Layer assumes that the UART
	92	communication may have bit errors, overrun errors or burst
	93	errors and thereby making CTS/RTS lines unnecessary.
	94
	95	Say Y here to compile support for Three-wire UART protocol.
	96
16e3887f MH	97	config BT_HCIUART_INTEL
	98	bool "Intel protocol support"
	99	depends on BT_HCIUART
	100	help
	101	The Intel protocol support enables Bluetooth HCI over serial
	102	port interface for Intel Bluetooth controllers.
	103
	104	Say Y here to compile support for Intel protocol.
	105
e9a2dd26 MH	106	config BT_HCIUART_BCM
	107	bool "Broadcom protocol support"
	108	depends on BT_HCIUART
	109	help
	110	The Broadcom protocol support enables Bluetooth HCI over serial
	111	port interface for Broadcom Bluetooth controllers.
	112
	113	Say Y here to compile support for Broadcom protocol.
	114
1da177e4 LT	115	config BT_HCIBCM203X
	116	tristate "HCI BCM203x USB driver"
	117	depends on USB
	118	select FW_LOADER
	119	help
	120	Bluetooth HCI BCM203x USB driver.
	121	This driver provides the firmware loading mechanism for the Broadcom
	122	Blutonium based devices.
	123
	124	Say Y here to compile support for HCI BCM203x devices into the
	125	kernel or say M to compile it as module (bcm203x).
	126
	127	config BT_HCIBPA10X
	128	tristate "HCI BPA10x USB driver"
	129	depends on USB
	130	help
	131	Bluetooth HCI BPA10x USB driver.
	132	This driver provides support for the Digianswer BPA 100/105 Bluetooth
	133	sniffer devices.
	134
	135	Say Y here to compile support for HCI BPA10x devices into the
	136	kernel or say M to compile it as module (bpa10x).
	137
	138	config BT_HCIBFUSB
	139	tristate "HCI BlueFRITZ! USB driver"
	140	depends on USB
	141	select FW_LOADER
	142	help
	143	Bluetooth HCI BlueFRITZ! USB driver.
	144	This driver provides support for Bluetooth USB devices with AVM
	145	interface:
	146	AVM BlueFRITZ! USB
	147
	148	Say Y here to compile support for HCI BFUSB devices into the
	149	kernel or say M to compile it as module (bfusb).
	150
	151	config BT_HCIDTL1
	152	tristate "HCI DTL1 (PC Card) driver"
	153	depends on PCMCIA
	154	help
	155	Bluetooth HCI DTL1 (PC Card) driver.
	156	This driver provides support for Bluetooth PCMCIA devices with
	157	Nokia DTL1 interface:
	158	Nokia Bluetooth Card
	159	Socket Bluetooth CF Card
	160
	161	Say Y here to compile support for HCI DTL1 devices into the
	162	kernel or say M to compile it as module (dtl1_cs).
	163
	164	config BT_HCIBT3C
	165	tristate "HCI BT3C (PC Card) driver"
	166	depends on PCMCIA
	167	select FW_LOADER
	168	help
	169	Bluetooth HCI BT3C (PC Card) driver.
	170	This driver provides support for Bluetooth PCMCIA devices with
	171	3Com BT3C interface:
	172	3Com Bluetooth Card (3CRWB6096)
	173	HP Bluetooth Card
	174
	175	Say Y here to compile support for HCI BT3C devices into the
	176	kernel or say M to compile it as module (bt3c_cs).
	177
	178	config BT_HCIBLUECARD
179	tristate "HCI BlueCard (PC Card) driver"
180	depends on PCMCIA
181	help
182	Bluetooth HCI BlueCard (PC Card) driver.
183	This driver provides support for Bluetooth PCMCIA devices with
184	Anycom BlueCard interface:
185	Anycom Bluetooth PC Card
186	Anycom Bluetooth CF Card
187
188	Say Y here to compile support for HCI BlueCard devices into the
189	kernel or say M to compile it as module (bluecard_cs).
190
191	config BT_HCIBTUART
192	tristate "HCI UART (PC Card) device driver"
193	depends on PCMCIA
194	help
195	Bluetooth HCI UART (PC Card) driver.
196	This driver provides support for Bluetooth PCMCIA devices with
197	an UART interface:
198	Xircom CreditCard Bluetooth Adapter
199	Xircom RealPort2 Bluetooth Adapter
200	Sphinx PICO Card
201	H-Soft blue+Card
202	Cyber-blue Compact Flash Card
203
204	Say Y here to compile support for HCI UART devices into the
205	kernel or say M to compile it as module (btuart_cs).
206
207	config BT_HCIVHCI
208	tristate "HCI VHCI (Virtual HCI device) driver"
209	help
210	Bluetooth Virtual HCI device driver.
211	This driver is required if you want to use HCI Emulation software.
212
213	Say Y here to compile support for virtual HCI devices into the
214	kernel or say M to compile it as module (hci_vhci).
215
132ff4e5 BZ	216	config BT_MRVL
132ff4e5 BZ	217	tristate "Marvell Bluetooth driver support"
132ff4e5 BZ	218	help
	219	The core driver to support Marvell Bluetooth devices.
	220
	221	This driver is required if you want to support
3907d558	222	Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897.
132ff4e5 BZ	223
	224	Say Y here to compile Marvell Bluetooth driver
	225	into the kernel or say M to compile it as module.
	226
789221ec BZ	227	config BT_MRVL_SDIO
	228	tristate "Marvell BT-over-SDIO driver"
	229	depends on BT_MRVL && MMC
e7a25f98	230	select FW_LOADER
dc759613	231	select WANT_DEV_COREDUMP
789221ec BZ	232	help
	233	The driver for Marvell Bluetooth chipsets with SDIO interface.
	234
	235	This driver is required if you want to use Marvell Bluetooth
3907d558	236	devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897
2ac654f7	237	chipsets are supported.
789221ec BZ	238
	239	Say Y here to compile support for Marvell BT-over-SDIO driver
	240	into the kernel or say M to compile it as module.
	241
9670d80a VK	242	config BT_ATH3K
	243	tristate "Atheros firmware download driver"
	244	depends on BT_HCIBTUSB
	245	select FW_LOADER
	246	help
	247	Bluetooth firmware download driver.
	248	This driver loads the firmware into the Atheros Bluetooth
	249	chipset.
1da177e4	250
9670d80a VK	251	Say Y here to compile support for "Atheros firmware download driver"
	252	into the kernel or say M to compile it as module (ath3k).
	253
363907af PS	254	config BT_WILINK
	255	tristate "Texas Instruments WiLink7 driver"
	256	depends on TI_ST
	257	help
	258	This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
	259	combo devices. This makes use of shared transport line discipline
	260	core driver to communicate with the BT core of the combo chip.
	261
	262	Say Y here to compile support for Texas Instrument's WiLink7 driver
22e8ee12 PM	263	into the kernel or say M to compile it as module (btwilink).
22e8ee12 PM	264
9670d80a	265	endmenu