IRQ: Typedef the IRQ handler function type
[deliverable/linux.git] / drivers / bluetooth / bluecard_cs.c
CommitLineData
1da177e4
LT
1/*
2 *
3 * Bluetooth driver for the Anycom BlueCard (LSE039/LSE041)
4 *
5 * Copyright (C) 2001-2002 Marcel Holtmann <marcel@holtmann.org>
6 *
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation;
11 *
12 * Software distributed under the License is distributed on an "AS
13 * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 * implied. See the License for the specific language governing
15 * rights and limitations under the License.
16 *
17 * The initial developer of the original code is David A. Hinds
18 * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
20 *
21 */
22
1da177e4
LT
23#include <linux/module.h>
24
25#include <linux/kernel.h>
26#include <linux/init.h>
27#include <linux/slab.h>
28#include <linux/types.h>
29#include <linux/sched.h>
30#include <linux/delay.h>
31#include <linux/timer.h>
32#include <linux/errno.h>
33#include <linux/ptrace.h>
34#include <linux/ioport.h>
35#include <linux/spinlock.h>
36#include <linux/moduleparam.h>
37#include <linux/wait.h>
38
39#include <linux/skbuff.h>
40#include <asm/io.h>
41
1da177e4
LT
42#include <pcmcia/cs_types.h>
43#include <pcmcia/cs.h>
44#include <pcmcia/cistpl.h>
45#include <pcmcia/ciscode.h>
46#include <pcmcia/ds.h>
47#include <pcmcia/cisreg.h>
48
49#include <net/bluetooth/bluetooth.h>
50#include <net/bluetooth/hci_core.h>
51
52
53
54/* ======================== Module parameters ======================== */
55
56
57MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
58MODULE_DESCRIPTION("Bluetooth driver for the Anycom BlueCard (LSE039/LSE041)");
59MODULE_LICENSE("GPL");
60
61
62
63/* ======================== Local structures ======================== */
64
65
66typedef struct bluecard_info_t {
fd238232 67 struct pcmcia_device *p_dev;
1da177e4
LT
68 dev_node_t node;
69
70 struct hci_dev *hdev;
71
72 spinlock_t lock; /* For serializing operations */
73 struct timer_list timer; /* For LED control */
74
75 struct sk_buff_head txq;
76 unsigned long tx_state;
77
78 unsigned long rx_state;
79 unsigned long rx_count;
80 struct sk_buff *rx_skb;
81
82 unsigned char ctrl_reg;
83 unsigned long hw_state; /* Status of the hardware and LED control */
84} bluecard_info_t;
85
86
15b99ac1 87static int bluecard_config(struct pcmcia_device *link);
fba395ee 88static void bluecard_release(struct pcmcia_device *link);
1da177e4 89
cc3b4866 90static void bluecard_detach(struct pcmcia_device *p_dev);
1da177e4 91
1da177e4
LT
92
93/* Default baud rate: 57600, 115200, 230400 or 460800 */
94#define DEFAULT_BAUD_RATE 230400
95
96
97/* Hardware states */
98#define CARD_READY 1
99#define CARD_HAS_PCCARD_ID 4
100#define CARD_HAS_POWER_LED 5
101#define CARD_HAS_ACTIVITY_LED 6
102
103/* Transmit states */
104#define XMIT_SENDING 1
105#define XMIT_WAKEUP 2
106#define XMIT_BUFFER_NUMBER 5 /* unset = buffer one, set = buffer two */
107#define XMIT_BUF_ONE_READY 6
108#define XMIT_BUF_TWO_READY 7
109#define XMIT_SENDING_READY 8
110
111/* Receiver states */
112#define RECV_WAIT_PACKET_TYPE 0
113#define RECV_WAIT_EVENT_HEADER 1
114#define RECV_WAIT_ACL_HEADER 2
115#define RECV_WAIT_SCO_HEADER 3
116#define RECV_WAIT_DATA 4
117
118/* Special packet types */
119#define PKT_BAUD_RATE_57600 0x80
120#define PKT_BAUD_RATE_115200 0x81
121#define PKT_BAUD_RATE_230400 0x82
122#define PKT_BAUD_RATE_460800 0x83
123
124
125/* These are the register offsets */
126#define REG_COMMAND 0x20
127#define REG_INTERRUPT 0x21
128#define REG_CONTROL 0x22
129#define REG_RX_CONTROL 0x24
130#define REG_CARD_RESET 0x30
131#define REG_LED_CTRL 0x30
132
133/* REG_COMMAND */
134#define REG_COMMAND_TX_BUF_ONE 0x01
135#define REG_COMMAND_TX_BUF_TWO 0x02
136#define REG_COMMAND_RX_BUF_ONE 0x04
137#define REG_COMMAND_RX_BUF_TWO 0x08
138#define REG_COMMAND_RX_WIN_ONE 0x00
139#define REG_COMMAND_RX_WIN_TWO 0x10
140
141/* REG_CONTROL */
142#define REG_CONTROL_BAUD_RATE_57600 0x00
143#define REG_CONTROL_BAUD_RATE_115200 0x01
144#define REG_CONTROL_BAUD_RATE_230400 0x02
145#define REG_CONTROL_BAUD_RATE_460800 0x03
146#define REG_CONTROL_RTS 0x04
147#define REG_CONTROL_BT_ON 0x08
148#define REG_CONTROL_BT_RESET 0x10
149#define REG_CONTROL_BT_RES_PU 0x20
150#define REG_CONTROL_INTERRUPT 0x40
151#define REG_CONTROL_CARD_RESET 0x80
152
153/* REG_RX_CONTROL */
154#define RTS_LEVEL_SHIFT_BITS 0x02
155
156
157
158/* ======================== LED handling routines ======================== */
159
160
161static void bluecard_activity_led_timeout(u_long arg)
162{
163 bluecard_info_t *info = (bluecard_info_t *)arg;
fd238232 164 unsigned int iobase = info->p_dev->io.BasePort1;
1da177e4
LT
165
166 if (!test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)))
167 return;
168
169 if (test_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state))) {
170 /* Disable activity LED */
171 outb(0x08 | 0x20, iobase + 0x30);
172 } else {
173 /* Disable power LED */
174 outb(0x00, iobase + 0x30);
175 }
176}
177
178
179static void bluecard_enable_activity_led(bluecard_info_t *info)
180{
fd238232 181 unsigned int iobase = info->p_dev->io.BasePort1;
1da177e4
LT
182
183 if (!test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)))
184 return;
185
186 if (test_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state))) {
187 /* Enable activity LED */
188 outb(0x10 | 0x40, iobase + 0x30);
189
190 /* Stop the LED after HZ/4 */
191 mod_timer(&(info->timer), jiffies + HZ / 4);
192 } else {
193 /* Enable power LED */
194 outb(0x08 | 0x20, iobase + 0x30);
195
196 /* Stop the LED after HZ/2 */
197 mod_timer(&(info->timer), jiffies + HZ / 2);
198 }
199}
200
201
202
203/* ======================== Interrupt handling ======================== */
204
205
206static int bluecard_write(unsigned int iobase, unsigned int offset, __u8 *buf, int len)
207{
208 int i, actual;
209
210 actual = (len > 15) ? 15 : len;
211
212 outb_p(actual, iobase + offset);
213
214 for (i = 0; i < actual; i++)
215 outb_p(buf[i], iobase + offset + i + 1);
216
217 return actual;
218}
219
220
221static void bluecard_write_wakeup(bluecard_info_t *info)
222{
223 if (!info) {
224 BT_ERR("Unknown device");
225 return;
226 }
227
228 if (!test_bit(XMIT_SENDING_READY, &(info->tx_state)))
229 return;
230
231 if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) {
232 set_bit(XMIT_WAKEUP, &(info->tx_state));
233 return;
234 }
235
236 do {
fd238232 237 register unsigned int iobase = info->p_dev->io.BasePort1;
1da177e4
LT
238 register unsigned int offset;
239 register unsigned char command;
240 register unsigned long ready_bit;
241 register struct sk_buff *skb;
242 register int len;
243
244 clear_bit(XMIT_WAKEUP, &(info->tx_state));
245
e2d40963 246 if (!pcmcia_dev_present(info->p_dev))
1da177e4
LT
247 return;
248
249 if (test_bit(XMIT_BUFFER_NUMBER, &(info->tx_state))) {
250 if (!test_bit(XMIT_BUF_TWO_READY, &(info->tx_state)))
251 break;
252 offset = 0x10;
253 command = REG_COMMAND_TX_BUF_TWO;
254 ready_bit = XMIT_BUF_TWO_READY;
255 } else {
256 if (!test_bit(XMIT_BUF_ONE_READY, &(info->tx_state)))
257 break;
258 offset = 0x00;
259 command = REG_COMMAND_TX_BUF_ONE;
260 ready_bit = XMIT_BUF_ONE_READY;
261 }
262
263 if (!(skb = skb_dequeue(&(info->txq))))
264 break;
265
0d48d939 266 if (bt_cb(skb)->pkt_type & 0x80) {
1da177e4
LT
267 /* Disable RTS */
268 info->ctrl_reg |= REG_CONTROL_RTS;
269 outb(info->ctrl_reg, iobase + REG_CONTROL);
270 }
271
272 /* Activate LED */
273 bluecard_enable_activity_led(info);
274
275 /* Send frame */
276 len = bluecard_write(iobase, offset, skb->data, skb->len);
277
278 /* Tell the FPGA to send the data */
279 outb_p(command, iobase + REG_COMMAND);
280
281 /* Mark the buffer as dirty */
282 clear_bit(ready_bit, &(info->tx_state));
283
0d48d939 284 if (bt_cb(skb)->pkt_type & 0x80) {
1da177e4
LT
285 DECLARE_WAIT_QUEUE_HEAD(wq);
286 DEFINE_WAIT(wait);
287
288 unsigned char baud_reg;
289
0d48d939 290 switch (bt_cb(skb)->pkt_type) {
1da177e4
LT
291 case PKT_BAUD_RATE_460800:
292 baud_reg = REG_CONTROL_BAUD_RATE_460800;
293 break;
294 case PKT_BAUD_RATE_230400:
295 baud_reg = REG_CONTROL_BAUD_RATE_230400;
296 break;
297 case PKT_BAUD_RATE_115200:
298 baud_reg = REG_CONTROL_BAUD_RATE_115200;
299 break;
300 case PKT_BAUD_RATE_57600:
301 /* Fall through... */
302 default:
303 baud_reg = REG_CONTROL_BAUD_RATE_57600;
304 break;
305 }
306
307 /* Wait until the command reaches the baseband */
308 prepare_to_wait(&wq, &wait, TASK_INTERRUPTIBLE);
309 schedule_timeout(HZ/10);
310 finish_wait(&wq, &wait);
311
312 /* Set baud on baseband */
313 info->ctrl_reg &= ~0x03;
314 info->ctrl_reg |= baud_reg;
315 outb(info->ctrl_reg, iobase + REG_CONTROL);
316
317 /* Enable RTS */
318 info->ctrl_reg &= ~REG_CONTROL_RTS;
319 outb(info->ctrl_reg, iobase + REG_CONTROL);
320
321 /* Wait before the next HCI packet can be send */
322 prepare_to_wait(&wq, &wait, TASK_INTERRUPTIBLE);
323 schedule_timeout(HZ);
324 finish_wait(&wq, &wait);
325 }
326
327 if (len == skb->len) {
328 kfree_skb(skb);
329 } else {
330 skb_pull(skb, len);
331 skb_queue_head(&(info->txq), skb);
332 }
333
334 info->hdev->stat.byte_tx += len;
335
336 /* Change buffer */
337 change_bit(XMIT_BUFFER_NUMBER, &(info->tx_state));
338
339 } while (test_bit(XMIT_WAKEUP, &(info->tx_state)));
340
341 clear_bit(XMIT_SENDING, &(info->tx_state));
342}
343
344
345static int bluecard_read(unsigned int iobase, unsigned int offset, __u8 *buf, int size)
346{
347 int i, n, len;
348
349 outb(REG_COMMAND_RX_WIN_ONE, iobase + REG_COMMAND);
350
351 len = inb(iobase + offset);
352 n = 0;
353 i = 1;
354
355 while (n < len) {
356
357 if (i == 16) {
358 outb(REG_COMMAND_RX_WIN_TWO, iobase + REG_COMMAND);
359 i = 0;
360 }
361
362 buf[n] = inb(iobase + offset + i);
363
364 n++;
365 i++;
366
367 }
368
369 return len;
370}
371
372
373static void bluecard_receive(bluecard_info_t *info, unsigned int offset)
374{
375 unsigned int iobase;
376 unsigned char buf[31];
377 int i, len;
378
379 if (!info) {
380 BT_ERR("Unknown device");
381 return;
382 }
383
fd238232 384 iobase = info->p_dev->io.BasePort1;
1da177e4
LT
385
386 if (test_bit(XMIT_SENDING_READY, &(info->tx_state)))
387 bluecard_enable_activity_led(info);
388
389 len = bluecard_read(iobase, offset, buf, sizeof(buf));
390
391 for (i = 0; i < len; i++) {
392
393 /* Allocate packet */
394 if (info->rx_skb == NULL) {
395 info->rx_state = RECV_WAIT_PACKET_TYPE;
396 info->rx_count = 0;
397 if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
398 BT_ERR("Can't allocate mem for new packet");
399 return;
400 }
401 }
402
403 if (info->rx_state == RECV_WAIT_PACKET_TYPE) {
404
405 info->rx_skb->dev = (void *) info->hdev;
0d48d939 406 bt_cb(info->rx_skb)->pkt_type = buf[i];
1da177e4 407
0d48d939 408 switch (bt_cb(info->rx_skb)->pkt_type) {
1da177e4
LT
409
410 case 0x00:
411 /* init packet */
412 if (offset != 0x00) {
413 set_bit(XMIT_BUF_ONE_READY, &(info->tx_state));
414 set_bit(XMIT_BUF_TWO_READY, &(info->tx_state));
415 set_bit(XMIT_SENDING_READY, &(info->tx_state));
416 bluecard_write_wakeup(info);
417 }
418
419 kfree_skb(info->rx_skb);
420 info->rx_skb = NULL;
421 break;
422
423 case HCI_EVENT_PKT:
424 info->rx_state = RECV_WAIT_EVENT_HEADER;
425 info->rx_count = HCI_EVENT_HDR_SIZE;
426 break;
427
428 case HCI_ACLDATA_PKT:
429 info->rx_state = RECV_WAIT_ACL_HEADER;
430 info->rx_count = HCI_ACL_HDR_SIZE;
431 break;
432
433 case HCI_SCODATA_PKT:
434 info->rx_state = RECV_WAIT_SCO_HEADER;
435 info->rx_count = HCI_SCO_HDR_SIZE;
436 break;
437
438 default:
439 /* unknown packet */
0d48d939 440 BT_ERR("Unknown HCI packet with type 0x%02x received", bt_cb(info->rx_skb)->pkt_type);
1da177e4
LT
441 info->hdev->stat.err_rx++;
442
443 kfree_skb(info->rx_skb);
444 info->rx_skb = NULL;
445 break;
446
447 }
448
449 } else {
450
451 *skb_put(info->rx_skb, 1) = buf[i];
452 info->rx_count--;
453
454 if (info->rx_count == 0) {
455
456 int dlen;
457 struct hci_event_hdr *eh;
458 struct hci_acl_hdr *ah;
459 struct hci_sco_hdr *sh;
460
461 switch (info->rx_state) {
462
463 case RECV_WAIT_EVENT_HEADER:
464 eh = (struct hci_event_hdr *)(info->rx_skb->data);
465 info->rx_state = RECV_WAIT_DATA;
466 info->rx_count = eh->plen;
467 break;
468
469 case RECV_WAIT_ACL_HEADER:
470 ah = (struct hci_acl_hdr *)(info->rx_skb->data);
471 dlen = __le16_to_cpu(ah->dlen);
472 info->rx_state = RECV_WAIT_DATA;
473 info->rx_count = dlen;
474 break;
475
476 case RECV_WAIT_SCO_HEADER:
477 sh = (struct hci_sco_hdr *)(info->rx_skb->data);
478 info->rx_state = RECV_WAIT_DATA;
479 info->rx_count = sh->dlen;
480 break;
481
482 case RECV_WAIT_DATA:
483 hci_recv_frame(info->rx_skb);
484 info->rx_skb = NULL;
485 break;
486
487 }
488
489 }
490
491 }
492
493
494 }
495
496 info->hdev->stat.byte_rx += len;
497}
498
499
500static irqreturn_t bluecard_interrupt(int irq, void *dev_inst, struct pt_regs *regs)
501{
502 bluecard_info_t *info = dev_inst;
503 unsigned int iobase;
504 unsigned char reg;
505
506 if (!info || !info->hdev) {
507 BT_ERR("Call of irq %d for unknown device", irq);
508 return IRQ_NONE;
509 }
510
511 if (!test_bit(CARD_READY, &(info->hw_state)))
512 return IRQ_HANDLED;
513
fd238232 514 iobase = info->p_dev->io.BasePort1;
1da177e4
LT
515
516 spin_lock(&(info->lock));
517
518 /* Disable interrupt */
519 info->ctrl_reg &= ~REG_CONTROL_INTERRUPT;
520 outb(info->ctrl_reg, iobase + REG_CONTROL);
521
522 reg = inb(iobase + REG_INTERRUPT);
523
524 if ((reg != 0x00) && (reg != 0xff)) {
525
526 if (reg & 0x04) {
527 bluecard_receive(info, 0x00);
528 outb(0x04, iobase + REG_INTERRUPT);
529 outb(REG_COMMAND_RX_BUF_ONE, iobase + REG_COMMAND);
530 }
531
532 if (reg & 0x08) {
533 bluecard_receive(info, 0x10);
534 outb(0x08, iobase + REG_INTERRUPT);
535 outb(REG_COMMAND_RX_BUF_TWO, iobase + REG_COMMAND);
536 }
537
538 if (reg & 0x01) {
539 set_bit(XMIT_BUF_ONE_READY, &(info->tx_state));
540 outb(0x01, iobase + REG_INTERRUPT);
541 bluecard_write_wakeup(info);
542 }
543
544 if (reg & 0x02) {
545 set_bit(XMIT_BUF_TWO_READY, &(info->tx_state));
546 outb(0x02, iobase + REG_INTERRUPT);
547 bluecard_write_wakeup(info);
548 }
549
550 }
551
552 /* Enable interrupt */
553 info->ctrl_reg |= REG_CONTROL_INTERRUPT;
554 outb(info->ctrl_reg, iobase + REG_CONTROL);
555
556 spin_unlock(&(info->lock));
557
558 return IRQ_HANDLED;
559}
560
561
562
563/* ======================== Device specific HCI commands ======================== */
564
565
566static int bluecard_hci_set_baud_rate(struct hci_dev *hdev, int baud)
567{
568 bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
569 struct sk_buff *skb;
570
571 /* Ericsson baud rate command */
572 unsigned char cmd[] = { HCI_COMMAND_PKT, 0x09, 0xfc, 0x01, 0x03 };
573
574 if (!(skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
575 BT_ERR("Can't allocate mem for new packet");
576 return -1;
577 }
578
579 switch (baud) {
580 case 460800:
581 cmd[4] = 0x00;
0d48d939 582 bt_cb(skb)->pkt_type = PKT_BAUD_RATE_460800;
1da177e4
LT
583 break;
584 case 230400:
585 cmd[4] = 0x01;
0d48d939 586 bt_cb(skb)->pkt_type = PKT_BAUD_RATE_230400;
1da177e4
LT
587 break;
588 case 115200:
589 cmd[4] = 0x02;
0d48d939 590 bt_cb(skb)->pkt_type = PKT_BAUD_RATE_115200;
1da177e4
LT
591 break;
592 case 57600:
593 /* Fall through... */
594 default:
595 cmd[4] = 0x03;
0d48d939 596 bt_cb(skb)->pkt_type = PKT_BAUD_RATE_57600;
1da177e4
LT
597 break;
598 }
599
600 memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd));
601
602 skb_queue_tail(&(info->txq), skb);
603
604 bluecard_write_wakeup(info);
605
606 return 0;
607}
608
609
610
611/* ======================== HCI interface ======================== */
612
613
614static int bluecard_hci_flush(struct hci_dev *hdev)
615{
616 bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
617
618 /* Drop TX queue */
619 skb_queue_purge(&(info->txq));
620
621 return 0;
622}
623
624
625static int bluecard_hci_open(struct hci_dev *hdev)
626{
627 bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
fd238232 628 unsigned int iobase = info->p_dev->io.BasePort1;
1da177e4
LT
629
630 if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)))
631 bluecard_hci_set_baud_rate(hdev, DEFAULT_BAUD_RATE);
632
633 if (test_and_set_bit(HCI_RUNNING, &(hdev->flags)))
634 return 0;
635
636 if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) {
637 /* Enable LED */
638 outb(0x08 | 0x20, iobase + 0x30);
639 }
640
641 return 0;
642}
643
644
645static int bluecard_hci_close(struct hci_dev *hdev)
646{
647 bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
fd238232 648 unsigned int iobase = info->p_dev->io.BasePort1;
1da177e4
LT
649
650 if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags)))
651 return 0;
652
653 bluecard_hci_flush(hdev);
654
655 if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) {
656 /* Disable LED */
657 outb(0x00, iobase + 0x30);
658 }
659
660 return 0;
661}
662
663
664static int bluecard_hci_send_frame(struct sk_buff *skb)
665{
666 bluecard_info_t *info;
667 struct hci_dev *hdev = (struct hci_dev *)(skb->dev);
668
669 if (!hdev) {
670 BT_ERR("Frame for unknown HCI device (hdev=NULL)");
671 return -ENODEV;
672 }
673
674 info = (bluecard_info_t *)(hdev->driver_data);
675
0d48d939 676 switch (bt_cb(skb)->pkt_type) {
1da177e4
LT
677 case HCI_COMMAND_PKT:
678 hdev->stat.cmd_tx++;
679 break;
680 case HCI_ACLDATA_PKT:
681 hdev->stat.acl_tx++;
682 break;
683 case HCI_SCODATA_PKT:
684 hdev->stat.sco_tx++;
685 break;
686 };
687
688 /* Prepend skb with frame type */
0d48d939 689 memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
1da177e4
LT
690 skb_queue_tail(&(info->txq), skb);
691
692 bluecard_write_wakeup(info);
693
694 return 0;
695}
696
697
698static void bluecard_hci_destruct(struct hci_dev *hdev)
699{
700}
701
702
703static int bluecard_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg)
704{
705 return -ENOIOCTLCMD;
706}
707
708
709
710/* ======================== Card services HCI interaction ======================== */
711
712
713static int bluecard_open(bluecard_info_t *info)
714{
fd238232 715 unsigned int iobase = info->p_dev->io.BasePort1;
1da177e4
LT
716 struct hci_dev *hdev;
717 unsigned char id;
718
719 spin_lock_init(&(info->lock));
720
721 init_timer(&(info->timer));
722 info->timer.function = &bluecard_activity_led_timeout;
723 info->timer.data = (u_long)info;
724
725 skb_queue_head_init(&(info->txq));
726
727 info->rx_state = RECV_WAIT_PACKET_TYPE;
728 info->rx_count = 0;
729 info->rx_skb = NULL;
730
731 /* Initialize HCI device */
732 hdev = hci_alloc_dev();
733 if (!hdev) {
734 BT_ERR("Can't allocate HCI device");
735 return -ENOMEM;
736 }
737
738 info->hdev = hdev;
739
740 hdev->type = HCI_PCCARD;
741 hdev->driver_data = info;
27d35284 742 SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
1da177e4
LT
743
744 hdev->open = bluecard_hci_open;
745 hdev->close = bluecard_hci_close;
746 hdev->flush = bluecard_hci_flush;
747 hdev->send = bluecard_hci_send_frame;
748 hdev->destruct = bluecard_hci_destruct;
749 hdev->ioctl = bluecard_hci_ioctl;
750
751 hdev->owner = THIS_MODULE;
752
753 id = inb(iobase + 0x30);
754
755 if ((id & 0x0f) == 0x02)
756 set_bit(CARD_HAS_PCCARD_ID, &(info->hw_state));
757
758 if (id & 0x10)
759 set_bit(CARD_HAS_POWER_LED, &(info->hw_state));
760
761 if (id & 0x20)
762 set_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state));
763
764 /* Reset card */
765 info->ctrl_reg = REG_CONTROL_BT_RESET | REG_CONTROL_CARD_RESET;
766 outb(info->ctrl_reg, iobase + REG_CONTROL);
767
768 /* Turn FPGA off */
769 outb(0x80, iobase + 0x30);
770
771 /* Wait some time */
772 msleep(10);
773
774 /* Turn FPGA on */
775 outb(0x00, iobase + 0x30);
776
777 /* Activate card */
778 info->ctrl_reg = REG_CONTROL_BT_ON | REG_CONTROL_BT_RES_PU;
779 outb(info->ctrl_reg, iobase + REG_CONTROL);
780
781 /* Enable interrupt */
782 outb(0xff, iobase + REG_INTERRUPT);
783 info->ctrl_reg |= REG_CONTROL_INTERRUPT;
784 outb(info->ctrl_reg, iobase + REG_CONTROL);
785
786 if ((id & 0x0f) == 0x03) {
787 /* Disable RTS */
788 info->ctrl_reg |= REG_CONTROL_RTS;
789 outb(info->ctrl_reg, iobase + REG_CONTROL);
790
791 /* Set baud rate */
792 info->ctrl_reg |= 0x03;
793 outb(info->ctrl_reg, iobase + REG_CONTROL);
794
795 /* Enable RTS */
796 info->ctrl_reg &= ~REG_CONTROL_RTS;
797 outb(info->ctrl_reg, iobase + REG_CONTROL);
798
799 set_bit(XMIT_BUF_ONE_READY, &(info->tx_state));
800 set_bit(XMIT_BUF_TWO_READY, &(info->tx_state));
801 set_bit(XMIT_SENDING_READY, &(info->tx_state));
802 }
803
804 /* Start the RX buffers */
805 outb(REG_COMMAND_RX_BUF_ONE, iobase + REG_COMMAND);
806 outb(REG_COMMAND_RX_BUF_TWO, iobase + REG_COMMAND);
807
808 /* Signal that the hardware is ready */
809 set_bit(CARD_READY, &(info->hw_state));
810
811 /* Drop TX queue */
812 skb_queue_purge(&(info->txq));
813
814 /* Control the point at which RTS is enabled */
815 outb((0x0f << RTS_LEVEL_SHIFT_BITS) | 1, iobase + REG_RX_CONTROL);
816
817 /* Timeout before it is safe to send the first HCI packet */
818 msleep(1250);
819
820 /* Register HCI device */
821 if (hci_register_dev(hdev) < 0) {
822 BT_ERR("Can't register HCI device");
823 info->hdev = NULL;
824 hci_free_dev(hdev);
825 return -ENODEV;
826 }
827
828 return 0;
829}
830
831
832static int bluecard_close(bluecard_info_t *info)
833{
fd238232 834 unsigned int iobase = info->p_dev->io.BasePort1;
1da177e4
LT
835 struct hci_dev *hdev = info->hdev;
836
837 if (!hdev)
838 return -ENODEV;
839
840 bluecard_hci_close(hdev);
841
842 clear_bit(CARD_READY, &(info->hw_state));
843
844 /* Reset card */
845 info->ctrl_reg = REG_CONTROL_BT_RESET | REG_CONTROL_CARD_RESET;
846 outb(info->ctrl_reg, iobase + REG_CONTROL);
847
848 /* Turn FPGA off */
849 outb(0x80, iobase + 0x30);
850
851 if (hci_unregister_dev(hdev) < 0)
852 BT_ERR("Can't unregister HCI device %s", hdev->name);
853
854 hci_free_dev(hdev);
855
856 return 0;
857}
858
15b99ac1 859static int bluecard_probe(struct pcmcia_device *link)
1da177e4
LT
860{
861 bluecard_info_t *info;
1da177e4
LT
862
863 /* Create new info device */
089b1dbb 864 info = kzalloc(sizeof(*info), GFP_KERNEL);
1da177e4 865 if (!info)
f8cfa618 866 return -ENOMEM;
1da177e4 867
fba395ee 868 info->p_dev = link;
1da177e4
LT
869 link->priv = info;
870
871 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
872 link->io.NumPorts1 = 8;
873 link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
874 link->irq.IRQInfo1 = IRQ_LEVEL_ID;
875
876 link->irq.Handler = bluecard_interrupt;
877 link->irq.Instance = info;
878
879 link->conf.Attributes = CONF_ENABLE_IRQ;
1da177e4
LT
880 link->conf.IntType = INT_MEMORY_AND_IO;
881
15b99ac1 882 return bluecard_config(link);
1da177e4
LT
883}
884
885
fba395ee 886static void bluecard_detach(struct pcmcia_device *link)
1da177e4
LT
887{
888 bluecard_info_t *info = link->priv;
1da177e4 889
e2d40963 890 bluecard_release(link);
1da177e4
LT
891 kfree(info);
892}
893
894
fba395ee 895static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
1da177e4
LT
896{
897 int i;
898
899 i = pcmcia_get_first_tuple(handle, tuple);
900 if (i != CS_SUCCESS)
901 return CS_NO_MORE_ITEMS;
902
903 i = pcmcia_get_tuple_data(handle, tuple);
904 if (i != CS_SUCCESS)
905 return i;
906
907 return pcmcia_parse_tuple(handle, tuple, parse);
908}
909
15b99ac1 910static int bluecard_config(struct pcmcia_device *link)
1da177e4 911{
1da177e4
LT
912 bluecard_info_t *info = link->priv;
913 tuple_t tuple;
914 u_short buf[256];
915 cisparse_t parse;
1da177e4
LT
916 int i, n, last_ret, last_fn;
917
918 tuple.TupleData = (cisdata_t *)buf;
919 tuple.TupleOffset = 0;
920 tuple.TupleDataMax = 255;
921 tuple.Attributes = 0;
922
923 /* Get configuration register information */
924 tuple.DesiredTuple = CISTPL_CONFIG;
fba395ee 925 last_ret = first_tuple(link, &tuple, &parse);
1da177e4
LT
926 if (last_ret != CS_SUCCESS) {
927 last_fn = ParseTuple;
928 goto cs_failed;
929 }
930 link->conf.ConfigBase = parse.config.base;
931 link->conf.Present = parse.config.rmask[0];
932
1da177e4
LT
933 link->conf.ConfigIndex = 0x20;
934 link->io.NumPorts1 = 64;
935 link->io.IOAddrLines = 6;
936
937 for (n = 0; n < 0x400; n += 0x40) {
938 link->io.BasePort1 = n ^ 0x300;
fba395ee 939 i = pcmcia_request_io(link, &link->io);
1da177e4
LT
940 if (i == CS_SUCCESS)
941 break;
942 }
943
944 if (i != CS_SUCCESS) {
fba395ee 945 cs_error(link, RequestIO, i);
1da177e4
LT
946 goto failed;
947 }
948
fba395ee 949 i = pcmcia_request_irq(link, &link->irq);
1da177e4 950 if (i != CS_SUCCESS) {
fba395ee 951 cs_error(link, RequestIRQ, i);
1da177e4
LT
952 link->irq.AssignedIRQ = 0;
953 }
954
fba395ee 955 i = pcmcia_request_configuration(link, &link->conf);
1da177e4 956 if (i != CS_SUCCESS) {
fba395ee 957 cs_error(link, RequestConfiguration, i);
1da177e4
LT
958 goto failed;
959 }
960
961 if (bluecard_open(info) != 0)
962 goto failed;
963
964 strcpy(info->node.dev_name, info->hdev->name);
fd238232 965 link->dev_node = &info->node;
1da177e4 966
15b99ac1 967 return 0;
1da177e4
LT
968
969cs_failed:
fba395ee 970 cs_error(link, last_fn, last_ret);
1da177e4
LT
971
972failed:
973 bluecard_release(link);
15b99ac1 974 return -ENODEV;
1da177e4
LT
975}
976
977
fba395ee 978static void bluecard_release(struct pcmcia_device *link)
1da177e4
LT
979{
980 bluecard_info_t *info = link->priv;
981
e2d40963 982 bluecard_close(info);
1da177e4
LT
983
984 del_timer(&(info->timer));
985
fba395ee 986 pcmcia_disable_device(link);
1da177e4
LT
987}
988
7f70cb6d
DB
989static struct pcmcia_device_id bluecard_ids[] = {
990 PCMCIA_DEVICE_PROD_ID12("BlueCard", "LSE041", 0xbaf16fbf, 0x657cc15e),
991 PCMCIA_DEVICE_PROD_ID12("BTCFCARD", "LSE139", 0xe3987764, 0x2524b59c),
992 PCMCIA_DEVICE_PROD_ID12("WSS", "LSE039", 0x0a0736ec, 0x24e6dfab),
993 PCMCIA_DEVICE_NULL
994};
995MODULE_DEVICE_TABLE(pcmcia, bluecard_ids);
996
1da177e4
LT
997static struct pcmcia_driver bluecard_driver = {
998 .owner = THIS_MODULE,
999 .drv = {
1000 .name = "bluecard_cs",
1001 },
15b99ac1 1002 .probe = bluecard_probe,
cc3b4866 1003 .remove = bluecard_detach,
7f70cb6d 1004 .id_table = bluecard_ids,
1da177e4
LT
1005};
1006
1007static int __init init_bluecard_cs(void)
1008{
1009 return pcmcia_register_driver(&bluecard_driver);
1010}
1011
1012
1013static void __exit exit_bluecard_cs(void)
1014{
1015 pcmcia_unregister_driver(&bluecard_driver);
1da177e4
LT
1016}
1017
1018module_init(init_bluecard_cs);
1019module_exit(exit_bluecard_cs);
This page took 0.205533 seconds and 5 git commands to generate.