projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Char: rocket, switch sleep_on to completion
[deliverable/linux.git] / drivers / char / rocket.c
CommitLineData
1da177e4
LT		 1/*
2 * RocketPort device driver for Linux
3 *
4 * Written by Theodore Ts'o, 1995, 1996, 1997, 1998, 1999, 2000.
5 *
6 * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2003 by Comtrol, Inc.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of the
11 * License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 */
22
23/*
24 * Kernel Synchronization:
25 *
26 * This driver has 2 kernel control paths - exception handlers (calls into the driver
27 * from user mode) and the timer bottom half (tasklet). This is a polled driver, interrupts
28 * are not used.
29 *
30 * Critical data:
31 * - rp_table[], accessed through passed "info" pointers, is a global (static) array of
32 * serial port state information and the xmit_buf circular buffer. Protected by
33 * a per port spinlock.
34 * - xmit_flags[], an array of ints indexed by line (port) number, indicating that there
35 * is data to be transmitted. Protected by atomic bit operations.
36 * - rp_num_ports, int indicating number of open ports, protected by atomic operations.
37 *
38 * rp_write() and rp_write_char() functions use a per port semaphore to protect against
39 * simultaneous access to the same port by more than one process.
40 */
41
42/****** Defines ******/
43#ifdef PCI_NUM_RESOURCES
44#define PCI_BASE_ADDRESS(dev, r) ((dev)->resource[r].start)
45#else
46#define PCI_BASE_ADDRESS(dev, r) ((dev)->base_address[r])
47#endif
48
49#define ROCKET_PARANOIA_CHECK
50#define ROCKET_DISABLE_SIMUSAGE
51
52#undef ROCKET_SOFT_FLOW
53#undef ROCKET_DEBUG_OPEN
54#undef ROCKET_DEBUG_INTR
55#undef ROCKET_DEBUG_WRITE
56#undef ROCKET_DEBUG_FLOW
57#undef ROCKET_DEBUG_THROTTLE
58#undef ROCKET_DEBUG_WAIT_UNTIL_SENT
59#undef ROCKET_DEBUG_RECEIVE
60#undef ROCKET_DEBUG_HANGUP
61#undef REV_PCI_ORDER
62#undef ROCKET_DEBUG_IO
63
64#define POLL_PERIOD HZ/100 /* Polling period .01 seconds (10ms) */
65
66/****** Kernel includes ******/
67
1da177e4
LT		 68#include <linux/module.h>
69#include <linux/errno.h>
70#include <linux/major.h>
71#include <linux/kernel.h>
72#include <linux/signal.h>
73#include <linux/slab.h>
74#include <linux/mm.h>
75#include <linux/sched.h>
76#include <linux/timer.h>
77#include <linux/interrupt.h>
78#include <linux/tty.h>
79#include <linux/tty_driver.h>
80#include <linux/tty_flip.h>
81#include <linux/string.h>
82#include <linux/fcntl.h>
83#include <linux/ptrace.h>
69f545ea 84#include <linux/mutex.h>
1da177e4
LT		 85#include <linux/ioport.h>
86#include <linux/delay.h>
8cf5a8c5 87#include <linux/completion.h>
1da177e4
LT		 88#include <linux/wait.h>
89#include <linux/pci.h>
90#include <asm/uaccess.h>
91#include <asm/atomic.h>
92#include <linux/bitops.h>
93#include <linux/spinlock.h>
1da177e4
LT		 94#include <linux/init.h>
95
96/****** RocketPort includes ******/
97
98#include "rocket_int.h"
99#include "rocket.h"
100
101#define ROCKET_VERSION "2.09"
102#define ROCKET_DATE "12-June-2003"
103
104/****** RocketPort Local Variables ******/
105
40565f19
JS		 106static void rp_do_poll(unsigned long dummy);
107
1da177e4
LT		 108static struct tty_driver *rocket_driver;
109
110static struct rocket_version driver_version = {
111 ROCKET_VERSION, ROCKET_DATE
112};
113
114static struct r_port *rp_table[MAX_RP_PORTS]; /* The main repository of serial port state information. */
115static unsigned int xmit_flags[NUM_BOARDS]; /* Bit significant, indicates port had data to transmit. */
116 /* eg. Bit 0 indicates port 0 has xmit data, ... */
117static atomic_t rp_num_ports_open; /* Number of serial ports open */
40565f19 118static DEFINE_TIMER(rocket_timer, rp_do_poll, 0, 0);
1da177e4
LT		 119
120static unsigned long board1; /* ISA addresses, retrieved from rocketport.conf */
121static unsigned long board2;
122static unsigned long board3;
123static unsigned long board4;
124static unsigned long controller;
125static int support_low_speed;
126static unsigned long modem1;
127static unsigned long modem2;
128static unsigned long modem3;
129static unsigned long modem4;
130static unsigned long pc104_1[8];
131static unsigned long pc104_2[8];
132static unsigned long pc104_3[8];
133static unsigned long pc104_4[8];
134static unsigned long *pc104[4] = { pc104_1, pc104_2, pc104_3, pc104_4 };
135
136static int rp_baud_base[NUM_BOARDS]; /* Board config info (Someday make a per-board structure) */
137static unsigned long rcktpt_io_addr[NUM_BOARDS];
138static int rcktpt_type[NUM_BOARDS];
139static int is_PCI[NUM_BOARDS];
140static rocketModel_t rocketModel[NUM_BOARDS];
141static int max_board;
142
143/*
144 * The following arrays define the interrupt bits corresponding to each AIOP.
145 * These bits are different between the ISA and regular PCI boards and the
146 * Universal PCI boards.
147 */
148
149static Word_t aiop_intr_bits[AIOP_CTL_SIZE] = {
150 AIOP_INTR_BIT_0,
151 AIOP_INTR_BIT_1,
152 AIOP_INTR_BIT_2,
153 AIOP_INTR_BIT_3
154};
155
156static Word_t upci_aiop_intr_bits[AIOP_CTL_SIZE] = {
157 UPCI_AIOP_INTR_BIT_0,
158 UPCI_AIOP_INTR_BIT_1,
159 UPCI_AIOP_INTR_BIT_2,
160 UPCI_AIOP_INTR_BIT_3
161};
162
f15313bf
AB		 163static Byte_t RData[RDATASIZE] = {
164 0x00, 0x09, 0xf6, 0x82,
165 0x02, 0x09, 0x86, 0xfb,
166 0x04, 0x09, 0x00, 0x0a,
167 0x06, 0x09, 0x01, 0x0a,
168 0x08, 0x09, 0x8a, 0x13,
169 0x0a, 0x09, 0xc5, 0x11,
170 0x0c, 0x09, 0x86, 0x85,
171 0x0e, 0x09, 0x20, 0x0a,
172 0x10, 0x09, 0x21, 0x0a,
173 0x12, 0x09, 0x41, 0xff,
174 0x14, 0x09, 0x82, 0x00,
175 0x16, 0x09, 0x82, 0x7b,
176 0x18, 0x09, 0x8a, 0x7d,
177 0x1a, 0x09, 0x88, 0x81,
178 0x1c, 0x09, 0x86, 0x7a,
179 0x1e, 0x09, 0x84, 0x81,
180 0x20, 0x09, 0x82, 0x7c,
181 0x22, 0x09, 0x0a, 0x0a
182};
183
184static Byte_t RRegData[RREGDATASIZE] = {
185 0x00, 0x09, 0xf6, 0x82, /* 00: Stop Rx processor */
186 0x08, 0x09, 0x8a, 0x13, /* 04: Tx software flow control */
187 0x0a, 0x09, 0xc5, 0x11, /* 08: XON char */
188 0x0c, 0x09, 0x86, 0x85, /* 0c: XANY */
189 0x12, 0x09, 0x41, 0xff, /* 10: Rx mask char */
190 0x14, 0x09, 0x82, 0x00, /* 14: Compare/Ignore #0 */
191 0x16, 0x09, 0x82, 0x7b, /* 18: Compare #1 */
192 0x18, 0x09, 0x8a, 0x7d, /* 1c: Compare #2 */
193 0x1a, 0x09, 0x88, 0x81, /* 20: Interrupt #1 */
194 0x1c, 0x09, 0x86, 0x7a, /* 24: Ignore/Replace #1 */
195 0x1e, 0x09, 0x84, 0x81, /* 28: Interrupt #2 */
196 0x20, 0x09, 0x82, 0x7c, /* 2c: Ignore/Replace #2 */
197 0x22, 0x09, 0x0a, 0x0a /* 30: Rx FIFO Enable */
198};
199
200static CONTROLLER_T sController[CTL_SIZE] = {
201 {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
202 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
203 {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
204 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
205 {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
206 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
207 {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
208 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}}
209};
210
211static Byte_t sBitMapClrTbl[8] = {
212 0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f
213};
214
215static Byte_t sBitMapSetTbl[8] = {
216 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80
217};
218
219static int sClockPrescale = 0x14;
220
1da177e4
LT		 221/*
222 * Line number is the ttySIx number (x), the Minor number. We
223 * assign them sequentially, starting at zero. The following
224 * array keeps track of the line number assigned to a given board/aiop/channel.
225 */
226static unsigned char lineNumbers[MAX_RP_PORTS];
227static unsigned long nextLineNumber;
228
229/***** RocketPort Static Prototypes *********/
230static int __init init_ISA(int i);
231static void rp_wait_until_sent(struct tty_struct *tty, int timeout);
232static void rp_flush_buffer(struct tty_struct *tty);
233static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model);
234static unsigned char GetLineNumber(int ctrl, int aiop, int ch);
235static unsigned char SetLineNumber(int ctrl, int aiop, int ch);
236static void rp_start(struct tty_struct *tty);
f15313bf
AB		 237static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum,
238 int ChanNum);
239static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode);
240static void sFlushRxFIFO(CHANNEL_T * ChP);
241static void sFlushTxFIFO(CHANNEL_T * ChP);
242static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags);
243static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags);
244static void sModemReset(CONTROLLER_T * CtlP, int chan, int on);
245static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on);
246static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data);
247static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
248 ByteIO_t * AiopIOList, int AiopIOListSize,
249 WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
250 int PeriodicOnly, int altChanRingIndicator,
251 int UPCIRingInd);
252static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO,
253 ByteIO_t * AiopIOList, int AiopIOListSize,
254 int IRQNum, Byte_t Frequency, int PeriodicOnly);
255static int sReadAiopID(ByteIO_t io);
256static int sReadAiopNumChan(WordIO_t io);
1da177e4 257
1da177e4
LT		 258MODULE_AUTHOR("Theodore Ts'o");
259MODULE_DESCRIPTION("Comtrol RocketPort driver");
260module_param(board1, ulong, 0);
261MODULE_PARM_DESC(board1, "I/O port for (ISA) board #1");
262module_param(board2, ulong, 0);
263MODULE_PARM_DESC(board2, "I/O port for (ISA) board #2");
264module_param(board3, ulong, 0);
265MODULE_PARM_DESC(board3, "I/O port for (ISA) board #3");
266module_param(board4, ulong, 0);
267MODULE_PARM_DESC(board4, "I/O port for (ISA) board #4");
268module_param(controller, ulong, 0);
269MODULE_PARM_DESC(controller, "I/O port for (ISA) rocketport controller");
270module_param(support_low_speed, bool, 0);
271MODULE_PARM_DESC(support_low_speed, "1 means support 50 baud, 0 means support 460400 baud");
272module_param(modem1, ulong, 0);
273MODULE_PARM_DESC(modem1, "1 means (ISA) board #1 is a RocketModem");
274module_param(modem2, ulong, 0);
275MODULE_PARM_DESC(modem2, "1 means (ISA) board #2 is a RocketModem");
276module_param(modem3, ulong, 0);
277MODULE_PARM_DESC(modem3, "1 means (ISA) board #3 is a RocketModem");
278module_param(modem4, ulong, 0);
279MODULE_PARM_DESC(modem4, "1 means (ISA) board #4 is a RocketModem");
280module_param_array(pc104_1, ulong, NULL, 0);
281MODULE_PARM_DESC(pc104_1, "set interface types for ISA(PC104) board #1 (e.g. pc104_1=232,232,485,485,...");
282module_param_array(pc104_2, ulong, NULL, 0);
283MODULE_PARM_DESC(pc104_2, "set interface types for ISA(PC104) board #2 (e.g. pc104_2=232,232,485,485,...");
284module_param_array(pc104_3, ulong, NULL, 0);
285MODULE_PARM_DESC(pc104_3, "set interface types for ISA(PC104) board #3 (e.g. pc104_3=232,232,485,485,...");
286module_param_array(pc104_4, ulong, NULL, 0);
287MODULE_PARM_DESC(pc104_4, "set interface types for ISA(PC104) board #4 (e.g. pc104_4=232,232,485,485,...");
288
d269cdd0 289static int rp_init(void);
1da177e4
LT		 290static void rp_cleanup_module(void);
291
292module_init(rp_init);
293module_exit(rp_cleanup_module);
294
1da177e4 295
1da177e4 296MODULE_LICENSE("Dual BSD/GPL");
1da177e4
LT		 297
298/*************************************************************************/
299/* Module code starts here */
300
301static inline int rocket_paranoia_check(struct r_port *info,
302 const char *routine)
303{
304#ifdef ROCKET_PARANOIA_CHECK
305 if (!info)
306 return 1;
307 if (info->magic != RPORT_MAGIC) {
308 printk(KERN_INFO "Warning: bad magic number for rocketport struct in %s\n",
309 routine);
310 return 1;
311 }
312#endif
313 return 0;
314}
315
316
317/* Serial port receive data function. Called (from timer poll) when an AIOPIC signals
318 * that receive data is present on a serial port. Pulls data from FIFO, moves it into the
319 * tty layer.
320 */
321static void rp_do_receive(struct r_port *info,
322 struct tty_struct *tty,
323 CHANNEL_t * cp, unsigned int ChanStatus)
324{
325 unsigned int CharNStat;
cc44a817
PF		 326 int ToRecv, wRecv, space;
327 unsigned char *cbuf;
1da177e4
LT		 328
329 ToRecv = sGetRxCnt(cp);
1da177e4 330#ifdef ROCKET_DEBUG_INTR
cc44a817 331 printk(KERN_INFO "rp_do_receive(%d)...", ToRecv);
1da177e4 332#endif
cc44a817
PF		 333 if (ToRecv == 0)
334 return;
33f0f88f 335
1da177e4
LT		 336 /*
337 * if status indicates there are errored characters in the
338 * FIFO, then enter status mode (a word in FIFO holds
339 * character and status).
340 */
341 if (ChanStatus & (RXFOVERFL | RXBREAK | RXFRAME | RXPARITY)) {
342 if (!(ChanStatus & STATMODE)) {
343#ifdef ROCKET_DEBUG_RECEIVE
344 printk(KERN_INFO "Entering STATMODE...");
345#endif
346 ChanStatus |= STATMODE;
347 sEnRxStatusMode(cp);
348 }
349 }
350
351 /*
352 * if we previously entered status mode, then read down the
353 * FIFO one word at a time, pulling apart the character and
354 * the status. Update error counters depending on status
355 */
356 if (ChanStatus & STATMODE) {
357#ifdef ROCKET_DEBUG_RECEIVE
358 printk(KERN_INFO "Ignore %x, read %x...", info->ignore_status_mask,
359 info->read_status_mask);
360#endif
361 while (ToRecv) {
cc44a817
PF		 362 char flag;
363
1da177e4
LT		 364 CharNStat = sInW(sGetTxRxDataIO(cp));
365#ifdef ROCKET_DEBUG_RECEIVE
366 printk(KERN_INFO "%x...", CharNStat);
367#endif
368 if (CharNStat & STMBREAKH)
369 CharNStat &= ~(STMFRAMEH | STMPARITYH);
370 if (CharNStat & info->ignore_status_mask) {
371 ToRecv--;
372 continue;
373 }
374 CharNStat &= info->read_status_mask;
375 if (CharNStat & STMBREAKH)
cc44a817 376 flag = TTY_BREAK;
1da177e4 377 else if (CharNStat & STMPARITYH)
cc44a817 378 flag = TTY_PARITY;
1da177e4 379 else if (CharNStat & STMFRAMEH)
cc44a817 380 flag = TTY_FRAME;
1da177e4 381 else if (CharNStat & STMRCVROVRH)
cc44a817 382 flag = TTY_OVERRUN;
1da177e4 383 else
cc44a817
PF		 384 flag = TTY_NORMAL;
385 tty_insert_flip_char(tty, CharNStat & 0xff, flag);
1da177e4
LT		 386 ToRecv--;
387 }
388
389 /*
390 * after we've emptied the FIFO in status mode, turn
391 * status mode back off
392 */
393 if (sGetRxCnt(cp) == 0) {
394#ifdef ROCKET_DEBUG_RECEIVE
395 printk(KERN_INFO "Status mode off.\n");
396#endif
397 sDisRxStatusMode(cp);
398 }
399 } else {
400 /*
401 * we aren't in status mode, so read down the FIFO two
402 * characters at time by doing repeated word IO
403 * transfer.
404 */
cc44a817
PF		 405 space = tty_prepare_flip_string(tty, &cbuf, ToRecv);
406 if (space < ToRecv) {
407#ifdef ROCKET_DEBUG_RECEIVE
408 printk(KERN_INFO "rp_do_receive:insufficient space ToRecv=%d space=%d\n", ToRecv, space);
409#endif
410 if (space <= 0)
411 return;
412 ToRecv = space;
413 }
1da177e4
LT		 414 wRecv = ToRecv >> 1;
415 if (wRecv)
416 sInStrW(sGetTxRxDataIO(cp), (unsigned short *) cbuf, wRecv);
417 if (ToRecv & 1)
418 cbuf[ToRecv - 1] = sInB(sGetTxRxDataIO(cp));
1da177e4
LT		 419 }
420 /* Push the data up to the tty layer */
cc44a817 421 tty_flip_buffer_push(tty);
1da177e4
LT		 422}
423
424/*
425 * Serial port transmit data function. Called from the timer polling loop as a
426 * result of a bit set in xmit_flags[], indicating data (from the tty layer) is ready
427 * to be sent out the serial port. Data is buffered in rp_table[line].xmit_buf, it is
428 * moved to the port's xmit FIFO. *info is critical data, protected by spinlocks.
429 */
430static void rp_do_transmit(struct r_port *info)
431{
432 int c;
433 CHANNEL_t *cp = &info->channel;
434 struct tty_struct *tty;
435 unsigned long flags;
436
437#ifdef ROCKET_DEBUG_INTR
438 printk(KERN_INFO "rp_do_transmit ");
439#endif
440 if (!info)
441 return;
442 if (!info->tty) {
443 printk(KERN_INFO "rp: WARNING rp_do_transmit called with info->tty==NULL\n");
444 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
445 return;
446 }
447
448 spin_lock_irqsave(&info->slock, flags);
449 tty = info->tty;
450 info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
451
452 /* Loop sending data to FIFO until done or FIFO full */
453 while (1) {
454 if (tty->stopped || tty->hw_stopped)
455 break;
456 c = min(info->xmit_fifo_room, min(info->xmit_cnt, XMIT_BUF_SIZE - info->xmit_tail));
457 if (c <= 0 || info->xmit_fifo_room <= 0)
458 break;
459 sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) (info->xmit_buf + info->xmit_tail), c / 2);
460 if (c & 1)
461 sOutB(sGetTxRxDataIO(cp), info->xmit_buf[info->xmit_tail + c - 1]);
462 info->xmit_tail += c;
463 info->xmit_tail &= XMIT_BUF_SIZE - 1;
464 info->xmit_cnt -= c;
465 info->xmit_fifo_room -= c;
466#ifdef ROCKET_DEBUG_INTR
467 printk(KERN_INFO "tx %d chars...", c);
468#endif
469 }
470
471 if (info->xmit_cnt == 0)
472 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
473
474 if (info->xmit_cnt < WAKEUP_CHARS) {
475 tty_wakeup(tty);
1da177e4
LT		 476#ifdef ROCKETPORT_HAVE_POLL_WAIT
477 wake_up_interruptible(&tty->poll_wait);
478#endif
479 }
480
481 spin_unlock_irqrestore(&info->slock, flags);
482
483#ifdef ROCKET_DEBUG_INTR
484 printk(KERN_INFO "(%d,%d,%d,%d)...", info->xmit_cnt, info->xmit_head,
485 info->xmit_tail, info->xmit_fifo_room);
486#endif
487}
488
489/*
490 * Called when a serial port signals it has read data in it's RX FIFO.
491 * It checks what interrupts are pending and services them, including
492 * receiving serial data.
493 */
494static void rp_handle_port(struct r_port *info)
495{
496 CHANNEL_t *cp;
497 struct tty_struct *tty;
498 unsigned int IntMask, ChanStatus;
499
500 if (!info)
501 return;
502
503 if ((info->flags & ROCKET_INITIALIZED) == 0) {
504 printk(KERN_INFO "rp: WARNING: rp_handle_port called with info->flags & NOT_INIT\n");
505 return;
506 }
507 if (!info->tty) {
508 printk(KERN_INFO "rp: WARNING: rp_handle_port called with info->tty==NULL\n");
509 return;
510 }
511 cp = &info->channel;
512 tty = info->tty;
513
514 IntMask = sGetChanIntID(cp) & info->intmask;
515#ifdef ROCKET_DEBUG_INTR
516 printk(KERN_INFO "rp_interrupt %02x...", IntMask);
517#endif
518 ChanStatus = sGetChanStatus(cp);
519 if (IntMask & RXF_TRIG) { /* Rx FIFO trigger level */
520 rp_do_receive(info, tty, cp, ChanStatus);
521 }
522 if (IntMask & DELTA_CD) { /* CD change */
523#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_INTR) || defined(ROCKET_DEBUG_HANGUP))
524 printk(KERN_INFO "ttyR%d CD now %s...", info->line,
525 (ChanStatus & CD_ACT) ? "on" : "off");
526#endif
527 if (!(ChanStatus & CD_ACT) && info->cd_status) {
528#ifdef ROCKET_DEBUG_HANGUP
529 printk(KERN_INFO "CD drop, calling hangup.\n");
530#endif
531 tty_hangup(tty);
532 }
533 info->cd_status = (ChanStatus & CD_ACT) ? 1 : 0;
534 wake_up_interruptible(&info->open_wait);
535 }
536#ifdef ROCKET_DEBUG_INTR
537 if (IntMask & DELTA_CTS) { /* CTS change */
538 printk(KERN_INFO "CTS change...\n");
539 }
540 if (IntMask & DELTA_DSR) { /* DSR change */
541 printk(KERN_INFO "DSR change...\n");
542 }
543#endif
544}
545
546/*
547 * The top level polling routine. Repeats every 1/100 HZ (10ms).
548 */
549static void rp_do_poll(unsigned long dummy)
550{
551 CONTROLLER_t *ctlp;
552 int ctrl, aiop, ch, line, i;
553 unsigned int xmitmask;
554 unsigned int CtlMask;
555 unsigned char AiopMask;
556 Word_t bit;
557
558 /* Walk through all the boards (ctrl's) */
559 for (ctrl = 0; ctrl < max_board; ctrl++) {
560 if (rcktpt_io_addr[ctrl] <= 0)
561 continue;
562
563 /* Get a ptr to the board's control struct */
564 ctlp = sCtlNumToCtlPtr(ctrl);
565
566 /* Get the interupt status from the board */
567#ifdef CONFIG_PCI
568 if (ctlp->BusType == isPCI)
569 CtlMask = sPCIGetControllerIntStatus(ctlp);
570 else
571#endif
572 CtlMask = sGetControllerIntStatus(ctlp);
573
574 /* Check if any AIOP read bits are set */
575 for (aiop = 0; CtlMask; aiop++) {
576 bit = ctlp->AiopIntrBits[aiop];
577 if (CtlMask & bit) {
578 CtlMask &= ~bit;
579 AiopMask = sGetAiopIntStatus(ctlp, aiop);
580
581 /* Check if any port read bits are set */
582 for (ch = 0; AiopMask; AiopMask >>= 1, ch++) {
583 if (AiopMask & 1) {
584
585 /* Get the line number (/dev/ttyRx number). */
586 /* Read the data from the port. */
587 line = GetLineNumber(ctrl, aiop, ch);
588 rp_handle_port(rp_table[line]);
589 }
590 }
591 }
592 }
593
594 xmitmask = xmit_flags[ctrl];
595
596 /*
597 * xmit_flags contains bit-significant flags, indicating there is data
598 * to xmit on the port. Bit 0 is port 0 on this board, bit 1 is port
599 * 1, ... (32 total possible). The variable i has the aiop and ch
600 * numbers encoded in it (port 0-7 are aiop0, 8-15 are aiop1, etc).
601 */
602 if (xmitmask) {
603 for (i = 0; i < rocketModel[ctrl].numPorts; i++) {
604 if (xmitmask & (1 << i)) {
605 aiop = (i & 0x18) >> 3;
606 ch = i & 0x07;
607 line = GetLineNumber(ctrl, aiop, ch);
608 rp_do_transmit(rp_table[line]);
609 }
610 }
611 }
612 }
613
614 /*
615 * Reset the timer so we get called at the next clock tick (10ms).
616 */
617 if (atomic_read(&rp_num_ports_open))
618 mod_timer(&rocket_timer, jiffies + POLL_PERIOD);
619}
620
621/*
622 * Initializes the r_port structure for a port, as well as enabling the port on
623 * the board.
624 * Inputs: board, aiop, chan numbers
625 */
626static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev)
627{
628 unsigned rocketMode;
629 struct r_port *info;
630 int line;
631 CONTROLLER_T *ctlp;
632
633 /* Get the next available line number */
634 line = SetLineNumber(board, aiop, chan);
635
636 ctlp = sCtlNumToCtlPtr(board);
637
638 /* Get a r_port struct for the port, fill it in and save it globally, indexed by line number */
dd00cc48 639 info = kzalloc(sizeof (struct r_port), GFP_KERNEL);
1da177e4
LT		 640 if (!info) {
641 printk(KERN_INFO "Couldn't allocate info struct for line #%d\n", line);
642 return;
643 }
1da177e4
LT		 644
645 info->magic = RPORT_MAGIC;
646 info->line = line;
647 info->ctlp = ctlp;
648 info->board = board;
649 info->aiop = aiop;
650 info->chan = chan;
651 info->closing_wait = 3000;
652 info->close_delay = 50;
653 init_waitqueue_head(&info->open_wait);
8cf5a8c5 654 init_completion(&info->close_wait);
1da177e4
LT		 655 info->flags &= ~ROCKET_MODE_MASK;
656 switch (pc104[board][line]) {
657 case 422:
658 info->flags |= ROCKET_MODE_RS422;
659 break;
660 case 485:
661 info->flags |= ROCKET_MODE_RS485;
662 break;
663 case 232:
664 default:
665 info->flags |= ROCKET_MODE_RS232;
666 break;
667 }
668
669 info->intmask = RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR;
670 if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) {
671 printk(KERN_INFO "RocketPort sInitChan(%d, %d, %d) failed!\n", board, aiop, chan);
672 kfree(info);
673 return;
674 }
675
676 rocketMode = info->flags & ROCKET_MODE_MASK;
677
678 if ((info->flags & ROCKET_RTS_TOGGLE) || (rocketMode == ROCKET_MODE_RS485))
679 sEnRTSToggle(&info->channel);
680 else
681 sDisRTSToggle(&info->channel);
682
683 if (ctlp->boardType == ROCKET_TYPE_PC104) {
684 switch (rocketMode) {
685 case ROCKET_MODE_RS485:
686 sSetInterfaceMode(&info->channel, InterfaceModeRS485);
687 break;
688 case ROCKET_MODE_RS422:
689 sSetInterfaceMode(&info->channel, InterfaceModeRS422);
690 break;
691 case ROCKET_MODE_RS232:
692 default:
693 if (info->flags & ROCKET_RTS_TOGGLE)
694 sSetInterfaceMode(&info->channel, InterfaceModeRS232T);
695 else
696 sSetInterfaceMode(&info->channel, InterfaceModeRS232);
697 break;
698 }
699 }
700 spin_lock_init(&info->slock);
69f545ea 701 mutex_init(&info->write_mtx);
1da177e4
LT		 702 rp_table[line] = info;
703 if (pci_dev)
704 tty_register_device(rocket_driver, line, &pci_dev->dev);
705}
706
707/*
708 * Configures a rocketport port according to its termio settings. Called from
709 * user mode into the driver (exception handler). *info CD manipulation is spinlock protected.
710 */
711static void configure_r_port(struct r_port *info,
606d099c 712 struct ktermios *old_termios)
1da177e4
LT		 713{
714 unsigned cflag;
715 unsigned long flags;
716 unsigned rocketMode;
717 int bits, baud, divisor;
718 CHANNEL_t *cp;
719
720 if (!info->tty || !info->tty->termios)
721 return;
722 cp = &info->channel;
723 cflag = info->tty->termios->c_cflag;
724
725 /* Byte size and parity */
726 if ((cflag & CSIZE) == CS8) {
727 sSetData8(cp);
728 bits = 10;
729 } else {
730 sSetData7(cp);
731 bits = 9;
732 }
733 if (cflag & CSTOPB) {
734 sSetStop2(cp);
735 bits++;
736 } else {
737 sSetStop1(cp);
738 }
739
740 if (cflag & PARENB) {
741 sEnParity(cp);
742 bits++;
743 if (cflag & PARODD) {
744 sSetOddParity(cp);
745 } else {
746 sSetEvenParity(cp);
747 }
748 } else {
749 sDisParity(cp);
750 }
751
752 /* baud rate */
753 baud = tty_get_baud_rate(info->tty);
754 if (!baud)
755 baud = 9600;
756 divisor = ((rp_baud_base[info->board] + (baud >> 1)) / baud) - 1;
757 if ((divisor >= 8192 || divisor < 0) && old_termios) {
758 info->tty->termios->c_cflag &= ~CBAUD;
759 info->tty->termios->c_cflag |=
760 (old_termios->c_cflag & CBAUD);
761 baud = tty_get_baud_rate(info->tty);
762 if (!baud)
763 baud = 9600;
764 divisor = (rp_baud_base[info->board] / baud) - 1;
765 }
766 if (divisor >= 8192 || divisor < 0) {
767 baud = 9600;
768 divisor = (rp_baud_base[info->board] / baud) - 1;
769 }
770 info->cps = baud / bits;
771 sSetBaud(cp, divisor);
772
773 if (cflag & CRTSCTS) {
774 info->intmask |= DELTA_CTS;
775 sEnCTSFlowCtl(cp);
776 } else {
777 info->intmask &= ~DELTA_CTS;
778 sDisCTSFlowCtl(cp);
779 }
780 if (cflag & CLOCAL) {
781 info->intmask &= ~DELTA_CD;
782 } else {
783 spin_lock_irqsave(&info->slock, flags);
784 if (sGetChanStatus(cp) & CD_ACT)
785 info->cd_status = 1;
786 else
787 info->cd_status = 0;
788 info->intmask |= DELTA_CD;
789 spin_unlock_irqrestore(&info->slock, flags);
790 }
791
792 /*
793 * Handle software flow control in the board
794 */
795#ifdef ROCKET_SOFT_FLOW
796 if (I_IXON(info->tty)) {
797 sEnTxSoftFlowCtl(cp);
798 if (I_IXANY(info->tty)) {
799 sEnIXANY(cp);
800 } else {
801 sDisIXANY(cp);
802 }
803 sSetTxXONChar(cp, START_CHAR(info->tty));
804 sSetTxXOFFChar(cp, STOP_CHAR(info->tty));
805 } else {
806 sDisTxSoftFlowCtl(cp);
807 sDisIXANY(cp);
808 sClrTxXOFF(cp);
809 }
810#endif
811
812 /*
813 * Set up ignore/read mask words
814 */
815 info->read_status_mask = STMRCVROVRH | 0xFF;
816 if (I_INPCK(info->tty))
817 info->read_status_mask |= STMFRAMEH | STMPARITYH;
818 if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
819 info->read_status_mask |= STMBREAKH;
820
821 /*
822 * Characters to ignore
823 */
824 info->ignore_status_mask = 0;
825 if (I_IGNPAR(info->tty))
826 info->ignore_status_mask |= STMFRAMEH | STMPARITYH;
827 if (I_IGNBRK(info->tty)) {
828 info->ignore_status_mask |= STMBREAKH;
829 /*
830 * If we're ignoring parity and break indicators,
831 * ignore overruns too. (For real raw support).
832 */
833 if (I_IGNPAR(info->tty))
834 info->ignore_status_mask |= STMRCVROVRH;
835 }
836
837 rocketMode = info->flags & ROCKET_MODE_MASK;
838
839 if ((info->flags & ROCKET_RTS_TOGGLE)
840 || (rocketMode == ROCKET_MODE_RS485))
841 sEnRTSToggle(cp);
842 else
843 sDisRTSToggle(cp);
844
845 sSetRTS(&info->channel);
846
847 if (cp->CtlP->boardType == ROCKET_TYPE_PC104) {
848 switch (rocketMode) {
849 case ROCKET_MODE_RS485:
850 sSetInterfaceMode(cp, InterfaceModeRS485);
851 break;
852 case ROCKET_MODE_RS422:
853 sSetInterfaceMode(cp, InterfaceModeRS422);
854 break;
855 case ROCKET_MODE_RS232:
856 default:
857 if (info->flags & ROCKET_RTS_TOGGLE)
858 sSetInterfaceMode(cp, InterfaceModeRS232T);
859 else
860 sSetInterfaceMode(cp, InterfaceModeRS232);
861 break;
862 }
863 }
864}
865
866/* info->count is considered critical, protected by spinlocks. */
867static int block_til_ready(struct tty_struct *tty, struct file *filp,
868 struct r_port *info)
869{
870 DECLARE_WAITQUEUE(wait, current);
871 int retval;
872 int do_clocal = 0, extra_count = 0;
873 unsigned long flags;
874
875 /*
876 * If the device is in the middle of being closed, then block
877 * until it's done, and then try again.
878 */
879 if (tty_hung_up_p(filp))
880 return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
881 if (info->flags & ROCKET_CLOSING) {
8cf5a8c5
JS		 882 if (wait_for_completion_interruptible(&info->close_wait))
883 return -ERESTARTSYS;
1da177e4
LT		 884 return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
885 }
886
887 /*
888 * If non-blocking mode is set, or the port is not enabled,
889 * then make the check up front and then exit.
890 */
891 if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) {
892 info->flags |= ROCKET_NORMAL_ACTIVE;
893 return 0;
894 }
895 if (tty->termios->c_cflag & CLOCAL)
896 do_clocal = 1;
897
898 /*
899 * Block waiting for the carrier detect and the line to become free. While we are in
900 * this loop, info->count is dropped by one, so that rp_close() knows when to free things.
901 * We restore it upon exit, either normal or abnormal.
902 */
903 retval = 0;
904 add_wait_queue(&info->open_wait, &wait);
905#ifdef ROCKET_DEBUG_OPEN
906 printk(KERN_INFO "block_til_ready before block: ttyR%d, count = %d\n", info->line, info->count);
907#endif
908 spin_lock_irqsave(&info->slock, flags);
909
910#ifdef ROCKET_DISABLE_SIMUSAGE
911 info->flags |= ROCKET_NORMAL_ACTIVE;
912#else
913 if (!tty_hung_up_p(filp)) {
914 extra_count = 1;
915 info->count--;
916 }
917#endif
918 info->blocked_open++;
919
920 spin_unlock_irqrestore(&info->slock, flags);
921
922 while (1) {
923 if (tty->termios->c_cflag & CBAUD) {
924 sSetDTR(&info->channel);
925 sSetRTS(&info->channel);
926 }
927 set_current_state(TASK_INTERRUPTIBLE);
928 if (tty_hung_up_p(filp) || !(info->flags & ROCKET_INITIALIZED)) {
929 if (info->flags & ROCKET_HUP_NOTIFY)
930 retval = -EAGAIN;
931 else
932 retval = -ERESTARTSYS;
933 break;
934 }
935 if (!(info->flags & ROCKET_CLOSING) && (do_clocal || (sGetChanStatusLo(&info->channel) & CD_ACT)))
936 break;
937 if (signal_pending(current)) {
938 retval = -ERESTARTSYS;
939 break;
940 }
941#ifdef ROCKET_DEBUG_OPEN
942 printk(KERN_INFO "block_til_ready blocking: ttyR%d, count = %d, flags=0x%0x\n",
943 info->line, info->count, info->flags);
944#endif
945 schedule(); /* Don't hold spinlock here, will hang PC */
946 }
cc0a8fbb 947 __set_current_state(TASK_RUNNING);
1da177e4
LT		 948 remove_wait_queue(&info->open_wait, &wait);
949
950 spin_lock_irqsave(&info->slock, flags);
951
952 if (extra_count)
953 info->count++;
954 info->blocked_open--;
955
956 spin_unlock_irqrestore(&info->slock, flags);
957
958#ifdef ROCKET_DEBUG_OPEN
959 printk(KERN_INFO "block_til_ready after blocking: ttyR%d, count = %d\n",
960 info->line, info->count);
961#endif
962 if (retval)
963 return retval;
964 info->flags |= ROCKET_NORMAL_ACTIVE;
965 return 0;
966}
967
968/*
969 * Exception handler that opens a serial port. Creates xmit_buf storage, fills in
970 * port's r_port struct. Initializes the port hardware.
971 */
972static int rp_open(struct tty_struct *tty, struct file *filp)
973{
974 struct r_port *info;
975 int line = 0, retval;
976 CHANNEL_t *cp;
977 unsigned long page;
978
979 line = TTY_GET_LINE(tty);
980 if ((line < 0) || (line >= MAX_RP_PORTS) || ((info = rp_table[line]) == NULL))
981 return -ENXIO;
982
983 page = __get_free_page(GFP_KERNEL);
984 if (!page)
985 return -ENOMEM;
986
987 if (info->flags & ROCKET_CLOSING) {
8cf5a8c5 988 retval = wait_for_completion_interruptible(&info->close_wait);
1da177e4 989 free_page(page);
8cf5a8c5
JS		 990 if (retval)
991 return retval;
1da177e4
LT		 992 return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
993 }
994
995 /*
996 * We must not sleep from here until the port is marked fully in use.
997 */
998 if (info->xmit_buf)
999 free_page(page);
1000 else
1001 info->xmit_buf = (unsigned char *) page;
1002
1003 tty->driver_data = info;
1004 info->tty = tty;
1005
1006 if (info->count++ == 0) {
1007 atomic_inc(&rp_num_ports_open);
1008
1009#ifdef ROCKET_DEBUG_OPEN
1010 printk(KERN_INFO "rocket mod++ = %d...", atomic_read(&rp_num_ports_open));
1011#endif
1012 }
1013#ifdef ROCKET_DEBUG_OPEN
1014 printk(KERN_INFO "rp_open ttyR%d, count=%d\n", info->line, info->count);
1015#endif
1016
1017 /*
1018 * Info->count is now 1; so it's safe to sleep now.
1019 */
1da177e4
LT		 1020 if ((info->flags & ROCKET_INITIALIZED) == 0) {
1021 cp = &info->channel;
1022 sSetRxTrigger(cp, TRIG_1);
1023 if (sGetChanStatus(cp) & CD_ACT)
1024 info->cd_status = 1;
1025 else
1026 info->cd_status = 0;
1027 sDisRxStatusMode(cp);
1028 sFlushRxFIFO(cp);
1029 sFlushTxFIFO(cp);
1030
1031 sEnInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
1032 sSetRxTrigger(cp, TRIG_1);
1033
1034 sGetChanStatus(cp);
1035 sDisRxStatusMode(cp);
1036 sClrTxXOFF(cp);
1037
1038 sDisCTSFlowCtl(cp);
1039 sDisTxSoftFlowCtl(cp);
1040
1041 sEnRxFIFO(cp);
1042 sEnTransmit(cp);
1043
1044 info->flags |= ROCKET_INITIALIZED;
1045
1046 /*
1047 * Set up the tty->alt_speed kludge
1048 */
1049 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
1050 info->tty->alt_speed = 57600;
1051 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
1052 info->tty->alt_speed = 115200;
1053 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
1054 info->tty->alt_speed = 230400;
1055 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
1056 info->tty->alt_speed = 460800;
1057
1058 configure_r_port(info, NULL);
1059 if (tty->termios->c_cflag & CBAUD) {
1060 sSetDTR(cp);
1061 sSetRTS(cp);
1062 }
1063 }
1064 /* Starts (or resets) the maint polling loop */
1065 mod_timer(&rocket_timer, jiffies + POLL_PERIOD);
1066
1067 retval = block_til_ready(tty, filp, info);
1068 if (retval) {
1069#ifdef ROCKET_DEBUG_OPEN
1070 printk(KERN_INFO "rp_open returning after block_til_ready with %d\n", retval);
1071#endif
1072 return retval;
1073 }
1074 return 0;
1075}
1076
1077/*
1078 * Exception handler that closes a serial port. info->count is considered critical.
1079 */
1080static void rp_close(struct tty_struct *tty, struct file *filp)
1081{
1082 struct r_port *info = (struct r_port *) tty->driver_data;
1083 unsigned long flags;
1084 int timeout;
1085 CHANNEL_t *cp;
1086
1087 if (rocket_paranoia_check(info, "rp_close"))
1088 return;
1089
1090#ifdef ROCKET_DEBUG_OPEN
1091 printk(KERN_INFO "rp_close ttyR%d, count = %d\n", info->line, info->count);
1092#endif
1093
1094 if (tty_hung_up_p(filp))
1095 return;
1096 spin_lock_irqsave(&info->slock, flags);
1097
1098 if ((tty->count == 1) && (info->count != 1)) {
1099 /*
1100 * Uh, oh. tty->count is 1, which means that the tty
1101 * structure will be freed. Info->count should always
1102 * be one in these conditions. If it's greater than
1103 * one, we've got real problems, since it means the
1104 * serial port won't be shutdown.
1105 */
1106 printk(KERN_INFO "rp_close: bad serial port count; tty->count is 1, "
1107 "info->count is %d\n", info->count);
1108 info->count = 1;
1109 }
1110 if (--info->count < 0) {
1111 printk(KERN_INFO "rp_close: bad serial port count for ttyR%d: %d\n",
1112 info->line, info->count);
1113 info->count = 0;
1114 }
1115 if (info->count) {
1116 spin_unlock_irqrestore(&info->slock, flags);
1117 return;
1118 }
1119 info->flags |= ROCKET_CLOSING;
1120 spin_unlock_irqrestore(&info->slock, flags);
1121
1122 cp = &info->channel;
1123
1124 /*
1125 * Notify the line discpline to only process XON/XOFF characters
1126 */
1127 tty->closing = 1;
1128
1129 /*
1130 * If transmission was throttled by the application request,
1131 * just flush the xmit buffer.
1132 */
1133 if (tty->flow_stopped)
1134 rp_flush_buffer(tty);
1135
1136 /*
1137 * Wait for the transmit buffer to clear
1138 */
1139 if (info->closing_wait != ROCKET_CLOSING_WAIT_NONE)
1140 tty_wait_until_sent(tty, info->closing_wait);
1141 /*
1142 * Before we drop DTR, make sure the UART transmitter
1143 * has completely drained; this is especially
1144 * important if there is a transmit FIFO!
1145 */
1146 timeout = (sGetTxCnt(cp) + 1) * HZ / info->cps;
1147 if (timeout == 0)
1148 timeout = 1;
1149 rp_wait_until_sent(tty, timeout);
1150 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1151
1152 sDisTransmit(cp);
1153 sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
1154 sDisCTSFlowCtl(cp);
1155 sDisTxSoftFlowCtl(cp);
1156 sClrTxXOFF(cp);
1157 sFlushRxFIFO(cp);
1158 sFlushTxFIFO(cp);
1159 sClrRTS(cp);
1160 if (C_HUPCL(tty))
1161 sClrDTR(cp);
1162
1163 if (TTY_DRIVER_FLUSH_BUFFER_EXISTS(tty))
1164 TTY_DRIVER_FLUSH_BUFFER(tty);
1165
1166 tty_ldisc_flush(tty);
1167
1168 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1169
1170 if (info->blocked_open) {
1171 if (info->close_delay) {
1172 msleep_interruptible(jiffies_to_msecs(info->close_delay));
1173 }
1174 wake_up_interruptible(&info->open_wait);
1175 } else {
1176 if (info->xmit_buf) {
1177 free_page((unsigned long) info->xmit_buf);
1178 info->xmit_buf = NULL;
1179 }
1180 }
1181 info->flags &= ~(ROCKET_INITIALIZED | ROCKET_CLOSING | ROCKET_NORMAL_ACTIVE);
1182 tty->closing = 0;
8cf5a8c5 1183 complete_all(&info->close_wait);
1da177e4
LT		 1184 atomic_dec(&rp_num_ports_open);
1185
1186#ifdef ROCKET_DEBUG_OPEN
1187 printk(KERN_INFO "rocket mod-- = %d...", atomic_read(&rp_num_ports_open));
1188 printk(KERN_INFO "rp_close ttyR%d complete shutdown\n", info->line);
1189#endif
1190
1191}
1192
1193static void rp_set_termios(struct tty_struct *tty,
606d099c 1194 struct ktermios *old_termios)
1da177e4
LT		 1195{
1196 struct r_port *info = (struct r_port *) tty->driver_data;
1197 CHANNEL_t *cp;
1198 unsigned cflag;
1199
1200 if (rocket_paranoia_check(info, "rp_set_termios"))
1201 return;
1202
1203 cflag = tty->termios->c_cflag;
1204
1205 if (cflag == old_termios->c_cflag)
1206 return;
1207
1208 /*
1209 * This driver doesn't support CS5 or CS6
1210 */
1211 if (((cflag & CSIZE) == CS5) || ((cflag & CSIZE) == CS6))
1212 tty->termios->c_cflag =
1213 ((cflag & ~CSIZE) | (old_termios->c_cflag & CSIZE));
1214
1215 configure_r_port(info, old_termios);
1216
1217 cp = &info->channel;
1218
1219 /* Handle transition to B0 status */
1220 if ((old_termios->c_cflag & CBAUD) && !(tty->termios->c_cflag & CBAUD)) {
1221 sClrDTR(cp);
1222 sClrRTS(cp);
1223 }
1224
1225 /* Handle transition away from B0 status */
1226 if (!(old_termios->c_cflag & CBAUD) && (tty->termios->c_cflag & CBAUD)) {
1227 if (!tty->hw_stopped || !(tty->termios->c_cflag & CRTSCTS))
1228 sSetRTS(cp);
1229 sSetDTR(cp);
1230 }
1231
1232 if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) {
1233 tty->hw_stopped = 0;
1234 rp_start(tty);
1235 }
1236}
1237
1238static void rp_break(struct tty_struct *tty, int break_state)
1239{
1240 struct r_port *info = (struct r_port *) tty->driver_data;
1241 unsigned long flags;
1242
1243 if (rocket_paranoia_check(info, "rp_break"))
1244 return;
1245
1246 spin_lock_irqsave(&info->slock, flags);
1247 if (break_state == -1)
1248 sSendBreak(&info->channel);
1249 else
1250 sClrBreak(&info->channel);
1251 spin_unlock_irqrestore(&info->slock, flags);
1252}
1253
1254/*
1255 * sGetChanRI used to be a macro in rocket_int.h. When the functionality for
1256 * the UPCI boards was added, it was decided to make this a function because
1257 * the macro was getting too complicated. All cases except the first one
1258 * (UPCIRingInd) are taken directly from the original macro.
1259 */
1260static int sGetChanRI(CHANNEL_T * ChP)
1261{
1262 CONTROLLER_t *CtlP = ChP->CtlP;
1263 int ChanNum = ChP->ChanNum;
1264 int RingInd = 0;
1265
1266 if (CtlP->UPCIRingInd)
1267 RingInd = !(sInB(CtlP->UPCIRingInd) & sBitMapSetTbl[ChanNum]);
1268 else if (CtlP->AltChanRingIndicator)
1269 RingInd = sInB((ByteIO_t) (ChP->ChanStat + 8)) & DSR_ACT;
1270 else if (CtlP->boardType == ROCKET_TYPE_PC104)
1271 RingInd = !(sInB(CtlP->AiopIO[3]) & sBitMapSetTbl[ChanNum]);
1272
1273 return RingInd;
1274}
1275
1276/********************************************************************************************/
1277/* Here are the routines used by rp_ioctl. These are all called from exception handlers. */
1278
1279/*
1280 * Returns the state of the serial modem control lines. These next 2 functions
1281 * are the way kernel versions > 2.5 handle modem control lines rather than IOCTLs.
1282 */
1283static int rp_tiocmget(struct tty_struct *tty, struct file *file)
1284{
1285 struct r_port *info = (struct r_port *)tty->driver_data;
1286 unsigned int control, result, ChanStatus;
1287
1288 ChanStatus = sGetChanStatusLo(&info->channel);
1289 control = info->channel.TxControl[3];
1290 result = ((control & SET_RTS) ? TIOCM_RTS : 0) |
1291 ((control & SET_DTR) ? TIOCM_DTR : 0) |
1292 ((ChanStatus & CD_ACT) ? TIOCM_CAR : 0) |
1293 (sGetChanRI(&info->channel) ? TIOCM_RNG : 0) |
1294 ((ChanStatus & DSR_ACT) ? TIOCM_DSR : 0) |
1295 ((ChanStatus & CTS_ACT) ? TIOCM_CTS : 0);
1296
1297 return result;
1298}
1299
1300/*
1301 * Sets the modem control lines
1302 */
1303static int rp_tiocmset(struct tty_struct *tty, struct file *file,
1304 unsigned int set, unsigned int clear)
1305{
1306 struct r_port *info = (struct r_port *)tty->driver_data;
1307
1308 if (set & TIOCM_RTS)
1309 info->channel.TxControl[3] |= SET_RTS;
1310 if (set & TIOCM_DTR)
1311 info->channel.TxControl[3] |= SET_DTR;
1312 if (clear & TIOCM_RTS)
1313 info->channel.TxControl[3] &= ~SET_RTS;
1314 if (clear & TIOCM_DTR)
1315 info->channel.TxControl[3] &= ~SET_DTR;
1316
1317 sOutDW(info->channel.IndexAddr, *(DWord_t *) & (info->channel.TxControl[0]));
1318 return 0;
1319}
1320
1321static int get_config(struct r_port *info, struct rocket_config __user *retinfo)
1322{
1323 struct rocket_config tmp;
1324
1325 if (!retinfo)
1326 return -EFAULT;
1327 memset(&tmp, 0, sizeof (tmp));
1328 tmp.line = info->line;
1329 tmp.flags = info->flags;
1330 tmp.close_delay = info->close_delay;
1331 tmp.closing_wait = info->closing_wait;
1332 tmp.port = rcktpt_io_addr[(info->line >> 5) & 3];
1333
1334 if (copy_to_user(retinfo, &tmp, sizeof (*retinfo)))
1335 return -EFAULT;
1336 return 0;
1337}
1338
1339static int set_config(struct r_port *info, struct rocket_config __user *new_info)
1340{
1341 struct rocket_config new_serial;
1342
1343 if (copy_from_user(&new_serial, new_info, sizeof (new_serial)))
1344 return -EFAULT;
1345
1346 if (!capable(CAP_SYS_ADMIN))
1347 {
1348 if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK))
1349 return -EPERM;
1350 info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK));
1351 configure_r_port(info, NULL);
1352 return 0;
1353 }
1354
1355 info->flags = ((info->flags & ~ROCKET_FLAGS) | (new_serial.flags & ROCKET_FLAGS));
1356 info->close_delay = new_serial.close_delay;
1357 info->closing_wait = new_serial.closing_wait;
1358
1359 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
1360 info->tty->alt_speed = 57600;
1361 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
1362 info->tty->alt_speed = 115200;
1363 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
1364 info->tty->alt_speed = 230400;
1365 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
1366 info->tty->alt_speed = 460800;
1367
1368 configure_r_port(info, NULL);
1369 return 0;
1370}
1371
1372/*
1373 * This function fills in a rocket_ports struct with information
1374 * about what boards/ports are in the system. This info is passed
1375 * to user space. See setrocket.c where the info is used to create
1376 * the /dev/ttyRx ports.
1377 */
1378static int get_ports(struct r_port *info, struct rocket_ports __user *retports)
1379{
1380 struct rocket_ports tmp;
1381 int board;
1382
1383 if (!retports)
1384 return -EFAULT;
1385 memset(&tmp, 0, sizeof (tmp));
1386 tmp.tty_major = rocket_driver->major;
1387
1388 for (board = 0; board < 4; board++) {
1389 tmp.rocketModel[board].model = rocketModel[board].model;
1390 strcpy(tmp.rocketModel[board].modelString, rocketModel[board].modelString);
1391 tmp.rocketModel[board].numPorts = rocketModel[board].numPorts;
1392 tmp.rocketModel[board].loadrm2 = rocketModel[board].loadrm2;
1393 tmp.rocketModel[board].startingPortNumber = rocketModel[board].startingPortNumber;
1394 }
1395 if (copy_to_user(retports, &tmp, sizeof (*retports)))
1396 return -EFAULT;
1397 return 0;
1398}
1399
1400static int reset_rm2(struct r_port *info, void __user *arg)
1401{
1402 int reset;
1403
1404 if (copy_from_user(&reset, arg, sizeof (int)))
1405 return -EFAULT;
1406 if (reset)
1407 reset = 1;
1408
1409 if (rcktpt_type[info->board] != ROCKET_TYPE_MODEMII &&
1410 rcktpt_type[info->board] != ROCKET_TYPE_MODEMIII)
1411 return -EINVAL;
1412
1413 if (info->ctlp->BusType == isISA)
1414 sModemReset(info->ctlp, info->chan, reset);
1415 else
1416 sPCIModemReset(info->ctlp, info->chan, reset);
1417
1418 return 0;
1419}
1420
1421static int get_version(struct r_port *info, struct rocket_version __user *retvers)
1422{
1423 if (copy_to_user(retvers, &driver_version, sizeof (*retvers)))
1424 return -EFAULT;
1425 return 0;
1426}
1427
1428/* IOCTL call handler into the driver */
1429static int rp_ioctl(struct tty_struct *tty, struct file *file,
1430 unsigned int cmd, unsigned long arg)
1431{
1432 struct r_port *info = (struct r_port *) tty->driver_data;
1433 void __user *argp = (void __user *)arg;
1434
1435 if (cmd != RCKP_GET_PORTS && rocket_paranoia_check(info, "rp_ioctl"))
1436 return -ENXIO;
1437
1438 switch (cmd) {
1439 case RCKP_GET_STRUCT:
1440 if (copy_to_user(argp, info, sizeof (struct r_port)))
1441 return -EFAULT;
1442 return 0;
1443 case RCKP_GET_CONFIG:
1444 return get_config(info, argp);
1445 case RCKP_SET_CONFIG:
1446 return set_config(info, argp);
1447 case RCKP_GET_PORTS:
1448 return get_ports(info, argp);
1449 case RCKP_RESET_RM2:
1450 return reset_rm2(info, argp);
1451 case RCKP_GET_VERSION:
1452 return get_version(info, argp);
1453 default:
1454 return -ENOIOCTLCMD;
1455 }
1456 return 0;
1457}
1458
1459static void rp_send_xchar(struct tty_struct *tty, char ch)
1460{
1461 struct r_port *info = (struct r_port *) tty->driver_data;
1462 CHANNEL_t *cp;
1463
1464 if (rocket_paranoia_check(info, "rp_send_xchar"))
1465 return;
1466
1467 cp = &info->channel;
1468 if (sGetTxCnt(cp))
1469 sWriteTxPrioByte(cp, ch);
1470 else
1471 sWriteTxByte(sGetTxRxDataIO(cp), ch);
1472}
1473
1474static void rp_throttle(struct tty_struct *tty)
1475{
1476 struct r_port *info = (struct r_port *) tty->driver_data;
1477 CHANNEL_t *cp;
1478
1479#ifdef ROCKET_DEBUG_THROTTLE
1480 printk(KERN_INFO "throttle %s: %d....\n", tty->name,
1481 tty->ldisc.chars_in_buffer(tty));
1482#endif
1483
1484 if (rocket_paranoia_check(info, "rp_throttle"))
1485 return;
1486
1487 cp = &info->channel;
1488 if (I_IXOFF(tty))
1489 rp_send_xchar(tty, STOP_CHAR(tty));
1490
1491 sClrRTS(&info->channel);
1492}
1493
1494static void rp_unthrottle(struct tty_struct *tty)
1495{
1496 struct r_port *info = (struct r_port *) tty->driver_data;
1497 CHANNEL_t *cp;
1498#ifdef ROCKET_DEBUG_THROTTLE
1499 printk(KERN_INFO "unthrottle %s: %d....\n", tty->name,
1500 tty->ldisc.chars_in_buffer(tty));
1501#endif
1502
1503 if (rocket_paranoia_check(info, "rp_throttle"))
1504 return;
1505
1506 cp = &info->channel;
1507 if (I_IXOFF(tty))
1508 rp_send_xchar(tty, START_CHAR(tty));
1509
1510 sSetRTS(&info->channel);
1511}
1512
1513/*
1514 * ------------------------------------------------------------
1515 * rp_stop() and rp_start()
1516 *
1517 * This routines are called before setting or resetting tty->stopped.
1518 * They enable or disable transmitter interrupts, as necessary.
1519 * ------------------------------------------------------------
1520 */
1521static void rp_stop(struct tty_struct *tty)
1522{
1523 struct r_port *info = (struct r_port *) tty->driver_data;
1524
1525#ifdef ROCKET_DEBUG_FLOW
1526 printk(KERN_INFO "stop %s: %d %d....\n", tty->name,
1527 info->xmit_cnt, info->xmit_fifo_room);
1528#endif
1529
1530 if (rocket_paranoia_check(info, "rp_stop"))
1531 return;
1532
1533 if (sGetTxCnt(&info->channel))
1534 sDisTransmit(&info->channel);
1535}
1536
1537static void rp_start(struct tty_struct *tty)
1538{
1539 struct r_port *info = (struct r_port *) tty->driver_data;
1540
1541#ifdef ROCKET_DEBUG_FLOW
1542 printk(KERN_INFO "start %s: %d %d....\n", tty->name,
1543 info->xmit_cnt, info->xmit_fifo_room);
1544#endif
1545
1546 if (rocket_paranoia_check(info, "rp_stop"))
1547 return;
1548
1549 sEnTransmit(&info->channel);
1550 set_bit((info->aiop * 8) + info->chan,
1551 (void *) &xmit_flags[info->board]);
1552}
1553
1554/*
1555 * rp_wait_until_sent() --- wait until the transmitter is empty
1556 */
1557static void rp_wait_until_sent(struct tty_struct *tty, int timeout)
1558{
1559 struct r_port *info = (struct r_port *) tty->driver_data;
1560 CHANNEL_t *cp;
1561 unsigned long orig_jiffies;
1562 int check_time, exit_time;
1563 int txcnt;
1564
1565 if (rocket_paranoia_check(info, "rp_wait_until_sent"))
1566 return;
1567
1568 cp = &info->channel;
1569
1570 orig_jiffies = jiffies;
1571#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
1572 printk(KERN_INFO "In RP_wait_until_sent(%d) (jiff=%lu)...", timeout,
1573 jiffies);
1574 printk(KERN_INFO "cps=%d...", info->cps);
1575#endif
1576 while (1) {
1577 txcnt = sGetTxCnt(cp);
1578 if (!txcnt) {
1579 if (sGetChanStatusLo(cp) & TXSHRMT)
1580 break;
1581 check_time = (HZ / info->cps) / 5;
1582 } else {
1583 check_time = HZ * txcnt / info->cps;
1584 }
1585 if (timeout) {
1586 exit_time = orig_jiffies + timeout - jiffies;
1587 if (exit_time <= 0)
1588 break;
1589 if (exit_time < check_time)
1590 check_time = exit_time;
1591 }
1592 if (check_time == 0)
1593 check_time = 1;
1594#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
1595 printk(KERN_INFO "txcnt = %d (jiff=%lu,check=%d)...", txcnt, jiffies, check_time);
1596#endif
1597 msleep_interruptible(jiffies_to_msecs(check_time));
1598 if (signal_pending(current))
1599 break;
1600 }
cc0a8fbb 1601 __set_current_state(TASK_RUNNING);
1da177e4
LT		 1602#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
1603 printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies);
1604#endif
1605}
1606
1607/*
1608 * rp_hangup() --- called by tty_hangup() when a hangup is signaled.
1609 */
1610static void rp_hangup(struct tty_struct *tty)
1611{
1612 CHANNEL_t *cp;
1613 struct r_port *info = (struct r_port *) tty->driver_data;
1614
1615 if (rocket_paranoia_check(info, "rp_hangup"))
1616 return;
1617
1618#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_HANGUP))
1619 printk(KERN_INFO "rp_hangup of ttyR%d...", info->line);
1620#endif
1621 rp_flush_buffer(tty);
1622 if (info->flags & ROCKET_CLOSING)
1623 return;
1624 if (info->count)
1625 atomic_dec(&rp_num_ports_open);
1626 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1627
1628 info->count = 0;
1629 info->flags &= ~ROCKET_NORMAL_ACTIVE;
1630 info->tty = NULL;
1631
1632 cp = &info->channel;
1633 sDisRxFIFO(cp);
1634 sDisTransmit(cp);
1635 sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
1636 sDisCTSFlowCtl(cp);
1637 sDisTxSoftFlowCtl(cp);
1638 sClrTxXOFF(cp);
1639 info->flags &= ~ROCKET_INITIALIZED;
1640
1641 wake_up_interruptible(&info->open_wait);
1642}
1643
1644/*
1645 * Exception handler - write char routine. The RocketPort driver uses a
1646 * double-buffering strategy, with the twist that if the in-memory CPU
1647 * buffer is empty, and there's space in the transmit FIFO, the
1648 * writing routines will write directly to transmit FIFO.
1649 * Write buffer and counters protected by spinlocks
1650 */
1651static void rp_put_char(struct tty_struct *tty, unsigned char ch)
1652{
1653 struct r_port *info = (struct r_port *) tty->driver_data;
1654 CHANNEL_t *cp;
1655 unsigned long flags;
1656
1657 if (rocket_paranoia_check(info, "rp_put_char"))
1658 return;
1659
69f545ea
MK		 1660 /*
1661 * Grab the port write mutex, locking out other processes that try to
1662 * write to this port
1663 */
1664 mutex_lock(&info->write_mtx);
1da177e4
LT		 1665
1666#ifdef ROCKET_DEBUG_WRITE
1667 printk(KERN_INFO "rp_put_char %c...", ch);
1668#endif
1669
1670 spin_lock_irqsave(&info->slock, flags);
1671 cp = &info->channel;
1672
1673 if (!tty->stopped && !tty->hw_stopped && info->xmit_fifo_room == 0)
1674 info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
1675
1676 if (tty->stopped || tty->hw_stopped || info->xmit_fifo_room == 0 || info->xmit_cnt != 0) {
1677 info->xmit_buf[info->xmit_head++] = ch;
1678 info->xmit_head &= XMIT_BUF_SIZE - 1;
1679 info->xmit_cnt++;
1680 set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1681 } else {
1682 sOutB(sGetTxRxDataIO(cp), ch);
1683 info->xmit_fifo_room--;
1684 }
1685 spin_unlock_irqrestore(&info->slock, flags);
69f545ea 1686 mutex_unlock(&info->write_mtx);
1da177e4
LT		 1687}
1688
1689/*
1690 * Exception handler - write routine, called when user app writes to the device.
69f545ea 1691 * A per port write mutex is used to protect from another process writing to
1da177e4
LT		 1692 * this port at the same time. This other process could be running on the other CPU
1693 * or get control of the CPU if the copy_from_user() blocks due to a page fault (swapped out).
1694 * Spinlocks protect the info xmit members.
1695 */
1696static int rp_write(struct tty_struct *tty,
1697 const unsigned char *buf, int count)
1698{
1699 struct r_port *info = (struct r_port *) tty->driver_data;
1700 CHANNEL_t *cp;
1701 const unsigned char *b;
1702 int c, retval = 0;
1703 unsigned long flags;
1704
1705 if (count <= 0 || rocket_paranoia_check(info, "rp_write"))
1706 return 0;
1707
1e3e8d91
SS		 1708 if (mutex_lock_interruptible(&info->write_mtx))
1709 return -ERESTARTSYS;
1da177e4
LT		 1710
1711#ifdef ROCKET_DEBUG_WRITE
1712 printk(KERN_INFO "rp_write %d chars...", count);
1713#endif
1714 cp = &info->channel;
1715
1716 if (!tty->stopped && !tty->hw_stopped && info->xmit_fifo_room < count)
1717 info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
1718
1719 /*
1720 * If the write queue for the port is empty, and there is FIFO space, stuff bytes
1721 * into FIFO. Use the write queue for temp storage.
1722 */
1723 if (!tty->stopped && !tty->hw_stopped && info->xmit_cnt == 0 && info->xmit_fifo_room > 0) {
1724 c = min(count, info->xmit_fifo_room);
1725 b = buf;
1726
1727 /* Push data into FIFO, 2 bytes at a time */
1728 sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) b, c / 2);
1729
1730 /* If there is a byte remaining, write it */
1731 if (c & 1)
1732 sOutB(sGetTxRxDataIO(cp), b[c - 1]);
1733
1734 retval += c;
1735 buf += c;
1736 count -= c;
1737
1738 spin_lock_irqsave(&info->slock, flags);
1739 info->xmit_fifo_room -= c;
1740 spin_unlock_irqrestore(&info->slock, flags);
1741 }
1742
1743 /* If count is zero, we wrote it all and are done */
1744 if (!count)
1745 goto end;
1746
1747 /* Write remaining data into the port's xmit_buf */
1748 while (1) {
1749 if (info->tty == 0) /* Seemingly obligatory check... */
1750 goto end;
1751
1752 c = min(count, min(XMIT_BUF_SIZE - info->xmit_cnt - 1, XMIT_BUF_SIZE - info->xmit_head));
1753 if (c <= 0)
1754 break;
1755
1756 b = buf;
1757 memcpy(info->xmit_buf + info->xmit_head, b, c);
1758
1759 spin_lock_irqsave(&info->slock, flags);
1760 info->xmit_head =
1761 (info->xmit_head + c) & (XMIT_BUF_SIZE - 1);
1762 info->xmit_cnt += c;
1763 spin_unlock_irqrestore(&info->slock, flags);
1764
1765 buf += c;
1766 count -= c;
1767 retval += c;
1768 }
1769
1770 if ((retval > 0) && !tty->stopped && !tty->hw_stopped)
1771 set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1772
1773end:
1774 if (info->xmit_cnt < WAKEUP_CHARS) {
1775 tty_wakeup(tty);
1da177e4
LT		 1776#ifdef ROCKETPORT_HAVE_POLL_WAIT
1777 wake_up_interruptible(&tty->poll_wait);
1778#endif
1779 }
69f545ea 1780 mutex_unlock(&info->write_mtx);
1da177e4
LT		 1781 return retval;
1782}
1783
1784/*
1785 * Return the number of characters that can be sent. We estimate
1786 * only using the in-memory transmit buffer only, and ignore the
1787 * potential space in the transmit FIFO.
1788 */
1789static int rp_write_room(struct tty_struct *tty)
1790{
1791 struct r_port *info = (struct r_port *) tty->driver_data;
1792 int ret;
1793
1794 if (rocket_paranoia_check(info, "rp_write_room"))
1795 return 0;
1796
1797 ret = XMIT_BUF_SIZE - info->xmit_cnt - 1;
1798 if (ret < 0)
1799 ret = 0;
1800#ifdef ROCKET_DEBUG_WRITE
1801 printk(KERN_INFO "rp_write_room returns %d...", ret);
1802#endif
1803 return ret;
1804}
1805
1806/*
1807 * Return the number of characters in the buffer. Again, this only
1808 * counts those characters in the in-memory transmit buffer.
1809 */
1810static int rp_chars_in_buffer(struct tty_struct *tty)
1811{
1812 struct r_port *info = (struct r_port *) tty->driver_data;
1813 CHANNEL_t *cp;
1814
1815 if (rocket_paranoia_check(info, "rp_chars_in_buffer"))
1816 return 0;
1817
1818 cp = &info->channel;
1819
1820#ifdef ROCKET_DEBUG_WRITE
1821 printk(KERN_INFO "rp_chars_in_buffer returns %d...", info->xmit_cnt);
1822#endif
1823 return info->xmit_cnt;
1824}
1825
1826/*
1827 * Flushes the TX fifo for a port, deletes data in the xmit_buf stored in the
1828 * r_port struct for the port. Note that spinlock are used to protect info members,
1829 * do not call this function if the spinlock is already held.
1830 */
1831static void rp_flush_buffer(struct tty_struct *tty)
1832{
1833 struct r_port *info = (struct r_port *) tty->driver_data;
1834 CHANNEL_t *cp;
1835 unsigned long flags;
1836
1837 if (rocket_paranoia_check(info, "rp_flush_buffer"))
1838 return;
1839
1840 spin_lock_irqsave(&info->slock, flags);
1841 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1842 spin_unlock_irqrestore(&info->slock, flags);
1843
1da177e4
LT		 1844#ifdef ROCKETPORT_HAVE_POLL_WAIT
1845 wake_up_interruptible(&tty->poll_wait);
1846#endif
1847 tty_wakeup(tty);
1848
1849 cp = &info->channel;
1850 sFlushTxFIFO(cp);
1851}
1852
1853#ifdef CONFIG_PCI
1854
8d5916d3
JS		 1855static struct pci_device_id __devinitdata rocket_pci_ids[] = {
1856 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_ANY_ID) },
1857 { }
1858};
1859MODULE_DEVICE_TABLE(pci, rocket_pci_ids);
1860
1da177e4
LT		 1861/*
1862 * Called when a PCI card is found. Retrieves and stores model information,
1863 * init's aiopic and serial port hardware.
1864 * Inputs: i is the board number (0-n)
1865 */
f15313bf 1866static __init int register_PCI(int i, struct pci_dev *dev)
1da177e4
LT		 1867{
1868 int num_aiops, aiop, max_num_aiops, num_chan, chan;
1869 unsigned int aiopio[MAX_AIOPS_PER_BOARD];
1870 char *str, *board_type;
1871 CONTROLLER_t *ctlp;
1872
1873 int fast_clock = 0;
1874 int altChanRingIndicator = 0;
1875 int ports_per_aiop = 8;
1876 int ret;
1877 unsigned int class_rev;
1878 WordIO_t ConfigIO = 0;
1879 ByteIO_t UPCIRingInd = 0;
1880
1881 if (!dev || pci_enable_device(dev))
1882 return 0;
1883
1884 rcktpt_io_addr[i] = pci_resource_start(dev, 0);
1885 ret = pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
1886
1887 if (ret) {
1888 printk(KERN_INFO " Error during register_PCI(), unable to read config dword \n");
1889 return 0;
1890 }
1891
1892 rcktpt_type[i] = ROCKET_TYPE_NORMAL;
1893 rocketModel[i].loadrm2 = 0;
1894 rocketModel[i].startingPortNumber = nextLineNumber;
1895
1896 /* Depending on the model, set up some config variables */
1897 switch (dev->device) {
1898 case PCI_DEVICE_ID_RP4QUAD:
1899 str = "Quadcable";
1900 max_num_aiops = 1;
1901 ports_per_aiop = 4;
1902 rocketModel[i].model = MODEL_RP4QUAD;
1903 strcpy(rocketModel[i].modelString, "RocketPort 4 port w/quad cable");
1904 rocketModel[i].numPorts = 4;
1905 break;
1906 case PCI_DEVICE_ID_RP8OCTA:
1907 str = "Octacable";
1908 max_num_aiops = 1;
1909 rocketModel[i].model = MODEL_RP8OCTA;
1910 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/octa cable");
1911 rocketModel[i].numPorts = 8;
1912 break;
1913 case PCI_DEVICE_ID_URP8OCTA:
1914 str = "Octacable";
1915 max_num_aiops = 1;
1916 rocketModel[i].model = MODEL_UPCI_RP8OCTA;
1917 strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/octa cable");
1918 rocketModel[i].numPorts = 8;
1919 break;
1920 case PCI_DEVICE_ID_RP8INTF:
1921 str = "8";
1922 max_num_aiops = 1;
1923 rocketModel[i].model = MODEL_RP8INTF;
1924 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/external I/F");
1925 rocketModel[i].numPorts = 8;
1926 break;
1927 case PCI_DEVICE_ID_URP8INTF:
1928 str = "8";
1929 max_num_aiops = 1;
1930 rocketModel[i].model = MODEL_UPCI_RP8INTF;
1931 strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/external I/F");
1932 rocketModel[i].numPorts = 8;
1933 break;
1934 case PCI_DEVICE_ID_RP8J:
1935 str = "8J";
1936 max_num_aiops = 1;
1937 rocketModel[i].model = MODEL_RP8J;
1938 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/RJ11 connectors");
1939 rocketModel[i].numPorts = 8;
1940 break;
1941 case PCI_DEVICE_ID_RP4J:
1942 str = "4J";
1943 max_num_aiops = 1;
1944 ports_per_aiop = 4;
1945 rocketModel[i].model = MODEL_RP4J;
1946 strcpy(rocketModel[i].modelString, "RocketPort 4 port w/RJ45 connectors");
1947 rocketModel[i].numPorts = 4;
1948 break;
1949 case PCI_DEVICE_ID_RP8SNI:
1950 str = "8 (DB78 Custom)";
1951 max_num_aiops = 1;
1952 rocketModel[i].model = MODEL_RP8SNI;
1953 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/ custom DB78");
1954 rocketModel[i].numPorts = 8;
1955 break;
1956 case PCI_DEVICE_ID_RP16SNI:
1957 str = "16 (DB78 Custom)";
1958 max_num_aiops = 2;
1959 rocketModel[i].model = MODEL_RP16SNI;
1960 strcpy(rocketModel[i].modelString, "RocketPort 16 port w/ custom DB78");
1961 rocketModel[i].numPorts = 16;
1962 break;
1963 case PCI_DEVICE_ID_RP16INTF:
1964 str = "16";
1965 max_num_aiops = 2;
1966 rocketModel[i].model = MODEL_RP16INTF;
1967 strcpy(rocketModel[i].modelString, "RocketPort 16 port w/external I/F");
1968 rocketModel[i].numPorts = 16;
1969 break;
1970 case PCI_DEVICE_ID_URP16INTF:
1971 str = "16";
1972 max_num_aiops = 2;
1973 rocketModel[i].model = MODEL_UPCI_RP16INTF;
1974 strcpy(rocketModel[i].modelString, "RocketPort UPCI 16 port w/external I/F");
1975 rocketModel[i].numPorts = 16;
1976 break;
1977 case PCI_DEVICE_ID_CRP16INTF:
1978 str = "16";
1979 max_num_aiops = 2;
1980 rocketModel[i].model = MODEL_CPCI_RP16INTF;
1981 strcpy(rocketModel[i].modelString, "RocketPort Compact PCI 16 port w/external I/F");
1982 rocketModel[i].numPorts = 16;
1983 break;
1984 case PCI_DEVICE_ID_RP32INTF:
1985 str = "32";
1986 max_num_aiops = 4;
1987 rocketModel[i].model = MODEL_RP32INTF;
1988 strcpy(rocketModel[i].modelString, "RocketPort 32 port w/external I/F");
1989 rocketModel[i].numPorts = 32;
1990 break;
1991 case PCI_DEVICE_ID_URP32INTF:
1992 str = "32";
1993 max_num_aiops = 4;
1994 rocketModel[i].model = MODEL_UPCI_RP32INTF;
1995 strcpy(rocketModel[i].modelString, "RocketPort UPCI 32 port w/external I/F");
1996 rocketModel[i].numPorts = 32;
1997 break;
1998 case PCI_DEVICE_ID_RPP4:
1999 str = "Plus Quadcable";
2000 max_num_aiops = 1;
2001 ports_per_aiop = 4;
2002 altChanRingIndicator++;
2003 fast_clock++;
2004 rocketModel[i].model = MODEL_RPP4;
2005 strcpy(rocketModel[i].modelString, "RocketPort Plus 4 port");
2006 rocketModel[i].numPorts = 4;
2007 break;
2008 case PCI_DEVICE_ID_RPP8:
2009 str = "Plus Octacable";
2010 max_num_aiops = 2;
2011 ports_per_aiop = 4;
2012 altChanRingIndicator++;
2013 fast_clock++;
2014 rocketModel[i].model = MODEL_RPP8;
2015 strcpy(rocketModel[i].modelString, "RocketPort Plus 8 port");
2016 rocketModel[i].numPorts = 8;
2017 break;
2018 case PCI_DEVICE_ID_RP2_232:
2019 str = "Plus 2 (RS-232)";
2020 max_num_aiops = 1;
2021 ports_per_aiop = 2;
2022 altChanRingIndicator++;
2023 fast_clock++;
2024 rocketModel[i].model = MODEL_RP2_232;
2025 strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS232");
2026 rocketModel[i].numPorts = 2;
2027 break;
2028 case PCI_DEVICE_ID_RP2_422:
2029 str = "Plus 2 (RS-422)";
2030 max_num_aiops = 1;
2031 ports_per_aiop = 2;
2032 altChanRingIndicator++;
2033 fast_clock++;
2034 rocketModel[i].model = MODEL_RP2_422;
2035 strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS422");
2036 rocketModel[i].numPorts = 2;
2037 break;
2038 case PCI_DEVICE_ID_RP6M:
2039
2040 max_num_aiops = 1;
2041 ports_per_aiop = 6;
2042 str = "6-port";
2043
2044 /* If class_rev is 1, the rocketmodem flash must be loaded. If it is 2 it is a "socketed" version. */
2045 if ((class_rev & 0xFF) == 1) {
2046 rcktpt_type[i] = ROCKET_TYPE_MODEMII;
2047 rocketModel[i].loadrm2 = 1;
2048 } else {
2049 rcktpt_type[i] = ROCKET_TYPE_MODEM;
2050 }
2051
2052 rocketModel[i].model = MODEL_RP6M;
2053 strcpy(rocketModel[i].modelString, "RocketModem 6 port");
2054 rocketModel[i].numPorts = 6;
2055 break;
2056 case PCI_DEVICE_ID_RP4M:
2057 max_num_aiops = 1;
2058 ports_per_aiop = 4;
2059 str = "4-port";
2060 if ((class_rev & 0xFF) == 1) {
2061 rcktpt_type[i] = ROCKET_TYPE_MODEMII;
2062 rocketModel[i].loadrm2 = 1;
2063 } else {
2064 rcktpt_type[i] = ROCKET_TYPE_MODEM;
2065 }
2066
2067 rocketModel[i].model = MODEL_RP4M;
2068 strcpy(rocketModel[i].modelString, "RocketModem 4 port");
2069 rocketModel[i].numPorts = 4;
2070 break;
2071 default:
2072 str = "(unknown/unsupported)";
2073 max_num_aiops = 0;
2074 break;
2075 }
2076
2077 /*
2078 * Check for UPCI boards.
2079 */
2080
2081 switch (dev->device) {
2082 case PCI_DEVICE_ID_URP32INTF:
2083 case PCI_DEVICE_ID_URP8INTF:
2084 case PCI_DEVICE_ID_URP16INTF:
2085 case PCI_DEVICE_ID_CRP16INTF:
2086 case PCI_DEVICE_ID_URP8OCTA:
2087 rcktpt_io_addr[i] = pci_resource_start(dev, 2);
2088 ConfigIO = pci_resource_start(dev, 1);
2089 if (dev->device == PCI_DEVICE_ID_URP8OCTA) {
2090 UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
2091
2092 /*
2093 * Check for octa or quad cable.
2094 */
2095 if (!
2096 (sInW(ConfigIO + _PCI_9030_GPIO_CTRL) &
2097 PCI_GPIO_CTRL_8PORT)) {
2098 str = "Quadcable";
2099 ports_per_aiop = 4;
2100 rocketModel[i].numPorts = 4;
2101 }
2102 }
2103 break;
2104 case PCI_DEVICE_ID_UPCI_RM3_8PORT:
2105 str = "8 ports";
2106 max_num_aiops = 1;
2107 rocketModel[i].model = MODEL_UPCI_RM3_8PORT;
2108 strcpy(rocketModel[i].modelString, "RocketModem III 8 port");
2109 rocketModel[i].numPorts = 8;
2110 rcktpt_io_addr[i] = pci_resource_start(dev, 2);
2111 UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
2112 ConfigIO = pci_resource_start(dev, 1);
2113 rcktpt_type[i] = ROCKET_TYPE_MODEMIII;
2114 break;
2115 case PCI_DEVICE_ID_UPCI_RM3_4PORT:
2116 str = "4 ports";
2117 max_num_aiops = 1;
2118 rocketModel[i].model = MODEL_UPCI_RM3_4PORT;
2119 strcpy(rocketModel[i].modelString, "RocketModem III 4 port");
2120 rocketModel[i].numPorts = 4;
2121 rcktpt_io_addr[i] = pci_resource_start(dev, 2);
2122 UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
2123 ConfigIO = pci_resource_start(dev, 1);
2124 rcktpt_type[i] = ROCKET_TYPE_MODEMIII;
2125 break;
2126 default:
2127 break;
2128 }
2129
2130 switch (rcktpt_type[i]) {
2131 case ROCKET_TYPE_MODEM:
2132 board_type = "RocketModem";
2133 break;
2134 case ROCKET_TYPE_MODEMII:
2135 board_type = "RocketModem II";
2136 break;
2137 case ROCKET_TYPE_MODEMIII:
2138 board_type = "RocketModem III";
2139 break;
2140 default:
2141 board_type = "RocketPort";
2142 break;
2143 }
2144
2145 if (fast_clock) {
2146 sClockPrescale = 0x12; /* mod 2 (divide by 3) */
2147 rp_baud_base[i] = 921600;
2148 } else {
2149 /*
2150 * If support_low_speed is set, use the slow clock
2151 * prescale, which supports 50 bps
2152 */
2153 if (support_low_speed) {
2154 /* mod 9 (divide by 10) prescale */
2155 sClockPrescale = 0x19;
2156 rp_baud_base[i] = 230400;
2157 } else {
2158 /* mod 4 (devide by 5) prescale */
2159 sClockPrescale = 0x14;
2160 rp_baud_base[i] = 460800;
2161 }
2162 }
2163
2164 for (aiop = 0; aiop < max_num_aiops; aiop++)
2165 aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x40);
2166 ctlp = sCtlNumToCtlPtr(i);
2167 num_aiops = sPCIInitController(ctlp, i, aiopio, max_num_aiops, ConfigIO, 0, FREQ_DIS, 0, altChanRingIndicator, UPCIRingInd);
2168 for (aiop = 0; aiop < max_num_aiops; aiop++)
2169 ctlp->AiopNumChan[aiop] = ports_per_aiop;
2170
2171 printk("Comtrol PCI controller #%d ID 0x%x found in bus:slot:fn %s at address %04lx, "
2172 "%d AIOP(s) (%s)\n", i, dev->device, pci_name(dev),
2173 rcktpt_io_addr[i], num_aiops, rocketModel[i].modelString);
2174 printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n",
2175 rocketModel[i].modelString,
2176 rocketModel[i].startingPortNumber,
2177 rocketModel[i].startingPortNumber +
2178 rocketModel[i].numPorts - 1);
2179
2180 if (num_aiops <= 0) {
2181 rcktpt_io_addr[i] = 0;
2182 return (0);
2183 }
2184 is_PCI[i] = 1;
2185
2186 /* Reset the AIOPIC, init the serial ports */
2187 for (aiop = 0; aiop < num_aiops; aiop++) {
2188 sResetAiopByNum(ctlp, aiop);
2189 num_chan = ports_per_aiop;
2190 for (chan = 0; chan < num_chan; chan++)
2191 init_r_port(i, aiop, chan, dev);
2192 }
2193
2194 /* Rocket modems must be reset */
2195 if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) ||
2196 (rcktpt_type[i] == ROCKET_TYPE_MODEMII) ||
2197 (rcktpt_type[i] == ROCKET_TYPE_MODEMIII)) {
2198 num_chan = ports_per_aiop;
2199 for (chan = 0; chan < num_chan; chan++)
2200 sPCIModemReset(ctlp, chan, 1);
2201 mdelay(500);
2202 for (chan = 0; chan < num_chan; chan++)
2203 sPCIModemReset(ctlp, chan, 0);
2204 mdelay(500);
2205 rmSpeakerReset(ctlp, rocketModel[i].model);
2206 }
2207 return (1);
2208}
2209
2210/*
2211 * Probes for PCI cards, inits them if found
2212 * Input: board_found = number of ISA boards already found, or the
2213 * starting board number
2214 * Returns: Number of PCI boards found
2215 */
2216static int __init init_PCI(int boards_found)
2217{
2218 struct pci_dev *dev = NULL;
2219 int count = 0;
2220
2221 /* Work through the PCI device list, pulling out ours */
606d099c 2222 while ((dev = pci_get_device(PCI_VENDOR_ID_RP, PCI_ANY_ID, dev))) {
1da177e4
LT		 2223 if (register_PCI(count + boards_found, dev))
2224 count++;
2225 }
2226 return (count);
2227}
2228
2229#endif /* CONFIG_PCI */
2230
2231/*
2232 * Probes for ISA cards
2233 * Input: i = the board number to look for
2234 * Returns: 1 if board found, 0 else
2235 */
2236static int __init init_ISA(int i)
2237{
2238 int num_aiops, num_chan = 0, total_num_chan = 0;
2239 int aiop, chan;
2240 unsigned int aiopio[MAX_AIOPS_PER_BOARD];
2241 CONTROLLER_t *ctlp;
2242 char *type_string;
2243
2244 /* If io_addr is zero, no board configured */
2245 if (rcktpt_io_addr[i] == 0)
2246 return (0);
2247
2248 /* Reserve the IO region */
2249 if (!request_region(rcktpt_io_addr[i], 64, "Comtrol RocketPort")) {
2250 printk(KERN_INFO "Unable to reserve IO region for configured ISA RocketPort at address 0x%lx, board not installed...\n", rcktpt_io_addr[i]);
2251 rcktpt_io_addr[i] = 0;
2252 return (0);
2253 }
2254
2255 ctlp = sCtlNumToCtlPtr(i);
2256
2257 ctlp->boardType = rcktpt_type[i];
2258
2259 switch (rcktpt_type[i]) {
2260 case ROCKET_TYPE_PC104:
2261 type_string = "(PC104)";
2262 break;
2263 case ROCKET_TYPE_MODEM:
2264 type_string = "(RocketModem)";
2265 break;
2266 case ROCKET_TYPE_MODEMII:
2267 type_string = "(RocketModem II)";
2268 break;
2269 default:
2270 type_string = "";
2271 break;
2272 }
2273
2274 /*
2275 * If support_low_speed is set, use the slow clock prescale,
2276 * which supports 50 bps
2277 */
2278 if (support_low_speed) {
2279 sClockPrescale = 0x19; /* mod 9 (divide by 10) prescale */
2280 rp_baud_base[i] = 230400;
2281 } else {
2282 sClockPrescale = 0x14; /* mod 4 (devide by 5) prescale */
2283 rp_baud_base[i] = 460800;
2284 }
2285
2286 for (aiop = 0; aiop < MAX_AIOPS_PER_BOARD; aiop++)
2287 aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x400);
2288
2289 num_aiops = sInitController(ctlp, i, controller + (i * 0x400), aiopio, MAX_AIOPS_PER_BOARD, 0, FREQ_DIS, 0);
2290
2291 if (ctlp->boardType == ROCKET_TYPE_PC104) {
2292 sEnAiop(ctlp, 2); /* only one AIOPIC, but these */
2293 sEnAiop(ctlp, 3); /* CSels used for other stuff */
2294 }
2295
2296 /* If something went wrong initing the AIOP's release the ISA IO memory */
2297 if (num_aiops <= 0) {
2298 release_region(rcktpt_io_addr[i], 64);
2299 rcktpt_io_addr[i] = 0;
2300 return (0);
2301 }
2302
2303 rocketModel[i].startingPortNumber = nextLineNumber;
2304
2305 for (aiop = 0; aiop < num_aiops; aiop++) {
2306 sResetAiopByNum(ctlp, aiop);
2307 sEnAiop(ctlp, aiop);
2308 num_chan = sGetAiopNumChan(ctlp, aiop);
2309 total_num_chan += num_chan;
2310 for (chan = 0; chan < num_chan; chan++)
2311 init_r_port(i, aiop, chan, NULL);
2312 }
2313 is_PCI[i] = 0;
2314 if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) || (rcktpt_type[i] == ROCKET_TYPE_MODEMII)) {
2315 num_chan = sGetAiopNumChan(ctlp, 0);
2316 total_num_chan = num_chan;
2317 for (chan = 0; chan < num_chan; chan++)
2318 sModemReset(ctlp, chan, 1);
2319 mdelay(500);
2320 for (chan = 0; chan < num_chan; chan++)
2321 sModemReset(ctlp, chan, 0);
2322 mdelay(500);
2323 strcpy(rocketModel[i].modelString, "RocketModem ISA");
2324 } else {
2325 strcpy(rocketModel[i].modelString, "RocketPort ISA");
2326 }
2327 rocketModel[i].numPorts = total_num_chan;
2328 rocketModel[i].model = MODEL_ISA;
2329
2330 printk(KERN_INFO "RocketPort ISA card #%d found at 0x%lx - %d AIOPs %s\n",
2331 i, rcktpt_io_addr[i], num_aiops, type_string);
2332
2333 printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n",
2334 rocketModel[i].modelString,
2335 rocketModel[i].startingPortNumber,
2336 rocketModel[i].startingPortNumber +
2337 rocketModel[i].numPorts - 1);
2338
2339 return (1);
2340}
2341
b68e31d0 2342static const struct tty_operations rocket_ops = {
1da177e4
LT		 2343 .open = rp_open,
2344 .close = rp_close,
2345 .write = rp_write,
2346 .put_char = rp_put_char,
2347 .write_room = rp_write_room,
2348 .chars_in_buffer = rp_chars_in_buffer,
2349 .flush_buffer = rp_flush_buffer,
2350 .ioctl = rp_ioctl,
2351 .throttle = rp_throttle,
2352 .unthrottle = rp_unthrottle,
2353 .set_termios = rp_set_termios,
2354 .stop = rp_stop,
2355 .start = rp_start,
2356 .hangup = rp_hangup,
2357 .break_ctl = rp_break,
2358 .send_xchar = rp_send_xchar,
2359 .wait_until_sent = rp_wait_until_sent,
2360 .tiocmget = rp_tiocmget,
2361 .tiocmset = rp_tiocmset,
2362};
2363
2364/*
2365 * The module "startup" routine; it's run when the module is loaded.
2366 */
d269cdd0 2367static int __init rp_init(void)
1da177e4
LT		 2368{
2369 int retval, pci_boards_found, isa_boards_found, i;
2370
2371 printk(KERN_INFO "RocketPort device driver module, version %s, %s\n",
2372 ROCKET_VERSION, ROCKET_DATE);
2373
2374 rocket_driver = alloc_tty_driver(MAX_RP_PORTS);
2375 if (!rocket_driver)
2376 return -ENOMEM;
2377
1da177e4
LT		 2378 /*
2379 * Initialize the array of pointers to our own internal state
2380 * structures.
2381 */
2382 memset(rp_table, 0, sizeof (rp_table));
2383 memset(xmit_flags, 0, sizeof (xmit_flags));
2384
2385 for (i = 0; i < MAX_RP_PORTS; i++)
2386 lineNumbers[i] = 0;
2387 nextLineNumber = 0;
2388 memset(rocketModel, 0, sizeof (rocketModel));
2389
2390 /*
2391 * If board 1 is non-zero, there is at least one ISA configured. If controller is
2392 * zero, use the default controller IO address of board1 + 0x40.
2393 */
2394 if (board1) {
2395 if (controller == 0)
2396 controller = board1 + 0x40;
2397 } else {
2398 controller = 0; /* Used as a flag, meaning no ISA boards */
2399 }
2400
2401 /* If an ISA card is configured, reserve the 4 byte IO space for the Mudbac controller */
2402 if (controller && (!request_region(controller, 4, "Comtrol RocketPort"))) {
2403 printk(KERN_INFO "Unable to reserve IO region for first configured ISA RocketPort controller 0x%lx. Driver exiting \n", controller);
2404 return -EBUSY;
2405 }
2406
2407 /* Store ISA variable retrieved from command line or .conf file. */
2408 rcktpt_io_addr[0] = board1;
2409 rcktpt_io_addr[1] = board2;
2410 rcktpt_io_addr[2] = board3;
2411 rcktpt_io_addr[3] = board4;
2412
2413 rcktpt_type[0] = modem1 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2414 rcktpt_type[0] = pc104_1[0] ? ROCKET_TYPE_PC104 : rcktpt_type[0];
2415 rcktpt_type[1] = modem2 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2416 rcktpt_type[1] = pc104_2[0] ? ROCKET_TYPE_PC104 : rcktpt_type[1];
2417 rcktpt_type[2] = modem3 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2418 rcktpt_type[2] = pc104_3[0] ? ROCKET_TYPE_PC104 : rcktpt_type[2];
2419 rcktpt_type[3] = modem4 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2420 rcktpt_type[3] = pc104_4[0] ? ROCKET_TYPE_PC104 : rcktpt_type[3];
2421
2422 /*
2423 * Set up the tty driver structure and then register this
2424 * driver with the tty layer.
2425 */
2426
2427 rocket_driver->owner = THIS_MODULE;
331b8319 2428 rocket_driver->flags = TTY_DRIVER_DYNAMIC_DEV;
1da177e4
LT		 2429 rocket_driver->name = "ttyR";
2430 rocket_driver->driver_name = "Comtrol RocketPort";
2431 rocket_driver->major = TTY_ROCKET_MAJOR;
2432 rocket_driver->minor_start = 0;
2433 rocket_driver->type = TTY_DRIVER_TYPE_SERIAL;
2434 rocket_driver->subtype = SERIAL_TYPE_NORMAL;
2435 rocket_driver->init_termios = tty_std_termios;
2436 rocket_driver->init_termios.c_cflag =
2437 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
606d099c
AC		 2438 rocket_driver->init_termios.c_ispeed = 9600;
2439 rocket_driver->init_termios.c_ospeed = 9600;
1da177e4 2440#ifdef ROCKET_SOFT_FLOW
331b8319 2441 rocket_driver->flags |= TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
1da177e4
LT		 2442#endif
2443 tty_set_operations(rocket_driver, &rocket_ops);
2444
2445 retval = tty_register_driver(rocket_driver);
2446 if (retval < 0) {
2447 printk(KERN_INFO "Couldn't install tty RocketPort driver (error %d)\n", -retval);
2448 put_tty_driver(rocket_driver);
2449 return -1;
2450 }
2451
2452#ifdef ROCKET_DEBUG_OPEN
2453 printk(KERN_INFO "RocketPort driver is major %d\n", rocket_driver.major);
2454#endif
2455
2456 /*
2457 * OK, let's probe each of the controllers looking for boards. Any boards found
2458 * will be initialized here.
2459 */
2460 isa_boards_found = 0;
2461 pci_boards_found = 0;
2462
2463 for (i = 0; i < NUM_BOARDS; i++) {
2464 if (init_ISA(i))
2465 isa_boards_found++;
2466 }
2467
2468#ifdef CONFIG_PCI
2469 if (isa_boards_found < NUM_BOARDS)
2470 pci_boards_found = init_PCI(isa_boards_found);
2471#endif
2472
2473 max_board = pci_boards_found + isa_boards_found;
2474
2475 if (max_board == 0) {
2476 printk(KERN_INFO "No rocketport ports found; unloading driver.\n");
2477 del_timer_sync(&rocket_timer);
2478 tty_unregister_driver(rocket_driver);
2479 put_tty_driver(rocket_driver);
2480 return -ENXIO;
2481 }
2482
2483 return 0;
2484}
2485
1da177e4
LT		 2486
2487static void rp_cleanup_module(void)
2488{
2489 int retval;
2490 int i;
2491
2492 del_timer_sync(&rocket_timer);
2493
2494 retval = tty_unregister_driver(rocket_driver);
2495 if (retval)
2496 printk(KERN_INFO "Error %d while trying to unregister "
2497 "rocketport driver\n", -retval);
2498 put_tty_driver(rocket_driver);
2499
735d5661
JJ		 2500 for (i = 0; i < MAX_RP_PORTS; i++)
2501 kfree(rp_table[i]);
1da177e4
LT		 2502
2503 for (i = 0; i < NUM_BOARDS; i++) {
2504 if (rcktpt_io_addr[i] <= 0 || is_PCI[i])
2505 continue;
2506 release_region(rcktpt_io_addr[i], 64);
2507 }
2508 if (controller)
2509 release_region(controller, 4);
2510}
1da177e4 2511
1da177e4
LT		 2512/***************************************************************************
2513Function: sInitController
2514Purpose: Initialization of controller global registers and controller
2515 structure.
2516Call: sInitController(CtlP,CtlNum,MudbacIO,AiopIOList,AiopIOListSize,
2517 IRQNum,Frequency,PeriodicOnly)
2518 CONTROLLER_T *CtlP; Ptr to controller structure
2519 int CtlNum; Controller number
2520 ByteIO_t MudbacIO; Mudbac base I/O address.
2521 ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
2522 This list must be in the order the AIOPs will be found on the
2523 controller. Once an AIOP in the list is not found, it is
2524 assumed that there are no more AIOPs on the controller.
2525 int AiopIOListSize; Number of addresses in AiopIOList
2526 int IRQNum; Interrupt Request number. Can be any of the following:
2527 0: Disable global interrupts
2528 3: IRQ 3
2529 4: IRQ 4
2530 5: IRQ 5
2531 9: IRQ 9
2532 10: IRQ 10
2533 11: IRQ 11
2534 12: IRQ 12
2535 15: IRQ 15
2536 Byte_t Frequency: A flag identifying the frequency
2537 of the periodic interrupt, can be any one of the following:
2538 FREQ_DIS - periodic interrupt disabled
2539 FREQ_137HZ - 137 Hertz
2540 FREQ_69HZ - 69 Hertz
2541 FREQ_34HZ - 34 Hertz
2542 FREQ_17HZ - 17 Hertz
2543 FREQ_9HZ - 9 Hertz
2544 FREQ_4HZ - 4 Hertz
2545 If IRQNum is set to 0 the Frequency parameter is
2546 overidden, it is forced to a value of FREQ_DIS.
f15313bf 2547 int PeriodicOnly: 1 if all interrupts except the periodic
1da177e4 2548 interrupt are to be blocked.
f15313bf 2549 0 is both the periodic interrupt and
1da177e4
LT		 2550 other channel interrupts are allowed.
2551 If IRQNum is set to 0 the PeriodicOnly parameter is
f15313bf 2552 overidden, it is forced to a value of 0.
1da177e4
LT		 2553Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller
2554 initialization failed.
2555
2556Comments:
2557 If periodic interrupts are to be disabled but AIOP interrupts
f15313bf 2558 are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
1da177e4
LT		 2559
2560 If interrupts are to be completely disabled set IRQNum to 0.
2561
f15313bf 2562 Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
1da177e4
LT		 2563 invalid combination.
2564
2565 This function performs initialization of global interrupt modes,
2566 but it does not actually enable global interrupts. To enable
2567 and disable global interrupts use functions sEnGlobalInt() and
2568 sDisGlobalInt(). Enabling of global interrupts is normally not
2569 done until all other initializations are complete.
2570
2571 Even if interrupts are globally enabled, they must also be
2572 individually enabled for each channel that is to generate
2573 interrupts.
2574
2575Warnings: No range checking on any of the parameters is done.
2576
2577 No context switches are allowed while executing this function.
2578
2579 After this function all AIOPs on the controller are disabled,
2580 they can be enabled with sEnAiop().
2581*/
f15313bf
AB		 2582static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO,
2583 ByteIO_t * AiopIOList, int AiopIOListSize,
2584 int IRQNum, Byte_t Frequency, int PeriodicOnly)
1da177e4
LT		 2585{
2586 int i;
2587 ByteIO_t io;
2588 int done;
2589
2590 CtlP->AiopIntrBits = aiop_intr_bits;
2591 CtlP->AltChanRingIndicator = 0;
2592 CtlP->CtlNum = CtlNum;
2593 CtlP->CtlID = CTLID_0001; /* controller release 1 */
2594 CtlP->BusType = isISA;
2595 CtlP->MBaseIO = MudbacIO;
2596 CtlP->MReg1IO = MudbacIO + 1;
2597 CtlP->MReg2IO = MudbacIO + 2;
2598 CtlP->MReg3IO = MudbacIO + 3;
2599#if 1
2600 CtlP->MReg2 = 0; /* interrupt disable */
2601 CtlP->MReg3 = 0; /* no periodic interrupts */
2602#else
2603 if (sIRQMap[IRQNum] == 0) { /* interrupts globally disabled */
2604 CtlP->MReg2 = 0; /* interrupt disable */
2605 CtlP->MReg3 = 0; /* no periodic interrupts */
2606 } else {
2607 CtlP->MReg2 = sIRQMap[IRQNum]; /* set IRQ number */
2608 CtlP->MReg3 = Frequency; /* set frequency */
2609 if (PeriodicOnly) { /* periodic interrupt only */
2610 CtlP->MReg3 |= PERIODIC_ONLY;
2611 }
2612 }
2613#endif
2614 sOutB(CtlP->MReg2IO, CtlP->MReg2);
2615 sOutB(CtlP->MReg3IO, CtlP->MReg3);
2616 sControllerEOI(CtlP); /* clear EOI if warm init */
2617 /* Init AIOPs */
2618 CtlP->NumAiop = 0;
2619 for (i = done = 0; i < AiopIOListSize; i++) {
2620 io = AiopIOList[i];
2621 CtlP->AiopIO[i] = (WordIO_t) io;
2622 CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
2623 sOutB(CtlP->MReg2IO, CtlP->MReg2 | (i & 0x03)); /* AIOP index */
2624 sOutB(MudbacIO, (Byte_t) (io >> 6)); /* set up AIOP I/O in MUDBAC */
2625 if (done)
2626 continue;
2627 sEnAiop(CtlP, i); /* enable the AIOP */
2628 CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */
2629 if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */
2630 done = 1; /* done looking for AIOPs */
2631 else {
2632 CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */
2633 sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */
2634 sOutB(io + _INDX_DATA, sClockPrescale);
2635 CtlP->NumAiop++; /* bump count of AIOPs */
2636 }
2637 sDisAiop(CtlP, i); /* disable AIOP */
2638 }
2639
2640 if (CtlP->NumAiop == 0)
2641 return (-1);
2642 else
2643 return (CtlP->NumAiop);
2644}
2645
2646/***************************************************************************
2647Function: sPCIInitController
2648Purpose: Initialization of controller global registers and controller
2649 structure.
2650Call: sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize,
2651 IRQNum,Frequency,PeriodicOnly)
2652 CONTROLLER_T *CtlP; Ptr to controller structure
2653 int CtlNum; Controller number
2654 ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
2655 This list must be in the order the AIOPs will be found on the
2656 controller. Once an AIOP in the list is not found, it is
2657 assumed that there are no more AIOPs on the controller.
2658 int AiopIOListSize; Number of addresses in AiopIOList
2659 int IRQNum; Interrupt Request number. Can be any of the following:
2660 0: Disable global interrupts
2661 3: IRQ 3
2662 4: IRQ 4
2663 5: IRQ 5
2664 9: IRQ 9
2665 10: IRQ 10
2666 11: IRQ 11
2667 12: IRQ 12
2668 15: IRQ 15
2669 Byte_t Frequency: A flag identifying the frequency
2670 of the periodic interrupt, can be any one of the following:
2671 FREQ_DIS - periodic interrupt disabled
2672 FREQ_137HZ - 137 Hertz
2673 FREQ_69HZ - 69 Hertz
2674 FREQ_34HZ - 34 Hertz
2675 FREQ_17HZ - 17 Hertz
2676 FREQ_9HZ - 9 Hertz
2677 FREQ_4HZ - 4 Hertz
2678 If IRQNum is set to 0 the Frequency parameter is
2679 overidden, it is forced to a value of FREQ_DIS.
f15313bf 2680 int PeriodicOnly: 1 if all interrupts except the periodic
1da177e4 2681 interrupt are to be blocked.
f15313bf 2682 0 is both the periodic interrupt and
1da177e4
LT		 2683 other channel interrupts are allowed.
2684 If IRQNum is set to 0 the PeriodicOnly parameter is
f15313bf 2685 overidden, it is forced to a value of 0.
1da177e4
LT		 2686Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller
2687 initialization failed.
2688
2689Comments:
2690 If periodic interrupts are to be disabled but AIOP interrupts
f15313bf 2691 are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
1da177e4
LT		 2692
2693 If interrupts are to be completely disabled set IRQNum to 0.
2694
f15313bf 2695 Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
1da177e4
LT		 2696 invalid combination.
2697
2698 This function performs initialization of global interrupt modes,
2699 but it does not actually enable global interrupts. To enable
2700 and disable global interrupts use functions sEnGlobalInt() and
2701 sDisGlobalInt(). Enabling of global interrupts is normally not
2702 done until all other initializations are complete.
2703
2704 Even if interrupts are globally enabled, they must also be
2705 individually enabled for each channel that is to generate
2706 interrupts.
2707
2708Warnings: No range checking on any of the parameters is done.
2709
2710 No context switches are allowed while executing this function.
2711
2712 After this function all AIOPs on the controller are disabled,
2713 they can be enabled with sEnAiop().
2714*/
f15313bf
AB		 2715static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
2716 ByteIO_t * AiopIOList, int AiopIOListSize,
2717 WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
2718 int PeriodicOnly, int altChanRingIndicator,
2719 int UPCIRingInd)
1da177e4
LT		 2720{
2721 int i;
2722 ByteIO_t io;
2723
2724 CtlP->AltChanRingIndicator = altChanRingIndicator;
2725 CtlP->UPCIRingInd = UPCIRingInd;
2726 CtlP->CtlNum = CtlNum;
2727 CtlP->CtlID = CTLID_0001; /* controller release 1 */
2728 CtlP->BusType = isPCI; /* controller release 1 */
2729
2730 if (ConfigIO) {
2731 CtlP->isUPCI = 1;
2732 CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL;
2733 CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL;
2734 CtlP->AiopIntrBits = upci_aiop_intr_bits;
2735 } else {
2736 CtlP->isUPCI = 0;
2737 CtlP->PCIIO =
2738 (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC);
2739 CtlP->AiopIntrBits = aiop_intr_bits;
2740 }
2741
2742 sPCIControllerEOI(CtlP); /* clear EOI if warm init */
2743 /* Init AIOPs */
2744 CtlP->NumAiop = 0;
2745 for (i = 0; i < AiopIOListSize; i++) {
2746 io = AiopIOList[i];
2747 CtlP->AiopIO[i] = (WordIO_t) io;
2748 CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
2749
2750 CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */
2751 if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */
2752 break; /* done looking for AIOPs */
2753
2754 CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */
2755 sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */
2756 sOutB(io + _INDX_DATA, sClockPrescale);
2757 CtlP->NumAiop++; /* bump count of AIOPs */
2758 }
2759
2760 if (CtlP->NumAiop == 0)
2761 return (-1);
2762 else
2763 return (CtlP->NumAiop);
2764}
2765
2766/***************************************************************************
2767Function: sReadAiopID
2768Purpose: Read the AIOP idenfication number directly from an AIOP.
2769Call: sReadAiopID(io)
2770 ByteIO_t io: AIOP base I/O address
2771Return: int: Flag AIOPID_XXXX if a valid AIOP is found, where X
2772 is replace by an identifying number.
2773 Flag AIOPID_NULL if no valid AIOP is found
2774Warnings: No context switches are allowed while executing this function.
2775
2776*/
f15313bf 2777static int sReadAiopID(ByteIO_t io)
1da177e4
LT		 2778{
2779 Byte_t AiopID; /* ID byte from AIOP */
2780
2781 sOutB(io + _CMD_REG, RESET_ALL); /* reset AIOP */
2782 sOutB(io + _CMD_REG, 0x0);
2783 AiopID = sInW(io + _CHN_STAT0) & 0x07;
2784 if (AiopID == 0x06)
2785 return (1);
2786 else /* AIOP does not exist */
2787 return (-1);
2788}
2789
2790/***************************************************************************
2791Function: sReadAiopNumChan
2792Purpose: Read the number of channels available in an AIOP directly from
2793 an AIOP.
2794Call: sReadAiopNumChan(io)
2795 WordIO_t io: AIOP base I/O address
2796Return: int: The number of channels available
2797Comments: The number of channels is determined by write/reads from identical
2798 offsets within the SRAM address spaces for channels 0 and 4.
2799 If the channel 4 space is mirrored to channel 0 it is a 4 channel
2800 AIOP, otherwise it is an 8 channel.
2801Warnings: No context switches are allowed while executing this function.
2802*/
f15313bf 2803static int sReadAiopNumChan(WordIO_t io)
1da177e4
LT		 2804{
2805 Word_t x;
2806 static Byte_t R[4] = { 0x00, 0x00, 0x34, 0x12 };
2807
2808 /* write to chan 0 SRAM */
2809 sOutDW((DWordIO_t) io + _INDX_ADDR, *((DWord_t *) & R[0]));
2810 sOutW(io + _INDX_ADDR, 0); /* read from SRAM, chan 0 */
2811 x = sInW(io + _INDX_DATA);
2812 sOutW(io + _INDX_ADDR, 0x4000); /* read from SRAM, chan 4 */
2813 if (x != sInW(io + _INDX_DATA)) /* if different must be 8 chan */
2814 return (8);
2815 else
2816 return (4);
2817}
2818
2819/***************************************************************************
2820Function: sInitChan
2821Purpose: Initialization of a channel and channel structure
2822Call: sInitChan(CtlP,ChP,AiopNum,ChanNum)
2823 CONTROLLER_T *CtlP; Ptr to controller structure
2824 CHANNEL_T *ChP; Ptr to channel structure
2825 int AiopNum; AIOP number within controller
2826 int ChanNum; Channel number within AIOP
f15313bf 2827Return: int: 1 if initialization succeeded, 0 if it fails because channel
1da177e4
LT		 2828 number exceeds number of channels available in AIOP.
2829Comments: This function must be called before a channel can be used.
2830Warnings: No range checking on any of the parameters is done.
2831
2832 No context switches are allowed while executing this function.
2833*/
f15313bf
AB		 2834static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum,
2835 int ChanNum)
1da177e4
LT		 2836{
2837 int i;
2838 WordIO_t AiopIO;
2839 WordIO_t ChIOOff;
2840 Byte_t *ChR;
2841 Word_t ChOff;
2842 static Byte_t R[4];
2843 int brd9600;
2844
2845 if (ChanNum >= CtlP->AiopNumChan[AiopNum])
f15313bf 2846 return 0; /* exceeds num chans in AIOP */
1da177e4
LT		 2847
2848 /* Channel, AIOP, and controller identifiers */
2849 ChP->CtlP = CtlP;
2850 ChP->ChanID = CtlP->AiopID[AiopNum];
2851 ChP->AiopNum = AiopNum;
2852 ChP->ChanNum = ChanNum;
2853
2854 /* Global direct addresses */
2855 AiopIO = CtlP->AiopIO[AiopNum];
2856 ChP->Cmd = (ByteIO_t) AiopIO + _CMD_REG;
2857 ChP->IntChan = (ByteIO_t) AiopIO + _INT_CHAN;
2858 ChP->IntMask = (ByteIO_t) AiopIO + _INT_MASK;
2859 ChP->IndexAddr = (DWordIO_t) AiopIO + _INDX_ADDR;
2860 ChP->IndexData = AiopIO + _INDX_DATA;
2861
2862 /* Channel direct addresses */
2863 ChIOOff = AiopIO + ChP->ChanNum * 2;
2864 ChP->TxRxData = ChIOOff + _TD0;
2865 ChP->ChanStat = ChIOOff + _CHN_STAT0;
2866 ChP->TxRxCount = ChIOOff + _FIFO_CNT0;
2867 ChP->IntID = (ByteIO_t) AiopIO + ChP->ChanNum + _INT_ID0;
2868
2869 /* Initialize the channel from the RData array */
2870 for (i = 0; i < RDATASIZE; i += 4) {
2871 R[0] = RData[i];
2872 R[1] = RData[i + 1] + 0x10 * ChanNum;
2873 R[2] = RData[i + 2];
2874 R[3] = RData[i + 3];
2875 sOutDW(ChP->IndexAddr, *((DWord_t *) & R[0]));
2876 }
2877
2878 ChR = ChP->R;
2879 for (i = 0; i < RREGDATASIZE; i += 4) {
2880 ChR[i] = RRegData[i];
2881 ChR[i + 1] = RRegData[i + 1] + 0x10 * ChanNum;
2882 ChR[i + 2] = RRegData[i + 2];
2883 ChR[i + 3] = RRegData[i + 3];
2884 }
2885
2886 /* Indexed registers */
2887 ChOff = (Word_t) ChanNum *0x1000;
2888
2889 if (sClockPrescale == 0x14)
2890 brd9600 = 47;
2891 else
2892 brd9600 = 23;
2893
2894 ChP->BaudDiv[0] = (Byte_t) (ChOff + _BAUD);
2895 ChP->BaudDiv[1] = (Byte_t) ((ChOff + _BAUD) >> 8);
2896 ChP->BaudDiv[2] = (Byte_t) brd9600;
2897 ChP->BaudDiv[3] = (Byte_t) (brd9600 >> 8);
2898 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->BaudDiv[0]);
2899
2900 ChP->TxControl[0] = (Byte_t) (ChOff + _TX_CTRL);
2901 ChP->TxControl[1] = (Byte_t) ((ChOff + _TX_CTRL) >> 8);
2902 ChP->TxControl[2] = 0;
2903 ChP->TxControl[3] = 0;
2904 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxControl[0]);
2905
2906 ChP->RxControl[0] = (Byte_t) (ChOff + _RX_CTRL);
2907 ChP->RxControl[1] = (Byte_t) ((ChOff + _RX_CTRL) >> 8);
2908 ChP->RxControl[2] = 0;
2909 ChP->RxControl[3] = 0;
2910 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->RxControl[0]);
2911
2912 ChP->TxEnables[0] = (Byte_t) (ChOff + _TX_ENBLS);
2913 ChP->TxEnables[1] = (Byte_t) ((ChOff + _TX_ENBLS) >> 8);
2914 ChP->TxEnables[2] = 0;
2915 ChP->TxEnables[3] = 0;
2916 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxEnables[0]);
2917
2918 ChP->TxCompare[0] = (Byte_t) (ChOff + _TXCMP1);
2919 ChP->TxCompare[1] = (Byte_t) ((ChOff + _TXCMP1) >> 8);
2920 ChP->TxCompare[2] = 0;
2921 ChP->TxCompare[3] = 0;
2922 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxCompare[0]);
2923
2924 ChP->TxReplace1[0] = (Byte_t) (ChOff + _TXREP1B1);
2925 ChP->TxReplace1[1] = (Byte_t) ((ChOff + _TXREP1B1) >> 8);
2926 ChP->TxReplace1[2] = 0;
2927 ChP->TxReplace1[3] = 0;
2928 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxReplace1[0]);
2929
2930 ChP->TxReplace2[0] = (Byte_t) (ChOff + _TXREP2);
2931 ChP->TxReplace2[1] = (Byte_t) ((ChOff + _TXREP2) >> 8);
2932 ChP->TxReplace2[2] = 0;
2933 ChP->TxReplace2[3] = 0;
2934 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxReplace2[0]);
2935
2936 ChP->TxFIFOPtrs = ChOff + _TXF_OUTP;
2937 ChP->TxFIFO = ChOff + _TX_FIFO;
2938
2939 sOutB(ChP->Cmd, (Byte_t) ChanNum | RESTXFCNT); /* apply reset Tx FIFO count */
2940 sOutB(ChP->Cmd, (Byte_t) ChanNum); /* remove reset Tx FIFO count */
2941 sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */
2942 sOutW(ChP->IndexData, 0);
2943 ChP->RxFIFOPtrs = ChOff + _RXF_OUTP;
2944 ChP->RxFIFO = ChOff + _RX_FIFO;
2945
2946 sOutB(ChP->Cmd, (Byte_t) ChanNum | RESRXFCNT); /* apply reset Rx FIFO count */
2947 sOutB(ChP->Cmd, (Byte_t) ChanNum); /* remove reset Rx FIFO count */
2948 sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs); /* clear Rx out ptr */
2949 sOutW(ChP->IndexData, 0);
2950 sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */
2951 sOutW(ChP->IndexData, 0);
2952 ChP->TxPrioCnt = ChOff + _TXP_CNT;
2953 sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioCnt);
2954 sOutB(ChP->IndexData, 0);
2955 ChP->TxPrioPtr = ChOff + _TXP_PNTR;
2956 sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioPtr);
2957 sOutB(ChP->IndexData, 0);
2958 ChP->TxPrioBuf = ChOff + _TXP_BUF;
2959 sEnRxProcessor(ChP); /* start the Rx processor */
2960
f15313bf 2961 return 1;
1da177e4
LT		 2962}
2963
2964/***************************************************************************
2965Function: sStopRxProcessor
2966Purpose: Stop the receive processor from processing a channel.
2967Call: sStopRxProcessor(ChP)
2968 CHANNEL_T *ChP; Ptr to channel structure
2969
2970Comments: The receive processor can be started again with sStartRxProcessor().
2971 This function causes the receive processor to skip over the
2972 stopped channel. It does not stop it from processing other channels.
2973
2974Warnings: No context switches are allowed while executing this function.
2975
2976 Do not leave the receive processor stopped for more than one
2977 character time.
2978
2979 After calling this function a delay of 4 uS is required to ensure
2980 that the receive processor is no longer processing this channel.
2981*/
f15313bf 2982static void sStopRxProcessor(CHANNEL_T * ChP)
1da177e4
LT		 2983{
2984 Byte_t R[4];
2985
2986 R[0] = ChP->R[0];
2987 R[1] = ChP->R[1];
2988 R[2] = 0x0a;
2989 R[3] = ChP->R[3];
2990 sOutDW(ChP->IndexAddr, *(DWord_t *) & R[0]);
2991}
2992
2993/***************************************************************************
2994Function: sFlushRxFIFO
2995Purpose: Flush the Rx FIFO
2996Call: sFlushRxFIFO(ChP)
2997 CHANNEL_T *ChP; Ptr to channel structure
2998Return: void
2999Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
3000 while it is being flushed the receive processor is stopped
3001 and the transmitter is disabled. After these operations a
3002 4 uS delay is done before clearing the pointers to allow
3003 the receive processor to stop. These items are handled inside
3004 this function.
3005Warnings: No context switches are allowed while executing this function.
3006*/
f15313bf 3007static void sFlushRxFIFO(CHANNEL_T * ChP)
1da177e4
LT		 3008{
3009 int i;
3010 Byte_t Ch; /* channel number within AIOP */
f15313bf 3011 int RxFIFOEnabled; /* 1 if Rx FIFO enabled */
1da177e4
LT		 3012
3013 if (sGetRxCnt(ChP) == 0) /* Rx FIFO empty */
3014 return; /* don't need to flush */
3015
f15313bf 3016 RxFIFOEnabled = 0;
1da177e4 3017 if (ChP->R[0x32] == 0x08) { /* Rx FIFO is enabled */
f15313bf 3018 RxFIFOEnabled = 1;
1da177e4
LT		 3019 sDisRxFIFO(ChP); /* disable it */
3020 for (i = 0; i < 2000 / 200; i++) /* delay 2 uS to allow proc to disable FIFO */
3021 sInB(ChP->IntChan); /* depends on bus i/o timing */
3022 }
3023 sGetChanStatus(ChP); /* clear any pending Rx errors in chan stat */
3024 Ch = (Byte_t) sGetChanNum(ChP);
3025 sOutB(ChP->Cmd, Ch | RESRXFCNT); /* apply reset Rx FIFO count */
3026 sOutB(ChP->Cmd, Ch); /* remove reset Rx FIFO count */
3027 sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs); /* clear Rx out ptr */
3028 sOutW(ChP->IndexData, 0);
3029 sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */
3030 sOutW(ChP->IndexData, 0);
3031 if (RxFIFOEnabled)
3032 sEnRxFIFO(ChP); /* enable Rx FIFO */
3033}
3034
3035/***************************************************************************
3036Function: sFlushTxFIFO
3037Purpose: Flush the Tx FIFO
3038Call: sFlushTxFIFO(ChP)
3039 CHANNEL_T *ChP; Ptr to channel structure
3040Return: void
3041Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
3042 while it is being flushed the receive processor is stopped
3043 and the transmitter is disabled. After these operations a
3044 4 uS delay is done before clearing the pointers to allow
3045 the receive processor to stop. These items are handled inside
3046 this function.
3047Warnings: No context switches are allowed while executing this function.
3048*/
f15313bf 3049static void sFlushTxFIFO(CHANNEL_T * ChP)
1da177e4
LT		 3050{
3051 int i;
3052 Byte_t Ch; /* channel number within AIOP */
f15313bf 3053 int TxEnabled; /* 1 if transmitter enabled */
1da177e4
LT		 3054
3055 if (sGetTxCnt(ChP) == 0) /* Tx FIFO empty */
3056 return; /* don't need to flush */
3057
f15313bf 3058 TxEnabled = 0;
1da177e4 3059 if (ChP->TxControl[3] & TX_ENABLE) {
f15313bf 3060 TxEnabled = 1;
1da177e4
LT		 3061 sDisTransmit(ChP); /* disable transmitter */
3062 }
3063 sStopRxProcessor(ChP); /* stop Rx processor */
3064 for (i = 0; i < 4000 / 200; i++) /* delay 4 uS to allow proc to stop */
3065 sInB(ChP->IntChan); /* depends on bus i/o timing */
3066 Ch = (Byte_t) sGetChanNum(ChP);
3067 sOutB(ChP->Cmd, Ch | RESTXFCNT); /* apply reset Tx FIFO count */
3068 sOutB(ChP->Cmd, Ch); /* remove reset Tx FIFO count */
3069 sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */
3070 sOutW(ChP->IndexData, 0);
3071 if (TxEnabled)
3072 sEnTransmit(ChP); /* enable transmitter */
3073 sStartRxProcessor(ChP); /* restart Rx processor */
3074}
3075
3076/***************************************************************************
3077Function: sWriteTxPrioByte
3078Purpose: Write a byte of priority transmit data to a channel
3079Call: sWriteTxPrioByte(ChP,Data)
3080 CHANNEL_T *ChP; Ptr to channel structure
3081 Byte_t Data; The transmit data byte
3082
3083Return: int: 1 if the bytes is successfully written, otherwise 0.
3084
3085Comments: The priority byte is transmitted before any data in the Tx FIFO.
3086
3087Warnings: No context switches are allowed while executing this function.
3088*/
f15313bf 3089static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data)
1da177e4
LT		 3090{
3091 Byte_t DWBuf[4]; /* buffer for double word writes */
3092 Word_t *WordPtr; /* must be far because Win SS != DS */
3093 register DWordIO_t IndexAddr;
3094
3095 if (sGetTxCnt(ChP) > 1) { /* write it to Tx priority buffer */
3096 IndexAddr = ChP->IndexAddr;
3097 sOutW((WordIO_t) IndexAddr, ChP->TxPrioCnt); /* get priority buffer status */
3098 if (sInB((ByteIO_t) ChP->IndexData) & PRI_PEND) /* priority buffer busy */
3099 return (0); /* nothing sent */
3100
3101 WordPtr = (Word_t *) (&DWBuf[0]);
3102 *WordPtr = ChP->TxPrioBuf; /* data byte address */
3103
3104 DWBuf[2] = Data; /* data byte value */
3105 sOutDW(IndexAddr, *((DWord_t *) (&DWBuf[0]))); /* write it out */
3106
3107 *WordPtr = ChP->TxPrioCnt; /* Tx priority count address */
3108
3109 DWBuf[2] = PRI_PEND + 1; /* indicate 1 byte pending */
3110 DWBuf[3] = 0; /* priority buffer pointer */
3111 sOutDW(IndexAddr, *((DWord_t *) (&DWBuf[0]))); /* write it out */
3112 } else { /* write it to Tx FIFO */
3113
3114 sWriteTxByte(sGetTxRxDataIO(ChP), Data);
3115 }
3116 return (1); /* 1 byte sent */
3117}
3118
3119/***************************************************************************
3120Function: sEnInterrupts
3121Purpose: Enable one or more interrupts for a channel
3122Call: sEnInterrupts(ChP,Flags)
3123 CHANNEL_T *ChP; Ptr to channel structure
3124 Word_t Flags: Interrupt enable flags, can be any combination
3125 of the following flags:
3126 TXINT_EN: Interrupt on Tx FIFO empty
3127 RXINT_EN: Interrupt on Rx FIFO at trigger level (see
3128 sSetRxTrigger())
3129 SRCINT_EN: Interrupt on SRC (Special Rx Condition)
3130 MCINT_EN: Interrupt on modem input change
3131 CHANINT_EN: Allow channel interrupt signal to the AIOP's
3132 Interrupt Channel Register.
3133Return: void
3134Comments: If an interrupt enable flag is set in Flags, that interrupt will be
3135 enabled. If an interrupt enable flag is not set in Flags, that
3136 interrupt will not be changed. Interrupts can be disabled with
3137 function sDisInterrupts().
3138
3139 This function sets the appropriate bit for the channel in the AIOP's
3140 Interrupt Mask Register if the CHANINT_EN flag is set. This allows
3141 this channel's bit to be set in the AIOP's Interrupt Channel Register.
3142
3143 Interrupts must also be globally enabled before channel interrupts
3144 will be passed on to the host. This is done with function
3145 sEnGlobalInt().
3146
3147 In some cases it may be desirable to disable interrupts globally but
3148 enable channel interrupts. This would allow the global interrupt
3149 status register to be used to determine which AIOPs need service.
3150*/
f15313bf 3151static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags)
1da177e4
LT		 3152{
3153 Byte_t Mask; /* Interrupt Mask Register */
3154
3155 ChP->RxControl[2] |=
3156 ((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
3157
3158 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->RxControl[0]);
3159
3160 ChP->TxControl[2] |= ((Byte_t) Flags & TXINT_EN);
3161
3162 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxControl[0]);
3163
3164 if (Flags & CHANINT_EN) {
3165 Mask = sInB(ChP->IntMask) | sBitMapSetTbl[ChP->ChanNum];
3166 sOutB(ChP->IntMask, Mask);
3167 }
3168}
3169
3170/***************************************************************************
3171Function: sDisInterrupts
3172Purpose: Disable one or more interrupts for a channel
3173Call: sDisInterrupts(ChP,Flags)
3174 CHANNEL_T *ChP; Ptr to channel structure
3175 Word_t Flags: Interrupt flags, can be any combination
3176 of the following flags:
3177 TXINT_EN: Interrupt on Tx FIFO empty
3178 RXINT_EN: Interrupt on Rx FIFO at trigger level (see
3179 sSetRxTrigger())
3180 SRCINT_EN: Interrupt on SRC (Special Rx Condition)
3181 MCINT_EN: Interrupt on modem input change
3182 CHANINT_EN: Disable channel interrupt signal to the
3183 AIOP's Interrupt Channel Register.
3184Return: void
3185Comments: If an interrupt flag is set in Flags, that interrupt will be
3186 disabled. If an interrupt flag is not set in Flags, that
3187 interrupt will not be changed. Interrupts can be enabled with
3188 function sEnInterrupts().
3189
3190 This function clears the appropriate bit for the channel in the AIOP's
3191 Interrupt Mask Register if the CHANINT_EN flag is set. This blocks
3192 this channel's bit from being set in the AIOP's Interrupt Channel
3193 Register.
3194*/
f15313bf 3195static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags)
1da177e4
LT		 3196{
3197 Byte_t Mask; /* Interrupt Mask Register */
3198
3199 ChP->RxControl[2] &=
3200 ~((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
3201 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->RxControl[0]);
3202 ChP->TxControl[2] &= ~((Byte_t) Flags & TXINT_EN);
3203 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxControl[0]);
3204
3205 if (Flags & CHANINT_EN) {
3206 Mask = sInB(ChP->IntMask) & sBitMapClrTbl[ChP->ChanNum];
3207 sOutB(ChP->IntMask, Mask);
3208 }
3209}
3210
f15313bf 3211static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode)
1da177e4
LT		 3212{
3213 sOutB(ChP->CtlP->AiopIO[2], (mode & 0x18) | ChP->ChanNum);
3214}
3215
3216/*
3217 * Not an official SSCI function, but how to reset RocketModems.
3218 * ISA bus version
3219 */
f15313bf 3220static void sModemReset(CONTROLLER_T * CtlP, int chan, int on)
1da177e4
LT		 3221{
3222 ByteIO_t addr;
3223 Byte_t val;
3224
3225 addr = CtlP->AiopIO[0] + 0x400;
3226 val = sInB(CtlP->MReg3IO);
3227 /* if AIOP[1] is not enabled, enable it */
3228 if ((val & 2) == 0) {
3229 val = sInB(CtlP->MReg2IO);
3230 sOutB(CtlP->MReg2IO, (val & 0xfc) | (1 & 0x03));
3231 sOutB(CtlP->MBaseIO, (unsigned char) (addr >> 6));
3232 }
3233
3234 sEnAiop(CtlP, 1);
3235 if (!on)
3236 addr += 8;
3237 sOutB(addr + chan, 0); /* apply or remove reset */
3238 sDisAiop(CtlP, 1);
3239}
3240
3241/*
3242 * Not an official SSCI function, but how to reset RocketModems.
3243 * PCI bus version
3244 */
f15313bf 3245static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on)
1da177e4
LT		 3246{
3247 ByteIO_t addr;
3248
3249 addr = CtlP->AiopIO[0] + 0x40; /* 2nd AIOP */
3250 if (!on)
3251 addr += 8;
3252 sOutB(addr + chan, 0); /* apply or remove reset */
3253}
3254
3255/* Resets the speaker controller on RocketModem II and III devices */
3256static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model)
3257{
3258 ByteIO_t addr;
3259
3260 /* RocketModem II speaker control is at the 8th port location of offset 0x40 */
3261 if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) {
3262 addr = CtlP->AiopIO[0] + 0x4F;
3263 sOutB(addr, 0);
3264 }
3265
3266 /* RocketModem III speaker control is at the 1st port location of offset 0x80 */
3267 if ((model == MODEL_UPCI_RM3_8PORT)
3268 || (model == MODEL_UPCI_RM3_4PORT)) {
3269 addr = CtlP->AiopIO[0] + 0x88;
3270 sOutB(addr, 0);
3271 }
3272}
3273
3274/* Returns the line number given the controller (board), aiop and channel number */
3275static unsigned char GetLineNumber(int ctrl, int aiop, int ch)
3276{
3277 return lineNumbers[(ctrl << 5) | (aiop << 3) | ch];
3278}
3279
3280/*
3281 * Stores the line number associated with a given controller (board), aiop
3282 * and channel number.
3283 * Returns: The line number assigned
3284 */
3285static unsigned char SetLineNumber(int ctrl, int aiop, int ch)
3286{
3287 lineNumbers[(ctrl << 5) | (aiop << 3) | ch] = nextLineNumber++;
3288 return (nextLineNumber - 1);
3289}
Linux kernel - Deliverables
This page took 0.629125 seconds and 5 git commands to generate.