Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
7f3edb94 | 2 | * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $ |
1da177e4 LT |
3 | * |
4 | * Device driver for Microgate SyncLink Multiport | |
5 | * high speed multiprotocol serial adapter. | |
6 | * | |
7 | * written by Paul Fulghum for Microgate Corporation | |
8 | * paulkf@microgate.com | |
9 | * | |
10 | * Microgate and SyncLink are trademarks of Microgate Corporation | |
11 | * | |
12 | * Derived from serial.c written by Theodore Ts'o and Linus Torvalds | |
13 | * This code is released under the GNU General Public License (GPL) | |
14 | * | |
15 | * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | |
16 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES | |
17 | * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
18 | * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, | |
19 | * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
20 | * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
21 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
22 | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
23 | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | |
24 | * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED | |
25 | * OF THE POSSIBILITY OF SUCH DAMAGE. | |
26 | */ | |
27 | ||
28 | #define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq)) | |
29 | #if defined(__i386__) | |
30 | # define BREAKPOINT() asm(" int $3"); | |
31 | #else | |
32 | # define BREAKPOINT() { } | |
33 | #endif | |
34 | ||
35 | #define MAX_DEVICES 12 | |
36 | ||
1da177e4 LT |
37 | #include <linux/module.h> |
38 | #include <linux/errno.h> | |
39 | #include <linux/signal.h> | |
40 | #include <linux/sched.h> | |
41 | #include <linux/timer.h> | |
42 | #include <linux/interrupt.h> | |
43 | #include <linux/pci.h> | |
44 | #include <linux/tty.h> | |
45 | #include <linux/tty_flip.h> | |
46 | #include <linux/serial.h> | |
47 | #include <linux/major.h> | |
48 | #include <linux/string.h> | |
49 | #include <linux/fcntl.h> | |
50 | #include <linux/ptrace.h> | |
51 | #include <linux/ioport.h> | |
52 | #include <linux/mm.h> | |
53 | #include <linux/slab.h> | |
54 | #include <linux/netdevice.h> | |
55 | #include <linux/vmalloc.h> | |
56 | #include <linux/init.h> | |
1da177e4 LT |
57 | #include <linux/delay.h> |
58 | #include <linux/ioctl.h> | |
59 | ||
60 | #include <asm/system.h> | |
61 | #include <asm/io.h> | |
62 | #include <asm/irq.h> | |
63 | #include <asm/dma.h> | |
64 | #include <linux/bitops.h> | |
65 | #include <asm/types.h> | |
66 | #include <linux/termios.h> | |
67 | #include <linux/workqueue.h> | |
68 | #include <linux/hdlc.h> | |
3dd1247f | 69 | #include <linux/synclink.h> |
1da177e4 | 70 | |
af69c7f9 PF |
71 | #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE)) |
72 | #define SYNCLINK_GENERIC_HDLC 1 | |
73 | #else | |
74 | #define SYNCLINK_GENERIC_HDLC 0 | |
1da177e4 LT |
75 | #endif |
76 | ||
77 | #define GET_USER(error,value,addr) error = get_user(value,addr) | |
78 | #define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0 | |
79 | #define PUT_USER(error,value,addr) error = put_user(value,addr) | |
80 | #define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0 | |
81 | ||
82 | #include <asm/uaccess.h> | |
83 | ||
1da177e4 LT |
84 | static MGSL_PARAMS default_params = { |
85 | MGSL_MODE_HDLC, /* unsigned long mode */ | |
86 | 0, /* unsigned char loopback; */ | |
87 | HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */ | |
88 | HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */ | |
89 | 0, /* unsigned long clock_speed; */ | |
90 | 0xff, /* unsigned char addr_filter; */ | |
91 | HDLC_CRC_16_CCITT, /* unsigned short crc_type; */ | |
92 | HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */ | |
93 | HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */ | |
94 | 9600, /* unsigned long data_rate; */ | |
95 | 8, /* unsigned char data_bits; */ | |
96 | 1, /* unsigned char stop_bits; */ | |
97 | ASYNC_PARITY_NONE /* unsigned char parity; */ | |
98 | }; | |
99 | ||
100 | /* size in bytes of DMA data buffers */ | |
101 | #define SCABUFSIZE 1024 | |
102 | #define SCA_MEM_SIZE 0x40000 | |
103 | #define SCA_BASE_SIZE 512 | |
104 | #define SCA_REG_SIZE 16 | |
105 | #define SCA_MAX_PORTS 4 | |
106 | #define SCAMAXDESC 128 | |
107 | ||
108 | #define BUFFERLISTSIZE 4096 | |
109 | ||
110 | /* SCA-I style DMA buffer descriptor */ | |
111 | typedef struct _SCADESC | |
112 | { | |
113 | u16 next; /* lower l6 bits of next descriptor addr */ | |
114 | u16 buf_ptr; /* lower 16 bits of buffer addr */ | |
115 | u8 buf_base; /* upper 8 bits of buffer addr */ | |
116 | u8 pad1; | |
117 | u16 length; /* length of buffer */ | |
118 | u8 status; /* status of buffer */ | |
119 | u8 pad2; | |
120 | } SCADESC, *PSCADESC; | |
121 | ||
122 | typedef struct _SCADESC_EX | |
123 | { | |
124 | /* device driver bookkeeping section */ | |
125 | char *virt_addr; /* virtual address of data buffer */ | |
126 | u16 phys_entry; /* lower 16-bits of physical address of this descriptor */ | |
127 | } SCADESC_EX, *PSCADESC_EX; | |
128 | ||
129 | /* The queue of BH actions to be performed */ | |
130 | ||
131 | #define BH_RECEIVE 1 | |
132 | #define BH_TRANSMIT 2 | |
133 | #define BH_STATUS 4 | |
134 | ||
135 | #define IO_PIN_SHUTDOWN_LIMIT 100 | |
136 | ||
1da177e4 LT |
137 | struct _input_signal_events { |
138 | int ri_up; | |
139 | int ri_down; | |
140 | int dsr_up; | |
141 | int dsr_down; | |
142 | int dcd_up; | |
143 | int dcd_down; | |
144 | int cts_up; | |
145 | int cts_down; | |
146 | }; | |
147 | ||
148 | /* | |
149 | * Device instance data structure | |
150 | */ | |
151 | typedef struct _synclinkmp_info { | |
152 | void *if_ptr; /* General purpose pointer (used by SPPP) */ | |
153 | int magic; | |
154 | int flags; | |
155 | int count; /* count of opens */ | |
156 | int line; | |
157 | unsigned short close_delay; | |
158 | unsigned short closing_wait; /* time to wait before closing */ | |
159 | ||
160 | struct mgsl_icount icount; | |
161 | ||
162 | struct tty_struct *tty; | |
163 | int timeout; | |
164 | int x_char; /* xon/xoff character */ | |
165 | int blocked_open; /* # of blocked opens */ | |
166 | u16 read_status_mask1; /* break detection (SR1 indications) */ | |
167 | u16 read_status_mask2; /* parity/framing/overun (SR2 indications) */ | |
168 | unsigned char ignore_status_mask1; /* break detection (SR1 indications) */ | |
169 | unsigned char ignore_status_mask2; /* parity/framing/overun (SR2 indications) */ | |
170 | unsigned char *tx_buf; | |
171 | int tx_put; | |
172 | int tx_get; | |
173 | int tx_count; | |
174 | ||
175 | wait_queue_head_t open_wait; | |
176 | wait_queue_head_t close_wait; | |
177 | ||
178 | wait_queue_head_t status_event_wait_q; | |
179 | wait_queue_head_t event_wait_q; | |
180 | struct timer_list tx_timer; /* HDLC transmit timeout timer */ | |
181 | struct _synclinkmp_info *next_device; /* device list link */ | |
182 | struct timer_list status_timer; /* input signal status check timer */ | |
183 | ||
184 | spinlock_t lock; /* spinlock for synchronizing with ISR */ | |
185 | struct work_struct task; /* task structure for scheduling bh */ | |
186 | ||
187 | u32 max_frame_size; /* as set by device config */ | |
188 | ||
189 | u32 pending_bh; | |
190 | ||
0fab6de0 | 191 | bool bh_running; /* Protection from multiple */ |
1da177e4 | 192 | int isr_overflow; |
0fab6de0 | 193 | bool bh_requested; |
1da177e4 LT |
194 | |
195 | int dcd_chkcount; /* check counts to prevent */ | |
196 | int cts_chkcount; /* too many IRQs if a signal */ | |
197 | int dsr_chkcount; /* is floating */ | |
198 | int ri_chkcount; | |
199 | ||
200 | char *buffer_list; /* virtual address of Rx & Tx buffer lists */ | |
201 | unsigned long buffer_list_phys; | |
202 | ||
203 | unsigned int rx_buf_count; /* count of total allocated Rx buffers */ | |
204 | SCADESC *rx_buf_list; /* list of receive buffer entries */ | |
205 | SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */ | |
206 | unsigned int current_rx_buf; | |
207 | ||
208 | unsigned int tx_buf_count; /* count of total allocated Tx buffers */ | |
209 | SCADESC *tx_buf_list; /* list of transmit buffer entries */ | |
210 | SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */ | |
211 | unsigned int last_tx_buf; | |
212 | ||
213 | unsigned char *tmp_rx_buf; | |
214 | unsigned int tmp_rx_buf_count; | |
215 | ||
0fab6de0 JP |
216 | bool rx_enabled; |
217 | bool rx_overflow; | |
1da177e4 | 218 | |
0fab6de0 JP |
219 | bool tx_enabled; |
220 | bool tx_active; | |
1da177e4 LT |
221 | u32 idle_mode; |
222 | ||
223 | unsigned char ie0_value; | |
224 | unsigned char ie1_value; | |
225 | unsigned char ie2_value; | |
226 | unsigned char ctrlreg_value; | |
227 | unsigned char old_signals; | |
228 | ||
229 | char device_name[25]; /* device instance name */ | |
230 | ||
231 | int port_count; | |
232 | int adapter_num; | |
233 | int port_num; | |
234 | ||
235 | struct _synclinkmp_info *port_array[SCA_MAX_PORTS]; | |
236 | ||
237 | unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */ | |
238 | ||
239 | unsigned int irq_level; /* interrupt level */ | |
240 | unsigned long irq_flags; | |
0fab6de0 | 241 | bool irq_requested; /* true if IRQ requested */ |
1da177e4 LT |
242 | |
243 | MGSL_PARAMS params; /* communications parameters */ | |
244 | ||
245 | unsigned char serial_signals; /* current serial signal states */ | |
246 | ||
0fab6de0 | 247 | bool irq_occurred; /* for diagnostics use */ |
1da177e4 LT |
248 | unsigned int init_error; /* Initialization startup error */ |
249 | ||
250 | u32 last_mem_alloc; | |
251 | unsigned char* memory_base; /* shared memory address (PCI only) */ | |
252 | u32 phys_memory_base; | |
253 | int shared_mem_requested; | |
254 | ||
255 | unsigned char* sca_base; /* HD64570 SCA Memory address */ | |
256 | u32 phys_sca_base; | |
257 | u32 sca_offset; | |
0fab6de0 | 258 | bool sca_base_requested; |
1da177e4 LT |
259 | |
260 | unsigned char* lcr_base; /* local config registers (PCI only) */ | |
261 | u32 phys_lcr_base; | |
262 | u32 lcr_offset; | |
263 | int lcr_mem_requested; | |
264 | ||
265 | unsigned char* statctrl_base; /* status/control register memory */ | |
266 | u32 phys_statctrl_base; | |
267 | u32 statctrl_offset; | |
0fab6de0 | 268 | bool sca_statctrl_requested; |
1da177e4 LT |
269 | |
270 | u32 misc_ctrl_value; | |
271 | char flag_buf[MAX_ASYNC_BUFFER_SIZE]; | |
272 | char char_buf[MAX_ASYNC_BUFFER_SIZE]; | |
0fab6de0 | 273 | bool drop_rts_on_tx_done; |
1da177e4 LT |
274 | |
275 | struct _input_signal_events input_signal_events; | |
276 | ||
277 | /* SPPP/Cisco HDLC device parts */ | |
278 | int netcount; | |
279 | int dosyncppp; | |
280 | spinlock_t netlock; | |
281 | ||
af69c7f9 | 282 | #if SYNCLINK_GENERIC_HDLC |
1da177e4 LT |
283 | struct net_device *netdev; |
284 | #endif | |
285 | ||
286 | } SLMP_INFO; | |
287 | ||
288 | #define MGSL_MAGIC 0x5401 | |
289 | ||
290 | /* | |
291 | * define serial signal status change macros | |
292 | */ | |
293 | #define MISCSTATUS_DCD_LATCHED (SerialSignal_DCD<<8) /* indicates change in DCD */ | |
294 | #define MISCSTATUS_RI_LATCHED (SerialSignal_RI<<8) /* indicates change in RI */ | |
295 | #define MISCSTATUS_CTS_LATCHED (SerialSignal_CTS<<8) /* indicates change in CTS */ | |
296 | #define MISCSTATUS_DSR_LATCHED (SerialSignal_DSR<<8) /* change in DSR */ | |
297 | ||
298 | /* Common Register macros */ | |
299 | #define LPR 0x00 | |
300 | #define PABR0 0x02 | |
301 | #define PABR1 0x03 | |
302 | #define WCRL 0x04 | |
303 | #define WCRM 0x05 | |
304 | #define WCRH 0x06 | |
305 | #define DPCR 0x08 | |
306 | #define DMER 0x09 | |
307 | #define ISR0 0x10 | |
308 | #define ISR1 0x11 | |
309 | #define ISR2 0x12 | |
310 | #define IER0 0x14 | |
311 | #define IER1 0x15 | |
312 | #define IER2 0x16 | |
313 | #define ITCR 0x18 | |
314 | #define INTVR 0x1a | |
315 | #define IMVR 0x1c | |
316 | ||
317 | /* MSCI Register macros */ | |
318 | #define TRB 0x20 | |
319 | #define TRBL 0x20 | |
320 | #define TRBH 0x21 | |
321 | #define SR0 0x22 | |
322 | #define SR1 0x23 | |
323 | #define SR2 0x24 | |
324 | #define SR3 0x25 | |
325 | #define FST 0x26 | |
326 | #define IE0 0x28 | |
327 | #define IE1 0x29 | |
328 | #define IE2 0x2a | |
329 | #define FIE 0x2b | |
330 | #define CMD 0x2c | |
331 | #define MD0 0x2e | |
332 | #define MD1 0x2f | |
333 | #define MD2 0x30 | |
334 | #define CTL 0x31 | |
335 | #define SA0 0x32 | |
336 | #define SA1 0x33 | |
337 | #define IDL 0x34 | |
338 | #define TMC 0x35 | |
339 | #define RXS 0x36 | |
340 | #define TXS 0x37 | |
341 | #define TRC0 0x38 | |
342 | #define TRC1 0x39 | |
343 | #define RRC 0x3a | |
344 | #define CST0 0x3c | |
345 | #define CST1 0x3d | |
346 | ||
347 | /* Timer Register Macros */ | |
348 | #define TCNT 0x60 | |
349 | #define TCNTL 0x60 | |
350 | #define TCNTH 0x61 | |
351 | #define TCONR 0x62 | |
352 | #define TCONRL 0x62 | |
353 | #define TCONRH 0x63 | |
354 | #define TMCS 0x64 | |
355 | #define TEPR 0x65 | |
356 | ||
357 | /* DMA Controller Register macros */ | |
358 | #define DARL 0x80 | |
359 | #define DARH 0x81 | |
360 | #define DARB 0x82 | |
361 | #define BAR 0x80 | |
362 | #define BARL 0x80 | |
363 | #define BARH 0x81 | |
364 | #define BARB 0x82 | |
365 | #define SAR 0x84 | |
366 | #define SARL 0x84 | |
367 | #define SARH 0x85 | |
368 | #define SARB 0x86 | |
369 | #define CPB 0x86 | |
370 | #define CDA 0x88 | |
371 | #define CDAL 0x88 | |
372 | #define CDAH 0x89 | |
373 | #define EDA 0x8a | |
374 | #define EDAL 0x8a | |
375 | #define EDAH 0x8b | |
376 | #define BFL 0x8c | |
377 | #define BFLL 0x8c | |
378 | #define BFLH 0x8d | |
379 | #define BCR 0x8e | |
380 | #define BCRL 0x8e | |
381 | #define BCRH 0x8f | |
382 | #define DSR 0x90 | |
383 | #define DMR 0x91 | |
384 | #define FCT 0x93 | |
385 | #define DIR 0x94 | |
386 | #define DCMD 0x95 | |
387 | ||
388 | /* combine with timer or DMA register address */ | |
389 | #define TIMER0 0x00 | |
390 | #define TIMER1 0x08 | |
391 | #define TIMER2 0x10 | |
392 | #define TIMER3 0x18 | |
393 | #define RXDMA 0x00 | |
394 | #define TXDMA 0x20 | |
395 | ||
396 | /* SCA Command Codes */ | |
397 | #define NOOP 0x00 | |
398 | #define TXRESET 0x01 | |
399 | #define TXENABLE 0x02 | |
400 | #define TXDISABLE 0x03 | |
401 | #define TXCRCINIT 0x04 | |
402 | #define TXCRCEXCL 0x05 | |
403 | #define TXEOM 0x06 | |
404 | #define TXABORT 0x07 | |
405 | #define MPON 0x08 | |
406 | #define TXBUFCLR 0x09 | |
407 | #define RXRESET 0x11 | |
408 | #define RXENABLE 0x12 | |
409 | #define RXDISABLE 0x13 | |
410 | #define RXCRCINIT 0x14 | |
411 | #define RXREJECT 0x15 | |
412 | #define SEARCHMP 0x16 | |
413 | #define RXCRCEXCL 0x17 | |
414 | #define RXCRCCALC 0x18 | |
415 | #define CHRESET 0x21 | |
416 | #define HUNT 0x31 | |
417 | ||
418 | /* DMA command codes */ | |
419 | #define SWABORT 0x01 | |
420 | #define FEICLEAR 0x02 | |
421 | ||
422 | /* IE0 */ | |
423 | #define TXINTE BIT7 | |
424 | #define RXINTE BIT6 | |
425 | #define TXRDYE BIT1 | |
426 | #define RXRDYE BIT0 | |
427 | ||
428 | /* IE1 & SR1 */ | |
429 | #define UDRN BIT7 | |
430 | #define IDLE BIT6 | |
431 | #define SYNCD BIT4 | |
432 | #define FLGD BIT4 | |
433 | #define CCTS BIT3 | |
434 | #define CDCD BIT2 | |
435 | #define BRKD BIT1 | |
436 | #define ABTD BIT1 | |
437 | #define GAPD BIT1 | |
438 | #define BRKE BIT0 | |
439 | #define IDLD BIT0 | |
440 | ||
441 | /* IE2 & SR2 */ | |
442 | #define EOM BIT7 | |
443 | #define PMP BIT6 | |
444 | #define SHRT BIT6 | |
445 | #define PE BIT5 | |
446 | #define ABT BIT5 | |
447 | #define FRME BIT4 | |
448 | #define RBIT BIT4 | |
449 | #define OVRN BIT3 | |
450 | #define CRCE BIT2 | |
451 | ||
452 | ||
453 | /* | |
454 | * Global linked list of SyncLink devices | |
455 | */ | |
456 | static SLMP_INFO *synclinkmp_device_list = NULL; | |
457 | static int synclinkmp_adapter_count = -1; | |
458 | static int synclinkmp_device_count = 0; | |
459 | ||
460 | /* | |
461 | * Set this param to non-zero to load eax with the | |
462 | * .text section address and breakpoint on module load. | |
463 | * This is useful for use with gdb and add-symbol-file command. | |
464 | */ | |
465 | static int break_on_load=0; | |
466 | ||
467 | /* | |
468 | * Driver major number, defaults to zero to get auto | |
469 | * assigned major number. May be forced as module parameter. | |
470 | */ | |
471 | static int ttymajor=0; | |
472 | ||
473 | /* | |
474 | * Array of user specified options for ISA adapters. | |
475 | */ | |
476 | static int debug_level = 0; | |
477 | static int maxframe[MAX_DEVICES] = {0,}; | |
478 | static int dosyncppp[MAX_DEVICES] = {0,}; | |
479 | ||
480 | module_param(break_on_load, bool, 0); | |
481 | module_param(ttymajor, int, 0); | |
482 | module_param(debug_level, int, 0); | |
483 | module_param_array(maxframe, int, NULL, 0); | |
484 | module_param_array(dosyncppp, int, NULL, 0); | |
485 | ||
486 | static char *driver_name = "SyncLink MultiPort driver"; | |
7f3edb94 | 487 | static char *driver_version = "$Revision: 4.38 $"; |
1da177e4 LT |
488 | |
489 | static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent); | |
490 | static void synclinkmp_remove_one(struct pci_dev *dev); | |
491 | ||
492 | static struct pci_device_id synclinkmp_pci_tbl[] = { | |
493 | { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, }, | |
494 | { 0, }, /* terminate list */ | |
495 | }; | |
496 | MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl); | |
497 | ||
498 | MODULE_LICENSE("GPL"); | |
499 | ||
500 | static struct pci_driver synclinkmp_pci_driver = { | |
501 | .name = "synclinkmp", | |
502 | .id_table = synclinkmp_pci_tbl, | |
503 | .probe = synclinkmp_init_one, | |
504 | .remove = __devexit_p(synclinkmp_remove_one), | |
505 | }; | |
506 | ||
507 | ||
508 | static struct tty_driver *serial_driver; | |
509 | ||
510 | /* number of characters left in xmit buffer before we ask for more */ | |
511 | #define WAKEUP_CHARS 256 | |
512 | ||
513 | ||
514 | /* tty callbacks */ | |
515 | ||
516 | static int open(struct tty_struct *tty, struct file * filp); | |
517 | static void close(struct tty_struct *tty, struct file * filp); | |
518 | static void hangup(struct tty_struct *tty); | |
606d099c | 519 | static void set_termios(struct tty_struct *tty, struct ktermios *old_termios); |
1da177e4 LT |
520 | |
521 | static int write(struct tty_struct *tty, const unsigned char *buf, int count); | |
522 | static void put_char(struct tty_struct *tty, unsigned char ch); | |
523 | static void send_xchar(struct tty_struct *tty, char ch); | |
524 | static void wait_until_sent(struct tty_struct *tty, int timeout); | |
525 | static int write_room(struct tty_struct *tty); | |
526 | static void flush_chars(struct tty_struct *tty); | |
527 | static void flush_buffer(struct tty_struct *tty); | |
528 | static void tx_hold(struct tty_struct *tty); | |
529 | static void tx_release(struct tty_struct *tty); | |
530 | ||
531 | static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); | |
532 | static int read_proc(char *page, char **start, off_t off, int count,int *eof, void *data); | |
533 | static int chars_in_buffer(struct tty_struct *tty); | |
534 | static void throttle(struct tty_struct * tty); | |
535 | static void unthrottle(struct tty_struct * tty); | |
536 | static void set_break(struct tty_struct *tty, int break_state); | |
537 | ||
af69c7f9 | 538 | #if SYNCLINK_GENERIC_HDLC |
1da177e4 LT |
539 | #define dev_to_port(D) (dev_to_hdlc(D)->priv) |
540 | static void hdlcdev_tx_done(SLMP_INFO *info); | |
541 | static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size); | |
542 | static int hdlcdev_init(SLMP_INFO *info); | |
543 | static void hdlcdev_exit(SLMP_INFO *info); | |
544 | #endif | |
545 | ||
546 | /* ioctl handlers */ | |
547 | ||
548 | static int get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount); | |
549 | static int get_params(SLMP_INFO *info, MGSL_PARAMS __user *params); | |
550 | static int set_params(SLMP_INFO *info, MGSL_PARAMS __user *params); | |
551 | static int get_txidle(SLMP_INFO *info, int __user *idle_mode); | |
552 | static int set_txidle(SLMP_INFO *info, int idle_mode); | |
553 | static int tx_enable(SLMP_INFO *info, int enable); | |
554 | static int tx_abort(SLMP_INFO *info); | |
555 | static int rx_enable(SLMP_INFO *info, int enable); | |
1da177e4 LT |
556 | static int modem_input_wait(SLMP_INFO *info,int arg); |
557 | static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr); | |
558 | static int tiocmget(struct tty_struct *tty, struct file *file); | |
559 | static int tiocmset(struct tty_struct *tty, struct file *file, | |
560 | unsigned int set, unsigned int clear); | |
561 | static void set_break(struct tty_struct *tty, int break_state); | |
562 | ||
563 | static void add_device(SLMP_INFO *info); | |
564 | static void device_init(int adapter_num, struct pci_dev *pdev); | |
565 | static int claim_resources(SLMP_INFO *info); | |
566 | static void release_resources(SLMP_INFO *info); | |
567 | ||
568 | static int startup(SLMP_INFO *info); | |
569 | static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info); | |
570 | static void shutdown(SLMP_INFO *info); | |
571 | static void program_hw(SLMP_INFO *info); | |
572 | static void change_params(SLMP_INFO *info); | |
573 | ||
0fab6de0 JP |
574 | static bool init_adapter(SLMP_INFO *info); |
575 | static bool register_test(SLMP_INFO *info); | |
576 | static bool irq_test(SLMP_INFO *info); | |
577 | static bool loopback_test(SLMP_INFO *info); | |
1da177e4 | 578 | static int adapter_test(SLMP_INFO *info); |
0fab6de0 | 579 | static bool memory_test(SLMP_INFO *info); |
1da177e4 LT |
580 | |
581 | static void reset_adapter(SLMP_INFO *info); | |
582 | static void reset_port(SLMP_INFO *info); | |
583 | static void async_mode(SLMP_INFO *info); | |
584 | static void hdlc_mode(SLMP_INFO *info); | |
585 | ||
586 | static void rx_stop(SLMP_INFO *info); | |
587 | static void rx_start(SLMP_INFO *info); | |
588 | static void rx_reset_buffers(SLMP_INFO *info); | |
589 | static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last); | |
0fab6de0 | 590 | static bool rx_get_frame(SLMP_INFO *info); |
1da177e4 LT |
591 | |
592 | static void tx_start(SLMP_INFO *info); | |
593 | static void tx_stop(SLMP_INFO *info); | |
594 | static void tx_load_fifo(SLMP_INFO *info); | |
595 | static void tx_set_idle(SLMP_INFO *info); | |
596 | static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count); | |
597 | ||
598 | static void get_signals(SLMP_INFO *info); | |
599 | static void set_signals(SLMP_INFO *info); | |
600 | static void enable_loopback(SLMP_INFO *info, int enable); | |
601 | static void set_rate(SLMP_INFO *info, u32 data_rate); | |
602 | ||
603 | static int bh_action(SLMP_INFO *info); | |
c4028958 | 604 | static void bh_handler(struct work_struct *work); |
1da177e4 LT |
605 | static void bh_receive(SLMP_INFO *info); |
606 | static void bh_transmit(SLMP_INFO *info); | |
607 | static void bh_status(SLMP_INFO *info); | |
608 | static void isr_timer(SLMP_INFO *info); | |
609 | static void isr_rxint(SLMP_INFO *info); | |
610 | static void isr_rxrdy(SLMP_INFO *info); | |
611 | static void isr_txint(SLMP_INFO *info); | |
612 | static void isr_txrdy(SLMP_INFO *info); | |
613 | static void isr_rxdmaok(SLMP_INFO *info); | |
614 | static void isr_rxdmaerror(SLMP_INFO *info); | |
615 | static void isr_txdmaok(SLMP_INFO *info); | |
616 | static void isr_txdmaerror(SLMP_INFO *info); | |
617 | static void isr_io_pin(SLMP_INFO *info, u16 status); | |
618 | ||
619 | static int alloc_dma_bufs(SLMP_INFO *info); | |
620 | static void free_dma_bufs(SLMP_INFO *info); | |
621 | static int alloc_buf_list(SLMP_INFO *info); | |
622 | static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count); | |
623 | static int alloc_tmp_rx_buf(SLMP_INFO *info); | |
624 | static void free_tmp_rx_buf(SLMP_INFO *info); | |
625 | ||
626 | static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count); | |
627 | static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit); | |
628 | static void tx_timeout(unsigned long context); | |
629 | static void status_timeout(unsigned long context); | |
630 | ||
631 | static unsigned char read_reg(SLMP_INFO *info, unsigned char addr); | |
632 | static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val); | |
633 | static u16 read_reg16(SLMP_INFO *info, unsigned char addr); | |
634 | static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val); | |
635 | static unsigned char read_status_reg(SLMP_INFO * info); | |
636 | static void write_control_reg(SLMP_INFO * info); | |
637 | ||
638 | ||
639 | static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes | |
640 | static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes | |
641 | static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes | |
642 | ||
643 | static u32 misc_ctrl_value = 0x007e4040; | |
761a444d | 644 | static u32 lcr1_brdr_value = 0x00800028; |
1da177e4 LT |
645 | |
646 | static u32 read_ahead_count = 8; | |
647 | ||
648 | /* DPCR, DMA Priority Control | |
649 | * | |
650 | * 07..05 Not used, must be 0 | |
651 | * 04 BRC, bus release condition: 0=all transfers complete | |
652 | * 1=release after 1 xfer on all channels | |
653 | * 03 CCC, channel change condition: 0=every cycle | |
654 | * 1=after each channel completes all xfers | |
655 | * 02..00 PR<2..0>, priority 100=round robin | |
656 | * | |
657 | * 00000100 = 0x00 | |
658 | */ | |
659 | static unsigned char dma_priority = 0x04; | |
660 | ||
661 | // Number of bytes that can be written to shared RAM | |
662 | // in a single write operation | |
663 | static u32 sca_pci_load_interval = 64; | |
664 | ||
665 | /* | |
666 | * 1st function defined in .text section. Calling this function in | |
667 | * init_module() followed by a breakpoint allows a remote debugger | |
668 | * (gdb) to get the .text address for the add-symbol-file command. | |
669 | * This allows remote debugging of dynamically loadable modules. | |
670 | */ | |
671 | static void* synclinkmp_get_text_ptr(void); | |
672 | static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;} | |
673 | ||
674 | static inline int sanity_check(SLMP_INFO *info, | |
675 | char *name, const char *routine) | |
676 | { | |
677 | #ifdef SANITY_CHECK | |
678 | static const char *badmagic = | |
679 | "Warning: bad magic number for synclinkmp_struct (%s) in %s\n"; | |
680 | static const char *badinfo = | |
681 | "Warning: null synclinkmp_struct for (%s) in %s\n"; | |
682 | ||
683 | if (!info) { | |
684 | printk(badinfo, name, routine); | |
685 | return 1; | |
686 | } | |
687 | if (info->magic != MGSL_MAGIC) { | |
688 | printk(badmagic, name, routine); | |
689 | return 1; | |
690 | } | |
691 | #else | |
692 | if (!info) | |
693 | return 1; | |
694 | #endif | |
695 | return 0; | |
696 | } | |
697 | ||
698 | /** | |
699 | * line discipline callback wrappers | |
700 | * | |
701 | * The wrappers maintain line discipline references | |
702 | * while calling into the line discipline. | |
703 | * | |
704 | * ldisc_receive_buf - pass receive data to line discipline | |
705 | */ | |
706 | ||
707 | static void ldisc_receive_buf(struct tty_struct *tty, | |
708 | const __u8 *data, char *flags, int count) | |
709 | { | |
710 | struct tty_ldisc *ld; | |
711 | if (!tty) | |
712 | return; | |
713 | ld = tty_ldisc_ref(tty); | |
714 | if (ld) { | |
715 | if (ld->receive_buf) | |
716 | ld->receive_buf(tty, data, flags, count); | |
717 | tty_ldisc_deref(ld); | |
718 | } | |
719 | } | |
720 | ||
721 | /* tty callbacks */ | |
722 | ||
723 | /* Called when a port is opened. Init and enable port. | |
724 | */ | |
725 | static int open(struct tty_struct *tty, struct file *filp) | |
726 | { | |
727 | SLMP_INFO *info; | |
728 | int retval, line; | |
729 | unsigned long flags; | |
730 | ||
731 | line = tty->index; | |
732 | if ((line < 0) || (line >= synclinkmp_device_count)) { | |
733 | printk("%s(%d): open with invalid line #%d.\n", | |
734 | __FILE__,__LINE__,line); | |
735 | return -ENODEV; | |
736 | } | |
737 | ||
738 | info = synclinkmp_device_list; | |
739 | while(info && info->line != line) | |
740 | info = info->next_device; | |
741 | if (sanity_check(info, tty->name, "open")) | |
742 | return -ENODEV; | |
743 | if ( info->init_error ) { | |
744 | printk("%s(%d):%s device is not allocated, init error=%d\n", | |
745 | __FILE__,__LINE__,info->device_name,info->init_error); | |
746 | return -ENODEV; | |
747 | } | |
748 | ||
749 | tty->driver_data = info; | |
750 | info->tty = tty; | |
751 | ||
752 | if (debug_level >= DEBUG_LEVEL_INFO) | |
753 | printk("%s(%d):%s open(), old ref count = %d\n", | |
754 | __FILE__,__LINE__,tty->driver->name, info->count); | |
755 | ||
756 | /* If port is closing, signal caller to try again */ | |
757 | if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){ | |
758 | if (info->flags & ASYNC_CLOSING) | |
759 | interruptible_sleep_on(&info->close_wait); | |
760 | retval = ((info->flags & ASYNC_HUP_NOTIFY) ? | |
761 | -EAGAIN : -ERESTARTSYS); | |
762 | goto cleanup; | |
763 | } | |
764 | ||
765 | info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; | |
766 | ||
767 | spin_lock_irqsave(&info->netlock, flags); | |
768 | if (info->netcount) { | |
769 | retval = -EBUSY; | |
770 | spin_unlock_irqrestore(&info->netlock, flags); | |
771 | goto cleanup; | |
772 | } | |
773 | info->count++; | |
774 | spin_unlock_irqrestore(&info->netlock, flags); | |
775 | ||
776 | if (info->count == 1) { | |
777 | /* 1st open on this device, init hardware */ | |
778 | retval = startup(info); | |
779 | if (retval < 0) | |
780 | goto cleanup; | |
781 | } | |
782 | ||
783 | retval = block_til_ready(tty, filp, info); | |
784 | if (retval) { | |
785 | if (debug_level >= DEBUG_LEVEL_INFO) | |
786 | printk("%s(%d):%s block_til_ready() returned %d\n", | |
787 | __FILE__,__LINE__, info->device_name, retval); | |
788 | goto cleanup; | |
789 | } | |
790 | ||
791 | if (debug_level >= DEBUG_LEVEL_INFO) | |
792 | printk("%s(%d):%s open() success\n", | |
793 | __FILE__,__LINE__, info->device_name); | |
794 | retval = 0; | |
795 | ||
796 | cleanup: | |
797 | if (retval) { | |
798 | if (tty->count == 1) | |
799 | info->tty = NULL; /* tty layer will release tty struct */ | |
800 | if(info->count) | |
801 | info->count--; | |
802 | } | |
803 | ||
804 | return retval; | |
805 | } | |
806 | ||
807 | /* Called when port is closed. Wait for remaining data to be | |
808 | * sent. Disable port and free resources. | |
809 | */ | |
810 | static void close(struct tty_struct *tty, struct file *filp) | |
811 | { | |
812 | SLMP_INFO * info = (SLMP_INFO *)tty->driver_data; | |
813 | ||
814 | if (sanity_check(info, tty->name, "close")) | |
815 | return; | |
816 | ||
817 | if (debug_level >= DEBUG_LEVEL_INFO) | |
818 | printk("%s(%d):%s close() entry, count=%d\n", | |
819 | __FILE__,__LINE__, info->device_name, info->count); | |
820 | ||
821 | if (!info->count) | |
822 | return; | |
823 | ||
824 | if (tty_hung_up_p(filp)) | |
825 | goto cleanup; | |
826 | ||
827 | if ((tty->count == 1) && (info->count != 1)) { | |
828 | /* | |
829 | * tty->count is 1 and the tty structure will be freed. | |
830 | * info->count should be one in this case. | |
831 | * if it's not, correct it so that the port is shutdown. | |
832 | */ | |
833 | printk("%s(%d):%s close: bad refcount; tty->count is 1, " | |
834 | "info->count is %d\n", | |
835 | __FILE__,__LINE__, info->device_name, info->count); | |
836 | info->count = 1; | |
837 | } | |
838 | ||
839 | info->count--; | |
840 | ||
841 | /* if at least one open remaining, leave hardware active */ | |
842 | if (info->count) | |
843 | goto cleanup; | |
844 | ||
845 | info->flags |= ASYNC_CLOSING; | |
846 | ||
847 | /* set tty->closing to notify line discipline to | |
848 | * only process XON/XOFF characters. Only the N_TTY | |
849 | * discipline appears to use this (ppp does not). | |
850 | */ | |
851 | tty->closing = 1; | |
852 | ||
853 | /* wait for transmit data to clear all layers */ | |
854 | ||
855 | if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) { | |
856 | if (debug_level >= DEBUG_LEVEL_INFO) | |
857 | printk("%s(%d):%s close() calling tty_wait_until_sent\n", | |
858 | __FILE__,__LINE__, info->device_name ); | |
859 | tty_wait_until_sent(tty, info->closing_wait); | |
860 | } | |
861 | ||
862 | if (info->flags & ASYNC_INITIALIZED) | |
863 | wait_until_sent(tty, info->timeout); | |
864 | ||
865 | if (tty->driver->flush_buffer) | |
866 | tty->driver->flush_buffer(tty); | |
867 | ||
868 | tty_ldisc_flush(tty); | |
869 | ||
870 | shutdown(info); | |
871 | ||
872 | tty->closing = 0; | |
873 | info->tty = NULL; | |
874 | ||
875 | if (info->blocked_open) { | |
876 | if (info->close_delay) { | |
877 | msleep_interruptible(jiffies_to_msecs(info->close_delay)); | |
878 | } | |
879 | wake_up_interruptible(&info->open_wait); | |
880 | } | |
881 | ||
882 | info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); | |
883 | ||
884 | wake_up_interruptible(&info->close_wait); | |
885 | ||
886 | cleanup: | |
887 | if (debug_level >= DEBUG_LEVEL_INFO) | |
888 | printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__, | |
889 | tty->driver->name, info->count); | |
890 | } | |
891 | ||
892 | /* Called by tty_hangup() when a hangup is signaled. | |
893 | * This is the same as closing all open descriptors for the port. | |
894 | */ | |
895 | static void hangup(struct tty_struct *tty) | |
896 | { | |
897 | SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; | |
898 | ||
899 | if (debug_level >= DEBUG_LEVEL_INFO) | |
900 | printk("%s(%d):%s hangup()\n", | |
901 | __FILE__,__LINE__, info->device_name ); | |
902 | ||
903 | if (sanity_check(info, tty->name, "hangup")) | |
904 | return; | |
905 | ||
906 | flush_buffer(tty); | |
907 | shutdown(info); | |
908 | ||
909 | info->count = 0; | |
910 | info->flags &= ~ASYNC_NORMAL_ACTIVE; | |
911 | info->tty = NULL; | |
912 | ||
913 | wake_up_interruptible(&info->open_wait); | |
914 | } | |
915 | ||
916 | /* Set new termios settings | |
917 | */ | |
606d099c | 918 | static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) |
1da177e4 LT |
919 | { |
920 | SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; | |
921 | unsigned long flags; | |
922 | ||
923 | if (debug_level >= DEBUG_LEVEL_INFO) | |
924 | printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__, | |
925 | tty->driver->name ); | |
926 | ||
1da177e4 LT |
927 | change_params(info); |
928 | ||
929 | /* Handle transition to B0 status */ | |
930 | if (old_termios->c_cflag & CBAUD && | |
931 | !(tty->termios->c_cflag & CBAUD)) { | |
932 | info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); | |
933 | spin_lock_irqsave(&info->lock,flags); | |
934 | set_signals(info); | |
935 | spin_unlock_irqrestore(&info->lock,flags); | |
936 | } | |
937 | ||
938 | /* Handle transition away from B0 status */ | |
939 | if (!(old_termios->c_cflag & CBAUD) && | |
940 | tty->termios->c_cflag & CBAUD) { | |
941 | info->serial_signals |= SerialSignal_DTR; | |
942 | if (!(tty->termios->c_cflag & CRTSCTS) || | |
943 | !test_bit(TTY_THROTTLED, &tty->flags)) { | |
944 | info->serial_signals |= SerialSignal_RTS; | |
945 | } | |
946 | spin_lock_irqsave(&info->lock,flags); | |
947 | set_signals(info); | |
948 | spin_unlock_irqrestore(&info->lock,flags); | |
949 | } | |
950 | ||
951 | /* Handle turning off CRTSCTS */ | |
952 | if (old_termios->c_cflag & CRTSCTS && | |
953 | !(tty->termios->c_cflag & CRTSCTS)) { | |
954 | tty->hw_stopped = 0; | |
955 | tx_release(tty); | |
956 | } | |
957 | } | |
958 | ||
959 | /* Send a block of data | |
960 | * | |
961 | * Arguments: | |
962 | * | |
963 | * tty pointer to tty information structure | |
964 | * buf pointer to buffer containing send data | |
965 | * count size of send data in bytes | |
966 | * | |
967 | * Return Value: number of characters written | |
968 | */ | |
969 | static int write(struct tty_struct *tty, | |
970 | const unsigned char *buf, int count) | |
971 | { | |
972 | int c, ret = 0; | |
973 | SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; | |
974 | unsigned long flags; | |
975 | ||
976 | if (debug_level >= DEBUG_LEVEL_INFO) | |
977 | printk("%s(%d):%s write() count=%d\n", | |
978 | __FILE__,__LINE__,info->device_name,count); | |
979 | ||
980 | if (sanity_check(info, tty->name, "write")) | |
981 | goto cleanup; | |
982 | ||
326f28e9 | 983 | if (!info->tx_buf) |
1da177e4 LT |
984 | goto cleanup; |
985 | ||
986 | if (info->params.mode == MGSL_MODE_HDLC) { | |
987 | if (count > info->max_frame_size) { | |
988 | ret = -EIO; | |
989 | goto cleanup; | |
990 | } | |
991 | if (info->tx_active) | |
992 | goto cleanup; | |
993 | if (info->tx_count) { | |
994 | /* send accumulated data from send_char() calls */ | |
995 | /* as frame and wait before accepting more data. */ | |
996 | tx_load_dma_buffer(info, info->tx_buf, info->tx_count); | |
997 | goto start; | |
998 | } | |
999 | ret = info->tx_count = count; | |
1000 | tx_load_dma_buffer(info, buf, count); | |
1001 | goto start; | |
1002 | } | |
1003 | ||
1004 | for (;;) { | |
1005 | c = min_t(int, count, | |
1006 | min(info->max_frame_size - info->tx_count - 1, | |
1007 | info->max_frame_size - info->tx_put)); | |
1008 | if (c <= 0) | |
1009 | break; | |
1010 | ||
1011 | memcpy(info->tx_buf + info->tx_put, buf, c); | |
1012 | ||
1013 | spin_lock_irqsave(&info->lock,flags); | |
1014 | info->tx_put += c; | |
1015 | if (info->tx_put >= info->max_frame_size) | |
1016 | info->tx_put -= info->max_frame_size; | |
1017 | info->tx_count += c; | |
1018 | spin_unlock_irqrestore(&info->lock,flags); | |
1019 | ||
1020 | buf += c; | |
1021 | count -= c; | |
1022 | ret += c; | |
1023 | } | |
1024 | ||
1025 | if (info->params.mode == MGSL_MODE_HDLC) { | |
1026 | if (count) { | |
1027 | ret = info->tx_count = 0; | |
1028 | goto cleanup; | |
1029 | } | |
1030 | tx_load_dma_buffer(info, info->tx_buf, info->tx_count); | |
1031 | } | |
1032 | start: | |
1033 | if (info->tx_count && !tty->stopped && !tty->hw_stopped) { | |
1034 | spin_lock_irqsave(&info->lock,flags); | |
1035 | if (!info->tx_active) | |
1036 | tx_start(info); | |
1037 | spin_unlock_irqrestore(&info->lock,flags); | |
1038 | } | |
1039 | ||
1040 | cleanup: | |
1041 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1042 | printk( "%s(%d):%s write() returning=%d\n", | |
1043 | __FILE__,__LINE__,info->device_name,ret); | |
1044 | return ret; | |
1045 | } | |
1046 | ||
1047 | /* Add a character to the transmit buffer. | |
1048 | */ | |
1049 | static void put_char(struct tty_struct *tty, unsigned char ch) | |
1050 | { | |
1051 | SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; | |
1052 | unsigned long flags; | |
1053 | ||
1054 | if ( debug_level >= DEBUG_LEVEL_INFO ) { | |
1055 | printk( "%s(%d):%s put_char(%d)\n", | |
1056 | __FILE__,__LINE__,info->device_name,ch); | |
1057 | } | |
1058 | ||
1059 | if (sanity_check(info, tty->name, "put_char")) | |
1060 | return; | |
1061 | ||
326f28e9 | 1062 | if (!info->tx_buf) |
1da177e4 LT |
1063 | return; |
1064 | ||
1065 | spin_lock_irqsave(&info->lock,flags); | |
1066 | ||
1067 | if ( (info->params.mode != MGSL_MODE_HDLC) || | |
1068 | !info->tx_active ) { | |
1069 | ||
1070 | if (info->tx_count < info->max_frame_size - 1) { | |
1071 | info->tx_buf[info->tx_put++] = ch; | |
1072 | if (info->tx_put >= info->max_frame_size) | |
1073 | info->tx_put -= info->max_frame_size; | |
1074 | info->tx_count++; | |
1075 | } | |
1076 | } | |
1077 | ||
1078 | spin_unlock_irqrestore(&info->lock,flags); | |
1079 | } | |
1080 | ||
1081 | /* Send a high-priority XON/XOFF character | |
1082 | */ | |
1083 | static void send_xchar(struct tty_struct *tty, char ch) | |
1084 | { | |
1085 | SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; | |
1086 | unsigned long flags; | |
1087 | ||
1088 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1089 | printk("%s(%d):%s send_xchar(%d)\n", | |
1090 | __FILE__,__LINE__, info->device_name, ch ); | |
1091 | ||
1092 | if (sanity_check(info, tty->name, "send_xchar")) | |
1093 | return; | |
1094 | ||
1095 | info->x_char = ch; | |
1096 | if (ch) { | |
1097 | /* Make sure transmit interrupts are on */ | |
1098 | spin_lock_irqsave(&info->lock,flags); | |
1099 | if (!info->tx_enabled) | |
1100 | tx_start(info); | |
1101 | spin_unlock_irqrestore(&info->lock,flags); | |
1102 | } | |
1103 | } | |
1104 | ||
1105 | /* Wait until the transmitter is empty. | |
1106 | */ | |
1107 | static void wait_until_sent(struct tty_struct *tty, int timeout) | |
1108 | { | |
1109 | SLMP_INFO * info = (SLMP_INFO *)tty->driver_data; | |
1110 | unsigned long orig_jiffies, char_time; | |
1111 | ||
1112 | if (!info ) | |
1113 | return; | |
1114 | ||
1115 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1116 | printk("%s(%d):%s wait_until_sent() entry\n", | |
1117 | __FILE__,__LINE__, info->device_name ); | |
1118 | ||
1119 | if (sanity_check(info, tty->name, "wait_until_sent")) | |
1120 | return; | |
1121 | ||
1122 | if (!(info->flags & ASYNC_INITIALIZED)) | |
1123 | goto exit; | |
1124 | ||
1125 | orig_jiffies = jiffies; | |
1126 | ||
1127 | /* Set check interval to 1/5 of estimated time to | |
1128 | * send a character, and make it at least 1. The check | |
1129 | * interval should also be less than the timeout. | |
1130 | * Note: use tight timings here to satisfy the NIST-PCTS. | |
1131 | */ | |
1132 | ||
1133 | if ( info->params.data_rate ) { | |
1134 | char_time = info->timeout/(32 * 5); | |
1135 | if (!char_time) | |
1136 | char_time++; | |
1137 | } else | |
1138 | char_time = 1; | |
1139 | ||
1140 | if (timeout) | |
1141 | char_time = min_t(unsigned long, char_time, timeout); | |
1142 | ||
1143 | if ( info->params.mode == MGSL_MODE_HDLC ) { | |
1144 | while (info->tx_active) { | |
1145 | msleep_interruptible(jiffies_to_msecs(char_time)); | |
1146 | if (signal_pending(current)) | |
1147 | break; | |
1148 | if (timeout && time_after(jiffies, orig_jiffies + timeout)) | |
1149 | break; | |
1150 | } | |
1151 | } else { | |
1152 | //TODO: determine if there is something similar to USC16C32 | |
1153 | // TXSTATUS_ALL_SENT status | |
1154 | while ( info->tx_active && info->tx_enabled) { | |
1155 | msleep_interruptible(jiffies_to_msecs(char_time)); | |
1156 | if (signal_pending(current)) | |
1157 | break; | |
1158 | if (timeout && time_after(jiffies, orig_jiffies + timeout)) | |
1159 | break; | |
1160 | } | |
1161 | } | |
1162 | ||
1163 | exit: | |
1164 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1165 | printk("%s(%d):%s wait_until_sent() exit\n", | |
1166 | __FILE__,__LINE__, info->device_name ); | |
1167 | } | |
1168 | ||
1169 | /* Return the count of free bytes in transmit buffer | |
1170 | */ | |
1171 | static int write_room(struct tty_struct *tty) | |
1172 | { | |
1173 | SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; | |
1174 | int ret; | |
1175 | ||
1176 | if (sanity_check(info, tty->name, "write_room")) | |
1177 | return 0; | |
1178 | ||
1179 | if (info->params.mode == MGSL_MODE_HDLC) { | |
1180 | ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE; | |
1181 | } else { | |
1182 | ret = info->max_frame_size - info->tx_count - 1; | |
1183 | if (ret < 0) | |
1184 | ret = 0; | |
1185 | } | |
1186 | ||
1187 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1188 | printk("%s(%d):%s write_room()=%d\n", | |
1189 | __FILE__, __LINE__, info->device_name, ret); | |
1190 | ||
1191 | return ret; | |
1192 | } | |
1193 | ||
1194 | /* enable transmitter and send remaining buffered characters | |
1195 | */ | |
1196 | static void flush_chars(struct tty_struct *tty) | |
1197 | { | |
1198 | SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; | |
1199 | unsigned long flags; | |
1200 | ||
1201 | if ( debug_level >= DEBUG_LEVEL_INFO ) | |
1202 | printk( "%s(%d):%s flush_chars() entry tx_count=%d\n", | |
1203 | __FILE__,__LINE__,info->device_name,info->tx_count); | |
1204 | ||
1205 | if (sanity_check(info, tty->name, "flush_chars")) | |
1206 | return; | |
1207 | ||
1208 | if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped || | |
1209 | !info->tx_buf) | |
1210 | return; | |
1211 | ||
1212 | if ( debug_level >= DEBUG_LEVEL_INFO ) | |
1213 | printk( "%s(%d):%s flush_chars() entry, starting transmitter\n", | |
1214 | __FILE__,__LINE__,info->device_name ); | |
1215 | ||
1216 | spin_lock_irqsave(&info->lock,flags); | |
1217 | ||
1218 | if (!info->tx_active) { | |
1219 | if ( (info->params.mode == MGSL_MODE_HDLC) && | |
1220 | info->tx_count ) { | |
1221 | /* operating in synchronous (frame oriented) mode */ | |
1222 | /* copy data from circular tx_buf to */ | |
1223 | /* transmit DMA buffer. */ | |
1224 | tx_load_dma_buffer(info, | |
1225 | info->tx_buf,info->tx_count); | |
1226 | } | |
1227 | tx_start(info); | |
1228 | } | |
1229 | ||
1230 | spin_unlock_irqrestore(&info->lock,flags); | |
1231 | } | |
1232 | ||
1233 | /* Discard all data in the send buffer | |
1234 | */ | |
1235 | static void flush_buffer(struct tty_struct *tty) | |
1236 | { | |
1237 | SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; | |
1238 | unsigned long flags; | |
1239 | ||
1240 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1241 | printk("%s(%d):%s flush_buffer() entry\n", | |
1242 | __FILE__,__LINE__, info->device_name ); | |
1243 | ||
1244 | if (sanity_check(info, tty->name, "flush_buffer")) | |
1245 | return; | |
1246 | ||
1247 | spin_lock_irqsave(&info->lock,flags); | |
1248 | info->tx_count = info->tx_put = info->tx_get = 0; | |
1249 | del_timer(&info->tx_timer); | |
1250 | spin_unlock_irqrestore(&info->lock,flags); | |
1251 | ||
1da177e4 LT |
1252 | tty_wakeup(tty); |
1253 | } | |
1254 | ||
1255 | /* throttle (stop) transmitter | |
1256 | */ | |
1257 | static void tx_hold(struct tty_struct *tty) | |
1258 | { | |
1259 | SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; | |
1260 | unsigned long flags; | |
1261 | ||
1262 | if (sanity_check(info, tty->name, "tx_hold")) | |
1263 | return; | |
1264 | ||
1265 | if ( debug_level >= DEBUG_LEVEL_INFO ) | |
1266 | printk("%s(%d):%s tx_hold()\n", | |
1267 | __FILE__,__LINE__,info->device_name); | |
1268 | ||
1269 | spin_lock_irqsave(&info->lock,flags); | |
1270 | if (info->tx_enabled) | |
1271 | tx_stop(info); | |
1272 | spin_unlock_irqrestore(&info->lock,flags); | |
1273 | } | |
1274 | ||
1275 | /* release (start) transmitter | |
1276 | */ | |
1277 | static void tx_release(struct tty_struct *tty) | |
1278 | { | |
1279 | SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; | |
1280 | unsigned long flags; | |
1281 | ||
1282 | if (sanity_check(info, tty->name, "tx_release")) | |
1283 | return; | |
1284 | ||
1285 | if ( debug_level >= DEBUG_LEVEL_INFO ) | |
1286 | printk("%s(%d):%s tx_release()\n", | |
1287 | __FILE__,__LINE__,info->device_name); | |
1288 | ||
1289 | spin_lock_irqsave(&info->lock,flags); | |
1290 | if (!info->tx_enabled) | |
1291 | tx_start(info); | |
1292 | spin_unlock_irqrestore(&info->lock,flags); | |
1293 | } | |
1294 | ||
1295 | /* Service an IOCTL request | |
1296 | * | |
1297 | * Arguments: | |
1298 | * | |
1299 | * tty pointer to tty instance data | |
1300 | * file pointer to associated file object for device | |
1301 | * cmd IOCTL command code | |
1302 | * arg command argument/context | |
1303 | * | |
1304 | * Return Value: 0 if success, otherwise error code | |
1305 | */ | |
1f8cabb7 | 1306 | static int do_ioctl(struct tty_struct *tty, struct file *file, |
1da177e4 LT |
1307 | unsigned int cmd, unsigned long arg) |
1308 | { | |
1309 | SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; | |
1310 | int error; | |
1311 | struct mgsl_icount cnow; /* kernel counter temps */ | |
1312 | struct serial_icounter_struct __user *p_cuser; /* user space */ | |
1313 | unsigned long flags; | |
1314 | void __user *argp = (void __user *)arg; | |
1315 | ||
1316 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1317 | printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__, | |
1318 | info->device_name, cmd ); | |
1319 | ||
1320 | if (sanity_check(info, tty->name, "ioctl")) | |
1321 | return -ENODEV; | |
1322 | ||
1323 | if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && | |
1324 | (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { | |
1325 | if (tty->flags & (1 << TTY_IO_ERROR)) | |
1326 | return -EIO; | |
1327 | } | |
1328 | ||
1329 | switch (cmd) { | |
1330 | case MGSL_IOCGPARAMS: | |
1331 | return get_params(info, argp); | |
1332 | case MGSL_IOCSPARAMS: | |
1333 | return set_params(info, argp); | |
1334 | case MGSL_IOCGTXIDLE: | |
1335 | return get_txidle(info, argp); | |
1336 | case MGSL_IOCSTXIDLE: | |
1337 | return set_txidle(info, (int)arg); | |
1338 | case MGSL_IOCTXENABLE: | |
1339 | return tx_enable(info, (int)arg); | |
1340 | case MGSL_IOCRXENABLE: | |
1341 | return rx_enable(info, (int)arg); | |
1342 | case MGSL_IOCTXABORT: | |
1343 | return tx_abort(info); | |
1344 | case MGSL_IOCGSTATS: | |
1345 | return get_stats(info, argp); | |
1346 | case MGSL_IOCWAITEVENT: | |
1347 | return wait_mgsl_event(info, argp); | |
1348 | case MGSL_IOCLOOPTXDONE: | |
1349 | return 0; // TODO: Not supported, need to document | |
1350 | /* Wait for modem input (DCD,RI,DSR,CTS) change | |
1351 | * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS) | |
1352 | */ | |
1353 | case TIOCMIWAIT: | |
1354 | return modem_input_wait(info,(int)arg); | |
1355 | ||
1356 | /* | |
1357 | * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) | |
1358 | * Return: write counters to the user passed counter struct | |
1359 | * NB: both 1->0 and 0->1 transitions are counted except for | |
1360 | * RI where only 0->1 is counted. | |
1361 | */ | |
1362 | case TIOCGICOUNT: | |
1363 | spin_lock_irqsave(&info->lock,flags); | |
1364 | cnow = info->icount; | |
1365 | spin_unlock_irqrestore(&info->lock,flags); | |
1366 | p_cuser = argp; | |
1367 | PUT_USER(error,cnow.cts, &p_cuser->cts); | |
1368 | if (error) return error; | |
1369 | PUT_USER(error,cnow.dsr, &p_cuser->dsr); | |
1370 | if (error) return error; | |
1371 | PUT_USER(error,cnow.rng, &p_cuser->rng); | |
1372 | if (error) return error; | |
1373 | PUT_USER(error,cnow.dcd, &p_cuser->dcd); | |
1374 | if (error) return error; | |
1375 | PUT_USER(error,cnow.rx, &p_cuser->rx); | |
1376 | if (error) return error; | |
1377 | PUT_USER(error,cnow.tx, &p_cuser->tx); | |
1378 | if (error) return error; | |
1379 | PUT_USER(error,cnow.frame, &p_cuser->frame); | |
1380 | if (error) return error; | |
1381 | PUT_USER(error,cnow.overrun, &p_cuser->overrun); | |
1382 | if (error) return error; | |
1383 | PUT_USER(error,cnow.parity, &p_cuser->parity); | |
1384 | if (error) return error; | |
1385 | PUT_USER(error,cnow.brk, &p_cuser->brk); | |
1386 | if (error) return error; | |
1387 | PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun); | |
1388 | if (error) return error; | |
1389 | return 0; | |
1390 | default: | |
1391 | return -ENOIOCTLCMD; | |
1392 | } | |
1393 | return 0; | |
1394 | } | |
1395 | ||
1f8cabb7 AC |
1396 | static int ioctl(struct tty_struct *tty, struct file *file, |
1397 | unsigned int cmd, unsigned long arg) | |
1398 | { | |
1399 | int ret; | |
1400 | lock_kernel(); | |
1401 | ret = do_ioctl(tty, file, cmd, arg); | |
1402 | unlock_kernel(); | |
1403 | return ret; | |
1404 | } | |
1405 | ||
1da177e4 LT |
1406 | /* |
1407 | * /proc fs routines.... | |
1408 | */ | |
1409 | ||
1410 | static inline int line_info(char *buf, SLMP_INFO *info) | |
1411 | { | |
1412 | char stat_buf[30]; | |
1413 | int ret; | |
1414 | unsigned long flags; | |
1415 | ||
1416 | ret = sprintf(buf, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n" | |
1417 | "\tIRQ=%d MaxFrameSize=%u\n", | |
1418 | info->device_name, | |
1419 | info->phys_sca_base, | |
1420 | info->phys_memory_base, | |
1421 | info->phys_statctrl_base, | |
1422 | info->phys_lcr_base, | |
1423 | info->irq_level, | |
1424 | info->max_frame_size ); | |
1425 | ||
1426 | /* output current serial signal states */ | |
1427 | spin_lock_irqsave(&info->lock,flags); | |
1428 | get_signals(info); | |
1429 | spin_unlock_irqrestore(&info->lock,flags); | |
1430 | ||
1431 | stat_buf[0] = 0; | |
1432 | stat_buf[1] = 0; | |
1433 | if (info->serial_signals & SerialSignal_RTS) | |
1434 | strcat(stat_buf, "|RTS"); | |
1435 | if (info->serial_signals & SerialSignal_CTS) | |
1436 | strcat(stat_buf, "|CTS"); | |
1437 | if (info->serial_signals & SerialSignal_DTR) | |
1438 | strcat(stat_buf, "|DTR"); | |
1439 | if (info->serial_signals & SerialSignal_DSR) | |
1440 | strcat(stat_buf, "|DSR"); | |
1441 | if (info->serial_signals & SerialSignal_DCD) | |
1442 | strcat(stat_buf, "|CD"); | |
1443 | if (info->serial_signals & SerialSignal_RI) | |
1444 | strcat(stat_buf, "|RI"); | |
1445 | ||
1446 | if (info->params.mode == MGSL_MODE_HDLC) { | |
1447 | ret += sprintf(buf+ret, "\tHDLC txok:%d rxok:%d", | |
1448 | info->icount.txok, info->icount.rxok); | |
1449 | if (info->icount.txunder) | |
1450 | ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder); | |
1451 | if (info->icount.txabort) | |
1452 | ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort); | |
1453 | if (info->icount.rxshort) | |
1454 | ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort); | |
1455 | if (info->icount.rxlong) | |
1456 | ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong); | |
1457 | if (info->icount.rxover) | |
1458 | ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover); | |
1459 | if (info->icount.rxcrc) | |
1460 | ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxcrc); | |
1461 | } else { | |
1462 | ret += sprintf(buf+ret, "\tASYNC tx:%d rx:%d", | |
1463 | info->icount.tx, info->icount.rx); | |
1464 | if (info->icount.frame) | |
1465 | ret += sprintf(buf+ret, " fe:%d", info->icount.frame); | |
1466 | if (info->icount.parity) | |
1467 | ret += sprintf(buf+ret, " pe:%d", info->icount.parity); | |
1468 | if (info->icount.brk) | |
1469 | ret += sprintf(buf+ret, " brk:%d", info->icount.brk); | |
1470 | if (info->icount.overrun) | |
1471 | ret += sprintf(buf+ret, " oe:%d", info->icount.overrun); | |
1472 | } | |
1473 | ||
1474 | /* Append serial signal status to end */ | |
1475 | ret += sprintf(buf+ret, " %s\n", stat_buf+1); | |
1476 | ||
1477 | ret += sprintf(buf+ret, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", | |
1478 | info->tx_active,info->bh_requested,info->bh_running, | |
1479 | info->pending_bh); | |
1480 | ||
1481 | return ret; | |
1482 | } | |
1483 | ||
1484 | /* Called to print information about devices | |
1485 | */ | |
ce9f9f73 | 1486 | static int read_proc(char *page, char **start, off_t off, int count, |
1da177e4 LT |
1487 | int *eof, void *data) |
1488 | { | |
1489 | int len = 0, l; | |
1490 | off_t begin = 0; | |
1491 | SLMP_INFO *info; | |
1492 | ||
1493 | len += sprintf(page, "synclinkmp driver:%s\n", driver_version); | |
1494 | ||
1495 | info = synclinkmp_device_list; | |
1496 | while( info ) { | |
1497 | l = line_info(page + len, info); | |
1498 | len += l; | |
1499 | if (len+begin > off+count) | |
1500 | goto done; | |
1501 | if (len+begin < off) { | |
1502 | begin += len; | |
1503 | len = 0; | |
1504 | } | |
1505 | info = info->next_device; | |
1506 | } | |
1507 | ||
1508 | *eof = 1; | |
1509 | done: | |
1510 | if (off >= len+begin) | |
1511 | return 0; | |
1512 | *start = page + (off-begin); | |
1513 | return ((count < begin+len-off) ? count : begin+len-off); | |
1514 | } | |
1515 | ||
1516 | /* Return the count of bytes in transmit buffer | |
1517 | */ | |
1518 | static int chars_in_buffer(struct tty_struct *tty) | |
1519 | { | |
1520 | SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; | |
1521 | ||
1522 | if (sanity_check(info, tty->name, "chars_in_buffer")) | |
1523 | return 0; | |
1524 | ||
1525 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1526 | printk("%s(%d):%s chars_in_buffer()=%d\n", | |
1527 | __FILE__, __LINE__, info->device_name, info->tx_count); | |
1528 | ||
1529 | return info->tx_count; | |
1530 | } | |
1531 | ||
1532 | /* Signal remote device to throttle send data (our receive data) | |
1533 | */ | |
1534 | static void throttle(struct tty_struct * tty) | |
1535 | { | |
1536 | SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; | |
1537 | unsigned long flags; | |
1538 | ||
1539 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1540 | printk("%s(%d):%s throttle() entry\n", | |
1541 | __FILE__,__LINE__, info->device_name ); | |
1542 | ||
1543 | if (sanity_check(info, tty->name, "throttle")) | |
1544 | return; | |
1545 | ||
1546 | if (I_IXOFF(tty)) | |
1547 | send_xchar(tty, STOP_CHAR(tty)); | |
1548 | ||
1549 | if (tty->termios->c_cflag & CRTSCTS) { | |
1550 | spin_lock_irqsave(&info->lock,flags); | |
1551 | info->serial_signals &= ~SerialSignal_RTS; | |
1552 | set_signals(info); | |
1553 | spin_unlock_irqrestore(&info->lock,flags); | |
1554 | } | |
1555 | } | |
1556 | ||
1557 | /* Signal remote device to stop throttling send data (our receive data) | |
1558 | */ | |
1559 | static void unthrottle(struct tty_struct * tty) | |
1560 | { | |
1561 | SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; | |
1562 | unsigned long flags; | |
1563 | ||
1564 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1565 | printk("%s(%d):%s unthrottle() entry\n", | |
1566 | __FILE__,__LINE__, info->device_name ); | |
1567 | ||
1568 | if (sanity_check(info, tty->name, "unthrottle")) | |
1569 | return; | |
1570 | ||
1571 | if (I_IXOFF(tty)) { | |
1572 | if (info->x_char) | |
1573 | info->x_char = 0; | |
1574 | else | |
1575 | send_xchar(tty, START_CHAR(tty)); | |
1576 | } | |
1577 | ||
1578 | if (tty->termios->c_cflag & CRTSCTS) { | |
1579 | spin_lock_irqsave(&info->lock,flags); | |
1580 | info->serial_signals |= SerialSignal_RTS; | |
1581 | set_signals(info); | |
1582 | spin_unlock_irqrestore(&info->lock,flags); | |
1583 | } | |
1584 | } | |
1585 | ||
1586 | /* set or clear transmit break condition | |
1587 | * break_state -1=set break condition, 0=clear | |
1588 | */ | |
1589 | static void set_break(struct tty_struct *tty, int break_state) | |
1590 | { | |
1591 | unsigned char RegValue; | |
1592 | SLMP_INFO * info = (SLMP_INFO *)tty->driver_data; | |
1593 | unsigned long flags; | |
1594 | ||
1595 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1596 | printk("%s(%d):%s set_break(%d)\n", | |
1597 | __FILE__,__LINE__, info->device_name, break_state); | |
1598 | ||
1599 | if (sanity_check(info, tty->name, "set_break")) | |
1600 | return; | |
1601 | ||
1602 | spin_lock_irqsave(&info->lock,flags); | |
1603 | RegValue = read_reg(info, CTL); | |
1604 | if (break_state == -1) | |
1605 | RegValue |= BIT3; | |
1606 | else | |
1607 | RegValue &= ~BIT3; | |
1608 | write_reg(info, CTL, RegValue); | |
1609 | spin_unlock_irqrestore(&info->lock,flags); | |
1610 | } | |
1611 | ||
af69c7f9 | 1612 | #if SYNCLINK_GENERIC_HDLC |
1da177e4 LT |
1613 | |
1614 | /** | |
1615 | * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) | |
1616 | * set encoding and frame check sequence (FCS) options | |
1617 | * | |
1618 | * dev pointer to network device structure | |
1619 | * encoding serial encoding setting | |
1620 | * parity FCS setting | |
1621 | * | |
1622 | * returns 0 if success, otherwise error code | |
1623 | */ | |
1624 | static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, | |
1625 | unsigned short parity) | |
1626 | { | |
1627 | SLMP_INFO *info = dev_to_port(dev); | |
1628 | unsigned char new_encoding; | |
1629 | unsigned short new_crctype; | |
1630 | ||
1631 | /* return error if TTY interface open */ | |
1632 | if (info->count) | |
1633 | return -EBUSY; | |
1634 | ||
1635 | switch (encoding) | |
1636 | { | |
1637 | case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; | |
1638 | case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; | |
1639 | case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; | |
1640 | case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; | |
1641 | case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; | |
1642 | default: return -EINVAL; | |
1643 | } | |
1644 | ||
1645 | switch (parity) | |
1646 | { | |
1647 | case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; | |
1648 | case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; | |
1649 | case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; | |
1650 | default: return -EINVAL; | |
1651 | } | |
1652 | ||
1653 | info->params.encoding = new_encoding; | |
53b3531b | 1654 | info->params.crc_type = new_crctype; |
1da177e4 LT |
1655 | |
1656 | /* if network interface up, reprogram hardware */ | |
1657 | if (info->netcount) | |
1658 | program_hw(info); | |
1659 | ||
1660 | return 0; | |
1661 | } | |
1662 | ||
1663 | /** | |
1664 | * called by generic HDLC layer to send frame | |
1665 | * | |
1666 | * skb socket buffer containing HDLC frame | |
1667 | * dev pointer to network device structure | |
1668 | * | |
1669 | * returns 0 if success, otherwise error code | |
1670 | */ | |
1671 | static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev) | |
1672 | { | |
1673 | SLMP_INFO *info = dev_to_port(dev); | |
1674 | struct net_device_stats *stats = hdlc_stats(dev); | |
1675 | unsigned long flags; | |
1676 | ||
1677 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1678 | printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name); | |
1679 | ||
1680 | /* stop sending until this frame completes */ | |
1681 | netif_stop_queue(dev); | |
1682 | ||
1683 | /* copy data to device buffers */ | |
1684 | info->tx_count = skb->len; | |
1685 | tx_load_dma_buffer(info, skb->data, skb->len); | |
1686 | ||
1687 | /* update network statistics */ | |
1688 | stats->tx_packets++; | |
1689 | stats->tx_bytes += skb->len; | |
1690 | ||
1691 | /* done with socket buffer, so free it */ | |
1692 | dev_kfree_skb(skb); | |
1693 | ||
1694 | /* save start time for transmit timeout detection */ | |
1695 | dev->trans_start = jiffies; | |
1696 | ||
1697 | /* start hardware transmitter if necessary */ | |
1698 | spin_lock_irqsave(&info->lock,flags); | |
1699 | if (!info->tx_active) | |
1700 | tx_start(info); | |
1701 | spin_unlock_irqrestore(&info->lock,flags); | |
1702 | ||
1703 | return 0; | |
1704 | } | |
1705 | ||
1706 | /** | |
1707 | * called by network layer when interface enabled | |
1708 | * claim resources and initialize hardware | |
1709 | * | |
1710 | * dev pointer to network device structure | |
1711 | * | |
1712 | * returns 0 if success, otherwise error code | |
1713 | */ | |
1714 | static int hdlcdev_open(struct net_device *dev) | |
1715 | { | |
1716 | SLMP_INFO *info = dev_to_port(dev); | |
1717 | int rc; | |
1718 | unsigned long flags; | |
1719 | ||
1720 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1721 | printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name); | |
1722 | ||
1723 | /* generic HDLC layer open processing */ | |
1724 | if ((rc = hdlc_open(dev))) | |
1725 | return rc; | |
1726 | ||
1727 | /* arbitrate between network and tty opens */ | |
1728 | spin_lock_irqsave(&info->netlock, flags); | |
1729 | if (info->count != 0 || info->netcount != 0) { | |
1730 | printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); | |
1731 | spin_unlock_irqrestore(&info->netlock, flags); | |
1732 | return -EBUSY; | |
1733 | } | |
1734 | info->netcount=1; | |
1735 | spin_unlock_irqrestore(&info->netlock, flags); | |
1736 | ||
1737 | /* claim resources and init adapter */ | |
1738 | if ((rc = startup(info)) != 0) { | |
1739 | spin_lock_irqsave(&info->netlock, flags); | |
1740 | info->netcount=0; | |
1741 | spin_unlock_irqrestore(&info->netlock, flags); | |
1742 | return rc; | |
1743 | } | |
1744 | ||
1745 | /* assert DTR and RTS, apply hardware settings */ | |
1746 | info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; | |
1747 | program_hw(info); | |
1748 | ||
1749 | /* enable network layer transmit */ | |
1750 | dev->trans_start = jiffies; | |
1751 | netif_start_queue(dev); | |
1752 | ||
1753 | /* inform generic HDLC layer of current DCD status */ | |
1754 | spin_lock_irqsave(&info->lock, flags); | |
1755 | get_signals(info); | |
1756 | spin_unlock_irqrestore(&info->lock, flags); | |
fbeff3c1 KH |
1757 | if (info->serial_signals & SerialSignal_DCD) |
1758 | netif_carrier_on(dev); | |
1759 | else | |
1760 | netif_carrier_off(dev); | |
1da177e4 LT |
1761 | return 0; |
1762 | } | |
1763 | ||
1764 | /** | |
1765 | * called by network layer when interface is disabled | |
1766 | * shutdown hardware and release resources | |
1767 | * | |
1768 | * dev pointer to network device structure | |
1769 | * | |
1770 | * returns 0 if success, otherwise error code | |
1771 | */ | |
1772 | static int hdlcdev_close(struct net_device *dev) | |
1773 | { | |
1774 | SLMP_INFO *info = dev_to_port(dev); | |
1775 | unsigned long flags; | |
1776 | ||
1777 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1778 | printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name); | |
1779 | ||
1780 | netif_stop_queue(dev); | |
1781 | ||
1782 | /* shutdown adapter and release resources */ | |
1783 | shutdown(info); | |
1784 | ||
1785 | hdlc_close(dev); | |
1786 | ||
1787 | spin_lock_irqsave(&info->netlock, flags); | |
1788 | info->netcount=0; | |
1789 | spin_unlock_irqrestore(&info->netlock, flags); | |
1790 | ||
1791 | return 0; | |
1792 | } | |
1793 | ||
1794 | /** | |
1795 | * called by network layer to process IOCTL call to network device | |
1796 | * | |
1797 | * dev pointer to network device structure | |
1798 | * ifr pointer to network interface request structure | |
1799 | * cmd IOCTL command code | |
1800 | * | |
1801 | * returns 0 if success, otherwise error code | |
1802 | */ | |
1803 | static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) | |
1804 | { | |
1805 | const size_t size = sizeof(sync_serial_settings); | |
1806 | sync_serial_settings new_line; | |
1807 | sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; | |
1808 | SLMP_INFO *info = dev_to_port(dev); | |
1809 | unsigned int flags; | |
1810 | ||
1811 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1812 | printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name); | |
1813 | ||
1814 | /* return error if TTY interface open */ | |
1815 | if (info->count) | |
1816 | return -EBUSY; | |
1817 | ||
1818 | if (cmd != SIOCWANDEV) | |
1819 | return hdlc_ioctl(dev, ifr, cmd); | |
1820 | ||
1821 | switch(ifr->ifr_settings.type) { | |
1822 | case IF_GET_IFACE: /* return current sync_serial_settings */ | |
1823 | ||
1824 | ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; | |
1825 | if (ifr->ifr_settings.size < size) { | |
1826 | ifr->ifr_settings.size = size; /* data size wanted */ | |
1827 | return -ENOBUFS; | |
1828 | } | |
1829 | ||
1830 | flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | | |
1831 | HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | | |
1832 | HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | | |
1833 | HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); | |
1834 | ||
1835 | switch (flags){ | |
1836 | case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; | |
1837 | case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; | |
1838 | case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; | |
1839 | case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; | |
1840 | default: new_line.clock_type = CLOCK_DEFAULT; | |
1841 | } | |
1842 | ||
1843 | new_line.clock_rate = info->params.clock_speed; | |
1844 | new_line.loopback = info->params.loopback ? 1:0; | |
1845 | ||
1846 | if (copy_to_user(line, &new_line, size)) | |
1847 | return -EFAULT; | |
1848 | return 0; | |
1849 | ||
1850 | case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ | |
1851 | ||
1852 | if(!capable(CAP_NET_ADMIN)) | |
1853 | return -EPERM; | |
1854 | if (copy_from_user(&new_line, line, size)) | |
1855 | return -EFAULT; | |
1856 | ||
1857 | switch (new_line.clock_type) | |
1858 | { | |
1859 | case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; | |
1860 | case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; | |
1861 | case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; | |
1862 | case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; | |
1863 | case CLOCK_DEFAULT: flags = info->params.flags & | |
1864 | (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | | |
1865 | HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | | |
1866 | HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | | |
1867 | HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; | |
1868 | default: return -EINVAL; | |
1869 | } | |
1870 | ||
1871 | if (new_line.loopback != 0 && new_line.loopback != 1) | |
1872 | return -EINVAL; | |
1873 | ||
1874 | info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | | |
1875 | HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | | |
1876 | HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | | |
1877 | HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); | |
1878 | info->params.flags |= flags; | |
1879 | ||
1880 | info->params.loopback = new_line.loopback; | |
1881 | ||
1882 | if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) | |
1883 | info->params.clock_speed = new_line.clock_rate; | |
1884 | else | |
1885 | info->params.clock_speed = 0; | |
1886 | ||
1887 | /* if network interface up, reprogram hardware */ | |
1888 | if (info->netcount) | |
1889 | program_hw(info); | |
1890 | return 0; | |
1891 | ||
1892 | default: | |
1893 | return hdlc_ioctl(dev, ifr, cmd); | |
1894 | } | |
1895 | } | |
1896 | ||
1897 | /** | |
1898 | * called by network layer when transmit timeout is detected | |
1899 | * | |
1900 | * dev pointer to network device structure | |
1901 | */ | |
1902 | static void hdlcdev_tx_timeout(struct net_device *dev) | |
1903 | { | |
1904 | SLMP_INFO *info = dev_to_port(dev); | |
1905 | struct net_device_stats *stats = hdlc_stats(dev); | |
1906 | unsigned long flags; | |
1907 | ||
1908 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1909 | printk("hdlcdev_tx_timeout(%s)\n",dev->name); | |
1910 | ||
1911 | stats->tx_errors++; | |
1912 | stats->tx_aborted_errors++; | |
1913 | ||
1914 | spin_lock_irqsave(&info->lock,flags); | |
1915 | tx_stop(info); | |
1916 | spin_unlock_irqrestore(&info->lock,flags); | |
1917 | ||
1918 | netif_wake_queue(dev); | |
1919 | } | |
1920 | ||
1921 | /** | |
1922 | * called by device driver when transmit completes | |
1923 | * reenable network layer transmit if stopped | |
1924 | * | |
1925 | * info pointer to device instance information | |
1926 | */ | |
1927 | static void hdlcdev_tx_done(SLMP_INFO *info) | |
1928 | { | |
1929 | if (netif_queue_stopped(info->netdev)) | |
1930 | netif_wake_queue(info->netdev); | |
1931 | } | |
1932 | ||
1933 | /** | |
1934 | * called by device driver when frame received | |
1935 | * pass frame to network layer | |
1936 | * | |
1937 | * info pointer to device instance information | |
1938 | * buf pointer to buffer contianing frame data | |
1939 | * size count of data bytes in buf | |
1940 | */ | |
1941 | static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size) | |
1942 | { | |
1943 | struct sk_buff *skb = dev_alloc_skb(size); | |
1944 | struct net_device *dev = info->netdev; | |
1945 | struct net_device_stats *stats = hdlc_stats(dev); | |
1946 | ||
1947 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1948 | printk("hdlcdev_rx(%s)\n",dev->name); | |
1949 | ||
1950 | if (skb == NULL) { | |
1951 | printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name); | |
1952 | stats->rx_dropped++; | |
1953 | return; | |
1954 | } | |
1955 | ||
1956 | memcpy(skb_put(skb, size),buf,size); | |
1957 | ||
1958 | skb->protocol = hdlc_type_trans(skb, info->netdev); | |
1959 | ||
1960 | stats->rx_packets++; | |
1961 | stats->rx_bytes += size; | |
1962 | ||
1963 | netif_rx(skb); | |
1964 | ||
1965 | info->netdev->last_rx = jiffies; | |
1966 | } | |
1967 | ||
1968 | /** | |
1969 | * called by device driver when adding device instance | |
1970 | * do generic HDLC initialization | |
1971 | * | |
1972 | * info pointer to device instance information | |
1973 | * | |
1974 | * returns 0 if success, otherwise error code | |
1975 | */ | |
1976 | static int hdlcdev_init(SLMP_INFO *info) | |
1977 | { | |
1978 | int rc; | |
1979 | struct net_device *dev; | |
1980 | hdlc_device *hdlc; | |
1981 | ||
1982 | /* allocate and initialize network and HDLC layer objects */ | |
1983 | ||
1984 | if (!(dev = alloc_hdlcdev(info))) { | |
1985 | printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__); | |
1986 | return -ENOMEM; | |
1987 | } | |
1988 | ||
1989 | /* for network layer reporting purposes only */ | |
1990 | dev->mem_start = info->phys_sca_base; | |
1991 | dev->mem_end = info->phys_sca_base + SCA_BASE_SIZE - 1; | |
1992 | dev->irq = info->irq_level; | |
1993 | ||
1994 | /* network layer callbacks and settings */ | |
1995 | dev->do_ioctl = hdlcdev_ioctl; | |
1996 | dev->open = hdlcdev_open; | |
1997 | dev->stop = hdlcdev_close; | |
1998 | dev->tx_timeout = hdlcdev_tx_timeout; | |
1999 | dev->watchdog_timeo = 10*HZ; | |
2000 | dev->tx_queue_len = 50; | |
2001 | ||
2002 | /* generic HDLC layer callbacks and settings */ | |
2003 | hdlc = dev_to_hdlc(dev); | |
2004 | hdlc->attach = hdlcdev_attach; | |
2005 | hdlc->xmit = hdlcdev_xmit; | |
2006 | ||
2007 | /* register objects with HDLC layer */ | |
2008 | if ((rc = register_hdlc_device(dev))) { | |
2009 | printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); | |
2010 | free_netdev(dev); | |
2011 | return rc; | |
2012 | } | |
2013 | ||
2014 | info->netdev = dev; | |
2015 | return 0; | |
2016 | } | |
2017 | ||
2018 | /** | |
2019 | * called by device driver when removing device instance | |
2020 | * do generic HDLC cleanup | |
2021 | * | |
2022 | * info pointer to device instance information | |
2023 | */ | |
2024 | static void hdlcdev_exit(SLMP_INFO *info) | |
2025 | { | |
2026 | unregister_hdlc_device(info->netdev); | |
2027 | free_netdev(info->netdev); | |
2028 | info->netdev = NULL; | |
2029 | } | |
2030 | ||
2031 | #endif /* CONFIG_HDLC */ | |
2032 | ||
2033 | ||
2034 | /* Return next bottom half action to perform. | |
2035 | * Return Value: BH action code or 0 if nothing to do. | |
2036 | */ | |
ce9f9f73 | 2037 | static int bh_action(SLMP_INFO *info) |
1da177e4 LT |
2038 | { |
2039 | unsigned long flags; | |
2040 | int rc = 0; | |
2041 | ||
2042 | spin_lock_irqsave(&info->lock,flags); | |
2043 | ||
2044 | if (info->pending_bh & BH_RECEIVE) { | |
2045 | info->pending_bh &= ~BH_RECEIVE; | |
2046 | rc = BH_RECEIVE; | |
2047 | } else if (info->pending_bh & BH_TRANSMIT) { | |
2048 | info->pending_bh &= ~BH_TRANSMIT; | |
2049 | rc = BH_TRANSMIT; | |
2050 | } else if (info->pending_bh & BH_STATUS) { | |
2051 | info->pending_bh &= ~BH_STATUS; | |
2052 | rc = BH_STATUS; | |
2053 | } | |
2054 | ||
2055 | if (!rc) { | |
2056 | /* Mark BH routine as complete */ | |
0fab6de0 JP |
2057 | info->bh_running = false; |
2058 | info->bh_requested = false; | |
1da177e4 LT |
2059 | } |
2060 | ||
2061 | spin_unlock_irqrestore(&info->lock,flags); | |
2062 | ||
2063 | return rc; | |
2064 | } | |
2065 | ||
2066 | /* Perform bottom half processing of work items queued by ISR. | |
2067 | */ | |
ce9f9f73 | 2068 | static void bh_handler(struct work_struct *work) |
1da177e4 | 2069 | { |
c4028958 | 2070 | SLMP_INFO *info = container_of(work, SLMP_INFO, task); |
1da177e4 LT |
2071 | int action; |
2072 | ||
2073 | if (!info) | |
2074 | return; | |
2075 | ||
2076 | if ( debug_level >= DEBUG_LEVEL_BH ) | |
2077 | printk( "%s(%d):%s bh_handler() entry\n", | |
2078 | __FILE__,__LINE__,info->device_name); | |
2079 | ||
0fab6de0 | 2080 | info->bh_running = true; |
1da177e4 LT |
2081 | |
2082 | while((action = bh_action(info)) != 0) { | |
2083 | ||
2084 | /* Process work item */ | |
2085 | if ( debug_level >= DEBUG_LEVEL_BH ) | |
2086 | printk( "%s(%d):%s bh_handler() work item action=%d\n", | |
2087 | __FILE__,__LINE__,info->device_name, action); | |
2088 | ||
2089 | switch (action) { | |
2090 | ||
2091 | case BH_RECEIVE: | |
2092 | bh_receive(info); | |
2093 | break; | |
2094 | case BH_TRANSMIT: | |
2095 | bh_transmit(info); | |
2096 | break; | |
2097 | case BH_STATUS: | |
2098 | bh_status(info); | |
2099 | break; | |
2100 | default: | |
2101 | /* unknown work item ID */ | |
2102 | printk("%s(%d):%s Unknown work item ID=%08X!\n", | |
2103 | __FILE__,__LINE__,info->device_name,action); | |
2104 | break; | |
2105 | } | |
2106 | } | |
2107 | ||
2108 | if ( debug_level >= DEBUG_LEVEL_BH ) | |
2109 | printk( "%s(%d):%s bh_handler() exit\n", | |
2110 | __FILE__,__LINE__,info->device_name); | |
2111 | } | |
2112 | ||
ce9f9f73 | 2113 | static void bh_receive(SLMP_INFO *info) |
1da177e4 LT |
2114 | { |
2115 | if ( debug_level >= DEBUG_LEVEL_BH ) | |
2116 | printk( "%s(%d):%s bh_receive()\n", | |
2117 | __FILE__,__LINE__,info->device_name); | |
2118 | ||
2119 | while( rx_get_frame(info) ); | |
2120 | } | |
2121 | ||
ce9f9f73 | 2122 | static void bh_transmit(SLMP_INFO *info) |
1da177e4 LT |
2123 | { |
2124 | struct tty_struct *tty = info->tty; | |
2125 | ||
2126 | if ( debug_level >= DEBUG_LEVEL_BH ) | |
2127 | printk( "%s(%d):%s bh_transmit() entry\n", | |
2128 | __FILE__,__LINE__,info->device_name); | |
2129 | ||
b963a844 | 2130 | if (tty) |
1da177e4 | 2131 | tty_wakeup(tty); |
1da177e4 LT |
2132 | } |
2133 | ||
ce9f9f73 | 2134 | static void bh_status(SLMP_INFO *info) |
1da177e4 LT |
2135 | { |
2136 | if ( debug_level >= DEBUG_LEVEL_BH ) | |
2137 | printk( "%s(%d):%s bh_status() entry\n", | |
2138 | __FILE__,__LINE__,info->device_name); | |
2139 | ||
2140 | info->ri_chkcount = 0; | |
2141 | info->dsr_chkcount = 0; | |
2142 | info->dcd_chkcount = 0; | |
2143 | info->cts_chkcount = 0; | |
2144 | } | |
2145 | ||
ce9f9f73 | 2146 | static void isr_timer(SLMP_INFO * info) |
1da177e4 LT |
2147 | { |
2148 | unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0; | |
2149 | ||
2150 | /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */ | |
2151 | write_reg(info, IER2, 0); | |
2152 | ||
2153 | /* TMCS, Timer Control/Status Register | |
2154 | * | |
2155 | * 07 CMF, Compare match flag (read only) 1=match | |
2156 | * 06 ECMI, CMF Interrupt Enable: 0=disabled | |
2157 | * 05 Reserved, must be 0 | |
2158 | * 04 TME, Timer Enable | |
2159 | * 03..00 Reserved, must be 0 | |
2160 | * | |
2161 | * 0000 0000 | |
2162 | */ | |
2163 | write_reg(info, (unsigned char)(timer + TMCS), 0); | |
2164 | ||
0fab6de0 | 2165 | info->irq_occurred = true; |
1da177e4 LT |
2166 | |
2167 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
2168 | printk("%s(%d):%s isr_timer()\n", | |
2169 | __FILE__,__LINE__,info->device_name); | |
2170 | } | |
2171 | ||
ce9f9f73 | 2172 | static void isr_rxint(SLMP_INFO * info) |
1da177e4 LT |
2173 | { |
2174 | struct tty_struct *tty = info->tty; | |
2175 | struct mgsl_icount *icount = &info->icount; | |
2176 | unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD); | |
2177 | unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN; | |
2178 | ||
2179 | /* clear status bits */ | |
2180 | if (status) | |
2181 | write_reg(info, SR1, status); | |
2182 | ||
2183 | if (status2) | |
2184 | write_reg(info, SR2, status2); | |
2185 | ||
2186 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
2187 | printk("%s(%d):%s isr_rxint status=%02X %02x\n", | |
2188 | __FILE__,__LINE__,info->device_name,status,status2); | |
2189 | ||
2190 | if (info->params.mode == MGSL_MODE_ASYNC) { | |
2191 | if (status & BRKD) { | |
2192 | icount->brk++; | |
2193 | ||
2194 | /* process break detection if tty control | |
2195 | * is not set to ignore it | |
2196 | */ | |
2197 | if ( tty ) { | |
2198 | if (!(status & info->ignore_status_mask1)) { | |
2199 | if (info->read_status_mask1 & BRKD) { | |
33f0f88f | 2200 | tty_insert_flip_char(tty, 0, TTY_BREAK); |
1da177e4 LT |
2201 | if (info->flags & ASYNC_SAK) |
2202 | do_SAK(tty); | |
2203 | } | |
2204 | } | |
2205 | } | |
2206 | } | |
2207 | } | |
2208 | else { | |
2209 | if (status & (FLGD|IDLD)) { | |
2210 | if (status & FLGD) | |
2211 | info->icount.exithunt++; | |
2212 | else if (status & IDLD) | |
2213 | info->icount.rxidle++; | |
2214 | wake_up_interruptible(&info->event_wait_q); | |
2215 | } | |
2216 | } | |
2217 | ||
2218 | if (status & CDCD) { | |
2219 | /* simulate a common modem status change interrupt | |
2220 | * for our handler | |
2221 | */ | |
2222 | get_signals( info ); | |
2223 | isr_io_pin(info, | |
2224 | MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD)); | |
2225 | } | |
2226 | } | |
2227 | ||
2228 | /* | |
2229 | * handle async rx data interrupts | |
2230 | */ | |
ce9f9f73 | 2231 | static void isr_rxrdy(SLMP_INFO * info) |
1da177e4 LT |
2232 | { |
2233 | u16 status; | |
2234 | unsigned char DataByte; | |
2235 | struct tty_struct *tty = info->tty; | |
2236 | struct mgsl_icount *icount = &info->icount; | |
2237 | ||
2238 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
2239 | printk("%s(%d):%s isr_rxrdy\n", | |
2240 | __FILE__,__LINE__,info->device_name); | |
2241 | ||
2242 | while((status = read_reg(info,CST0)) & BIT0) | |
2243 | { | |
33f0f88f | 2244 | int flag = 0; |
0fab6de0 | 2245 | bool over = false; |
1da177e4 LT |
2246 | DataByte = read_reg(info,TRB); |
2247 | ||
1da177e4 LT |
2248 | icount->rx++; |
2249 | ||
2250 | if ( status & (PE + FRME + OVRN) ) { | |
2251 | printk("%s(%d):%s rxerr=%04X\n", | |
2252 | __FILE__,__LINE__,info->device_name,status); | |
2253 | ||
2254 | /* update error statistics */ | |
2255 | if (status & PE) | |
2256 | icount->parity++; | |
2257 | else if (status & FRME) | |
2258 | icount->frame++; | |
2259 | else if (status & OVRN) | |
2260 | icount->overrun++; | |
2261 | ||
2262 | /* discard char if tty control flags say so */ | |
2263 | if (status & info->ignore_status_mask2) | |
2264 | continue; | |
2265 | ||
2266 | status &= info->read_status_mask2; | |
2267 | ||
2268 | if ( tty ) { | |
2269 | if (status & PE) | |
33f0f88f | 2270 | flag = TTY_PARITY; |
1da177e4 | 2271 | else if (status & FRME) |
33f0f88f | 2272 | flag = TTY_FRAME; |
1da177e4 LT |
2273 | if (status & OVRN) { |
2274 | /* Overrun is special, since it's | |
2275 | * reported immediately, and doesn't | |
2276 | * affect the current character | |
2277 | */ | |
0fab6de0 | 2278 | over = true; |
1da177e4 LT |
2279 | } |
2280 | } | |
2281 | } /* end of if (error) */ | |
2282 | ||
2283 | if ( tty ) { | |
33f0f88f AC |
2284 | tty_insert_flip_char(tty, DataByte, flag); |
2285 | if (over) | |
2286 | tty_insert_flip_char(tty, 0, TTY_OVERRUN); | |
1da177e4 LT |
2287 | } |
2288 | } | |
2289 | ||
2290 | if ( debug_level >= DEBUG_LEVEL_ISR ) { | |
1da177e4 LT |
2291 | printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n", |
2292 | __FILE__,__LINE__,info->device_name, | |
2293 | icount->rx,icount->brk,icount->parity, | |
2294 | icount->frame,icount->overrun); | |
2295 | } | |
2296 | ||
33f0f88f | 2297 | if ( tty ) |
1da177e4 LT |
2298 | tty_flip_buffer_push(tty); |
2299 | } | |
2300 | ||
2301 | static void isr_txeom(SLMP_INFO * info, unsigned char status) | |
2302 | { | |
2303 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
2304 | printk("%s(%d):%s isr_txeom status=%02x\n", | |
2305 | __FILE__,__LINE__,info->device_name,status); | |
2306 | ||
2307 | write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */ | |
2308 | write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */ | |
2309 | write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ | |
2310 | ||
2311 | if (status & UDRN) { | |
2312 | write_reg(info, CMD, TXRESET); | |
2313 | write_reg(info, CMD, TXENABLE); | |
2314 | } else | |
2315 | write_reg(info, CMD, TXBUFCLR); | |
2316 | ||
2317 | /* disable and clear tx interrupts */ | |
2318 | info->ie0_value &= ~TXRDYE; | |
2319 | info->ie1_value &= ~(IDLE + UDRN); | |
2320 | write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value)); | |
2321 | write_reg(info, SR1, (unsigned char)(UDRN + IDLE)); | |
2322 | ||
2323 | if ( info->tx_active ) { | |
2324 | if (info->params.mode != MGSL_MODE_ASYNC) { | |
2325 | if (status & UDRN) | |
2326 | info->icount.txunder++; | |
2327 | else if (status & IDLE) | |
2328 | info->icount.txok++; | |
2329 | } | |
2330 | ||
0fab6de0 | 2331 | info->tx_active = false; |
1da177e4 LT |
2332 | info->tx_count = info->tx_put = info->tx_get = 0; |
2333 | ||
2334 | del_timer(&info->tx_timer); | |
2335 | ||
2336 | if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) { | |
2337 | info->serial_signals &= ~SerialSignal_RTS; | |
0fab6de0 | 2338 | info->drop_rts_on_tx_done = false; |
1da177e4 LT |
2339 | set_signals(info); |
2340 | } | |
2341 | ||
af69c7f9 | 2342 | #if SYNCLINK_GENERIC_HDLC |
1da177e4 LT |
2343 | if (info->netcount) |
2344 | hdlcdev_tx_done(info); | |
2345 | else | |
2346 | #endif | |
2347 | { | |
2348 | if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) { | |
2349 | tx_stop(info); | |
2350 | return; | |
2351 | } | |
2352 | info->pending_bh |= BH_TRANSMIT; | |
2353 | } | |
2354 | } | |
2355 | } | |
2356 | ||
2357 | ||
2358 | /* | |
2359 | * handle tx status interrupts | |
2360 | */ | |
ce9f9f73 | 2361 | static void isr_txint(SLMP_INFO * info) |
1da177e4 LT |
2362 | { |
2363 | unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS); | |
2364 | ||
2365 | /* clear status bits */ | |
2366 | write_reg(info, SR1, status); | |
2367 | ||
2368 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
2369 | printk("%s(%d):%s isr_txint status=%02x\n", | |
2370 | __FILE__,__LINE__,info->device_name,status); | |
2371 | ||
2372 | if (status & (UDRN + IDLE)) | |
2373 | isr_txeom(info, status); | |
2374 | ||
2375 | if (status & CCTS) { | |
2376 | /* simulate a common modem status change interrupt | |
2377 | * for our handler | |
2378 | */ | |
2379 | get_signals( info ); | |
2380 | isr_io_pin(info, | |
2381 | MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS)); | |
2382 | ||
2383 | } | |
2384 | } | |
2385 | ||
2386 | /* | |
2387 | * handle async tx data interrupts | |
2388 | */ | |
ce9f9f73 | 2389 | static void isr_txrdy(SLMP_INFO * info) |
1da177e4 LT |
2390 | { |
2391 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
2392 | printk("%s(%d):%s isr_txrdy() tx_count=%d\n", | |
2393 | __FILE__,__LINE__,info->device_name,info->tx_count); | |
2394 | ||
2395 | if (info->params.mode != MGSL_MODE_ASYNC) { | |
2396 | /* disable TXRDY IRQ, enable IDLE IRQ */ | |
2397 | info->ie0_value &= ~TXRDYE; | |
2398 | info->ie1_value |= IDLE; | |
2399 | write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value)); | |
2400 | return; | |
2401 | } | |
2402 | ||
2403 | if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) { | |
2404 | tx_stop(info); | |
2405 | return; | |
2406 | } | |
2407 | ||
2408 | if ( info->tx_count ) | |
2409 | tx_load_fifo( info ); | |
2410 | else { | |
0fab6de0 | 2411 | info->tx_active = false; |
1da177e4 LT |
2412 | info->ie0_value &= ~TXRDYE; |
2413 | write_reg(info, IE0, info->ie0_value); | |
2414 | } | |
2415 | ||
2416 | if (info->tx_count < WAKEUP_CHARS) | |
2417 | info->pending_bh |= BH_TRANSMIT; | |
2418 | } | |
2419 | ||
ce9f9f73 | 2420 | static void isr_rxdmaok(SLMP_INFO * info) |
1da177e4 LT |
2421 | { |
2422 | /* BIT7 = EOT (end of transfer) | |
2423 | * BIT6 = EOM (end of message/frame) | |
2424 | */ | |
2425 | unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0; | |
2426 | ||
2427 | /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ | |
2428 | write_reg(info, RXDMA + DSR, (unsigned char)(status | 1)); | |
2429 | ||
2430 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
2431 | printk("%s(%d):%s isr_rxdmaok(), status=%02x\n", | |
2432 | __FILE__,__LINE__,info->device_name,status); | |
2433 | ||
2434 | info->pending_bh |= BH_RECEIVE; | |
2435 | } | |
2436 | ||
ce9f9f73 | 2437 | static void isr_rxdmaerror(SLMP_INFO * info) |
1da177e4 LT |
2438 | { |
2439 | /* BIT5 = BOF (buffer overflow) | |
2440 | * BIT4 = COF (counter overflow) | |
2441 | */ | |
2442 | unsigned char status = read_reg(info,RXDMA + DSR) & 0x30; | |
2443 | ||
2444 | /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ | |
2445 | write_reg(info, RXDMA + DSR, (unsigned char)(status | 1)); | |
2446 | ||
2447 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
2448 | printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n", | |
2449 | __FILE__,__LINE__,info->device_name,status); | |
2450 | ||
0fab6de0 | 2451 | info->rx_overflow = true; |
1da177e4 LT |
2452 | info->pending_bh |= BH_RECEIVE; |
2453 | } | |
2454 | ||
ce9f9f73 | 2455 | static void isr_txdmaok(SLMP_INFO * info) |
1da177e4 LT |
2456 | { |
2457 | unsigned char status_reg1 = read_reg(info, SR1); | |
2458 | ||
2459 | write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */ | |
2460 | write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */ | |
2461 | write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ | |
2462 | ||
2463 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
2464 | printk("%s(%d):%s isr_txdmaok(), status=%02x\n", | |
2465 | __FILE__,__LINE__,info->device_name,status_reg1); | |
2466 | ||
2467 | /* program TXRDY as FIFO empty flag, enable TXRDY IRQ */ | |
2468 | write_reg16(info, TRC0, 0); | |
2469 | info->ie0_value |= TXRDYE; | |
2470 | write_reg(info, IE0, info->ie0_value); | |
2471 | } | |
2472 | ||
ce9f9f73 | 2473 | static void isr_txdmaerror(SLMP_INFO * info) |
1da177e4 LT |
2474 | { |
2475 | /* BIT5 = BOF (buffer overflow) | |
2476 | * BIT4 = COF (counter overflow) | |
2477 | */ | |
2478 | unsigned char status = read_reg(info,TXDMA + DSR) & 0x30; | |
2479 | ||
2480 | /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ | |
2481 | write_reg(info, TXDMA + DSR, (unsigned char)(status | 1)); | |
2482 | ||
2483 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
2484 | printk("%s(%d):%s isr_txdmaerror(), status=%02x\n", | |
2485 | __FILE__,__LINE__,info->device_name,status); | |
2486 | } | |
2487 | ||
2488 | /* handle input serial signal changes | |
2489 | */ | |
ce9f9f73 | 2490 | static void isr_io_pin( SLMP_INFO *info, u16 status ) |
1da177e4 LT |
2491 | { |
2492 | struct mgsl_icount *icount; | |
2493 | ||
2494 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
2495 | printk("%s(%d):isr_io_pin status=%04X\n", | |
2496 | __FILE__,__LINE__,status); | |
2497 | ||
2498 | if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED | | |
2499 | MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) { | |
2500 | icount = &info->icount; | |
2501 | /* update input line counters */ | |
2502 | if (status & MISCSTATUS_RI_LATCHED) { | |
2503 | icount->rng++; | |
2504 | if ( status & SerialSignal_RI ) | |
2505 | info->input_signal_events.ri_up++; | |
2506 | else | |
2507 | info->input_signal_events.ri_down++; | |
2508 | } | |
2509 | if (status & MISCSTATUS_DSR_LATCHED) { | |
2510 | icount->dsr++; | |
2511 | if ( status & SerialSignal_DSR ) | |
2512 | info->input_signal_events.dsr_up++; | |
2513 | else | |
2514 | info->input_signal_events.dsr_down++; | |
2515 | } | |
2516 | if (status & MISCSTATUS_DCD_LATCHED) { | |
2517 | if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) { | |
2518 | info->ie1_value &= ~CDCD; | |
2519 | write_reg(info, IE1, info->ie1_value); | |
2520 | } | |
2521 | icount->dcd++; | |
2522 | if (status & SerialSignal_DCD) { | |
2523 | info->input_signal_events.dcd_up++; | |
2524 | } else | |
2525 | info->input_signal_events.dcd_down++; | |
af69c7f9 | 2526 | #if SYNCLINK_GENERIC_HDLC |
fbeff3c1 KH |
2527 | if (info->netcount) { |
2528 | if (status & SerialSignal_DCD) | |
2529 | netif_carrier_on(info->netdev); | |
2530 | else | |
2531 | netif_carrier_off(info->netdev); | |
2532 | } | |
1da177e4 LT |
2533 | #endif |
2534 | } | |
2535 | if (status & MISCSTATUS_CTS_LATCHED) | |
2536 | { | |
2537 | if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) { | |
2538 | info->ie1_value &= ~CCTS; | |
2539 | write_reg(info, IE1, info->ie1_value); | |
2540 | } | |
2541 | icount->cts++; | |
2542 | if ( status & SerialSignal_CTS ) | |
2543 | info->input_signal_events.cts_up++; | |
2544 | else | |
2545 | info->input_signal_events.cts_down++; | |
2546 | } | |
2547 | wake_up_interruptible(&info->status_event_wait_q); | |
2548 | wake_up_interruptible(&info->event_wait_q); | |
2549 | ||
2550 | if ( (info->flags & ASYNC_CHECK_CD) && | |
2551 | (status & MISCSTATUS_DCD_LATCHED) ) { | |
2552 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
2553 | printk("%s CD now %s...", info->device_name, | |
2554 | (status & SerialSignal_DCD) ? "on" : "off"); | |
2555 | if (status & SerialSignal_DCD) | |
2556 | wake_up_interruptible(&info->open_wait); | |
2557 | else { | |
2558 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
2559 | printk("doing serial hangup..."); | |
2560 | if (info->tty) | |
2561 | tty_hangup(info->tty); | |
2562 | } | |
2563 | } | |
2564 | ||
2565 | if ( (info->flags & ASYNC_CTS_FLOW) && | |
2566 | (status & MISCSTATUS_CTS_LATCHED) ) { | |
2567 | if ( info->tty ) { | |
2568 | if (info->tty->hw_stopped) { | |
2569 | if (status & SerialSignal_CTS) { | |
2570 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
2571 | printk("CTS tx start..."); | |
2572 | info->tty->hw_stopped = 0; | |
2573 | tx_start(info); | |
2574 | info->pending_bh |= BH_TRANSMIT; | |
2575 | return; | |
2576 | } | |
2577 | } else { | |
2578 | if (!(status & SerialSignal_CTS)) { | |
2579 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
2580 | printk("CTS tx stop..."); | |
2581 | info->tty->hw_stopped = 1; | |
2582 | tx_stop(info); | |
2583 | } | |
2584 | } | |
2585 | } | |
2586 | } | |
2587 | } | |
2588 | ||
2589 | info->pending_bh |= BH_STATUS; | |
2590 | } | |
2591 | ||
2592 | /* Interrupt service routine entry point. | |
2593 | * | |
2594 | * Arguments: | |
2595 | * irq interrupt number that caused interrupt | |
2596 | * dev_id device ID supplied during interrupt registration | |
2597 | * regs interrupted processor context | |
2598 | */ | |
a6f97b29 | 2599 | static irqreturn_t synclinkmp_interrupt(int dummy, void *dev_id) |
1da177e4 | 2600 | { |
a6f97b29 | 2601 | SLMP_INFO *info = dev_id; |
1da177e4 LT |
2602 | unsigned char status, status0, status1=0; |
2603 | unsigned char dmastatus, dmastatus0, dmastatus1=0; | |
2604 | unsigned char timerstatus0, timerstatus1=0; | |
2605 | unsigned char shift; | |
2606 | unsigned int i; | |
2607 | unsigned short tmp; | |
2608 | ||
2609 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
a6f97b29 JG |
2610 | printk(KERN_DEBUG "%s(%d): synclinkmp_interrupt(%d)entry.\n", |
2611 | __FILE__, __LINE__, info->irq_level); | |
1da177e4 LT |
2612 | |
2613 | spin_lock(&info->lock); | |
2614 | ||
2615 | for(;;) { | |
2616 | ||
2617 | /* get status for SCA0 (ports 0-1) */ | |
2618 | tmp = read_reg16(info, ISR0); /* get ISR0 and ISR1 in one read */ | |
2619 | status0 = (unsigned char)tmp; | |
2620 | dmastatus0 = (unsigned char)(tmp>>8); | |
2621 | timerstatus0 = read_reg(info, ISR2); | |
2622 | ||
2623 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
a6f97b29 JG |
2624 | printk(KERN_DEBUG "%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n", |
2625 | __FILE__, __LINE__, info->device_name, | |
2626 | status0, dmastatus0, timerstatus0); | |
1da177e4 LT |
2627 | |
2628 | if (info->port_count == 4) { | |
2629 | /* get status for SCA1 (ports 2-3) */ | |
2630 | tmp = read_reg16(info->port_array[2], ISR0); | |
2631 | status1 = (unsigned char)tmp; | |
2632 | dmastatus1 = (unsigned char)(tmp>>8); | |
2633 | timerstatus1 = read_reg(info->port_array[2], ISR2); | |
2634 | ||
2635 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
2636 | printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n", | |
2637 | __FILE__,__LINE__,info->device_name, | |
2638 | status1,dmastatus1,timerstatus1); | |
2639 | } | |
2640 | ||
2641 | if (!status0 && !dmastatus0 && !timerstatus0 && | |
2642 | !status1 && !dmastatus1 && !timerstatus1) | |
2643 | break; | |
2644 | ||
2645 | for(i=0; i < info->port_count ; i++) { | |
2646 | if (info->port_array[i] == NULL) | |
2647 | continue; | |
2648 | if (i < 2) { | |
2649 | status = status0; | |
2650 | dmastatus = dmastatus0; | |
2651 | } else { | |
2652 | status = status1; | |
2653 | dmastatus = dmastatus1; | |
2654 | } | |
2655 | ||
2656 | shift = i & 1 ? 4 :0; | |
2657 | ||
2658 | if (status & BIT0 << shift) | |
2659 | isr_rxrdy(info->port_array[i]); | |
2660 | if (status & BIT1 << shift) | |
2661 | isr_txrdy(info->port_array[i]); | |
2662 | if (status & BIT2 << shift) | |
2663 | isr_rxint(info->port_array[i]); | |
2664 | if (status & BIT3 << shift) | |
2665 | isr_txint(info->port_array[i]); | |
2666 | ||
2667 | if (dmastatus & BIT0 << shift) | |
2668 | isr_rxdmaerror(info->port_array[i]); | |
2669 | if (dmastatus & BIT1 << shift) | |
2670 | isr_rxdmaok(info->port_array[i]); | |
2671 | if (dmastatus & BIT2 << shift) | |
2672 | isr_txdmaerror(info->port_array[i]); | |
2673 | if (dmastatus & BIT3 << shift) | |
2674 | isr_txdmaok(info->port_array[i]); | |
2675 | } | |
2676 | ||
2677 | if (timerstatus0 & (BIT5 | BIT4)) | |
2678 | isr_timer(info->port_array[0]); | |
2679 | if (timerstatus0 & (BIT7 | BIT6)) | |
2680 | isr_timer(info->port_array[1]); | |
2681 | if (timerstatus1 & (BIT5 | BIT4)) | |
2682 | isr_timer(info->port_array[2]); | |
2683 | if (timerstatus1 & (BIT7 | BIT6)) | |
2684 | isr_timer(info->port_array[3]); | |
2685 | } | |
2686 | ||
2687 | for(i=0; i < info->port_count ; i++) { | |
2688 | SLMP_INFO * port = info->port_array[i]; | |
2689 | ||
2690 | /* Request bottom half processing if there's something | |
2691 | * for it to do and the bh is not already running. | |
2692 | * | |
2693 | * Note: startup adapter diags require interrupts. | |
2694 | * do not request bottom half processing if the | |
2695 | * device is not open in a normal mode. | |
2696 | */ | |
2697 | if ( port && (port->count || port->netcount) && | |
2698 | port->pending_bh && !port->bh_running && | |
2699 | !port->bh_requested ) { | |
2700 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
2701 | printk("%s(%d):%s queueing bh task.\n", | |
2702 | __FILE__,__LINE__,port->device_name); | |
2703 | schedule_work(&port->task); | |
0fab6de0 | 2704 | port->bh_requested = true; |
1da177e4 LT |
2705 | } |
2706 | } | |
2707 | ||
2708 | spin_unlock(&info->lock); | |
2709 | ||
2710 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
a6f97b29 JG |
2711 | printk(KERN_DEBUG "%s(%d):synclinkmp_interrupt(%d)exit.\n", |
2712 | __FILE__, __LINE__, info->irq_level); | |
1da177e4 LT |
2713 | return IRQ_HANDLED; |
2714 | } | |
2715 | ||
2716 | /* Initialize and start device. | |
2717 | */ | |
2718 | static int startup(SLMP_INFO * info) | |
2719 | { | |
2720 | if ( debug_level >= DEBUG_LEVEL_INFO ) | |
2721 | printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name); | |
2722 | ||
2723 | if (info->flags & ASYNC_INITIALIZED) | |
2724 | return 0; | |
2725 | ||
2726 | if (!info->tx_buf) { | |
5cbded58 | 2727 | info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); |
1da177e4 LT |
2728 | if (!info->tx_buf) { |
2729 | printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n", | |
2730 | __FILE__,__LINE__,info->device_name); | |
2731 | return -ENOMEM; | |
2732 | } | |
2733 | } | |
2734 | ||
2735 | info->pending_bh = 0; | |
2736 | ||
166692e4 PF |
2737 | memset(&info->icount, 0, sizeof(info->icount)); |
2738 | ||
1da177e4 LT |
2739 | /* program hardware for current parameters */ |
2740 | reset_port(info); | |
2741 | ||
2742 | change_params(info); | |
2743 | ||
40565f19 | 2744 | mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10)); |
1da177e4 LT |
2745 | |
2746 | if (info->tty) | |
2747 | clear_bit(TTY_IO_ERROR, &info->tty->flags); | |
2748 | ||
2749 | info->flags |= ASYNC_INITIALIZED; | |
2750 | ||
2751 | return 0; | |
2752 | } | |
2753 | ||
2754 | /* Called by close() and hangup() to shutdown hardware | |
2755 | */ | |
2756 | static void shutdown(SLMP_INFO * info) | |
2757 | { | |
2758 | unsigned long flags; | |
2759 | ||
2760 | if (!(info->flags & ASYNC_INITIALIZED)) | |
2761 | return; | |
2762 | ||
2763 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2764 | printk("%s(%d):%s synclinkmp_shutdown()\n", | |
2765 | __FILE__,__LINE__, info->device_name ); | |
2766 | ||
2767 | /* clear status wait queue because status changes */ | |
2768 | /* can't happen after shutting down the hardware */ | |
2769 | wake_up_interruptible(&info->status_event_wait_q); | |
2770 | wake_up_interruptible(&info->event_wait_q); | |
2771 | ||
2772 | del_timer(&info->tx_timer); | |
2773 | del_timer(&info->status_timer); | |
2774 | ||
735d5661 JJ |
2775 | kfree(info->tx_buf); |
2776 | info->tx_buf = NULL; | |
1da177e4 LT |
2777 | |
2778 | spin_lock_irqsave(&info->lock,flags); | |
2779 | ||
2780 | reset_port(info); | |
2781 | ||
2782 | if (!info->tty || info->tty->termios->c_cflag & HUPCL) { | |
2783 | info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); | |
2784 | set_signals(info); | |
2785 | } | |
2786 | ||
2787 | spin_unlock_irqrestore(&info->lock,flags); | |
2788 | ||
2789 | if (info->tty) | |
2790 | set_bit(TTY_IO_ERROR, &info->tty->flags); | |
2791 | ||
2792 | info->flags &= ~ASYNC_INITIALIZED; | |
2793 | } | |
2794 | ||
2795 | static void program_hw(SLMP_INFO *info) | |
2796 | { | |
2797 | unsigned long flags; | |
2798 | ||
2799 | spin_lock_irqsave(&info->lock,flags); | |
2800 | ||
2801 | rx_stop(info); | |
2802 | tx_stop(info); | |
2803 | ||
2804 | info->tx_count = info->tx_put = info->tx_get = 0; | |
2805 | ||
2806 | if (info->params.mode == MGSL_MODE_HDLC || info->netcount) | |
2807 | hdlc_mode(info); | |
2808 | else | |
2809 | async_mode(info); | |
2810 | ||
2811 | set_signals(info); | |
2812 | ||
2813 | info->dcd_chkcount = 0; | |
2814 | info->cts_chkcount = 0; | |
2815 | info->ri_chkcount = 0; | |
2816 | info->dsr_chkcount = 0; | |
2817 | ||
2818 | info->ie1_value |= (CDCD|CCTS); | |
2819 | write_reg(info, IE1, info->ie1_value); | |
2820 | ||
2821 | get_signals(info); | |
2822 | ||
2823 | if (info->netcount || (info->tty && info->tty->termios->c_cflag & CREAD) ) | |
2824 | rx_start(info); | |
2825 | ||
2826 | spin_unlock_irqrestore(&info->lock,flags); | |
2827 | } | |
2828 | ||
2829 | /* Reconfigure adapter based on new parameters | |
2830 | */ | |
2831 | static void change_params(SLMP_INFO *info) | |
2832 | { | |
2833 | unsigned cflag; | |
2834 | int bits_per_char; | |
2835 | ||
2836 | if (!info->tty || !info->tty->termios) | |
2837 | return; | |
2838 | ||
2839 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2840 | printk("%s(%d):%s change_params()\n", | |
2841 | __FILE__,__LINE__, info->device_name ); | |
2842 | ||
2843 | cflag = info->tty->termios->c_cflag; | |
2844 | ||
2845 | /* if B0 rate (hangup) specified then negate DTR and RTS */ | |
2846 | /* otherwise assert DTR and RTS */ | |
2847 | if (cflag & CBAUD) | |
2848 | info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; | |
2849 | else | |
2850 | info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); | |
2851 | ||
2852 | /* byte size and parity */ | |
2853 | ||
2854 | switch (cflag & CSIZE) { | |
2855 | case CS5: info->params.data_bits = 5; break; | |
2856 | case CS6: info->params.data_bits = 6; break; | |
2857 | case CS7: info->params.data_bits = 7; break; | |
2858 | case CS8: info->params.data_bits = 8; break; | |
2859 | /* Never happens, but GCC is too dumb to figure it out */ | |
2860 | default: info->params.data_bits = 7; break; | |
2861 | } | |
2862 | ||
2863 | if (cflag & CSTOPB) | |
2864 | info->params.stop_bits = 2; | |
2865 | else | |
2866 | info->params.stop_bits = 1; | |
2867 | ||
2868 | info->params.parity = ASYNC_PARITY_NONE; | |
2869 | if (cflag & PARENB) { | |
2870 | if (cflag & PARODD) | |
2871 | info->params.parity = ASYNC_PARITY_ODD; | |
2872 | else | |
2873 | info->params.parity = ASYNC_PARITY_EVEN; | |
2874 | #ifdef CMSPAR | |
2875 | if (cflag & CMSPAR) | |
2876 | info->params.parity = ASYNC_PARITY_SPACE; | |
2877 | #endif | |
2878 | } | |
2879 | ||
2880 | /* calculate number of jiffies to transmit a full | |
2881 | * FIFO (32 bytes) at specified data rate | |
2882 | */ | |
2883 | bits_per_char = info->params.data_bits + | |
2884 | info->params.stop_bits + 1; | |
2885 | ||
2886 | /* if port data rate is set to 460800 or less then | |
2887 | * allow tty settings to override, otherwise keep the | |
2888 | * current data rate. | |
2889 | */ | |
2890 | if (info->params.data_rate <= 460800) { | |
2891 | info->params.data_rate = tty_get_baud_rate(info->tty); | |
2892 | } | |
2893 | ||
2894 | if ( info->params.data_rate ) { | |
2895 | info->timeout = (32*HZ*bits_per_char) / | |
2896 | info->params.data_rate; | |
2897 | } | |
2898 | info->timeout += HZ/50; /* Add .02 seconds of slop */ | |
2899 | ||
2900 | if (cflag & CRTSCTS) | |
2901 | info->flags |= ASYNC_CTS_FLOW; | |
2902 | else | |
2903 | info->flags &= ~ASYNC_CTS_FLOW; | |
2904 | ||
2905 | if (cflag & CLOCAL) | |
2906 | info->flags &= ~ASYNC_CHECK_CD; | |
2907 | else | |
2908 | info->flags |= ASYNC_CHECK_CD; | |
2909 | ||
2910 | /* process tty input control flags */ | |
2911 | ||
2912 | info->read_status_mask2 = OVRN; | |
2913 | if (I_INPCK(info->tty)) | |
2914 | info->read_status_mask2 |= PE | FRME; | |
2915 | if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) | |
2916 | info->read_status_mask1 |= BRKD; | |
2917 | if (I_IGNPAR(info->tty)) | |
2918 | info->ignore_status_mask2 |= PE | FRME; | |
2919 | if (I_IGNBRK(info->tty)) { | |
2920 | info->ignore_status_mask1 |= BRKD; | |
2921 | /* If ignoring parity and break indicators, ignore | |
2922 | * overruns too. (For real raw support). | |
2923 | */ | |
2924 | if (I_IGNPAR(info->tty)) | |
2925 | info->ignore_status_mask2 |= OVRN; | |
2926 | } | |
2927 | ||
2928 | program_hw(info); | |
2929 | } | |
2930 | ||
2931 | static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount) | |
2932 | { | |
2933 | int err; | |
2934 | ||
2935 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2936 | printk("%s(%d):%s get_params()\n", | |
2937 | __FILE__,__LINE__, info->device_name); | |
2938 | ||
166692e4 PF |
2939 | if (!user_icount) { |
2940 | memset(&info->icount, 0, sizeof(info->icount)); | |
2941 | } else { | |
2942 | COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount)); | |
2943 | if (err) | |
2944 | return -EFAULT; | |
1da177e4 LT |
2945 | } |
2946 | ||
2947 | return 0; | |
2948 | } | |
2949 | ||
2950 | static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params) | |
2951 | { | |
2952 | int err; | |
2953 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2954 | printk("%s(%d):%s get_params()\n", | |
2955 | __FILE__,__LINE__, info->device_name); | |
2956 | ||
2957 | COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS)); | |
2958 | if (err) { | |
2959 | if ( debug_level >= DEBUG_LEVEL_INFO ) | |
2960 | printk( "%s(%d):%s get_params() user buffer copy failed\n", | |
2961 | __FILE__,__LINE__,info->device_name); | |
2962 | return -EFAULT; | |
2963 | } | |
2964 | ||
2965 | return 0; | |
2966 | } | |
2967 | ||
2968 | static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params) | |
2969 | { | |
2970 | unsigned long flags; | |
2971 | MGSL_PARAMS tmp_params; | |
2972 | int err; | |
2973 | ||
2974 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2975 | printk("%s(%d):%s set_params\n", | |
2976 | __FILE__,__LINE__,info->device_name ); | |
2977 | COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS)); | |
2978 | if (err) { | |
2979 | if ( debug_level >= DEBUG_LEVEL_INFO ) | |
2980 | printk( "%s(%d):%s set_params() user buffer copy failed\n", | |
2981 | __FILE__,__LINE__,info->device_name); | |
2982 | return -EFAULT; | |
2983 | } | |
2984 | ||
2985 | spin_lock_irqsave(&info->lock,flags); | |
2986 | memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); | |
2987 | spin_unlock_irqrestore(&info->lock,flags); | |
2988 | ||
2989 | change_params(info); | |
2990 | ||
2991 | return 0; | |
2992 | } | |
2993 | ||
2994 | static int get_txidle(SLMP_INFO * info, int __user *idle_mode) | |
2995 | { | |
2996 | int err; | |
2997 | ||
2998 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2999 | printk("%s(%d):%s get_txidle()=%d\n", | |
3000 | __FILE__,__LINE__, info->device_name, info->idle_mode); | |
3001 | ||
3002 | COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int)); | |
3003 | if (err) { | |
3004 | if ( debug_level >= DEBUG_LEVEL_INFO ) | |
3005 | printk( "%s(%d):%s get_txidle() user buffer copy failed\n", | |
3006 | __FILE__,__LINE__,info->device_name); | |
3007 | return -EFAULT; | |
3008 | } | |
3009 | ||
3010 | return 0; | |
3011 | } | |
3012 | ||
3013 | static int set_txidle(SLMP_INFO * info, int idle_mode) | |
3014 | { | |
3015 | unsigned long flags; | |
3016 | ||
3017 | if (debug_level >= DEBUG_LEVEL_INFO) | |
3018 | printk("%s(%d):%s set_txidle(%d)\n", | |
3019 | __FILE__,__LINE__,info->device_name, idle_mode ); | |
3020 | ||
3021 | spin_lock_irqsave(&info->lock,flags); | |
3022 | info->idle_mode = idle_mode; | |
3023 | tx_set_idle( info ); | |
3024 | spin_unlock_irqrestore(&info->lock,flags); | |
3025 | return 0; | |
3026 | } | |
3027 | ||
3028 | static int tx_enable(SLMP_INFO * info, int enable) | |
3029 | { | |
3030 | unsigned long flags; | |
3031 | ||
3032 | if (debug_level >= DEBUG_LEVEL_INFO) | |
3033 | printk("%s(%d):%s tx_enable(%d)\n", | |
3034 | __FILE__,__LINE__,info->device_name, enable); | |
3035 | ||
3036 | spin_lock_irqsave(&info->lock,flags); | |
3037 | if ( enable ) { | |
3038 | if ( !info->tx_enabled ) { | |
3039 | tx_start(info); | |
3040 | } | |
3041 | } else { | |
3042 | if ( info->tx_enabled ) | |
3043 | tx_stop(info); | |
3044 | } | |
3045 | spin_unlock_irqrestore(&info->lock,flags); | |
3046 | return 0; | |
3047 | } | |
3048 | ||
3049 | /* abort send HDLC frame | |
3050 | */ | |
3051 | static int tx_abort(SLMP_INFO * info) | |
3052 | { | |
3053 | unsigned long flags; | |
3054 | ||
3055 | if (debug_level >= DEBUG_LEVEL_INFO) | |
3056 | printk("%s(%d):%s tx_abort()\n", | |
3057 | __FILE__,__LINE__,info->device_name); | |
3058 | ||
3059 | spin_lock_irqsave(&info->lock,flags); | |
3060 | if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) { | |
3061 | info->ie1_value &= ~UDRN; | |
3062 | info->ie1_value |= IDLE; | |
3063 | write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */ | |
3064 | write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */ | |
3065 | ||
3066 | write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ | |
3067 | write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ | |
3068 | ||
3069 | write_reg(info, CMD, TXABORT); | |
3070 | } | |
3071 | spin_unlock_irqrestore(&info->lock,flags); | |
3072 | return 0; | |
3073 | } | |
3074 | ||
3075 | static int rx_enable(SLMP_INFO * info, int enable) | |
3076 | { | |
3077 | unsigned long flags; | |
3078 | ||
3079 | if (debug_level >= DEBUG_LEVEL_INFO) | |
3080 | printk("%s(%d):%s rx_enable(%d)\n", | |
3081 | __FILE__,__LINE__,info->device_name,enable); | |
3082 | ||
3083 | spin_lock_irqsave(&info->lock,flags); | |
3084 | if ( enable ) { | |
3085 | if ( !info->rx_enabled ) | |
3086 | rx_start(info); | |
3087 | } else { | |
3088 | if ( info->rx_enabled ) | |
3089 | rx_stop(info); | |
3090 | } | |
3091 | spin_unlock_irqrestore(&info->lock,flags); | |
3092 | return 0; | |
3093 | } | |
3094 | ||
1da177e4 LT |
3095 | /* wait for specified event to occur |
3096 | */ | |
3097 | static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr) | |
3098 | { | |
3099 | unsigned long flags; | |
3100 | int s; | |
3101 | int rc=0; | |
3102 | struct mgsl_icount cprev, cnow; | |
3103 | int events; | |
3104 | int mask; | |
3105 | struct _input_signal_events oldsigs, newsigs; | |
3106 | DECLARE_WAITQUEUE(wait, current); | |
3107 | ||
3108 | COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int)); | |
3109 | if (rc) { | |
3110 | return -EFAULT; | |
3111 | } | |
3112 | ||
3113 | if (debug_level >= DEBUG_LEVEL_INFO) | |
3114 | printk("%s(%d):%s wait_mgsl_event(%d)\n", | |
3115 | __FILE__,__LINE__,info->device_name,mask); | |
3116 | ||
3117 | spin_lock_irqsave(&info->lock,flags); | |
3118 | ||
3119 | /* return immediately if state matches requested events */ | |
3120 | get_signals(info); | |
7f3edb94 | 3121 | s = info->serial_signals; |
1da177e4 LT |
3122 | |
3123 | events = mask & | |
3124 | ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + | |
3125 | ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + | |
3126 | ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + | |
3127 | ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); | |
3128 | if (events) { | |
3129 | spin_unlock_irqrestore(&info->lock,flags); | |
3130 | goto exit; | |
3131 | } | |
3132 | ||
3133 | /* save current irq counts */ | |
3134 | cprev = info->icount; | |
3135 | oldsigs = info->input_signal_events; | |
3136 | ||
3137 | /* enable hunt and idle irqs if needed */ | |
3138 | if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) { | |
3139 | unsigned char oldval = info->ie1_value; | |
3140 | unsigned char newval = oldval + | |
3141 | (mask & MgslEvent_ExitHuntMode ? FLGD:0) + | |
3142 | (mask & MgslEvent_IdleReceived ? IDLD:0); | |
3143 | if ( oldval != newval ) { | |
3144 | info->ie1_value = newval; | |
3145 | write_reg(info, IE1, info->ie1_value); | |
3146 | } | |
3147 | } | |
3148 | ||
3149 | set_current_state(TASK_INTERRUPTIBLE); | |
3150 | add_wait_queue(&info->event_wait_q, &wait); | |
3151 | ||
3152 | spin_unlock_irqrestore(&info->lock,flags); | |
3153 | ||
3154 | for(;;) { | |
3155 | schedule(); | |
3156 | if (signal_pending(current)) { | |
3157 | rc = -ERESTARTSYS; | |
3158 | break; | |
3159 | } | |
3160 | ||
3161 | /* get current irq counts */ | |
3162 | spin_lock_irqsave(&info->lock,flags); | |
3163 | cnow = info->icount; | |
3164 | newsigs = info->input_signal_events; | |
3165 | set_current_state(TASK_INTERRUPTIBLE); | |
3166 | spin_unlock_irqrestore(&info->lock,flags); | |
3167 | ||
3168 | /* if no change, wait aborted for some reason */ | |
3169 | if (newsigs.dsr_up == oldsigs.dsr_up && | |
3170 | newsigs.dsr_down == oldsigs.dsr_down && | |
3171 | newsigs.dcd_up == oldsigs.dcd_up && | |
3172 | newsigs.dcd_down == oldsigs.dcd_down && | |
3173 | newsigs.cts_up == oldsigs.cts_up && | |
3174 | newsigs.cts_down == oldsigs.cts_down && | |
3175 | newsigs.ri_up == oldsigs.ri_up && | |
3176 | newsigs.ri_down == oldsigs.ri_down && | |
3177 | cnow.exithunt == cprev.exithunt && | |
3178 | cnow.rxidle == cprev.rxidle) { | |
3179 | rc = -EIO; | |
3180 | break; | |
3181 | } | |
3182 | ||
3183 | events = mask & | |
3184 | ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + | |
3185 | (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + | |
3186 | (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + | |
3187 | (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + | |
3188 | (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + | |
3189 | (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + | |
3190 | (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + | |
3191 | (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + | |
3192 | (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + | |
3193 | (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); | |
3194 | if (events) | |
3195 | break; | |
3196 | ||
3197 | cprev = cnow; | |
3198 | oldsigs = newsigs; | |
3199 | } | |
3200 | ||
3201 | remove_wait_queue(&info->event_wait_q, &wait); | |
3202 | set_current_state(TASK_RUNNING); | |
3203 | ||
3204 | ||
3205 | if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { | |
3206 | spin_lock_irqsave(&info->lock,flags); | |
3207 | if (!waitqueue_active(&info->event_wait_q)) { | |
3208 | /* disable enable exit hunt mode/idle rcvd IRQs */ | |
3209 | info->ie1_value &= ~(FLGD|IDLD); | |
3210 | write_reg(info, IE1, info->ie1_value); | |
3211 | } | |
3212 | spin_unlock_irqrestore(&info->lock,flags); | |
3213 | } | |
3214 | exit: | |
3215 | if ( rc == 0 ) | |
3216 | PUT_USER(rc, events, mask_ptr); | |
3217 | ||
3218 | return rc; | |
3219 | } | |
3220 | ||
3221 | static int modem_input_wait(SLMP_INFO *info,int arg) | |
3222 | { | |
3223 | unsigned long flags; | |
3224 | int rc; | |
3225 | struct mgsl_icount cprev, cnow; | |
3226 | DECLARE_WAITQUEUE(wait, current); | |
3227 | ||
3228 | /* save current irq counts */ | |
3229 | spin_lock_irqsave(&info->lock,flags); | |
3230 | cprev = info->icount; | |
3231 | add_wait_queue(&info->status_event_wait_q, &wait); | |
3232 | set_current_state(TASK_INTERRUPTIBLE); | |
3233 | spin_unlock_irqrestore(&info->lock,flags); | |
3234 | ||
3235 | for(;;) { | |
3236 | schedule(); | |
3237 | if (signal_pending(current)) { | |
3238 | rc = -ERESTARTSYS; | |
3239 | break; | |
3240 | } | |
3241 | ||
3242 | /* get new irq counts */ | |
3243 | spin_lock_irqsave(&info->lock,flags); | |
3244 | cnow = info->icount; | |
3245 | set_current_state(TASK_INTERRUPTIBLE); | |
3246 | spin_unlock_irqrestore(&info->lock,flags); | |
3247 | ||
3248 | /* if no change, wait aborted for some reason */ | |
3249 | if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && | |
3250 | cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { | |
3251 | rc = -EIO; | |
3252 | break; | |
3253 | } | |
3254 | ||
3255 | /* check for change in caller specified modem input */ | |
3256 | if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || | |
3257 | (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || | |
3258 | (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || | |
3259 | (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { | |
3260 | rc = 0; | |
3261 | break; | |
3262 | } | |
3263 | ||
3264 | cprev = cnow; | |
3265 | } | |
3266 | remove_wait_queue(&info->status_event_wait_q, &wait); | |
3267 | set_current_state(TASK_RUNNING); | |
3268 | return rc; | |
3269 | } | |
3270 | ||
3271 | /* return the state of the serial control and status signals | |
3272 | */ | |
3273 | static int tiocmget(struct tty_struct *tty, struct file *file) | |
3274 | { | |
3275 | SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; | |
3276 | unsigned int result; | |
3277 | unsigned long flags; | |
3278 | ||
3279 | spin_lock_irqsave(&info->lock,flags); | |
3280 | get_signals(info); | |
3281 | spin_unlock_irqrestore(&info->lock,flags); | |
3282 | ||
3283 | result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) + | |
3284 | ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) + | |
3285 | ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) + | |
3286 | ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) + | |
3287 | ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) + | |
3288 | ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0); | |
3289 | ||
3290 | if (debug_level >= DEBUG_LEVEL_INFO) | |
3291 | printk("%s(%d):%s tiocmget() value=%08X\n", | |
3292 | __FILE__,__LINE__, info->device_name, result ); | |
3293 | return result; | |
3294 | } | |
3295 | ||
3296 | /* set modem control signals (DTR/RTS) | |
3297 | */ | |
3298 | static int tiocmset(struct tty_struct *tty, struct file *file, | |
3299 | unsigned int set, unsigned int clear) | |
3300 | { | |
3301 | SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; | |
3302 | unsigned long flags; | |
3303 | ||
3304 | if (debug_level >= DEBUG_LEVEL_INFO) | |
3305 | printk("%s(%d):%s tiocmset(%x,%x)\n", | |
3306 | __FILE__,__LINE__,info->device_name, set, clear); | |
3307 | ||
3308 | if (set & TIOCM_RTS) | |
3309 | info->serial_signals |= SerialSignal_RTS; | |
3310 | if (set & TIOCM_DTR) | |
3311 | info->serial_signals |= SerialSignal_DTR; | |
3312 | if (clear & TIOCM_RTS) | |
3313 | info->serial_signals &= ~SerialSignal_RTS; | |
3314 | if (clear & TIOCM_DTR) | |
3315 | info->serial_signals &= ~SerialSignal_DTR; | |
3316 | ||
3317 | spin_lock_irqsave(&info->lock,flags); | |
3318 | set_signals(info); | |
3319 | spin_unlock_irqrestore(&info->lock,flags); | |
3320 | ||
3321 | return 0; | |
3322 | } | |
3323 | ||
3324 | ||
3325 | ||
3326 | /* Block the current process until the specified port is ready to open. | |
3327 | */ | |
3328 | static int block_til_ready(struct tty_struct *tty, struct file *filp, | |
3329 | SLMP_INFO *info) | |
3330 | { | |
3331 | DECLARE_WAITQUEUE(wait, current); | |
3332 | int retval; | |
0fab6de0 JP |
3333 | bool do_clocal = false; |
3334 | bool extra_count = false; | |
1da177e4 LT |
3335 | unsigned long flags; |
3336 | ||
3337 | if (debug_level >= DEBUG_LEVEL_INFO) | |
3338 | printk("%s(%d):%s block_til_ready()\n", | |
3339 | __FILE__,__LINE__, tty->driver->name ); | |
3340 | ||
3341 | if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ | |
3342 | /* nonblock mode is set or port is not enabled */ | |
3343 | /* just verify that callout device is not active */ | |
3344 | info->flags |= ASYNC_NORMAL_ACTIVE; | |
3345 | return 0; | |
3346 | } | |
3347 | ||
3348 | if (tty->termios->c_cflag & CLOCAL) | |
0fab6de0 | 3349 | do_clocal = true; |
1da177e4 LT |
3350 | |
3351 | /* Wait for carrier detect and the line to become | |
3352 | * free (i.e., not in use by the callout). While we are in | |
3353 | * this loop, info->count is dropped by one, so that | |
3354 | * close() knows when to free things. We restore it upon | |
3355 | * exit, either normal or abnormal. | |
3356 | */ | |
3357 | ||
3358 | retval = 0; | |
3359 | add_wait_queue(&info->open_wait, &wait); | |
3360 | ||
3361 | if (debug_level >= DEBUG_LEVEL_INFO) | |
3362 | printk("%s(%d):%s block_til_ready() before block, count=%d\n", | |
3363 | __FILE__,__LINE__, tty->driver->name, info->count ); | |
3364 | ||
3365 | spin_lock_irqsave(&info->lock, flags); | |
3366 | if (!tty_hung_up_p(filp)) { | |
0fab6de0 | 3367 | extra_count = true; |
1da177e4 LT |
3368 | info->count--; |
3369 | } | |
3370 | spin_unlock_irqrestore(&info->lock, flags); | |
3371 | info->blocked_open++; | |
3372 | ||
3373 | while (1) { | |
3374 | if ((tty->termios->c_cflag & CBAUD)) { | |
3375 | spin_lock_irqsave(&info->lock,flags); | |
3376 | info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; | |
3377 | set_signals(info); | |
3378 | spin_unlock_irqrestore(&info->lock,flags); | |
3379 | } | |
3380 | ||
3381 | set_current_state(TASK_INTERRUPTIBLE); | |
3382 | ||
3383 | if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){ | |
3384 | retval = (info->flags & ASYNC_HUP_NOTIFY) ? | |
3385 | -EAGAIN : -ERESTARTSYS; | |
3386 | break; | |
3387 | } | |
3388 | ||
3389 | spin_lock_irqsave(&info->lock,flags); | |
3390 | get_signals(info); | |
3391 | spin_unlock_irqrestore(&info->lock,flags); | |
3392 | ||
3393 | if (!(info->flags & ASYNC_CLOSING) && | |
3394 | (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) { | |
3395 | break; | |
3396 | } | |
3397 | ||
3398 | if (signal_pending(current)) { | |
3399 | retval = -ERESTARTSYS; | |
3400 | break; | |
3401 | } | |
3402 | ||
3403 | if (debug_level >= DEBUG_LEVEL_INFO) | |
3404 | printk("%s(%d):%s block_til_ready() count=%d\n", | |
3405 | __FILE__,__LINE__, tty->driver->name, info->count ); | |
3406 | ||
3407 | schedule(); | |
3408 | } | |
3409 | ||
3410 | set_current_state(TASK_RUNNING); | |
3411 | remove_wait_queue(&info->open_wait, &wait); | |
3412 | ||
3413 | if (extra_count) | |
3414 | info->count++; | |
3415 | info->blocked_open--; | |
3416 | ||
3417 | if (debug_level >= DEBUG_LEVEL_INFO) | |
3418 | printk("%s(%d):%s block_til_ready() after, count=%d\n", | |
3419 | __FILE__,__LINE__, tty->driver->name, info->count ); | |
3420 | ||
3421 | if (!retval) | |
3422 | info->flags |= ASYNC_NORMAL_ACTIVE; | |
3423 | ||
3424 | return retval; | |
3425 | } | |
3426 | ||
ce9f9f73 | 3427 | static int alloc_dma_bufs(SLMP_INFO *info) |
1da177e4 LT |
3428 | { |
3429 | unsigned short BuffersPerFrame; | |
3430 | unsigned short BufferCount; | |
3431 | ||
3432 | // Force allocation to start at 64K boundary for each port. | |
3433 | // This is necessary because *all* buffer descriptors for a port | |
3434 | // *must* be in the same 64K block. All descriptors on a port | |
3435 | // share a common 'base' address (upper 8 bits of 24 bits) programmed | |
3436 | // into the CBP register. | |
3437 | info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num; | |
3438 | ||
3439 | /* Calculate the number of DMA buffers necessary to hold the */ | |
3440 | /* largest allowable frame size. Note: If the max frame size is */ | |
3441 | /* not an even multiple of the DMA buffer size then we need to */ | |
3442 | /* round the buffer count per frame up one. */ | |
3443 | ||
3444 | BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE); | |
3445 | if ( info->max_frame_size % SCABUFSIZE ) | |
3446 | BuffersPerFrame++; | |
3447 | ||
3448 | /* calculate total number of data buffers (SCABUFSIZE) possible | |
3449 | * in one ports memory (SCA_MEM_SIZE/4) after allocating memory | |
3450 | * for the descriptor list (BUFFERLISTSIZE). | |
3451 | */ | |
3452 | BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE; | |
3453 | ||
3454 | /* limit number of buffers to maximum amount of descriptors */ | |
3455 | if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC)) | |
3456 | BufferCount = BUFFERLISTSIZE/sizeof(SCADESC); | |
3457 | ||
3458 | /* use enough buffers to transmit one max size frame */ | |
3459 | info->tx_buf_count = BuffersPerFrame + 1; | |
3460 | ||
3461 | /* never use more than half the available buffers for transmit */ | |
3462 | if (info->tx_buf_count > (BufferCount/2)) | |
3463 | info->tx_buf_count = BufferCount/2; | |
3464 | ||
3465 | if (info->tx_buf_count > SCAMAXDESC) | |
3466 | info->tx_buf_count = SCAMAXDESC; | |
3467 | ||
3468 | /* use remaining buffers for receive */ | |
3469 | info->rx_buf_count = BufferCount - info->tx_buf_count; | |
3470 | ||
3471 | if (info->rx_buf_count > SCAMAXDESC) | |
3472 | info->rx_buf_count = SCAMAXDESC; | |
3473 | ||
3474 | if ( debug_level >= DEBUG_LEVEL_INFO ) | |
3475 | printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n", | |
3476 | __FILE__,__LINE__, info->device_name, | |
3477 | info->tx_buf_count,info->rx_buf_count); | |
3478 | ||
3479 | if ( alloc_buf_list( info ) < 0 || | |
3480 | alloc_frame_bufs(info, | |
3481 | info->rx_buf_list, | |
3482 | info->rx_buf_list_ex, | |
3483 | info->rx_buf_count) < 0 || | |
3484 | alloc_frame_bufs(info, | |
3485 | info->tx_buf_list, | |
3486 | info->tx_buf_list_ex, | |
3487 | info->tx_buf_count) < 0 || | |
3488 | alloc_tmp_rx_buf(info) < 0 ) { | |
3489 | printk("%s(%d):%s Can't allocate DMA buffer memory\n", | |
3490 | __FILE__,__LINE__, info->device_name); | |
3491 | return -ENOMEM; | |
3492 | } | |
3493 | ||
3494 | rx_reset_buffers( info ); | |
3495 | ||
3496 | return 0; | |
3497 | } | |
3498 | ||
3499 | /* Allocate DMA buffers for the transmit and receive descriptor lists. | |
3500 | */ | |
ce9f9f73 | 3501 | static int alloc_buf_list(SLMP_INFO *info) |
1da177e4 LT |
3502 | { |
3503 | unsigned int i; | |
3504 | ||
3505 | /* build list in adapter shared memory */ | |
3506 | info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc; | |
3507 | info->buffer_list_phys = info->port_array[0]->last_mem_alloc; | |
3508 | info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE; | |
3509 | ||
3510 | memset(info->buffer_list, 0, BUFFERLISTSIZE); | |
3511 | ||
3512 | /* Save virtual address pointers to the receive and */ | |
3513 | /* transmit buffer lists. (Receive 1st). These pointers will */ | |
3514 | /* be used by the processor to access the lists. */ | |
3515 | info->rx_buf_list = (SCADESC *)info->buffer_list; | |
3516 | ||
3517 | info->tx_buf_list = (SCADESC *)info->buffer_list; | |
3518 | info->tx_buf_list += info->rx_buf_count; | |
3519 | ||
3520 | /* Build links for circular buffer entry lists (tx and rx) | |
3521 | * | |
3522 | * Note: links are physical addresses read by the SCA device | |
3523 | * to determine the next buffer entry to use. | |
3524 | */ | |
3525 | ||
3526 | for ( i = 0; i < info->rx_buf_count; i++ ) { | |
3527 | /* calculate and store physical address of this buffer entry */ | |
3528 | info->rx_buf_list_ex[i].phys_entry = | |
3529 | info->buffer_list_phys + (i * sizeof(SCABUFSIZE)); | |
3530 | ||
3531 | /* calculate and store physical address of */ | |
3532 | /* next entry in cirular list of entries */ | |
3533 | info->rx_buf_list[i].next = info->buffer_list_phys; | |
3534 | if ( i < info->rx_buf_count - 1 ) | |
3535 | info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC); | |
3536 | ||
3537 | info->rx_buf_list[i].length = SCABUFSIZE; | |
3538 | } | |
3539 | ||
3540 | for ( i = 0; i < info->tx_buf_count; i++ ) { | |
3541 | /* calculate and store physical address of this buffer entry */ | |
3542 | info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys + | |
3543 | ((info->rx_buf_count + i) * sizeof(SCADESC)); | |
3544 | ||
3545 | /* calculate and store physical address of */ | |
3546 | /* next entry in cirular list of entries */ | |
3547 | ||
3548 | info->tx_buf_list[i].next = info->buffer_list_phys + | |
3549 | info->rx_buf_count * sizeof(SCADESC); | |
3550 | ||
3551 | if ( i < info->tx_buf_count - 1 ) | |
3552 | info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC); | |
3553 | } | |
3554 | ||
3555 | return 0; | |
3556 | } | |
3557 | ||
3558 | /* Allocate the frame DMA buffers used by the specified buffer list. | |
3559 | */ | |
ce9f9f73 | 3560 | static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count) |
1da177e4 LT |
3561 | { |
3562 | int i; | |
3563 | unsigned long phys_addr; | |
3564 | ||
3565 | for ( i = 0; i < count; i++ ) { | |
3566 | buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc; | |
3567 | phys_addr = info->port_array[0]->last_mem_alloc; | |
3568 | info->port_array[0]->last_mem_alloc += SCABUFSIZE; | |
3569 | ||
3570 | buf_list[i].buf_ptr = (unsigned short)phys_addr; | |
3571 | buf_list[i].buf_base = (unsigned char)(phys_addr >> 16); | |
3572 | } | |
3573 | ||
3574 | return 0; | |
3575 | } | |
3576 | ||
ce9f9f73 | 3577 | static void free_dma_bufs(SLMP_INFO *info) |
1da177e4 LT |
3578 | { |
3579 | info->buffer_list = NULL; | |
3580 | info->rx_buf_list = NULL; | |
3581 | info->tx_buf_list = NULL; | |
3582 | } | |
3583 | ||
3584 | /* allocate buffer large enough to hold max_frame_size. | |
3585 | * This buffer is used to pass an assembled frame to the line discipline. | |
3586 | */ | |
ce9f9f73 | 3587 | static int alloc_tmp_rx_buf(SLMP_INFO *info) |
1da177e4 LT |
3588 | { |
3589 | info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); | |
3590 | if (info->tmp_rx_buf == NULL) | |
3591 | return -ENOMEM; | |
3592 | return 0; | |
3593 | } | |
3594 | ||
ce9f9f73 | 3595 | static void free_tmp_rx_buf(SLMP_INFO *info) |
1da177e4 | 3596 | { |
735d5661 | 3597 | kfree(info->tmp_rx_buf); |
1da177e4 LT |
3598 | info->tmp_rx_buf = NULL; |
3599 | } | |
3600 | ||
ce9f9f73 | 3601 | static int claim_resources(SLMP_INFO *info) |
1da177e4 LT |
3602 | { |
3603 | if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) { | |
3604 | printk( "%s(%d):%s mem addr conflict, Addr=%08X\n", | |
3605 | __FILE__,__LINE__,info->device_name, info->phys_memory_base); | |
3606 | info->init_error = DiagStatus_AddressConflict; | |
3607 | goto errout; | |
3608 | } | |
3609 | else | |
0fab6de0 | 3610 | info->shared_mem_requested = true; |
1da177e4 LT |
3611 | |
3612 | if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) { | |
3613 | printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n", | |
3614 | __FILE__,__LINE__,info->device_name, info->phys_lcr_base); | |
3615 | info->init_error = DiagStatus_AddressConflict; | |
3616 | goto errout; | |
3617 | } | |
3618 | else | |
0fab6de0 | 3619 | info->lcr_mem_requested = true; |
1da177e4 LT |
3620 | |
3621 | if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) { | |
3622 | printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n", | |
3623 | __FILE__,__LINE__,info->device_name, info->phys_sca_base); | |
3624 | info->init_error = DiagStatus_AddressConflict; | |
3625 | goto errout; | |
3626 | } | |
3627 | else | |
0fab6de0 | 3628 | info->sca_base_requested = true; |
1da177e4 LT |
3629 | |
3630 | if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) { | |
3631 | printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n", | |
3632 | __FILE__,__LINE__,info->device_name, info->phys_statctrl_base); | |
3633 | info->init_error = DiagStatus_AddressConflict; | |
3634 | goto errout; | |
3635 | } | |
3636 | else | |
0fab6de0 | 3637 | info->sca_statctrl_requested = true; |
1da177e4 LT |
3638 | |
3639 | info->memory_base = ioremap(info->phys_memory_base,SCA_MEM_SIZE); | |
3640 | if (!info->memory_base) { | |
3641 | printk( "%s(%d):%s Cant map shared memory, MemAddr=%08X\n", | |
3642 | __FILE__,__LINE__,info->device_name, info->phys_memory_base ); | |
3643 | info->init_error = DiagStatus_CantAssignPciResources; | |
3644 | goto errout; | |
3645 | } | |
3646 | ||
3647 | info->lcr_base = ioremap(info->phys_lcr_base,PAGE_SIZE); | |
3648 | if (!info->lcr_base) { | |
3649 | printk( "%s(%d):%s Cant map LCR memory, MemAddr=%08X\n", | |
3650 | __FILE__,__LINE__,info->device_name, info->phys_lcr_base ); | |
3651 | info->init_error = DiagStatus_CantAssignPciResources; | |
3652 | goto errout; | |
3653 | } | |
3654 | info->lcr_base += info->lcr_offset; | |
3655 | ||
3656 | info->sca_base = ioremap(info->phys_sca_base,PAGE_SIZE); | |
3657 | if (!info->sca_base) { | |
3658 | printk( "%s(%d):%s Cant map SCA memory, MemAddr=%08X\n", | |
3659 | __FILE__,__LINE__,info->device_name, info->phys_sca_base ); | |
3660 | info->init_error = DiagStatus_CantAssignPciResources; | |
3661 | goto errout; | |
3662 | } | |
3663 | info->sca_base += info->sca_offset; | |
3664 | ||
3665 | info->statctrl_base = ioremap(info->phys_statctrl_base,PAGE_SIZE); | |
3666 | if (!info->statctrl_base) { | |
3667 | printk( "%s(%d):%s Cant map SCA Status/Control memory, MemAddr=%08X\n", | |
3668 | __FILE__,__LINE__,info->device_name, info->phys_statctrl_base ); | |
3669 | info->init_error = DiagStatus_CantAssignPciResources; | |
3670 | goto errout; | |
3671 | } | |
3672 | info->statctrl_base += info->statctrl_offset; | |
3673 | ||
3674 | if ( !memory_test(info) ) { | |
3675 | printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n", | |
3676 | __FILE__,__LINE__,info->device_name, info->phys_memory_base ); | |
3677 | info->init_error = DiagStatus_MemoryError; | |
3678 | goto errout; | |
3679 | } | |
3680 | ||
3681 | return 0; | |
3682 | ||
3683 | errout: | |
3684 | release_resources( info ); | |
3685 | return -ENODEV; | |
3686 | } | |
3687 | ||
ce9f9f73 | 3688 | static void release_resources(SLMP_INFO *info) |
1da177e4 LT |
3689 | { |
3690 | if ( debug_level >= DEBUG_LEVEL_INFO ) | |
3691 | printk( "%s(%d):%s release_resources() entry\n", | |
3692 | __FILE__,__LINE__,info->device_name ); | |
3693 | ||
3694 | if ( info->irq_requested ) { | |
3695 | free_irq(info->irq_level, info); | |
0fab6de0 | 3696 | info->irq_requested = false; |
1da177e4 LT |
3697 | } |
3698 | ||
3699 | if ( info->shared_mem_requested ) { | |
3700 | release_mem_region(info->phys_memory_base,SCA_MEM_SIZE); | |
0fab6de0 | 3701 | info->shared_mem_requested = false; |
1da177e4 LT |
3702 | } |
3703 | if ( info->lcr_mem_requested ) { | |
3704 | release_mem_region(info->phys_lcr_base + info->lcr_offset,128); | |
0fab6de0 | 3705 | info->lcr_mem_requested = false; |
1da177e4 LT |
3706 | } |
3707 | if ( info->sca_base_requested ) { | |
3708 | release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE); | |
0fab6de0 | 3709 | info->sca_base_requested = false; |
1da177e4 LT |
3710 | } |
3711 | if ( info->sca_statctrl_requested ) { | |
3712 | release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE); | |
0fab6de0 | 3713 | info->sca_statctrl_requested = false; |
1da177e4 LT |
3714 | } |
3715 | ||
3716 | if (info->memory_base){ | |
3717 | iounmap(info->memory_base); | |
3718 | info->memory_base = NULL; | |
3719 | } | |
3720 | ||
3721 | if (info->sca_base) { | |
3722 | iounmap(info->sca_base - info->sca_offset); | |
3723 | info->sca_base=NULL; | |
3724 | } | |
3725 | ||
3726 | if (info->statctrl_base) { | |
3727 | iounmap(info->statctrl_base - info->statctrl_offset); | |
3728 | info->statctrl_base=NULL; | |
3729 | } | |
3730 | ||
3731 | if (info->lcr_base){ | |
3732 | iounmap(info->lcr_base - info->lcr_offset); | |
3733 | info->lcr_base = NULL; | |
3734 | } | |
3735 | ||
3736 | if ( debug_level >= DEBUG_LEVEL_INFO ) | |
3737 | printk( "%s(%d):%s release_resources() exit\n", | |
3738 | __FILE__,__LINE__,info->device_name ); | |
3739 | } | |
3740 | ||
3741 | /* Add the specified device instance data structure to the | |
3742 | * global linked list of devices and increment the device count. | |
3743 | */ | |
ce9f9f73 | 3744 | static void add_device(SLMP_INFO *info) |
1da177e4 LT |
3745 | { |
3746 | info->next_device = NULL; | |
3747 | info->line = synclinkmp_device_count; | |
3748 | sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num); | |
3749 | ||
3750 | if (info->line < MAX_DEVICES) { | |
3751 | if (maxframe[info->line]) | |
3752 | info->max_frame_size = maxframe[info->line]; | |
3753 | info->dosyncppp = dosyncppp[info->line]; | |
3754 | } | |
3755 | ||
3756 | synclinkmp_device_count++; | |
3757 | ||
3758 | if ( !synclinkmp_device_list ) | |
3759 | synclinkmp_device_list = info; | |
3760 | else { | |
3761 | SLMP_INFO *current_dev = synclinkmp_device_list; | |
3762 | while( current_dev->next_device ) | |
3763 | current_dev = current_dev->next_device; | |
3764 | current_dev->next_device = info; | |
3765 | } | |
3766 | ||
3767 | if ( info->max_frame_size < 4096 ) | |
3768 | info->max_frame_size = 4096; | |
3769 | else if ( info->max_frame_size > 65535 ) | |
3770 | info->max_frame_size = 65535; | |
3771 | ||
3772 | printk( "SyncLink MultiPort %s: " | |
3773 | "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n", | |
3774 | info->device_name, | |
3775 | info->phys_sca_base, | |
3776 | info->phys_memory_base, | |
3777 | info->phys_statctrl_base, | |
3778 | info->phys_lcr_base, | |
3779 | info->irq_level, | |
3780 | info->max_frame_size ); | |
3781 | ||
af69c7f9 | 3782 | #if SYNCLINK_GENERIC_HDLC |
1da177e4 LT |
3783 | hdlcdev_init(info); |
3784 | #endif | |
3785 | } | |
3786 | ||
3787 | /* Allocate and initialize a device instance structure | |
3788 | * | |
3789 | * Return Value: pointer to SLMP_INFO if success, otherwise NULL | |
3790 | */ | |
3791 | static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev) | |
3792 | { | |
3793 | SLMP_INFO *info; | |
3794 | ||
dd00cc48 | 3795 | info = kzalloc(sizeof(SLMP_INFO), |
1da177e4 LT |
3796 | GFP_KERNEL); |
3797 | ||
3798 | if (!info) { | |
3799 | printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n", | |
3800 | __FILE__,__LINE__, adapter_num, port_num); | |
3801 | } else { | |
1da177e4 | 3802 | info->magic = MGSL_MAGIC; |
c4028958 | 3803 | INIT_WORK(&info->task, bh_handler); |
1da177e4 LT |
3804 | info->max_frame_size = 4096; |
3805 | info->close_delay = 5*HZ/10; | |
3806 | info->closing_wait = 30*HZ; | |
3807 | init_waitqueue_head(&info->open_wait); | |
3808 | init_waitqueue_head(&info->close_wait); | |
3809 | init_waitqueue_head(&info->status_event_wait_q); | |
3810 | init_waitqueue_head(&info->event_wait_q); | |
3811 | spin_lock_init(&info->netlock); | |
3812 | memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); | |
3813 | info->idle_mode = HDLC_TXIDLE_FLAGS; | |
3814 | info->adapter_num = adapter_num; | |
3815 | info->port_num = port_num; | |
3816 | ||
3817 | /* Copy configuration info to device instance data */ | |
3818 | info->irq_level = pdev->irq; | |
3819 | info->phys_lcr_base = pci_resource_start(pdev,0); | |
3820 | info->phys_sca_base = pci_resource_start(pdev,2); | |
3821 | info->phys_memory_base = pci_resource_start(pdev,3); | |
3822 | info->phys_statctrl_base = pci_resource_start(pdev,4); | |
3823 | ||
3824 | /* Because veremap only works on page boundaries we must map | |
3825 | * a larger area than is actually implemented for the LCR | |
3826 | * memory range. We map a full page starting at the page boundary. | |
3827 | */ | |
3828 | info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1); | |
3829 | info->phys_lcr_base &= ~(PAGE_SIZE-1); | |
3830 | ||
3831 | info->sca_offset = info->phys_sca_base & (PAGE_SIZE-1); | |
3832 | info->phys_sca_base &= ~(PAGE_SIZE-1); | |
3833 | ||
3834 | info->statctrl_offset = info->phys_statctrl_base & (PAGE_SIZE-1); | |
3835 | info->phys_statctrl_base &= ~(PAGE_SIZE-1); | |
3836 | ||
3837 | info->bus_type = MGSL_BUS_TYPE_PCI; | |
0f2ed4c6 | 3838 | info->irq_flags = IRQF_SHARED; |
1da177e4 | 3839 | |
40565f19 JS |
3840 | setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info); |
3841 | setup_timer(&info->status_timer, status_timeout, | |
3842 | (unsigned long)info); | |
1da177e4 LT |
3843 | |
3844 | /* Store the PCI9050 misc control register value because a flaw | |
3845 | * in the PCI9050 prevents LCR registers from being read if | |
3846 | * BIOS assigns an LCR base address with bit 7 set. | |
3847 | * | |
3848 | * Only the misc control register is accessed for which only | |
3849 | * write access is needed, so set an initial value and change | |
3850 | * bits to the device instance data as we write the value | |
3851 | * to the actual misc control register. | |
3852 | */ | |
3853 | info->misc_ctrl_value = 0x087e4546; | |
3854 | ||
3855 | /* initial port state is unknown - if startup errors | |
3856 | * occur, init_error will be set to indicate the | |
3857 | * problem. Once the port is fully initialized, | |
3858 | * this value will be set to 0 to indicate the | |
3859 | * port is available. | |
3860 | */ | |
3861 | info->init_error = -1; | |
3862 | } | |
3863 | ||
3864 | return info; | |
3865 | } | |
3866 | ||
ce9f9f73 | 3867 | static void device_init(int adapter_num, struct pci_dev *pdev) |
1da177e4 LT |
3868 | { |
3869 | SLMP_INFO *port_array[SCA_MAX_PORTS]; | |
3870 | int port; | |
3871 | ||
3872 | /* allocate device instances for up to SCA_MAX_PORTS devices */ | |
3873 | for ( port = 0; port < SCA_MAX_PORTS; ++port ) { | |
3874 | port_array[port] = alloc_dev(adapter_num,port,pdev); | |
3875 | if( port_array[port] == NULL ) { | |
3876 | for ( --port; port >= 0; --port ) | |
3877 | kfree(port_array[port]); | |
3878 | return; | |
3879 | } | |
3880 | } | |
3881 | ||
3882 | /* give copy of port_array to all ports and add to device list */ | |
3883 | for ( port = 0; port < SCA_MAX_PORTS; ++port ) { | |
3884 | memcpy(port_array[port]->port_array,port_array,sizeof(port_array)); | |
3885 | add_device( port_array[port] ); | |
3886 | spin_lock_init(&port_array[port]->lock); | |
3887 | } | |
3888 | ||
3889 | /* Allocate and claim adapter resources */ | |
3890 | if ( !claim_resources(port_array[0]) ) { | |
3891 | ||
3892 | alloc_dma_bufs(port_array[0]); | |
3893 | ||
3894 | /* copy resource information from first port to others */ | |
3895 | for ( port = 1; port < SCA_MAX_PORTS; ++port ) { | |
3896 | port_array[port]->lock = port_array[0]->lock; | |
3897 | port_array[port]->irq_level = port_array[0]->irq_level; | |
3898 | port_array[port]->memory_base = port_array[0]->memory_base; | |
3899 | port_array[port]->sca_base = port_array[0]->sca_base; | |
3900 | port_array[port]->statctrl_base = port_array[0]->statctrl_base; | |
3901 | port_array[port]->lcr_base = port_array[0]->lcr_base; | |
3902 | alloc_dma_bufs(port_array[port]); | |
3903 | } | |
3904 | ||
3905 | if ( request_irq(port_array[0]->irq_level, | |
3906 | synclinkmp_interrupt, | |
3907 | port_array[0]->irq_flags, | |
3908 | port_array[0]->device_name, | |
3909 | port_array[0]) < 0 ) { | |
3910 | printk( "%s(%d):%s Cant request interrupt, IRQ=%d\n", | |
3911 | __FILE__,__LINE__, | |
3912 | port_array[0]->device_name, | |
3913 | port_array[0]->irq_level ); | |
3914 | } | |
3915 | else { | |
0fab6de0 | 3916 | port_array[0]->irq_requested = true; |
1da177e4 LT |
3917 | adapter_test(port_array[0]); |
3918 | } | |
3919 | } | |
3920 | } | |
3921 | ||
b68e31d0 | 3922 | static const struct tty_operations ops = { |
1da177e4 LT |
3923 | .open = open, |
3924 | .close = close, | |
3925 | .write = write, | |
3926 | .put_char = put_char, | |
3927 | .flush_chars = flush_chars, | |
3928 | .write_room = write_room, | |
3929 | .chars_in_buffer = chars_in_buffer, | |
3930 | .flush_buffer = flush_buffer, | |
3931 | .ioctl = ioctl, | |
3932 | .throttle = throttle, | |
3933 | .unthrottle = unthrottle, | |
3934 | .send_xchar = send_xchar, | |
3935 | .break_ctl = set_break, | |
3936 | .wait_until_sent = wait_until_sent, | |
3937 | .read_proc = read_proc, | |
3938 | .set_termios = set_termios, | |
3939 | .stop = tx_hold, | |
3940 | .start = tx_release, | |
3941 | .hangup = hangup, | |
3942 | .tiocmget = tiocmget, | |
3943 | .tiocmset = tiocmset, | |
3944 | }; | |
3945 | ||
3946 | static void synclinkmp_cleanup(void) | |
3947 | { | |
3948 | int rc; | |
3949 | SLMP_INFO *info; | |
3950 | SLMP_INFO *tmp; | |
3951 | ||
3952 | printk("Unloading %s %s\n", driver_name, driver_version); | |
3953 | ||
3954 | if (serial_driver) { | |
3955 | if ((rc = tty_unregister_driver(serial_driver))) | |
3956 | printk("%s(%d) failed to unregister tty driver err=%d\n", | |
3957 | __FILE__,__LINE__,rc); | |
3958 | put_tty_driver(serial_driver); | |
3959 | } | |
3960 | ||
3961 | /* reset devices */ | |
3962 | info = synclinkmp_device_list; | |
3963 | while(info) { | |
3964 | reset_port(info); | |
3965 | info = info->next_device; | |
3966 | } | |
3967 | ||
3968 | /* release devices */ | |
3969 | info = synclinkmp_device_list; | |
3970 | while(info) { | |
af69c7f9 | 3971 | #if SYNCLINK_GENERIC_HDLC |
1da177e4 LT |
3972 | hdlcdev_exit(info); |
3973 | #endif | |
3974 | free_dma_bufs(info); | |
3975 | free_tmp_rx_buf(info); | |
3976 | if ( info->port_num == 0 ) { | |
3977 | if (info->sca_base) | |
3978 | write_reg(info, LPR, 1); /* set low power mode */ | |
3979 | release_resources(info); | |
3980 | } | |
3981 | tmp = info; | |
3982 | info = info->next_device; | |
3983 | kfree(tmp); | |
3984 | } | |
3985 | ||
3986 | pci_unregister_driver(&synclinkmp_pci_driver); | |
3987 | } | |
3988 | ||
3989 | /* Driver initialization entry point. | |
3990 | */ | |
3991 | ||
3992 | static int __init synclinkmp_init(void) | |
3993 | { | |
3994 | int rc; | |
3995 | ||
3996 | if (break_on_load) { | |
3997 | synclinkmp_get_text_ptr(); | |
3998 | BREAKPOINT(); | |
3999 | } | |
4000 | ||
4001 | printk("%s %s\n", driver_name, driver_version); | |
4002 | ||
4003 | if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) { | |
4004 | printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc); | |
4005 | return rc; | |
4006 | } | |
4007 | ||
4008 | serial_driver = alloc_tty_driver(128); | |
4009 | if (!serial_driver) { | |
4010 | rc = -ENOMEM; | |
4011 | goto error; | |
4012 | } | |
4013 | ||
4014 | /* Initialize the tty_driver structure */ | |
4015 | ||
4016 | serial_driver->owner = THIS_MODULE; | |
4017 | serial_driver->driver_name = "synclinkmp"; | |
4018 | serial_driver->name = "ttySLM"; | |
4019 | serial_driver->major = ttymajor; | |
4020 | serial_driver->minor_start = 64; | |
4021 | serial_driver->type = TTY_DRIVER_TYPE_SERIAL; | |
4022 | serial_driver->subtype = SERIAL_TYPE_NORMAL; | |
4023 | serial_driver->init_termios = tty_std_termios; | |
4024 | serial_driver->init_termios.c_cflag = | |
4025 | B9600 | CS8 | CREAD | HUPCL | CLOCAL; | |
606d099c AC |
4026 | serial_driver->init_termios.c_ispeed = 9600; |
4027 | serial_driver->init_termios.c_ospeed = 9600; | |
1da177e4 LT |
4028 | serial_driver->flags = TTY_DRIVER_REAL_RAW; |
4029 | tty_set_operations(serial_driver, &ops); | |
4030 | if ((rc = tty_register_driver(serial_driver)) < 0) { | |
4031 | printk("%s(%d):Couldn't register serial driver\n", | |
4032 | __FILE__,__LINE__); | |
4033 | put_tty_driver(serial_driver); | |
4034 | serial_driver = NULL; | |
4035 | goto error; | |
4036 | } | |
4037 | ||
4038 | printk("%s %s, tty major#%d\n", | |
4039 | driver_name, driver_version, | |
4040 | serial_driver->major); | |
4041 | ||
4042 | return 0; | |
4043 | ||
4044 | error: | |
4045 | synclinkmp_cleanup(); | |
4046 | return rc; | |
4047 | } | |
4048 | ||
4049 | static void __exit synclinkmp_exit(void) | |
4050 | { | |
4051 | synclinkmp_cleanup(); | |
4052 | } | |
4053 | ||
4054 | module_init(synclinkmp_init); | |
4055 | module_exit(synclinkmp_exit); | |
4056 | ||
4057 | /* Set the port for internal loopback mode. | |
4058 | * The TxCLK and RxCLK signals are generated from the BRG and | |
4059 | * the TxD is looped back to the RxD internally. | |
4060 | */ | |
ce9f9f73 | 4061 | static void enable_loopback(SLMP_INFO *info, int enable) |
1da177e4 LT |
4062 | { |
4063 | if (enable) { | |
4064 | /* MD2 (Mode Register 2) | |
4065 | * 01..00 CNCT<1..0> Channel Connection 11=Local Loopback | |
4066 | */ | |
4067 | write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0))); | |
4068 | ||
4069 | /* degate external TxC clock source */ | |
4070 | info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); | |
4071 | write_control_reg(info); | |
4072 | ||
4073 | /* RXS/TXS (Rx/Tx clock source) | |
4074 | * 07 Reserved, must be 0 | |
4075 | * 06..04 Clock Source, 100=BRG | |
4076 | * 03..00 Clock Divisor, 0000=1 | |
4077 | */ | |
4078 | write_reg(info, RXS, 0x40); | |
4079 | write_reg(info, TXS, 0x40); | |
4080 | ||
4081 | } else { | |
4082 | /* MD2 (Mode Register 2) | |
4083 | * 01..00 CNCT<1..0> Channel connection, 0=normal | |
4084 | */ | |
4085 | write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0))); | |
4086 | ||
4087 | /* RXS/TXS (Rx/Tx clock source) | |
4088 | * 07 Reserved, must be 0 | |
4089 | * 06..04 Clock Source, 000=RxC/TxC Pin | |
4090 | * 03..00 Clock Divisor, 0000=1 | |
4091 | */ | |
4092 | write_reg(info, RXS, 0x00); | |
4093 | write_reg(info, TXS, 0x00); | |
4094 | } | |
4095 | ||
4096 | /* set LinkSpeed if available, otherwise default to 2Mbps */ | |
4097 | if (info->params.clock_speed) | |
4098 | set_rate(info, info->params.clock_speed); | |
4099 | else | |
4100 | set_rate(info, 3686400); | |
4101 | } | |
4102 | ||
4103 | /* Set the baud rate register to the desired speed | |
4104 | * | |
4105 | * data_rate data rate of clock in bits per second | |
4106 | * A data rate of 0 disables the AUX clock. | |
4107 | */ | |
ce9f9f73 | 4108 | static void set_rate( SLMP_INFO *info, u32 data_rate ) |
1da177e4 LT |
4109 | { |
4110 | u32 TMCValue; | |
4111 | unsigned char BRValue; | |
4112 | u32 Divisor=0; | |
4113 | ||
4114 | /* fBRG = fCLK/(TMC * 2^BR) | |
4115 | */ | |
4116 | if (data_rate != 0) { | |
4117 | Divisor = 14745600/data_rate; | |
4118 | if (!Divisor) | |
4119 | Divisor = 1; | |
4120 | ||
4121 | TMCValue = Divisor; | |
4122 | ||
4123 | BRValue = 0; | |
4124 | if (TMCValue != 1 && TMCValue != 2) { | |
4125 | /* BRValue of 0 provides 50/50 duty cycle *only* when | |
4126 | * TMCValue is 1 or 2. BRValue of 1 to 9 always provides | |
4127 | * 50/50 duty cycle. | |
4128 | */ | |
4129 | BRValue = 1; | |
4130 | TMCValue >>= 1; | |
4131 | } | |
4132 | ||
4133 | /* while TMCValue is too big for TMC register, divide | |
4134 | * by 2 and increment BR exponent. | |
4135 | */ | |
4136 | for(; TMCValue > 256 && BRValue < 10; BRValue++) | |
4137 | TMCValue >>= 1; | |
4138 | ||
4139 | write_reg(info, TXS, | |
4140 | (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue)); | |
4141 | write_reg(info, RXS, | |
4142 | (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue)); | |
4143 | write_reg(info, TMC, (unsigned char)TMCValue); | |
4144 | } | |
4145 | else { | |
4146 | write_reg(info, TXS,0); | |
4147 | write_reg(info, RXS,0); | |
4148 | write_reg(info, TMC, 0); | |
4149 | } | |
4150 | } | |
4151 | ||
4152 | /* Disable receiver | |
4153 | */ | |
ce9f9f73 | 4154 | static void rx_stop(SLMP_INFO *info) |
1da177e4 LT |
4155 | { |
4156 | if (debug_level >= DEBUG_LEVEL_ISR) | |
4157 | printk("%s(%d):%s rx_stop()\n", | |
4158 | __FILE__,__LINE__, info->device_name ); | |
4159 | ||
4160 | write_reg(info, CMD, RXRESET); | |
4161 | ||
4162 | info->ie0_value &= ~RXRDYE; | |
4163 | write_reg(info, IE0, info->ie0_value); /* disable Rx data interrupts */ | |
4164 | ||
4165 | write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */ | |
4166 | write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */ | |
4167 | write_reg(info, RXDMA + DIR, 0); /* disable Rx DMA interrupts */ | |
4168 | ||
0fab6de0 JP |
4169 | info->rx_enabled = false; |
4170 | info->rx_overflow = false; | |
1da177e4 LT |
4171 | } |
4172 | ||
4173 | /* enable the receiver | |
4174 | */ | |
ce9f9f73 | 4175 | static void rx_start(SLMP_INFO *info) |
1da177e4 LT |
4176 | { |
4177 | int i; | |
4178 | ||
4179 | if (debug_level >= DEBUG_LEVEL_ISR) | |
4180 | printk("%s(%d):%s rx_start()\n", | |
4181 | __FILE__,__LINE__, info->device_name ); | |
4182 | ||
4183 | write_reg(info, CMD, RXRESET); | |
4184 | ||
4185 | if ( info->params.mode == MGSL_MODE_HDLC ) { | |
4186 | /* HDLC, disabe IRQ on rxdata */ | |
4187 | info->ie0_value &= ~RXRDYE; | |
4188 | write_reg(info, IE0, info->ie0_value); | |
4189 | ||
4190 | /* Reset all Rx DMA buffers and program rx dma */ | |
4191 | write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */ | |
4192 | write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */ | |
4193 | ||
4194 | for (i = 0; i < info->rx_buf_count; i++) { | |
4195 | info->rx_buf_list[i].status = 0xff; | |
4196 | ||
4197 | // throttle to 4 shared memory writes at a time to prevent | |
4198 | // hogging local bus (keep latency time for DMA requests low). | |
4199 | if (!(i % 4)) | |
4200 | read_status_reg(info); | |
4201 | } | |
4202 | info->current_rx_buf = 0; | |
4203 | ||
4204 | /* set current/1st descriptor address */ | |
4205 | write_reg16(info, RXDMA + CDA, | |
4206 | info->rx_buf_list_ex[0].phys_entry); | |
4207 | ||
4208 | /* set new last rx descriptor address */ | |
4209 | write_reg16(info, RXDMA + EDA, | |
4210 | info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry); | |
4211 | ||
4212 | /* set buffer length (shared by all rx dma data buffers) */ | |
4213 | write_reg16(info, RXDMA + BFL, SCABUFSIZE); | |
4214 | ||
4215 | write_reg(info, RXDMA + DIR, 0x60); /* enable Rx DMA interrupts (EOM/BOF) */ | |
4216 | write_reg(info, RXDMA + DSR, 0xf2); /* clear Rx DMA IRQs, enable Rx DMA */ | |
4217 | } else { | |
4218 | /* async, enable IRQ on rxdata */ | |
4219 | info->ie0_value |= RXRDYE; | |
4220 | write_reg(info, IE0, info->ie0_value); | |
4221 | } | |
4222 | ||
4223 | write_reg(info, CMD, RXENABLE); | |
4224 | ||
0fab6de0 JP |
4225 | info->rx_overflow = false; |
4226 | info->rx_enabled = true; | |
1da177e4 LT |
4227 | } |
4228 | ||
4229 | /* Enable the transmitter and send a transmit frame if | |
4230 | * one is loaded in the DMA buffers. | |
4231 | */ | |
ce9f9f73 | 4232 | static void tx_start(SLMP_INFO *info) |
1da177e4 LT |
4233 | { |
4234 | if (debug_level >= DEBUG_LEVEL_ISR) | |
4235 | printk("%s(%d):%s tx_start() tx_count=%d\n", | |
4236 | __FILE__,__LINE__, info->device_name,info->tx_count ); | |
4237 | ||
4238 | if (!info->tx_enabled ) { | |
4239 | write_reg(info, CMD, TXRESET); | |
4240 | write_reg(info, CMD, TXENABLE); | |
0fab6de0 | 4241 | info->tx_enabled = true; |
1da177e4 LT |
4242 | } |
4243 | ||
4244 | if ( info->tx_count ) { | |
4245 | ||
4246 | /* If auto RTS enabled and RTS is inactive, then assert */ | |
4247 | /* RTS and set a flag indicating that the driver should */ | |
4248 | /* negate RTS when the transmission completes. */ | |
4249 | ||
0fab6de0 | 4250 | info->drop_rts_on_tx_done = false; |
1da177e4 LT |
4251 | |
4252 | if (info->params.mode != MGSL_MODE_ASYNC) { | |
4253 | ||
4254 | if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) { | |
4255 | get_signals( info ); | |
4256 | if ( !(info->serial_signals & SerialSignal_RTS) ) { | |
4257 | info->serial_signals |= SerialSignal_RTS; | |
4258 | set_signals( info ); | |
0fab6de0 | 4259 | info->drop_rts_on_tx_done = true; |
1da177e4 LT |
4260 | } |
4261 | } | |
4262 | ||
4263 | write_reg16(info, TRC0, | |
4264 | (unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level)); | |
4265 | ||
4266 | write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ | |
4267 | write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ | |
4268 | ||
4269 | /* set TX CDA (current descriptor address) */ | |
4270 | write_reg16(info, TXDMA + CDA, | |
4271 | info->tx_buf_list_ex[0].phys_entry); | |
4272 | ||
4273 | /* set TX EDA (last descriptor address) */ | |
4274 | write_reg16(info, TXDMA + EDA, | |
4275 | info->tx_buf_list_ex[info->last_tx_buf].phys_entry); | |
4276 | ||
4277 | /* enable underrun IRQ */ | |
4278 | info->ie1_value &= ~IDLE; | |
4279 | info->ie1_value |= UDRN; | |
4280 | write_reg(info, IE1, info->ie1_value); | |
4281 | write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); | |
4282 | ||
4283 | write_reg(info, TXDMA + DIR, 0x40); /* enable Tx DMA interrupts (EOM) */ | |
4284 | write_reg(info, TXDMA + DSR, 0xf2); /* clear Tx DMA IRQs, enable Tx DMA */ | |
4285 | ||
40565f19 JS |
4286 | mod_timer(&info->tx_timer, jiffies + |
4287 | msecs_to_jiffies(5000)); | |
1da177e4 LT |
4288 | } |
4289 | else { | |
4290 | tx_load_fifo(info); | |
4291 | /* async, enable IRQ on txdata */ | |
4292 | info->ie0_value |= TXRDYE; | |
4293 | write_reg(info, IE0, info->ie0_value); | |
4294 | } | |
4295 | ||
0fab6de0 | 4296 | info->tx_active = true; |
1da177e4 LT |
4297 | } |
4298 | } | |
4299 | ||
4300 | /* stop the transmitter and DMA | |
4301 | */ | |
ce9f9f73 | 4302 | static void tx_stop( SLMP_INFO *info ) |
1da177e4 LT |
4303 | { |
4304 | if (debug_level >= DEBUG_LEVEL_ISR) | |
4305 | printk("%s(%d):%s tx_stop()\n", | |
4306 | __FILE__,__LINE__, info->device_name ); | |
4307 | ||
4308 | del_timer(&info->tx_timer); | |
4309 | ||
4310 | write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ | |
4311 | write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ | |
4312 | ||
4313 | write_reg(info, CMD, TXRESET); | |
4314 | ||
4315 | info->ie1_value &= ~(UDRN + IDLE); | |
4316 | write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */ | |
4317 | write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */ | |
4318 | ||
4319 | info->ie0_value &= ~TXRDYE; | |
4320 | write_reg(info, IE0, info->ie0_value); /* disable tx data interrupts */ | |
4321 | ||
0fab6de0 JP |
4322 | info->tx_enabled = false; |
4323 | info->tx_active = false; | |
1da177e4 LT |
4324 | } |
4325 | ||
4326 | /* Fill the transmit FIFO until the FIFO is full or | |
4327 | * there is no more data to load. | |
4328 | */ | |
ce9f9f73 | 4329 | static void tx_load_fifo(SLMP_INFO *info) |
1da177e4 LT |
4330 | { |
4331 | u8 TwoBytes[2]; | |
4332 | ||
4333 | /* do nothing is now tx data available and no XON/XOFF pending */ | |
4334 | ||
4335 | if ( !info->tx_count && !info->x_char ) | |
4336 | return; | |
4337 | ||
4338 | /* load the Transmit FIFO until FIFOs full or all data sent */ | |
4339 | ||
4340 | while( info->tx_count && (read_reg(info,SR0) & BIT1) ) { | |
4341 | ||
4342 | /* there is more space in the transmit FIFO and */ | |
4343 | /* there is more data in transmit buffer */ | |
4344 | ||
4345 | if ( (info->tx_count > 1) && !info->x_char ) { | |
4346 | /* write 16-bits */ | |
4347 | TwoBytes[0] = info->tx_buf[info->tx_get++]; | |
4348 | if (info->tx_get >= info->max_frame_size) | |
4349 | info->tx_get -= info->max_frame_size; | |
4350 | TwoBytes[1] = info->tx_buf[info->tx_get++]; | |
4351 | if (info->tx_get >= info->max_frame_size) | |
4352 | info->tx_get -= info->max_frame_size; | |
4353 | ||
4354 | write_reg16(info, TRB, *((u16 *)TwoBytes)); | |
4355 | ||
4356 | info->tx_count -= 2; | |
4357 | info->icount.tx += 2; | |
4358 | } else { | |
4359 | /* only 1 byte left to transmit or 1 FIFO slot left */ | |
4360 | ||
4361 | if (info->x_char) { | |
4362 | /* transmit pending high priority char */ | |
4363 | write_reg(info, TRB, info->x_char); | |
4364 | info->x_char = 0; | |
4365 | } else { | |
4366 | write_reg(info, TRB, info->tx_buf[info->tx_get++]); | |
4367 | if (info->tx_get >= info->max_frame_size) | |
4368 | info->tx_get -= info->max_frame_size; | |
4369 | info->tx_count--; | |
4370 | } | |
4371 | info->icount.tx++; | |
4372 | } | |
4373 | } | |
4374 | } | |
4375 | ||
4376 | /* Reset a port to a known state | |
4377 | */ | |
ce9f9f73 | 4378 | static void reset_port(SLMP_INFO *info) |
1da177e4 LT |
4379 | { |
4380 | if (info->sca_base) { | |
4381 | ||
4382 | tx_stop(info); | |
4383 | rx_stop(info); | |
4384 | ||
4385 | info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); | |
4386 | set_signals(info); | |
4387 | ||
4388 | /* disable all port interrupts */ | |
4389 | info->ie0_value = 0; | |
4390 | info->ie1_value = 0; | |
4391 | info->ie2_value = 0; | |
4392 | write_reg(info, IE0, info->ie0_value); | |
4393 | write_reg(info, IE1, info->ie1_value); | |
4394 | write_reg(info, IE2, info->ie2_value); | |
4395 | ||
4396 | write_reg(info, CMD, CHRESET); | |
4397 | } | |
4398 | } | |
4399 | ||
4400 | /* Reset all the ports to a known state. | |
4401 | */ | |
ce9f9f73 | 4402 | static void reset_adapter(SLMP_INFO *info) |
1da177e4 LT |
4403 | { |
4404 | int i; | |
4405 | ||
4406 | for ( i=0; i < SCA_MAX_PORTS; ++i) { | |
4407 | if (info->port_array[i]) | |
4408 | reset_port(info->port_array[i]); | |
4409 | } | |
4410 | } | |
4411 | ||
4412 | /* Program port for asynchronous communications. | |
4413 | */ | |
ce9f9f73 | 4414 | static void async_mode(SLMP_INFO *info) |
1da177e4 LT |
4415 | { |
4416 | ||
4417 | unsigned char RegValue; | |
4418 | ||
4419 | tx_stop(info); | |
4420 | rx_stop(info); | |
4421 | ||
4422 | /* MD0, Mode Register 0 | |
4423 | * | |
4424 | * 07..05 PRCTL<2..0>, Protocol Mode, 000=async | |
4425 | * 04 AUTO, Auto-enable (RTS/CTS/DCD) | |
4426 | * 03 Reserved, must be 0 | |
4427 | * 02 CRCCC, CRC Calculation, 0=disabled | |
4428 | * 01..00 STOP<1..0> Stop bits (00=1,10=2) | |
4429 | * | |
4430 | * 0000 0000 | |
4431 | */ | |
4432 | RegValue = 0x00; | |
4433 | if (info->params.stop_bits != 1) | |
4434 | RegValue |= BIT1; | |
4435 | write_reg(info, MD0, RegValue); | |
4436 | ||
4437 | /* MD1, Mode Register 1 | |
4438 | * | |
4439 | * 07..06 BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64 | |
4440 | * 05..04 TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5 | |
4441 | * 03..02 RXCHR<1..0>, rx char size | |
4442 | * 01..00 PMPM<1..0>, Parity mode, 00=none 10=even 11=odd | |
4443 | * | |
4444 | * 0100 0000 | |
4445 | */ | |
4446 | RegValue = 0x40; | |
4447 | switch (info->params.data_bits) { | |
4448 | case 7: RegValue |= BIT4 + BIT2; break; | |
4449 | case 6: RegValue |= BIT5 + BIT3; break; | |
4450 | case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break; | |
4451 | } | |
4452 | if (info->params.parity != ASYNC_PARITY_NONE) { | |
4453 | RegValue |= BIT1; | |
4454 | if (info->params.parity == ASYNC_PARITY_ODD) | |
4455 | RegValue |= BIT0; | |
4456 | } | |
4457 | write_reg(info, MD1, RegValue); | |
4458 | ||
4459 | /* MD2, Mode Register 2 | |
4460 | * | |
4461 | * 07..02 Reserved, must be 0 | |
6e8dcee3 | 4462 | * 01..00 CNCT<1..0> Channel connection, 00=normal 11=local loopback |
1da177e4 LT |
4463 | * |
4464 | * 0000 0000 | |
4465 | */ | |
4466 | RegValue = 0x00; | |
6e8dcee3 PF |
4467 | if (info->params.loopback) |
4468 | RegValue |= (BIT1 + BIT0); | |
1da177e4 LT |
4469 | write_reg(info, MD2, RegValue); |
4470 | ||
4471 | /* RXS, Receive clock source | |
4472 | * | |
4473 | * 07 Reserved, must be 0 | |
4474 | * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL | |
4475 | * 03..00 RXBR<3..0>, rate divisor, 0000=1 | |
4476 | */ | |
4477 | RegValue=BIT6; | |
4478 | write_reg(info, RXS, RegValue); | |
4479 | ||
4480 | /* TXS, Transmit clock source | |
4481 | * | |
4482 | * 07 Reserved, must be 0 | |
4483 | * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock | |
4484 | * 03..00 RXBR<3..0>, rate divisor, 0000=1 | |
4485 | */ | |
4486 | RegValue=BIT6; | |
4487 | write_reg(info, TXS, RegValue); | |
4488 | ||
4489 | /* Control Register | |
4490 | * | |
4491 | * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out | |
4492 | */ | |
4493 | info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); | |
4494 | write_control_reg(info); | |
4495 | ||
4496 | tx_set_idle(info); | |
4497 | ||
4498 | /* RRC Receive Ready Control 0 | |
4499 | * | |
4500 | * 07..05 Reserved, must be 0 | |
4501 | * 04..00 RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte | |
4502 | */ | |
4503 | write_reg(info, RRC, 0x00); | |
4504 | ||
4505 | /* TRC0 Transmit Ready Control 0 | |
4506 | * | |
4507 | * 07..05 Reserved, must be 0 | |
4508 | * 04..00 TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes | |
4509 | */ | |
4510 | write_reg(info, TRC0, 0x10); | |
4511 | ||
4512 | /* TRC1 Transmit Ready Control 1 | |
4513 | * | |
4514 | * 07..05 Reserved, must be 0 | |
4515 | * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1) | |
4516 | */ | |
4517 | write_reg(info, TRC1, 0x1e); | |
4518 | ||
4519 | /* CTL, MSCI control register | |
4520 | * | |
4521 | * 07..06 Reserved, set to 0 | |
4522 | * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC) | |
4523 | * 04 IDLC, idle control, 0=mark 1=idle register | |
4524 | * 03 BRK, break, 0=off 1 =on (async) | |
4525 | * 02 SYNCLD, sync char load enable (BSC) 1=enabled | |
4526 | * 01 GOP, go active on poll (LOOP mode) 1=enabled | |
4527 | * 00 RTS, RTS output control, 0=active 1=inactive | |
4528 | * | |
4529 | * 0001 0001 | |
4530 | */ | |
4531 | RegValue = 0x10; | |
4532 | if (!(info->serial_signals & SerialSignal_RTS)) | |
4533 | RegValue |= 0x01; | |
4534 | write_reg(info, CTL, RegValue); | |
4535 | ||
4536 | /* enable status interrupts */ | |
4537 | info->ie0_value |= TXINTE + RXINTE; | |
4538 | write_reg(info, IE0, info->ie0_value); | |
4539 | ||
4540 | /* enable break detect interrupt */ | |
4541 | info->ie1_value = BRKD; | |
4542 | write_reg(info, IE1, info->ie1_value); | |
4543 | ||
4544 | /* enable rx overrun interrupt */ | |
4545 | info->ie2_value = OVRN; | |
4546 | write_reg(info, IE2, info->ie2_value); | |
4547 | ||
4548 | set_rate( info, info->params.data_rate * 16 ); | |
1da177e4 LT |
4549 | } |
4550 | ||
4551 | /* Program the SCA for HDLC communications. | |
4552 | */ | |
ce9f9f73 | 4553 | static void hdlc_mode(SLMP_INFO *info) |
1da177e4 LT |
4554 | { |
4555 | unsigned char RegValue; | |
4556 | u32 DpllDivisor; | |
4557 | ||
4558 | // Can't use DPLL because SCA outputs recovered clock on RxC when | |
4559 | // DPLL mode selected. This causes output contention with RxC receiver. | |
4560 | // Use of DPLL would require external hardware to disable RxC receiver | |
4561 | // when DPLL mode selected. | |
4562 | info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL); | |
4563 | ||
4564 | /* disable DMA interrupts */ | |
4565 | write_reg(info, TXDMA + DIR, 0); | |
4566 | write_reg(info, RXDMA + DIR, 0); | |
4567 | ||
4568 | /* MD0, Mode Register 0 | |
4569 | * | |
4570 | * 07..05 PRCTL<2..0>, Protocol Mode, 100=HDLC | |
4571 | * 04 AUTO, Auto-enable (RTS/CTS/DCD) | |
4572 | * 03 Reserved, must be 0 | |
4573 | * 02 CRCCC, CRC Calculation, 1=enabled | |
4574 | * 01 CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16 | |
4575 | * 00 CRC0, CRC initial value, 1 = all 1s | |
4576 | * | |
4577 | * 1000 0001 | |
4578 | */ | |
4579 | RegValue = 0x81; | |
4580 | if (info->params.flags & HDLC_FLAG_AUTO_CTS) | |
4581 | RegValue |= BIT4; | |
4582 | if (info->params.flags & HDLC_FLAG_AUTO_DCD) | |
4583 | RegValue |= BIT4; | |
4584 | if (info->params.crc_type == HDLC_CRC_16_CCITT) | |
4585 | RegValue |= BIT2 + BIT1; | |
4586 | write_reg(info, MD0, RegValue); | |
4587 | ||
4588 | /* MD1, Mode Register 1 | |
4589 | * | |
4590 | * 07..06 ADDRS<1..0>, Address detect, 00=no addr check | |
4591 | * 05..04 TXCHR<1..0>, tx char size, 00=8 bits | |
4592 | * 03..02 RXCHR<1..0>, rx char size, 00=8 bits | |
4593 | * 01..00 PMPM<1..0>, Parity mode, 00=no parity | |
4594 | * | |
4595 | * 0000 0000 | |
4596 | */ | |
4597 | RegValue = 0x00; | |
4598 | write_reg(info, MD1, RegValue); | |
4599 | ||
4600 | /* MD2, Mode Register 2 | |
4601 | * | |
4602 | * 07 NRZFM, 0=NRZ, 1=FM | |
4603 | * 06..05 CODE<1..0> Encoding, 00=NRZ | |
4604 | * 04..03 DRATE<1..0> DPLL Divisor, 00=8 | |
4605 | * 02 Reserved, must be 0 | |
4606 | * 01..00 CNCT<1..0> Channel connection, 0=normal | |
4607 | * | |
4608 | * 0000 0000 | |
4609 | */ | |
4610 | RegValue = 0x00; | |
4611 | switch(info->params.encoding) { | |
4612 | case HDLC_ENCODING_NRZI: RegValue |= BIT5; break; | |
4613 | case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT7 + BIT5; break; /* aka FM1 */ | |
4614 | case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */ | |
4615 | case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break; /* aka Manchester */ | |
4616 | #if 0 | |
4617 | case HDLC_ENCODING_NRZB: /* not supported */ | |
4618 | case HDLC_ENCODING_NRZI_MARK: /* not supported */ | |
4619 | case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: /* not supported */ | |
4620 | #endif | |
4621 | } | |
4622 | if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) { | |
4623 | DpllDivisor = 16; | |
4624 | RegValue |= BIT3; | |
4625 | } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) { | |
4626 | DpllDivisor = 8; | |
4627 | } else { | |
4628 | DpllDivisor = 32; | |
4629 | RegValue |= BIT4; | |
4630 | } | |
4631 | write_reg(info, MD2, RegValue); | |
4632 | ||
4633 | ||
4634 | /* RXS, Receive clock source | |
4635 | * | |
4636 | * 07 Reserved, must be 0 | |
4637 | * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL | |
4638 | * 03..00 RXBR<3..0>, rate divisor, 0000=1 | |
4639 | */ | |
4640 | RegValue=0; | |
4641 | if (info->params.flags & HDLC_FLAG_RXC_BRG) | |
4642 | RegValue |= BIT6; | |
4643 | if (info->params.flags & HDLC_FLAG_RXC_DPLL) | |
4644 | RegValue |= BIT6 + BIT5; | |
4645 | write_reg(info, RXS, RegValue); | |
4646 | ||
4647 | /* TXS, Transmit clock source | |
4648 | * | |
4649 | * 07 Reserved, must be 0 | |
4650 | * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock | |
4651 | * 03..00 RXBR<3..0>, rate divisor, 0000=1 | |
4652 | */ | |
4653 | RegValue=0; | |
4654 | if (info->params.flags & HDLC_FLAG_TXC_BRG) | |
4655 | RegValue |= BIT6; | |
4656 | if (info->params.flags & HDLC_FLAG_TXC_DPLL) | |
4657 | RegValue |= BIT6 + BIT5; | |
4658 | write_reg(info, TXS, RegValue); | |
4659 | ||
4660 | if (info->params.flags & HDLC_FLAG_RXC_DPLL) | |
4661 | set_rate(info, info->params.clock_speed * DpllDivisor); | |
4662 | else | |
4663 | set_rate(info, info->params.clock_speed); | |
4664 | ||
4665 | /* GPDATA (General Purpose I/O Data Register) | |
4666 | * | |
4667 | * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out | |
4668 | */ | |
4669 | if (info->params.flags & HDLC_FLAG_TXC_BRG) | |
4670 | info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); | |
4671 | else | |
4672 | info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2)); | |
4673 | write_control_reg(info); | |
4674 | ||
4675 | /* RRC Receive Ready Control 0 | |
4676 | * | |
4677 | * 07..05 Reserved, must be 0 | |
4678 | * 04..00 RRC<4..0> Rx FIFO trigger active | |
4679 | */ | |
4680 | write_reg(info, RRC, rx_active_fifo_level); | |
4681 | ||
4682 | /* TRC0 Transmit Ready Control 0 | |
4683 | * | |
4684 | * 07..05 Reserved, must be 0 | |
4685 | * 04..00 TRC<4..0> Tx FIFO trigger active | |
4686 | */ | |
4687 | write_reg(info, TRC0, tx_active_fifo_level); | |
4688 | ||
4689 | /* TRC1 Transmit Ready Control 1 | |
4690 | * | |
4691 | * 07..05 Reserved, must be 0 | |
4692 | * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full) | |
4693 | */ | |
4694 | write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1)); | |
4695 | ||
4696 | /* DMR, DMA Mode Register | |
4697 | * | |
4698 | * 07..05 Reserved, must be 0 | |
4699 | * 04 TMOD, Transfer Mode: 1=chained-block | |
4700 | * 03 Reserved, must be 0 | |
4701 | * 02 NF, Number of Frames: 1=multi-frame | |
4702 | * 01 CNTE, Frame End IRQ Counter enable: 0=disabled | |
4703 | * 00 Reserved, must be 0 | |
4704 | * | |
4705 | * 0001 0100 | |
4706 | */ | |
4707 | write_reg(info, TXDMA + DMR, 0x14); | |
4708 | write_reg(info, RXDMA + DMR, 0x14); | |
4709 | ||
4710 | /* Set chain pointer base (upper 8 bits of 24 bit addr) */ | |
4711 | write_reg(info, RXDMA + CPB, | |
4712 | (unsigned char)(info->buffer_list_phys >> 16)); | |
4713 | ||
4714 | /* Set chain pointer base (upper 8 bits of 24 bit addr) */ | |
4715 | write_reg(info, TXDMA + CPB, | |
4716 | (unsigned char)(info->buffer_list_phys >> 16)); | |
4717 | ||
4718 | /* enable status interrupts. other code enables/disables | |
4719 | * the individual sources for these two interrupt classes. | |
4720 | */ | |
4721 | info->ie0_value |= TXINTE + RXINTE; | |
4722 | write_reg(info, IE0, info->ie0_value); | |
4723 | ||
4724 | /* CTL, MSCI control register | |
4725 | * | |
4726 | * 07..06 Reserved, set to 0 | |
4727 | * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC) | |
4728 | * 04 IDLC, idle control, 0=mark 1=idle register | |
4729 | * 03 BRK, break, 0=off 1 =on (async) | |
4730 | * 02 SYNCLD, sync char load enable (BSC) 1=enabled | |
4731 | * 01 GOP, go active on poll (LOOP mode) 1=enabled | |
4732 | * 00 RTS, RTS output control, 0=active 1=inactive | |
4733 | * | |
4734 | * 0001 0001 | |
4735 | */ | |
4736 | RegValue = 0x10; | |
4737 | if (!(info->serial_signals & SerialSignal_RTS)) | |
4738 | RegValue |= 0x01; | |
4739 | write_reg(info, CTL, RegValue); | |
4740 | ||
4741 | /* preamble not supported ! */ | |
4742 | ||
4743 | tx_set_idle(info); | |
4744 | tx_stop(info); | |
4745 | rx_stop(info); | |
4746 | ||
4747 | set_rate(info, info->params.clock_speed); | |
4748 | ||
4749 | if (info->params.loopback) | |
4750 | enable_loopback(info,1); | |
4751 | } | |
4752 | ||
4753 | /* Set the transmit HDLC idle mode | |
4754 | */ | |
ce9f9f73 | 4755 | static void tx_set_idle(SLMP_INFO *info) |
1da177e4 LT |
4756 | { |
4757 | unsigned char RegValue = 0xff; | |
4758 | ||
4759 | /* Map API idle mode to SCA register bits */ | |
4760 | switch(info->idle_mode) { | |
4761 | case HDLC_TXIDLE_FLAGS: RegValue = 0x7e; break; | |
4762 | case HDLC_TXIDLE_ALT_ZEROS_ONES: RegValue = 0xaa; break; | |
4763 | case HDLC_TXIDLE_ZEROS: RegValue = 0x00; break; | |
4764 | case HDLC_TXIDLE_ONES: RegValue = 0xff; break; | |
4765 | case HDLC_TXIDLE_ALT_MARK_SPACE: RegValue = 0xaa; break; | |
4766 | case HDLC_TXIDLE_SPACE: RegValue = 0x00; break; | |
4767 | case HDLC_TXIDLE_MARK: RegValue = 0xff; break; | |
4768 | } | |
4769 | ||
4770 | write_reg(info, IDL, RegValue); | |
4771 | } | |
4772 | ||
4773 | /* Query the adapter for the state of the V24 status (input) signals. | |
4774 | */ | |
ce9f9f73 | 4775 | static void get_signals(SLMP_INFO *info) |
1da177e4 LT |
4776 | { |
4777 | u16 status = read_reg(info, SR3); | |
4778 | u16 gpstatus = read_status_reg(info); | |
4779 | u16 testbit; | |
4780 | ||
4781 | /* clear all serial signals except DTR and RTS */ | |
4782 | info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS; | |
4783 | ||
4784 | /* set serial signal bits to reflect MISR */ | |
4785 | ||
4786 | if (!(status & BIT3)) | |
4787 | info->serial_signals |= SerialSignal_CTS; | |
4788 | ||
4789 | if ( !(status & BIT2)) | |
4790 | info->serial_signals |= SerialSignal_DCD; | |
4791 | ||
4792 | testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7> | |
4793 | if (!(gpstatus & testbit)) | |
4794 | info->serial_signals |= SerialSignal_RI; | |
4795 | ||
4796 | testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6> | |
4797 | if (!(gpstatus & testbit)) | |
4798 | info->serial_signals |= SerialSignal_DSR; | |
4799 | } | |
4800 | ||
4801 | /* Set the state of DTR and RTS based on contents of | |
4802 | * serial_signals member of device context. | |
4803 | */ | |
ce9f9f73 | 4804 | static void set_signals(SLMP_INFO *info) |
1da177e4 LT |
4805 | { |
4806 | unsigned char RegValue; | |
4807 | u16 EnableBit; | |
4808 | ||
4809 | RegValue = read_reg(info, CTL); | |
4810 | if (info->serial_signals & SerialSignal_RTS) | |
4811 | RegValue &= ~BIT0; | |
4812 | else | |
4813 | RegValue |= BIT0; | |
4814 | write_reg(info, CTL, RegValue); | |
4815 | ||
4816 | // Port 0..3 DTR is ctrl reg <1,3,5,7> | |
4817 | EnableBit = BIT1 << (info->port_num*2); | |
4818 | if (info->serial_signals & SerialSignal_DTR) | |
4819 | info->port_array[0]->ctrlreg_value &= ~EnableBit; | |
4820 | else | |
4821 | info->port_array[0]->ctrlreg_value |= EnableBit; | |
4822 | write_control_reg(info); | |
4823 | } | |
4824 | ||
4825 | /*******************/ | |
4826 | /* DMA Buffer Code */ | |
4827 | /*******************/ | |
4828 | ||
4829 | /* Set the count for all receive buffers to SCABUFSIZE | |
4830 | * and set the current buffer to the first buffer. This effectively | |
4831 | * makes all buffers free and discards any data in buffers. | |
4832 | */ | |
ce9f9f73 | 4833 | static void rx_reset_buffers(SLMP_INFO *info) |
1da177e4 LT |
4834 | { |
4835 | rx_free_frame_buffers(info, 0, info->rx_buf_count - 1); | |
4836 | } | |
4837 | ||
4838 | /* Free the buffers used by a received frame | |
4839 | * | |
4840 | * info pointer to device instance data | |
4841 | * first index of 1st receive buffer of frame | |
4842 | * last index of last receive buffer of frame | |
4843 | */ | |
ce9f9f73 | 4844 | static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last) |
1da177e4 | 4845 | { |
0fab6de0 | 4846 | bool done = false; |
1da177e4 LT |
4847 | |
4848 | while(!done) { | |
4849 | /* reset current buffer for reuse */ | |
4850 | info->rx_buf_list[first].status = 0xff; | |
4851 | ||
4852 | if (first == last) { | |
0fab6de0 | 4853 | done = true; |
1da177e4 LT |
4854 | /* set new last rx descriptor address */ |
4855 | write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry); | |
4856 | } | |
4857 | ||
4858 | first++; | |
4859 | if (first == info->rx_buf_count) | |
4860 | first = 0; | |
4861 | } | |
4862 | ||
4863 | /* set current buffer to next buffer after last buffer of frame */ | |
4864 | info->current_rx_buf = first; | |
4865 | } | |
4866 | ||
4867 | /* Return a received frame from the receive DMA buffers. | |
4868 | * Only frames received without errors are returned. | |
4869 | * | |
0fab6de0 | 4870 | * Return Value: true if frame returned, otherwise false |
1da177e4 | 4871 | */ |
ce9f9f73 | 4872 | static bool rx_get_frame(SLMP_INFO *info) |
1da177e4 LT |
4873 | { |
4874 | unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */ | |
4875 | unsigned short status; | |
4876 | unsigned int framesize = 0; | |
0fab6de0 | 4877 | bool ReturnCode = false; |
1da177e4 LT |
4878 | unsigned long flags; |
4879 | struct tty_struct *tty = info->tty; | |
4880 | unsigned char addr_field = 0xff; | |
4881 | SCADESC *desc; | |
4882 | SCADESC_EX *desc_ex; | |
4883 | ||
4884 | CheckAgain: | |
4885 | /* assume no frame returned, set zero length */ | |
4886 | framesize = 0; | |
4887 | addr_field = 0xff; | |
4888 | ||
4889 | /* | |
4890 | * current_rx_buf points to the 1st buffer of the next available | |
4891 | * receive frame. To find the last buffer of the frame look for | |
4892 | * a non-zero status field in the buffer entries. (The status | |
4893 | * field is set by the 16C32 after completing a receive frame. | |
4894 | */ | |
4895 | StartIndex = EndIndex = info->current_rx_buf; | |
4896 | ||
4897 | for ( ;; ) { | |
4898 | desc = &info->rx_buf_list[EndIndex]; | |
4899 | desc_ex = &info->rx_buf_list_ex[EndIndex]; | |
4900 | ||
4901 | if (desc->status == 0xff) | |
4902 | goto Cleanup; /* current desc still in use, no frames available */ | |
4903 | ||
4904 | if (framesize == 0 && info->params.addr_filter != 0xff) | |
4905 | addr_field = desc_ex->virt_addr[0]; | |
4906 | ||
4907 | framesize += desc->length; | |
4908 | ||
4909 | /* Status != 0 means last buffer of frame */ | |
4910 | if (desc->status) | |
4911 | break; | |
4912 | ||
4913 | EndIndex++; | |
4914 | if (EndIndex == info->rx_buf_count) | |
4915 | EndIndex = 0; | |
4916 | ||
4917 | if (EndIndex == info->current_rx_buf) { | |
4918 | /* all buffers have been 'used' but none mark */ | |
4919 | /* the end of a frame. Reset buffers and receiver. */ | |
4920 | if ( info->rx_enabled ){ | |
4921 | spin_lock_irqsave(&info->lock,flags); | |
4922 | rx_start(info); | |
4923 | spin_unlock_irqrestore(&info->lock,flags); | |
4924 | } | |
4925 | goto Cleanup; | |
4926 | } | |
4927 | ||
4928 | } | |
4929 | ||
4930 | /* check status of receive frame */ | |
4931 | ||
4932 | /* frame status is byte stored after frame data | |
4933 | * | |
4934 | * 7 EOM (end of msg), 1 = last buffer of frame | |
4935 | * 6 Short Frame, 1 = short frame | |
4936 | * 5 Abort, 1 = frame aborted | |
4937 | * 4 Residue, 1 = last byte is partial | |
4938 | * 3 Overrun, 1 = overrun occurred during frame reception | |
4939 | * 2 CRC, 1 = CRC error detected | |
4940 | * | |
4941 | */ | |
4942 | status = desc->status; | |
4943 | ||
4944 | /* ignore CRC bit if not using CRC (bit is undefined) */ | |
4945 | /* Note:CRC is not save to data buffer */ | |
4946 | if (info->params.crc_type == HDLC_CRC_NONE) | |
4947 | status &= ~BIT2; | |
4948 | ||
4949 | if (framesize == 0 || | |
4950 | (addr_field != 0xff && addr_field != info->params.addr_filter)) { | |
4951 | /* discard 0 byte frames, this seems to occur sometime | |
4952 | * when remote is idling flags. | |
4953 | */ | |
4954 | rx_free_frame_buffers(info, StartIndex, EndIndex); | |
4955 | goto CheckAgain; | |
4956 | } | |
4957 | ||
4958 | if (framesize < 2) | |
4959 | status |= BIT6; | |
4960 | ||
4961 | if (status & (BIT6+BIT5+BIT3+BIT2)) { | |
4962 | /* received frame has errors, | |
4963 | * update counts and mark frame size as 0 | |
4964 | */ | |
4965 | if (status & BIT6) | |
4966 | info->icount.rxshort++; | |
4967 | else if (status & BIT5) | |
4968 | info->icount.rxabort++; | |
4969 | else if (status & BIT3) | |
4970 | info->icount.rxover++; | |
4971 | else | |
4972 | info->icount.rxcrc++; | |
4973 | ||
4974 | framesize = 0; | |
af69c7f9 | 4975 | #if SYNCLINK_GENERIC_HDLC |
1da177e4 LT |
4976 | { |
4977 | struct net_device_stats *stats = hdlc_stats(info->netdev); | |
4978 | stats->rx_errors++; | |
4979 | stats->rx_frame_errors++; | |
4980 | } | |
4981 | #endif | |
4982 | } | |
4983 | ||
4984 | if ( debug_level >= DEBUG_LEVEL_BH ) | |
4985 | printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n", | |
4986 | __FILE__,__LINE__,info->device_name,status,framesize); | |
4987 | ||
4988 | if ( debug_level >= DEBUG_LEVEL_DATA ) | |
4989 | trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr, | |
4990 | min_t(int, framesize,SCABUFSIZE),0); | |
4991 | ||
4992 | if (framesize) { | |
4993 | if (framesize > info->max_frame_size) | |
4994 | info->icount.rxlong++; | |
4995 | else { | |
4996 | /* copy dma buffer(s) to contiguous intermediate buffer */ | |
4997 | int copy_count = framesize; | |
4998 | int index = StartIndex; | |
4999 | unsigned char *ptmp = info->tmp_rx_buf; | |
5000 | info->tmp_rx_buf_count = framesize; | |
5001 | ||
5002 | info->icount.rxok++; | |
5003 | ||
5004 | while(copy_count) { | |
5005 | int partial_count = min(copy_count,SCABUFSIZE); | |
5006 | memcpy( ptmp, | |
5007 | info->rx_buf_list_ex[index].virt_addr, | |
5008 | partial_count ); | |
5009 | ptmp += partial_count; | |
5010 | copy_count -= partial_count; | |
5011 | ||
5012 | if ( ++index == info->rx_buf_count ) | |
5013 | index = 0; | |
5014 | } | |
5015 | ||
af69c7f9 | 5016 | #if SYNCLINK_GENERIC_HDLC |
1da177e4 LT |
5017 | if (info->netcount) |
5018 | hdlcdev_rx(info,info->tmp_rx_buf,framesize); | |
5019 | else | |
5020 | #endif | |
5021 | ldisc_receive_buf(tty,info->tmp_rx_buf, | |
5022 | info->flag_buf, framesize); | |
5023 | } | |
5024 | } | |
5025 | /* Free the buffers used by this frame. */ | |
5026 | rx_free_frame_buffers( info, StartIndex, EndIndex ); | |
5027 | ||
0fab6de0 | 5028 | ReturnCode = true; |
1da177e4 LT |
5029 | |
5030 | Cleanup: | |
5031 | if ( info->rx_enabled && info->rx_overflow ) { | |
5032 | /* Receiver is enabled, but needs to restarted due to | |
5033 | * rx buffer overflow. If buffers are empty, restart receiver. | |
5034 | */ | |
5035 | if (info->rx_buf_list[EndIndex].status == 0xff) { | |
5036 | spin_lock_irqsave(&info->lock,flags); | |
5037 | rx_start(info); | |
5038 | spin_unlock_irqrestore(&info->lock,flags); | |
5039 | } | |
5040 | } | |
5041 | ||
5042 | return ReturnCode; | |
5043 | } | |
5044 | ||
5045 | /* load the transmit DMA buffer with data | |
5046 | */ | |
ce9f9f73 | 5047 | static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count) |
1da177e4 LT |
5048 | { |
5049 | unsigned short copy_count; | |
5050 | unsigned int i = 0; | |
5051 | SCADESC *desc; | |
5052 | SCADESC_EX *desc_ex; | |
5053 | ||
5054 | if ( debug_level >= DEBUG_LEVEL_DATA ) | |
5055 | trace_block(info,buf, min_t(int, count,SCABUFSIZE), 1); | |
5056 | ||
5057 | /* Copy source buffer to one or more DMA buffers, starting with | |
5058 | * the first transmit dma buffer. | |
5059 | */ | |
5060 | for(i=0;;) | |
5061 | { | |
5062 | copy_count = min_t(unsigned short,count,SCABUFSIZE); | |
5063 | ||
5064 | desc = &info->tx_buf_list[i]; | |
5065 | desc_ex = &info->tx_buf_list_ex[i]; | |
5066 | ||
5067 | load_pci_memory(info, desc_ex->virt_addr,buf,copy_count); | |
5068 | ||
5069 | desc->length = copy_count; | |
5070 | desc->status = 0; | |
5071 | ||
5072 | buf += copy_count; | |
5073 | count -= copy_count; | |
5074 | ||
5075 | if (!count) | |
5076 | break; | |
5077 | ||
5078 | i++; | |
5079 | if (i >= info->tx_buf_count) | |
5080 | i = 0; | |
5081 | } | |
5082 | ||
5083 | info->tx_buf_list[i].status = 0x81; /* set EOM and EOT status */ | |
5084 | info->last_tx_buf = ++i; | |
5085 | } | |
5086 | ||
ce9f9f73 | 5087 | static bool register_test(SLMP_INFO *info) |
1da177e4 LT |
5088 | { |
5089 | static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96}; | |
fe971071 | 5090 | static unsigned int count = ARRAY_SIZE(testval); |
1da177e4 | 5091 | unsigned int i; |
0fab6de0 | 5092 | bool rc = true; |
1da177e4 LT |
5093 | unsigned long flags; |
5094 | ||
5095 | spin_lock_irqsave(&info->lock,flags); | |
5096 | reset_port(info); | |
5097 | ||
5098 | /* assume failure */ | |
5099 | info->init_error = DiagStatus_AddressFailure; | |
5100 | ||
5101 | /* Write bit patterns to various registers but do it out of */ | |
5102 | /* sync, then read back and verify values. */ | |
5103 | ||
5104 | for (i = 0 ; i < count ; i++) { | |
5105 | write_reg(info, TMC, testval[i]); | |
5106 | write_reg(info, IDL, testval[(i+1)%count]); | |
5107 | write_reg(info, SA0, testval[(i+2)%count]); | |
5108 | write_reg(info, SA1, testval[(i+3)%count]); | |
5109 | ||
5110 | if ( (read_reg(info, TMC) != testval[i]) || | |
5111 | (read_reg(info, IDL) != testval[(i+1)%count]) || | |
5112 | (read_reg(info, SA0) != testval[(i+2)%count]) || | |
5113 | (read_reg(info, SA1) != testval[(i+3)%count]) ) | |
5114 | { | |
0fab6de0 | 5115 | rc = false; |
1da177e4 LT |
5116 | break; |
5117 | } | |
5118 | } | |
5119 | ||
5120 | reset_port(info); | |
5121 | spin_unlock_irqrestore(&info->lock,flags); | |
5122 | ||
5123 | return rc; | |
5124 | } | |
5125 | ||
ce9f9f73 | 5126 | static bool irq_test(SLMP_INFO *info) |
1da177e4 LT |
5127 | { |
5128 | unsigned long timeout; | |
5129 | unsigned long flags; | |
5130 | ||
5131 | unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0; | |
5132 | ||
5133 | spin_lock_irqsave(&info->lock,flags); | |
5134 | reset_port(info); | |
5135 | ||
5136 | /* assume failure */ | |
5137 | info->init_error = DiagStatus_IrqFailure; | |
0fab6de0 | 5138 | info->irq_occurred = false; |
1da177e4 LT |
5139 | |
5140 | /* setup timer0 on SCA0 to interrupt */ | |
5141 | ||
5142 | /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */ | |
5143 | write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4)); | |
5144 | ||
5145 | write_reg(info, (unsigned char)(timer + TEPR), 0); /* timer expand prescale */ | |
5146 | write_reg16(info, (unsigned char)(timer + TCONR), 1); /* timer constant */ | |
5147 | ||
5148 | ||
5149 | /* TMCS, Timer Control/Status Register | |
5150 | * | |
5151 | * 07 CMF, Compare match flag (read only) 1=match | |
5152 | * 06 ECMI, CMF Interrupt Enable: 1=enabled | |
5153 | * 05 Reserved, must be 0 | |
5154 | * 04 TME, Timer Enable | |
5155 | * 03..00 Reserved, must be 0 | |
5156 | * | |
5157 | * 0101 0000 | |
5158 | */ | |
5159 | write_reg(info, (unsigned char)(timer + TMCS), 0x50); | |
5160 | ||
5161 | spin_unlock_irqrestore(&info->lock,flags); | |
5162 | ||
5163 | timeout=100; | |
5164 | while( timeout-- && !info->irq_occurred ) { | |
5165 | msleep_interruptible(10); | |
5166 | } | |
5167 | ||
5168 | spin_lock_irqsave(&info->lock,flags); | |
5169 | reset_port(info); | |
5170 | spin_unlock_irqrestore(&info->lock,flags); | |
5171 | ||
5172 | return info->irq_occurred; | |
5173 | } | |
5174 | ||
5175 | /* initialize individual SCA device (2 ports) | |
5176 | */ | |
0fab6de0 | 5177 | static bool sca_init(SLMP_INFO *info) |
1da177e4 LT |
5178 | { |
5179 | /* set wait controller to single mem partition (low), no wait states */ | |
5180 | write_reg(info, PABR0, 0); /* wait controller addr boundary 0 */ | |
5181 | write_reg(info, PABR1, 0); /* wait controller addr boundary 1 */ | |
5182 | write_reg(info, WCRL, 0); /* wait controller low range */ | |
5183 | write_reg(info, WCRM, 0); /* wait controller mid range */ | |
5184 | write_reg(info, WCRH, 0); /* wait controller high range */ | |
5185 | ||
5186 | /* DPCR, DMA Priority Control | |
5187 | * | |
5188 | * 07..05 Not used, must be 0 | |
5189 | * 04 BRC, bus release condition: 0=all transfers complete | |
5190 | * 03 CCC, channel change condition: 0=every cycle | |
5191 | * 02..00 PR<2..0>, priority 100=round robin | |
5192 | * | |
5193 | * 00000100 = 0x04 | |
5194 | */ | |
5195 | write_reg(info, DPCR, dma_priority); | |
5196 | ||
5197 | /* DMA Master Enable, BIT7: 1=enable all channels */ | |
5198 | write_reg(info, DMER, 0x80); | |
5199 | ||
5200 | /* enable all interrupt classes */ | |
5201 | write_reg(info, IER0, 0xff); /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */ | |
5202 | write_reg(info, IER1, 0xff); /* DMIB,DMIA (channels 0-3) */ | |
5203 | write_reg(info, IER2, 0xf0); /* TIRQ (timers 0-3) */ | |
5204 | ||
5205 | /* ITCR, interrupt control register | |
5206 | * 07 IPC, interrupt priority, 0=MSCI->DMA | |
5207 | * 06..05 IAK<1..0>, Acknowledge cycle, 00=non-ack cycle | |
5208 | * 04 VOS, Vector Output, 0=unmodified vector | |
5209 | * 03..00 Reserved, must be 0 | |
5210 | */ | |
5211 | write_reg(info, ITCR, 0); | |
5212 | ||
0fab6de0 | 5213 | return true; |
1da177e4 LT |
5214 | } |
5215 | ||
5216 | /* initialize adapter hardware | |
5217 | */ | |
ce9f9f73 | 5218 | static bool init_adapter(SLMP_INFO *info) |
1da177e4 LT |
5219 | { |
5220 | int i; | |
5221 | ||
5222 | /* Set BIT30 of Local Control Reg 0x50 to reset SCA */ | |
5223 | volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50); | |
5224 | u32 readval; | |
5225 | ||
5226 | info->misc_ctrl_value |= BIT30; | |
5227 | *MiscCtrl = info->misc_ctrl_value; | |
5228 | ||
5229 | /* | |
5230 | * Force at least 170ns delay before clearing | |
5231 | * reset bit. Each read from LCR takes at least | |
5232 | * 30ns so 10 times for 300ns to be safe. | |
5233 | */ | |
5234 | for(i=0;i<10;i++) | |
5235 | readval = *MiscCtrl; | |
5236 | ||
5237 | info->misc_ctrl_value &= ~BIT30; | |
5238 | *MiscCtrl = info->misc_ctrl_value; | |
5239 | ||
5240 | /* init control reg (all DTRs off, all clksel=input) */ | |
5241 | info->ctrlreg_value = 0xaa; | |
5242 | write_control_reg(info); | |
5243 | ||
5244 | { | |
5245 | volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c); | |
5246 | lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3); | |
5247 | ||
5248 | switch(read_ahead_count) | |
5249 | { | |
5250 | case 16: | |
5251 | lcr1_brdr_value |= BIT5 + BIT4 + BIT3; | |
5252 | break; | |
5253 | case 8: | |
5254 | lcr1_brdr_value |= BIT5 + BIT4; | |
5255 | break; | |
5256 | case 4: | |
5257 | lcr1_brdr_value |= BIT5 + BIT3; | |
5258 | break; | |
5259 | case 0: | |
5260 | lcr1_brdr_value |= BIT5; | |
5261 | break; | |
5262 | } | |
5263 | ||
5264 | *LCR1BRDR = lcr1_brdr_value; | |
5265 | *MiscCtrl = misc_ctrl_value; | |
5266 | } | |
5267 | ||
5268 | sca_init(info->port_array[0]); | |
5269 | sca_init(info->port_array[2]); | |
5270 | ||
0fab6de0 | 5271 | return true; |
1da177e4 LT |
5272 | } |
5273 | ||
5274 | /* Loopback an HDLC frame to test the hardware | |
5275 | * interrupt and DMA functions. | |
5276 | */ | |
ce9f9f73 | 5277 | static bool loopback_test(SLMP_INFO *info) |
1da177e4 LT |
5278 | { |
5279 | #define TESTFRAMESIZE 20 | |
5280 | ||
5281 | unsigned long timeout; | |
5282 | u16 count = TESTFRAMESIZE; | |
5283 | unsigned char buf[TESTFRAMESIZE]; | |
0fab6de0 | 5284 | bool rc = false; |
1da177e4 LT |
5285 | unsigned long flags; |
5286 | ||
5287 | struct tty_struct *oldtty = info->tty; | |
5288 | u32 speed = info->params.clock_speed; | |
5289 | ||
5290 | info->params.clock_speed = 3686400; | |
5291 | info->tty = NULL; | |
5292 | ||
5293 | /* assume failure */ | |
5294 | info->init_error = DiagStatus_DmaFailure; | |
5295 | ||
5296 | /* build and send transmit frame */ | |
5297 | for (count = 0; count < TESTFRAMESIZE;++count) | |
5298 | buf[count] = (unsigned char)count; | |
5299 | ||
5300 | memset(info->tmp_rx_buf,0,TESTFRAMESIZE); | |
5301 | ||
5302 | /* program hardware for HDLC and enabled receiver */ | |
5303 | spin_lock_irqsave(&info->lock,flags); | |
5304 | hdlc_mode(info); | |
5305 | enable_loopback(info,1); | |
5306 | rx_start(info); | |
5307 | info->tx_count = count; | |
5308 | tx_load_dma_buffer(info,buf,count); | |
5309 | tx_start(info); | |
5310 | spin_unlock_irqrestore(&info->lock,flags); | |
5311 | ||
5312 | /* wait for receive complete */ | |
5313 | /* Set a timeout for waiting for interrupt. */ | |
5314 | for ( timeout = 100; timeout; --timeout ) { | |
5315 | msleep_interruptible(10); | |
5316 | ||
5317 | if (rx_get_frame(info)) { | |
0fab6de0 | 5318 | rc = true; |
1da177e4 LT |
5319 | break; |
5320 | } | |
5321 | } | |
5322 | ||
5323 | /* verify received frame length and contents */ | |
0fab6de0 JP |
5324 | if (rc && |
5325 | ( info->tmp_rx_buf_count != count || | |
5326 | memcmp(buf, info->tmp_rx_buf,count))) { | |
5327 | rc = false; | |
1da177e4 LT |
5328 | } |
5329 | ||
5330 | spin_lock_irqsave(&info->lock,flags); | |
5331 | reset_adapter(info); | |
5332 | spin_unlock_irqrestore(&info->lock,flags); | |
5333 | ||
5334 | info->params.clock_speed = speed; | |
5335 | info->tty = oldtty; | |
5336 | ||
5337 | return rc; | |
5338 | } | |
5339 | ||
5340 | /* Perform diagnostics on hardware | |
5341 | */ | |
ce9f9f73 | 5342 | static int adapter_test( SLMP_INFO *info ) |
1da177e4 LT |
5343 | { |
5344 | unsigned long flags; | |
5345 | if ( debug_level >= DEBUG_LEVEL_INFO ) | |
5346 | printk( "%s(%d):Testing device %s\n", | |
5347 | __FILE__,__LINE__,info->device_name ); | |
5348 | ||
5349 | spin_lock_irqsave(&info->lock,flags); | |
5350 | init_adapter(info); | |
5351 | spin_unlock_irqrestore(&info->lock,flags); | |
5352 | ||
5353 | info->port_array[0]->port_count = 0; | |
5354 | ||
5355 | if ( register_test(info->port_array[0]) && | |
5356 | register_test(info->port_array[1])) { | |
5357 | ||
5358 | info->port_array[0]->port_count = 2; | |
5359 | ||
5360 | if ( register_test(info->port_array[2]) && | |
5361 | register_test(info->port_array[3]) ) | |
5362 | info->port_array[0]->port_count += 2; | |
5363 | } | |
5364 | else { | |
5365 | printk( "%s(%d):Register test failure for device %s Addr=%08lX\n", | |
5366 | __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base)); | |
5367 | return -ENODEV; | |
5368 | } | |
5369 | ||
5370 | if ( !irq_test(info->port_array[0]) || | |
5371 | !irq_test(info->port_array[1]) || | |
5372 | (info->port_count == 4 && !irq_test(info->port_array[2])) || | |
5373 | (info->port_count == 4 && !irq_test(info->port_array[3]))) { | |
5374 | printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n", | |
5375 | __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) ); | |
5376 | return -ENODEV; | |
5377 | } | |
5378 | ||
5379 | if (!loopback_test(info->port_array[0]) || | |
5380 | !loopback_test(info->port_array[1]) || | |
5381 | (info->port_count == 4 && !loopback_test(info->port_array[2])) || | |
5382 | (info->port_count == 4 && !loopback_test(info->port_array[3]))) { | |
5383 | printk( "%s(%d):DMA test failure for device %s\n", | |
5384 | __FILE__,__LINE__,info->device_name); | |
5385 | return -ENODEV; | |
5386 | } | |
5387 | ||
5388 | if ( debug_level >= DEBUG_LEVEL_INFO ) | |
5389 | printk( "%s(%d):device %s passed diagnostics\n", | |
5390 | __FILE__,__LINE__,info->device_name ); | |
5391 | ||
5392 | info->port_array[0]->init_error = 0; | |
5393 | info->port_array[1]->init_error = 0; | |
5394 | if ( info->port_count > 2 ) { | |
5395 | info->port_array[2]->init_error = 0; | |
5396 | info->port_array[3]->init_error = 0; | |
5397 | } | |
5398 | ||
5399 | return 0; | |
5400 | } | |
5401 | ||
5402 | /* Test the shared memory on a PCI adapter. | |
5403 | */ | |
ce9f9f73 | 5404 | static bool memory_test(SLMP_INFO *info) |
1da177e4 LT |
5405 | { |
5406 | static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa, | |
5407 | 0x66666666, 0x99999999, 0xffffffff, 0x12345678 }; | |
fe971071 | 5408 | unsigned long count = ARRAY_SIZE(testval); |
1da177e4 LT |
5409 | unsigned long i; |
5410 | unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long); | |
5411 | unsigned long * addr = (unsigned long *)info->memory_base; | |
5412 | ||
5413 | /* Test data lines with test pattern at one location. */ | |
5414 | ||
5415 | for ( i = 0 ; i < count ; i++ ) { | |
5416 | *addr = testval[i]; | |
5417 | if ( *addr != testval[i] ) | |
0fab6de0 | 5418 | return false; |
1da177e4 LT |
5419 | } |
5420 | ||
5421 | /* Test address lines with incrementing pattern over */ | |
5422 | /* entire address range. */ | |
5423 | ||
5424 | for ( i = 0 ; i < limit ; i++ ) { | |
5425 | *addr = i * 4; | |
5426 | addr++; | |
5427 | } | |
5428 | ||
5429 | addr = (unsigned long *)info->memory_base; | |
5430 | ||
5431 | for ( i = 0 ; i < limit ; i++ ) { | |
5432 | if ( *addr != i * 4 ) | |
0fab6de0 | 5433 | return false; |
1da177e4 LT |
5434 | addr++; |
5435 | } | |
5436 | ||
5437 | memset( info->memory_base, 0, SCA_MEM_SIZE ); | |
0fab6de0 | 5438 | return true; |
1da177e4 LT |
5439 | } |
5440 | ||
5441 | /* Load data into PCI adapter shared memory. | |
5442 | * | |
5443 | * The PCI9050 releases control of the local bus | |
5444 | * after completing the current read or write operation. | |
5445 | * | |
5446 | * While the PCI9050 write FIFO not empty, the | |
5447 | * PCI9050 treats all of the writes as a single transaction | |
5448 | * and does not release the bus. This causes DMA latency problems | |
5449 | * at high speeds when copying large data blocks to the shared memory. | |
5450 | * | |
5451 | * This function breaks a write into multiple transations by | |
5452 | * interleaving a read which flushes the write FIFO and 'completes' | |
5453 | * the write transation. This allows any pending DMA request to gain control | |
5454 | * of the local bus in a timely fasion. | |
5455 | */ | |
ce9f9f73 | 5456 | static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count) |
1da177e4 LT |
5457 | { |
5458 | /* A load interval of 16 allows for 4 32-bit writes at */ | |
5459 | /* 136ns each for a maximum latency of 542ns on the local bus.*/ | |
5460 | ||
5461 | unsigned short interval = count / sca_pci_load_interval; | |
5462 | unsigned short i; | |
5463 | ||
5464 | for ( i = 0 ; i < interval ; i++ ) | |
5465 | { | |
5466 | memcpy(dest, src, sca_pci_load_interval); | |
5467 | read_status_reg(info); | |
5468 | dest += sca_pci_load_interval; | |
5469 | src += sca_pci_load_interval; | |
5470 | } | |
5471 | ||
5472 | memcpy(dest, src, count % sca_pci_load_interval); | |
5473 | } | |
5474 | ||
ce9f9f73 | 5475 | static void trace_block(SLMP_INFO *info,const char* data, int count, int xmit) |
1da177e4 LT |
5476 | { |
5477 | int i; | |
5478 | int linecount; | |
5479 | if (xmit) | |
5480 | printk("%s tx data:\n",info->device_name); | |
5481 | else | |
5482 | printk("%s rx data:\n",info->device_name); | |
5483 | ||
5484 | while(count) { | |
5485 | if (count > 16) | |
5486 | linecount = 16; | |
5487 | else | |
5488 | linecount = count; | |
5489 | ||
5490 | for(i=0;i<linecount;i++) | |
5491 | printk("%02X ",(unsigned char)data[i]); | |
5492 | for(;i<17;i++) | |
5493 | printk(" "); | |
5494 | for(i=0;i<linecount;i++) { | |
5495 | if (data[i]>=040 && data[i]<=0176) | |
5496 | printk("%c",data[i]); | |
5497 | else | |
5498 | printk("."); | |
5499 | } | |
5500 | printk("\n"); | |
5501 | ||
5502 | data += linecount; | |
5503 | count -= linecount; | |
5504 | } | |
5505 | } /* end of trace_block() */ | |
5506 | ||
5507 | /* called when HDLC frame times out | |
5508 | * update stats and do tx completion processing | |
5509 | */ | |
ce9f9f73 | 5510 | static void tx_timeout(unsigned long context) |
1da177e4 LT |
5511 | { |
5512 | SLMP_INFO *info = (SLMP_INFO*)context; | |
5513 | unsigned long flags; | |
5514 | ||
5515 | if ( debug_level >= DEBUG_LEVEL_INFO ) | |
5516 | printk( "%s(%d):%s tx_timeout()\n", | |
5517 | __FILE__,__LINE__,info->device_name); | |
5518 | if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) { | |
5519 | info->icount.txtimeout++; | |
5520 | } | |
5521 | spin_lock_irqsave(&info->lock,flags); | |
0fab6de0 | 5522 | info->tx_active = false; |
1da177e4 LT |
5523 | info->tx_count = info->tx_put = info->tx_get = 0; |
5524 | ||
5525 | spin_unlock_irqrestore(&info->lock,flags); | |
5526 | ||
af69c7f9 | 5527 | #if SYNCLINK_GENERIC_HDLC |
1da177e4 LT |
5528 | if (info->netcount) |
5529 | hdlcdev_tx_done(info); | |
5530 | else | |
5531 | #endif | |
5532 | bh_transmit(info); | |
5533 | } | |
5534 | ||
5535 | /* called to periodically check the DSR/RI modem signal input status | |
5536 | */ | |
ce9f9f73 | 5537 | static void status_timeout(unsigned long context) |
1da177e4 LT |
5538 | { |
5539 | u16 status = 0; | |
5540 | SLMP_INFO *info = (SLMP_INFO*)context; | |
5541 | unsigned long flags; | |
5542 | unsigned char delta; | |
5543 | ||
5544 | ||
5545 | spin_lock_irqsave(&info->lock,flags); | |
5546 | get_signals(info); | |
5547 | spin_unlock_irqrestore(&info->lock,flags); | |
5548 | ||
5549 | /* check for DSR/RI state change */ | |
5550 | ||
5551 | delta = info->old_signals ^ info->serial_signals; | |
5552 | info->old_signals = info->serial_signals; | |
5553 | ||
5554 | if (delta & SerialSignal_DSR) | |
5555 | status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR); | |
5556 | ||
5557 | if (delta & SerialSignal_RI) | |
5558 | status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI); | |
5559 | ||
5560 | if (delta & SerialSignal_DCD) | |
5561 | status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD); | |
5562 | ||
5563 | if (delta & SerialSignal_CTS) | |
5564 | status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS); | |
5565 | ||
5566 | if (status) | |
5567 | isr_io_pin(info,status); | |
5568 | ||
40565f19 | 5569 | mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10)); |
1da177e4 LT |
5570 | } |
5571 | ||
5572 | ||
5573 | /* Register Access Routines - | |
5574 | * All registers are memory mapped | |
5575 | */ | |
5576 | #define CALC_REGADDR() \ | |
5577 | unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \ | |
5578 | if (info->port_num > 1) \ | |
5579 | RegAddr += 256; /* port 0-1 SCA0, 2-3 SCA1 */ \ | |
5580 | if ( info->port_num & 1) { \ | |
5581 | if (Addr > 0x7f) \ | |
5582 | RegAddr += 0x40; /* DMA access */ \ | |
5583 | else if (Addr > 0x1f && Addr < 0x60) \ | |
5584 | RegAddr += 0x20; /* MSCI access */ \ | |
5585 | } | |
5586 | ||
5587 | ||
ce9f9f73 | 5588 | static unsigned char read_reg(SLMP_INFO * info, unsigned char Addr) |
1da177e4 LT |
5589 | { |
5590 | CALC_REGADDR(); | |
5591 | return *RegAddr; | |
5592 | } | |
ce9f9f73 | 5593 | static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value) |
1da177e4 LT |
5594 | { |
5595 | CALC_REGADDR(); | |
5596 | *RegAddr = Value; | |
5597 | } | |
5598 | ||
ce9f9f73 | 5599 | static u16 read_reg16(SLMP_INFO * info, unsigned char Addr) |
1da177e4 LT |
5600 | { |
5601 | CALC_REGADDR(); | |
5602 | return *((u16 *)RegAddr); | |
5603 | } | |
5604 | ||
ce9f9f73 | 5605 | static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value) |
1da177e4 LT |
5606 | { |
5607 | CALC_REGADDR(); | |
5608 | *((u16 *)RegAddr) = Value; | |
5609 | } | |
5610 | ||
ce9f9f73 | 5611 | static unsigned char read_status_reg(SLMP_INFO * info) |
1da177e4 LT |
5612 | { |
5613 | unsigned char *RegAddr = (unsigned char *)info->statctrl_base; | |
5614 | return *RegAddr; | |
5615 | } | |
5616 | ||
ce9f9f73 | 5617 | static void write_control_reg(SLMP_INFO * info) |
1da177e4 LT |
5618 | { |
5619 | unsigned char *RegAddr = (unsigned char *)info->statctrl_base; | |
5620 | *RegAddr = info->port_array[0]->ctrlreg_value; | |
5621 | } | |
5622 | ||
5623 | ||
5624 | static int __devinit synclinkmp_init_one (struct pci_dev *dev, | |
5625 | const struct pci_device_id *ent) | |
5626 | { | |
5627 | if (pci_enable_device(dev)) { | |
5628 | printk("error enabling pci device %p\n", dev); | |
5629 | return -EIO; | |
5630 | } | |
5631 | device_init( ++synclinkmp_adapter_count, dev ); | |
5632 | return 0; | |
5633 | } | |
5634 | ||
5635 | static void __devexit synclinkmp_remove_one (struct pci_dev *dev) | |
5636 | { | |
5637 | } |