Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * drivers/char/vme_scc.c: MVME147, MVME162, BVME6000 SCC serial ports | |
3 | * implementation. | |
4 | * Copyright 1999 Richard Hirst <richard@sleepie.demon.co.uk> | |
5 | * | |
6 | * Based on atari_SCC.c which was | |
7 | * Copyright 1994-95 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de> | |
8 | * Partially based on PC-Linux serial.c by Linus Torvalds and Theodore Ts'o | |
9 | * | |
10 | * This file is subject to the terms and conditions of the GNU General Public | |
11 | * License. See the file COPYING in the main directory of this archive | |
12 | * for more details. | |
13 | * | |
14 | */ | |
15 | ||
16 | #include <linux/module.h> | |
1da177e4 LT |
17 | #include <linux/kdev_t.h> |
18 | #include <asm/io.h> | |
19 | #include <linux/kernel.h> | |
20 | #include <linux/sched.h> | |
21 | #include <linux/ioport.h> | |
22 | #include <linux/interrupt.h> | |
23 | #include <linux/errno.h> | |
24 | #include <linux/tty.h> | |
25 | #include <linux/tty_flip.h> | |
26 | #include <linux/mm.h> | |
27 | #include <linux/serial.h> | |
28 | #include <linux/fcntl.h> | |
29 | #include <linux/major.h> | |
30 | #include <linux/delay.h> | |
31 | #include <linux/slab.h> | |
32 | #include <linux/miscdevice.h> | |
33 | #include <linux/console.h> | |
34 | #include <linux/init.h> | |
35 | #include <asm/setup.h> | |
36 | #include <asm/bootinfo.h> | |
37 | ||
38 | #ifdef CONFIG_MVME147_SCC | |
39 | #include <asm/mvme147hw.h> | |
40 | #endif | |
41 | #ifdef CONFIG_MVME162_SCC | |
42 | #include <asm/mvme16xhw.h> | |
43 | #endif | |
44 | #ifdef CONFIG_BVME6000_SCC | |
45 | #include <asm/bvme6000hw.h> | |
46 | #endif | |
47 | ||
48 | #include <linux/generic_serial.h> | |
49 | #include "scc.h" | |
50 | ||
51 | ||
52 | #define CHANNEL_A 0 | |
53 | #define CHANNEL_B 1 | |
54 | ||
55 | #define SCC_MINOR_BASE 64 | |
56 | ||
57 | /* Shadows for all SCC write registers */ | |
58 | static unsigned char scc_shadow[2][16]; | |
59 | ||
60 | /* Location to access for SCC register access delay */ | |
61 | static volatile unsigned char *scc_del = NULL; | |
62 | ||
63 | /* To keep track of STATUS_REG state for detection of Ext/Status int source */ | |
64 | static unsigned char scc_last_status_reg[2]; | |
65 | ||
66 | /***************************** Prototypes *****************************/ | |
67 | ||
68 | /* Function prototypes */ | |
69 | static void scc_disable_tx_interrupts(void * ptr); | |
70 | static void scc_enable_tx_interrupts(void * ptr); | |
71 | static void scc_disable_rx_interrupts(void * ptr); | |
72 | static void scc_enable_rx_interrupts(void * ptr); | |
73 | static int scc_get_CD(void * ptr); | |
74 | static void scc_shutdown_port(void * ptr); | |
75 | static int scc_set_real_termios(void *ptr); | |
76 | static void scc_hungup(void *ptr); | |
77 | static void scc_close(void *ptr); | |
78 | static int scc_chars_in_buffer(void * ptr); | |
79 | static int scc_open(struct tty_struct * tty, struct file * filp); | |
80 | static int scc_ioctl(struct tty_struct * tty, struct file * filp, | |
81 | unsigned int cmd, unsigned long arg); | |
82 | static void scc_throttle(struct tty_struct *tty); | |
83 | static void scc_unthrottle(struct tty_struct *tty); | |
84 | static irqreturn_t scc_tx_int(int irq, void *data, struct pt_regs *fp); | |
85 | static irqreturn_t scc_rx_int(int irq, void *data, struct pt_regs *fp); | |
86 | static irqreturn_t scc_stat_int(int irq, void *data, struct pt_regs *fp); | |
87 | static irqreturn_t scc_spcond_int(int irq, void *data, struct pt_regs *fp); | |
88 | static void scc_setsignals(struct scc_port *port, int dtr, int rts); | |
89 | static void scc_break_ctl(struct tty_struct *tty, int break_state); | |
90 | ||
91 | static struct tty_driver *scc_driver; | |
92 | ||
93 | struct scc_port scc_ports[2]; | |
94 | ||
95 | int scc_initialized = 0; | |
96 | ||
97 | /*--------------------------------------------------------------------------- | |
98 | * Interface from generic_serial.c back here | |
99 | *--------------------------------------------------------------------------*/ | |
100 | ||
101 | static struct real_driver scc_real_driver = { | |
102 | scc_disable_tx_interrupts, | |
103 | scc_enable_tx_interrupts, | |
104 | scc_disable_rx_interrupts, | |
105 | scc_enable_rx_interrupts, | |
106 | scc_get_CD, | |
107 | scc_shutdown_port, | |
108 | scc_set_real_termios, | |
109 | scc_chars_in_buffer, | |
110 | scc_close, | |
111 | scc_hungup, | |
112 | NULL | |
113 | }; | |
114 | ||
115 | ||
116 | static struct tty_operations scc_ops = { | |
117 | .open = scc_open, | |
118 | .close = gs_close, | |
119 | .write = gs_write, | |
120 | .put_char = gs_put_char, | |
121 | .flush_chars = gs_flush_chars, | |
122 | .write_room = gs_write_room, | |
123 | .chars_in_buffer = gs_chars_in_buffer, | |
124 | .flush_buffer = gs_flush_buffer, | |
125 | .ioctl = scc_ioctl, | |
126 | .throttle = scc_throttle, | |
127 | .unthrottle = scc_unthrottle, | |
128 | .set_termios = gs_set_termios, | |
129 | .stop = gs_stop, | |
130 | .start = gs_start, | |
131 | .hangup = gs_hangup, | |
132 | .break_ctl = scc_break_ctl, | |
133 | }; | |
134 | ||
135 | /*---------------------------------------------------------------------------- | |
136 | * vme_scc_init() and support functions | |
137 | *---------------------------------------------------------------------------*/ | |
138 | ||
139 | static int scc_init_drivers(void) | |
140 | { | |
141 | int error; | |
142 | ||
143 | scc_driver = alloc_tty_driver(2); | |
144 | if (!scc_driver) | |
145 | return -ENOMEM; | |
146 | scc_driver->owner = THIS_MODULE; | |
147 | scc_driver->driver_name = "scc"; | |
148 | scc_driver->name = "ttyS"; | |
1da177e4 LT |
149 | scc_driver->major = TTY_MAJOR; |
150 | scc_driver->minor_start = SCC_MINOR_BASE; | |
151 | scc_driver->type = TTY_DRIVER_TYPE_SERIAL; | |
152 | scc_driver->subtype = SERIAL_TYPE_NORMAL; | |
153 | scc_driver->init_termios = tty_std_termios; | |
154 | scc_driver->init_termios.c_cflag = | |
155 | B9600 | CS8 | CREAD | HUPCL | CLOCAL; | |
156 | scc_driver->flags = TTY_DRIVER_REAL_RAW; | |
157 | tty_set_operations(scc_driver, &scc_ops); | |
158 | ||
159 | if ((error = tty_register_driver(scc_driver))) { | |
160 | printk(KERN_ERR "scc: Couldn't register scc driver, error = %d\n", | |
161 | error); | |
162 | put_tty_driver(scc_driver); | |
163 | return 1; | |
164 | } | |
165 | ||
166 | return 0; | |
167 | } | |
168 | ||
169 | ||
170 | /* ports[] array is indexed by line no (i.e. [0] for ttyS0, [1] for ttyS1). | |
171 | */ | |
172 | ||
173 | static void scc_init_portstructs(void) | |
174 | { | |
175 | struct scc_port *port; | |
176 | int i; | |
177 | ||
178 | for (i = 0; i < 2; i++) { | |
179 | port = scc_ports + i; | |
180 | port->gs.magic = SCC_MAGIC; | |
181 | port->gs.close_delay = HZ/2; | |
182 | port->gs.closing_wait = 30 * HZ; | |
183 | port->gs.rd = &scc_real_driver; | |
184 | #ifdef NEW_WRITE_LOCKING | |
81861d78 | 185 | port->gs.port_write_mutex = MUTEX; |
1da177e4 LT |
186 | #endif |
187 | init_waitqueue_head(&port->gs.open_wait); | |
188 | init_waitqueue_head(&port->gs.close_wait); | |
189 | } | |
190 | } | |
191 | ||
192 | ||
193 | #ifdef CONFIG_MVME147_SCC | |
194 | static int mvme147_scc_init(void) | |
195 | { | |
196 | struct scc_port *port; | |
197 | ||
198 | printk(KERN_INFO "SCC: MVME147 Serial Driver\n"); | |
199 | /* Init channel A */ | |
200 | port = &scc_ports[0]; | |
201 | port->channel = CHANNEL_A; | |
202 | port->ctrlp = (volatile unsigned char *)M147_SCC_A_ADDR; | |
203 | port->datap = port->ctrlp + 1; | |
204 | port->port_a = &scc_ports[0]; | |
205 | port->port_b = &scc_ports[1]; | |
206 | request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, SA_INTERRUPT, | |
207 | "SCC-A TX", port); | |
208 | request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, SA_INTERRUPT, | |
209 | "SCC-A status", port); | |
210 | request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, SA_INTERRUPT, | |
211 | "SCC-A RX", port); | |
212 | request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, SA_INTERRUPT, | |
213 | "SCC-A special cond", port); | |
214 | { | |
215 | SCC_ACCESS_INIT(port); | |
216 | ||
217 | /* disable interrupts for this channel */ | |
218 | SCCwrite(INT_AND_DMA_REG, 0); | |
219 | /* Set the interrupt vector */ | |
220 | SCCwrite(INT_VECTOR_REG, MVME147_IRQ_SCC_BASE); | |
221 | /* Interrupt parameters: vector includes status, status low */ | |
222 | SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT); | |
223 | SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB); | |
224 | } | |
225 | ||
226 | /* Init channel B */ | |
227 | port = &scc_ports[1]; | |
228 | port->channel = CHANNEL_B; | |
229 | port->ctrlp = (volatile unsigned char *)M147_SCC_B_ADDR; | |
230 | port->datap = port->ctrlp + 1; | |
231 | port->port_a = &scc_ports[0]; | |
232 | port->port_b = &scc_ports[1]; | |
233 | request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, SA_INTERRUPT, | |
234 | "SCC-B TX", port); | |
235 | request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, SA_INTERRUPT, | |
236 | "SCC-B status", port); | |
237 | request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, SA_INTERRUPT, | |
238 | "SCC-B RX", port); | |
239 | request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, SA_INTERRUPT, | |
240 | "SCC-B special cond", port); | |
241 | { | |
242 | SCC_ACCESS_INIT(port); | |
243 | ||
244 | /* disable interrupts for this channel */ | |
245 | SCCwrite(INT_AND_DMA_REG, 0); | |
246 | } | |
247 | ||
248 | /* Ensure interrupts are enabled in the PCC chip */ | |
249 | m147_pcc->serial_cntrl=PCC_LEVEL_SERIAL|PCC_INT_ENAB; | |
250 | ||
251 | /* Initialise the tty driver structures and register */ | |
252 | scc_init_portstructs(); | |
253 | scc_init_drivers(); | |
254 | ||
255 | return 0; | |
256 | } | |
257 | #endif | |
258 | ||
259 | ||
260 | #ifdef CONFIG_MVME162_SCC | |
261 | static int mvme162_scc_init(void) | |
262 | { | |
263 | struct scc_port *port; | |
264 | ||
265 | if (!(mvme16x_config & MVME16x_CONFIG_GOT_SCCA)) | |
266 | return (-ENODEV); | |
267 | ||
268 | printk(KERN_INFO "SCC: MVME162 Serial Driver\n"); | |
269 | /* Init channel A */ | |
270 | port = &scc_ports[0]; | |
271 | port->channel = CHANNEL_A; | |
272 | port->ctrlp = (volatile unsigned char *)MVME_SCC_A_ADDR; | |
273 | port->datap = port->ctrlp + 2; | |
274 | port->port_a = &scc_ports[0]; | |
275 | port->port_b = &scc_ports[1]; | |
276 | request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, SA_INTERRUPT, | |
277 | "SCC-A TX", port); | |
278 | request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, SA_INTERRUPT, | |
279 | "SCC-A status", port); | |
280 | request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, SA_INTERRUPT, | |
281 | "SCC-A RX", port); | |
282 | request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, SA_INTERRUPT, | |
283 | "SCC-A special cond", port); | |
284 | { | |
285 | SCC_ACCESS_INIT(port); | |
286 | ||
287 | /* disable interrupts for this channel */ | |
288 | SCCwrite(INT_AND_DMA_REG, 0); | |
289 | /* Set the interrupt vector */ | |
290 | SCCwrite(INT_VECTOR_REG, MVME162_IRQ_SCC_BASE); | |
291 | /* Interrupt parameters: vector includes status, status low */ | |
292 | SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT); | |
293 | SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB); | |
294 | } | |
295 | ||
296 | /* Init channel B */ | |
297 | port = &scc_ports[1]; | |
298 | port->channel = CHANNEL_B; | |
299 | port->ctrlp = (volatile unsigned char *)MVME_SCC_B_ADDR; | |
300 | port->datap = port->ctrlp + 2; | |
301 | port->port_a = &scc_ports[0]; | |
302 | port->port_b = &scc_ports[1]; | |
303 | request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, SA_INTERRUPT, | |
304 | "SCC-B TX", port); | |
305 | request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, SA_INTERRUPT, | |
306 | "SCC-B status", port); | |
307 | request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, SA_INTERRUPT, | |
308 | "SCC-B RX", port); | |
309 | request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, SA_INTERRUPT, | |
310 | "SCC-B special cond", port); | |
311 | ||
312 | { | |
313 | SCC_ACCESS_INIT(port); /* Either channel will do */ | |
314 | ||
315 | /* disable interrupts for this channel */ | |
316 | SCCwrite(INT_AND_DMA_REG, 0); | |
317 | } | |
318 | ||
319 | /* Ensure interrupts are enabled in the MC2 chip */ | |
320 | *(volatile char *)0xfff4201d = 0x14; | |
321 | ||
322 | /* Initialise the tty driver structures and register */ | |
323 | scc_init_portstructs(); | |
324 | scc_init_drivers(); | |
325 | ||
326 | return 0; | |
327 | } | |
328 | #endif | |
329 | ||
330 | ||
331 | #ifdef CONFIG_BVME6000_SCC | |
332 | static int bvme6000_scc_init(void) | |
333 | { | |
334 | struct scc_port *port; | |
335 | ||
336 | printk(KERN_INFO "SCC: BVME6000 Serial Driver\n"); | |
337 | /* Init channel A */ | |
338 | port = &scc_ports[0]; | |
339 | port->channel = CHANNEL_A; | |
340 | port->ctrlp = (volatile unsigned char *)BVME_SCC_A_ADDR; | |
341 | port->datap = port->ctrlp + 4; | |
342 | port->port_a = &scc_ports[0]; | |
343 | port->port_b = &scc_ports[1]; | |
344 | request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, SA_INTERRUPT, | |
345 | "SCC-A TX", port); | |
346 | request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, SA_INTERRUPT, | |
347 | "SCC-A status", port); | |
348 | request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, SA_INTERRUPT, | |
349 | "SCC-A RX", port); | |
350 | request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int, SA_INTERRUPT, | |
351 | "SCC-A special cond", port); | |
352 | { | |
353 | SCC_ACCESS_INIT(port); | |
354 | ||
355 | /* disable interrupts for this channel */ | |
356 | SCCwrite(INT_AND_DMA_REG, 0); | |
357 | /* Set the interrupt vector */ | |
358 | SCCwrite(INT_VECTOR_REG, BVME_IRQ_SCC_BASE); | |
359 | /* Interrupt parameters: vector includes status, status low */ | |
360 | SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT); | |
361 | SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB); | |
362 | } | |
363 | ||
364 | /* Init channel B */ | |
365 | port = &scc_ports[1]; | |
366 | port->channel = CHANNEL_B; | |
367 | port->ctrlp = (volatile unsigned char *)BVME_SCC_B_ADDR; | |
368 | port->datap = port->ctrlp + 4; | |
369 | port->port_a = &scc_ports[0]; | |
370 | port->port_b = &scc_ports[1]; | |
371 | request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, SA_INTERRUPT, | |
372 | "SCC-B TX", port); | |
373 | request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, SA_INTERRUPT, | |
374 | "SCC-B status", port); | |
375 | request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, SA_INTERRUPT, | |
376 | "SCC-B RX", port); | |
377 | request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int, SA_INTERRUPT, | |
378 | "SCC-B special cond", port); | |
379 | ||
380 | { | |
381 | SCC_ACCESS_INIT(port); /* Either channel will do */ | |
382 | ||
383 | /* disable interrupts for this channel */ | |
384 | SCCwrite(INT_AND_DMA_REG, 0); | |
385 | } | |
386 | ||
387 | /* Initialise the tty driver structures and register */ | |
388 | scc_init_portstructs(); | |
389 | scc_init_drivers(); | |
390 | ||
391 | return 0; | |
392 | } | |
393 | #endif | |
394 | ||
395 | ||
396 | static int vme_scc_init(void) | |
397 | { | |
398 | int res = -ENODEV; | |
399 | ||
400 | #ifdef CONFIG_MVME147_SCC | |
401 | if (MACH_IS_MVME147) | |
402 | res = mvme147_scc_init(); | |
403 | #endif | |
404 | #ifdef CONFIG_MVME162_SCC | |
405 | if (MACH_IS_MVME16x) | |
406 | res = mvme162_scc_init(); | |
407 | #endif | |
408 | #ifdef CONFIG_BVME6000_SCC | |
409 | if (MACH_IS_BVME6000) | |
410 | res = bvme6000_scc_init(); | |
411 | #endif | |
412 | return res; | |
413 | } | |
414 | ||
415 | module_init(vme_scc_init); | |
416 | ||
417 | ||
418 | /*--------------------------------------------------------------------------- | |
419 | * Interrupt handlers | |
420 | *--------------------------------------------------------------------------*/ | |
421 | ||
422 | static irqreturn_t scc_rx_int(int irq, void *data, struct pt_regs *fp) | |
423 | { | |
424 | unsigned char ch; | |
425 | struct scc_port *port = data; | |
426 | struct tty_struct *tty = port->gs.tty; | |
427 | SCC_ACCESS_INIT(port); | |
428 | ||
429 | ch = SCCread_NB(RX_DATA_REG); | |
430 | if (!tty) { | |
431 | printk(KERN_WARNING "scc_rx_int with NULL tty!\n"); | |
432 | SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); | |
433 | return IRQ_HANDLED; | |
434 | } | |
33f0f88f | 435 | tty_insert_flip_char(tty, ch, 0); |
1da177e4 LT |
436 | |
437 | /* Check if another character is already ready; in that case, the | |
438 | * spcond_int() function must be used, because this character may have an | |
439 | * error condition that isn't signalled by the interrupt vector used! | |
440 | */ | |
441 | if (SCCread(INT_PENDING_REG) & | |
442 | (port->channel == CHANNEL_A ? IPR_A_RX : IPR_B_RX)) { | |
443 | scc_spcond_int (irq, data, fp); | |
444 | return IRQ_HANDLED; | |
445 | } | |
446 | ||
447 | SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); | |
448 | ||
449 | tty_flip_buffer_push(tty); | |
450 | return IRQ_HANDLED; | |
451 | } | |
452 | ||
453 | ||
454 | static irqreturn_t scc_spcond_int(int irq, void *data, struct pt_regs *fp) | |
455 | { | |
456 | struct scc_port *port = data; | |
457 | struct tty_struct *tty = port->gs.tty; | |
458 | unsigned char stat, ch, err; | |
459 | int int_pending_mask = port->channel == CHANNEL_A ? | |
460 | IPR_A_RX : IPR_B_RX; | |
461 | SCC_ACCESS_INIT(port); | |
462 | ||
463 | if (!tty) { | |
464 | printk(KERN_WARNING "scc_spcond_int with NULL tty!\n"); | |
465 | SCCwrite(COMMAND_REG, CR_ERROR_RESET); | |
466 | SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); | |
467 | return IRQ_HANDLED; | |
468 | } | |
469 | do { | |
470 | stat = SCCread(SPCOND_STATUS_REG); | |
471 | ch = SCCread_NB(RX_DATA_REG); | |
472 | ||
473 | if (stat & SCSR_RX_OVERRUN) | |
474 | err = TTY_OVERRUN; | |
475 | else if (stat & SCSR_PARITY_ERR) | |
476 | err = TTY_PARITY; | |
477 | else if (stat & SCSR_CRC_FRAME_ERR) | |
478 | err = TTY_FRAME; | |
479 | else | |
480 | err = 0; | |
481 | ||
33f0f88f | 482 | tty_insert_flip_char(tty, ch, err); |
1da177e4 LT |
483 | |
484 | /* ++TeSche: *All* errors have to be cleared manually, | |
485 | * else the condition persists for the next chars | |
486 | */ | |
487 | if (err) | |
488 | SCCwrite(COMMAND_REG, CR_ERROR_RESET); | |
489 | ||
490 | } while(SCCread(INT_PENDING_REG) & int_pending_mask); | |
491 | ||
492 | SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); | |
493 | ||
494 | tty_flip_buffer_push(tty); | |
495 | return IRQ_HANDLED; | |
496 | } | |
497 | ||
498 | ||
499 | static irqreturn_t scc_tx_int(int irq, void *data, struct pt_regs *fp) | |
500 | { | |
501 | struct scc_port *port = data; | |
502 | SCC_ACCESS_INIT(port); | |
503 | ||
504 | if (!port->gs.tty) { | |
505 | printk(KERN_WARNING "scc_tx_int with NULL tty!\n"); | |
506 | SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0); | |
507 | SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET); | |
508 | SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); | |
509 | return IRQ_HANDLED; | |
510 | } | |
511 | while ((SCCread_NB(STATUS_REG) & SR_TX_BUF_EMPTY)) { | |
512 | if (port->x_char) { | |
513 | SCCwrite(TX_DATA_REG, port->x_char); | |
514 | port->x_char = 0; | |
515 | } | |
516 | else if ((port->gs.xmit_cnt <= 0) || port->gs.tty->stopped || | |
517 | port->gs.tty->hw_stopped) | |
518 | break; | |
519 | else { | |
520 | SCCwrite(TX_DATA_REG, port->gs.xmit_buf[port->gs.xmit_tail++]); | |
521 | port->gs.xmit_tail = port->gs.xmit_tail & (SERIAL_XMIT_SIZE-1); | |
522 | if (--port->gs.xmit_cnt <= 0) | |
523 | break; | |
524 | } | |
525 | } | |
526 | if ((port->gs.xmit_cnt <= 0) || port->gs.tty->stopped || | |
527 | port->gs.tty->hw_stopped) { | |
528 | /* disable tx interrupts */ | |
529 | SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0); | |
530 | SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET); /* disable tx_int on next tx underrun? */ | |
531 | port->gs.flags &= ~GS_TX_INTEN; | |
532 | } | |
533 | if (port->gs.tty && port->gs.xmit_cnt <= port->gs.wakeup_chars) | |
534 | tty_wakeup(port->gs.tty); | |
535 | ||
536 | SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); | |
537 | return IRQ_HANDLED; | |
538 | } | |
539 | ||
540 | ||
541 | static irqreturn_t scc_stat_int(int irq, void *data, struct pt_regs *fp) | |
542 | { | |
543 | struct scc_port *port = data; | |
544 | unsigned channel = port->channel; | |
545 | unsigned char last_sr, sr, changed; | |
546 | SCC_ACCESS_INIT(port); | |
547 | ||
548 | last_sr = scc_last_status_reg[channel]; | |
549 | sr = scc_last_status_reg[channel] = SCCread_NB(STATUS_REG); | |
550 | changed = last_sr ^ sr; | |
551 | ||
552 | if (changed & SR_DCD) { | |
553 | port->c_dcd = !!(sr & SR_DCD); | |
554 | if (!(port->gs.flags & ASYNC_CHECK_CD)) | |
555 | ; /* Don't report DCD changes */ | |
556 | else if (port->c_dcd) { | |
557 | wake_up_interruptible(&port->gs.open_wait); | |
558 | } | |
559 | else { | |
560 | if (port->gs.tty) | |
561 | tty_hangup (port->gs.tty); | |
562 | } | |
563 | } | |
564 | SCCwrite(COMMAND_REG, CR_EXTSTAT_RESET); | |
565 | SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); | |
566 | return IRQ_HANDLED; | |
567 | } | |
568 | ||
569 | ||
570 | /*--------------------------------------------------------------------------- | |
571 | * generic_serial.c callback funtions | |
572 | *--------------------------------------------------------------------------*/ | |
573 | ||
574 | static void scc_disable_tx_interrupts(void *ptr) | |
575 | { | |
576 | struct scc_port *port = ptr; | |
577 | unsigned long flags; | |
578 | SCC_ACCESS_INIT(port); | |
579 | ||
580 | local_irq_save(flags); | |
581 | SCCmod(INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0); | |
582 | port->gs.flags &= ~GS_TX_INTEN; | |
583 | local_irq_restore(flags); | |
584 | } | |
585 | ||
586 | ||
587 | static void scc_enable_tx_interrupts(void *ptr) | |
588 | { | |
589 | struct scc_port *port = ptr; | |
590 | unsigned long flags; | |
591 | SCC_ACCESS_INIT(port); | |
592 | ||
593 | local_irq_save(flags); | |
594 | SCCmod(INT_AND_DMA_REG, 0xff, IDR_TX_INT_ENAB); | |
595 | /* restart the transmitter */ | |
596 | scc_tx_int (0, port, 0); | |
597 | local_irq_restore(flags); | |
598 | } | |
599 | ||
600 | ||
601 | static void scc_disable_rx_interrupts(void *ptr) | |
602 | { | |
603 | struct scc_port *port = ptr; | |
604 | unsigned long flags; | |
605 | SCC_ACCESS_INIT(port); | |
606 | ||
607 | local_irq_save(flags); | |
608 | SCCmod(INT_AND_DMA_REG, | |
609 | ~(IDR_RX_INT_MASK|IDR_PARERR_AS_SPCOND|IDR_EXTSTAT_INT_ENAB), 0); | |
610 | local_irq_restore(flags); | |
611 | } | |
612 | ||
613 | ||
614 | static void scc_enable_rx_interrupts(void *ptr) | |
615 | { | |
616 | struct scc_port *port = ptr; | |
617 | unsigned long flags; | |
618 | SCC_ACCESS_INIT(port); | |
619 | ||
620 | local_irq_save(flags); | |
621 | SCCmod(INT_AND_DMA_REG, 0xff, | |
622 | IDR_EXTSTAT_INT_ENAB|IDR_PARERR_AS_SPCOND|IDR_RX_INT_ALL); | |
623 | local_irq_restore(flags); | |
624 | } | |
625 | ||
626 | ||
627 | static int scc_get_CD(void *ptr) | |
628 | { | |
629 | struct scc_port *port = ptr; | |
630 | unsigned channel = port->channel; | |
631 | ||
632 | return !!(scc_last_status_reg[channel] & SR_DCD); | |
633 | } | |
634 | ||
635 | ||
636 | static void scc_shutdown_port(void *ptr) | |
637 | { | |
638 | struct scc_port *port = ptr; | |
639 | ||
640 | port->gs.flags &= ~ GS_ACTIVE; | |
641 | if (port->gs.tty && port->gs.tty->termios->c_cflag & HUPCL) { | |
642 | scc_setsignals (port, 0, 0); | |
643 | } | |
644 | } | |
645 | ||
646 | ||
647 | static int scc_set_real_termios (void *ptr) | |
648 | { | |
649 | /* the SCC has char sizes 5,7,6,8 in that order! */ | |
650 | static int chsize_map[4] = { 0, 2, 1, 3 }; | |
651 | unsigned cflag, baud, chsize, channel, brgval = 0; | |
652 | unsigned long flags; | |
653 | struct scc_port *port = ptr; | |
654 | SCC_ACCESS_INIT(port); | |
655 | ||
656 | if (!port->gs.tty || !port->gs.tty->termios) return 0; | |
657 | ||
658 | channel = port->channel; | |
659 | ||
660 | if (channel == CHANNEL_A) | |
661 | return 0; /* Settings controlled by boot PROM */ | |
662 | ||
663 | cflag = port->gs.tty->termios->c_cflag; | |
664 | baud = port->gs.baud; | |
665 | chsize = (cflag & CSIZE) >> 4; | |
666 | ||
667 | if (baud == 0) { | |
668 | /* speed == 0 -> drop DTR */ | |
669 | local_irq_save(flags); | |
670 | SCCmod(TX_CTRL_REG, ~TCR_DTR, 0); | |
671 | local_irq_restore(flags); | |
672 | return 0; | |
673 | } | |
674 | else if ((MACH_IS_MVME16x && (baud < 50 || baud > 38400)) || | |
675 | (MACH_IS_MVME147 && (baud < 50 || baud > 19200)) || | |
676 | (MACH_IS_BVME6000 &&(baud < 50 || baud > 76800))) { | |
677 | printk(KERN_NOTICE "SCC: Bad speed requested, %d\n", baud); | |
678 | return 0; | |
679 | } | |
680 | ||
681 | if (cflag & CLOCAL) | |
682 | port->gs.flags &= ~ASYNC_CHECK_CD; | |
683 | else | |
684 | port->gs.flags |= ASYNC_CHECK_CD; | |
685 | ||
686 | #ifdef CONFIG_MVME147_SCC | |
687 | if (MACH_IS_MVME147) | |
688 | brgval = (M147_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2; | |
689 | #endif | |
690 | #ifdef CONFIG_MVME162_SCC | |
691 | if (MACH_IS_MVME16x) | |
692 | brgval = (MVME_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2; | |
693 | #endif | |
694 | #ifdef CONFIG_BVME6000_SCC | |
695 | if (MACH_IS_BVME6000) | |
696 | brgval = (BVME_SCC_RTxC + baud/2) / (16 * 2 * baud) - 2; | |
697 | #endif | |
698 | /* Now we have all parameters and can go to set them: */ | |
699 | local_irq_save(flags); | |
700 | ||
701 | /* receiver's character size and auto-enables */ | |
702 | SCCmod(RX_CTRL_REG, ~(RCR_CHSIZE_MASK|RCR_AUTO_ENAB_MODE), | |
703 | (chsize_map[chsize] << 6) | | |
704 | ((cflag & CRTSCTS) ? RCR_AUTO_ENAB_MODE : 0)); | |
705 | /* parity and stop bits (both, Tx and Rx), clock mode never changes */ | |
706 | SCCmod (AUX1_CTRL_REG, | |
707 | ~(A1CR_PARITY_MASK | A1CR_MODE_MASK), | |
708 | ((cflag & PARENB | |
709 | ? (cflag & PARODD ? A1CR_PARITY_ODD : A1CR_PARITY_EVEN) | |
710 | : A1CR_PARITY_NONE) | |
711 | | (cflag & CSTOPB ? A1CR_MODE_ASYNC_2 : A1CR_MODE_ASYNC_1))); | |
712 | /* sender's character size, set DTR for valid baud rate */ | |
713 | SCCmod(TX_CTRL_REG, ~TCR_CHSIZE_MASK, chsize_map[chsize] << 5 | TCR_DTR); | |
714 | /* clock sources never change */ | |
715 | /* disable BRG before changing the value */ | |
716 | SCCmod(DPLL_CTRL_REG, ~DCR_BRG_ENAB, 0); | |
717 | /* BRG value */ | |
718 | SCCwrite(TIMER_LOW_REG, brgval & 0xff); | |
719 | SCCwrite(TIMER_HIGH_REG, (brgval >> 8) & 0xff); | |
720 | /* BRG enable, and clock source never changes */ | |
721 | SCCmod(DPLL_CTRL_REG, 0xff, DCR_BRG_ENAB); | |
722 | ||
723 | local_irq_restore(flags); | |
724 | ||
725 | return 0; | |
726 | } | |
727 | ||
728 | ||
729 | static int scc_chars_in_buffer (void *ptr) | |
730 | { | |
731 | struct scc_port *port = ptr; | |
732 | SCC_ACCESS_INIT(port); | |
733 | ||
734 | return (SCCread (SPCOND_STATUS_REG) & SCSR_ALL_SENT) ? 0 : 1; | |
735 | } | |
736 | ||
737 | ||
738 | /* Comment taken from sx.c (2.4.0): | |
739 | I haven't the foggiest why the decrement use count has to happen | |
740 | here. The whole linux serial drivers stuff needs to be redesigned. | |
741 | My guess is that this is a hack to minimize the impact of a bug | |
742 | elsewhere. Thinking about it some more. (try it sometime) Try | |
743 | running minicom on a serial port that is driven by a modularized | |
744 | driver. Have the modem hangup. Then remove the driver module. Then | |
745 | exit minicom. I expect an "oops". -- REW */ | |
746 | ||
747 | static void scc_hungup(void *ptr) | |
748 | { | |
749 | scc_disable_tx_interrupts(ptr); | |
750 | scc_disable_rx_interrupts(ptr); | |
751 | } | |
752 | ||
753 | ||
754 | static void scc_close(void *ptr) | |
755 | { | |
756 | scc_disable_tx_interrupts(ptr); | |
757 | scc_disable_rx_interrupts(ptr); | |
758 | } | |
759 | ||
760 | ||
761 | /*--------------------------------------------------------------------------- | |
762 | * Internal support functions | |
763 | *--------------------------------------------------------------------------*/ | |
764 | ||
765 | static void scc_setsignals(struct scc_port *port, int dtr, int rts) | |
766 | { | |
767 | unsigned long flags; | |
768 | unsigned char t; | |
769 | SCC_ACCESS_INIT(port); | |
770 | ||
771 | local_irq_save(flags); | |
772 | t = SCCread(TX_CTRL_REG); | |
773 | if (dtr >= 0) t = dtr? (t | TCR_DTR): (t & ~TCR_DTR); | |
774 | if (rts >= 0) t = rts? (t | TCR_RTS): (t & ~TCR_RTS); | |
775 | SCCwrite(TX_CTRL_REG, t); | |
776 | local_irq_restore(flags); | |
777 | } | |
778 | ||
779 | ||
780 | static void scc_send_xchar(struct tty_struct *tty, char ch) | |
781 | { | |
782 | struct scc_port *port = (struct scc_port *)tty->driver_data; | |
783 | ||
784 | port->x_char = ch; | |
785 | if (ch) | |
786 | scc_enable_tx_interrupts(port); | |
787 | } | |
788 | ||
789 | ||
790 | /*--------------------------------------------------------------------------- | |
791 | * Driver entrypoints referenced from above | |
792 | *--------------------------------------------------------------------------*/ | |
793 | ||
794 | static int scc_open (struct tty_struct * tty, struct file * filp) | |
795 | { | |
796 | int line = tty->index; | |
797 | int retval; | |
798 | struct scc_port *port = &scc_ports[line]; | |
799 | int i, channel = port->channel; | |
800 | unsigned long flags; | |
801 | SCC_ACCESS_INIT(port); | |
802 | #if defined(CONFIG_MVME162_SCC) || defined(CONFIG_MVME147_SCC) | |
803 | static const struct { | |
804 | unsigned reg, val; | |
805 | } mvme_init_tab[] = { | |
806 | /* Values for MVME162 and MVME147 */ | |
807 | /* no parity, 1 stop bit, async, 1:16 */ | |
808 | { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 }, | |
809 | /* parity error is special cond, ints disabled, no DMA */ | |
810 | { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB }, | |
811 | /* Rx 8 bits/char, no auto enable, Rx off */ | |
812 | { RX_CTRL_REG, RCR_CHSIZE_8 }, | |
813 | /* DTR off, Tx 8 bits/char, RTS off, Tx off */ | |
814 | { TX_CTRL_REG, TCR_CHSIZE_8 }, | |
815 | /* special features off */ | |
816 | { AUX2_CTRL_REG, 0 }, | |
817 | { CLK_CTRL_REG, CCR_RXCLK_BRG | CCR_TXCLK_BRG }, | |
818 | { DPLL_CTRL_REG, DCR_BRG_ENAB | DCR_BRG_USE_PCLK }, | |
819 | /* Start Rx */ | |
820 | { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 }, | |
821 | /* Start Tx */ | |
822 | { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 }, | |
823 | /* Ext/Stat ints: DCD only */ | |
824 | { INT_CTRL_REG, ICR_ENAB_DCD_INT }, | |
825 | /* Reset Ext/Stat ints */ | |
826 | { COMMAND_REG, CR_EXTSTAT_RESET }, | |
827 | /* ...again */ | |
828 | { COMMAND_REG, CR_EXTSTAT_RESET }, | |
829 | }; | |
830 | #endif | |
831 | #if defined(CONFIG_BVME6000_SCC) | |
832 | static const struct { | |
833 | unsigned reg, val; | |
834 | } bvme_init_tab[] = { | |
835 | /* Values for BVME6000 */ | |
836 | /* no parity, 1 stop bit, async, 1:16 */ | |
837 | { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 }, | |
838 | /* parity error is special cond, ints disabled, no DMA */ | |
839 | { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB }, | |
840 | /* Rx 8 bits/char, no auto enable, Rx off */ | |
841 | { RX_CTRL_REG, RCR_CHSIZE_8 }, | |
842 | /* DTR off, Tx 8 bits/char, RTS off, Tx off */ | |
843 | { TX_CTRL_REG, TCR_CHSIZE_8 }, | |
844 | /* special features off */ | |
845 | { AUX2_CTRL_REG, 0 }, | |
846 | { CLK_CTRL_REG, CCR_RTxC_XTAL | CCR_RXCLK_BRG | CCR_TXCLK_BRG }, | |
847 | { DPLL_CTRL_REG, DCR_BRG_ENAB }, | |
848 | /* Start Rx */ | |
849 | { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 }, | |
850 | /* Start Tx */ | |
851 | { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 }, | |
852 | /* Ext/Stat ints: DCD only */ | |
853 | { INT_CTRL_REG, ICR_ENAB_DCD_INT }, | |
854 | /* Reset Ext/Stat ints */ | |
855 | { COMMAND_REG, CR_EXTSTAT_RESET }, | |
856 | /* ...again */ | |
857 | { COMMAND_REG, CR_EXTSTAT_RESET }, | |
858 | }; | |
859 | #endif | |
860 | if (!(port->gs.flags & ASYNC_INITIALIZED)) { | |
861 | local_irq_save(flags); | |
862 | #if defined(CONFIG_MVME147_SCC) || defined(CONFIG_MVME162_SCC) | |
863 | if (MACH_IS_MVME147 || MACH_IS_MVME16x) { | |
fe971071 | 864 | for (i = 0; i < ARRAY_SIZE(mvme_init_tab); ++i) |
1da177e4 LT |
865 | SCCwrite(mvme_init_tab[i].reg, mvme_init_tab[i].val); |
866 | } | |
867 | #endif | |
868 | #if defined(CONFIG_BVME6000_SCC) | |
869 | if (MACH_IS_BVME6000) { | |
fe971071 | 870 | for (i = 0; i < ARRAY_SIZE(bvme_init_tab); ++i) |
1da177e4 LT |
871 | SCCwrite(bvme_init_tab[i].reg, bvme_init_tab[i].val); |
872 | } | |
873 | #endif | |
874 | ||
875 | /* remember status register for detection of DCD and CTS changes */ | |
876 | scc_last_status_reg[channel] = SCCread(STATUS_REG); | |
877 | ||
878 | port->c_dcd = 0; /* Prevent initial 1->0 interrupt */ | |
879 | scc_setsignals (port, 1,1); | |
880 | local_irq_restore(flags); | |
881 | } | |
882 | ||
883 | tty->driver_data = port; | |
884 | port->gs.tty = tty; | |
885 | port->gs.count++; | |
886 | retval = gs_init_port(&port->gs); | |
887 | if (retval) { | |
888 | port->gs.count--; | |
889 | return retval; | |
890 | } | |
891 | port->gs.flags |= GS_ACTIVE; | |
892 | retval = gs_block_til_ready(port, filp); | |
893 | ||
894 | if (retval) { | |
895 | port->gs.count--; | |
896 | return retval; | |
897 | } | |
898 | ||
899 | port->c_dcd = scc_get_CD (port); | |
900 | ||
901 | scc_enable_rx_interrupts(port); | |
902 | ||
903 | return 0; | |
904 | } | |
905 | ||
906 | ||
907 | static void scc_throttle (struct tty_struct * tty) | |
908 | { | |
909 | struct scc_port *port = (struct scc_port *)tty->driver_data; | |
910 | unsigned long flags; | |
911 | SCC_ACCESS_INIT(port); | |
912 | ||
913 | if (tty->termios->c_cflag & CRTSCTS) { | |
914 | local_irq_save(flags); | |
915 | SCCmod(TX_CTRL_REG, ~TCR_RTS, 0); | |
916 | local_irq_restore(flags); | |
917 | } | |
918 | if (I_IXOFF(tty)) | |
919 | scc_send_xchar(tty, STOP_CHAR(tty)); | |
920 | } | |
921 | ||
922 | ||
923 | static void scc_unthrottle (struct tty_struct * tty) | |
924 | { | |
925 | struct scc_port *port = (struct scc_port *)tty->driver_data; | |
926 | unsigned long flags; | |
927 | SCC_ACCESS_INIT(port); | |
928 | ||
929 | if (tty->termios->c_cflag & CRTSCTS) { | |
930 | local_irq_save(flags); | |
931 | SCCmod(TX_CTRL_REG, 0xff, TCR_RTS); | |
932 | local_irq_restore(flags); | |
933 | } | |
934 | if (I_IXOFF(tty)) | |
935 | scc_send_xchar(tty, START_CHAR(tty)); | |
936 | } | |
937 | ||
938 | ||
939 | static int scc_ioctl(struct tty_struct *tty, struct file *file, | |
940 | unsigned int cmd, unsigned long arg) | |
941 | { | |
942 | return -ENOIOCTLCMD; | |
943 | } | |
944 | ||
945 | ||
946 | static void scc_break_ctl(struct tty_struct *tty, int break_state) | |
947 | { | |
948 | struct scc_port *port = (struct scc_port *)tty->driver_data; | |
949 | unsigned long flags; | |
950 | SCC_ACCESS_INIT(port); | |
951 | ||
952 | local_irq_save(flags); | |
953 | SCCmod(TX_CTRL_REG, ~TCR_SEND_BREAK, | |
954 | break_state ? TCR_SEND_BREAK : 0); | |
955 | local_irq_restore(flags); | |
956 | } | |
957 | ||
958 | ||
959 | /*--------------------------------------------------------------------------- | |
960 | * Serial console stuff... | |
961 | *--------------------------------------------------------------------------*/ | |
962 | ||
963 | #define scc_delay() do { __asm__ __volatile__ (" nop; nop"); } while (0) | |
964 | ||
965 | static void scc_ch_write (char ch) | |
966 | { | |
967 | volatile char *p = NULL; | |
968 | ||
969 | #ifdef CONFIG_MVME147_SCC | |
970 | if (MACH_IS_MVME147) | |
971 | p = (volatile char *)M147_SCC_A_ADDR; | |
972 | #endif | |
973 | #ifdef CONFIG_MVME162_SCC | |
974 | if (MACH_IS_MVME16x) | |
975 | p = (volatile char *)MVME_SCC_A_ADDR; | |
976 | #endif | |
977 | #ifdef CONFIG_BVME6000_SCC | |
978 | if (MACH_IS_BVME6000) | |
979 | p = (volatile char *)BVME_SCC_A_ADDR; | |
980 | #endif | |
981 | ||
982 | do { | |
983 | scc_delay(); | |
984 | } | |
985 | while (!(*p & 4)); | |
986 | scc_delay(); | |
987 | *p = 8; | |
988 | scc_delay(); | |
989 | *p = ch; | |
990 | } | |
991 | ||
992 | /* The console must be locked when we get here. */ | |
993 | ||
994 | static void scc_console_write (struct console *co, const char *str, unsigned count) | |
995 | { | |
996 | unsigned long flags; | |
997 | ||
998 | local_irq_save(flags); | |
999 | ||
1000 | while (count--) | |
1001 | { | |
1002 | if (*str == '\n') | |
1003 | scc_ch_write ('\r'); | |
1004 | scc_ch_write (*str++); | |
1005 | } | |
1006 | local_irq_restore(flags); | |
1007 | } | |
1008 | ||
1009 | static struct tty_driver *scc_console_device(struct console *c, int *index) | |
1010 | { | |
1011 | *index = c->index; | |
1012 | return scc_driver; | |
1013 | } | |
1014 | ||
1015 | ||
1016 | static int __init scc_console_setup(struct console *co, char *options) | |
1017 | { | |
1018 | return 0; | |
1019 | } | |
1020 | ||
1021 | ||
1022 | static struct console sercons = { | |
1023 | .name = "ttyS", | |
1024 | .write = scc_console_write, | |
1025 | .device = scc_console_device, | |
1026 | .setup = scc_console_setup, | |
1027 | .flags = CON_PRINTBUFFER, | |
1028 | .index = -1, | |
1029 | }; | |
1030 | ||
1031 | ||
1032 | static int __init vme_scc_console_init(void) | |
1033 | { | |
1034 | if (vme_brdtype == VME_TYPE_MVME147 || | |
1035 | vme_brdtype == VME_TYPE_MVME162 || | |
1036 | vme_brdtype == VME_TYPE_MVME172 || | |
1037 | vme_brdtype == VME_TYPE_BVME4000 || | |
1038 | vme_brdtype == VME_TYPE_BVME6000) | |
1039 | register_console(&sercons); | |
1040 | return 0; | |
1041 | } | |
1042 | console_initcall(vme_scc_console_init); |