Commit | Line | Data |
---|---|---|
9fe757b0 JC |
1 | /* Copyright (C) 2004-2006, Advanced Micro Devices, Inc. |
2 | * | |
3 | * This program is free software; you can redistribute it and/or modify | |
4 | * it under the terms of the GNU General Public License as published by | |
5 | * the Free Software Foundation; either version 2 of the License, or | |
6 | * (at your option) any later version. | |
7 | */ | |
8 | ||
9 | #include <linux/module.h> | |
10 | #include <linux/kernel.h> | |
9fe757b0 JC |
11 | #include <linux/pci.h> |
12 | #include <linux/pci_ids.h> | |
13 | #include <linux/crypto.h> | |
14 | #include <linux/spinlock.h> | |
15 | #include <crypto/algapi.h> | |
16 | ||
17 | #include <asm/io.h> | |
18 | #include <asm/delay.h> | |
19 | ||
20 | #include "geode-aes.h" | |
21 | ||
22 | /* Register definitions */ | |
23 | ||
24 | #define AES_CTRLA_REG 0x0000 | |
25 | ||
26 | #define AES_CTRL_START 0x01 | |
27 | #define AES_CTRL_DECRYPT 0x00 | |
28 | #define AES_CTRL_ENCRYPT 0x02 | |
29 | #define AES_CTRL_WRKEY 0x04 | |
30 | #define AES_CTRL_DCA 0x08 | |
31 | #define AES_CTRL_SCA 0x10 | |
32 | #define AES_CTRL_CBC 0x20 | |
33 | ||
34 | #define AES_INTR_REG 0x0008 | |
35 | ||
36 | #define AES_INTRA_PENDING (1 << 16) | |
37 | #define AES_INTRB_PENDING (1 << 17) | |
38 | ||
39 | #define AES_INTR_PENDING (AES_INTRA_PENDING | AES_INTRB_PENDING) | |
40 | #define AES_INTR_MASK 0x07 | |
41 | ||
42 | #define AES_SOURCEA_REG 0x0010 | |
43 | #define AES_DSTA_REG 0x0014 | |
44 | #define AES_LENA_REG 0x0018 | |
45 | #define AES_WRITEKEY0_REG 0x0030 | |
46 | #define AES_WRITEIV0_REG 0x0040 | |
47 | ||
48 | /* A very large counter that is used to gracefully bail out of an | |
49 | * operation in case of trouble | |
50 | */ | |
51 | ||
52 | #define AES_OP_TIMEOUT 0x50000 | |
53 | ||
54 | /* Static structures */ | |
55 | ||
56 | static void __iomem * _iobase; | |
57 | static spinlock_t lock; | |
58 | ||
59 | /* Write a 128 bit field (either a writable key or IV) */ | |
60 | static inline void | |
61 | _writefield(u32 offset, void *value) | |
62 | { | |
63 | int i; | |
64 | for(i = 0; i < 4; i++) | |
65 | iowrite32(((u32 *) value)[i], _iobase + offset + (i * 4)); | |
66 | } | |
67 | ||
68 | /* Read a 128 bit field (either a writable key or IV) */ | |
69 | static inline void | |
70 | _readfield(u32 offset, void *value) | |
71 | { | |
72 | int i; | |
73 | for(i = 0; i < 4; i++) | |
74 | ((u32 *) value)[i] = ioread32(_iobase + offset + (i * 4)); | |
75 | } | |
76 | ||
77 | static int | |
78 | do_crypt(void *src, void *dst, int len, u32 flags) | |
79 | { | |
80 | u32 status; | |
81 | u32 counter = AES_OP_TIMEOUT; | |
82 | ||
83 | iowrite32(virt_to_phys(src), _iobase + AES_SOURCEA_REG); | |
84 | iowrite32(virt_to_phys(dst), _iobase + AES_DSTA_REG); | |
85 | iowrite32(len, _iobase + AES_LENA_REG); | |
86 | ||
87 | /* Start the operation */ | |
88 | iowrite32(AES_CTRL_START | flags, _iobase + AES_CTRLA_REG); | |
89 | ||
90 | do | |
91 | status = ioread32(_iobase + AES_INTR_REG); | |
92 | while(!(status & AES_INTRA_PENDING) && --counter); | |
93 | ||
94 | /* Clear the event */ | |
95 | iowrite32((status & 0xFF) | AES_INTRA_PENDING, _iobase + AES_INTR_REG); | |
96 | return counter ? 0 : 1; | |
97 | } | |
98 | ||
ab782705 | 99 | static unsigned int |
9fe757b0 JC |
100 | geode_aes_crypt(struct geode_aes_op *op) |
101 | { | |
9fe757b0 | 102 | u32 flags = 0; |
5efee174 | 103 | unsigned long iflags; |
9fe757b0 | 104 | |
761e7846 | 105 | if (op->len == 0) |
9fe757b0 JC |
106 | return 0; |
107 | ||
761e7846 JC |
108 | /* If the source and destination is the same, then |
109 | * we need to turn on the coherent flags, otherwise | |
110 | * we don't need to worry | |
111 | */ | |
112 | ||
2e21630d | 113 | flags |= (AES_CTRL_DCA | AES_CTRL_SCA); |
9fe757b0 JC |
114 | |
115 | if (op->dir == AES_DIR_ENCRYPT) | |
116 | flags |= AES_CTRL_ENCRYPT; | |
117 | ||
118 | /* Start the critical section */ | |
119 | ||
120 | spin_lock_irqsave(&lock, iflags); | |
121 | ||
122 | if (op->mode == AES_MODE_CBC) { | |
123 | flags |= AES_CTRL_CBC; | |
124 | _writefield(AES_WRITEIV0_REG, op->iv); | |
125 | } | |
126 | ||
761e7846 | 127 | if (!(op->flags & AES_FLAGS_HIDDENKEY)) { |
9fe757b0 JC |
128 | flags |= AES_CTRL_WRKEY; |
129 | _writefield(AES_WRITEKEY0_REG, op->key); | |
130 | } | |
131 | ||
132 | do_crypt(op->src, op->dst, op->len, flags); | |
133 | ||
134 | if (op->mode == AES_MODE_CBC) | |
135 | _readfield(AES_WRITEIV0_REG, op->iv); | |
136 | ||
137 | spin_unlock_irqrestore(&lock, iflags); | |
138 | ||
139 | return op->len; | |
140 | } | |
141 | ||
142 | /* CRYPTO-API Functions */ | |
143 | ||
144 | static int | |
145 | geode_setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int len) | |
146 | { | |
147 | struct geode_aes_op *op = crypto_tfm_ctx(tfm); | |
148 | ||
149 | if (len != AES_KEY_LENGTH) { | |
150 | tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; | |
151 | return -EINVAL; | |
152 | } | |
153 | ||
154 | memcpy(op->key, key, len); | |
155 | return 0; | |
156 | } | |
157 | ||
158 | static void | |
159 | geode_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) | |
160 | { | |
161 | struct geode_aes_op *op = crypto_tfm_ctx(tfm); | |
162 | ||
163 | if ((out == NULL) || (in == NULL)) | |
164 | return; | |
165 | ||
166 | op->src = (void *) in; | |
167 | op->dst = (void *) out; | |
168 | op->mode = AES_MODE_ECB; | |
169 | op->flags = 0; | |
170 | op->len = AES_MIN_BLOCK_SIZE; | |
171 | op->dir = AES_DIR_ENCRYPT; | |
172 | ||
173 | geode_aes_crypt(op); | |
174 | } | |
175 | ||
176 | ||
177 | static void | |
178 | geode_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) | |
179 | { | |
180 | struct geode_aes_op *op = crypto_tfm_ctx(tfm); | |
181 | ||
182 | if ((out == NULL) || (in == NULL)) | |
183 | return; | |
184 | ||
185 | op->src = (void *) in; | |
186 | op->dst = (void *) out; | |
187 | op->mode = AES_MODE_ECB; | |
188 | op->flags = 0; | |
189 | op->len = AES_MIN_BLOCK_SIZE; | |
190 | op->dir = AES_DIR_DECRYPT; | |
191 | ||
192 | geode_aes_crypt(op); | |
193 | } | |
194 | ||
195 | ||
196 | static struct crypto_alg geode_alg = { | |
197 | .cra_name = "aes", | |
198 | .cra_driver_name = "geode-aes-128", | |
199 | .cra_priority = 300, | |
200 | .cra_alignmask = 15, | |
201 | .cra_flags = CRYPTO_ALG_TYPE_CIPHER, | |
202 | .cra_blocksize = AES_MIN_BLOCK_SIZE, | |
203 | .cra_ctxsize = sizeof(struct geode_aes_op), | |
204 | .cra_module = THIS_MODULE, | |
205 | .cra_list = LIST_HEAD_INIT(geode_alg.cra_list), | |
206 | .cra_u = { | |
207 | .cipher = { | |
208 | .cia_min_keysize = AES_KEY_LENGTH, | |
209 | .cia_max_keysize = AES_KEY_LENGTH, | |
210 | .cia_setkey = geode_setkey, | |
211 | .cia_encrypt = geode_encrypt, | |
212 | .cia_decrypt = geode_decrypt | |
213 | } | |
214 | } | |
215 | }; | |
216 | ||
217 | static int | |
218 | geode_cbc_decrypt(struct blkcipher_desc *desc, | |
219 | struct scatterlist *dst, struct scatterlist *src, | |
220 | unsigned int nbytes) | |
221 | { | |
222 | struct geode_aes_op *op = crypto_blkcipher_ctx(desc->tfm); | |
223 | struct blkcipher_walk walk; | |
224 | int err, ret; | |
225 | ||
226 | blkcipher_walk_init(&walk, dst, src, nbytes); | |
227 | err = blkcipher_walk_virt(desc, &walk); | |
228 | ||
229 | while((nbytes = walk.nbytes)) { | |
230 | op->src = walk.src.virt.addr, | |
231 | op->dst = walk.dst.virt.addr; | |
232 | op->mode = AES_MODE_CBC; | |
233 | op->len = nbytes - (nbytes % AES_MIN_BLOCK_SIZE); | |
234 | op->dir = AES_DIR_DECRYPT; | |
235 | ||
236 | memcpy(op->iv, walk.iv, AES_IV_LENGTH); | |
237 | ||
238 | ret = geode_aes_crypt(op); | |
239 | ||
240 | memcpy(walk.iv, op->iv, AES_IV_LENGTH); | |
241 | nbytes -= ret; | |
242 | ||
243 | err = blkcipher_walk_done(desc, &walk, nbytes); | |
244 | } | |
245 | ||
246 | return err; | |
247 | } | |
248 | ||
249 | static int | |
250 | geode_cbc_encrypt(struct blkcipher_desc *desc, | |
251 | struct scatterlist *dst, struct scatterlist *src, | |
252 | unsigned int nbytes) | |
253 | { | |
254 | struct geode_aes_op *op = crypto_blkcipher_ctx(desc->tfm); | |
255 | struct blkcipher_walk walk; | |
256 | int err, ret; | |
257 | ||
258 | blkcipher_walk_init(&walk, dst, src, nbytes); | |
259 | err = blkcipher_walk_virt(desc, &walk); | |
260 | ||
261 | while((nbytes = walk.nbytes)) { | |
262 | op->src = walk.src.virt.addr, | |
263 | op->dst = walk.dst.virt.addr; | |
264 | op->mode = AES_MODE_CBC; | |
265 | op->len = nbytes - (nbytes % AES_MIN_BLOCK_SIZE); | |
266 | op->dir = AES_DIR_ENCRYPT; | |
267 | ||
268 | memcpy(op->iv, walk.iv, AES_IV_LENGTH); | |
269 | ||
270 | ret = geode_aes_crypt(op); | |
271 | nbytes -= ret; | |
272 | err = blkcipher_walk_done(desc, &walk, nbytes); | |
273 | } | |
274 | ||
275 | return err; | |
276 | } | |
277 | ||
278 | static struct crypto_alg geode_cbc_alg = { | |
279 | .cra_name = "cbc(aes)", | |
280 | .cra_driver_name = "cbc-aes-geode-128", | |
281 | .cra_priority = 400, | |
282 | .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, | |
283 | .cra_blocksize = AES_MIN_BLOCK_SIZE, | |
284 | .cra_ctxsize = sizeof(struct geode_aes_op), | |
285 | .cra_alignmask = 15, | |
286 | .cra_type = &crypto_blkcipher_type, | |
287 | .cra_module = THIS_MODULE, | |
288 | .cra_list = LIST_HEAD_INIT(geode_cbc_alg.cra_list), | |
289 | .cra_u = { | |
290 | .blkcipher = { | |
291 | .min_keysize = AES_KEY_LENGTH, | |
292 | .max_keysize = AES_KEY_LENGTH, | |
293 | .setkey = geode_setkey, | |
294 | .encrypt = geode_cbc_encrypt, | |
295 | .decrypt = geode_cbc_decrypt, | |
761e7846 | 296 | .ivsize = AES_IV_LENGTH, |
9fe757b0 JC |
297 | } |
298 | } | |
299 | }; | |
300 | ||
301 | static int | |
302 | geode_ecb_decrypt(struct blkcipher_desc *desc, | |
303 | struct scatterlist *dst, struct scatterlist *src, | |
304 | unsigned int nbytes) | |
305 | { | |
306 | struct geode_aes_op *op = crypto_blkcipher_ctx(desc->tfm); | |
307 | struct blkcipher_walk walk; | |
308 | int err, ret; | |
309 | ||
310 | blkcipher_walk_init(&walk, dst, src, nbytes); | |
311 | err = blkcipher_walk_virt(desc, &walk); | |
312 | ||
313 | while((nbytes = walk.nbytes)) { | |
314 | op->src = walk.src.virt.addr, | |
315 | op->dst = walk.dst.virt.addr; | |
316 | op->mode = AES_MODE_ECB; | |
317 | op->len = nbytes - (nbytes % AES_MIN_BLOCK_SIZE); | |
318 | op->dir = AES_DIR_DECRYPT; | |
319 | ||
320 | ret = geode_aes_crypt(op); | |
321 | nbytes -= ret; | |
322 | err = blkcipher_walk_done(desc, &walk, nbytes); | |
323 | } | |
324 | ||
325 | return err; | |
326 | } | |
327 | ||
328 | static int | |
329 | geode_ecb_encrypt(struct blkcipher_desc *desc, | |
330 | struct scatterlist *dst, struct scatterlist *src, | |
331 | unsigned int nbytes) | |
332 | { | |
333 | struct geode_aes_op *op = crypto_blkcipher_ctx(desc->tfm); | |
334 | struct blkcipher_walk walk; | |
335 | int err, ret; | |
336 | ||
337 | blkcipher_walk_init(&walk, dst, src, nbytes); | |
338 | err = blkcipher_walk_virt(desc, &walk); | |
339 | ||
340 | while((nbytes = walk.nbytes)) { | |
341 | op->src = walk.src.virt.addr, | |
342 | op->dst = walk.dst.virt.addr; | |
343 | op->mode = AES_MODE_ECB; | |
344 | op->len = nbytes - (nbytes % AES_MIN_BLOCK_SIZE); | |
345 | op->dir = AES_DIR_ENCRYPT; | |
346 | ||
347 | ret = geode_aes_crypt(op); | |
348 | nbytes -= ret; | |
349 | ret = blkcipher_walk_done(desc, &walk, nbytes); | |
350 | } | |
351 | ||
352 | return err; | |
353 | } | |
354 | ||
355 | static struct crypto_alg geode_ecb_alg = { | |
356 | .cra_name = "ecb(aes)", | |
357 | .cra_driver_name = "ecb-aes-geode-128", | |
358 | .cra_priority = 400, | |
359 | .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, | |
360 | .cra_blocksize = AES_MIN_BLOCK_SIZE, | |
361 | .cra_ctxsize = sizeof(struct geode_aes_op), | |
362 | .cra_alignmask = 15, | |
363 | .cra_type = &crypto_blkcipher_type, | |
364 | .cra_module = THIS_MODULE, | |
365 | .cra_list = LIST_HEAD_INIT(geode_ecb_alg.cra_list), | |
366 | .cra_u = { | |
367 | .blkcipher = { | |
368 | .min_keysize = AES_KEY_LENGTH, | |
369 | .max_keysize = AES_KEY_LENGTH, | |
370 | .setkey = geode_setkey, | |
371 | .encrypt = geode_ecb_encrypt, | |
372 | .decrypt = geode_ecb_decrypt, | |
373 | } | |
374 | } | |
375 | }; | |
376 | ||
377 | static void | |
378 | geode_aes_remove(struct pci_dev *dev) | |
379 | { | |
380 | crypto_unregister_alg(&geode_alg); | |
381 | crypto_unregister_alg(&geode_ecb_alg); | |
382 | crypto_unregister_alg(&geode_cbc_alg); | |
383 | ||
384 | pci_iounmap(dev, _iobase); | |
385 | _iobase = NULL; | |
386 | ||
387 | pci_release_regions(dev); | |
388 | pci_disable_device(dev); | |
389 | } | |
390 | ||
391 | ||
392 | static int | |
393 | geode_aes_probe(struct pci_dev *dev, const struct pci_device_id *id) | |
394 | { | |
395 | int ret; | |
396 | ||
397 | if ((ret = pci_enable_device(dev))) | |
398 | return ret; | |
399 | ||
400 | if ((ret = pci_request_regions(dev, "geode-aes-128"))) | |
401 | goto eenable; | |
402 | ||
403 | _iobase = pci_iomap(dev, 0, 0); | |
404 | ||
405 | if (_iobase == NULL) { | |
406 | ret = -ENOMEM; | |
407 | goto erequest; | |
408 | } | |
409 | ||
410 | spin_lock_init(&lock); | |
411 | ||
412 | /* Clear any pending activity */ | |
413 | iowrite32(AES_INTR_PENDING | AES_INTR_MASK, _iobase + AES_INTR_REG); | |
414 | ||
415 | if ((ret = crypto_register_alg(&geode_alg))) | |
416 | goto eiomap; | |
417 | ||
418 | if ((ret = crypto_register_alg(&geode_ecb_alg))) | |
419 | goto ealg; | |
420 | ||
421 | if ((ret = crypto_register_alg(&geode_cbc_alg))) | |
422 | goto eecb; | |
423 | ||
424 | printk(KERN_NOTICE "geode-aes: GEODE AES engine enabled.\n"); | |
425 | return 0; | |
426 | ||
427 | eecb: | |
428 | crypto_unregister_alg(&geode_ecb_alg); | |
429 | ||
430 | ealg: | |
431 | crypto_unregister_alg(&geode_alg); | |
432 | ||
433 | eiomap: | |
434 | pci_iounmap(dev, _iobase); | |
435 | ||
436 | erequest: | |
437 | pci_release_regions(dev); | |
438 | ||
439 | eenable: | |
440 | pci_disable_device(dev); | |
441 | ||
442 | printk(KERN_ERR "geode-aes: GEODE AES initialization failed.\n"); | |
443 | return ret; | |
444 | } | |
445 | ||
446 | static struct pci_device_id geode_aes_tbl[] = { | |
447 | { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LX_AES, PCI_ANY_ID, PCI_ANY_ID} , | |
448 | { 0, } | |
449 | }; | |
450 | ||
451 | MODULE_DEVICE_TABLE(pci, geode_aes_tbl); | |
452 | ||
453 | static struct pci_driver geode_aes_driver = { | |
454 | .name = "Geode LX AES", | |
455 | .id_table = geode_aes_tbl, | |
456 | .probe = geode_aes_probe, | |
457 | .remove = __devexit_p(geode_aes_remove) | |
458 | }; | |
459 | ||
460 | static int __init | |
461 | geode_aes_init(void) | |
462 | { | |
09cb914f | 463 | return pci_register_driver(&geode_aes_driver); |
9fe757b0 JC |
464 | } |
465 | ||
466 | static void __exit | |
467 | geode_aes_exit(void) | |
468 | { | |
469 | pci_unregister_driver(&geode_aes_driver); | |
470 | } | |
471 | ||
472 | MODULE_AUTHOR("Advanced Micro Devices, Inc."); | |
473 | MODULE_DESCRIPTION("Geode LX Hardware AES driver"); | |
474 | MODULE_LICENSE("GPL"); | |
475 | ||
476 | module_init(geode_aes_init); | |
477 | module_exit(geode_aes_exit); |