efi: efistub: Refactor stub components
[deliverable/linux.git] / drivers / firmware / efi / fdt.c
CommitLineData
263b4a30
RF
1/*
2 * FDT related Helper functions used by the EFI stub on multiple
3 * architectures. This should be #included by the EFI stub
4 * implementation files.
5 *
6 * Copyright 2013 Linaro Limited; author Roy Franz
7 *
8 * This file is part of the Linux kernel, and is made available
9 * under the terms of the GNU General Public License version 2.
10 *
11 */
12
bd669475
AB
13#include <linux/efi.h>
14#include <linux/libfdt.h>
15#include <asm/efi.h>
16
17efi_status_t update_fdt(efi_system_table_t *sys_table, void *orig_fdt,
18 unsigned long orig_fdt_size,
19 void *fdt, int new_fdt_size, char *cmdline_ptr,
20 u64 initrd_addr, u64 initrd_size,
21 efi_memory_desc_t *memory_map,
22 unsigned long map_size, unsigned long desc_size,
23 u32 desc_ver)
263b4a30
RF
24{
25 int node, prev;
26 int status;
27 u32 fdt_val32;
28 u64 fdt_val64;
29
263b4a30
RF
30 /* Do some checks on provided FDT, if it exists*/
31 if (orig_fdt) {
32 if (fdt_check_header(orig_fdt)) {
33 pr_efi_err(sys_table, "Device Tree header not valid!\n");
34 return EFI_LOAD_ERROR;
35 }
36 /*
37 * We don't get the size of the FDT if we get if from a
38 * configuration table.
39 */
40 if (orig_fdt_size && fdt_totalsize(orig_fdt) > orig_fdt_size) {
41 pr_efi_err(sys_table, "Truncated device tree! foo!\n");
42 return EFI_LOAD_ERROR;
43 }
44 }
45
46 if (orig_fdt)
47 status = fdt_open_into(orig_fdt, fdt, new_fdt_size);
48 else
49 status = fdt_create_empty_tree(fdt, new_fdt_size);
50
51 if (status != 0)
52 goto fdt_set_fail;
53
54 /*
55 * Delete any memory nodes present. We must delete nodes which
56 * early_init_dt_scan_memory may try to use.
57 */
58 prev = 0;
59 for (;;) {
60 const char *type, *name;
61 int len;
62
63 node = fdt_next_node(fdt, prev, NULL);
64 if (node < 0)
65 break;
66
67 type = fdt_getprop(fdt, node, "device_type", &len);
68 if (type && strncmp(type, "memory", len) == 0) {
69 fdt_del_node(fdt, node);
70 continue;
71 }
72
73 prev = node;
74 }
75
76 node = fdt_subnode_offset(fdt, 0, "chosen");
77 if (node < 0) {
78 node = fdt_add_subnode(fdt, 0, "chosen");
79 if (node < 0) {
80 status = node; /* node is error code when negative */
81 goto fdt_set_fail;
82 }
83 }
84
85 if ((cmdline_ptr != NULL) && (strlen(cmdline_ptr) > 0)) {
86 status = fdt_setprop(fdt, node, "bootargs", cmdline_ptr,
87 strlen(cmdline_ptr) + 1);
88 if (status)
89 goto fdt_set_fail;
90 }
91
92 /* Set initrd address/end in device tree, if present */
93 if (initrd_size != 0) {
94 u64 initrd_image_end;
95 u64 initrd_image_start = cpu_to_fdt64(initrd_addr);
96
97 status = fdt_setprop(fdt, node, "linux,initrd-start",
98 &initrd_image_start, sizeof(u64));
99 if (status)
100 goto fdt_set_fail;
101 initrd_image_end = cpu_to_fdt64(initrd_addr + initrd_size);
102 status = fdt_setprop(fdt, node, "linux,initrd-end",
103 &initrd_image_end, sizeof(u64));
104 if (status)
105 goto fdt_set_fail;
106 }
107
108 /* Add FDT entries for EFI runtime services in chosen node. */
109 node = fdt_subnode_offset(fdt, 0, "chosen");
110 fdt_val64 = cpu_to_fdt64((u64)(unsigned long)sys_table);
111 status = fdt_setprop(fdt, node, "linux,uefi-system-table",
112 &fdt_val64, sizeof(fdt_val64));
113 if (status)
114 goto fdt_set_fail;
115
116 fdt_val64 = cpu_to_fdt64((u64)(unsigned long)memory_map);
117 status = fdt_setprop(fdt, node, "linux,uefi-mmap-start",
118 &fdt_val64, sizeof(fdt_val64));
119 if (status)
120 goto fdt_set_fail;
121
122 fdt_val32 = cpu_to_fdt32(map_size);
123 status = fdt_setprop(fdt, node, "linux,uefi-mmap-size",
124 &fdt_val32, sizeof(fdt_val32));
125 if (status)
126 goto fdt_set_fail;
127
128 fdt_val32 = cpu_to_fdt32(desc_size);
129 status = fdt_setprop(fdt, node, "linux,uefi-mmap-desc-size",
130 &fdt_val32, sizeof(fdt_val32));
131 if (status)
132 goto fdt_set_fail;
133
134 fdt_val32 = cpu_to_fdt32(desc_ver);
135 status = fdt_setprop(fdt, node, "linux,uefi-mmap-desc-ver",
136 &fdt_val32, sizeof(fdt_val32));
137 if (status)
138 goto fdt_set_fail;
139
140 /*
141 * Add kernel version banner so stub/kernel match can be
142 * verified.
143 */
144 status = fdt_setprop_string(fdt, node, "linux,uefi-stub-kern-ver",
145 linux_banner);
146 if (status)
147 goto fdt_set_fail;
148
149 return EFI_SUCCESS;
150
151fdt_set_fail:
152 if (status == -FDT_ERR_NOSPACE)
153 return EFI_BUFFER_TOO_SMALL;
154
155 return EFI_LOAD_ERROR;
156}
157
158#ifndef EFI_FDT_ALIGN
159#define EFI_FDT_ALIGN EFI_PAGE_SIZE
160#endif
161
162/*
163 * Allocate memory for a new FDT, then add EFI, commandline, and
164 * initrd related fields to the FDT. This routine increases the
165 * FDT allocation size until the allocated memory is large
166 * enough. EFI allocations are in EFI_PAGE_SIZE granules,
167 * which are fixed at 4K bytes, so in most cases the first
168 * allocation should succeed.
169 * EFI boot services are exited at the end of this function.
170 * There must be no allocations between the get_memory_map()
171 * call and the exit_boot_services() call, so the exiting of
172 * boot services is very tightly tied to the creation of the FDT
173 * with the final memory map in it.
174 */
175
176efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table,
177 void *handle,
178 unsigned long *new_fdt_addr,
179 unsigned long max_addr,
180 u64 initrd_addr, u64 initrd_size,
181 char *cmdline_ptr,
182 unsigned long fdt_addr,
183 unsigned long fdt_size)
184{
185 unsigned long map_size, desc_size;
186 u32 desc_ver;
187 unsigned long mmap_key;
188 efi_memory_desc_t *memory_map;
189 unsigned long new_fdt_size;
190 efi_status_t status;
191
192 /*
193 * Estimate size of new FDT, and allocate memory for it. We
194 * will allocate a bigger buffer if this ends up being too
195 * small, so a rough guess is OK here.
196 */
197 new_fdt_size = fdt_size + EFI_PAGE_SIZE;
198 while (1) {
199 status = efi_high_alloc(sys_table, new_fdt_size, EFI_FDT_ALIGN,
200 new_fdt_addr, max_addr);
201 if (status != EFI_SUCCESS) {
202 pr_efi_err(sys_table, "Unable to allocate memory for new device tree.\n");
203 goto fail;
204 }
205
206 /*
207 * Now that we have done our final memory allocation (and free)
208 * we can get the memory map key needed for
209 * exit_boot_services().
210 */
211 status = efi_get_memory_map(sys_table, &memory_map, &map_size,
212 &desc_size, &desc_ver, &mmap_key);
213 if (status != EFI_SUCCESS)
214 goto fail_free_new_fdt;
215
216 status = update_fdt(sys_table,
217 (void *)fdt_addr, fdt_size,
218 (void *)*new_fdt_addr, new_fdt_size,
219 cmdline_ptr, initrd_addr, initrd_size,
220 memory_map, map_size, desc_size, desc_ver);
221
222 /* Succeeding the first time is the expected case. */
223 if (status == EFI_SUCCESS)
224 break;
225
226 if (status == EFI_BUFFER_TOO_SMALL) {
227 /*
228 * We need to allocate more space for the new
229 * device tree, so free existing buffer that is
230 * too small. Also free memory map, as we will need
231 * to get new one that reflects the free/alloc we do
232 * on the device tree buffer.
233 */
234 efi_free(sys_table, new_fdt_size, *new_fdt_addr);
235 sys_table->boottime->free_pool(memory_map);
236 new_fdt_size += EFI_PAGE_SIZE;
237 } else {
238 pr_efi_err(sys_table, "Unable to constuct new device tree.\n");
239 goto fail_free_mmap;
240 }
241 }
242
243 /* Now we are ready to exit_boot_services.*/
244 status = sys_table->boottime->exit_boot_services(handle, mmap_key);
245
246
247 if (status == EFI_SUCCESS)
248 return status;
249
250 pr_efi_err(sys_table, "Exit boot services failed.\n");
251
252fail_free_mmap:
253 sys_table->boottime->free_pool(memory_map);
254
255fail_free_new_fdt:
256 efi_free(sys_table, new_fdt_size, *new_fdt_addr);
257
258fail:
259 return EFI_LOAD_ERROR;
260}
261
bd669475 262void *get_fdt(efi_system_table_t *sys_table)
263b4a30
RF
263{
264 efi_guid_t fdt_guid = DEVICE_TREE_GUID;
265 efi_config_table_t *tables;
266 void *fdt;
267 int i;
268
269 tables = (efi_config_table_t *) sys_table->tables;
270 fdt = NULL;
271
272 for (i = 0; i < sys_table->nr_tables; i++)
273 if (efi_guidcmp(tables[i].guid, fdt_guid) == 0) {
274 fdt = (void *) tables[i].table;
275 break;
276 }
277
278 return fdt;
279}
This page took 0.039008 seconds and 5 git commands to generate.