Commit | Line | Data |
---|---|---|
a9c5fff5 | 1 | # |
e849dc04 | 2 | # GPIO infrastructure and drivers |
a9c5fff5 DB |
3 | # |
4 | ||
7563bbf8 MB |
5 | config ARCH_HAVE_CUSTOM_GPIO_H |
6 | bool | |
7 | help | |
8 | Selecting this config option from the architecture Kconfig allows | |
9 | the architecture to provide a custom asm/gpio.h implementation | |
10 | overriding the default implementations. New uses of this are | |
11 | strongly discouraged. | |
12 | ||
7444a72e | 13 | config ARCH_WANT_OPTIONAL_GPIOLIB |
a9c5fff5 | 14 | bool |
7444a72e MB |
15 | help |
16 | Select this config option from the architecture Kconfig, if | |
17 | it is possible to use gpiolib on the architecture, but let the | |
18 | user decide whether to actually build it or not. | |
19 | Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does | |
20 | not depend on GPIOs being available, but rather let the user | |
21 | decide whether he needs it or not. | |
22 | ||
23 | config ARCH_REQUIRE_GPIOLIB | |
24 | bool | |
25 | select GPIOLIB | |
a9c5fff5 DB |
26 | help |
27 | Platforms select gpiolib if they use this infrastructure | |
28 | for all their GPIOs, usually starting with ones integrated | |
29 | into SOC processors. | |
7444a72e MB |
30 | Selecting this from the architecture code will cause the gpiolib |
31 | code to always get built in. | |
32 | ||
7444a72e MB |
33 | |
34 | menuconfig GPIOLIB | |
35 | bool "GPIO Support" | |
36 | depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB | |
7444a72e MB |
37 | help |
38 | This enables GPIO support through the generic GPIO library. | |
39 | You only need to enable this, if you also want to enable | |
e849dc04 | 40 | one or more of the GPIO drivers below. |
7444a72e MB |
41 | |
42 | If unsure, say N. | |
a9c5fff5 | 43 | |
7444a72e | 44 | if GPIOLIB |
a9c5fff5 | 45 | |
b69ac524 AC |
46 | config GPIO_DEVRES |
47 | def_bool y | |
48 | depends on HAS_IOMEM | |
49 | ||
f141ed65 GL |
50 | config OF_GPIO |
51 | def_bool y | |
afe760e4 | 52 | depends on OF |
f141ed65 | 53 | |
e29482e8 MN |
54 | config GPIO_ACPI |
55 | def_bool y | |
56 | depends on ACPI | |
57 | ||
14250520 | 58 | config GPIOLIB_IRQCHIP |
fc346270 | 59 | select IRQ_DOMAIN |
14250520 LW |
60 | bool |
61 | ||
a9c5fff5 DB |
62 | config DEBUG_GPIO |
63 | bool "Debug GPIO calls" | |
64 | depends on DEBUG_KERNEL | |
65 | help | |
66 | Say Y here to add some extra checks and diagnostics to GPIO calls. | |
692105b8 ML |
67 | These checks help ensure that GPIOs have been properly initialized |
68 | before they are used, and that sleeping calls are not made from | |
69 | non-sleeping contexts. They can make bitbanged serial protocols | |
a9c5fff5 DB |
70 | slower. The diagnostics help catch the type of setup errors |
71 | that are most common when setting up new platforms or boards. | |
72 | ||
d8f388d8 DB |
73 | config GPIO_SYSFS |
74 | bool "/sys/class/gpio/... (sysfs interface)" | |
4c0ea233 | 75 | depends on SYSFS |
d8f388d8 DB |
76 | help |
77 | Say Y here to add a sysfs interface for GPIOs. | |
78 | ||
79 | This is mostly useful to work around omissions in a system's | |
80 | kernel support. Those are common in custom and semicustom | |
81 | hardware assembled using standard kernels with a minimum of | |
82 | custom patches. In those cases, userspace code may import | |
83 | a given GPIO from the kernel, if no kernel driver requested it. | |
84 | ||
85 | Kernel drivers may also request that a particular GPIO be | |
86 | exported to userspace; this can be useful when debugging. | |
87 | ||
c103de24 GL |
88 | config GPIO_GENERIC |
89 | tristate | |
90 | ||
e849dc04 | 91 | # put drivers in the right section, in alphabetical order |
a9c5fff5 | 92 | |
177b0381 | 93 | # This symbol is selected by both I2C and SPI expanders |
e952805d WS |
94 | config GPIO_MAX730X |
95 | tristate | |
96 | ||
177b0381 | 97 | menu "Memory mapped GPIO drivers" |
0bcb6069 | 98 | |
af0a33e2 AS |
99 | config GPIO_74XX_MMIO |
100 | tristate "GPIO driver for 74xx-ICs with MMIO access" | |
101 | depends on OF_GPIO | |
102 | select GPIO_GENERIC | |
103 | help | |
104 | Say yes here to support GPIO functionality for 74xx-compatible ICs | |
105 | with MMIO access. Compatible models include: | |
106 | 1 bit: 741G125 (Input), 741G74 (Output) | |
107 | 2 bits: 742G125 (Input), 7474 (Output) | |
108 | 4 bits: 74125 (Input), 74175 (Output) | |
109 | 6 bits: 74365 (Input), 74174 (Output) | |
110 | 8 bits: 74244 (Input), 74273 (Output) | |
111 | 16 bits: 741624 (Input), 7416374 (Output) | |
112 | ||
223fa272 LW |
113 | config GPIO_ALTERA |
114 | tristate "Altera GPIO" | |
115 | depends on OF_GPIO | |
223fa272 LW |
116 | select GPIOLIB_IRQCHIP |
117 | help | |
118 | Say Y or M here to build support for the Altera PIO device. | |
119 | ||
120 | If driver is built as a module it will be called gpio-altera. | |
121 | ||
6057d40f YT |
122 | config GPIO_AMDPT |
123 | tristate "AMD Promontory GPIO support" | |
124 | depends on ACPI | |
125 | help | |
126 | driver for GPIO functionality on Promontory IOHub | |
127 | Require ACPI ASL code to enumerate as a platform device. | |
128 | ||
ea948cff LW |
129 | config GPIO_BCM_KONA |
130 | bool "Broadcom Kona GPIO" | |
131 | depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST) | |
132 | help | |
133 | Turn on GPIO support for Broadcom "Kona" chips. | |
134 | ||
3b0213d5 GF |
135 | config GPIO_BRCMSTB |
136 | tristate "BRCMSTB GPIO support" | |
137 | default y if ARCH_BRCMSTB | |
138 | depends on OF_GPIO && (ARCH_BRCMSTB || COMPILE_TEST) | |
139 | select GPIO_GENERIC | |
19a7b694 | 140 | select GPIOLIB_IRQCHIP |
3b0213d5 GF |
141 | help |
142 | Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs. | |
143 | ||
a3b8d4a5 | 144 | config GPIO_CLPS711X |
55fe14ab | 145 | tristate "CLPS711X GPIO support" |
ffd4bf1a | 146 | depends on ARCH_CLPS711X || COMPILE_TEST |
55fe14ab AS |
147 | select GPIO_GENERIC |
148 | help | |
149 | Say yes here to support GPIO on CLPS711X SoCs. | |
a3b8d4a5 | 150 | |
ee89cf63 GS |
151 | config GPIO_DAVINCI |
152 | bool "TI Davinci/Keystone GPIO support" | |
153 | default y if ARCH_DAVINCI | |
154 | depends on ARM && (ARCH_DAVINCI || ARCH_KEYSTONE) | |
155 | help | |
156 | Say yes here to enable GPIO support for TI Davinci/Keystone SoCs. | |
157 | ||
7779b345 JI |
158 | config GPIO_DWAPB |
159 | tristate "Synopsys DesignWare APB GPIO driver" | |
160 | select GPIO_GENERIC | |
161 | select GENERIC_IRQ_CHIP | |
7779b345 JI |
162 | help |
163 | Say Y or M here to build support for the Synopsys DesignWare APB | |
164 | GPIO block. | |
165 | ||
a07e103e MD |
166 | config GPIO_EM |
167 | tristate "Emma Mobile GPIO" | |
b5927854 | 168 | depends on ARM && OF_GPIO |
a07e103e MD |
169 | help |
170 | Say yes here to support GPIO on Renesas Emma Mobile SoCs. | |
171 | ||
c6b52c13 HS |
172 | config GPIO_EP93XX |
173 | def_bool y | |
174 | depends on ARCH_EP93XX | |
1e4c8842 | 175 | select GPIO_GENERIC |
c6b52c13 | 176 | |
d342571e RV |
177 | config GPIO_ETRAXFS |
178 | bool "Axis ETRAX FS General I/O" | |
179 | depends on CRIS || COMPILE_TEST | |
180 | depends on OF | |
181 | select GPIO_GENERIC | |
29b5357d | 182 | select GPIOLIB_IRQCHIP |
d342571e RV |
183 | help |
184 | Say yes here to support the GPIO controller on Axis ETRAX FS SoCs. | |
185 | ||
223fa272 LW |
186 | config GPIO_GE_FPGA |
187 | bool "GE FPGA based GPIO" | |
188 | depends on GE_FPGA | |
189 | select GPIO_GENERIC | |
190 | help | |
191 | Support for common GPIO functionality provided on some GE Single Board | |
192 | Computers. | |
193 | ||
194 | This driver provides basic support (configure as input or output, read | |
195 | and write pin state) for GPIO implemented in a number of GE single | |
196 | board computers. | |
197 | ||
198 | config GPIO_GENERIC_PLATFORM | |
199 | tristate "Generic memory-mapped GPIO controller support (MMIO platform device)" | |
200 | select GPIO_GENERIC | |
201 | help | |
202 | Say yes here to support basic platform_device memory-mapped GPIO controllers. | |
203 | ||
204 | config GPIO_GRGPIO | |
205 | tristate "Aeroflex Gaisler GRGPIO support" | |
206 | depends on OF | |
207 | select GPIO_GENERIC | |
208 | select IRQ_DOMAIN | |
209 | help | |
210 | Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB | |
211 | VHDL IP core library. | |
212 | ||
213 | config GPIO_ICH | |
214 | tristate "Intel ICH GPIO" | |
215 | depends on PCI && X86 | |
216 | select MFD_CORE | |
217 | select LPC_ICH | |
218 | help | |
219 | Say yes here to support the GPIO functionality of a number of Intel | |
220 | ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8 | |
221 | ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg | |
222 | Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake). | |
223 | ||
224 | If unsure, say N. | |
225 | ||
226 | config GPIO_IOP | |
227 | tristate "Intel IOP GPIO" | |
228 | depends on ARM && (ARCH_IOP32X || ARCH_IOP33X) | |
229 | help | |
230 | Say yes here to support the GPIO functionality of a number of Intel | |
231 | IOP32X or IOP33X. | |
232 | ||
233 | If unsure, say N. | |
234 | ||
223fa272 LW |
235 | config GPIO_LOONGSON |
236 | bool "Loongson-2/3 GPIO support" | |
237 | depends on CPU_LOONGSON2 || CPU_LOONGSON3 | |
238 | help | |
239 | driver for GPIO functionality on Loongson-2F/3A/3B processors. | |
240 | ||
13a43fd9 JE |
241 | config GPIO_LPC18XX |
242 | bool "NXP LPC18XX/43XX GPIO support" | |
243 | default y if ARCH_LPC18XX | |
244 | depends on OF_GPIO && (ARCH_LPC18XX || COMPILE_TEST) | |
245 | help | |
246 | Select this option to enable GPIO driver for | |
247 | NXP LPC18XX/43XX devices. | |
248 | ||
223fa272 LW |
249 | config GPIO_LYNXPOINT |
250 | tristate "Intel Lynxpoint GPIO support" | |
251 | depends on ACPI && X86 | |
252 | select GPIOLIB_IRQCHIP | |
253 | help | |
254 | driver for GPIO functionality on Intel Lynxpoint PCH chipset | |
255 | Requires ACPI device enumeration code to set up a platform device. | |
256 | ||
0da094d8 JB |
257 | config GPIO_MB86S7X |
258 | bool "GPIO support for Fujitsu MB86S7x Platforms" | |
259 | depends on ARCH_MB86S7X | |
260 | help | |
261 | Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs. | |
262 | ||
223fa272 LW |
263 | config GPIO_MM_LANTIQ |
264 | bool "Lantiq Memory mapped GPIOs" | |
265 | depends on LANTIQ && SOC_XWAY | |
266 | help | |
267 | This enables support for memory mapped GPIOs on the External Bus Unit | |
268 | (EBU) found on Lantiq SoCs. The gpios are output only as they are | |
269 | created by attaching a 16bit latch to the bus. | |
270 | ||
0299b77b JJ |
271 | config GPIO_MOXART |
272 | bool "MOXART GPIO support" | |
273 | depends on ARCH_MOXART | |
3c01b9a8 | 274 | select GPIO_GENERIC |
0299b77b JJ |
275 | help |
276 | Select this option to enable GPIO driver for | |
277 | MOXA ART SoC devices. | |
278 | ||
6eae1ace GL |
279 | config GPIO_MPC5200 |
280 | def_bool y | |
281 | depends on PPC_MPC52xx | |
282 | ||
c68308dd WS |
283 | config GPIO_MPC8XXX |
284 | bool "MPC512x/MPC8xxx GPIO support" | |
285 | depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \ | |
286 | FSL_SOC_BOOKE || PPC_86xx | |
287 | help | |
288 | Say Y here if you're going to use hardware that connects to the | |
289 | MPC512x/831x/834x/837x/8572/8610 GPIOs. | |
290 | ||
fefe7b09 TP |
291 | config GPIO_MVEBU |
292 | def_bool y | |
49e928d6 | 293 | depends on PLAT_ORION |
bc1008cf | 294 | depends on OF |
fefe7b09 TP |
295 | select GENERIC_IRQ_CHIP |
296 | ||
d37a65bb SG |
297 | config GPIO_MXC |
298 | def_bool y | |
299 | depends on ARCH_MXC | |
c103de24 | 300 | select GPIO_GENERIC |
e4ea9333 | 301 | select GENERIC_IRQ_CHIP |
c103de24 GL |
302 | |
303 | config GPIO_MXS | |
304 | def_bool y | |
305 | depends on ARCH_MXS | |
06f88a8a | 306 | select GPIO_GENERIC |
498c17cf | 307 | select GENERIC_IRQ_CHIP |
d37a65bb | 308 | |
aca58a66 DD |
309 | config GPIO_OCTEON |
310 | tristate "Cavium OCTEON GPIO" | |
311 | depends on GPIOLIB && CAVIUM_OCTEON_SOC | |
312 | default y | |
313 | help | |
314 | Say yes here to support the on-chip GPIO lines on the OCTEON | |
315 | family of SOCs. | |
316 | ||
cd0a3748 | 317 | config GPIO_OMAP |
cac089f9 | 318 | tristate "TI OMAP GPIO support" if ARCH_OMAP2PLUS || COMPILE_TEST |
cd0a3748 | 319 | default y if ARCH_OMAP |
9d5d96ef AB |
320 | depends on ARM |
321 | select GENERIC_IRQ_CHIP | |
fb655f57 | 322 | select GPIOLIB_IRQCHIP |
cd0a3748 JMC |
323 | help |
324 | Say yes here to enable GPIO support for TI OMAP SoCs. | |
325 | ||
1e9c2859 BS |
326 | config GPIO_PL061 |
327 | bool "PrimeCell PL061 GPIO support" | |
8a242842 | 328 | depends on ARM_AMBA |
a5d6d271 | 329 | select IRQ_DOMAIN |
8d5b24bd | 330 | select GPIOLIB_IRQCHIP |
1e9c2859 BS |
331 | help |
332 | Say yes here to support the PrimeCell PL061 GPIO device | |
333 | ||
157d2644 HZ |
334 | config GPIO_PXA |
335 | bool "PXA GPIO support" | |
336 | depends on ARCH_PXA || ARCH_MMP | |
337 | help | |
338 | Say yes here to support the PXA GPIO device | |
339 | ||
119f5e44 MD |
340 | config GPIO_RCAR |
341 | tristate "Renesas R-Car GPIO" | |
aad38b75 | 342 | depends on ARCH_SHMOBILE || COMPILE_TEST |
c7f3c5d3 | 343 | select GPIOLIB_IRQCHIP |
119f5e44 MD |
344 | help |
345 | Say yes here to support GPIO on Renesas R-Car SoCs. | |
346 | ||
880cf071 TF |
347 | config GPIO_SAMSUNG |
348 | bool | |
349 | depends on PLAT_SAMSUNG | |
350 | help | |
351 | Legacy GPIO support. Use only for platforms without support for | |
352 | pinctrl. | |
353 | ||
b53bc281 SH |
354 | config GPIO_SPEAR_SPICS |
355 | bool "ST SPEAr13xx SPI Chip Select as GPIO support" | |
356 | depends on PLAT_SPEAR | |
357 | select GENERIC_IRQ_CHIP | |
358 | help | |
359 | Say yes here to support ST SPEAr SPI Chip Select as GPIO device | |
360 | ||
7b0d44f3 AR |
361 | config GPIO_STA2X11 |
362 | bool "STA2x11/ConneXt GPIO support" | |
363 | depends on MFD_STA2X11 | |
364 | select GENERIC_IRQ_CHIP | |
365 | help | |
366 | Say yes here to support the STA2x11/ConneXt GPIO device. | |
367 | The GPIO module has 128 GPIO pins with alternate functions. | |
368 | ||
be9cab5b LW |
369 | config GPIO_STP_XWAY |
370 | bool "XWAY STP GPIOs" | |
371 | depends on SOC_XWAY | |
372 | help | |
373 | This enables support for the Serial To Parallel (STP) unit found on | |
374 | XWAY SoC. The STP allows the SoC to drive a shift registers cascade, | |
375 | that can be up to 24 bit. This peripheral is aimed at driving leds. | |
376 | Some of the gpios/leds can be auto updated by the soc with dsl and | |
377 | phy status. | |
378 | ||
6a8a0c1d AS |
379 | config GPIO_SYSCON |
380 | tristate "GPIO based on SYSCON" | |
381 | depends on MFD_SYSCON && OF | |
382 | help | |
383 | Say yes here to support GPIO functionality though SYSCON driver. | |
384 | ||
223fa272 LW |
385 | config GPIO_TB10X |
386 | bool | |
387 | select GENERIC_IRQ_CHIP | |
388 | select OF_GPIO | |
389 | ||
9caf1f22 JH |
390 | config GPIO_TZ1090 |
391 | bool "Toumaz Xenif TZ1090 GPIO support" | |
392 | depends on SOC_TZ1090 | |
04777396 | 393 | select GENERIC_IRQ_CHIP |
9caf1f22 JH |
394 | default y |
395 | help | |
396 | Say yes here to support Toumaz Xenif TZ1090 GPIOs. | |
397 | ||
79bb6460 JH |
398 | config GPIO_TZ1090_PDC |
399 | bool "Toumaz Xenif TZ1090 PDC GPIO support" | |
400 | depends on SOC_TZ1090 | |
401 | default y | |
402 | help | |
403 | Say yes here to support Toumaz Xenif TZ1090 PDC GPIOs. | |
404 | ||
7f2691a1 SA |
405 | config GPIO_VF610 |
406 | def_bool y | |
407 | depends on ARCH_MXC && SOC_VF610 | |
408 | select GPIOLIB_IRQCHIP | |
409 | help | |
410 | Say yes here to support Vybrid vf610 GPIOs. | |
411 | ||
223fa272 LW |
412 | config GPIO_VR41XX |
413 | tristate "NEC VR4100 series General-purpose I/O Uint support" | |
414 | depends on CPU_VR41XX | |
415 | help | |
416 | Say yes here to support the NEC VR4100 series General-purpose I/O Uint | |
417 | ||
418 | config GPIO_VX855 | |
419 | tristate "VIA VX855/VX875 GPIO" | |
420 | depends on PCI | |
421 | select MFD_CORE | |
422 | select MFD_VX855 | |
423 | help | |
424 | Support access to the VX855/VX875 GPIO lines through the gpio library. | |
425 | ||
426 | This driver provides common support for accessing the device, | |
427 | additional drivers must be enabled in order to use the | |
428 | functionality of the device. | |
429 | ||
29cbf458 FK |
430 | config GPIO_XGENE |
431 | bool "APM X-Gene GPIO controller support" | |
432 | depends on ARM64 && OF_GPIO | |
433 | help | |
434 | This driver is to support the GPIO block within the APM X-Gene SoC | |
435 | platform's generic flash controller. The GPIO pins are muxed with | |
436 | the generic flash controller's address and data pins. Say yes | |
437 | here to enable the GFC GPIO functionality. | |
438 | ||
b2b35e10 V |
439 | config GPIO_XGENE_SB |
440 | tristate "APM X-Gene GPIO standby controller support" | |
441 | depends on ARCH_XGENE && OF_GPIO | |
442 | select GPIO_GENERIC | |
443 | help | |
444 | This driver supports the GPIO block within the APM X-Gene | |
445 | Standby Domain. Say yes here to enable the GPIO functionality. | |
446 | ||
0bcb6069 | 447 | config GPIO_XILINX |
c54c58ba | 448 | tristate "Xilinx GPIO support" |
79786721 | 449 | depends on OF_GPIO |
0bcb6069 JL |
450 | help |
451 | Say yes here to support the Xilinx FPGA GPIO device | |
452 | ||
ff718800 KP |
453 | config GPIO_XLP |
454 | tristate "Netlogic XLP GPIO support" | |
83ea24fd | 455 | depends on CPU_XLP && OF_GPIO |
ff718800 KP |
456 | select GPIOLIB_IRQCHIP |
457 | help | |
458 | This driver provides support for GPIO interface on Netlogic XLP MIPS64 | |
459 | SoCs. Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX, | |
460 | XLP9XX and XLP5XX. | |
461 | ||
462 | If unsure, say N. | |
463 | ||
3b31d0ec BS |
464 | config GPIO_XTENSA |
465 | bool "Xtensa GPIO32 support" | |
466 | depends on XTENSA | |
a1a2bdec | 467 | depends on HAVE_XTENSA_GPIO32 |
3b31d0ec BS |
468 | depends on !SMP |
469 | help | |
470 | Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input) | |
471 | and EXPSTATE (output) ports | |
472 | ||
223fa272 LW |
473 | config GPIO_ZEVIO |
474 | bool "LSI ZEVIO SoC memory mapped GPIOs" | |
475 | depends on ARM && OF_GPIO | |
27fdd325 | 476 | help |
223fa272 | 477 | Say yes here to support the GPIO controller in LSI ZEVIO SoCs. |
27fdd325 | 478 | |
223fa272 LW |
479 | config GPIO_ZYNQ |
480 | tristate "Xilinx Zynq GPIO support" | |
bdf7a4ae | 481 | depends on ARCH_ZYNQ || ARCH_ZYNQMP |
7f87210e | 482 | select GPIOLIB_IRQCHIP |
be9b06b2 | 483 | help |
223fa272 | 484 | Say yes here to support Xilinx Zynq GPIO controller. |
92021490 | 485 | |
0963670a LW |
486 | config GPIO_ZX |
487 | bool "ZTE ZX GPIO support" | |
488 | select GPIOLIB_IRQCHIP | |
489 | help | |
490 | Say yes here to support the GPIO device on ZTE ZX SoCs. | |
491 | ||
177b0381 | 492 | endmenu |
be9b06b2 | 493 | |
bc6a73bb | 494 | menu "Port-mapped I/O GPIO drivers" |
7768feb0 | 495 | depends on X86 # Unconditional I/O space access |
bc6a73bb LW |
496 | |
497 | config GPIO_104_IDIO_16 | |
498 | tristate "ACCES 104-IDIO-16 GPIO support" | |
bc6a73bb LW |
499 | help |
500 | Enables GPIO support for the ACCES 104-IDIO-16 family. | |
501 | ||
502 | config GPIO_F7188X | |
503 | tristate "F71869, F71869A, F71882FG and F71889F GPIO support" | |
bc6a73bb LW |
504 | help |
505 | This option enables support for GPIOs found on Fintek Super-I/O | |
506 | chips F71869, F71869A, F71882FG and F71889F. | |
507 | ||
508 | To compile this driver as a module, choose M here: the module will | |
509 | be called f7188x-gpio. | |
510 | ||
511 | config GPIO_IT87 | |
512 | tristate "IT87xx GPIO support" | |
bc6a73bb LW |
513 | help |
514 | Say yes here to support GPIO functionality of IT87xx Super I/O chips. | |
515 | ||
516 | This driver is tested with ITE IT8728 and IT8732 Super I/O chips, and | |
517 | supports the IT8761E Super I/O chip as well. | |
518 | ||
519 | To compile this driver as a module, choose M here: the module will | |
520 | be called gpio_it87 | |
521 | ||
522 | config GPIO_SCH | |
523 | tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO" | |
7768feb0 | 524 | depends on PCI |
bc6a73bb LW |
525 | select MFD_CORE |
526 | select LPC_SCH | |
527 | help | |
528 | Say yes here to support GPIO interface on Intel Poulsbo SCH, | |
529 | Intel Tunnel Creek processor, Intel Centerton processor or | |
530 | Intel Quark X1000 SoC. | |
531 | ||
532 | The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are | |
533 | powered by the core power rail and are turned off during sleep | |
534 | modes (S3 and higher). The remaining four GPIOs are powered by | |
535 | the Intel SCH suspend power supply. These GPIOs remain | |
536 | active during S3. The suspend powered GPIOs can be used to wake the | |
537 | system from the Suspend-to-RAM state. | |
538 | ||
539 | The Intel Tunnel Creek processor has 5 GPIOs powered by the | |
540 | core power rail and 9 from suspend power supply. | |
541 | ||
542 | The Intel Centerton processor has a total of 30 GPIO pins. | |
543 | Twenty-one are powered by the core power rail and 9 from the | |
544 | suspend power supply. | |
545 | ||
546 | The Intel Quark X1000 SoC has 2 GPIOs powered by the core | |
547 | power well and 6 from the suspend power well. | |
548 | ||
549 | config GPIO_SCH311X | |
550 | tristate "SMSC SCH311x SuperI/O GPIO" | |
551 | help | |
552 | Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and | |
553 | SCH3116 "Super I/O" chipsets. | |
554 | ||
555 | To compile this driver as a module, choose M here: the module will | |
556 | be called gpio-sch311x. | |
557 | ||
558 | config GPIO_TS5500 | |
559 | tristate "TS-5500 DIO blocks and compatibles" | |
560 | depends on TS5500 || COMPILE_TEST | |
561 | help | |
562 | This driver supports Digital I/O exposed by pin blocks found on some | |
563 | Technologic Systems platforms. It includes, but is not limited to, 3 | |
564 | blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600 | |
565 | LCD port. | |
566 | ||
567 | endmenu | |
568 | ||
177b0381 LW |
569 | menu "I2C GPIO expanders" |
570 | depends on I2C | |
92021490 | 571 | |
bf5a16ba LW |
572 | config GPIO_ADP5588 |
573 | tristate "ADP5588 I2C GPIO expander" | |
6ed9f9c4 | 574 | help |
bf5a16ba LW |
575 | This option enables support for 18 GPIOs found |
576 | on Analog Devices ADP5588 GPIO Expanders. | |
be9b06b2 | 577 | |
bf5a16ba LW |
578 | config GPIO_ADP5588_IRQ |
579 | bool "Interrupt controller support for ADP5588" | |
580 | depends on GPIO_ADP5588=y | |
e9004f50 | 581 | help |
bf5a16ba LW |
582 | Say yes here to enable the adp5588 to be used as an interrupt |
583 | controller. It requires the driver to be built in the kernel. | |
31ba56f2 | 584 | |
bf5a16ba LW |
585 | config GPIO_ADNP |
586 | tristate "Avionic Design N-bit GPIO expander" | |
269a46f8 | 587 | depends on OF_GPIO |
104fb1d5 ZL |
588 | select GPIOLIB_IRQCHIP |
589 | help | |
bf5a16ba LW |
590 | This option enables support for N GPIOs found on Avionic Design |
591 | I2C GPIO expanders. The register space will be extended by powers | |
592 | of two, so the controller will need to accommodate for that. For | |
593 | example: if a controller provides 48 pins, 6 registers will be | |
594 | enough to represent all pins, but the driver will assume a | |
595 | register layout for 64 pins (8 registers). | |
0cc59b9d | 596 | |
e952805d WS |
597 | config GPIO_MAX7300 |
598 | tristate "Maxim MAX7300 GPIO expander" | |
e952805d WS |
599 | select GPIO_MAX730X |
600 | help | |
2b861f4b | 601 | GPIO driver for Maxim MAX7300 I2C-based GPIO expander. |
e952805d | 602 | |
bbcd6d54 EM |
603 | config GPIO_MAX732X |
604 | tristate "MAX7319, MAX7320-7327 I2C Port Expanders" | |
bbcd6d54 EM |
605 | help |
606 | Say yes here to support the MAX7319, MAX7320-7327 series of I2C | |
607 | Port Expanders. Each IO port on these chips has a fixed role of | |
608 | Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain | |
609 | Input and Output (designed by 'P'). The combinations are listed | |
610 | below: | |
611 | ||
612 | 8 bits: max7319 (8I), max7320 (8O), max7321 (8P), | |
613 | max7322 (4I4O), max7323 (4P4O) | |
614 | ||
615 | 16 bits: max7324 (8I8O), max7325 (8P8O), | |
616 | max7326 (4I12O), max7327 (4P12O) | |
617 | ||
618 | Board setup code must specify the model to use, and the start | |
619 | number for these GPIOs. | |
620 | ||
a80a0bbe MZ |
621 | config GPIO_MAX732X_IRQ |
622 | bool "Interrupt controller support for MAX732x" | |
0244ad00 | 623 | depends on GPIO_MAX732X=y |
984f6643 | 624 | select GPIOLIB_IRQCHIP |
a80a0bbe MZ |
625 | help |
626 | Say yes here to enable the max732x to be used as an interrupt | |
627 | controller. It requires the driver to be built in the kernel. | |
628 | ||
608589b1 | 629 | config GPIO_MC9S08DZ60 |
630 | bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions" | |
4c30aa33 | 631 | depends on I2C=y && MACH_MX35_3DS |
608589b1 | 632 | help |
633 | Select this to enable the MC9S08DZ60 GPIO driver | |
634 | ||
f3dc3630 | 635 | config GPIO_PCA953X |
eb32b5aa | 636 | tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports" |
9e60fdcf | 637 | help |
7059d4b0 DB |
638 | Say yes here to provide access to several register-oriented |
639 | SMBus I/O expanders, made mostly by NXP or TI. Compatible | |
640 | models include: | |
641 | ||
642 | 4 bits: pca9536, pca9537 | |
643 | ||
c29985dd | 644 | 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554, |
e73760a6 | 645 | pca9556, pca9557, pca9574, tca6408, xra1202 |
7059d4b0 | 646 | |
c29985dd AL |
647 | 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575, |
648 | tca6416 | |
9e60fdcf | 649 | |
1e191695 AS |
650 | 24 bits: tca6424 |
651 | ||
eb32b5aa | 652 | 40 bits: pca9505, pca9698 |
1e191695 | 653 | |
89ea8bbe MZ |
654 | config GPIO_PCA953X_IRQ |
655 | bool "Interrupt controller support for PCA953x" | |
656 | depends on GPIO_PCA953X=y | |
7bcbce55 | 657 | select GPIOLIB_IRQCHIP |
89ea8bbe MZ |
658 | help |
659 | Say yes here to enable the pca953x to be used as an interrupt | |
660 | controller. It requires the driver to be built in the kernel. | |
661 | ||
15fae37d | 662 | config GPIO_PCF857X |
1673ad52 | 663 | tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders" |
a39294bd | 664 | select GPIOLIB_IRQCHIP |
901acf5b | 665 | select IRQ_DOMAIN |
15fae37d DB |
666 | help |
667 | Say yes here to provide access to most "quasi-bidirectional" I2C | |
668 | GPIO expanders used for additional digital outputs or inputs. | |
669 | Most of these parts are from NXP, though TI is a second source for | |
670 | some of them. Compatible models include: | |
671 | ||
672 | 8 bits: pcf8574, pcf8574a, pca8574, pca8574a, | |
1673ad52 DB |
673 | pca9670, pca9672, pca9674, pca9674a, |
674 | max7328, max7329 | |
15fae37d DB |
675 | |
676 | 16 bits: pcf8575, pcf8575c, pca8575, | |
677 | pca9671, pca9673, pca9675 | |
678 | ||
679 | Your board setup code will need to declare the expanders in | |
680 | use, and assign numbers to the GPIOs they expose. Those GPIOs | |
681 | can then be used from drivers and other kernel code, just like | |
682 | other GPIOs, but only accessible from task contexts. | |
683 | ||
684 | This driver provides an in-kernel interface to those GPIOs using | |
685 | platform-neutral GPIO calls. | |
686 | ||
c34f16b7 GB |
687 | config GPIO_SX150X |
688 | bool "Semtech SX150x I2C GPIO expander" | |
689 | depends on I2C=y | |
093e9435 | 690 | select GPIOLIB_IRQCHIP |
c34f16b7 GB |
691 | default n |
692 | help | |
693 | Say yes here to provide support for Semtech SX150-series I2C | |
694 | GPIO expanders. Compatible models include: | |
695 | ||
696 | 8 bits: sx1508q | |
697 | 16 bits: sx1509q | |
698 | ||
177b0381 LW |
699 | endmenu |
700 | ||
701 | menu "MFD GPIO expanders" | |
be9cab5b LW |
702 | |
703 | config GPIO_ADP5520 | |
704 | tristate "GPIO Support for ADP5520 PMIC" | |
705 | depends on PMIC_ADP5520 | |
706 | help | |
707 | This option enables support for on-chip GPIO found | |
708 | on Analog Devices ADP5520 PMICs. | |
709 | ||
710 | config GPIO_ARIZONA | |
711 | tristate "Wolfson Microelectronics Arizona class devices" | |
712 | depends on MFD_ARIZONA | |
713 | help | |
714 | Support for GPIOs on Wolfson Arizona class devices. | |
715 | ||
716 | config GPIO_CRYSTAL_COVE | |
717 | tristate "GPIO support for Crystal Cove PMIC" | |
718 | depends on INTEL_SOC_PMIC | |
719 | select GPIOLIB_IRQCHIP | |
720 | help | |
721 | Support for GPIO pins on Crystal Cove PMIC. | |
722 | ||
723 | Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC | |
724 | inside. | |
725 | ||
726 | This driver can also be built as a module. If so, the module will be | |
727 | called gpio-crystalcove. | |
728 | ||
729 | config GPIO_CS5535 | |
730 | tristate "AMD CS5535/CS5536 GPIO support" | |
731 | depends on MFD_CS5535 | |
732 | help | |
733 | The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that | |
734 | can be used for quite a number of things. The CS5535/6 is found on | |
735 | AMD Geode and Lemote Yeeloong devices. | |
736 | ||
737 | If unsure, say N. | |
738 | ||
739 | config GPIO_DA9052 | |
740 | tristate "Dialog DA9052 GPIO" | |
741 | depends on PMIC_DA9052 | |
742 | help | |
743 | Say yes here to enable the GPIO driver for the DA9052 chip. | |
744 | ||
745 | config GPIO_DA9055 | |
746 | tristate "Dialog Semiconductor DA9055 GPIO" | |
747 | depends on MFD_DA9055 | |
748 | help | |
749 | Say yes here to enable the GPIO driver for the DA9055 chip. | |
750 | ||
751 | The Dialog DA9055 PMIC chip has 3 GPIO pins that can be | |
752 | be controller by this driver. | |
753 | ||
754 | If driver is built as a module it will be called gpio-da9055. | |
755 | ||
756 | config GPIO_DLN2 | |
757 | tristate "Diolan DLN2 GPIO support" | |
758 | depends on MFD_DLN2 | |
759 | select GPIOLIB_IRQCHIP | |
760 | ||
761 | help | |
762 | Select this option to enable GPIO driver for the Diolan DLN2 | |
763 | board. | |
764 | ||
765 | This driver can also be built as a module. If so, the module | |
766 | will be called gpio-dln2. | |
767 | ||
768 | config GPIO_JANZ_TTL | |
769 | tristate "Janz VMOD-TTL Digital IO Module" | |
770 | depends on MFD_JANZ_CMODIO | |
771 | help | |
772 | This enables support for the Janz VMOD-TTL Digital IO module. | |
773 | This driver provides support for driving the pins in output | |
774 | mode only. Input mode is not supported. | |
775 | ||
776 | config GPIO_KEMPLD | |
777 | tristate "Kontron ETX / COMexpress GPIO" | |
778 | depends on MFD_KEMPLD | |
779 | help | |
780 | This enables support for the PLD GPIO interface on some Kontron ETX | |
781 | and COMexpress (ETXexpress) modules. | |
782 | ||
783 | This driver can also be built as a module. If so, the module will be | |
784 | called gpio-kempld. | |
785 | ||
786 | config GPIO_LP3943 | |
787 | tristate "TI/National Semiconductor LP3943 GPIO expander" | |
788 | depends on MFD_LP3943 | |
789 | help | |
790 | GPIO driver for LP3943 MFD. | |
791 | LP3943 can be used as a GPIO expander which provides up to 16 GPIOs. | |
792 | Open drain outputs are required for this usage. | |
793 | ||
794 | config GPIO_MSIC | |
795 | bool "Intel MSIC mixed signal gpio support" | |
796 | depends on MFD_INTEL_MSIC | |
797 | help | |
798 | Enable support for GPIO on intel MSIC controllers found in | |
799 | intel MID devices | |
800 | ||
801 | config GPIO_PALMAS | |
802 | bool "TI PALMAS series PMICs GPIO" | |
803 | depends on MFD_PALMAS | |
804 | help | |
805 | Select this option to enable GPIO driver for the TI PALMAS | |
806 | series chip family. | |
807 | ||
e9fe32bc LD |
808 | config GPIO_RC5T583 |
809 | bool "RICOH RC5T583 GPIO" | |
810 | depends on MFD_RC5T583 | |
811 | help | |
812 | Select this option to enable GPIO driver for the Ricoh RC5T583 | |
813 | chip family. | |
814 | This driver provides the support for driving/reading the gpio pins | |
815 | of RC5T583 device through standard gpio library. | |
816 | ||
03f822f5 RV |
817 | config GPIO_STMPE |
818 | bool "STMPE GPIOs" | |
819 | depends on MFD_STMPE | |
1dfb4a0d | 820 | depends on OF_GPIO |
fe44e70d | 821 | select GPIOLIB_IRQCHIP |
03f822f5 RV |
822 | help |
823 | This enables support for the GPIOs found on the STMPE I/O | |
824 | Expanders. | |
825 | ||
f4e8afdc SI |
826 | config GPIO_TC3589X |
827 | bool "TC3589X GPIOs" | |
828 | depends on MFD_TC3589X | |
1422731d | 829 | depends on OF_GPIO |
cf42f1cf | 830 | select GPIOLIB_IRQCHIP |
d88b25be | 831 | help |
f4e8afdc | 832 | This enables support for the GPIOs found on the TC3589X |
d88b25be RV |
833 | I/O Expander. |
834 | ||
be9cab5b LW |
835 | config GPIO_TIMBERDALE |
836 | bool "Support for timberdale GPIO IP" | |
837 | depends on MFD_TIMBERDALE | |
838 | ---help--- | |
839 | Add support for the GPIO IP in the timberdale FPGA. | |
840 | ||
841 | config GPIO_TPS6586X | |
842 | bool "TPS6586X GPIO" | |
843 | depends on MFD_TPS6586X | |
844 | help | |
845 | Select this option to enable GPIO driver for the TPS6586X | |
846 | chip family. | |
847 | ||
848 | config GPIO_TPS65910 | |
849 | bool "TPS65910 GPIO" | |
850 | depends on MFD_TPS65910 | |
851 | help | |
852 | Select this option to enable GPIO driver for the TPS65910 | |
853 | chip family. | |
854 | ||
668a6cc7 MO |
855 | config GPIO_TPS65912 |
856 | tristate "TI TPS65912 GPIO" | |
857 | depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) | |
858 | help | |
859 | This driver supports TPS65912 gpio chip | |
860 | ||
e9d35947 DB |
861 | config GPIO_TWL4030 |
862 | tristate "TWL4030, TWL5030, and TPS659x0 GPIOs" | |
863 | depends on TWL4030_CORE | |
864 | help | |
865 | Say yes here to access the GPIO signals of various multi-function | |
866 | power management chips from Texas Instruments. | |
867 | ||
70ffd691 PU |
868 | config GPIO_TWL6040 |
869 | tristate "TWL6040 GPO" | |
870 | depends on TWL6040_CORE | |
871 | help | |
872 | Say yes here to access the GPO signals of twl6040 | |
873 | audio chip from Texas Instruments. | |
874 | ||
be9cab5b LW |
875 | config GPIO_UCB1400 |
876 | tristate "Philips UCB1400 GPIO" | |
877 | depends on UCB1400_CORE | |
878 | help | |
879 | This enables support for the Philips UCB1400 GPIO pins. | |
880 | The UCB1400 is an AC97 audio codec. | |
881 | ||
e4b736f1 MB |
882 | config GPIO_WM831X |
883 | tristate "WM831x GPIOs" | |
884 | depends on MFD_WM831X | |
885 | help | |
886 | Say yes here to access the GPIO signals of WM831x power management | |
887 | chips from Wolfson Microelectronics. | |
888 | ||
38f6ce45 MB |
889 | config GPIO_WM8350 |
890 | tristate "WM8350 GPIOs" | |
891 | depends on MFD_WM8350 | |
892 | help | |
893 | Say yes here to access the GPIO signals of WM8350 power management | |
894 | chips from Wolfson Microelectronics. | |
895 | ||
2955c309 MB |
896 | config GPIO_WM8994 |
897 | tristate "WM8994 GPIOs" | |
898 | depends on MFD_WM8994 | |
899 | help | |
900 | Say yes here to access the GPIO signals of WM8994 audio hub | |
901 | CODECs from Wolfson Microelectronics. | |
902 | ||
177b0381 | 903 | endmenu |
ef72af40 | 904 | |
177b0381 LW |
905 | menu "PCI GPIO expanders" |
906 | depends on PCI | |
459773ae | 907 | |
92c33ef7 LW |
908 | config GPIO_AMD8111 |
909 | tristate "AMD 8111 GPIO driver" | |
910 | depends on PCI | |
5e969a40 | 911 | help |
92c33ef7 | 912 | The AMD 8111 south bridge contains 32 GPIO pins which can be used. |
ff1d5c2f | 913 | |
92c33ef7 LW |
914 | Note, that usually system firmware/ACPI handles GPIO pins on their |
915 | own and users might easily break their systems with uncarefull usage | |
916 | of this driver! | |
5f0a96b0 | 917 | |
92c33ef7 | 918 | If unsure, say N |
5f0a96b0 | 919 | |
ff1d5c2f MB |
920 | config GPIO_BT8XX |
921 | tristate "BT8XX GPIO abuser" | |
922 | depends on PCI && VIDEO_BT848=n | |
923 | help | |
22520edc | 924 | The BT8xx frame grabber chip has 24 GPIO pins that can be abused |
ff1d5c2f MB |
925 | as a cheap PCI GPIO card. |
926 | ||
927 | This chip can be found on Miro, Hauppauge and STB TV-cards. | |
928 | ||
929 | The card needs to be physically altered for using it as a | |
930 | GPIO card. For more information on how to build a GPIO card | |
931 | from a BT8xx TV card, see the documentation file at | |
932 | Documentation/bt8xxgpio.txt | |
933 | ||
934 | If unsure, say N. | |
935 | ||
84743ea3 DC |
936 | config GPIO_INTEL_MID |
937 | bool "Intel Mid GPIO support" | |
61ab3fe5 | 938 | depends on PCI && X86 |
fc346270 | 939 | select GPIOLIB_IRQCHIP |
8bf02617 | 940 | help |
84743ea3 | 941 | Say Y here to support Intel Mid GPIO. |
8bf02617 | 942 | |
92c33ef7 LW |
943 | config GPIO_ML_IOH |
944 | tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support" | |
945 | depends on PCI | |
946 | select GENERIC_IRQ_CHIP | |
947 | help | |
948 | ML7213 is companion chip for Intel Atom E6xx series. | |
949 | This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output | |
950 | Hub) which is for IVI(In-Vehicle Infotainment) use. | |
951 | This driver can access the IOH's GPIO device. | |
952 | ||
04c17aa8 | 953 | config GPIO_PCH |
868fea05 | 954 | tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO" |
3ff35cbc | 955 | depends on PCI && (X86_32 || COMPILE_TEST) |
38eb18a6 | 956 | select GENERIC_IRQ_CHIP |
04c17aa8 TM |
957 | help |
958 | This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff | |
959 | which is an IOH(Input/Output Hub) for x86 embedded processor. | |
960 | This driver can access PCH GPIO device. | |
961 | ||
868fea05 TM |
962 | This driver also can be used for LAPIS Semiconductor IOH(Input/ |
963 | Output Hub), ML7223 and ML7831. | |
bc786cce | 964 | ML7223 IOH is for MP(Media Phone) use. |
868fea05 TM |
965 | ML7831 IOH is for general purpose use. |
966 | ML7223/ML7831 is companion chip for Intel Atom E6xx series. | |
967 | ML7223/ML7831 is completely compatible for Intel EG20T PCH. | |
bc786cce | 968 | |
92c33ef7 LW |
969 | config GPIO_RDC321X |
970 | tristate "RDC R-321x GPIO support" | |
49a36793 | 971 | depends on PCI |
92c33ef7 LW |
972 | select MFD_CORE |
973 | select MFD_RDC321X | |
49a36793 | 974 | help |
92c33ef7 LW |
975 | Support for the RDC R321x SoC GPIOs over southbridge |
976 | PCI configuration space. | |
49a36793 | 977 | |
b43ab901 SAS |
978 | config GPIO_SODAVILLE |
979 | bool "Intel Sodaville GPIO support" | |
3ffc9ceb | 980 | depends on X86 && PCI && OF |
b43ab901 SAS |
981 | select GPIO_GENERIC |
982 | select GENERIC_IRQ_CHIP | |
983 | help | |
984 | Say Y here to support Intel Sodaville GPIO. | |
985 | ||
177b0381 | 986 | endmenu |
35570ac6 | 987 | |
177b0381 LW |
988 | menu "SPI GPIO expanders" |
989 | depends on SPI_MASTER | |
9956d02d | 990 | |
a7ec2e7f LW |
991 | config GPIO_74X164 |
992 | tristate "74x164 serial-in/parallel-out 8-bits shift register" | |
0963670a | 993 | depends on OF |
a7ec2e7f LW |
994 | help |
995 | Driver for 74x164 compatible serial-in/parallel-out 8-outputs | |
996 | shift registers. This driver can be used to provide access | |
997 | to more gpio outputs. | |
a9c5fff5 | 998 | |
0c36ec31 JB |
999 | config GPIO_MAX7301 |
1000 | tristate "Maxim MAX7301 GPIO expander" | |
e952805d | 1001 | select GPIO_MAX730X |
0c36ec31 | 1002 | help |
e952805d | 1003 | GPIO driver for Maxim MAX7301 SPI-based GPIO expander. |
0c36ec31 | 1004 | |
1e5db006 RR |
1005 | config GPIO_MC33880 |
1006 | tristate "Freescale MC33880 high-side/low-side switch" | |
1e5db006 RR |
1007 | help |
1008 | SPI driver for Freescale MC33880 high-side/low-side switch. | |
1009 | This provides GPIO interface supporting inputs and outputs. | |
1010 | ||
0963670a LW |
1011 | endmenu |
1012 | ||
1013 | menu "SPI or I2C GPIO expanders" | |
1014 | depends on (SPI_MASTER && !I2C) || I2C | |
1015 | ||
1016 | config GPIO_MCP23S08 | |
1017 | tristate "Microchip MCP23xxx I/O expander" | |
e7aa6d8c | 1018 | help |
0963670a LW |
1019 | SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017 |
1020 | I/O expanders. | |
1021 | This provides a GPIO interface supporting inputs and outputs. | |
1022 | The I2C versions of the chips can be used as interrupt-controller. | |
e7aa6d8c | 1023 | |
177b0381 | 1024 | endmenu |
25cf2507 | 1025 | |
177b0381 LW |
1026 | menu "USB GPIO expanders" |
1027 | depends on USB | |
9d5b72de LP |
1028 | |
1029 | config GPIO_VIPERBOARD | |
1030 | tristate "Viperboard GPIO a & b support" | |
1031 | depends on MFD_VIPERBOARD && USB | |
1032 | help | |
1033 | Say yes here to access the GPIO signals of Nano River | |
1034 | Technologies Viperboard. There are two GPIO chips on the | |
1035 | board: gpioa and gpiob. | |
1036 | See viperboard API specification and Nano | |
1037 | River Tech's viperboard.h for detailed meaning | |
1038 | of the module parameters. | |
1039 | ||
177b0381 | 1040 | endmenu |
6732127f | 1041 | |
7444a72e | 1042 | endif |