[deliverable/linux.git] / drivers / gpio / gpio-mxc.c

/*
 * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
 * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
 *
 * Based on code from Freescale,
 * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 */

#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm-generic/bug.h>

static struct mxc_gpio_port *mxc_gpio_ports;
static int gpio_table_size;

#define cpu_is_mx1_mx2()	(cpu_is_mx1() || cpu_is_mx2())

#define GPIO_DR		(cpu_is_mx1_mx2() ? 0x1c : 0x00)
#define GPIO_GDIR	(cpu_is_mx1_mx2() ? 0x00 : 0x04)
#define GPIO_PSR	(cpu_is_mx1_mx2() ? 0x24 : 0x08)
#define GPIO_ICR1	(cpu_is_mx1_mx2() ? 0x28 : 0x0C)
#define GPIO_ICR2	(cpu_is_mx1_mx2() ? 0x2C : 0x10)
#define GPIO_IMR	(cpu_is_mx1_mx2() ? 0x30 : 0x14)
#define GPIO_ISR	(cpu_is_mx1_mx2() ? 0x34 : 0x18)

#define GPIO_INT_LOW_LEV	(cpu_is_mx1_mx2() ? 0x3 : 0x0)
#define GPIO_INT_HIGH_LEV	(cpu_is_mx1_mx2() ? 0x2 : 0x1)
#define GPIO_INT_RISE_EDGE	(cpu_is_mx1_mx2() ? 0x0 : 0x2)
#define GPIO_INT_FALL_EDGE	(cpu_is_mx1_mx2() ? 0x1 : 0x3)
#define GPIO_INT_NONE		0x4

/* Note: This driver assumes 32 GPIOs are handled in one register */

static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
{
	__raw_writel(1 << index, port->base + GPIO_ISR);
}

static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index,
				int enable)
{
	u32 l;

	l = __raw_readl(port->base + GPIO_IMR);
	l = (l & (~(1 << index))) | (!!enable << index);
	__raw_writel(l, port->base + GPIO_IMR);
}

static void gpio_ack_irq(struct irq_data *d)
{
	u32 gpio = irq_to_gpio(d->irq);
	_clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f);
}

static void gpio_mask_irq(struct irq_data *d)
{
	u32 gpio = irq_to_gpio(d->irq);
	_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0);
}

static void gpio_unmask_irq(struct irq_data *d)
{
	u32 gpio = irq_to_gpio(d->irq);
	_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
}

static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);

static int gpio_set_irq_type(struct irq_data *d, u32 type)
{
	u32 gpio = irq_to_gpio(d->irq);
	struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
	u32 bit, val;
	int edge;
	void __iomem *reg = port->base;

	port->both_edges &= ~(1 << (gpio & 31));
	switch (type) {
	case IRQ_TYPE_EDGE_RISING:
		edge = GPIO_INT_RISE_EDGE;
		break;
	case IRQ_TYPE_EDGE_FALLING:
		edge = GPIO_INT_FALL_EDGE;
		break;
	case IRQ_TYPE_EDGE_BOTH:
		val = mxc_gpio_get(&port->chip, gpio & 31);
		if (val) {
			edge = GPIO_INT_LOW_LEV;
			pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
		} else {
			edge = GPIO_INT_HIGH_LEV;
			pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
		}
		port->both_edges |= 1 << (gpio & 31);
		break;
	case IRQ_TYPE_LEVEL_LOW:
		edge = GPIO_INT_LOW_LEV;
		break;
	case IRQ_TYPE_LEVEL_HIGH:
		edge = GPIO_INT_HIGH_LEV;
		break;
	default:
		return -EINVAL;
	}

	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
	bit = gpio & 0xf;
	val = __raw_readl(reg) & ~(0x3 << (bit << 1));
	__raw_writel(val | (edge << (bit << 1)), reg);
	_clear_gpio_irqstatus(port, gpio & 0x1f);

	return 0;
}

static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
{
	void __iomem *reg = port->base;
	u32 bit, val;
	int edge;

	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
	bit = gpio & 0xf;
	val = __raw_readl(reg);
	edge = (val >> (bit << 1)) & 3;
	val &= ~(0x3 << (bit << 1));
	if (edge == GPIO_INT_HIGH_LEV) {
		edge = GPIO_INT_LOW_LEV;
		pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
	} else if (edge == GPIO_INT_LOW_LEV) {
		edge = GPIO_INT_HIGH_LEV;
		pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
	} else {
		pr_err("mxc: invalid configuration for GPIO %d: %x\n",
		       gpio, edge);
		return;
	}
	__raw_writel(val | (edge << (bit << 1)), reg);
}

/* handle 32 interrupts in one status register */
static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
{
	u32 gpio_irq_no_base = port->virtual_irq_start;

	while (irq_stat != 0) {
		int irqoffset = fls(irq_stat) - 1;

		if (port->both_edges & (1 << irqoffset))
			mxc_flip_edge(port, irqoffset);

		generic_handle_irq(gpio_irq_no_base + irqoffset);

		irq_stat &= ~(1 << irqoffset);
	}
}

/* MX1 and MX3 has one interrupt *per* gpio port */
static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
{
	u32 irq_stat;
	struct mxc_gpio_port *port = irq_get_handler_data(irq);

	irq_stat = __raw_readl(port->base + GPIO_ISR) &
			__raw_readl(port->base + GPIO_IMR);

	mxc_gpio_irq_handler(port, irq_stat);
}

/* MX2 has one interrupt *for all* gpio ports */
static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
{
	int i;
	u32 irq_msk, irq_stat;
	struct mxc_gpio_port *port = irq_get_handler_data(irq);

	/* walk through all interrupt status registers */
	for (i = 0; i < gpio_table_size; i++) {
		irq_msk = __raw_readl(port[i].base + GPIO_IMR);
		if (!irq_msk)
			continue;

		irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk;
		if (irq_stat)
			mxc_gpio_irq_handler(&port[i], irq_stat);
	}
}

/*
 * Set interrupt number "irq" in the GPIO as a wake-up source.
 * While system is running, all registered GPIO interrupts need to have
 * wake-up enabled. When system is suspended, only selected GPIO interrupts
 * need to have wake-up enabled.
 * @param  irq          interrupt source number
 * @param  enable       enable as wake-up if equal to non-zero
 * @return       This function returns 0 on success.
 */
static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
{
	u32 gpio = irq_to_gpio(d->irq);
	u32 gpio_idx = gpio & 0x1F;
	struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];

	if (enable) {
		if (port->irq_high && (gpio_idx >= 16))
			enable_irq_wake(port->irq_high);
		else
			enable_irq_wake(port->irq);
	} else {
		if (port->irq_high && (gpio_idx >= 16))
			disable_irq_wake(port->irq_high);
		else
			disable_irq_wake(port->irq);
	}

	return 0;
}

static struct irq_chip gpio_irq_chip = {
	.name = "GPIO",
	.irq_ack = gpio_ack_irq,
	.irq_mask = gpio_mask_irq,
	.irq_unmask = gpio_unmask_irq,
	.irq_set_type = gpio_set_irq_type,
	.irq_set_wake = gpio_set_wake_irq,
};

static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
				int dir)
{
	struct mxc_gpio_port *port =
		container_of(chip, struct mxc_gpio_port, chip);
	u32 l;
	unsigned long flags;

	spin_lock_irqsave(&port->lock, flags);
	l = __raw_readl(port->base + GPIO_GDIR);
	if (dir)
		l |= 1 << offset;
	else
		l &= ~(1 << offset);
	__raw_writel(l, port->base + GPIO_GDIR);
	spin_unlock_irqrestore(&port->lock, flags);
}

static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
	struct mxc_gpio_port *port =
		container_of(chip, struct mxc_gpio_port, chip);
	void __iomem *reg = port->base + GPIO_DR;
	u32 l;
	unsigned long flags;

	spin_lock_irqsave(&port->lock, flags);
	l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset);
	__raw_writel(l, reg);
	spin_unlock_irqrestore(&port->lock, flags);
}

static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
{
	struct mxc_gpio_port *port =
		container_of(chip, struct mxc_gpio_port, chip);

	return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1;
}

static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
	_set_gpio_direction(chip, offset, 0);
	return 0;
}

static int mxc_gpio_direction_output(struct gpio_chip *chip,
				     unsigned offset, int value)
{
	mxc_gpio_set(chip, offset, value);
	_set_gpio_direction(chip, offset, 1);
	return 0;
}

/*
 * This lock class tells lockdep that GPIO irqs are in a different
 * category than their parents, so it won't report false recursion.
 */
static struct lock_class_key gpio_lock_class;

int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
{
	int i, j;

	/* save for local usage */
	mxc_gpio_ports = port;
	gpio_table_size = cnt;

	printk(KERN_INFO "MXC GPIO hardware\n");

	for (i = 0; i < cnt; i++) {
		/* disable the interrupt and clear the status */
		__raw_writel(0, port[i].base + GPIO_IMR);
		__raw_writel(~0, port[i].base + GPIO_ISR);
		for (j = port[i].virtual_irq_start;
			j < port[i].virtual_irq_start + 32; j++) {
			irq_set_lockdep_class(j, &gpio_lock_class);
			irq_set_chip_and_handler(j, &gpio_irq_chip,
						 handle_level_irq);
			set_irq_flags(j, IRQF_VALID);
		}

		/* register gpio chip */
		port[i].chip.direction_input = mxc_gpio_direction_input;
		port[i].chip.direction_output = mxc_gpio_direction_output;
		port[i].chip.get = mxc_gpio_get;
		port[i].chip.set = mxc_gpio_set;
		port[i].chip.base = i * 32;
		port[i].chip.ngpio = 32;

		spin_lock_init(&port[i].lock);

		/* its a serious configuration bug when it fails */
		BUG_ON( gpiochip_add(&port[i].chip) < 0 );

		if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) {
			/* setup one handler for each entry */
			irq_set_chained_handler(port[i].irq,
						mx3_gpio_irq_handler);
			irq_set_handler_data(port[i].irq, &port[i]);
			if (port[i].irq_high) {
				/* setup handler for GPIO 16 to 31 */
				irq_set_chained_handler(port[i].irq_high,
							mx3_gpio_irq_handler);
				irq_set_handler_data(port[i].irq_high,
						     &port[i]);
			}
		}
	}

	if (cpu_is_mx2()) {
		/* setup one handler for all GPIO interrupts */
		irq_set_chained_handler(port[0].irq, mx2_gpio_irq_handler);
		irq_set_handler_data(port[0].irq, port);
	}

	return 0;
}
Commit	Line	Data
07bd1a6c JB	1	/*
	2	* MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
	3	* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
	4	*
	5	* Based on code from Freescale,
e24798e6	6	* Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
07bd1a6c JB	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License
	10	* as published by the Free Software Foundation; either version 2
	11	* of the License, or (at your option) any later version.
	12	* This program is distributed in the hope that it will be useful,
	13	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	15	* GNU General Public License for more details.
	16	*
	17	* You should have received a copy of the GNU General Public License
	18	* along with this program; if not, write to the Free Software
	19	* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
	20	*/
	21
	22	#include <linux/init.h>
a3484ffd	23	#include <linux/interrupt.h>
07bd1a6c JB	24	#include <linux/io.h>
	25	#include <linux/irq.h>
	26	#include <linux/gpio.h>
a09e64fb	27	#include <mach/hardware.h>
07bd1a6c JB	28	#include <asm-generic/bug.h>
	29
	30	static struct mxc_gpio_port *mxc_gpio_ports;
	31	static int gpio_table_size;
	32
494f22dd SH	33	#define cpu_is_mx1_mx2() (cpu_is_mx1() \|\| cpu_is_mx2())
	34
	35	#define GPIO_DR (cpu_is_mx1_mx2() ? 0x1c : 0x00)
	36	#define GPIO_GDIR (cpu_is_mx1_mx2() ? 0x00 : 0x04)
	37	#define GPIO_PSR (cpu_is_mx1_mx2() ? 0x24 : 0x08)
	38	#define GPIO_ICR1 (cpu_is_mx1_mx2() ? 0x28 : 0x0C)
	39	#define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10)
	40	#define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14)
	41	#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18)
494f22dd SH	42
	43	#define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0)
	44	#define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1)
	45	#define GPIO_INT_RISE_EDGE (cpu_is_mx1_mx2() ? 0x0 : 0x2)
	46	#define GPIO_INT_FALL_EDGE (cpu_is_mx1_mx2() ? 0x1 : 0x3)
	47	#define GPIO_INT_NONE 0x4
	48
07bd1a6c JB	49	/* Note: This driver assumes 32 GPIOs are handled in one register */
	50
	51	static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
	52	{
	53	__raw_writel(1 << index, port->base + GPIO_ISR);
	54	}
	55
	56	static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index,
	57	int enable)
	58	{
	59	u32 l;
	60
	61	l = __raw_readl(port->base + GPIO_IMR);
	62	l = (l & (~(1 << index))) \| (!!enable << index);
	63	__raw_writel(l, port->base + GPIO_IMR);
	64	}
	65
4d93579f	66	static void gpio_ack_irq(struct irq_data *d)
07bd1a6c	67	{
4d93579f	68	u32 gpio = irq_to_gpio(d->irq);
07bd1a6c JB	69	_clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f);
	70	}
	71
4d93579f	72	static void gpio_mask_irq(struct irq_data *d)
07bd1a6c	73	{
4d93579f	74	u32 gpio = irq_to_gpio(d->irq);
07bd1a6c JB	75	_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0);
	76	}
	77
4d93579f	78	static void gpio_unmask_irq(struct irq_data *d)
07bd1a6c	79	{
4d93579f	80	u32 gpio = irq_to_gpio(d->irq);
07bd1a6c JB	81	_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
	82	}
	83
910862ec GL	84	static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
910862ec GL	85
4d93579f	86	static int gpio_set_irq_type(struct irq_data *d, u32 type)
07bd1a6c	87	{
4d93579f	88	u32 gpio = irq_to_gpio(d->irq);
07bd1a6c JB	89	struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
	90	u32 bit, val;
	91	int edge;
	92	void __iomem *reg = port->base;
	93
910862ec	94	port->both_edges &= ~(1 << (gpio & 31));
07bd1a6c	95	switch (type) {
6cab4860	96	case IRQ_TYPE_EDGE_RISING:
07bd1a6c JB	97	edge = GPIO_INT_RISE_EDGE;
07bd1a6c JB	98	break;
6cab4860	99	case IRQ_TYPE_EDGE_FALLING:
07bd1a6c JB	100	edge = GPIO_INT_FALL_EDGE;
07bd1a6c JB	101	break;
910862ec GL	102	case IRQ_TYPE_EDGE_BOTH:
	103	val = mxc_gpio_get(&port->chip, gpio & 31);
	104	if (val) {
	105	edge = GPIO_INT_LOW_LEV;
	106	pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
	107	} else {
	108	edge = GPIO_INT_HIGH_LEV;
	109	pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
	110	}
	111	port->both_edges \|= 1 << (gpio & 31);
	112	break;
6cab4860	113	case IRQ_TYPE_LEVEL_LOW:
07bd1a6c JB	114	edge = GPIO_INT_LOW_LEV;
07bd1a6c JB	115	break;
6cab4860	116	case IRQ_TYPE_LEVEL_HIGH:
07bd1a6c JB	117	edge = GPIO_INT_HIGH_LEV;
07bd1a6c JB	118	break;
910862ec	119	default:
07bd1a6c JB	120	return -EINVAL;
	121	}
	122
	123	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
	124	bit = gpio & 0xf;
	125	val = __raw_readl(reg) & ~(0x3 << (bit << 1));
	126	__raw_writel(val \| (edge << (bit << 1)), reg);
	127	_clear_gpio_irqstatus(port, gpio & 0x1f);
	128
	129	return 0;
	130	}
	131
910862ec GL	132	static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
	133	{
	134	void __iomem *reg = port->base;
	135	u32 bit, val;
	136	int edge;
	137
	138	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
	139	bit = gpio & 0xf;
	140	val = __raw_readl(reg);
	141	edge = (val >> (bit << 1)) & 3;
	142	val &= ~(0x3 << (bit << 1));
3d40f7fe	143	if (edge == GPIO_INT_HIGH_LEV) {
910862ec GL	144	edge = GPIO_INT_LOW_LEV;
910862ec GL	145	pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
3d40f7fe	146	} else if (edge == GPIO_INT_LOW_LEV) {
910862ec GL	147	edge = GPIO_INT_HIGH_LEV;
910862ec GL	148	pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
3d40f7fe	149	} else {
910862ec GL	150	pr_err("mxc: invalid configuration for GPIO %d: %x\n",
	151	gpio, edge);
	152	return;
	153	}
	154	__raw_writel(val \| (edge << (bit << 1)), reg);
	155	}
	156
3621f188	157	/* handle 32 interrupts in one status register */
07bd1a6c JB	158	static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
07bd1a6c JB	159	{
3621f188	160	u32 gpio_irq_no_base = port->virtual_irq_start;
07bd1a6c	161
3621f188 UKK	162	while (irq_stat != 0) {
3621f188 UKK	163	int irqoffset = fls(irq_stat) - 1;
07bd1a6c	164
3621f188 UKK	165	if (port->both_edges & (1 << irqoffset))
3621f188 UKK	166	mxc_flip_edge(port, irqoffset);
910862ec	167
3621f188	168	generic_handle_irq(gpio_irq_no_base + irqoffset);
910862ec	169
3621f188	170	irq_stat &= ~(1 << irqoffset);
07bd1a6c JB	171	}
	172	}
	173
cfca8b53	174	/* MX1 and MX3 has one interrupt per gpio port */
07bd1a6c JB	175	static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
	176	{
	177	u32 irq_stat;
6845664a	178	struct mxc_gpio_port *port = irq_get_handler_data(irq);
07bd1a6c JB	179
	180	irq_stat = __raw_readl(port->base + GPIO_ISR) &
	181	__raw_readl(port->base + GPIO_IMR);
e2c97e7f	182
07bd1a6c JB	183	mxc_gpio_irq_handler(port, irq_stat);
07bd1a6c JB	184	}
07bd1a6c	185
07bd1a6c JB	186	/* MX2 has one interrupt for all gpio ports */
	187	static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
	188	{
	189	int i;
	190	u32 irq_msk, irq_stat;
6845664a	191	struct mxc_gpio_port *port = irq_get_handler_data(irq);
07bd1a6c JB	192
	193	/* walk through all interrupt status registers */
	194	for (i = 0; i < gpio_table_size; i++) {
	195	irq_msk = __raw_readl(port[i].base + GPIO_IMR);
	196	if (!irq_msk)
	197	continue;
	198
	199	irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk;
	200	if (irq_stat)
	201	mxc_gpio_irq_handler(&port[i], irq_stat);
	202	}
	203	}
07bd1a6c	204
a3484ffd DN	205	/*
	206	* Set interrupt number "irq" in the GPIO as a wake-up source.
	207	* While system is running, all registered GPIO interrupts need to have
	208	* wake-up enabled. When system is suspended, only selected GPIO interrupts
	209	* need to have wake-up enabled.
	210	* @param irq interrupt source number
	211	* @param enable enable as wake-up if equal to non-zero
	212	* @return This function returns 0 on success.
	213	*/
4d93579f	214	static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
a3484ffd	215	{
4d93579f	216	u32 gpio = irq_to_gpio(d->irq);
a3484ffd DN	217	u32 gpio_idx = gpio & 0x1F;
	218	struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
	219
	220	if (enable) {
	221	if (port->irq_high && (gpio_idx >= 16))
	222	enable_irq_wake(port->irq_high);
	223	else
	224	enable_irq_wake(port->irq);
	225	} else {
	226	if (port->irq_high && (gpio_idx >= 16))
	227	disable_irq_wake(port->irq_high);
	228	else
	229	disable_irq_wake(port->irq);
	230	}
	231
	232	return 0;
	233	}
	234
07bd1a6c	235	static struct irq_chip gpio_irq_chip = {
039c4644	236	.name = "GPIO",
4d93579f LB	237	.irq_ack = gpio_ack_irq,
	238	.irq_mask = gpio_mask_irq,
	239	.irq_unmask = gpio_unmask_irq,
	240	.irq_set_type = gpio_set_irq_type,
	241	.irq_set_wake = gpio_set_wake_irq,
07bd1a6c JB	242	};
	243
	244	static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
	245	int dir)
	246	{
	247	struct mxc_gpio_port *port =
	248	container_of(chip, struct mxc_gpio_port, chip);
	249	u32 l;
14cb0deb	250	unsigned long flags;
07bd1a6c	251
14cb0deb	252	spin_lock_irqsave(&port->lock, flags);
07bd1a6c JB	253	l = __raw_readl(port->base + GPIO_GDIR);
	254	if (dir)
	255	l \|= 1 << offset;
	256	else
	257	l &= ~(1 << offset);
	258	__raw_writel(l, port->base + GPIO_GDIR);
14cb0deb	259	spin_unlock_irqrestore(&port->lock, flags);
07bd1a6c JB	260	}
	261
	262	static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
	263	{
	264	struct mxc_gpio_port *port =
	265	container_of(chip, struct mxc_gpio_port, chip);
	266	void __iomem *reg = port->base + GPIO_DR;
	267	u32 l;
14cb0deb	268	unsigned long flags;
07bd1a6c	269
14cb0deb	270	spin_lock_irqsave(&port->lock, flags);
886ab3da	271	l = (__raw_readl(reg) & (~(1 << offset))) \| (!!value << offset);
07bd1a6c	272	__raw_writel(l, reg);
14cb0deb	273	spin_unlock_irqrestore(&port->lock, flags);
07bd1a6c JB	274	}
	275
	276	static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
	277	{
	278	struct mxc_gpio_port *port =
	279	container_of(chip, struct mxc_gpio_port, chip);
	280
5cac9d65	281	return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1;
07bd1a6c JB	282	}
	283
	284	static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
	285	{
	286	_set_gpio_direction(chip, offset, 0);
	287	return 0;
	288	}
	289
	290	static int mxc_gpio_direction_output(struct gpio_chip *chip,
	291	unsigned offset, int value)
	292	{
07bd1a6c	293	mxc_gpio_set(chip, offset, value);
999981d9	294	_set_gpio_direction(chip, offset, 1);
07bd1a6c JB	295	return 0;
	296	}
	297
b5eee2fd TG	298	/*
	299	* This lock class tells lockdep that GPIO irqs are in a different
	300	* category than their parents, so it won't report false recursion.
	301	*/
	302	static struct lock_class_key gpio_lock_class;
	303
07bd1a6c JB	304	int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
	305	{
	306	int i, j;
	307
	308	/* save for local usage */
	309	mxc_gpio_ports = port;
	310	gpio_table_size = cnt;
	311
	312	printk(KERN_INFO "MXC GPIO hardware\n");
	313
	314	for (i = 0; i < cnt; i++) {
	315	/* disable the interrupt and clear the status */
	316	__raw_writel(0, port[i].base + GPIO_IMR);
	317	__raw_writel(~0, port[i].base + GPIO_ISR);
	318	for (j = port[i].virtual_irq_start;
	319	j < port[i].virtual_irq_start + 32; j++) {
b5eee2fd	320	irq_set_lockdep_class(j, &gpio_lock_class);
f38c02f3 TG	321	irq_set_chip_and_handler(j, &gpio_irq_chip,
f38c02f3 TG	322	handle_level_irq);
07bd1a6c JB	323	set_irq_flags(j, IRQF_VALID);
	324	}
	325
	326	/* register gpio chip */
	327	port[i].chip.direction_input = mxc_gpio_direction_input;
	328	port[i].chip.direction_output = mxc_gpio_direction_output;
	329	port[i].chip.get = mxc_gpio_get;
	330	port[i].chip.set = mxc_gpio_set;
	331	port[i].chip.base = i * 32;
	332	port[i].chip.ngpio = 32;
	333
14cb0deb BS	334	spin_lock_init(&port[i].lock);
14cb0deb BS	335
07bd1a6c JB	336	/* its a serious configuration bug when it fails */
	337	BUG_ON( gpiochip_add(&port[i].chip) < 0 );
	338
e24798e6	339	if (cpu_is_mx1() \|\| cpu_is_mx3() \|\| cpu_is_mx25() \|\| cpu_is_mx51()) {
8afaada2	340	/* setup one handler for each entry */
6845664a TG	341	irq_set_chained_handler(port[i].irq,
	342	mx3_gpio_irq_handler);
	343	irq_set_handler_data(port[i].irq, &port[i]);
aa872143 EB	344	if (port[i].irq_high) {
aa872143 EB	345	/* setup handler for GPIO 16 to 31 */
6845664a TG	346	irq_set_chained_handler(port[i].irq_high,
	347	mx3_gpio_irq_handler);
	348	irq_set_handler_data(port[i].irq_high,
	349	&port[i]);
aa872143	350	}
8afaada2 SH	351	}
	352	}
	353
	354	if (cpu_is_mx2()) {
	355	/* setup one handler for all GPIO interrupts */
6845664a TG	356	irq_set_chained_handler(port[0].irq, mx2_gpio_irq_handler);
6845664a TG	357	irq_set_handler_data(port[0].irq, port);
07bd1a6c JB	358	}
07bd1a6c JB	359
07bd1a6c JB	360	return 0;
07bd1a6c JB	361	}