[deliverable/linux.git] / drivers / gpu / drm / Kconfig

#
# Drm device configuration
#
# This driver provides support for the
# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
#
menuconfig DRM
	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
	depends on (AGP || AGP=n) && PCI && !EMULATED_CMPXCHG && MMU
	select I2C
	select I2C_ALGOBIT
	help
	  Kernel-level support for the Direct Rendering Infrastructure (DRI)
	  introduced in XFree86 4.0. If you say Y here, you need to select
	  the module that's right for your graphics card from the list below.
	  These modules provide support for synchronization, security, and
	  DMA transfers. Please see <http://dri.sourceforge.net/> for more
	  details.  You should also select and configure AGP
	  (/dev/agpgart) support.

config DRM_TTM
	tristate
	depends on DRM
	help
	  GPU memory management subsystem for devices with multiple
	  GPU memory types. Will be enabled automatically if a device driver
	  uses it.

config DRM_TDFX
	tristate "3dfx Banshee/Voodoo3+"
	depends on DRM && PCI
	help
	  Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
	  graphics card.  If M is selected, the module will be called tdfx.

config DRM_R128
	tristate "ATI Rage 128"
	depends on DRM && PCI
	help
	  Choose this option if you have an ATI Rage 128 graphics card.  If M
	  is selected, the module will be called r128.  AGP support for
	  this card is strongly suggested (unless you have a PCI version).

config DRM_RADEON
	tristate "ATI Radeon"
	depends on DRM && PCI
	select FB_CFB_FILLRECT
	select FB_CFB_COPYAREA
	select FB_CFB_IMAGEBLIT
	select FB
	select FRAMEBUFFER_CONSOLE if !EMBEDDED
	help
	  Choose this option if you have an ATI Radeon graphics card.  There
	  are both PCI and AGP versions.  You don't need to choose this to
	  run the Radeon in plain VGA mode.

	  If M is selected, the module will be called radeon.

config DRM_I810
	tristate "Intel I810"
	depends on DRM && AGP && AGP_INTEL
	help
	  Choose this option if you have an Intel I810 graphics card.  If M is
	  selected, the module will be called i810.  AGP support is required
	  for this driver to work.

choice
	prompt "Intel 830M, 845G, 852GM, 855GM, 865G"
	depends on DRM && AGP && AGP_INTEL
	optional

config DRM_I830
	tristate "i830 driver"
	help
	  Choose this option if you have a system that has Intel 830M, 845G,
	  852GM, 855GM or 865G integrated graphics.  If M is selected, the
	  module will be called i830.  AGP support is required for this driver
	  to work. This driver is used by the older X releases X.org 6.7 and
	  XFree86 4.3. If unsure, build this and i915 as modules and the X server
	  will load the correct one.

config DRM_I915
	tristate "i915 driver"
	depends on AGP_INTEL
	select FB_CFB_FILLRECT
	select FB_CFB_COPYAREA
	select FB_CFB_IMAGEBLIT
	select FB
	select FRAMEBUFFER_CONSOLE if !EMBEDDED
	# i915 depends on ACPI_VIDEO when ACPI is enabled
	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
	select VIDEO_OUTPUT_CONTROL if ACPI
	select BACKLIGHT_CLASS_DEVICE if ACPI
	select INPUT if ACPI
	select ACPI_VIDEO if ACPI
	help
	  Choose this option if you have a system that has Intel 830M, 845G,
	  852GM, 855GM 865G or 915G integrated graphics.  If M is selected, the
	  module will be called i915.  AGP support is required for this driver
	  to work. This driver is used by the Intel driver in X.org 6.8 and
	  XFree86 4.4 and above. If unsure, build this and i830 as modules and
	  the X server will load the correct one.

config DRM_I915_KMS
	bool "Enable modesetting on intel by default"
	depends on DRM_I915
	help
	  Choose this option if you want kernel modesetting enabled by default,
	  and you have a new enough userspace to support this. Running old
	  userspaces with this enabled will cause pain.  Note that this causes
	  the driver to bind to PCI devices, which precludes loading things
	  like intelfb.

endchoice

config DRM_MGA
	tristate "Matrox g200/g400"
	depends on DRM
	help
	  Choose this option if you have a Matrox G200, G400 or G450 graphics
	  card.  If M is selected, the module will be called mga.  AGP
	  support is required for this driver to work.

config DRM_SIS
	tristate "SiS video cards"
	depends on DRM && AGP
	depends on FB_SIS || FB_SIS=n
	help
	  Choose this option if you have a SiS 630 or compatible video
          chipset. If M is selected the module will be called sis. AGP
          support is required for this driver to work.

config DRM_VIA
	tristate "Via unichrome video cards"
	depends on DRM
	help
	  Choose this option if you have a Via unichrome or compatible video
	  chipset. If M is selected the module will be called via.

config DRM_SAVAGE
	tristate "Savage video cards"
	depends on DRM
	help
	  Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
	  chipset. If M is selected the module will be called savage.
Commit	Line	Data
1da177e4 LT	1	#
	2	# Drm device configuration
	3	#
	4	# This driver provides support for the
	5	# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
	6	#
179b025f	7	menuconfig DRM
1da177e4	8	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
e798ba57	9	depends on (AGP \|\| AGP=n) && PCI && !EMULATED_CMPXCHG && MMU
57a6297e DA	10	select I2C
57a6297e DA	11	select I2C_ALGOBIT
1da177e4 LT	12	help
	13	Kernel-level support for the Direct Rendering Infrastructure (DRI)
	14	introduced in XFree86 4.0. If you say Y here, you need to select
	15	the module that's right for your graphics card from the list below.
	16	These modules provide support for synchronization, security, and
	17	DMA transfers. Please see <http://dri.sourceforge.net/> for more
	18	details. You should also select and configure AGP
	19	(/dev/agpgart) support.
	20
ba4e7d97	21	config DRM_TTM
771fe6b9	22	tristate
ba4e7d97 TH	23	depends on DRM
	24	help
	25	GPU memory management subsystem for devices with multiple
	26	GPU memory types. Will be enabled automatically if a device driver
	27	uses it.
	28
1da177e4 LT	29	config DRM_TDFX
	30	tristate "3dfx Banshee/Voodoo3+"
	31	depends on DRM && PCI
	32	help
	33	Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
	34	graphics card. If M is selected, the module will be called tdfx.
	35
1da177e4 LT	36	config DRM_R128
	37	tristate "ATI Rage 128"
	38	depends on DRM && PCI
	39	help
	40	Choose this option if you have an ATI Rage 128 graphics card. If M
	41	is selected, the module will be called r128. AGP support for
	42	this card is strongly suggested (unless you have a PCI version).
	43
	44	config DRM_RADEON
	45	tristate "ATI Radeon"
	46	depends on DRM && PCI
771fe6b9 JG	47	select FB_CFB_FILLRECT
	48	select FB_CFB_COPYAREA
	49	select FB_CFB_IMAGEBLIT
	50	select FB
	51	select FRAMEBUFFER_CONSOLE if !EMBEDDED
1da177e4 LT	52	help
	53	Choose this option if you have an ATI Radeon graphics card. There
	54	are both PCI and AGP versions. You don't need to choose this to
7b9af345	55	run the Radeon in plain VGA mode.
bc5f4523	56
1da177e4 LT	57	If M is selected, the module will be called radeon.
	58
	59	config DRM_I810
	60	tristate "Intel I810"
	61	depends on DRM && AGP && AGP_INTEL
	62	help
	63	Choose this option if you have an Intel I810 graphics card. If M is
	64	selected, the module will be called i810. AGP support is required
	65	for this driver to work.
	66
	67	choice
	68	prompt "Intel 830M, 845G, 852GM, 855GM, 865G"
	69	depends on DRM && AGP && AGP_INTEL
	70	optional
	71
	72	config DRM_I830
	73	tristate "i830 driver"
	74	help
	75	Choose this option if you have a system that has Intel 830M, 845G,
	76	852GM, 855GM or 865G integrated graphics. If M is selected, the
	77	module will be called i830. AGP support is required for this driver
d000b486 DA	78	to work. This driver is used by the older X releases X.org 6.7 and
	79	XFree86 4.3. If unsure, build this and i915 as modules and the X server
	80	will load the correct one.
1da177e4 LT	81
1da177e4 LT	82	config DRM_I915
31db5645	83	tristate "i915 driver"
8c52da50	84	depends on AGP_INTEL
06d9f33c EA	85	select FB_CFB_FILLRECT
	86	select FB_CFB_COPYAREA
	87	select FB_CFB_IMAGEBLIT
d2f59357	88	select FB
f29ce727	89	select FRAMEBUFFER_CONSOLE if !EMBEDDED
31db5645 LB	90	# i915 depends on ACPI_VIDEO when ACPI is enabled
	91	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
	92	select VIDEO_OUTPUT_CONTROL if ACPI
	93	select BACKLIGHT_CLASS_DEVICE if ACPI
	94	select INPUT if ACPI
	95	select ACPI_VIDEO if ACPI
1da177e4 LT	96	help
	97	Choose this option if you have a system that has Intel 830M, 845G,
	98	852GM, 855GM 865G or 915G integrated graphics. If M is selected, the
	99	module will be called i915. AGP support is required for this driver
d000b486	100	to work. This driver is used by the Intel driver in X.org 6.8 and
bc5f4523	101	XFree86 4.4 and above. If unsure, build this and i830 as modules and
d000b486	102	the X server will load the correct one.
bc5f4523	103
79e53945 JB	104	config DRM_I915_KMS
	105	bool "Enable modesetting on intel by default"
	106	depends on DRM_I915
	107	help
a1a5c3b9 KH	108	Choose this option if you want kernel modesetting enabled by default,
	109	and you have a new enough userspace to support this. Running old
	110	userspaces with this enabled will cause pain. Note that this causes
	111	the driver to bind to PCI devices, which precludes loading things
	112	like intelfb.
79e53945	113
a1a5c3b9	114	endchoice
79e53945	115
1da177e4 LT	116	config DRM_MGA
1da177e4 LT	117	tristate "Matrox g200/g400"
6795c985	118	depends on DRM
1da177e4 LT	119	help
	120	Choose this option if you have a Matrox G200, G400 or G450 graphics
	121	card. If M is selected, the module will be called mga. AGP
	122	support is required for this driver to work.
	123
	124	config DRM_SIS
	125	tristate "SiS video cards"
	126	depends on DRM && AGP
dfcf96d0	127	depends on FB_SIS \|\| FB_SIS=n
1da177e4	128	help
bc5f4523	129	Choose this option if you have a SiS 630 or compatible video
1da177e4 LT	130	chipset. If M is selected the module will be called sis. AGP
	131	support is required for this driver to work.
	132
22f579c6 DA	133	config DRM_VIA
	134	tristate "Via unichrome video cards"
	135	depends on DRM
	136	help
	137	Choose this option if you have a Via unichrome or compatible video
	138	chipset. If M is selected the module will be called via.
	139
282a1674 DA	140	config DRM_SAVAGE
	141	tristate "Savage video cards"
	142	depends on DRM
	143	help
	144	Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
	145	chipset. If M is selected the module will be called savage.