drm/i915: Mark elsps submitted when they are pushed to hw

[deliverable/linux.git] / drivers / gpu / drm / i915 / intel_atomic.c

/*
 * Copyright © 2015 Intel Corporation
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 * DEALINGS IN THE SOFTWARE.
 */

/**
 * DOC: atomic modeset support
 *
 * The functions here implement the state management and hardware programming
 * dispatch required by the atomic modeset infrastructure.
 * See intel_atomic_plane.c for the plane-specific atomic functionality.
 */

#include <drm/drmP.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_plane_helper.h>
#include "intel_drv.h"


/**
 * intel_atomic_check - validate state object
 * @dev: drm device
 * @state: state to validate
 */
int intel_atomic_check(struct drm_device *dev,
		       struct drm_atomic_state *state)
{
	int nplanes = dev->mode_config.num_total_plane;
	int ncrtcs = dev->mode_config.num_crtc;
	int nconnectors = dev->mode_config.num_connector;
	enum pipe nuclear_pipe = INVALID_PIPE;
	struct intel_crtc *nuclear_crtc = NULL;
	struct intel_crtc_state *crtc_state = NULL;
	int ret;
	int i;
	bool not_nuclear = false;

	to_intel_atomic_state(state)->cdclk = to_i915(dev)->cdclk_freq;

	/*
	 * FIXME:  At the moment, we only support "nuclear pageflip" on a
	 * single CRTC.  Cross-crtc updates will be added later.
	 */
	for (i = 0; i < nplanes; i++) {
		struct intel_plane *plane = to_intel_plane(state->planes[i]);
		if (!plane)
			continue;

		if (nuclear_pipe == INVALID_PIPE) {
			nuclear_pipe = plane->pipe;
		} else if (nuclear_pipe != plane->pipe) {
			DRM_DEBUG_KMS("i915 only support atomic plane operations on a single CRTC at the moment\n");
			return -EINVAL;
		}
	}

	/*
	 * FIXME:  We only handle planes for now; make sure there are no CRTC's
	 * or connectors involved.
	 */
	state->allow_modeset = false;
	for (i = 0; i < ncrtcs; i++) {
		struct intel_crtc *crtc = to_intel_crtc(state->crtcs[i]);
		if (crtc)
			memset(&crtc->atomic, 0, sizeof(crtc->atomic));
		if (crtc && crtc->pipe != nuclear_pipe)
			not_nuclear = true;
		if (crtc && crtc->pipe == nuclear_pipe) {
			nuclear_crtc = crtc;
			crtc_state = to_intel_crtc_state(state->crtc_states[i]);
		}
	}
	for (i = 0; i < nconnectors; i++)
		if (state->connectors[i] != NULL)
			not_nuclear = true;

	if (not_nuclear) {
		DRM_DEBUG_KMS("i915 only supports atomic plane operations at the moment\n");
		return -EINVAL;
	}

	if (crtc_state &&
	    crtc_state->quirks & PIPE_CONFIG_QUIRK_INITIAL_PLANES) {
		ret = drm_atomic_add_affected_planes(state, &nuclear_crtc->base);
		if (ret)
			return ret;
	}

	ret = drm_atomic_helper_check_planes(dev, state);
	if (ret)
		return ret;

	return ret;
}


/**
 * intel_atomic_commit - commit validated state object
 * @dev: DRM device
 * @state: the top-level driver state object
 * @async: asynchronous commit
 *
 * This function commits a top-level state object that has been validated
 * with drm_atomic_helper_check().
 *
 * FIXME:  Atomic modeset support for i915 is not yet complete.  At the moment
 * we can only handle plane-related operations and do not yet support
 * asynchronous commit.
 *
 * RETURNS
 * Zero for success or -errno.
 */
int intel_atomic_commit(struct drm_device *dev,
			struct drm_atomic_state *state,
			bool async)
{
	struct drm_crtc_state *crtc_state;
	struct drm_crtc *crtc;
	int ret;
	int i;

	if (async) {
		DRM_DEBUG_KMS("i915 does not yet support async commit\n");
		return -EINVAL;
	}

	ret = drm_atomic_helper_prepare_planes(dev, state);
	if (ret)
		return ret;

	/* Point of no return */
	drm_atomic_helper_swap_state(dev, state);

	for_each_crtc_in_state(state, crtc, crtc_state, i) {
		to_intel_crtc(crtc)->config = to_intel_crtc_state(crtc->state);

		drm_atomic_helper_commit_planes_on_crtc(crtc_state);
	}

	/* FIXME: This function should eventually call __intel_set_mode when needed */

	drm_atomic_helper_wait_for_vblanks(dev, state);
	drm_atomic_helper_cleanup_planes(dev, state);
	drm_atomic_state_free(state);

	return 0;
}

/**
 * intel_connector_atomic_get_property - fetch connector property value
 * @connector: connector to fetch property for
 * @state: state containing the property value
 * @property: property to look up
 * @val: pointer to write property value into
 *
 * The DRM core does not store shadow copies of properties for
 * atomic-capable drivers.  This entrypoint is used to fetch
 * the current value of a driver-specific connector property.
 */
int
intel_connector_atomic_get_property(struct drm_connector *connector,
				    const struct drm_connector_state *state,
				    struct drm_property *property,
				    uint64_t *val)
{
	int i;

	/*
	 * TODO: We only have atomic modeset for planes at the moment, so the
	 * crtc/connector code isn't quite ready yet.  Until it's ready,
	 * continue to look up all property values in the DRM's shadow copy
	 * in obj->properties->values[].
	 *
	 * When the crtc/connector state work matures, this function should
	 * be updated to read the values out of the state structure instead.
	 */
	for (i = 0; i < connector->base.properties->count; i++) {
		if (connector->base.properties->properties[i] == property) {
			*val = connector->base.properties->values[i];
			return 0;
		}
	}

	return -EINVAL;
}

/*
 * intel_crtc_duplicate_state - duplicate crtc state
 * @crtc: drm crtc
 *
 * Allocates and returns a copy of the crtc state (both common and
 * Intel-specific) for the specified crtc.
 *
 * Returns: The newly allocated crtc state, or NULL on failure.
 */
struct drm_crtc_state *
intel_crtc_duplicate_state(struct drm_crtc *crtc)
{
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
	struct intel_crtc_state *crtc_state;

	if (WARN_ON(!intel_crtc->config))
		crtc_state = kzalloc(sizeof(*crtc_state), GFP_KERNEL);
	else
		crtc_state = kmemdup(intel_crtc->config,
				     sizeof(*intel_crtc->config), GFP_KERNEL);

	if (!crtc_state)
		return NULL;

	__drm_atomic_helper_crtc_duplicate_state(crtc, &crtc_state->base);

	crtc_state->base.crtc = crtc;

	return &crtc_state->base;
}

/**
 * intel_crtc_destroy_state - destroy crtc state
 * @crtc: drm crtc
 *
 * Destroys the crtc state (both common and Intel-specific) for the
 * specified crtc.
 */
void
intel_crtc_destroy_state(struct drm_crtc *crtc,
			  struct drm_crtc_state *state)
{
	drm_atomic_helper_crtc_destroy_state(crtc, state);
}

/**
 * intel_atomic_setup_scalers() - setup scalers for crtc per staged requests
 * @dev: DRM device
 * @crtc: intel crtc
 * @crtc_state: incoming crtc_state to validate and setup scalers
 *
 * This function sets up scalers based on staged scaling requests for
 * a @crtc and its planes. It is called from crtc level check path. If request
 * is a supportable request, it attaches scalers to requested planes and crtc.
 *
 * This function takes into account the current scaler(s) in use by any planes
 * not being part of this atomic state
 *
 *  Returns:
 *         0 - scalers were setup succesfully
 *         error code - otherwise
 */
int intel_atomic_setup_scalers(struct drm_device *dev,
	struct intel_crtc *intel_crtc,
	struct intel_crtc_state *crtc_state)
{
	struct drm_plane *plane = NULL;
	struct intel_plane *intel_plane;
	struct intel_plane_state *plane_state = NULL;
	struct intel_crtc_scaler_state *scaler_state;
	struct drm_atomic_state *drm_state;
	int num_scalers_need;
	int i, j;

	if (INTEL_INFO(dev)->gen < 9 || !intel_crtc || !crtc_state)
		return 0;

	scaler_state = &crtc_state->scaler_state;
	drm_state = crtc_state->base.state;

	num_scalers_need = hweight32(scaler_state->scaler_users);
	DRM_DEBUG_KMS("crtc_state = %p need = %d avail = %d scaler_users = 0x%x\n",
		crtc_state, num_scalers_need, intel_crtc->num_scalers,
		scaler_state->scaler_users);

	/*
	 * High level flow:
	 * - staged scaler requests are already in scaler_state->scaler_users
	 * - check whether staged scaling requests can be supported
	 * - add planes using scalers that aren't in current transaction
	 * - assign scalers to requested users
	 * - as part of plane commit, scalers will be committed
	 *   (i.e., either attached or detached) to respective planes in hw
	 * - as part of crtc_commit, scaler will be either attached or detached
	 *   to crtc in hw
	 */

	/* fail if required scalers > available scalers */
	if (num_scalers_need > intel_crtc->num_scalers){
		DRM_DEBUG_KMS("Too many scaling requests %d > %d\n",
			num_scalers_need, intel_crtc->num_scalers);
		return -EINVAL;
	}

	/* walkthrough scaler_users bits and start assigning scalers */
	for (i = 0; i < sizeof(scaler_state->scaler_users) * 8; i++) {
		int *scaler_id;
		const char *name;
		int idx;

		/* skip if scaler not required */
		if (!(scaler_state->scaler_users & (1 << i)))
			continue;

		if (i == SKL_CRTC_INDEX) {
			name = "CRTC";
			idx = intel_crtc->base.base.id;

			/* panel fitter case: assign as a crtc scaler */
			scaler_id = &scaler_state->scaler_id;
		} else {
			name = "PLANE";
			idx = plane->base.id;

			if (!drm_state)
				continue;

			/* plane scaler case: assign as a plane scaler */
			/* find the plane that set the bit as scaler_user */
			plane = drm_state->planes[i];

			/*
			 * to enable/disable hq mode, add planes that are using scaler
			 * into this transaction
			 */
			if (!plane) {
				struct drm_plane_state *state;
				plane = drm_plane_from_index(dev, i);
				state = drm_atomic_get_plane_state(drm_state, plane);
				if (IS_ERR(state)) {
					DRM_DEBUG_KMS("Failed to add [PLANE:%d] to drm_state\n",
						plane->base.id);
					return PTR_ERR(state);
				}

				/*
				 * the plane is added after plane checks are run,
				 * but since this plane is unchanged just do the
				 * minimum required validation.
				 */
				if (plane->type == DRM_PLANE_TYPE_PRIMARY)
					intel_crtc->atomic.wait_for_flips = true;
				crtc_state->base.planes_changed = true;
			}

			intel_plane = to_intel_plane(plane);

			/* plane on different crtc cannot be a scaler user of this crtc */
			if (WARN_ON(intel_plane->pipe != intel_crtc->pipe)) {
				continue;
			}

			plane_state = to_intel_plane_state(drm_state->plane_states[i]);
			scaler_id = &plane_state->scaler_id;
		}

		if (*scaler_id < 0) {
			/* find a free scaler */
			for (j = 0; j < intel_crtc->num_scalers; j++) {
				if (!scaler_state->scalers[j].in_use) {
					scaler_state->scalers[j].in_use = 1;
					*scaler_id = j;
					DRM_DEBUG_KMS("Attached scaler id %u.%u to %s:%d\n",
						intel_crtc->pipe, *scaler_id, name, idx);
					break;
				}
			}
		}

		if (WARN_ON(*scaler_id < 0)) {
			DRM_DEBUG_KMS("Cannot find scaler for %s:%d\n", name, idx);
			continue;
		}

		/* set scaler mode */
		if (num_scalers_need == 1 && intel_crtc->pipe != PIPE_C) {
			/*
			 * when only 1 scaler is in use on either pipe A or B,
			 * scaler 0 operates in high quality (HQ) mode.
			 * In this case use scaler 0 to take advantage of HQ mode
			 */
			*scaler_id = 0;
			scaler_state->scalers[0].in_use = 1;
			scaler_state->scalers[0].mode = PS_SCALER_MODE_HQ;
			scaler_state->scalers[1].in_use = 0;
		} else {
			scaler_state->scalers[*scaler_id].mode = PS_SCALER_MODE_DYN;
		}
	}

	return 0;
}

static void
intel_atomic_duplicate_dpll_state(struct drm_i915_private *dev_priv,
				  struct intel_shared_dpll_config *shared_dpll)
{
	enum intel_dpll_id i;

	/* Copy shared dpll state */
	for (i = 0; i < dev_priv->num_shared_dpll; i++) {
		struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];

		shared_dpll[i] = pll->config;
	}
}

struct intel_shared_dpll_config *
intel_atomic_get_shared_dpll_state(struct drm_atomic_state *s)
{
	struct intel_atomic_state *state = to_intel_atomic_state(s);

	WARN_ON(!drm_modeset_is_locked(&s->dev->mode_config.connection_mutex));

	if (!state->dpll_set) {
		state->dpll_set = true;

		intel_atomic_duplicate_dpll_state(to_i915(s->dev),
						  state->shared_dpll);
	}

	return state->shared_dpll;
}

struct drm_atomic_state *
intel_atomic_state_alloc(struct drm_device *dev)
{
	struct intel_atomic_state *state = kzalloc(sizeof(*state), GFP_KERNEL);

	if (!state || drm_atomic_state_init(dev, &state->base) < 0) {
		kfree(state);
		return NULL;
	}

	return &state->base;
}

void intel_atomic_state_clear(struct drm_atomic_state *s)
{
	struct intel_atomic_state *state = to_intel_atomic_state(s);
	drm_atomic_state_default_clear(&state->base);
	state->dpll_set = false;
}