Commit | Line | Data |
---|---|---|
ca2dcd40 BN |
1 | /* |
2 | * Bluetooth Wacom Tablet support | |
3 | * | |
4 | * Copyright (c) 1999 Andreas Gal | |
5 | * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> | |
6 | * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc | |
7 | * Copyright (c) 2006-2007 Jiri Kosina | |
8 | * Copyright (c) 2007 Paul Walmsley | |
9 | * Copyright (c) 2008 Jiri Slaby <jirislaby@gmail.com> | |
10 | * Copyright (c) 2006 Andrew Zabolotny <zap@homelink.ru> | |
11 | * Copyright (c) 2009 Bastien Nocera <hadess@hadess.net> | |
12 | */ | |
13 | ||
14 | /* | |
15 | * This program is free software; you can redistribute it and/or modify it | |
16 | * under the terms of the GNU General Public License as published by the Free | |
17 | * Software Foundation; either version 2 of the License, or (at your option) | |
18 | * any later version. | |
19 | */ | |
20 | ||
21 | #include <linux/device.h> | |
22 | #include <linux/hid.h> | |
23 | #include <linux/module.h> | |
24 | ||
25 | #include "hid-ids.h" | |
26 | ||
27 | struct wacom_data { | |
28 | __u16 tool; | |
29 | unsigned char butstate; | |
30 | }; | |
31 | ||
32 | static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report, | |
33 | u8 *raw_data, int size) | |
34 | { | |
35 | struct wacom_data *wdata = hid_get_drvdata(hdev); | |
36 | struct hid_input *hidinput; | |
37 | struct input_dev *input; | |
38 | unsigned char *data = (unsigned char *) raw_data; | |
39 | int tool, x, y, rw; | |
40 | ||
41 | if (!(hdev->claimed & HID_CLAIMED_INPUT)) | |
42 | return 0; | |
43 | ||
44 | tool = 0; | |
45 | hidinput = list_entry(hdev->inputs.next, struct hid_input, list); | |
46 | input = hidinput->input; | |
47 | ||
48 | /* Check if this is a tablet report */ | |
49 | if (data[0] != 0x03) | |
50 | return 0; | |
51 | ||
52 | /* Get X & Y positions */ | |
53 | x = le16_to_cpu(*(__le16 *) &data[2]); | |
54 | y = le16_to_cpu(*(__le16 *) &data[4]); | |
55 | ||
56 | /* Get current tool identifier */ | |
57 | if (data[1] & 0x90) { /* If pen is in the in/active area */ | |
58 | switch ((data[1] >> 5) & 3) { | |
59 | case 0: /* Pen */ | |
60 | tool = BTN_TOOL_PEN; | |
61 | break; | |
62 | ||
63 | case 1: /* Rubber */ | |
64 | tool = BTN_TOOL_RUBBER; | |
65 | break; | |
66 | ||
67 | case 2: /* Mouse with wheel */ | |
68 | case 3: /* Mouse without wheel */ | |
69 | tool = BTN_TOOL_MOUSE; | |
70 | break; | |
71 | } | |
72 | ||
73 | /* Reset tool if out of active tablet area */ | |
74 | if (!(data[1] & 0x10)) | |
75 | tool = 0; | |
76 | } | |
77 | ||
78 | /* If tool changed, notify input subsystem */ | |
79 | if (wdata->tool != tool) { | |
80 | if (wdata->tool) { | |
81 | /* Completely reset old tool state */ | |
82 | if (wdata->tool == BTN_TOOL_MOUSE) { | |
83 | input_report_key(input, BTN_LEFT, 0); | |
84 | input_report_key(input, BTN_RIGHT, 0); | |
85 | input_report_key(input, BTN_MIDDLE, 0); | |
86 | input_report_abs(input, ABS_DISTANCE, | |
87 | input->absmax[ABS_DISTANCE]); | |
88 | } else { | |
89 | input_report_key(input, BTN_TOUCH, 0); | |
90 | input_report_key(input, BTN_STYLUS, 0); | |
91 | input_report_key(input, BTN_STYLUS2, 0); | |
92 | input_report_abs(input, ABS_PRESSURE, 0); | |
93 | } | |
94 | input_report_key(input, wdata->tool, 0); | |
95 | input_sync(input); | |
96 | } | |
97 | wdata->tool = tool; | |
98 | if (tool) | |
99 | input_report_key(input, tool, 1); | |
100 | } | |
101 | ||
102 | if (tool) { | |
103 | input_report_abs(input, ABS_X, x); | |
104 | input_report_abs(input, ABS_Y, y); | |
105 | ||
106 | switch ((data[1] >> 5) & 3) { | |
107 | case 2: /* Mouse with wheel */ | |
108 | input_report_key(input, BTN_MIDDLE, data[1] & 0x04); | |
109 | rw = (data[6] & 0x01) ? -1 : | |
110 | (data[6] & 0x02) ? 1 : 0; | |
111 | input_report_rel(input, REL_WHEEL, rw); | |
112 | /* fall through */ | |
113 | ||
114 | case 3: /* Mouse without wheel */ | |
115 | input_report_key(input, BTN_LEFT, data[1] & 0x01); | |
116 | input_report_key(input, BTN_RIGHT, data[1] & 0x02); | |
117 | /* Compute distance between mouse and tablet */ | |
118 | rw = 44 - (data[6] >> 2); | |
119 | if (rw < 0) | |
120 | rw = 0; | |
121 | else if (rw > 31) | |
122 | rw = 31; | |
123 | input_report_abs(input, ABS_DISTANCE, rw); | |
124 | break; | |
125 | ||
126 | default: | |
127 | input_report_abs(input, ABS_PRESSURE, | |
128 | data[6] | (((__u16) (data[1] & 0x08)) << 5)); | |
129 | input_report_key(input, BTN_TOUCH, data[1] & 0x01); | |
130 | input_report_key(input, BTN_STYLUS, data[1] & 0x02); | |
131 | input_report_key(input, BTN_STYLUS2, (tool == BTN_TOOL_PEN) && data[1] & 0x04); | |
132 | break; | |
133 | } | |
134 | ||
135 | input_sync(input); | |
136 | } | |
137 | ||
138 | /* Report the state of the two buttons at the top of the tablet | |
139 | * as two extra fingerpad keys (buttons 4 & 5). */ | |
140 | rw = data[7] & 0x03; | |
141 | if (rw != wdata->butstate) { | |
142 | wdata->butstate = rw; | |
143 | input_report_key(input, BTN_0, rw & 0x02); | |
144 | input_report_key(input, BTN_1, rw & 0x01); | |
0e253fdb | 145 | input_report_key(input, BTN_TOOL_FINGER, 0xf0); |
ca2dcd40 BN |
146 | input_event(input, EV_MSC, MSC_SERIAL, 0xf0); |
147 | input_sync(input); | |
148 | } | |
149 | ||
150 | return 1; | |
151 | } | |
152 | ||
153 | static int wacom_probe(struct hid_device *hdev, | |
154 | const struct hid_device_id *id) | |
155 | { | |
156 | struct hid_input *hidinput; | |
157 | struct input_dev *input; | |
158 | struct wacom_data *wdata; | |
46a709b9 | 159 | char rep_data[2]; |
ca2dcd40 | 160 | int ret; |
46a709b9 | 161 | int limit; |
ca2dcd40 BN |
162 | |
163 | wdata = kzalloc(sizeof(*wdata), GFP_KERNEL); | |
164 | if (wdata == NULL) { | |
165 | dev_err(&hdev->dev, "can't alloc wacom descriptor\n"); | |
166 | return -ENOMEM; | |
167 | } | |
168 | ||
169 | hid_set_drvdata(hdev, wdata); | |
170 | ||
46a709b9 | 171 | /* Parse the HID report now */ |
ca2dcd40 BN |
172 | ret = hid_parse(hdev); |
173 | if (ret) { | |
174 | dev_err(&hdev->dev, "parse failed\n"); | |
175 | goto err_free; | |
176 | } | |
177 | ||
178 | ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); | |
179 | if (ret) { | |
180 | dev_err(&hdev->dev, "hw start failed\n"); | |
181 | goto err_free; | |
182 | } | |
183 | ||
342f31e8 JK |
184 | /* |
185 | * Note that if the raw queries fail, it's not a hard failure and it | |
186 | * is safe to continue | |
187 | */ | |
188 | ||
46a709b9 BN |
189 | /* Set Wacom mode2 */ |
190 | rep_data[0] = 0x03; rep_data[1] = 0x00; | |
191 | limit = 3; | |
192 | do { | |
193 | ret = hdev->hid_output_raw_report(hdev, rep_data, 2, | |
194 | HID_FEATURE_REPORT); | |
195 | } while (ret < 0 && limit-- > 0); | |
342f31e8 JK |
196 | if (ret < 0) |
197 | dev_warn(&hdev->dev, "failed to poke device #1, %d\n", ret); | |
46a709b9 BN |
198 | |
199 | /* 0x06 - high reporting speed, 0x05 - low speed */ | |
200 | rep_data[0] = 0x06; rep_data[1] = 0x00; | |
201 | limit = 3; | |
202 | do { | |
203 | ret = hdev->hid_output_raw_report(hdev, rep_data, 2, | |
204 | HID_FEATURE_REPORT); | |
205 | } while (ret < 0 && limit-- > 0); | |
342f31e8 JK |
206 | if (ret < 0) |
207 | dev_warn(&hdev->dev, "failed to poke device #2, %d\n", ret); | |
46a709b9 | 208 | |
ca2dcd40 BN |
209 | hidinput = list_entry(hdev->inputs.next, struct hid_input, list); |
210 | input = hidinput->input; | |
211 | ||
212 | /* Basics */ | |
213 | input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL); | |
214 | input->absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) | | |
215 | BIT(ABS_PRESSURE) | BIT(ABS_DISTANCE); | |
216 | input->relbit[0] |= BIT(REL_WHEEL); | |
217 | set_bit(BTN_TOOL_PEN, input->keybit); | |
218 | set_bit(BTN_TOUCH, input->keybit); | |
219 | set_bit(BTN_STYLUS, input->keybit); | |
220 | set_bit(BTN_STYLUS2, input->keybit); | |
221 | set_bit(BTN_LEFT, input->keybit); | |
222 | set_bit(BTN_RIGHT, input->keybit); | |
223 | set_bit(BTN_MIDDLE, input->keybit); | |
224 | ||
225 | /* Pad */ | |
226 | input->evbit[0] |= BIT(EV_MSC); | |
227 | input->mscbit[0] |= BIT(MSC_SERIAL); | |
d01799b2 PF |
228 | set_bit(BTN_0, input->keybit); |
229 | set_bit(BTN_1, input->keybit); | |
230 | set_bit(BTN_TOOL_FINGER, input->keybit); | |
ca2dcd40 BN |
231 | |
232 | /* Distance, rubber and mouse */ | |
233 | input->absbit[0] |= BIT(ABS_DISTANCE); | |
234 | set_bit(BTN_TOOL_RUBBER, input->keybit); | |
235 | set_bit(BTN_TOOL_MOUSE, input->keybit); | |
236 | ||
237 | input->absmax[ABS_PRESSURE] = 511; | |
238 | input->absmax[ABS_DISTANCE] = 32; | |
239 | ||
240 | input->absmax[ABS_X] = 16704; | |
241 | input->absmax[ABS_Y] = 12064; | |
242 | input->absfuzz[ABS_X] = 4; | |
243 | input->absfuzz[ABS_Y] = 4; | |
244 | ||
245 | return 0; | |
246 | err_free: | |
247 | kfree(wdata); | |
248 | return ret; | |
249 | } | |
250 | ||
251 | static void wacom_remove(struct hid_device *hdev) | |
252 | { | |
253 | hid_hw_stop(hdev); | |
254 | kfree(hid_get_drvdata(hdev)); | |
255 | } | |
256 | ||
257 | static const struct hid_device_id wacom_devices[] = { | |
258 | { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) }, | |
259 | ||
260 | { } | |
261 | }; | |
262 | MODULE_DEVICE_TABLE(hid, wacom_devices); | |
263 | ||
264 | static struct hid_driver wacom_driver = { | |
265 | .name = "wacom", | |
266 | .id_table = wacom_devices, | |
267 | .probe = wacom_probe, | |
268 | .remove = wacom_remove, | |
269 | .raw_event = wacom_raw_event, | |
270 | }; | |
271 | ||
a24f423b | 272 | static int __init wacom_init(void) |
ca2dcd40 BN |
273 | { |
274 | int ret; | |
275 | ||
276 | ret = hid_register_driver(&wacom_driver); | |
277 | if (ret) | |
278 | printk(KERN_ERR "can't register wacom driver\n"); | |
279 | printk(KERN_ERR "wacom driver registered\n"); | |
280 | return ret; | |
281 | } | |
282 | ||
a24f423b | 283 | static void __exit wacom_exit(void) |
ca2dcd40 BN |
284 | { |
285 | hid_unregister_driver(&wacom_driver); | |
286 | } | |
287 | ||
288 | module_init(wacom_init); | |
289 | module_exit(wacom_exit); | |
290 | MODULE_LICENSE("GPL"); | |
291 |