Commit | Line | Data |
---|---|---|
ad2f931d | 1 | # |
060b2f55 | 2 | # Hardware monitoring chip drivers configuration |
ad2f931d JD |
3 | # |
4 | ||
1d72acf9 | 5 | menuconfig HWMON |
ad2f931d | 6 | tristate "Hardware Monitoring support" |
e25df120 | 7 | depends on HAS_IOMEM |
ad2f931d JD |
8 | default y |
9 | help | |
10 | Hardware monitoring devices let you monitor the hardware health | |
11 | of a system. Most modern motherboards include such a device. It | |
12 | can include temperature sensors, voltage sensors, fan speed | |
13 | sensors and various additional features such as the ability to | |
1236441f MH |
14 | control the speed of the fans. If you want this support you |
15 | should say Y here and also to the specific driver(s) for your | |
16 | sensors chip(s) below. | |
17 | ||
0d0001dd JD |
18 | To find out which specific driver(s) you need, use the |
19 | sensors-detect script from the lm_sensors package. Read | |
20 | <file:Documentation/hwmon/userspace-tools> for details. | |
21 | ||
1236441f MH |
22 | This support can also be built as a module. If so, the module |
23 | will be called hwmon. | |
ad2f931d | 24 | |
1d72acf9 JE |
25 | if HWMON |
26 | ||
303760b4 JD |
27 | config HWMON_VID |
28 | tristate | |
29 | default n | |
30 | ||
61cba5c2 JD |
31 | config HWMON_DEBUG_CHIP |
32 | bool "Hardware Monitoring Chip debugging messages" | |
33 | default n | |
34 | help | |
35 | Say Y here if you want the I2C chip drivers to produce a bunch of | |
36 | debug messages to the system log. Select this if you are having | |
37 | a problem with I2C support and want to see more of what is going | |
38 | on. | |
39 | ||
40 | comment "Native drivers" | |
41 | ||
f2b84bbc | 42 | config SENSORS_ABITUGURU |
3faa1ffb | 43 | tristate "Abit uGuru (rev 1 & 2)" |
ec693fe5 | 44 | depends on X86 && DMI && EXPERIMENTAL |
f2b84bbc | 45 | help |
3faa1ffb HG |
46 | If you say yes here you get support for the sensor part of the first |
47 | and second revision of the Abit uGuru chip. The voltage and frequency | |
48 | control parts of the Abit uGuru are not supported. The Abit uGuru | |
49 | chip can be found on Abit uGuru featuring motherboards (most modern | |
50 | Abit motherboards from before end 2005). For more info and a list | |
51 | of which motherboards have which revision see | |
52 | Documentation/hwmon/abituguru | |
f2b84bbc HG |
53 | |
54 | This driver can also be built as a module. If so, the module | |
55 | will be called abituguru. | |
56 | ||
3faa1ffb HG |
57 | config SENSORS_ABITUGURU3 |
58 | tristate "Abit uGuru (rev 3)" | |
ec693fe5 | 59 | depends on X86 && DMI && EXPERIMENTAL |
3faa1ffb HG |
60 | help |
61 | If you say yes here you get support for the sensor part of the | |
62 | third revision of the Abit uGuru chip. Only reading the sensors | |
63 | and their settings is supported. The third revision of the Abit | |
64 | uGuru chip can be found on recent Abit motherboards (since end | |
65 | 2005). For more info and a list of which motherboards have which | |
66 | revision see Documentation/hwmon/abituguru3 | |
67 | ||
68 | This driver can also be built as a module. If so, the module | |
69 | will be called abituguru3. | |
70 | ||
6c633c30 SM |
71 | config SENSORS_AD7414 |
72 | tristate "Analog Devices AD7414" | |
73 | depends on I2C && EXPERIMENTAL | |
74 | help | |
75 | If you say yes here you get support for the Analog Devices | |
76 | AD7414 temperature monitoring chip. | |
77 | ||
78 | This driver can also be built as a module. If so, the module | |
79 | will be called ad7414. | |
80 | ||
2d8dd65f AZ |
81 | config SENSORS_AD7418 |
82 | tristate "Analog Devices AD7416, AD7417 and AD7418" | |
1d72acf9 | 83 | depends on I2C && EXPERIMENTAL |
2d8dd65f AZ |
84 | help |
85 | If you say yes here you get support for the Analog Devices | |
86 | AD7416, AD7417 and AD7418 temperature monitoring chips. | |
87 | ||
88 | This driver can also be built as a module. If so, the module | |
89 | will be called ad7418. | |
90 | ||
d42139a3 MP |
91 | config SENSORS_ADCXX |
92 | tristate "National Semiconductor ADCxxxSxxx" | |
93 | depends on SPI_MASTER && EXPERIMENTAL | |
94 | help | |
95 | If you say yes here you get support for the National Semiconductor | |
96 | ADC<bb><c>S<sss> chip family, where | |
97 | * bb is the resolution in number of bits (8, 10, 12) | |
98 | * c is the number of channels (1, 2, 4, 8) | |
99 | * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 | |
100 | kSPS and 101 for 1 MSPS) | |
101 | ||
102 | Examples : ADC081S101, ADC124S501, ... | |
103 | ||
104 | This driver can also be built as a module. If so, the module | |
105 | will be called adcxx. | |
106 | ||
ad2f931d JD |
107 | config SENSORS_ADM1021 |
108 | tristate "Analog Devices ADM1021 and compatibles" | |
1d72acf9 | 109 | depends on I2C |
ad2f931d JD |
110 | help |
111 | If you say yes here you get support for Analog Devices ADM1021 | |
112 | and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, | |
d7ce0335 | 113 | Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. |
ad2f931d JD |
114 | |
115 | This driver can also be built as a module. If so, the module | |
116 | will be called adm1021. | |
117 | ||
118 | config SENSORS_ADM1025 | |
119 | tristate "Analog Devices ADM1025 and compatibles" | |
1d72acf9 | 120 | depends on I2C |
303760b4 | 121 | select HWMON_VID |
ad2f931d JD |
122 | help |
123 | If you say yes here you get support for Analog Devices ADM1025 | |
124 | and Philips NE1619 sensor chips. | |
125 | ||
126 | This driver can also be built as a module. If so, the module | |
127 | will be called adm1025. | |
128 | ||
129 | config SENSORS_ADM1026 | |
130 | tristate "Analog Devices ADM1026 and compatibles" | |
0b22ce3b | 131 | depends on I2C |
303760b4 | 132 | select HWMON_VID |
ad2f931d JD |
133 | help |
134 | If you say yes here you get support for Analog Devices ADM1026 | |
135 | sensor chip. | |
136 | ||
137 | This driver can also be built as a module. If so, the module | |
138 | will be called adm1026. | |
139 | ||
cae2caae CL |
140 | config SENSORS_ADM1029 |
141 | tristate "Analog Devices ADM1029" | |
0b22ce3b | 142 | depends on I2C |
cae2caae CL |
143 | help |
144 | If you say yes here you get support for Analog Devices ADM1029 | |
145 | sensor chip. | |
146 | Very rare chip, please let us know you use it. | |
147 | ||
148 | This driver can also be built as a module. If so, the module | |
149 | will be called adm1029. | |
150 | ||
ad2f931d JD |
151 | config SENSORS_ADM1031 |
152 | tristate "Analog Devices ADM1031 and compatibles" | |
0b22ce3b | 153 | depends on I2C |
ad2f931d JD |
154 | help |
155 | If you say yes here you get support for Analog Devices ADM1031 | |
156 | and ADM1030 sensor chips. | |
157 | ||
158 | This driver can also be built as a module. If so, the module | |
159 | will be called adm1031. | |
160 | ||
161 | config SENSORS_ADM9240 | |
162 | tristate "Analog Devices ADM9240 and compatibles" | |
68f823de | 163 | depends on I2C |
303760b4 | 164 | select HWMON_VID |
ad2f931d JD |
165 | help |
166 | If you say yes here you get support for Analog Devices ADM9240, | |
167 | Dallas DS1780, National Semiconductor LM81 sensor chips. | |
168 | ||
169 | This driver can also be built as a module. If so, the module | |
170 | will be called adm9240. | |
171 | ||
d84ca5b3 WS |
172 | config SENSORS_ADT7411 |
173 | tristate "Analog Devices ADT7411" | |
174 | depends on I2C && EXPERIMENTAL | |
175 | help | |
176 | If you say yes here you get support for the Analog Devices | |
177 | ADT7411 voltage and temperature monitoring chip. | |
178 | ||
179 | This driver can also be built as a module. If so, the module | |
180 | will be called adt7411. | |
181 | ||
c0b4e3ab DW |
182 | config SENSORS_ADT7462 |
183 | tristate "Analog Devices ADT7462" | |
184 | depends on I2C && EXPERIMENTAL | |
185 | help | |
186 | If you say yes here you get support for the Analog Devices | |
187 | ADT7462 temperature monitoring chips. | |
188 | ||
189 | This driver can also be built as a module. If so, the module | |
190 | will be called adt7462. | |
191 | ||
6f9703d0 DW |
192 | config SENSORS_ADT7470 |
193 | tristate "Analog Devices ADT7470" | |
194 | depends on I2C && EXPERIMENTAL | |
195 | help | |
196 | If you say yes here you get support for the Analog Devices | |
197 | ADT7470 temperature monitoring chips. | |
198 | ||
199 | This driver can also be built as a module. If so, the module | |
200 | will be called adt7470. | |
201 | ||
1c301fc5 | 202 | config SENSORS_ADT7475 |
d8d2ee07 | 203 | tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" |
0b22ce3b | 204 | depends on I2C |
54fe4671 | 205 | select HWMON_VID |
1c301fc5 JC |
206 | help |
207 | If you say yes here you get support for the Analog Devices | |
d8d2ee07 JD |
208 | ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring |
209 | chips. | |
1c301fc5 JC |
210 | |
211 | This driver can also be build as a module. If so, the module | |
212 | will be called adt7475. | |
213 | ||
d58de038 GJ |
214 | config SENSORS_ASC7621 |
215 | tristate "Andigilog aSC7621" | |
9854f971 | 216 | depends on I2C |
d58de038 GJ |
217 | help |
218 | If you say yes here you get support for the aSC7621 | |
b00d8a7e JSR |
219 | family of SMBus sensors chip found on most Intel X38, X48, X58, |
220 | 945, 965 and 975 desktop boards. Currently supported chips: | |
d58de038 GJ |
221 | aSC7621 |
222 | aSC7621a | |
223 | ||
224 | This driver can also be built as a module. If so, the module | |
225 | will be called asc7621. | |
226 | ||
29fa06c1 | 227 | config SENSORS_K8TEMP |
4660cb35 | 228 | tristate "AMD Athlon64/FX or Opteron temperature sensor" |
1d72acf9 | 229 | depends on X86 && PCI && EXPERIMENTAL |
29fa06c1 RM |
230 | help |
231 | If you say yes here you get support for the temperature | |
4660cb35 RM |
232 | sensor(s) inside your CPU. Supported is whole AMD K8 |
233 | microarchitecture. Please note that you will need at least | |
234 | lm-sensors 2.10.1 for proper userspace support. | |
29fa06c1 RM |
235 | |
236 | This driver can also be built as a module. If so, the module | |
237 | will be called k8temp. | |
238 | ||
3c57e89b | 239 | config SENSORS_K10TEMP |
9e581311 | 240 | tristate "AMD Family 10h+ temperature sensor" |
3c57e89b CL |
241 | depends on X86 && PCI |
242 | help | |
243 | If you say yes here you get support for the temperature | |
244 | sensor(s) inside your CPU. Supported are later revisions of | |
aa4790a6 | 245 | the AMD Family 10h and all revisions of the AMD Family 11h, |
9e581311 | 246 | 12h (Llano), 14h (Brazos) and 15h (Bulldozer) microarchitectures. |
3c57e89b CL |
247 | |
248 | This driver can also be built as a module. If so, the module | |
249 | will be called k10temp. | |
250 | ||
512d1027 AH |
251 | config SENSORS_FAM15H_POWER |
252 | tristate "AMD Family 15h processor power" | |
253 | depends on X86 && PCI | |
254 | help | |
255 | If you say yes here you get support for processor power | |
256 | information of your AMD family 15h CPU. | |
257 | ||
258 | This driver can also be built as a module. If so, the module | |
259 | will be called fam15h_power. | |
260 | ||
ad2f931d JD |
261 | config SENSORS_ASB100 |
262 | tristate "Asus ASB100 Bach" | |
dabf375b | 263 | depends on X86 && I2C && EXPERIMENTAL |
303760b4 | 264 | select HWMON_VID |
ad2f931d JD |
265 | help |
266 | If you say yes here you get support for the ASB100 Bach sensor | |
267 | chip found on some Asus mainboards. | |
268 | ||
269 | This driver can also be built as a module. If so, the module | |
270 | will be called asb100. | |
271 | ||
272 | config SENSORS_ATXP1 | |
273 | tristate "Attansic ATXP1 VID controller" | |
1d72acf9 | 274 | depends on I2C && EXPERIMENTAL |
303760b4 | 275 | select HWMON_VID |
ad2f931d JD |
276 | help |
277 | If you say yes here you get support for the Attansic ATXP1 VID | |
278 | controller. | |
279 | ||
280 | If your board have such a chip, you are able to control your CPU | |
281 | core and other voltages. | |
282 | ||
283 | This driver can also be built as a module. If so, the module | |
284 | will be called atxp1. | |
285 | ||
60994698 RS |
286 | config SENSORS_DS620 |
287 | tristate "Dallas Semiconductor DS620" | |
288 | depends on I2C | |
289 | help | |
290 | If you say yes here you get support for Dallas Semiconductor | |
291 | DS620 sensor chip. | |
292 | ||
293 | This driver can also be built as a module. If so, the module | |
294 | will be called ds620. | |
295 | ||
ad2f931d JD |
296 | config SENSORS_DS1621 |
297 | tristate "Dallas Semiconductor DS1621 and DS1625" | |
1d72acf9 | 298 | depends on I2C |
ad2f931d JD |
299 | help |
300 | If you say yes here you get support for Dallas Semiconductor | |
301 | DS1621 and DS1625 sensor chips. | |
302 | ||
303 | This driver can also be built as a module. If so, the module | |
304 | will be called ds1621. | |
305 | ||
9d97e5c8 DK |
306 | config SENSORS_EXYNOS4_TMU |
307 | tristate "Temperature sensor on Samsung EXYNOS4" | |
308 | depends on EXYNOS4_DEV_TMU | |
309 | help | |
310 | If you say yes here you get support for TMU (Thermal Managment | |
311 | Unit) on SAMSUNG EXYNOS4 series of SoC. | |
312 | ||
313 | This driver can also be built as a module. If so, the module | |
314 | will be called exynos4-tmu. | |
315 | ||
298c7524 DW |
316 | config SENSORS_I5K_AMB |
317 | tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" | |
318 | depends on PCI && EXPERIMENTAL | |
319 | help | |
320 | If you say yes here you get support for FB-DIMM AMB temperature | |
321 | monitoring chips on systems with the Intel 5000 series chipset. | |
322 | ||
323 | This driver can also be built as a module. If so, the module | |
324 | will be called i5k_amb. | |
325 | ||
e53004e2 | 326 | config SENSORS_F71805F |
9cab0217 | 327 | tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" |
e53004e2 JD |
328 | help |
329 | If you say yes here you get support for hardware monitoring | |
9cab0217 JD |
330 | features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG |
331 | Super-I/O chips. | |
e53004e2 JD |
332 | |
333 | This driver can also be built as a module. If so, the module | |
334 | will be called f71805f. | |
335 | ||
45fb3669 | 336 | config SENSORS_F71882FG |
5d7f77bf | 337 | tristate "Fintek F71882FG and compatibles" |
45fb3669 | 338 | help |
f2e41e91 | 339 | If you say yes here you get support for hardware monitoring |
5d7f77bf JD |
340 | features of many Fintek Super-I/O (LPC) chips. The currently |
341 | supported chips are: | |
629c58ba | 342 | F71808E/A |
5d7f77bf JD |
343 | F71858FG |
344 | F71862FG | |
345 | F71863FG | |
5da556e3 | 346 | F71869F/E/A |
5d7f77bf JD |
347 | F71882FG |
348 | F71883FG | |
a66c1088 | 349 | F71889FG/ED/A |
5d7f77bf JD |
350 | F8000 |
351 | F81801U | |
383586b1 | 352 | F81865F |
45fb3669 HG |
353 | |
354 | This driver can also be built as a module. If so, the module | |
355 | will be called f71882fg. | |
356 | ||
84f1e442 | 357 | config SENSORS_F75375S |
0b22ce3b JD |
358 | tristate "Fintek F75375S/SP and F75373" |
359 | depends on I2C | |
84f1e442 RV |
360 | help |
361 | If you say yes here you get support for hardware monitoring | |
362 | features of the Fintek F75375S/SP and F75373 | |
363 | ||
364 | This driver can also be built as a module. If so, the module | |
365 | will be called f75375s. | |
366 | ||
569ff102 | 367 | config SENSORS_FSCHMD |
c69ab2b7 | 368 | tristate "Fujitsu Siemens Computers sensor chips" |
0589c2de | 369 | depends on X86 && I2C |
569ff102 | 370 | help |
c69ab2b7 HG |
371 | If you say yes here you get support for the following Fujitsu |
372 | Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, | |
de15f093 HG |
373 | Heimdall, Heracles, Hades and Syleus including support for the |
374 | integrated watchdog. | |
569ff102 | 375 | |
0589c2de HG |
376 | This is a merged driver for FSC sensor chips replacing the fscpos, |
377 | fscscy and fscher drivers and adding support for several other FSC | |
378 | sensor chips. | |
569ff102 HG |
379 | |
380 | This driver can also be built as a module. If so, the module | |
381 | will be called fschmd. | |
382 | ||
3bcfa9e4 HVR |
383 | config SENSORS_G760A |
384 | tristate "GMT G760A" | |
385 | depends on I2C | |
386 | help | |
387 | If you say yes here you get support for Global Mixed-mode | |
388 | Technology Inc G760A fan speed PWM controller chips. | |
389 | ||
390 | This driver can also be built as a module. If so, the module | |
391 | will be called g760a. | |
392 | ||
ad2f931d JD |
393 | config SENSORS_GL518SM |
394 | tristate "Genesys Logic GL518SM" | |
1d72acf9 | 395 | depends on I2C |
ad2f931d JD |
396 | help |
397 | If you say yes here you get support for Genesys Logic GL518SM | |
398 | sensor chips. | |
399 | ||
400 | This driver can also be built as a module. If so, the module | |
401 | will be called gl518sm. | |
402 | ||
403 | config SENSORS_GL520SM | |
404 | tristate "Genesys Logic GL520SM" | |
1d72acf9 | 405 | depends on I2C |
303760b4 | 406 | select HWMON_VID |
ad2f931d JD |
407 | help |
408 | If you say yes here you get support for Genesys Logic GL520SM | |
409 | sensor chips. | |
410 | ||
411 | This driver can also be built as a module. If so, the module | |
412 | will be called gl520sm. | |
413 | ||
d6fe1360 SG |
414 | config SENSORS_GPIO_FAN |
415 | tristate "GPIO fan" | |
416 | depends on GENERIC_GPIO | |
417 | help | |
418 | If you say yes here you get support for fans connected to GPIO lines. | |
419 | ||
420 | This driver can also be built as a module. If so, the module | |
421 | will be called gpio-fan. | |
422 | ||
bebe4678 | 423 | config SENSORS_CORETEMP |
708a62bc | 424 | tristate "Intel Core/Core2/Atom temperature sensor" |
1fe63ab4 | 425 | depends on X86 && PCI && EXPERIMENTAL |
bebe4678 RM |
426 | help |
427 | If you say yes here you get support for the temperature | |
708a62bc | 428 | sensor inside your CPU. Most of the family 6 CPUs |
f3cffe4d | 429 | are supported. Check Documentation/hwmon/coretemp for details. |
bebe4678 | 430 | |
8808a793 DW |
431 | config SENSORS_IBMAEM |
432 | tristate "IBM Active Energy Manager temperature/power sensors and control" | |
433 | select IPMI_SI | |
434 | depends on IPMI_HANDLER | |
435 | help | |
436 | If you say yes here you get support for the temperature and | |
437 | power sensors and capping hardware in various IBM System X | |
438 | servers that support Active Energy Manager. This includes | |
439 | the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, | |
8070408b | 440 | and certain HC10/HS2x/LS2x/QS2x blades. |
8808a793 DW |
441 | |
442 | This driver can also be built as a module. If so, the module | |
443 | will be called ibmaem. | |
444 | ||
57c7c3a0 DW |
445 | config SENSORS_IBMPEX |
446 | tristate "IBM PowerExecutive temperature/power sensors" | |
447 | select IPMI_SI | |
448 | depends on IPMI_HANDLER | |
449 | help | |
450 | If you say yes here you get support for the temperature and | |
451 | power sensors in various IBM System X servers that support | |
3d960a99 DW |
452 | PowerExecutive. So far this includes the x3350, x3550, x3650, |
453 | x3655, and x3755; the x3800, x3850, and x3950 models that have | |
454 | PCI Express; and some of the HS2x, LS2x, and QS2x blades. | |
57c7c3a0 DW |
455 | |
456 | This driver can also be built as a module. If so, the module | |
457 | will be called ibmpex. | |
458 | ||
ad2f931d JD |
459 | config SENSORS_IT87 |
460 | tristate "ITE IT87xx and compatibles" | |
303760b4 | 461 | select HWMON_VID |
ad2f931d | 462 | help |
87673dd7 | 463 | If you say yes here you get support for ITE IT8705F, IT8712F, |
44c1bcd4 JD |
464 | IT8716F, IT8718F, IT8720F, IT8721F, IT8726F and IT8758E sensor |
465 | chips, and the SiS960 clone. | |
ad2f931d JD |
466 | |
467 | This driver can also be built as a module. If so, the module | |
468 | will be called it87. | |
469 | ||
7f983ba9 LPC |
470 | config SENSORS_JZ4740 |
471 | tristate "Ingenic JZ4740 SoC ADC driver" | |
472 | depends on MACH_JZ4740 && MFD_JZ4740_ADC | |
473 | help | |
474 | If you say yes here you get support for reading adc values from the ADCIN | |
475 | pin on Ingenic JZ4740 SoC based boards. | |
476 | ||
477 | This driver can also be build as a module. If so, the module will be | |
478 | called jz4740-hwmon. | |
479 | ||
4453d736 | 480 | config SENSORS_JC42 |
d5622f5b | 481 | tristate "JEDEC JC42.4 compliant memory module temperature sensors" |
4bd2691d | 482 | depends on I2C |
4453d736 | 483 | help |
d5622f5b CL |
484 | If you say yes here, you get support for JEDEC JC42.4 compliant |
485 | temperature sensors, which are used on many DDR3 memory modules for | |
486 | mobile devices and servers. Support will include, but not be limited | |
487 | to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243, | |
488 | MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3. | |
4453d736 GR |
489 | |
490 | This driver can also be built as a module. If so, the module | |
491 | will be called jc42. | |
492 | ||
502b5a01 GR |
493 | config SENSORS_LINEAGE |
494 | tristate "Lineage Compact Power Line Power Entry Module" | |
495 | depends on I2C && EXPERIMENTAL | |
496 | help | |
497 | If you say yes here you get support for the Lineage Compact Power Line | |
498 | series of DC/DC and AC/DC converters such as CP1800, CP2000AC, | |
499 | CP2000DC, CP2725, and others. | |
500 | ||
501 | This driver can also be built as a module. If so, the module | |
502 | will be called lineage-pem. | |
503 | ||
ad2f931d | 504 | config SENSORS_LM63 |
10f2ed31 | 505 | tristate "National Semiconductor LM63 and LM64" |
1d72acf9 | 506 | depends on I2C |
ad2f931d | 507 | help |
10f2ed31 MG |
508 | If you say yes here you get support for the National |
509 | Semiconductor LM63 and LM64 remote diode digital temperature | |
510 | sensors with integrated fan control. Such chips are found | |
511 | on the Tyan S4882 (Thunder K8QS Pro) motherboard, among | |
512 | others. | |
ad2f931d JD |
513 | |
514 | This driver can also be built as a module. If so, the module | |
515 | will be called lm63. | |
516 | ||
e1a8e913 | 517 | config SENSORS_LM70 |
c8ac32e4 | 518 | tristate "National Semiconductor LM70 / Texas Instruments TMP121" |
0b22ce3b | 519 | depends on SPI_MASTER |
e1a8e913 KB |
520 | help |
521 | If you say yes here you get support for the National Semiconductor | |
c8ac32e4 ML |
522 | LM70 and Texas Instruments TMP121/TMP123 digital temperature |
523 | sensor chips. | |
e1a8e913 KB |
524 | |
525 | This driver can also be built as a module. If so, the module | |
526 | will be called lm70. | |
527 | ||
4e233cbe AD |
528 | config SENSORS_LM73 |
529 | tristate "National Semiconductor LM73" | |
530 | depends on I2C | |
531 | help | |
532 | If you say yes here you get support for National Semiconductor LM73 | |
533 | sensor chips. | |
534 | This driver can also be built as a module. If so, the module | |
535 | will be called lm73. | |
536 | ||
ad2f931d JD |
537 | config SENSORS_LM75 |
538 | tristate "National Semiconductor LM75 and compatibles" | |
1d72acf9 | 539 | depends on I2C |
ad2f931d | 540 | help |
01a52397 DB |
541 | If you say yes here you get support for one common type of |
542 | temperature sensor chip, with models including: | |
543 | ||
544 | - Dallas Semiconductor DS75 and DS1775 | |
545 | - Maxim MAX6625 and MAX6626 | |
546 | - Microchip MCP980x | |
05e82fe4 | 547 | - National Semiconductor LM75, LM75A |
01a52397 DB |
548 | - NXP's LM75A |
549 | - ST Microelectronics STDS75 | |
550 | - TelCom (now Microchip) TCN75 | |
6d034059 SD |
551 | - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175, |
552 | TMP275 | |
01a52397 | 553 | |
9ebd3d82 DB |
554 | This driver supports driver model based binding through board |
555 | specific I2C device tables. | |
556 | ||
557 | It also supports the "legacy" style of driver binding. To use | |
558 | that with some chips which don't replicate LM75 quirks exactly, | |
559 | you may need the "force" module parameter. | |
ad2f931d JD |
560 | |
561 | This driver can also be built as a module. If so, the module | |
562 | will be called lm75. | |
563 | ||
564 | config SENSORS_LM77 | |
565 | tristate "National Semiconductor LM77" | |
1d72acf9 | 566 | depends on I2C |
ad2f931d JD |
567 | help |
568 | If you say yes here you get support for National Semiconductor LM77 | |
569 | sensor chips. | |
570 | ||
571 | This driver can also be built as a module. If so, the module | |
572 | will be called lm77. | |
573 | ||
574 | config SENSORS_LM78 | |
575 | tristate "National Semiconductor LM78 and compatibles" | |
1d72acf9 | 576 | depends on I2C |
19f673ed | 577 | select HWMON_VID |
ad2f931d JD |
578 | help |
579 | If you say yes here you get support for National Semiconductor LM78, | |
580 | LM78-J and LM79. | |
581 | ||
582 | This driver can also be built as a module. If so, the module | |
583 | will be called lm78. | |
584 | ||
585 | config SENSORS_LM80 | |
586 | tristate "National Semiconductor LM80" | |
0b22ce3b | 587 | depends on I2C |
ad2f931d JD |
588 | help |
589 | If you say yes here you get support for National Semiconductor | |
590 | LM80 sensor chips. | |
591 | ||
592 | This driver can also be built as a module. If so, the module | |
593 | will be called lm80. | |
594 | ||
595 | config SENSORS_LM83 | |
43cb7ebe | 596 | tristate "National Semiconductor LM83 and compatibles" |
1d72acf9 | 597 | depends on I2C |
ad2f931d JD |
598 | help |
599 | If you say yes here you get support for National Semiconductor | |
43cb7ebe | 600 | LM82 and LM83 sensor chips. |
ad2f931d JD |
601 | |
602 | This driver can also be built as a module. If so, the module | |
603 | will be called lm83. | |
604 | ||
605 | config SENSORS_LM85 | |
606 | tristate "National Semiconductor LM85 and compatibles" | |
0b22ce3b | 607 | depends on I2C |
303760b4 | 608 | select HWMON_VID |
ad2f931d JD |
609 | help |
610 | If you say yes here you get support for National Semiconductor LM85 | |
c36364db | 611 | sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, |
f065a93e | 612 | EMC6D101, EMC6D102, and EMC6D103. |
ad2f931d JD |
613 | |
614 | This driver can also be built as a module. If so, the module | |
615 | will be called lm85. | |
616 | ||
617 | config SENSORS_LM87 | |
c7fa3737 | 618 | tristate "National Semiconductor LM87 and compatibles" |
1d72acf9 | 619 | depends on I2C |
303760b4 | 620 | select HWMON_VID |
ad2f931d JD |
621 | help |
622 | If you say yes here you get support for National Semiconductor LM87 | |
c7fa3737 | 623 | and Analog Devices ADM1024 sensor chips. |
ad2f931d JD |
624 | |
625 | This driver can also be built as a module. If so, the module | |
626 | will be called lm87. | |
627 | ||
628 | config SENSORS_LM90 | |
629 | tristate "National Semiconductor LM90 and compatibles" | |
1d72acf9 | 630 | depends on I2C |
ad2f931d JD |
631 | help |
632 | If you say yes here you get support for National Semiconductor LM90, | |
5a4e5e6a GR |
633 | LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A, |
634 | Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, | |
635 | MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008, | |
2ef01793 | 636 | Winbond/Nuvoton W83L771W/G/AWG/ASG and Philips SA56004 sensor chips. |
ad2f931d JD |
637 | |
638 | This driver can also be built as a module. If so, the module | |
639 | will be called lm90. | |
640 | ||
641 | config SENSORS_LM92 | |
642 | tristate "National Semiconductor LM92 and compatibles" | |
1d72acf9 | 643 | depends on I2C |
ad2f931d JD |
644 | help |
645 | If you say yes here you get support for National Semiconductor LM92 | |
646 | and Maxim MAX6635 sensor chips. | |
647 | ||
648 | This driver can also be built as a module. If so, the module | |
649 | will be called lm92. | |
650 | ||
e46957ed HJK |
651 | config SENSORS_LM93 |
652 | tristate "National Semiconductor LM93 and compatibles" | |
dabf375b | 653 | depends on I2C |
e46957ed HJK |
654 | select HWMON_VID |
655 | help | |
c7bf71c5 GR |
656 | If you say yes here you get support for National Semiconductor LM93, |
657 | LM94, and compatible sensor chips. | |
e46957ed HJK |
658 | |
659 | This driver can also be built as a module. If so, the module | |
660 | will be called lm93. | |
661 | ||
de779015 | 662 | config SENSORS_LTC4151 |
663 | tristate "Linear Technology LTC4151" | |
664 | depends on I2C | |
665 | default n | |
666 | help | |
667 | If you say yes here you get support for Linear Technology LTC4151 | |
668 | High Voltage I2C Current and Voltage Monitor interface. | |
669 | ||
670 | This driver can also be built as a module. If so, the module will | |
671 | be called ltc4151. | |
672 | ||
72f5de92 IS |
673 | config SENSORS_LTC4215 |
674 | tristate "Linear Technology LTC4215" | |
675 | depends on I2C && EXPERIMENTAL | |
676 | default n | |
677 | help | |
678 | If you say yes here you get support for Linear Technology LTC4215 | |
679 | Hot Swap Controller I2C interface. | |
680 | ||
681 | This driver can also be built as a module. If so, the module will | |
682 | be called ltc4215. | |
683 | ||
6e34b187 IS |
684 | config SENSORS_LTC4245 |
685 | tristate "Linear Technology LTC4245" | |
686 | depends on I2C && EXPERIMENTAL | |
687 | default n | |
688 | help | |
689 | If you say yes here you get support for Linear Technology LTC4245 | |
690 | Multiple Supply Hot Swap Controller I2C interface. | |
691 | ||
692 | This driver can also be built as a module. If so, the module will | |
693 | be called ltc4245. | |
694 | ||
e5f5c99a GR |
695 | config SENSORS_LTC4261 |
696 | tristate "Linear Technology LTC4261" | |
697 | depends on I2C && EXPERIMENTAL | |
698 | default n | |
699 | help | |
700 | If you say yes here you get support for Linear Technology LTC4261 | |
701 | Negative Voltage Hot Swap Controller I2C interface. | |
702 | ||
703 | This driver can also be built as a module. If so, the module will | |
704 | be called ltc4261. | |
705 | ||
06160327 | 706 | config SENSORS_LM95241 |
8c1d0419 | 707 | tristate "National Semiconductor LM95241 and compatibles" |
06160327 DR |
708 | depends on I2C |
709 | help | |
8c1d0419 GR |
710 | If you say yes here you get support for LM95231 and LM95241 sensor |
711 | chips. | |
06160327 DR |
712 | |
713 | This driver can also be built as a module. If so, the module | |
714 | will be called lm95241. | |
715 | ||
fffd80cc AS |
716 | config SENSORS_LM95245 |
717 | tristate "National Semiconductor LM95245 sensor chip" | |
718 | depends on I2C && EXPERIMENTAL | |
719 | help | |
720 | If you say yes here you get support for LM95245 sensor chip. | |
721 | ||
722 | This driver can also be built as a module. If so, the module | |
723 | will be called lm95245. | |
724 | ||
55b951e7 EM |
725 | config SENSORS_MAX1111 |
726 | tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip" | |
727 | depends on SPI_MASTER | |
728 | help | |
729 | Say y here to support Maxim's MAX1111 ADC chips. | |
730 | ||
731 | This driver can also be built as a module. If so, the module | |
732 | will be called max1111. | |
733 | ||
f5bae264 GR |
734 | config SENSORS_MAX16065 |
735 | tristate "Maxim MAX16065 System Manager and compatibles" | |
736 | depends on I2C | |
737 | help | |
738 | If you say yes here you get support for hardware monitoring | |
739 | capabilities of the following Maxim System Manager chips. | |
740 | MAX16065 | |
741 | MAX16066 | |
742 | MAX16067 | |
743 | MAX16068 | |
744 | MAX16070 | |
745 | MAX16071 | |
746 | ||
747 | This driver can also be built as a module. If so, the module | |
748 | will be called max16065. | |
749 | ||
ad2f931d JD |
750 | config SENSORS_MAX1619 |
751 | tristate "Maxim MAX1619 sensor chip" | |
1d72acf9 | 752 | depends on I2C |
ad2f931d JD |
753 | help |
754 | If you say yes here you get support for MAX1619 sensor chip. | |
755 | ||
756 | This driver can also be built as a module. If so, the module | |
757 | will be called max1619. | |
758 | ||
731b4cac DG |
759 | config SENSORS_MAX1668 |
760 | tristate "Maxim MAX1668 and compatibles" | |
761 | depends on I2C && EXPERIMENTAL | |
762 | help | |
763 | If you say yes here you get support for MAX1668, MAX1989 and | |
764 | MAX1805 chips. | |
765 | ||
766 | This driver can also be built as a module. If so, the module | |
767 | will be called max1668. | |
768 | ||
a5b79d62 | 769 | config SENSORS_MAX6639 |
770 | tristate "Maxim MAX6639 sensor chip" | |
771 | depends on I2C && EXPERIMENTAL | |
772 | help | |
773 | If you say yes here you get support for the MAX6639 | |
774 | sensor chips. | |
775 | ||
776 | This driver can also be built as a module. If so, the module | |
777 | will be called max6639. | |
778 | ||
83bffbce PD |
779 | config SENSORS_MAX6642 |
780 | tristate "Maxim MAX6642 sensor chip" | |
781 | depends on I2C && EXPERIMENTAL | |
782 | help | |
783 | If you say yes here you get support for MAX6642 sensor chip. | |
784 | MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor | |
785 | with Overtemperature Alarm from Maxim. | |
786 | ||
787 | This driver can also be built as a module. If so, the module | |
788 | will be called max6642. | |
789 | ||
d20620de HJK |
790 | config SENSORS_MAX6650 |
791 | tristate "Maxim MAX6650 sensor chip" | |
1d72acf9 | 792 | depends on I2C && EXPERIMENTAL |
d20620de HJK |
793 | help |
794 | If you say yes here you get support for the MAX6650 / MAX6651 | |
795 | sensor chips. | |
796 | ||
797 | This driver can also be built as a module. If so, the module | |
798 | will be called max6650. | |
799 | ||
f22aaaa7 DK |
800 | config SENSORS_NTC_THERMISTOR |
801 | tristate "NTC thermistor support" | |
802 | depends on EXPERIMENTAL | |
803 | help | |
804 | This driver supports NTC thermistors sensor reading and its | |
805 | interpretation. The driver can also monitor the temperature and | |
806 | send notifications about the temperature. | |
807 | ||
808 | Currently, this driver supports | |
809 | NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333. | |
810 | ||
811 | This driver can also be built as a module. If so, the module | |
812 | will be called ntc-thermistor. | |
813 | ||
ad2f931d JD |
814 | config SENSORS_PC87360 |
815 | tristate "National Semiconductor PC87360 family" | |
303760b4 | 816 | select HWMON_VID |
ad2f931d JD |
817 | help |
818 | If you say yes here you get access to the hardware monitoring | |
819 | functions of the National Semiconductor PC8736x Super-I/O chips. | |
820 | The PC87360, PC87363 and PC87364 only have fan monitoring and | |
821 | control. The PC87365 and PC87366 additionally have voltage and | |
822 | temperature monitoring. | |
823 | ||
824 | This driver can also be built as a module. If so, the module | |
825 | will be called pc87360. | |
826 | ||
ba224e2c JD |
827 | config SENSORS_PC87427 |
828 | tristate "National Semiconductor PC87427" | |
ba224e2c JD |
829 | help |
830 | If you say yes here you get access to the hardware monitoring | |
831 | functions of the National Semiconductor PC87427 Super-I/O chip. | |
832 | The chip has two distinct logical devices, one for fan speed | |
833 | monitoring and control, and one for voltage and temperature | |
008e5f33 JD |
834 | monitoring. Fan speed monitoring and control are supported, as |
835 | well as temperature monitoring. Voltages aren't supported yet. | |
ba224e2c JD |
836 | |
837 | This driver can also be built as a module. If so, the module | |
838 | will be called pc87427. | |
839 | ||
fb4504fe JD |
840 | config SENSORS_PCF8591 |
841 | tristate "Philips PCF8591 ADC/DAC" | |
842 | depends on I2C | |
843 | default n | |
844 | help | |
845 | If you say yes here you get support for Philips PCF8591 4-channel | |
846 | ADC, 1-channel DAC chips. | |
847 | ||
848 | This driver can also be built as a module. If so, the module | |
849 | will be called pcf8591. | |
850 | ||
851 | These devices are hard to detect and rarely found on mainstream | |
852 | hardware. If unsure, say N. | |
853 | ||
9d2ecfb7 | 854 | source drivers/hwmon/pmbus/Kconfig |
442aba78 | 855 | |
251eb40f JC |
856 | config SENSORS_SHT15 |
857 | tristate "Sensiron humidity and temperature sensors. SHT15 and compat." | |
858 | depends on GENERIC_GPIO | |
859 | help | |
860 | If you say yes here you get support for the Sensiron SHT10, SHT11, | |
861 | SHT15, SHT71, SHT75 humidity and temperature sensors. | |
862 | ||
863 | This driver can also be built as a module. If so, the module | |
864 | will be called sht15. | |
865 | ||
430400b8 UF |
866 | config SENSORS_SHT21 |
867 | tristate "Sensiron humidity and temperature sensors. SHT21 and compat." | |
868 | depends on I2C | |
869 | help | |
870 | If you say yes here you get support for the Sensiron SHT21, SHT25 | |
871 | humidity and temperature sensors. | |
872 | ||
873 | This driver can also be built as a module. If so, the module | |
874 | will be called sht21. | |
875 | ||
bff78650 | 876 | config SENSORS_S3C |
62991f7a MC |
877 | tristate "Samsung built-in ADC" |
878 | depends on S3C_ADC | |
bff78650 BD |
879 | help |
880 | If you say yes here you get support for the on-board ADCs of | |
62991f7a | 881 | the Samsung S3C24XX, S3C64XX and other series of SoC |
bff78650 BD |
882 | |
883 | This driver can also be built as a module. If so, the module | |
62991f7a | 884 | will be called s3c-hwmon. |
bff78650 BD |
885 | |
886 | config SENSORS_S3C_RAW | |
887 | bool "Include raw channel attributes in sysfs" | |
888 | depends on SENSORS_S3C | |
889 | help | |
890 | Say Y here if you want to include raw copies of all the ADC | |
891 | channels in sysfs. | |
892 | ||
ad2f931d JD |
893 | config SENSORS_SIS5595 |
894 | tristate "Silicon Integrated Systems Corp. SiS5595" | |
17e7dc43 | 895 | depends on PCI |
ad2f931d JD |
896 | help |
897 | If you say yes here you get support for the integrated sensors in | |
898 | SiS5595 South Bridges. | |
899 | ||
900 | This driver can also be built as a module. If so, the module | |
901 | will be called sis5595. | |
902 | ||
920fa1ff GR |
903 | config SENSORS_SMM665 |
904 | tristate "Summit Microelectronics SMM665" | |
905 | depends on I2C && EXPERIMENTAL | |
906 | default n | |
907 | help | |
908 | If you say yes here you get support for the hardware monitoring | |
909 | features of the Summit Microelectronics SMM665/SMM665B Six-Channel | |
910 | Active DC Output Controller / Monitor. | |
911 | ||
912 | Other supported chips are SMM465, SMM665C, SMM764, and SMM766. | |
913 | Support for those chips is untested. | |
914 | ||
915 | This driver can also be built as a module. If so, the module will | |
916 | be called smm665. | |
917 | ||
9431996f | 918 | config SENSORS_DME1737 |
e95c237d | 919 | tristate "SMSC DME1737, SCH311x and compatibles" |
9431996f JH |
920 | depends on I2C && EXPERIMENTAL |
921 | select HWMON_VID | |
922 | help | |
923 | If you say yes here you get support for the hardware monitoring | |
549edb83 JH |
924 | and fan control features of the SMSC DME1737, SCH311x, SCH5027, and |
925 | Asus A8000 Super-I/O chips. | |
9431996f JH |
926 | |
927 | This driver can also be built as a module. If so, the module | |
928 | will be called dme1737. | |
929 | ||
dac6831e | 930 | config SENSORS_EMC1403 |
7a1b76f2 | 931 | tristate "SMSC EMC1403/23 thermal sensor" |
dac6831e KT |
932 | depends on I2C |
933 | help | |
7a1b76f2 | 934 | If you say yes here you get support for the SMSC EMC1403/23 |
dac6831e KT |
935 | temperature monitoring chip. |
936 | ||
937 | Threshold values can be configured using sysfs. | |
938 | Data from the different diodes are accessible via sysfs. | |
939 | ||
9df7305b SG |
940 | config SENSORS_EMC2103 |
941 | tristate "SMSC EMC2103" | |
942 | depends on I2C | |
943 | help | |
944 | If you say yes here you get support for the temperature | |
945 | and fan sensors of the SMSC EMC2103 chips. | |
946 | ||
947 | This driver can also be built as a module. If so, the module | |
948 | will be called emc2103. | |
949 | ||
b0b349a8 JD |
950 | config SENSORS_EMC6W201 |
951 | tristate "SMSC EMC6W201" | |
952 | depends on I2C | |
953 | help | |
954 | If you say yes here you get support for the SMSC EMC6W201 | |
955 | hardware monitoring chip. | |
956 | ||
957 | This driver can also be built as a module. If so, the module | |
958 | will be called emc6w201. | |
959 | ||
ad2f931d JD |
960 | config SENSORS_SMSC47M1 |
961 | tristate "SMSC LPC47M10x and compatibles" | |
ad2f931d JD |
962 | help |
963 | If you say yes here you get support for the integrated fan | |
964 | monitoring and control capabilities of the SMSC LPC47B27x, | |
6091780e | 965 | LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, |
8eccbb6f | 966 | LPC47M192, LPC47M292 and LPC47M997 chips. |
59ac8367 | 967 | |
8eccbb6f JD |
968 | The temperature and voltage sensor features of the LPC47M15x, |
969 | LPC47M192, LPC47M292 and LPC47M997 are supported by another | |
970 | driver, select also "SMSC LPC47M192 and compatibles" below for | |
971 | those. | |
ad2f931d JD |
972 | |
973 | This driver can also be built as a module. If so, the module | |
974 | will be called smsc47m1. | |
975 | ||
59ac8367 HR |
976 | config SENSORS_SMSC47M192 |
977 | tristate "SMSC LPC47M192 and compatibles" | |
0b22ce3b | 978 | depends on I2C |
59ac8367 HR |
979 | select HWMON_VID |
980 | help | |
981 | If you say yes here you get support for the temperature and | |
00cb4739 JD |
982 | voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 |
983 | and LPC47M997 chips. | |
59ac8367 HR |
984 | |
985 | The fan monitoring and control capabilities of these chips | |
986 | are supported by another driver, select | |
987 | "SMSC LPC47M10x and compatibles" above. You need both drivers | |
988 | if you want fan control and voltage/temperature sensor support. | |
989 | ||
990 | This driver can also be built as a module. If so, the module | |
991 | will be called smsc47m192. | |
992 | ||
ad2f931d JD |
993 | config SENSORS_SMSC47B397 |
994 | tristate "SMSC LPC47B397-NC" | |
1d72acf9 | 995 | depends on EXPERIMENTAL |
ad2f931d JD |
996 | help |
997 | If you say yes here you get support for the SMSC LPC47B397-NC | |
998 | sensor chip. | |
999 | ||
1000 | This driver can also be built as a module. If so, the module | |
1001 | will be called smsc47b397. | |
1002 | ||
28ff2f7a HG |
1003 | config SENSORS_SCH56XX_COMMON |
1004 | tristate | |
1005 | default n | |
1006 | ||
a98d506c HG |
1007 | config SENSORS_SCH5627 |
1008 | tristate "SMSC SCH5627" | |
28ff2f7a | 1009 | select SENSORS_SCH56XX_COMMON |
a98d506c HG |
1010 | help |
1011 | If you say yes here you get support for the hardware monitoring | |
1012 | features of the SMSC SCH5627 Super-I/O chip. | |
1013 | ||
1014 | This driver can also be built as a module. If so, the module | |
1015 | will be called sch5627. | |
1016 | ||
0772a640 HG |
1017 | config SENSORS_SCH5636 |
1018 | tristate "SMSC SCH5636" | |
1019 | select SENSORS_SCH56XX_COMMON | |
1020 | help | |
1021 | SMSC SCH5636 Super I/O chips include an embedded microcontroller for | |
1022 | hardware monitoring solutions, allowing motherboard manufacturers to | |
1023 | create their own custom hwmon solution based upon the SCH5636. | |
1024 | ||
1025 | Currently this driver only supports the Fujitsu Theseus SCH5636 based | |
1026 | hwmon solution. Say yes here if you want support for the Fujitsu | |
1027 | Theseus' hardware monitoring features. | |
1028 | ||
1029 | This driver can also be built as a module. If so, the module | |
1030 | will be called sch5636. | |
1031 | ||
8c22a8f5 DE |
1032 | config SENSORS_ADS1015 |
1033 | tristate "Texas Instruments ADS1015" | |
1034 | depends on I2C | |
1035 | help | |
1036 | If you say yes here you get support for Texas Instruments ADS1015 | |
1037 | 12-bit 4-input ADC device. | |
1038 | ||
1039 | This driver can also be built as a module. If so, the module | |
1040 | will be called ads1015. | |
1041 | ||
5812f928 SH |
1042 | config SENSORS_ADS7828 |
1043 | tristate "Texas Instruments ADS7828" | |
1044 | depends on I2C | |
1045 | help | |
1046 | If you say yes here you get support for Texas Instruments ADS7828 | |
1047 | 12-bit 8-channel ADC device. | |
1048 | ||
1049 | This driver can also be built as a module. If so, the module | |
1050 | will be called ads7828. | |
1051 | ||
e0c70b80 PT |
1052 | config SENSORS_ADS7871 |
1053 | tristate "Texas Instruments ADS7871 A/D converter" | |
1054 | depends on SPI | |
1055 | help | |
1056 | If you say yes here you get support for TI ADS7871 & ADS7870 | |
1057 | ||
1058 | This driver can also be built as a module. If so, the module | |
1059 | will be called ads7871. | |
1060 | ||
b5430a04 TM |
1061 | config SENSORS_AMC6821 |
1062 | tristate "Texas Instruments AMC6821" | |
1063 | depends on I2C && EXPERIMENTAL | |
1064 | help | |
1065 | If you say yes here you get support for the Texas Instruments | |
1066 | AMC6821 hardware monitoring chips. | |
1067 | ||
1068 | This driver can also be build as a module. If so, the module | |
1069 | will be called amc6821. | |
1070 | ||
add77c64 KH |
1071 | config SENSORS_THMC50 |
1072 | tristate "Texas Instruments THMC50 / Analog Devices ADM1022" | |
0b22ce3b | 1073 | depends on I2C |
add77c64 KH |
1074 | help |
1075 | If you say yes here you get support for Texas Instruments THMC50 | |
1076 | sensor chips and clones: the Analog Devices ADM1022. | |
1077 | ||
1078 | This driver can also be built as a module. If so, the module | |
1079 | will be called thmc50. | |
1080 | ||
beb1b6bb | 1081 | config SENSORS_TMP102 |
cff37c9e | 1082 | tristate "Texas Instruments TMP102" |
beb1b6bb SK |
1083 | depends on I2C && EXPERIMENTAL |
1084 | help | |
1085 | If you say yes here you get support for Texas Instruments TMP102 | |
1086 | sensor chips. | |
1087 | ||
1088 | This driver can also be built as a module. If so, the module | |
1089 | will be called tmp102. | |
1090 | ||
ab2b79d5 HG |
1091 | config SENSORS_TMP401 |
1092 | tristate "Texas Instruments TMP401 and compatibles" | |
1093 | depends on I2C && EXPERIMENTAL | |
1094 | help | |
1095 | If you say yes here you get support for Texas Instruments TMP401 and | |
1096 | TMP411 temperature sensor chips. | |
1097 | ||
1098 | This driver can also be built as a module. If so, the module | |
1099 | will be called tmp401. | |
1100 | ||
9410700b AP |
1101 | config SENSORS_TMP421 |
1102 | tristate "Texas Instruments TMP421 and compatible" | |
1103 | depends on I2C && EXPERIMENTAL | |
1104 | help | |
1105 | If you say yes here you get support for Texas Instruments TMP421, | |
1106 | TMP422 and TMP423 temperature sensor chips. | |
1107 | ||
1108 | This driver can also be built as a module. If so, the module | |
1109 | will be called tmp421. | |
1110 | ||
0070bddf K |
1111 | config SENSORS_TWL4030_MADC |
1112 | tristate "Texas Instruments TWL4030 MADC Hwmon" | |
1113 | depends on TWL4030_MADC | |
1114 | help | |
1115 | If you say yes here you get hwmon support for triton | |
1116 | TWL4030-MADC. | |
1117 | ||
1118 | This driver can also be built as a module. If so it will be called | |
1119 | twl4030-madc-hwmon. | |
1120 | ||
70c38772 HW |
1121 | config SENSORS_VIA_CPUTEMP |
1122 | tristate "VIA CPU temperature sensor" | |
1123 | depends on X86 | |
764e043b | 1124 | select HWMON_VID |
70c38772 HW |
1125 | help |
1126 | If you say yes here you get support for the temperature | |
1127 | sensor inside your CPU. Supported are all known variants of | |
1128 | the VIA C7 and Nano. | |
1129 | ||
ad2f931d JD |
1130 | config SENSORS_VIA686A |
1131 | tristate "VIA686A" | |
2ec342e6 | 1132 | depends on PCI |
ad2f931d JD |
1133 | help |
1134 | If you say yes here you get support for the integrated sensors in | |
1135 | Via 686A/B South Bridges. | |
1136 | ||
1137 | This driver can also be built as a module. If so, the module | |
1138 | will be called via686a. | |
1139 | ||
ab41319e JH |
1140 | config SENSORS_VT1211 |
1141 | tristate "VIA VT1211" | |
ab41319e JH |
1142 | select HWMON_VID |
1143 | help | |
1144 | If you say yes here then you get support for hardware monitoring | |
1145 | features of the VIA VT1211 Super-I/O chip. | |
1146 | ||
1147 | This driver can also be built as a module. If so, the module | |
1148 | will be called vt1211. | |
1149 | ||
1de9e371 | 1150 | config SENSORS_VT8231 |
51bd5633 | 1151 | tristate "VIA VT8231" |
ec5e1a4b | 1152 | depends on PCI |
1de9e371 | 1153 | select HWMON_VID |
1de9e371 RL |
1154 | help |
1155 | If you say yes here then you get support for the integrated sensors | |
1156 | in the VIA VT8231 device. | |
1157 | ||
1158 | This driver can also be built as a module. If so, the module | |
1159 | will be called vt8231. | |
1160 | ||
ad2f931d | 1161 | config SENSORS_W83781D |
05663368 | 1162 | tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" |
1d72acf9 | 1163 | depends on I2C |
303760b4 | 1164 | select HWMON_VID |
ad2f931d JD |
1165 | help |
1166 | If you say yes here you get support for the Winbond W8378x series | |
05663368 JD |
1167 | of sensor chips: the W83781D, W83782D and W83783S, and the similar |
1168 | Asus AS99127F. | |
ad2f931d JD |
1169 | |
1170 | This driver can also be built as a module. If so, the module | |
1171 | will be called w83781d. | |
1172 | ||
9873964d CS |
1173 | config SENSORS_W83791D |
1174 | tristate "Winbond W83791D" | |
d1ebd59a | 1175 | depends on I2C |
9873964d CS |
1176 | select HWMON_VID |
1177 | help | |
1178 | If you say yes here you get support for the Winbond W83791D chip. | |
1179 | ||
1180 | This driver can also be built as a module. If so, the module | |
1181 | will be called w83791d. | |
1182 | ||
5563e27d M |
1183 | config SENSORS_W83792D |
1184 | tristate "Winbond W83792D" | |
0b22ce3b | 1185 | depends on I2C |
5563e27d M |
1186 | help |
1187 | If you say yes here you get support for the Winbond W83792D chip. | |
1188 | ||
1189 | This driver can also be built as a module. If so, the module | |
1190 | will be called w83792d. | |
1191 | ||
6800c3d0 RM |
1192 | config SENSORS_W83793 |
1193 | tristate "Winbond W83793" | |
1d72acf9 | 1194 | depends on I2C && EXPERIMENTAL |
7a5e6bc2 | 1195 | select HWMON_VID |
6800c3d0 RM |
1196 | help |
1197 | If you say yes here you get support for the Winbond W83793 | |
5852f960 SA |
1198 | hardware monitoring chip, including support for the integrated |
1199 | watchdog. | |
6800c3d0 RM |
1200 | |
1201 | This driver can also be built as a module. If so, the module | |
1202 | will be called w83793. | |
1203 | ||
792d376b WS |
1204 | config SENSORS_W83795 |
1205 | tristate "Winbond/Nuvoton W83795G/ADG" | |
1206 | depends on I2C && EXPERIMENTAL | |
1207 | help | |
1208 | If you say yes here you get support for the Winbond W83795G and | |
1209 | W83795ADG hardware monitoring chip. | |
1210 | ||
1211 | This driver can also be built as a module. If so, the module | |
1212 | will be called w83795. | |
1213 | ||
00030af2 JD |
1214 | config SENSORS_W83795_FANCTRL |
1215 | boolean "Include fan control support (DANGEROUS)" | |
1216 | depends on SENSORS_W83795 && EXPERIMENTAL | |
1217 | default n | |
1218 | help | |
1219 | If you say yes here, support for the both manual and automatic | |
1220 | fan control features will be included in the driver. | |
1221 | ||
1222 | This part of the code wasn't carefully reviewed and tested yet, | |
1223 | so enabling this option is strongly discouraged on production | |
1224 | servers. Only developers and testers should enable it for the | |
1225 | time being. | |
1226 | ||
1227 | Please also note that this option will create sysfs attribute | |
1228 | files which may change in the future, so you shouldn't rely | |
1229 | on them being stable. | |
1230 | ||
ad2f931d JD |
1231 | config SENSORS_W83L785TS |
1232 | tristate "Winbond W83L785TS-S" | |
1d72acf9 | 1233 | depends on I2C && EXPERIMENTAL |
ad2f931d JD |
1234 | help |
1235 | If you say yes here you get support for the Winbond W83L785TS-S | |
1236 | sensor chip, which is used on the Asus A7N8X, among other | |
1237 | motherboards. | |
1238 | ||
1239 | This driver can also be built as a module. If so, the module | |
1240 | will be called w83l785ts. | |
1241 | ||
85f03bcc KL |
1242 | config SENSORS_W83L786NG |
1243 | tristate "Winbond W83L786NG, W83L786NR" | |
1244 | depends on I2C && EXPERIMENTAL | |
1245 | help | |
1246 | If you say yes here you get support for the Winbond W83L786NG | |
1247 | and W83L786NR sensor chips. | |
1248 | ||
1249 | This driver can also be built as a module. If so, the module | |
1250 | will be called w83l786ng. | |
1251 | ||
ad2f931d | 1252 | config SENSORS_W83627HF |
c2db6ce1 | 1253 | tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" |
303760b4 | 1254 | select HWMON_VID |
ad2f931d JD |
1255 | help |
1256 | If you say yes here you get support for the Winbond W836X7 series | |
c2db6ce1 JD |
1257 | of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and |
1258 | W83697HF. | |
ad2f931d JD |
1259 | |
1260 | This driver can also be built as a module. If so, the module | |
1261 | will be called w83627hf. | |
1262 | ||
1263 | config SENSORS_W83627EHF | |
2dd59c26 | 1264 | tristate "Winbond W83627EHF/EHG/DHG, W83667HG, NCT6775F, NCT6776F" |
fc18d6c0 | 1265 | select HWMON_VID |
ad2f931d | 1266 | help |
658291fc | 1267 | If you say yes here you get support for the hardware |
ad2f931d | 1268 | monitoring functionality of the Winbond W83627EHF Super-I/O chip. |
ad2f931d | 1269 | |
8dd2d2ca | 1270 | This driver also supports the W83627EHG, which is the lead-free |
658291fc DH |
1271 | version of the W83627EHF, and the W83627DHG, which is a similar |
1272 | chip suited for specific Intel processors that use PECI such as | |
1273 | the Core 2 Duo. | |
8dd2d2ca | 1274 | |
2dd59c26 GR |
1275 | This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F |
1276 | (also known as W83667HG-I), and NCT6776F. | |
237c8d2f | 1277 | |
ad2f931d JD |
1278 | This driver can also be built as a module. If so, the module |
1279 | will be called w83627ehf. | |
1280 | ||
08bad5a8 MB |
1281 | config SENSORS_WM831X |
1282 | tristate "WM831x PMICs" | |
1283 | depends on MFD_WM831X | |
1284 | help | |
1285 | If you say yes here you get support for the hardware | |
1286 | monitoring functionality of the Wolfson Microelectronics | |
1287 | WM831x series of PMICs. | |
1288 | ||
1289 | This driver can also be built as a module. If so, the module | |
1290 | will be called wm831x-hwmon. | |
1291 | ||
fb6c023a MB |
1292 | config SENSORS_WM8350 |
1293 | tristate "Wolfson Microelectronics WM835x" | |
1294 | depends on MFD_WM8350 | |
1295 | help | |
1296 | If you say yes here you get support for the hardware | |
1297 | monitoring features of the WM835x series of PMICs. | |
1298 | ||
1299 | This driver can also be built as a module. If so, the module | |
1300 | will be called wm8350-hwmon. | |
ad2f931d | 1301 | |
e0418088 DM |
1302 | config SENSORS_ULTRA45 |
1303 | tristate "Sun Ultra45 PIC16F747" | |
1304 | depends on SPARC64 | |
1305 | help | |
1306 | This driver provides support for the Ultra45 workstation environmental | |
1307 | sensors. | |
1308 | ||
6f2fad74 NB |
1309 | config SENSORS_APPLESMC |
1310 | tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" | |
548c343b | 1311 | depends on INPUT && X86 |
6f2fad74 NB |
1312 | select NEW_LEDS |
1313 | select LEDS_CLASS | |
d5cf2b99 | 1314 | select INPUT_POLLDEV |
6f2fad74 NB |
1315 | default n |
1316 | help | |
1317 | This driver provides support for the Apple System Management | |
1318 | Controller, which provides an accelerometer (Apple Sudden Motion | |
1319 | Sensor), light sensors, temperature sensors, keyboard backlight | |
1320 | control and fan control. | |
1321 | ||
1322 | Only Intel-based Apple's computers are supported (MacBook Pro, | |
1323 | MacBook, MacMini). | |
1324 | ||
1325 | Data from the different sensors, keyboard backlight control and fan | |
1326 | control are accessible via sysfs. | |
1327 | ||
1328 | This driver also provides an absolute input class device, allowing | |
1329 | the laptop to act as a pinball machine-esque joystick. | |
1330 | ||
1331 | Say Y here if you have an applicable laptop and want to experience | |
1332 | the awesome power of applesmc. | |
1333 | ||
93ee0a75 LF |
1334 | config SENSORS_MC13783_ADC |
1335 | tristate "Freescale MC13783 ADC" | |
1336 | depends on MFD_MC13783 | |
1337 | help | |
1338 | Support for the A/D converter on MC13783 PMIC. | |
1339 | ||
61cba5c2 JD |
1340 | if ACPI |
1341 | ||
1342 | comment "ACPI drivers" | |
1343 | ||
7d033365 JD |
1344 | config SENSORS_ACPI_POWER |
1345 | tristate "ACPI 4.0 power meter" | |
1346 | help | |
1347 | This driver exposes ACPI 4.0 power meters as hardware monitoring | |
1348 | devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware | |
1349 | and a power meter. | |
1350 | ||
1351 | To compile this driver as a module, choose M here: | |
1352 | the module will be called acpi_power_meter. | |
1353 | ||
61cba5c2 JD |
1354 | config SENSORS_ATK0110 |
1355 | tristate "ASUS ATK0110" | |
1356 | depends on X86 && EXPERIMENTAL | |
1357 | help | |
1358 | If you say yes here you get support for the ACPI hardware | |
1359 | monitoring interface found in many ASUS motherboards. This | |
1360 | driver will provide readings of fans, voltages and temperatures | |
1361 | through the system firmware. | |
1362 | ||
1363 | This driver can also be built as a module. If so, the module | |
1364 | will be called asus_atk0110. | |
1365 | ||
61cba5c2 | 1366 | endif # ACPI |
ad2f931d | 1367 | |
1d72acf9 | 1368 | endif # HWMON |