Commit | Line | Data |
---|---|---|
f2b84bbc | 1 | /* |
93d0cc58 | 2 | abituguru.c Copyright (c) 2005-2006 Hans de Goede <hdegoede@redhat.com> |
f2b84bbc HG |
3 | |
4 | This program is free software; you can redistribute it and/or modify | |
5 | it under the terms of the GNU General Public License as published by | |
6 | the Free Software Foundation; either version 2 of the License, or | |
7 | (at your option) any later version. | |
8 | ||
9 | This program is distributed in the hope that it will be useful, | |
10 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
12 | GNU General Public License for more details. | |
13 | ||
14 | You should have received a copy of the GNU General Public License | |
15 | along with this program; if not, write to the Free Software | |
16 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
17 | */ | |
18 | /* | |
3faa1ffb HG |
19 | This driver supports the sensor part of the first and second revision of |
20 | the custom Abit uGuru chip found on Abit uGuru motherboards. Note: because | |
21 | of lack of specs the CPU/RAM voltage & frequency control is not supported! | |
f2b84bbc | 22 | */ |
28ebfa13 JP |
23 | |
24 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
25 | ||
f2b84bbc | 26 | #include <linux/module.h> |
f6a57033 | 27 | #include <linux/sched.h> |
f2b84bbc HG |
28 | #include <linux/init.h> |
29 | #include <linux/slab.h> | |
30 | #include <linux/jiffies.h> | |
31 | #include <linux/mutex.h> | |
32 | #include <linux/err.h> | |
faf9b616 | 33 | #include <linux/delay.h> |
f2b84bbc HG |
34 | #include <linux/platform_device.h> |
35 | #include <linux/hwmon.h> | |
36 | #include <linux/hwmon-sysfs.h> | |
c182f5bb | 37 | #include <linux/dmi.h> |
6055fae8 | 38 | #include <linux/io.h> |
f2b84bbc HG |
39 | |
40 | /* Banks */ | |
41 | #define ABIT_UGURU_ALARM_BANK 0x20 /* 1x 3 bytes */ | |
42 | #define ABIT_UGURU_SENSOR_BANK1 0x21 /* 16x volt and temp */ | |
43 | #define ABIT_UGURU_FAN_PWM 0x24 /* 3x 5 bytes */ | |
44 | #define ABIT_UGURU_SENSOR_BANK2 0x26 /* fans */ | |
a2392e0b HG |
45 | /* max nr of sensors in bank1, a bank1 sensor can be in, temp or nc */ |
46 | #define ABIT_UGURU_MAX_BANK1_SENSORS 16 | |
47 | /* Warning if you increase one of the 2 MAX defines below to 10 or higher you | |
48 | should adjust the belonging _NAMES_LENGTH macro for the 2 digit number! */ | |
f2b84bbc HG |
49 | /* max nr of sensors in bank2, currently mb's with max 6 fans are known */ |
50 | #define ABIT_UGURU_MAX_BANK2_SENSORS 6 | |
51 | /* max nr of pwm outputs, currently mb's with max 5 pwm outputs are known */ | |
52 | #define ABIT_UGURU_MAX_PWMS 5 | |
53 | /* uGuru sensor bank 1 flags */ /* Alarm if: */ | |
54 | #define ABIT_UGURU_TEMP_HIGH_ALARM_ENABLE 0x01 /* temp over warn */ | |
55 | #define ABIT_UGURU_VOLT_HIGH_ALARM_ENABLE 0x02 /* volt over max */ | |
56 | #define ABIT_UGURU_VOLT_LOW_ALARM_ENABLE 0x04 /* volt under min */ | |
57 | #define ABIT_UGURU_TEMP_HIGH_ALARM_FLAG 0x10 /* temp is over warn */ | |
58 | #define ABIT_UGURU_VOLT_HIGH_ALARM_FLAG 0x20 /* volt is over max */ | |
59 | #define ABIT_UGURU_VOLT_LOW_ALARM_FLAG 0x40 /* volt is under min */ | |
60 | /* uGuru sensor bank 2 flags */ /* Alarm if: */ | |
61 | #define ABIT_UGURU_FAN_LOW_ALARM_ENABLE 0x01 /* fan under min */ | |
62 | /* uGuru sensor bank common flags */ | |
63 | #define ABIT_UGURU_BEEP_ENABLE 0x08 /* beep if alarm */ | |
64 | #define ABIT_UGURU_SHUTDOWN_ENABLE 0x80 /* shutdown if alarm */ | |
65 | /* uGuru fan PWM (speed control) flags */ | |
66 | #define ABIT_UGURU_FAN_PWM_ENABLE 0x80 /* enable speed control */ | |
67 | /* Values used for conversion */ | |
68 | #define ABIT_UGURU_FAN_MAX 15300 /* RPM */ | |
69 | /* Bank1 sensor types */ | |
70 | #define ABIT_UGURU_IN_SENSOR 0 | |
71 | #define ABIT_UGURU_TEMP_SENSOR 1 | |
72 | #define ABIT_UGURU_NC 2 | |
faf9b616 HG |
73 | /* In many cases we need to wait for the uGuru to reach a certain status, most |
74 | of the time it will reach this status within 30 - 90 ISA reads, and thus we | |
75 | can best busy wait. This define gives the total amount of reads to try. */ | |
76 | #define ABIT_UGURU_WAIT_TIMEOUT 125 | |
77 | /* However sometimes older versions of the uGuru seem to be distracted and they | |
78 | do not respond for a long time. To handle this we sleep before each of the | |
79 | last ABIT_UGURU_WAIT_TIMEOUT_SLEEP tries. */ | |
80 | #define ABIT_UGURU_WAIT_TIMEOUT_SLEEP 5 | |
f2b84bbc | 81 | /* Normally all expected status in abituguru_ready, are reported after the |
faf9b616 HG |
82 | first read, but sometimes not and we need to poll. */ |
83 | #define ABIT_UGURU_READY_TIMEOUT 5 | |
f2b84bbc HG |
84 | /* Maximum 3 retries on timedout reads/writes, delay 200 ms before retrying */ |
85 | #define ABIT_UGURU_MAX_RETRIES 3 | |
86 | #define ABIT_UGURU_RETRY_DELAY (HZ/5) | |
a2392e0b | 87 | /* Maximum 2 timeouts in abituguru_update_device, iow 3 in a row is an error */ |
f2b84bbc | 88 | #define ABIT_UGURU_MAX_TIMEOUTS 2 |
a2392e0b HG |
89 | /* utility macros */ |
90 | #define ABIT_UGURU_NAME "abituguru" | |
91 | #define ABIT_UGURU_DEBUG(level, format, arg...) \ | |
92 | if (level <= verbose) \ | |
93 | printk(KERN_DEBUG ABIT_UGURU_NAME ": " format , ## arg) | |
94 | /* Macros to help calculate the sysfs_names array length */ | |
95 | /* sum of strlen of: in??_input\0, in??_{min,max}\0, in??_{min,max}_alarm\0, | |
96 | in??_{min,max}_alarm_enable\0, in??_beep\0, in??_shutdown\0 */ | |
97 | #define ABITUGURU_IN_NAMES_LENGTH (11 + 2 * 9 + 2 * 15 + 2 * 22 + 10 + 14) | |
98 | /* sum of strlen of: temp??_input\0, temp??_max\0, temp??_crit\0, | |
99 | temp??_alarm\0, temp??_alarm_enable\0, temp??_beep\0, temp??_shutdown\0 */ | |
100 | #define ABITUGURU_TEMP_NAMES_LENGTH (13 + 11 + 12 + 13 + 20 + 12 + 16) | |
101 | /* sum of strlen of: fan?_input\0, fan?_min\0, fan?_alarm\0, | |
102 | fan?_alarm_enable\0, fan?_beep\0, fan?_shutdown\0 */ | |
103 | #define ABITUGURU_FAN_NAMES_LENGTH (11 + 9 + 11 + 18 + 10 + 14) | |
104 | /* sum of strlen of: pwm?_enable\0, pwm?_auto_channels_temp\0, | |
105 | pwm?_auto_point{1,2}_pwm\0, pwm?_auto_point{1,2}_temp\0 */ | |
106 | #define ABITUGURU_PWM_NAMES_LENGTH (12 + 24 + 2 * 21 + 2 * 22) | |
107 | /* IN_NAMES_LENGTH > TEMP_NAMES_LENGTH so assume all bank1 sensors are in */ | |
108 | #define ABITUGURU_SYSFS_NAMES_LENGTH ( \ | |
109 | ABIT_UGURU_MAX_BANK1_SENSORS * ABITUGURU_IN_NAMES_LENGTH + \ | |
110 | ABIT_UGURU_MAX_BANK2_SENSORS * ABITUGURU_FAN_NAMES_LENGTH + \ | |
111 | ABIT_UGURU_MAX_PWMS * ABITUGURU_PWM_NAMES_LENGTH) | |
112 | ||
113 | /* All the macros below are named identical to the oguru and oguru2 programs | |
f2b84bbc HG |
114 | reverse engineered by Olle Sandberg, hence the names might not be 100% |
115 | logical. I could come up with better names, but I prefer keeping the names | |
116 | identical so that this driver can be compared with his work more easily. */ | |
117 | /* Two i/o-ports are used by uGuru */ | |
118 | #define ABIT_UGURU_BASE 0x00E0 | |
119 | /* Used to tell uGuru what to read and to read the actual data */ | |
120 | #define ABIT_UGURU_CMD 0x00 | |
121 | /* Mostly used to check if uGuru is busy */ | |
122 | #define ABIT_UGURU_DATA 0x04 | |
123 | #define ABIT_UGURU_REGION_LENGTH 5 | |
124 | /* uGuru status' */ | |
125 | #define ABIT_UGURU_STATUS_WRITE 0x00 /* Ready to be written */ | |
126 | #define ABIT_UGURU_STATUS_READ 0x01 /* Ready to be read */ | |
127 | #define ABIT_UGURU_STATUS_INPUT 0x08 /* More input */ | |
128 | #define ABIT_UGURU_STATUS_READY 0x09 /* Ready to be written */ | |
f2b84bbc HG |
129 | |
130 | /* Constants */ | |
131 | /* in (Volt) sensors go up to 3494 mV, temp to 255000 millidegrees Celsius */ | |
132 | static const int abituguru_bank1_max_value[2] = { 3494, 255000 }; | |
133 | /* Min / Max allowed values for sensor2 (fan) alarm threshold, these values | |
134 | correspond to 300-3000 RPM */ | |
135 | static const u8 abituguru_bank2_min_threshold = 5; | |
136 | static const u8 abituguru_bank2_max_threshold = 50; | |
137 | /* Register 0 is a bitfield, 1 and 2 are pwm settings (255 = 100%), 3 and 4 | |
138 | are temperature trip points. */ | |
139 | static const int abituguru_pwm_settings_multiplier[5] = { 0, 1, 1, 1000, 1000 }; | |
140 | /* Min / Max allowed values for pwm_settings. Note: pwm1 (CPU fan) is a | |
141 | special case the minium allowed pwm% setting for this is 30% (77) on | |
142 | some MB's this special case is handled in the code! */ | |
143 | static const u8 abituguru_pwm_min[5] = { 0, 170, 170, 25, 25 }; | |
144 | static const u8 abituguru_pwm_max[5] = { 0, 255, 255, 75, 75 }; | |
145 | ||
146 | ||
147 | /* Insmod parameters */ | |
148 | static int force; | |
149 | module_param(force, bool, 0); | |
150 | MODULE_PARM_DESC(force, "Set to one to force detection."); | |
9b2ad129 HG |
151 | static int bank1_types[ABIT_UGURU_MAX_BANK1_SENSORS] = { -1, -1, -1, -1, -1, |
152 | -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }; | |
153 | module_param_array(bank1_types, int, NULL, 0); | |
154 | MODULE_PARM_DESC(bank1_types, "Bank1 sensortype autodetection override:\n" | |
155 | " -1 autodetect\n" | |
156 | " 0 volt sensor\n" | |
157 | " 1 temp sensor\n" | |
158 | " 2 not connected"); | |
f2b84bbc HG |
159 | static int fan_sensors; |
160 | module_param(fan_sensors, int, 0); | |
161 | MODULE_PARM_DESC(fan_sensors, "Number of fan sensors on the uGuru " | |
162 | "(0 = autodetect)"); | |
163 | static int pwms; | |
164 | module_param(pwms, int, 0); | |
165 | MODULE_PARM_DESC(pwms, "Number of PWMs on the uGuru " | |
166 | "(0 = autodetect)"); | |
167 | ||
168 | /* Default verbose is 2, since this driver is still in the testing phase */ | |
169 | static int verbose = 2; | |
170 | module_param(verbose, int, 0644); | |
171 | MODULE_PARM_DESC(verbose, "How verbose should the driver be? (0-3):\n" | |
172 | " 0 normal output\n" | |
173 | " 1 + verbose error reporting\n" | |
174 | " 2 + sensors type probing info\n" | |
175 | " 3 + retryable error reporting"); | |
176 | ||
177 | ||
178 | /* For the Abit uGuru, we need to keep some data in memory. | |
179 | The structure is dynamically allocated, at the same time when a new | |
180 | abituguru device is allocated. */ | |
181 | struct abituguru_data { | |
1beeffe4 | 182 | struct device *hwmon_dev; /* hwmon registered device */ |
f2b84bbc HG |
183 | struct mutex update_lock; /* protect access to data and uGuru */ |
184 | unsigned long last_updated; /* In jiffies */ | |
185 | unsigned short addr; /* uguru base address */ | |
186 | char uguru_ready; /* is the uguru in ready state? */ | |
187 | unsigned char update_timeouts; /* number of update timeouts since last | |
188 | successful update */ | |
189 | ||
190 | /* The sysfs attr and their names are generated automatically, for bank1 | |
191 | we cannot use a predefined array because we don't know beforehand | |
192 | of a sensor is a volt or a temp sensor, for bank2 and the pwms its | |
193 | easier todo things the same way. For in sensors we have 9 (temp 7) | |
194 | sysfs entries per sensor, for bank2 and pwms 6. */ | |
a2392e0b HG |
195 | struct sensor_device_attribute_2 sysfs_attr[ |
196 | ABIT_UGURU_MAX_BANK1_SENSORS * 9 + | |
f2b84bbc | 197 | ABIT_UGURU_MAX_BANK2_SENSORS * 6 + ABIT_UGURU_MAX_PWMS * 6]; |
a2392e0b HG |
198 | /* Buffer to store the dynamically generated sysfs names */ |
199 | char sysfs_names[ABITUGURU_SYSFS_NAMES_LENGTH]; | |
f2b84bbc HG |
200 | |
201 | /* Bank 1 data */ | |
a2392e0b HG |
202 | /* number of and addresses of [0] in, [1] temp sensors */ |
203 | u8 bank1_sensors[2]; | |
204 | u8 bank1_address[2][ABIT_UGURU_MAX_BANK1_SENSORS]; | |
205 | u8 bank1_value[ABIT_UGURU_MAX_BANK1_SENSORS]; | |
206 | /* This array holds 3 entries per sensor for the bank 1 sensor settings | |
f2b84bbc | 207 | (flags, min, max for voltage / flags, warn, shutdown for temp). */ |
a2392e0b | 208 | u8 bank1_settings[ABIT_UGURU_MAX_BANK1_SENSORS][3]; |
f2b84bbc HG |
209 | /* Maximum value for each sensor used for scaling in mV/millidegrees |
210 | Celsius. */ | |
a2392e0b | 211 | int bank1_max_value[ABIT_UGURU_MAX_BANK1_SENSORS]; |
f2b84bbc HG |
212 | |
213 | /* Bank 2 data, ABIT_UGURU_MAX_BANK2_SENSORS entries for bank2 */ | |
214 | u8 bank2_sensors; /* actual number of bank2 sensors found */ | |
215 | u8 bank2_value[ABIT_UGURU_MAX_BANK2_SENSORS]; | |
216 | u8 bank2_settings[ABIT_UGURU_MAX_BANK2_SENSORS][2]; /* flags, min */ | |
217 | ||
218 | /* Alarms 2 bytes for bank1, 1 byte for bank2 */ | |
219 | u8 alarms[3]; | |
220 | ||
221 | /* Fan PWM (speed control) 5 bytes per PWM */ | |
222 | u8 pwms; /* actual number of pwms found */ | |
223 | u8 pwm_settings[ABIT_UGURU_MAX_PWMS][5]; | |
224 | }; | |
225 | ||
28ebfa13 JP |
226 | static const char *never_happen = "This should never happen."; |
227 | static const char *report_this = | |
228 | "Please report this to the abituguru maintainer (see MAINTAINERS)"; | |
229 | ||
f2b84bbc HG |
230 | /* wait till the uguru is in the specified state */ |
231 | static int abituguru_wait(struct abituguru_data *data, u8 state) | |
232 | { | |
233 | int timeout = ABIT_UGURU_WAIT_TIMEOUT; | |
234 | ||
235 | while (inb_p(data->addr + ABIT_UGURU_DATA) != state) { | |
236 | timeout--; | |
237 | if (timeout == 0) | |
238 | return -EBUSY; | |
faf9b616 HG |
239 | /* sleep a bit before our last few tries, see the comment on |
240 | this where ABIT_UGURU_WAIT_TIMEOUT_SLEEP is defined. */ | |
241 | if (timeout <= ABIT_UGURU_WAIT_TIMEOUT_SLEEP) | |
242 | msleep(0); | |
f2b84bbc HG |
243 | } |
244 | return 0; | |
245 | } | |
246 | ||
247 | /* Put the uguru in ready for input state */ | |
248 | static int abituguru_ready(struct abituguru_data *data) | |
249 | { | |
250 | int timeout = ABIT_UGURU_READY_TIMEOUT; | |
251 | ||
252 | if (data->uguru_ready) | |
253 | return 0; | |
254 | ||
255 | /* Reset? / Prepare for next read/write cycle */ | |
256 | outb(0x00, data->addr + ABIT_UGURU_DATA); | |
257 | ||
258 | /* Wait till the uguru is ready */ | |
259 | if (abituguru_wait(data, ABIT_UGURU_STATUS_READY)) { | |
260 | ABIT_UGURU_DEBUG(1, | |
261 | "timeout exceeded waiting for ready state\n"); | |
262 | return -EIO; | |
263 | } | |
264 | ||
265 | /* Cmd port MUST be read now and should contain 0xAC */ | |
266 | while (inb_p(data->addr + ABIT_UGURU_CMD) != 0xAC) { | |
267 | timeout--; | |
268 | if (timeout == 0) { | |
269 | ABIT_UGURU_DEBUG(1, | |
270 | "CMD reg does not hold 0xAC after ready command\n"); | |
271 | return -EIO; | |
272 | } | |
faf9b616 | 273 | msleep(0); |
f2b84bbc HG |
274 | } |
275 | ||
276 | /* After this the ABIT_UGURU_DATA port should contain | |
277 | ABIT_UGURU_STATUS_INPUT */ | |
278 | timeout = ABIT_UGURU_READY_TIMEOUT; | |
279 | while (inb_p(data->addr + ABIT_UGURU_DATA) != ABIT_UGURU_STATUS_INPUT) { | |
280 | timeout--; | |
281 | if (timeout == 0) { | |
282 | ABIT_UGURU_DEBUG(1, | |
283 | "state != more input after ready command\n"); | |
284 | return -EIO; | |
285 | } | |
faf9b616 | 286 | msleep(0); |
f2b84bbc HG |
287 | } |
288 | ||
289 | data->uguru_ready = 1; | |
290 | return 0; | |
291 | } | |
292 | ||
293 | /* Send the bank and then sensor address to the uGuru for the next read/write | |
294 | cycle. This function gets called as the first part of a read/write by | |
295 | abituguru_read and abituguru_write. This function should never be | |
296 | called by any other function. */ | |
297 | static int abituguru_send_address(struct abituguru_data *data, | |
298 | u8 bank_addr, u8 sensor_addr, int retries) | |
299 | { | |
300 | /* assume the caller does error handling itself if it has not requested | |
301 | any retries, and thus be quiet. */ | |
302 | int report_errors = retries; | |
303 | ||
304 | for (;;) { | |
305 | /* Make sure the uguru is ready and then send the bank address, | |
306 | after this the uguru is no longer "ready". */ | |
307 | if (abituguru_ready(data) != 0) | |
308 | return -EIO; | |
309 | outb(bank_addr, data->addr + ABIT_UGURU_DATA); | |
310 | data->uguru_ready = 0; | |
311 | ||
312 | /* Wait till the uguru is ABIT_UGURU_STATUS_INPUT state again | |
313 | and send the sensor addr */ | |
314 | if (abituguru_wait(data, ABIT_UGURU_STATUS_INPUT)) { | |
315 | if (retries) { | |
316 | ABIT_UGURU_DEBUG(3, "timeout exceeded " | |
317 | "waiting for more input state, %d " | |
318 | "tries remaining\n", retries); | |
319 | set_current_state(TASK_UNINTERRUPTIBLE); | |
320 | schedule_timeout(ABIT_UGURU_RETRY_DELAY); | |
321 | retries--; | |
322 | continue; | |
323 | } | |
324 | if (report_errors) | |
325 | ABIT_UGURU_DEBUG(1, "timeout exceeded " | |
326 | "waiting for more input state " | |
327 | "(bank: %d)\n", (int)bank_addr); | |
328 | return -EBUSY; | |
329 | } | |
330 | outb(sensor_addr, data->addr + ABIT_UGURU_CMD); | |
331 | return 0; | |
332 | } | |
333 | } | |
334 | ||
335 | /* Read count bytes from sensor sensor_addr in bank bank_addr and store the | |
336 | result in buf, retry the send address part of the read retries times. */ | |
337 | static int abituguru_read(struct abituguru_data *data, | |
338 | u8 bank_addr, u8 sensor_addr, u8 *buf, int count, int retries) | |
339 | { | |
340 | int i; | |
341 | ||
342 | /* Send the address */ | |
343 | i = abituguru_send_address(data, bank_addr, sensor_addr, retries); | |
344 | if (i) | |
345 | return i; | |
346 | ||
347 | /* And read the data */ | |
348 | for (i = 0; i < count; i++) { | |
349 | if (abituguru_wait(data, ABIT_UGURU_STATUS_READ)) { | |
faf9b616 HG |
350 | ABIT_UGURU_DEBUG(retries ? 1 : 3, |
351 | "timeout exceeded waiting for " | |
f2b84bbc HG |
352 | "read state (bank: %d, sensor: %d)\n", |
353 | (int)bank_addr, (int)sensor_addr); | |
354 | break; | |
355 | } | |
356 | buf[i] = inb(data->addr + ABIT_UGURU_CMD); | |
357 | } | |
358 | ||
359 | /* Last put the chip back in ready state */ | |
360 | abituguru_ready(data); | |
361 | ||
362 | return i; | |
363 | } | |
364 | ||
365 | /* Write count bytes from buf to sensor sensor_addr in bank bank_addr, the send | |
366 | address part of the write is always retried ABIT_UGURU_MAX_RETRIES times. */ | |
367 | static int abituguru_write(struct abituguru_data *data, | |
368 | u8 bank_addr, u8 sensor_addr, u8 *buf, int count) | |
369 | { | |
faf9b616 HG |
370 | /* We use the ready timeout as we have to wait for 0xAC just like the |
371 | ready function */ | |
372 | int i, timeout = ABIT_UGURU_READY_TIMEOUT; | |
f2b84bbc HG |
373 | |
374 | /* Send the address */ | |
375 | i = abituguru_send_address(data, bank_addr, sensor_addr, | |
376 | ABIT_UGURU_MAX_RETRIES); | |
377 | if (i) | |
378 | return i; | |
379 | ||
380 | /* And write the data */ | |
381 | for (i = 0; i < count; i++) { | |
382 | if (abituguru_wait(data, ABIT_UGURU_STATUS_WRITE)) { | |
383 | ABIT_UGURU_DEBUG(1, "timeout exceeded waiting for " | |
384 | "write state (bank: %d, sensor: %d)\n", | |
385 | (int)bank_addr, (int)sensor_addr); | |
386 | break; | |
387 | } | |
388 | outb(buf[i], data->addr + ABIT_UGURU_CMD); | |
389 | } | |
390 | ||
391 | /* Now we need to wait till the chip is ready to be read again, | |
faf9b616 HG |
392 | so that we can read 0xAC as confirmation that our write has |
393 | succeeded. */ | |
f2b84bbc HG |
394 | if (abituguru_wait(data, ABIT_UGURU_STATUS_READ)) { |
395 | ABIT_UGURU_DEBUG(1, "timeout exceeded waiting for read state " | |
396 | "after write (bank: %d, sensor: %d)\n", (int)bank_addr, | |
397 | (int)sensor_addr); | |
398 | return -EIO; | |
399 | } | |
400 | ||
401 | /* Cmd port MUST be read now and should contain 0xAC */ | |
faf9b616 HG |
402 | while (inb_p(data->addr + ABIT_UGURU_CMD) != 0xAC) { |
403 | timeout--; | |
404 | if (timeout == 0) { | |
405 | ABIT_UGURU_DEBUG(1, "CMD reg does not hold 0xAC after " | |
406 | "write (bank: %d, sensor: %d)\n", | |
407 | (int)bank_addr, (int)sensor_addr); | |
408 | return -EIO; | |
409 | } | |
410 | msleep(0); | |
f2b84bbc HG |
411 | } |
412 | ||
413 | /* Last put the chip back in ready state */ | |
414 | abituguru_ready(data); | |
415 | ||
416 | return i; | |
417 | } | |
418 | ||
419 | /* Detect sensor type. Temp and Volt sensors are enabled with | |
420 | different masks and will ignore enable masks not meant for them. | |
421 | This enables us to test what kind of sensor we're dealing with. | |
422 | By setting the alarm thresholds so that we will always get an | |
423 | alarm for sensor type X and then enabling the sensor as sensor type | |
424 | X, if we then get an alarm it is a sensor of type X. */ | |
425 | static int __devinit | |
426 | abituguru_detect_bank1_sensor_type(struct abituguru_data *data, | |
427 | u8 sensor_addr) | |
428 | { | |
e432dc81 | 429 | u8 val, test_flag, buf[3]; |
faf9b616 | 430 | int i, ret = -ENODEV; /* error is the most common used retval :| */ |
f2b84bbc | 431 | |
9b2ad129 HG |
432 | /* If overriden by the user return the user selected type */ |
433 | if (bank1_types[sensor_addr] >= ABIT_UGURU_IN_SENSOR && | |
434 | bank1_types[sensor_addr] <= ABIT_UGURU_NC) { | |
435 | ABIT_UGURU_DEBUG(2, "assuming sensor type %d for bank1 sensor " | |
436 | "%d because of \"bank1_types\" module param\n", | |
437 | bank1_types[sensor_addr], (int)sensor_addr); | |
438 | return bank1_types[sensor_addr]; | |
439 | } | |
440 | ||
f2b84bbc HG |
441 | /* First read the sensor and the current settings */ |
442 | if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1, sensor_addr, &val, | |
443 | 1, ABIT_UGURU_MAX_RETRIES) != 1) | |
a2392e0b | 444 | return -ENODEV; |
f2b84bbc HG |
445 | |
446 | /* Test val is sane / usable for sensor type detection. */ | |
e432dc81 | 447 | if ((val < 10u) || (val > 250u)) { |
28ebfa13 | 448 | pr_warn("bank1-sensor: %d reading (%d) too close to limits, " |
f2b84bbc HG |
449 | "unable to determine sensor type, skipping sensor\n", |
450 | (int)sensor_addr, (int)val); | |
451 | /* assume no sensor is there for sensors for which we can't | |
452 | determine the sensor type because their reading is too close | |
453 | to their limits, this usually means no sensor is there. */ | |
454 | return ABIT_UGURU_NC; | |
455 | } | |
456 | ||
457 | ABIT_UGURU_DEBUG(2, "testing bank1 sensor %d\n", (int)sensor_addr); | |
458 | /* Volt sensor test, enable volt low alarm, set min value ridicously | |
e432dc81 HG |
459 | high, or vica versa if the reading is very high. If its a volt |
460 | sensor this should always give us an alarm. */ | |
461 | if (val <= 240u) { | |
462 | buf[0] = ABIT_UGURU_VOLT_LOW_ALARM_ENABLE; | |
463 | buf[1] = 245; | |
464 | buf[2] = 250; | |
465 | test_flag = ABIT_UGURU_VOLT_LOW_ALARM_FLAG; | |
466 | } else { | |
467 | buf[0] = ABIT_UGURU_VOLT_HIGH_ALARM_ENABLE; | |
468 | buf[1] = 5; | |
469 | buf[2] = 10; | |
470 | test_flag = ABIT_UGURU_VOLT_HIGH_ALARM_FLAG; | |
471 | } | |
472 | ||
f2b84bbc HG |
473 | if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr, |
474 | buf, 3) != 3) | |
faf9b616 | 475 | goto abituguru_detect_bank1_sensor_type_exit; |
f2b84bbc HG |
476 | /* Now we need 20 ms to give the uguru time to read the sensors |
477 | and raise a voltage alarm */ | |
478 | set_current_state(TASK_UNINTERRUPTIBLE); | |
479 | schedule_timeout(HZ/50); | |
480 | /* Check for alarm and check the alarm is a volt low alarm. */ | |
481 | if (abituguru_read(data, ABIT_UGURU_ALARM_BANK, 0, buf, 3, | |
482 | ABIT_UGURU_MAX_RETRIES) != 3) | |
faf9b616 | 483 | goto abituguru_detect_bank1_sensor_type_exit; |
f2b84bbc HG |
484 | if (buf[sensor_addr/8] & (0x01 << (sensor_addr % 8))) { |
485 | if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1 + 1, | |
486 | sensor_addr, buf, 3, | |
487 | ABIT_UGURU_MAX_RETRIES) != 3) | |
faf9b616 | 488 | goto abituguru_detect_bank1_sensor_type_exit; |
e432dc81 | 489 | if (buf[0] & test_flag) { |
f2b84bbc | 490 | ABIT_UGURU_DEBUG(2, " found volt sensor\n"); |
faf9b616 HG |
491 | ret = ABIT_UGURU_IN_SENSOR; |
492 | goto abituguru_detect_bank1_sensor_type_exit; | |
f2b84bbc HG |
493 | } else |
494 | ABIT_UGURU_DEBUG(2, " alarm raised during volt " | |
e432dc81 | 495 | "sensor test, but volt range flag not set\n"); |
f2b84bbc HG |
496 | } else |
497 | ABIT_UGURU_DEBUG(2, " alarm not raised during volt sensor " | |
498 | "test\n"); | |
499 | ||
500 | /* Temp sensor test, enable sensor as a temp sensor, set beep value | |
501 | ridicously low (but not too low, otherwise uguru ignores it). | |
502 | If its a temp sensor this should always give us an alarm. */ | |
503 | buf[0] = ABIT_UGURU_TEMP_HIGH_ALARM_ENABLE; | |
504 | buf[1] = 5; | |
505 | buf[2] = 10; | |
506 | if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr, | |
507 | buf, 3) != 3) | |
faf9b616 | 508 | goto abituguru_detect_bank1_sensor_type_exit; |
f2b84bbc HG |
509 | /* Now we need 50 ms to give the uguru time to read the sensors |
510 | and raise a temp alarm */ | |
511 | set_current_state(TASK_UNINTERRUPTIBLE); | |
512 | schedule_timeout(HZ/20); | |
513 | /* Check for alarm and check the alarm is a temp high alarm. */ | |
514 | if (abituguru_read(data, ABIT_UGURU_ALARM_BANK, 0, buf, 3, | |
515 | ABIT_UGURU_MAX_RETRIES) != 3) | |
faf9b616 | 516 | goto abituguru_detect_bank1_sensor_type_exit; |
f2b84bbc HG |
517 | if (buf[sensor_addr/8] & (0x01 << (sensor_addr % 8))) { |
518 | if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1 + 1, | |
519 | sensor_addr, buf, 3, | |
520 | ABIT_UGURU_MAX_RETRIES) != 3) | |
faf9b616 | 521 | goto abituguru_detect_bank1_sensor_type_exit; |
f2b84bbc | 522 | if (buf[0] & ABIT_UGURU_TEMP_HIGH_ALARM_FLAG) { |
f2b84bbc | 523 | ABIT_UGURU_DEBUG(2, " found temp sensor\n"); |
faf9b616 HG |
524 | ret = ABIT_UGURU_TEMP_SENSOR; |
525 | goto abituguru_detect_bank1_sensor_type_exit; | |
f2b84bbc HG |
526 | } else |
527 | ABIT_UGURU_DEBUG(2, " alarm raised during temp " | |
528 | "sensor test, but temp high flag not set\n"); | |
529 | } else | |
530 | ABIT_UGURU_DEBUG(2, " alarm not raised during temp sensor " | |
531 | "test\n"); | |
532 | ||
faf9b616 HG |
533 | ret = ABIT_UGURU_NC; |
534 | abituguru_detect_bank1_sensor_type_exit: | |
535 | /* Restore original settings, failing here is really BAD, it has been | |
536 | reported that some BIOS-es hang when entering the uGuru menu with | |
537 | invalid settings present in the uGuru, so we try this 3 times. */ | |
538 | for (i = 0; i < 3; i++) | |
539 | if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, | |
540 | sensor_addr, data->bank1_settings[sensor_addr], | |
541 | 3) == 3) | |
542 | break; | |
543 | if (i == 3) { | |
28ebfa13 JP |
544 | pr_err("Fatal error could not restore original settings. %s %s\n", |
545 | never_happen, report_this); | |
a2392e0b | 546 | return -ENODEV; |
faf9b616 | 547 | } |
f2b84bbc HG |
548 | return ret; |
549 | } | |
550 | ||
551 | /* These functions try to find out how many sensors there are in bank2 and how | |
552 | many pwms there are. The purpose of this is to make sure that we don't give | |
553 | the user the possibility to change settings for non-existent sensors / pwm. | |
554 | The uGuru will happily read / write whatever memory happens to be after the | |
555 | memory storing the PWM settings when reading/writing to a PWM which is not | |
556 | there. Notice even if we detect a PWM which doesn't exist we normally won't | |
557 | write to it, unless the user tries to change the settings. | |
558 | ||
559 | Although the uGuru allows reading (settings) from non existing bank2 | |
560 | sensors, my version of the uGuru does seem to stop writing to them, the | |
561 | write function above aborts in this case with: | |
562 | "CMD reg does not hold 0xAC after write" | |
563 | ||
564 | Notice these 2 tests are non destructive iow read-only tests, otherwise | |
565 | they would defeat their purpose. Although for the bank2_sensors detection a | |
566 | read/write test would be feasible because of the reaction above, I've | |
567 | however opted to stay on the safe side. */ | |
568 | static void __devinit | |
569 | abituguru_detect_no_bank2_sensors(struct abituguru_data *data) | |
570 | { | |
571 | int i; | |
572 | ||
9b2ad129 | 573 | if (fan_sensors > 0 && fan_sensors <= ABIT_UGURU_MAX_BANK2_SENSORS) { |
f2b84bbc HG |
574 | data->bank2_sensors = fan_sensors; |
575 | ABIT_UGURU_DEBUG(2, "assuming %d fan sensors because of " | |
576 | "\"fan_sensors\" module param\n", | |
577 | (int)data->bank2_sensors); | |
578 | return; | |
579 | } | |
580 | ||
581 | ABIT_UGURU_DEBUG(2, "detecting number of fan sensors\n"); | |
582 | for (i = 0; i < ABIT_UGURU_MAX_BANK2_SENSORS; i++) { | |
583 | /* 0x89 are the known used bits: | |
584 | -0x80 enable shutdown | |
585 | -0x08 enable beep | |
586 | -0x01 enable alarm | |
587 | All other bits should be 0, but on some motherboards | |
b7c06604 HG |
588 | 0x40 (bit 6) is also high for some of the fans?? */ |
589 | if (data->bank2_settings[i][0] & ~0xC9) { | |
f2b84bbc HG |
590 | ABIT_UGURU_DEBUG(2, " bank2 sensor %d does not seem " |
591 | "to be a fan sensor: settings[0] = %02X\n", | |
592 | i, (unsigned int)data->bank2_settings[i][0]); | |
593 | break; | |
594 | } | |
595 | ||
596 | /* check if the threshold is within the allowed range */ | |
597 | if (data->bank2_settings[i][1] < | |
598 | abituguru_bank2_min_threshold) { | |
599 | ABIT_UGURU_DEBUG(2, " bank2 sensor %d does not seem " | |
600 | "to be a fan sensor: the threshold (%d) is " | |
601 | "below the minimum (%d)\n", i, | |
602 | (int)data->bank2_settings[i][1], | |
603 | (int)abituguru_bank2_min_threshold); | |
604 | break; | |
605 | } | |
606 | if (data->bank2_settings[i][1] > | |
607 | abituguru_bank2_max_threshold) { | |
608 | ABIT_UGURU_DEBUG(2, " bank2 sensor %d does not seem " | |
609 | "to be a fan sensor: the threshold (%d) is " | |
610 | "above the maximum (%d)\n", i, | |
611 | (int)data->bank2_settings[i][1], | |
612 | (int)abituguru_bank2_max_threshold); | |
613 | break; | |
614 | } | |
615 | } | |
616 | ||
617 | data->bank2_sensors = i; | |
618 | ABIT_UGURU_DEBUG(2, " found: %d fan sensors\n", | |
619 | (int)data->bank2_sensors); | |
620 | } | |
621 | ||
622 | static void __devinit | |
623 | abituguru_detect_no_pwms(struct abituguru_data *data) | |
624 | { | |
625 | int i, j; | |
626 | ||
9b2ad129 | 627 | if (pwms > 0 && pwms <= ABIT_UGURU_MAX_PWMS) { |
f2b84bbc HG |
628 | data->pwms = pwms; |
629 | ABIT_UGURU_DEBUG(2, "assuming %d PWM outputs because of " | |
630 | "\"pwms\" module param\n", (int)data->pwms); | |
631 | return; | |
632 | } | |
633 | ||
634 | ABIT_UGURU_DEBUG(2, "detecting number of PWM outputs\n"); | |
635 | for (i = 0; i < ABIT_UGURU_MAX_PWMS; i++) { | |
636 | /* 0x80 is the enable bit and the low | |
637 | nibble is which temp sensor to use, | |
638 | the other bits should be 0 */ | |
639 | if (data->pwm_settings[i][0] & ~0x8F) { | |
640 | ABIT_UGURU_DEBUG(2, " pwm channel %d does not seem " | |
641 | "to be a pwm channel: settings[0] = %02X\n", | |
642 | i, (unsigned int)data->pwm_settings[i][0]); | |
643 | break; | |
644 | } | |
645 | ||
646 | /* the low nibble must correspond to one of the temp sensors | |
647 | we've found */ | |
648 | for (j = 0; j < data->bank1_sensors[ABIT_UGURU_TEMP_SENSOR]; | |
649 | j++) { | |
650 | if (data->bank1_address[ABIT_UGURU_TEMP_SENSOR][j] == | |
651 | (data->pwm_settings[i][0] & 0x0F)) | |
652 | break; | |
653 | } | |
654 | if (j == data->bank1_sensors[ABIT_UGURU_TEMP_SENSOR]) { | |
655 | ABIT_UGURU_DEBUG(2, " pwm channel %d does not seem " | |
656 | "to be a pwm channel: %d is not a valid temp " | |
657 | "sensor address\n", i, | |
658 | data->pwm_settings[i][0] & 0x0F); | |
659 | break; | |
660 | } | |
661 | ||
662 | /* check if all other settings are within the allowed range */ | |
663 | for (j = 1; j < 5; j++) { | |
664 | u8 min; | |
665 | /* special case pwm1 min pwm% */ | |
666 | if ((i == 0) && ((j == 1) || (j == 2))) | |
667 | min = 77; | |
668 | else | |
669 | min = abituguru_pwm_min[j]; | |
670 | if (data->pwm_settings[i][j] < min) { | |
671 | ABIT_UGURU_DEBUG(2, " pwm channel %d does " | |
672 | "not seem to be a pwm channel: " | |
673 | "setting %d (%d) is below the minimum " | |
674 | "value (%d)\n", i, j, | |
675 | (int)data->pwm_settings[i][j], | |
676 | (int)min); | |
677 | goto abituguru_detect_no_pwms_exit; | |
678 | } | |
679 | if (data->pwm_settings[i][j] > abituguru_pwm_max[j]) { | |
680 | ABIT_UGURU_DEBUG(2, " pwm channel %d does " | |
681 | "not seem to be a pwm channel: " | |
682 | "setting %d (%d) is above the maximum " | |
683 | "value (%d)\n", i, j, | |
684 | (int)data->pwm_settings[i][j], | |
685 | (int)abituguru_pwm_max[j]); | |
686 | goto abituguru_detect_no_pwms_exit; | |
687 | } | |
688 | } | |
689 | ||
690 | /* check that min temp < max temp and min pwm < max pwm */ | |
691 | if (data->pwm_settings[i][1] >= data->pwm_settings[i][2]) { | |
692 | ABIT_UGURU_DEBUG(2, " pwm channel %d does not seem " | |
693 | "to be a pwm channel: min pwm (%d) >= " | |
694 | "max pwm (%d)\n", i, | |
695 | (int)data->pwm_settings[i][1], | |
696 | (int)data->pwm_settings[i][2]); | |
697 | break; | |
698 | } | |
699 | if (data->pwm_settings[i][3] >= data->pwm_settings[i][4]) { | |
700 | ABIT_UGURU_DEBUG(2, " pwm channel %d does not seem " | |
701 | "to be a pwm channel: min temp (%d) >= " | |
702 | "max temp (%d)\n", i, | |
703 | (int)data->pwm_settings[i][3], | |
704 | (int)data->pwm_settings[i][4]); | |
705 | break; | |
706 | } | |
707 | } | |
708 | ||
709 | abituguru_detect_no_pwms_exit: | |
710 | data->pwms = i; | |
711 | ABIT_UGURU_DEBUG(2, " found: %d PWM outputs\n", (int)data->pwms); | |
712 | } | |
713 | ||
714 | /* Following are the sysfs callback functions. These functions expect: | |
715 | sensor_device_attribute_2->index: sensor address/offset in the bank | |
716 | sensor_device_attribute_2->nr: register offset, bitmask or NA. */ | |
717 | static struct abituguru_data *abituguru_update_device(struct device *dev); | |
718 | ||
719 | static ssize_t show_bank1_value(struct device *dev, | |
720 | struct device_attribute *devattr, char *buf) | |
721 | { | |
722 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
723 | struct abituguru_data *data = abituguru_update_device(dev); | |
724 | if (!data) | |
725 | return -EIO; | |
726 | return sprintf(buf, "%d\n", (data->bank1_value[attr->index] * | |
727 | data->bank1_max_value[attr->index] + 128) / 255); | |
728 | } | |
729 | ||
730 | static ssize_t show_bank1_setting(struct device *dev, | |
731 | struct device_attribute *devattr, char *buf) | |
732 | { | |
733 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
734 | struct abituguru_data *data = dev_get_drvdata(dev); | |
735 | return sprintf(buf, "%d\n", | |
736 | (data->bank1_settings[attr->index][attr->nr] * | |
737 | data->bank1_max_value[attr->index] + 128) / 255); | |
738 | } | |
739 | ||
740 | static ssize_t show_bank2_value(struct device *dev, | |
741 | struct device_attribute *devattr, char *buf) | |
742 | { | |
743 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
744 | struct abituguru_data *data = abituguru_update_device(dev); | |
745 | if (!data) | |
746 | return -EIO; | |
747 | return sprintf(buf, "%d\n", (data->bank2_value[attr->index] * | |
748 | ABIT_UGURU_FAN_MAX + 128) / 255); | |
749 | } | |
750 | ||
751 | static ssize_t show_bank2_setting(struct device *dev, | |
752 | struct device_attribute *devattr, char *buf) | |
753 | { | |
754 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
755 | struct abituguru_data *data = dev_get_drvdata(dev); | |
756 | return sprintf(buf, "%d\n", | |
757 | (data->bank2_settings[attr->index][attr->nr] * | |
758 | ABIT_UGURU_FAN_MAX + 128) / 255); | |
759 | } | |
760 | ||
761 | static ssize_t store_bank1_setting(struct device *dev, struct device_attribute | |
762 | *devattr, const char *buf, size_t count) | |
763 | { | |
764 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
765 | struct abituguru_data *data = dev_get_drvdata(dev); | |
766 | u8 val = (simple_strtoul(buf, NULL, 10) * 255 + | |
767 | data->bank1_max_value[attr->index]/2) / | |
768 | data->bank1_max_value[attr->index]; | |
769 | ssize_t ret = count; | |
770 | ||
771 | mutex_lock(&data->update_lock); | |
772 | if (data->bank1_settings[attr->index][attr->nr] != val) { | |
773 | u8 orig_val = data->bank1_settings[attr->index][attr->nr]; | |
774 | data->bank1_settings[attr->index][attr->nr] = val; | |
775 | if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, | |
776 | attr->index, data->bank1_settings[attr->index], | |
777 | 3) <= attr->nr) { | |
778 | data->bank1_settings[attr->index][attr->nr] = orig_val; | |
779 | ret = -EIO; | |
780 | } | |
781 | } | |
782 | mutex_unlock(&data->update_lock); | |
783 | return ret; | |
784 | } | |
785 | ||
786 | static ssize_t store_bank2_setting(struct device *dev, struct device_attribute | |
787 | *devattr, const char *buf, size_t count) | |
788 | { | |
789 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
790 | struct abituguru_data *data = dev_get_drvdata(dev); | |
791 | u8 val = (simple_strtoul(buf, NULL, 10)*255 + ABIT_UGURU_FAN_MAX/2) / | |
792 | ABIT_UGURU_FAN_MAX; | |
793 | ssize_t ret = count; | |
794 | ||
795 | /* this check can be done before taking the lock */ | |
796 | if ((val < abituguru_bank2_min_threshold) || | |
797 | (val > abituguru_bank2_max_threshold)) | |
798 | return -EINVAL; | |
799 | ||
800 | mutex_lock(&data->update_lock); | |
801 | if (data->bank2_settings[attr->index][attr->nr] != val) { | |
802 | u8 orig_val = data->bank2_settings[attr->index][attr->nr]; | |
803 | data->bank2_settings[attr->index][attr->nr] = val; | |
804 | if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK2 + 2, | |
805 | attr->index, data->bank2_settings[attr->index], | |
806 | 2) <= attr->nr) { | |
807 | data->bank2_settings[attr->index][attr->nr] = orig_val; | |
808 | ret = -EIO; | |
809 | } | |
810 | } | |
811 | mutex_unlock(&data->update_lock); | |
812 | return ret; | |
813 | } | |
814 | ||
815 | static ssize_t show_bank1_alarm(struct device *dev, | |
816 | struct device_attribute *devattr, char *buf) | |
817 | { | |
818 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
819 | struct abituguru_data *data = abituguru_update_device(dev); | |
820 | if (!data) | |
821 | return -EIO; | |
822 | /* See if the alarm bit for this sensor is set, and if the | |
823 | alarm matches the type of alarm we're looking for (for volt | |
824 | it can be either low or high). The type is stored in a few | |
825 | readonly bits in the settings part of the relevant sensor. | |
826 | The bitmask of the type is passed to us in attr->nr. */ | |
827 | if ((data->alarms[attr->index / 8] & (0x01 << (attr->index % 8))) && | |
828 | (data->bank1_settings[attr->index][0] & attr->nr)) | |
829 | return sprintf(buf, "1\n"); | |
830 | else | |
831 | return sprintf(buf, "0\n"); | |
832 | } | |
833 | ||
834 | static ssize_t show_bank2_alarm(struct device *dev, | |
835 | struct device_attribute *devattr, char *buf) | |
836 | { | |
837 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
838 | struct abituguru_data *data = abituguru_update_device(dev); | |
839 | if (!data) | |
840 | return -EIO; | |
841 | if (data->alarms[2] & (0x01 << attr->index)) | |
842 | return sprintf(buf, "1\n"); | |
843 | else | |
844 | return sprintf(buf, "0\n"); | |
845 | } | |
846 | ||
847 | static ssize_t show_bank1_mask(struct device *dev, | |
848 | struct device_attribute *devattr, char *buf) | |
849 | { | |
850 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
851 | struct abituguru_data *data = dev_get_drvdata(dev); | |
852 | if (data->bank1_settings[attr->index][0] & attr->nr) | |
853 | return sprintf(buf, "1\n"); | |
854 | else | |
855 | return sprintf(buf, "0\n"); | |
856 | } | |
857 | ||
858 | static ssize_t show_bank2_mask(struct device *dev, | |
859 | struct device_attribute *devattr, char *buf) | |
860 | { | |
861 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
862 | struct abituguru_data *data = dev_get_drvdata(dev); | |
863 | if (data->bank2_settings[attr->index][0] & attr->nr) | |
864 | return sprintf(buf, "1\n"); | |
865 | else | |
866 | return sprintf(buf, "0\n"); | |
867 | } | |
868 | ||
869 | static ssize_t store_bank1_mask(struct device *dev, | |
870 | struct device_attribute *devattr, const char *buf, size_t count) | |
871 | { | |
872 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
873 | struct abituguru_data *data = dev_get_drvdata(dev); | |
874 | int mask = simple_strtoul(buf, NULL, 10); | |
875 | ssize_t ret = count; | |
876 | u8 orig_val; | |
877 | ||
878 | mutex_lock(&data->update_lock); | |
879 | orig_val = data->bank1_settings[attr->index][0]; | |
880 | ||
881 | if (mask) | |
882 | data->bank1_settings[attr->index][0] |= attr->nr; | |
883 | else | |
884 | data->bank1_settings[attr->index][0] &= ~attr->nr; | |
885 | ||
886 | if ((data->bank1_settings[attr->index][0] != orig_val) && | |
887 | (abituguru_write(data, | |
888 | ABIT_UGURU_SENSOR_BANK1 + 2, attr->index, | |
889 | data->bank1_settings[attr->index], 3) < 1)) { | |
890 | data->bank1_settings[attr->index][0] = orig_val; | |
891 | ret = -EIO; | |
892 | } | |
893 | mutex_unlock(&data->update_lock); | |
894 | return ret; | |
895 | } | |
896 | ||
897 | static ssize_t store_bank2_mask(struct device *dev, | |
898 | struct device_attribute *devattr, const char *buf, size_t count) | |
899 | { | |
900 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
901 | struct abituguru_data *data = dev_get_drvdata(dev); | |
902 | int mask = simple_strtoul(buf, NULL, 10); | |
903 | ssize_t ret = count; | |
904 | u8 orig_val; | |
905 | ||
906 | mutex_lock(&data->update_lock); | |
907 | orig_val = data->bank2_settings[attr->index][0]; | |
908 | ||
909 | if (mask) | |
910 | data->bank2_settings[attr->index][0] |= attr->nr; | |
911 | else | |
912 | data->bank2_settings[attr->index][0] &= ~attr->nr; | |
913 | ||
914 | if ((data->bank2_settings[attr->index][0] != orig_val) && | |
915 | (abituguru_write(data, | |
916 | ABIT_UGURU_SENSOR_BANK2 + 2, attr->index, | |
917 | data->bank2_settings[attr->index], 2) < 1)) { | |
918 | data->bank2_settings[attr->index][0] = orig_val; | |
919 | ret = -EIO; | |
920 | } | |
921 | mutex_unlock(&data->update_lock); | |
922 | return ret; | |
923 | } | |
924 | ||
925 | /* Fan PWM (speed control) */ | |
926 | static ssize_t show_pwm_setting(struct device *dev, | |
927 | struct device_attribute *devattr, char *buf) | |
928 | { | |
929 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
930 | struct abituguru_data *data = dev_get_drvdata(dev); | |
931 | return sprintf(buf, "%d\n", data->pwm_settings[attr->index][attr->nr] * | |
932 | abituguru_pwm_settings_multiplier[attr->nr]); | |
933 | } | |
934 | ||
935 | static ssize_t store_pwm_setting(struct device *dev, struct device_attribute | |
936 | *devattr, const char *buf, size_t count) | |
937 | { | |
938 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
939 | struct abituguru_data *data = dev_get_drvdata(dev); | |
940 | u8 min, val = (simple_strtoul(buf, NULL, 10) + | |
941 | abituguru_pwm_settings_multiplier[attr->nr]/2) / | |
942 | abituguru_pwm_settings_multiplier[attr->nr]; | |
943 | ssize_t ret = count; | |
944 | ||
945 | /* special case pwm1 min pwm% */ | |
946 | if ((attr->index == 0) && ((attr->nr == 1) || (attr->nr == 2))) | |
947 | min = 77; | |
948 | else | |
949 | min = abituguru_pwm_min[attr->nr]; | |
950 | ||
951 | /* this check can be done before taking the lock */ | |
952 | if ((val < min) || (val > abituguru_pwm_max[attr->nr])) | |
953 | return -EINVAL; | |
954 | ||
955 | mutex_lock(&data->update_lock); | |
956 | /* this check needs to be done after taking the lock */ | |
957 | if ((attr->nr & 1) && | |
958 | (val >= data->pwm_settings[attr->index][attr->nr + 1])) | |
959 | ret = -EINVAL; | |
960 | else if (!(attr->nr & 1) && | |
961 | (val <= data->pwm_settings[attr->index][attr->nr - 1])) | |
962 | ret = -EINVAL; | |
963 | else if (data->pwm_settings[attr->index][attr->nr] != val) { | |
964 | u8 orig_val = data->pwm_settings[attr->index][attr->nr]; | |
965 | data->pwm_settings[attr->index][attr->nr] = val; | |
966 | if (abituguru_write(data, ABIT_UGURU_FAN_PWM + 1, | |
967 | attr->index, data->pwm_settings[attr->index], | |
968 | 5) <= attr->nr) { | |
969 | data->pwm_settings[attr->index][attr->nr] = | |
970 | orig_val; | |
971 | ret = -EIO; | |
972 | } | |
973 | } | |
974 | mutex_unlock(&data->update_lock); | |
975 | return ret; | |
976 | } | |
977 | ||
978 | static ssize_t show_pwm_sensor(struct device *dev, | |
979 | struct device_attribute *devattr, char *buf) | |
980 | { | |
981 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
982 | struct abituguru_data *data = dev_get_drvdata(dev); | |
983 | int i; | |
984 | /* We need to walk to the temp sensor addresses to find what | |
985 | the userspace id of the configured temp sensor is. */ | |
986 | for (i = 0; i < data->bank1_sensors[ABIT_UGURU_TEMP_SENSOR]; i++) | |
987 | if (data->bank1_address[ABIT_UGURU_TEMP_SENSOR][i] == | |
988 | (data->pwm_settings[attr->index][0] & 0x0F)) | |
989 | return sprintf(buf, "%d\n", i+1); | |
990 | ||
991 | return -ENXIO; | |
992 | } | |
993 | ||
994 | static ssize_t store_pwm_sensor(struct device *dev, struct device_attribute | |
995 | *devattr, const char *buf, size_t count) | |
996 | { | |
997 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
998 | struct abituguru_data *data = dev_get_drvdata(dev); | |
999 | unsigned long val = simple_strtoul(buf, NULL, 10) - 1; | |
1000 | ssize_t ret = count; | |
1001 | ||
1002 | mutex_lock(&data->update_lock); | |
1003 | if (val < data->bank1_sensors[ABIT_UGURU_TEMP_SENSOR]) { | |
1004 | u8 orig_val = data->pwm_settings[attr->index][0]; | |
1005 | u8 address = data->bank1_address[ABIT_UGURU_TEMP_SENSOR][val]; | |
1006 | data->pwm_settings[attr->index][0] &= 0xF0; | |
1007 | data->pwm_settings[attr->index][0] |= address; | |
1008 | if (data->pwm_settings[attr->index][0] != orig_val) { | |
1009 | if (abituguru_write(data, ABIT_UGURU_FAN_PWM + 1, | |
1010 | attr->index, | |
1011 | data->pwm_settings[attr->index], | |
1012 | 5) < 1) { | |
1013 | data->pwm_settings[attr->index][0] = orig_val; | |
1014 | ret = -EIO; | |
1015 | } | |
1016 | } | |
1017 | } | |
1018 | else | |
1019 | ret = -EINVAL; | |
1020 | mutex_unlock(&data->update_lock); | |
1021 | return ret; | |
1022 | } | |
1023 | ||
1024 | static ssize_t show_pwm_enable(struct device *dev, | |
1025 | struct device_attribute *devattr, char *buf) | |
1026 | { | |
1027 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
1028 | struct abituguru_data *data = dev_get_drvdata(dev); | |
1029 | int res = 0; | |
1030 | if (data->pwm_settings[attr->index][0] & ABIT_UGURU_FAN_PWM_ENABLE) | |
1031 | res = 2; | |
1032 | return sprintf(buf, "%d\n", res); | |
1033 | } | |
1034 | ||
1035 | static ssize_t store_pwm_enable(struct device *dev, struct device_attribute | |
1036 | *devattr, const char *buf, size_t count) | |
1037 | { | |
1038 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
1039 | struct abituguru_data *data = dev_get_drvdata(dev); | |
1040 | u8 orig_val, user_val = simple_strtoul(buf, NULL, 10); | |
1041 | ssize_t ret = count; | |
1042 | ||
1043 | mutex_lock(&data->update_lock); | |
1044 | orig_val = data->pwm_settings[attr->index][0]; | |
1045 | switch (user_val) { | |
1046 | case 0: | |
1047 | data->pwm_settings[attr->index][0] &= | |
1048 | ~ABIT_UGURU_FAN_PWM_ENABLE; | |
1049 | break; | |
1050 | case 2: | |
1051 | data->pwm_settings[attr->index][0] |= | |
1052 | ABIT_UGURU_FAN_PWM_ENABLE; | |
1053 | break; | |
1054 | default: | |
1055 | ret = -EINVAL; | |
1056 | } | |
1057 | if ((data->pwm_settings[attr->index][0] != orig_val) && | |
1058 | (abituguru_write(data, ABIT_UGURU_FAN_PWM + 1, | |
1059 | attr->index, data->pwm_settings[attr->index], | |
1060 | 5) < 1)) { | |
1061 | data->pwm_settings[attr->index][0] = orig_val; | |
1062 | ret = -EIO; | |
1063 | } | |
1064 | mutex_unlock(&data->update_lock); | |
1065 | return ret; | |
1066 | } | |
1067 | ||
1068 | static ssize_t show_name(struct device *dev, | |
1069 | struct device_attribute *devattr, char *buf) | |
1070 | { | |
1071 | return sprintf(buf, "%s\n", ABIT_UGURU_NAME); | |
1072 | } | |
1073 | ||
1074 | /* Sysfs attr templates, the real entries are generated automatically. */ | |
1075 | static const | |
1076 | struct sensor_device_attribute_2 abituguru_sysfs_bank1_templ[2][9] = { | |
1077 | { | |
1078 | SENSOR_ATTR_2(in%d_input, 0444, show_bank1_value, NULL, 0, 0), | |
1079 | SENSOR_ATTR_2(in%d_min, 0644, show_bank1_setting, | |
1080 | store_bank1_setting, 1, 0), | |
1081 | SENSOR_ATTR_2(in%d_min_alarm, 0444, show_bank1_alarm, NULL, | |
1082 | ABIT_UGURU_VOLT_LOW_ALARM_FLAG, 0), | |
1083 | SENSOR_ATTR_2(in%d_max, 0644, show_bank1_setting, | |
1084 | store_bank1_setting, 2, 0), | |
1085 | SENSOR_ATTR_2(in%d_max_alarm, 0444, show_bank1_alarm, NULL, | |
1086 | ABIT_UGURU_VOLT_HIGH_ALARM_FLAG, 0), | |
1087 | SENSOR_ATTR_2(in%d_beep, 0644, show_bank1_mask, | |
1088 | store_bank1_mask, ABIT_UGURU_BEEP_ENABLE, 0), | |
1089 | SENSOR_ATTR_2(in%d_shutdown, 0644, show_bank1_mask, | |
1090 | store_bank1_mask, ABIT_UGURU_SHUTDOWN_ENABLE, 0), | |
1091 | SENSOR_ATTR_2(in%d_min_alarm_enable, 0644, show_bank1_mask, | |
1092 | store_bank1_mask, ABIT_UGURU_VOLT_LOW_ALARM_ENABLE, 0), | |
1093 | SENSOR_ATTR_2(in%d_max_alarm_enable, 0644, show_bank1_mask, | |
1094 | store_bank1_mask, ABIT_UGURU_VOLT_HIGH_ALARM_ENABLE, 0), | |
1095 | }, { | |
1096 | SENSOR_ATTR_2(temp%d_input, 0444, show_bank1_value, NULL, 0, 0), | |
1097 | SENSOR_ATTR_2(temp%d_alarm, 0444, show_bank1_alarm, NULL, | |
1098 | ABIT_UGURU_TEMP_HIGH_ALARM_FLAG, 0), | |
1099 | SENSOR_ATTR_2(temp%d_max, 0644, show_bank1_setting, | |
1100 | store_bank1_setting, 1, 0), | |
1101 | SENSOR_ATTR_2(temp%d_crit, 0644, show_bank1_setting, | |
1102 | store_bank1_setting, 2, 0), | |
1103 | SENSOR_ATTR_2(temp%d_beep, 0644, show_bank1_mask, | |
1104 | store_bank1_mask, ABIT_UGURU_BEEP_ENABLE, 0), | |
1105 | SENSOR_ATTR_2(temp%d_shutdown, 0644, show_bank1_mask, | |
1106 | store_bank1_mask, ABIT_UGURU_SHUTDOWN_ENABLE, 0), | |
1107 | SENSOR_ATTR_2(temp%d_alarm_enable, 0644, show_bank1_mask, | |
1108 | store_bank1_mask, ABIT_UGURU_TEMP_HIGH_ALARM_ENABLE, 0), | |
1109 | } | |
1110 | }; | |
1111 | ||
1112 | static const struct sensor_device_attribute_2 abituguru_sysfs_fan_templ[6] = { | |
1113 | SENSOR_ATTR_2(fan%d_input, 0444, show_bank2_value, NULL, 0, 0), | |
1114 | SENSOR_ATTR_2(fan%d_alarm, 0444, show_bank2_alarm, NULL, 0, 0), | |
1115 | SENSOR_ATTR_2(fan%d_min, 0644, show_bank2_setting, | |
1116 | store_bank2_setting, 1, 0), | |
1117 | SENSOR_ATTR_2(fan%d_beep, 0644, show_bank2_mask, | |
1118 | store_bank2_mask, ABIT_UGURU_BEEP_ENABLE, 0), | |
1119 | SENSOR_ATTR_2(fan%d_shutdown, 0644, show_bank2_mask, | |
1120 | store_bank2_mask, ABIT_UGURU_SHUTDOWN_ENABLE, 0), | |
1121 | SENSOR_ATTR_2(fan%d_alarm_enable, 0644, show_bank2_mask, | |
1122 | store_bank2_mask, ABIT_UGURU_FAN_LOW_ALARM_ENABLE, 0), | |
1123 | }; | |
1124 | ||
1125 | static const struct sensor_device_attribute_2 abituguru_sysfs_pwm_templ[6] = { | |
1126 | SENSOR_ATTR_2(pwm%d_enable, 0644, show_pwm_enable, | |
1127 | store_pwm_enable, 0, 0), | |
1128 | SENSOR_ATTR_2(pwm%d_auto_channels_temp, 0644, show_pwm_sensor, | |
1129 | store_pwm_sensor, 0, 0), | |
1130 | SENSOR_ATTR_2(pwm%d_auto_point1_pwm, 0644, show_pwm_setting, | |
1131 | store_pwm_setting, 1, 0), | |
1132 | SENSOR_ATTR_2(pwm%d_auto_point2_pwm, 0644, show_pwm_setting, | |
1133 | store_pwm_setting, 2, 0), | |
1134 | SENSOR_ATTR_2(pwm%d_auto_point1_temp, 0644, show_pwm_setting, | |
1135 | store_pwm_setting, 3, 0), | |
1136 | SENSOR_ATTR_2(pwm%d_auto_point2_temp, 0644, show_pwm_setting, | |
1137 | store_pwm_setting, 4, 0), | |
1138 | }; | |
1139 | ||
a2392e0b | 1140 | static struct sensor_device_attribute_2 abituguru_sysfs_attr[] = { |
f2b84bbc HG |
1141 | SENSOR_ATTR_2(name, 0444, show_name, NULL, 0, 0), |
1142 | }; | |
1143 | ||
1144 | static int __devinit abituguru_probe(struct platform_device *pdev) | |
1145 | { | |
1146 | struct abituguru_data *data; | |
a2392e0b | 1147 | int i, j, used, sysfs_names_free, sysfs_attr_i, res = -ENODEV; |
f2b84bbc | 1148 | char *sysfs_filename; |
f2b84bbc HG |
1149 | |
1150 | /* El weirdo probe order, to keep the sysfs order identical to the | |
1151 | BIOS and window-appliction listing order. */ | |
a2392e0b HG |
1152 | const u8 probe_order[ABIT_UGURU_MAX_BANK1_SENSORS] = { |
1153 | 0x00, 0x01, 0x03, 0x04, 0x0A, 0x08, 0x0E, 0x02, | |
1154 | 0x09, 0x06, 0x05, 0x0B, 0x0F, 0x0D, 0x07, 0x0C }; | |
f2b84bbc HG |
1155 | |
1156 | if (!(data = kzalloc(sizeof(struct abituguru_data), GFP_KERNEL))) | |
1157 | return -ENOMEM; | |
1158 | ||
1159 | data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start; | |
1160 | mutex_init(&data->update_lock); | |
1161 | platform_set_drvdata(pdev, data); | |
1162 | ||
1163 | /* See if the uGuru is ready */ | |
1164 | if (inb_p(data->addr + ABIT_UGURU_DATA) == ABIT_UGURU_STATUS_INPUT) | |
1165 | data->uguru_ready = 1; | |
1166 | ||
1167 | /* Completely read the uGuru this has 2 purposes: | |
1168 | - testread / see if one really is there. | |
1169 | - make an in memory copy of all the uguru settings for future use. */ | |
1170 | if (abituguru_read(data, ABIT_UGURU_ALARM_BANK, 0, | |
a2392e0b HG |
1171 | data->alarms, 3, ABIT_UGURU_MAX_RETRIES) != 3) |
1172 | goto abituguru_probe_error; | |
f2b84bbc | 1173 | |
a2392e0b | 1174 | for (i = 0; i < ABIT_UGURU_MAX_BANK1_SENSORS; i++) { |
f2b84bbc HG |
1175 | if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1, i, |
1176 | &data->bank1_value[i], 1, | |
a2392e0b HG |
1177 | ABIT_UGURU_MAX_RETRIES) != 1) |
1178 | goto abituguru_probe_error; | |
f2b84bbc HG |
1179 | if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1+1, i, |
1180 | data->bank1_settings[i], 3, | |
a2392e0b HG |
1181 | ABIT_UGURU_MAX_RETRIES) != 3) |
1182 | goto abituguru_probe_error; | |
f2b84bbc HG |
1183 | } |
1184 | /* Note: We don't know how many bank2 sensors / pwms there really are, | |
1185 | but in order to "detect" this we need to read the maximum amount | |
1186 | anyways. If we read sensors/pwms not there we'll just read crap | |
1187 | this can't hurt. We need the detection because we don't want | |
1188 | unwanted writes, which will hurt! */ | |
1189 | for (i = 0; i < ABIT_UGURU_MAX_BANK2_SENSORS; i++) { | |
1190 | if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK2, i, | |
1191 | &data->bank2_value[i], 1, | |
a2392e0b HG |
1192 | ABIT_UGURU_MAX_RETRIES) != 1) |
1193 | goto abituguru_probe_error; | |
f2b84bbc HG |
1194 | if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK2+1, i, |
1195 | data->bank2_settings[i], 2, | |
a2392e0b HG |
1196 | ABIT_UGURU_MAX_RETRIES) != 2) |
1197 | goto abituguru_probe_error; | |
f2b84bbc HG |
1198 | } |
1199 | for (i = 0; i < ABIT_UGURU_MAX_PWMS; i++) { | |
1200 | if (abituguru_read(data, ABIT_UGURU_FAN_PWM, i, | |
1201 | data->pwm_settings[i], 5, | |
a2392e0b HG |
1202 | ABIT_UGURU_MAX_RETRIES) != 5) |
1203 | goto abituguru_probe_error; | |
f2b84bbc HG |
1204 | } |
1205 | data->last_updated = jiffies; | |
1206 | ||
1207 | /* Detect sensor types and fill the sysfs attr for bank1 */ | |
a2392e0b HG |
1208 | sysfs_attr_i = 0; |
1209 | sysfs_filename = data->sysfs_names; | |
1210 | sysfs_names_free = ABITUGURU_SYSFS_NAMES_LENGTH; | |
1211 | for (i = 0; i < ABIT_UGURU_MAX_BANK1_SENSORS; i++) { | |
f2b84bbc | 1212 | res = abituguru_detect_bank1_sensor_type(data, probe_order[i]); |
a2392e0b HG |
1213 | if (res < 0) |
1214 | goto abituguru_probe_error; | |
f2b84bbc HG |
1215 | if (res == ABIT_UGURU_NC) |
1216 | continue; | |
1217 | ||
a2392e0b | 1218 | /* res 1 (temp) sensors have 7 sysfs entries, 0 (in) 9 */ |
f2b84bbc | 1219 | for (j = 0; j < (res ? 7 : 9); j++) { |
a2392e0b HG |
1220 | used = snprintf(sysfs_filename, sysfs_names_free, |
1221 | abituguru_sysfs_bank1_templ[res][j].dev_attr. | |
1222 | attr.name, data->bank1_sensors[res] + res) | |
1223 | + 1; | |
f2b84bbc HG |
1224 | data->sysfs_attr[sysfs_attr_i] = |
1225 | abituguru_sysfs_bank1_templ[res][j]; | |
1226 | data->sysfs_attr[sysfs_attr_i].dev_attr.attr.name = | |
1227 | sysfs_filename; | |
f2b84bbc | 1228 | data->sysfs_attr[sysfs_attr_i].index = probe_order[i]; |
a2392e0b HG |
1229 | sysfs_filename += used; |
1230 | sysfs_names_free -= used; | |
f2b84bbc HG |
1231 | sysfs_attr_i++; |
1232 | } | |
1233 | data->bank1_max_value[probe_order[i]] = | |
1234 | abituguru_bank1_max_value[res]; | |
1235 | data->bank1_address[res][data->bank1_sensors[res]] = | |
1236 | probe_order[i]; | |
1237 | data->bank1_sensors[res]++; | |
1238 | } | |
1239 | /* Detect number of sensors and fill the sysfs attr for bank2 (fans) */ | |
1240 | abituguru_detect_no_bank2_sensors(data); | |
1241 | for (i = 0; i < data->bank2_sensors; i++) { | |
a2392e0b HG |
1242 | for (j = 0; j < ARRAY_SIZE(abituguru_sysfs_fan_templ); j++) { |
1243 | used = snprintf(sysfs_filename, sysfs_names_free, | |
1244 | abituguru_sysfs_fan_templ[j].dev_attr.attr.name, | |
1245 | i + 1) + 1; | |
f2b84bbc HG |
1246 | data->sysfs_attr[sysfs_attr_i] = |
1247 | abituguru_sysfs_fan_templ[j]; | |
1248 | data->sysfs_attr[sysfs_attr_i].dev_attr.attr.name = | |
1249 | sysfs_filename; | |
f2b84bbc | 1250 | data->sysfs_attr[sysfs_attr_i].index = i; |
a2392e0b HG |
1251 | sysfs_filename += used; |
1252 | sysfs_names_free -= used; | |
f2b84bbc HG |
1253 | sysfs_attr_i++; |
1254 | } | |
1255 | } | |
1256 | /* Detect number of sensors and fill the sysfs attr for pwms */ | |
1257 | abituguru_detect_no_pwms(data); | |
1258 | for (i = 0; i < data->pwms; i++) { | |
a2392e0b HG |
1259 | for (j = 0; j < ARRAY_SIZE(abituguru_sysfs_pwm_templ); j++) { |
1260 | used = snprintf(sysfs_filename, sysfs_names_free, | |
1261 | abituguru_sysfs_pwm_templ[j].dev_attr.attr.name, | |
1262 | i + 1) + 1; | |
f2b84bbc HG |
1263 | data->sysfs_attr[sysfs_attr_i] = |
1264 | abituguru_sysfs_pwm_templ[j]; | |
1265 | data->sysfs_attr[sysfs_attr_i].dev_attr.attr.name = | |
1266 | sysfs_filename; | |
f2b84bbc | 1267 | data->sysfs_attr[sysfs_attr_i].index = i; |
a2392e0b HG |
1268 | sysfs_filename += used; |
1269 | sysfs_names_free -= used; | |
f2b84bbc HG |
1270 | sysfs_attr_i++; |
1271 | } | |
1272 | } | |
a2392e0b HG |
1273 | /* Fail safe check, this should never happen! */ |
1274 | if (sysfs_names_free < 0) { | |
28ebfa13 JP |
1275 | pr_err("Fatal error ran out of space for sysfs attr names. %s %s", |
1276 | never_happen, report_this); | |
a2392e0b HG |
1277 | res = -ENAMETOOLONG; |
1278 | goto abituguru_probe_error; | |
f2b84bbc | 1279 | } |
28ebfa13 | 1280 | pr_info("found Abit uGuru\n"); |
f2b84bbc HG |
1281 | |
1282 | /* Register sysfs hooks */ | |
f2b84bbc | 1283 | for (i = 0; i < sysfs_attr_i; i++) |
bc8f0a26 HG |
1284 | if (device_create_file(&pdev->dev, |
1285 | &data->sysfs_attr[i].dev_attr)) | |
1286 | goto abituguru_probe_error; | |
a2392e0b | 1287 | for (i = 0; i < ARRAY_SIZE(abituguru_sysfs_attr); i++) |
bc8f0a26 HG |
1288 | if (device_create_file(&pdev->dev, |
1289 | &abituguru_sysfs_attr[i].dev_attr)) | |
1290 | goto abituguru_probe_error; | |
f2b84bbc | 1291 | |
1beeffe4 TJ |
1292 | data->hwmon_dev = hwmon_device_register(&pdev->dev); |
1293 | if (!IS_ERR(data->hwmon_dev)) | |
bc8f0a26 | 1294 | return 0; /* success */ |
a2392e0b | 1295 | |
1beeffe4 | 1296 | res = PTR_ERR(data->hwmon_dev); |
a2392e0b | 1297 | abituguru_probe_error: |
bc8f0a26 HG |
1298 | for (i = 0; data->sysfs_attr[i].dev_attr.attr.name; i++) |
1299 | device_remove_file(&pdev->dev, &data->sysfs_attr[i].dev_attr); | |
1300 | for (i = 0; i < ARRAY_SIZE(abituguru_sysfs_attr); i++) | |
1301 | device_remove_file(&pdev->dev, | |
1302 | &abituguru_sysfs_attr[i].dev_attr); | |
04a6217d | 1303 | platform_set_drvdata(pdev, NULL); |
a2392e0b HG |
1304 | kfree(data); |
1305 | return res; | |
f2b84bbc HG |
1306 | } |
1307 | ||
1308 | static int __devexit abituguru_remove(struct platform_device *pdev) | |
1309 | { | |
bc8f0a26 | 1310 | int i; |
f2b84bbc HG |
1311 | struct abituguru_data *data = platform_get_drvdata(pdev); |
1312 | ||
1beeffe4 | 1313 | hwmon_device_unregister(data->hwmon_dev); |
bc8f0a26 HG |
1314 | for (i = 0; data->sysfs_attr[i].dev_attr.attr.name; i++) |
1315 | device_remove_file(&pdev->dev, &data->sysfs_attr[i].dev_attr); | |
1316 | for (i = 0; i < ARRAY_SIZE(abituguru_sysfs_attr); i++) | |
1317 | device_remove_file(&pdev->dev, | |
1318 | &abituguru_sysfs_attr[i].dev_attr); | |
04a6217d | 1319 | platform_set_drvdata(pdev, NULL); |
f2b84bbc HG |
1320 | kfree(data); |
1321 | ||
1322 | return 0; | |
1323 | } | |
1324 | ||
1325 | static struct abituguru_data *abituguru_update_device(struct device *dev) | |
1326 | { | |
1327 | int i, err; | |
1328 | struct abituguru_data *data = dev_get_drvdata(dev); | |
1329 | /* fake a complete successful read if no update necessary. */ | |
1330 | char success = 1; | |
1331 | ||
1332 | mutex_lock(&data->update_lock); | |
1333 | if (time_after(jiffies, data->last_updated + HZ)) { | |
1334 | success = 0; | |
1335 | if ((err = abituguru_read(data, ABIT_UGURU_ALARM_BANK, 0, | |
1336 | data->alarms, 3, 0)) != 3) | |
1337 | goto LEAVE_UPDATE; | |
a2392e0b | 1338 | for (i = 0; i < ABIT_UGURU_MAX_BANK1_SENSORS; i++) { |
f2b84bbc HG |
1339 | if ((err = abituguru_read(data, |
1340 | ABIT_UGURU_SENSOR_BANK1, i, | |
1341 | &data->bank1_value[i], 1, 0)) != 1) | |
1342 | goto LEAVE_UPDATE; | |
1343 | if ((err = abituguru_read(data, | |
1344 | ABIT_UGURU_SENSOR_BANK1 + 1, i, | |
1345 | data->bank1_settings[i], 3, 0)) != 3) | |
1346 | goto LEAVE_UPDATE; | |
1347 | } | |
1348 | for (i = 0; i < data->bank2_sensors; i++) | |
1349 | if ((err = abituguru_read(data, | |
1350 | ABIT_UGURU_SENSOR_BANK2, i, | |
1351 | &data->bank2_value[i], 1, 0)) != 1) | |
1352 | goto LEAVE_UPDATE; | |
1353 | /* success! */ | |
1354 | success = 1; | |
1355 | data->update_timeouts = 0; | |
1356 | LEAVE_UPDATE: | |
1357 | /* handle timeout condition */ | |
faf9b616 | 1358 | if (!success && (err == -EBUSY || err >= 0)) { |
f2b84bbc HG |
1359 | /* No overflow please */ |
1360 | if (data->update_timeouts < 255u) | |
1361 | data->update_timeouts++; | |
1362 | if (data->update_timeouts <= ABIT_UGURU_MAX_TIMEOUTS) { | |
1363 | ABIT_UGURU_DEBUG(3, "timeout exceeded, will " | |
1364 | "try again next update\n"); | |
1365 | /* Just a timeout, fake a successful read */ | |
1366 | success = 1; | |
1367 | } else | |
1368 | ABIT_UGURU_DEBUG(1, "timeout exceeded %d " | |
1369 | "times waiting for more input state\n", | |
1370 | (int)data->update_timeouts); | |
1371 | } | |
1372 | /* On success set last_updated */ | |
1373 | if (success) | |
1374 | data->last_updated = jiffies; | |
1375 | } | |
1376 | mutex_unlock(&data->update_lock); | |
1377 | ||
1378 | if (success) | |
1379 | return data; | |
1380 | else | |
1381 | return NULL; | |
1382 | } | |
1383 | ||
360b9ab2 HG |
1384 | #ifdef CONFIG_PM |
1385 | static int abituguru_suspend(struct platform_device *pdev, pm_message_t state) | |
1386 | { | |
1387 | struct abituguru_data *data = platform_get_drvdata(pdev); | |
1388 | /* make sure all communications with the uguru are done and no new | |
1389 | ones are started */ | |
1390 | mutex_lock(&data->update_lock); | |
1391 | return 0; | |
1392 | } | |
1393 | ||
1394 | static int abituguru_resume(struct platform_device *pdev) | |
1395 | { | |
1396 | struct abituguru_data *data = platform_get_drvdata(pdev); | |
1397 | /* See if the uGuru is still ready */ | |
1398 | if (inb_p(data->addr + ABIT_UGURU_DATA) != ABIT_UGURU_STATUS_INPUT) | |
1399 | data->uguru_ready = 0; | |
1400 | mutex_unlock(&data->update_lock); | |
1401 | return 0; | |
1402 | } | |
1403 | #else | |
1404 | #define abituguru_suspend NULL | |
1405 | #define abituguru_resume NULL | |
1406 | #endif /* CONFIG_PM */ | |
1407 | ||
f2b84bbc HG |
1408 | static struct platform_driver abituguru_driver = { |
1409 | .driver = { | |
1410 | .owner = THIS_MODULE, | |
1411 | .name = ABIT_UGURU_NAME, | |
1412 | }, | |
360b9ab2 HG |
1413 | .probe = abituguru_probe, |
1414 | .remove = __devexit_p(abituguru_remove), | |
1415 | .suspend = abituguru_suspend, | |
1416 | .resume = abituguru_resume, | |
f2b84bbc HG |
1417 | }; |
1418 | ||
1419 | static int __init abituguru_detect(void) | |
1420 | { | |
1421 | /* See if there is an uguru there. After a reboot uGuru will hold 0x00 | |
1422 | at DATA and 0xAC, when this driver has already been loaded once | |
1423 | DATA will hold 0x08. For most uGuru's CMD will hold 0xAC in either | |
1424 | scenario but some will hold 0x00. | |
25985edc | 1425 | Some uGuru's initially hold 0x09 at DATA and will only hold 0x08 |
f2b84bbc HG |
1426 | after reading CMD first, so CMD must be read first! */ |
1427 | u8 cmd_val = inb_p(ABIT_UGURU_BASE + ABIT_UGURU_CMD); | |
1428 | u8 data_val = inb_p(ABIT_UGURU_BASE + ABIT_UGURU_DATA); | |
1429 | if (((data_val == 0x00) || (data_val == 0x08)) && | |
1430 | ((cmd_val == 0x00) || (cmd_val == 0xAC))) | |
1431 | return ABIT_UGURU_BASE; | |
1432 | ||
1433 | ABIT_UGURU_DEBUG(2, "no Abit uGuru found, data = 0x%02X, cmd = " | |
1434 | "0x%02X\n", (unsigned int)data_val, (unsigned int)cmd_val); | |
1435 | ||
1436 | if (force) { | |
28ebfa13 | 1437 | pr_info("Assuming Abit uGuru is present because of \"force\" parameter\n"); |
f2b84bbc HG |
1438 | return ABIT_UGURU_BASE; |
1439 | } | |
1440 | ||
1441 | /* No uGuru found */ | |
1442 | return -ENODEV; | |
1443 | } | |
1444 | ||
1445 | static struct platform_device *abituguru_pdev; | |
1446 | ||
1447 | static int __init abituguru_init(void) | |
1448 | { | |
1449 | int address, err; | |
1450 | struct resource res = { .flags = IORESOURCE_IO }; | |
1855256c | 1451 | const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); |
c182f5bb HG |
1452 | |
1453 | /* safety check, refuse to load on non Abit motherboards */ | |
1454 | if (!force && (!board_vendor || | |
1455 | strcmp(board_vendor, "http://www.abit.com.tw/"))) | |
1456 | return -ENODEV; | |
c182f5bb | 1457 | |
f2b84bbc HG |
1458 | address = abituguru_detect(); |
1459 | if (address < 0) | |
1460 | return address; | |
1461 | ||
1462 | err = platform_driver_register(&abituguru_driver); | |
1463 | if (err) | |
1464 | goto exit; | |
1465 | ||
1466 | abituguru_pdev = platform_device_alloc(ABIT_UGURU_NAME, address); | |
1467 | if (!abituguru_pdev) { | |
28ebfa13 | 1468 | pr_err("Device allocation failed\n"); |
f2b84bbc HG |
1469 | err = -ENOMEM; |
1470 | goto exit_driver_unregister; | |
1471 | } | |
1472 | ||
1473 | res.start = address; | |
1474 | res.end = address + ABIT_UGURU_REGION_LENGTH - 1; | |
1475 | res.name = ABIT_UGURU_NAME; | |
1476 | ||
1477 | err = platform_device_add_resources(abituguru_pdev, &res, 1); | |
1478 | if (err) { | |
28ebfa13 | 1479 | pr_err("Device resource addition failed (%d)\n", err); |
f2b84bbc HG |
1480 | goto exit_device_put; |
1481 | } | |
1482 | ||
1483 | err = platform_device_add(abituguru_pdev); | |
1484 | if (err) { | |
28ebfa13 | 1485 | pr_err("Device addition failed (%d)\n", err); |
f2b84bbc HG |
1486 | goto exit_device_put; |
1487 | } | |
1488 | ||
1489 | return 0; | |
1490 | ||
1491 | exit_device_put: | |
1492 | platform_device_put(abituguru_pdev); | |
1493 | exit_driver_unregister: | |
1494 | platform_driver_unregister(&abituguru_driver); | |
1495 | exit: | |
1496 | return err; | |
1497 | } | |
1498 | ||
1499 | static void __exit abituguru_exit(void) | |
1500 | { | |
1501 | platform_device_unregister(abituguru_pdev); | |
1502 | platform_driver_unregister(&abituguru_driver); | |
1503 | } | |
1504 | ||
93d0cc58 | 1505 | MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); |
f2b84bbc HG |
1506 | MODULE_DESCRIPTION("Abit uGuru Sensor device"); |
1507 | MODULE_LICENSE("GPL"); | |
1508 | ||
1509 | module_init(abituguru_init); | |
1510 | module_exit(abituguru_exit); |