Commit | Line | Data |
---|---|---|
cae2caae CL |
1 | /* |
2 | * adm1029.c - Part of lm_sensors, Linux kernel modules for hardware monitoring | |
3 | * | |
4 | * Copyright (C) 2006 Corentin LABBE <corentin.labbe@geomatys.fr> | |
5 | * | |
6 | * Based on LM83 Driver by Jean Delvare <khali@linux-fr.org> | |
7 | * | |
8 | * Give only processor, motherboard temperatures and fan tachs | |
9 | * Very rare chip please let me know if you use it | |
10 | * | |
11 | * http://www.analog.com/UploadedFiles/Data_Sheets/ADM1029.pdf | |
12 | * | |
13 | * | |
14 | * This program is free software; you can redistribute it and/or modify | |
15 | * it under the terms of the GNU General Public License as published by | |
16 | * the Free Software Foundation version 2 of the License | |
17 | * | |
18 | * This program is distributed in the hope that it will be useful, | |
19 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
20 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
21 | * GNU General Public License for more details. | |
22 | * | |
23 | * You should have received a copy of the GNU General Public License | |
24 | * along with this program; if not, write to the Free Software | |
25 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
26 | */ | |
27 | ||
28 | #include <linux/module.h> | |
29 | #include <linux/init.h> | |
30 | #include <linux/slab.h> | |
31 | #include <linux/jiffies.h> | |
32 | #include <linux/i2c.h> | |
33 | #include <linux/hwmon-sysfs.h> | |
34 | #include <linux/hwmon.h> | |
35 | #include <linux/err.h> | |
36 | #include <linux/mutex.h> | |
37 | ||
38 | /* | |
39 | * Addresses to scan | |
40 | */ | |
41 | ||
25e9c86d MH |
42 | static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, |
43 | 0x2e, 0x2f, I2C_CLIENT_END | |
cae2caae CL |
44 | }; |
45 | ||
46 | /* | |
47 | * Insmod parameters | |
48 | */ | |
49 | ||
50 | I2C_CLIENT_INSMOD_1(adm1029); | |
51 | ||
52 | /* | |
53 | * The ADM1029 registers | |
54 | * Manufacturer ID is 0x41 for Analog Devices | |
55 | */ | |
56 | ||
57 | #define ADM1029_REG_MAN_ID 0x0D | |
58 | #define ADM1029_REG_CHIP_ID 0x0E | |
59 | #define ADM1029_REG_CONFIG 0x01 | |
60 | #define ADM1029_REG_NB_FAN_SUPPORT 0x02 | |
61 | ||
62 | #define ADM1029_REG_TEMP_DEVICES_INSTALLED 0x06 | |
63 | ||
64 | #define ADM1029_REG_LOCAL_TEMP 0xA0 | |
65 | #define ADM1029_REG_REMOTE1_TEMP 0xA1 | |
66 | #define ADM1029_REG_REMOTE2_TEMP 0xA2 | |
67 | ||
68 | #define ADM1029_REG_LOCAL_TEMP_HIGH 0x90 | |
69 | #define ADM1029_REG_REMOTE1_TEMP_HIGH 0x91 | |
70 | #define ADM1029_REG_REMOTE2_TEMP_HIGH 0x92 | |
71 | ||
72 | #define ADM1029_REG_LOCAL_TEMP_LOW 0x98 | |
73 | #define ADM1029_REG_REMOTE1_TEMP_LOW 0x99 | |
74 | #define ADM1029_REG_REMOTE2_TEMP_LOW 0x9A | |
75 | ||
76 | #define ADM1029_REG_FAN1 0x70 | |
77 | #define ADM1029_REG_FAN2 0x71 | |
78 | ||
79 | #define ADM1029_REG_FAN1_MIN 0x78 | |
80 | #define ADM1029_REG_FAN2_MIN 0x79 | |
81 | ||
82 | #define ADM1029_REG_FAN1_CONFIG 0x68 | |
83 | #define ADM1029_REG_FAN2_CONFIG 0x69 | |
84 | ||
85 | #define TEMP_FROM_REG(val) ((val) * 1000) | |
86 | ||
87 | #define DIV_FROM_REG(val) ( 1 << (((val) >> 6) - 1)) | |
88 | ||
89 | /* Registers to be checked by adm1029_update_device() */ | |
90 | static const u8 ADM1029_REG_TEMP[] = { | |
91 | ADM1029_REG_LOCAL_TEMP, | |
92 | ADM1029_REG_REMOTE1_TEMP, | |
93 | ADM1029_REG_REMOTE2_TEMP, | |
94 | ADM1029_REG_LOCAL_TEMP_HIGH, | |
95 | ADM1029_REG_REMOTE1_TEMP_HIGH, | |
96 | ADM1029_REG_REMOTE2_TEMP_HIGH, | |
97 | ADM1029_REG_LOCAL_TEMP_LOW, | |
98 | ADM1029_REG_REMOTE1_TEMP_LOW, | |
99 | ADM1029_REG_REMOTE2_TEMP_LOW, | |
100 | }; | |
101 | ||
102 | static const u8 ADM1029_REG_FAN[] = { | |
103 | ADM1029_REG_FAN1, | |
104 | ADM1029_REG_FAN2, | |
105 | ADM1029_REG_FAN1_MIN, | |
106 | ADM1029_REG_FAN2_MIN, | |
107 | }; | |
108 | ||
109 | static const u8 ADM1029_REG_FAN_DIV[] = { | |
110 | ADM1029_REG_FAN1_CONFIG, | |
111 | ADM1029_REG_FAN2_CONFIG, | |
112 | }; | |
113 | ||
114 | /* | |
115 | * Functions declaration | |
116 | */ | |
117 | ||
9c97fb4d JD |
118 | static int adm1029_probe(struct i2c_client *client, |
119 | const struct i2c_device_id *id); | |
120 | static int adm1029_detect(struct i2c_client *client, int kind, | |
121 | struct i2c_board_info *info); | |
122 | static int adm1029_remove(struct i2c_client *client); | |
cae2caae CL |
123 | static struct adm1029_data *adm1029_update_device(struct device *dev); |
124 | static int adm1029_init_client(struct i2c_client *client); | |
125 | ||
126 | /* | |
127 | * Driver data (common to all clients) | |
128 | */ | |
129 | ||
9c97fb4d JD |
130 | static const struct i2c_device_id adm1029_id[] = { |
131 | { "adm1029", adm1029 }, | |
132 | { } | |
133 | }; | |
134 | MODULE_DEVICE_TABLE(i2c, adm1029_id); | |
135 | ||
cae2caae | 136 | static struct i2c_driver adm1029_driver = { |
9c97fb4d | 137 | .class = I2C_CLASS_HWMON, |
cae2caae CL |
138 | .driver = { |
139 | .name = "adm1029", | |
140 | }, | |
9c97fb4d JD |
141 | .probe = adm1029_probe, |
142 | .remove = adm1029_remove, | |
143 | .id_table = adm1029_id, | |
144 | .detect = adm1029_detect, | |
145 | .address_data = &addr_data, | |
cae2caae CL |
146 | }; |
147 | ||
148 | /* | |
149 | * Client data (each client gets its own) | |
150 | */ | |
151 | ||
152 | struct adm1029_data { | |
1beeffe4 | 153 | struct device *hwmon_dev; |
cae2caae CL |
154 | struct mutex update_lock; |
155 | char valid; /* zero until following fields are valid */ | |
156 | unsigned long last_updated; /* in jiffies */ | |
157 | ||
158 | /* registers values, signed for temperature, unsigned for other stuff */ | |
159 | s8 temp[ARRAY_SIZE(ADM1029_REG_TEMP)]; | |
160 | u8 fan[ARRAY_SIZE(ADM1029_REG_FAN)]; | |
161 | u8 fan_div[ARRAY_SIZE(ADM1029_REG_FAN_DIV)]; | |
162 | }; | |
163 | ||
164 | /* | |
165 | * Sysfs stuff | |
166 | */ | |
167 | ||
168 | static ssize_t | |
169 | show_temp(struct device *dev, struct device_attribute *devattr, char *buf) | |
170 | { | |
171 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | |
172 | struct adm1029_data *data = adm1029_update_device(dev); | |
173 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])); | |
174 | } | |
175 | ||
176 | static ssize_t | |
177 | show_fan(struct device *dev, struct device_attribute *devattr, char *buf) | |
178 | { | |
179 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | |
180 | struct adm1029_data *data = adm1029_update_device(dev); | |
181 | u16 val; | |
366716e6 CL |
182 | if (data->fan[attr->index] == 0 |
183 | || (data->fan_div[attr->index] & 0xC0) == 0 | |
cae2caae CL |
184 | || data->fan[attr->index] == 255) { |
185 | return sprintf(buf, "0\n"); | |
186 | } | |
187 | ||
188 | val = 1880 * 120 / DIV_FROM_REG(data->fan_div[attr->index]) | |
189 | / data->fan[attr->index]; | |
190 | return sprintf(buf, "%d\n", val); | |
191 | } | |
192 | ||
193 | static ssize_t | |
194 | show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf) | |
195 | { | |
196 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | |
197 | struct adm1029_data *data = adm1029_update_device(dev); | |
366716e6 | 198 | if ((data->fan_div[attr->index] & 0xC0) == 0) |
cae2caae CL |
199 | return sprintf(buf, "0\n"); |
200 | return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index])); | |
201 | } | |
202 | ||
203 | static ssize_t set_fan_div(struct device *dev, | |
204 | struct device_attribute *devattr, const char *buf, size_t count) | |
205 | { | |
206 | struct i2c_client *client = to_i2c_client(dev); | |
207 | struct adm1029_data *data = i2c_get_clientdata(client); | |
208 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | |
209 | long val = simple_strtol(buf, NULL, 10); | |
210 | u8 reg; | |
211 | ||
212 | mutex_lock(&data->update_lock); | |
213 | ||
214 | /*Read actual config */ | |
215 | reg = i2c_smbus_read_byte_data(client, | |
216 | ADM1029_REG_FAN_DIV[attr->index]); | |
217 | ||
218 | switch (val) { | |
219 | case 1: | |
220 | val = 1; | |
221 | break; | |
222 | case 2: | |
223 | val = 2; | |
224 | break; | |
225 | case 4: | |
226 | val = 3; | |
227 | break; | |
228 | default: | |
229 | mutex_unlock(&data->update_lock); | |
230 | dev_err(&client->dev, "fan_div value %ld not " | |
231 | "supported. Choose one of 1, 2 or 4!\n", val); | |
232 | return -EINVAL; | |
233 | } | |
234 | /* Update the value */ | |
235 | reg = (reg & 0x3F) | (val << 6); | |
236 | ||
237 | /* Write value */ | |
238 | i2c_smbus_write_byte_data(client, | |
239 | ADM1029_REG_FAN_DIV[attr->index], reg); | |
240 | mutex_unlock(&data->update_lock); | |
241 | ||
242 | return count; | |
243 | } | |
244 | ||
245 | /* | |
246 | Access rights on sysfs, S_IRUGO stand for Is Readable by User, Group and Others | |
247 | S_IWUSR stand for Is Writable by User | |
248 | */ | |
249 | static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); | |
250 | static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); | |
251 | static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); | |
252 | ||
253 | static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 3); | |
254 | static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp, NULL, 4); | |
255 | static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp, NULL, 5); | |
256 | ||
257 | static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO, show_temp, NULL, 6); | |
258 | static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO, show_temp, NULL, 7); | |
259 | static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO, show_temp, NULL, 8); | |
260 | ||
261 | static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); | |
262 | static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); | |
263 | ||
264 | static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO, show_fan, NULL, 2); | |
265 | static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO, show_fan, NULL, 3); | |
266 | ||
267 | static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, | |
268 | show_fan_div, set_fan_div, 0); | |
269 | static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, | |
270 | show_fan_div, set_fan_div, 1); | |
271 | ||
272 | static struct attribute *adm1029_attributes[] = { | |
273 | &sensor_dev_attr_temp1_input.dev_attr.attr, | |
274 | &sensor_dev_attr_temp1_min.dev_attr.attr, | |
275 | &sensor_dev_attr_temp1_max.dev_attr.attr, | |
276 | &sensor_dev_attr_temp2_input.dev_attr.attr, | |
277 | &sensor_dev_attr_temp2_min.dev_attr.attr, | |
278 | &sensor_dev_attr_temp2_max.dev_attr.attr, | |
279 | &sensor_dev_attr_temp3_input.dev_attr.attr, | |
280 | &sensor_dev_attr_temp3_min.dev_attr.attr, | |
281 | &sensor_dev_attr_temp3_max.dev_attr.attr, | |
282 | &sensor_dev_attr_fan1_input.dev_attr.attr, | |
283 | &sensor_dev_attr_fan2_input.dev_attr.attr, | |
284 | &sensor_dev_attr_fan1_min.dev_attr.attr, | |
285 | &sensor_dev_attr_fan2_min.dev_attr.attr, | |
286 | &sensor_dev_attr_fan1_div.dev_attr.attr, | |
287 | &sensor_dev_attr_fan2_div.dev_attr.attr, | |
288 | NULL | |
289 | }; | |
290 | ||
291 | static const struct attribute_group adm1029_group = { | |
292 | .attrs = adm1029_attributes, | |
293 | }; | |
294 | ||
295 | /* | |
296 | * Real code | |
297 | */ | |
298 | ||
9c97fb4d JD |
299 | /* Return 0 if detection is successful, -ENODEV otherwise */ |
300 | static int adm1029_detect(struct i2c_client *client, int kind, | |
301 | struct i2c_board_info *info) | |
cae2caae | 302 | { |
9c97fb4d | 303 | struct i2c_adapter *adapter = client->adapter; |
52df6440 | 304 | u8 man_id, chip_id, temp_devices_installed, nb_fan_support; |
cae2caae | 305 | |
cae2caae | 306 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
9c97fb4d | 307 | return -ENODEV; |
cae2caae | 308 | |
cae2caae CL |
309 | /* ADM1029 doesn't have CHIP ID, check just MAN ID |
310 | * For better detection we check also ADM1029_TEMP_DEVICES_INSTALLED, | |
311 | * ADM1029_REG_NB_FAN_SUPPORT and compare it with possible values | |
312 | * documented | |
313 | */ | |
314 | ||
52df6440 JD |
315 | man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID); |
316 | chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID); | |
317 | temp_devices_installed = i2c_smbus_read_byte_data(client, | |
cae2caae | 318 | ADM1029_REG_TEMP_DEVICES_INSTALLED); |
52df6440 | 319 | nb_fan_support = i2c_smbus_read_byte_data(client, |
cae2caae | 320 | ADM1029_REG_NB_FAN_SUPPORT); |
52df6440 JD |
321 | /* 0x41 is Analog Devices */ |
322 | if (man_id != 0x41 || (temp_devices_installed & 0xf9) != 0x01 | |
323 | || nb_fan_support != 0x03) | |
324 | return -ENODEV; | |
325 | ||
326 | if ((chip_id & 0xF0) != 0x00) { | |
327 | /* There are no "official" CHIP ID, so actually | |
328 | * we use Major/Minor revision for that */ | |
329 | pr_info("adm1029: Unknown major revision %x, " | |
330 | "please let us know\n", chip_id); | |
331 | return -ENODEV; | |
cae2caae | 332 | } |
52df6440 | 333 | |
9c97fb4d | 334 | strlcpy(info->type, "adm1029", I2C_NAME_SIZE); |
cae2caae | 335 | |
9c97fb4d JD |
336 | return 0; |
337 | } | |
338 | ||
339 | static int adm1029_probe(struct i2c_client *client, | |
340 | const struct i2c_device_id *id) | |
341 | { | |
342 | struct adm1029_data *data; | |
343 | int err; | |
344 | ||
345 | data = kzalloc(sizeof(struct adm1029_data), GFP_KERNEL); | |
346 | if (!data) { | |
347 | err = -ENOMEM; | |
348 | goto exit; | |
cae2caae CL |
349 | } |
350 | ||
9c97fb4d | 351 | i2c_set_clientdata(client, data); |
cae2caae CL |
352 | mutex_init(&data->update_lock); |
353 | ||
cae2caae CL |
354 | /* |
355 | * Initialize the ADM1029 chip | |
356 | * Check config register | |
357 | */ | |
9c97fb4d JD |
358 | if (adm1029_init_client(client) == 0) { |
359 | err = -ENODEV; | |
360 | goto exit_free; | |
361 | } | |
cae2caae CL |
362 | |
363 | /* Register sysfs hooks */ | |
364 | if ((err = sysfs_create_group(&client->dev.kobj, &adm1029_group))) | |
9c97fb4d | 365 | goto exit_free; |
cae2caae | 366 | |
1beeffe4 TJ |
367 | data->hwmon_dev = hwmon_device_register(&client->dev); |
368 | if (IS_ERR(data->hwmon_dev)) { | |
369 | err = PTR_ERR(data->hwmon_dev); | |
cae2caae CL |
370 | goto exit_remove_files; |
371 | } | |
372 | ||
373 | return 0; | |
374 | ||
375 | exit_remove_files: | |
376 | sysfs_remove_group(&client->dev.kobj, &adm1029_group); | |
cae2caae CL |
377 | exit_free: |
378 | kfree(data); | |
379 | exit: | |
380 | return err; | |
381 | } | |
382 | ||
383 | static int adm1029_init_client(struct i2c_client *client) | |
384 | { | |
385 | u8 config; | |
386 | config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG); | |
387 | if ((config & 0x10) == 0) { | |
388 | i2c_smbus_write_byte_data(client, ADM1029_REG_CONFIG, | |
389 | config | 0x10); | |
390 | } | |
391 | /* recheck config */ | |
392 | config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG); | |
393 | if ((config & 0x10) == 0) { | |
394 | dev_err(&client->dev, "Initialization failed!\n"); | |
395 | return 0; | |
396 | } | |
397 | return 1; | |
398 | } | |
399 | ||
9c97fb4d | 400 | static int adm1029_remove(struct i2c_client *client) |
cae2caae CL |
401 | { |
402 | struct adm1029_data *data = i2c_get_clientdata(client); | |
cae2caae | 403 | |
1beeffe4 | 404 | hwmon_device_unregister(data->hwmon_dev); |
cae2caae CL |
405 | sysfs_remove_group(&client->dev.kobj, &adm1029_group); |
406 | ||
cae2caae CL |
407 | kfree(data); |
408 | return 0; | |
409 | } | |
410 | ||
411 | /* | |
412 | function that update the status of the chips (temperature for exemple) | |
413 | */ | |
414 | static struct adm1029_data *adm1029_update_device(struct device *dev) | |
415 | { | |
416 | struct i2c_client *client = to_i2c_client(dev); | |
417 | struct adm1029_data *data = i2c_get_clientdata(client); | |
418 | ||
419 | mutex_lock(&data->update_lock); | |
420 | /* | |
421 | * Use the "cache" Luke, don't recheck values | |
422 | * if there are already checked not a long time later | |
423 | */ | |
424 | if (time_after(jiffies, data->last_updated + HZ * 2) | |
425 | || !data->valid) { | |
426 | int nr; | |
427 | ||
428 | dev_dbg(&client->dev, "Updating adm1029 data\n"); | |
429 | ||
430 | for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_TEMP); nr++) { | |
431 | data->temp[nr] = | |
432 | i2c_smbus_read_byte_data(client, | |
433 | ADM1029_REG_TEMP[nr]); | |
434 | } | |
435 | for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN); nr++) { | |
436 | data->fan[nr] = | |
437 | i2c_smbus_read_byte_data(client, | |
438 | ADM1029_REG_FAN[nr]); | |
439 | } | |
440 | for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN_DIV); nr++) { | |
441 | data->fan_div[nr] = | |
442 | i2c_smbus_read_byte_data(client, | |
443 | ADM1029_REG_FAN_DIV[nr]); | |
444 | } | |
445 | ||
446 | data->last_updated = jiffies; | |
447 | data->valid = 1; | |
448 | } | |
449 | ||
450 | mutex_unlock(&data->update_lock); | |
451 | ||
452 | return data; | |
453 | } | |
454 | ||
455 | /* | |
456 | Common module stuff | |
457 | */ | |
458 | static int __init sensors_adm1029_init(void) | |
459 | { | |
460 | ||
461 | return i2c_add_driver(&adm1029_driver); | |
462 | } | |
463 | ||
464 | static void __exit sensors_adm1029_exit(void) | |
465 | { | |
466 | ||
467 | i2c_del_driver(&adm1029_driver); | |
468 | } | |
469 | ||
470 | MODULE_AUTHOR("Corentin LABBE <corentin.labbe@geomatys.fr>"); | |
471 | MODULE_DESCRIPTION("adm1029 driver"); | |
472 | MODULE_LICENSE("GPL v2"); | |
473 | ||
474 | module_init(sensors_adm1029_init); | |
475 | module_exit(sensors_adm1029_exit); |