Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | gl520sm.c - Part of lm_sensors, Linux kernel modules for hardware | |
3 | monitoring | |
4 | Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>, | |
96de0e25 | 5 | Kyösti Mälkki <kmalkki@cc.hut.fi> |
1da177e4 LT |
6 | Copyright (c) 2005 Maarten Deprez <maartendeprez@users.sourceforge.net> |
7 | ||
8 | This program is free software; you can redistribute it and/or modify | |
9 | it under the terms of the GNU General Public License as published by | |
10 | the Free Software Foundation; either version 2 of the License, or | |
11 | (at your option) any later version. | |
12 | ||
13 | This program is distributed in the hope that it will be useful, | |
14 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | GNU General Public License for more details. | |
17 | ||
18 | You should have received a copy of the GNU General Public License | |
19 | along with this program; if not, write to the Free Software | |
20 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
21 | ||
22 | */ | |
23 | ||
24 | #include <linux/module.h> | |
25 | #include <linux/init.h> | |
26 | #include <linux/slab.h> | |
0cacdf29 | 27 | #include <linux/jiffies.h> |
1da177e4 | 28 | #include <linux/i2c.h> |
943b0830 | 29 | #include <linux/hwmon.h> |
303760b4 | 30 | #include <linux/hwmon-vid.h> |
943b0830 | 31 | #include <linux/err.h> |
9a61bf63 | 32 | #include <linux/mutex.h> |
87808be4 | 33 | #include <linux/sysfs.h> |
1da177e4 LT |
34 | |
35 | /* Type of the extra sensor */ | |
36 | static unsigned short extra_sensor_type; | |
37 | module_param(extra_sensor_type, ushort, 0); | |
38 | MODULE_PARM_DESC(extra_sensor_type, "Type of extra sensor (0=autodetect, 1=temperature, 2=voltage)"); | |
39 | ||
40 | /* Addresses to scan */ | |
41 | static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; | |
1da177e4 LT |
42 | |
43 | /* Insmod parameters */ | |
f4b50261 | 44 | I2C_CLIENT_INSMOD_1(gl520sm); |
1da177e4 | 45 | |
f28dc2f7 | 46 | /* Many GL520 constants specified below |
1da177e4 | 47 | One of the inputs can be configured as either temp or voltage. |
f28dc2f7 | 48 | That's why _TEMP2 and _IN4 access the same register |
1da177e4 LT |
49 | */ |
50 | ||
51 | /* The GL520 registers */ | |
52 | #define GL520_REG_CHIP_ID 0x00 | |
53 | #define GL520_REG_REVISION 0x01 | |
54 | #define GL520_REG_CONF 0x03 | |
55 | #define GL520_REG_MASK 0x11 | |
56 | ||
57 | #define GL520_REG_VID_INPUT 0x02 | |
58 | ||
59 | #define GL520_REG_IN0_INPUT 0x15 | |
60 | #define GL520_REG_IN0_LIMIT 0x0c | |
61 | #define GL520_REG_IN0_MIN GL520_REG_IN0_LIMIT | |
62 | #define GL520_REG_IN0_MAX GL520_REG_IN0_LIMIT | |
63 | ||
64 | #define GL520_REG_IN1_INPUT 0x14 | |
65 | #define GL520_REG_IN1_LIMIT 0x09 | |
66 | #define GL520_REG_IN1_MIN GL520_REG_IN1_LIMIT | |
67 | #define GL520_REG_IN1_MAX GL520_REG_IN1_LIMIT | |
68 | ||
69 | #define GL520_REG_IN2_INPUT 0x13 | |
70 | #define GL520_REG_IN2_LIMIT 0x0a | |
71 | #define GL520_REG_IN2_MIN GL520_REG_IN2_LIMIT | |
72 | #define GL520_REG_IN2_MAX GL520_REG_IN2_LIMIT | |
73 | ||
74 | #define GL520_REG_IN3_INPUT 0x0d | |
75 | #define GL520_REG_IN3_LIMIT 0x0b | |
76 | #define GL520_REG_IN3_MIN GL520_REG_IN3_LIMIT | |
77 | #define GL520_REG_IN3_MAX GL520_REG_IN3_LIMIT | |
78 | ||
79 | #define GL520_REG_IN4_INPUT 0x0e | |
80 | #define GL520_REG_IN4_MAX 0x17 | |
81 | #define GL520_REG_IN4_MIN 0x18 | |
82 | ||
83 | #define GL520_REG_TEMP1_INPUT 0x04 | |
84 | #define GL520_REG_TEMP1_MAX 0x05 | |
85 | #define GL520_REG_TEMP1_MAX_HYST 0x06 | |
86 | ||
87 | #define GL520_REG_TEMP2_INPUT 0x0e | |
88 | #define GL520_REG_TEMP2_MAX 0x17 | |
89 | #define GL520_REG_TEMP2_MAX_HYST 0x18 | |
90 | ||
91 | #define GL520_REG_FAN_INPUT 0x07 | |
92 | #define GL520_REG_FAN_MIN 0x08 | |
93 | #define GL520_REG_FAN_DIV 0x0f | |
94 | #define GL520_REG_FAN_OFF GL520_REG_FAN_DIV | |
95 | ||
96 | #define GL520_REG_ALARMS 0x12 | |
97 | #define GL520_REG_BEEP_MASK 0x10 | |
98 | #define GL520_REG_BEEP_ENABLE GL520_REG_CONF | |
99 | ||
100 | /* | |
101 | * Function declarations | |
102 | */ | |
103 | ||
104 | static int gl520_attach_adapter(struct i2c_adapter *adapter); | |
105 | static int gl520_detect(struct i2c_adapter *adapter, int address, int kind); | |
106 | static void gl520_init_client(struct i2c_client *client); | |
107 | static int gl520_detach_client(struct i2c_client *client); | |
108 | static int gl520_read_value(struct i2c_client *client, u8 reg); | |
109 | static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value); | |
110 | static struct gl520_data *gl520_update_device(struct device *dev); | |
111 | ||
112 | /* Driver data */ | |
113 | static struct i2c_driver gl520_driver = { | |
cdaf7934 | 114 | .driver = { |
cdaf7934 LR |
115 | .name = "gl520sm", |
116 | }, | |
1da177e4 LT |
117 | .attach_adapter = gl520_attach_adapter, |
118 | .detach_client = gl520_detach_client, | |
119 | }; | |
120 | ||
121 | /* Client data */ | |
122 | struct gl520_data { | |
123 | struct i2c_client client; | |
1beeffe4 | 124 | struct device *hwmon_dev; |
9a61bf63 | 125 | struct mutex update_lock; |
1da177e4 LT |
126 | char valid; /* zero until the following fields are valid */ |
127 | unsigned long last_updated; /* in jiffies */ | |
128 | ||
129 | u8 vid; | |
130 | u8 vrm; | |
131 | u8 in_input[5]; /* [0] = VVD */ | |
132 | u8 in_min[5]; /* [0] = VDD */ | |
133 | u8 in_max[5]; /* [0] = VDD */ | |
134 | u8 fan_input[2]; | |
135 | u8 fan_min[2]; | |
136 | u8 fan_div[2]; | |
137 | u8 fan_off; | |
138 | u8 temp_input[2]; | |
139 | u8 temp_max[2]; | |
140 | u8 temp_max_hyst[2]; | |
141 | u8 alarms; | |
142 | u8 beep_enable; | |
143 | u8 beep_mask; | |
144 | u8 alarm_mask; | |
145 | u8 two_temps; | |
146 | }; | |
147 | ||
148 | /* | |
149 | * Sysfs stuff | |
150 | */ | |
151 | ||
152 | #define sysfs_r(type, n, item, reg) \ | |
153 | static ssize_t get_##type##item (struct gl520_data *, char *, int); \ | |
30f74292 YI |
154 | static ssize_t get_##type##n##item (struct device *, struct device_attribute *attr, char *); \ |
155 | static ssize_t get_##type##n##item (struct device *dev, struct device_attribute *attr, char *buf) \ | |
1da177e4 LT |
156 | { \ |
157 | struct gl520_data *data = gl520_update_device(dev); \ | |
158 | return get_##type##item(data, buf, (n)); \ | |
159 | } | |
160 | ||
161 | #define sysfs_w(type, n, item, reg) \ | |
162 | static ssize_t set_##type##item (struct i2c_client *, struct gl520_data *, const char *, size_t, int, int); \ | |
30f74292 YI |
163 | static ssize_t set_##type##n##item (struct device *, struct device_attribute *attr, const char *, size_t); \ |
164 | static ssize_t set_##type##n##item (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ | |
1da177e4 LT |
165 | { \ |
166 | struct i2c_client *client = to_i2c_client(dev); \ | |
167 | struct gl520_data *data = i2c_get_clientdata(client); \ | |
168 | return set_##type##item(client, data, buf, count, (n), reg); \ | |
169 | } | |
170 | ||
171 | #define sysfs_rw_n(type, n, item, reg) \ | |
172 | sysfs_r(type, n, item, reg) \ | |
173 | sysfs_w(type, n, item, reg) \ | |
174 | static DEVICE_ATTR(type##n##item, S_IRUGO | S_IWUSR, get_##type##n##item, set_##type##n##item); | |
175 | ||
176 | #define sysfs_ro_n(type, n, item, reg) \ | |
177 | sysfs_r(type, n, item, reg) \ | |
178 | static DEVICE_ATTR(type##n##item, S_IRUGO, get_##type##n##item, NULL); | |
179 | ||
180 | #define sysfs_rw(type, item, reg) \ | |
181 | sysfs_r(type, 0, item, reg) \ | |
182 | sysfs_w(type, 0, item, reg) \ | |
183 | static DEVICE_ATTR(type##item, S_IRUGO | S_IWUSR, get_##type##0##item, set_##type##0##item); | |
184 | ||
185 | #define sysfs_ro(type, item, reg) \ | |
186 | sysfs_r(type, 0, item, reg) \ | |
187 | static DEVICE_ATTR(type##item, S_IRUGO, get_##type##0##item, NULL); | |
188 | ||
189 | ||
190 | #define sysfs_vid(n) \ | |
191 | sysfs_ro_n(cpu, n, _vid, GL520_REG_VID_INPUT) | |
192 | ||
1da177e4 LT |
193 | #define sysfs_in(n) \ |
194 | sysfs_ro_n(in, n, _input, GL520_REG_IN##n##INPUT) \ | |
195 | sysfs_rw_n(in, n, _min, GL520_REG_IN##n##_MIN) \ | |
f28dc2f7 | 196 | sysfs_rw_n(in, n, _max, GL520_REG_IN##n##_MAX) |
1da177e4 | 197 | |
1da177e4 LT |
198 | #define sysfs_fan(n) \ |
199 | sysfs_ro_n(fan, n, _input, GL520_REG_FAN_INPUT) \ | |
200 | sysfs_rw_n(fan, n, _min, GL520_REG_FAN_MIN) \ | |
201 | sysfs_rw_n(fan, n, _div, GL520_REG_FAN_DIV) | |
202 | ||
1da177e4 | 203 | #define sysfs_fan_off(n) \ |
f28dc2f7 | 204 | sysfs_rw_n(fan, n, _off, GL520_REG_FAN_OFF) |
1da177e4 | 205 | |
1da177e4 LT |
206 | #define sysfs_temp(n) \ |
207 | sysfs_ro_n(temp, n, _input, GL520_REG_TEMP##n##_INPUT) \ | |
208 | sysfs_rw_n(temp, n, _max, GL520_REG_TEMP##n##_MAX) \ | |
209 | sysfs_rw_n(temp, n, _max_hyst, GL520_REG_TEMP##n##_MAX_HYST) | |
210 | ||
1da177e4 LT |
211 | #define sysfs_alarms() \ |
212 | sysfs_ro(alarms, , GL520_REG_ALARMS) \ | |
213 | sysfs_rw(beep_enable, , GL520_REG_BEEP_ENABLE) \ | |
214 | sysfs_rw(beep_mask, , GL520_REG_BEEP_MASK) | |
215 | ||
1da177e4 LT |
216 | |
217 | sysfs_vid(0) | |
218 | ||
219 | sysfs_in(0) | |
220 | sysfs_in(1) | |
221 | sysfs_in(2) | |
222 | sysfs_in(3) | |
223 | sysfs_in(4) | |
224 | ||
225 | sysfs_fan(1) | |
226 | sysfs_fan(2) | |
227 | sysfs_fan_off(1) | |
228 | ||
229 | sysfs_temp(1) | |
230 | sysfs_temp(2) | |
231 | ||
232 | sysfs_alarms() | |
233 | ||
234 | ||
235 | static ssize_t get_cpu_vid(struct gl520_data *data, char *buf, int n) | |
236 | { | |
237 | return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm)); | |
238 | } | |
239 | ||
240 | #define VDD_FROM_REG(val) (((val)*95+2)/4) | |
241 | #define VDD_TO_REG(val) (SENSORS_LIMIT((((val)*4+47)/95),0,255)) | |
242 | ||
243 | #define IN_FROM_REG(val) ((val)*19) | |
244 | #define IN_TO_REG(val) (SENSORS_LIMIT((((val)+9)/19),0,255)) | |
245 | ||
246 | static ssize_t get_in_input(struct gl520_data *data, char *buf, int n) | |
247 | { | |
248 | u8 r = data->in_input[n]; | |
249 | ||
250 | if (n == 0) | |
251 | return sprintf(buf, "%d\n", VDD_FROM_REG(r)); | |
252 | else | |
253 | return sprintf(buf, "%d\n", IN_FROM_REG(r)); | |
254 | } | |
255 | ||
256 | static ssize_t get_in_min(struct gl520_data *data, char *buf, int n) | |
257 | { | |
258 | u8 r = data->in_min[n]; | |
259 | ||
260 | if (n == 0) | |
261 | return sprintf(buf, "%d\n", VDD_FROM_REG(r)); | |
262 | else | |
263 | return sprintf(buf, "%d\n", IN_FROM_REG(r)); | |
264 | } | |
265 | ||
266 | static ssize_t get_in_max(struct gl520_data *data, char *buf, int n) | |
267 | { | |
268 | u8 r = data->in_max[n]; | |
269 | ||
270 | if (n == 0) | |
271 | return sprintf(buf, "%d\n", VDD_FROM_REG(r)); | |
272 | else | |
273 | return sprintf(buf, "%d\n", IN_FROM_REG(r)); | |
274 | } | |
275 | ||
276 | static ssize_t set_in_min(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) | |
277 | { | |
278 | long v = simple_strtol(buf, NULL, 10); | |
279 | u8 r; | |
280 | ||
9a61bf63 | 281 | mutex_lock(&data->update_lock); |
1da177e4 LT |
282 | |
283 | if (n == 0) | |
284 | r = VDD_TO_REG(v); | |
285 | else | |
286 | r = IN_TO_REG(v); | |
287 | ||
288 | data->in_min[n] = r; | |
289 | ||
290 | if (n < 4) | |
291 | gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff) | r); | |
292 | else | |
293 | gl520_write_value(client, reg, r); | |
294 | ||
9a61bf63 | 295 | mutex_unlock(&data->update_lock); |
1da177e4 LT |
296 | return count; |
297 | } | |
298 | ||
299 | static ssize_t set_in_max(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) | |
300 | { | |
301 | long v = simple_strtol(buf, NULL, 10); | |
302 | u8 r; | |
303 | ||
304 | if (n == 0) | |
305 | r = VDD_TO_REG(v); | |
306 | else | |
307 | r = IN_TO_REG(v); | |
308 | ||
9a61bf63 | 309 | mutex_lock(&data->update_lock); |
1da177e4 LT |
310 | |
311 | data->in_max[n] = r; | |
312 | ||
313 | if (n < 4) | |
314 | gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff00) | (r << 8)); | |
315 | else | |
316 | gl520_write_value(client, reg, r); | |
317 | ||
9a61bf63 | 318 | mutex_unlock(&data->update_lock); |
1da177e4 LT |
319 | return count; |
320 | } | |
321 | ||
322 | #define DIV_FROM_REG(val) (1 << (val)) | |
323 | #define FAN_FROM_REG(val,div) ((val)==0 ? 0 : (480000/((val) << (div)))) | |
324 | #define FAN_TO_REG(val,div) ((val)<=0?0:SENSORS_LIMIT((480000 + ((val) << ((div)-1))) / ((val) << (div)), 1, 255)); | |
325 | ||
326 | static ssize_t get_fan_input(struct gl520_data *data, char *buf, int n) | |
327 | { | |
328 | return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_input[n - 1], data->fan_div[n - 1])); | |
329 | } | |
330 | ||
331 | static ssize_t get_fan_min(struct gl520_data *data, char *buf, int n) | |
332 | { | |
333 | return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[n - 1], data->fan_div[n - 1])); | |
334 | } | |
335 | ||
336 | static ssize_t get_fan_div(struct gl520_data *data, char *buf, int n) | |
337 | { | |
338 | return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[n - 1])); | |
339 | } | |
340 | ||
341 | static ssize_t get_fan_off(struct gl520_data *data, char *buf, int n) | |
342 | { | |
343 | return sprintf(buf, "%d\n", data->fan_off); | |
344 | } | |
345 | ||
346 | static ssize_t set_fan_min(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) | |
347 | { | |
348 | unsigned long v = simple_strtoul(buf, NULL, 10); | |
349 | u8 r; | |
350 | ||
9a61bf63 | 351 | mutex_lock(&data->update_lock); |
1da177e4 LT |
352 | r = FAN_TO_REG(v, data->fan_div[n - 1]); |
353 | data->fan_min[n - 1] = r; | |
354 | ||
355 | if (n == 1) | |
356 | gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff00) | (r << 8)); | |
357 | else | |
358 | gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff) | r); | |
359 | ||
360 | data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK); | |
361 | if (data->fan_min[n - 1] == 0) | |
362 | data->alarm_mask &= (n == 1) ? ~0x20 : ~0x40; | |
363 | else | |
364 | data->alarm_mask |= (n == 1) ? 0x20 : 0x40; | |
365 | data->beep_mask &= data->alarm_mask; | |
366 | gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask); | |
367 | ||
9a61bf63 | 368 | mutex_unlock(&data->update_lock); |
1da177e4 LT |
369 | return count; |
370 | } | |
371 | ||
372 | static ssize_t set_fan_div(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) | |
373 | { | |
374 | unsigned long v = simple_strtoul(buf, NULL, 10); | |
375 | u8 r; | |
376 | ||
377 | switch (v) { | |
378 | case 1: r = 0; break; | |
379 | case 2: r = 1; break; | |
380 | case 4: r = 2; break; | |
381 | case 8: r = 3; break; | |
382 | default: | |
383 | dev_err(&client->dev, "fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n", v); | |
384 | return -EINVAL; | |
385 | } | |
386 | ||
9a61bf63 | 387 | mutex_lock(&data->update_lock); |
1da177e4 LT |
388 | data->fan_div[n - 1] = r; |
389 | ||
390 | if (n == 1) | |
391 | gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xc0) | (r << 6)); | |
392 | else | |
393 | gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x30) | (r << 4)); | |
394 | ||
9a61bf63 | 395 | mutex_unlock(&data->update_lock); |
1da177e4 LT |
396 | return count; |
397 | } | |
398 | ||
399 | static ssize_t set_fan_off(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) | |
400 | { | |
401 | u8 r = simple_strtoul(buf, NULL, 10)?1:0; | |
402 | ||
9a61bf63 | 403 | mutex_lock(&data->update_lock); |
1da177e4 LT |
404 | data->fan_off = r; |
405 | gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x0c) | (r << 2)); | |
9a61bf63 | 406 | mutex_unlock(&data->update_lock); |
1da177e4 LT |
407 | return count; |
408 | } | |
409 | ||
410 | #define TEMP_FROM_REG(val) (((val) - 130) * 1000) | |
411 | #define TEMP_TO_REG(val) (SENSORS_LIMIT(((((val)<0?(val)-500:(val)+500) / 1000)+130),0,255)) | |
412 | ||
413 | static ssize_t get_temp_input(struct gl520_data *data, char *buf, int n) | |
414 | { | |
415 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_input[n - 1])); | |
416 | } | |
417 | ||
418 | static ssize_t get_temp_max(struct gl520_data *data, char *buf, int n) | |
419 | { | |
420 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[n - 1])); | |
421 | } | |
422 | ||
423 | static ssize_t get_temp_max_hyst(struct gl520_data *data, char *buf, int n) | |
424 | { | |
425 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max_hyst[n - 1])); | |
426 | } | |
427 | ||
428 | static ssize_t set_temp_max(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) | |
429 | { | |
430 | long v = simple_strtol(buf, NULL, 10); | |
431 | ||
9a61bf63 | 432 | mutex_lock(&data->update_lock); |
53b3531b | 433 | data->temp_max[n - 1] = TEMP_TO_REG(v); |
1da177e4 | 434 | gl520_write_value(client, reg, data->temp_max[n - 1]); |
9a61bf63 | 435 | mutex_unlock(&data->update_lock); |
1da177e4 LT |
436 | return count; |
437 | } | |
438 | ||
439 | static ssize_t set_temp_max_hyst(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) | |
440 | { | |
441 | long v = simple_strtol(buf, NULL, 10); | |
442 | ||
9a61bf63 | 443 | mutex_lock(&data->update_lock); |
1da177e4 LT |
444 | data->temp_max_hyst[n - 1] = TEMP_TO_REG(v); |
445 | gl520_write_value(client, reg, data->temp_max_hyst[n - 1]); | |
9a61bf63 | 446 | mutex_unlock(&data->update_lock); |
1da177e4 LT |
447 | return count; |
448 | } | |
449 | ||
450 | static ssize_t get_alarms(struct gl520_data *data, char *buf, int n) | |
451 | { | |
452 | return sprintf(buf, "%d\n", data->alarms); | |
453 | } | |
454 | ||
455 | static ssize_t get_beep_enable(struct gl520_data *data, char *buf, int n) | |
456 | { | |
457 | return sprintf(buf, "%d\n", data->beep_enable); | |
458 | } | |
459 | ||
460 | static ssize_t get_beep_mask(struct gl520_data *data, char *buf, int n) | |
461 | { | |
462 | return sprintf(buf, "%d\n", data->beep_mask); | |
463 | } | |
464 | ||
465 | static ssize_t set_beep_enable(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) | |
466 | { | |
467 | u8 r = simple_strtoul(buf, NULL, 10)?0:1; | |
468 | ||
9a61bf63 | 469 | mutex_lock(&data->update_lock); |
1da177e4 LT |
470 | data->beep_enable = !r; |
471 | gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x04) | (r << 2)); | |
9a61bf63 | 472 | mutex_unlock(&data->update_lock); |
1da177e4 LT |
473 | return count; |
474 | } | |
475 | ||
476 | static ssize_t set_beep_mask(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) | |
477 | { | |
478 | u8 r = simple_strtoul(buf, NULL, 10); | |
f28dc2f7 | 479 | |
9a61bf63 | 480 | mutex_lock(&data->update_lock); |
1da177e4 LT |
481 | r &= data->alarm_mask; |
482 | data->beep_mask = r; | |
483 | gl520_write_value(client, reg, r); | |
9a61bf63 | 484 | mutex_unlock(&data->update_lock); |
1da177e4 LT |
485 | return count; |
486 | } | |
487 | ||
87808be4 JD |
488 | static struct attribute *gl520_attributes[] = { |
489 | &dev_attr_cpu0_vid.attr, | |
490 | ||
491 | &dev_attr_in0_input.attr, | |
492 | &dev_attr_in0_min.attr, | |
493 | &dev_attr_in0_max.attr, | |
494 | &dev_attr_in1_input.attr, | |
495 | &dev_attr_in1_min.attr, | |
496 | &dev_attr_in1_max.attr, | |
497 | &dev_attr_in2_input.attr, | |
498 | &dev_attr_in2_min.attr, | |
499 | &dev_attr_in2_max.attr, | |
500 | &dev_attr_in3_input.attr, | |
501 | &dev_attr_in3_min.attr, | |
502 | &dev_attr_in3_max.attr, | |
503 | ||
504 | &dev_attr_fan1_input.attr, | |
505 | &dev_attr_fan1_min.attr, | |
506 | &dev_attr_fan1_div.attr, | |
507 | &dev_attr_fan1_off.attr, | |
508 | &dev_attr_fan2_input.attr, | |
509 | &dev_attr_fan2_min.attr, | |
510 | &dev_attr_fan2_div.attr, | |
511 | ||
512 | &dev_attr_temp1_input.attr, | |
513 | &dev_attr_temp1_max.attr, | |
514 | &dev_attr_temp1_max_hyst.attr, | |
515 | ||
516 | &dev_attr_alarms.attr, | |
517 | &dev_attr_beep_enable.attr, | |
518 | &dev_attr_beep_mask.attr, | |
519 | NULL | |
520 | }; | |
521 | ||
522 | static const struct attribute_group gl520_group = { | |
523 | .attrs = gl520_attributes, | |
524 | }; | |
525 | ||
526 | static struct attribute *gl520_attributes_opt[] = { | |
527 | &dev_attr_in4_input.attr, | |
528 | &dev_attr_in4_min.attr, | |
529 | &dev_attr_in4_max.attr, | |
530 | ||
531 | &dev_attr_temp2_input.attr, | |
532 | &dev_attr_temp2_max.attr, | |
533 | &dev_attr_temp2_max_hyst.attr, | |
534 | NULL | |
535 | }; | |
536 | ||
537 | static const struct attribute_group gl520_group_opt = { | |
538 | .attrs = gl520_attributes_opt, | |
539 | }; | |
540 | ||
1da177e4 LT |
541 | |
542 | /* | |
543 | * Real code | |
544 | */ | |
545 | ||
546 | static int gl520_attach_adapter(struct i2c_adapter *adapter) | |
547 | { | |
548 | if (!(adapter->class & I2C_CLASS_HWMON)) | |
549 | return 0; | |
2ed2dc3c | 550 | return i2c_probe(adapter, &addr_data, gl520_detect); |
1da177e4 LT |
551 | } |
552 | ||
553 | static int gl520_detect(struct i2c_adapter *adapter, int address, int kind) | |
554 | { | |
f28dc2f7 | 555 | struct i2c_client *client; |
1da177e4 LT |
556 | struct gl520_data *data; |
557 | int err = 0; | |
558 | ||
559 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | | |
560 | I2C_FUNC_SMBUS_WORD_DATA)) | |
561 | goto exit; | |
562 | ||
563 | /* OK. For now, we presume we have a valid client. We now create the | |
564 | client structure, even though we cannot fill it completely yet. | |
565 | But it allows us to access gl520_{read,write}_value. */ | |
566 | ||
ba9c2e8d | 567 | if (!(data = kzalloc(sizeof(struct gl520_data), GFP_KERNEL))) { |
1da177e4 LT |
568 | err = -ENOMEM; |
569 | goto exit; | |
570 | } | |
1da177e4 | 571 | |
f28dc2f7 JD |
572 | client = &data->client; |
573 | i2c_set_clientdata(client, data); | |
574 | client->addr = address; | |
575 | client->adapter = adapter; | |
576 | client->driver = &gl520_driver; | |
1da177e4 LT |
577 | |
578 | /* Determine the chip type. */ | |
579 | if (kind < 0) { | |
f28dc2f7 JD |
580 | if ((gl520_read_value(client, GL520_REG_CHIP_ID) != 0x20) || |
581 | ((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) || | |
582 | ((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) { | |
583 | dev_dbg(&client->dev, "Unknown chip type, skipping\n"); | |
1da177e4 LT |
584 | goto exit_free; |
585 | } | |
586 | } | |
587 | ||
588 | /* Fill in the remaining client fields */ | |
f28dc2f7 | 589 | strlcpy(client->name, "gl520sm", I2C_NAME_SIZE); |
9a61bf63 | 590 | mutex_init(&data->update_lock); |
1da177e4 LT |
591 | |
592 | /* Tell the I2C layer a new client has arrived */ | |
f28dc2f7 | 593 | if ((err = i2c_attach_client(client))) |
1da177e4 LT |
594 | goto exit_free; |
595 | ||
596 | /* Initialize the GL520SM chip */ | |
f28dc2f7 | 597 | gl520_init_client(client); |
1da177e4 LT |
598 | |
599 | /* Register sysfs hooks */ | |
f28dc2f7 | 600 | if ((err = sysfs_create_group(&client->dev.kobj, &gl520_group))) |
943b0830 | 601 | goto exit_detach; |
1da177e4 | 602 | |
87808be4 | 603 | if (data->two_temps) { |
f28dc2f7 | 604 | if ((err = device_create_file(&client->dev, |
87808be4 | 605 | &dev_attr_temp2_input)) |
f28dc2f7 | 606 | || (err = device_create_file(&client->dev, |
87808be4 | 607 | &dev_attr_temp2_max)) |
f28dc2f7 | 608 | || (err = device_create_file(&client->dev, |
87808be4 JD |
609 | &dev_attr_temp2_max_hyst))) |
610 | goto exit_remove_files; | |
611 | } else { | |
f28dc2f7 | 612 | if ((err = device_create_file(&client->dev, |
87808be4 | 613 | &dev_attr_in4_input)) |
f28dc2f7 | 614 | || (err = device_create_file(&client->dev, |
87808be4 | 615 | &dev_attr_in4_min)) |
f28dc2f7 | 616 | || (err = device_create_file(&client->dev, |
87808be4 JD |
617 | &dev_attr_in4_max))) |
618 | goto exit_remove_files; | |
619 | } | |
1da177e4 | 620 | |
1da177e4 | 621 | |
f28dc2f7 | 622 | data->hwmon_dev = hwmon_device_register(&client->dev); |
1beeffe4 TJ |
623 | if (IS_ERR(data->hwmon_dev)) { |
624 | err = PTR_ERR(data->hwmon_dev); | |
87808be4 JD |
625 | goto exit_remove_files; |
626 | } | |
1da177e4 LT |
627 | |
628 | return 0; | |
629 | ||
87808be4 | 630 | exit_remove_files: |
f28dc2f7 JD |
631 | sysfs_remove_group(&client->dev.kobj, &gl520_group); |
632 | sysfs_remove_group(&client->dev.kobj, &gl520_group_opt); | |
943b0830 | 633 | exit_detach: |
f28dc2f7 | 634 | i2c_detach_client(client); |
1da177e4 LT |
635 | exit_free: |
636 | kfree(data); | |
637 | exit: | |
638 | return err; | |
639 | } | |
640 | ||
641 | ||
642 | /* Called when we have found a new GL520SM. */ | |
643 | static void gl520_init_client(struct i2c_client *client) | |
644 | { | |
645 | struct gl520_data *data = i2c_get_clientdata(client); | |
646 | u8 oldconf, conf; | |
647 | ||
648 | conf = oldconf = gl520_read_value(client, GL520_REG_CONF); | |
649 | ||
650 | data->alarm_mask = 0xff; | |
303760b4 | 651 | data->vrm = vid_which_vrm(); |
1da177e4 LT |
652 | |
653 | if (extra_sensor_type == 1) | |
654 | conf &= ~0x10; | |
655 | else if (extra_sensor_type == 2) | |
656 | conf |= 0x10; | |
657 | data->two_temps = !(conf & 0x10); | |
658 | ||
659 | /* If IRQ# is disabled, we can safely force comparator mode */ | |
660 | if (!(conf & 0x20)) | |
661 | conf &= 0xf7; | |
662 | ||
663 | /* Enable monitoring if needed */ | |
664 | conf |= 0x40; | |
665 | ||
666 | if (conf != oldconf) | |
667 | gl520_write_value(client, GL520_REG_CONF, conf); | |
668 | ||
669 | gl520_update_device(&(client->dev)); | |
670 | ||
671 | if (data->fan_min[0] == 0) | |
672 | data->alarm_mask &= ~0x20; | |
673 | if (data->fan_min[1] == 0) | |
674 | data->alarm_mask &= ~0x40; | |
675 | ||
676 | data->beep_mask &= data->alarm_mask; | |
677 | gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask); | |
678 | } | |
679 | ||
680 | static int gl520_detach_client(struct i2c_client *client) | |
681 | { | |
943b0830 | 682 | struct gl520_data *data = i2c_get_clientdata(client); |
1da177e4 LT |
683 | int err; |
684 | ||
1beeffe4 | 685 | hwmon_device_unregister(data->hwmon_dev); |
87808be4 JD |
686 | sysfs_remove_group(&client->dev.kobj, &gl520_group); |
687 | sysfs_remove_group(&client->dev.kobj, &gl520_group_opt); | |
943b0830 | 688 | |
7bef5594 | 689 | if ((err = i2c_detach_client(client))) |
1da177e4 | 690 | return err; |
1da177e4 | 691 | |
943b0830 | 692 | kfree(data); |
1da177e4 LT |
693 | return 0; |
694 | } | |
695 | ||
696 | ||
f28dc2f7 | 697 | /* Registers 0x07 to 0x0c are word-sized, others are byte-sized |
1da177e4 LT |
698 | GL520 uses a high-byte first convention */ |
699 | static int gl520_read_value(struct i2c_client *client, u8 reg) | |
700 | { | |
701 | if ((reg >= 0x07) && (reg <= 0x0c)) | |
702 | return swab16(i2c_smbus_read_word_data(client, reg)); | |
703 | else | |
704 | return i2c_smbus_read_byte_data(client, reg); | |
705 | } | |
706 | ||
707 | static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value) | |
708 | { | |
709 | if ((reg >= 0x07) && (reg <= 0x0c)) | |
710 | return i2c_smbus_write_word_data(client, reg, swab16(value)); | |
711 | else | |
712 | return i2c_smbus_write_byte_data(client, reg, value); | |
713 | } | |
714 | ||
715 | ||
716 | static struct gl520_data *gl520_update_device(struct device *dev) | |
717 | { | |
718 | struct i2c_client *client = to_i2c_client(dev); | |
719 | struct gl520_data *data = i2c_get_clientdata(client); | |
720 | int val; | |
721 | ||
9a61bf63 | 722 | mutex_lock(&data->update_lock); |
1da177e4 | 723 | |
0cacdf29 | 724 | if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { |
1da177e4 LT |
725 | |
726 | dev_dbg(&client->dev, "Starting gl520sm update\n"); | |
727 | ||
728 | data->alarms = gl520_read_value(client, GL520_REG_ALARMS); | |
729 | data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK); | |
730 | data->vid = gl520_read_value(client, GL520_REG_VID_INPUT) & 0x1f; | |
731 | ||
732 | val = gl520_read_value(client, GL520_REG_IN0_LIMIT); | |
733 | data->in_min[0] = val & 0xff; | |
734 | data->in_max[0] = (val >> 8) & 0xff; | |
735 | val = gl520_read_value(client, GL520_REG_IN1_LIMIT); | |
736 | data->in_min[1] = val & 0xff; | |
737 | data->in_max[1] = (val >> 8) & 0xff; | |
738 | val = gl520_read_value(client, GL520_REG_IN2_LIMIT); | |
739 | data->in_min[2] = val & 0xff; | |
740 | data->in_max[2] = (val >> 8) & 0xff; | |
741 | val = gl520_read_value(client, GL520_REG_IN3_LIMIT); | |
742 | data->in_min[3] = val & 0xff; | |
743 | data->in_max[3] = (val >> 8) & 0xff; | |
744 | ||
745 | val = gl520_read_value(client, GL520_REG_FAN_INPUT); | |
746 | data->fan_input[0] = (val >> 8) & 0xff; | |
747 | data->fan_input[1] = val & 0xff; | |
748 | ||
749 | val = gl520_read_value(client, GL520_REG_FAN_MIN); | |
750 | data->fan_min[0] = (val >> 8) & 0xff; | |
751 | data->fan_min[1] = val & 0xff; | |
752 | ||
753 | data->temp_input[0] = gl520_read_value(client, GL520_REG_TEMP1_INPUT); | |
754 | data->temp_max[0] = gl520_read_value(client, GL520_REG_TEMP1_MAX); | |
755 | data->temp_max_hyst[0] = gl520_read_value(client, GL520_REG_TEMP1_MAX_HYST); | |
756 | ||
757 | val = gl520_read_value(client, GL520_REG_FAN_DIV); | |
758 | data->fan_div[0] = (val >> 6) & 0x03; | |
759 | data->fan_div[1] = (val >> 4) & 0x03; | |
760 | data->fan_off = (val >> 2) & 0x01; | |
761 | ||
762 | data->alarms &= data->alarm_mask; | |
763 | ||
764 | val = gl520_read_value(client, GL520_REG_CONF); | |
765 | data->beep_enable = !((val >> 2) & 1); | |
766 | ||
767 | data->in_input[0] = gl520_read_value(client, GL520_REG_IN0_INPUT); | |
768 | data->in_input[1] = gl520_read_value(client, GL520_REG_IN1_INPUT); | |
769 | data->in_input[2] = gl520_read_value(client, GL520_REG_IN2_INPUT); | |
770 | data->in_input[3] = gl520_read_value(client, GL520_REG_IN3_INPUT); | |
771 | ||
772 | /* Temp1 and Vin4 are the same input */ | |
773 | if (data->two_temps) { | |
774 | data->temp_input[1] = gl520_read_value(client, GL520_REG_TEMP2_INPUT); | |
775 | data->temp_max[1] = gl520_read_value(client, GL520_REG_TEMP2_MAX); | |
776 | data->temp_max_hyst[1] = gl520_read_value(client, GL520_REG_TEMP2_MAX_HYST); | |
777 | } else { | |
778 | data->in_input[4] = gl520_read_value(client, GL520_REG_IN4_INPUT); | |
779 | data->in_min[4] = gl520_read_value(client, GL520_REG_IN4_MIN); | |
780 | data->in_max[4] = gl520_read_value(client, GL520_REG_IN4_MAX); | |
781 | } | |
782 | ||
783 | data->last_updated = jiffies; | |
784 | data->valid = 1; | |
785 | } | |
786 | ||
9a61bf63 | 787 | mutex_unlock(&data->update_lock); |
1da177e4 LT |
788 | |
789 | return data; | |
790 | } | |
791 | ||
792 | ||
793 | static int __init sensors_gl520sm_init(void) | |
794 | { | |
795 | return i2c_add_driver(&gl520_driver); | |
796 | } | |
797 | ||
798 | static void __exit sensors_gl520sm_exit(void) | |
799 | { | |
800 | i2c_del_driver(&gl520_driver); | |
801 | } | |
802 | ||
803 | ||
804 | MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " | |
96de0e25 | 805 | "Kyösti Mälkki <kmalkki@cc.hut.fi>, " |
1da177e4 LT |
806 | "Maarten Deprez <maartendeprez@users.sourceforge.net>"); |
807 | MODULE_DESCRIPTION("GL520SM driver"); | |
808 | MODULE_LICENSE("GPL"); | |
809 | ||
810 | module_init(sensors_gl520sm_init); | |
811 | module_exit(sensors_gl520sm_exit); |