Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * lm80.c - From lm_sensors, Linux kernel modules for hardware | |
3 | * monitoring | |
4 | * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> | |
5 | * and Philip Edelbrock <phil@netroedge.com> | |
6 | * | |
7 | * Ported to Linux 2.6 by Tiago Sousa <mirage@kaotik.org> | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or modify | |
10 | * it under the terms of the GNU General Public License as published by | |
11 | * the Free Software Foundation; either version 2 of the License, or | |
12 | * (at your option) any later version. | |
13 | * | |
14 | * This program is distributed in the hope that it will be useful, | |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | * GNU General Public License for more details. | |
18 | * | |
19 | * You should have received a copy of the GNU General Public License | |
20 | * along with this program; if not, write to the Free Software | |
21 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
22 | */ | |
23 | ||
1da177e4 LT |
24 | #include <linux/module.h> |
25 | #include <linux/init.h> | |
26 | #include <linux/slab.h> | |
27 | #include <linux/jiffies.h> | |
28 | #include <linux/i2c.h> | |
943b0830 | 29 | #include <linux/hwmon.h> |
f8181762 | 30 | #include <linux/hwmon-sysfs.h> |
943b0830 | 31 | #include <linux/err.h> |
9a61bf63 | 32 | #include <linux/mutex.h> |
1da177e4 LT |
33 | |
34 | /* Addresses to scan */ | |
25e9c86d MH |
35 | static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, |
36 | 0x2e, 0x2f, I2C_CLIENT_END }; | |
1da177e4 | 37 | |
1da177e4 LT |
38 | /* Many LM80 constants specified below */ |
39 | ||
40 | /* The LM80 registers */ | |
41 | #define LM80_REG_IN_MAX(nr) (0x2a + (nr) * 2) | |
42 | #define LM80_REG_IN_MIN(nr) (0x2b + (nr) * 2) | |
43 | #define LM80_REG_IN(nr) (0x20 + (nr)) | |
44 | ||
45 | #define LM80_REG_FAN1 0x28 | |
46 | #define LM80_REG_FAN2 0x29 | |
47 | #define LM80_REG_FAN_MIN(nr) (0x3b + (nr)) | |
48 | ||
49 | #define LM80_REG_TEMP 0x27 | |
50 | #define LM80_REG_TEMP_HOT_MAX 0x38 | |
51 | #define LM80_REG_TEMP_HOT_HYST 0x39 | |
52 | #define LM80_REG_TEMP_OS_MAX 0x3a | |
53 | #define LM80_REG_TEMP_OS_HYST 0x3b | |
54 | ||
55 | #define LM80_REG_CONFIG 0x00 | |
56 | #define LM80_REG_ALARM1 0x01 | |
57 | #define LM80_REG_ALARM2 0x02 | |
58 | #define LM80_REG_MASK1 0x03 | |
59 | #define LM80_REG_MASK2 0x04 | |
60 | #define LM80_REG_FANDIV 0x05 | |
61 | #define LM80_REG_RES 0x06 | |
62 | ||
63 | ||
64 | /* Conversions. Rounding and limit checking is only done on the TO_REG | |
65 | variants. Note that you should be a bit careful with which arguments | |
66 | these macros are called: arguments may be evaluated more than once. | |
67 | Fixing this is just not worth it. */ | |
68 | ||
66b3b1f7 FM |
69 | #define IN_TO_REG(val) (SENSORS_LIMIT(((val) + 5) / 10, 0, 255)) |
70 | #define IN_FROM_REG(val) ((val) * 10) | |
1da177e4 LT |
71 | |
72 | static inline unsigned char FAN_TO_REG(unsigned rpm, unsigned div) | |
73 | { | |
74 | if (rpm == 0) | |
75 | return 255; | |
76 | rpm = SENSORS_LIMIT(rpm, 1, 1000000); | |
66b3b1f7 | 77 | return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); |
1da177e4 LT |
78 | } |
79 | ||
66b3b1f7 FM |
80 | #define FAN_FROM_REG(val, div) ((val) == 0 ? -1 : \ |
81 | (val) == 255 ? 0 : 1350000/((div) * (val))) | |
1da177e4 LT |
82 | |
83 | static inline long TEMP_FROM_REG(u16 temp) | |
84 | { | |
85 | long res; | |
86 | ||
87 | temp >>= 4; | |
88 | if (temp < 0x0800) | |
89 | res = 625 * (long) temp; | |
90 | else | |
91 | res = ((long) temp - 0x01000) * 625; | |
92 | ||
93 | return res / 10; | |
94 | } | |
95 | ||
66b3b1f7 FM |
96 | #define TEMP_LIMIT_FROM_REG(val) (((val) > 0x80 ? \ |
97 | (val) - 0x100 : (val)) * 1000) | |
1da177e4 | 98 | |
66b3b1f7 FM |
99 | #define TEMP_LIMIT_TO_REG(val) SENSORS_LIMIT((val) < 0 ? \ |
100 | ((val) - 500) / 1000 : ((val) + 500) / 1000, 0, 255) | |
1da177e4 LT |
101 | |
102 | #define DIV_FROM_REG(val) (1 << (val)) | |
103 | ||
104 | /* | |
105 | * Client data (each client gets its own) | |
106 | */ | |
107 | ||
108 | struct lm80_data { | |
1beeffe4 | 109 | struct device *hwmon_dev; |
9a61bf63 | 110 | struct mutex update_lock; |
1da177e4 LT |
111 | char valid; /* !=0 if following fields are valid */ |
112 | unsigned long last_updated; /* In jiffies */ | |
113 | ||
114 | u8 in[7]; /* Register value */ | |
115 | u8 in_max[7]; /* Register value */ | |
116 | u8 in_min[7]; /* Register value */ | |
117 | u8 fan[2]; /* Register value */ | |
118 | u8 fan_min[2]; /* Register value */ | |
119 | u8 fan_div[2]; /* Register encoding, shifted right */ | |
120 | u16 temp; /* Register values, shifted right */ | |
121 | u8 temp_hot_max; /* Register value */ | |
122 | u8 temp_hot_hyst; /* Register value */ | |
123 | u8 temp_os_max; /* Register value */ | |
124 | u8 temp_os_hyst; /* Register value */ | |
125 | u16 alarms; /* Register encoding, combined */ | |
126 | }; | |
127 | ||
6cc37ee5 | 128 | /* |
1da177e4 LT |
129 | * Functions declaration |
130 | */ | |
131 | ||
8c8bacc8 JD |
132 | static int lm80_probe(struct i2c_client *client, |
133 | const struct i2c_device_id *id); | |
310ec792 | 134 | static int lm80_detect(struct i2c_client *client, struct i2c_board_info *info); |
1da177e4 | 135 | static void lm80_init_client(struct i2c_client *client); |
8c8bacc8 | 136 | static int lm80_remove(struct i2c_client *client); |
1da177e4 LT |
137 | static struct lm80_data *lm80_update_device(struct device *dev); |
138 | static int lm80_read_value(struct i2c_client *client, u8 reg); | |
139 | static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value); | |
140 | ||
141 | /* | |
142 | * Driver data (common to all clients) | |
143 | */ | |
144 | ||
8c8bacc8 | 145 | static const struct i2c_device_id lm80_id[] = { |
1f86df49 | 146 | { "lm80", 0 }, |
8c8bacc8 JD |
147 | { } |
148 | }; | |
149 | MODULE_DEVICE_TABLE(i2c, lm80_id); | |
150 | ||
1da177e4 | 151 | static struct i2c_driver lm80_driver = { |
8c8bacc8 | 152 | .class = I2C_CLASS_HWMON, |
cdaf7934 | 153 | .driver = { |
cdaf7934 LR |
154 | .name = "lm80", |
155 | }, | |
8c8bacc8 JD |
156 | .probe = lm80_probe, |
157 | .remove = lm80_remove, | |
158 | .id_table = lm80_id, | |
159 | .detect = lm80_detect, | |
c3813d6a | 160 | .address_list = normal_i2c, |
1da177e4 LT |
161 | }; |
162 | ||
163 | /* | |
164 | * Sysfs stuff | |
165 | */ | |
166 | ||
167 | #define show_in(suffix, value) \ | |
66b3b1f7 FM |
168 | static ssize_t show_in_##suffix(struct device *dev, \ |
169 | struct device_attribute *attr, char *buf) \ | |
1da177e4 | 170 | { \ |
f8181762 | 171 | int nr = to_sensor_dev_attr(attr)->index; \ |
1da177e4 | 172 | struct lm80_data *data = lm80_update_device(dev); \ |
f8181762 | 173 | return sprintf(buf, "%d\n", IN_FROM_REG(data->value[nr])); \ |
1da177e4 | 174 | } |
f8181762 JD |
175 | show_in(min, in_min) |
176 | show_in(max, in_max) | |
177 | show_in(input, in) | |
1da177e4 LT |
178 | |
179 | #define set_in(suffix, value, reg) \ | |
66b3b1f7 FM |
180 | static ssize_t set_in_##suffix(struct device *dev, \ |
181 | struct device_attribute *attr, const char *buf, size_t count) \ | |
1da177e4 | 182 | { \ |
f8181762 | 183 | int nr = to_sensor_dev_attr(attr)->index; \ |
1da177e4 LT |
184 | struct i2c_client *client = to_i2c_client(dev); \ |
185 | struct lm80_data *data = i2c_get_clientdata(client); \ | |
186 | long val = simple_strtol(buf, NULL, 10); \ | |
66b3b1f7 | 187 | \ |
9a61bf63 | 188 | mutex_lock(&data->update_lock);\ |
f8181762 JD |
189 | data->value[nr] = IN_TO_REG(val); \ |
190 | lm80_write_value(client, reg(nr), data->value[nr]); \ | |
9a61bf63 | 191 | mutex_unlock(&data->update_lock);\ |
1da177e4 LT |
192 | return count; \ |
193 | } | |
f8181762 JD |
194 | set_in(min, in_min, LM80_REG_IN_MIN) |
195 | set_in(max, in_max, LM80_REG_IN_MAX) | |
196 | ||
197 | #define show_fan(suffix, value) \ | |
66b3b1f7 FM |
198 | static ssize_t show_fan_##suffix(struct device *dev, \ |
199 | struct device_attribute *attr, char *buf) \ | |
1da177e4 | 200 | { \ |
f8181762 | 201 | int nr = to_sensor_dev_attr(attr)->index; \ |
1da177e4 | 202 | struct lm80_data *data = lm80_update_device(dev); \ |
f8181762 JD |
203 | return sprintf(buf, "%d\n", FAN_FROM_REG(data->value[nr], \ |
204 | DIV_FROM_REG(data->fan_div[nr]))); \ | |
1da177e4 | 205 | } |
f8181762 JD |
206 | show_fan(min, fan_min) |
207 | show_fan(input, fan) | |
1da177e4 | 208 | |
f8181762 JD |
209 | static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr, |
210 | char *buf) | |
211 | { | |
212 | int nr = to_sensor_dev_attr(attr)->index; | |
213 | struct lm80_data *data = lm80_update_device(dev); | |
214 | return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr])); | |
1da177e4 | 215 | } |
1da177e4 | 216 | |
f8181762 JD |
217 | static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, |
218 | const char *buf, size_t count) | |
219 | { | |
220 | int nr = to_sensor_dev_attr(attr)->index; | |
221 | struct i2c_client *client = to_i2c_client(dev); | |
222 | struct lm80_data *data = i2c_get_clientdata(client); | |
223 | long val = simple_strtoul(buf, NULL, 10); | |
224 | ||
225 | mutex_lock(&data->update_lock); | |
226 | data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); | |
227 | lm80_write_value(client, LM80_REG_FAN_MIN(nr + 1), data->fan_min[nr]); | |
228 | mutex_unlock(&data->update_lock); | |
229 | return count; | |
1da177e4 | 230 | } |
1da177e4 LT |
231 | |
232 | /* Note: we save and restore the fan minimum here, because its value is | |
233 | determined in part by the fan divisor. This follows the principle of | |
d6e05edc | 234 | least surprise; the user doesn't expect the fan minimum to change just |
1da177e4 | 235 | because the divisor changed. */ |
f8181762 JD |
236 | static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, |
237 | const char *buf, size_t count) | |
1da177e4 | 238 | { |
f8181762 | 239 | int nr = to_sensor_dev_attr(attr)->index; |
1da177e4 LT |
240 | struct i2c_client *client = to_i2c_client(dev); |
241 | struct lm80_data *data = i2c_get_clientdata(client); | |
242 | unsigned long min, val = simple_strtoul(buf, NULL, 10); | |
243 | u8 reg; | |
244 | ||
245 | /* Save fan_min */ | |
9a61bf63 | 246 | mutex_lock(&data->update_lock); |
1da177e4 LT |
247 | min = FAN_FROM_REG(data->fan_min[nr], |
248 | DIV_FROM_REG(data->fan_div[nr])); | |
249 | ||
250 | switch (val) { | |
66b3b1f7 FM |
251 | case 1: |
252 | data->fan_div[nr] = 0; | |
253 | break; | |
254 | case 2: | |
255 | data->fan_div[nr] = 1; | |
256 | break; | |
257 | case 4: | |
258 | data->fan_div[nr] = 2; | |
259 | break; | |
260 | case 8: | |
261 | data->fan_div[nr] = 3; | |
262 | break; | |
1da177e4 LT |
263 | default: |
264 | dev_err(&client->dev, "fan_div value %ld not " | |
265 | "supported. Choose one of 1, 2, 4 or 8!\n", val); | |
9a61bf63 | 266 | mutex_unlock(&data->update_lock); |
1da177e4 LT |
267 | return -EINVAL; |
268 | } | |
269 | ||
270 | reg = (lm80_read_value(client, LM80_REG_FANDIV) & ~(3 << (2 * (nr + 1)))) | |
271 | | (data->fan_div[nr] << (2 * (nr + 1))); | |
272 | lm80_write_value(client, LM80_REG_FANDIV, reg); | |
273 | ||
274 | /* Restore fan_min */ | |
275 | data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); | |
276 | lm80_write_value(client, LM80_REG_FAN_MIN(nr + 1), data->fan_min[nr]); | |
9a61bf63 | 277 | mutex_unlock(&data->update_lock); |
1da177e4 LT |
278 | |
279 | return count; | |
280 | } | |
281 | ||
66b3b1f7 FM |
282 | static ssize_t show_temp_input1(struct device *dev, |
283 | struct device_attribute *attr, char *buf) | |
1da177e4 LT |
284 | { |
285 | struct lm80_data *data = lm80_update_device(dev); | |
286 | return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp)); | |
287 | } | |
288 | ||
289 | #define show_temp(suffix, value) \ | |
66b3b1f7 FM |
290 | static ssize_t show_temp_##suffix(struct device *dev, \ |
291 | struct device_attribute *attr, char *buf) \ | |
1da177e4 LT |
292 | { \ |
293 | struct lm80_data *data = lm80_update_device(dev); \ | |
294 | return sprintf(buf, "%d\n", TEMP_LIMIT_FROM_REG(data->value)); \ | |
295 | } | |
296 | show_temp(hot_max, temp_hot_max); | |
297 | show_temp(hot_hyst, temp_hot_hyst); | |
298 | show_temp(os_max, temp_os_max); | |
299 | show_temp(os_hyst, temp_os_hyst); | |
300 | ||
301 | #define set_temp(suffix, value, reg) \ | |
66b3b1f7 FM |
302 | static ssize_t set_temp_##suffix(struct device *dev, \ |
303 | struct device_attribute *attr, const char *buf, size_t count) \ | |
1da177e4 LT |
304 | { \ |
305 | struct i2c_client *client = to_i2c_client(dev); \ | |
306 | struct lm80_data *data = i2c_get_clientdata(client); \ | |
307 | long val = simple_strtoul(buf, NULL, 10); \ | |
66b3b1f7 | 308 | \ |
9a61bf63 | 309 | mutex_lock(&data->update_lock); \ |
1da177e4 LT |
310 | data->value = TEMP_LIMIT_TO_REG(val); \ |
311 | lm80_write_value(client, reg, data->value); \ | |
9a61bf63 | 312 | mutex_unlock(&data->update_lock); \ |
1da177e4 LT |
313 | return count; \ |
314 | } | |
315 | set_temp(hot_max, temp_hot_max, LM80_REG_TEMP_HOT_MAX); | |
316 | set_temp(hot_hyst, temp_hot_hyst, LM80_REG_TEMP_HOT_HYST); | |
317 | set_temp(os_max, temp_os_max, LM80_REG_TEMP_OS_MAX); | |
318 | set_temp(os_hyst, temp_os_hyst, LM80_REG_TEMP_OS_HYST); | |
319 | ||
6cc37ee5 JD |
320 | static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, |
321 | char *buf) | |
1da177e4 LT |
322 | { |
323 | struct lm80_data *data = lm80_update_device(dev); | |
324 | return sprintf(buf, "%u\n", data->alarms); | |
325 | } | |
326 | ||
e84542f5 JD |
327 | static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, |
328 | char *buf) | |
329 | { | |
330 | int bitnr = to_sensor_dev_attr(attr)->index; | |
331 | struct lm80_data *data = lm80_update_device(dev); | |
332 | return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); | |
333 | } | |
334 | ||
f8181762 JD |
335 | static SENSOR_DEVICE_ATTR(in0_min, S_IWUSR | S_IRUGO, |
336 | show_in_min, set_in_min, 0); | |
337 | static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, | |
338 | show_in_min, set_in_min, 1); | |
339 | static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, | |
340 | show_in_min, set_in_min, 2); | |
341 | static SENSOR_DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO, | |
342 | show_in_min, set_in_min, 3); | |
343 | static SENSOR_DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO, | |
344 | show_in_min, set_in_min, 4); | |
345 | static SENSOR_DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO, | |
346 | show_in_min, set_in_min, 5); | |
347 | static SENSOR_DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO, | |
348 | show_in_min, set_in_min, 6); | |
349 | static SENSOR_DEVICE_ATTR(in0_max, S_IWUSR | S_IRUGO, | |
350 | show_in_max, set_in_max, 0); | |
351 | static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, | |
352 | show_in_max, set_in_max, 1); | |
353 | static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, | |
354 | show_in_max, set_in_max, 2); | |
355 | static SENSOR_DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO, | |
356 | show_in_max, set_in_max, 3); | |
357 | static SENSOR_DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO, | |
358 | show_in_max, set_in_max, 4); | |
359 | static SENSOR_DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO, | |
360 | show_in_max, set_in_max, 5); | |
361 | static SENSOR_DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO, | |
362 | show_in_max, set_in_max, 6); | |
363 | static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in_input, NULL, 0); | |
364 | static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in_input, NULL, 1); | |
365 | static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in_input, NULL, 2); | |
366 | static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in_input, NULL, 3); | |
367 | static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_in_input, NULL, 4); | |
368 | static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_in_input, NULL, 5); | |
369 | static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_in_input, NULL, 6); | |
370 | static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, | |
371 | show_fan_min, set_fan_min, 0); | |
372 | static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, | |
373 | show_fan_min, set_fan_min, 1); | |
374 | static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0); | |
375 | static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1); | |
376 | static SENSOR_DEVICE_ATTR(fan1_div, S_IWUSR | S_IRUGO, | |
377 | show_fan_div, set_fan_div, 0); | |
378 | static SENSOR_DEVICE_ATTR(fan2_div, S_IWUSR | S_IRUGO, | |
379 | show_fan_div, set_fan_div, 1); | |
1da177e4 LT |
380 | static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL); |
381 | static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_hot_max, | |
66b3b1f7 | 382 | set_temp_hot_max); |
1da177e4 | 383 | static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_temp_hot_hyst, |
66b3b1f7 | 384 | set_temp_hot_hyst); |
1da177e4 | 385 | static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp_os_max, |
66b3b1f7 | 386 | set_temp_os_max); |
1da177e4 | 387 | static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp_os_hyst, |
66b3b1f7 | 388 | set_temp_os_hyst); |
1da177e4 | 389 | static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); |
e84542f5 JD |
390 | static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); |
391 | static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); | |
392 | static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); | |
393 | static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); | |
394 | static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 4); | |
395 | static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 5); | |
396 | static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 6); | |
397 | static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 10); | |
398 | static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 11); | |
399 | static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 8); | |
400 | static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 13); | |
1da177e4 LT |
401 | |
402 | /* | |
403 | * Real code | |
404 | */ | |
405 | ||
0501a381 | 406 | static struct attribute *lm80_attributes[] = { |
f8181762 JD |
407 | &sensor_dev_attr_in0_min.dev_attr.attr, |
408 | &sensor_dev_attr_in1_min.dev_attr.attr, | |
409 | &sensor_dev_attr_in2_min.dev_attr.attr, | |
410 | &sensor_dev_attr_in3_min.dev_attr.attr, | |
411 | &sensor_dev_attr_in4_min.dev_attr.attr, | |
412 | &sensor_dev_attr_in5_min.dev_attr.attr, | |
413 | &sensor_dev_attr_in6_min.dev_attr.attr, | |
414 | &sensor_dev_attr_in0_max.dev_attr.attr, | |
415 | &sensor_dev_attr_in1_max.dev_attr.attr, | |
416 | &sensor_dev_attr_in2_max.dev_attr.attr, | |
417 | &sensor_dev_attr_in3_max.dev_attr.attr, | |
418 | &sensor_dev_attr_in4_max.dev_attr.attr, | |
419 | &sensor_dev_attr_in5_max.dev_attr.attr, | |
420 | &sensor_dev_attr_in6_max.dev_attr.attr, | |
421 | &sensor_dev_attr_in0_input.dev_attr.attr, | |
422 | &sensor_dev_attr_in1_input.dev_attr.attr, | |
423 | &sensor_dev_attr_in2_input.dev_attr.attr, | |
424 | &sensor_dev_attr_in3_input.dev_attr.attr, | |
425 | &sensor_dev_attr_in4_input.dev_attr.attr, | |
426 | &sensor_dev_attr_in5_input.dev_attr.attr, | |
427 | &sensor_dev_attr_in6_input.dev_attr.attr, | |
428 | &sensor_dev_attr_fan1_min.dev_attr.attr, | |
429 | &sensor_dev_attr_fan2_min.dev_attr.attr, | |
430 | &sensor_dev_attr_fan1_input.dev_attr.attr, | |
431 | &sensor_dev_attr_fan2_input.dev_attr.attr, | |
432 | &sensor_dev_attr_fan1_div.dev_attr.attr, | |
433 | &sensor_dev_attr_fan2_div.dev_attr.attr, | |
0501a381 MH |
434 | &dev_attr_temp1_input.attr, |
435 | &dev_attr_temp1_max.attr, | |
436 | &dev_attr_temp1_max_hyst.attr, | |
437 | &dev_attr_temp1_crit.attr, | |
438 | &dev_attr_temp1_crit_hyst.attr, | |
439 | &dev_attr_alarms.attr, | |
e84542f5 JD |
440 | &sensor_dev_attr_in0_alarm.dev_attr.attr, |
441 | &sensor_dev_attr_in1_alarm.dev_attr.attr, | |
442 | &sensor_dev_attr_in2_alarm.dev_attr.attr, | |
443 | &sensor_dev_attr_in3_alarm.dev_attr.attr, | |
444 | &sensor_dev_attr_in4_alarm.dev_attr.attr, | |
445 | &sensor_dev_attr_in5_alarm.dev_attr.attr, | |
446 | &sensor_dev_attr_in6_alarm.dev_attr.attr, | |
447 | &sensor_dev_attr_fan1_alarm.dev_attr.attr, | |
448 | &sensor_dev_attr_fan2_alarm.dev_attr.attr, | |
449 | &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, | |
450 | &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, | |
0501a381 MH |
451 | NULL |
452 | }; | |
453 | ||
454 | static const struct attribute_group lm80_group = { | |
455 | .attrs = lm80_attributes, | |
456 | }; | |
457 | ||
8c8bacc8 | 458 | /* Return 0 if detection is successful, -ENODEV otherwise */ |
310ec792 | 459 | static int lm80_detect(struct i2c_client *client, struct i2c_board_info *info) |
1da177e4 | 460 | { |
8c8bacc8 | 461 | struct i2c_adapter *adapter = client->adapter; |
1da177e4 | 462 | int i, cur; |
1da177e4 LT |
463 | |
464 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | |
8c8bacc8 | 465 | return -ENODEV; |
1da177e4 LT |
466 | |
467 | /* Now, we do the remaining detection. It is lousy. */ | |
6cc37ee5 | 468 | if (lm80_read_value(client, LM80_REG_ALARM2) & 0xc0) |
8c8bacc8 | 469 | return -ENODEV; |
1da177e4 | 470 | for (i = 0x2a; i <= 0x3d; i++) { |
6cc37ee5 JD |
471 | cur = i2c_smbus_read_byte_data(client, i); |
472 | if ((i2c_smbus_read_byte_data(client, i + 0x40) != cur) | |
473 | || (i2c_smbus_read_byte_data(client, i + 0x80) != cur) | |
474 | || (i2c_smbus_read_byte_data(client, i + 0xc0) != cur)) | |
66b3b1f7 | 475 | return -ENODEV; |
1da177e4 LT |
476 | } |
477 | ||
8c8bacc8 | 478 | strlcpy(info->type, "lm80", I2C_NAME_SIZE); |
1da177e4 | 479 | |
8c8bacc8 JD |
480 | return 0; |
481 | } | |
1da177e4 | 482 | |
8c8bacc8 JD |
483 | static int lm80_probe(struct i2c_client *client, |
484 | const struct i2c_device_id *id) | |
485 | { | |
486 | struct lm80_data *data; | |
487 | int err; | |
488 | ||
489 | data = kzalloc(sizeof(struct lm80_data), GFP_KERNEL); | |
490 | if (!data) { | |
491 | err = -ENOMEM; | |
492 | goto exit; | |
493 | } | |
494 | ||
495 | i2c_set_clientdata(client, data); | |
496 | mutex_init(&data->update_lock); | |
1da177e4 LT |
497 | |
498 | /* Initialize the LM80 chip */ | |
6cc37ee5 | 499 | lm80_init_client(client); |
1da177e4 LT |
500 | |
501 | /* A few vars need to be filled upon startup */ | |
6cc37ee5 JD |
502 | data->fan_min[0] = lm80_read_value(client, LM80_REG_FAN_MIN(1)); |
503 | data->fan_min[1] = lm80_read_value(client, LM80_REG_FAN_MIN(2)); | |
1da177e4 LT |
504 | |
505 | /* Register sysfs hooks */ | |
66b3b1f7 FM |
506 | err = sysfs_create_group(&client->dev.kobj, &lm80_group); |
507 | if (err) | |
8c8bacc8 | 508 | goto error_free; |
0501a381 | 509 | |
6cc37ee5 | 510 | data->hwmon_dev = hwmon_device_register(&client->dev); |
1beeffe4 TJ |
511 | if (IS_ERR(data->hwmon_dev)) { |
512 | err = PTR_ERR(data->hwmon_dev); | |
0501a381 | 513 | goto error_remove; |
943b0830 MH |
514 | } |
515 | ||
1da177e4 LT |
516 | return 0; |
517 | ||
0501a381 | 518 | error_remove: |
6cc37ee5 | 519 | sysfs_remove_group(&client->dev.kobj, &lm80_group); |
1da177e4 LT |
520 | error_free: |
521 | kfree(data); | |
522 | exit: | |
523 | return err; | |
524 | } | |
525 | ||
8c8bacc8 | 526 | static int lm80_remove(struct i2c_client *client) |
1da177e4 | 527 | { |
943b0830 | 528 | struct lm80_data *data = i2c_get_clientdata(client); |
1da177e4 | 529 | |
1beeffe4 | 530 | hwmon_device_unregister(data->hwmon_dev); |
0501a381 | 531 | sysfs_remove_group(&client->dev.kobj, &lm80_group); |
1da177e4 | 532 | |
943b0830 | 533 | kfree(data); |
1da177e4 LT |
534 | return 0; |
535 | } | |
536 | ||
537 | static int lm80_read_value(struct i2c_client *client, u8 reg) | |
538 | { | |
539 | return i2c_smbus_read_byte_data(client, reg); | |
540 | } | |
541 | ||
542 | static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value) | |
543 | { | |
544 | return i2c_smbus_write_byte_data(client, reg, value); | |
545 | } | |
546 | ||
547 | /* Called when we have found a new LM80. */ | |
548 | static void lm80_init_client(struct i2c_client *client) | |
549 | { | |
550 | /* Reset all except Watchdog values and last conversion values | |
551 | This sets fan-divs to 2, among others. This makes most other | |
552 | initializations unnecessary */ | |
553 | lm80_write_value(client, LM80_REG_CONFIG, 0x80); | |
554 | /* Set 11-bit temperature resolution */ | |
555 | lm80_write_value(client, LM80_REG_RES, 0x08); | |
556 | ||
557 | /* Start monitoring */ | |
558 | lm80_write_value(client, LM80_REG_CONFIG, 0x01); | |
559 | } | |
560 | ||
561 | static struct lm80_data *lm80_update_device(struct device *dev) | |
562 | { | |
563 | struct i2c_client *client = to_i2c_client(dev); | |
564 | struct lm80_data *data = i2c_get_clientdata(client); | |
565 | int i; | |
566 | ||
9a61bf63 | 567 | mutex_lock(&data->update_lock); |
1da177e4 LT |
568 | |
569 | if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { | |
570 | dev_dbg(&client->dev, "Starting lm80 update\n"); | |
571 | for (i = 0; i <= 6; i++) { | |
572 | data->in[i] = | |
573 | lm80_read_value(client, LM80_REG_IN(i)); | |
574 | data->in_min[i] = | |
575 | lm80_read_value(client, LM80_REG_IN_MIN(i)); | |
576 | data->in_max[i] = | |
577 | lm80_read_value(client, LM80_REG_IN_MAX(i)); | |
578 | } | |
579 | data->fan[0] = lm80_read_value(client, LM80_REG_FAN1); | |
580 | data->fan_min[0] = | |
581 | lm80_read_value(client, LM80_REG_FAN_MIN(1)); | |
582 | data->fan[1] = lm80_read_value(client, LM80_REG_FAN2); | |
583 | data->fan_min[1] = | |
584 | lm80_read_value(client, LM80_REG_FAN_MIN(2)); | |
585 | ||
586 | data->temp = | |
587 | (lm80_read_value(client, LM80_REG_TEMP) << 8) | | |
588 | (lm80_read_value(client, LM80_REG_RES) & 0xf0); | |
589 | data->temp_os_max = | |
590 | lm80_read_value(client, LM80_REG_TEMP_OS_MAX); | |
591 | data->temp_os_hyst = | |
592 | lm80_read_value(client, LM80_REG_TEMP_OS_HYST); | |
593 | data->temp_hot_max = | |
594 | lm80_read_value(client, LM80_REG_TEMP_HOT_MAX); | |
595 | data->temp_hot_hyst = | |
596 | lm80_read_value(client, LM80_REG_TEMP_HOT_HYST); | |
597 | ||
598 | i = lm80_read_value(client, LM80_REG_FANDIV); | |
599 | data->fan_div[0] = (i >> 2) & 0x03; | |
600 | data->fan_div[1] = (i >> 4) & 0x03; | |
601 | data->alarms = lm80_read_value(client, LM80_REG_ALARM1) + | |
602 | (lm80_read_value(client, LM80_REG_ALARM2) << 8); | |
603 | data->last_updated = jiffies; | |
604 | data->valid = 1; | |
605 | } | |
606 | ||
9a61bf63 | 607 | mutex_unlock(&data->update_lock); |
1da177e4 LT |
608 | |
609 | return data; | |
610 | } | |
611 | ||
612 | static int __init sensors_lm80_init(void) | |
613 | { | |
614 | return i2c_add_driver(&lm80_driver); | |
615 | } | |
616 | ||
617 | static void __exit sensors_lm80_exit(void) | |
618 | { | |
619 | i2c_del_driver(&lm80_driver); | |
620 | } | |
621 | ||
622 | MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and " | |
623 | "Philip Edelbrock <phil@netroedge.com>"); | |
624 | MODULE_DESCRIPTION("LM80 driver"); | |
625 | MODULE_LICENSE("GPL"); | |
626 | ||
627 | module_init(sensors_lm80_init); | |
628 | module_exit(sensors_lm80_exit); |