Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Sensor device configuration | |
3 | # | |
4 | ||
5 | menu "I2C Hardware Bus support" | |
6 | depends on I2C | |
7 | ||
8 | config I2C_ALI1535 | |
9 | tristate "ALI 1535" | |
10 | depends on I2C && PCI && EXPERIMENTAL | |
11 | help | |
12 | If you say yes to this option, support will be included for the SMB | |
13 | Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB | |
14 | controller is part of the 7101 device, which is an ACPI-compliant | |
15 | Power Management Unit (PMU). | |
16 | ||
17 | This driver can also be built as a module. If so, the module | |
18 | will be called i2c-ali1535. | |
19 | ||
20 | config I2C_ALI1563 | |
21 | tristate "ALI 1563" | |
22 | depends on I2C && PCI && EXPERIMENTAL | |
23 | help | |
24 | If you say yes to this option, support will be included for the SMB | |
25 | Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB | |
26 | controller is part of the 7101 device, which is an ACPI-compliant | |
27 | Power Management Unit (PMU). | |
28 | ||
29 | This driver can also be built as a module. If so, the module | |
30 | will be called i2c-ali1563. | |
31 | ||
32 | config I2C_ALI15X3 | |
33 | tristate "ALI 15x3" | |
34 | depends on I2C && PCI && EXPERIMENTAL | |
35 | help | |
36 | If you say yes to this option, support will be included for the | |
37 | Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces. | |
38 | ||
39 | This driver can also be built as a module. If so, the module | |
40 | will be called i2c-ali15x3. | |
41 | ||
42 | config I2C_AMD756 | |
43 | tristate "AMD 756/766/768/8111 and nVidia nForce" | |
44 | depends on I2C && PCI && EXPERIMENTAL | |
45 | help | |
46 | If you say yes to this option, support will be included for the AMD | |
47 | 756/766/768 mainboard I2C interfaces. The driver also includes | |
48 | support for the first (SMBus 1.0) I2C interface of the AMD 8111 and | |
49 | the nVidia nForce I2C interface. | |
50 | ||
51 | This driver can also be built as a module. If so, the module | |
52 | will be called i2c-amd756. | |
53 | ||
54 | config I2C_AMD756_S4882 | |
55 | tristate "SMBus multiplexing on the Tyan S4882" | |
56 | depends on I2C_AMD756 && EXPERIMENTAL | |
57 | help | |
58 | Enabling this option will add specific SMBus support for the Tyan | |
59 | S4882 motherboard. On this 4-CPU board, the SMBus is multiplexed | |
60 | over 8 different channels, where the various memory module EEPROMs | |
61 | and temperature sensors live. Saying yes here will give you access | |
62 | to these in addition to the trunk. | |
63 | ||
64 | This driver can also be built as a module. If so, the module | |
65 | will be called i2c-amd756-s4882. | |
66 | ||
67 | config I2C_AMD8111 | |
68 | tristate "AMD 8111" | |
69 | depends on I2C && PCI && EXPERIMENTAL | |
70 | help | |
71 | If you say yes to this option, support will be included for the | |
72 | second (SMBus 2.0) AMD 8111 mainboard I2C interface. | |
73 | ||
74 | This driver can also be built as a module. If so, the module | |
75 | will be called i2c-amd8111. | |
76 | ||
77 | config I2C_AU1550 | |
78 | tristate "Au1550 SMBus interface" | |
79 | depends on I2C && SOC_AU1550 | |
80 | help | |
81 | If you say yes to this option, support will be included for the | |
82 | Au1550 SMBus interface. | |
83 | ||
84 | This driver can also be built as a module. If so, the module | |
85 | will be called i2c-au1550. | |
86 | ||
87 | config I2C_ELEKTOR | |
88 | tristate "Elektor ISA card" | |
89 | depends on I2C && ISA && BROKEN_ON_SMP | |
90 | select I2C_ALGOPCF | |
91 | help | |
92 | This supports the PCF8584 ISA bus I2C adapter. Say Y if you own | |
93 | such an adapter. | |
94 | ||
95 | This support is also available as a module. If so, the module | |
96 | will be called i2c-elektor. | |
97 | ||
98 | config I2C_HYDRA | |
99 | tristate "CHRP Apple Hydra Mac I/O I2C interface" | |
100 | depends on I2C && PCI && PPC_CHRP && EXPERIMENTAL | |
101 | select I2C_ALGOBIT | |
102 | help | |
103 | This supports the use of the I2C interface in the Apple Hydra Mac | |
104 | I/O chip on some CHRP machines (e.g. the LongTrail). Say Y if you | |
105 | have such a machine. | |
106 | ||
107 | This support is also available as a module. If so, the module | |
108 | will be called i2c-hydra. | |
109 | ||
110 | config I2C_I801 | |
111 | tristate "Intel 82801 (ICH)" | |
112 | depends on I2C && PCI && EXPERIMENTAL | |
113 | help | |
114 | If you say yes to this option, support will be included for the Intel | |
115 | 801 family of mainboard I2C interfaces. Specifically, the following | |
116 | versions of the chipset are supported: | |
117 | 82801AA | |
118 | 82801AB | |
119 | 82801BA | |
120 | 82801CA/CAM | |
121 | 82801DB | |
122 | 82801EB/ER (ICH5/ICH5R) | |
123 | 6300ESB | |
124 | ICH6 | |
125 | ICH7 | |
126 | ||
127 | This driver can also be built as a module. If so, the module | |
128 | will be called i2c-i801. | |
129 | ||
130 | config I2C_I810 | |
131 | tristate "Intel 810/815" | |
132 | depends on I2C && PCI && EXPERIMENTAL | |
133 | select I2C_ALGOBIT | |
134 | help | |
135 | If you say yes to this option, support will be included for the Intel | |
136 | 810/815 family of mainboard I2C interfaces. Specifically, the | |
137 | following versions of the chipset is supported: | |
138 | i810AA | |
139 | i810AB | |
140 | i810E | |
141 | i815 | |
142 | ||
143 | This driver can also be built as a module. If so, the module | |
144 | will be called i2c-i810. | |
145 | ||
146 | config I2C_PIIX4 | |
147 | tristate "Intel PIIX4" | |
148 | depends on I2C && PCI | |
149 | help | |
150 | If you say yes to this option, support will be included for the Intel | |
151 | PIIX4 family of mainboard I2C interfaces. Specifically, the following | |
152 | versions of the chipset are supported: | |
153 | Intel PIIX4 | |
154 | Intel 440MX | |
155 | Serverworks OSB4 | |
156 | Serverworks CSB5 | |
157 | Serverworks CSB6 | |
158 | SMSC Victory66 | |
159 | ||
160 | This driver can also be built as a module. If so, the module | |
161 | will be called i2c-piix4. | |
162 | ||
163 | config I2C_IBM_IIC | |
164 | tristate "IBM PPC 4xx on-chip I2C interface" | |
165 | depends on IBM_OCP && I2C | |
166 | help | |
167 | Say Y here if you want to use IIC peripheral found on | |
168 | embedded IBM PPC 4xx based systems. | |
169 | ||
170 | This driver can also be built as a module. If so, the module | |
171 | will be called i2c-ibm_iic. | |
172 | ||
173 | config I2C_IOP3XX | |
174 | tristate "Intel IOP3xx and IXP4xx on-chip I2C interface" | |
175 | depends on (ARCH_IOP3XX || ARCH_IXP4XX) && I2C | |
176 | help | |
177 | Say Y here if you want to use the IIC bus controller on | |
178 | the Intel IOP3xx I/O Processors or IXP4xx Network Processors. | |
179 | ||
180 | This driver can also be built as a module. If so, the module | |
181 | will be called i2c-iop3xx. | |
182 | ||
183 | config I2C_ISA | |
184 | tristate "ISA Bus support" | |
185 | depends on I2C && EXPERIMENTAL | |
186 | help | |
187 | If you say yes to this option, support will be included for i2c | |
188 | interfaces that are on the ISA bus. | |
189 | ||
190 | This driver can also be built as a module. If so, the module | |
191 | will be called i2c-isa. | |
192 | ||
193 | config I2C_ITE | |
194 | tristate "ITE I2C Adapter" | |
195 | depends on I2C && MIPS_ITE8172 | |
196 | select I2C_ALGOITE | |
197 | help | |
198 | This supports the ITE8172 I2C peripheral found on some MIPS | |
199 | systems. Say Y if you have one of these. You should also say Y for | |
200 | the ITE I2C driver algorithm support above. | |
201 | ||
202 | This support is also available as a module. If so, the module | |
203 | will be called i2c-ite. | |
204 | ||
205 | config I2C_IXP4XX | |
206 | tristate "IXP4xx GPIO-Based I2C Interface" | |
207 | depends on I2C && ARCH_IXP4XX | |
208 | select I2C_ALGOBIT | |
209 | help | |
210 | Say Y here if you have an Intel IXP4xx(420,421,422,425) based | |
211 | system and are using GPIO lines for an I2C bus. | |
212 | ||
213 | This support is also available as a module. If so, the module | |
214 | will be called i2c-ixp4xx. | |
215 | ||
216 | config I2C_IXP2000 | |
217 | tristate "IXP2000 GPIO-Based I2C Interface" | |
218 | depends on I2C && ARCH_IXP2000 | |
219 | select I2C_ALGOBIT | |
220 | help | |
221 | Say Y here if you have an Intel IXP2000(2400, 2800, 2850) based | |
222 | system and are using GPIO lines for an I2C bus. | |
223 | ||
224 | This support is also available as a module. If so, the module | |
225 | will be called i2c-ixp2000. | |
226 | ||
227 | config I2C_KEYWEST | |
228 | tristate "Powermac Keywest I2C interface" | |
229 | depends on I2C && PPC_PMAC | |
230 | help | |
231 | This supports the use of the I2C interface in the combo-I/O | |
232 | chip on recent Apple machines. Say Y if you have such a machine. | |
233 | ||
234 | This support is also available as a module. If so, the module | |
235 | will be called i2c-keywest. | |
236 | ||
237 | config I2C_MPC | |
238 | tristate "MPC107/824x/85xx/52xx" | |
239 | depends on I2C && PPC | |
240 | help | |
241 | If you say yes to this option, support will be included for the | |
242 | built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and | |
243 | MPC85xx family processors. The driver may also work on 52xx | |
244 | family processors, though interrupts are known not to work. | |
245 | ||
246 | This driver can also be built as a module. If so, the module | |
247 | will be called i2c-mpc. | |
248 | ||
249 | config I2C_NFORCE2 | |
250 | tristate "Nvidia Nforce2" | |
251 | depends on I2C && PCI && EXPERIMENTAL | |
252 | help | |
253 | If you say yes to this option, support will be included for the Nvidia | |
254 | Nforce2 family of mainboard I2C interfaces. | |
255 | This driver also supports the nForce3 Pro 150 MCP. | |
256 | ||
257 | This driver can also be built as a module. If so, the module | |
258 | will be called i2c-nforce2. | |
259 | ||
260 | config I2C_PARPORT | |
261 | tristate "Parallel port adapter" | |
262 | depends on I2C && PARPORT | |
263 | select I2C_ALGOBIT | |
264 | help | |
265 | This supports parallel port I2C adapters such as the ones made by | |
266 | Philips or Velleman, Analog Devices evaluation boards, and more. | |
267 | Basically any adapter using the parallel port as an I2C bus with | |
268 | no extra chipset is supported by this driver, or could be. | |
269 | ||
270 | This driver is a replacement for (and was inspired by) an older | |
271 | driver named i2c-philips-par. The new driver supports more devices, | |
272 | and makes it easier to add support for new devices. | |
273 | ||
274 | Another driver exists, named i2c-parport-light, which doesn't depend | |
275 | on the parport driver. This is meant for embedded systems. Don't say | |
276 | Y here if you intend to say Y or M there. | |
277 | ||
278 | This support is also available as a module. If so, the module | |
279 | will be called i2c-parport. | |
280 | ||
281 | config I2C_PARPORT_LIGHT | |
282 | tristate "Parallel port adapter (light)" | |
283 | depends on I2C | |
284 | select I2C_ALGOBIT | |
285 | help | |
286 | This supports parallel port I2C adapters such as the ones made by | |
287 | Philips or Velleman, Analog Devices evaluation boards, and more. | |
288 | Basically any adapter using the parallel port as an I2C bus with | |
289 | no extra chipset is supported by this driver, or could be. | |
290 | ||
291 | This driver is a light version of i2c-parport. It doesn't depend | |
292 | on the parport driver, and uses direct I/O access instead. This | |
293 | might be prefered on embedded systems where wasting memory for | |
294 | the clean but heavy parport handling is not an option. The | |
295 | drawback is a reduced portability and the impossibility to | |
296 | dasiy-chain other parallel port devices. | |
297 | ||
298 | Don't say Y here if you said Y or M to i2c-parport. Saying M to | |
299 | both is possible but both modules should not be loaded at the same | |
300 | time. | |
301 | ||
302 | This support is also available as a module. If so, the module | |
303 | will be called i2c-parport-light. | |
304 | ||
305 | config I2C_PROSAVAGE | |
306 | tristate "S3/VIA (Pro)Savage" | |
307 | depends on I2C && PCI && EXPERIMENTAL | |
308 | select I2C_ALGOBIT | |
309 | help | |
310 | If you say yes to this option, support will be included for the | |
311 | I2C bus and DDC bus of the S3VIA embedded Savage4 and ProSavage8 | |
312 | graphics processors. | |
313 | chipsets supported: | |
314 | S3/VIA KM266/VT8375 aka ProSavage8 | |
315 | S3/VIA KM133/VT8365 aka Savage4 | |
316 | ||
317 | This support is also available as a module. If so, the module | |
318 | will be called i2c-prosavage. | |
319 | ||
320 | config I2C_RPXLITE | |
321 | tristate "Embedded Planet RPX Lite/Classic support" | |
322 | depends on (RPXLITE || RPXCLASSIC) && I2C | |
323 | select I2C_ALGO8XX | |
324 | ||
325 | config I2C_S3C2410 | |
326 | tristate "S3C2410 I2C Driver" | |
327 | depends on I2C && ARCH_S3C2410 | |
328 | help | |
329 | Say Y here to include support for I2C controller in the | |
330 | Samsung S3C2410 based System-on-Chip devices. | |
331 | ||
332 | config I2C_SAVAGE4 | |
333 | tristate "S3 Savage 4" | |
334 | depends on I2C && PCI && EXPERIMENTAL | |
335 | select I2C_ALGOBIT | |
336 | help | |
337 | If you say yes to this option, support will be included for the | |
338 | S3 Savage 4 I2C interface. | |
339 | ||
340 | This driver can also be built as a module. If so, the module | |
341 | will be called i2c-savage4. | |
342 | ||
343 | config I2C_SIBYTE | |
344 | tristate "SiByte SMBus interface" | |
345 | depends on SIBYTE_SB1xxx_SOC && I2C | |
346 | help | |
347 | Supports the SiByte SOC on-chip I2C interfaces (2 channels). | |
348 | ||
349 | config SCx200_I2C | |
350 | tristate "NatSemi SCx200 I2C using GPIO pins" | |
351 | depends on SCx200_GPIO && I2C | |
352 | select I2C_ALGOBIT | |
353 | help | |
354 | Enable the use of two GPIO pins of a SCx200 processor as an I2C bus. | |
355 | ||
356 | If you don't know what to do here, say N. | |
357 | ||
358 | This support is also available as a module. If so, the module | |
359 | will be called scx200_i2c. | |
360 | ||
361 | config SCx200_I2C_SCL | |
362 | int "GPIO pin used for SCL" | |
363 | depends on SCx200_I2C | |
364 | default "12" | |
365 | help | |
366 | Enter the GPIO pin number used for the SCL signal. This value can | |
367 | also be specified with a module parameter. | |
368 | ||
369 | config SCx200_I2C_SDA | |
370 | int "GPIO pin used for SDA" | |
371 | depends on SCx200_I2C | |
372 | default "13" | |
373 | help | |
374 | Enter the GPIO pin number used for the SSA signal. This value can | |
375 | also be specified with a module parameter. | |
376 | ||
377 | config SCx200_ACB | |
378 | tristate "NatSemi SCx200 ACCESS.bus" | |
379 | depends on I2C && PCI | |
380 | help | |
381 | Enable the use of the ACCESS.bus controllers of a SCx200 processor. | |
382 | ||
383 | If you don't know what to do here, say N. | |
384 | ||
385 | This support is also available as a module. If so, the module | |
386 | will be called scx200_acb. | |
387 | ||
388 | config I2C_SIS5595 | |
389 | tristate "SiS 5595" | |
390 | depends on I2C && PCI && EXPERIMENTAL | |
391 | help | |
392 | If you say yes to this option, support will be included for the | |
393 | SiS5595 SMBus (a subset of I2C) interface. | |
394 | ||
395 | This driver can also be built as a module. If so, the module | |
396 | will be called i2c-sis5595. | |
397 | ||
398 | config I2C_SIS630 | |
399 | tristate "SiS 630/730" | |
400 | depends on I2C && PCI && EXPERIMENTAL | |
401 | help | |
402 | If you say yes to this option, support will be included for the | |
403 | SiS630 and SiS730 SMBus (a subset of I2C) interface. | |
404 | ||
405 | This driver can also be built as a module. If so, the module | |
406 | will be called i2c-sis630. | |
407 | ||
408 | config I2C_SIS96X | |
409 | tristate "SiS 96x" | |
410 | depends on I2C && PCI && EXPERIMENTAL | |
411 | help | |
412 | If you say yes to this option, support will be included for the SiS | |
413 | 96x SMBus (a subset of I2C) interfaces. Specifically, the following | |
414 | chipsets are supported: | |
415 | 645/961 | |
416 | 645DX/961 | |
417 | 645DX/962 | |
418 | 648/961 | |
419 | 650/961 | |
420 | 735 | |
421 | ||
422 | This driver can also be built as a module. If so, the module | |
423 | will be called i2c-sis96x. | |
424 | ||
425 | config I2C_STUB | |
426 | tristate "I2C/SMBus Test Stub" | |
427 | depends on I2C && EXPERIMENTAL && 'm' | |
428 | default 'n' | |
429 | help | |
430 | This module may be useful to developers of SMBus client drivers, | |
431 | especially for certain kinds of sensor chips. | |
432 | ||
433 | If you do build this module, be sure to read the notes and warnings | |
434 | in <file:Documentation/i2c/i2c-stub>. | |
435 | ||
436 | If you don't know what to do here, definitely say N. | |
437 | ||
438 | config I2C_VIA | |
439 | tristate "VIA 82C586B" | |
440 | depends on I2C && PCI && EXPERIMENTAL | |
441 | select I2C_ALGOBIT | |
442 | help | |
443 | If you say yes to this option, support will be included for the VIA | |
444 | 82C586B I2C interface | |
445 | ||
446 | This driver can also be built as a module. If so, the module | |
447 | will be called i2c-via. | |
448 | ||
449 | config I2C_VIAPRO | |
450 | tristate "VIA 82C596/82C686/823x" | |
451 | depends on I2C && PCI && EXPERIMENTAL | |
452 | help | |
453 | If you say yes to this option, support will be included for the VIA | |
454 | 82C596/82C686/823x I2C interfaces. Specifically, the following | |
455 | chipsets are supported: | |
456 | 82C596A/B | |
457 | 82C686A/B | |
458 | 8231 | |
459 | 8233 | |
460 | 8233A | |
461 | 8235 | |
462 | 8237 | |
463 | ||
464 | This driver can also be built as a module. If so, the module | |
465 | will be called i2c-viapro. | |
466 | ||
467 | config I2C_VOODOO3 | |
468 | tristate "Voodoo 3" | |
469 | depends on I2C && PCI && EXPERIMENTAL | |
470 | select I2C_ALGOBIT | |
471 | help | |
472 | If you say yes to this option, support will be included for the | |
473 | Voodoo 3 I2C interface. | |
474 | ||
475 | This driver can also be built as a module. If so, the module | |
476 | will be called i2c-voodoo3. | |
477 | ||
478 | config I2C_PCA_ISA | |
479 | tristate "PCA9564 on an ISA bus" | |
480 | depends on I2C | |
481 | select I2C_ALGOPCA | |
482 | help | |
483 | This driver supports ISA boards using the Philips PCA 9564 | |
484 | Parallel bus to I2C bus controller | |
485 | ||
486 | This driver can also be built as a module. If so, the module | |
487 | will be called i2c-pca-isa. | |
488 | ||
489 | config I2C_MV64XXX | |
490 | tristate "Marvell mv64xxx I2C Controller" | |
491 | depends on I2C && MV64X60 && EXPERIMENTAL | |
492 | help | |
493 | If you say yes to this option, support will be included for the | |
494 | built-in I2C interface on the Marvell 64xxx line of host bridges. | |
495 | ||
496 | This driver can also be built as a module. If so, the module | |
497 | will be called i2c-mv64xxx. | |
498 | ||
499 | endmenu |