Commit | Line | Data |
---|---|---|
85660f43 RB |
1 | /* |
2 | * (C) Copyright 2009-2010 | |
3 | * Nokia Siemens Networks, michael.lawnick.ext@nsn.com | |
4 | * | |
5 | * Portions Copyright (C) 2010 Cavium Networks, Inc. | |
6 | * | |
7 | * This is a driver for the i2c adapter in Cavium Networks' OCTEON processors. | |
8 | * | |
9 | * This file is licensed under the terms of the GNU General Public | |
10 | * License version 2. This program is licensed "as is" without any | |
11 | * warranty of any kind, whether express or implied. | |
12 | */ | |
13 | ||
14 | #include <linux/kernel.h> | |
15 | #include <linux/module.h> | |
16 | #include <linux/sched.h> | |
17 | #include <linux/init.h> | |
18 | ||
19 | #include <linux/io.h> | |
20 | #include <linux/i2c.h> | |
21 | #include <linux/interrupt.h> | |
22 | #include <linux/delay.h> | |
23 | #include <linux/platform_device.h> | |
24 | ||
25 | #include <asm/octeon/octeon.h> | |
26 | ||
27 | #define DRV_NAME "i2c-octeon" | |
28 | ||
29 | /* The previous out-of-tree version was implicitly version 1.0. */ | |
30 | #define DRV_VERSION "2.0" | |
31 | ||
32 | /* register offsets */ | |
33 | #define SW_TWSI 0x00 | |
34 | #define TWSI_INT 0x10 | |
35 | ||
36 | /* Controller command patterns */ | |
37 | #define SW_TWSI_V 0x8000000000000000ull | |
38 | #define SW_TWSI_EOP_TWSI_DATA 0x0C00000100000000ull | |
39 | #define SW_TWSI_EOP_TWSI_CTL 0x0C00000200000000ull | |
40 | #define SW_TWSI_EOP_TWSI_CLKCTL 0x0C00000300000000ull | |
41 | #define SW_TWSI_EOP_TWSI_STAT 0x0C00000300000000ull | |
42 | #define SW_TWSI_EOP_TWSI_RST 0x0C00000700000000ull | |
43 | #define SW_TWSI_OP_TWSI_CLK 0x0800000000000000ull | |
44 | #define SW_TWSI_R 0x0100000000000000ull | |
45 | ||
46 | /* Controller command and status bits */ | |
47 | #define TWSI_CTL_CE 0x80 | |
48 | #define TWSI_CTL_ENAB 0x40 | |
49 | #define TWSI_CTL_STA 0x20 | |
50 | #define TWSI_CTL_STP 0x10 | |
51 | #define TWSI_CTL_IFLG 0x08 | |
52 | #define TWSI_CTL_AAK 0x04 | |
53 | ||
54 | /* Some status values */ | |
55 | #define STAT_START 0x08 | |
56 | #define STAT_RSTART 0x10 | |
57 | #define STAT_TXADDR_ACK 0x18 | |
58 | #define STAT_TXDATA_ACK 0x28 | |
59 | #define STAT_RXADDR_ACK 0x40 | |
60 | #define STAT_RXDATA_ACK 0x50 | |
61 | #define STAT_IDLE 0xF8 | |
62 | ||
63 | struct octeon_i2c { | |
64 | wait_queue_head_t queue; | |
65 | struct i2c_adapter adap; | |
66 | int irq; | |
67 | int twsi_freq; | |
68 | int sys_freq; | |
69 | resource_size_t twsi_phys; | |
70 | void __iomem *twsi_base; | |
71 | resource_size_t regsize; | |
72 | struct device *dev; | |
73 | }; | |
74 | ||
75 | /** | |
76 | * octeon_i2c_write_sw - write an I2C core register. | |
77 | * @i2c: The struct octeon_i2c. | |
78 | * @eop_reg: Register selector. | |
79 | * @data: Value to be written. | |
80 | * | |
81 | * The I2C core registers are accessed indirectly via the SW_TWSI CSR. | |
82 | */ | |
83 | static void octeon_i2c_write_sw(struct octeon_i2c *i2c, | |
84 | u64 eop_reg, | |
85 | u8 data) | |
86 | { | |
87 | u64 tmp; | |
88 | ||
89 | __raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base + SW_TWSI); | |
90 | do { | |
91 | tmp = __raw_readq(i2c->twsi_base + SW_TWSI); | |
92 | } while ((tmp & SW_TWSI_V) != 0); | |
93 | } | |
94 | ||
95 | /** | |
96 | * octeon_i2c_read_sw - write an I2C core register. | |
97 | * @i2c: The struct octeon_i2c. | |
98 | * @eop_reg: Register selector. | |
99 | * | |
100 | * Returns the data. | |
101 | * | |
102 | * The I2C core registers are accessed indirectly via the SW_TWSI CSR. | |
103 | */ | |
104 | static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg) | |
105 | { | |
106 | u64 tmp; | |
107 | ||
108 | __raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base + SW_TWSI); | |
109 | do { | |
110 | tmp = __raw_readq(i2c->twsi_base + SW_TWSI); | |
111 | } while ((tmp & SW_TWSI_V) != 0); | |
112 | ||
113 | return tmp & 0xFF; | |
114 | } | |
115 | ||
116 | /** | |
117 | * octeon_i2c_write_int - write the TWSI_INT register | |
118 | * @i2c: The struct octeon_i2c. | |
119 | * @data: Value to be written. | |
120 | */ | |
121 | static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data) | |
122 | { | |
123 | u64 tmp; | |
124 | ||
125 | __raw_writeq(data, i2c->twsi_base + TWSI_INT); | |
126 | tmp = __raw_readq(i2c->twsi_base + TWSI_INT); | |
127 | } | |
128 | ||
129 | /** | |
130 | * octeon_i2c_int_enable - enable the TS interrupt. | |
131 | * @i2c: The struct octeon_i2c. | |
132 | * | |
133 | * The interrupt will be asserted when there is non-STAT_IDLE state in | |
134 | * the SW_TWSI_EOP_TWSI_STAT register. | |
135 | */ | |
136 | static void octeon_i2c_int_enable(struct octeon_i2c *i2c) | |
137 | { | |
138 | octeon_i2c_write_int(i2c, 0x40); | |
139 | } | |
140 | ||
141 | /** | |
142 | * octeon_i2c_int_disable - disable the TS interrupt. | |
143 | * @i2c: The struct octeon_i2c. | |
144 | */ | |
145 | static void octeon_i2c_int_disable(struct octeon_i2c *i2c) | |
146 | { | |
147 | octeon_i2c_write_int(i2c, 0); | |
148 | } | |
149 | ||
150 | /** | |
151 | * octeon_i2c_unblock - unblock the bus. | |
152 | * @i2c: The struct octeon_i2c. | |
153 | * | |
154 | * If there was a reset while a device was driving 0 to bus, | |
155 | * bus is blocked. We toggle it free manually by some clock | |
156 | * cycles and send a stop. | |
157 | */ | |
158 | static void octeon_i2c_unblock(struct octeon_i2c *i2c) | |
159 | { | |
160 | int i; | |
161 | ||
162 | dev_dbg(i2c->dev, "%s\n", __func__); | |
163 | for (i = 0; i < 9; i++) { | |
164 | octeon_i2c_write_int(i2c, 0x0); | |
165 | udelay(5); | |
166 | octeon_i2c_write_int(i2c, 0x200); | |
167 | udelay(5); | |
168 | } | |
169 | octeon_i2c_write_int(i2c, 0x300); | |
170 | udelay(5); | |
171 | octeon_i2c_write_int(i2c, 0x100); | |
172 | udelay(5); | |
173 | octeon_i2c_write_int(i2c, 0x0); | |
174 | } | |
175 | ||
176 | /** | |
177 | * octeon_i2c_isr - the interrupt service routine. | |
178 | * @int: The irq, unused. | |
179 | * @dev_id: Our struct octeon_i2c. | |
180 | */ | |
181 | static irqreturn_t octeon_i2c_isr(int irq, void *dev_id) | |
182 | { | |
183 | struct octeon_i2c *i2c = dev_id; | |
184 | ||
185 | octeon_i2c_int_disable(i2c); | |
186 | wake_up_interruptible(&i2c->queue); | |
187 | ||
188 | return IRQ_HANDLED; | |
189 | } | |
190 | ||
191 | ||
192 | static int octeon_i2c_test_iflg(struct octeon_i2c *i2c) | |
193 | { | |
194 | return (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_CTL) & TWSI_CTL_IFLG) != 0; | |
195 | } | |
196 | ||
197 | /** | |
198 | * octeon_i2c_wait - wait for the IFLG to be set. | |
199 | * @i2c: The struct octeon_i2c. | |
200 | * | |
201 | * Returns 0 on success, otherwise a negative errno. | |
202 | */ | |
203 | static int octeon_i2c_wait(struct octeon_i2c *i2c) | |
204 | { | |
205 | int result; | |
206 | ||
207 | octeon_i2c_int_enable(i2c); | |
208 | ||
209 | result = wait_event_interruptible_timeout(i2c->queue, | |
210 | octeon_i2c_test_iflg(i2c), | |
211 | i2c->adap.timeout); | |
212 | ||
213 | octeon_i2c_int_disable(i2c); | |
214 | ||
215 | if (result < 0) { | |
216 | dev_dbg(i2c->dev, "%s: wait interrupted\n", __func__); | |
217 | return result; | |
218 | } else if (result == 0) { | |
219 | dev_dbg(i2c->dev, "%s: timeout\n", __func__); | |
220 | result = -ETIMEDOUT; | |
221 | } | |
222 | ||
223 | return 0; | |
224 | } | |
225 | ||
226 | /** | |
227 | * octeon_i2c_start - send START to the bus. | |
228 | * @i2c: The struct octeon_i2c. | |
229 | * | |
230 | * Returns 0 on success, otherwise a negative errno. | |
231 | */ | |
232 | static int octeon_i2c_start(struct octeon_i2c *i2c) | |
233 | { | |
234 | u8 data; | |
235 | int result; | |
236 | ||
237 | octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, | |
238 | TWSI_CTL_ENAB | TWSI_CTL_STA); | |
239 | ||
240 | result = octeon_i2c_wait(i2c); | |
241 | if (result) { | |
242 | if (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT) == STAT_IDLE) { | |
243 | /* | |
244 | * Controller refused to send start flag May | |
245 | * be a client is holding SDA low - let's try | |
246 | * to free it. | |
247 | */ | |
248 | octeon_i2c_unblock(i2c); | |
249 | octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, | |
250 | TWSI_CTL_ENAB | TWSI_CTL_STA); | |
251 | ||
252 | result = octeon_i2c_wait(i2c); | |
253 | } | |
254 | if (result) | |
255 | return result; | |
256 | } | |
257 | ||
258 | data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); | |
259 | if ((data != STAT_START) && (data != STAT_RSTART)) { | |
260 | dev_err(i2c->dev, "%s: bad status (0x%x)\n", __func__, data); | |
261 | return -EIO; | |
262 | } | |
263 | ||
264 | return 0; | |
265 | } | |
266 | ||
267 | /** | |
268 | * octeon_i2c_stop - send STOP to the bus. | |
269 | * @i2c: The struct octeon_i2c. | |
270 | * | |
271 | * Returns 0 on success, otherwise a negative errno. | |
272 | */ | |
273 | static int octeon_i2c_stop(struct octeon_i2c *i2c) | |
274 | { | |
275 | u8 data; | |
276 | ||
277 | octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, | |
278 | TWSI_CTL_ENAB | TWSI_CTL_STP); | |
279 | ||
280 | data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); | |
281 | ||
282 | if (data != STAT_IDLE) { | |
283 | dev_err(i2c->dev, "%s: bad status(0x%x)\n", __func__, data); | |
284 | return -EIO; | |
285 | } | |
286 | return 0; | |
287 | } | |
288 | ||
289 | /** | |
290 | * octeon_i2c_write - send data to the bus. | |
291 | * @i2c: The struct octeon_i2c. | |
292 | * @target: Target address. | |
293 | * @data: Pointer to the data to be sent. | |
294 | * @length: Length of the data. | |
295 | * | |
296 | * The address is sent over the bus, then the data. | |
297 | * | |
298 | * Returns 0 on success, otherwise a negative errno. | |
299 | */ | |
300 | static int octeon_i2c_write(struct octeon_i2c *i2c, int target, | |
301 | const u8 *data, int length) | |
302 | { | |
303 | int i, result; | |
304 | u8 tmp; | |
305 | ||
306 | result = octeon_i2c_start(i2c); | |
307 | if (result) | |
308 | return result; | |
309 | ||
310 | octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, target << 1); | |
311 | octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB); | |
312 | ||
313 | result = octeon_i2c_wait(i2c); | |
314 | if (result) | |
315 | return result; | |
316 | ||
317 | for (i = 0; i < length; i++) { | |
318 | tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); | |
319 | if ((tmp != STAT_TXADDR_ACK) && (tmp != STAT_TXDATA_ACK)) { | |
320 | dev_err(i2c->dev, | |
321 | "%s: bad status before write (0x%x)\n", | |
322 | __func__, tmp); | |
323 | return -EIO; | |
324 | } | |
325 | ||
326 | octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, data[i]); | |
327 | octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB); | |
328 | ||
329 | result = octeon_i2c_wait(i2c); | |
330 | if (result) | |
331 | return result; | |
332 | } | |
333 | ||
334 | return 0; | |
335 | } | |
336 | ||
337 | /** | |
338 | * octeon_i2c_read - receive data from the bus. | |
339 | * @i2c: The struct octeon_i2c. | |
340 | * @target: Target address. | |
341 | * @data: Pointer to the location to store the datae . | |
342 | * @length: Length of the data. | |
343 | * | |
344 | * The address is sent over the bus, then the data is read. | |
345 | * | |
346 | * Returns 0 on success, otherwise a negative errno. | |
347 | */ | |
348 | static int octeon_i2c_read(struct octeon_i2c *i2c, int target, | |
349 | u8 *data, int length) | |
350 | { | |
351 | int i, result; | |
352 | u8 tmp; | |
353 | ||
354 | if (length < 1) | |
355 | return -EINVAL; | |
356 | ||
357 | result = octeon_i2c_start(i2c); | |
358 | if (result) | |
359 | return result; | |
360 | ||
361 | octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, (target<<1) | 1); | |
362 | octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB); | |
363 | ||
364 | result = octeon_i2c_wait(i2c); | |
365 | if (result) | |
366 | return result; | |
367 | ||
368 | for (i = 0; i < length; i++) { | |
369 | tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); | |
370 | if ((tmp != STAT_RXDATA_ACK) && (tmp != STAT_RXADDR_ACK)) { | |
371 | dev_err(i2c->dev, | |
372 | "%s: bad status before read (0x%x)\n", | |
373 | __func__, tmp); | |
374 | return -EIO; | |
375 | } | |
376 | ||
377 | if (i+1 < length) | |
378 | octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, | |
379 | TWSI_CTL_ENAB | TWSI_CTL_AAK); | |
380 | else | |
381 | octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, | |
382 | TWSI_CTL_ENAB); | |
383 | ||
384 | result = octeon_i2c_wait(i2c); | |
385 | if (result) | |
386 | return result; | |
387 | ||
388 | data[i] = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_DATA); | |
389 | } | |
390 | return 0; | |
391 | } | |
392 | ||
393 | /** | |
394 | * octeon_i2c_xfer - The driver's master_xfer function. | |
395 | * @adap: Pointer to the i2c_adapter structure. | |
396 | * @msgs: Pointer to the messages to be processed. | |
397 | * @num: Length of the MSGS array. | |
398 | * | |
399 | * Returns the number of messages processed, or a negative errno on | |
400 | * failure. | |
401 | */ | |
402 | static int octeon_i2c_xfer(struct i2c_adapter *adap, | |
403 | struct i2c_msg *msgs, | |
404 | int num) | |
405 | { | |
406 | struct i2c_msg *pmsg; | |
407 | int i; | |
408 | int ret = 0; | |
409 | struct octeon_i2c *i2c = i2c_get_adapdata(adap); | |
410 | ||
411 | for (i = 0; ret == 0 && i < num; i++) { | |
412 | pmsg = &msgs[i]; | |
413 | dev_dbg(i2c->dev, | |
414 | "Doing %s %d byte(s) to/from 0x%02x - %d of %d messages\n", | |
415 | pmsg->flags & I2C_M_RD ? "read" : "write", | |
416 | pmsg->len, pmsg->addr, i + 1, num); | |
417 | if (pmsg->flags & I2C_M_RD) | |
418 | ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf, | |
419 | pmsg->len); | |
420 | else | |
421 | ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf, | |
422 | pmsg->len); | |
423 | } | |
424 | octeon_i2c_stop(i2c); | |
425 | ||
426 | return (ret != 0) ? ret : num; | |
427 | } | |
428 | ||
429 | static u32 octeon_i2c_functionality(struct i2c_adapter *adap) | |
430 | { | |
431 | return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; | |
432 | } | |
433 | ||
434 | static const struct i2c_algorithm octeon_i2c_algo = { | |
435 | .master_xfer = octeon_i2c_xfer, | |
436 | .functionality = octeon_i2c_functionality, | |
437 | }; | |
438 | ||
439 | static struct i2c_adapter octeon_i2c_ops = { | |
440 | .owner = THIS_MODULE, | |
441 | .name = "OCTEON adapter", | |
442 | .algo = &octeon_i2c_algo, | |
443 | .timeout = 2, | |
444 | }; | |
445 | ||
446 | /** | |
447 | * octeon_i2c_setclock - Calculate and set clock divisors. | |
448 | */ | |
449 | static int __init octeon_i2c_setclock(struct octeon_i2c *i2c) | |
450 | { | |
451 | int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff; | |
452 | int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000; | |
453 | ||
454 | for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) { | |
455 | /* | |
456 | * An mdiv value of less than 2 seems to not work well | |
457 | * with ds1337 RTCs, so we constrain it to larger | |
458 | * values. | |
459 | */ | |
460 | for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) { | |
461 | /* | |
462 | * For given ndiv and mdiv values check the | |
463 | * two closest thp values. | |
464 | */ | |
465 | tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10; | |
466 | tclk *= (1 << ndiv_idx); | |
467 | thp_base = (i2c->sys_freq / (tclk * 2)) - 1; | |
468 | for (inc = 0; inc <= 1; inc++) { | |
469 | thp_idx = thp_base + inc; | |
470 | if (thp_idx < 5 || thp_idx > 0xff) | |
471 | continue; | |
472 | ||
473 | foscl = i2c->sys_freq / (2 * (thp_idx + 1)); | |
474 | foscl = foscl / (1 << ndiv_idx); | |
475 | foscl = foscl / (mdiv_idx + 1) / 10; | |
476 | diff = abs(foscl - i2c->twsi_freq); | |
477 | if (diff < delta_hz) { | |
478 | delta_hz = diff; | |
479 | thp = thp_idx; | |
480 | mdiv = mdiv_idx; | |
481 | ndiv = ndiv_idx; | |
482 | } | |
483 | } | |
484 | } | |
485 | } | |
486 | octeon_i2c_write_sw(i2c, SW_TWSI_OP_TWSI_CLK, thp); | |
487 | octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv); | |
488 | ||
489 | return 0; | |
490 | } | |
491 | ||
492 | static int __init octeon_i2c_initlowlevel(struct octeon_i2c *i2c) | |
493 | { | |
494 | u8 status; | |
495 | int tries; | |
496 | ||
497 | /* disable high level controller, enable bus access */ | |
498 | octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB); | |
499 | ||
500 | /* reset controller */ | |
501 | octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_RST, 0); | |
502 | ||
503 | for (tries = 10; tries; tries--) { | |
504 | udelay(1); | |
505 | status = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); | |
506 | if (status == STAT_IDLE) | |
507 | return 0; | |
508 | } | |
509 | dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n", __func__, status); | |
510 | return -EIO; | |
511 | } | |
512 | ||
513 | static int __devinit octeon_i2c_probe(struct platform_device *pdev) | |
514 | { | |
515 | int irq, result = 0; | |
516 | struct octeon_i2c *i2c; | |
517 | struct octeon_i2c_data *i2c_data; | |
518 | struct resource *res_mem; | |
519 | ||
520 | /* All adaptors have an irq. */ | |
521 | irq = platform_get_irq(pdev, 0); | |
522 | if (irq < 0) | |
523 | return irq; | |
524 | ||
525 | i2c = kzalloc(sizeof(*i2c), GFP_KERNEL); | |
526 | if (!i2c) { | |
527 | dev_err(&pdev->dev, "kzalloc failed\n"); | |
528 | result = -ENOMEM; | |
529 | goto out; | |
530 | } | |
531 | i2c->dev = &pdev->dev; | |
532 | i2c_data = pdev->dev.platform_data; | |
533 | ||
534 | res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
535 | ||
536 | if (res_mem == NULL) { | |
537 | dev_err(i2c->dev, "found no memory resource\n"); | |
538 | result = -ENXIO; | |
539 | goto fail_region; | |
540 | } | |
541 | ||
542 | if (i2c_data == NULL) { | |
543 | dev_err(i2c->dev, "no I2C frequency data\n"); | |
544 | result = -ENXIO; | |
545 | goto fail_region; | |
546 | } | |
547 | ||
548 | i2c->twsi_phys = res_mem->start; | |
549 | i2c->regsize = resource_size(res_mem); | |
550 | i2c->twsi_freq = i2c_data->i2c_freq; | |
551 | i2c->sys_freq = i2c_data->sys_freq; | |
552 | ||
553 | if (!request_mem_region(i2c->twsi_phys, i2c->regsize, res_mem->name)) { | |
554 | dev_err(i2c->dev, "request_mem_region failed\n"); | |
555 | goto fail_region; | |
556 | } | |
557 | i2c->twsi_base = ioremap(i2c->twsi_phys, i2c->regsize); | |
558 | ||
559 | init_waitqueue_head(&i2c->queue); | |
560 | ||
561 | i2c->irq = irq; | |
562 | ||
563 | result = request_irq(i2c->irq, octeon_i2c_isr, 0, DRV_NAME, i2c); | |
564 | if (result < 0) { | |
565 | dev_err(i2c->dev, "failed to attach interrupt\n"); | |
566 | goto fail_irq; | |
567 | } | |
568 | ||
569 | result = octeon_i2c_initlowlevel(i2c); | |
570 | if (result) { | |
571 | dev_err(i2c->dev, "init low level failed\n"); | |
572 | goto fail_add; | |
573 | } | |
574 | ||
575 | result = octeon_i2c_setclock(i2c); | |
576 | if (result) { | |
577 | dev_err(i2c->dev, "clock init failed\n"); | |
578 | goto fail_add; | |
579 | } | |
580 | ||
581 | i2c->adap = octeon_i2c_ops; | |
582 | i2c->adap.dev.parent = &pdev->dev; | |
583 | i2c->adap.nr = pdev->id >= 0 ? pdev->id : 0; | |
584 | i2c_set_adapdata(&i2c->adap, i2c); | |
585 | platform_set_drvdata(pdev, i2c); | |
586 | ||
587 | result = i2c_add_numbered_adapter(&i2c->adap); | |
588 | if (result < 0) { | |
589 | dev_err(i2c->dev, "failed to add adapter\n"); | |
590 | goto fail_add; | |
591 | } | |
592 | ||
593 | dev_info(i2c->dev, "version %s\n", DRV_VERSION); | |
594 | ||
595 | return result; | |
596 | ||
597 | fail_add: | |
598 | platform_set_drvdata(pdev, NULL); | |
599 | free_irq(i2c->irq, i2c); | |
600 | fail_irq: | |
601 | iounmap(i2c->twsi_base); | |
602 | release_mem_region(i2c->twsi_phys, i2c->regsize); | |
603 | fail_region: | |
604 | kfree(i2c); | |
605 | out: | |
606 | return result; | |
607 | }; | |
608 | ||
609 | static int __devexit octeon_i2c_remove(struct platform_device *pdev) | |
610 | { | |
611 | struct octeon_i2c *i2c = platform_get_drvdata(pdev); | |
612 | ||
613 | i2c_del_adapter(&i2c->adap); | |
614 | platform_set_drvdata(pdev, NULL); | |
615 | free_irq(i2c->irq, i2c); | |
616 | iounmap(i2c->twsi_base); | |
617 | release_mem_region(i2c->twsi_phys, i2c->regsize); | |
618 | kfree(i2c); | |
619 | return 0; | |
620 | }; | |
621 | ||
622 | static struct platform_driver octeon_i2c_driver = { | |
623 | .probe = octeon_i2c_probe, | |
624 | .remove = __devexit_p(octeon_i2c_remove), | |
625 | .driver = { | |
626 | .owner = THIS_MODULE, | |
627 | .name = DRV_NAME, | |
628 | }, | |
629 | }; | |
630 | ||
631 | static int __init octeon_i2c_init(void) | |
632 | { | |
633 | int rv; | |
634 | ||
635 | rv = platform_driver_register(&octeon_i2c_driver); | |
636 | return rv; | |
637 | } | |
638 | ||
639 | static void __exit octeon_i2c_exit(void) | |
640 | { | |
641 | platform_driver_unregister(&octeon_i2c_driver); | |
642 | } | |
643 | ||
644 | MODULE_AUTHOR("Michael Lawnick <michael.lawnick.ext@nsn.com>"); | |
645 | MODULE_DESCRIPTION("I2C-Bus adapter for Cavium OCTEON processors"); | |
646 | MODULE_LICENSE("GPL"); | |
647 | MODULE_VERSION(DRV_VERSION); | |
648 | MODULE_ALIAS("platform:" DRV_NAME); | |
649 | ||
650 | module_init(octeon_i2c_init); | |
651 | module_exit(octeon_i2c_exit); |