[PATCH] hwmon: kzalloc conversion
[deliverable/linux.git] / drivers / i2c / chips / ds1374.c
CommitLineData
c124a78d
RV
1/*
2 * drivers/i2c/chips/ds1374.c
3 *
4 * I2C client/driver for the Maxim/Dallas DS1374 Real-Time Clock
5 *
6 * Author: Randy Vinson <rvinson@mvista.com>
7 *
8 * Based on the m41t00.c by Mark Greer <mgreer@mvista.com>
9 *
10 * 2005 (c) MontaVista Software, Inc. This file is licensed under
11 * the terms of the GNU General Public License version 2. This program
12 * is licensed "as is" without any warranty of any kind, whether express
13 * or implied.
14 */
15/*
16 * This i2c client/driver wedges between the drivers/char/genrtc.c RTC
17 * interface and the SMBus interface of the i2c subsystem.
18 * It would be more efficient to use i2c msgs/i2c_transfer directly but, as
19 * recommened in .../Documentation/i2c/writing-clients section
20 * "Sending and receiving", using SMBus level communication is preferred.
21 */
22
23#include <linux/kernel.h>
24#include <linux/module.h>
25#include <linux/interrupt.h>
26#include <linux/i2c.h>
27#include <linux/rtc.h>
28#include <linux/bcd.h>
29
c124a78d
RV
30#define DS1374_REG_TOD0 0x00
31#define DS1374_REG_TOD1 0x01
32#define DS1374_REG_TOD2 0x02
33#define DS1374_REG_TOD3 0x03
34#define DS1374_REG_WDALM0 0x04
35#define DS1374_REG_WDALM1 0x05
36#define DS1374_REG_WDALM2 0x06
37#define DS1374_REG_CR 0x07
38#define DS1374_REG_SR 0x08
39#define DS1374_REG_SR_OSF 0x80
40#define DS1374_REG_TCR 0x09
41
42#define DS1374_DRV_NAME "ds1374"
43
44static DECLARE_MUTEX(ds1374_mutex);
45
46static struct i2c_driver ds1374_driver;
47static struct i2c_client *save_client;
48
49static unsigned short ignore[] = { I2C_CLIENT_END };
50static unsigned short normal_addr[] = { 0x68, I2C_CLIENT_END };
51
52static struct i2c_client_address_data addr_data = {
53 .normal_i2c = normal_addr,
c124a78d 54 .probe = ignore,
c124a78d 55 .ignore = ignore,
c124a78d
RV
56};
57
58static ulong ds1374_read_rtc(void)
59{
60 ulong time = 0;
61 int reg = DS1374_REG_WDALM0;
62
63 while (reg--) {
64 s32 tmp;
65 if ((tmp = i2c_smbus_read_byte_data(save_client, reg)) < 0) {
66 dev_warn(&save_client->dev,
67 "can't read from rtc chip\n");
68 return 0;
69 }
70 time = (time << 8) | (tmp & 0xff);
71 }
72 return time;
73}
74
75static void ds1374_write_rtc(ulong time)
76{
77 int reg;
78
79 for (reg = DS1374_REG_TOD0; reg < DS1374_REG_WDALM0; reg++) {
80 if (i2c_smbus_write_byte_data(save_client, reg, time & 0xff)
81 < 0) {
82 dev_warn(&save_client->dev,
83 "can't write to rtc chip\n");
84 break;
85 }
86 time = time >> 8;
87 }
88}
89
90static void ds1374_check_rtc_status(void)
91{
92 s32 tmp;
93
94 tmp = i2c_smbus_read_byte_data(save_client, DS1374_REG_SR);
95 if (tmp < 0) {
96 dev_warn(&save_client->dev,
97 "can't read status from rtc chip\n");
98 return;
99 }
100 if (tmp & DS1374_REG_SR_OSF) {
101 dev_warn(&save_client->dev,
102 "oscillator discontinuity flagged, time unreliable\n");
103 tmp &= ~DS1374_REG_SR_OSF;
104 tmp = i2c_smbus_write_byte_data(save_client, DS1374_REG_SR,
105 tmp & 0xff);
106 if (tmp < 0)
107 dev_warn(&save_client->dev,
108 "can't clear discontinuity notification\n");
109 }
110}
111
112ulong ds1374_get_rtc_time(void)
113{
114 ulong t1, t2;
115 int limit = 10; /* arbitrary retry limit */
116
117 down(&ds1374_mutex);
118
119 /*
120 * Since the reads are being performed one byte at a time using
121 * the SMBus vs a 4-byte i2c transfer, there is a chance that a
122 * carry will occur during the read. To detect this, 2 reads are
123 * performed and compared.
124 */
125 do {
126 t1 = ds1374_read_rtc();
127 t2 = ds1374_read_rtc();
128 } while (t1 != t2 && limit--);
129
130 up(&ds1374_mutex);
131
132 if (t1 != t2) {
133 dev_warn(&save_client->dev,
134 "can't get consistent time from rtc chip\n");
135 t1 = 0;
136 }
137
138 return t1;
139}
140
141static void ds1374_set_tlet(ulong arg)
142{
143 ulong t1, t2;
144 int limit = 10; /* arbitrary retry limit */
145
146 t1 = *(ulong *) arg;
147
148 down(&ds1374_mutex);
149
150 /*
151 * Since the writes are being performed one byte at a time using
152 * the SMBus vs a 4-byte i2c transfer, there is a chance that a
153 * carry will occur during the write. To detect this, the write
154 * value is read back and compared.
155 */
156 do {
157 ds1374_write_rtc(t1);
158 t2 = ds1374_read_rtc();
159 } while (t1 != t2 && limit--);
160
161 up(&ds1374_mutex);
162
163 if (t1 != t2)
164 dev_warn(&save_client->dev,
165 "can't confirm time set from rtc chip\n");
166}
167
8e14d6c1 168static ulong new_time;
c124a78d
RV
169
170DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet, (ulong) & new_time);
171
172int ds1374_set_rtc_time(ulong nowtime)
173{
174 new_time = nowtime;
175
176 if (in_interrupt())
177 tasklet_schedule(&ds1374_tasklet);
178 else
179 ds1374_set_tlet((ulong) & new_time);
180
181 return 0;
182}
183
184/*
185 *****************************************************************************
186 *
187 * Driver Interface
188 *
189 *****************************************************************************
190 */
191static int ds1374_probe(struct i2c_adapter *adap, int addr, int kind)
192{
193 struct i2c_client *client;
194 int rc;
195
196 client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
197 if (!client)
198 return -ENOMEM;
199
200 memset(client, 0, sizeof(struct i2c_client));
201 strncpy(client->name, DS1374_DRV_NAME, I2C_NAME_SIZE);
c124a78d
RV
202 client->addr = addr;
203 client->adapter = adap;
204 client->driver = &ds1374_driver;
205
206 if ((rc = i2c_attach_client(client)) != 0) {
207 kfree(client);
208 return rc;
209 }
210
211 save_client = client;
212
213 ds1374_check_rtc_status();
214
215 return 0;
216}
217
218static int ds1374_attach(struct i2c_adapter *adap)
219{
220 return i2c_probe(adap, &addr_data, ds1374_probe);
221}
222
223static int ds1374_detach(struct i2c_client *client)
224{
225 int rc;
226
227 if ((rc = i2c_detach_client(client)) == 0) {
228 kfree(i2c_get_clientdata(client));
229 tasklet_kill(&ds1374_tasklet);
230 }
231 return rc;
232}
233
234static struct i2c_driver ds1374_driver = {
235 .owner = THIS_MODULE,
236 .name = DS1374_DRV_NAME,
237 .id = I2C_DRIVERID_DS1374,
238 .flags = I2C_DF_NOTIFY,
239 .attach_adapter = ds1374_attach,
240 .detach_client = ds1374_detach,
241};
242
243static int __init ds1374_init(void)
244{
245 return i2c_add_driver(&ds1374_driver);
246}
247
248static void __exit ds1374_exit(void)
249{
250 i2c_del_driver(&ds1374_driver);
251}
252
253module_init(ds1374_init);
254module_exit(ds1374_exit);
255
256MODULE_AUTHOR("Randy Vinson <rvinson@mvista.com>");
257MODULE_DESCRIPTION("Maxim/Dallas DS1374 RTC I2C Client Driver");
258MODULE_LICENSE("GPL");
This page took 0.072601 seconds and 5 git commands to generate.