projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
ARM: OMAP: Change omap_cf.c and omap_nor.c to use omap_readw/writew instead of __REG
[deliverable/linux.git] / drivers / i2c / chips / isp1301_omap.c
CommitLineData
1da177e4
LT		 1/*
2 * isp1301_omap - ISP 1301 USB transceiver, talking to OMAP OTG controller
3 *
4 * Copyright (C) 2004 Texas Instruments
5 * Copyright (C) 2004 David Brownell
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 */
1da177e4 21
1da177e4
LT		 22#include <linux/kernel.h>
23#include <linux/module.h>
24#include <linux/init.h>
25#include <linux/slab.h>
26#include <linux/interrupt.h>
d052d1be 27#include <linux/platform_device.h>
5f848137 28#include <linux/usb/ch9.h>
187426e6 29#include <linux/usb/gadget.h>
1da177e4 30#include <linux/usb.h>
3a16f7b4 31#include <linux/usb/otg.h>
1da177e4
LT		 32#include <linux/i2c.h>
33#include <linux/workqueue.h>
34
35#include <asm/irq.h>
36#include <asm/arch/usb.h>
37
38
39#ifndef DEBUG
40#undef VERBOSE
41#endif
42
43
44#define DRIVER_VERSION "24 August 2004"
25da383d 45#define DRIVER_NAME (isp1301_driver.driver.name)
1da177e4
LT		 46
47MODULE_DESCRIPTION("ISP1301 USB OTG Transceiver Driver");
48MODULE_LICENSE("GPL");
49
50struct isp1301 {
51 struct otg_transceiver otg;
52 struct i2c_client client;
53 void (*i2c_release)(struct device *dev);
54
55 int irq;
25da383d 56 int irq_type;
1da177e4
LT		 57
58 u32 last_otg_ctrl;
59 unsigned working:1;
60
61 struct timer_list timer;
62
63 /* use keventd context to change the state for us */
64 struct work_struct work;
25da383d 65
1da177e4
LT		 66 unsigned long todo;
67# define WORK_UPDATE_ISP 0 /* update ISP from OTG */
68# define WORK_UPDATE_OTG 1 /* update OTG from ISP */
69# define WORK_HOST_RESUME 4 /* resume host */
70# define WORK_TIMER 6 /* timer fired */
71# define WORK_STOP 7 /* don't resubmit */
72};
73
74
75/* bits in OTG_CTRL_REG */
76
77#define OTG_XCEIV_OUTPUTS \
78 (OTG_ASESSVLD|OTG_BSESSEND|OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID)
79#define OTG_XCEIV_INPUTS \
80 (OTG_PULLDOWN|OTG_PULLUP|OTG_DRV_VBUS|OTG_PD_VBUS|OTG_PU_VBUS|OTG_PU_ID)
81#define OTG_CTRL_BITS \
82 (OTG_A_BUSREQ|OTG_A_SETB_HNPEN|OTG_B_BUSREQ|OTG_B_HNPEN|OTG_BUSDROP)
83 /* and OTG_PULLUP is sometimes written */
84
85#define OTG_CTRL_MASK (OTG_DRIVER_SEL| \
86 OTG_XCEIV_OUTPUTS|OTG_XCEIV_INPUTS| \
87 OTG_CTRL_BITS)
88
89
90/*-------------------------------------------------------------------------*/
91
92#ifdef CONFIG_MACH_OMAP_H2
93
94/* board-specific PM hooks */
95
25da383d 96#include <asm/gpio.h>
1da177e4
LT		 97#include <asm/arch/mux.h>
98#include <asm/mach-types.h>
99
100
101#if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE)
102
6d16bfb5 103#include <linux/i2c/tps65010.h>
1da177e4
LT		 104
105#else
106
107static inline int tps65010_set_vbus_draw(unsigned mA)
108{
109 pr_debug("tps65010: draw %d mA (STUB)\n", mA);
110 return 0;
111}
112
113#endif
114
115static void enable_vbus_draw(struct isp1301 *isp, unsigned mA)
116{
117 int status = tps65010_set_vbus_draw(mA);
118 if (status < 0)
119 pr_debug(" VBUS %d mA error %d\n", mA, status);
120}
121
122static void enable_vbus_source(struct isp1301 *isp)
123{
124 /* this board won't supply more than 8mA vbus power.
125 * some boards can switch a 100ma "unit load" (or more).
126 */
127}
128
129
130/* products will deliver OTG messages with LEDs, GUI, etc */
131static inline void notresponding(struct isp1301 *isp)
132{
133 printk(KERN_NOTICE "OTG device not responding.\n");
134}
135
136
137#endif
138
139/*-------------------------------------------------------------------------*/
140
141/* only two addresses possible */
142#define ISP_BASE 0x2c
143static unsigned short normal_i2c[] = {
144 ISP_BASE, ISP_BASE + 1,
145 I2C_CLIENT_END };
1da177e4
LT		 146
147I2C_CLIENT_INSMOD;
148
149static struct i2c_driver isp1301_driver;
150
151/* smbus apis are used for portability */
152
153static inline u8
154isp1301_get_u8(struct isp1301 *isp, u8 reg)
155{
156 return i2c_smbus_read_byte_data(&isp->client, reg + 0);
157}
158
159static inline int
160isp1301_get_u16(struct isp1301 *isp, u8 reg)
161{
162 return i2c_smbus_read_word_data(&isp->client, reg);
163}
164
165static inline int
166isp1301_set_bits(struct isp1301 *isp, u8 reg, u8 bits)
167{
168 return i2c_smbus_write_byte_data(&isp->client, reg + 0, bits);
169}
170
171static inline int
172isp1301_clear_bits(struct isp1301 *isp, u8 reg, u8 bits)
173{
174 return i2c_smbus_write_byte_data(&isp->client, reg + 1, bits);
175}
176
177/*-------------------------------------------------------------------------*/
178
179/* identification */
180#define ISP1301_VENDOR_ID 0x00 /* u16 read */
181#define ISP1301_PRODUCT_ID 0x02 /* u16 read */
182#define ISP1301_BCD_DEVICE 0x14 /* u16 read */
183
184#define I2C_VENDOR_ID_PHILIPS 0x04cc
185#define I2C_PRODUCT_ID_PHILIPS_1301 0x1301
186
187/* operational registers */
188#define ISP1301_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */
189# define MC1_SPEED_REG (1 << 0)
190# define MC1_SUSPEND_REG (1 << 1)
191# define MC1_DAT_SE0 (1 << 2)
192# define MC1_TRANSPARENT (1 << 3)
193# define MC1_BDIS_ACON_EN (1 << 4)
194# define MC1_OE_INT_EN (1 << 5)
195# define MC1_UART_EN (1 << 6)
196# define MC1_MASK 0x7f
197#define ISP1301_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */
198# define MC2_GLOBAL_PWR_DN (1 << 0)
199# define MC2_SPD_SUSP_CTRL (1 << 1)
200# define MC2_BI_DI (1 << 2)
201# define MC2_TRANSP_BDIR0 (1 << 3)
202# define MC2_TRANSP_BDIR1 (1 << 4)
203# define MC2_AUDIO_EN (1 << 5)
204# define MC2_PSW_EN (1 << 6)
205# define MC2_EN2V7 (1 << 7)
206#define ISP1301_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */
207# define OTG1_DP_PULLUP (1 << 0)
208# define OTG1_DM_PULLUP (1 << 1)
209# define OTG1_DP_PULLDOWN (1 << 2)
210# define OTG1_DM_PULLDOWN (1 << 3)
211# define OTG1_ID_PULLDOWN (1 << 4)
212# define OTG1_VBUS_DRV (1 << 5)
213# define OTG1_VBUS_DISCHRG (1 << 6)
214# define OTG1_VBUS_CHRG (1 << 7)
215#define ISP1301_OTG_STATUS 0x10 /* u8 readonly */
216# define OTG_B_SESS_END (1 << 6)
217# define OTG_B_SESS_VLD (1 << 7)
218
219#define ISP1301_INTERRUPT_SOURCE 0x08 /* u8 read */
220#define ISP1301_INTERRUPT_LATCH 0x0A /* u8 read, set, +1 clear */
221
222#define ISP1301_INTERRUPT_FALLING 0x0C /* u8 read, set, +1 clear */
223#define ISP1301_INTERRUPT_RISING 0x0E /* u8 read, set, +1 clear */
224
225/* same bitfields in all interrupt registers */
226# define INTR_VBUS_VLD (1 << 0)
227# define INTR_SESS_VLD (1 << 1)
228# define INTR_DP_HI (1 << 2)
229# define INTR_ID_GND (1 << 3)
230# define INTR_DM_HI (1 << 4)
231# define INTR_ID_FLOAT (1 << 5)
232# define INTR_BDIS_ACON (1 << 6)
233# define INTR_CR_INT (1 << 7)
234
235/*-------------------------------------------------------------------------*/
236
237static const char *state_string(enum usb_otg_state state)
238{
239 switch (state) {
240 case OTG_STATE_A_IDLE: return "a_idle";
241 case OTG_STATE_A_WAIT_VRISE: return "a_wait_vrise";
242 case OTG_STATE_A_WAIT_BCON: return "a_wait_bcon";
243 case OTG_STATE_A_HOST: return "a_host";
244 case OTG_STATE_A_SUSPEND: return "a_suspend";
245 case OTG_STATE_A_PERIPHERAL: return "a_peripheral";
246 case OTG_STATE_A_WAIT_VFALL: return "a_wait_vfall";
247 case OTG_STATE_A_VBUS_ERR: return "a_vbus_err";
248 case OTG_STATE_B_IDLE: return "b_idle";
249 case OTG_STATE_B_SRP_INIT: return "b_srp_init";
250 case OTG_STATE_B_PERIPHERAL: return "b_peripheral";
251 case OTG_STATE_B_WAIT_ACON: return "b_wait_acon";
252 case OTG_STATE_B_HOST: return "b_host";
253 default: return "UNDEFINED";
254 }
255}
256
257static inline const char *state_name(struct isp1301 *isp)
258{
259 return state_string(isp->otg.state);
260}
261
1da177e4
LT		 262/*-------------------------------------------------------------------------*/
263
264/* NOTE: some of this ISP1301 setup is specific to H2 boards;
265 * not everything is guarded by board-specific checks, or even using
266 * omap_usb_config data to deduce MC1_DAT_SE0 and MC2_BI_DI.
267 *
268 * ALSO: this currently doesn't use ISP1301 low-power modes
269 * while OTG is running.
270 */
271
272static void power_down(struct isp1301 *isp)
273{
274 isp->otg.state = OTG_STATE_UNDEFINED;
275
276 // isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
277 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND_REG);
278
279 isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_ID_PULLDOWN);
280 isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
281}
282
283static void power_up(struct isp1301 *isp)
284{
285 // isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
286 isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND_REG);
25da383d 287
1da177e4
LT		 288 /* do this only when cpu is driving transceiver,
289 * so host won't see a low speed device...
290 */
291 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
292}
293
294#define NO_HOST_SUSPEND
295
296static int host_suspend(struct isp1301 *isp)
297{
298#ifdef NO_HOST_SUSPEND
299 return 0;
300#else
301 struct device *dev;
302
303 if (!isp->otg.host)
304 return -ENODEV;
305
306 /* Currently ASSUMES only the OTG port matters;
307 * other ports could be active...
308 */
309 dev = isp->otg.host->controller;
310 return dev->driver->suspend(dev, 3, 0);
311#endif
312}
313
314static int host_resume(struct isp1301 *isp)
315{
316#ifdef NO_HOST_SUSPEND
317 return 0;
318#else
319 struct device *dev;
320
321 if (!isp->otg.host)
322 return -ENODEV;
323
324 dev = isp->otg.host->controller;
325 return dev->driver->resume(dev, 0);
326#endif
327}
328
329static int gadget_suspend(struct isp1301 *isp)
330{
331 isp->otg.gadget->b_hnp_enable = 0;
332 isp->otg.gadget->a_hnp_support = 0;
333 isp->otg.gadget->a_alt_hnp_support = 0;
334 return usb_gadget_vbus_disconnect(isp->otg.gadget);
335}
336
337/*-------------------------------------------------------------------------*/
338
339#define TIMER_MINUTES 10
340#define TIMER_JIFFIES (TIMER_MINUTES * 60 * HZ)
341
342/* Almost all our I2C messaging comes from a work queue's task context.
343 * NOTE: guaranteeing certain response times might mean we shouldn't
344 * share keventd's work queue; a realtime task might be safest.
345 */
346void
347isp1301_defer_work(struct isp1301 *isp, int work)
348{
349 int status;
350
351 if (isp && !test_and_set_bit(work, &isp->todo)) {
352 (void) get_device(&isp->client.dev);
353 status = schedule_work(&isp->work);
354 if (!status && !isp->working)
355 dev_vdbg(&isp->client.dev,
356 "work item %d may be lost\n", work);
357 }
358}
359
360/* called from irq handlers */
361static void a_idle(struct isp1301 *isp, const char *tag)
362{
363 if (isp->otg.state == OTG_STATE_A_IDLE)
364 return;
365
366 isp->otg.default_a = 1;
367 if (isp->otg.host) {
368 isp->otg.host->is_b_host = 0;
369 host_suspend(isp);
370 }
371 if (isp->otg.gadget) {
372 isp->otg.gadget->is_a_peripheral = 1;
373 gadget_suspend(isp);
374 }
375 isp->otg.state = OTG_STATE_A_IDLE;
376 isp->last_otg_ctrl = OTG_CTRL_REG = OTG_CTRL_REG & OTG_XCEIV_OUTPUTS;
377 pr_debug(" --> %s/%s\n", state_name(isp), tag);
378}
379
380/* called from irq handlers */
381static void b_idle(struct isp1301 *isp, const char *tag)
382{
383 if (isp->otg.state == OTG_STATE_B_IDLE)
384 return;
385
386 isp->otg.default_a = 0;
387 if (isp->otg.host) {
388 isp->otg.host->is_b_host = 1;
389 host_suspend(isp);
390 }
391 if (isp->otg.gadget) {
392 isp->otg.gadget->is_a_peripheral = 0;
393 gadget_suspend(isp);
394 }
395 isp->otg.state = OTG_STATE_B_IDLE;
396 isp->last_otg_ctrl = OTG_CTRL_REG = OTG_CTRL_REG & OTG_XCEIV_OUTPUTS;
397 pr_debug(" --> %s/%s\n", state_name(isp), tag);
398}
399
400static void
401dump_regs(struct isp1301 *isp, const char *label)
402{
403#ifdef DEBUG
404 u8 ctrl = isp1301_get_u8(isp, ISP1301_OTG_CONTROL_1);
405 u8 status = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
406 u8 src = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE);
407
408 pr_debug("otg: %06x, %s %s, otg/%02x stat/%02x.%02x\n",
409 OTG_CTRL_REG, label, state_name(isp),
410 ctrl, status, src);
411 /* mode control and irq enables don't change much */
412#endif
413}
414
415/*-------------------------------------------------------------------------*/
416
417#ifdef CONFIG_USB_OTG
418
419/*
420 * The OMAP OTG controller handles most of the OTG state transitions.
421 *
422 * We translate isp1301 outputs (mostly voltage comparator status) into
423 * OTG inputs; OTG outputs (mostly pullup/pulldown controls) and HNP state
424 * flags into isp1301 inputs ... and infer state transitions.
425 */
426
427#ifdef VERBOSE
428
429static void check_state(struct isp1301 *isp, const char *tag)
430{
431 enum usb_otg_state state = OTG_STATE_UNDEFINED;
432 u8 fsm = OTG_TEST_REG & 0x0ff;
433 unsigned extra = 0;
434
435 switch (fsm) {
436
437 /* default-b */
438 case 0x0:
439 state = OTG_STATE_B_IDLE;
440 break;
441 case 0x3:
442 case 0x7:
443 extra = 1;
444 case 0x1:
445 state = OTG_STATE_B_PERIPHERAL;
446 break;
447 case 0x11:
448 state = OTG_STATE_B_SRP_INIT;
449 break;
450
451 /* extra dual-role default-b states */
452 case 0x12:
453 case 0x13:
454 case 0x16:
455 extra = 1;
456 case 0x17:
457 state = OTG_STATE_B_WAIT_ACON;
458 break;
459 case 0x34:
460 state = OTG_STATE_B_HOST;
461 break;
462
463 /* default-a */
464 case 0x36:
465 state = OTG_STATE_A_IDLE;
466 break;
467 case 0x3c:
468 state = OTG_STATE_A_WAIT_VFALL;
469 break;
470 case 0x7d:
471 state = OTG_STATE_A_VBUS_ERR;
472 break;
473 case 0x9e:
474 case 0x9f:
475 extra = 1;
476 case 0x89:
477 state = OTG_STATE_A_PERIPHERAL;
478 break;
479 case 0xb7:
480 state = OTG_STATE_A_WAIT_VRISE;
481 break;
482 case 0xb8:
483 state = OTG_STATE_A_WAIT_BCON;
484 break;
485 case 0xb9:
486 state = OTG_STATE_A_HOST;
487 break;
488 case 0xba:
489 state = OTG_STATE_A_SUSPEND;
490 break;
491 default:
492 break;
493 }
494 if (isp->otg.state == state && !extra)
495 return;
496 pr_debug("otg: %s FSM %s/%02x, %s, %06x\n", tag,
497 state_string(state), fsm, state_name(isp), OTG_CTRL_REG);
498}
499
500#else
501
502static inline void check_state(struct isp1301 *isp, const char *tag) { }
503
504#endif
505
506/* outputs from ISP1301_INTERRUPT_SOURCE */
507static void update_otg1(struct isp1301 *isp, u8 int_src)
508{
509 u32 otg_ctrl;
510
511 otg_ctrl = OTG_CTRL_REG
512 & OTG_CTRL_MASK
513 & ~OTG_XCEIV_INPUTS
514 & ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD);
515 if (int_src & INTR_SESS_VLD)
516 otg_ctrl |= OTG_ASESSVLD;
517 else if (isp->otg.state == OTG_STATE_A_WAIT_VFALL) {
518 a_idle(isp, "vfall");
519 otg_ctrl &= ~OTG_CTRL_BITS;
520 }
521 if (int_src & INTR_VBUS_VLD)
522 otg_ctrl |= OTG_VBUSVLD;
523 if (int_src & INTR_ID_GND) { /* default-A */
524 if (isp->otg.state == OTG_STATE_B_IDLE
525 || isp->otg.state == OTG_STATE_UNDEFINED) {
526 a_idle(isp, "init");
527 return;
528 }
529 } else { /* default-B */
530 otg_ctrl |= OTG_ID;
531 if (isp->otg.state == OTG_STATE_A_IDLE
532 || isp->otg.state == OTG_STATE_UNDEFINED) {
533 b_idle(isp, "init");
534 return;
535 }
536 }
537 OTG_CTRL_REG = otg_ctrl;
538}
539
540/* outputs from ISP1301_OTG_STATUS */
541static void update_otg2(struct isp1301 *isp, u8 otg_status)
542{
543 u32 otg_ctrl;
544
545 otg_ctrl = OTG_CTRL_REG
546 & OTG_CTRL_MASK
547 & ~OTG_XCEIV_INPUTS
548 & ~(OTG_BSESSVLD|OTG_BSESSEND);
549 if (otg_status & OTG_B_SESS_VLD)
550 otg_ctrl |= OTG_BSESSVLD;
551 else if (otg_status & OTG_B_SESS_END)
552 otg_ctrl |= OTG_BSESSEND;
553 OTG_CTRL_REG = otg_ctrl;
554}
555
556/* inputs going to ISP1301 */
557static void otg_update_isp(struct isp1301 *isp)
558{
559 u32 otg_ctrl, otg_change;
560 u8 set = OTG1_DM_PULLDOWN, clr = OTG1_DM_PULLUP;
561
562 otg_ctrl = OTG_CTRL_REG;
563 otg_change = otg_ctrl ^ isp->last_otg_ctrl;
564 isp->last_otg_ctrl = otg_ctrl;
565 otg_ctrl = otg_ctrl & OTG_XCEIV_INPUTS;
566
567 switch (isp->otg.state) {
568 case OTG_STATE_B_IDLE:
569 case OTG_STATE_B_PERIPHERAL:
570 case OTG_STATE_B_SRP_INIT:
571 if (!(otg_ctrl & OTG_PULLUP)) {
572 // if (otg_ctrl & OTG_B_HNPEN) {
573 if (isp->otg.gadget->b_hnp_enable) {
574 isp->otg.state = OTG_STATE_B_WAIT_ACON;
575 pr_debug(" --> b_wait_acon\n");
576 }
577 goto pulldown;
578 }
579pullup:
580 set |= OTG1_DP_PULLUP;
581 clr |= OTG1_DP_PULLDOWN;
582 break;
583 case OTG_STATE_A_SUSPEND:
584 case OTG_STATE_A_PERIPHERAL:
585 if (otg_ctrl & OTG_PULLUP)
586 goto pullup;
587 /* FALLTHROUGH */
588 // case OTG_STATE_B_WAIT_ACON:
589 default:
590pulldown:
591 set |= OTG1_DP_PULLDOWN;
592 clr |= OTG1_DP_PULLUP;
593 break;
594 }
595
596# define toggle(OTG,ISP) do { \
597 if (otg_ctrl & OTG) set |= ISP; \
598 else clr |= ISP; \
599 } while (0)
600
601 if (!(isp->otg.host))
602 otg_ctrl &= ~OTG_DRV_VBUS;
603
604 switch (isp->otg.state) {
605 case OTG_STATE_A_SUSPEND:
606 if (otg_ctrl & OTG_DRV_VBUS) {
607 set |= OTG1_VBUS_DRV;
608 break;
609 }
610 /* HNP failed for some reason (A_AIDL_BDIS timeout) */
611 notresponding(isp);
612
613 /* FALLTHROUGH */
614 case OTG_STATE_A_VBUS_ERR:
615 isp->otg.state = OTG_STATE_A_WAIT_VFALL;
616 pr_debug(" --> a_wait_vfall\n");
617 /* FALLTHROUGH */
618 case OTG_STATE_A_WAIT_VFALL:
619 /* FIXME usbcore thinks port power is still on ... */
620 clr |= OTG1_VBUS_DRV;
621 break;
622 case OTG_STATE_A_IDLE:
623 if (otg_ctrl & OTG_DRV_VBUS) {
624 isp->otg.state = OTG_STATE_A_WAIT_VRISE;
625 pr_debug(" --> a_wait_vrise\n");
626 }
627 /* FALLTHROUGH */
628 default:
629 toggle(OTG_DRV_VBUS, OTG1_VBUS_DRV);
630 }
631
632 toggle(OTG_PU_VBUS, OTG1_VBUS_CHRG);
633 toggle(OTG_PD_VBUS, OTG1_VBUS_DISCHRG);
634
635# undef toggle
636
637 isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, set);
638 isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, clr);
639
640 /* HNP switch to host or peripheral; and SRP */
641 if (otg_change & OTG_PULLUP) {
642 switch (isp->otg.state) {
643 case OTG_STATE_B_IDLE:
644 if (clr & OTG1_DP_PULLUP)
645 break;
646 isp->otg.state = OTG_STATE_B_PERIPHERAL;
647 pr_debug(" --> b_peripheral\n");
648 break;
649 case OTG_STATE_A_SUSPEND:
650 if (clr & OTG1_DP_PULLUP)
651 break;
652 isp->otg.state = OTG_STATE_A_PERIPHERAL;
653 pr_debug(" --> a_peripheral\n");
654 break;
655 default:
656 break;
657 }
658 OTG_CTRL_REG |= OTG_PULLUP;
659 }
660
08882d20 661 check_state(isp, __func__);
1da177e4
LT		 662 dump_regs(isp, "otg->isp1301");
663}
664
7d12e780 665static irqreturn_t omap_otg_irq(int irq, void *_isp)
1da177e4
LT		 666{
667 u16 otg_irq = OTG_IRQ_SRC_REG;
668 u32 otg_ctrl;
669 int ret = IRQ_NONE;
670 struct isp1301 *isp = _isp;
671
672 /* update ISP1301 transciever from OTG controller */
673 if (otg_irq & OPRT_CHG) {
674 OTG_IRQ_SRC_REG = OPRT_CHG;
675 isp1301_defer_work(isp, WORK_UPDATE_ISP);
676 ret = IRQ_HANDLED;
677
678 /* SRP to become b_peripheral failed */
679 } else if (otg_irq & B_SRP_TMROUT) {
680 pr_debug("otg: B_SRP_TIMEOUT, %06x\n", OTG_CTRL_REG);
681 notresponding(isp);
682
683 /* gadget drivers that care should monitor all kinds of
684 * remote wakeup (SRP, normal) using their own timer
685 * to give "check cable and A-device" messages.
686 */
687 if (isp->otg.state == OTG_STATE_B_SRP_INIT)
688 b_idle(isp, "srp_timeout");
689
690 OTG_IRQ_SRC_REG = B_SRP_TMROUT;
691 ret = IRQ_HANDLED;
692
693 /* HNP to become b_host failed */
694 } else if (otg_irq & B_HNP_FAIL) {
695 pr_debug("otg: %s B_HNP_FAIL, %06x\n",
696 state_name(isp), OTG_CTRL_REG);
697 notresponding(isp);
698
699 otg_ctrl = OTG_CTRL_REG;
700 otg_ctrl |= OTG_BUSDROP;
701 otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
702 OTG_CTRL_REG = otg_ctrl;
703
704 /* subset of b_peripheral()... */
705 isp->otg.state = OTG_STATE_B_PERIPHERAL;
706 pr_debug(" --> b_peripheral\n");
707
708 OTG_IRQ_SRC_REG = B_HNP_FAIL;
709 ret = IRQ_HANDLED;
710
711 /* detect SRP from B-device ... */
712 } else if (otg_irq & A_SRP_DETECT) {
713 pr_debug("otg: %s SRP_DETECT, %06x\n",
714 state_name(isp), OTG_CTRL_REG);
715
716 isp1301_defer_work(isp, WORK_UPDATE_OTG);
717 switch (isp->otg.state) {
718 case OTG_STATE_A_IDLE:
719 if (!isp->otg.host)
720 break;
721 isp1301_defer_work(isp, WORK_HOST_RESUME);
722 otg_ctrl = OTG_CTRL_REG;
723 otg_ctrl |= OTG_A_BUSREQ;
724 otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ)
725 & ~OTG_XCEIV_INPUTS
726 & OTG_CTRL_MASK;
727 OTG_CTRL_REG = otg_ctrl;
728 break;
729 default:
730 break;
731 }
732
733 OTG_IRQ_SRC_REG = A_SRP_DETECT;
734 ret = IRQ_HANDLED;
735
736 /* timer expired: T(a_wait_bcon) and maybe T(a_wait_vrise)
737 * we don't track them separately
738 */
739 } else if (otg_irq & A_REQ_TMROUT) {
740 otg_ctrl = OTG_CTRL_REG;
741 pr_info("otg: BCON_TMOUT from %s, %06x\n",
742 state_name(isp), otg_ctrl);
743 notresponding(isp);
744
745 otg_ctrl |= OTG_BUSDROP;
746 otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
747 OTG_CTRL_REG = otg_ctrl;
748 isp->otg.state = OTG_STATE_A_WAIT_VFALL;
749
750 OTG_IRQ_SRC_REG = A_REQ_TMROUT;
751 ret = IRQ_HANDLED;
752
753 /* A-supplied voltage fell too low; overcurrent */
754 } else if (otg_irq & A_VBUS_ERR) {
755 otg_ctrl = OTG_CTRL_REG;
756 printk(KERN_ERR "otg: %s, VBUS_ERR %04x ctrl %06x\n",
757 state_name(isp), otg_irq, otg_ctrl);
758
759 otg_ctrl |= OTG_BUSDROP;
760 otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
761 OTG_CTRL_REG = otg_ctrl;
762 isp->otg.state = OTG_STATE_A_VBUS_ERR;
763
764 OTG_IRQ_SRC_REG = A_VBUS_ERR;
765 ret = IRQ_HANDLED;
766
767 /* switch driver; the transciever code activates it,
768 * ungating the udc clock or resuming OHCI.
769 */
770 } else if (otg_irq & DRIVER_SWITCH) {
771 int kick = 0;
772
773 otg_ctrl = OTG_CTRL_REG;
774 printk(KERN_NOTICE "otg: %s, SWITCH to %s, ctrl %06x\n",
775 state_name(isp),
776 (otg_ctrl & OTG_DRIVER_SEL)
777 ? "gadget" : "host",
778 otg_ctrl);
779 isp1301_defer_work(isp, WORK_UPDATE_ISP);
780
781 /* role is peripheral */
782 if (otg_ctrl & OTG_DRIVER_SEL) {
783 switch (isp->otg.state) {
784 case OTG_STATE_A_IDLE:
08882d20 785 b_idle(isp, __func__);
1da177e4
LT		 786 break;
787 default:
788 break;
789 }
790 isp1301_defer_work(isp, WORK_UPDATE_ISP);
791
792 /* role is host */
793 } else {
794 if (!(otg_ctrl & OTG_ID)) {
25da383d 795 otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
1da177e4
LT		 796 OTG_CTRL_REG = otg_ctrl | OTG_A_BUSREQ;
797 }
798
799 if (isp->otg.host) {
800 switch (isp->otg.state) {
801 case OTG_STATE_B_WAIT_ACON:
802 isp->otg.state = OTG_STATE_B_HOST;
803 pr_debug(" --> b_host\n");
804 kick = 1;
805 break;
806 case OTG_STATE_A_WAIT_BCON:
807 isp->otg.state = OTG_STATE_A_HOST;
808 pr_debug(" --> a_host\n");
809 break;
810 case OTG_STATE_A_PERIPHERAL:
811 isp->otg.state = OTG_STATE_A_WAIT_BCON;
812 pr_debug(" --> a_wait_bcon\n");
813 break;
814 default:
815 break;
816 }
817 isp1301_defer_work(isp, WORK_HOST_RESUME);
818 }
819 }
820
821 OTG_IRQ_SRC_REG = DRIVER_SWITCH;
822 ret = IRQ_HANDLED;
823
824 if (kick)
825 usb_bus_start_enum(isp->otg.host,
826 isp->otg.host->otg_port);
827 }
828
08882d20 829 check_state(isp, __func__);
1da177e4
LT		 830 return ret;
831}
832
833static struct platform_device *otg_dev;
834
835static int otg_init(struct isp1301 *isp)
836{
837 if (!otg_dev)
838 return -ENODEV;
839
08882d20 840 dump_regs(isp, __func__);
1da177e4
LT		 841 /* some of these values are board-specific... */
842 OTG_SYSCON_2_REG |= OTG_EN
843 /* for B-device: */
844 | SRP_GPDATA /* 9msec Bdev D+ pulse */
845 | SRP_GPDVBUS /* discharge after VBUS pulse */
846 // | (3 << 24) /* 2msec VBUS pulse */
847 /* for A-device: */
848 | (0 << 20) /* 200ms nominal A_WAIT_VRISE timer */
849 | SRP_DPW /* detect 167+ns SRP pulses */
850 | SRP_DATA | SRP_VBUS /* accept both kinds of SRP pulse */
851 ;
852
853 update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE));
854 update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS));
855
08882d20 856 check_state(isp, __func__);
1da177e4 857 pr_debug("otg: %s, %s %06x\n",
08882d20 858 state_name(isp), __func__, OTG_CTRL_REG);
1da177e4
LT		 859
860 OTG_IRQ_EN_REG = DRIVER_SWITCH | OPRT_CHG
861 | B_SRP_TMROUT | B_HNP_FAIL
862 | A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT;
863 OTG_SYSCON_2_REG |= OTG_EN;
864
865 return 0;
866}
867
3ae5eaec 868static int otg_probe(struct platform_device *dev)
1da177e4
LT		 869{
870 // struct omap_usb_config *config = dev->platform_data;
871
3ae5eaec 872 otg_dev = dev;
1da177e4
LT		 873 return 0;
874}
875
3ae5eaec 876static int otg_remove(struct platform_device *dev)
1da177e4
LT		 877{
878 otg_dev = 0;
879 return 0;
880}
881
3ae5eaec 882struct platform_driver omap_otg_driver = {
1da177e4 883 .probe = otg_probe,
3ae5eaec
RK		 884 .remove = otg_remove,
885 .driver = {
886 .owner = THIS_MODULE,
887 .name = "omap_otg",
888 },
1da177e4
LT		 889};
890
891static int otg_bind(struct isp1301 *isp)
892{
893 int status;
894
895 if (otg_dev)
896 return -EBUSY;
897
3ae5eaec 898 status = platform_driver_register(&omap_otg_driver);
1da177e4
LT		 899 if (status < 0)
900 return status;
901
902 if (otg_dev)
903 status = request_irq(otg_dev->resource[1].start, omap_otg_irq,
dace1453 904 IRQF_DISABLED, DRIVER_NAME, isp);
1da177e4
LT		 905 else
906 status = -ENODEV;
907
908 if (status < 0)
3ae5eaec 909 platform_driver_unregister(&omap_otg_driver);
1da177e4
LT		 910 return status;
911}
912
913static void otg_unbind(struct isp1301 *isp)
914{
915 if (!otg_dev)
916 return;
917 free_irq(otg_dev->resource[1].start, isp);
918}
919
920#else
921
922/* OTG controller isn't clocked */
923
924#endif /* CONFIG_USB_OTG */
925
926/*-------------------------------------------------------------------------*/
927
928static void b_peripheral(struct isp1301 *isp)
929{
930 OTG_CTRL_REG = OTG_CTRL_REG & OTG_XCEIV_OUTPUTS;
931 usb_gadget_vbus_connect(isp->otg.gadget);
932
933#ifdef CONFIG_USB_OTG
934 enable_vbus_draw(isp, 8);
935 otg_update_isp(isp);
936#else
937 enable_vbus_draw(isp, 100);
938 /* UDC driver just set OTG_BSESSVLD */
939 isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLUP);
940 isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLDOWN);
941 isp->otg.state = OTG_STATE_B_PERIPHERAL;
942 pr_debug(" --> b_peripheral\n");
943 dump_regs(isp, "2periph");
944#endif
945}
946
947static void isp_update_otg(struct isp1301 *isp, u8 stat)
948{
949 u8 isp_stat, isp_bstat;
950 enum usb_otg_state state = isp->otg.state;
951
952 if (stat & INTR_BDIS_ACON)
953 pr_debug("OTG: BDIS_ACON, %s\n", state_name(isp));
954
955 /* start certain state transitions right away */
956 isp_stat = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE);
957 if (isp_stat & INTR_ID_GND) {
958 if (isp->otg.default_a) {
959 switch (state) {
960 case OTG_STATE_B_IDLE:
961 a_idle(isp, "idle");
962 /* FALLTHROUGH */
963 case OTG_STATE_A_IDLE:
964 enable_vbus_source(isp);
965 /* FALLTHROUGH */
966 case OTG_STATE_A_WAIT_VRISE:
967 /* we skip over OTG_STATE_A_WAIT_BCON, since
968 * the HC will transition to A_HOST (or
969 * A_SUSPEND!) without our noticing except
970 * when HNP is used.
971 */
972 if (isp_stat & INTR_VBUS_VLD)
973 isp->otg.state = OTG_STATE_A_HOST;
974 break;
975 case OTG_STATE_A_WAIT_VFALL:
976 if (!(isp_stat & INTR_SESS_VLD))
977 a_idle(isp, "vfell");
978 break;
979 default:
980 if (!(isp_stat & INTR_VBUS_VLD))
981 isp->otg.state = OTG_STATE_A_VBUS_ERR;
982 break;
983 }
984 isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
985 } else {
986 switch (state) {
987 case OTG_STATE_B_PERIPHERAL:
988 case OTG_STATE_B_HOST:
989 case OTG_STATE_B_WAIT_ACON:
990 usb_gadget_vbus_disconnect(isp->otg.gadget);
991 break;
992 default:
993 break;
994 }
995 if (state != OTG_STATE_A_IDLE)
996 a_idle(isp, "id");
997 if (isp->otg.host && state == OTG_STATE_A_IDLE)
998 isp1301_defer_work(isp, WORK_HOST_RESUME);
999 isp_bstat = 0;
1000 }
1001 } else {
1002 /* if user unplugged mini-A end of cable,
1003 * don't bypass A_WAIT_VFALL.
1004 */
1005 if (isp->otg.default_a) {
1006 switch (state) {
1007 default:
1008 isp->otg.state = OTG_STATE_A_WAIT_VFALL;
1009 break;
1010 case OTG_STATE_A_WAIT_VFALL:
1011 state = OTG_STATE_A_IDLE;
1012 /* khubd may take a while to notice and
1013 * handle this disconnect, so don't go
1014 * to B_IDLE quite yet.
1015 */
1016 break;
1017 case OTG_STATE_A_IDLE:
1018 host_suspend(isp);
1019 isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1,
1020 MC1_BDIS_ACON_EN);
1021 isp->otg.state = OTG_STATE_B_IDLE;
1022 OTG_CTRL_REG &= OTG_CTRL_REG & OTG_CTRL_MASK
1023 & ~OTG_CTRL_BITS;
1024 break;
1025 case OTG_STATE_B_IDLE:
1026 break;
1027 }
1028 }
1029 isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
1030
1031 switch (isp->otg.state) {
1032 case OTG_STATE_B_PERIPHERAL:
1033 case OTG_STATE_B_WAIT_ACON:
1034 case OTG_STATE_B_HOST:
1035 if (likely(isp_bstat & OTG_B_SESS_VLD))
1036 break;
1037 enable_vbus_draw(isp, 0);
1038#ifndef CONFIG_USB_OTG
1039 /* UDC driver will clear OTG_BSESSVLD */
1040 isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1,
1041 OTG1_DP_PULLDOWN);
1042 isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1,
1043 OTG1_DP_PULLUP);
08882d20 1044 dump_regs(isp, __func__);
1da177e4
LT		 1045#endif
1046 /* FALLTHROUGH */
1047 case OTG_STATE_B_SRP_INIT:
08882d20 1048 b_idle(isp, __func__);
1da177e4
LT		 1049 OTG_CTRL_REG &= OTG_CTRL_REG & OTG_XCEIV_OUTPUTS;
1050 /* FALLTHROUGH */
1051 case OTG_STATE_B_IDLE:
1052 if (isp->otg.gadget && (isp_bstat & OTG_B_SESS_VLD)) {
1053#ifdef CONFIG_USB_OTG
1054 update_otg1(isp, isp_stat);
1055 update_otg2(isp, isp_bstat);
1056#endif
1057 b_peripheral(isp);
1058 } else if (!(isp_stat & (INTR_VBUS_VLD|INTR_SESS_VLD)))
1059 isp_bstat |= OTG_B_SESS_END;
1060 break;
1061 case OTG_STATE_A_WAIT_VFALL:
1062 break;
1063 default:
1064 pr_debug("otg: unsupported b-device %s\n",
1065 state_name(isp));
1066 break;
1067 }
1068 }
1069
1070 if (state != isp->otg.state)
1071 pr_debug(" isp, %s -> %s\n",
1072 state_string(state), state_name(isp));
1073
1074#ifdef CONFIG_USB_OTG
1075 /* update the OTG controller state to match the isp1301; may
1076 * trigger OPRT_CHG irqs for changes going to the isp1301.
1077 */
1078 update_otg1(isp, isp_stat);
1079 update_otg2(isp, isp_bstat);
08882d20 1080 check_state(isp, __func__);
1da177e4
LT		 1081#endif
1082
1083 dump_regs(isp, "isp1301->otg");
1084}
1085
1086/*-------------------------------------------------------------------------*/
1087
1088static u8 isp1301_clear_latch(struct isp1301 *isp)
1089{
1090 u8 latch = isp1301_get_u8(isp, ISP1301_INTERRUPT_LATCH);
1091 isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, latch);
1092 return latch;
1093}
1094
1095static void
25da383d 1096isp1301_work(struct work_struct *work)
1da177e4 1097{
25da383d 1098 struct isp1301 *isp = container_of(work, struct isp1301, work);
1da177e4
LT		 1099 int stop;
1100
1101 /* implicit lock: we're the only task using this device */
1102 isp->working = 1;
1103 do {
1104 stop = test_bit(WORK_STOP, &isp->todo);
1105
1106#ifdef CONFIG_USB_OTG
1107 /* transfer state from otg engine to isp1301 */
1108 if (test_and_clear_bit(WORK_UPDATE_ISP, &isp->todo)) {
1109 otg_update_isp(isp);
1110 put_device(&isp->client.dev);
1111 }
1112#endif
1113 /* transfer state from isp1301 to otg engine */
1114 if (test_and_clear_bit(WORK_UPDATE_OTG, &isp->todo)) {
1115 u8 stat = isp1301_clear_latch(isp);
1116
1117 isp_update_otg(isp, stat);
1118 put_device(&isp->client.dev);
1119 }
1120
1121 if (test_and_clear_bit(WORK_HOST_RESUME, &isp->todo)) {
1122 u32 otg_ctrl;
1123
1124 /*
1125 * skip A_WAIT_VRISE; hc transitions invisibly
1126 * skip A_WAIT_BCON; same.
1127 */
1128 switch (isp->otg.state) {
1129 case OTG_STATE_A_WAIT_BCON:
1130 case OTG_STATE_A_WAIT_VRISE:
1131 isp->otg.state = OTG_STATE_A_HOST;
1132 pr_debug(" --> a_host\n");
1133 otg_ctrl = OTG_CTRL_REG;
1134 otg_ctrl |= OTG_A_BUSREQ;
1135 otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ)
1136 & OTG_CTRL_MASK;
1137 OTG_CTRL_REG = otg_ctrl;
1138 break;
1139 case OTG_STATE_B_WAIT_ACON:
1140 isp->otg.state = OTG_STATE_B_HOST;
1141 pr_debug(" --> b_host (acon)\n");
1142 break;
1143 case OTG_STATE_B_HOST:
1144 case OTG_STATE_B_IDLE:
1145 case OTG_STATE_A_IDLE:
1146 break;
1147 default:
1148 pr_debug(" host resume in %s\n",
1149 state_name(isp));
1150 }
1151 host_resume(isp);
1152 // mdelay(10);
1153 put_device(&isp->client.dev);
1154 }
1155
1156 if (test_and_clear_bit(WORK_TIMER, &isp->todo)) {
1157#ifdef VERBOSE
1158 dump_regs(isp, "timer");
1159 if (!stop)
1160 mod_timer(&isp->timer, jiffies + TIMER_JIFFIES);
1161#endif
1162 put_device(&isp->client.dev);
1163 }
1164
1165 if (isp->todo)
1166 dev_vdbg(&isp->client.dev,
1167 "work done, todo = 0x%lx\n",
1168 isp->todo);
1169 if (stop) {
1170 dev_dbg(&isp->client.dev, "stop\n");
1171 break;
1172 }
1173 } while (isp->todo);
1174 isp->working = 0;
1175}
1176
7d12e780 1177static irqreturn_t isp1301_irq(int irq, void *isp)
1da177e4
LT		 1178{
1179 isp1301_defer_work(isp, WORK_UPDATE_OTG);
1180 return IRQ_HANDLED;
1181}
1182
1183static void isp1301_timer(unsigned long _isp)
1184{
1185 isp1301_defer_work((void *)_isp, WORK_TIMER);
1186}
1187
1188/*-------------------------------------------------------------------------*/
1189
1190static void isp1301_release(struct device *dev)
1191{
1192 struct isp1301 *isp;
1193
1194 isp = container_of(dev, struct isp1301, client.dev);
1195
1196 /* ugly -- i2c hijacks our memory hook to wait_for_completion() */
1197 if (isp->i2c_release)
1198 isp->i2c_release(dev);
1199 kfree (isp);
1200}
1201
1202static struct isp1301 *the_transceiver;
1203
1204static int isp1301_detach_client(struct i2c_client *i2c)
1205{
1206 struct isp1301 *isp;
1207
1208 isp = container_of(i2c, struct isp1301, client);
1209
1210 isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0);
1211 isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0);
1212 free_irq(isp->irq, isp);
1213#ifdef CONFIG_USB_OTG
1214 otg_unbind(isp);
1215#endif
1216 if (machine_is_omap_h2())
1217 omap_free_gpio(2);
1218
1219 isp->timer.data = 0;
1220 set_bit(WORK_STOP, &isp->todo);
1221 del_timer_sync(&isp->timer);
1222 flush_scheduled_work();
1223
1224 put_device(&i2c->dev);
1225 the_transceiver = 0;
1226
1227 return i2c_detach_client(i2c);
1228}
1229
1230/*-------------------------------------------------------------------------*/
1231
1232/* NOTE: three modes are possible here, only one of which
1233 * will be standards-conformant on any given system:
1234 *
1235 * - OTG mode (dual-role), required if there's a Mini-AB connector
1236 * - HOST mode, for when there's one or more A (host) connectors
1237 * - DEVICE mode, for when there's a B/Mini-B (device) connector
1238 *
1239 * As a rule, you won't have an isp1301 chip unless it's there to
25da383d 1240 * support the OTG mode. Other modes help testing USB controllers
1da177e4
LT		 1241 * in isolation from (full) OTG support, or maybe so later board
1242 * revisions can help to support those feature.
1243 */
1244
1245#ifdef CONFIG_USB_OTG
1246
1247static int isp1301_otg_enable(struct isp1301 *isp)
1248{
1249 power_up(isp);
1250 otg_init(isp);
1251
1252 /* NOTE: since we don't change this, this provides
1253 * a few more interrupts than are strictly needed.
1254 */
1255 isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
25da383d 1256 INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
1da177e4 1257 isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
25da383d 1258 INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
1da177e4
LT		 1259
1260 dev_info(&isp->client.dev, "ready for dual-role USB ...\n");
1261
1262 return 0;
1263}
1264
1265#endif
1266
1267/* add or disable the host device+driver */
1268static int
1269isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host)
1270{
1271 struct isp1301 *isp = container_of(otg, struct isp1301, otg);
1272
1273 if (!otg || isp != the_transceiver)
1274 return -ENODEV;
1275
1276 if (!host) {
1277 OTG_IRQ_EN_REG = 0;
1278 power_down(isp);
1279 isp->otg.host = 0;
1280 return 0;
1281 }
1282
1283#ifdef CONFIG_USB_OTG
1284 isp->otg.host = host;
1285 dev_dbg(&isp->client.dev, "registered host\n");
1286 host_suspend(isp);
1287 if (isp->otg.gadget)
1288 return isp1301_otg_enable(isp);
1289 return 0;
1290
1291#elif !defined(CONFIG_USB_GADGET_OMAP)
1292 // FIXME update its refcount
1293 isp->otg.host = host;
1294
1295 power_up(isp);
1296
1297 if (machine_is_omap_h2())
1298 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
1299
1300 dev_info(&isp->client.dev, "A-Host sessions ok\n");
1301 isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
25da383d 1302 INTR_ID_GND);
1da177e4 1303 isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
25da383d 1304 INTR_ID_GND);
1da177e4
LT		 1305
1306 /* If this has a Mini-AB connector, this mode is highly
1307 * nonstandard ... but can be handy for testing, especially with
1308 * the Mini-A end of an OTG cable. (Or something nonstandard
1309 * like MiniB-to-StandardB, maybe built with a gender mender.)
1310 */
1311 isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_VBUS_DRV);
1312
08882d20 1313 dump_regs(isp, __func__);
1da177e4
LT		 1314
1315 return 0;
1316
1317#else
1318 dev_dbg(&isp->client.dev, "host sessions not allowed\n");
1319 return -EINVAL;
1320#endif
1321
1322}
1323
1324static int
1325isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
1326{
1327 struct isp1301 *isp = container_of(otg, struct isp1301, otg);
1328
1329 if (!otg || isp != the_transceiver)
1330 return -ENODEV;
1331
1332 if (!gadget) {
1333 OTG_IRQ_EN_REG = 0;
1334 if (!isp->otg.default_a)
1335 enable_vbus_draw(isp, 0);
1336 usb_gadget_vbus_disconnect(isp->otg.gadget);
1337 isp->otg.gadget = 0;
1338 power_down(isp);
1339 return 0;
1340 }
1341
1342#ifdef CONFIG_USB_OTG
1343 isp->otg.gadget = gadget;
1344 dev_dbg(&isp->client.dev, "registered gadget\n");
1345 /* gadget driver may be suspended until vbus_connect () */
1346 if (isp->otg.host)
1347 return isp1301_otg_enable(isp);
1348 return 0;
1349
1350#elif !defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OHCI_HCD_MODULE)
1351 isp->otg.gadget = gadget;
1352 // FIXME update its refcount
1353
1354 OTG_CTRL_REG = (OTG_CTRL_REG & OTG_CTRL_MASK
1355 & ~(OTG_XCEIV_OUTPUTS|OTG_CTRL_BITS))
1356 | OTG_ID;
1357 power_up(isp);
1358 isp->otg.state = OTG_STATE_B_IDLE;
1359
1360 if (machine_is_omap_h2())
1361 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
1362
1363 isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
25da383d 1364 INTR_SESS_VLD);
1da177e4 1365 isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
25da383d 1366 INTR_VBUS_VLD);
1da177e4 1367 dev_info(&isp->client.dev, "B-Peripheral sessions ok\n");
08882d20 1368 dump_regs(isp, __func__);
1da177e4
LT		 1369
1370 /* If this has a Mini-AB connector, this mode is highly
1371 * nonstandard ... but can be handy for testing, so long
1372 * as you don't plug a Mini-A cable into the jack.
1373 */
1374 if (isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE) & INTR_VBUS_VLD)
1375 b_peripheral(isp);
1376
1377 return 0;
1378
1379#else
1380 dev_dbg(&isp->client.dev, "peripheral sessions not allowed\n");
1381 return -EINVAL;
1382#endif
1383}
1384
1385
1386/*-------------------------------------------------------------------------*/
1387
1388static int
1389isp1301_set_power(struct otg_transceiver *dev, unsigned mA)
1390{
1391 if (!the_transceiver)
1392 return -ENODEV;
1393 if (dev->state == OTG_STATE_B_PERIPHERAL)
1394 enable_vbus_draw(the_transceiver, mA);
1395 return 0;
1396}
1397
1398static int
1399isp1301_start_srp(struct otg_transceiver *dev)
1400{
1401 struct isp1301 *isp = container_of(dev, struct isp1301, otg);
1402 u32 otg_ctrl;
1403
1404 if (!dev || isp != the_transceiver
1405 || isp->otg.state != OTG_STATE_B_IDLE)
1406 return -ENODEV;
1407
1408 otg_ctrl = OTG_CTRL_REG;
1409 if (!(otg_ctrl & OTG_BSESSEND))
1410 return -EINVAL;
1411
1412 otg_ctrl |= OTG_B_BUSREQ;
1413 otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK;
1414 OTG_CTRL_REG = otg_ctrl;
1415 isp->otg.state = OTG_STATE_B_SRP_INIT;
1416
1417 pr_debug("otg: SRP, %s ... %06x\n", state_name(isp), OTG_CTRL_REG);
1418#ifdef CONFIG_USB_OTG
08882d20 1419 check_state(isp, __func__);
1da177e4
LT		 1420#endif
1421 return 0;
1422}
1423
1424static int
1425isp1301_start_hnp(struct otg_transceiver *dev)
1426{
1427#ifdef CONFIG_USB_OTG
1428 struct isp1301 *isp = container_of(dev, struct isp1301, otg);
1429
1430 if (!dev || isp != the_transceiver)
1431 return -ENODEV;
1432 if (isp->otg.default_a && (isp->otg.host == NULL
1433 || !isp->otg.host->b_hnp_enable))
1434 return -ENOTCONN;
1435 if (!isp->otg.default_a && (isp->otg.gadget == NULL
1436 || !isp->otg.gadget->b_hnp_enable))
1437 return -ENOTCONN;
1438
1439 /* We want hardware to manage most HNP protocol timings.
1440 * So do this part as early as possible...
1441 */
1442 switch (isp->otg.state) {
1443 case OTG_STATE_B_HOST:
1444 isp->otg.state = OTG_STATE_B_PERIPHERAL;
1445 /* caller will suspend next */
1446 break;
1447 case OTG_STATE_A_HOST:
1448#if 0
1449 /* autoconnect mode avoids irq latency bugs */
1450 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1,
1451 MC1_BDIS_ACON_EN);
1452#endif
1453 /* caller must suspend then clear A_BUSREQ */
1454 usb_gadget_vbus_connect(isp->otg.gadget);
1455 OTG_CTRL_REG |= OTG_A_SETB_HNPEN;
1456
1457 break;
1458 case OTG_STATE_A_PERIPHERAL:
1459 /* initiated by B-Host suspend */
1460 break;
1461 default:
1462 return -EILSEQ;
1463 }
1464 pr_debug("otg: HNP %s, %06x ...\n",
1465 state_name(isp), OTG_CTRL_REG);
08882d20 1466 check_state(isp, __func__);
1da177e4
LT		 1467 return 0;
1468#else
1469 /* srp-only */
1470 return -EINVAL;
1471#endif
1472}
1473
1474/*-------------------------------------------------------------------------*/
1475
1476/* no error returns, they'd just make bus scanning stop */
1477static int isp1301_probe(struct i2c_adapter *bus, int address, int kind)
1478{
1479 int status;
1480 struct isp1301 *isp;
1481 struct i2c_client *i2c;
1482
1483 if (the_transceiver)
1484 return 0;
1485
82ca76b6 1486 isp = kzalloc(sizeof *isp, GFP_KERNEL);
1da177e4
LT		 1487 if (!isp)
1488 return 0;
1489
25da383d 1490 INIT_WORK(&isp->work, isp1301_work);
1da177e4
LT		 1491 init_timer(&isp->timer);
1492 isp->timer.function = isp1301_timer;
1493 isp->timer.data = (unsigned long) isp;
1494
1495 isp->irq = -1;
1496 isp->client.addr = address;
1497 i2c_set_clientdata(&isp->client, isp);
1498 isp->client.adapter = bus;
1499 isp->client.driver = &isp1301_driver;
1500 strlcpy(isp->client.name, DRIVER_NAME, I2C_NAME_SIZE);
1501 i2c = &isp->client;
1502
1503 /* if this is a true probe, verify the chip ... */
1504 if (kind < 0) {
1505 status = isp1301_get_u16(isp, ISP1301_VENDOR_ID);
1506 if (status != I2C_VENDOR_ID_PHILIPS) {
1507 dev_dbg(&bus->dev, "addr %d not philips id: %d\n",
1508 address, status);
1509 goto fail1;
1510 }
1511 status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID);
1512 if (status != I2C_PRODUCT_ID_PHILIPS_1301) {
1513 dev_dbg(&bus->dev, "%d not isp1301, %d\n",
1514 address, status);
1515 goto fail1;
1516 }
1517 }
1518
1519 status = i2c_attach_client(i2c);
1520 if (status < 0) {
1521 dev_dbg(&bus->dev, "can't attach %s to device %d, err %d\n",
1522 DRIVER_NAME, address, status);
1523fail1:
1524 kfree(isp);
1525 return 0;
1526 }
1527 isp->i2c_release = i2c->dev.release;
1528 i2c->dev.release = isp1301_release;
1529
1530 /* initial development used chiprev 2.00 */
1531 status = i2c_smbus_read_word_data(i2c, ISP1301_BCD_DEVICE);
1532 dev_info(&i2c->dev, "chiprev %x.%02x, driver " DRIVER_VERSION "\n",
1533 status >> 8, status & 0xff);
1534
1535 /* make like power-on reset */
1536 isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_MASK);
1537
1538 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_BI_DI);
1539 isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, ~MC2_BI_DI);
1540
1541 isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1,
1542 OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN);
1543 isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1,
1544 ~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
1545
1546 isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, ~0);
1547 isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0);
1548 isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0);
1549
1550#ifdef CONFIG_USB_OTG
1551 status = otg_bind(isp);
1552 if (status < 0) {
1553 dev_dbg(&i2c->dev, "can't bind OTG\n");
1554 goto fail2;
1555 }
1556#endif
1557
1558 if (machine_is_omap_h2()) {
1559 /* full speed signaling by default */
1560 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1,
1561 MC1_SPEED_REG);
1562 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2,
1563 MC2_SPD_SUSP_CTRL);
1564
1565 /* IRQ wired at M14 */
1566 omap_cfg_reg(M14_1510_GPIO2);
1567 isp->irq = OMAP_GPIO_IRQ(2);
25da383d
DB		 1568 if (gpio_request(2, "isp1301") == 0)
1569 gpio_direction_input(2);
1570 isp->irq_type = IRQF_TRIGGER_FALLING;
1da177e4
LT		 1571 }
1572
25da383d 1573 isp->irq_type |= IRQF_SAMPLE_RANDOM;
1da177e4 1574 status = request_irq(isp->irq, isp1301_irq,
25da383d 1575 isp->irq_type, DRIVER_NAME, isp);
1da177e4
LT		 1576 if (status < 0) {
1577 dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n",
1578 isp->irq, status);
1579#ifdef CONFIG_USB_OTG
1580fail2:
1581#endif
1582 i2c_detach_client(i2c);
1583 goto fail1;
1584 }
1585
1586 isp->otg.dev = &isp->client.dev;
1587 isp->otg.label = DRIVER_NAME;
1588
1589 isp->otg.set_host = isp1301_set_host,
1590 isp->otg.set_peripheral = isp1301_set_peripheral,
1591 isp->otg.set_power = isp1301_set_power,
1592 isp->otg.start_srp = isp1301_start_srp,
1593 isp->otg.start_hnp = isp1301_start_hnp,
1594
1595 enable_vbus_draw(isp, 0);
1596 power_down(isp);
1597 the_transceiver = isp;
1598
1599#ifdef CONFIG_USB_OTG
1600 update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE));
1601 update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS));
1602#endif
1603
08882d20 1604 dump_regs(isp, __func__);
1da177e4
LT		 1605
1606#ifdef VERBOSE
1607 mod_timer(&isp->timer, jiffies + TIMER_JIFFIES);
1608 dev_dbg(&i2c->dev, "scheduled timer, %d min\n", TIMER_MINUTES);
1609#endif
1610
1611 status = otg_set_transceiver(&isp->otg);
1612 if (status < 0)
1613 dev_err(&i2c->dev, "can't register transceiver, %d\n",
1614 status);
1615
1616 return 0;
1617}
1618
1619static int isp1301_scan_bus(struct i2c_adapter *bus)
1620{
1621 if (!i2c_check_functionality(bus, I2C_FUNC_SMBUS_BYTE_DATA
1622 | I2C_FUNC_SMBUS_READ_WORD_DATA))
1623 return -EINVAL;
1624 return i2c_probe(bus, &addr_data, isp1301_probe);
1625}
1626
1627static struct i2c_driver isp1301_driver = {
a9718b0c 1628 .driver = {
a9718b0c
LR		 1629 .name = "isp1301_omap",
1630 },
1da177e4
LT		 1631 .attach_adapter = isp1301_scan_bus,
1632 .detach_client = isp1301_detach_client,
1633};
1634
1635/*-------------------------------------------------------------------------*/
1636
1637static int __init isp_init(void)
1638{
1639 return i2c_add_driver(&isp1301_driver);
1640}
1641module_init(isp_init);
1642
1643static void __exit isp_exit(void)
1644{
1645 if (the_transceiver)
1646 otg_set_transceiver(0);
1647 i2c_del_driver(&isp1301_driver);
1648}
1649module_exit(isp_exit);
1650
Linux kernel - Deliverables
This page took 0.41707 seconds and 5 git commands to generate.