Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
d3f20848 BP |
2 | * IDE ATAPI floppy driver. |
3 | * | |
59bca8cc BZ |
4 | * Copyright (C) 1996-1999 Gadi Oxman <gadio@netvision.net.il> |
5 | * Copyright (C) 2000-2002 Paul Bristow <paul@paulbristow.net> | |
6 | * Copyright (C) 2005 Bartlomiej Zolnierkiewicz | |
0571c7a4 | 7 | * |
1da177e4 LT |
8 | * This driver supports the following IDE floppy drives: |
9 | * | |
10 | * LS-120/240 SuperDisk | |
11 | * Iomega Zip 100/250 | |
12 | * Iomega PC Card Clik!/PocketZip | |
13 | * | |
d3f20848 BP |
14 | * For a historical changelog see |
15 | * Documentation/ide/ChangeLog.ide-floppy.1996-2002 | |
1da177e4 LT |
16 | */ |
17 | ||
51509eec BZ |
18 | #define DRV_NAME "ide-floppy" |
19 | ||
fc6c5bc7 | 20 | #define IDEFLOPPY_VERSION "1.00" |
1da177e4 | 21 | |
1da177e4 LT |
22 | #include <linux/module.h> |
23 | #include <linux/types.h> | |
24 | #include <linux/string.h> | |
25 | #include <linux/kernel.h> | |
26 | #include <linux/delay.h> | |
27 | #include <linux/timer.h> | |
28 | #include <linux/mm.h> | |
29 | #include <linux/interrupt.h> | |
30 | #include <linux/major.h> | |
31 | #include <linux/errno.h> | |
32 | #include <linux/genhd.h> | |
33 | #include <linux/slab.h> | |
34 | #include <linux/cdrom.h> | |
35 | #include <linux/ide.h> | |
3ceca727 | 36 | #include <linux/hdreg.h> |
1da177e4 | 37 | #include <linux/bitops.h> |
cf8b8975 | 38 | #include <linux/mutex.h> |
b98b3409 | 39 | #include <linux/scatterlist.h> |
1da177e4 | 40 | |
89636af2 BZ |
41 | #include <scsi/scsi_ioctl.h> |
42 | ||
1da177e4 | 43 | #include <asm/byteorder.h> |
7e8b163b BP |
44 | #include <linux/irq.h> |
45 | #include <linux/uaccess.h> | |
46 | #include <linux/io.h> | |
1da177e4 LT |
47 | #include <asm/unaligned.h> |
48 | ||
0127854d BZ |
49 | #include "ide-floppy.h" |
50 | ||
f373bd82 | 51 | /* define to see debug info */ |
1da177e4 | 52 | #define IDEFLOPPY_DEBUG_LOG 0 |
1da177e4 LT |
53 | |
54 | /* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */ | |
0571c7a4 | 55 | #define IDEFLOPPY_DEBUG(fmt, args...) |
1da177e4 LT |
56 | |
57 | #if IDEFLOPPY_DEBUG_LOG | |
bcc77d9c BP |
58 | #define debug_log(fmt, args...) \ |
59 | printk(KERN_INFO "ide-floppy: " fmt, ## args) | |
1da177e4 | 60 | #else |
0571c7a4 | 61 | #define debug_log(fmt, args...) do {} while (0) |
1da177e4 LT |
62 | #endif |
63 | ||
1da177e4 | 64 | /* |
0571c7a4 BP |
65 | * After each failed packet command we issue a request sense command and retry |
66 | * the packet command IDEFLOPPY_MAX_PC_RETRIES times. | |
1da177e4 LT |
67 | */ |
68 | #define IDEFLOPPY_MAX_PC_RETRIES 3 | |
69 | ||
194ec0c0 | 70 | /* format capacities descriptor codes */ |
1da177e4 LT |
71 | #define CAPACITY_INVALID 0x00 |
72 | #define CAPACITY_UNFORMATTED 0x01 | |
73 | #define CAPACITY_CURRENT 0x02 | |
74 | #define CAPACITY_NO_CARTRIDGE 0x03 | |
75 | ||
c40d3d38 | 76 | #define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */ |
1da177e4 | 77 | |
0571c7a4 | 78 | /* Error code returned in rq->errors to the higher part of the driver. */ |
1da177e4 LT |
79 | #define IDEFLOPPY_ERROR_GENERAL 101 |
80 | ||
cf8b8975 | 81 | static DEFINE_MUTEX(idefloppy_ref_mutex); |
1da177e4 LT |
82 | |
83 | #define to_ide_floppy(obj) container_of(obj, struct ide_floppy_obj, kref) | |
84 | ||
85 | #define ide_floppy_g(disk) \ | |
86 | container_of((disk)->private_data, struct ide_floppy_obj, driver) | |
87 | ||
08da591e BZ |
88 | static void idefloppy_cleanup_obj(struct kref *); |
89 | ||
1da177e4 LT |
90 | static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk) |
91 | { | |
92 | struct ide_floppy_obj *floppy = NULL; | |
93 | ||
cf8b8975 | 94 | mutex_lock(&idefloppy_ref_mutex); |
1da177e4 | 95 | floppy = ide_floppy_g(disk); |
08da591e | 96 | if (floppy) { |
d3e33ff5 | 97 | if (ide_device_get(floppy->drive)) |
08da591e | 98 | floppy = NULL; |
d3e33ff5 BZ |
99 | else |
100 | kref_get(&floppy->kref); | |
08da591e | 101 | } |
cf8b8975 | 102 | mutex_unlock(&idefloppy_ref_mutex); |
1da177e4 LT |
103 | return floppy; |
104 | } | |
105 | ||
1da177e4 LT |
106 | static void ide_floppy_put(struct ide_floppy_obj *floppy) |
107 | { | |
d3e33ff5 BZ |
108 | ide_drive_t *drive = floppy->drive; |
109 | ||
cf8b8975 | 110 | mutex_lock(&idefloppy_ref_mutex); |
9a24b63d | 111 | kref_put(&floppy->kref, idefloppy_cleanup_obj); |
d3e33ff5 | 112 | ide_device_put(drive); |
cf8b8975 | 113 | mutex_unlock(&idefloppy_ref_mutex); |
1da177e4 LT |
114 | } |
115 | ||
1da177e4 | 116 | /* |
0571c7a4 BP |
117 | * Used to finish servicing a request. For read/write requests, we will call |
118 | * ide_end_request to pass to the next buffer. | |
1da177e4 | 119 | */ |
c2b2b293 | 120 | static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs) |
1da177e4 LT |
121 | { |
122 | idefloppy_floppy_t *floppy = drive->driver_data; | |
123 | struct request *rq = HWGROUP(drive)->rq; | |
124 | int error; | |
125 | ||
bcc77d9c | 126 | debug_log("Reached %s\n", __func__); |
1da177e4 LT |
127 | |
128 | switch (uptodate) { | |
0571c7a4 BP |
129 | case 0: error = IDEFLOPPY_ERROR_GENERAL; break; |
130 | case 1: error = 0; break; | |
131 | default: error = uptodate; | |
1da177e4 LT |
132 | } |
133 | if (error) | |
134 | floppy->failed_pc = NULL; | |
135 | /* Why does this happen? */ | |
136 | if (!rq) | |
137 | return 0; | |
4aff5e23 | 138 | if (!blk_special_request(rq)) { |
1da177e4 LT |
139 | /* our real local end request function */ |
140 | ide_end_request(drive, uptodate, nsecs); | |
141 | return 0; | |
142 | } | |
143 | rq->errors = error; | |
144 | /* fixme: need to move this local also */ | |
145 | ide_end_drive_cmd(drive, 0, 0); | |
146 | return 0; | |
147 | } | |
148 | ||
8e555123 BP |
149 | static void idefloppy_update_buffers(ide_drive_t *drive, |
150 | struct ide_atapi_pc *pc) | |
1da177e4 LT |
151 | { |
152 | struct request *rq = pc->rq; | |
153 | struct bio *bio = rq->bio; | |
154 | ||
155 | while ((bio = rq->bio) != NULL) | |
c2b2b293 | 156 | idefloppy_end_request(drive, 1, 0); |
1da177e4 LT |
157 | } |
158 | ||
b14c7212 | 159 | static void ide_floppy_callback(ide_drive_t *drive, int dsc) |
1da177e4 LT |
160 | { |
161 | idefloppy_floppy_t *floppy = drive->driver_data; | |
2b9efba4 | 162 | struct ide_atapi_pc *pc = drive->pc; |
81f49382 | 163 | int uptodate = pc->error ? 0 : 1; |
1da177e4 | 164 | |
bcc77d9c BP |
165 | debug_log("Reached %s\n", __func__); |
166 | ||
dd2e9a03 BZ |
167 | if (floppy->failed_pc == pc) |
168 | floppy->failed_pc = NULL; | |
169 | ||
81f49382 BP |
170 | if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 || |
171 | (pc->rq && blk_pc_request(pc->rq))) | |
172 | uptodate = 1; /* FIXME */ | |
173 | else if (pc->c[0] == GPCMD_REQUEST_SENSE) { | |
2b9efba4 | 174 | u8 *buf = pc->buf; |
a6ff2d3b | 175 | |
81f49382 BP |
176 | if (!pc->error) { |
177 | floppy->sense_key = buf[2] & 0x0F; | |
178 | floppy->asc = buf[12]; | |
179 | floppy->ascq = buf[13]; | |
180 | floppy->progress_indication = buf[15] & 0x80 ? | |
181 | (u16)get_unaligned((u16 *)&buf[16]) : 0x10000; | |
a6ff2d3b | 182 | |
81f49382 BP |
183 | if (floppy->failed_pc) |
184 | debug_log("pc = %x, ", floppy->failed_pc->c[0]); | |
bcc77d9c | 185 | |
81f49382 BP |
186 | debug_log("sense key = %x, asc = %x, ascq = %x\n", |
187 | floppy->sense_key, floppy->asc, floppy->ascq); | |
188 | } else | |
189 | printk(KERN_ERR "Error in REQUEST SENSE itself - " | |
190 | "Aborting request!\n"); | |
191 | } | |
1da177e4 | 192 | |
81f49382 | 193 | idefloppy_end_request(drive, uptodate, 0); |
1da177e4 LT |
194 | } |
195 | ||
0127854d | 196 | void ide_floppy_create_request_sense_cmd(struct ide_atapi_pc *pc) |
1da177e4 | 197 | { |
7bf7420a | 198 | ide_init_pc(pc); |
30d67099 | 199 | pc->c[0] = GPCMD_REQUEST_SENSE; |
1da177e4 | 200 | pc->c[4] = 255; |
8e555123 | 201 | pc->req_xfer = 18; |
1da177e4 LT |
202 | } |
203 | ||
204 | /* | |
0571c7a4 BP |
205 | * Called when an error was detected during the last packet command. We queue a |
206 | * request sense packet command in the head of the request list. | |
1da177e4 | 207 | */ |
0571c7a4 | 208 | static void idefloppy_retry_pc(ide_drive_t *drive) |
1da177e4 | 209 | { |
394a4c21 BZ |
210 | struct ide_floppy_obj *floppy = drive->driver_data; |
211 | struct request *rq = &floppy->request_sense_rq; | |
2e8a6f89 | 212 | struct ide_atapi_pc *pc = &floppy->request_sense_pc; |
1da177e4 | 213 | |
64a57fe4 | 214 | (void)ide_read_error(drive); |
0127854d | 215 | ide_floppy_create_request_sense_cmd(pc); |
7645c151 | 216 | ide_queue_pc_head(drive, floppy->disk, pc, rq); |
1da177e4 LT |
217 | } |
218 | ||
0eea6458 | 219 | /* The usual interrupt handler called during a packet command. */ |
52d3ccf7 | 220 | static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) |
1da177e4 | 221 | { |
844b9468 | 222 | return ide_pc_intr(drive, idefloppy_pc_intr, idefloppy_update_buffers, |
b14c7212 | 223 | idefloppy_retry_pc, ide_io_buffers); |
1da177e4 LT |
224 | } |
225 | ||
1da177e4 | 226 | /* |
0571c7a4 BP |
227 | * What we have here is a classic case of a top half / bottom half interrupt |
228 | * service routine. In interrupt mode, the device sends an interrupt to signal | |
229 | * that it is ready to receive a packet. However, we need to delay about 2-3 | |
230 | * ticks before issuing the packet or we gets in trouble. | |
1da177e4 | 231 | */ |
cbbc4e81 | 232 | static int idefloppy_transfer_pc(ide_drive_t *drive) |
1da177e4 | 233 | { |
1da177e4 | 234 | /* Send the actual packet */ |
2b9efba4 | 235 | drive->hwif->tp_ops->output_data(drive, NULL, drive->pc->c, 12); |
9567b349 | 236 | |
1da177e4 | 237 | /* Timeout for the packet command */ |
d6e2955a | 238 | return WAIT_FLOPPY_CMD; |
1da177e4 LT |
239 | } |
240 | ||
cbbc4e81 BP |
241 | /* |
242 | * Called as an interrupt (or directly). When the device says it's ready for a | |
243 | * packet, we schedule the packet transfer to occur about 2-3 ticks later in | |
244 | * transfer_pc. | |
245 | */ | |
246 | static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive) | |
1da177e4 LT |
247 | { |
248 | idefloppy_floppy_t *floppy = drive->driver_data; | |
0b2eea4c BZ |
249 | ide_expiry_t *expiry; |
250 | unsigned int timeout; | |
1da177e4 | 251 | |
0571c7a4 | 252 | /* |
1da177e4 LT |
253 | * The following delay solves a problem with ATAPI Zip 100 drives |
254 | * where the Busy flag was apparently being deasserted before the | |
255 | * unit was ready to receive data. This was happening on a | |
256 | * 1200 MHz Athlon system. 10/26/01 25msec is too short, | |
257 | * 40 and 50msec work well. idefloppy_pc_intr will not be actually | |
258 | * used until after the packet is moved in about 50 msec. | |
259 | */ | |
ea68d270 | 260 | if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) { |
0b2eea4c | 261 | timeout = floppy->ticks; |
cbbc4e81 | 262 | expiry = &idefloppy_transfer_pc; |
0b2eea4c | 263 | } else { |
d6e2955a | 264 | timeout = WAIT_FLOPPY_CMD; |
0b2eea4c BZ |
265 | expiry = NULL; |
266 | } | |
267 | ||
2b9efba4 | 268 | return ide_transfer_pc(drive, idefloppy_pc_intr, timeout, expiry); |
1da177e4 LT |
269 | } |
270 | ||
d652c138 | 271 | static void ide_floppy_report_error(idefloppy_floppy_t *floppy, |
8e555123 | 272 | struct ide_atapi_pc *pc) |
1da177e4 | 273 | { |
d652c138 | 274 | /* supress error messages resulting from Medium not present */ |
1da177e4 LT |
275 | if (floppy->sense_key == 0x02 && |
276 | floppy->asc == 0x3a && | |
277 | floppy->ascq == 0x00) | |
d652c138 BP |
278 | return; |
279 | ||
280 | printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x, key = %2x, " | |
281 | "asc = %2x, ascq = %2x\n", | |
282 | floppy->drive->name, pc->c[0], floppy->sense_key, | |
283 | floppy->asc, floppy->ascq); | |
284 | ||
1da177e4 LT |
285 | } |
286 | ||
0571c7a4 | 287 | static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, |
8e555123 | 288 | struct ide_atapi_pc *pc) |
1da177e4 LT |
289 | { |
290 | idefloppy_floppy_t *floppy = drive->driver_data; | |
1da177e4 | 291 | |
1da177e4 | 292 | if (floppy->failed_pc == NULL && |
30d67099 | 293 | pc->c[0] != GPCMD_REQUEST_SENSE) |
1da177e4 | 294 | floppy->failed_pc = pc; |
2b9efba4 | 295 | |
1da177e4 | 296 | /* Set the current packet command */ |
2b9efba4 | 297 | drive->pc = pc; |
1da177e4 | 298 | |
757ced89 | 299 | if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) { |
6e5fa7b8 | 300 | if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR)) |
757ced89 BP |
301 | ide_floppy_report_error(floppy, pc); |
302 | /* Giving up */ | |
303 | pc->error = IDEFLOPPY_ERROR_GENERAL; | |
304 | ||
1da177e4 | 305 | floppy->failed_pc = NULL; |
b14c7212 | 306 | drive->pc_callback(drive, 0); |
1da177e4 LT |
307 | return ide_stopped; |
308 | } | |
309 | ||
bcc77d9c | 310 | debug_log("Retry number - %d\n", pc->retries); |
1da177e4 LT |
311 | |
312 | pc->retries++; | |
1da177e4 | 313 | |
2b9efba4 | 314 | return ide_issue_pc(drive, idefloppy_start_pc_transfer, |
d6e2955a | 315 | WAIT_FLOPPY_CMD, NULL); |
1da177e4 LT |
316 | } |
317 | ||
0127854d | 318 | void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc) |
1da177e4 | 319 | { |
7bf7420a | 320 | ide_init_pc(pc); |
30d67099 | 321 | pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES; |
1da177e4 LT |
322 | pc->c[7] = 255; |
323 | pc->c[8] = 255; | |
8e555123 | 324 | pc->req_xfer = 255; |
1da177e4 LT |
325 | } |
326 | ||
0571c7a4 | 327 | /* A mode sense command is used to "sense" floppy parameters. */ |
0127854d | 328 | void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code) |
1da177e4 | 329 | { |
24a5d703 | 330 | u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */ |
0571c7a4 | 331 | |
7bf7420a | 332 | ide_init_pc(pc); |
30d67099 | 333 | pc->c[0] = GPCMD_MODE_SENSE_10; |
1da177e4 | 334 | pc->c[1] = 0; |
4de4b9e1 | 335 | pc->c[2] = page_code; |
1da177e4 LT |
336 | |
337 | switch (page_code) { | |
0571c7a4 BP |
338 | case IDEFLOPPY_CAPABILITIES_PAGE: |
339 | length += 12; | |
340 | break; | |
341 | case IDEFLOPPY_FLEXIBLE_DISK_PAGE: | |
342 | length += 32; | |
343 | break; | |
344 | default: | |
345 | printk(KERN_ERR "ide-floppy: unsupported page code " | |
1da177e4 LT |
346 | "in create_mode_sense_cmd\n"); |
347 | } | |
8f622430 | 348 | put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]); |
8e555123 | 349 | pc->req_xfer = length; |
1da177e4 LT |
350 | } |
351 | ||
ae7e8ddc | 352 | static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, |
8e555123 | 353 | struct ide_atapi_pc *pc, struct request *rq, |
ae7e8ddc | 354 | unsigned long sector) |
1da177e4 LT |
355 | { |
356 | int block = sector / floppy->bs_factor; | |
357 | int blocks = rq->nr_sectors / floppy->bs_factor; | |
358 | int cmd = rq_data_dir(rq); | |
359 | ||
ae7e8ddc | 360 | debug_log("create_rw10_cmd: block == %d, blocks == %d\n", |
1da177e4 LT |
361 | block, blocks); |
362 | ||
7bf7420a | 363 | ide_init_pc(pc); |
ae7e8ddc BP |
364 | pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10; |
365 | put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]); | |
8f622430 | 366 | put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]); |
ae7e8ddc | 367 | |
20cd93be BP |
368 | memcpy(rq->cmd, pc->c, 12); |
369 | ||
1da177e4 | 370 | pc->rq = rq; |
b98b3409 | 371 | pc->b_count = 0; |
4aff5e23 | 372 | if (rq->cmd_flags & REQ_RW) |
6e5fa7b8 | 373 | pc->flags |= PC_FLAG_WRITING; |
8e555123 BP |
374 | pc->buf = NULL; |
375 | pc->req_xfer = pc->buf_size = blocks * floppy->block_size; | |
5e331095 | 376 | pc->flags |= PC_FLAG_DMA_OK; |
1da177e4 LT |
377 | } |
378 | ||
0571c7a4 | 379 | static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, |
8e555123 | 380 | struct ide_atapi_pc *pc, struct request *rq) |
1da177e4 | 381 | { |
7bf7420a | 382 | ide_init_pc(pc); |
1da177e4 | 383 | memcpy(pc->c, rq->cmd, sizeof(pc->c)); |
3d6392cf | 384 | pc->rq = rq; |
b98b3409 | 385 | pc->b_count = 0; |
3d6392cf | 386 | if (rq->data_len && rq_data_dir(rq) == WRITE) |
6e5fa7b8 | 387 | pc->flags |= PC_FLAG_WRITING; |
8e555123 | 388 | pc->buf = rq->data; |
3d6392cf | 389 | if (rq->bio) |
5e331095 | 390 | pc->flags |= PC_FLAG_DMA_OK; |
3d6392cf JA |
391 | /* |
392 | * possibly problematic, doesn't look like ide-floppy correctly | |
393 | * handled scattered requests if dma fails... | |
394 | */ | |
8e555123 | 395 | pc->req_xfer = pc->buf_size = rq->data_len; |
1da177e4 LT |
396 | } |
397 | ||
0571c7a4 BP |
398 | static ide_startstop_t idefloppy_do_request(ide_drive_t *drive, |
399 | struct request *rq, sector_t block_s) | |
1da177e4 LT |
400 | { |
401 | idefloppy_floppy_t *floppy = drive->driver_data; | |
b98b3409 | 402 | ide_hwif_t *hwif = drive->hwif; |
8e555123 | 403 | struct ide_atapi_pc *pc; |
1da177e4 LT |
404 | unsigned long block = (unsigned long)block_s; |
405 | ||
b98b3409 BP |
406 | debug_log("%s: dev: %s, cmd: 0x%x, cmd_type: %x, errors: %d\n", |
407 | __func__, rq->rq_disk ? rq->rq_disk->disk_name : "?", | |
408 | rq->cmd[0], rq->cmd_type, rq->errors); | |
409 | ||
410 | debug_log("%s: sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n", | |
411 | __func__, (long)rq->sector, rq->nr_sectors, | |
412 | rq->current_nr_sectors); | |
1da177e4 LT |
413 | |
414 | if (rq->errors >= ERROR_MAX) { | |
d652c138 BP |
415 | if (floppy->failed_pc) |
416 | ide_floppy_report_error(floppy, floppy->failed_pc); | |
1da177e4 LT |
417 | else |
418 | printk(KERN_ERR "ide-floppy: %s: I/O error\n", | |
419 | drive->name); | |
c2b2b293 | 420 | idefloppy_end_request(drive, 0, 0); |
1da177e4 LT |
421 | return ide_stopped; |
422 | } | |
4aff5e23 | 423 | if (blk_fs_request(rq)) { |
1da177e4 LT |
424 | if (((long)rq->sector % floppy->bs_factor) || |
425 | (rq->nr_sectors % floppy->bs_factor)) { | |
0571c7a4 BP |
426 | printk(KERN_ERR "%s: unsupported r/w request size\n", |
427 | drive->name); | |
c2b2b293 | 428 | idefloppy_end_request(drive, 0, 0); |
1da177e4 LT |
429 | return ide_stopped; |
430 | } | |
2e8a6f89 | 431 | pc = &floppy->queued_pc; |
1da177e4 | 432 | idefloppy_create_rw_cmd(floppy, pc, rq, block); |
4aff5e23 | 433 | } else if (blk_special_request(rq)) { |
8e555123 | 434 | pc = (struct ide_atapi_pc *) rq->buffer; |
4aff5e23 | 435 | } else if (blk_pc_request(rq)) { |
2e8a6f89 | 436 | pc = &floppy->queued_pc; |
3d6392cf | 437 | idefloppy_blockpc_cmd(floppy, pc, rq); |
1da177e4 LT |
438 | } else { |
439 | blk_dump_rq_flags(rq, | |
440 | "ide-floppy: unsupported command in queue"); | |
c2b2b293 | 441 | idefloppy_end_request(drive, 0, 0); |
1da177e4 LT |
442 | return ide_stopped; |
443 | } | |
444 | ||
b98b3409 BP |
445 | ide_init_sg_cmd(drive, rq); |
446 | ide_map_sg(drive, rq); | |
447 | ||
448 | pc->sg = hwif->sg_table; | |
449 | pc->sg_cnt = hwif->sg_nents; | |
450 | ||
1da177e4 | 451 | pc->rq = rq; |
5d41893c | 452 | |
1da177e4 LT |
453 | return idefloppy_issue_pc(drive, pc); |
454 | } | |
455 | ||
1da177e4 | 456 | /* |
8e81bbba BP |
457 | * Look at the flexible disk page parameters. We ignore the CHS capacity |
458 | * parameters and use the LBA parameters instead. | |
1da177e4 | 459 | */ |
8e81bbba | 460 | static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive) |
1da177e4 LT |
461 | { |
462 | idefloppy_floppy_t *floppy = drive->driver_data; | |
2ac07d92 | 463 | struct gendisk *disk = floppy->disk; |
8e555123 | 464 | struct ide_atapi_pc pc; |
8e81bbba | 465 | u8 *page; |
1da177e4 | 466 | int capacity, lba_capacity; |
8e81bbba BP |
467 | u16 transfer_rate, sector_size, cyls, rpm; |
468 | u8 heads, sectors; | |
1da177e4 | 469 | |
0127854d | 470 | ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE); |
8e81bbba | 471 | |
2ac07d92 | 472 | if (ide_queue_pc_tail(drive, disk, &pc)) { |
8e81bbba BP |
473 | printk(KERN_ERR "ide-floppy: Can't get flexible disk page" |
474 | " parameters\n"); | |
1da177e4 LT |
475 | return 1; |
476 | } | |
49cac39e BZ |
477 | |
478 | if (pc.buf[3] & 0x80) | |
479 | drive->atapi_flags |= IDE_AFLAG_WP; | |
480 | else | |
481 | drive->atapi_flags &= ~IDE_AFLAG_WP; | |
482 | ||
483 | set_disk_ro(disk, !!(drive->atapi_flags & IDE_AFLAG_WP)); | |
484 | ||
8e555123 | 485 | page = &pc.buf[8]; |
8e81bbba | 486 | |
85ae98a3 HH |
487 | transfer_rate = be16_to_cpup((__be16 *)&pc.buf[8 + 2]); |
488 | sector_size = be16_to_cpup((__be16 *)&pc.buf[8 + 6]); | |
489 | cyls = be16_to_cpup((__be16 *)&pc.buf[8 + 8]); | |
490 | rpm = be16_to_cpup((__be16 *)&pc.buf[8 + 28]); | |
8e555123 BP |
491 | heads = pc.buf[8 + 4]; |
492 | sectors = pc.buf[8 + 5]; | |
8e81bbba BP |
493 | |
494 | capacity = cyls * heads * sectors * sector_size; | |
495 | ||
496 | if (memcmp(page, &floppy->flexible_disk_page, 32)) | |
1da177e4 LT |
497 | printk(KERN_INFO "%s: %dkB, %d/%d/%d CHS, %d kBps, " |
498 | "%d sector size, %d rpm\n", | |
8e81bbba BP |
499 | drive->name, capacity / 1024, cyls, heads, |
500 | sectors, transfer_rate / 8, sector_size, rpm); | |
501 | ||
502 | memcpy(&floppy->flexible_disk_page, page, 32); | |
503 | drive->bios_cyl = cyls; | |
504 | drive->bios_head = heads; | |
505 | drive->bios_sect = sectors; | |
1da177e4 | 506 | lba_capacity = floppy->blocks * floppy->block_size; |
8e81bbba | 507 | |
1da177e4 LT |
508 | if (capacity < lba_capacity) { |
509 | printk(KERN_NOTICE "%s: The disk reports a capacity of %d " | |
510 | "bytes, but the drive only handles %d\n", | |
511 | drive->name, lba_capacity, capacity); | |
8e81bbba BP |
512 | floppy->blocks = floppy->block_size ? |
513 | capacity / floppy->block_size : 0; | |
1da177e4 LT |
514 | } |
515 | return 0; | |
516 | } | |
517 | ||
1da177e4 | 518 | /* |
194ec0c0 BP |
519 | * Determine if a media is present in the floppy drive, and if so, its LBA |
520 | * capacity. | |
1da177e4 | 521 | */ |
194ec0c0 | 522 | static int ide_floppy_get_capacity(ide_drive_t *drive) |
1da177e4 LT |
523 | { |
524 | idefloppy_floppy_t *floppy = drive->driver_data; | |
2ac07d92 | 525 | struct gendisk *disk = floppy->disk; |
8e555123 | 526 | struct ide_atapi_pc pc; |
194ec0c0 BP |
527 | u8 *cap_desc; |
528 | u8 header_len, desc_cnt; | |
529 | int i, rc = 1, blocks, length; | |
530 | ||
1da177e4 LT |
531 | drive->bios_cyl = 0; |
532 | drive->bios_head = drive->bios_sect = 0; | |
fdb77da4 AC |
533 | floppy->blocks = 0; |
534 | floppy->bs_factor = 1; | |
1da177e4 LT |
535 | set_capacity(floppy->disk, 0); |
536 | ||
0127854d | 537 | ide_floppy_create_read_capacity_cmd(&pc); |
2ac07d92 | 538 | if (ide_queue_pc_tail(drive, disk, &pc)) { |
1da177e4 LT |
539 | printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); |
540 | return 1; | |
541 | } | |
8e555123 BP |
542 | header_len = pc.buf[3]; |
543 | cap_desc = &pc.buf[4]; | |
194ec0c0 BP |
544 | desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */ |
545 | ||
546 | for (i = 0; i < desc_cnt; i++) { | |
547 | unsigned int desc_start = 4 + i*8; | |
548 | ||
85ae98a3 HH |
549 | blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]); |
550 | length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]); | |
194ec0c0 BP |
551 | |
552 | debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n", | |
553 | i, blocks * length / 1024, blocks, length); | |
1da177e4 | 554 | |
194ec0c0 BP |
555 | if (i) |
556 | continue; | |
557 | /* | |
558 | * the code below is valid only for the 1st descriptor, ie i=0 | |
559 | */ | |
1da177e4 | 560 | |
8e555123 | 561 | switch (pc.buf[desc_start + 4] & 0x03) { |
1da177e4 LT |
562 | /* Clik! drive returns this instead of CAPACITY_CURRENT */ |
563 | case CAPACITY_UNFORMATTED: | |
ea68d270 | 564 | if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) |
0571c7a4 | 565 | /* |
1da177e4 LT |
566 | * If it is not a clik drive, break out |
567 | * (maintains previous driver behaviour) | |
568 | */ | |
569 | break; | |
570 | case CAPACITY_CURRENT: | |
571 | /* Normal Zip/LS-120 disks */ | |
194ec0c0 | 572 | if (memcmp(cap_desc, &floppy->cap_desc, 8)) |
1da177e4 LT |
573 | printk(KERN_INFO "%s: %dkB, %d blocks, %d " |
574 | "sector size\n", drive->name, | |
575 | blocks * length / 1024, blocks, length); | |
194ec0c0 BP |
576 | memcpy(&floppy->cap_desc, cap_desc, 8); |
577 | ||
1da177e4 LT |
578 | if (!length || length % 512) { |
579 | printk(KERN_NOTICE "%s: %d bytes block size " | |
580 | "not supported\n", drive->name, length); | |
581 | } else { | |
194ec0c0 BP |
582 | floppy->blocks = blocks; |
583 | floppy->block_size = length; | |
584 | floppy->bs_factor = length / 512; | |
585 | if (floppy->bs_factor != 1) | |
586 | printk(KERN_NOTICE "%s: warning: non " | |
1da177e4 LT |
587 | "512 bytes block size not " |
588 | "fully supported\n", | |
589 | drive->name); | |
194ec0c0 | 590 | rc = 0; |
1da177e4 LT |
591 | } |
592 | break; | |
593 | case CAPACITY_NO_CARTRIDGE: | |
594 | /* | |
595 | * This is a KERN_ERR so it appears on screen | |
596 | * for the user to see | |
597 | */ | |
598 | printk(KERN_ERR "%s: No disk in drive\n", drive->name); | |
599 | break; | |
600 | case CAPACITY_INVALID: | |
601 | printk(KERN_ERR "%s: Invalid capacity for disk " | |
602 | "in drive\n", drive->name); | |
603 | break; | |
604 | } | |
194ec0c0 | 605 | debug_log("Descriptor 0 Code: %d\n", |
8e555123 | 606 | pc.buf[desc_start + 4] & 0x03); |
1da177e4 LT |
607 | } |
608 | ||
609 | /* Clik! disk does not support get_flexible_disk_page */ | |
ea68d270 | 610 | if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) |
8e81bbba | 611 | (void) ide_floppy_get_flexible_disk_page(drive); |
1da177e4 | 612 | |
2ac07d92 BZ |
613 | set_capacity(disk, floppy->blocks * floppy->bs_factor); |
614 | ||
1da177e4 LT |
615 | return rc; |
616 | } | |
617 | ||
0571c7a4 | 618 | static sector_t idefloppy_capacity(ide_drive_t *drive) |
1da177e4 LT |
619 | { |
620 | idefloppy_floppy_t *floppy = drive->driver_data; | |
621 | unsigned long capacity = floppy->blocks * floppy->bs_factor; | |
622 | ||
623 | return capacity; | |
624 | } | |
625 | ||
7662d046 | 626 | #ifdef CONFIG_IDE_PROC_FS |
92f1f8fd EO |
627 | ide_devset_rw_field(bios_cyl, bios_cyl); |
628 | ide_devset_rw_field(bios_head, bios_head); | |
629 | ide_devset_rw_field(bios_sect, bios_sect); | |
8185d5aa BZ |
630 | |
631 | static int get_ticks(ide_drive_t *drive) | |
1da177e4 LT |
632 | { |
633 | idefloppy_floppy_t *floppy = drive->driver_data; | |
8185d5aa BZ |
634 | return floppy->ticks; |
635 | } | |
1da177e4 | 636 | |
8185d5aa BZ |
637 | static int set_ticks(ide_drive_t *drive, int arg) |
638 | { | |
639 | idefloppy_floppy_t *floppy = drive->driver_data; | |
640 | floppy->ticks = arg; | |
641 | return 0; | |
1da177e4 | 642 | } |
8185d5aa | 643 | |
92f1f8fd | 644 | IDE_DEVSET(ticks, DS_SYNC, get_ticks, set_ticks); |
8185d5aa | 645 | |
92f1f8fd EO |
646 | static const struct ide_proc_devset idefloppy_settings[] = { |
647 | IDE_PROC_DEVSET(bios_cyl, 0, 1023), | |
648 | IDE_PROC_DEVSET(bios_head, 0, 255), | |
649 | IDE_PROC_DEVSET(bios_sect, 0, 63), | |
650 | IDE_PROC_DEVSET(ticks, 0, 255), | |
651 | { 0 }, | |
8185d5aa | 652 | }; |
7662d046 | 653 | #endif |
1da177e4 | 654 | |
0571c7a4 | 655 | static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy) |
1da177e4 | 656 | { |
4dde4492 | 657 | u16 *id = drive->id; |
3ad6776c | 658 | u8 gcw[2]; |
1da177e4 | 659 | |
4dde4492 | 660 | *((u16 *)&gcw) = id[ATA_ID_CONFIG]; |
2e8a6f89 | 661 | |
2207fa5a | 662 | drive->pc_callback = ide_floppy_callback; |
3ad6776c BP |
663 | |
664 | if (((gcw[0] & 0x60) >> 5) == 1) | |
ea68d270 | 665 | drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT; |
1da177e4 | 666 | /* |
0571c7a4 BP |
667 | * We used to check revisions here. At this point however I'm giving up. |
668 | * Just assume they are all broken, its easier. | |
1da177e4 | 669 | * |
0571c7a4 BP |
670 | * The actual reason for the workarounds was likely a driver bug after |
671 | * all rather than a firmware bug, and the workaround below used to hide | |
672 | * it. It should be fixed as of version 1.9, but to be on the safe side | |
673 | * we'll leave the limitation below for the 2.2.x tree. | |
1da177e4 | 674 | */ |
4dde4492 | 675 | if (!strncmp((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI", 20)) { |
ea68d270 | 676 | drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE; |
1da177e4 LT |
677 | /* This value will be visible in the /proc/ide/hdx/settings */ |
678 | floppy->ticks = IDEFLOPPY_TICKS_DELAY; | |
679 | blk_queue_max_sectors(drive->queue, 64); | |
680 | } | |
681 | ||
682 | /* | |
0571c7a4 BP |
683 | * Guess what? The IOMEGA Clik! drive also needs the above fix. It makes |
684 | * nasty clicking noises without it, so please don't remove this. | |
685 | */ | |
4dde4492 | 686 | if (strncmp((char *)&id[ATA_ID_PROD], "IOMEGA Clik!", 11) == 0) { |
1da177e4 | 687 | blk_queue_max_sectors(drive->queue, 64); |
ea68d270 | 688 | drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE; |
0578042d BZ |
689 | /* IOMEGA Clik! drives do not support lock/unlock commands */ |
690 | drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK; | |
1da177e4 LT |
691 | } |
692 | ||
194ec0c0 | 693 | (void) ide_floppy_get_capacity(drive); |
1e874f44 BZ |
694 | |
695 | ide_proc_register_driver(drive, floppy->driver); | |
1da177e4 LT |
696 | } |
697 | ||
4031bbe4 | 698 | static void ide_floppy_remove(ide_drive_t *drive) |
1da177e4 LT |
699 | { |
700 | idefloppy_floppy_t *floppy = drive->driver_data; | |
701 | struct gendisk *g = floppy->disk; | |
702 | ||
7662d046 | 703 | ide_proc_unregister_driver(drive, floppy->driver); |
1da177e4 LT |
704 | |
705 | del_gendisk(g); | |
706 | ||
707 | ide_floppy_put(floppy); | |
1da177e4 LT |
708 | } |
709 | ||
9a24b63d | 710 | static void idefloppy_cleanup_obj(struct kref *kref) |
1da177e4 LT |
711 | { |
712 | struct ide_floppy_obj *floppy = to_ide_floppy(kref); | |
713 | ide_drive_t *drive = floppy->drive; | |
714 | struct gendisk *g = floppy->disk; | |
715 | ||
716 | drive->driver_data = NULL; | |
717 | g->private_data = NULL; | |
718 | put_disk(g); | |
719 | kfree(floppy); | |
720 | } | |
721 | ||
ecfd80e4 | 722 | #ifdef CONFIG_IDE_PROC_FS |
0571c7a4 BP |
723 | static int proc_idefloppy_read_capacity(char *page, char **start, off_t off, |
724 | int count, int *eof, void *data) | |
1da177e4 LT |
725 | { |
726 | ide_drive_t*drive = (ide_drive_t *)data; | |
727 | int len; | |
728 | ||
0571c7a4 BP |
729 | len = sprintf(page, "%llu\n", (long long)idefloppy_capacity(drive)); |
730 | PROC_IDE_READ_RETURN(page, start, off, count, eof, len); | |
1da177e4 LT |
731 | } |
732 | ||
733 | static ide_proc_entry_t idefloppy_proc[] = { | |
0571c7a4 BP |
734 | { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL }, |
735 | { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, | |
1da177e4 LT |
736 | { NULL, 0, NULL, NULL } |
737 | }; | |
ecfd80e4 | 738 | #endif /* CONFIG_IDE_PROC_FS */ |
1da177e4 | 739 | |
4031bbe4 | 740 | static int ide_floppy_probe(ide_drive_t *); |
1da177e4 | 741 | |
1da177e4 | 742 | static ide_driver_t idefloppy_driver = { |
8604affd | 743 | .gen_driver = { |
4ef3b8f4 | 744 | .owner = THIS_MODULE, |
8604affd BZ |
745 | .name = "ide-floppy", |
746 | .bus = &ide_bus_type, | |
8604affd | 747 | }, |
4031bbe4 RK |
748 | .probe = ide_floppy_probe, |
749 | .remove = ide_floppy_remove, | |
1da177e4 LT |
750 | .version = IDEFLOPPY_VERSION, |
751 | .media = ide_floppy, | |
1da177e4 | 752 | .do_request = idefloppy_do_request, |
c2b2b293 | 753 | .end_request = idefloppy_end_request, |
1da177e4 | 754 | .error = __ide_error, |
7662d046 | 755 | #ifdef CONFIG_IDE_PROC_FS |
1da177e4 | 756 | .proc = idefloppy_proc, |
8185d5aa | 757 | .settings = idefloppy_settings, |
7662d046 | 758 | #endif |
1da177e4 LT |
759 | }; |
760 | ||
761 | static int idefloppy_open(struct inode *inode, struct file *filp) | |
762 | { | |
763 | struct gendisk *disk = inode->i_bdev->bd_disk; | |
764 | struct ide_floppy_obj *floppy; | |
765 | ide_drive_t *drive; | |
1da177e4 LT |
766 | int ret = 0; |
767 | ||
bcc77d9c | 768 | debug_log("Reached %s\n", __func__); |
1da177e4 | 769 | |
0571c7a4 BP |
770 | floppy = ide_floppy_get(disk); |
771 | if (!floppy) | |
1da177e4 LT |
772 | return -ENXIO; |
773 | ||
774 | drive = floppy->drive; | |
775 | ||
c94964a4 | 776 | floppy->openers++; |
1da177e4 | 777 | |
c94964a4 | 778 | if (floppy->openers == 1) { |
ea68d270 | 779 | drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS; |
1da177e4 LT |
780 | /* Just in case */ |
781 | ||
de699ad5 | 782 | if (ide_do_test_unit_ready(drive, disk)) |
0c8a6c7a | 783 | ide_do_start_stop(drive, disk, 1); |
1da177e4 | 784 | |
194ec0c0 | 785 | if (ide_floppy_get_capacity(drive) |
1da177e4 LT |
786 | && (filp->f_flags & O_NDELAY) == 0 |
787 | /* | |
0571c7a4 BP |
788 | * Allow O_NDELAY to open a drive without a disk, or with an |
789 | * unreadable disk, so that we can get the format capacity | |
790 | * of the drive or begin the format - Sam | |
791 | */ | |
1da177e4 | 792 | ) { |
1da177e4 LT |
793 | ret = -EIO; |
794 | goto out_put_floppy; | |
795 | } | |
796 | ||
49cac39e | 797 | if ((drive->atapi_flags & IDE_AFLAG_WP) && (filp->f_mode & 2)) { |
1da177e4 LT |
798 | ret = -EROFS; |
799 | goto out_put_floppy; | |
800 | } | |
e996fc8a | 801 | |
ea68d270 | 802 | drive->atapi_flags |= IDE_AFLAG_MEDIA_CHANGED; |
0578042d | 803 | ide_set_media_lock(drive, disk, 1); |
1da177e4 | 804 | check_disk_change(inode->i_bdev); |
ea68d270 | 805 | } else if (drive->atapi_flags & IDE_AFLAG_FORMAT_IN_PROGRESS) { |
1da177e4 LT |
806 | ret = -EBUSY; |
807 | goto out_put_floppy; | |
808 | } | |
809 | return 0; | |
810 | ||
811 | out_put_floppy: | |
c94964a4 | 812 | floppy->openers--; |
1da177e4 LT |
813 | ide_floppy_put(floppy); |
814 | return ret; | |
815 | } | |
816 | ||
817 | static int idefloppy_release(struct inode *inode, struct file *filp) | |
818 | { | |
819 | struct gendisk *disk = inode->i_bdev->bd_disk; | |
820 | struct ide_floppy_obj *floppy = ide_floppy_g(disk); | |
821 | ide_drive_t *drive = floppy->drive; | |
bcc77d9c BP |
822 | |
823 | debug_log("Reached %s\n", __func__); | |
1da177e4 | 824 | |
c94964a4 | 825 | if (floppy->openers == 1) { |
0578042d | 826 | ide_set_media_lock(drive, disk, 0); |
ea68d270 | 827 | drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS; |
1da177e4 | 828 | } |
c94964a4 BZ |
829 | |
830 | floppy->openers--; | |
1da177e4 LT |
831 | |
832 | ide_floppy_put(floppy); | |
833 | ||
834 | return 0; | |
835 | } | |
836 | ||
a885c8c4 CH |
837 | static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo) |
838 | { | |
839 | struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk); | |
840 | ide_drive_t *drive = floppy->drive; | |
841 | ||
842 | geo->heads = drive->bios_head; | |
843 | geo->sectors = drive->bios_sect; | |
844 | geo->cylinders = (u16)drive->bios_cyl; /* truncate */ | |
845 | return 0; | |
846 | } | |
847 | ||
ea68d270 BP |
848 | static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc, |
849 | unsigned long arg, unsigned int cmd) | |
20bf7bda | 850 | { |
ea68d270 | 851 | idefloppy_floppy_t *floppy = drive->driver_data; |
0578042d | 852 | struct gendisk *disk = floppy->disk; |
e996fc8a | 853 | int prevent = (arg && cmd != CDROMEJECT) ? 1 : 0; |
ea68d270 | 854 | |
20bf7bda BP |
855 | if (floppy->openers > 1) |
856 | return -EBUSY; | |
857 | ||
0578042d | 858 | ide_set_media_lock(drive, disk, prevent); |
20bf7bda | 859 | |
0c8a6c7a BZ |
860 | if (cmd == CDROMEJECT) |
861 | ide_do_start_stop(drive, disk, 2); | |
20bf7bda BP |
862 | |
863 | return 0; | |
864 | } | |
865 | ||
1da177e4 LT |
866 | static int idefloppy_ioctl(struct inode *inode, struct file *file, |
867 | unsigned int cmd, unsigned long arg) | |
868 | { | |
869 | struct block_device *bdev = inode->i_bdev; | |
870 | struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk); | |
871 | ide_drive_t *drive = floppy->drive; | |
8e555123 | 872 | struct ide_atapi_pc pc; |
1da177e4 | 873 | void __user *argp = (void __user *)arg; |
07203f64 | 874 | int err; |
1da177e4 | 875 | |
d56c99e2 | 876 | if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR) |
ea68d270 | 877 | return ide_floppy_lockdoor(drive, &pc, arg, cmd); |
1da177e4 | 878 | |
d56c99e2 BZ |
879 | err = ide_floppy_format_ioctl(drive, file, cmd, argp); |
880 | if (err != -ENOTTY) | |
881 | return err; | |
89636af2 BZ |
882 | |
883 | /* | |
884 | * skip SCSI_IOCTL_SEND_COMMAND (deprecated) | |
885 | * and CDROM_SEND_PACKET (legacy) ioctls | |
886 | */ | |
887 | if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND) | |
888 | err = scsi_cmd_ioctl(file, bdev->bd_disk->queue, | |
889 | bdev->bd_disk, cmd, argp); | |
89636af2 BZ |
890 | |
891 | if (err == -ENOTTY) | |
892 | err = generic_ide_ioctl(drive, file, bdev, cmd, arg); | |
893 | ||
894 | return err; | |
1da177e4 LT |
895 | } |
896 | ||
897 | static int idefloppy_media_changed(struct gendisk *disk) | |
898 | { | |
899 | struct ide_floppy_obj *floppy = ide_floppy_g(disk); | |
900 | ide_drive_t *drive = floppy->drive; | |
6e5fa7b8 | 901 | int ret; |
1da177e4 LT |
902 | |
903 | /* do not scan partitions twice if this is a removable device */ | |
904 | if (drive->attach) { | |
905 | drive->attach = 0; | |
906 | return 0; | |
907 | } | |
ea68d270 BP |
908 | ret = !!(drive->atapi_flags & IDE_AFLAG_MEDIA_CHANGED); |
909 | drive->atapi_flags &= ~IDE_AFLAG_MEDIA_CHANGED; | |
6e5fa7b8 | 910 | return ret; |
1da177e4 LT |
911 | } |
912 | ||
913 | static int idefloppy_revalidate_disk(struct gendisk *disk) | |
914 | { | |
915 | struct ide_floppy_obj *floppy = ide_floppy_g(disk); | |
916 | set_capacity(disk, idefloppy_capacity(floppy->drive)); | |
917 | return 0; | |
918 | } | |
919 | ||
920 | static struct block_device_operations idefloppy_ops = { | |
52d3ccf7 PC |
921 | .owner = THIS_MODULE, |
922 | .open = idefloppy_open, | |
923 | .release = idefloppy_release, | |
924 | .ioctl = idefloppy_ioctl, | |
925 | .getgeo = idefloppy_getgeo, | |
926 | .media_changed = idefloppy_media_changed, | |
927 | .revalidate_disk = idefloppy_revalidate_disk | |
1da177e4 LT |
928 | }; |
929 | ||
4031bbe4 | 930 | static int ide_floppy_probe(ide_drive_t *drive) |
1da177e4 LT |
931 | { |
932 | idefloppy_floppy_t *floppy; | |
933 | struct gendisk *g; | |
934 | ||
935 | if (!strstr("ide-floppy", drive->driver_req)) | |
936 | goto failed; | |
2a924662 | 937 | |
1da177e4 LT |
938 | if (drive->media != ide_floppy) |
939 | goto failed; | |
2a924662 | 940 | |
51509eec | 941 | if (!ide_check_atapi_device(drive, DRV_NAME)) { |
0571c7a4 BP |
942 | printk(KERN_ERR "ide-floppy: %s: not supported by this version" |
943 | " of ide-floppy\n", drive->name); | |
1da177e4 LT |
944 | goto failed; |
945 | } | |
0571c7a4 BP |
946 | floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL); |
947 | if (!floppy) { | |
948 | printk(KERN_ERR "ide-floppy: %s: Can't allocate a floppy" | |
949 | " structure\n", drive->name); | |
1da177e4 LT |
950 | goto failed; |
951 | } | |
952 | ||
953 | g = alloc_disk(1 << PARTN_BITS); | |
954 | if (!g) | |
955 | goto out_free_floppy; | |
956 | ||
957 | ide_init_disk(g, drive); | |
958 | ||
1da177e4 LT |
959 | kref_init(&floppy->kref); |
960 | ||
961 | floppy->drive = drive; | |
962 | floppy->driver = &idefloppy_driver; | |
963 | floppy->disk = g; | |
964 | ||
965 | g->private_data = &floppy->driver; | |
966 | ||
967 | drive->driver_data = floppy; | |
968 | ||
0571c7a4 | 969 | idefloppy_setup(drive, floppy); |
8604affd | 970 | |
1da177e4 LT |
971 | g->minors = 1 << PARTN_BITS; |
972 | g->driverfs_dev = &drive->gendev; | |
1da177e4 LT |
973 | g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0; |
974 | g->fops = &idefloppy_ops; | |
975 | drive->attach = 1; | |
976 | add_disk(g); | |
977 | return 0; | |
978 | ||
1da177e4 LT |
979 | out_free_floppy: |
980 | kfree(floppy); | |
981 | failed: | |
8604affd | 982 | return -ENODEV; |
1da177e4 LT |
983 | } |
984 | ||
0571c7a4 | 985 | static void __exit idefloppy_exit(void) |
1da177e4 | 986 | { |
8604affd | 987 | driver_unregister(&idefloppy_driver.gen_driver); |
1da177e4 LT |
988 | } |
989 | ||
17514e8a | 990 | static int __init idefloppy_init(void) |
1da177e4 LT |
991 | { |
992 | printk("ide-floppy driver " IDEFLOPPY_VERSION "\n"); | |
8604affd | 993 | return driver_register(&idefloppy_driver.gen_driver); |
1da177e4 LT |
994 | } |
995 | ||
263756ec | 996 | MODULE_ALIAS("ide:*m-floppy*"); |
0127854d | 997 | MODULE_ALIAS("ide-floppy"); |
1da177e4 LT |
998 | module_init(idefloppy_init); |
999 | module_exit(idefloppy_exit); | |
1000 | MODULE_LICENSE("GPL"); | |
0571c7a4 BP |
1001 | MODULE_DESCRIPTION("ATAPI FLOPPY Driver"); |
1002 |