Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/drivers/ide/ide-iops.c Version 0.37 Mar 05, 2003 | |
3 | * | |
4 | * Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org> | |
5 | * Copyright (C) 2003 Red Hat <alan@redhat.com> | |
6 | * | |
7 | */ | |
8 | ||
9 | #include <linux/config.h> | |
10 | #include <linux/module.h> | |
11 | #include <linux/types.h> | |
12 | #include <linux/string.h> | |
13 | #include <linux/kernel.h> | |
14 | #include <linux/timer.h> | |
15 | #include <linux/mm.h> | |
16 | #include <linux/interrupt.h> | |
17 | #include <linux/major.h> | |
18 | #include <linux/errno.h> | |
19 | #include <linux/genhd.h> | |
20 | #include <linux/blkpg.h> | |
21 | #include <linux/slab.h> | |
22 | #include <linux/pci.h> | |
23 | #include <linux/delay.h> | |
24 | #include <linux/hdreg.h> | |
25 | #include <linux/ide.h> | |
26 | #include <linux/bitops.h> | |
27 | ||
28 | #include <asm/byteorder.h> | |
29 | #include <asm/irq.h> | |
30 | #include <asm/uaccess.h> | |
31 | #include <asm/io.h> | |
32 | ||
33 | /* | |
34 | * Conventional PIO operations for ATA devices | |
35 | */ | |
36 | ||
37 | static u8 ide_inb (unsigned long port) | |
38 | { | |
39 | return (u8) inb(port); | |
40 | } | |
41 | ||
42 | static u16 ide_inw (unsigned long port) | |
43 | { | |
44 | return (u16) inw(port); | |
45 | } | |
46 | ||
47 | static void ide_insw (unsigned long port, void *addr, u32 count) | |
48 | { | |
49 | insw(port, addr, count); | |
50 | } | |
51 | ||
52 | static u32 ide_inl (unsigned long port) | |
53 | { | |
54 | return (u32) inl(port); | |
55 | } | |
56 | ||
57 | static void ide_insl (unsigned long port, void *addr, u32 count) | |
58 | { | |
59 | insl(port, addr, count); | |
60 | } | |
61 | ||
62 | static void ide_outb (u8 val, unsigned long port) | |
63 | { | |
64 | outb(val, port); | |
65 | } | |
66 | ||
67 | static void ide_outbsync (ide_drive_t *drive, u8 addr, unsigned long port) | |
68 | { | |
69 | outb(addr, port); | |
70 | } | |
71 | ||
72 | static void ide_outw (u16 val, unsigned long port) | |
73 | { | |
74 | outw(val, port); | |
75 | } | |
76 | ||
77 | static void ide_outsw (unsigned long port, void *addr, u32 count) | |
78 | { | |
79 | outsw(port, addr, count); | |
80 | } | |
81 | ||
82 | static void ide_outl (u32 val, unsigned long port) | |
83 | { | |
84 | outl(val, port); | |
85 | } | |
86 | ||
87 | static void ide_outsl (unsigned long port, void *addr, u32 count) | |
88 | { | |
89 | outsl(port, addr, count); | |
90 | } | |
91 | ||
92 | void default_hwif_iops (ide_hwif_t *hwif) | |
93 | { | |
94 | hwif->OUTB = ide_outb; | |
95 | hwif->OUTBSYNC = ide_outbsync; | |
96 | hwif->OUTW = ide_outw; | |
97 | hwif->OUTL = ide_outl; | |
98 | hwif->OUTSW = ide_outsw; | |
99 | hwif->OUTSL = ide_outsl; | |
100 | hwif->INB = ide_inb; | |
101 | hwif->INW = ide_inw; | |
102 | hwif->INL = ide_inl; | |
103 | hwif->INSW = ide_insw; | |
104 | hwif->INSL = ide_insl; | |
105 | } | |
106 | ||
107 | EXPORT_SYMBOL(default_hwif_iops); | |
108 | ||
109 | /* | |
110 | * MMIO operations, typically used for SATA controllers | |
111 | */ | |
112 | ||
113 | static u8 ide_mm_inb (unsigned long port) | |
114 | { | |
115 | return (u8) readb((void __iomem *) port); | |
116 | } | |
117 | ||
118 | static u16 ide_mm_inw (unsigned long port) | |
119 | { | |
120 | return (u16) readw((void __iomem *) port); | |
121 | } | |
122 | ||
123 | static void ide_mm_insw (unsigned long port, void *addr, u32 count) | |
124 | { | |
125 | __ide_mm_insw((void __iomem *) port, addr, count); | |
126 | } | |
127 | ||
128 | static u32 ide_mm_inl (unsigned long port) | |
129 | { | |
130 | return (u32) readl((void __iomem *) port); | |
131 | } | |
132 | ||
133 | static void ide_mm_insl (unsigned long port, void *addr, u32 count) | |
134 | { | |
135 | __ide_mm_insl((void __iomem *) port, addr, count); | |
136 | } | |
137 | ||
138 | static void ide_mm_outb (u8 value, unsigned long port) | |
139 | { | |
140 | writeb(value, (void __iomem *) port); | |
141 | } | |
142 | ||
143 | static void ide_mm_outbsync (ide_drive_t *drive, u8 value, unsigned long port) | |
144 | { | |
145 | writeb(value, (void __iomem *) port); | |
146 | } | |
147 | ||
148 | static void ide_mm_outw (u16 value, unsigned long port) | |
149 | { | |
150 | writew(value, (void __iomem *) port); | |
151 | } | |
152 | ||
153 | static void ide_mm_outsw (unsigned long port, void *addr, u32 count) | |
154 | { | |
155 | __ide_mm_outsw((void __iomem *) port, addr, count); | |
156 | } | |
157 | ||
158 | static void ide_mm_outl (u32 value, unsigned long port) | |
159 | { | |
160 | writel(value, (void __iomem *) port); | |
161 | } | |
162 | ||
163 | static void ide_mm_outsl (unsigned long port, void *addr, u32 count) | |
164 | { | |
165 | __ide_mm_outsl((void __iomem *) port, addr, count); | |
166 | } | |
167 | ||
168 | void default_hwif_mmiops (ide_hwif_t *hwif) | |
169 | { | |
170 | hwif->OUTB = ide_mm_outb; | |
171 | /* Most systems will need to override OUTBSYNC, alas however | |
172 | this one is controller specific! */ | |
173 | hwif->OUTBSYNC = ide_mm_outbsync; | |
174 | hwif->OUTW = ide_mm_outw; | |
175 | hwif->OUTL = ide_mm_outl; | |
176 | hwif->OUTSW = ide_mm_outsw; | |
177 | hwif->OUTSL = ide_mm_outsl; | |
178 | hwif->INB = ide_mm_inb; | |
179 | hwif->INW = ide_mm_inw; | |
180 | hwif->INL = ide_mm_inl; | |
181 | hwif->INSW = ide_mm_insw; | |
182 | hwif->INSL = ide_mm_insl; | |
183 | } | |
184 | ||
185 | EXPORT_SYMBOL(default_hwif_mmiops); | |
186 | ||
187 | u32 ide_read_24 (ide_drive_t *drive) | |
188 | { | |
189 | u8 hcyl = HWIF(drive)->INB(IDE_HCYL_REG); | |
190 | u8 lcyl = HWIF(drive)->INB(IDE_LCYL_REG); | |
191 | u8 sect = HWIF(drive)->INB(IDE_SECTOR_REG); | |
192 | return (hcyl<<16)|(lcyl<<8)|sect; | |
193 | } | |
194 | ||
195 | void SELECT_DRIVE (ide_drive_t *drive) | |
196 | { | |
197 | if (HWIF(drive)->selectproc) | |
198 | HWIF(drive)->selectproc(drive); | |
199 | HWIF(drive)->OUTB(drive->select.all, IDE_SELECT_REG); | |
200 | } | |
201 | ||
202 | EXPORT_SYMBOL(SELECT_DRIVE); | |
203 | ||
204 | void SELECT_INTERRUPT (ide_drive_t *drive) | |
205 | { | |
206 | if (HWIF(drive)->intrproc) | |
207 | HWIF(drive)->intrproc(drive); | |
208 | else | |
209 | HWIF(drive)->OUTB(drive->ctl|2, IDE_CONTROL_REG); | |
210 | } | |
211 | ||
212 | void SELECT_MASK (ide_drive_t *drive, int mask) | |
213 | { | |
214 | if (HWIF(drive)->maskproc) | |
215 | HWIF(drive)->maskproc(drive, mask); | |
216 | } | |
217 | ||
218 | void QUIRK_LIST (ide_drive_t *drive) | |
219 | { | |
220 | if (HWIF(drive)->quirkproc) | |
221 | drive->quirk_list = HWIF(drive)->quirkproc(drive); | |
222 | } | |
223 | ||
224 | /* | |
225 | * Some localbus EIDE interfaces require a special access sequence | |
226 | * when using 32-bit I/O instructions to transfer data. We call this | |
227 | * the "vlb_sync" sequence, which consists of three successive reads | |
228 | * of the sector count register location, with interrupts disabled | |
229 | * to ensure that the reads all happen together. | |
230 | */ | |
231 | static void ata_vlb_sync(ide_drive_t *drive, unsigned long port) | |
232 | { | |
233 | (void) HWIF(drive)->INB(port); | |
234 | (void) HWIF(drive)->INB(port); | |
235 | (void) HWIF(drive)->INB(port); | |
236 | } | |
237 | ||
238 | /* | |
239 | * This is used for most PIO data transfers *from* the IDE interface | |
240 | */ | |
241 | static void ata_input_data(ide_drive_t *drive, void *buffer, u32 wcount) | |
242 | { | |
243 | ide_hwif_t *hwif = HWIF(drive); | |
244 | u8 io_32bit = drive->io_32bit; | |
245 | ||
246 | if (io_32bit) { | |
247 | if (io_32bit & 2) { | |
248 | unsigned long flags; | |
249 | local_irq_save(flags); | |
250 | ata_vlb_sync(drive, IDE_NSECTOR_REG); | |
251 | hwif->INSL(IDE_DATA_REG, buffer, wcount); | |
252 | local_irq_restore(flags); | |
253 | } else | |
254 | hwif->INSL(IDE_DATA_REG, buffer, wcount); | |
255 | } else { | |
256 | hwif->INSW(IDE_DATA_REG, buffer, wcount<<1); | |
257 | } | |
258 | } | |
259 | ||
260 | /* | |
261 | * This is used for most PIO data transfers *to* the IDE interface | |
262 | */ | |
263 | static void ata_output_data(ide_drive_t *drive, void *buffer, u32 wcount) | |
264 | { | |
265 | ide_hwif_t *hwif = HWIF(drive); | |
266 | u8 io_32bit = drive->io_32bit; | |
267 | ||
268 | if (io_32bit) { | |
269 | if (io_32bit & 2) { | |
270 | unsigned long flags; | |
271 | local_irq_save(flags); | |
272 | ata_vlb_sync(drive, IDE_NSECTOR_REG); | |
273 | hwif->OUTSL(IDE_DATA_REG, buffer, wcount); | |
274 | local_irq_restore(flags); | |
275 | } else | |
276 | hwif->OUTSL(IDE_DATA_REG, buffer, wcount); | |
277 | } else { | |
278 | hwif->OUTSW(IDE_DATA_REG, buffer, wcount<<1); | |
279 | } | |
280 | } | |
281 | ||
282 | /* | |
283 | * The following routines are mainly used by the ATAPI drivers. | |
284 | * | |
285 | * These routines will round up any request for an odd number of bytes, | |
286 | * so if an odd bytecount is specified, be sure that there's at least one | |
287 | * extra byte allocated for the buffer. | |
288 | */ | |
289 | ||
290 | static void atapi_input_bytes(ide_drive_t *drive, void *buffer, u32 bytecount) | |
291 | { | |
292 | ide_hwif_t *hwif = HWIF(drive); | |
293 | ||
294 | ++bytecount; | |
295 | #if defined(CONFIG_ATARI) || defined(CONFIG_Q40) | |
296 | if (MACH_IS_ATARI || MACH_IS_Q40) { | |
297 | /* Atari has a byte-swapped IDE interface */ | |
298 | insw_swapw(IDE_DATA_REG, buffer, bytecount / 2); | |
299 | return; | |
300 | } | |
301 | #endif /* CONFIG_ATARI || CONFIG_Q40 */ | |
302 | hwif->ata_input_data(drive, buffer, bytecount / 4); | |
303 | if ((bytecount & 0x03) >= 2) | |
304 | hwif->INSW(IDE_DATA_REG, ((u8 *)buffer)+(bytecount & ~0x03), 1); | |
305 | } | |
306 | ||
307 | static void atapi_output_bytes(ide_drive_t *drive, void *buffer, u32 bytecount) | |
308 | { | |
309 | ide_hwif_t *hwif = HWIF(drive); | |
310 | ||
311 | ++bytecount; | |
312 | #if defined(CONFIG_ATARI) || defined(CONFIG_Q40) | |
313 | if (MACH_IS_ATARI || MACH_IS_Q40) { | |
314 | /* Atari has a byte-swapped IDE interface */ | |
315 | outsw_swapw(IDE_DATA_REG, buffer, bytecount / 2); | |
316 | return; | |
317 | } | |
318 | #endif /* CONFIG_ATARI || CONFIG_Q40 */ | |
319 | hwif->ata_output_data(drive, buffer, bytecount / 4); | |
320 | if ((bytecount & 0x03) >= 2) | |
321 | hwif->OUTSW(IDE_DATA_REG, ((u8*)buffer)+(bytecount & ~0x03), 1); | |
322 | } | |
323 | ||
324 | void default_hwif_transport(ide_hwif_t *hwif) | |
325 | { | |
326 | hwif->ata_input_data = ata_input_data; | |
327 | hwif->ata_output_data = ata_output_data; | |
328 | hwif->atapi_input_bytes = atapi_input_bytes; | |
329 | hwif->atapi_output_bytes = atapi_output_bytes; | |
330 | } | |
331 | ||
332 | EXPORT_SYMBOL(default_hwif_transport); | |
333 | ||
334 | /* | |
335 | * Beginning of Taskfile OPCODE Library and feature sets. | |
336 | */ | |
337 | void ide_fix_driveid (struct hd_driveid *id) | |
338 | { | |
339 | #ifndef __LITTLE_ENDIAN | |
340 | # ifdef __BIG_ENDIAN | |
341 | int i; | |
342 | u16 *stringcast; | |
343 | ||
344 | id->config = __le16_to_cpu(id->config); | |
345 | id->cyls = __le16_to_cpu(id->cyls); | |
346 | id->reserved2 = __le16_to_cpu(id->reserved2); | |
347 | id->heads = __le16_to_cpu(id->heads); | |
348 | id->track_bytes = __le16_to_cpu(id->track_bytes); | |
349 | id->sector_bytes = __le16_to_cpu(id->sector_bytes); | |
350 | id->sectors = __le16_to_cpu(id->sectors); | |
351 | id->vendor0 = __le16_to_cpu(id->vendor0); | |
352 | id->vendor1 = __le16_to_cpu(id->vendor1); | |
353 | id->vendor2 = __le16_to_cpu(id->vendor2); | |
354 | stringcast = (u16 *)&id->serial_no[0]; | |
355 | for (i = 0; i < (20/2); i++) | |
356 | stringcast[i] = __le16_to_cpu(stringcast[i]); | |
357 | id->buf_type = __le16_to_cpu(id->buf_type); | |
358 | id->buf_size = __le16_to_cpu(id->buf_size); | |
359 | id->ecc_bytes = __le16_to_cpu(id->ecc_bytes); | |
360 | stringcast = (u16 *)&id->fw_rev[0]; | |
361 | for (i = 0; i < (8/2); i++) | |
362 | stringcast[i] = __le16_to_cpu(stringcast[i]); | |
363 | stringcast = (u16 *)&id->model[0]; | |
364 | for (i = 0; i < (40/2); i++) | |
365 | stringcast[i] = __le16_to_cpu(stringcast[i]); | |
366 | id->dword_io = __le16_to_cpu(id->dword_io); | |
367 | id->reserved50 = __le16_to_cpu(id->reserved50); | |
368 | id->field_valid = __le16_to_cpu(id->field_valid); | |
369 | id->cur_cyls = __le16_to_cpu(id->cur_cyls); | |
370 | id->cur_heads = __le16_to_cpu(id->cur_heads); | |
371 | id->cur_sectors = __le16_to_cpu(id->cur_sectors); | |
372 | id->cur_capacity0 = __le16_to_cpu(id->cur_capacity0); | |
373 | id->cur_capacity1 = __le16_to_cpu(id->cur_capacity1); | |
374 | id->lba_capacity = __le32_to_cpu(id->lba_capacity); | |
375 | id->dma_1word = __le16_to_cpu(id->dma_1word); | |
376 | id->dma_mword = __le16_to_cpu(id->dma_mword); | |
377 | id->eide_pio_modes = __le16_to_cpu(id->eide_pio_modes); | |
378 | id->eide_dma_min = __le16_to_cpu(id->eide_dma_min); | |
379 | id->eide_dma_time = __le16_to_cpu(id->eide_dma_time); | |
380 | id->eide_pio = __le16_to_cpu(id->eide_pio); | |
381 | id->eide_pio_iordy = __le16_to_cpu(id->eide_pio_iordy); | |
382 | for (i = 0; i < 2; ++i) | |
383 | id->words69_70[i] = __le16_to_cpu(id->words69_70[i]); | |
384 | for (i = 0; i < 4; ++i) | |
385 | id->words71_74[i] = __le16_to_cpu(id->words71_74[i]); | |
386 | id->queue_depth = __le16_to_cpu(id->queue_depth); | |
387 | for (i = 0; i < 4; ++i) | |
388 | id->words76_79[i] = __le16_to_cpu(id->words76_79[i]); | |
389 | id->major_rev_num = __le16_to_cpu(id->major_rev_num); | |
390 | id->minor_rev_num = __le16_to_cpu(id->minor_rev_num); | |
391 | id->command_set_1 = __le16_to_cpu(id->command_set_1); | |
392 | id->command_set_2 = __le16_to_cpu(id->command_set_2); | |
393 | id->cfsse = __le16_to_cpu(id->cfsse); | |
394 | id->cfs_enable_1 = __le16_to_cpu(id->cfs_enable_1); | |
395 | id->cfs_enable_2 = __le16_to_cpu(id->cfs_enable_2); | |
396 | id->csf_default = __le16_to_cpu(id->csf_default); | |
397 | id->dma_ultra = __le16_to_cpu(id->dma_ultra); | |
398 | id->trseuc = __le16_to_cpu(id->trseuc); | |
399 | id->trsEuc = __le16_to_cpu(id->trsEuc); | |
400 | id->CurAPMvalues = __le16_to_cpu(id->CurAPMvalues); | |
401 | id->mprc = __le16_to_cpu(id->mprc); | |
402 | id->hw_config = __le16_to_cpu(id->hw_config); | |
403 | id->acoustic = __le16_to_cpu(id->acoustic); | |
404 | id->msrqs = __le16_to_cpu(id->msrqs); | |
405 | id->sxfert = __le16_to_cpu(id->sxfert); | |
406 | id->sal = __le16_to_cpu(id->sal); | |
407 | id->spg = __le32_to_cpu(id->spg); | |
408 | id->lba_capacity_2 = __le64_to_cpu(id->lba_capacity_2); | |
409 | for (i = 0; i < 22; i++) | |
410 | id->words104_125[i] = __le16_to_cpu(id->words104_125[i]); | |
411 | id->last_lun = __le16_to_cpu(id->last_lun); | |
412 | id->word127 = __le16_to_cpu(id->word127); | |
413 | id->dlf = __le16_to_cpu(id->dlf); | |
414 | id->csfo = __le16_to_cpu(id->csfo); | |
415 | for (i = 0; i < 26; i++) | |
416 | id->words130_155[i] = __le16_to_cpu(id->words130_155[i]); | |
417 | id->word156 = __le16_to_cpu(id->word156); | |
418 | for (i = 0; i < 3; i++) | |
419 | id->words157_159[i] = __le16_to_cpu(id->words157_159[i]); | |
420 | id->cfa_power = __le16_to_cpu(id->cfa_power); | |
421 | for (i = 0; i < 14; i++) | |
422 | id->words161_175[i] = __le16_to_cpu(id->words161_175[i]); | |
423 | for (i = 0; i < 31; i++) | |
424 | id->words176_205[i] = __le16_to_cpu(id->words176_205[i]); | |
425 | for (i = 0; i < 48; i++) | |
426 | id->words206_254[i] = __le16_to_cpu(id->words206_254[i]); | |
427 | id->integrity_word = __le16_to_cpu(id->integrity_word); | |
428 | # else | |
429 | # error "Please fix <asm/byteorder.h>" | |
430 | # endif | |
431 | #endif | |
432 | } | |
433 | ||
434 | /* FIXME: exported for use by the USB storage (isd200.c) code only */ | |
435 | EXPORT_SYMBOL(ide_fix_driveid); | |
436 | ||
437 | void ide_fixstring (u8 *s, const int bytecount, const int byteswap) | |
438 | { | |
439 | u8 *p = s, *end = &s[bytecount & ~1]; /* bytecount must be even */ | |
440 | ||
441 | if (byteswap) { | |
442 | /* convert from big-endian to host byte order */ | |
443 | for (p = end ; p != s;) { | |
444 | unsigned short *pp = (unsigned short *) (p -= 2); | |
445 | *pp = ntohs(*pp); | |
446 | } | |
447 | } | |
448 | /* strip leading blanks */ | |
449 | while (s != end && *s == ' ') | |
450 | ++s; | |
451 | /* compress internal blanks and strip trailing blanks */ | |
452 | while (s != end && *s) { | |
453 | if (*s++ != ' ' || (s != end && *s && *s != ' ')) | |
454 | *p++ = *(s-1); | |
455 | } | |
456 | /* wipe out trailing garbage */ | |
457 | while (p != end) | |
458 | *p++ = '\0'; | |
459 | } | |
460 | ||
461 | EXPORT_SYMBOL(ide_fixstring); | |
462 | ||
463 | /* | |
464 | * Needed for PCI irq sharing | |
465 | */ | |
466 | int drive_is_ready (ide_drive_t *drive) | |
467 | { | |
468 | ide_hwif_t *hwif = HWIF(drive); | |
469 | u8 stat = 0; | |
470 | ||
471 | if (drive->waiting_for_dma) | |
472 | return hwif->ide_dma_test_irq(drive); | |
473 | ||
474 | #if 0 | |
475 | /* need to guarantee 400ns since last command was issued */ | |
476 | udelay(1); | |
477 | #endif | |
478 | ||
479 | #ifdef CONFIG_IDEPCI_SHARE_IRQ | |
480 | /* | |
481 | * We do a passive status test under shared PCI interrupts on | |
482 | * cards that truly share the ATA side interrupt, but may also share | |
483 | * an interrupt with another pci card/device. We make no assumptions | |
484 | * about possible isa-pnp and pci-pnp issues yet. | |
485 | */ | |
486 | if (IDE_CONTROL_REG) | |
487 | stat = hwif->INB(IDE_ALTSTATUS_REG); | |
488 | else | |
489 | #endif /* CONFIG_IDEPCI_SHARE_IRQ */ | |
490 | /* Note: this may clear a pending IRQ!! */ | |
491 | stat = hwif->INB(IDE_STATUS_REG); | |
492 | ||
493 | if (stat & BUSY_STAT) | |
494 | /* drive busy: definitely not interrupting */ | |
495 | return 0; | |
496 | ||
497 | /* drive ready: *might* be interrupting */ | |
498 | return 1; | |
499 | } | |
500 | ||
501 | EXPORT_SYMBOL(drive_is_ready); | |
502 | ||
503 | /* | |
504 | * Global for All, and taken from ide-pmac.c. Can be called | |
505 | * with spinlock held & IRQs disabled, so don't schedule ! | |
506 | */ | |
507 | int wait_for_ready (ide_drive_t *drive, int timeout) | |
508 | { | |
509 | ide_hwif_t *hwif = HWIF(drive); | |
510 | u8 stat = 0; | |
511 | ||
512 | while(--timeout) { | |
513 | stat = hwif->INB(IDE_STATUS_REG); | |
514 | if (!(stat & BUSY_STAT)) { | |
515 | if (drive->ready_stat == 0) | |
516 | break; | |
517 | else if ((stat & drive->ready_stat)||(stat & ERR_STAT)) | |
518 | break; | |
519 | } | |
520 | mdelay(1); | |
521 | } | |
522 | if ((stat & ERR_STAT) || timeout <= 0) { | |
523 | if (stat & ERR_STAT) { | |
524 | printk(KERN_ERR "%s: wait_for_ready, " | |
525 | "error status: %x\n", drive->name, stat); | |
526 | } | |
527 | return 1; | |
528 | } | |
529 | return 0; | |
530 | } | |
531 | ||
532 | EXPORT_SYMBOL(wait_for_ready); | |
533 | ||
534 | /* | |
535 | * This routine busy-waits for the drive status to be not "busy". | |
536 | * It then checks the status for all of the "good" bits and none | |
537 | * of the "bad" bits, and if all is okay it returns 0. All other | |
538 | * cases return 1 after invoking ide_error() -- caller should just return. | |
539 | * | |
540 | * This routine should get fixed to not hog the cpu during extra long waits.. | |
541 | * That could be done by busy-waiting for the first jiffy or two, and then | |
542 | * setting a timer to wake up at half second intervals thereafter, | |
543 | * until timeout is achieved, before timing out. | |
544 | */ | |
545 | int ide_wait_stat (ide_startstop_t *startstop, ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout) | |
546 | { | |
547 | ide_hwif_t *hwif = HWIF(drive); | |
548 | u8 stat; | |
549 | int i; | |
550 | unsigned long flags; | |
551 | ||
552 | /* bail early if we've exceeded max_failures */ | |
553 | if (drive->max_failures && (drive->failures > drive->max_failures)) { | |
554 | *startstop = ide_stopped; | |
555 | return 1; | |
556 | } | |
557 | ||
558 | udelay(1); /* spec allows drive 400ns to assert "BUSY" */ | |
559 | if ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) { | |
560 | local_irq_set(flags); | |
561 | timeout += jiffies; | |
562 | while ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) { | |
563 | if (time_after(jiffies, timeout)) { | |
564 | /* | |
565 | * One last read after the timeout in case | |
566 | * heavy interrupt load made us not make any | |
567 | * progress during the timeout.. | |
568 | */ | |
569 | stat = hwif->INB(IDE_STATUS_REG); | |
570 | if (!(stat & BUSY_STAT)) | |
571 | break; | |
572 | ||
573 | local_irq_restore(flags); | |
574 | *startstop = ide_error(drive, "status timeout", stat); | |
575 | return 1; | |
576 | } | |
577 | } | |
578 | local_irq_restore(flags); | |
579 | } | |
580 | /* | |
581 | * Allow status to settle, then read it again. | |
582 | * A few rare drives vastly violate the 400ns spec here, | |
583 | * so we'll wait up to 10usec for a "good" status | |
584 | * rather than expensively fail things immediately. | |
585 | * This fix courtesy of Matthew Faupel & Niccolo Rigacci. | |
586 | */ | |
587 | for (i = 0; i < 10; i++) { | |
588 | udelay(1); | |
589 | if (OK_STAT((stat = hwif->INB(IDE_STATUS_REG)), good, bad)) | |
590 | return 0; | |
591 | } | |
592 | *startstop = ide_error(drive, "status error", stat); | |
593 | return 1; | |
594 | } | |
595 | ||
596 | EXPORT_SYMBOL(ide_wait_stat); | |
597 | ||
598 | /* | |
599 | * All hosts that use the 80c ribbon must use! | |
600 | * The name is derived from upper byte of word 93 and the 80c ribbon. | |
601 | */ | |
602 | u8 eighty_ninty_three (ide_drive_t *drive) | |
603 | { | |
604 | #if 0 | |
605 | if (!HWIF(drive)->udma_four) | |
606 | return 0; | |
607 | ||
608 | if (drive->id->major_rev_num) { | |
609 | int hssbd = 0; | |
610 | int i; | |
611 | /* | |
612 | * Determine highest Supported SPEC | |
613 | */ | |
614 | for (i=1; i<=15; i++) | |
615 | if (drive->id->major_rev_num & (1<<i)) | |
616 | hssbd++; | |
617 | ||
618 | switch (hssbd) { | |
619 | case 7: | |
620 | case 6: | |
621 | case 5: | |
622 | /* ATA-4 and older do not support above Ultra 33 */ | |
623 | default: | |
624 | return 0; | |
625 | } | |
626 | } | |
627 | ||
628 | return ((u8) ( | |
629 | #ifndef CONFIG_IDEDMA_IVB | |
630 | (drive->id->hw_config & 0x4000) && | |
631 | #endif /* CONFIG_IDEDMA_IVB */ | |
632 | (drive->id->hw_config & 0x6000)) ? 1 : 0); | |
633 | ||
634 | #else | |
635 | ||
636 | return ((u8) ((HWIF(drive)->udma_four) && | |
637 | #ifndef CONFIG_IDEDMA_IVB | |
638 | (drive->id->hw_config & 0x4000) && | |
639 | #endif /* CONFIG_IDEDMA_IVB */ | |
640 | (drive->id->hw_config & 0x6000)) ? 1 : 0); | |
641 | #endif | |
642 | } | |
643 | ||
644 | EXPORT_SYMBOL(eighty_ninty_three); | |
645 | ||
646 | int ide_ata66_check (ide_drive_t *drive, ide_task_t *args) | |
647 | { | |
648 | if ((args->tfRegister[IDE_COMMAND_OFFSET] == WIN_SETFEATURES) && | |
649 | (args->tfRegister[IDE_SECTOR_OFFSET] > XFER_UDMA_2) && | |
650 | (args->tfRegister[IDE_FEATURE_OFFSET] == SETFEATURES_XFER)) { | |
651 | #ifndef CONFIG_IDEDMA_IVB | |
652 | if ((drive->id->hw_config & 0x6000) == 0) { | |
653 | #else /* !CONFIG_IDEDMA_IVB */ | |
654 | if (((drive->id->hw_config & 0x2000) == 0) || | |
655 | ((drive->id->hw_config & 0x4000) == 0)) { | |
656 | #endif /* CONFIG_IDEDMA_IVB */ | |
657 | printk("%s: Speed warnings UDMA 3/4/5 is not " | |
658 | "functional.\n", drive->name); | |
659 | return 1; | |
660 | } | |
661 | if (!HWIF(drive)->udma_four) { | |
662 | printk("%s: Speed warnings UDMA 3/4/5 is not " | |
663 | "functional.\n", | |
664 | HWIF(drive)->name); | |
665 | return 1; | |
666 | } | |
667 | } | |
668 | return 0; | |
669 | } | |
670 | ||
671 | /* | |
672 | * Backside of HDIO_DRIVE_CMD call of SETFEATURES_XFER. | |
673 | * 1 : Safe to update drive->id DMA registers. | |
674 | * 0 : OOPs not allowed. | |
675 | */ | |
676 | int set_transfer (ide_drive_t *drive, ide_task_t *args) | |
677 | { | |
678 | if ((args->tfRegister[IDE_COMMAND_OFFSET] == WIN_SETFEATURES) && | |
679 | (args->tfRegister[IDE_SECTOR_OFFSET] >= XFER_SW_DMA_0) && | |
680 | (args->tfRegister[IDE_FEATURE_OFFSET] == SETFEATURES_XFER) && | |
681 | (drive->id->dma_ultra || | |
682 | drive->id->dma_mword || | |
683 | drive->id->dma_1word)) | |
684 | return 1; | |
685 | ||
686 | return 0; | |
687 | } | |
688 | ||
689 | #ifdef CONFIG_BLK_DEV_IDEDMA | |
690 | static u8 ide_auto_reduce_xfer (ide_drive_t *drive) | |
691 | { | |
692 | if (!drive->crc_count) | |
693 | return drive->current_speed; | |
694 | drive->crc_count = 0; | |
695 | ||
696 | switch(drive->current_speed) { | |
697 | case XFER_UDMA_7: return XFER_UDMA_6; | |
698 | case XFER_UDMA_6: return XFER_UDMA_5; | |
699 | case XFER_UDMA_5: return XFER_UDMA_4; | |
700 | case XFER_UDMA_4: return XFER_UDMA_3; | |
701 | case XFER_UDMA_3: return XFER_UDMA_2; | |
702 | case XFER_UDMA_2: return XFER_UDMA_1; | |
703 | case XFER_UDMA_1: return XFER_UDMA_0; | |
704 | /* | |
705 | * OOPS we do not goto non Ultra DMA modes | |
706 | * without iCRC's available we force | |
707 | * the system to PIO and make the user | |
708 | * invoke the ATA-1 ATA-2 DMA modes. | |
709 | */ | |
710 | case XFER_UDMA_0: | |
711 | default: return XFER_PIO_4; | |
712 | } | |
713 | } | |
714 | #endif /* CONFIG_BLK_DEV_IDEDMA */ | |
715 | ||
716 | /* | |
717 | * Update the | |
718 | */ | |
719 | int ide_driveid_update (ide_drive_t *drive) | |
720 | { | |
721 | ide_hwif_t *hwif = HWIF(drive); | |
722 | struct hd_driveid *id; | |
723 | #if 0 | |
724 | id = kmalloc(SECTOR_WORDS*4, GFP_ATOMIC); | |
725 | if (!id) | |
726 | return 0; | |
727 | ||
728 | taskfile_lib_get_identify(drive, (char *)&id); | |
729 | ||
730 | ide_fix_driveid(id); | |
731 | if (id) { | |
732 | drive->id->dma_ultra = id->dma_ultra; | |
733 | drive->id->dma_mword = id->dma_mword; | |
734 | drive->id->dma_1word = id->dma_1word; | |
735 | /* anything more ? */ | |
736 | kfree(id); | |
737 | } | |
738 | return 1; | |
739 | #else | |
740 | /* | |
741 | * Re-read drive->id for possible DMA mode | |
742 | * change (copied from ide-probe.c) | |
743 | */ | |
744 | unsigned long timeout, flags; | |
745 | ||
746 | SELECT_MASK(drive, 1); | |
747 | if (IDE_CONTROL_REG) | |
748 | hwif->OUTB(drive->ctl,IDE_CONTROL_REG); | |
749 | msleep(50); | |
750 | hwif->OUTB(WIN_IDENTIFY, IDE_COMMAND_REG); | |
751 | timeout = jiffies + WAIT_WORSTCASE; | |
752 | do { | |
753 | if (time_after(jiffies, timeout)) { | |
754 | SELECT_MASK(drive, 0); | |
755 | return 0; /* drive timed-out */ | |
756 | } | |
757 | msleep(50); /* give drive a breather */ | |
758 | } while (hwif->INB(IDE_ALTSTATUS_REG) & BUSY_STAT); | |
759 | msleep(50); /* wait for IRQ and DRQ_STAT */ | |
760 | if (!OK_STAT(hwif->INB(IDE_STATUS_REG),DRQ_STAT,BAD_R_STAT)) { | |
761 | SELECT_MASK(drive, 0); | |
762 | printk("%s: CHECK for good STATUS\n", drive->name); | |
763 | return 0; | |
764 | } | |
765 | local_irq_save(flags); | |
766 | SELECT_MASK(drive, 0); | |
767 | id = kmalloc(SECTOR_WORDS*4, GFP_ATOMIC); | |
768 | if (!id) { | |
769 | local_irq_restore(flags); | |
770 | return 0; | |
771 | } | |
772 | ata_input_data(drive, id, SECTOR_WORDS); | |
773 | (void) hwif->INB(IDE_STATUS_REG); /* clear drive IRQ */ | |
774 | local_irq_enable(); | |
775 | local_irq_restore(flags); | |
776 | ide_fix_driveid(id); | |
777 | if (id) { | |
778 | drive->id->dma_ultra = id->dma_ultra; | |
779 | drive->id->dma_mword = id->dma_mword; | |
780 | drive->id->dma_1word = id->dma_1word; | |
781 | /* anything more ? */ | |
782 | kfree(id); | |
783 | } | |
784 | ||
785 | return 1; | |
786 | #endif | |
787 | } | |
788 | ||
789 | /* | |
790 | * Similar to ide_wait_stat(), except it never calls ide_error internally. | |
791 | * This is a kludge to handle the new ide_config_drive_speed() function, | |
792 | * and should not otherwise be used anywhere. Eventually, the tuneproc's | |
793 | * should be updated to return ide_startstop_t, in which case we can get | |
794 | * rid of this abomination again. :) -ml | |
795 | * | |
796 | * It is gone.......... | |
797 | * | |
798 | * const char *msg == consider adding for verbose errors. | |
799 | */ | |
800 | int ide_config_drive_speed (ide_drive_t *drive, u8 speed) | |
801 | { | |
802 | ide_hwif_t *hwif = HWIF(drive); | |
803 | int i, error = 1; | |
804 | u8 stat; | |
805 | ||
806 | // while (HWGROUP(drive)->busy) | |
807 | // msleep(50); | |
808 | ||
809 | #ifdef CONFIG_BLK_DEV_IDEDMA | |
810 | if (hwif->ide_dma_check) /* check if host supports DMA */ | |
811 | hwif->ide_dma_host_off(drive); | |
812 | #endif | |
813 | ||
814 | /* | |
815 | * Don't use ide_wait_cmd here - it will | |
816 | * attempt to set_geometry and recalibrate, | |
817 | * but for some reason these don't work at | |
818 | * this point (lost interrupt). | |
819 | */ | |
820 | /* | |
821 | * Select the drive, and issue the SETFEATURES command | |
822 | */ | |
823 | disable_irq_nosync(hwif->irq); | |
824 | ||
825 | /* | |
826 | * FIXME: we race against the running IRQ here if | |
827 | * this is called from non IRQ context. If we use | |
828 | * disable_irq() we hang on the error path. Work | |
829 | * is needed. | |
830 | */ | |
831 | ||
832 | udelay(1); | |
833 | SELECT_DRIVE(drive); | |
834 | SELECT_MASK(drive, 0); | |
835 | udelay(1); | |
836 | if (IDE_CONTROL_REG) | |
837 | hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG); | |
838 | hwif->OUTB(speed, IDE_NSECTOR_REG); | |
839 | hwif->OUTB(SETFEATURES_XFER, IDE_FEATURE_REG); | |
840 | hwif->OUTB(WIN_SETFEATURES, IDE_COMMAND_REG); | |
841 | if ((IDE_CONTROL_REG) && (drive->quirk_list == 2)) | |
842 | hwif->OUTB(drive->ctl, IDE_CONTROL_REG); | |
843 | udelay(1); | |
844 | /* | |
845 | * Wait for drive to become non-BUSY | |
846 | */ | |
847 | if ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) { | |
848 | unsigned long flags, timeout; | |
849 | local_irq_set(flags); | |
850 | timeout = jiffies + WAIT_CMD; | |
851 | while ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) { | |
852 | if (time_after(jiffies, timeout)) | |
853 | break; | |
854 | } | |
855 | local_irq_restore(flags); | |
856 | } | |
857 | ||
858 | /* | |
859 | * Allow status to settle, then read it again. | |
860 | * A few rare drives vastly violate the 400ns spec here, | |
861 | * so we'll wait up to 10usec for a "good" status | |
862 | * rather than expensively fail things immediately. | |
863 | * This fix courtesy of Matthew Faupel & Niccolo Rigacci. | |
864 | */ | |
865 | for (i = 0; i < 10; i++) { | |
866 | udelay(1); | |
867 | if (OK_STAT((stat = hwif->INB(IDE_STATUS_REG)), DRIVE_READY, BUSY_STAT|DRQ_STAT|ERR_STAT)) { | |
868 | error = 0; | |
869 | break; | |
870 | } | |
871 | } | |
872 | ||
873 | SELECT_MASK(drive, 0); | |
874 | ||
875 | enable_irq(hwif->irq); | |
876 | ||
877 | if (error) { | |
878 | (void) ide_dump_status(drive, "set_drive_speed_status", stat); | |
879 | return error; | |
880 | } | |
881 | ||
882 | drive->id->dma_ultra &= ~0xFF00; | |
883 | drive->id->dma_mword &= ~0x0F00; | |
884 | drive->id->dma_1word &= ~0x0F00; | |
885 | ||
886 | #ifdef CONFIG_BLK_DEV_IDEDMA | |
887 | if (speed >= XFER_SW_DMA_0) | |
888 | hwif->ide_dma_host_on(drive); | |
889 | else if (hwif->ide_dma_check) /* check if host supports DMA */ | |
890 | hwif->ide_dma_off_quietly(drive); | |
891 | #endif | |
892 | ||
893 | switch(speed) { | |
894 | case XFER_UDMA_7: drive->id->dma_ultra |= 0x8080; break; | |
895 | case XFER_UDMA_6: drive->id->dma_ultra |= 0x4040; break; | |
896 | case XFER_UDMA_5: drive->id->dma_ultra |= 0x2020; break; | |
897 | case XFER_UDMA_4: drive->id->dma_ultra |= 0x1010; break; | |
898 | case XFER_UDMA_3: drive->id->dma_ultra |= 0x0808; break; | |
899 | case XFER_UDMA_2: drive->id->dma_ultra |= 0x0404; break; | |
900 | case XFER_UDMA_1: drive->id->dma_ultra |= 0x0202; break; | |
901 | case XFER_UDMA_0: drive->id->dma_ultra |= 0x0101; break; | |
902 | case XFER_MW_DMA_2: drive->id->dma_mword |= 0x0404; break; | |
903 | case XFER_MW_DMA_1: drive->id->dma_mword |= 0x0202; break; | |
904 | case XFER_MW_DMA_0: drive->id->dma_mword |= 0x0101; break; | |
905 | case XFER_SW_DMA_2: drive->id->dma_1word |= 0x0404; break; | |
906 | case XFER_SW_DMA_1: drive->id->dma_1word |= 0x0202; break; | |
907 | case XFER_SW_DMA_0: drive->id->dma_1word |= 0x0101; break; | |
908 | default: break; | |
909 | } | |
910 | if (!drive->init_speed) | |
911 | drive->init_speed = speed; | |
912 | drive->current_speed = speed; | |
913 | return error; | |
914 | } | |
915 | ||
916 | EXPORT_SYMBOL(ide_config_drive_speed); | |
917 | ||
918 | ||
919 | /* | |
920 | * This should get invoked any time we exit the driver to | |
921 | * wait for an interrupt response from a drive. handler() points | |
922 | * at the appropriate code to handle the next interrupt, and a | |
923 | * timer is started to prevent us from waiting forever in case | |
924 | * something goes wrong (see the ide_timer_expiry() handler later on). | |
925 | * | |
926 | * See also ide_execute_command | |
927 | */ | |
928 | static void __ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, | |
929 | unsigned int timeout, ide_expiry_t *expiry) | |
930 | { | |
931 | ide_hwgroup_t *hwgroup = HWGROUP(drive); | |
932 | ||
933 | if (hwgroup->handler != NULL) { | |
934 | printk(KERN_CRIT "%s: ide_set_handler: handler not null; " | |
935 | "old=%p, new=%p\n", | |
936 | drive->name, hwgroup->handler, handler); | |
937 | } | |
938 | hwgroup->handler = handler; | |
939 | hwgroup->expiry = expiry; | |
940 | hwgroup->timer.expires = jiffies + timeout; | |
941 | add_timer(&hwgroup->timer); | |
942 | } | |
943 | ||
944 | void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, | |
945 | unsigned int timeout, ide_expiry_t *expiry) | |
946 | { | |
947 | unsigned long flags; | |
948 | spin_lock_irqsave(&ide_lock, flags); | |
949 | __ide_set_handler(drive, handler, timeout, expiry); | |
950 | spin_unlock_irqrestore(&ide_lock, flags); | |
951 | } | |
952 | ||
953 | EXPORT_SYMBOL(ide_set_handler); | |
954 | ||
955 | /** | |
956 | * ide_execute_command - execute an IDE command | |
957 | * @drive: IDE drive to issue the command against | |
958 | * @command: command byte to write | |
959 | * @handler: handler for next phase | |
960 | * @timeout: timeout for command | |
961 | * @expiry: handler to run on timeout | |
962 | * | |
963 | * Helper function to issue an IDE command. This handles the | |
964 | * atomicity requirements, command timing and ensures that the | |
965 | * handler and IRQ setup do not race. All IDE command kick off | |
966 | * should go via this function or do equivalent locking. | |
967 | */ | |
968 | ||
969 | void ide_execute_command(ide_drive_t *drive, task_ioreg_t cmd, ide_handler_t *handler, unsigned timeout, ide_expiry_t *expiry) | |
970 | { | |
971 | unsigned long flags; | |
972 | ide_hwgroup_t *hwgroup = HWGROUP(drive); | |
973 | ide_hwif_t *hwif = HWIF(drive); | |
974 | ||
975 | spin_lock_irqsave(&ide_lock, flags); | |
976 | ||
977 | if(hwgroup->handler) | |
978 | BUG(); | |
979 | hwgroup->handler = handler; | |
980 | hwgroup->expiry = expiry; | |
981 | hwgroup->timer.expires = jiffies + timeout; | |
982 | add_timer(&hwgroup->timer); | |
983 | hwif->OUTBSYNC(drive, cmd, IDE_COMMAND_REG); | |
984 | /* Drive takes 400nS to respond, we must avoid the IRQ being | |
985 | serviced before that. | |
986 | ||
987 | FIXME: we could skip this delay with care on non shared | |
988 | devices | |
989 | */ | |
990 | ndelay(400); | |
991 | spin_unlock_irqrestore(&ide_lock, flags); | |
992 | } | |
993 | ||
994 | EXPORT_SYMBOL(ide_execute_command); | |
995 | ||
996 | ||
997 | /* needed below */ | |
998 | static ide_startstop_t do_reset1 (ide_drive_t *, int); | |
999 | ||
1000 | /* | |
1001 | * atapi_reset_pollfunc() gets invoked to poll the interface for completion every 50ms | |
1002 | * during an atapi drive reset operation. If the drive has not yet responded, | |
1003 | * and we have not yet hit our maximum waiting time, then the timer is restarted | |
1004 | * for another 50ms. | |
1005 | */ | |
1006 | static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive) | |
1007 | { | |
1008 | ide_hwgroup_t *hwgroup = HWGROUP(drive); | |
1009 | ide_hwif_t *hwif = HWIF(drive); | |
1010 | u8 stat; | |
1011 | ||
1012 | SELECT_DRIVE(drive); | |
1013 | udelay (10); | |
1014 | ||
1015 | if (OK_STAT(stat = hwif->INB(IDE_STATUS_REG), 0, BUSY_STAT)) { | |
1016 | printk("%s: ATAPI reset complete\n", drive->name); | |
1017 | } else { | |
1018 | if (time_before(jiffies, hwgroup->poll_timeout)) { | |
1019 | if (HWGROUP(drive)->handler != NULL) | |
1020 | BUG(); | |
1021 | ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, NULL); | |
1022 | /* continue polling */ | |
1023 | return ide_started; | |
1024 | } | |
1025 | /* end of polling */ | |
1026 | hwgroup->polling = 0; | |
1027 | printk("%s: ATAPI reset timed-out, status=0x%02x\n", | |
1028 | drive->name, stat); | |
1029 | /* do it the old fashioned way */ | |
1030 | return do_reset1(drive, 1); | |
1031 | } | |
1032 | /* done polling */ | |
1033 | hwgroup->polling = 0; | |
1034 | return ide_stopped; | |
1035 | } | |
1036 | ||
1037 | /* | |
1038 | * reset_pollfunc() gets invoked to poll the interface for completion every 50ms | |
1039 | * during an ide reset operation. If the drives have not yet responded, | |
1040 | * and we have not yet hit our maximum waiting time, then the timer is restarted | |
1041 | * for another 50ms. | |
1042 | */ | |
1043 | static ide_startstop_t reset_pollfunc (ide_drive_t *drive) | |
1044 | { | |
1045 | ide_hwgroup_t *hwgroup = HWGROUP(drive); | |
1046 | ide_hwif_t *hwif = HWIF(drive); | |
1047 | u8 tmp; | |
1048 | ||
1049 | if (hwif->reset_poll != NULL) { | |
1050 | if (hwif->reset_poll(drive)) { | |
1051 | printk(KERN_ERR "%s: host reset_poll failure for %s.\n", | |
1052 | hwif->name, drive->name); | |
1053 | return ide_stopped; | |
1054 | } | |
1055 | } | |
1056 | ||
1057 | if (!OK_STAT(tmp = hwif->INB(IDE_STATUS_REG), 0, BUSY_STAT)) { | |
1058 | if (time_before(jiffies, hwgroup->poll_timeout)) { | |
1059 | if (HWGROUP(drive)->handler != NULL) | |
1060 | BUG(); | |
1061 | ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL); | |
1062 | /* continue polling */ | |
1063 | return ide_started; | |
1064 | } | |
1065 | printk("%s: reset timed-out, status=0x%02x\n", hwif->name, tmp); | |
1066 | drive->failures++; | |
1067 | } else { | |
1068 | printk("%s: reset: ", hwif->name); | |
1069 | if ((tmp = hwif->INB(IDE_ERROR_REG)) == 1) { | |
1070 | printk("success\n"); | |
1071 | drive->failures = 0; | |
1072 | } else { | |
1073 | drive->failures++; | |
1074 | printk("master: "); | |
1075 | switch (tmp & 0x7f) { | |
1076 | case 1: printk("passed"); | |
1077 | break; | |
1078 | case 2: printk("formatter device error"); | |
1079 | break; | |
1080 | case 3: printk("sector buffer error"); | |
1081 | break; | |
1082 | case 4: printk("ECC circuitry error"); | |
1083 | break; | |
1084 | case 5: printk("controlling MPU error"); | |
1085 | break; | |
1086 | default:printk("error (0x%02x?)", tmp); | |
1087 | } | |
1088 | if (tmp & 0x80) | |
1089 | printk("; slave: failed"); | |
1090 | printk("\n"); | |
1091 | } | |
1092 | } | |
1093 | hwgroup->polling = 0; /* done polling */ | |
1094 | return ide_stopped; | |
1095 | } | |
1096 | ||
1097 | static void check_dma_crc(ide_drive_t *drive) | |
1098 | { | |
1099 | #ifdef CONFIG_BLK_DEV_IDEDMA | |
1100 | if (drive->crc_count) { | |
1101 | (void) HWIF(drive)->ide_dma_off_quietly(drive); | |
1102 | ide_set_xfer_rate(drive, ide_auto_reduce_xfer(drive)); | |
1103 | if (drive->current_speed >= XFER_SW_DMA_0) | |
1104 | (void) HWIF(drive)->ide_dma_on(drive); | |
1105 | } else | |
1106 | (void)__ide_dma_off(drive); | |
1107 | #endif | |
1108 | } | |
1109 | ||
1110 | static void ide_disk_pre_reset(ide_drive_t *drive) | |
1111 | { | |
1112 | int legacy = (drive->id->cfs_enable_2 & 0x0400) ? 0 : 1; | |
1113 | ||
1114 | drive->special.all = 0; | |
1115 | drive->special.b.set_geometry = legacy; | |
1116 | drive->special.b.recalibrate = legacy; | |
1117 | if (OK_TO_RESET_CONTROLLER) | |
1118 | drive->mult_count = 0; | |
1119 | if (!drive->keep_settings && !drive->using_dma) | |
1120 | drive->mult_req = 0; | |
1121 | if (drive->mult_req != drive->mult_count) | |
1122 | drive->special.b.set_multmode = 1; | |
1123 | } | |
1124 | ||
1125 | static void pre_reset(ide_drive_t *drive) | |
1126 | { | |
1127 | if (drive->media == ide_disk) | |
1128 | ide_disk_pre_reset(drive); | |
1129 | else | |
1130 | drive->post_reset = 1; | |
1131 | ||
1132 | if (!drive->keep_settings) { | |
1133 | if (drive->using_dma) { | |
1134 | check_dma_crc(drive); | |
1135 | } else { | |
1136 | drive->unmask = 0; | |
1137 | drive->io_32bit = 0; | |
1138 | } | |
1139 | return; | |
1140 | } | |
1141 | if (drive->using_dma) | |
1142 | check_dma_crc(drive); | |
1143 | ||
1144 | if (HWIF(drive)->pre_reset != NULL) | |
1145 | HWIF(drive)->pre_reset(drive); | |
1146 | ||
1147 | } | |
1148 | ||
1149 | /* | |
1150 | * do_reset1() attempts to recover a confused drive by resetting it. | |
1151 | * Unfortunately, resetting a disk drive actually resets all devices on | |
1152 | * the same interface, so it can really be thought of as resetting the | |
1153 | * interface rather than resetting the drive. | |
1154 | * | |
1155 | * ATAPI devices have their own reset mechanism which allows them to be | |
1156 | * individually reset without clobbering other devices on the same interface. | |
1157 | * | |
1158 | * Unfortunately, the IDE interface does not generate an interrupt to let | |
1159 | * us know when the reset operation has finished, so we must poll for this. | |
1160 | * Equally poor, though, is the fact that this may a very long time to complete, | |
1161 | * (up to 30 seconds worstcase). So, instead of busy-waiting here for it, | |
1162 | * we set a timer to poll at 50ms intervals. | |
1163 | */ | |
1164 | static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) | |
1165 | { | |
1166 | unsigned int unit; | |
1167 | unsigned long flags; | |
1168 | ide_hwif_t *hwif; | |
1169 | ide_hwgroup_t *hwgroup; | |
1170 | ||
1171 | spin_lock_irqsave(&ide_lock, flags); | |
1172 | hwif = HWIF(drive); | |
1173 | hwgroup = HWGROUP(drive); | |
1174 | ||
1175 | /* We must not reset with running handlers */ | |
1176 | if(hwgroup->handler != NULL) | |
1177 | BUG(); | |
1178 | ||
1179 | /* For an ATAPI device, first try an ATAPI SRST. */ | |
1180 | if (drive->media != ide_disk && !do_not_try_atapi) { | |
1181 | pre_reset(drive); | |
1182 | SELECT_DRIVE(drive); | |
1183 | udelay (20); | |
1184 | hwif->OUTB(WIN_SRST, IDE_COMMAND_REG); | |
1185 | hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE; | |
1186 | hwgroup->polling = 1; | |
1187 | __ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, NULL); | |
1188 | spin_unlock_irqrestore(&ide_lock, flags); | |
1189 | return ide_started; | |
1190 | } | |
1191 | ||
1192 | /* | |
1193 | * First, reset any device state data we were maintaining | |
1194 | * for any of the drives on this interface. | |
1195 | */ | |
1196 | for (unit = 0; unit < MAX_DRIVES; ++unit) | |
1197 | pre_reset(&hwif->drives[unit]); | |
1198 | ||
1199 | #if OK_TO_RESET_CONTROLLER | |
1200 | if (!IDE_CONTROL_REG) { | |
1201 | spin_unlock_irqrestore(&ide_lock, flags); | |
1202 | return ide_stopped; | |
1203 | } | |
1204 | ||
1205 | /* | |
1206 | * Note that we also set nIEN while resetting the device, | |
1207 | * to mask unwanted interrupts from the interface during the reset. | |
1208 | * However, due to the design of PC hardware, this will cause an | |
1209 | * immediate interrupt due to the edge transition it produces. | |
1210 | * This single interrupt gives us a "fast poll" for drives that | |
1211 | * recover from reset very quickly, saving us the first 50ms wait time. | |
1212 | */ | |
1213 | /* set SRST and nIEN */ | |
1214 | hwif->OUTBSYNC(drive, drive->ctl|6,IDE_CONTROL_REG); | |
1215 | /* more than enough time */ | |
1216 | udelay(10); | |
1217 | if (drive->quirk_list == 2) { | |
1218 | /* clear SRST and nIEN */ | |
1219 | hwif->OUTBSYNC(drive, drive->ctl, IDE_CONTROL_REG); | |
1220 | } else { | |
1221 | /* clear SRST, leave nIEN */ | |
1222 | hwif->OUTBSYNC(drive, drive->ctl|2, IDE_CONTROL_REG); | |
1223 | } | |
1224 | /* more than enough time */ | |
1225 | udelay(10); | |
1226 | hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE; | |
1227 | hwgroup->polling = 1; | |
1228 | __ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL); | |
1229 | ||
1230 | /* | |
1231 | * Some weird controller like resetting themselves to a strange | |
1232 | * state when the disks are reset this way. At least, the Winbond | |
1233 | * 553 documentation says that | |
1234 | */ | |
1235 | if (hwif->resetproc != NULL) { | |
1236 | hwif->resetproc(drive); | |
1237 | } | |
1238 | ||
1239 | #endif /* OK_TO_RESET_CONTROLLER */ | |
1240 | ||
1241 | spin_unlock_irqrestore(&ide_lock, flags); | |
1242 | return ide_started; | |
1243 | } | |
1244 | ||
1245 | /* | |
1246 | * ide_do_reset() is the entry point to the drive/interface reset code. | |
1247 | */ | |
1248 | ||
1249 | ide_startstop_t ide_do_reset (ide_drive_t *drive) | |
1250 | { | |
1251 | return do_reset1(drive, 0); | |
1252 | } | |
1253 | ||
1254 | EXPORT_SYMBOL(ide_do_reset); | |
1255 | ||
1256 | /* | |
1257 | * ide_wait_not_busy() waits for the currently selected device on the hwif | |
1258 | * to report a non-busy status, see comments in probe_hwif(). | |
1259 | */ | |
1260 | int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout) | |
1261 | { | |
1262 | u8 stat = 0; | |
1263 | ||
1264 | while(timeout--) { | |
1265 | /* | |
1266 | * Turn this into a schedule() sleep once I'm sure | |
1267 | * about locking issues (2.5 work ?). | |
1268 | */ | |
1269 | mdelay(1); | |
1270 | stat = hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]); | |
1271 | if ((stat & BUSY_STAT) == 0) | |
1272 | return 0; | |
1273 | /* | |
1274 | * Assume a value of 0xff means nothing is connected to | |
1275 | * the interface and it doesn't implement the pull-down | |
1276 | * resistor on D7. | |
1277 | */ | |
1278 | if (stat == 0xff) | |
1279 | return -ENODEV; | |
1280 | } | |
1281 | return -EBUSY; | |
1282 | } | |
1283 | ||
1284 | EXPORT_SYMBOL_GPL(ide_wait_not_busy); | |
1285 |