[deliverable/linux.git] / drivers / iio / accel / Kconfig

#
# Accelerometer drivers
#
# When adding new entries keep the list in alphabetical order

menu "Accelerometers"

config BMA180
	tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say Y here if you want to build a driver for the Bosch BMA180 or
	  BMA250 triaxial acceleration sensor.

	  To compile this driver as a module, choose M here: the
	  module will be called bma180.

config BMC150_ACCEL
	tristate "Bosch BMC150 Accelerometer Driver"
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select REGMAP
	select BMC150_ACCEL_I2C if I2C
	select BMC150_ACCEL_SPI if SPI
	help
	  Say yes here to build support for the following Bosch accelerometers:
	  BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.

	  This is a combo module with both accelerometer and magnetometer.
	  This driver is only implementing accelerometer part, which has
	  its own address and register map.

config BMC150_ACCEL_I2C
	tristate
	select REGMAP_I2C

config BMC150_ACCEL_SPI
	tristate
	select REGMAP_SPI

config HID_SENSOR_ACCEL_3D
	depends on HID_SENSOR_HUB
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select HID_SENSOR_IIO_COMMON
	select HID_SENSOR_IIO_TRIGGER
	tristate "HID Accelerometers 3D"
	help
	  Say yes here to build support for the HID SENSOR
	  accelerometers 3D.

	  To compile this driver as a module, choose M here: the
	  module will be called hid-sensor-accel-3d.

config IIO_ST_ACCEL_3AXIS
	tristate "STMicroelectronics accelerometers 3-Axis Driver"
	depends on (I2C || SPI_MASTER) && SYSFS
	select IIO_ST_SENSORS_CORE
	select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
	select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
	help
	  Say yes here to build support for STMicroelectronics accelerometers:
	  LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
	  LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12.

	  This driver can also be built as a module. If so, these modules
	  will be created:
	  - st_accel (core functions for the driver [it is mandatory]);
	  - st_accel_i2c (necessary for the I2C devices [optional*]);
	  - st_accel_spi (necessary for the SPI devices [optional*]);

	  (*) one of these is necessary to do something.

config IIO_ST_ACCEL_I2C_3AXIS
	tristate
	depends on IIO_ST_ACCEL_3AXIS
	depends on IIO_ST_SENSORS_I2C

config IIO_ST_ACCEL_SPI_3AXIS
	tristate
	depends on IIO_ST_ACCEL_3AXIS
	depends on IIO_ST_SENSORS_SPI

config KXSD9
	tristate "Kionix KXSD9 Accelerometer Driver"
	depends on SPI
	help
	  Say yes here to build support for the Kionix KXSD9 accelerometer.
	  Currently this only supports the device via an SPI interface.

	  To compile this driver as a module, choose M here: the module
	  will be called kxsd9.

config KXCJK1013
	tristate "Kionix 3-Axis Accelerometer Driver"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say Y here if you want to build a driver for the Kionix KXCJK-1013
	  triaxial acceleration sensor. This driver also supports KXCJ9-1008
	  and KXTJ2-1009.

	  To compile this driver as a module, choose M here: the module will
	  be called kxcjk-1013.

config MMA7455
	tristate
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER

config MMA7455_I2C
	tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver"
	depends on I2C
	select MMA7455
	select REGMAP_I2C
	help
	  Say yes here to build support for the Freescale MMA7455L and
	  MMA7456L 3-axis accelerometer.

	  To compile this driver as a module, choose M here: the module
	  will be called mma7455_i2c.

config MMA7455_SPI
	tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver"
	depends on SPI_MASTER
	select MMA7455
	select REGMAP_SPI
	help
	  Say yes here to build support for the Freescale MMA7455L and
	  MMA7456L 3-axis accelerometer.

	  To compile this driver as a module, choose M here: the module
	  will be called mma7455_spi.

config MMA8452
	tristate "Freescale MMA8452Q and similar Accelerometers Driver"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say yes here to build support for the following Freescale 3-axis
	  accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC.

	  To compile this driver as a module, choose M here: the module
	  will be called mma8452.

config MMA9551_CORE
	tristate

config MMA9551
	tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver"
	depends on I2C
	select MMA9551_CORE

	help
	  Say yes here to build support for the Freescale MMA9551L
	  Intelligent Motion-Sensing Platform Driver.

	  To compile this driver as a module, choose M here: the module
	  will be called mma9551.

config MMA9553
	tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver"
	depends on I2C
	select MMA9551_CORE
	help
	  Say yes here to build support for the Freescale MMA9553L
	  Intelligent Pedometer Platform Driver.

	  To compile this driver as a module, choose M here: the module
	  will be called mma9553.

config MXC4005
	tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select REGMAP_I2C
	help
	  Say yes here to build support for the Memsic MXC4005XC 3-axis
	  accelerometer.

	  To compile this driver as a module, choose M. The module will be
	  called mxc4005.

config MXC6255
	tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver"
	depends on I2C
	select REGMAP_I2C
	help
	  Say yes here to build support for the Memsic MXC6255 Orientation
	  Sensing Accelerometer Driver.

	  To compile this driver as a module, choose M here: the module will be
	  called mxc6255.

config STK8312
	tristate "Sensortek STK8312 3-Axis Accelerometer Driver"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say yes here to get support for the Sensortek STK8312 3-axis
	  accelerometer.

	  Choosing M will build the driver as a module. If so, the module
	  will be called stk8312.

config STK8BA50
	tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
	depends on I2C
	depends on IIO_TRIGGER
	help
	  Say yes here to get support for the Sensortek STK8BA50 3-axis
	  accelerometer.

	  Choosing M will build the driver as a module. If so, the module
	  will be called stk8ba50.

endmenu
Commit	Line	Data
45fe6f7d	1	#
	2	# Accelerometer drivers
	3	#
3edc84e6 LPC	4	# When adding new entries keep the list in alphabetical order
3edc84e6 LPC	5
45fe6f7d	6	menu "Accelerometers"
45fe6f7d	7
fdadbce0	8	config BMA180
2017cff2	9	tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
fdadbce0 OK	10	depends on I2C
	11	select IIO_BUFFER
	12	select IIO_TRIGGERED_BUFFER
	13	help
2017cff2 PM	14	Say Y here if you want to build a driver for the Bosch BMA180 or
2017cff2 PM	15	BMA250 triaxial acceleration sensor.
fdadbce0 OK	16
	17	To compile this driver as a module, choose M here: the
	18	module will be called bma180.
	19
bd7fe5b7 SP	20	config BMC150_ACCEL
bd7fe5b7 SP	21	tristate "Bosch BMC150 Accelerometer Driver"
bd7fe5b7 SP	22	select IIO_BUFFER
bd7fe5b7 SP	23	select IIO_TRIGGERED_BUFFER
4011eda6	24	select REGMAP
55637c38	25	select BMC150_ACCEL_I2C if I2C
f9ab96e2	26	select BMC150_ACCEL_SPI if SPI
bd7fe5b7	27	help
8ecbb3c3 LP	28	Say yes here to build support for the following Bosch accelerometers:
	29	BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.
	30
bd7fe5b7 SP	31	This is a combo module with both accelerometer and magnetometer.
	32	This driver is only implementing accelerometer part, which has
	33	its own address and register map.
	34
55637c38 MP	35	config BMC150_ACCEL_I2C
	36	tristate
	37	select REGMAP_I2C
	38
f9ab96e2 MP	39	config BMC150_ACCEL_SPI
	40	tristate
	41	select REGMAP_SPI
	42
45fe6f7d	43	config HID_SENSOR_ACCEL_3D
	44	depends on HID_SENSOR_HUB
	45	select IIO_BUFFER
	46	select IIO_TRIGGERED_BUFFER
	47	select HID_SENSOR_IIO_COMMON
9541cc39	48	select HID_SENSOR_IIO_TRIGGER
ace43fce	49	tristate "HID Accelerometers 3D"
45fe6f7d	50	help
	51	Say yes here to build support for the HID SENSOR
	52	accelerometers 3D.
	53
88f4c6c4 RD	54	To compile this driver as a module, choose M here: the
	55	module will be called hid-sensor-accel-3d.
	56
d6251168 DC	57	config IIO_ST_ACCEL_3AXIS
	58	tristate "STMicroelectronics accelerometers 3-Axis Driver"
	59	depends on (I2C \|\| SPI_MASTER) && SYSFS
	60	select IIO_ST_SENSORS_CORE
	61	select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
	62	select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
	63	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
d6251168 DC	64	help
	65	Say yes here to build support for STMicroelectronics accelerometers:
	66	LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
34dc578d	67	LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12.
d6251168	68
341673f1 PM	69	This driver can also be built as a module. If so, these modules
341673f1 PM	70	will be created:
d6251168 DC	71	- st_accel (core functions for the driver [it is mandatory]);
	72	- st_accel_i2c (necessary for the I2C devices [optional*]);
	73	- st_accel_spi (necessary for the SPI devices [optional*]);
	74
	75	(*) one of these is necessary to do something.
	76
	77	config IIO_ST_ACCEL_I2C_3AXIS
	78	tristate
	79	depends on IIO_ST_ACCEL_3AXIS
	80	depends on IIO_ST_SENSORS_I2C
	81
	82	config IIO_ST_ACCEL_SPI_3AXIS
	83	tristate
	84	depends on IIO_ST_ACCEL_3AXIS
	85	depends on IIO_ST_SENSORS_SPI
	86
3edc84e6 LPC	87	config KXSD9
	88	tristate "Kionix KXSD9 Accelerometer Driver"
	89	depends on SPI
	90	help
	91	Say yes here to build support for the Kionix KXSD9 accelerometer.
	92	Currently this only supports the device via an SPI interface.
	93
88f4c6c4 RD	94	To compile this driver as a module, choose M here: the module
	95	will be called kxsd9.
	96
1a4fbf6a SP	97	config KXCJK1013
	98	tristate "Kionix 3-Axis Accelerometer Driver"
	99	depends on I2C
	100	select IIO_BUFFER
	101	select IIO_TRIGGERED_BUFFER
	102	help
	103	Say Y here if you want to build a driver for the Kionix KXCJK-1013
c6861377 DB	104	triaxial acceleration sensor. This driver also supports KXCJ9-1008
c6861377 DB	105	and KXTJ2-1009.
1a4fbf6a SP	106
	107	To compile this driver as a module, choose M here: the module will
	108	be called kxcjk-1013.
	109
a84ef0d1 JE	110	config MMA7455
	111	tristate
	112	select IIO_BUFFER
	113	select IIO_TRIGGERED_BUFFER
	114
	115	config MMA7455_I2C
	116	tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver"
	117	depends on I2C
	118	select MMA7455
	119	select REGMAP_I2C
	120	help
	121	Say yes here to build support for the Freescale MMA7455L and
	122	MMA7456L 3-axis accelerometer.
	123
	124	To compile this driver as a module, choose M here: the module
	125	will be called mma7455_i2c.
	126
	127	config MMA7455_SPI
	128	tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver"
	129	depends on SPI_MASTER
	130	select MMA7455
	131	select REGMAP_SPI
	132	help
	133	Say yes here to build support for the Freescale MMA7455L and
	134	MMA7456L 3-axis accelerometer.
	135
	136	To compile this driver as a module, choose M here: the module
	137	will be called mma7455_spi.
	138
8838cc7f	139	config MMA8452
c5ea1b58	140	tristate "Freescale MMA8452Q and similar Accelerometers Driver"
8838cc7f HK	141	depends on I2C
	142	select IIO_BUFFER
	143	select IIO_TRIGGERED_BUFFER
	144	help
c5ea1b58	145	Say yes here to build support for the following Freescale 3-axis
244a93f6	146	accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC.
8838cc7f HK	147
	148	To compile this driver as a module, choose M here: the module
	149	will be called mma8452.
	150
d5b97f5c IT	151	config MMA9551_CORE
	152	tristate
	153
c78b9171 VD	154	config MMA9551
	155	tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver"
	156	depends on I2C
d5b97f5c IT	157	select MMA9551_CORE
d5b97f5c IT	158
c78b9171 VD	159	help
	160	Say yes here to build support for the Freescale MMA9551L
	161	Intelligent Motion-Sensing Platform Driver.
	162
	163	To compile this driver as a module, choose M here: the module
	164	will be called mma9551.
	165
40cb7613 IT	166	config MMA9553
	167	tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver"
	168	depends on I2C
	169	select MMA9551_CORE
	170	help
	171	Say yes here to build support for the Freescale MMA9553L
	172	Intelligent Pedometer Platform Driver.
	173
	174	To compile this driver as a module, choose M here: the module
	175	will be called mma9553.
90bad33a	176
077377fc TB	177	config MXC4005
	178	tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver"
	179	depends on I2C
1ce0eda0 TB	180	select IIO_BUFFER
1ce0eda0 TB	181	select IIO_TRIGGERED_BUFFER
077377fc TB	182	select REGMAP_I2C
	183	help
	184	Say yes here to build support for the Memsic MXC4005XC 3-axis
	185	accelerometer.
	186
	187	To compile this driver as a module, choose M. The module will be
	188	called mxc4005.
	189
75b6548f TB	190	config MXC6255
	191	tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver"
	192	depends on I2C
	193	select REGMAP_I2C
	194	help
	195	Say yes here to build support for the Memsic MXC6255 Orientation
	196	Sensing Accelerometer Driver.
	197
	198	To compile this driver as a module, choose M here: the module will be
	199	called mxc6255.
	200
90bad33a TB	201	config STK8312
	202	tristate "Sensortek STK8312 3-Axis Accelerometer Driver"
	203	depends on I2C
946448e0 HK	204	select IIO_BUFFER
946448e0 HK	205	select IIO_TRIGGERED_BUFFER
90bad33a TB	206	help
	207	Say yes here to get support for the Sensortek STK8312 3-axis
	208	accelerometer.
	209
	210	Choosing M will build the driver as a module. If so, the module
	211	will be called stk8312.
	212
884ca456 TB	213	config STK8BA50
	214	tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
	215	depends on I2C
01cc5235	216	depends on IIO_TRIGGER
884ca456 TB	217	help
	218	Say yes here to get support for the Sensortek STK8BA50 3-axis
	219	accelerometer.
	220
	221	Choosing M will build the driver as a module. If so, the module
	222	will be called stk8ba50.
	223
45fe6f7d	224	endmenu